Sanyo Car Video System CE42LH2DPB User Guide

INSTRUCTION MANUAL

LCD Monitor

CE42LH2R

CE42LH2DPB

CE42LH2WP

Please read this Instruction book before using your LCD monitor.

We wish you many hours of pleasure from your new LCD monitor.

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY PRECAUTIONS

CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but

LPSURSHUꢀXVHꢀFDQꢀUHVXOWꢀLQꢀSRWHQWLDOꢀHOHFWULFꢀVKRFNꢀRUꢀ¿UHꢀKD]DUGVꢆꢀ,QꢀRUGHUꢀQRWꢀWRꢀGHIHDWꢀWKHꢀVDIHJXDUGVꢀLQFRUSRUDWHGꢀLQꢀWKLVꢀPRQLWRUꢀREVHUYHꢀWKHꢀ

following basic rules for its installation, use and servicing.

Installation and Use

(CE42LH2WP model only)

The operating temperature range of this monitor is guaranteed 0°C

Do not allow anything to rest on the power

~ 40°C/32°F ~ 104°F. It is not recommended to install the screen

cord. Do not locate this LCD monitor where the

in direct sunlight without adequate shading, as this will cause the

FRUGꢀZLOOꢀEHꢀGDPDJHGꢀE\ꢀSHRSOHꢀZDONLQJꢀRQꢀLWꢆ

WHPSHUDWXUHꢀRIꢀWKHꢀSDQHOꢀWRꢀULVHꢀDERYHꢀWKHꢀPD[LPXPꢀVSHFL¿HGꢆꢀ'R-

LQJꢀVRꢀPD\ꢀFDXVHꢀDꢀEODFNꢀVKDGRZꢀWRꢀDSSHDUꢀRQꢀWKHꢀVFUHHQꢀZKLFKꢀ

will disappear when the screen temperature returns to within the

VSHFL¿FDWLRQꢆꢀ7KLVꢀ³RIꢀFRXUVH´ꢀGRHVꢀQRWꢀSURGXFHꢀDQ\ꢀKDUPIXOꢀHIIHFWꢀ

on the lifetime of the monitor.

Do not overload wall outlets and extension

FRUGVꢀDVꢀWKLVꢀFDQꢀUHVXOWꢀLQꢀ¿UHꢀRUꢀHOHFWULFꢀVKRFNꢆ

$ꢀVXLWDEOHꢀVRFNHWꢀRXWOHWꢀPXVWꢀEHꢀSURYLGHGꢀQHDUꢀ

to the monitor and shall be easily accessible.

Do not place this LCD monitor near any heat

sources such as radiators, heaters, stoves and other heat-generating

SURGXFWVꢀꢁLQFOXGLQJꢀDPSOL¿HUVꢅꢆꢀ

Do not apply liquid cleaners or aerosol cleaners directly onto the LCD

monitor. Use a damp cloth for cleaning.

Do not place your LCD monitor on an unstable stand, shelf or table.

Serious injury to an individual, and damage to the LCD monitor may

result if it should fall. Your sales person can recommend an approved

ZDOOꢀPRXQWLQJꢀNLWꢆꢀ$ꢀVSHFLDOꢀZDOOꢀPRXQWLQJꢀNLWꢀLVꢀDYDLODEOHꢀIRUꢀWKLVꢀ

model.

ADDITIONAL FOR NORTH AMERICA AND CANADA:

This monitor must NOT be permanently mounted to the building

structure. It must be mounted in such a way that it can be removed

using basic tools.

The power supply cord must NOT be attached to the building surface.

The power supply cord must NOT be routed through walls, ceiling,

ÀRRUVꢇꢀRUꢀRWKHUꢀVLPLODUꢀRSHQLQJVꢀLQꢀWKHꢀEXLOGLQJꢀVWUXFWXUHꢆꢀ

The power supply cord MUST be positioned so as to prevent physical

damage.

This LCD monitor should be operated only from the type of power

source indicated on the monitor or as indicated in the Operating In-

structions. If you are not sure of the type of power supply, consult your

sales person or your local power company.

For added protection it is strongly recommended that this LCD

monitor has its mains supplied via an approved earth fault protection

device.

Important: (UK only)

THIS PRODUCT MUST BE EARTHED.

7KLVꢀHTXLSPHQWꢀLVꢀ¿WWHGꢀZLWKꢀDQꢀDSSURYHGꢀPDLQVꢀOHDGꢀDQGꢀDQꢀ

approved non rewireable UK mains plug. To change a fuse in this

type of plug proceed as follows:

WARNING: To prevent injury the LCD monitor must be securely

attached to the wall in accordance with the manufacturers installation

instructions.

1. Remove the fuse cover and fuse.

IMPORTANT:

2. Fit a new fuse which should be a BS1362 13 Amp A.S.T.A. or

BSI approved type.

This product must be earthed.

This unit is not disconnected from the mains unless the mains lead

LVꢀXQSOXJJHGꢆꢀ7KHꢀLQVWDOOHUꢀPXVWꢀPDNHꢀVXUHꢀWKDWꢀWKHꢀZDWHUSURRIꢀLQOLQHꢀ

coupler is easily accessible.

3.ꢀ(QVXUHꢀWKDWꢀWKHꢀIXVHꢀFRYHUꢀLVꢀFRUUHFWO\ꢀUH¿WWHGꢆ

If the fuse cover is lost or damaged the plug must NOT be used

but replaced with a serviceable plug.

(CE42LH2WP model only)

,IꢀWKHꢀ¿WWHGꢀSOXJꢀLVꢀQRWꢀVXLWDEOHꢀIRUꢀ\RXUꢀVRFNHWꢀRXWOHWVꢇꢀLWꢀVKRXOGꢀEHꢀ

FXWꢀRIIꢀDQGꢀDQꢀDSSURSULDWHꢀSOXJꢀ¿WWHGꢀLQꢀLWVꢀSODFHꢆꢀ,IꢀWKHꢀPDLQVꢀSOXJꢀ

contains a fuse, this should have a rating of 13 Amp, ensure the

IXVHꢀFRYHUꢀLVꢀFRUUHFWO\ꢀ¿WWHGꢆꢀ,IꢀDꢀSOXJꢀZLWKRXWꢀDꢀIXVHꢀLVꢀXVHGꢇꢀWKHꢀ

fuse at the distribution board should not be greater than 13 Amp.

This monitor is tested to IP66 standard rating.

This monitor is not protected against temporary or continuous

immersion in liquid.

Do not use immediately after moving the LCD monitor from a low

temperature to a high temperature environment, as this causes con-

GHQVDWLRQꢇꢀZKLFKꢀPD\ꢀUHVXOWꢀLQꢀ¿UHꢇꢀHOHFWULFꢀVKRFNꢇꢀRUꢀRWKHUꢀKD]DUGVꢆꢀ

%HIRUHꢀFOHDQLQJꢇꢀXQSOXJꢀWKHꢀPRQLWRUꢀIURPꢀWKHꢀZDOOꢀVRFNHWꢆꢀ

Note: The severed plug must be destroyed to avoid a possible

VKRFNꢀKD]DUGꢀVKRXOGꢀLWꢀEHꢀLQVHUWHGꢀLQWRꢀDꢀꢃꢈꢀ$PSꢀVRFNHWꢀHOVH-

where.

The wires in this mains lead are coloured in accordance with the

following code:

Do notꢀPRXQWꢀQHDUꢀDQꢀRSHQꢀÀDPHꢀVRXUFHꢆꢀ2SHQꢀÀDPHVꢀPXVWꢀQHYHUꢀ

be used near this LCD monitor.

Blue

Brown

Neutral

Live

This LCD monitor should not be built in or enclosed in any way, heat

build up will reduce the life of the monitor.

Green and Yellow

Earth

This LCD monitor should have a minimum distance of 5cm away from

the wall and the monitor should have 10cm distance around the top

and sides.

1. The Blue wire must be connected to the terminal which is

PDUNHGꢀZLWKꢀWKHꢀOHWWHUꢀ³1´ꢀRUꢀFRORXUHGꢀ%/$&.ꢆ

2. The Brown wire must be connected to the terminal with the

AlwaysꢀPRXQWꢀXVLQJꢀUHFRPPHQGHGꢀDQGꢀVXEVWDQWLDOꢀ¿[WXUHVꢀDQGꢀ¿W-

letter “L” or coloured RED.

tings.

3. The Green and Yellow wire must be connected to the terminal

ZKLFKꢀLVꢀPDUNHGꢀZLWKꢀWKHꢀOHWWHUꢀ³(´ꢀRUꢀFRORXUHGꢀ*5((1ꢀRUꢀ

GREEN and YELLOW.

10cm

%HIRUHꢀUHSODFLQJꢀWKHꢀSOXJꢀFRYHUꢇꢀPDNHꢀFHUWDLQꢀWKDWꢀWKHꢀFRUGꢀJULSꢀLVꢀ

clamped over the sheath of the lead - not simply over the wires.

5cm

10cm

Do not attempt to bypass the safety purpose of the grounding

type plug.

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UN-

LESS THE MAINS LEAD IS UNPLUGGED.

7KHꢀUHDUꢀ¿QQHGꢀVHFWLRQꢀDURXQGꢀWKHꢀFDELQHWꢀIXQFWLRQVꢀDVꢀDꢀKHDWꢀVLQNꢇꢀ

removing heat away from the monitor. The external surface of the

FDELQHWꢀꢁ¿QQHGꢀDUHDꢅꢀPXVWꢀQRWꢀEHꢀFRYHUHGꢀRUꢀWKHꢀDLUÀRZꢀUHVWULFWHGꢀLQꢀ

anyway by enclosing the LCD monitor.

THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS

EASILY ACCESSIBLE.

Download from Www.Somanuals.com. All Manuals Search And Download.

SERVICING

Servicing

Your monitor is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage

objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively

use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original

VSDUHꢀSDUWVꢀFDQꢀSUHYHQWꢀ¿UHꢁꢀVKRFNꢀDQGꢀRWKHUꢀKD]DUGVꢂ

8QSOXJꢀWKHꢀ/&'ꢀPRQLWRUꢀIURPꢀWKHꢀZDOOꢀRXWOHWꢀDQGꢀUHIHUꢀVHUYLFLQJꢀWRꢀTXDOL¿HGꢀVHUYLFHꢀSHUVRQQHOꢀXQGHUꢀWKHꢀIROORZLQJꢀ

conditions:

N If the power cord or plug is damaged.

N If liquid has been spilt in to the LCD monitor.

N If the LCD monitor has been dropped or the cabinet has been damaged.

N If the LCD monitor exhibits a distinct change in performance.

N If the LCD monitor does not operate normally by following the operating instructions.

N If the LCD monitor has been exposed to rain or water. (CE42LH2R/CE42LH2DPB model only)

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage.

7KLVꢀZLOOꢀRIWHQꢀUHTXLUHꢀH[WHQVLYHꢀZRUNꢀE\ꢀDꢀTXDOL¿HGꢀWHFKQLFLDQꢀWRꢀUHVWRUHꢀWKHꢀPRQLWRUꢀWRꢀQRUPDOꢀRSHUDWLRQꢆ

Important recycling information.

Your SANYO product is designed and manufactured with high quality materials and components

which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be dis-

posed of separately.

In the European Union there are separate collection systems for used electrical and electronic

products.

Please help us to conserve the environment we live in!

Note:ꢀꢀ7KLVꢀV\PEROꢀPDUNꢀDQGꢀUHF\FOHꢀV\VWHPꢀDUHꢀDSSOLHGꢀRQO\ꢀWRꢀ(8ꢀFRXQWULHVꢀDUHꢀQRWꢀDSSOLHGꢀWRꢀ

other countries of the world.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,

PD\ꢀFDXVHꢀKDUPIXOꢀLQWHUIHUHQFHꢀWRꢀUDGLRꢀFRPPXQLFDWLRQVꢆꢀ2SHUDWLRQꢀRIꢀWKLVꢀHTXLSPHQWꢀLQꢀDꢀUHVLGHQWLDOꢀDUHDꢀLVꢀOLNHO\ꢀWRꢀFDXVHꢀKDUPIXOꢀLQWHUIHU-

ence in which case the user will be required to correct the interference at his own expense.

'RꢀQRWꢀPDNHꢀDQ\ꢀFKDQJHVꢀRUꢀPRGL¿FDWLRQVꢀWRꢀWKHꢀHTXLSPHQWꢀXQOHVVꢀRWKHUZLVHꢀVSHFL¿HGꢀLQꢀWKHꢀLQVWUXFWLRQVꢆꢀ,IꢀVXFKꢀFKDQJHVꢀRUꢀPRGL¿FDWLRQVꢀ

should be made, you could be required to stop operation of the equipment.

Canadian Radio Interference Regulations

This Class A digital apparatus meets all requirements of the Canadian ICES-003.

WARNING

7KLVꢀLVꢀDꢀ&ODVVꢀ$ꢀSURGXFWꢆꢀ,QꢀDꢀGRPHVWLFꢀHQYLURQPHQWꢀWKLVꢀSURGXFWꢀPD\ꢀFDXVHꢀUDGLRꢀLQWHUIHUHQFHꢀLQꢀZKLFKꢀFDVHꢀWKHꢀXVHUꢀPD\ꢀEHꢀUHTXLUHGꢀWRꢀWDNHꢀ

adequate measures.

Download from Www.Somanuals.com. All Manuals Search And Download.

SERVICING

AC Power Cord Requirement

The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you

purchase it.

AC Power Cord for the United States and Canada:

GROUND

$&ꢀ3RZHUꢀ&RUGꢀXVHGꢀLQꢀWKHꢀ8QLWHGꢀ6WDWHVꢀDQGꢀ&DQDGDꢀLVꢀOLVWHGꢀE\ꢀWKHꢀ8QGHUZULWHUVꢀ/DERUDWRULHVꢀꢁ8/ꢅꢀDQGꢀFHUWL¿HGꢀ

by the Canadian Standard Association (CSA).

$&ꢀ3RZHUꢀ&RUGꢀKDVꢀDꢀJURXQGLQJꢂW\SHꢀ$&ꢀOLQHꢀSOXJꢆꢀ7KLVꢀLVꢀDꢀVDIHW\ꢀIHDWXUHꢀWRꢀPDNHꢀVXUHꢀWKDWꢀWKHꢀSOXJꢀZLOOꢀ¿WꢀLQWRꢀWKHꢀSRZHUꢀRXWOHWꢆꢀ

Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE

End-User License

The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utili-

ties and modules embedded within the Product) which is owned by Sanyo or its licensors. Before using the product, please read the End-User

License Conditions detailed below. If you do not agree to the terms and conditions of the End-User License, Please do not proceed to use the

3URGXFWꢂꢀUHSDFNꢀWKHꢀ3URGXFWꢀXQXVHGꢀDQGꢀUHWXUQꢀLWꢀWRꢀ\RXUꢀVXSSOLHUꢀWRJHWKHUꢀZLWKꢀSURRIꢀRIꢀSXUFKDVHꢀIRUꢀDꢀIXOOꢀUHIXQGꢆꢀ%\ꢀXVLQJꢀWKHꢀSURGXFWꢇꢀ\RXꢀ

agree to be bound by the terms and conditions of the End-User License.

/LFHQVHꢀ*UDQWꢁꢀ&RQGLWLRQVꢀDQGꢀUHVWULFWLRQV

1. Sanyo grants you a non-exclusive, world-wide (subject to export controls), non-transferable (except as permitted by 2 below), royalty-free

license to use the Software upon and with the Product.

2. You may not transfer any of your license rights in the Software without the prior written consent of SANYO and if consent is provided then

the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed

to accept the terms and conditions of this license.

3.ꢀꢀ<RXꢀPXVWꢀHQVXUHꢀWKDWꢀWKHꢀFRS\ULJKWꢇꢀWUDGHPDUNꢀDQGꢀRWKHUꢀSURWHFWLYHꢀQRWLFHVꢀFRQWDLQHGꢀLQꢀWKHꢀ6RIWZDUHꢀDUHꢀPDLQWDLQHGꢀDQGꢀQRWꢀDOWHUHGꢀRUꢀ

removed.

4. The Software provided hereunder is copyrighted and licensed (not sold). SANYO especially does not transfer title or and ownership rights

in the Software to you. The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under

license by a third party supplier.

5. Except as expressly permitted by statute you may not;

L use the Software in conjunction with any other computer hardware other than the product;

L copy all or part of the Software;

L incorporate all (or any of) the Software into other programs developed by (or on behalf of) you and/or used by you;

L reverse-engineer, decompile or disassemble the Software;

L PDNHꢀWKHꢀ6RIWZDUHꢀꢁRUꢀDQ\ꢀSDUWꢀRIꢀLWꢅꢀDYDLODEOHꢇꢀRUꢀSHUPLWꢀLWVꢀUHGLVWULEXWLRQꢇꢀIRUꢀXVHꢀZLWKꢀDQ\ꢀFRPSXWHUꢀKDUGZDUHꢀRWKHUꢀWKDQꢀWKHꢀ3URGXFWꢉꢀRUꢀꢀꢀꢀꢀꢀ

rent, lease, gift, loan, sell, distribute or transfer possession of the whole or any part of the Software.

Termination

This license is effective until terminated. This license will terminate automatically without notice if you fail to comply with any of its provisions.

Disclaimer

1. The Software is(to the extent permitted by law) supplied “as is” and SANYO and its suppliers expressly exclude all warranties, express or

LPSOLHGꢇꢀLQFOXGLQJꢀꢁEXWꢀQRWꢀOLPLWHGꢀWRꢅꢀZDUUDQWLHVꢀRIꢀVDWLVIDFWRU\ꢀTXDOLW\ꢇꢀ¿WQHVVꢀIRUꢀSXUSRVHꢀDQGꢀQRQꢂLQIULQJHPHQWꢀꢁVDYHꢀWRꢀWKHꢀH[WHQWꢀWKDWꢀWKHꢀ

same are not capable of exclusion at law).

2.ꢀꢀ,QꢀQRꢀFLUFXPVWDQFHVꢀZLOOꢀ6$1<2ꢀEHꢀOLDEOHꢀIRUꢀDQ\ꢀGLUHFWꢇꢀLQGLUHFWꢇꢀFRQVHTXHQWLDOꢇꢀRUꢀLQFLGHQWDOꢀGDPDJHꢀꢁLQFOXGLQJꢀORVVꢀRIꢀSUR¿WVꢇꢀEXVLQHVVꢀ

interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inability to use

the Software (save to the extent that such liability is not capable of exclusion at law).

General

1. This End-User License will be governed by laws of England and the User may only bring claims in the English Courts and SANYO shall be

entitled to bring a claim in the courts of any jurisdiction.

2. This End-User License is governed by the laws of the State of California. The End-User and Sanyo agree that any action to enforce or inter-

pret the terms of this End-User License shall be brought only in the appropriate state or federal court located in Los Angeles County, Califor-

nia.The End-User and Sanyo hereby submit to the exclusive jurisdiction and venue of such court.

3. The above terms and conditions supersede any prior agreement, oral or written, between you and SANYO relating to the Software.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Step: 1 Mains Connection

Nꢀꢀ&RQQHFWꢀWKHꢀGLVSOD\ꢀXQLWꢀWRꢀ9*$ꢁꢀ%1&ꢀDQGꢀ6FDUWꢀFRQ-

nector as required.

LD-Net

ꢍꢀ7KLVꢀ¿JXUHꢀLVꢀ&(ꢎꢊ/+ꢊ:3ꢆ

4. AV3

Composite (CVBS) signal input.

1. Connect the in-line power connector to the Mains Inlet as shown

above.

AV3-OUT can be used to output the incoming AV3 signal to the

other monitor.

2. Connect the power cord of the LCD monitor to a suitable wall outlet.

ꢀ As this product does not have a mains On/Off switch, please

ensure your mains plug is easily accessible.

5. DVI-D (Digital Video Interface)

DVI-D supports a large range of resolutions as shown on page 17.

ꢀ The LCD monitor is prepared for a mains voltage AC100 ~ 240V,

50Hz/60Hz. To completely switch off the mains, or when the

display unit is not to be used for an extended period of time, it is

advisable to disconnect the power cord from the power outlet.

6. PC connection

PC input (PC-IN D-SUB). This input supports a large range of reso-

lutions as shown page 17. Audio can be connected via the 3.5mm

PC-AUDIO IN.

ains

7. External Speaker

Output the audio signal from AV1, AV2, AV3, PC and DVI.

7KHꢀVSHDNHUꢀLPSHGDQFHꢀLVꢀꢌꢀRKPVꢆ

ꢀ Please use the correct mains lead supplied with the set for your

area.

3. Warning: To prevent injury, the unit must be securely attached to

the wall in accordance with the installation instructions.

WARNING! High voltages are used in the

RSHUDWLRQꢀRIꢀWKLVꢀVHWꢆꢀ5HIHUꢀVHUYLFHꢀWRꢀTXDOL¿HGꢀ

service personnel.

8. AV2 / DVI AUDIO IN

Connect the audio output (stereo) from a computer or video equip-

ment connected AV2 or DVI.

Step: 2 Connections

N INPUT selection

7RꢀVZLWFKꢀHLWKHUꢀ$9ꢃꢇꢀ5*%ꢇꢀ$9ꢊꢇꢀ$9ꢈꢇꢀ3&ꢇꢀ'9,ꢀRUꢀ1HWZRUNꢀE\ꢀSUHVV-

ing the INPUT button on your remote control repeatedly.

1. AV1

SCART connection/CVBS/RGB/S-VIDEO.

2. RGB

9. Monitor Audio OUT

7KLVꢀWHUPLQDOVꢀRXWSXWꢀ¿[HGꢀOHYHOꢀIURPꢀ$8',2ꢀ,1ꢆ

TTL input (5V RGB signals) into SCART terminal.

ꢃꢂꢀ<ꢁꢀ3Eꢁꢀ3Uꢄ5*%+9ꢀFRQQHFWLRQꢀꢅ$9ꢆꢇ

10. RS232C IN/OUT

Choose Y, Pb, Pr or RGB H/V connection by selecting AV2 Setting

in Set up menu (see page 10). You can connect your DVD player

to the Y, Pb, Pr terminals instead of using a scart lead. This can

VXSSRUWꢀKLJKꢀGH¿QLWLRQꢀLQꢀDQDORJXHꢀFRPSRQHQWꢀIRUPꢆꢀ5*%ꢀ+ꢋ9ꢀFDQꢀ

be used as a PC input via the BNC terminals. Both options support

a large range of resolutions (page 17). AV2-OUT can be used to

output the incoming AV2 signal to the other monitor.

ꢀꢀꢀ:KHQꢀWKHꢀPRQLWRUꢀLVꢀFRQWUROOHGꢀE\ꢀDꢀFRPSXWHUꢇꢀFRQQHFWꢀWRꢀWKLVꢀMDFNꢀ

with serial control cable.

You can connect to another monitor with RS232C OUT.

:KHQꢀ\RXꢀFRQQHFWꢀ3&ꢀZLWKꢀ56ꢊꢈꢊ&ꢇꢀVHOHFWꢀ³21´ꢀDWꢀ1HWZRUNꢀ

standby in Installation mode.

If it is selected “OFF”, RS232C terminals do not functional. Also

select push button to “SERIAL PORT”.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Remote control

Standby

Input

To switch the monitor on and off. Also see page 8.

To switch input source from AV1, RGB, AV2, AV3,

PC, DVI or Network mode.

Recall

To display input selection information and the Time

set.

You can also select colour systems in AV1/AV3

mode as follows: AUTO í PAL í SECAM í

NTSC í NTSC4.43 í PAL M í PAL N.

Wide

To select the screen mode Full, Full All, Zoom

16:9, Title in 16:9, Zoom 14:9, Title in 14:9,

Normal or Natural wide.

Refer to page 12.

Auto PC

It can also be automatically adjusted in PC mode

by pressing this button for twice .

To enter and exit the main menu, and sub menu.

Back

Used to return to the previous menu.

Up and Down

To select the next or previous item.

Level Up/Down

To adjust the sound volume level or enter sub

menus.

F/OK

Sound Mute

7RꢀFRQ¿UPꢀWKHꢀLQLWLDOꢀVHWWLQJꢀLQꢀWKHꢀPHQXꢆ

7RꢀPXWHꢀWKHꢀVRXQGꢀIURPꢀWKHꢀVSHDNHUVꢆ

The sound changes as follows: Normal volume

Mute.

Picture mode selector

Press the ꢀ button repeatedly to select the fol-

lowing picture mode.

Personal - Personal preference mode.

Standard - Normal viewing mode.

Dynamic - Suitable for brightly lit rooms.

Soft - Low contrast setting

Bass Expander

To get an emphasised bass sound ON or OFF.

TXT/TV

To select Teletext mode.

Eco - Suitable for dimly lit rooms and gives a cin-

HPDꢂOLNHꢀHIIHFWꢆ

Main/Sub Picture Swap

To swap Main and Sub picture.

)UHH]H

To switch picture still on or off.

ON/OFF

To switch OFF í PIP(1) í PIP(2) í POP mode

Green

in turn.

Press this button for more than 5 seconds, installa-

tion mode will appear.

Refer to page 13.

FOR EU USERS

Remote control battery installation

7KHꢀV\PEROꢀPDUNꢀDQGꢀUHF\FOLQJꢀV\VWHPVꢀGHVFULEHGꢀEHORZꢀDSSO\ꢀWRꢀ(8ꢀ

countries and do not apply to countries in other areas of the world.

Your SANYO product is designed and manufactured with high quality

materials and components which can be recycled and/or reused.

7KHꢀV\PEROꢀPDUNꢀPHDQVꢀWKDWꢀHOHFWULFDOꢀDQGꢀHOHFWURQLFꢀHTXLSPHQWꢇꢀ

batteries and accumulators, at their end-of-life, should be disposed of

separately from your household waste.

Note:

,IꢀDꢀFKHPLFDOꢀV\PEROꢀLVꢀSULQWHGꢀEHQHDWKꢀWKHꢀV\PEROꢀPDUNꢇꢀWKLVꢀFKHPL-

cal symbol means that the battery or accumulator contains a heavy

metal at a certain concentration. This will be indicated as follows: Hg:

mercury, Cd: cadmium, Pb: lead

In the European Union there are separate collection systems for used

electrical and electronic equipment, batteries and accumulators.

Please, dispose of them correctly at your local community waste col-

lection/recycling centre.

Please, help us to conserve the environment we live in!

,QVWDOOꢀWZRꢀ³$$´ꢀꢃꢆꢄꢀYROWꢀEDWWHULHVꢀVRꢀWKDWꢀWKHꢀ³ꢏ´ꢀDQGꢀ³±´ꢀPDUNVꢀRQꢀWKHꢀ

EDWWHULHVꢀPDWFKꢀWKHꢀ³ꢏ´ꢀDQGꢀ³±´ꢀPDUNVꢀLQVLGHꢀWKHꢀXQLWꢀLQWRꢀWKHꢀUHPRWHꢀ

control handset.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Controls and Menus

Menu Operation

Many of your monitors functions are controlled through the menu

function, using the remote control.

Picture

Brightness

Contrast

Color

Tint (only if NTSC equipment is detected)

Sharpness

White Tone

White Tone / R / G / B

Advanced Setting

DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode

Sound

Time

Treble

Bass

Balance

On / Off

Bass Expander

Current Weekday

Current Time

Schedule

Weekday

Time

1 - 20

Action

Power On / Power Off

On Program

AV1 / RGB / AV2 / AV3 / PC / DVI / Network

On / Off

Active

Setup Menu Setup

Language / H/V-Position / Duration / Transparence

PIP / POP Setup

PIP/POP Mode / Main/Sub Source / PIP Position

Initial Settings

Text Language

Tile Mode

Western / Eastern / Russian / Arabic / Farsi

Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment

AV2 Setting

XGA Mode

RGBHV / YPbPr

XGA / WXGA 1366x768

On / Off

PC Power save

PC Adj. Auto Adjust

H-Position

V-Position

Clock

The LCD display has a Standby light to show there is power.

Phase

Switching into/from standby mode

During menu operation the bottom of the on screen display will show

which controls can be used for menu navigation.

Press the MENU button to enter the main menu. Whenever main

menu is accessed initially, PICTURE will be the default selection.

The Standby mode is used for switching the LCD monitor off for short

periods of time. In standby mode the monitor is switched off but is still

receiving mains power.

L To turn the monitor into standby mode, press the ꢁ button.

The blue power indicator illuminates more brightly.

A sub menu is selected using the ꢄ or ꢅ button and pressing

the ꢂ or ꢃ button when the required sub menu is highlighted.

:KHQꢀ\RXꢀKDYHꢀ¿QLVKHGꢀ\RXꢀFDQꢀSUHVVꢀWKHꢀBACK button to return to

the previous menu, press the MENU button to exit the menu operation.

L To turn the monitor ON from standby mode, press the ꢁ button

again.

,Iꢀ\RXꢀ¿QGꢀWKHꢀSRZHUꢀLQGLFDWRUꢀÀDVKLQJꢇꢀGLVFRQQHFWꢀ

power cord from the power outlet and contact our

6HUYLFHꢀGHVNꢆ

7KLVꢀZDUQLQJꢀLVꢀDꢀVLJQꢀWRꢀOHWꢀ\RXꢀNQRZꢀWKDWꢀWKHꢀ

power protection function of this TV set is now

operating.

Picture menu

1. Press the MENU button. PICTURE will be the default selection.

Press the ꢂ or ꢃ button to enter.

Set the picture settings for your “personal” preference.

Control buttons (bottom corner of back cover)

Menu button: Used to display or cancel main menu.

Input/4 button: Switch between AV1, RGB, AV2, AV3, PC , DVI

RUꢀ1HWZRUNꢀPRGHꢆꢀ,WꢀLVꢀDOVRꢀXVHGꢀWRꢀSURYLGHꢀVXEꢀ

menu selection from the Main Menu.

2. Use the ꢄ or ꢅ button to select eg. Brightness and the ꢂ or

ꢃ button to adjust levels.

ꢂ or ꢃ buttons: provide up and down adjustments.

N White Tone

May be used to adjust the color tone of the picture. Use the ꢄ or

ꢅ button to select White Tone and press the ꢂ or ꢃ button

to enter the sub menu. You can select Personal, Cool, Standard or

Warm settings by using the ꢂ or ꢃ button. To adjust the color

tone of the picture by using the ꢄ or ꢅ button to select Red(R),

Green(G) or Blue(B) and the ꢂ or ꢃ button to adjust levels.

These settings will be stored in personal mode automatically.

ꢁ button: To switch to standby mode (to switch off completely

disconnect the monitor from the power supply).

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU OPERATION

N Current Weekday

8VHꢀWRꢀVHWꢀFXUUHQWꢀZHHNGD\ꢀXVLQJꢀWKHꢀꢂ or ꢃ button.

Picture menu

N Advanced settings

N Current Time

Use to set the current time using the Numeric buttons.

Use the ꢄ or ꢅ button to select Advanced settings and press

the ꢂ or ꢃ button to enter the sub menu as follows.

ꢀ Other items in Time Menu should not be selected until Current

Time has been set.

N Schedule

Use to set up to 20 separate time schedules for “Power On” or “Power

Off”, select 1 ~ 20 using the ꢂ or ꢃ button.

N Weekday

DCDi (Directional Correlational Deinterlacing) is used to process

moving angled edge in deinterlacing to get the smoothest and most

natural image. Press the ꢂ or ꢃ button on the remote control to

select On or Off.

8VHꢀWRꢀVHWꢀWKHꢀVFKHGXOHꢀIRUꢀ³3RZHUꢀ2Q´ꢀRUꢀ³3RZHUꢀ2II´ꢀRIꢀDQ\ꢀZHHNGD\ꢀ

from Sunday through to Saturday or Everyday using the ꢂ or ꢃ

button.

ACC/ACM (ACC: Adaptive Contrast and Color; ACM-II: Active Color

Management-II) is used to select adaptive Brightness, Contrast and

tone control. Press the ꢂ or ꢃ button on the remote control to

select suitable mode either Vivid, Cinema, Sport or Off.

N Time

Use to set the schedule for “Power On” or “Power Off” of any time us-

ing the Numeric buttons.

CCS (Cross Color Separation) is used to remove residual chroma

information from luminance signal which is the result of imperfect

decoding of composite video. Press the ꢂ or ꢃ button on the

remote control to select either Auto, Standard or Off.

N Action

Use to set the schedule for “Power On” or “Power Off” active using

the ꢂ or ꢃ button.

You can set Power On timer in Time menu selecting “ON” in “On

Timer Function” in Installation Mode. If it is selected “OFF”, Power On

display in Time menu does not functional.

DNR (Digital Noise Reduction) is available for noise reduction. Press

the ꢂ or ꢃ button on the remote control to select either Auto,

Low, Mid, High or Off.

N On Program

Use to select AV1, RGB, AV2, AV3, PC, DVI or Network for the

schedule of “Power On” using the ꢂ or ꢃ button.

MPEG NR (MPEG Noise Reduction): Removes unwanted ringing and

EORFNꢀQRLVHꢀIURPꢀLPDJHVꢀWKDWꢀKDYHꢀXQGHUJRQHꢀ03(*ꢀRUꢀ-3(*ꢀFRP-

pression and decompression. Press the ꢂ or ꢃ button on the

remote control to select On or Off.

N Active

Film Modeꢀꢁ,QYHUVHꢀꢈꢐꢊꢀSXOOGRZQꢅꢐꢀ)LOPꢀYVꢆ9LGHRꢂ'HWHFWꢀ¿OPꢆꢀ3HUIRUPHGꢀ

on material which underwent technologic conversion to video. Press the

ꢂ or ꢃ button on the remote control to select On or Off.

Use to select ON or OFF using the ꢂ or ꢃ button. When set

³2))´ꢀWKHꢀDERYHꢀLWHPVꢀ³6FKHGXOH´ꢇꢀ³:HHNGD\´ꢇꢀ³7LPH´ꢇꢀ³$FWLRQ´ꢀRUꢀ³21ꢀ

Program” will be inactive.

Use NUMERIC buttons [0 ~ 9] to set On Time. (Action “Power On”

– 00:00 ~ 23:59)

Sound menu

Press the MENU button and select Sound using the ꢄ or ꢅ but-

ꢀ Once On Time has been set, when the set time is reached, the

monitor will leave the stand-by status and enter to the source

automatically.

tons, press the ꢂ or ꢃ button to enter.

ꢀ After On Time has been set, you can go on watching other pro-

grams. When the set time is reached, the monitor will automatically

switch to the preset program.

ꢀ On Program can only be selected whenAction (Power On) has

been set.

ꢀ Action (Power Off) can be set to turn the monitor into standby at a

selected time

Select and adjust to obtain the best sound settings for your environ-

ment using the ꢄ or ꢅ button to select Treble, Bass or Balance

and the ꢂ or ꢃ button to adjust levels.

Bass Expander can also be selected using the ꢄ or ꢅ button

and pressing the ꢂ or ꢃ button to select On or Off.

These settings automatically store when you exit the menu.

Press the BACK button to return to the previous menu.

Press the MENU button to exit menu operation.

Once On Program has been set, when the set time is reached, the

monitor will enter to the preset source automatically.

Use the ꢂ or ꢃ button to select On program, AV1, RGB, AV2,

AV3, PC, DVI or Network.

Setup menu

Press the MENU button and select Setup using the ꢄ or ꢅ but-

tons, press the ꢂ or ꢃ button to enter. Press the BACK but-

ton to return to the previous menu. Press the MENU button to exit.

Time menu

Press the MENU button and select Time using the ꢄ or ꢅ but-

tons, press the ꢂ or ꢃ button to enter. Press the BACK but-

ton to return to the previous menu. Press the MENU button to exit

menu operation.

N Menu Setup

Whenever Setup menu is accessed initially, Menu Setup will be the

default selection. Press the ꢂ or ꢃ button to enter the sub menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU OPERATION

H_Sets is used to divide the horizonal picture into more than one

part, but the most is 5 parts (5 monitors).

V_Sets is used to divide the vertical picture into more than one part,

and the most is also 5 parts (5 monitors). Using the ꢂ or ꢃ but-

ton to set.

H Location is used to select one part of the horizonal picture to dis-

play on the current LCD Monitor using the ꢂ or ꢃ button.

V Location is used to select one part of the vertical picture to display

on the current LCD Monitor using the ꢂ or ꢃ button.

Language is used to select the preferred language. Use the ꢂ or

ꢃ button to select English, French, German, Italian, Spanish or

Dutch.

%H]HOꢀ+ꢀ$GMXVWPHQW is used to align the image horizontally with

respect to the other monitors in the video wall to accommodate the

bezel width using the ꢂ or ꢃ button. (0 ~ 10)

H-Position changes the OSD position horizontally by using the ꢂ

or ꢃ button.

%H]HOꢀ9ꢀ$GMXVWPHQW is used to align the image vertically with respect

to the other monitors in the video wall to accommodate the bezel

width using the ꢂ or ꢃ button. (0 ~ 10)

V-Position changes the OSD position vertically by using the ꢂ or

ꢃ button.

Duration is used to set the display time of the MENU by using the

ꢂ or ꢃ button. (5 ~ 120 seconds)

N AV2 Setting

Transparence is used to adjust transparence of menu display. Use

the ꢂ or ꢃ button to adjust levels.

Use the ꢄ or ꢅ button to select AV2 Setting and press the ꢂ

or ꢃ button to select YPbPr or RGBHV.

Connect your PC to either PC-IN or RGBHV on the rear of the set.

Once connected select PC mode or AV2 (RGBHV, see page 6 for AV2

input settings) via the INPUT button on your remote control.

The set will become a monitor for the PC.

N PIP/POP Setup

Use the ꢄ or ꢅ button to select PIP/POP Setup and press the

ꢂ or ꢃ button to enter the sub menu.

N XGA Mode

Use the ꢄ or ꢅ button to select XGA Mode and press the ꢂ or

ꢃ button to select XGA or WXGA 1366 x 768.

N PC Power Save

The monitor set automatically turns off with no PC input signal and

ZDNHVꢀXSꢀZLWKꢀVLJQDOꢀZKLOHꢀ3&ꢀ3RZHUꢀ6DYHꢀLVꢀDFWLYHꢆ

Use the ꢄ or ꢅ button to select PC Power Save and press the

ꢂ or ꢃ button to select ON or OFF.

PIP/POP Mode: Using the ꢂ or ꢃ button select the most suit-

able mode PIP1, PIP2, POP or Off. (Please refer to page 13.)

ꢀ When Mode is set to Off, Sub Source and PIP Position will not

ZRUNꢆꢀ

PC Adj. menu

Main Source is used to select input source (AV1, RGB, AV2, AV3, PC,

Press the MENU button and select PC Adj. using the ꢄ or ꢅ

buttons, press the ꢂ or ꢃ button to enter. Press the BACK

button to return to the previous menu. Press the MENU button to

exit menu operation.

'9,ꢀRUꢀ1HWZRUNꢀꢅꢀIRUꢀPDLQꢀSLFWXUHꢀE\ꢀXVLQJꢀWKHꢀꢂ or ꢃ button.

Sub Source is used to select input source (AV1, AV2, AV3, PC or

DVI) for sub picture by using the ꢂ or ꢃ button.

ꢀ For a combination of main picture and sub picture: only DVI or

1HWZRUNꢀLQSXWꢀFDQꢀDVVHPEOHꢀZLWKꢀRWKHUꢀLQSXWꢀVRXUFHꢆꢀ)RUꢀH[DPSOHꢇꢀ

if main source is selected as AV1 input, then the sub source must

EHꢀ'9,ꢀRUꢀ1HWZRUNꢀLQSXWꢆ

PIP Position: Using the ꢂ or ꢃ button it can be selected Top

Left, Top Right, Bottom Right or Bottom Left.

N Initial Settings

This function returns all setting values except for Installation Mode.

Auto Adjust is used to automatically detect incoming signal, and

adjust itself to optimize its performance by using the ꢂ or ꢃ

button. If the image is not displayed properly, a manual adjustment is

required (Refer to following adjustments).

N Text Language

Use the ꢄ or ꢅ button to select Text Language and press the

ꢂ or ꢃ button to select Western, Eastern, Russian, Arabic or

Farsi.

H-Position is used to move the horizontal picture position by using

the ꢂ or ꢃ button.

V-Position is used to move the vertical picture position by using the

ꢂ or ꢃ button.

N Tile Mode

This function allows you to split an image to suit your monitor grid

format to create a video wall.

ClockꢀLVꢀXVHGꢀWRꢀHOLPLQDWHꢀÀLFNHUꢀIURPꢀWKHꢀLPDJHꢀE\ꢀXVLQJꢀWKHꢀꢂ or

ꢃ button.

Use the ꢄ or ꢅ button to select Tile Mode and press the ꢂ or

ꢃ button to enter the sub menu as follows.

Tile Mode Active can be set On or Off using the ꢂ or ꢃ but-

ton.

Phase is used to eliminate disorder from the image by using the ꢂ

or ꢃ button.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION MODE

N Address

Set the address for the LCD monitor (0 ~ 999).

Installation Mode

L Setting the monitor address in RS232 mode

G2.02 0000

Installation Mode

(DFKꢀPRQLWRUꢀFDQꢀKDYHꢀDꢀVSHFL¿Fꢀ$GGUHVVꢇꢀZKLFKꢀKHOSVꢀFRPPDQGꢀꢀꢀꢀꢀꢀ

that monitor individually and will not effect to other monitors con-

nected to a controlling PC Address format command.

The addressing format command is used for operating multiple

monitor sets from a single PC via the RS232C command line.

On program

Tuner Menu

Max Volume

Winter mode

RC inhibition

Child Lock

Address

Off

Baud rate

19200

N Baud rate

Panel protection

AV Auto shut off

Network Standby

On Timer Function

LED light setting

DCR

Off

Select Baud rate using the ꢄ or ꢅ button. To set transmission

speed RS232 or LD-NET communication for 19200 or 9600 Baud rate

by pressing the ꢂ or ꢃ button.

Off

Network initial

Temperature Error

IP Address

>>>

N Panel protection

7RꢀSUHYHQWꢀLPDJHꢀVWLFNLQJꢀZKLFKꢀPD\ꢀRFFXUꢀVKRZLQJꢀVWLOOꢀSLFWXUHꢀIRUꢀDꢀ

long time, select “Panel Protect” using the ꢄ or ꢅ button, once

highlighted you can select ON or OFF by pressing the ꢂ or ꢃ

button.

000000000000

Subnet

Gateway

DNS

Exit

Select

Adjust

N AV Auto shut off

With no picture input signal to AV1, RGB, AV2(YPbPr), AV3, DVI,

1HWZRUNꢇꢀVHWꢀWXUQVꢀRIIꢀDXWRPDWLFDOO\ꢆꢀ6HOHFWꢀ³$9ꢀ$XWRꢀ6KXWꢀ2II´ꢀXVLQJꢀ

the ꢄ or ꢅ button, once highlighted you can select On or Off by

pressing the ꢂ or ꢃ button.

This LCD monitor allows you to set up the following:

SETTING PROCEDURE

1. Press and hold the GREEN button on the remote control for 5

seconds. (Installation Mode will appear)

N Network Standby

<RXꢀFDQꢀVDYHꢀSRZHUꢀFRQVXPSWLRQꢀVHOHFWLQJꢀ³2II´ꢀDWꢀ1HWZRUNꢀ6WDQGE\ꢀ

in Installation mode, both RS232C and LD-NET do not functional. To

PDNHꢀWKHPꢀIXQFWLRQDOꢇꢀVHOHFWꢀ³21´ꢀLQꢀWKLVꢀPHQXꢆ

2. Use the ꢄ or ꢅ button to highlight each option, use the ꢂ or

ꢃ button to adjust each option. Press the MENU button to exit

the mode.

N On Timer Function

N On Program

You can save power consumption selecting “Off” at On Timer function

in Installation mode. On Timer in Time menu does not functional. To

PDNHꢀWKHPꢀIXQFWLRQDOꢇꢀVHOHFWꢀ³21´ꢀLQꢀWKLVꢀPHQXꢆ

Select ON program using the ꢄ or ꢅ button, select the start up

position using the ꢂ or ꢃ buttons.

ꢁ2IIꢋ$9ꢃꢋ5*%ꢋ$9ꢊꢋ$9ꢈꢋ3&ꢋ'9,ꢀRUꢀ1HWZRUNꢅ

N LED Light setting

Select LED Light setting using the ꢄ or ꢅ button, once highlight-

ed you can select On or Off by pressing the ꢂ or ꢃ button.

N Max Volume

Select Max volume using the ꢄ or ꢅ button, use the ꢂ or ꢃ

buttons to set the maximum volume required.

N DCR

N Winter mode

The picture contrast improved while DCR is ON. Select DCR using

the ꢄ or ꢅ button, once highlighted you can select On or Off by

pressing the ꢂ or ꢃ button.

This Function can be activated when the LCD monitor is used dur-

LQJꢀFROGꢀWHPSHUDWXUHꢀFRQGLWLRQVꢇꢀDSSUR[LPDWHO\ꢀꢈꢌÛ)ꢋꢎÛ&ꢀRUꢀEHORZꢀWRꢀ

maintain picture performance.

Using the ꢄ or ꢅ button select winter mode, once highlighted you

can select ON or OFF by pressing the ꢂ or ꢃ button.

IMPORTANT: The AC cord should not be disconnected during the

operation of Winter mode function.

N Network Initial

This function automatically installs the IP Address, Subnet, Gateway

and DNS information.

When in winter mode, power consumption is higher than normal

standby consumption. This is entirely due to the operation of heating

circuitry. We strongly recommend to turn off Winter mode when the

DPELHQWꢀWHPSHUDWXUHꢀLVꢀDERYHꢀꢈꢌÛ)ꢋꢎÛ&ꢆ

N Temperature Error

The recorded number of abnormal temperature is occurred is indi-

cated here.

N RC inhibition

You can prevent unwanted remote control operation by selecting RC

N IP Address/Subnet/Gateway/DNS

These 4 items display the LD-Net information. If LD-NET is NOT con-

Inhibition.

nected, all the items would be displayed as “000000000000”.

Select using the ꢄ or ꢅ button. Press the ꢂ or ꢃ button to

select On or Off.

To re-instate RC operation press and hold the green button on the

remote control and select RC inhibition OFF.

ꢀ Disconnecting the mains supply before exiting Installation Mode will

cancel the following features On program, RC inhibition, Address

and Baud Rate.

N Child Lock

You can prevent unwanted operation of the LCD monitor via the

buttons on the rear of the monitor.

Select using the ꢄ or ꢅ button. Press the ꢂ button to select

2QꢀRUꢀ2))ꢆꢀ7KHꢀ³&KLOGꢀ/RFN´ꢀ26'ꢀZLOOꢀDSSHDUꢀLIꢀEXWWRQVꢀDUHꢀSUHVVHGꢀ

ZKHQꢀFKLOGꢀORFNꢀLVꢀ2Qꢆ

ꢀ 6WDQGE\ꢀRSHUDWHVꢀQRUPDOO\ꢀZKHQꢀFKLOGORFNꢀLVꢀVHWꢀ³2Q´ꢆ

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

6HOHFWLRQꢀRIꢀSLFWXUHꢀVL]H

Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN 16:9,

ZOOM 14:9, TITLE IN 14:9, NORMAL or NATURAL WIDE by pressing

the WIDE button repeatedly on the Remote Control.

ꢀ When in AV2 (RGBHV) or PC mode FULL or NORMAL can be

selected.

Note: Full - Set display area 100%

ꢀ Only in DVI or AV2 (YPbPr) displaying high resolution content

FULL and FULL ALL are selectable.

Note: FULL - Set display area 95%

FULL ALL - Set display area 100%

All other inputs AV1, AV3, DVI or AV2 (YPbPr) (displaying lower reso-

lutions) can select all picture sizes.

N Full/Full All

N Title In 14:9

4:3

14:9

16:9

Letterbox Video

4:3

14:9

16:9

Letterbox Video

TITLES ON SCREEN

The whole screen The whole screen The whole screen 7KHꢀEODFNꢀEDUVꢀ

As zoom (14:9),

but bottom is

As zoom (14:9),

but bottom is

As zoom (14:9),

but bottom is

As zoom (14:9),

but bottom is

LVꢀ¿OOHGꢀVWUHWFKLQJꢀ LVꢀ¿OOHGꢀVWUHWFKLQJꢀ LVꢀ¿OOHGꢀZLWKꢀWKHꢀ

top and bottom

are present and

the height is

the width.

the height slightly corrrect picture

compressed even compressed even compressed even compressed even

at the edges.

ratio.

more to allow

subtitles to be

seen.

more to allow

subtitles to be

seen.

more to allow

subtitles to be

seen.

more to allow

subtitles to be

seen.

compressed.

N Normal

N Zoom 16:9

4:3

14:9

16:9

Letterbox Video

4:3

14:9

16:9

Letterbox Video

The correct

Zooms in slightly Zooms in slightly 7KHꢀEODFNꢀEDUVꢀ

The correct ratio %ODFNꢀEDUVꢀ

is maintained with left and right,

EODFNꢀEDUVꢀRQꢀWKHꢀ picture height is

%ODFNꢀEDUVꢀ

%ODFNꢀEDUVꢀOHIWꢇꢀ

right, top and

bottom.

picture width is

maintained but

the top and bot-

tom are cropped.

cropping the top

and bottom.

cropping the top

and bottom.

top and bottom

are smaller and

the picture height

is compressed

slightly.

left and right,

picture height is

stretched.

left and right.

stretched.

N Title in 16:9

N Natural Wide

4:3

14:9

16:9

Letterbox Video

4:3

14:9

16:9

Letterbox Video

TITLES ON SCREEN

As Zoom (16:9),

but bottom is

As Zoom (16:9),

but bottom is

As Zoom (16:9),

but bottom is

As Zoom (16:9),

but bottom is

Stretches the pic- The height is ex- 7KHꢀSLFWXUHꢀ¿OOVꢀ

ture horizontally SDQGHGꢀWRꢀ¿OOꢀWKHꢀ the screen and

7KHꢀEODFNꢀEDUVꢀ

top and bottom

remain and the

height is com-

SUHVVHGꢀWRꢀ¿WꢀWKHꢀ

picture area.

compressed even compressed even compressed even compressed even

WRꢀ¿OOꢀWKHꢀVFUHHQꢆꢀ whole screen.

The picture is

is proportionally

correct.

more to allow

subtitles to be

seen.

more to allow

subtitles to be

seen.

more to allow

subtitles to be

seen.

more to allow

subtitles to be

seen.

more stretched at

the edges.

N Zoom 14:9

4:3

14:9

16:9

Letterbox Video

The correct

Zooms in slightly Zooms in slightly 7KHꢀEODFNꢀEDUVꢀ

picture width is

maintained but

the top and bot-

tom are cropped.

cropping the top

and bottom.

cropping the top

and bottom.

top and bottom

are smaller and

the picture height

is compressed

slightly.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

PIP/POP Operation

Using this function, you can enjoy a DVI or Network program and an

image (AV1, AV2, AV3 or PC input) at the same time.

Press the ON/OFF button on the Remote Control repeatly to select

PIP1, PIP2, POP or OFF mode.

During the PIP/POP mode, press the Main/Sub Picture Swap but-

ton will switch the location for main and sub picture.

ꢀ Only the sound on the main picture is heard from the monitor

VSHDNHUꢆꢀ7KHꢀVRXQGꢀRQꢀWKHꢀVXEꢂSLFWXUHꢀFDQQRWꢀEHꢀKHDUGꢆ

ꢀ The details for PIP/POP operation (eg,location for sub picture or

input source for any picture,etc.), please refer to page 10.

N PIP1 mode

N PIP2 mode

N OFF mode

N POP mode

The left picture is main picture, the right picture is sub picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION (IN TEXT MODE)

Teletext Operation

Text Cancel

Teletext is only available via external sources.

Teletext mode can be operated by the following buttons on the Re-

mote Control.

Press the TEXT CANCEL button in TEXT or MIX mode, the TV pic-

ture appears on the screen.

Press this button once again or press TXT/TV button, CANCEL mode

will be cancelled.

ꢀ Some buttons have dual functions.

In CANCEL mode, “CAN” is always displayed on the upper left of the

screen.

TXT/TV

Press TXT/TV button to select teletext. Press again will display:

AV mode: AV/TEXT mode/MIX mode/AV.

Text Hold

Press Text Hold button to stop page request and updating.

Note:

MIX mode: AV (broadcast image) screen and the contents of TEXT

(superimposed) are displayed simultaneously.

HOLD ON:

The Hold symbol will appear instead of the page number.

Update of TELETEXT is forbidden. It holds on the current TEXT

screen display now.

CANCEL mode: TEXT/MIX MODE is cancelled temporarily and AV

image is displayed.

HOLD OFF:

If the signal is removed or disconnected, the monitor will revert to a

EOXHꢀEDFNJURXQGꢀZLWKꢀ³1RꢀVLJQDO´ꢀPHVVDJHꢀRQꢀWKHꢀVFUHHQꢆ

If the TXT/TV button is pressed during the CANCEL mode, the CAN-

CEL mode will be cancelled, and full text will resume.

The hold symbol is replaced with the page number.

TELETEXT page data is updated.

The present page is re-requested. (header roll)

7H[Wꢀ+ROGꢀEXWWRQꢀZLOOꢀRQO\ꢀZRUNꢀZKLOVWꢀLQꢀ7(;7ꢀ0RGHꢆ

Text Subcode

Text Reveal

Press this button, “110/. . . .” will be displayed (e.g. the current page is

110).

And press the NUMERIC buttons(0 ~ 9) to enter the sub page.

For example, to select sub page 4, press NUMERIC buttons 0 - 0 - 0

- 4, and “110/0004” will be displayed.

Press Text Reveal button to reveal hidden items on the text page.

Some pages such as quiz pages have the answers hidden. The button

PD\ꢀKDYHꢀWRꢀEHꢀKHOGꢀWRꢀNHHSꢀWKHꢀDQVZHUꢀRQꢀWKHꢀVFUHHQꢇꢀRUꢀSUHVVꢀDJDLQꢀ

to remove the answer.

:KHQꢀ¿QLVKHGꢇꢀSUHVVꢀWKHꢀWH[WꢀVXEFRGHꢀEXWWRQꢀWRꢀUHWXUQꢀWRꢀQRUPDOꢀ

operation.

In Reveal OFF, this indication is not given.

Text Reveal buttonꢀZLOOꢀRQO\ꢀZRUNꢀZKLOVWꢀLQꢀWH[WꢀPRGHꢆ

Text Index

Page Up and Down

Press this button to select one of the teletext index pages in TEXT,

MIX or CANCEL mode.

To select the next or previous page.

Volume Up/Down

Text Red

Use to select the red topic or page number at the bottom of the text

page.

To adjust the sound volume level.

7H[Wꢀ6L]H

Text Green

Press Text Size button to enlarge the top half of the text page.

Press Text Size button again to enlarge the bottom half of the text

page.

Use to select the green topic or page number at the bottom of the text

page.

Press Text Size button again to return to the normal size page.

(Normal/top half enlargement/bottom half enlargement/normal)

Text Yellow

Note:

During the top half or bottom half enlargement mode, if a page re-

quest is performed by [0 ~ 9] numeric buttons or the TEXT INDEX

button, it will return to normal mode and a page will be requested.

If HOLD ON/OFF is performed during the top half enlargement mode,

it will hold the top half enlargement mode. (HOLD symbol will display)

If HOLD ON/OFF is performed during the bottom half enlargement

mode, it will hold the bottom half enlargement mode. (HOLD symbol

will NOT display)

Use to select the yellow topic or page number at the bottom of the text

page.

Text Blue

Use to select the blue topic or page number at the bottom of the text

page.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS/HELPFUL HINTS

6SHFL¿FDWLRQ

Helpful hints

&RPPRQꢀVSHFL¿FDWLRQ

N NO PICTURE NO SOUND

L &KHFNꢀLIꢀPRQLWRUꢀLVꢀSOXJJHGꢀLQꢆ

L &KHFNꢀPRQLWRUꢀLVꢀQRWꢀLQꢀVWDQGE\ꢀPRGHꢆ

Power source: 100 ~ 240V 50Hz/60Hz

Colour system: PAL/NTSC/NTSC4.43/SECAM

AV terminal

N POOR PICTURE

AV1: Scart CENELEC Standard

Input: Composite video, RGB (5V RGB with 5V sync to pin 14)

and audio-L/R

L Adjust BRIGHTNESS/CONTRAST levels (too low).

Nꢀ12ꢀ&2/285ꢁꢀ3,&785(ꢀ2.

L Adjust COLOUR control.

Output: composite video from AV3 and audio L/R

AV2: BNC

Input: RGB, H and V/Y, Pb, Pr and audio L/R

Output: RGB, H and V/Y, Pb, Pr

L &KHFNꢀOHDGꢀFRQQHFWLRQVꢆ

L Does the signal input have colour.

AV3: BNC

Input: Composite video

Output: Composite video

N REMOTE CONTROL DOES NOT WORK

L &KHFNꢀEDWWHULHVꢀDUHꢀLQVHUWHGꢀFRUUHFWO\ꢆ

L &KHFNꢀFRQGLWLRQꢀRIꢀEDWWHULHVꢆ

Audio Monitor Out: CINCH L/R

Audio Speaker Out: 2 x 6W

L &KHFNꢀWRꢀVHHꢀLIꢀUHPRWHꢀFRQWUROꢀLQKLELWꢀLVꢀVHWꢀ21ꢆ

DVI

Nꢀ3,&785(ꢀ2.ꢁꢀ12ꢀ6281'

Input: DVI-D GROUP Standard

L &KHFNꢀH[WHUQDOꢀVSHDNHUVꢀDUHꢀFRQQHFWHGꢀFRUUHFWO\ꢆ

L &KHFNꢀOHDGꢀFRQQHFWLRQVꢀWRꢀH[WHUQDOꢀHTXLSPHQWꢆ

L &KHFNꢀYROXPHꢀWXUQHGꢀGRZQꢀRUꢀPXWHꢀVHOHFWHGꢆ

Input:ꢀ0LQLꢀ'ꢂ68%ꢀꢃꢄꢀ3,1ꢀDQGꢀ$XGLRꢀꢈꢆꢄPPꢀ-DFN

Serial Port: RS232C: Input/Output

Net Organiser: POA-LN02 (optional)

When ordering these products, give the Name and Type No. to the

sales dealer.

Screen

(inches/cm)

(viewing measured

diagonally)

Display Native

Resolution

Dimension

Veiwing angles

Model name

Contrast Ratio

Weight (kg)

(W x H x D)

CE42LH2R

32.8

33.8

37.5

1027 x 620 x 178.5 mm

H: 178°, V: 178°

CE42LH2DPB

CE42LH2WP

1000:1

42"/106.7 cm

1920 x 1080

1027 x 620 x 183 mm

L 7KHꢀVSHFL¿FDWLRQVꢀDUHꢀVXEMHFWꢀWRꢀFKDQJHꢀZLWKRXWꢀQRWLFHꢆ

L LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels

(0.01% or less) may be ineffective by the characteristics of the LCD panels.

Download from Www.Somanuals.com. All Manuals Search And Download.

DIMENSIONS

N CE42LH2WP

Unit: mm

989.0

925.4

(WALL MOUNT SCREW)

10 x M6, 1.0 PITCH x 12MM

418.4

41.8

1027.0

165.9

126.0

400.0

953.0

930.25

VIEWING AREA(H)

200.0

100.0

50.8

17.6

Handles x 2

178.5

402.9

417.9

Control buttons

43.7

ø4.2

Cables exit terminal cover

(RC RECEIVER)

ø4.2

(LED INDICATOR)

Download from Www.Somanuals.com. All Manuals Search And Download.

PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING LIST

N PC signal support timing

N DVI-D signal support timing

+RUL]RQWDOꢀ

Vertical

+RUL]RQWDOꢀ

Vertical

Resolution Frequency Frequency

Remark

Resolution Frequency Frequency

Remark

ꢅN+]ꢇ

31.47

31.43

37.50

37.86

43.27

35.00

34.97

35.16

37.88

46.875

34.50

38.00

53.67

49.72

48.36

56.47

60.02

48.50

60.31

61.00

68.68

60.24

37.5

ꢅ+]ꢇ

70.09

59.88

75.00

72.81

85.00

66.67

66.60

56.25

60.32

75.00

55.38

60.51

85.06

74.55

60.00

70.07

75.03

60.02

74.92

75.70

85.00

75.08

50.00

60.00

75.025

60.01

59.98

60.01

60.18

60.00

76.107

65.20

66.00

75.60

60.12

59.90

75.06

75.00

60.00

60.01

60.03

50.00

60.00

ꢅN+]ꢇ

31.43

37.86

37.5

ꢅ+]ꢇ

59.88

72.81

720 x 400

640 x 480

DOS (VGA)

VGA VESA 60Hz

VGA VESA 75Hz

VGA VESA 72Hz

VGA VESA 85Hz

Mac. 13

640 x 480

800 x 600

832 x 624

VGA VESA 60Hz

VGA VESA 72Hz

VGA VESA 75Hz

MAC LC 13"

640 x 480

34.97

66.6

66.67

56.25

60.32

640 x 480

MAC_NORMAL 13"

SVGA VESA 56Hz

SVGA VESA 60Hz

SVGA VESA 75Hz

MAC_NORMAL 16"

XGA VESA 60Hz

XGA VESA 75Hz

XGA VESA 70Hz

MAC_NORMAL 19"

MAC_NORMAL 21"

SXGA VESA 60Hz

480p

640 x 480

35.16

37.88

46.875

49.72

48.36

60.23

56.47

60.24

68.68

63.98

31.7

640 x 480

Mac LC 13"

SVGA VESA 56Hz

SVGA VESA 60Hz

SVGA VESA 75Hz

SVGA

800 x 600

74.55

800 x 600

1024 x 768

1152 x 870

1280 x 1024

720 x 480

800 x 600

75.03

70.07

75.08

75.06

60.02

59.94

800 x 600

SVGA

800 x 600

SVGA VESA 85Hz

Mac. 16

832 x 624

1024 x 768

1280 x 720

1280 x 960

1280 x 1024

1152 x 900

1400 x 1050

1152 x 870

1280 x 1024

1600 x 1200

1366 x 768

1360 x 768

1920 x 1080

XGA VESA 60Hz

XGA VESA 70Hz

XGA VESA 75Hz

XGA

720 x 480

15.73

31.25

15.63

37.5

480i

768 x 575

575p

XGA

768 x 575

575i

XGA

1280 x 720

1366 x 768

1360 x 768

1920 x 1080

720p - 50Hz

XGA VESA 85Hz

MAC_Normal 19"

720p - 50Hz

SXGA VESA 60Hz

SXGA VESA 75Hz

SXGA

720p - 60Hz

48.36

47.7

WXGA

60.00

79.976

63.370

63.34

63.74

63.79

63.90

81.13

61.20

61.85

71.40

65.35

65.12

68.68

80.00

75.00

48.36

47.73

28.125

33.75

28.125

33.75

56.25

67.5

1080i - 50Hz

1080i - 60Hz

HDTV 1080p - 50Hz

HDTV 1080p - 60Hz

HDTV 1080p - 24Hz

HDTV 1080p - 25Hz

HDTV 1080p - 30Hz

SXGA

27.00

28.13

33.75

SXGA

Depending on the condition of signals and the type and length of cables, these

signals may not be properly viewed.

To save the XGA Mode 1366 x 768 setting switch the monitor off then on using

the standby button.

SXGA

SXGA +

MAC_Normal 21"

Mac II

UXGA VESA 60Hz

WXGA

1080i - 50Hz

1080i - 60Hz

The monitor can be automatically adjusted in pc mode when receiving a stan-

dard VESA signal. It will be displayed as XGA when the monitor is receiving a

XGA or WXGA signal.

N Component signal support timing

+RUL]RQWDOꢀ

Vertical

Resolution Frequency Frequency

Remark

ꢅN+]ꢇ

15.735

15.625

31.25

45.00

37.50

33.75

28.13

ꢅ+]ꢇ

60i

720 x 480

720 x 576

SDTV 480i

SDTV 576i

SDTV 480p

SDTV 576p

HDTV 720p

HDTV 1080i

50i

720 x 480

60p

50p

60p

50p

60i

720 x 576

1280 x 720

1920 x 1080

50i

Download from Www.Somanuals.com. All Manuals Search And Download.

RS232C COMMAND TABLES

N Functional Execution Command Table

Command Item

N Image control Read Command Table

Status read command

Item

Status of Brightness.

C00

C01

C03

C10

C22

C24

C25

C26

C27

C28

C29

C30

C0F

C70

C71

C72

C73

C74

C75

C76

C64

C92

POWER ON

CR BRIGHT

CR CONT

CR COLOR

CR TINT

POWER OFF

Status of Contrast.

Status of Color.

Status of Tint.

Sharpness.

POWER ON/ OFF (toggle)

Wide toggle

Input

CR SHARP

Wide “Natural” direct

Wide “Zoom 16:9” direct

Wide “Title in 16:9” direct

Wide “Zoom 14:9” direct

Wide “Title in 14:9” direct

Wide “Full” direct

Picture

Status of White Balance Mode informa-

tion.

CR WBAL

CR WBAL-R

CR WBAL-G

CR WBAL-B

CR NZRED

CR FILM

Status of White Balance Red.

Status of White Balance Green.

Status of White Balance Blue.

Status of Noise reduction setting.

Status of Film mode setting.

Status of Image selection.

(The same as PICTURE mode)

CR IMAGE

Wide “Normal” direct

AV1 direct

CR DCDI

Status of DCDi setting.

RGB direct

CR ACCACM

CR CCS

Status of ACC/ACM setting.

Status of CCS setting.

AV2 RGBHV direct

AV2 YPbPr direct

AV3 direct

CR MPEGNR

Status of MPEG NR setting.

DVI direct

PC direct

N PC Read Command Table

PC Auto adjust

Factory settings

Power save ON

Power save OFF

&KLOGꢀORFNꢀ21

Status read command

Item

CR H-POS

CR V-POS

CR PHASE

CR CLOCK

Status of Horizontal position.

Status of Vertical position.

Status of PHASE value.

Status of CLOCK value.

CF PSAVE ON

CF PSAVE OFF

CF CLOK ON

CF CLOK OFF

CF DEA RMCY

CF DEA RMCN

&KLOGꢀORFNꢀ2))

RC inhibition OFF

RC inhibition ON

N Input Read Command Table

Status read command

Item

CR INPUT

Status of Input selection.

CR SOURCE

CR SYSTEM

Status of Input source mode.

Status of system of Input mode.

N Screen Read Command Table

Status read command

Item

Status of screen size.

(The same of WIDE mode)

CR SCREEN

Download from Www.Somanuals.com. All Manuals Search And Download.

RS232C COMMAND TABLES

N Time Read Command Table

N UK5 Read Command Table (Basic Command)

Status read command

Item

Command

CR0

Item

Note

Status of accumulated lifetime of panel.

(The same as CR_LAMPH Command)

Power

On, Standby, power error,

AV1, AV2, . . . , DVI, PC

Auto, Normal, Full, . . .

Dynamic, Standard, . . .

Signal/No signal

On/Off

CR PANELH

CR MONH

CR1

Input Mode

Wide mode

Status of accumulated lifetime of monitor.

ꢁ7KHꢀVDPHꢀDVꢀ&5B352-+ꢀ&RPPDQGꢅ

CR WIDE

CR PICTURE Picture mode

CR SIGNAL

CR CHILD

CR PSAVE

CRTM

Signal existence

&KLOGꢀORFN

N Sound control Read Command Table

Power save

On/Off

Status read command

CR VOLUME

Item

Panel usage time

RC inhibition

Model number

–––

Status of volume value.

Status of MUTE.

CR RMC

CR MDL

On/Off

CR MUTE

Model number

N Setting Read Command Table

N Error code Table

Status read command

Item

Error code

Note

CR LANG

CR P-MANE

CR TILE

Status of Language selection.

• Receiving the data that cannot be decoded.

• The wrong indication of parameter.

ꢁ:URQJꢀ¿JXUHGꢀQXPEHUꢇꢀRUꢀZURQJꢀZRUGꢀLVꢀLQFOXGHGꢅ

Status of Power management setting.

Status of Tile mode ON/OFF setting.

000

102

Normal receiving. (no error)

Status of Tile mode, the number of

Horizontal array.

CR TILE-HSETS

CR TILE-VSETS

CR TILE-HLOCAT

CR TILE-VLOCAT

&5ꢀ7,/(ꢂ%=/+$'-

&5ꢀ7,/(ꢂ%=/9$'-

If the command of out of range is directly entered

valuable parameter.

Status of Tile mode, the number of

Vertical array.

No matching with Hardware.

(Command for optional function which is not

equipped)

103

Status of Tile mode, the number of

Horizontal allocation.

If the command of “Out of range” is entered by

inclement or decrements by numeric value.

201

301

Status of Tile mode the number of Verti-

cal allocation.

While capturing the picture, no execution. Wait and

transmit command again.

Status of Tile mode, the width of bezel

(Horizontal).

While PIN code is in operation, no execution.

Wait and transmit command again.

402

101

Status of Tile mode, the width of bezel

(Vertical).

The errors not including above.

CR ONPROG

Status of On Program information.

Status of Winter mode Information.

Statuses of Panel protect Information.

Status of LED light Information.

CR WINTERMODE

CR PANELPROTECT

CR LEDLIGHT

CR AVAUTOSHUT

CR CHILDLOCK

CR RCINHIBITION

Status of AV auto shut OFF Information.

6WDWXVHVꢀRIꢀ&KLOGꢀORFNꢀ,QIRUPDWLRQꢆ

Status of RC Inhibit Information.

N Other Read Command Table

Status read command

Item

CR STATUS

CR SIGNAL

CR FREEZE

CR FANLOCK

CR TEMP

Status of the operation of the monitor.

Status of with or without signal.

Status of Freeze setting.

6WDWXVHVꢀRIꢀIDQꢀORFNꢀHUURUꢆ

Status of current temperature value.

Download from Www.Somanuals.com. All Manuals Search And Download.

N7RAK/ N7RBK/ N7RPK

6$1<2ꢀ(OHFWULFꢀ&Rꢂꢁꢀ/WGꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION GUIDELINES

CONSIGNES D’INSTALLATION

INSTRUCCIONES DE INSTALACIÓN

INSTALLATIONSRICHTLINIEN

INSTALLATIEHANDLEIDING

ISTRUZIONI DI INSTALLAZIONE

CE42LH2WP

CE42LM6WP

CE42SR2

CE52LH2WP

CE52SR2

CE52SR3

IMPORTANT

PLEASE READ THESE GUIDE LINES PRIOR TO UNPACKING

AND INSTALLATION.

IMPORTANT

VEUILLEZ LIRE ATTENTIVEMENT CES CONSIGNES AVANT

DE DEBALLER ET D’INSTALLER LE MONITEUR.

¡IMPORTANTE!

POR FAVOR, LEA ESTAS INSTRUCCIONES ANTES DE

PROCEDER AL DESEMBALAJE Y LA INSTALACIÓN.

WICHTIG

BITTE LESEN SIE DIESE RICHTLINIEN VOR DEM

AUSPACKEN UND DER INSTALLATION.

BELANGRIJK

LEES DEZE HANDLEIDING VOOR HET UITPAKKEN EN

INSTALLEREN.

IMPORTANTE

LEGGERE ATTENTAMENTE LE SEGUENTI ISTRUZIONI

PRIMA DI DISIMBALLARE E INSTALLARE IL PRODOTTO.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

IMPORTANT!!

To All Installers,

This monitor is sealed to IP66 standard. The integrity of

the enclosure MUST NOT be tampered with or breached.

The following guide lines highlight those areas of the

product that require particular care and attention in order

to ensure the integrity of the enclosure.

REMOVAL FROM OUTER CARTON

• We strongly advise that 2 ~ 4 PEOPLE handle the monitor when removing it from the carton.

Dropping or bumping the monitor during unpacking can result in damage to the sets integrity and

appearance.

• Please ensure carton top is facing upwards before removing monitor.

‡ꢀꢀ%HIRUHꢀUHPRYLQJꢀPRQLWRUꢀIURPꢀFDUWRQꢁꢀZHꢀUHFRPPHQGꢀWKDWꢀWKHꢀPRXQWLQJꢀEUDFNHWꢀLVꢀDWWDFKHGꢀÀUVWꢀWRꢀ

avoid any damage during installation.

• Please ensure that both installers grip the monitor as shown in photos below.

To lift and maneuver the monitor, please use the handles provided and support from underside as

illustrated in picture.

IT IS STRONGLY RECOMMENDED

TO HANDLE BY 2 ~ 4 PEOPLE.

Always use the handles to lift the set

ALWAYS SUPPORT THE MONITOR FROM UNDERNEATH

Download from Www.Somanuals.com. All Manuals Search And Download.

BACK OF MONITOR

LD-NET COVER

SECURITY FIXING POINT

(42 inch model only)

TERMINAL COVER

MAINS LEAD

* This photo is 42 inch model.

WEATHERPROOF ENCLOSURE VENTILATION

• There are labels to inform users that the vents MUST NOT be loosened or removed otherwise the

sealing of the set will be compromised. Adhesive applied to the vent threads provides added seal

security and a visual indication of tampering. In the event that this adhesive sealing is broken when

the set is returned, SANYO can not accept liability for the condition.

• Vent caps can be easily damaged. The set should always be lifted (DO NOT SLIDE) and always

PDNHꢀXVHꢀRIꢀUDLVHGꢀFXVKLRQVꢀXQGHUꢀWKHꢀDOXPLQLXPꢀIUDPHꢀLIꢀSODFHGꢀÁDWꢀRQꢀUHDUꢀVLGHꢂ

• The vents SHOULD NOT be covered or obstructed.

Please note that caps are easily damaged.

Do not lay monitor with rear side down without proper protection underneath.

EXAMPLE OF VENT

CAP MISSING

Download from Www.Somanuals.com. All Manuals Search And Download.

ANTI-TAMPER INK

• Anti-tamper ink has been placed on the screws on the back plate, AV insert and outer back

cabinet.

• This is to identify if the screws have been removed. Any attempt to remove the anti-tamper ink will

be CLEARLY visible.

• In the event that the back plate is removed, the sealing of the set will be compromised, therefore,

SANYO can not accept liability for any related failure.

ANTI-TAMPER INK

SCREWS

‡ꢀꢀ$OOꢀEDFNꢀSODWHꢀÀ[LQJꢀVFUHZVꢀXWLOLVHꢀUXEEHUꢀVHDOLQJꢀZDVK-

HUVꢂꢀ7KLVꢀLPSURYHVꢀWKHꢀDLUꢀWLJKWꢀLQWHJULW\ꢀRIꢀWKHꢀÀ[LQJꢀDQGꢀ

therefore MUST NOT be removed.

‡ꢀꢀ2QO\ꢀZDOOꢀPRXQWꢀÀ[LQJꢀDQGꢀWHUPLQDOꢀFRYHUꢀVFUHZVꢀPD\ꢀ

be removed by the installer. Under no circumstances

should non-SANYO screws be used as replacements.

RUBBER WASHER

SECURITY FIXING POINT (42 inch model only)

‡ꢀꢀ$ꢀVHFXULW\ꢀÀ[LQJꢀSRLQWꢀLVꢀSURYLGHGꢀRQꢀWKHꢀEDFNꢀSODWHꢀLQꢀ

order to secure the monitor to the installation point with

a security device.

• This is NOT for lifting purposes. Lifting the monitor by

WKHꢀVHFXULW\ꢀÀ[LQJꢀSRLQWꢀZLOOꢀFDXVHꢀGHIRUPDWLRQꢀRIꢀWKHꢀ

back plate, resulting in possible breakdown of the weath-

erproof seal.

Download from Www.Somanuals.com. All Manuals Search And Download.

REAR A.V.SHIELD COVER/TERMINAL COVER

‡ꢀꢀ$IWHUꢀFDEOHꢀLQVWDOODWLRQꢀ3/($6(ꢀHQVXUHꢀDOOꢀVHDOVꢀDUHꢀFRUUHFWO\ꢀÀWWHGꢀDVꢀVKRZQꢀEHORZꢀSULRUꢀWRꢀUHÀW-

ting the terminal cover and rear A.V.cover. ALLꢀÀ[LQJꢀVFUHZVꢀPXVWꢀEHꢀUHSODFHGꢀDQGꢀWLJKWHQHGꢂ

Check point

Check gasket is in place inside the cover. &DEOHVꢀPXVWꢀÀWꢀLQꢀWKHꢀVKDSHꢀRIꢀWKHꢀ

Gasket is important to seal cable area.

recess of the terminal base.

MAKE SURE CORD FITS IN

THE MOULD SHAPE

GASKET IN THE TERMINAL

COVER

GASKET IN THE RECESS

OF THE TERMINAL BASE

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINS LEAD

• The mains lead is secured to the back plate using a weatherproof cable gland.

Do not loosen the gland as this will impair the weatherproof sealing.

RUBBER WASHER

VIEW INSIDE ENCLOSURE

ADHESIVE TREATMENT

‡ꢀ7KHꢀFDELQHWꢀFRUQHUVꢀDUHꢀVHDOHGꢀXVLQJꢀDꢀVSHFLDOꢀDGKHVLYHꢀWRꢀPD[LPLVHꢀWKHꢀVHDOꢂ

• Sets must be handled with EXTREME care to ensure that this seal is not damaged. Please take

particular care not to drop or bump the set during handling/installation.

COATING MATERIAL

• The steel back plate is protected from corrosion using a polyester powder coating. Good care and

attention must be taken to prevent scratching the surface. Any uncoated metal will corrode poten-

tially affecting the integrity of the enclosure.

• Similarly the same care and attention applies to the aluminum enclosure which is anodised to pro-

tect it from corrosion.

CAUSE RUST!!

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLING POSITION

When the monitor installed outside, it SHOULD NOT set

in a position where the screen is subjected to direct sun

light.

If it can’t be done, please prepare adequate shading. Di-

rect sun light can cause the screen surface temperature

WRꢀULVHꢀDERYHꢀWKHꢀPD[LPXPꢀRSHUDWLQJꢀUDQJHꢂꢀ

This causes a black shadow to appear on the screen,

which will disappear when the screen temperature returns

WRꢀZLWKLQꢀVSHFLÀFDWLRQꢂ

WIRE ASSEMBLY

1. Connect the in-line waterproof AC cord, line up and push together connectors A & B so they are

tight and then twist C until A & B cannot be pulled apart. To disconnect unscrew C and pull con-

nector A & B apart.

To Connect

To Disconnect

2. Remove the covers A for access to connect required cables. Re-position the covers and replace

screws.

If LD Net connection is required remove cover B and connect cable, then re-position cover B and

replace screws.

DO NOT REMOVE SILICA GEL SACHETS FROM INSIDE LD-NET TERMINAL COVER (B)

AND TERMINAL COVER (A).

Thank you for your attention.

We hope our Weatherproof monitors are to your satisfaction.

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY PRECAUTIONS

CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but

LPSURSHUꢀXVHꢀFDQꢀUHVXOWꢀLQꢀSRWHQWLDOꢀHOHFWULFꢀVKRFNꢀRUꢀÀUHꢀKD]DUGVꢂꢀ,QꢀRUGHUꢀQRWꢀWRꢀGHIHDWꢀWKHꢀVDIHJXDUGVꢀLQFRUSRUDWHGꢀLQꢀWKLVꢀPRQLWRUꢀREVHUYHꢀWKHꢀ

following basic rules for its installation, use and servicing.

The operating temperature range of this monitor is guaranteed 0°C

Installation and Use

~ 40°C/32°F ~ 104°F. It is not recommended to install the screen

in direct sunlight without adequate shading, as this will cause the

WHPSHUDWXUHꢀRIꢀWKHꢀSDQHOꢀWRꢀULVHꢀDERYHꢀWKHꢀPD[LPXPꢀVSHFLÀHGꢂꢀ

Doing so may cause a black shadow to appear on the screen which

will disappear when the screen temperature returns to within the

VSHFLÀFDWLRQꢂꢀ7KLVꢀ´RIꢀFRXUVHµꢀGRHVꢀQRWꢀSURGXFHꢀDQ\ꢀKDUPIXOꢀHIIHFWꢀRQꢀ

the lifetime of the monitor.

Do not allow anything to rest on the power

cord. Do not locate this LCD monitor where the

cord will be damaged by people walking on it.

Do not RYHUORDGꢀZDOOꢀRXWOHWVꢀDQGꢀH[WHQVLRQꢀ

FRUGVꢀDVꢀWKLVꢀFDQꢀUHVXOWꢀLQꢀÀUHꢀRUꢀHOHFWULFꢀVKRFNꢂ

A suitable socket outlet must be provided near

Do not apply liquid cleaners or aerosol cleaners directly onto the LCD

to the monitor and shall be easily accessible.

monitor. Use a damp cloth for cleaning.

Do not place this LCD monitor near any heat

sources such as radiators, heaters, stoves and other heat-generating

SURGXFWVꢀꢃLQFOXGLQJꢀDPSOLÀHUVꢄꢂꢀ

ADDITIONAL FOR NORTH AMERICA AND CANADA:

This monitor must NOT be permanently mounted to the building

structure. It must be mounted in such a way that it can be removed

using basic tools.

Do not place your LCD monitor on an unstable stand, shelf or table.

Serious injury to an individual, and damage to the LCD monitor may

result if it should fall. Your sales person can recommend an approved

wall mounting kit. A special wall mounting kit is available for this

model.

The power supply cord must NOT be attached to the building surface.

The power supply cord must NOT be routed through walls, ceiling,

ÁRRUVꢁꢀRUꢀRWKHUꢀVLPLODUꢀRSHQLQJVꢀLQꢀWKHꢀEXLOGLQJꢀVWUXFWXUHꢂꢀ

The power supply cord MUST be positioned so as to prevent physical

damage.

This LCD monitor should be operated only from the type of power

source indicated on the monitor or as indicated in the Operating In-

structions. If you are not sure of the type of power supply, consult your

sales person or your local power company.

Important: (UK only)

For added protection it is strongly recommended that this LCD

monitor has its mains supplied via an approved earth fault protection

device.

THIS PRODUCT MUST BE EARTHED.

7KLVꢀHTXLSPHQWꢀLVꢀÀWWHGꢀZLWKꢀDQꢀDSSURYHGꢀPDLQVꢀOHDGꢀDQGꢀDQꢀ

approved non rewireable UK mains plug. To change a fuse in this

type of plug proceed as follows:

WARNING: To prevent injury the LCD monitor must be securely

attached to the wall in accordance with the manufacturers installation

instructions.

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS1362 13 Amp A.S.T.A. or

BSI approved type.

IMPORTANT:

3.ꢀ(QVXUHꢀWKDWꢀWKHꢀIXVHꢀFRYHUꢀLVꢀFRUUHFWO\ꢀUHÀWWHGꢂ

This product must be earthed.

This unit is not disconnected from the mains unless the mains lead

is unplugged. The installer must make sure that the waterproof inline

coupler is easily accessible.

If the fuse cover is lost or damaged the plug must NOT be used

but replaced with a serviceable plug.

,IꢀWKHꢀÀWWHGꢀSOXJꢀLVꢀQRWꢀVXLWDEOHꢀIRUꢀ\RXUꢀVRFNHWꢀRXWOHWVꢁꢀLWꢀVKRXOGꢀ

EHꢀFXWꢀRIIꢀDQGꢀDQꢀDSSURSULDWHꢀSOXJꢀÀWWHGꢀLQꢀLWVꢀSODFHꢂꢀ,IꢀWKHꢀPDLQVꢀ

plug contains a fuse, this should have a rating of 13 Amp, ensure

WKHꢀIXVHꢀFRYHUꢀLVꢀFRUUHFWO\ꢀÀWWHGꢂꢀ,IꢀDꢀSOXJꢀZLWKRXWꢀDꢀIXVHꢀLVꢀXVHGꢁꢀ

the fuse at the distribution board should not be greater than 13

Amp.

This monitor is tested to IP66 standard rating.

This monitor is not protected against temporary or continuous

immersion in liquid.

Do not use immediately after moving the LCD monitor from a low

temperature to a high temperature environment, as this causes con-

GHQVDWLRQꢁꢀZKLFKꢀPD\ꢀUHVXOWꢀLQꢀÀUHꢁꢀHOHFWULFꢀVKRFNꢁꢀRUꢀRWKHUꢀKD]DUGVꢂꢀ

Before cleaning, unplug the monitor from the wall socket.

Note: The severed plug must be destroyed to avoid a possible

VKRFNꢀKD]DUGꢀVKRXOGꢀLWꢀEHꢀLQVHUWHGꢀLQWRꢀDꢀꢅꢆꢀ$PSꢀVRFNHWꢀHOVH-

where.

Do notꢀPRXQWꢀQHDUꢀDQꢀRSHQꢀÁDPHꢀVRXUFHꢂꢀ2SHQꢀÁDPHVꢀPXVWꢀQHYHUꢀ

be used near this LCD monitor.

The wires in this mains lead are coloured in accordance with the

following code:

This LCD monitor should not be built in or enclosed in any way, heat

build up will reduce the life of the monitor.

Blue

Neutral

Live

Brown

This LCD monitor should have a minimum distance of 5cm away from

Green and Yellow

Earth

the wall and the monitor should have 10cm distance around the top

1. The Blue wire must be connected to the terminal which is

and sides.

PDUNHGꢀZLWKꢀWKHꢀOHWWHUꢀ´1µꢀRUꢀFRORXUHGꢀ%/$&.ꢂ

AlwaysꢀPRXQWꢀXVLQJꢀUHFRPPHQGHGꢀDQGꢀVXEVWDQWLDOꢀÀ[WXUHVꢀDQGꢀÀW-

2. The Brown wire must be connected to the terminal with the

tings.

OHWWHUꢀ´/µꢀRUꢀFRORXUHGꢀ5('ꢂ

10cm

3. The Green and Yellow wire must be connected to the termi-

QDOꢀZKLFKꢀLVꢀPDUNHGꢀZLWKꢀWKHꢀOHWWHUꢀ´(µꢀRUꢀFRORXUHGꢀ*5((1ꢀRUꢀ

GREEN and YELLOW.

5cm

10cm

Before replacing the plug cover, make certain that the cord grip is

clamped over the sheath of the lead - not simply over the wires.

Do not attempt to bypass the safety purpose of the grounding

type plug.

7KHꢀUHDUꢀÀQQHGꢀVHFWLRQꢀDURXQGꢀWKHꢀFDELQHWꢀIXQFWLRQVꢀDVꢀDꢀKHDWꢀVLQNꢁꢀ

UHPRYLQJꢀKHDWꢀDZD\ꢀIURPꢀWKHꢀPRQLWRUꢂꢀ7KHꢀH[WHUQDOꢀVXUIDFHꢀRIꢀWKHꢀ

FDELQHWꢀꢃÀQQHGꢀDUHDꢄꢀPXVWꢀQRWꢀEHꢀFRYHUHGꢀRUꢀWKHꢀDLUÁRZꢀUHVWULFWHGꢀLQꢀ

anyway by enclosing the LCD monitor.

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UN-

LESS THE MAINS LEAD IS UNPLUGGED.

THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS

EASILY ACCESSIBLE.

Download from Www.Somanuals.com. All Manuals Search And Download.

SERVICING

Servicing

Your monitor is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage

objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively

use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare

SDUWVꢀFDQꢀSUHYHQWꢀÀUHꢁꢀVKRFNꢀDQGꢀRWKHUꢀKD]DUGVꢂ

8QSOXJꢀWKHꢀ/&'ꢀPRQLWRUꢀIURPꢀWKHꢀZDOOꢀRXWOHWꢀDQGꢀUHIHUꢀVHUYLFLQJꢀWRꢀTXDOLÀHGꢀVHUYLFHꢀSHUVRQQHOꢀXQGHUꢀWKHꢀIROORZLQJꢀ

conditions:

N If the power cord or plug is damaged.

N If liquid has been spilt in to the LCD monitor.

N If the LCD monitor has been dropped or the cabinet has been damaged.

N ,IꢀWKHꢀ/&'ꢀPRQLWRUꢀH[KLELWVꢀDꢀGLVWLQFWꢀFKDQJHꢀLQꢀSHUIRUPDQFHꢂ

N If the LCD monitor does not operate normally by following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage.

7KLVꢀZLOOꢀRIWHQꢀUHTXLUHꢀH[WHQVLYHꢀZRUNꢀE\ꢀDꢀTXDOLÀHGꢀWHFKQLFLDQꢀWRꢀUHVWRUHꢀWKHꢀPRQLWRUꢀWRꢀQRUPDOꢀRSHUDWLRQꢂ

Important recycling information.

Your SANYO product is designed and manufactured with high quality materials and components

which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be dis-

posed of separately.

In the European Union there are separate collection systems for used electrical and electronic

products.

Please help us to conserve the environment we live in!

Note: This symbol mark and recycle system are applied only to EU countries are not applied to

other countries of the world.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interfer-

HQFHꢀLQꢀZKLFKꢀFDVHꢀWKHꢀXVHUꢀZLOOꢀEHꢀUHTXLUHGꢀWRꢀFRUUHFWꢀWKHꢀLQWHUIHUHQFHꢀDWꢀKLVꢀRZQꢀH[SHQVHꢂ

'RꢀQRWꢀPDNHꢀDQ\ꢀFKDQJHVꢀRUꢀPRGLÀFDWLRQVꢀWRꢀWKHꢀHTXLSPHQWꢀXQOHVVꢀRWKHUZLVHꢀVSHFLÀHGꢀLQꢀWKHꢀLQVWUXFWLRQVꢂꢀ,IꢀVXFKꢀFKDQJHVꢀRUꢀPRGLÀFDWLRQVꢀ

should be made, you could be required to stop operation of the equipment.

Canadian Radio Interference Regulations

This Class A digital apparatus meets all requirements of the Canadian ICES-003.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take

adequate measures.

Download from Www.Somanuals.com. All Manuals Search And Download.

GB SERVICING

AC Power Cord Requirement

The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you

purchase it.

AC Power Cord for the United States and Canada:

GROUND

$&ꢀ3RZHUꢀ&RUGꢀXVHGꢀLQꢀWKHꢀ8QLWHGꢀ6WDWHVꢀDQGꢀ&DQDGDꢀLVꢀOLVWHGꢀE\ꢀWKHꢀ8QGHUZULWHUVꢀ/DERUDWRULHVꢀꢃ8/ꢄꢀDQGꢀFHUWLÀHGꢀ

by the Canadian Standard Association (CSA).

$&ꢀ3RZHUꢀ&RUGꢀKDVꢀDꢀJURXQGLQJꢇW\SHꢀ$&ꢀOLQHꢀSOXJꢂꢀ7KLVꢀLVꢀDꢀVDIHW\ꢀIHDWXUHꢀWRꢀPDNHꢀVXUHꢀWKDWꢀWKHꢀSOXJꢀZLOOꢀÀWꢀLQWRꢀWKHꢀSRZHUꢀRXWOHWꢂꢀ

Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE

End-User License

The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utili-

ties and modules embedded within the Product) which is owned by Sanyo or its licensors. Before using the product, please read the End-User

License Conditions detailed below. If you do not agree to the terms and conditions of the End-User License, Please do not proceed to use the

Product- repack the Product unused and return it to your supplier together with proof of purchase for a full refund. By using the product, you

agree to be bound by the terms and conditions of the End-User License.

/LFHQVHꢀ*UDQWꢁꢀ&RQGLWLRQVꢀDQGꢀUHVWULFWLRQV

1.ꢀꢀ6DQ\RꢀJUDQWVꢀ\RXꢀDꢀQRQꢇH[FOXVLYHꢁꢀZRUOGꢇZLGHꢀꢃVXEMHFWꢀWRꢀH[SRUWꢀFRQWUROVꢄꢁꢀQRQꢇWUDQVIHUDEOHꢀꢃH[FHSWꢀDVꢀSHUPLWWHGꢀE\ꢀꢈꢀEHORZꢄꢁꢀUR\DOW\ꢇIUHHꢀ

license to use the Software upon and with the Product.

2. You may not transfer any of your license rights in the Software without the prior written consent of SANYO and if consent is provided then

the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed

to accept the terms and conditions of this license.

3. You must ensure that the copyright, trademark and other protective notices contained in the Software are maintained and not altered or

removed.

4. The Software provided hereunder is copyrighted and licensed (not sold). SANYO especially does not transfer title or and ownership rights

in the Software to you. The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under

license by a third party supplier.

5.ꢀ([FHSWꢀDVꢀH[SUHVVO\ꢀSHUPLWWHGꢀE\ꢀVWDWXWHꢀ\RXꢀPD\ꢀQRWꢉ

L XVHꢀWKHꢀ6RIWZDUHꢀLQꢀFRQMXQFWLRQꢀZLWKꢀDQ\ꢀRWKHUꢀFRPSXWHUꢀKDUGZDUHꢀRWKHUꢀWKDQꢀWKHꢀSURGXFWꢉ

L FRS\ꢀDOOꢀRUꢀSDUWꢀRIꢀWKHꢀ6RIWZDUHꢉ

L LQFRUSRUDWHꢀDOOꢀꢃRUꢀDQ\ꢀRIꢄꢀWKHꢀ6RIWZDUHꢀLQWRꢀRWKHUꢀSURJUDPVꢀGHYHORSHGꢀE\ꢀꢃRUꢀRQꢀEHKDOIꢀRIꢄꢀ\RXꢀDQGꢊRUꢀXVHGꢀE\ꢀ\RXꢉ

L UHYHUVHꢇHQJLQHHUꢁꢀGHFRPSLOHꢀRUꢀGLVDVVHPEOHꢀWKHꢀ6RIWZDUHꢉ

L PDNHꢀWKHꢀ6RIWZDUHꢀꢃRUꢀDQ\ꢀSDUWꢀRIꢀLWꢄꢀDYDLODEOHꢁꢀRUꢀSHUPLWꢀLWVꢀUHGLVWULEXWLRQꢁꢀIRUꢀXVHꢀZLWKꢀDQ\ꢀFRPSXWHUꢀKDUGZDUHꢀRWKHUꢀWKDQꢀWKHꢀ3URGXFWꢉꢀRUꢀ

rent, lease, gift, loan, sell, distribute or transfer possession of the whole or any part of the Software.

Termination

This license is effective until terminated. This license will terminate automatically without notice if you fail to comply with any of its provisions.

Disclaimer

1.ꢀꢀ7KHꢀ6RIWZDUHꢀLVꢃWRꢀWKHꢀH[WHQWꢀSHUPLWWHGꢀE\ꢀODZꢄꢀVXSSOLHGꢀ´DVꢀLVµꢀDQGꢀ6$1<2ꢀDQGꢀLWVꢀVXSSOLHUVꢀH[SUHVVO\ꢀH[FOXGHꢀDOOꢀZDUUDQWLHVꢁꢀH[SUHVVꢀRUꢀ

LPSOLHGꢁꢀLQFOXGLQJꢀꢃEXWꢀQRWꢀOLPLWHGꢀWRꢄꢀZDUUDQWLHVꢀRIꢀVDWLVIDFWRU\ꢀTXDOLW\ꢁꢀÀWQHVVꢀIRUꢀSXUSRVHꢀDQGꢀQRQꢇLQIULQJHPHQWꢀꢃVDYHꢀWRꢀWKHꢀH[WHQWꢀWKDWꢀWKHꢀ

VDPHꢀDUHꢀQRWꢀFDSDEOHꢀRIꢀH[FOXVLRQꢀDWꢀODZꢄꢂ

2.ꢀꢀ,QꢀQRꢀFLUFXPVWDQFHVꢀZLOOꢀ6$1<2ꢀEHꢀOLDEOHꢀIRUꢀDQ\ꢀGLUHFWꢁꢀLQGLUHFWꢁꢀFRQVHTXHQWLDOꢁꢀRUꢀLQFLGHQWDOꢀGDPDJHꢀꢃLQFOXGLQJꢀORVVꢀRIꢀSURÀWVꢁꢀEXVLQHVVꢀ

interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inability to use

WKHꢀ6RIWZDUHꢀꢃVDYHꢀWRꢀWKHꢀH[WHQWꢀWKDWꢀVXFKꢀOLDELOLW\ꢀLVꢀQRWꢀFDSDEOHꢀRIꢀH[FOXVLRQꢀDWꢀODZꢄꢂ

General

1. This End-User License will be governed by laws of England and the User may only bring claims in the English Courts and SANYO shall be

entitled to bring a claim in the courts of any jurisdiction.

2. This End-User License is governed by the laws of the State of California. The End-User and Sanyo agree that any action to enforce or

interpret the terms of this End-User License shall be brought only in the appropriate state or federal court located in Los Angeles County,

&DOLIRUQLDꢂ7KHꢀ(QGꢇ8VHUꢀDQGꢀ6DQ\RꢀKHUHE\ꢀVXEPLWꢀWRꢀWKHꢀH[FOXVLYHꢀMXULVGLFWLRQꢀDQGꢀYHQXHꢀRIꢀVXFKꢀFRXUWꢂ

3. The above terms and conditions supersede any prior agreement, oral or written, between you and SANYO relating to the Software.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Step: 1 Mains Connection

Nꢀꢀ&RQQHFWꢀWKHꢀGLVSOD\ꢀXQLWꢀWRꢀ9*$ꢁꢀ%1&ꢀDQGꢀ6FDUWꢀFRQ-

nector as required.

LD-Net

ꢎꢀ7KLVꢀÀJXUHꢀLVꢀꢏꢈꢀLQFKꢀPRGHOꢂ

1. Connect the in-line power connector to the Mains Inlet as shown

4. AV3

Composite (CVBS) signal input.

above.

AV3-OUT can be used to output the incoming AV3 signal to the

other monitor.

2. Connect the power cord of the LCD monitor to a suitable wall

outlet.

5. DVI-D (Digital Video Interface)

ꢀ As this product does not have a mains On/Off switch, please

DVI-D supports a large range of resolutions as shown in the IN-

STRUCTION MANUAL on page 17.

ensure your mains plug is easily accessible.

ꢀ The LCD monitor is prepared for a mains voltage AC100 ~ 240V,

ꢋꢌ+]ꢊꢍꢌ+]ꢂꢀ7RꢀFRPSOHWHO\ꢀVZLWFKꢀRIIꢀWKHꢀPDLQVꢁꢀRUꢀZKHQꢀWKHꢀ

GLVSOD\ꢀXQLWꢀLVꢀQRWꢀWRꢀEHꢀXVHGꢀIRUꢀDQꢀH[WHQGHGꢀSHULRGꢀRIꢀWLPHꢁꢀLWꢀLVꢀ

advisable to disconnect the power cord from the power outlet.

6. PC connection

PC input (PC-IN D-SUB). This input supports a large range of reso-

lutions as shown in the INSTRUCTION MANUAL page 17. Audio

can be connected via the 3.5mm PC-AUDIO IN.

Mains

tle

7. External Speaker

Output the audio signal from AV1, AV2, AV3, PC and DVI.

The speaker impedance is 8 ohms.

ꢀ Please use the correct mains lead supplied with the set for your

area.

3. Warning: To prevent injury, the unit must be securely attached to

the wall in accordance with the installation instructions.

WARNING! High voltages are used in the

RSHUDWLRQꢀRIꢀWKLVꢀVHWꢂꢀ5HIHUꢀVHUYLFHꢀWRꢀTXDOLÀHGꢀ

service personnel.

8. AV2 / DVI AUDIO IN

Connect the audio output (stereo) from a computer or video equip-

ment connected AV2 or DVI.

Step: 2 Connections

N INPUT selection

To switch either AV1, RGB, AV2, AV3, PC, DVI or Network by pressing

the INPUT button on your remote control repeatedly.

1. AV1

SCART connection/CVBS/RGB/S-VIDEO.

2. RGB

9. Monitor Audio OUT

TTL input (5V RGB signals) into SCART terminal.

7KLVꢀWHUPLQDOVꢀRXWSXWꢀÀ[HGꢀOHYHOꢀIURPꢀ$8',2ꢀ,1ꢂ

ꢃꢂꢀ<ꢁꢀ3Eꢁꢀ3Uꢄ5*%+9ꢀFRQQHFWLRQꢀꢅ$9ꢆꢇ

10. RS232C IN/OUT

Choose Y, Pb, Pr or RGB H/V connection by selecting AV2 Setting

in Set up menu (refer to the INSTRUCTION MANUAL on page 10).

You can connect your DVD player to the Y, Pb, Pr terminals instead

RIꢀXVLQJꢀDꢀVFDUWꢀOHDGꢂꢀ7KLVꢀFDQꢀVXSSRUWꢀKLJKꢀGHÀQLWLRQꢀLQꢀDQDORJXHꢀ

component form. RGB H/V can be used as a PC input via the BNC

terminals. Both options support a large range of resolutions (refer

to the INSTRUCTION MANUAL on page 17). AV2-OUT can be used

to output the incoming AV2 signal to the other monitor.

When the monitor is controlled by a computer, connect to this jack

with serial control cable.

You can connect to another monitor with RS232C OUT.

:KHQꢀ\RXꢀFRQQHFWꢀ3&ꢀZLWKꢀ56ꢈꢆꢈ&ꢁꢀVHOHFWꢀ´21µꢀDWꢀ1HWZRUNꢀ

standby in Installation mode.

,IꢀLWꢀLVꢀVHOHFWHGꢀ´2))µꢁꢀ56ꢈꢆꢈ&ꢀWHUPLQDOVꢀGRꢀQRWꢀIXQFWLRQDOꢂꢀ$OVRꢀ

VHOHFWꢀSXVKꢀEXWWRQꢀWRꢀ´6(5,$/ꢀ32$57µꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

GB INSTALLATION

Remote control

Standby

Input

To switch the monitor on and off. Also, refer to the

INSTRUCTION MANUAL on page 8.

To switch input source from AV1, RGB, AV2, AV3,

PC, DVI or Network mode.

Recall

To display input selection information and the Time

set.

Wide

You can also select colour systems in AV1/AV3

mode as follows: AUTO í PAL í SECAM í

NTSC í NTSC4.43 í PAL M í PAL N.

To select the screen mode Full, Full All, Zoom

16:9, Title in 16:9, Zoom 14:9, Title in 14:9,

Normal or Natural wide.

Refer to the INSTRUCTION MANUAL on page 12.

Auto PC

It can also be automatically adjusted in PC mode

by pressing this button for twice .

7RꢀHQWHUꢀDQGꢀH[LWꢀWKHꢀPDLQꢀPHQXꢁꢀDQGꢀVXEꢀPHQXꢂ

Back

Used to return to the previous menu.

Up and Down

Level Up/Down

7RꢀVHOHFWꢀWKHꢀQH[WꢀRUꢀSUHYLRXVꢀLWHPꢂ

To adjust the sound volume level or enter sub

^mF/^eO^nuK^s.

Sound Mute

7RꢀFRQÀUPꢀWKHꢀLQLWLDOꢀVHWWLQJꢀLQꢀWKHꢀPHQXꢂ

To mute the sound from the speakers.

The sound changes as follows: Normal

volume

Picture mode selector

Mute.

Press the ꢆ button repeatedly to select the fol-

lowing picture mode.

Bass Expander

Personal - Personal preference mode.

Standard - Normal viewing mode.

Dynamic - Suitable for brightly lit rooms.

Soft - Low contrast setting

To get an emphasised bass sound ON or OFF.

TXT/TV

7RꢀVHOHFWꢀ7HOHWH[WꢀPRGHꢂ

Eco - Suitable for dimly lit rooms and gives a cin-

ema-like effect.

Main/Sub Picture Swap

To swap Main and Sub picture.

)UHH]H

ON/OFF

To switch picture still on or off.

To switch OFF í PIP(1) í PIP(2) í POP mode

in turn.

Green

Press this button for more than 5 seconds, installa-

tion mode will appear.

Refer to the INSTRUCTION MANUAL on page 13.

FOR EU USERS

Remote control battery installation

The symbol mark and recycling systems described below apply to EU

countries and do not apply to countries in other areas of the world.

Your SANYO product is designed and manufactured with high quality

materials and components which can be recycled and/or reused.

The symbol mark means that electrical and electronic equipment,

batteries and accumulators, at their end-of-life, should be disposed of

separately from your household waste.

Note:

If a chemical symbol is printed beneath the symbol mark, this chemi-

cal symbol means that the battery or accumulator contains a heavy

metal at a certain concentration. This will be indicated as follows: Hg:

mercury, Cd: cadmium, Pb: lead

In the European Union there are separate collection systems for used

electrical and electronic equipment, batteries and accumulators.

Please, dispose of them correctly at your local community waste col-

lection/recycling centre.

Please, help us to conserve the environment we live in!

,QVWDOOꢀWZRꢀ´$$µꢀꢅꢂꢋꢀYROWꢀEDWWHULHVꢀVRꢀWKDWꢀWKHꢀ´ꢐµꢀDQGꢀ´²µꢀPDUNVꢀRQꢀWKHꢀ

EDWWHULHVꢀPDWFKꢀWKHꢀ´ꢐµꢀDQGꢀ´²µꢀPDUNVꢀLQVLGHꢀWKHꢀXQLWꢀLQWRꢀWKHꢀUHPRWHꢀ

control handset.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

Controls and Menus

Menu Operation

Many of your monitors functions are controlled through the menu

function, using the remote control.

Picture

Brightness

Contrast

Color

Tint (only if NTSC equipment is detected)

Sharpness

White Tone

White Tone / R / G / B

Advanced Setting

DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode

Sound

Time

Treble

Bass

Balance

On / Off

Bass Expander

Current Weekday

Current Time

Schedule

Weekday

Time

1 - 20

Action

Power On / Power Off

On Program

AV1 / RGB / AV2 / AV3 / PC / DVI / Network

On / Off

Active

Setup Menu Setup

Language / H/V-Position / Duration / Transparence

PIP / POP Setup

PIP/POP Mode / Main/Sub Source / PIP Position

Initial Settings

Text Language

Tile Mode

Western / Eastern / Russian / Arabic / Farsi

Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment

AV2 Setting

XGA Mode

RGBHV / YPbPr

XGA / WXGA 1366x768

On / Off

PC Power save

PC Adj. Auto Adjust

H-Position

V-Position

Clock

å ^{The LCD display has a Standby light to show there is power.}

Phase

Switching into/from standby mode

During menu operation the bottom of the on screen display will show

which controls can be used for menu navigation.

The Standby mode is used for switching the LCD monitor off for short

periods of time. In standby mode the monitor is switched off but is still

receiving mains power.

Press the MENU button to enter the main menu. Whenever main

menu is accessed initially, PICTURE will be the default selection.

^LT^Tohe^tub^rnlue^thp^eo^mw^oeⁿrⁱi^tn^od^riⁱcⁿa^toto^sr^ti^allⁿu^dm^bin^ya^mte^os^dm^e,o^pr^re^eb^ssrig^thh^etly^ꢇ. ^button.

^{L T}a^oga^tuin^r.^{n the monitor ON from standby mode, press the ꢇ button}

A sub menu is selected using the ꢊ or ꢋ button and pressing

the ꢈ or ꢉ button when the required sub menu is highlighted.

:KHQꢀ\RXꢀKDYHꢀÀQLVKHGꢀ\RXꢀFDQꢀSUHVVꢀWKHꢀBACK button to return to

the previous menu, press the MENU buttonꢀWRꢀH[LWꢀWKHꢀPHQXꢀRSHUDWLRQꢂ

,Iꢀ\RXꢀÀQGꢀWKHꢀSRZHUꢀLQGLFDWRUꢀÁDVKLQJꢁꢀGLVFRQQHFWꢀ

power cord from the power outlet and contact our

Service desk.

This warning is a sign to let you know that the

power protection function of this TV set is now

operating.

Picture menu

1. Press the MENU button. PICTURE will be the default selection.

Press the ꢈ or ꢉ button to enter.

ç ^{Control buttons (bottom corner of back cover)}

6HWꢀWKHꢀSLFWXUHꢀVHWWLQJVꢀIRUꢀ\RXUꢀ´personalµꢀSUHIHUHQFHꢂ

Menu button: Used to display or cancel main menu.

Input/ button: Switch between AV1, RGB, AV2, AV3, PC , DVI

or Network mode. It is also used to provide sub

menu selection from the Main Menu.

2. Use the ꢊ or ꢋ button to select eg. Brightness and the ꢈ or

ꢉ button to adjust levels.

ꢈ or ꢉ buttons: provide up and down adjustments.

N White Tone

ꢇ button: To switch to standby mode (to switch off completely

May be used to adjust the color tone of the picture. Use the ꢊ or

ꢋ button to select White Tone and press the ꢈ or ꢉ button

to enter the sub menu. You can select Personal, Cool, Standard or

Warm settings by using the ꢈ or ꢉ button. To adjust the color

tone of the picture by using the ꢊ or ꢋ button to select Red(R),

Green(G) or Blue(B) and the ꢈ or ꢉ button to adjust levels.

These settings will be stored in personal mode automatically.

disconnect the monitor from the power supply).

Download from Www.Somanuals.com. All Manuals Search And Download.

PYLE Audio Stereo Amplifier PTAU45 User Guide
Quantum Audio Car Speaker QC154 User Guide
Radio Shack Cordless Telephone 43 5829 User Guide
Roland Musical Instrument RD 300SX User Guide
Salton Juicer JE 1013 User Guide
Samson Music Mixer XM 410 User Guide
Samsung Air Conditioner CHCEAM User Guide
Sanyo Cell Phone RL 4920 User Guide
Sanyo CRT Television CE27LD4 B User Guide
Sanyo Projector HF15000L User Guide