System Component
Operating Instructions
Model No.
SC-HD510
SC-HD310
The illustrations show SC-HD510 for areas except Australia and N.Z.
Note:
The “EB” indication shown on the outside packing
case indicates United Kingdom.
Before connecting, operating or adjusting this
product, please read these instructions completely.
Please keep this manual for future reference.
EB EP GN
RQT5296-B
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Safety precautions
Before use
Placement
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid distortion
and unwanted acoustical effects.
Safety precautions.....................................................................3
Caution for AC Mains Lead .....................................................4
The remote control ....................................................................5
Installation....................................................................................5
Connections ................................................................................6
Front panel controls..................................................................9
Turning the DEMO function off............................................10
Setting the time ........................................................................11
Saving power in standby mode...........................................11
Do not place heavy items on the unit.
Voltage
Bforuse
Do not use high voltage power sources. This can overload the
unit and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
Radio operations
The Radio: manual tuning.....................................................12
The Radio: preset tuning.......................................................13
AC mains lead protection
Cassette deck operations
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Cassette tapes ..........................................................................14
Do not handle the plug with wet hands. This can cause electric
shock.
Compact disc operations
CDs
Normal play .................................................................................16
Other modes of play ....................................................................17
Foreign matter
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock
or malfunction. If this occurs, immediately disconnect the unit from
the power supply and contact your dealer.
Recording operations
Before recording......................................................................19
Preparatory steps ........................................................................19
Recording the radio.................................................................20
Recording CDs
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Normal recording.........................................................................20
One touch CD editing (AI EDIT) ..................................................21
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these operating instructions occurs,
disconnect the AC mains lead and contact your dealer or an
authorized service center. Electric shock or damage to the unit can
occur if the unit is repaired, disassembled or reconstructed by
unqualified persons.
Timer operations
Using the timers
The play timer..............................................................................22
The record timer ..........................................................................23
The play and record timers..........................................................24
The sleep timer............................................................................24
Using the timers together ............................................................24
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Reference
Using other equipment...........................................................25
Convenient functions .............................................................26
Maintenance ..............................................................................26
Troubleshooting guide...........................................................27
Technical specifications.......................................Back cover
3
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution for AC Mains Lead
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
(For United Kingdom)
(“EB” area code model only)
THE LETTER E, BY THE EARTH SYMBOL
COLOURED GREEN OR GREEN/YELLOW.
OR
For your safety, please read the following text carefully.
THIS PLUG IS NOT WATERPROOF–KEEP DRY.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Before use
Remove the connector cover.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 5-ampere and that it
is approved by ASTA or BSI to BS1362.
How to replace the fuse
Bofruse
The location of the fuse differ according to the type of
AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
Check for the ASTA mark
body of the fuse.
or the BSI mark
on the
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until
a replacement cover is obtained.
1. Open the fuse cover with a screwdriver.
Figure A
A replacement fuse cover can be purchased from your
local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring
code as stated below.
Figure B
Fuse cover
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance
with the following code:
Blue: Neutral, Brown: Live.
2. Replace the fuse and close or attach the fuse
cover.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured Blue must be connected to
the terminal which is marked with the letter N or coloured
Black or Blue.
Figure A
The wire which is coloured Brown must be connected to
the terminal which is marked with the letter L or coloured
Brown or Red.
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
4
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
The remote control
A
Batteries
A
Insert so the poles (+ and –) match those in the remote control.
Do not use rechargeable type batteries.
Do not;
●
mix old and new batteries.
●
use different types at the same time.
●
heat or expose to flame.
●
take apart.
●
short circuit.
●
attempt to recharge alkaline or manganese batteries.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
R6/LR6
(AA, UM-3)
Bforuse
1
2
＋
－
＋
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even
when held close to the front panel.
－
If the battery lid comes loose, slide it back into place horizontally.
B
C
B
Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
Keep the transmission window and the unit’s sensor free from
●
dust.
●
Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
30˚
30˚
7 m
Do not;
●
put heavy objects on the remote control.
take the remote control apart.
spill liquids onto the remote control.
●
●
C
Installation
aSL-HD510 bST-HD510
/310
/310
a CD player
b Tuner
c Cassette deck
d Amplifier
e Left speaker
f Right speaker
Note
cRS-HDA710/
RS-HD310
fSB-HD510/310
●
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
eSB-HD510/310
dSE-HD510/310
●
SC-HD310 only
Left and right speakers are exactly the same.
Caution
●
Use the speakers only with the
recommended system. Failure to do so can
damage the amplifier and speakers, and can
cause fire. Consult a qualified service person
if damage occurs or if a sudden change in
performance is apparent.
●
Do not attach these speakers to walls or
ceilings.
5
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Unless otherwise marked, the illustrations show SC-HD510
sold outside Australia and New Zealand.
2
Adhesive tape
3
Bofruse
1
1
c
(Left)
4
4
(Right)
To household
mains socket
5
3
4
A
a
c
b
Speaker
Amplifier
To connect cables
1
SC-HD510
Blue (–)
SC-HD510
H
H
IG
IG
H
L
H
L
Gray (+)
Gray (+)
White line
W
W
O
O
Blue (–)
Red (+)
Black (–)
To unplug cables
Black (–)
Red (+)
Hold the connector from
both ends and pull it out.
SC-HD310
SC-HD310
(For Australia and N.Z.)
2
FM ANT
75Ω
Red (+)
Black (–)
Red (+)
Black (–)
(For others)
FM ANT
75Ω
6
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic connections for supplied
accessories
A
Before connection
●
Do not connect the AC mains lead until all other connections
are complete.
●
To prepare the AM loop antenna, FM antenna (for Australia
and N.Z.) and speaker cables, twist the vinyl tip and pull off
(a).
●
Disconnect the flat cable on the cassette deck (b).
1 Flat cables.
Bforuse
Keep the cables as flat as possible against the back of the
unit.
2 FM antenna.
Fix the other end of the antenna where reception is best.
3 AM loop antenna.
Keep loose antenna cord away from other wires and cords.
4 Speaker cables.
Connect the cables to the terminals of the same color. Never
allow the exposed wires to contact each other when
connected.
Use only the supplied speakers.
The combination of the system and the front speakers
provides the best sound. Using other speakers can damage
the unit and sound quality will be negatively affected.
(United Kingdom only)
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 4 BEFORE PROCEEDING
TO STEP 5.
5 Connect the AC mains lead.
Insertion of connector
Even when the connector is perfectly inserted, depending on
the type of inlet used, the front part of the connector may jut
out as shown in the drawing.
However there is no problem using the unit.
Connector
Approx. 6 mm
Appliance inlet
For your reference
Information you enter into the unit’s memory, except for time,
remains intact for up to two weeks after the mains lead is
disconnected.
Note
The included AC mains lead is for use with this unit only. Do not use
it with other equipment.
7
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
External unit connections
A
A
(R)
(L)
Tuner
●
●
Turn off the power to all units before making connections.
Refer to the manual of the other unit for details.
(Cables and equipment not included.)
OUT
IN
EXT/
MD
a
To listen to other equipment and make recordings
Connect other equipment to the EXT/MD IN terminals to output
sound through this unit's speakers or to record onto the cassette
deck. Connect this unit to other equipment through the EXT/MD
OUT terminals to record onto another recording device or output
from this unit through the other unit.
(R)
(L)
DIGITAL
OPTICAL
OUT
(R)
(L)
CD player
IN
(L)
OUT
Connect DVD players to the EXT/MD IN terminal on the tuner.
Bofruse
(R)
Stereo phono cable (not included)
White (L)
Red (R)
MD deck, etc.
DIGITAL
OPTICAL
IN
(Recommended MD
deck: SJ-HDA710)
To make digital recordings (a):
Remove the dust cap before use.
Use an optical fiber cable to connect other digital recording
equipment to DIGITAL OPTICAL OUT on the back of the CD player.
This connection enables you to make digital recordings.
B
Tuner
FM outdoor antenna
A
Optional antenna connections
75 Ω coaxial
cable
Use outdoor antennas if radio reception is poor.
(not included)
FM outdoor antenna
B
(For Australia and N.Z.)
30 mm
A
Note
●
Disconnect the FM indoor antenna.
●
The antenna should be installed by a competent technician.
AM outdoor antenna
C
15 mm
Run a piece of vinyl wire horizontally across a window or other
convenient location.
Note
●
Leave the loop antenna connected.
(For others)
(United Kingdom
only)
●
Disconnect the antenna when the unit is not in use. Do not use
the antenna during an electrical storm.
A
Use the antenna
plug adapter
(included)
C
AM outdoor antenna
Tuner
5-12 m
8
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel controls
A
B
C
A
CD player
q Disc tray
w Disc tray open/close button (
OPEN/CLOSE)..................16
A
B
C
e CD TEXT button (CD TEXT) ...................................................16
r Scroll button (SCROLL) .........................................................16
t AI edit button (AI EDIT) ..........................................................21
y Skip/search buttons (
/
,
/
........................16
)
1
2
u Stop button (■) ......................................................................16
i Pause button ( )...................................................................16
o Play button and indicator (u)................................................16
The color of the indicator depends on the operation taking place.
If stopped: orange
OPEN/CLOSE
If playing: green
Bforuse
CD TEXT
SCROLL
AI EDIT
B
Cassette deck
3
4
5
6
7
8
9
! Cassette holder
! Cassette tray open/close button (
OPEN/CLOSE) ..........14
! Counter button (COUNTER)...................................................19
! Dolby noise reduction button (DOLBY NR)..........................14
! Counter reset button (RESET)...............................................14
! Reverse mode select button (REV MODE) ...........................14
! Tape Program Sensor button (TPS SKIP) ............................15
10
11
! Fast forward/rewind buttons (
[TPS]
) ....................15
! Record pause button and indicator (● REC PAUSE) .........20
! Playback buttons and indicators (v, u)..............................14
The color of the indicator depends on the operation taking place.
If stopped, fast forwarding or rewinding: orange
If playing, recording, or carrying out TPS: green
@ Stop button (■) ......................................................................14
OPEN/CLOSE
COUNTER
RESET
REC PAUSE
DOLBY NR REV MODE
TPS SKIP
[
]
TPS
C
Tuner
@ Display panel
12 13 14 15 16
17 18 19 20
The display also shows information for the cassette deck, CD
player, and amplifier.
@ Play timer/record timer button and indicator
(
PLAY/
REC) .....................................................22, 23, 24
@ Clock/timer, demo button
(CLOCK/TIMER, –DEMO)............................................10, 11, 22
@ Set button (SET)......................................................................11
@ Tuning/time adjust buttons
(TUNE/TIME ADJUST ∨, ∧) .............................................11,12
@ Tuning mode button (TUNE MODE)......................................12
21
SC-HD510 for areas except Australia and N.Z.
@ RDS button (RDS)...................................................................12
@ Band select button (FM/AM) ..................................................12
SC-HD310 SC-HD510 for Australia and N.Z.
TUNE MODE
RDS
FM/AM
PLAY/ REC CLOCK/TIMER
SET
TUNE/TIME ADJUST
@ FM band select button (FM)...................................................12
@ AM band select button (AM) ..................................................12
–
DEMO
22
23 24
25
26 27 28
9
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel controls
C
A
A
Amplifier
@ Standby indicator
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the unit
is turned on.
A
29
30 31 32 33
34 35
36
# Standby/on switch ( /I) ........................................................11
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
BLFS
INPUT SELECTOR
/
I
MODE
VOLUME
–
DVD DIRECT
# ECO mode button (MODE).....................................................11
# Headphone jack (PHONES)....................................................25
# Volume control (VOLUME).....................................................12
FINE TWEETER CONTROL
PHONES
SC-HD510 only
Bofruse
MIN
MAX
DOWN
UP
# Bass button (BLFS) ................................................................26
# Input selector (INPUT SELECTOR
) .................................25
# Input selector (INPUT SELECTOR
# Fine tweeter control (FINE TWEETER CONTROL)...............26
, -DVD DIRECT)........25
37
SC-HD310 only
B
# Bass button (BASS)................................................................26
# Treble button (TREBLE).........................................................26
# Input selector (INPUT SELECTOR) .......................................25
38
30
45
46
SLEEP
PLAY
REC
1
4
7
2
5
8
3
6
9
>
10
39
40
0
B
Remote control
47
48
PROGRAM
RANDOM
CANCEL
REPEAT
Buttons # and # function in the same way as the controls on
the main unit.
41
AUTO/
MONO
# Sleep timer button (SLEEP)...................................................24
# Numbered buttons..................................................................13
$ Program button (PROGRAM).................................................18
$ Random button (RANDOM)....................................................17
$ Input select buttons
a
MD
CD
49
50
TAPE
EXT/MD TUNER
42
43
TUNE
TUNE
MUTING
VOLUME
(CD, TAPE, EXT/MD, TUNER)...............................12, 15, 17, 25
$ Basic operating buttons
44
33
Function changes according to the source.
$ Muting button (MUTING) ........................................................26
$ Play timer button (
PLAY) .................................................22
$ Record timer button (
REC) ..............................................23
B
a
$ Cancel button (CANCEL) .......................................................18
$ Repeat button (REPEAT)........................................................17
$ FM mode button (AUTO/MONO)............................................12
% Tuning buttons (TUNE ∧, TUNE ∨) .....................................12
A
C
D
MD
For areas except Australia and N.Z.
MD deck operations (when connected to MD deck SJ-HDA710
(sold separately)) a
C
CLOCK/TIMER, –DEMO
A Stop button (■)
B Pause button (
)
C Play button (s)
D Skip/search buttons (
/
,
/
)
C
Turning the DEMO function off
If the clock has not been set, a demonstration of the display is
shown when the unit is off.
This function is set to on at the time of purchase.
CLOCK/TIMER
– DEMO
To get the most from ECO mode ( page 11), turn this function off.
a
Press and hold [CLOCK/TIMER, –DEMO] until
“NO DEMO” is displayed.
Each time you press and hold the button:
DEMO MODE (on)
NO DEMO (off)
10
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Setting the time
1
This is a 24-hour clock.
The example shows how to set the clock for Wednesday 16:25
(4:25 pm).
A
1 Press [ /I] to turn the unit on.
q
2
Press [CLOCK/TIMER, –DEMO] to
display “CLOCK.”
Each time you press the button:
CLOCK
PLAY
REC
Original display
w Within 7 seconds
Press [SET].
2 3, 4
Bforuse
/ I
1
2
q
3
4
Press [TUNE/TIME ADJUST
(∨ or ∧)] to set the day.
Press [SET].
w
q
Press [TUNE/TIME ADJUST
(∨ or ∧)] to set the time.
Press [SET].
CLOCK/TIMER
– DEMO
1
2
w
The time is set and the original display is restored.
Displaying the clock
Press [CLOCK/TIMER, –DEMO].
The clock is shown for about 5 seconds.
SET
1
2
TUNE/TIME ADJUST
3
B
Saving power in standby mode
When this mode is turned on, the clock is not displayed when the
unit is in standby mode, thereby reducing standby mode power
consumption from 9 W to 0.8 W. The standby indicator still lights.
SET
Note
Turn DEMO off. ECO does not work when DEMO is on.
Turning ECO on and off:
1
2
TUNE/TIME ADJUST
4
q Press [ /I] to turn the unit on.
w Press [MODE].
The current mode is displayed. Press again to change the mode.
Each time you press the button:
SET
NORMAL (off)
ECO (on)
The mode can be switched to ECO when the unit is off but it can
not be switched back to NORMAL.
B
1
2
MODE
/I
11
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
The Radio: manual tuning
/I
Radio stations can be tuned manually by selecting the station’s
frequency or they can be preset into channels to make it easy to
4
tune with the remote control ( page 13).
a
Preparation: Turn the unit on.
SC-HD310 SC-HD510 for Australia and N.Z.
1
SC-HD310 SC-HD510 for Australia and N.Z.
1
Press [FM] or [AM] to select the band.
SC-HD510 for others
Press [FM/AM] to select the band.
Each time you press the button:
FM
AM
2 Press [TUNE MODE] to select “MANUAL”.
Each time you press the button:
MANUAL PRESET
RDS
SC-HD510 for others
1
3
2
3 Press [TUNE/TIME ADJUST (∨ or ∧)]
SC-HD310 SC-HD510 for Australia and N.Z.
to select the frequency of the required
1
FM
AM
station.
“TUNED” is displayed when a radio station is tuned.
“STEREO” is displayed when a stereo FM broadcast is being
received.
Rdperations
SC-HD510 for others
FM/AM
4 Adjust the volume.
On the remote control
1. Press [TUNER] to select the band.
2. Press [TUNE ∧] or [TUNE ∨] to select the frequency.
Auto tuning
Press and hold [TUNE/TIME ADJUST (∨ or ∧)] for a moment until
the frequency starts changing rapidly. The unit begins auto tuning,
stopping when it finds a station.
TUNE MODE
2
3
RDS broadcasting
SC-HD510 for areas except Australia and N.Z.
TUNE/TIME ADJUST
This unit can display the text data transmitted by the radio data
system (RDS) available in some areas.
Changing the display
Press [RDS].
TUNED STEREO
Each time you press the button:
→PS display (the name of the station)
↓
VOLUME
PTY display (the type of program)
↓
4
RT display (various kinds of information, such as call-in
↓
numbers, weather, and news.)
Frequency display
Note
RDS displays may not be available if reception is poor.
DOWN
UP
One touch play
A
A
RANDOM
REPEAT
Remote control only
When the unit is off, press [TUNER].
The unit comes on and starts playing the radio with the volume fading in.
AUTO/
MONO
AUTO/
MONO
MD
CD
TAPE
EXT/MD TUNER
TUNE
TUNE
If noise is excessive in FM
A
MUTING
TUNER
Remote control only
VOLUME
Press [AUTO/MONO] to display “MONO”.
Each time you press the button:
AUTO
MONO
This mode improves sound quality if reception is weak for some
reason but broadcasts are heard in monaural.
Press [AUTO/MONO] again to cancel the mode.
MONO is also canceled if the frequency is changed.
Leave the tuner in AUTO for normal listening. Stereo and monaural
broadcasts are automatically played as they are received.
12
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
The Radio: preset tuning
Choose either automatic presetting, which presets all the stations
the tuner can receive, or manual presetting, which allows you to
select the stations to preset and the order they are to be preset in.
There are 39 channels available for presetting.
A
TUNE/TIME ADJUST ∨, ∧
Automatic presetting
A
Do the following once each for FM and AM.
Preparation: Tune to the frequency presetting is to begin at.
(
a
page 12).
Hold down [SET].
Release the button when “AUTO MEMORY” appears.
The tuner presets all the stations it can receive into the channels in
ascending order. FM stations are preset into channels 1 to 39, and
AM stations are preset into channels 21 to 39.
SET
TUNE MODE
“SET OK” is shown when presetting is complete and the last station
to be preset is played.
SET
“ERROR” is displayed if the tuner doesn’t receive any stations. Do
presetting manually if this happens (see below).
Note
Rdperations
AM stations replace any FM channels that were preset in channels
21 to 39.
Preset channel
Manual presetting
PRESET TUNED
Preset the stations one at a time.
PRESET TUNED
q Tune to the required station.
w Press [SET].
e Press [TUNE/TIME ADJUST (∨ or ∧)] to select a channel.
r Press [SET].
B
SLEEP
PLAY
REC
The station occupying a channel is erased if another station is
preset in that channel.
1
4
7
2
5
8
3
6
9
>
10
2
1
0
Selecting channels
B
PROGRAM
RANDOM
CANCEL
REPEAT
On the remote control
AUTO/
MONO
1 Press [TUNER].
MD
CD
TAPE
EXT/MD TUNER
The unit automatically comes on.
TUNE
TUNE
MUTING
2 Press the numbered buttons to select
VOLUME
the channel.
For channels 1 to 9 press the corresponding number.
For channels 10 or over press [≥10], then the two digits.
e.g. To select channel 21 [≥10] → [2] → [1]
TUNER
1
2
On the main unit
1. Press [TUNE MODE] to select “PRESET”.
2. Press [TUNE/TIME ADJUST (∨ or ∧)] to select the channel.
2
3
1
4
7
Preset channel
>
10
6
9
5
PRESET TUNED
0
8
13
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette tapes
/I
Preparation: Turn the unit on.
5
1 Press [ OPEN/CLOSE], insert the
cassette with the tape facing in.
1
RESET
Make sure the cassette is fully inserted and press
[
OPEN/CLOSE] to close the deck.
2 Press [DOLBY NR] to select Dolby NR
on (“
” appears) or off.
NR
3 Press [REV MODE] to select the
reverse mode.
Every time the button is pressed:
: One side is played.
: Both sides are played.
■
: Both sides are played eight times each.
2 3
4
v
u
4 Press [ ] or [ ].
OPEN/CLOSE
Play begins and the indicator changes to green.
u: to play the forward side (facing up).
v: to play the reverse side (facing down).
1
5 Adjust the volume.
A
To stop the tape
Press [■].
DOLBY NR
Resetting the tape counter
A
2
3
4
5
Press [RESET].
Cdckperations
NR
NR
NR
Cassette tape selection and care
REV MODE
The unit can correctly play the following types. It identifies the type
automatically.
Normal position/TYPE 1
High position/TYPE 2
Metal position/TYPE 4
✔
✔
✔
●
●
●
Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
Tape slack can get caught up in the mechanism and should be
taken up before the tape is played.
Endless tapes can get caught up in the deck’s moving parts if
used incorrectly. Use tapes appropriate to this unit’s auto-reverse
mechanism.
VOLUME
Dolby noise reduction
DOWN
UP
Dolby NR reduces “hissing” when playing tapes. It increases the
high frequency region when recording and then reduces it in
playback. Use the same system during playback and recording.
This unit has Dolby B NR which reduces noise to a third.
A
RESET
Prerecorded cassettes and equipment marked “
NR.
” use Dolby B
NR
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
Laboratories Licensing Corporation.
are trademarks of Dolby
14
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette tapes
Fast-forwarding and rewinding
A
Press [
TPS] or [TPS
] while the tape
is stopped.
rewind
fast-forward
A
B
Tape direction
u
v
High-speed fast-forward/rewind
This cassette deck is designed to roughly double fast-
forward/rewind speed automatically.
When you fast-forward from the beginning of the tape or rewind
from the end of it, the tape runs at high speed.
When approaching the end of the tape, the deck automatically
drops to normal speed.
[TPS]
One touch play
B
AUTO/
MONO
MD
CD
TAPE
EXT/MD TUNER
Remote control only
TAPE
TUNE
TUNE
When a cassette is loaded and the unit is off, press [TAPE].
The unit comes on and starts play in the direction last selected with
the volume fade in.
MUTING
VOLUME
Tape program sensor (TPS)
C
TPS finds the beginning of a track and starts play from there. You
can skip up to nine tracks.
C
1 Press [TPS SKIP] to select the
number of tracks you want to skip.
Cdckperations
2 Press [
TPS] or [TPS
the direction.
] to select
backward
forward
Tape direction
u
v
Pressing [
TPS] or [TPS
] during play takes you to
1
2
the beginning of the current track or the next track,
depending on tape direction.
TPS SKIP
To cancel
Press [■].
1
2
Note
●
Stop the tape before changing the TPS direction.
●
TPS may not operate correctly in the following situations:
[
]
TPS
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
15
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
CDs
/I
Normal play
Preparation: Turn the unit on.
3
1
1 Press [ OPEN/CLOSE] to open the
tray.
Set a CD label up on the tray.
Press [
OPEN/CLOSE] to close the tray.
The number of tracks and playing time is displayed if “CD” is
selected as the source.
u
2 Press [ ] to start play.
■
2
3 Adjust the volume.
Total playing
time
Total number
of tracks
To stop the disc
Press [■].
OPEN/CLOSE
1
To pause play
Press [ ] during play. Press [ ] or [u] to resume play.
Label must
face upward.
Skipping tracks
Press [
/
] (backward), or [
/
] (forward).
Searching through tracks
During play
Press and hold [
/
] (backward), or [
/
] (forward).
“NO DISC” is displayed
When the unit is in CD mode but a disc isn’t in the player.
Elapsed play
time
Track number
2
3
Note
●
You cannot skip to tracks already played in random play.
(
a
page 17).
●
●
Skipping is done in the selected order in program play.
page 18).
You can search only within tracks in random and program play.
VOLUME
(
a
Cmdcperations
CD text discs
A
DOWN
UP
This unit reads and displays the information on these discs.
A
To switch between the text display and the normal display:
Press [CD TEXT].
Scrolling the text
Press [SCROLL].
“SCROLL ON” is shown and the information scrolls across the
display.
Press [SCROLL] again to cancel.
CD TEXT SCROLL
Scroll does not work if the text is less than 12 letters.
B
a
CD selection and care
B
Choose discs with these marks: (a)
b
c
Do not;
●
use irregularly shaped CDs (b).
●
attach extra labels and stickers.
●
use CDs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers (c).
●
attach scratch-proof covers or any other kind of accessory.
●
write anything on the CD.
●
clean CDs with liquids (Wipe with a soft, dry cloth.).
16
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
CDs
One touch play
A
SLEEP
PLAY
REC
Remote control only
When a CD is loaded and the unit is off, press [CD].
The unit comes on and starts play with the volume fading in.
1
4
7
2
5
8
3
6
9
>
10
>
1-9, 0, 10
0
PROGRAM
RANDOM
CANCEL
REPEAT
Other modes of play
REPEAT
RANDOM
CD
Remote control only
AUTO/
MONO
MD
CD
TAPE
EXT/MD TUNER
Preparation:
Press [CD] to put the unit in CD mode.
TUNE
TUNE
s
MUTING
VOLUME
Direct access play:
Starts normal play from a selected track
B
Select the track with the numbered buttons.
For tracks numbered 10 and over, press [≥10] then the two digits.
Random play:
Plays the tracks once each in random order
CD
A
B
C
Press [RANDOM].
To cancel
Press [RANDOM].
“RANDOM” goes out.
2
3
1
4
7
>
10
6
5
Repeat play:
Repeats all tracks or programmed tracks
0
9
8
D
Press [REPEAT] before or during play.
To cancel
Cmdcperations
Press [REPEAT].
“
” goes out.
Repeating selected tracks
1. Program the track(s) ( step 1 and 2, page 18).
RANDOM
C
D
a
2. Press [REPEAT] to display “
3. Press [s].
”.
RANDOM
REPEAT
17
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
CDs
Other modes of play
SLEEP
PLAY
REC
Program play:
Select up to 24 tracks to play in the order you choose
1
4
7
2
5
8
3
6
9
>
10
2
Remote control only
0
CANCEL
Preparation:
Press [CD] to put the unit in CD mode.
1
PROGRAM
RANDOM
CANCEL
REPEAT
1 Press [PROGRAM].
AUTO/
MONO
MD
CD
TAPE
EXT/MD TUNER
2 Enter the track number with the
TUNE
TUNE
3
MUTING
numbered buttons.
For tracks numbered 10 and over, press [≥10] then the two
digits.
VOLUME
Repeat this step to program the tracks in the required order.
s
3 Press [ ].
All the tracks are played in the selected order.
To cancel
Press [PROGRAM].
“CLEAR” is displayed and all the tracks are canceled. If a track was
playing, play continues to the end of the CD.
1
2
PROGRAM
PRGM
“FULL” is displayed
If 24 tracks have been programmed. No more tracks can be
programmed.
Programmed
track number
2
1
3
6
9
“
--:--” is displayed
Programmed
order
>
10
If total playing time for the tracks is over 199 minutes and 59
seconds or track numbered 25 or over was programmed. Tracks
can still be programmed and played.
5
4
7
0
8
PRGM
To check the contents of the program
Press [
/
] or [
/
] while stopped. The track numbers
and program position are displayed in order each time you press
the button.
Cmdcperations
PRGM
To add to the end of the program
Repeat step 2.
Total playing time
Canceling tracks (only while stopped)
From the last track
A particular track
All tracks
Press [CANCEL]. “CANCEL” is displayed.
3
/
Select the track with [
or
]
/
[
] then press [CANCEL].
Press [■]. Program play is also cleared.
18
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Before recording
Selection of tapes for recording
The unit automatically identifies the type of tape.
Normal position/TYPE 1
High position/ TYPE 2
Metal position/ TYPE 4
✔
A
B
✔
✔
To display the tape counter while recording
A
Press [COUNTER].
The counter is displayed for about five seconds.
Erasure prevention
B
COUNTER
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.
Side A
Volume and sound quality
Recordings are unaffected by changes to volume and sound
quality.
Tab for side “B”
Normal tape
Tab for side “A”
To re-record
C
Hi-position tape
Preparatory steps
Do these steps before each recording.
Wind up the leader tape so recording can begin immediately
(unnecessary if CD editing).
Detection hole
1 Press [ OPEN/CLOSE], insert the
cassette with the tape facing in.
C
Make sure the cassette is fully inserted and press
2 3
1
[
OPEN/CLOSE] to close the deck.
2 Press [DOLBY NR] to select Dolby NR
on (“
” appears) or off.
NR
“Dolby noise reduction” page 14).
(
a
3 Press [REV MODE] to select the
Rcdgperations
reverse mode.
Each time you press the button:
: One side only records.
and
: Both sides record (forward → reverse).
” automatically changes to “
when [● REC PAUSE] is pressed.
“
”
OPEN/CLOSE
1
Erasing recordings
1. Press [INPUT SELECTOR] to select “TAPE”.
2. Press [DOLBY NR] so that “
3. Select the reverse mode.
4. Press [● REC PAUSE].
5. Press [v] or [u].
” goes off.
NR
DOLBY NR
2
3
NR
REV MODE
NR
19
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Recording the radio
Preparation: Do the preparatory steps ( page 19).
a
1 Tune to the required station.
■
2
3
(
a
page 12 or 13)
2 Press [● REC PAUSE].
The deck goes into the recording standby mode, [● REC
PAUSE] indicator lights and a play indicator starts flashing.
v
u
3 Press [ ] or [ ] to start recording.
u: to record on the forward side
v: to record on the reverse side
To stop recording
Press [■].
To temporarily stop recording
Press [● REC PAUSE].
The deck goes into recording standby mode.
Press the [v] or [u] button with the flashing indicator to resume
recording.
■
A
Recording CDs
B
Normal recording
REC PAUSE
2
Preparation: Do the preparatory steps ( page 19).
a
1 Insert a CD.
(
a
page 16)
v
u
2 Press [ ] or [ ] then [■] to set the
3
tape direction.
u: to record on the forward side
v: to record on the reverse side
3 Press [● REC PAUSE].
B
The deck goes into the recording standby mode, [● REC
PAUSE] indicator lights and the play indicator starts flashing.
u
4 Press [ ] on the CD player.
Rdcgperations
2
Recording starts automatically.
Four seconds after the CD finishes, the deck goes into the
recording standby mode.
To stop recording
EITHER
REC PAUSE
3
4
Press [■] on the CD player.
The deck goes into the recording standby mode four seconds later.
OR
Press [■] on the deck.
Recording stops immediately but the CD continues to play.
To record programmed tracks.
Program tracks after step 1 ( step 1 and 2, page 18).
a
20
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording CDs
A
One touch CD editing (AI EDIT)
■
The unit calculates the length of the tape and decides which tracks
go on which side of the cassette so tracks are not cut off midway.
AI EDIT
1 2
Preparation: Do the preparatory steps ( page 19).
a
Insert a CD.
Press [AI EDIT].
The unit makes the calculations and “AI EDIT TAPE” scrolls across
the display. It takes a moment for recording to start.
After the deck completes recording the CD
It goes into recording standby mode. If there is space left on the
tape, “LINK” and the remaining time on the tape flash on the
display.
■
●
If you have completed recording, press [■] on the deck or the CD
player.
●
If you wish to continue recording with another CD, see “Linking”
below.
A
AI EDIT
To stop editing
Press [■] on the deck or the CD player.
“EDIT OUT” is displayed and both sections stop.
When tracks are allotted to both sides
When the tracks allotted to side A finish playing, the deck records to
the end of the side to complete calculation.
B
Editing programmed tracks
OPEN/CLOSE
1
Program the tracks ( step 1 and 2, page 18) and press [AI EDIT].
a
Note
Track numbered 25 or over cannot be recorded by one touch
editing. Use normal recording ( page 20).
a
2
Linking
B
If “LINK” is flashing and you wish to continue recording from another
CD, do the following.
1 Press [ OPEN/CLOSE] and insert
another CD.
Press [
OPEN/CLOSE] to close the tray.
Rcdgperations
u
2 Press [ ] on the CD player.
Recording begins again.
You can continue linking tracks as long as there is space on the
tape. If you load a CD that has no tracks short enough to fit in the
remaining space, linking cannot be done.
To cancel
Press [■] on the deck or the CD player.
“EDIT OUT” scrolls across the display.
Linking programmed tracks
Program tracks after inserting the new CD ( step 1 and 2, page
a
18).
Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may
infringe copyright laws.
21
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timers
3
The play timer
This timer starts play of the selected source at the selected time.
The example shows settings for preset radio channel 3 to play
between 6:30 and 7:40, Monday to Friday at –40 dB.
PLAY/ REC
Preparation: Turn the unit on, set the time ( page 11), preset
a
radio stations if you want the timer to start playing the
radio ( page 13).
a
q
1
2
Press [CLOCK/TIMER, –DEMO] to
select “ PLAY.”
CLOCK
PLAY
REC
Original display
w
q
Press [SET] within 15 seconds.
1
2
Press [TUNE/TIME ADJUST (∨ or ∧)]
to select the condition required and
CLOCK/TIMER
1
2
1
2
w
press [SET].
Repeat steps q and w to complete items q to t.
– DEMO
PLAY
q Select the day.
“SUN” ... “SAT” = One day of the week.
“SUN TO SAT” = Everyday of the week.
“MON TO SAT” = Everyday from Monday to
Saturday.
“MON TO FRI” = Everyday from Monday to
Friday.
SET
“SAT, SUN” = Saturday and Sunday only.
w Select the start time.
e Select the finish time.
r Select the source.
q
w
e
r
1
PLAY
PLAY
PLAY
PLAY
PLAY
PLAY
TUNE/TIME ADJUST
TUNER
CD
TAPE
If you select TUNER
Select a preset channel.
2
t Select the volume.
The timer is now on standby. The display shows each
condition again for 3 seconds each then restores the original
display.
SET
Confirm the indicator next to [
PLAY” on the display.
PLAY/
REC] lights and
“
3 Press [ /I] to turn the unit off.
The timer starts at the set time with the volume increasing
gradually to the set level.
Tmperations
t
/ I
To cancel the timer
Turn the unit on.
3
On the remote control
Press [
On the main unit
Press [ PLAY/
Each time you press the button:
PLAY→ REC→ PLAY
PLAY] so “
PLAY” goes out.
REC] so “
PLAY” goes out.
REC→off (no display)
↑
The timer function will be canceled, but the settings stay in the
memory.
22
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timers
3
The record timer
This timer records the radio at the set time.
The example shows settings for recording preset channel 3 on
Saturday from 18:30 to 19:30.
PLAY/ REC
Preparation: Turn the unit on, set the time ( page 11), preset
a
radio stations ( page 13).
a
q
1
2
Press [CLOCK/TIMER, –DEMO] to
select “ REC”.
CLOCK
PLAY
REC
Original display
w
q
Press [SET] within 15 seconds.
1
2
Press [TUNE/TIME ADJUST (∨ or ∧)]
to select the condition required and
w
press [SET].
CLOCK/TIMER
1
2
1
2
Repeat steps q and w to complete items q to r.
– DEMO
q Select the day.
REC
“SUN” ... “SAT” = One day of the week.
“SUN TO SAT” = Everyday of the week.
SET
w Select the start time.
e Select the finish time.
r Select the preset channel.
The timer is now on standby. The display shows each
condition again for 3 seconds each then restores the original
display.
Confirm the indicator next to [
REC” on the display.
PLAY/
REC] lights and
1
q
w
e
r
“
TUNE/TIME ADJUST
REC
REC
REC
REC
3 Press [ /I] to turn the unit off.
Recording starts 30 seconds before the set time with the
volume muted during the set time.
To cancel the timer
Turn the unit on.
On the remote control
Press [
On the main unit
Press [ PLAY/
Each time you press the button:
PLAY→ REC→ PLAY
2
SET
REC] so “
REC” goes out.
REC] so “
REC” goes out.
REC→off (no display)
↑
REC
Tmperations
The timer function will be canceled, but the settings stay in the
memory.
/ I
3
23
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timers
A
The play and record timers
Checking the timers
Press [CLOCK/TIMER, –DEMO] to select “
PLAY” (or “
REC”)
[
PLAY/
REC] indicator
The timer conditions are shown in the following order:
A
Day → start time → finish time → source → (“
The timers can be checked even if the unit is off.
Playing the unit after the timers are set
PLAY” only) volume
The unit can be used after the timers are set. Make sure the unit is
off before the set start time.
Note
●
If the unit is turned off while a timer is functioning, the finish time
CLOCK/TIMER, –DEMO
setting will not be activated.
●
The timers (either one or both) are set when the [
REC] indicator is on.
PLAY/
CLOCK/TIMER
– DEMO
B
The sleep timer
Remote control only
This timer turns the unit off after a set time.
While playing a source
Press [SLEEP] to select the time (minutes).
Each time you press the button:
SLEEP 30 SLEEP 60
B
SLEEP 90
SLEEP 120
SLEEP
PLAY
REC
SLEEP
SLEEP OFF
To cancel the sleep timer
Press [SLEEP] to select “SLEEP OFF.”
“SLEEP” goes out.
1
4
7
2
5
8
3
6
9
>
10
0
PROGRAM
RANDOM
CANCEL
REPEAT
To confirm the remaining time
(While the timer is functioning)
Press [SLEEP].
AUTO/
MONO
MD
CD
The remaining time is shown for about five seconds.
TAPE
EXT/MD TUNER
To change the setting
Press [SLEEP] to display the remaining time, then press again to
select the required time.
SLEEP
Note
SLEEP
The sleep timer is canceled if one touch editing is started.
Tmperations
Using the timers together
Any of the timers can be used together, but ensure the unit is off
before the start time for the record and play timers.
24
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Using other equipment
●
REC PAUSE
A
Listening to an external source
1 Press [INPUT SELECTOR] to select
v, u
DOLBY NR, REV MODE
■
EXT/MD mode.
SC-HD310
1
Each time you press [INPUT SELECTOR]:
TUNER
CD
TAPE
EXT/MD
On the remote control
Press [EXT/MD].
2 Operate the unit.
See the unit’s manual for details on operation and connection
page 8).
(
a
INPUT SELECTOR,
–DVD DIRECT
SC-HD510
Enjoying sound from a DVD player
B
1
SC-HD510 only
A
Select the DVD mode to enjoy high quality from a DVD player
connected to the EXT/MD IN terminals.
SC-HD510
SC-HD310
INPUT
SELECTOR
INPUT SELECTOR
1
Press and hold [INPUT SELECTOR
,
-DVD DIRECT] until “DVD” is displayed.
VD DIRECT
To cancel
Press [INPUT SELECTOR] to select another source.
Note
The DVD mode is designed specifically for use with DVD player.
The volume level will change if you select this mode while
equipment other than a DVD player is connected.
B
C
INPUT SELECTOR
Recording an external source
q Press [INPUT SELECTOR] to select EXT/MD
– DVD DIRECT
mode.
w Select Dolby NR and reverse mode.
e Press [● REC PAUSE].
r Press [v] or [u] to start recording.
t
Start the source to be recorded.
See the unit’s manual for details on operation and connection.
To stop recording
Press [■] on the deck.
Recording onto an external unit
Rfrnce
Start recording on the external unit and start playing the source to
be recorded.
C
Using headphones (not included)
Reduce the volume before connection.
Avoid listening for prolonged periods of time to prevent hearing
damage.
Plug type: 3.5 mm stereo.
25
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient functions
A
Adjusting the treble range
SC-HD510 only
Fine adjustments to the treble range can be made due to separation
of the tweeter and woofer.
FINE TWEETER
CONTROL
BLFS
SC-HD510
Turn [FINE TWEETER CONTROL].
Turn towards MAX to emphasize the treble or towards MIN to
lessen the effect.
Note
The effect is not noticeable through headphones.
B
Adjusting the bass-BLFS
SC-HD510 only
Use this feature to emphasize the bass (HIGH or LOW), or weaken
it (LIGHT).
FINE TWEETER CONTROL
A
B
C
Press [BLFS].
Each time you press the button:
BLFS HIGH
BLFS LOW
FLAT
BLFS LIGHT
MIN
MAX
BLFS
To cancel
Press [BLFS] to select “FLAT.”
BLFS
C
To adjust the tone quality
SC-HD310 only
BASS
TREBLE
SC-HD310
The level can be adjusted between -3 to +3.
Press [BASS] (low-frequency sound) or
[TREBLE] (high-frequency sound).
Each time you press the button;
+1
+2
+3
-3
-2
-1
0
To cancel
Press [BASS] or [TREBLE] to select “BASS 0” or “TREBLE 0”.
(“FLAT” will light.)
BASS
D
Muting the volume
Remote control only
Press [MUTING].
Volume is reduced to minimum.
TREBLE
To cancel
Press [MUTING] again. (“MUTING OFF” lights up.)
To cancel from the unit, turn [VOLUME] to minimum (- - dB), then
raise it to the required level.
Muting is also canceled when the unit is turned off.
Rrfnce
MONO
EXT/MD TUNER
TUNE
MD
D
CD
TAPE
Maintenance
MUTING
TUNE
MUTING
VOLUME
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-
and-water solution or a weak detergent solution.
●
Never use alcohol, paint thinner or benzine to clean this unit.
●
Before using chemically impregnated cloth, read the instructions
that came with the cloth carefully.
MUTING
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and
recording. Use a cleaning tape (not included).
26
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to
the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as black circled numbers y.
Common Problems
No sound.
Turn the volume up.
The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the
unit on. y
Sounds unfixed, reversed or
come from one speaker only
Check the speaker connections. y
Humming heard during play
An AC mains lead or fluorescent light is near the cables. Keep other appliances and leads away from
this unit’s cables.
If possible in your area, turn the AC mains lead’s plug or connector over to reverse the lead’s
polarity.
“ERROR” is displayed.
“U70” is displayed
“F61” is displayed.
Incorrect operation performed. Read the instructions and try again.
Connect the flat cables firmly. If “U70” remains on the display, contact the dealer.
There is a problem with the amplifier. Consult your dealer.
Turn DEMO off. !
ECO mode on but display still
lights up in standby mode.
Listening to the radio
Noise is heard.
Use an outdoor antenna. i
The stereo indicator flickers or
doesn’t light.
Sound is distorted.
A beat sound is heard.
Turn the TV off or separate it from the unit.
A low hum is heard during AM Separate the antenna from other cables and leads.
broadcasts.
The correct AM frequency can’t Change the frequency step. Hold [FM/AM] or [AM] down for 10 seconds to change the step to 9 kHz.
be tuned in.
The cassette deck
Poor quality sound.
Recording is not possible.
The CD player
Clean the heads. @
Check the Dolby NR setting. !
If the erasure prevention tabs have been removed, cover the holes with adhesive tape. !
The display is wrong or play
won’t start.
The disc may be upside down. !
Wipe the disc.
Replace the disc if it is scratched, warped, or nonstandard. !
Condensation may have formed in the player due to a sudden change in temperature. Wait about an
hour for it to clear and try again.
During “One touch” editing ( Page 21)
a
“NO TAPE” is displayed.
Load a cassette. !
“CHANGE TAPE” is displayed.
If the erasure prevention tabs have been removed, cover the holes with adhesive tape. !
Rfrnce
The remote control
The remote control doesn’t work.
Check the batteries are inserted correctly. t
Replace the batteries if they are worn.
All components are required to service the system. If service is ever necessary, bring the entire system.
27
RQT5296
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical specifications (DIN 45 500)
TUNER
SC-HD310
SC-HD510
SPEAKER SYSTEM
Type 2 way, 2 speaker, bass-reflex system
Speaker(s)
AMPLIFIER
■ Pre-amplifier section
Input sensitivity/impedance
EXT/MD IN
Output level/impedance
EXT/MD OUT
■ Amplifier section
Power output
300 mV/15 kΩ
DIN 1 kHz, THD 1%, 6 Ω both
channel driven
RMS 1 kHz, THD 10%, 6 Ω both
channel driven
Total harmonic distortion
Half power, 1 kHz, 6 Ω
Frequency response
50 Hz–20 kHz (+1 dB, –3 dB)
75 dB
Load impedance
■ Headphones
Jack type
Load impedance
■ General
Power supply
For United Kingdom
Woofer:
Tweeter:
Impedance
Input power
High
12 cm cone type
6 cm semi-dome type
6 Ω
2×17 W
2×20 W
0.09 %
250 mV/1.5 kΩ
■ Tuner section
FM frequency range
87.50–108.00 MHz
(0.05 MHz step)
75 Ω unbalance
30 W (Music), 15 W (DIN)
60 W (Music), 30 W (DIN)
LOW
FM antenna terminal
AM frequency range
Output sound pressure level
85 dB/W (1.0 m)
Cross over frequency 5 kHz
522–1629 kHz (9 kHz step)
520–1630 kHz (10 kHz step)
S/N
6 Ω
Frequency range
43 Hz–50 kHz (–16 dB)
50 Hz–45 kHz (–10 dB)
■ Timer section
Clock
Function
Quartz lock type
Play timer: 1 time or everyday
Rec timer: 1 time or everyday
3.5 mm STEREO
■ General
Dimensions (W×H×D)
For Australia and N.Z.
16–32 Ω
Sleep timer: 120 min, 30 min intervals
■ GENERAL
Dimensions (W×H×D)
155×334×240 mm
For others
Weight
155×334×252 mm
AC 230–240 V, 50 Hz
AC 230 V, 50 Hz
67 W
196×76.8×250 mm
For others
Power consumption
STANDBY condition
Normal
For Australia and N.Z.
For others
3.1 kg
3.5 kg
Weight
1.0 kg
SC-HD510
AMPLIFIER
9 W
■ Amplifier section
(Low frequency side)
Power output
DIN 1 kHz, THD 1%, 6 Ω both
channel driven
RMS 1 kHz, THD 10%, 6 Ω both
channel driven
Total harmonic distortion
Half power, 1 kHz, 6 Ω
S/N
SC-HD310
Eco
0.8 W
SPEAKER SYSTEM
Dimensions (W×H×D)
196×105.8×259.9 mm
Weight
Type 2 way, 2 speaker, bass-reflex system
Speaker(s)
Woofer:
Tweeter:
Impedance
Input power
2.8 kg
12 cm cone type
6 cm cone type
2×12 W
CD PLAYER
6 Ω
2×15 W
Digital output terminal
■ Audio section
DA converter
■ Format
Sampling frequency
■ Pickup
Wavelength
■ General
Dimensions (W×H×D)
Optical×1
1 bit 2 DAC MASH
44.1 kHz
60 W (Music), 30 W (DIN)
Output sound pressure level
85 dB/W (1.0 m)
6 kHz
0.09%
75 dB
6 Ω
Cross over frequency
Frequency range
Load impedance
45 Hz–25 kHz (–16 dB)
55 Hz–22 kHz (–10 dB)
■ Amplifier section
(High frequency side)
Power output
DIN 10 kHz, THD 1%, 6 Ω both
channel driven
RMS 10 kHz, THD 10%, 6 Ω both
channel driven
S/N
Load impedance
■ Headphones
Jack type
Load impedance
■ General
780 nm
■ General
Dimensions (W×H×D)
160×319×217 mm
2×5 W
196×76.8×243.1 mm
Weight
3.0 kg
Weight
1.2 kg
2×8 W
75 dB
6 Ω
Notes:
1. Specifications are subject to change
without notice.
Weight and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
CASSETTE DECK
■ Audio section
Track system
Frequency response (Dolby NR off)
(Rec/Play)
TYPE 1 (NORMAL) 30 Hz–16 kHz (DIN)
TYPE 2 (HIGH)
TYPE 4 (METAL)
S/N (Signal level=max recording level,
TYPE 2)
NR off
Dolby B NR
■ Motor
Capstan drive
Reel table drive
4 track 2 channel STEREO
3.5 mm STEREO
16–32 Ω
Power supply
For United Kingdom, Australia and N.Z.
30 Hz–16 kHz (DIN)
30 Hz–16 kHz (DIN)
AC 230–240 V, 50 Hz
For others
AC 230 V, 50 Hz
73 W
Power consumption
STANDBY condition
Normal
56 dB (A weighted)
64 dB (A weighted)
9 W
0.8 W
Eco
DC servo motor
DC motor
Dimensions (W×H×D)
196×105.8×259.9 mm
Fast forward and rewind time (C-60)
Approx. 52 seconds
0.1% (WRMS)
Weight
3.3 kg
Wow and flutter
■ General
Dimensions (W×H×D)
196×105.8×236.1 mm
Weight
1.5 kg
En
Matsushita Electric Industrial Co., Ltd.
Osaka 542-8588, Japan
RQT5296-B
H1299YY0(D)
Download from Www.Somanuals.com. All Manuals Search And Download.
|