Grizzly Dust Collector G1028Z G1029 User Manual

DUST COLLECTOR  
MODEL G1028Z/G1029  
INSTRUCTION MANUAL  
COPYRIGHT © 1991 BY GRIZZLY IMPORTS, INC.REG # TX 3170576  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC.  
REVISED FEBRUARY, 2002. PRINTED IN TAIWAN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table Of Contents  
PAGE  
1. SAFETY  
SAFETY INSTRUCTIONS FOR POWER TOOLS ..................................................2  
ADDITIONAL SAFETY INSTRUCTIONS FOR DUST COLLECTORS....................4  
2. CIRCUIT REQUIREMENTS  
G1028Z ....................................................................................................................5  
G1029 ......................................................................................................................5  
GROUNDING ..........................................................................................................6  
EXTENSION CORDS ..............................................................................................6  
3. INTRODUCTION  
COMMENTARY........................................................................................................7  
UNPACKING ............................................................................................................8  
PIECE INVENTORY ................................................................................................8  
CLEAN UP................................................................................................................9  
SITE CONSIDERATIONS ........................................................................................9  
4. ASSEMBLY  
BEGINNING ASSEMBLY ......................................................................................10  
BASE ......................................................................................................................10  
COLLECTOR BODY ..............................................................................................11  
OUTLET..................................................................................................................11  
SUPPORT BRACKETS..........................................................................................12  
COLLECTOR..........................................................................................................12  
FLEX HOSE ..........................................................................................................13  
BAG ..................................................................................................................13-14  
INLET......................................................................................................................14  
5. DESIGNING THE SYSTEM  
GENERAL ..............................................................................................................15  
MATERIAL SELECTION ..................................................................................15-16  
SYSTEM GROUNDING ....................................................................................16-17  
DESIGN SUGGESTIONS ......................................................................................18  
6. OPERATIONS  
TEST RUN..............................................................................................................19  
GENERAL ..............................................................................................................19  
7. MAINTENANCE  
GENERAL ..............................................................................................................20  
LUBRICATION........................................................................................................20  
BAG CLEANING ....................................................................................................20  
8. CLOSURE ....................................................................................................................21  
WIRE DIAGRAM ................................................................................................................22  
MACHINE DATA................................................................................................................23  
PARTS BREAKDOWN AND PARTS LISTS................................................................24-25  
WARRANTY AND RETURNS ..........................................................................................26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 1: SAFETY  
For Your Own Safety Read Instruction  
Manual Before Operating This Equipment  
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This  
manual uses a series of symbols and signal words which are intended to convey the level of  
importance of the safety messages. The progression of symbols is described below. Remember  
that safety messages by themselves do not eliminate danger and are not a substitute for proper  
accident prevention measures.  
Indicates an imminently hazardous situation which, if not avoided,  
WILL result in death or serious injury.  
Indicates a potentially hazardous situation which, if not avoided,  
COULD result in death or serious injury.  
Indicates a potentially hazardous situation which, if not avoided,  
MAY result in minor or moderate injury. It may also be used to alert  
against unsafe practices.  
This symbol is used to alert the user to useful information about  
proper operation of the equipment.  
NOTICE  
Safety Instructions For Power Tools  
1. KEEP GUARDS IN PLACE and in working  
5. KEEP CHILDREN AND VISITORS  
AWAY. All children and visitors should be  
kept a safe distance from work area.  
order.  
2. REMOVE ADJUSTING KEYS AND  
WRENCHES. Form habit of checking to  
see that keys and adjusting wrenches are  
removed from tool before turning on.  
6. MAKE WORKSHOP CHILD PROOF with  
padlocks, master switches, or by removing  
starter keys.  
3. KEEP WORK AREA CLEAN. Cluttered  
7. DO NOT FORCE TOOL. It will do the job  
better and safer at the rate for which it was  
designed.  
areas and benches invite accidents.  
4. DO NOT USE IN DANGEROUS ENVI-  
RONMENT. Do not use power tools in  
damp or wet locations, or where any flam-  
mable or noxious fumes may exist. Keep  
work area well lighted.  
8. USE RIGHT TOOL. Do not force tool or  
attachment to do a job for which it was not  
designed.  
-2-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions For Power Tools Cont.  
15. DO NOT OVER-REACH. Keep proper  
9. USE PROPER EXTENSION CORD.  
Make sure your extension cord is in good  
condition. Conductor size should be in  
accordance with the chart below. The  
amperage rating should be listed on the  
motor or tool nameplate. An undersized  
cord will cause a drop in line voltage  
resulting in loss of power and overheating.  
Your extension cord must also contain a  
ground wire and plug pin. Always repair or  
replace extension cords if they become  
damaged.  
footing and balance at all times.  
16. REDUCE THE RISK OF UNINTENTION-  
AL STARTING. On machines with mag-  
netic contact starting switches there is a  
risk of starting if the machine is bumped or  
jarred. Always disconnect from power  
source before adjusting or servicing. Make  
sure switch is in OFF position before recon-  
necting.  
17. MANY WOODWORKING TOOLS CAN  
“KICKBACK” THE WORKPIECE toward the  
operator if not handled properly. Know what  
conditions can create “kickback” and know  
how to avoid them. Read the manual accom-  
panying the machine thoroughly.  
Minimum Gauge for Extension Cords  
LENGTH  
AMP RATING  
0-6  
25ft  
18  
18  
16  
14  
12  
10  
50ft 100ft  
16  
16  
16  
12  
12  
10  
16  
14  
14  
12  
10  
No  
7-10  
11-12  
13-16  
17-20  
18. CHECK DAMAGED PARTS. Before fur-  
ther use of the tool, a guard or other part  
that is damaged should be carefully  
checked to determine that it will operate  
properly and perform its intended function.  
Check for alignment of moving parts, bind-  
ing of moving parts, breakage of parts,  
mounting, and any other conditions that  
may affect its operation. A guard or other  
part that is damaged should be properly  
repaired or replaced.  
21-30  
10. WEAR PROPER APPAREL. Do not wear  
loose clothing, gloves, neckties, rings,  
bracelets, or other jewelry which may get  
caught in moving parts. Non-slip footwear  
is recommended. Wear protective hair  
covering to contain long hair.  
19. NEVER LEAVE TOOL RUNNING UNAT-  
TENDED. TURN POWER OFF. Do not  
leave tool until it comes to a complete stop.  
11. ALWAYS USE SAFETY GLASSES. Also  
use face or dust mask if cutting operation is  
dusty. Everyday eyeglasses only have  
impact resistant lenses, they are NOT safety  
glasses.  
20. NEVER OPERATE A MACHINE WHEN  
TIRED, OR UNDER THE INFLUENCE OF  
DRUGS OR ALCOHOL. Full mental alert-  
ness is required at all times when running a  
machine.  
12. SECURE WORK. Use clamps or a vise to  
hold work when practical. It’s safer than using  
your hand and frees both hands to operate  
tool.  
21. NEVER ALLOW UNSUPERVISED OR  
UNTRAINED PERSONNEL TO OPER-  
ATE THE MACHINE. Make sure any  
instructions you give in regards to machine  
operation are approved, correct, safe, and  
clearly understood.  
13. MAINTAIN TOOLS WITH CARE. Keep  
tools sharp and clean for best and safest  
performance. Follow instructions for lubri-  
cating and changing accessories.  
22. IF AT ANY TIME YOU ARE EXPERIENC-  
ING DIFFICULTIES performing the intend-  
ed operation, stop using the machine! Then  
contact our service department or ask a  
qualified expert how the operation should  
be performed.  
14. USE RECOMMENDED ACCESSORIES.  
Consult the owner’s manual for recom-  
mended accessories. The use of improper  
accessories may cause risk of injury.  
G1028Z/G1029 Dust Collector  
-3-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Safety Instructions For  
The Dust Collector  
1. THIS DUST COLLECTOR IS TO BE USED  
5. DO NOT ALLOW STEEL TO STRIKE  
FOR WOOD DUST COLLECTION ONLY.  
Do not use this dust collector to pick up liq-  
uids and metal scrap including, but not lim-  
ited to, nails and filings. Metallic debris will  
contact the spinning impeller and could  
spark. The spark could then cause a saw-  
dust explosion and severe fire hazard. Also,  
do not pick up material which cannot safely  
pass through the impeller such as solid  
wood scraps.  
AGAINST STEEL WHICH MAY PRODUCE  
A SPARK. Sparks can smolder in wood  
dust for a long time before fire or flame is  
detected. If metal contacts metal during  
operation, immediately turn off the dust col-  
lector, unplug the power cord from the outlet  
or flip the disconnect switch and wait for all  
moving parts to stop. Remove collection  
bags and empty the dust into an approved  
air tight metal container in case of spark.  
Remedy the metal to metal contact problem  
before resuming operation.  
2. DO NOT PLACE YOUR HANDS OR  
TOOLS NEAR THE OPEN INLET during  
operation for any reason including, but not  
limited to, unclogging material and testing  
suction. The impeller could cause serious  
damage to body parts if touched while spin-  
ning.  
6. WHEN EMPTYING DUST FROM THE  
COLLECTION BAGS, wear a respirator  
and safety glasses. Empty dust into an  
approved container and dispose of properly.  
7. IF AT ANY TIME YOU ARE EXPERIENC-  
ING DIFFICULTIES PERFORMING THE  
INTENDED OPERATION, stop using the  
machine! Then contact our service depart-  
ment or ask a qualified expert how the oper-  
ation should be performed.  
3. PROBLEMS CONCERNED WITH ANY  
MOVING PARTS or accessories must be  
investigated and corrected with the power  
disconnected and after everything has  
come to a complete stop.  
4. SUSPENDED DUST PARTICLES IN CON-  
JUNCTION WITH AN IGNITION SOURCE,  
may cause an explosion. Do not operate the  
dust collector in areas where explosion risks  
would be high if dust were dispersed into the  
area. Areas of high risk include, but are not  
limited to, areas near pilot lights and/or open  
flames.  
8. BE AWARE THAT CERTAIN WOODS  
MAY CAUSE AN ALLERGIC reaction in  
people and animals, especially when  
exposed to fine dust. Make sure you know  
what type of wood dust you will be exposed  
to in case there is a possibility of an allergic  
reaction. Always wear an approved respira-  
tor!  
No list of safety guidelines can be com-  
plete. Every shop environment is different.  
Always consider safety first, as it applies to  
your individual working conditions. Use  
this and other machinery with caution and  
respect. Failure to follow guidelines could  
result in serious personal injury, damage to  
equipment or poor work results.  
DO NOT use the dust collector for any other  
purpose besides collecting dust from con-  
nected woodworking machines. A dust col-  
lector should NEVER be used as an air  
cleaner. For safest use, wear a dust mask  
and use an air cleaner in addition to the  
dust collector.  
-4-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 2: CIRCUIT REQUIREMENTS  
G1028Z Wiring  
G1029 Wiring  
The G1028Z Dust Collector is pre-wired for 110V,  
but can be rewired for 220V. Refer to the wiring  
diagram included with this manual for instruction.  
Do not attempt to rewire the motor if the diagram  
is missing. Contact the appropriate service center  
for more information.  
The G1029 Dust Collector is pre-wired for 220V.  
A plug is not provided with the G1029. Refer to  
Figure 1 for recommended 220V receptacle.  
Circuit Breaker: The 2 H.P. motor will draw  
roughly 12 amps @ 220V. We recommend using  
a 20 amp circuit breaker. Circuit breakers rated  
higher will not adequately protect the motor. If you  
are using a fuse, we recommend 30 amp slow  
blow 220V service. Fuses rated higher will not  
adequately protect the motor.  
A plug is not provided with the G1028Z. It will be  
necessary to purchase a standard 110V plug from  
your local hardware store. If you are rewiring for  
220V, see Figure 1 for the recommended 220V  
receptacle.  
Circuit Breaker: The 112 H.P. motor will draw  
roughly 18 amps at 110V or 9 amps at 220V. We  
recommend a using 20 amp circuit breaker for  
110V or 220V operation. Circuit breakers rated  
higher will not adequately protect the circuit. If you  
are using a fuse, we recommend a 30 amp slow  
blow for 110V or 220V operation. Fuses rated  
higher will not adequately protect the circuit.  
Figure 1. Recommended 220V receptacle.  
G1028Z/G1029 Dust Collector  
-5-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Grounding  
Extension Cords  
In the event of an electrical short, grounding pro-  
vides electric current a path of least resistance to  
reduce the risk of electrical shock. This tool is  
equipped with an electric cord having an equip-  
ment-grounding conductor which must be proper-  
ly connected to a grounding plug. The plug must  
be plugged into a matching outlet that is properly  
installed and grounded in accordance with all  
local codes and ordinances.  
We do not recommend the use of extension cords  
with 220V equipment. Instead, arrange the place-  
ment of your equipment and the installed wiring to  
eliminate the need for extension cords. Should  
the situation be necessary to use an extension,  
make sure the cord is rated Hard Service (grade  
S) or better. Refer to the chart in Section 1:  
Safety Instructions to determine the minimum  
gauge for the extension cord when using either  
110V or 220V. The extension cord must also con-  
tain a ground wire and plug pin. Always repair or  
replace extension cords when they become worn  
or damaged.  
Improper connections of the electrical-grounding  
conductor can result in the risk of electric shock.  
The conductor with green or green and yellow  
striped insulation is the electrical-grounding con-  
ductor. If repair or replacement of the electric cord  
or plug is necessary, do not connect the equip-  
ment grounding conductor to a live terminal.  
We have covered some basic electrical  
requirements for the safe operation of  
your machine. These requirements are not  
necessarily comprehensive. You must be  
sure that your particular electrical configu-  
ration complies with local and state codes.  
Ensure compliance by checking with your  
local municipality or a licensed electrician.  
This equipment must be  
grounded. Verify that any  
existing electrical outlet  
and circuit you intend to  
plug into is actually  
grounded. Under no cir-  
cumstances should the  
grounding pin from any  
three-pronged plug be  
removed. Serious injury  
may occur.  
If you are unsure about  
the correct installation or  
modification of electrical  
circuits, please consult  
the advice of a qualified  
electrician. Failure to do  
so could result in serious  
personal injury.  
-6-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 3: INTRODUCTION  
Most important, we stand behind our machines. If  
you have any service questions or parts requests,  
please call or write us at the location listed below.  
Commentary  
Grizzly Industrial, Inc.  
1203 Lycoming Mall Circle  
Muncy, PA 17756  
Phone: (570) 546-9663  
Fax: (800) 438-5901  
Grizzly Industrial, Inc. is proud to offer the Model  
G1028Z/G1029 Dust Collector. These dust col-  
lectors are a part of Grizzly’s growing family of  
fine machinery. When used according to the  
guidelines set forth in this manual, you can expect  
years of trouble-free, enjoyable operation and  
proof of Grizzly’s commitment to customer satis-  
faction.  
The specifications, drawings, and photographs  
illustrated in this manual represent the Model  
G1028Z/G1029 as supplied when the manual  
was prepared. However, owing to Grizzly’s policy  
of continuous improvement, changes may be  
made at any time with no obligation on the part of  
Grizzly. Whenever possible, though, we send  
manual updates to all owners of a particular tool  
or machine. Should you receive one, we urge you  
to insert the new information with the old and keep  
it for reference.  
The G1028Z/G1029 Dust Collector represents the  
mid-range of our broad line of dust collectors.  
Standard features for both dust collectors include  
a push button switch, cyclone collector, and two  
large filter/collection bags. The G1028Z has a 112  
H.P. motor which is pre-wired for 110V and has a  
6" intake port. Air movement is 1400 cubic feet  
per minute with a static pressure of 9". The G1029  
features a 2 H.P. motor which is pre-wired for  
220V and has a 6" inlet. Air movement is 1600  
cubic feet per minute with a static pressure of 11".  
We also offer a full line of optional accessories to  
build a collection system for a single machine or a  
complete shop including a two-stage adapter and  
a dust collection reference book. All accessories  
are offered through the current Grizzly catalog.  
Read the manual before  
assembly and opera-  
tion. Become familiar  
with the machine and its  
operation before begin-  
ning any work. Serious  
personal injury may  
result if safety or opera-  
tional information is not  
understood or followed.  
We are also pleased to provide this manual with  
the Model G1028Z/G1029. It was written to guide  
you through assembly, review safety considera-  
tions, and cover general operating procedures. It  
represents our effort to produce the best docu-  
mentation possible. If you have any comments  
regarding this manual, please write to us at the  
address below:  
Grizzly Industrial, Inc.  
Technical Documentation  
P.O. Box 2069  
C
/O  
Bellingham, WA 98227-2069  
G1028Z/G1029 Dust Collector  
-7-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
Piece Inventory  
After all the parts have been removed from the  
carton, you should have:  
• Collector Body Assembly  
• Base  
The Model G1028Z/G1029 Dust Collector is  
shipped from the manufacturer in a carefully  
packed carton. If you discover the machine is  
damaged after you’ve signed for delivery, please  
call Customer Service immediately for advice.  
• “Y” Inlet  
• Collection/Filter Bags  
• Lower Support Brackets (2)  
• Casters (4)  
Save the containers and all packing materials for  
possible inspection by the carrier or its agent.  
Otherwise filing a freight claim can be difficult.  
• Rubber Gasket  
• Upper Support Bracket  
• Outlet  
• Outlet Hose  
When you are completely satisfied with the con-  
dition of your shipment, you should inventory its  
parts.  
• Hose Clamps  
• Hex Bolts 516"-18 x 12" (36)  
In the event that any non-proprietary parts are  
missing (e.g. a nut or a washer), we would be  
glad to replace them, or, for the sake of expedi-  
ency, replacements can be obtained at your local  
hardware store.  
The G1028Z/G1029 is a  
heavy machine, 116/140  
lbs. shipping weight.  
DO NOT over-exert  
yourself while unpack-  
ing or moving your  
machine – you will need  
assistance. Serious per-  
sonal injury may occur  
if safe moving methods  
are not followed.  
NOTICE  
A full parts list and breakdown can be found  
toward the end of this manual. For easier  
assembly, or to identify missing parts,  
please refer to the detailed illustrations at  
the end of the manual.  
Some metal parts may  
have sharp edges on  
them after they are  
formed. Please examine  
the edges of all metal  
parts before handling  
them. Failure to do so  
could result in injury.  
-8-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clean Up  
Site Considerations  
The unpainted surfaces are coated with a waxy oil  
to protect them from corrosion during shipment.  
Remove this protective coating with a solvent  
cleaner or citrus-based degreaser such as  
Grizzly’s G7895 Degreaser. Avoid chlorine-based  
solvents as they may damage painted surfaces  
should they come in contact. Always follow the  
usage instructions on the product you choose for  
clean up.  
FLOOR LOAD  
Your Model G1028Z/G1029 represents a moder-  
ate weight load in an average footprint. Most com-  
mercial or home shop floors should be sufficient  
to carry the weight of the Model G1028Z/G1029.  
If you question the strength of your floor, you can  
opt to reinforce it.  
WORKING CLEARANCES  
Working clearances can be thought of as the dis-  
tances between machines and obstacles that  
allow safe operation of every machine without lim-  
itation. Consider existing and anticipated machine  
needs, size of material to be processed through  
each machine, and space for auxiliary stands  
and/or work tables. Also, consider the relative  
position of each machine to one another for effi-  
cient material handling. Be sure to allow yourself  
sufficient room to safely run your machines in any  
foreseeable operation and keep dust collection  
hoses off the floor and out of the way.  
Do not use gasoline or  
other petroleum-based  
solvents. They have low  
flash points which make  
them extremely flamma-  
ble. A risk of explosion  
and burning exists if  
these products are  
used. Serious personal  
injury may occur if this  
warning is ignored.  
LIGHTING AND OUTLETS  
Lighting should be bright enough to eliminate  
shadows and prevent eye strain. Electrical circuits  
should be dedicated or large enough to handle  
combined motor amp loads. Outlets should be  
located near each machine so power or extension  
cords are not obstructing high-traffic areas. Be  
sure to observe local electrical codes for proper  
installation of new lighting, outlets, or circuits.  
Do not smoke while using  
solvents. A risk of explo-  
sion or fire exists and may  
result in serious personal  
injury.  
Many of the solvents  
commonly used to clean  
machinery can be toxic  
when inhaled or ingest-  
ed. Always work in well-  
ventilated areas far from  
potential ignition sources  
when dealing with sol-  
vents. Use care when dis-  
posing of waste rags and  
towels to be sure they do  
not create fire or environ-  
mental hazards.  
Make your shop “child  
safe.” Ensure that your  
workplace is inaccessible  
to youngsters by closing  
and locking all entrances  
when you are away. Never  
allow visitors in your shop  
when assembling, adjust-  
ing or operating equip-  
ment.  
G1028Z/G1029 Dust Collector  
-9-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 4: ASSEMBLY  
Beginning Assembly  
Base  
Position the base plate upside down and locate  
the casters so they are within easy reach. Mount  
the casters to the base plate using sixteen (16)  
516"-18 x 12" hex bolts provided. See Figure 2.  
Disconnect power to the  
machine when perform-  
ing any maintenance,  
assembly or adjust-  
ments. Failure to do this  
may result in serious  
personal injury.  
Keep loose clothing  
rolled up and out of the  
way of machinery and  
keep hair pulled back.  
Wear safety glasses dur-  
ing the entire assembly  
process. Failure to com-  
ply may result in serious  
personal injury.  
Figure 2. Mounting casters to base.  
Some metal parts may  
have sharp edges on  
them after they are  
formed. Please examine  
the edges of all metal  
parts before handling  
them. Failure to do so  
could result in injury.  
We have organized the assembly process into  
steps. Please follow along in the order presented  
here.  
Tools Required: 12mm open end wrench, regu-  
lar and Phillips head screwdriver.  
-10-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Collector Body  
Outlet  
The collector body includes the fan assembly,  
switch, and motor which are preassembled at the  
factory. Set the collector body on top of the base  
plate so the intake portion is near the edge of the  
base plate and the bolt holes are lined up as  
shown in Figure 3. Secure the collector body to  
the base plate with four (4) 516"-18 x 12" hex bolts  
provided.  
The outlet can now be attached to the main col-  
lector body. Insert the rubber gasket between  
the collector and lower outlet flange and secure  
using eight (8) 16"-18 x 2" hex bolts provided.  
See Figure 4.  
5
1
Figure 4. Mounting outlet to collector body.  
Figure 3. Mounting collector to base.  
G1028Z/G1029 Dust Collector  
-11-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Support Brackets  
Collector  
There are two lower collector support brackets  
and one upper bag support bracket. Attach the  
collector brackets to the top edge of the base  
plate using four (4) 516"-18 x 12" hex bolts provid-  
ed, as shown in Figure 5.  
The collector attaches to each support bracket.  
The inside of the collector is funnel shaped and  
directs the air around in a cyclone motion. Make  
sure that the inside taper (funnel) is faced down-  
ward and the collector inlet faces toward the col-  
lector body.  
Secure the front support bracket to the collector  
5
3
with two (2) 16"-18 x 4" hex bolts provided.  
Before securing the rear support bracket to the  
collector, line up the upper bag support bracket  
bolt holes with the collector support bracket bolt  
5
holes and the collector. Secure with two (2) 16"-  
18 x 34" bolts provided, as shown in Figure 6.  
Figure 5. Mounting brackets to base.  
Figure 6. Mounting collector to brackets.  
-12-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Flex Hose  
Bags  
Slip a loosened hose clamp over each end of the  
flex-hose and slide one end of the flex-hose over  
the outlet flange. Slide the other end of the flex-  
hose onto the collector. Tighten each hose clamp  
until snug as shown in Figure 7.  
1. Hook the top loop of the filter bag over the  
support bracket as shown in Figure 8.  
Figure 8. Attaching filter bag.  
2. Slip the top collection bag over the top edge  
of the collector and pull the strap tight to  
secure the bag as shown in Figure 9.  
Figure 7. Attaching flex hose.  
Figure 9. Securing collection bag.  
G1028Z/G1029 Dust Collector  
-13-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Slip the steel band around the bag and tight-  
en down as shown in Figure 10.  
Inlet  
Press the “Y” inlet onto the inlet cover flange as  
shown in Figure 11. The inlet is secured to the  
collector body by a press-on fit.  
Figure 10. Tightening steel band.  
4. Slip the bottom collection bag over the bot-  
tom edge of the collector and pull the strap  
tight to secure the bag.  
Figure 11. Installing “Y” inlet.  
5. Place the steel band with the quick clamp  
over the bag and clamp on the tightest notch  
possible.  
DO NOT force the clamp. Instead, choose  
the next notch over, then clamp in place.  
-14-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: Designing The System  
Material Selection  
General  
You have many choices regarding main line and  
branch line duct material. In most commercial  
workshops, the main line and branch lines are  
usually metal duct. Flexible hose is then used to  
connect each machine to the branch lines. In the  
case of small home shops, flexible hose may be  
used for both main line and branch line ducts.  
Plastic duct is also a popular material for home  
shops. Please be aware that there is a fire or  
explosion hazard if plastic duct material is used  
for dust collection without being grounded against  
static electrical charge build-up. This topic will be  
discussed later in the manual.  
The Model G1028Z/G1029 can be operated as  
either a stationary or a mobile unit. There are  
advantages and disadvantages to both set-ups.  
The advantage of the mobile system is eliminat-  
ing the cost of many ducts and fittings. On the  
other hand, the stationary system is more versa-  
tile and convenient.  
The Model G1028Z/G1029 is designed to be a  
central dust collector system. Locate the dust col-  
lector in an out of the way location such as a cor-  
ner or separate room. The dust collector is capa-  
ble of collecting dust from up to two machines  
running simultaneously. Because of the large  
suction capacity of the Model G1028Z/G1029,  
great flexibility is possible in the planning and  
designing of your dust collection duct layout.  
Grizzly offers a complete line of dust collection  
accessories for setting up a stationary system.  
Additionally, Grizzly offers a complete guide book  
entitled Dust Collection Basics.  
METAL DUCT  
Metal duct comes in many varieties. Stove pipe,  
heating/ventilation duct and duct made especially  
for dust collection are all options. Advantages of  
metal duct is its conductivity and that it does not  
contribute to static electrical charge build-up.  
However, static charges are still produced when  
dust particles strike other dust particles as they  
move through the duct. Since metal duct is a con-  
ductor, it can be grounded quite easily to dissi-  
pate any static electrical charges. However, metal  
duct is generally more expensive than plastic duct  
and it is not usually airtight unless specifically  
manufactured for dust collection. Specially manu-  
factured metal duct, on the other hand, is quite  
expensive. Metal duct is also generally more diffi-  
cult to cut and assemble.  
Whatever system you choose, always make sure  
there are no open flames or pilot lights in the  
same room as the dust collector. There is a risk of  
explosion if dust is dispursed into the air.  
FLEXIBLE HOSE  
Flexible rubber hose, polyethylene, plastic flex-  
hose and other flexible ribbed hose is generally  
used for short runs, small shops and at rigid duct-  
to-tool connections. There are many different  
types of flex hose on the market today. These are  
manufactured from materials such as polyethyl-  
ene, PVC, cloth hose dipped in rubber and even  
metal, including steel and aluminum.  
G1028Z/G1029 Dust Collector  
-15-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
There are also many kinds of pure plastic flexible  
hose, such as non-perforated drainage type hose  
and dryer vent hose. Drainage type hose, while  
being economical, does not quite have the flexi-  
bility required for dust collection. The inside of the  
duct is also deeply corrugated and can increase  
the static pressure loss by as much as 50% over  
smooth wall duct. Dryer vent hose, while being  
completely flexible, is non-resistant to abrasion  
and has a tendency to collapse in a negative  
pressure system.  
System Grounding  
Since plastic hose is abundant, relatively inexpen-  
sive, easily assembled and air tight, it is a very  
popular material for conveying dust from wood-  
working machines to the dust collector. We rec-  
ommend using flexible hose (flex-hose) to con-  
nect the woodworking machine to the dust collec-  
tor. However, plastic flex-hose and plastic duct  
are an insulator, and dust particles moving  
against the walls of the plastic duct create a stat-  
ic electrical build up. This charge will build until it  
discharges to a ground. If a grounding medium is  
not available to prevent static electrical build up,  
the electrical charge will arc to the nearest  
grounded source. This electrical discharge may  
cause an explosion and subsequent fire inside the  
system.  
If using flex-hose, you should choose one of the  
many types that are designed specifically for the  
movement of solid particles, i.e. dust, grains and  
plastics. However, the cost of specifically  
designed flexible duct can vary greatly. Grizzly  
offers polyethylene hose which is well suited for  
the removal of particulate matter, especially saw-  
dust, since it is durable and completely flexible.  
Polyethylene is also very economical and avail-  
able in a wide variety of diameters and lengths for  
most applications.  
To protect against static electrical build up inside  
a non-conducting duct, a bare copper wire should  
be placed inside the duct along its length and  
grounded to the dust collector. You must also con-  
firm that the dust collector is continuously ground-  
ed through the electrical circuit to the electric ser-  
vice panel.  
PLASTIC DUCT  
The popularity of plastic duct is due to the fact that  
it is an economical and readily available product.  
It is also simple to assemble and easily sealed  
against air loss. The primary disadvantage of  
plastic duct for dust collection, whether black ABS  
or white PVC and even rubber or polyethylene  
flex-hose, is the inherent danger of static electri-  
cal build-up.  
If you connect the dust collector to more than one  
machine by way of a non-conducting branching  
duct system and blast gates, the system must still  
be grounded as mentioned above. We recom-  
mend inserting a continuous bare copper ground  
wire inside the entire duct system and attaching  
the wire to each grounded woodworking machine  
and dust collector.  
Always guard against  
static electrical build up  
by grounding all dust  
collection lines.  
-16-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Be sure that you extend the bare copper wire  
down all branches of the system. Do not forget to  
connect the wires to each other with wire nuts  
when two branches meet at a “Y” or “T” connec-  
tion.  
We also recommend wrapping the outside of all  
plastic ducts with bare copper wire to ground the  
outside of the system against static electrical build  
up. Wire connections at Y’s and T’s should be  
made with wire nuts.  
Ensure that the entire system is grounded. If  
using plastic blast gates to direct air flow, the  
grounding wire must be jumped (Figure 12)  
around the blast gate without interruption to the  
grounding system.  
Attach the bare ground wire to each stationary  
woodworking machine and attach the dust collec-  
tor frame with a ground screw as shown in Figure  
13. Ensure that each machine is continuously  
grounded to the grounding terminal in your elec-  
tric service panel.  
Plastic Blast Gate  
Ground Screw  
Flex-Hose  
Metal Duct  
Copper Ground Wire  
External Ground Wire  
Internal Ground Wire  
Figure 12. Ground jumper wire when using  
Figure 13. Flex-hose grounded to machine.  
plastic blast gates and metal duct.  
G1028Z/G1029 Dust Collector  
-17-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The best way to plan your new system is to draw  
Design Suggestions  
a bird’s eye view (as shown in  
shop and sketch the following:  
of your  
Figure 14)  
1. Your desired location of the dust collector,  
When designing a successful dust collection sys-  
tem, planning is the most important step. Before  
you set out to run the first section of duct, consid-  
er these general guidelines for an efficient sys-  
tem:  
usually in a corner or along a wall.  
2. The location of each machine in the system.  
3. The location of the main line duct and each  
branch line.  
1. Machines that produce the most saw dust  
should be placed nearest to the dust collec-  
tor. These machines include thickness plan-  
ers, shapers, sanders and bandsaws.  
4. The location of any obtrusion such as a joist  
or heating duct, that will require special duct  
routing.  
2. Ideally, you should design the duct system to  
have the shortest possible mainline run and  
to have short secondary branch ducts.  
3. Directional changes should be kept to a min-  
imum. The more directional change fittings  
you use, the greater the loss of overall pres-  
sure.  
4''  
4''  
4''  
4''  
Branch Line  
5''  
4''  
6''  
4. Gradual directional changes are more effi-  
cient than sudden directional changes (i.e.  
use the largest corner radius possible when  
changing hose or pipe direction).  
Main Line  
4''  
Dust  
Collector  
4''  
5. Each individual machine should have a blast  
gate to control suction from one machine to  
another.  
Figure 14. Bird’s eye planning view.  
6. The simpler the system, the more efficient  
and less costly it will be.  
-18-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: OPERATIONS  
Once assembly is complete and adjustments are  
done to your satisfaction, you are ready to test run  
the machine.  
Test Run  
Turn on the power supply at the main panel.  
Press the START button. Make sure that your fin-  
ger is poised on the STOP button, just in case  
there is a problem. The dust collector should run  
smoothly, with little or no vibration or rubbing nois-  
es. Strange or unnatural noises should be investi-  
gated and corrected before operating the  
machine further.  
Disconnect power to the  
machine when perform-  
ing any maintenance,  
assembly or adjust-  
ments. Failure to do this  
may result in serious  
personal injury.  
If you cannot easily locate the source of an  
unusual noise or vibration, contact our service  
department for help.  
Keep loose clothing  
rolled up and out of the  
way of machinery and  
keep hair pulled back.  
General  
Operating your Model G1028Z/G1029 is simple  
and straightforward. Blast gates located at each  
of the machines controls the air flow from the  
woodworking machine to the dust collector. If a  
machine is not being used, keep the blast gate  
closed to maintain higher levels of efficiency  
throughout the system.  
Wear safety glasses dur-  
ing the entire operations  
process. Failure to com-  
ply may result in serious  
personal injury.  
Always wear a dust  
mask when operating  
your dust collector. This  
machine circulates saw-  
dust which may cause  
allergic reactions or res-  
piratory problems.  
DO NOT use the dust collector for any other  
purpose besides collecting dust from con-  
nected woodworking machines. A dust col-  
lector should NEVER be used as an air  
cleaner. For safest use, wear a dust mask  
and use an air cleaner in addition to the  
dust collector.  
G1028Z/G1029 Dust Collector  
-19-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: MAINTENANCE  
Lubrication  
Disconnect power to the  
machine when perform-  
ing any maintenance,  
Since all bearings are shielded and permanently  
lubricated, simply leave them alone until they  
need to be replaced. Do not lubricate them.  
assembly or adjust-  
ments. Failure to do this  
may result in serious  
personal injury.  
Keep loose clothing  
rolled up and out of the  
way of machinery and  
keep hair pulled back.  
Bag Cleaning  
Always wear a dust  
mask when changing  
the dust collection bags  
on the dust collector.  
Sawdust may cause  
allergic reactions or res-  
piratory problems.  
Wear safety glasses dur-  
ing the entire mainte-  
nance process. Failure  
to comply may result in  
serious personal injury.  
Always empty the collection bags on a regular  
basis. Emptying the collection bags allows the  
machine to operate at a much higher level of effi-  
ciency.  
General  
Regular periodic maintenance on your Model  
G1028Z/G1029 Dust Collector will ensure its opti-  
mum performance. Make a habit of inspecting  
your machine each time you use it. Check for the  
following conditions and repair or replace when  
necessary:  
Always wear the appropriate respirator or dust  
mask and safety glasses when emptying the col-  
lection bags. Small dust particles can escape the  
bags during emptying, causing them to become  
airborn and easily inhailed. This microscopic air-  
born dust is extremely unhealthy to breathe and  
can cause serious health problems.  
1. Loose mounting bolts.  
2. Worn switch.  
While the Model G1028Z/G1029 excels at collect-  
ing the majority of wood dust produced by your  
machines, it is not an air filter; therfore, we  
strongly recommend the supplemental aid of a  
shop air filter such as the Grizzly G5955 or  
G9956. Air filters are designed to collect the  
smaller dust particles that a dust collector bags  
cannot trap.  
3. Worn or damaged cords and plugs.  
4. Any other condition that could hamper the  
safe operation of this machine.  
5. Do not let collection bags get completely full.  
-20-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 8: CLOSURE  
The following pages contain general machine  
We recommend you keep a copy of our current  
catalog for complete information regarding  
Grizzly's warranty and return policy. If you need  
additional technical information relating to this  
machine, or if you need general assistance or  
replacement parts, please contact the Service  
Department listed in Section 3 Introduction.  
data, parts diagram, parts list and Warranty/Return  
information for your Model G1028Z/G1029 Dust  
Collector.  
If you need parts or help in assembling your  
machine, or if you need operational information,  
we encourage you to call the appropriate regional  
Service Department. Our trained service techni-  
cians will be glad to help you.  
Additional information sources are necessary to  
realize the full potential of this machine. Trade  
journals, woodworking magazines, and your local  
library are good places to start.  
If you have comments dealing specifically with  
this manual, please write to our Bellingham,  
Washington location using the address in the  
Introduction. The specifications, drawings, and  
photographs illustrated in this manual represent  
the Model G1028Z/G1029 as supplied when the  
manual was prepared. However, due to Grizzly’s  
policy of continuous improvement, changes may  
be made at any time with no obligation on the part  
of Grizzly.  
The Model G1028Z/G1029 was specifically  
designed for dust collecting operation. DO  
NOT MODIFY AND/OR USE THIS MACHINE  
FOR ANY OTHER PURPOSE. Modifications  
or improper use of this tool will void the  
warranty. If you are confused about any  
aspect of this machine, DO NOT use it until  
all your questions have been answered.  
Serious personal injury may occur.  
We have included some important safety mea-  
sures that are essential to this machine’s opera-  
tion. While most safety measures are generally  
universal, Grizzly reminds you that each work-  
shop is different and safety rules should be con-  
sidered as they apply to your specific situation.  
Like all power tools, there is danger asso-  
ciated with the Model G1028Z/G1029.  
Accidents are frequently caused by lack of  
familiarity or failure to pay attention. Use  
this tool with respect and caution to lessen  
the possibility of operator injury. If normal  
safety precautions are overlooked or  
ignored, serious personal injury may  
occur.  
Operating this equipment has the potential  
for flying debris to cause eye injury. Always  
wear safety glasses or goggles when oper-  
ating equipment. Everyday glasses or read-  
ing glasses only have impact resistant lens-  
es, they are not safety glasses. Be certain  
the safety glasses you wear meet the appro-  
priate standards of the American National  
Standards Institute (ANSI).  
G1028Z/G1029 Dust Collector  
-21-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WIRE DIAGRAM  
110 VOLT  
MOTOR WIRES  
BLACK  
WHITE  
YELLOW  
RED  
NOTE: THE WIRES FROM THE  
POWER SUPPLY, BESIDES THE  
GREEN GROUND WIRE, ARE  
INTERCHANGEABLE, THEREFORE  
COLORS ARE NOT SPECIFIED.  
GREEN (GROUND)  
TO 110 VOLT  
POWER SUPPLY  
220VOLT  
MOTOR WIRES  
YELLOW  
BLACK  
RED  
WHITE  
GREEN (GROUND)  
TO 220 VOLT  
POWER SUPPLY  
6A  
-22-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MACHINE DATA  
SHEET  
Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901  
GRIZZLY MODEL G1028Z/G1029 DUST COLLECTOR  
Design Type:........................................................................................Single Stage - Upright on Casters  
Overall Dimensions:  
Base............................................................................................................................2114" x 3312  
"
Height ........................................................................................................................................78"  
Intake Hole Size, G1028Z............................................................................................................6"  
Intake Hole Size, G1029..............................................................................................................6"  
Intake Hole Size W/ Adapter ......................................................................................4" x 2 Holes  
Bag Size (Each)................................................................................................................19" x 33"  
Bag Capacity (Each) ..........................................................................................................5 cu. ft.  
Bag Material ..........................................................................................................................Fabric  
Shipping Weight, G1028Z ..................................................................................................116 lbs.  
Shipping Weight, G1029 ....................................................................................................140 lbs.  
Impeller Size, G1028Z ..............................................................................................................11"  
Impeller Size, G1029..................................................................................................................12"  
Air Suction Capacity, G1028Z ....................................................................................1400 C.F.M.  
Air Suction Capacity, G1029 ......................................................................................1600 C.F.M.  
Static Pressure (Inches of Water), G1028Z ................................................................................9"  
Static Pressure (Inches of Water), G1029 ................................................................................11"  
Construction:  
Base......................................................................................Fabricated Sheet Metal with Casters  
Impeller Type ........................................................................................................................Radial  
Impeller Blade Thickness............................................................................332" Steel - Riveted On  
Electrical:  
Type....................................................................................TEFC Capacitor Start Induction Motor  
Horsepower, G1028Z ........................................................................................................112 H.P.  
Horsepower, G1029 ..............................................................................................................2 H.P.  
Phase/Cycle................................................................................................................Single/60 HZ  
Voltage, G1028Z..............................................................................................................110/220V  
Voltage, G1029 ......................................................................................................................220V  
Amps, G1028Z ........................................................................................................................18/9  
Amps, G1029 ..............................................................................................................................12  
R.P.M ......................................................................................................................................3450  
Bearings........................................................................Sealed & Lubricated-for-Life, Ball Bearing  
Specifications, while deemed accurate, are not guaranteed.  
G1028Z/G1029 Dust Collector  
-23-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
27  
35  
14  
20  
23  
24  
2
21  
14  
38  
20  
2
30  
17  
19  
28  
23  
15  
12  
25  
22  
11  
2
16  
31  
10  
8
9
6A (G1029)  
6 (G1028Z)  
2
12  
18  
34  
5
7
29B  
4
29A  
G1028Z/G1029 Dust Collector  
2
1
-24-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REF  
1
2
PART #  
DESCRIPTION  
P1028001 CASTER  
PFB01  
FLANGE BOLT 516"-18 x 12  
"
4
5
P1028004 BASE PLATE  
PS06  
PHLP HD SCR 10-24 X 38  
"
6
P1028Z006 INLET COVER (G1028Z)  
6A P1029006A INLET COVER (G1029)  
7
8
9
P1028007 CAP SCREW  
PB09  
P1028009 SPECIAL WASHER  
HEX BOLT 516"-18 x 12  
"
10 P1028010 10'' IMPELLER (G1028Z)  
10 P1029010 10'' IMPELLER (G1029)  
11 P1028011 COLLECTOR BODY  
12 PW07  
14 PFB01  
15 PB03  
16 PSW04  
FLAT WASHER 516"  
FLANGE BOLT 516"-18 x 12  
HEX BOLT 516"-18 x 1"  
SWITCH  
"
17 P1028Z017 MOTOR, 112 H.P. (G1028Z)  
17 P1029017 MOTOR, 2 H.P. (G1029)  
18 PN02  
HEX NUT 516"-18  
19 P1028019 OUTLET  
20 P1028020 HOSE CLAMP  
21 P1028021 HOSE  
22 G1027  
BAG, LOWER  
23 P1028023 COLLECTOR SUPPORT  
24 P1028024 COLLECTOR  
25 P1028025 PACKING (G1028Z)  
25 P1029025 PACKING (G1029)  
26 P1028026 UPPER BAG SUPPORT  
27 G1027  
BAG, UPPER  
28 P1028028 GASKET  
29B P1029029B Y-INLET 6" X 4" X 4"  
29A P1029029A INLET CAP 6"  
30 PK32M  
30 PK28M  
KEY 6 x 6 x 28 (G1028Z)  
KEY 7 x 7 x 29 (G1029)  
31 PWRCRD220S POWER CORD  
34 PWRCRD220L MOTOR CORD  
35 P1028035 FILTER CLAMP  
38 P1028Z038 QUICK RELEASE CLAMP  
G1028Z/G1029 Dust Collector  
-25-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY AND RETURNS  
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from  
the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,  
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty  
and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-  
ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent  
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants.  
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and  
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.  
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, spe-  
cial, or consequential damages arising from the use of our products.  
To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then  
issue you a “Return Number,” which must be clearly posted on the outside as well as the inside of the car-  
ton. We will not accept any item back without this number. Proof of purchase must accompany the mer-  
chandise.  
The manufacturers reserve the right to change specifications at any time because they constantly strive to  
achieve better quality equipment. We make every effort to ensure that our products meet high quality and  
durability standards and we hope you never need to use this warranty.  
Please feel free to write or call us if you have any questions about the machine or the manual.  
Thank you again for your business and continued support. We hope to serve you again soon.  
-26-  
G1028Z/G1029 Dust Collector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY CARD  
Name ____________________________________________________________________________________  
Street ____________________________________________________________________________________  
City ______________________________________________________________State________Zip_________  
Phone Number_______________________E-Mail_______________________FAX________________________  
MODEL # _____________________SERIAL #______________________Order #_________________________  
The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services. Of  
course, all information is strictly confidential.  
1.  
How did you learn about us?  
___Advertisement  
___Catalog  
___Friend  
___Card Deck  
10.  
Which benchtop tools do you own? Check all that apply.  
___World Wide Web  
___1" x 42" Belt Sander  
___5" - 8" Drill Press  
___8" Table Saw  
___8" - 10" Bandsaw  
___Disc/Belt Sander  
___Mini Jointer  
___6" - 8" Grinder  
___Mini Lathe  
___10" - 12" Thickness Planer  
___Scroll Saw  
___Spindle/Belt Sander  
___Other__________________________________________________  
Which of the following magazines do you subscribe to.  
2.  
___American Woodworker  
___Cabinetmaker  
___Practical Homeowner  
___Shop Notes  
___Today’s Homeowner  
___WOOD  
___Wooden Boat  
___Woodshop News  
___Woodsmith  
___Woodwork  
___Woodworker  
___Woodworker’s Journal  
___Workbench  
___Other__________________________________________________  
How many of the machines checked above are Grizzly? ____________  
___Family Handyman  
___Fine Homebuilding  
___Fine Woodworking  
___Home Handyman  
___Journal of Light Construction  
___Old House Journal  
___Popular Mechanics  
___Popular Science  
11.  
12.  
Which portable/hand held power tools do you own? Check all that apply.  
___Belt Sander  
___Biscuit Joiner  
___Circular Saw  
___Detail Sander  
___Drill/Driver  
___Orbital Sander  
___Palm Sander  
___Portable Planer  
___Saber Saw  
___Reciprocating Saw  
___Router  
___Popular Woodworking  
___Other__________________________________________________  
Which of the following woodworking/remodeling shows do you watch?  
___Miter Saw  
3.  
___Other__________________________________________________  
What machines/supplies would you like Grizzly Industrial to carry?  
___Backyard America  
___Home Time  
___The New Yankee Workshop  
___This Old House  
13.  
___The American Woodworker  
___Woodwright’s Shop  
__________________________________________________________  
__________________________________________________________  
What new accessories would you like Grizzly Industrial to carry?  
__________________________________________________________  
__________________________________________________________  
What other companies do you purchase your tools and supplies from?  
__________________________________________________________  
__________________________________________________________  
Do you think your purchase represents good value?  
___Other__________________________________________________  
What is your annual household income?  
4.  
5.  
14.  
15.  
___$20,000-$29,999  
___$30,000-$39,999  
___$40,000-$49,999  
___$50,000-$59,999  
___$60,000-$69,999  
___$70,000-$79,999  
___$80,000-$89,999  
___$90,000 +  
What is your age group?  
___20-29  
___30-39  
___40-49  
___50-59  
___60-69  
___70 +  
16.  
17.  
18.  
6.  
7.  
8.  
How long have you been a woodworker?  
___Yes  
Would you recommend Grizzly Industrial to a friend?  
___Yes ___No  
___No  
___0 - 2 Years  
___2 - 8 Years  
___8 - 20 Years  
___20+ Years  
How would you rank your woodworking skills?  
Would you allow us to use your name as a reference for Grizzly customers  
in your area? Note: We never use names more than three times.  
___Simple  
___Intermediate  
___Advanced  
___Master Craftsman  
___Yes  
___No  
What stationary woodworking tools do you own? Check all that apply.  
19.  
Comments:_________________________________________________  
__________________________________________________________  
__________________________________________________________  
__________________________________________________________  
__________________________________________________________  
___Air Compressor  
___Band Saw  
___Drill Press  
___Drum Sander  
___Dust Collector  
___Horizontal Boring Machine  
___Jointer  
___Panel Saw  
___Planer  
___Power Feeder  
___Radial Arm Saw  
___Shaper  
___Spindle Sander  
___Table Saw  
___Lathe  
___Mortiser  
___Vacuum Veneer Press  
___Wide Belt Sander  
___Other__________________________________________________  
How many of your woodworking machines are Grizzly? _____________  
9.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOLD ALONG DOTTED LINE  
Place  
Stamp  
Here  
GRIZZLY INDUSTRIAL, INC.  
P.O. BOX 2069  
BELLINGHAM, WA 98227-2069  
FOLD ALONG DOTTED LINE  
Send a Grizzly Catalog to a friend:  
Name_______________________________  
Street_______________________________  
City______________State______Zip______  
TAPE ALONG EDGES--PLEASE DO NOT STAPLE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Harbor Freight Tools Pasta Maker 4832 User Manual
Harbor Freight Tools Work Light 66308 User Manual
Hasbro Games Spiderman Monopoly User Manual
Honeywell Barcode Reader 7820 User Manual
Honeywell Clock PCR11ELW User Manual
HP Hewlett Packard Digital Camera photosmart 720 User Manual
Humminbird Fish Finder 400TX User Manual
Hunter Fan Universal Remote ICR User Manual
Husqvarna Trimmer 536 LIL User Manual
IBM Printer WS525 User Manual