User Guide
Cisco Unified CallManager Express
User Guide for Cisco Unified IP Phones 7905/ 7912, 7906/ 7911,
7940/ 7960, 7941/ 7961 (SCCP)
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Description
Hold button
Places an active call on hold. Resumes a held call.
6
Keypad
Functions like a traditional telephone keypad.
7
8
Volume button
Increases or decreases handset volume and on-hook ring volume.
Handset with indicator light
Functions like a traditional handset.
9
Connecting Your Phone
This section shows how to use the connectors on your Cisco IP phone.
3
2
5
1
4
Network port (10BASE-T)
Handset port
Cisco power supply (optional)
1
2
3
4
5
Power cable with wall socket plug
DC adapter port (DC48V)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Handset Rest
When you connect your phone, you can adjust the handset rest so that the receiver will not slip out of the cradle. Use the
following method to adjust the handset:
1. Set the handset aside and pull the square plastic tab from the handset rest.
2. Rotate the tab 180 degrees.
3. Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the
handset rest.
1
2
3
Cisco Unified IP Phone 7960G, 7940G, 7961G, and 7941G
The Cisco Unified IP phones 7940/7960 and 7941/7961 are multiline phones. The 7940 and 7941 have two lines; the 7960 and
7961 have 4 lines. The 7941/7961 phone provides a higher resolution display than the 7940/7960 phones, and are similar in
operation.
Physical Layout
2
1
3
17
4
5
6
8
7
16 15
14 13 12 11
10 9
Name
Description
Cisco IP phone model type
LCD screen
Shows the Cisco IP phone model number.
1
2
Displays information such as line/call status, phone number, and soft key tabs.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Description
Line or speed-dial button
Opens a new line, speed-dials a phone number, or ends a call. The Cisco Unified IP
Phone 7940G has two lines, and the Cisco Unified IP Phone 7960G has six lines.
3
Footstand adjustment
Directories button
Allows you to adjust the angle of the phone base.
Provides access to phone directories.
4
5
Question “?” button
Not in use.
6
7
Settings button
Provides access to phone settings such as display contrast and ring type.
Speaker button
Mute button
Toggles the speaker on and off.
Toggles mute on and off.
8
9
Headset button
Volume button
Toggles the headset on and off.
10
11
Increases or decreases handset, headset, ringer, or speakerphone volume.
Services button
Provides access to phone services.
12
13
14
Messages button
Navigation button
Provides access to a message system.
Scrolls through text and selects features that are displayed on the LCD screen.
Keypad
Functions like a traditional telephone keypad.
15
16
17
Soft keys buttons
Handset with indicator light
Engages the functions displayed on the corresponding LCD tabs.
Functions like a traditional handset and provides message waiting indicator light and
message-waiting (stutter) tone.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Phone
This section show how to use the connectors on your Cisco IP phone.
8
1
AUX
10/100 SW 10/100 PC
+
DC48V
7
2
6
3
5
4
1
5
DC adapter port (DC48V) for phones not
provided with inline power
Access port (10/100 PC) for connecting
your phone to your computer
2
3
4
6
7
8
AC-to-DC power supply
AC power cord
Handset port
Headset port
Network port (10/100 SW) for connecting to the
network
Footstand button
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Handset Rest
When you connect your phone, you can adjust the handset rest so that the receiver will not slip out of the cradle. Use the
following method to adjust the handset:
1. Set the handset aside and pull the square plastic tab from the handset rest.
2. Rotate the tab 180 degrees.
3. Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the
handset rest.
1
2
3
Soft Key Descriptions
Your Cisco Unified IP phone is equipped with soft keys for call features and options. soft keys are displayed along the bottom
of the LCD screen and are engaged using the corresponding buttons. Soft keys can change according to the state of the phone.
Following is a comprehensive list of soft keys offered on these Cisco Unified IP Phones. Functions depend on your system
configuration.
Soft Key
<< or >>
Accept
Acct
Description
Navigates to edit characters. Use the backspace soft key to erase digits that were entered incorrectly.
Accepts the current edits. For instance, adding an entry to your personal directory.
Consult your administrator on the use of this soft key.
Adds an entry to the personal directory.
Add
Alpha
Toggles character input mode from numeric to alphanumeric.
Answers an incoming call.
Answer
BlndXfr
Callback
Cancel
CFwdALL
Clear
Redirects the call without allowing you to speak to the transfer recipient (known as a blind transfer).
Notifies callers that the called line is free.
Cancels the last selection.
Forwards all calls.
Clears directory history.
Confrn
DelAll
Delete
Dial
Connects callers to a conference call.
Deletes all entries in the personal directory.
Deletes selected item.
Dials the displayed number.
Directories
DND
Provides access to phone directories.
Enables and disables the Do-Not-Disturb feature.
Decreases the LCD screen contrast.
Down
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Soft Key
Edit
Description (continued)
Selects a number and activates the cursor for editing.
Selects a number and activates the cursor for editing.
Ends the current call.
EditDial
EndCall
Exit
Exits from the current selection or screen.
Flash
Provides hookflash functionality for three-way calling and call waiting services provided by the PSTN or
Centrex service.
GPickUp
Hold
Selectively picks up calls to a phone number that is a member of a pickup group.
Places an active call on hold. Resumes a held call.
Login
Provides PIN-controlled access to restricted phone features. Contact your system administrator for additional
instructions.
Message
Monitor
Monoff
more
Dials the local voice-mail system.
Enables the user to switch from the handset to the speaker to listen to a call hands-free.
Enables the user to switch from the speaker to the handset and continue talking on the call.
Scrolls through additional soft key options (for example, use the more soft key to locate the Number soft
key).
Mute
Toggles muting on and off.
NewCall
Number
Ok
Opens a new line on the speakerphone to place a call.
Toggles character input mode from alphanumeric to numeric.
Confirms the selection.
Park
Forwards calls to a location from which the call can be retrieved by anyone in the system.
Selectively picks up calls to another extension.
Plays the ring sound sample.
PickUp
Play
Redial
Reorder
Restore
Resume
Save
Redials the last number dialed.
Reorder the entries in the Personal Directory.
Consult your system administrator on the use of this soft key.
Returns to an active call.
Saves the last change.
Search
Select
Settings
Trnsfer
Up
Initiates a search in the local directory.
Selects the highlighted option.
Provides access to phone settings such as display contrast, ring volume, and ring type.
Transfers selected calls to an alternate number.
Increases the LCD screen contrast.
URL
Enter alphanumeric characters for call forwarding.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Operating Your Phone
This section describes how to operate your Cisco Unified IP phone. Because there are differences in phone and site configuration,
not all features and procedures described here may apply to your phone. Consult your system administrator for more
information. This section includes:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Note
In the following procedures, you may be required to enter information using the keypad. Press the backspace (<<) soft
key to erase digits that were entered incorrectly.
Basic: Place a Call
To place a call, use one of the following methods:
•
•
•
•
•
•
•
Lift the handset and dial the number.
Dial the number and then lift the handset.
Press the line button for your extension, dial the number, and then lift the handset.
Press any available button, dial the number, and then lift the handset.
Press the New Call soft key, dial the number, and then lift the handset.
Press a speed-dial button and then lift the handset.
If you have selected a number from a directory, press the Dial soft key, and then lift the handset.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Speakerphone: Place a Call
To place a call using the speakerphone, use one of the following methods:
•
•
Press the speakerphone button and perform the steps for placing a basic call, and do not lift the handset.
Perform the steps for placing a basic call and do not lift the handset.
To switch to handset operation, just lift the handset.
Headset: Place a Call
To place a call using a headset, press the heasdset button, then perform the steps for placing a basic call, and do not lift the
handset.
To switch to handset operation, just lift the handset.
Answer a Call
To answer a call, use one of the following methods:
•
•
•
Lift the handset.
If you are using a headset, press the Headset button. If necessary, press the line button to select between incoming calls.
To use the speakerphone, press the Answer soft key or the Speaker button.
End a Call
To end a call, use one of the following methods:
•
•
•
Hang up the handset.
If you are using a headset, press the Headset button or the EndCall soft key.
If you are using the speakerphone, press the Speaker button or the EndCall soft key.
Redial a Number
To redial the most recently dialed number, use one of the following methods:
•
•
Lift the handset and press the Redial soft key.
Press the Redial soft key to dial using the speakerphone.
Hold a Call
To place a call on hold while on the call, press the Hold soft key.
To retrieve a held call, press the Resume soft key.
If multiple calls are on hold, use the Navigation button to select the desired call before you press Resume.
If multiple calls on multiple lines are on hold, press the line button for the line that you want to pick up. The active call on the
other line is automatically put on hold.
Note
Because the hold feature can generate music or beeps, avoid using hold when dialed into a remote conference system.
Simple three-party conferences that are created locally on your phone can safely be placed on hold without introducing
music or beeps into the conference.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute a Call
To mute a call, press the Mute button. The Mute button lights, indicating that the other party cannot hear you.
To deactivate the mute function, use one of the following methods:
•
•
Press the Mute button again.
Lift the handset if you are using mute with the speakerphone.
Note
The Mute feature does not generate music or beeps.
Manage Call Waiting
If you are on a call when a second call comes in, you hear a call-waiting tone or see a flashing indicator light on the handset
rest, depending on the configuration of your phone.
To answer the new call on the same line, use the following method:
1. Use the Navigation button to select the call.
2. Press the Answer soft key to answer the call. The call on the other line is automatically put on hold.
To return to the original call, use the following method:
1. Use the Navigation button to reselect the call.
2. Press the Resume soft key to reconnect to the call.
For calls on a separate line, press the Line button for the incoming call. The call on the other line is automatically put on hold.
To return to the original call, press the Line button associated with the original call.
Retrieve Voice-Mail Messages
To access voice messages, use the following method:
1. Select an available Cisco Unified IP phone line by lifting the handset, by pressing the speakerphone button, or by pressing
a line button. Listen for the dial tone.
2. Press the Messages button, and follow the voice instructions.
Note
When you have one or more new messages, if you have the message-waiting indicator (MWI) configured, the light on
your handset is lit.
Call-Blocking (Toll Bar) Override
Call blocking prevents unauthorized use of phones. It is implemented by matching a pattern of specified digits during a specified
time and day of week or date. The call-blocking override feature allows individual phone users to override the call blocking that
has been defined.
To place calls when call-blocking is enabled, use the following method:
1. Press the Login soft key on the Cisco IP phone.
2. Enter the PIN that is associated with the phone.
Note
Contact your system administrator for your personal identification number (PIN).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer a Call
To transfer a selected call to another number, use one of the following methods:
•
Blind transfer—Immediately redirects the call without allowing you to speak to the transfer recipient (the person to whom
you are transferring the call).
•
Consult transfer—Redirects the call after first allowing you to speak to the transfer recipient.
To transfer a call, use the following method:
1. During a call, press the Trnsfer soft key. The call is placed on hold.
2. Dial the number to which you want to transfer the call.
3. To make a blind transfer:
–
Hang up the handset or press the BlndXfr soft key after you hear line ringing.
4. To make a consult transfer:
–
–
Wait for the call to be answered. Speak to the transfer recipient. Then press the Trnsfer button or hang up the handset.
If the transfer fails, press the Resume soft key to return to the original call.
5. To cancel your consult call-transfer attempt:
Press the EndCall soft key.
6. To reconnect to the original caller:
Press the Resume soft key.
–
–
Forward All Calls
To forward all incoming calls to another number, use the following method:
1. Press the CFwdALL soft key.
2. Dial the number to which you want to forward all your calls. Dial the number exactly as you would if you were placing a
call to that number. Remember to include locally required prefix numbers. The phone display is updated to show that calls
are to be forwarded.
3. Press the Accept soft key.
Note
To forward calls to voice mail, manually enter the voice-mail number, or use the soft key and button sequence of
CFwdALL soft key plus the Messages button, followed by the EndCall soft key.
To forward calls to a speed-dial number, use the soft key and button sequence of the CFwdALL soft key plus a
speed-dial button, followed by the EndCall soft key.
4. To cancel call forwarding, press the Cancel soft key.
Conference Calls
Your Cisco Unified IP Phone provides three types of conference calls: Standard, Meet-Me, and Ad Hoc conference calls.
S t a n d a rd Co n fe re n c e Ca lls
A standard conference call involves three parties.
You can create a standard conference in different ways, depending on your needs and the soft keys available on your phone:
•
Confrn—Use this soft key to establish a standard conference by calling each participant. Standard conference calling is a
default feature available on most phones.
•
Join—Use this soft key to establish a standard conference by joining several calls already on one line.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
•
cBarge—Use this soft key to add yourself to an existing call on a shared line and to turn the call into a standard conference
call. This feature is available only on phones that use shared lines.
Place a Conference Call
To place a three-party conference call, use the following method:
1. During a call, press the more soft key and then the Confrn soft key to open a new line and put the first party on hold.
2. Place a call to another number.
3. When the call connects, press the Confrn soft key again to add the new party to the existing call with the first party.
To establish a conference call between two callers to a Cisco Unified IP phone, one active and the other on hold, press the Confrn
soft key.
To establish a conference call between two callers already present on a Cisco Unified IP phone, using separate line buttons, one
active and the other on hold, use the following method:
1. Press the Confrn soft key.
2. Press the Line button of the call you want to add to the three-party conference.
End a Conference Call
To end the conference call, use one of the following methods:
•
•
Hang up the handset.
Press the EndCall soft key.
Alternate Methods to End a Conference Call
Call initiators may use one of the following methods (functions vary according to your system configuration):
•
To end the conference and remain connected to the most recent call, press the Confrn soft key. The older call is placed on
hold.
•
To disconnect from the conference, hang up the handset. The other parties remain on the conference call.
Place a Call from Your Local Directory
To access the local phone directory established by the system administrator, use the following method:
1. Press the Directories button.
2. Press the Navigation Up or Down button or press 4 to select the Local Directory.
3. Press the Navigation Up or Down button to select the Last, First, or Number field search option.
4. Using the keypad, enter the last name or first name for the entry.
When entering letters, select the appropriate number key of the letter you want, and press that key a number of times that
equals the position of the target letter. For example, to enter a B, press the 2 key two times, and to enter a C, press the 2
key three times. Use the backspace (<<) soft key to make corrections while entering data.
5. Press the Search soft key to find your selection.
6. If your search results in multiple listings, use the Navigation Up or Down button to select the correct number.
7. Press the Dial soft key to dial the selected number.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Personal Speed-Dial Buttons
After an administrator has defined one or more speed-dial instances for a Cisco Unified IP phone, you can reprogram numbers
that are not locked or program numbers into an instance that has an empty dial string.
To program personal speed-dial buttons, use the following method:
1. Select an available phone line by lifting the handset, by pressing the NewCall soft key, or by pressing a line button. Listen
for the dial tone.
2. Press the pound key (#).
3. Press the speed-dial button that you want to program. A short beep confirms that you are starting to program this button.
4. Enter the speed-dial number. The digits appear on the phone display. When you are entering speed-dial numbers, use the
backspace (<<) soft key to erase digits that were entered incorrectly.
To remove a speed-dial number without replacing it with a new one, press the pound key (#).
5. Press the same speed-dial button a second time to indicate that you have finished entering the speed-dial digits and to store
the new speed-dial number.
6. Hang up the handset, or press a new speed-dial button and repeat the process.
Place a Call from Your System Speed-Dial Directory
To place a call from your system speed-dial directory, use the following method:
1. Select an available IP phone line (off hook or NewCall) and get a dial tone.
2. Press the Directories button, or use the Navigation button to locate Directory and then press the Select soft key.
3. Use the Navigation button to scroll through the options. Use the Select soft key to select speed-dial options.
–
–
Press 5 for the Local Speed Dial.
Press 6 for the Personal Speed Dial. (Functions vary depending on your system configuration.)
4. Use the Navigation button to scroll through the speed-dial phone list.
5. To dial the selected phone number, press the Select soft key, or enter the entry number on the keypad.
6. Press the Exit soft key to return to the previous directory menu.
View Call History
To view recent missed, received, or placed calls, use the following method:
1. Press the Directories button.
2. Use the Navigation button to scroll and select the desired call list.
3. Use one of the methods below to choose a call list:
–
–
–
–
Press the Select soft key.
Press 1 on the keypad for Missed Calls.
Press 2 on the keypad for Received Calls.
Press 3 on the keypad for Placed Calls.
4. Press the Exit soft key to return to the previous directory menu.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Place a Call from Call History
To place a call to a number in the call history list, use the following method:
1. Use the Navigation button to scroll through the call history list.
2. Use the Select soft key to select a phone number. The digits appear on the phone display.
3. To dial the number as it appears on the phone display:
–
Press the Dial soft key.
To edit the number on the phone display before dialing, use the following method:
1. Press the Edit soft key to place the cursor at the beginning of the number on the phone display.
2. Use the keypad to edit the digits as needed. Use the backspace (<<) soft key to erase incorrectly entered digits.
3. Press the Dial soft key to place the call.
Clear Call History
To clear all numbers in the directory histories, press the Clear soft key.
Note
The Clear soft key clears all call history lists. Selective clearing of call history lists is not supported.
Use Audio Paging
Audio paging provides a one-way voice path to the phones that have been designated to receive paging. It does not have a
press-to-answer option like the intercom feature.
To use the paging function for paging a group, use the following method:
1. Select an available phone line by lifting the handset. Listen for the dial tone.
2. Dial the designated paging group number.
Each idle IP phone that has been configured with the paging number answers automatically in speakerphone mode, and the
phone displays the caller ID.
3. When you finish speaking your message and hang up, the phones are returned to their idle states.
Use the Intercom Feature
Cisco Unified CallManager Express supports intercom functionality for one-way and press-to-answer voice connections using
a dedicated pair of intercoms on two phones that speed-dial each other.
To use the intercom feature, use the following method:
1. Press the Menu button.
2. Use the Navigation button to select Directories.
3. Use the Navigation button to select Speed Dial.
4. Select intercom Speed Dial.
The called IP phone automatically answers the call in speakerphone mode with mute activated. A beep alerts the recipient
to the incoming call.
To respond to an intercom call, press the Mute button, or lift the handset.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Activate Do Not Disturb
For visual call alerting and information without audible ringing, use Do Not Disturb (DND). Calls receive normal
call-forward-busy and no-answer treatment.
To activate DND, use the following method:
1. Press the more soft key to locate the DND soft key.
2. Press the DND soft key. A display text message indicates that the phone is in Do-Not-Disturb mode.
Note
Pressing the DND soft key immediately forwards the call to the call-forward destination set on the phone. If the
call-forward destination is not set, pressing the DND soft key disables the ringer.
To deactivate the Do-Not-Disturb feature, repeat Steps 1 and 2.
Setting and Adjusting Your Cisco Unified IP Phone
Adjust the Volum e for the Current Call
To adjust the handset, speakerphone, or headset volume for the current call, use the following method:
1. During a call, press the Up or Down Volume button.
2. Press the Save soft key to apply the new volume level to future calls.
Adjust the Ring Volum e
To adjust the ring volume, press the Up or Down Volume button while the handset is in its cradle.
Select the Ring Type
To change the ring type, use the following method:
1. Press the Settings button.
2. Press 2 for Ring Type, or use the Navigation button to select Ring Type and press the Select soft key.
3. Use the Navigation button to select the ring type. Press the Play soft key to hear samples.
4. Highlight the ring you want, and then press the Select soft key.
5. Use one of the following options:
•
•
•
Press the Ok soft key to select your setting, which returns you to the previous menu,
Press Cancel to exit to the previous menu without changing the setting.
Press the Back soft key to return to the main phone screen.
Adjust the Display Contrast
To adjust the contrast in your LCD Display, use the following method:
1. Press the Settings button.
2. Press 1 for Contrast, or use the Select soft key.
3. Use the Down or Up soft key to change the contrast.
4. Use one of the following options:
•
•
•
Press the Ok soft key to select your contrast setting, which returns you to the main directory,
Press Cancel to exit to the previous menu without changing the setting.
Press the Back soft key to return to the main phone screen.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Phone Features and Functions List
The following list is an alphabetical list of features and functions for your IP phone.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
European Headquarters
Cisco Systems International BV
Haarlerbergpark
Haarlerbergweg 13-19
1101 CH Amsterdam
The Netherlands
www-europe.cisco.com
Tel: 31 0 20 357 1000
Fax: 31 0 20 357 1100
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Asia Pacific Headquarters
Cisco Systems, Inc.
168 Robinson Road
#28-01 Capital Tower
Singapore 068912
www.cisco.com
www.cisco.com
www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Tel: 408 526-7660
Fax: 408 527-0883
Tel: +65 6317 7777
Fax: +65 6317 7799
Cisco Systems has more than 200 offices in the following countries. Addresses, phone numbers, and fax numbers are listed on the
Ci s c o We b s i t e a t w w w . c i s c o . c o m/ g o / o ffi c e s
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica • Croatia • Cyprus • Czech Republic • Denmark
Dubai, UAE • Finland • France • Germany • Greece • Hong Kong SAR • Hungary • India • Indonesia • Ireland • Israel • Italy • Japan • Korea • Luxembourg • Malaysia
Mexico • The Netherlands • New Zealand • Norway • Peru • Philippines • Poland • Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore
Slovakia • Slovenia • South Africa • Spain • Sweden • Switzerland • Taiwan • Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam
Zimbabwe
CCVP, the Cisco Logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar,
Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo,
Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo,
iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StackWise,
The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
(0612R)
Printed in the USA on recycled paper containing 10% postconsumer waste.
78-xxxxx-xx
DOC-78xxxxx=
Download from Www.Somanuals.com. All Manuals Search And Download.
|
