43-980.fm Page 1 Monday, August 16, 1999 4:44 PM
Cat. No. 43-980
OWNER’S MANUAL
Please read before using this equipment.
System 360
Caller ID with Callback
With 100 Caller ID
Memories
43-980.fm Page 3 Monday, August 16, 1999 4:44 PM
FEATURES
Your RadioShack System 360 Caller ID with Callback is the
latest in telephone technology. The system displays the call-
er’s telephone number (and name, if available in your area)
and the current date and time, as provided by your local
phone company to Caller ID service subscribers. The sys-
tem’s callback feature lets you dial a caller’s number with
the press of a single button.
The system stores and displays up to 64 single (number
only) or multiple (name and number) Caller ID records.
Your System 360 includes these features:
VIP Call
— lets you mark up to 32 stored names and phone
numbers as important callers. Then, when those callers call,
the system sounds a distinctive tone.
New Call Counter
— displays the number of new calls you
have received.
DELETE Button
a time or all at once.
— lets you erase Caller ID records one at
3
43-980.fm Page 4 Monday, August 16, 1999 4:44 PM
Time and Date Display — displays the current time and
date as provided to Caller ID service subscribers by your lo-
cal telephone company.
Message Waiting Indicator — appears when you have re-
ceived a voice mail message (if you subscribe to the mes-
sage waiting service from your local phone company).
Large Liquid Crystal Display — makes it easy to see call-
er information and the current time and date.
Contrast Control — lets you adjust the display’s contrast
for your own particular preference.
REVIEW Buttons — let you easily scroll through all Caller
ID records stored in memory.
Easy Installation — the system easily connects to your
telephone line so you can quickly begin using it.
Mounting Options — you can place the system on a desk,
shelf, or table, or mount it on a wall.
4
43-980.fm Page 5 Monday, August 16, 1999 4:44 PM
Note: You need four AAA batteries (not supplied) to power
the System 360.
This system has been tested and found to comply with all
applicable UL and FCC standards.
We recommend you record the system’s serial number
here. The number is on the system’s bottom panel.
Serial Number: _________________________
Important Information:
• To use this system, you must be in an area where Caller
ID service is available, and you must subscribe to the
service.
• Your system displays the caller’s name only if this fea-
ture is available in your area and you subscribe to it.
5
43-980.fm Page 6 Monday, August 16, 1999 4:44 PM
FCC INFORMATION
We have designed your System 360 to conform to federal
regulations, and you can connect it to most telephone lines.
However, each Caller ID system (and each device, such as
a telephone or answering machine) that you connect to the
telephone line draws power from the line. We refer to this
power draw as the system’s ringer equivalence number or
REN. The REN is shown on the bottom of the system.
If you use more than one telephone or other device on the
line, add up all of the RENs. If the total is more than five,
your telephone might not ring. In rural areas, a total REN of
three might impair ringer operation. If ringer operation is im-
paired, remove a device from the line.
Your system complies with Part 68 of FCC Rules. You must,
upon request, provide the Federal Communications Com-
mission (FCC) registration number and the REN to your
telephone company. Both numbers are shown on the bot-
tom of the system.
6
43-980.fm Page 7 Monday, August 16, 1999 4:44 PM
Note: You must not connect your System 360 to:
• Coin-operated systems
• Party-line systems
• Most electronic key telephone systems
In the unlikely event that your System 360 causes problems
on the phone line, the phone company can temporarily dis-
connect your service. If this happens, the phone company at-
tempts to notify you in advance. If advance notice is not
practical, the phone company notifies you as soon as possi-
ble and advises you of your right to file a complaint with the
FCC.
Also, the phone company can make changes to its lines,
equipment, operations, or procedures that could affect the
operation of this system. The phone company notifies you of
these changes in advance, so you can take the necessary
steps to prevent interruption of your telephone service.
7
43-980.fm Page 8 Monday, August 16, 1999 4:44 PM
This system complies with the limits for a Class B device as
specified in Part 15 of FCC Rules. These limits provide rea-
sonable protection against radio and TV interference in a res-
idential area. However, your System 360 might cause TV or
radio interference even when it is operating properly.
To eliminate interference, you can try one or more of the fol-
lowing:
• Reorient or relocate the radio or TV receiving antenna
• Increase the distance between the System 360 and the
radio or TV
• Use outlets on different electrical circuits for the System
360 and the radio or TV
Contact your local RadioShack store if the problem contin-
ues.
8
43-980.fm Page 9 Monday, August 16, 1999 4:44 PM
CONTENTS
Preparation ..................................................................... 11
Installing Batteries/Setup .......................................... 11
Adjusting the Display Contrast ................................. 17
Connecting the System ............................................ 18
Connecting to a Phone ..................................... 18
Connecting to an Answering Machine .............. 19
Mounting the System ............................................... 20
Operation ....................................................................... 22
Receiving Calls ........................................................ 22
Reviewing Call Records ........................................... 24
Displayed Call Information ................................ 26
Deleting Call Records .............................................. 28
Deleting a Single Call ....................................... 28
Deleting All Calls .............................................. 29
Using Callback ......................................................... 29
Calling the Last Reviewed Number .................. 31
Using VIP Calls ........................................................ 31
Marking a Call Record as a VIP Call Record .... 32
Unmarking a VIP Call Record ........................... 33
9
43-980.fm Page 10 Monday, August 16, 1999 4:44 PM
Troubleshooting.............................................................. 34
Care and Maintenance.................................................... 35
Lightning.................................................................... 37
10
43-980.fm Page 11 Monday, August 16, 1999 4:44 PM
PREPARATION
INSTALLING BATTERIES/SETUP
You need four AAA batteries (not supplied) to power the
system. For the longest operation and best performance, we
recommend alkaline batteries, such as RadioShack Cat. No.
23-558.
(illustration)
Cautions
:
•
•
Always use fresh batteries of the required size and
type.
Do not mix old and new batteries, different types of bat-
teries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
(illustration)
Follow these steps to install batteries and program the sys-
tem.
Note:
When replacing the batteries, install the new ones
within 1 minute, or the system’s date and time will be lost.
(The Caller ID information, however, stays stored in the sys-
tem’s memory.)
11
43-980.fm Page 12 Monday, August 16, 1999 4:44 PM
1. If you are replacing the batteries, unplug the phone line
and the phone’s cord from the system.
2. Use a Phillips screwdriver
to remove the battery com-
(illustration)
partment screw on the bot-
tom of the system, then
slide the cover off in the
direction of the arrow on
the cover’s door.
3. Insert four fresh AAA bat-
teries into the compart-
ment as indicated by the
polarity symbols (+ and –)
marked inside the com-
partment.
(illustration)
12
43-980.fm Page 13 Monday, August 16, 1999 4:44 PM
4. Turn the system over so
you can see the display.
After you install batteries,
the system beeps and dis-
plays FA640 REV 1.8
(information about the sys-
tem’s software), then SET
LANGUAGEfor a few sec-
onds, then ENGLISH(the
default display language)
appears for about 45 sec-
onds.
(illustration)
5. To select another language,
while ENGLISH appears,
press REVIEW
once to
display French or twice to
display Spanish.
13
43-980.fm Page 14 Monday, August 16, 1999 4:44 PM
Notes:
•
The display shows ENGLISH again if you press
a third time.
REVIEW
•
If you do not press any key within 45 seconds after
pressing REVIEW , the module automatically
selects English. Go to Step 7.
6. Press
REVIEW to store
the selected language. The
module beeps, and 000
and SET AREA CODE
(English), CODIGO DE
AREA
(Spanish),
or
CHOISIR ZONE (French)
appears. The first 0
flashes.
14
43-980.fm Page 15 Monday, August 16, 1999 4:44 PM
7. Within 45 seconds, repeatedly press REVIEW
until
the first digit of your area code appears, then press
REVIEW to set the digit. The second 0flashes.
Notes:
•
•
If you make a mistake while setting the area code,
press DELETE. The cursor moves to the first digit of
the area code. Then repeat Steps 7 and 8 to reset
the area code.
If you do not press any key within 45 seconds in this
step or Step 8, the system automatically sets the
area code to 000. If this happens, remove the bat-
teries, wait about 15 seconds (to reset the memory),
then begin again from Step 3.
8. Repeat Step 7 to set the second and third digits of your
area code.
When you enter the area code’s last digit, the system
beeps once and displays 12:00AM1/01.
15
43-980.fm Page 16 Monday, August 16, 1999 4:44 PM
The telephone company sends the correct time with
each incoming call, so the correct date and time are
automatically set when the system receives its first call.
9. Replace the battery cover and the screw. If you are
replacing the batteries, reconnect the phone lines.
When
flashes in the upper right corner of the display or
the display dims, replace the batteries.
Cautions:
• Always remove old or weak batteries. Batteries can
leak chemicals that can damage your system.
• Dispose of dead batteries promptly and properly; do not
bury or burn them.
• Do not mix old and new batteries, different types of bat-
teries (standard, alkaline, or rechargeable), or recharge-
able batteries of different capacities.
16
43-980.fm Page 17 Monday, August 16, 1999 4:44 PM
ADJUSTING THE DISPLAY CONTRAST
To increase the display contrast, hold down DELETE while
repeatedly pressing REVIEW
.
To decrease the display contrast, hold down DELETE while
repeatedly pressing
REVIEW.
(illustration)
Note:
DELETE
without also pressing one
Do not hold down
of the REVIEW keys. You could accidentally erase the call
memory if you hold down only DELETE.
17
43-980.fm Page 18 Monday, August 16, 1999 4:44 PM
CONNECTING THE SYSTEM
Connecting to a Phone
(illustration)
1. Disconnect the telephone line cord from the phone and
plug it into the system’s LINE jack.
2. Plug one end of the supplied line cord into the system’s
PHONE jack.
3. Plug the other end of the cord into the phone’s jack.
18
43-980.fm Page 19 Monday, August 16, 1999 4:44 PM
Connecting to an Answering Machine
(add new illustration)
1. Disconnect the telephone line cord that connects your
answering machine to your phone from the answering
machine’s jack. Then plug it into the system’s PHONE jack.
2. Plug one end of the supplied line cord into the system’s
LINE jack.
3. Plug the cord’s other end into the answering machine’s
jack.
4. Set your answering machine to answer after two or
more rings. This gives the System 360 time to record
information about the call that the phone company
sends between the first and second rings.
19
43-980.fm Page 20 Monday, August 16, 1999 4:44 PM
Note: Some answering machines block Caller ID informa-
tion from the System 360. If this happens, you might have to
disconnect the answering machine.
MOUNTING THE SYSTEM
You can place the System 360 directly on a desk, shelf, or
table, or mount it on a wall using the supplied mounting
bracket and screws.
Follow these steps to mount the system on a wall.
1. Select a location near the
phone line jack. Then, using
(illustration)
the round holes in the
mounting bracket as a tem-
plate, mark the mounting
screw locations on the wall.
2. Drill two holes about 1/8 inch in diameter in the wall at the
marked locations.
20
43-980.fm Page 21 Monday, August 16, 1999 4:44 PM
3. While holding the bracket against the wall, thread a
screw through each round hole in the bracket, then
tighten the screws.
(illustration)
4. Align the slots on the back of the system with the hooks
on the bracket. Gently push the system down on the
bracket to secure it.
(illustration)
To remove the system from the bracket, press up on the bot-
tom of the system until it snaps off of the bracket.
21
43-980.fm Page 22 Monday, August 16, 1999 4:44 PM
OPERATION
RECEIVING CALLS
Caller ID is a service provided by your telephone company.
When you subscribe to this service, the telephone company
sends the caller’s telephone number (and name, if available)
and the call’s date and time between the first and second
rings. The system receives and displays this information for
each call and updates the display with the current date and
time. The display also shows if caller information is not avail-
able or if the number is blocked by the sender (see “Dis-
played Call Information” on Page 26).
CALLflashes during a new incoming call, the new call indi-
cator flashes, and the call record shows for 20 seconds,
then the number of new calls and NEWCALLSappears. The
new call indicator slowly flashes until you review a call (see
“Reviewing Call Records” on Page 24).
Note:
If you have a phone that has a hold feature, we do not
recommend using hold for very long. The Caller ID informa-
tion sent by the phone company might disconnect a caller
on hold if a new call comes in.
22
43-980.fm Page 23 Monday, August 16, 1999 4:44 PM
If the new call indicator flashes rapidly while the phone is
ringing and you see PRIVATECALL, the caller is blocking
their name or telephone number from being sent.
If you subscribe to your phone company’s message waiting
service, your system can inform you when the phone compa-
ny has messages waiting. If the new call indicator flashes
slowly and you see MESSAGEWAITING, you have a voice
message in your mailbox. This remains until you retrieve the
message or delete the call.
(illustration)
23
43-980.fm Page 24 Monday, August 16, 1999 4:44 PM
REVIEWING CALL RECORDS
Each time you receive a call, your system saves a call
record in memory that you can review later or while you are
on the phone. Your system saves up to 64 call records, then
(for subsequent calls) it replaces the oldest call record with
each new one.
A stored call record includes:
• Call number (order the call is received)
• Time and date of the call
• Caller’s telephone number
• Caller’s name (if available)
Repeatedly press REVIEW
to see more recent call
records or
REVIEW to see older call records.
24
43-980.fm Page 25 Monday, August 16, 1999 4:44 PM
(illustration - show REVIEW buttons)
Note: The system returns to the time/date display after 20
seconds if you do not press a key.
25
43-980.fm Page 26 Monday, August 16, 1999 4:44 PM
Displayed Call Information
The system can display the following information:
Display
(English,
French,
Description
Spanish)
Appears the first time you review a new
XX NEW CALL(S)
call record.
calls.
is the number of new
(all languages)
XX
The caller has blocked the Caller ID
Information from being sent.
-PRIVATECALL-
APPEL PERSON-
NEL
LLAMADA PRI-
VADA
Appears when you reach the end of your
--END--
--FIN--
--FIN--
call records. Press the other
to see them again.
key
REVIEW
Appears if the caller is not within a Caller
ID service area. No caller information
appears.
-OUT OF AREA-
-HORS ZONE-
-FUERA DE AREA-
26
43-980.fm Page 27 Monday, August 16, 1999 4:44 PM
Display
(English,
French,
Description
Spanish)
Appears if the Caller ID information was
garbled, or if there was an error during
the transmission of Caller ID informa-
----ERROR-----
----ERREUR-----
----ERROR-----
tion. A appears where the data is lost.
-
Appears if there are no call records in
the system’s memory when you press a
NO CALLS
AUCUN APPELS
key.
REVIEW
NO LLAMADAS
Appears when a message is waiting (if
you subscribe to your phone company’s
message waiting service).
MESSAGE WAITING
MES. EN ATTENTE
MENSAJE ESPERA
Appears after the system dials a number
PICKUP PHONE
DECROCHEZ
when you press
.
CALLBACK
LEVANTAR TEL
Appears to prompt you to set the area
code.
SETAREACODE
CHOISIR ZONE
CODIGO DE AREA
27
43-980.fm Page 28 Monday, August 16, 1999 4:44 PM
DELETING CALL RECORDS
Deleting a Single Call
Note:
You cannot delete a call marked as a VIP call by us-
ing only the steps in this section. See “Using VIP Calls” on
Page 31.
1. Repeatedly press either
REVIEW key until the call
you want to delete appears.
2. Press DELETE twice.
(illustration)
28
43-980.fm Page 29 Monday, August 16, 1999 4:44 PM
Deleting All Calls
1. Repeatedly press either REVIEW key until --END--
appears.
2. While --END-- appears, hold down DELETE until NO
CALLSappears.
USING CALLBACK
When a phone number you
want to dial appears on the
display, you can press CALL-
BACK to automatically dial it.
DIALING appears, then the
phone number appears. Then,
after the system dials the num-
ber, PICKUPPHONEappears.
(illustration)
29
43-980.fm Page 30 Monday, August 16, 1999 4:44 PM
To complete the call, pick up the phone within 4 seconds af-
ter you see PICKUP PHONE. If you do not pick up the
phone within 4 seconds, PICKUP PHONE disappears and
the system does not complete the call. Otherwise, press
CALLBACK again to redial the number.
Notes:
• If the phone number’s area code matches the area
code you stored, the system simply dials the phone
number. If the phone number’s area code does not
match the area code you stored, the system automati-
cally dials a 1 before dialing the phone number. Or,
press CALLBACK twice to set up the system so it does
not dial a 1 before dialing the phone number.
• If you did not store an area code while installing the bat-
teries, the system displays SETAREACODE for a few
seconds. Follow Steps 6–8 under “Installing Batteries/
Programming the System” on Page 11 to store the area
code. Then press CALLBACK to dial the number again
30
43-980.fm Page 31 Monday, August 16, 1999 4:44 PM
Calling the Last Reviewed Number
To call the phone number in the last call record you re-
viewed, press CALLBACK when the current time and date
appear. The system dials the number and displays PICKUP
PHONE. To complete the call, pick up the phone within 4
seconds after PICKUPPHONEappears.
USING VIP CALLS
If you receive a call from an important caller (someone you
call frequently, for example), you can mark that caller’s call
record as a VIP call. That way, each time you receive a call
from that person’s number, the system sounds 4 quick
beeps each time the phone rings until you answer the call.
You can mark up to 32 call records as VIP calls, and review
and delete the marks at any time.
31
43-980.fm Page 32 Monday, August 16, 1999 4:44 PM
Notes:
• The system protects VIP call records, to make it difficult
to delete them by mistake. To delete a VIP call record,
you must first unmark it using the steps in “Unmarking a
VIP Call Record” on Page 33 then delete it using the
steps in “Deleting a Single Call” on Page 28.
• If you try to mark more than 32 call records as VIP calls,
the system beeps 4 times to indicate its memory is full.
Marking a Call Record as a VIP Call Record
Hint: If there is no call record for a caller you want to assign
as a VIP caller, have the person call you. Then, mark that
call record as a VIP call record.
1. Repeatedly press REVIEW
or REVIEW
to display
the call record you want to mark.
PRIORITY
2. Hold down CALLBACK until
appears on the
display and the system beeps once.
32
43-980.fm Page 33 Monday, August 16, 1999 4:44 PM
As you press REVIEW
or REVIEW
to review stored
PRIORITY
records,
VIP call record.
appears on each record marked as a
Unmarking a VIP Call Record
1. Repeatedly press REVIEW
or REVIEW
to display
the VIP call record you want to unmark.
PRIORITY
2. Hold down CALLBACK until
disappears from
the display and the system beeps once.
33
43-980.fm Page 34 Monday, August 16, 1999 4:44 PM
TROUBLESHOOTING
If your system is not working as it should, these suggestions
might help you eliminate the problem.
Problem
Solution
Battery installation
Blank screen
— Replace or rein-
stall the batteries as described in “In-
stalling Batteries/Programming the Mod-
ule” on Page 11.
Contrast control
— Adjust the contrast
as described in “Adjusting the Display
Contrast” on Page 17.
You have an
incoming
call, but do
not receive
any Caller ID
information.
Someone picked up a telephone on the
same phone line before the system re-
corded the call record. This is not a mal-
function.
No data was sent by the phone compa-
ny with the call (-NODATASENT-ap-
pears). This is not a malfunction.
34
43-980.fm Page 35 Monday, August 16, 1999 4:44 PM
CARE AND MAINTENANCE
Your RadioShack System 360 Caller ID with Callback is an
example of superior design and craftsmanship. The following
suggestions will help you care for your system so you can en-
joy it for years.
Keep the system dry. If it gets wet, wipe it dry
immediately. Liquids might contain minerals
that can corrode the electronic circuits.
Use and store the system only in normal tem-
perature environments. Temperature extremes
can shorten the life of electronic devices, dam-
age batteries, and distort or melt plastic parts.
Keep the system away from dust and dirt, which
can cause premature wear of parts.
Handle the system gently and carefully. Drop-
ping it can damage circuit boards and cases
and can cause the system to work improperly.
35
43-980.fm Page 36 Monday, August 16, 1999 4:44 PM
Use only fresh batteries of the required size and
type. Batteries can leak chemicals that damage
your system’s electronic parts.
Wipe the system with a damp cloth occasionally
to keep it looking new. Do not use harsh chem-
icals, cleaning solvents, or strong detergents to
clean the system.
Modifying or tampering with the system’s internal compo-
nents can cause a malfunction and might invalidate your sys-
tem’s warranty and void your FCC authorization to operate it.
If your system is not performing as it should, take it to your
local RadioShack store for assistance. If the trouble is affect-
ing the telephone lines, the phone company can ask you to
disconnect your system until you have resolved the problem.
36
43-980.fm Page 37 Monday, August 16, 1999 4:44 PM
LIGHTNING
Your system has built-in protection circuits to reduce the risk
of damage from surges in telephone and power line current.
These protection circuits meet or exceed the FCC require-
ments. However, lightning striking the telephone or power
lines can damage your system.
Lightning damage is not common. Nevertheless, if you live
in an area that has severe electrical storms, we suggest that
you unplug the telephone system during storms to reduce
the possibility of damage.
37
43-980.fm Page 38 Monday, August 16, 1999 4:44 PM
NOTES
38
43-980.fm Page 39 Monday, August 16, 1999 4:44 PM
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in mate-
rial and workmanship under normal use for one (1) year from the date of pur-
chase from RadioShack company-owned stores and authorized RadioShack
franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, IN-
CLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICU-
LAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE
WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PRO-
VIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBIL-
ITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT
TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY
BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or
the exclusion of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and
the RadioShack sales receipt as proof of purchase date to any RadioShack
store. RadioShack will, at its option, unless otherwise provided by law: (a) cor-
rect the defect by product repair without charge for parts and labor; (b) replace
the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made,
become the property of RadioShack. New or reconditioned parts and products
may be used in the performance of warranty service. Repaired or replaced parts
and products are warranted for the remainder of the original warranty period. You
will be charged for repair or replacement of the product made after the expiration
of the warranty period.
(Continued)
39
43-980.fm Page 40 Monday, August 16, 1999 4:44 PM
(Continued) This warranty does not cover: (a) damage or failure caused
by or attributable to acts of God, abuse, accident, misuse, improper or
abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or
current; (b) any repairs other than those provided by a RadioShack Au-
thorized Service Facility; (c) consumables such as fuses or batteries; (d)
cosmetic damage; (e) transportation, shipping or insurance costs; or (f)
costs of product removal, installation, set-up service adjustment or rein-
stallation.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St.,
Suite 600, Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
5A7
Printed in Malaysia
|