Practical
Guide to the
edirol r-09hr
Amazing 24 bit/96 kHz super sound quality!
Ultra-lightweight recorder. Fits in your pocket!
Functional! Fun! Record anywhere!
Detailed explanation of practical techniques.
Practical
Guide to the
edirol r-09hr
Chapter 1 : The outstanding features of the R-09HR
The outstanding features of the R-09HR. ....................................................... p. 4
Chapter 2 : Situation practical use technique
Situation 1 : Recording acoustic instruments ............................................... p. 6
Situation 2 : Recording band performances.................................................. p. 8
Situation 3 : Recording from cassettes or MD............................................... p. 10
Situation 4 : Recording vocals............................................................................. p. 12
Situation 5 : Recording outdoors....................................................................... p. 14
Situation 6 : Recording meetings ...................................................................... p. 16
Chapter 3 : Applied technique
Application 1 : Techniques for recording specific instruments............... p. 18
Application 2 : Save to a PC!!............................................................................... p. 20
Application 3 : Deleting unnecessary data on a PC.................................... p. 21
Application 4 : Creating CDs on a PC ............................................................... p. 22
Application 5 : Techniques for applying file names.................................... p. 23
Chapter 4 : Appendix
Options for recording on the R-09HR .............................................................. p. 24
Examples of connecting accessories to the R-09HR................................... p. 26
Specifications............................................................................................................ p. 27
ꢀ
Compact, with high sound quality.
Unbelievable high quality
The R-09HR’s 24 bit/96 kHz quality is suitable
for professional recording studios and sur-
passes the 16 bit/44.1 kHz standard for CDs.
You can capture the dynamics and details of
recorded sound.
No searching!! Start recording immediately by
pressing a button!! Immediately playback!!
Unlike tapes, you don’t need to sear
the beginning of a recording. And
can check the recording on-site wi
internal monitor speaker!!
Ultra-light. Take it anywhere, anytime.
A heavy recorder is just another burden when
you’re carrying a lot of luggage. The ultra-light,
compact R-09HR fits in your pocket or a corner
of your bag.
Reduce operation noise with the remote control!!
You can adjust recording levels or start
playback using the remote control.
You can also eliminate worry about record-
ing noise from button operations by using
the remote control even when recording
nearby.
4
The outstanding features of the R-09HR.
No mechanical noise. Convenient built-in mic.
The R-09HR uses an SD card as its recording
media. Recording doesn’t involve moving
parts, so you don’t have to worry about
recording the mechanical noises associated
with tape- and disc-based recorders.
The built-in stereo mic is both practical and
powerful.
Includes “pyro Audio Creator LE” from Cakewalk!!
Includes “pyro Audio Creator LE”software for
waveform editing. You can freely edit recorded
sounds on a PC and create CDs!
High-visibility OLED display.
The R-09HR supports a wide-angle
view, energy-efficient OLED (Organic
Light-Emitting Diode) display that can
be used outdoors or onstage. The level
meters respond quickly, and the display
has a separate peak indicator. These
features allow you to precisely set your
recording level.
Note: The actual specifications, appearance, or display screen of the product may be subject to change without notice.
5
Situation
Recording acoustic instruments
1
Point
Point
Setting
the recording level
Positioning
the R-09HR
1
2
First, set the recording volume. Play a phrase
that has the highest volume, and then adjust the
recording level so that the R-09HR level meter
reaches the highest level without the PEAK
indicator, shown in red below, turning on.
The left and right microphones on the R-09HR
record sound that the left and right ear, respec-
tively, would hear. So, aim the R-09HR to directly
at what you want to record.
Also, moving closer to the sound source creates
a more distinct recording, while moving further
away softens the sound by recording the ambi-
ent sound of the room.
When the PEAK
indicator turns on,
the input volume is
too high.
Aim directly
at the sound
source.
If the level is set too low, fidelity is lost. If the
sound level is set too high, pops and snaps may
be produced.
See p. 45 in the Owner’s Manual for setting the
recording level.
☞
See “Techniques for recording specific instru-
☞
ments” on p. 18 in this guide for recording
different instruments.
6
Practical
Guide to the
edirol r-09hr
Point
Setting
sound quality
3
We recommend recording instruments in WAV format. However, because MP3 recordings are compact
in file size, they can be useful for recording instrument practice.
Record Mode
WAV
Description
Get professional recording quality for digital audio by recording in 24 bit/96 kHz.
Recording in 16 bit/44.1 kHz allows you to transfer data to the PC and burn a CD
without any conversion.
The MP3 data format was created to preserve the quality of WAV data while
compressing the file size. Until now, you had to convert WAV file to an MP3 on a
PC, but the R-09HR allows you to record in MP3 format directly. Not only can you
transfer data to a PC and distribute it directly on the internet, you can also record
hours of practice, taking advantage of the smaller file size.
MP3
See p. 38-39 in the Owner’s Manual for setting the recording mode.
☞
Music Format Examples
Application
Recording Mode
Description
Capacity
Professional recording
quality
5 minutes
about
WAV
24 bit/96 kHz
1. Pro Quality
200 MB
Creating CDs on the PC
5 minutes
about
WAV
16 bit/44.1 kHz
2. CD Quality
50 MB
Internet distribution
of music
5 minutes
about
5 MB
3. Internet music distri-
bution quality
MP3
128 kbps/44.1 kHz
7
Situation
Recording band performances
2
Point
Point
What is a
good level?
Placing
the R-09HR
1
2
Bands are louder than normal everyday sounds.
Set the mic gain in the back of the R-09HR to
LOW.
When instruments are placed in various locations
in a room, like a rehearsal studio, you should
position the R-09HR in the middle of the studio
to record the sound of each instrument equally.
The microphone should be placed at about
table height.
Set LIMITER/AGC to ON
If the mic is placed on the floor, the sound is
muffled and unclear; if it is placed too high, you
lose the bass range and the sound becomes tinny.
Drums
Place
in the middle
Set to HIGH for quieter sounds
Set to LOW for louder sounds
Bass Amp
Guitar Amp
Also, you should turn on the limiter. The limiter is
a feature that suppresses noise by lowering the
volume level when the sound input is too high.
PA Speakers for Vocals
and Keyboard
Remote
Of course, once the R-09HR is setup, you can use
the remote to adjust the recording level or to
start/stop the recording.
8
Practical
Guide to the
edirol r-09hr
Point
Point
Optimizing
Setting
recording levels
sound quality
3
4
Before recording the band, find where the loud-
est sound occurs. Adjust the recording level so
that the R-09HR level meter reaches its highest
level without the PEAK indicator, shown in red
below, turning on.
Choose the sound quality according to the purpose.
If sound quality is important:
WAV
If long recording time is important:
MP3
Adjust so the PEAK
indicator light does
not turn on when the
loudest sound occurs
For example, we recommend recording in WAV
format when you want to archive material or
when you’ll use the recording as the master
for making a CD. WAV format maximizes the
features of the R-09HR, so it’s appropriate for
recordings you want to keep.
On the other hand, we recommend recording
in MP3 format when reviewing practices at re-
hearsal studios or when making long recordings.
You can leave the R-09HR recording for an entire
session for later review.
When you are using a remote control, you can use
the remote indicator to determine the recording
level. Adjust the level so that the remote indicator
does not blink fast.
See p. 38-39 in the Owner’s Manual for setting
the recording mode.
See p. 45 in the Owner’s Manual for setting the
recording level.
☞
☞
The optional Cover/Stand Set is not just a simple protective cover.
Convenient stand
attachment!
The optional cover/stand set (OP-R09HR-C) is not just a
protective cover—it connects to the included stand. The
cover can also attach to commercially available tripods
for cameras or video cameras. So if you need the extra
stability, you can use a tripod in place of the stand.
In addition, you can use the mic stand adaptor
(OP-R09M) to attach the R-09HR to a mic stand. With
a single mic stand, you can place the R-09HR in the
optimal position and the optimal height in the studio.
The R-09HR cover
directly to camera
9
Situation
Recording from cassettes
3
Point
Point
Setting
the recording level
Selecting
the cables to use
1
2
First, check the volume setting on the playback
device. If the volume is set too low, then the
volume of the recording will be too low no
matter how high the R-09HR input level is set.
Conversely, if the volume is too high, the sound
will be distorted no matter how you adjust the
level on the R-09HR.
The R-09HR’s audio input uses a stereo mini-
plug. Select a cable that’s compatible with the
output jack(s) on the playback machine. Most
combo or radio-cassette units use an RCA plug;
most compact players use a stereo mini-plug.
Verify the type of plug used by the playback
device in its owner’s manual.
The R-09HR uses a stereo mini-plug.
Most compact cassette players and
digital audio players also use this
plug type.
If the recording level is too low, the
level meter doesn’t move much.
If the recording is made with these
settings, then the sound at play-
back will be unsatisfactory.
RCA connectors are often used for
sound input to mini component stereo
sets and video decks.
Next, find the loudest point of the song to be re-
corded. Every song has its loudest and quietest
points. Set the level so that PEAK light doesn’t
quite turn on when the loudest section is played.
See p. 45 in the Owner’s Manual for setting the
recording level.
☞
10
Note: The actual specifications, appearance, or display screen of the product may be subject to change without notice.
Practical
Guide to the
edirol r-09hr
Point
Setting
sound quality
3
Use WAV format to preserve important recordings that are faithful to the source.
If creating CD
WAV 16 bit/44.1 kHz
or professional quality
WAV 24 bit/96 kHz
Because 16 bit/44.1 kHz is the same setting used on audio CDs, it’s ideal for burning to CD for playback
on a CD player. This format is great for making CDs to pass out to friends, or to keep.
If the sound source is high quality, it may be preferable to use the best quality 24 bit/96 kHz setting.
However, be aware that the 24 bit/96 kHz setting takes up a lot of memory (in other words, the record-
ing time on the SD card is shorter). Also, when making a CD on a PC, you’ll need software capable of
handling a 24 bit/96 kHz sound recording.
See p. 38-39 in the Owner’s Manual for setting the recording mode.
☞
Checking the playback settings is also important!
Portable cassette players and MD players often have built-in features such as equalizers or bass
boosters to intensify the sound. These features are important when listening outdoors so you
can enjoy the music. However, we recommend turning these features off when recording on the
R-09HR for your archives.
Mini component stereo sets and cassettes players also use features such as bass boosting or loud-
ness to intensify the sound from the compact speakers. These features should also be turned off.
If these features are left on, then the lower frequencies will be louder than the other frequencies.
If recorded in this state, the original sound will not be recorded faithfully. Also, it’s difficult to edit
or process these recording later on so that they resemble the original sound.
The best method is to faithfully record the original sound, and then use editing software on a
PC to do any additional processing. Doing so allows you to preserve a faithful recording of the
original sound. Using a copy of the recording, you can then edit or process the sound as much as
you like.
See p. 20 in this guide for PC applications
☞
11
Situation
Recording vocals
4
Point
Point
Setting
recording levels
Placing
the R-09HR
1
2
Have the singer sing the loudest section of the
song. Since the singer may quickly tire of singing
just for setting a recording level, try to deter-
mine the level quickly.
When using the R-09HR internal mic, use the
R-09HR as if it’s a microphone.
You can place the R-09HR as
you would a microphone by
using the optional cover/
sta
Remember that body temperature rises after
singing for a while, and the voice can get louder.
It may be a good idea to set the level a little
lower to compensate for this.
an
(O
See p. 45 in the Owner’s Manual for setting the
recording level.
☞
Unlike other types of recording, when recording
vocals, you should be aware that the singer’s
breaths may be captured by the mic. You can
prevent this by using a pop guard (see photo on
left).
12
Practical
Guide to the
edirol r-09hr
Point
Point
Setting
Precautions
the recording quality
when singing
3
4
The R-09HR internal microphone records in ste-
reo, so sound is recorded realistically. However, if
the vocalist’s head moves during the recording,
the sound will move from side to side during
playback.
Using for vocal training and checking vocals
Sounds like vocals have subtleties that are best
captured by high sound quality. Since long
recordings are not likely, use 16 bit/44.1 kHz or
better high-quality WAV format.
Don't move
your head
The playback of such a record-
ing results in minute fluc-
tuations that don’t sound very
good.
Keep in mind that if you use the 16 bit/44.1 kHz
WAV format, you won’t need to do any conver-
sions on your PC when using the recording to
make a CD.
The R-09HR internal mic is
Using as a voice memo recorder
omni-directional, so these
If you’re using the R-09HR to record ideas for
songs or melodies, use the MP3 format. The
sound quality is sufficient to jog your memory
for melodies. Because the data is compressed,
you have the additional bonus of being able to
record for longer periods of time.
fluctuations are less noticeable.
Consequently, this caution does
not have to be strictly observed,
but with a little effort, a steady
recording can easily be made.
See p. 38-39 in the Owner’s Manual for setting
the recording mode.
☞
Using the Reverb function to add ambience
Often when recording for CD, a reverb effect is added to vocals and acoustic instruments. Reverb
is an effect that adds an aesthetic ambience to a song like one might hear in a concert hall.
The R-09HR has a feature to add a reverb effect during playback.
This feature is convenient for listening to a recording to hear
how it sounds with reverb applied.
When using the reverb feature, record about 4 inch (10 cm)
from the mic to cut out unnecessary natural ambience. If ambi-
ence is recorded, it will interfere with the reverb and the sound
will become garbled.
Press the REVERB button to
apply four types of reverb
effects during playback on
the R-09HR!
1ꢀ
Situation
Recording outdoors
5
Point
Point
Setting
the recording level
Using the Limiter
Effectively
1
2
Set the R-09HR mic gain to HIGH when record-
ing bird songs or other quiet sounds. This setting
makes the microphone very sensitive so that
even the smallest sounds are captured.
Conversely, set the mic gain to LOW when
recording nearby loud noises such as trains for
proper mic sensitivity.
The limiter is a feature that reduces the re-
cording level when the sound being recorded
becomes too high. When the limiter is on and a
loud sound is suddenly played, the noise is
moderated.
But, if the sound being recorded often goes over
the set input level, then a sound that you want
may be moderated. When you listen to the re-
cording later, the overall sound may be muffled.
In the end, setting the input level to the correct
level is a major point.
Set to HIGH for quieter sounds
Set to LOW for louder sounds
Set LIMITER/AGC to ON
After setting the mic gain, check the input level.
Remember to check the PEAK indicator when
the loudest sound is heard!
See p. 45 in the Owner’s Manual for setting the
recording level.
☞
14
Practical
Guide to the
edirol r-09hr
Point
Point
Positioning
the R-09HR
Setting
sound quality
3
4
It is best to plan where to point the mic by imag-
ining listening to the recording later. For exam-
ple, you can create a realistic feel by recording
the murmuring of a brook on the right and the
twittering of the birds on the left.
In normal situations, when you want even just
a little better quality, it’s best to record in WAV
format. However, if you’re recording outside, you
will probably want to record for an extended
time. For this situation, MP3 may be best. MP3
recordings are about 1/10 the size of WAV re-
cordings (at 128 kpbs).
Recording time for 256 MB
300 minutes
Increase realism with
stereo recording
250 minutes
200 minutes
150 minutes
100 minutes
50 minutes
minutes
When the wind is strong, try changing the mic
direction or to use some wind break, such as a
handkerchief or urethane sponge, so that the
wind doesn’t directly blow into the mic.
You can determine the right
direction by recording while
monitoring with head-
WAV (44.1 kHz/16 bit)
MP3 (44.1 kHz/128 kbps)
phones to keep noise from
being recorded.
When an external mic is convenient
Whenever you record outside, there’s always the
chance that you may not be able to get to the place
you want to record from. With an external mic, you can
sometimes reach those hard-to-get-to spots.
Use the optional stereo mic (CS-15), sold separately.
This mic can capture sound from a specific location,
allowing you to target the sound you want. So you
can target the sound you want. And since the R-09HR
operates independently of the mic position, you can
move more freely in the outdoors.
Using LOW CUT to block wind noise
If a strong wind blows into the mic, other sounds will be
affected by the sound of the wind.
Turn LOW CUT on
to cut out lower
frequency sounds
Sometimes the wind is louder than the sound you’re
trying to record, making it impossible to get the
recording you want. If this happens, try turning on
LOW CUT located on the back of the R-09HR. Because
the wind sounds produce low frequencies, you can
reduce the noise by cutting out the lower frequencies
during recording.
15
Situation
Recording meetings
6
Point
Point
Setting the recording
level for meetings
What mic should I use?
Where should I point it?
1
2
First, set the mic gain to HIGH. For normal every-
day volumes, such as meetings, setting the mic
sensitivity to HIGH is best. You can do level checks
by putting the R-09HR into recording standby
during the pre-meeting chatter.
The R-09HR mic is omnidirectional, so if you
want to record all participants equally in order
to clearly record conversation, place it in the
middle of the table. When placing it on the table,
you can eliminate noise from the table by using
a cover stand set (OP-R09HR-C), sold separately.
You should exercise some caution because a loud
noise for even a short time can interfere with
recording the conversation.
You can also turn AGC (Auto Gain Control) on. It
automatically raises or lowers the recording level
to match the loudness of the sound. When you
listen later, you will have a record that has a bal-
anced volume.
Also, when recording a distant single speaker
or sound source, such as a lecture, it is advan-
tageous to use the separately sold stereo mic
(CS-15). This mic records only the sound from the
targeted point, so you can reduce the sounds
from the audiences, such as talking or coughing.
Because the same switch is used for the limiter,
set the switch function to AGC on/off.
Set LIMITER/AGC to ON
SET MIC GAIN to HIGH
See p. 102 of the Owner’s manual to set the
☞
The external microphone
can also be setup as shown.
The R-09HR with the optional
cover/stand set. The R-09HR looks
quite stylish on the tripod.
function of the LIMITER/AGC switch.
16
Practical
Guide to the
edirol r-09hr
Point
Point
Setting
Playback Feature can
sound quality
also be used for transcribing
3
4
Since the purpose of recording a meeting is to
be able to hear what is being said, there is no
strict requirement for good sound quality. More
importantly, the recording will often be for an
extended time, so MP3 is probably the best
format.
You can change the R-09HR playback speed by
pressing the SPEED button during playback. So
you can slow down playback when the lecturer
speaks too quickly to understand.
You can also use the AB repeat buttons during
playback to define a section to play over several
times.
The R-09HR can become a valuable assistant for
transcription if you freely use the“slow playback”
and “repeat playback”features.
MP3 is recommended
for extended recordings
See p. 64 in the Owner’s Manual about setting
playback speeds.
If you need to record for a longer time, set the
bit rate to 64 kpbs. Although this level of com-
pression will degrade the quality, it’s sufficient
for recording conversations during meetings.
☞
See p. 56 in the Owner’s Manual about using
the AB repeat buttons.
☞
See p. 38-39 in the Owner’s Manual for setting
the recording mode.
☞
Using Auto Gain Control (AGC)
The AGC automatically changes the recording level according to the volume of the sound being
recorded. You may think that this convenient feature should be left on all the time.
However, there are times when using AGC is not
appropriate. This is especially the case when you’re
trying to capture the true nature of a sound.
For example, if you record a piano recital with AGC on,
Turning AGC on causes
the recording level
to be automatically
adjusted
you would lose all the inflection and dynamism of the
piano because the sound would be recorded at the
same volume throughout. Also, the recording level is
constantly being increased and decreased, giving the
recording a less natural sound.
For meetings and lectures, it’s best to keep the volume
even so that you can capture what’s being said. This is
when the AGC feature can be best put to use.
17
Application
Techniques for recording
specific instruments
1
Vocals
Ideally, recording occurs in a studio or other enclosed
space that excludes outside noises. If you’re recording
in a room, choose a room where there is little environ-
mental noise (street noise or city noise) and that doesn’t
echo much.
Record
from
the front
The mic should be placed directly in front of the singer.
However, you can place the mic a little below the mouth
to reduce the sound of breathing. By doing this, a more
Avoid recording breaths
(when breathing is loud)
rounded sound, with more lower frequencies, can be
recorded, depending on the voice quality or the settings.
To prevent this effect, set LOWCUT to ON. Doing so will
make the sound more crisp.
Acoustic Guitar
Sound
hole
The acoustic guitar provides rich mid and low frequency
sounds. However, if these sounds are too loud, the
music may sound muffled. In this case, don’t change the
position of the mic (which should be around the 15th or
17th fret), but change its angle so that the mic is at an
angle from the neck of the guitar. This should make the
sound clearer.
Muꢀed sound
Clear sound
When you want to record the sharp sound of strum-
ming the guitar, place the microphone away from the
body near the point where neck is attached, in order to
record the string vibration while reducing the level of
the low and mid frequencies.
Capture the strumming
sound
Electric guitar or bass
When playing the guitar or bass in a studio, the volume and
settings are the same as for performances, in general. If you
want to give the feeling of recording in a room, place the
microphone 10 feet (3 m) or more away. Be aware however,
that if you place the microphone too far away, the sound
may become less clear because there’s too much room
ambience. On the other hand, to create the impression of
the instrument playing directly in front of the listener, place
the microphone about 3 feet (1 m) away or less.
Emphasize
high frequencies
Loud output 3m
Quiet output 1m
If you’re recording in a room, it’s best to directly connect
an effect processor with an amp modeling feature, or an
amp to the R-09HR via cables. Devices with internal amp
modeling can provide realistic sounds when connected
via cables.
Emphasize
low frequencies
Synthesizers and organs
Connect digital instruments such as synthesizers,
organs, samplers, or rhythm machines directly to the
R-09HR LINE IN jack. In particular, digital synthesizers
may have effects or mastering features that allow the
faithful recording of their sounds through cable con-
nections.
Standard
Stereo
mini plug
phone plug
STEREO
LINE IN
For instruments using an amp, use the same distance
rules as for an electric guitar using an amp, as shown
above.
OUT PUT
18
Practical
Guide to the
edirol r-09hr
Drums
Capture everything
from behind
If the mic is pointed toward the bass drum, the snare
drum is off-center and its sound becomes weak.
Therefore, direct the mic so that the bass drum and
snare drum are in a direct line, and they will then be
heard in the center during playback as a clear rhythm.
This placement also helps reduce air puffs into the mic
from the bass drum because the mic is not directly in
the front of the bass drum.
Another idea to consider when the attack is strong but
quiet is to move the microphone 10 feet (3 m) or more
away, or to place the mic in the back of the drum set.
Doing so produces a more rounded sound, and a clear
recording is achieved, making level adjustment easier.
Capture BD and SD
in a direct line
Piano
Unlike small instruments, a piano produces sound from
its entirety. Since the internal microphone is an omni-
directional microphone, it’s especially good at recording
a piano’s stereo sound.
Soundboard
(rich, broad
sounds)
Strings
Position the microphone to maintain a balance between
the strings and the soundboard. Adjust the balance
between the attack and sustain using distance. Try dif-
ferent configurations to obtain the cleanest recording.
(emphasize
attack)
Bright
Adjust the attack and
reverberations with the
strings and soundboard
Adjust for
brightness
and softness
Soft
Wind instruments
When recording a horn section with room sounds, set the
mic at least 10 feet (3 m) away. Don’t point the mic directly
at the bell, but point it slightly upwards toward the bell
to soften the direct sound of the horn and to capture the
reflected sound. Also, to create a stereo effect, leave the
mic where it’s and have the players move apart.
Avoid pointing directly
at the sound but aim
for the bell
On the other hand, when recording a solo performance up
close, woodwinds, like the saxophone, don’t produce sound
solely from the bell but also from the keys. Also, when all the
keys are pressed, the sound from the bell changes suddenly.
For these cases, place the mic slightly down and slightly to
the right or left for a smooth recording.
Stringed instruments
Stringed instruments, such as the violin or contrabass,
are similar to the acoustic guitar. The secret is to have
a balance between the string vibrations and the sound
from the body. The R-09HR internal stereo condenser
mic should be placed about 6 feet (2 m) away, facing
the instrument to capture the room sounds.
Emphasize
the bow
Bringing the mic in to about 3 feet (1 m) produces a
clear, contoured sound. Taking the mic out to 12 feet
(3 – 4 m) produces a full sound. Adjust the mic height
and sound quality (low to increase the low frequencies
and high to have a clearer sound) while monitoring the
sound.
Emphasize
the body
Record
everything
19
Application
Save to a PC!!
2
No problem when your SD card becomes full! You can easily save to a PC using a USB cable.
Transfer the sound files (WAV or MP3)
stored on the SD card to the PC via a
USB connection.
Just connect the R-09HR to a PC with a USB cable, then drag and drop your files. You can take songs you’
ve just recorded and mail them to your friends or release them on your website or blog as you like.
You should record in MP3 if you plan to e-mail your music. If you record in WAV, the file may be too large
to attach to an e-mail.
You can easily edit the file name after saving to a PC. You should use a suitable file name here for future
reference.
Also, you’ll notice that the date and time of the recording
is saved when you look at the file properties of the song
recorded with the R-09HR. This date is taken from the
R-09HR internal clock. However, the internal clock resets if
power is not turned on for several days. Be sure to set the
R-09HR internal clock before recording.
20
Practical
Application
Guide to the
edirol r-09hr
Deleting unnecessary
data on a PC
3
There are many cases when you’ll want to edit the sound after recording, for example to erase the first
five seconds that you don’t need. In these cases, you can use the included pyro Audio Creator LE to edit
the recorded sound (Windows only).
pyro Audio Creator LE has ample editing feature such
as fade-in, fade-out, and normalize, as well as effects
such as mastering limiter. If you master Audio Creator
LE, you’ll be able to edit your recordings freely!
Deleting unnecessary data
pyro Audio Creator LE screen
If you are using Mac OS, you can perform similar
edits using software such as “GarageBand”that is
normally bundled with new Macs. (For details on
operations, see the owner’s manual or help for the
software that you are using.)
Deleting unnecessary data
GarageBand screen
21
Application
Creating CDs on a PC
4
For example, have you ever wanted to have someone listen to your recorded music? If so, CDs are better
than cassettes. Since CD players, and CD car stereos are really common, there’s a better chance that a CD
will get heard. If you have a CD-writeable drive, you can easily create CDs with the included pyro Audio
Creator LE (Windows only). Once you learn how, making CDs is easy, so you should learn how to do it.
1. drag and drop
2. Click
If you have Mac OS, you only need “iTunes.”“iTunes”
comes bundled with Macs, so you can make CDs right
away. (However, be aware that some versions of this
software cannot create CDs! For details , see the owner’s
manual or help for the software that you are using.)
iTunes screen
If you already know that you are going to create a CD, we recommend recording in WAV. 16bit/44.1kHz
on the R-09HR. Since this is the same as the CD specifications, it will take just a short time to convert the
data!!
22
Practical
Application
Guide to the
edirol r-09hr
Techniques for applying
file names
5
Cautions when renaming files
When backing up WAV or MP3 files on the PC that were recorded on the R-09HR, you can make manag-
ing files easier by giving them easy-to-understand files names. Name your files something that’s easily
recognizable, e.g., use the instrument name or place name where the recording was made.
However, there are some restrictions for naming files on the PC. If you name your file with one of the
names shown below, the file will not display properly when it’s played back on the R-09HR. If you’re go-
ing to play the file on the R-09HR, do not use the following file names.
File Name
Description
File names beginning with a
period (.)
These files are ignored by the R-09HR and are not played.
Files using extensions other
than .WAV or .MP3
These files are ignored by the R-09HR and are not played.
Deciding play order on the R-09HR based on file name
We’d like to introduce some file-name tricks when you’re using the R-09HR as a portable music player.
When playing back multiple songs on the R-09HR, the song-order playback mode can be either shuffle
playback (SHUFFLE) or sequential playback (SEQUENTIAL). When sequential playback is selected, the
files are played back in the following order:
(space) ! # $ % & ’ ( ) + , - . 0 1 2 3 4 5 6 7 8 9 ; = @
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z { }
In other words, to create the desired song playback order place a number
sequence in front of the file, such as “001mysong.wav,”“002mysong.wav,”...
“024mysong.wav.”
See p. 52 of the Owner’s Manual for details on sequential playback.
☞
2ꢀ
Options for recording on the R-09HR
OP-R09HR-C
Cover/Stand Set
■
The R-09HR cover is a special cover that preserves the surface of the R-09HR and protects the unit from impact.
The cover is design so the R-09HR can be used while it’s on. There is also a place to attach tripods on the back
of the cover. Attach the stand included with the Cover/Stand Set or a commercially available tripod to set the
R-09HR at the desired height and angle.
The cover can be attached
to commercially available
tripods.
Use the included stand as
a convenient hand grip to
reduce handling noise.
OP-R09M
Microphone Stand Adaptor
■
The Microphone Stand Adaptor allows you to attach the R-09HR to a microphone stand. Because the R-09HR can be
attached to microphone stands in the rehearsal studio, you can freely set it anywhere.
The Microphone Stand Adaptor is essential for studio recordings!
OP-R09HR-P
Pouch
■
The R-09HR cover attaches directly to microphone
stands when using the mic stand adaptor (OP-R09M).
24
Practical
Guide to the
edirol r-09hr
There are many optional items (sold separately) available to help you optimize
your recordings on the R-09HR. All of these items are handy when recording
on the R-09HR!
CS-15
Stereo Microphone
■
The R-09HR internal microphone is omni-directional and picks up a wide range of sounds. It’s useful in many situ-
ations. If you use the optional Stereo Microphone CS-15, you can zero-in on specific sounds. For example, when
recording outdoors, if you want to record the sound of the river, wind, and bird songs, then the internal microphone
is best. If you want to record just one of these sounds, the external Stereo Microphone CS-15 is best.
You can make the best recordings by choosing the microphone that fits the situation.
An easy-to-grip microphone
holder is included
The microphone can also stand alone
CB-R09S
RH-300
Carrying Case
■
Headphones
■
This Carrying Case can hold the R-09HR unit and all the
options you need to make your recordings.
The RH-300 headphones are sealed for optimal
monitoring. Of course these headphones are com-
pletely compatible with the R-09HR. With newly
developed 45 mm drivers using a Neodymium
magnet onboard, these headphones deliver a rich
dynamic range. You can safely play back sounds
even at high volumes.
Of course, the case holds the R-09HR and cover, micro-
phone, and AC adaptor, but it also has pockets for extra
media and batteries.
You can keep all the necessities for recording in the case,
and be ready to leave at any time!
These sealed headphones are ideal for monitoring
recordings outdoors.
Note: The actual specifications, appearance, or display screen of the product may be subject to change without notice.
25
Connect, Expand, Record!!
Examples of connecting accessories
to the R-09HR
Monitor Speakers
Headphones, In-Ear Earphones
or
(MA Series)
(RH-300)
(RH-iE3)
PHONES
Stereo Mic
(CS-15)
MIC
Although the R-09HR internal stereo mic
is excellent, we recommend using the
optional stereo mic (CS-15) when trying
to record sound from a particular source.
DC IN
Cassette/DAT/Open reel, etc.
AC Adaptor
(included)
Use the AC adaptor
for long recording
times without wor-
rying about battery
charge.
LINE IN
You can record from a cassette player
or a mini-combo by connecting its
LINE OUT to the R-09HR LINE IN.
USB
PC
SD Card
Larger capacity means longer
recording times are possible.
(See the next page for details.)
You can back up the data on a
SD card to a PC by connecting
the R-09HR to the PC using the
included USB cable.
26
Note: In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
Practical
Guide to the
edirol r-09hr
R-09HR Specifications
Recorder Part
Input/Output
Tracks
Audio Inputs
●
●
●
●
2 (stereo)
Internal Stereo Microphone
Mic input
Signal Processing
AD/DA conversion: 24 bits, 44.1/48/88.2/96 kHz
(Stereo miniature phone type, plug-in powered mic)
Line input (Stereo miniature phone type)
* The Internal/External MIC and the LINE IN can’t be used at the same time;
only the LINE IN is effective.
Data Type
<For Recording>
* Stereo only
Audio Outputs
●
●
Phones (Stereo miniature phone type)
Format
MP3 (MPEG-1 audio layer 3)
44.1/48 kHz
Nominal Input Level (Variable)
Mic Input: -33dBu (Default input level)
Line Input: 2dBu (Default input level)
* 0 dBu = 0.775 V rms
Sampling Rate
Bit Rates
64/96/128/160/192/224/320 kbps
Input Impedance
Mic input: 30 k ohms
Line input: 15 k ohms
●
Format
WAV
Sampling Rate
Bit Depth
44.1/48/88.2/96 kHz
16/24 bits
Output Level
20 mW (In case 16 ohms load)
●
●
●
●
<For Playback>
Recommended Load Impedance
16 ohms or greater
Format
MP3 (MPEG-1 audio layer 3)
32/44.1/48 kHz
Sampling Rate
Bit Rates
Frequency Response
20 Hz–40 kHz
32–320 kbps or VBR (Variable Bit Rate)
USB Interface
Mini-B type
* Support USB 2.0/1.1 mass storage device class
Format
WAV
Sampling Rate
Bit Depth
32/44.1/48/88.2/96 kHz
16/24 bits
Effects (Playback only. Excludes playback in 88.2 kHz or 96 kHz)
Playback Reverb : 4 types (Hall 1, Hall 2, Room, Plate)
Speed Change : 50–15% of playback speed
●
Memory Card
SD Memory Card
●
Others
Display
●
Recording Time
Settings
unit: minutes
128 x 64 dot graphic display
Size of Memory Card
1GB 2GB 4GB
55
Power Supply
AC Adaptor, Alkaline dry battery LR6 (AA) type x 2,
or Nickel-metal hydride battery (HR15/51) x 2
●
512MB
13
8GB
220
WAVE (24bit/96kHz)
WAVE (24bit/88.2kHz)
WAVE (24bit/48kHz)
WAVE (24bit/44.1kHz)
WAVE (16bit/96kHz)
WAVE (16bit/88.2kHz)
WAVE (16bit/48kHz)
WAVE (16bit/44.1kHz)
MP3 320kbps
27
30
110
120
Current Draw
370 mA
●
●
15
60
110
120
80
240
440
27
54
220
Dimensions
62 (W) x 112.9 (D) x 27 (H) mm
2-1/2 (W) x 4-1/2 (D) x 1-1/16 (H) inches
29
59
240
480
20
40
160
320
Weight
●
22
44
88
176
352
174 g / 7 oz (including batteries and memory card.)
40
81
166
180
797
1993
332
664
Accessories
Owner’s Manual
AC Adaptor
SD Memory Card (512 M bytes)
Remote Control
44
88
360
720
196
490
392
980
1540
3990
3080
7980
MP3 128kbps
Stand
* Each recording time is approximate. The times may change depending on
the card specifications.
* In case that there are plural files, the sum of recording time would be
shorter than above.
CD-Rom (Cakewalk [pyro Audio Creator LE])
USB cable (Mini-B type)
* Expected AA alkaline life under continuous use:
Continuous playback: approximately 5.5 hours
Continuous recording: approximately 4 hours
(These figures will vary depending on the actual conditions of use.)
*
In the interest of product improvement, the specifications and/or appearance
of this unit are subject to change without prior notice.
System requirements
Windows
Macintosh
Microsoft® Windows Vista®
Mac OS X: 10.2 or later
Microsoft® Windows® XP Home Edition / XP Professional / 2000 / Me
*You can update the R-09HR to the most recent system version via the Internet.
27
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Windows® is known officially as: “Microsoft® Windows® operating system.”
Windows Vista is a trademark of Microsoft Corporation.
Apple and Macintosh are registered trademarks of Apple, Inc.
Mac OS is a trademark of Apple, Inc.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson
multimedia.
SDHC Logo is a trademark.
All product names mentioned in this document are trademarks or registered trademarks of
their respective owners.
*
0
5
0
1
2
5
5
6
-
0
1
*
Copyright © 2008 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.
RAM-4311
05012556 08-01-1N
|
Weil McLain SERIES 2 LGB 15 User Manual
Victor Technology 909 User Manual
Ultra Products Mid Tower ATX Case E Torque User Manual
Sony XR C6220R User Manual
Sony XR C6090 User Manual
Sony WM EX382 User Manual
Sony Handycam DCRDVD108 User Manual
Sony CYBER SHOT DSC S730 User Manual
Sony CDX CA400 User Manual
Sony CDC X517M User Manual