INSTRUCTION MANUAL
Colour Television
CE27LD4-B
CE27LD4BK-B
CE32LD4-B
CE32LD4BK-B
Please read this Instruction book before using your television.
We wish you many hours of pleasure from your new television.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety, but
improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe
the following basic rules for its installation, use and servicing.
Installation
Use
Do not allow anything to rest on the power
cord. Do not locate this television receiver
where the cord will be damaged by people
walking on it.
This television receiver should be operated only from the type of
power source indicated on the television or as indicated in the
Operating Instructions. If you are not sure of the type of power
supply in your home, consult your sales person or your local
power company.
Do not overload wall outlets and extension
cords as this can result in fire or electric
shock.
Never add accessories that have not been specifically designed
for this television.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation to ensure reliable operation and to protect
it from overheating. These openings must not be blocked or
covered. The opening should never be covered with a cloth or
other material, and the bottom openings should not be blocked
by placing the television receiver on a bed, sofa, rug, or other
similar surface.
Do not drop or push objects into the television cabinet slots or
openings. Some internal parts carry hazardous voltages and con-
tact may result in an electric shock hazard. Never spill liquids of
any kind on the television receiver. Do not place items such as
vases containing liquid on top of the TV set.
Do not expose the television receiver to rain or use near water.
For example, near a bathtub, kitchen sink, in a wet basement, etc.
Do not use immediately after moving the television from a low
temperature to a high temperature environment, as this causes
condensation, which may result in fire, electric shock, or other
hazards. Before cleaning, unplug the television receiver from the
wall socket.
Do not place this television near any heat sources such as
radiators, heaters, stoves and other heat-generating products
(including amplifiers).
Do not place the television in direct sunlight.
Do not place your television receiver on an unstable stand, shelf
or table. Serious injury to an individual, and damage to the
television may result if it should fall. Your sales person can
recommend approved stands or shelf and wall mounting
instructions. A special wall mounting kit is available for this model.
Never stand on, lean on or push the
television or its stand. Never allow
children to play with the television or
its stand. Serious injury may result if
it should fall.
MINIMUM DISTANCES
5cm
Do not apply liquid cleaners or
aerosol cleaners directly onto the
television receiver. Use a damp cloth
for cleaning.
10cm
10cm
10cm
If the television is built into a unit, or enclosed, the minimum
distances for ventilation must be maintained. Heat build up can
reduce the life of your television, and can be dangerous.
Do not place candles or hot objects
upon the TV, next to it or behind it.
Open flames must never be used
near the TV set.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Important:
This equipment is fitted with an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows:
1. Remove the fuse cover and fuse.
2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type.
3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains
a fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5 Amp.
Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the following code:
Blue -------> Neutral
Brown ----> Live
1. The Blue wire must be connected to the terminal whichis marked with the letter “N” or coloured BLACK.
2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.
3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.
THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.
Care of your product
Important recycling information.
● Cleaning your LCD screen.
Your SANYO product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
Your LCD screen is coated in a non reflective film. Damage to
this film will result in possible discolouration. Any scratches will
not be repairable.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.
Clean your screen with a soft cloth, only rub lightly, do not use
detergents.
Do not stick anything to the screen, use solvent or alcohol
based cleaners, hit the screen with a hard object or rub the
surface hard.
Please dispose of this equipment at your
local community waste collection/recycling centre.
In the European Union there are separate collection systems for
used electrical and electronic products.
● Placement of your LCD TV.
Table top stand
This LCD TV is supplied with a table top stand fitted. This stand
can rotate 360˚ to the left or right.
To rotate your TV hold the base and gently push the edge of the
TV.
Please help us to conserve the environment we
live in!
Note: This symbol mark and recycle system are applied only to
EU countries and are not applied to other countries of the
world.
Wall mounting bracket
An optional wall bracket is available for your LCD TV. Before you
consider wall mounting this TV, check that you have an appropri-
ate wall made from solid materials such as concrete or bricks.
You will have to remove the table top stand to use this.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Step : 1 Connections ( Essential)
Step : 2 Remote control battery installation
1. Connect your aerial cable socket to the back of the TV set. Fit the
aerial cable as shown or as shown below when AV equipment is
connected.
● Connecting DVD / VCR player/ Satellite receiver or
Set top box.
We recommend that you connect all other equipment before Plug and
Play. The following examples are our recommended standard connec-
tion.
LCD TV
L/S
R/D
Install two "AAA" 1.5 volt batteries so that the "+" and "-" marks on
the batteries match the "+" and "-" marks inside the unit into the
remote control handset.
AV2
OUT
IN
VCR
Set top box
or
Satellite
OUT
IN
TV
VCR
For satellite
only
DVD
For further information please consult your local dealer.
2. Connect the power cord of the LCD TV to a wall outlet.
AC Mains Outlet
✐ The TV set is prepared for a mains voltage AC220~240V, 50Hz. To
disconnect completely from the mains or, when the TV set is not to
be used for an extended period of time, it is advisable to discon-
nect the power cord from the power outlet.
✐ For all aerial problems please consult your local dealer.
WARNING! High voltages are used in the operation of
this set. Refer service to qualified service personnel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Terminals
Step : 3 Switching on / Plug & Play
The LCD TV will have a red Standby light to
show there is power.
Press the standby button to start Plug and
Play.
P
The self-automatic tuning system called Plug and Play will start. The
TV scans the analogue channels first and then switches to digital
channel mode and scans digital channels. This could take up to 15
minutes. During automatic tuning, the TV displays the tuning status of
analogue and digital channel tuning on the screen.
Thank you for purchasing your SANYO TV.
Now I am searching and storing all programmes.
Analogue Set-up completed
Please wait.
Next digital Set-up is starting
Scan for channels
Scan for channels
Channels found
0
Channels found
55
The scan will take approximately 3 minutes
RET
1. Front of LCD TV
In progress
Stop
OK
Done
Save
Standby switch
Standby Power indicator.
Press OK(on remote control only) to save.
All channels
1
2
3
4
5
6
7
8
9
BBC ONE
BBC TWO
ITV 1
Channel 4
five
ITV 2
BBC THREE
Teletext
BBC FOUR
+
P
-
Press the 5 or 6 button to increase or decrease the programme
position.
10 Sky Travel
11 UK History
12 Ch 14
Press the 1 or 2 button to increase or decrease the sound
volume.
13 CH 15
14 QVC
15 TV Travel Shop
OK
RET
Watch TV
Cancel
3. Left side terminals
✐
✐
To select the AV4 mode press the v button repeatedly.
Press OK(on remote control only) to Watch TV.
When the headphones are inserted the sound from the TV
speakers is muted.
Now the installation is complete!
After Plug & Play, Digital channels are stored in the programme
positions shown in the All channel table.
Analogue channels will be automatically sorted as follows:
3.5 mm Mini Headphone din
AV4 Video in
Programme position 1 : BBC1
Programme position 2 : BBC2
Programme position 3 : ITV
Programme position 4 : CH4 or S4C
Programme position 5 : CH5
Programme position 6 : ITV2
AV4 Left Audio in
L/S
AV4 Right Audio in
R/D
Programme position 7 : channels in order found.
✐
✐
✐
If any other channels are available in your reception area, the
remaining channels will be stored from programme position 7 in
sequence as found.
If you move to another city or cable is installed, please follow the
description “Channel List - scan for channels”. (on page 11) or
“Preset Menu” (on page 16) for Analogue channels.
This procedure only appears the first time you switch on.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL - Digital Use
Sound mute
To switch the sound from the speakers.
The sound changes as follows;
Normal volume -> Half volume -> Mute
Screen mode selector
To select the screen mode, AUTO, NATURAL,
ZOOM14:9, TITLE IN 14:9, ZOOM 16:9,
TITLE-IN 16:9, FULL or NORMAL.
Standby/Power on/off
To switch the TV on and off. Also see page 19.
D/A selector
To switch between analogue and digital channels.
Digital Shot button
Press to capture up to 12 pictures and view
using the CS button.
DS
System selector
To select the colour system in the AV mode,
AUTO,PAL or NTSC.
TV/AV switch
To switch from Digital TV, AV1, AV2, AV3 or
AV4 mode press repeatedly.
Programme up and down
To select the next programme number or
previous programme number.
CS button
Press button to display digital shot pictures and to
enter and exit the Album.
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons for example
for channel 23, press 2 and 3 numeric
buttons.
Coloured buttons
Some channels have interactive services.
Use the red button to enter and other colours as
directed. Also used in menu functions.
MENU
To switch on the screen display menu on/off.
See page 8.
Return
Returns back to previous screen in menu.
Exits interactive mode.
Cursors
To select the sub menu items in the
menu display, Up, Down, Left, Right.
Volume up/down
To adjust the sound level.
OK
To save the setting in the menu, or to call up
the All channel table.
Guide
To call up the Digital TV schedule guide display on
the screen. (refer to page 13).
INFO
Shows the current and next programme on
the selected channel. (refer to page 13).
Surround mode selector
To select the surround mode, ACTIVE,
MONO or OFF.
Picture mode selector
To access a series of picture modes:
PERSONAL, STANDARD, and
DYNAMIC.
Subtitle
Displays sub titles On and Off.
You may need to switch to title in by pressing
WIDE button. See page 20.
Bass selection
To get an emphasised bass sound, ON or OFF.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL OPERATION
User Lists
You can set up different user lists to allow quick access to your
favourite channels.
Main menu
The main menu screen takes you
Main Menu
to many functions in the TV. The
buttons below are the main buttons
and their uses.
Picture
Sound
User lists
■ Setting User Lists
Your TV lists
1. Press the MENU button to select
main menu.
Parental lock
Configuration
Channel list
Technical information
Timer recording
Off Timer
List 1
MENU button - Enters and exits
menus.
List 1
List 1
List 1
List 1
List 1
2. Select User Lists by pressing the
dbutton.
Button eand dmoves up and
down in each selected menu.
List 1
List 1
TV settings
3. Select Your TV lists menu by
pressing the 8button.
Button 7changes levels, moves to
the left and returns to previous
menu.
List 1
1
2
Free slot
4. Select a List eg. List 1 by pressing
the eor dbutton. Enter by
pressing the 8button.
3
4
5
6
7
8
Button 8changes levels, moves to the right and enters next menu.
9
10
RETURN button - Returns to the previous screen.
5. Press the 8to add channels to
your list. Use the eor dto high-
light channel selection. Press the
OK button to add to your list, a X
will appear next to the channel.
11
12
Picture menu
Add channels
Move selection
Rename list
R
Remove
Swap
G
B
Y
OK Save
Refer to bar at bottom of screen for added help in which buttons to
use.
List 1
All channels
1
2
3
4
5
6
7
8
9
BBC ONE
BBC TWO
ITV 1
Channel 4
five
ITV 2
BBC THREE
Teletext
BBC FOUR
X
BBC ONE
Press the 7 or 8button and select Picture menu, set the picture
settings for your personal preference.
6. Repeat to add all the channels
you want in your list.
Free
7. Press the Blue button to save
selection.
Picture
10 Sky Travel
11 UKHistory
12 Ch 14
Brightness
Contrast
Colour
38
42
13 CH 15
8. Add more channels, move
selection, rename list, remove or
swap or press the OK button to
finish the list or the MENU button
to exit.
OK
B
Select
Save
19
2
Sharpness
Memory
OK? / OK
List 1
BBC ONE
Free
1
BBC ONE
BBC TWO
ITV 1
Channel 4
five
ITV 2
BBC THREE
BBC FOUR
UKHistory
2
3
4
5
6
7
8
9
Use the e or d button to select eg. Brightness and the 7 or 8
button to adjust levels.
■ Move selection.
To change the order of channels in
your list.
Use the e or d button to select and the 7 or 8 button to set.
To memorise these settings press the OK button. (The OK? will
change to OK.)
1. Select the channel you wish to
move using the eor dbutton.
G
Put here
To exit press the MENU button.
2. Press the Green button to select the channel.
Sound menu
3. Use the eor dbutton to move to a different position
Press the MENU button and select Sound menu by pressing the 7
or 8 buttons.
4. Press the Green button to save the new order.
Repeat steps 1-4 until all channels are in the order you need.
Select and adjust to obtain the best sound settings for your environ-
ment using the e or d and 7 or 8buttons.
5. Add more channels, move selection, rename list, remove or swap
or press the OK button to finish the list or the MENU button to
exit.
Sound
Volume
Bass
12
0
■ Rename List.
Treble
Balance
BBE
0
1. Press Blue button to rename your list. see picture.
0
ON / OFF
Rename list
?
Press the MENU button to return to Main Menu. These settings
automatically store when you exit the menu.
OK
RET
Cancel
Choose letter
Save
Press the MENU button repeatedly to exit menu.
2. Use the 7or 8button to move left or right.
3. Use the eor dbutton to choose a letter, symbol or number. (A-Z,
0-9, -,+ etc.)
4. Press the OK button to save new user list name.
5. Add more channels, move selection, rename list, remove or swap
or press the OK button to finish the list or MENU button to exit.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL OPERATION
■ Remove a channel.
5. Select New code by pressing the dbutton, and enter your new
code eg. 4 3 2 1.
1. Highlight a channel to be removed.
6. Select Confirm new code by pressing the dbutton, and re-enter
the code 4 3 2 1.
2. Press the Red button and it will be deleted, the screen shows a
red line through it. To deselect a deleted channel press the Red
button again.
7. If you are happy with the new code press the OK button to select.
A prompt Save new code? will appear. Press the Red button to
confirm.
✐ Red button refers to coloured buttons Red, Green, Yellow and
Blue. Do not get confused with larger Red Standby button.
✐ If Invalid code! appears you have entered the incorrect old code.
Press the RETURN button and try again.
3. Add more channels, move selection, rename list, remove or swap
or press the OK button to finish the list or the MENU button to
exit.
Press the MENU button to return to normal picture.
● To activate parental lock.
■ Swap channels.
1. Press the MENU button to select Main menu.
1. Choose a channel that you wish to swap with another by pressing
the eor dbuttons . Press the Yellow button to enter the Swap
screen.
2. Using the eor dbutton select Parental lock. Press the 8button
to enter.
Swap
?
3. Enter your code and press the OK button to save. If wrong code
is entered Invalid code! will appear and you have to repeat 1-3
again.
OK
RET
Cancel
Save
2. Use the 7, 8 and numeric buttons to enter channel number
and press the OK button to swap.(When in swap screen you can
press the RETURN button repeatedly to take you back a screen).
Enter parental code
?
OK
RET
Cancel
Save
3. Add more channels, move selection, rename list, remove or swap
or press the OK button to finish the list or the MENU button to
exit.
✐ Parental lock is now activated you will now have to enter the code
every time before you can enter Main menu unless parental lock
is deactivated. See page 8.
4. Press the MENU button to return to normal picture.
● Blocking access to selected channels.
Using User Lists
1. Press the MENU button to select Main menu.
When watching a digital channel. Press the 8button. A title bar
appears at the bottom of the screen with each press of the 8button
it will select All channels and all your set user lists.
2. Using the eor dbutton select Channel List. Press the 8button
to enter.
Channel list
1 BBC ONE
2 BBC TWO
All Channels
MY LIST 1
Lock channels
Scan for channels
3. Select Lock channels using the eor dbutton. Press the 8
button to enter.
Use the eor dbuttons to browse through the list, the TV will switch
to this channel. (Only channels in the selected list will be browsed).
Lock channels
BBC ONE
All channels
1
2
3
4
5
6
7
8
9
BBC ONE
BBC TWO
ITV 1
Channel 4
five
ITV 2
BBC THREE
Teletext
BBC FOUR
Parental lock
Parental lock can be used to block entry into the Menu functions and
to allow you to block access to selected channels.
10 Sky Travel
11 UK History
12 Ch 14
13 CH 15
14 QVC
The first time you use this function the code numbers are 1 2 3 4.
If you forget the code there is a default code 6 9 3 1 this will always
give you access to Parental lock.
15 TV Travel Shop
Y
OK
Save
Parental lock
● How to change the code to your own preference.
4. Using the eor dbutton select a Channel you wish to lock.
1. Press the MENU button to select Main Menu.
5. Press the Yellow button, a locked symbol will appear to show it is
selected. To de-select press the Yellow button again. Repeat
until all channels you wish to lock are selected.
2. Using the eor dbutton select Configuration and press the 8
button to enter.
3. Press the dbutton to select Change parental code. Press the 8
button to enter.
Edit channel list
BBC ONE
All channels
BBC ONE
BBC TWO
1
2
4. Enter Old code into yellow box which is highlighted, using the 0-9
numeric buttons (If this is the first time you have selected this
function it will be 1 2 3 4). Use the 7button to go back and re-
enter an incorrect digit.
6. Press the OK button to Save.
This takes you back to Channel List Menu.
Change parental code
To return to normal picture press the MENU button.
Old code
* * * *
New code
* * * *
Confirm new code
* * * *
OK
RET
Cancel
Select
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL OPERATION
Language choice
Parental lock
Audio:
● How to watch a locked channel.
First language
English
Welsh
Second language
1. Select a locked channel, Parental lock display appears.
Subtitling:
First language
Second language
Subtitle display
English
Welsh
On / Off
Parental lock
!
OK
RET
Cancel
Save
Subtitling - Select your preferences as required.
1
BBC ONE
All Channels
If you wish for Welsh or Gaelic Subtitles instead of English to be
shown (when available) then select your preference for the first
language.
2. Press the OK button, enter the Parental code and press the OK
button again.
Example: as shown will give you English first language, if not
available Welsh may be shown.
Enter parental code
?
OK
RET
Cancel
Save
5. To change press the e or dbutton to highlight the box and
press the 7 or 8 button to select your preferred First language
and repeat for Second language.
3. The channel is temporarily unlocked until the channel is changed.
4. Press the MENU button to return to normal TV picture.
6. Press the dbutton to select Subtitle display. This can be set ON
or OFF by pressing the 7 or 8button.
✐ If Parental lock is activated and you wish to record this locked
channel, deactivate first before setting timer recording.
7. Press the OK button to Save.
● To deactivate parental lock.
This takes you back to Configuration menu screen.
Change Parental Code - See page 9 under Parental lock.
Press MENU to return to normal TV Picture.
1. Press the MENU button to select Main menu.
2. Enter the Parental code.
3. Press the OK button to enter menu functions.
● Common Interface
4. Use the eor dbutton to select Parental unlock, press the 8
button to enter.
This TV set provides a common Interface slot located behind a door
on the rear of the TV set on the left side.
5. Press the Red button to deactivate.
Deactivate parental lock
C I
!
OK
RET
Cancel
Select
6. Press the MENU button to exit.
✐ Main menu screen will show either Parental Lock or Parental
Unlock ( if it is use).
✐ Once you have activated Parental Lock each time you need to
enter the Main Menu you will need the code.
1. Insert the card in the slot located on the top of the TV.
Configuration
2. Press the MENU to select Main Menu.
● Preferred language.
3. Select Configuration by using the e or dbutton. Press the 8
button to enter.
1. Press the MENU button to select Main Menu.
2. Select Configuration by using the e or dbutton. Press the 8
button to enter.
4. Press the dbutton to highlight Common Interface and press the
8 to enter.
Common Interface
Reader 1: Interface card
3. Press the dbutton to highlight Preferred language and press
the 8button to enter.
Configuration
Prefered language
Change parental code
Common Interface
OK
RET
Cancel
Select
The following screen appears to show that a card is inserted.
When you select OK, follow the on screen directions. This will vary
depending on the type of card inserted.
Audio - Select your preferences as required.
Example. If you speak Welsh (Gaelic) and prefer to receive Welsh
(Gaelic) audio when it is transmitted then select Welsh (Gaelic) for
your first Language and English as your second.
Important!
The TV should be turned off by the Mains Power switch when insert-
ing or removing the Common Interface Card, otherwise it may cause
damage to the card or the TV set.
4. Press the 7or 8button to select Language, press the eor d
button select second language and change your preference using
the 7or 8button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL OPERATION
Technical Information
Channel List
In this section a lot of the information will only be useful to a techni-
cian. Some parts are however useful to you. If there is an upgrade in
software you will need this section to upgrade your TV from time to
time.
● Edit channel list
1. Press the Menu button to select Main Menu.
2. Select Channel List by using the eor dbutton. Press the 8to
enter.
1. Press the Menu button to select Main Menu.
2. Select Technical Information menu by using the eor dbutton.
Channel list
Press the 8button to enter.
Lock channels
Scan for channels
Technical information
Signal information
Software upgrade
Product data
Reset
3. Select Lock channels by using the eor dbutton. Press the 8
button to enter.
Lock channels
BBC ONE
All channels
1
2
3
4
5
6
7
8
9
BBC ONE
BBC TWO
ITV 1
Channel 4
five
ITV 2
BBC THREE
Teletext
BBC FOUR
3. Select Signal information by using the eor dbutton and press
the 8button to enter.
Signal information
BBC THREE (BBC)
Free
DVB Identifiers (9018,4103,4351)
Channel 63
10 Sky Travel
11 UK History
12 Ch 14
Signal strength (%) 34
Bit error rate
13 CH 15
14 QVC
Uncorrected errors/sec
OK
RET
Cancel
Select
15 TV Travel Shop
This screen cannot be altered but if you have a problem you may
need to refer to this screen for some data.
Y
OK
Save
Parental lock
4. To delete channels from this list use eor dbutton to highlight a
channel.
4. Press the Return or the OK button to go back to Technical infor-
mation screen.
5. To lock or unlock parental locked channels, select the channel and
press the yellow button. This will lock or unlock the channel.
■ Software upgrade
1. Press the dbutton to select Software Upgrade screen. Press
the 8button to enter.
6. Press the OK button, selected channels will be locked / unlocked
and parental lock/unlock stored.
Software upgrade
You will go back to Channel List menu.
● Scan for channels
Looking for new version.......
RET
Cancel
1. Press the Menu button to select Main Menu.
2. Select Channel List by using the eor dbutton.
This looks for any new software upgrades that maybe transmitted at
any time.
2. Press the Return button to go back to Technical information
screen.
3. Press the dto select Scan for channels. Press the 8to enter.
Scan for channels
Channels found
3. Select Product Data by using the eor dbutton and press the 8
to enter.
0
Product data
The scan will take approximately 3 minutes
Product LDITPGFTG_01_00
Software 1.9.76 build jun 25 2003 16:10:15
Resourse 1.26.3
RET
In progress
Stop
Boot
2.4.0
RET
This will scan all available channels. This is a useful function if you
delete channels and want to get them back later.
Cancel
This is useful to service engineers.
4. Press the OK button to save (All Channels).
4. Press the Return button to go back to Technical information
screen.
5. Press the OK button again to watch normal TV picture.
5. Press the dbutton to select Reset screen. Press the 8button to
enter.
✐ Parental lock is still saved after the scan for channels has been
initialised.
Reset receiver configuration?
!
RET
R
Cancel
Confirm
If you press Red button to confirm it will return all settings to factory
(default) mode for digital channels. To start a scan for all available
channels switch the TV set Off and On again and press D/A button
to select digital.
When the TV set has been initialised press the OK button to Save
and the OK button to watch TV picture.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL OPERATION
You can either press the Red button and delete, press the Green
Timer recording
- This feature is used when you wish to record a digital channel on
your VCR.
button and the channel will change at the due time, press the Yellow
button to change to the channel now or press the Blue button to
cancel settings.
- In order to record digital channels you cannot watch another digital
channel when recording. Digital channels are recorded using AV2.
- Timer recording will switch your TV set to the digital channel at the
preset time until the finish time is reached.
- Whilst timer recording is running you can switch to Analogue TV.
- You can also switch your TV into Standby mode, the timer recording
will switch your TV on and off back into Standby when finished.
✐ If you want to switch to another digital channel you must first
cancel recording by pressing the Return button.
Timer menu
■ Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time has elapsed.
✐ If you want to switch to another digital channel you must first
cancel recording by pressing the Return button.
1. Press the MENU button and select Main Menu.
✐ If channel has been locked (Parental lock) and you have set timer
record for locked channel it will not record. You have to deactivate
parental lock first.
2. Press the d button and select Off Timer. Press the 8 button to
enter.
1. Press the Menu button to select Main Menu.
3. Select Timer using the 7 or 8button. Select OFF Timer using
the e or d button. The complete line turns yellow.
2. Select Timer recording menu by using the eor dbutton. Press
4. Press the 7 or 8 button to select --:-- (highlighted yellow).
5. Press the e or d button to change time.
the 8to enter.
Current events
Channel
Date & time End
1
2
3
4
5
6
7
8
9
(not set) --/--/-- --:-- --:-- (not set)
(not set) --/--/-- --:-- --:-- (not set)
(not set) --/--/-- --:-- --:-- (not set)
(not set) --/--/-- --:-- --:-- (not set)
(not set) --/--/-- --:-- --:-- (not set)
(not set) --/--/-- --:-- --:-- (not set)
(not set) --/--/-- --:-- --:-- (not set)
(not set) --/--/-- --:-- --:-- (not set)
(not set) --/--/-- --:-- --:-- (not set)
The time changes in 30 minute steps.The maximum time is 2:00hrs.
6. Press the 7 or 8 button to highlight complete line (yellow).
7. Press the OK button to store your settings.
If you have set the off timer, then one minute before the TV switches
off, a display appears on the screen.
10 (not set) --/--/-- --:-- --:-- (not set)
11 (not set) --/--/-- --:-- --:-- (not set)
12 (not set) --/--/-- --:-- --:-- (not set)
✐ If the TV set is switched off by the standby button on the remote
control or by the standby switch on the front of the TV set the
timer settings will be cancelled.
OK
R
RET
Cancel
Edit/Add event
Delete
3. Highlight a row and press the OK button. Set events screen
appears.
Timer
OFF timer
Alarm timer
- - : - -
- - : - -
OK?
Set event
BBC ONE
17/07/03
10:52
Channel
Wake-up day
wake-up time
Finish time
Repeat
Press the MENU button to exit, or press the 7 button to highlight
complete line yellow and then Press the d button to set Alarm timer.
11:28
No repeat
■ Alarm timer setting
OK
RET
Cancel
Save
This function can be set so that an alarm goes off. This only hap-
pens when the TV is switched on. It may remind you to do something.
4. Select channel by pressing the 7 or 8buttons and rotate through
all available channels.
1. Press the MENU button and select Main Menu.
5. Press the dbutton to select and highlight yellow Wake-up day
box. Enter your day, month and year by using numeric buttons (0-
9). and using the 7or 8button to move left and right.
2. Press the d button and select Off Timer. Press the 8 button to
enter.
6. Press the dbutton to select and highlight yellow Wake-up time
box. Enter your time by using numeric buttons (0-9). and using the
7or 8button to move left and right.
3. Select Timer using the 7 or 8 button. Select Alarm Timer using
e or d button. The complete line turns yellow.
4. Press the 7 or 8 button to select --:--.
7. Press the dbutton to select and highlight yellow Finish time box.
Enter your time by using numeric buttons (0-9). and using the 7or
8buttons to move left and right the time you wish to finish.
5. Press the e or d button to change time.
The display changes in 5 minute steps and the maximum time period
is 3:00 hours.
8. Press the dbutton to select and highlight yellow Repeat box.
Press the 7 or 8button to enter No repeat, daily, or weekly.
This would be a useful feature if you have a favourite programme
that you don’t want to miss and it is shown on a daily or weekly
schedule.
6. Press the 7 or 8 button to highlight complete line (yellow).
7. Press the OK button to set the Alarm.
8. Press the Menu button repeatedly to return to normal TV picture.
9. Press the OK button to save settings, you can repeat again or
press RETURN button to go back to Main menu. Press MENU
button to exit.
When the time period is up, the time up signal will appear on the
screen and the alarm will sound for 15 seconds.
To cancel the Alarm timer press any button and the display will
disappear.
Once you have set the timer recording, 5 minutes before the selected
time the following screen appears.
✐ If the TV set is switched off by the standby switch on the remote
control, the standby switch on the front of the TV or a power fail-
ure occurs the timer settings will be cancelled.
Event #1 is due to start in 4
?
minutes. Press YELLOW to switch
now. GREEN to switch on time.
RED to delete the event .BLUE to cancel.
R
G
Y
B
Delete
Due
Now
Cancel
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL OPERATION
Setting menu
Info button
When you press the info button in digital mode you will be displayed a
cut down guide showing only the channel you are currently on.
■ Child lock
You can prevent small children from operating the TV with the side
buttons on the TV set.
Wed 11:44
20/0802003
ITV 1
1. Press the MENU button and select Main Menu.
11:30-12:30
l..........
12:30-12:50
2. Press the d button and select Setting menu. Press the 8 button
to enter.
ITV Lunchtime News
3. Select Setting using the 7 or 8 button and then Child lock using
the e or d button.
Main national & International news
Setting
Child lock
AV2
Guide
Prog+
Now
TV Schedule
Change channel
On / Off
Video / S-Video
Press the 7or 8button to select current programme or next.
Press the GUIDE button to go to the full guide. Press the 5or 6
button to change to the channel.
4. Set the Child lock to OFF or ON by pressing the 7 or 8 button.
✐ The child lock mode will be reset to “OFF” when the TV set is com-
pletely disconnected from the Mains supply.
Programme Download
■ AV2 setting
Once you have started the upgrade process you must not interrupt
it (disconnect or separate it from the mains supply) under any
circumstances. Do not press any key on the remote control or the
front of the cabinet. If you interrupt the upgrade process the IDTV
may be defective afterwards.
In setting menu, to select AV2 press the d button and set to Video or
S-Video depending on your external equipment. If you use a VCR
which has S-VHS, you should connect it to AV2 and change the AV2
menu to S-VIDEO.
1. Press the 7 or 8 button to select.
From time to time upgrades will become available. When this happens
the following screen appears.
2. Press the MENU button to exit, this automatically stores your
changes.
Software upgrade
Download
Press the MENU button or the RETURN button twice to return to
normal TV picture.
X
Version
Date
Guide
The guide shows the digital TV schedule.
OK
RET
Cancel
Start
The guide can show all channels or any set user lists ( see page 8).
To upgrade press the OK button and the following screen will appear.
Press the 8 button to select all channels or a user list then press the
GUIDE button.
Software upgrade
A schedule will appear on the screen.
This will improve your TV’s features
TV Schedule
User list 1
Wed 12:44
20/0802003
Upgrade later
Blue
Upgrade now
OK
RET
Do not upgrade
12:00
XXXX
XXXX
Today
14:00
BBC 1
XXXX XXXX XX
XXXX
XXXX
XXXX
Press the OK button to start, this automatically downloads for you.
The following screen appears.
ITV
XXXX
ITV
Lunchtime News
Channel 4
five
XXXX
Software upgrade
Downloading
XXXX
XXXX
XXXX
XXXX
XXXX
UKHistory
Software details
12:30-12:50
ITV Lunchtime News
Main national & International news
Info
RET
Cancel
In Progress......
Use the eor dbutton to move up and down the channel list. Use
the 7or 8button to highlight the programmes below the transmis-
sion time, progress and a brief programme explanation will be dis-
played.
The following screen appears to show that the upgrade is nearly
finished. Once this screen disappears the upgrade is complete.
Software upgrade
Press the Guide button to return to normal picture.
If this takes longer than 20 minutes
contact your television supplier.
Press the
button to get more information on that programme.
In Progress......
13
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL - Analogue
Screen mode selector
To select the screen mode, Auto, Natural,
Zoom14:9, Title In 14:9, Zoom 16:9,
Title In 16:9, Full or Normal.
Sound mute
To switch the sound from the speakers.
The sound changes as follows;
Normal volume -> Half volume -> Mute
Standby / Power on/off
To switch the TV on and off.
Also see page 16.
Digital Shot button
Press to capture up to 12 pictures and view
using CS button.
D/A selector
To switch between analogue and digital channels.
DS
VCR / DVD controls
Please refer to the table below.
TV/AV switch
To switch from TV, AV1, AV2, AV3 or
AV4 mode press repeatedly.
System selector
To select the colour system in the AV mode,
AUTO, PAL or NTSC.
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons in analogue
and digital. For selection of analogue
programme position 10 - 99, for example 23,
first press -/-- button and press
Programme up and down
To select the next programme number or
previous programme number.
2 and 3 numeric buttons.
CS button
Press button to display digital shot pictures and to
enter and exit the Album.
MENU
To switch on the screen display menu on/off.
Also see page 12.
Volume up/down
To adjust the sound level.
Cursors
To select the sub menu items in the
menu display.
Picture mode selector
To access a series of picture modes:
PERSONAL, STANDARD, ECO and DYNAMIC.
OK
To save the setting in the menu.
(also refer to CS button).
Nicam / Bilingual selector
To switch the sound mode as follows; NICAM or MONO
in the stereo programmes. A or B in the bilingual
programmes. If the nicam or stereo sound reception is
poor in quality, you can switch to MONO sound reception
by pressing A•B button. This operates only analogue
channel mode.
Surround mode selector
To select the surround mode, ACTIVE,
MONO or OFF.
Bass selection
To get an emphasised bass sound ON or OFF.
Teletext / TV selector
To switch TV, MIX and Teletext mode.
■ VCR / DVD controls
With selected Sanyo DVD/VCR players you can use this remote. The
following table shows all available function buttons for the VCR and
DVD. When you use a compatible Sanyo DVD player, first press and
hold the DVD button and then press your desired function button.
VCR
Power
DVD (blue symbols)
Power
Play
Pause
Play
Pause
Stop
Fast/Cue
Rewind/Review
Stop
Next chapter selection
Previous chapter selection
Record, press both buttons at the same time.
DVD
OK
n/a
n/a
DVD command mode selection
Enter
Cursor selection
n/a
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION - Analogue channels
Many of your TV’s functions are controlled through the menu function.
MENU
Sound menu
Picture
Brightness
Contrast
Colour
Press the MENU button and select Sound menu by pressing the 7
or 8 button.
Sharpness
Tint (only if NTSC equipment is detected)
Text brightness
Memory
Select and adjust to obtain the best sound settings for your environment
using e or d and 7 or 8 button.
Sound
Volume
Bass
Treble
Balance
BBE
Sound
Timer
Volume
Bass
Treble
Balance
BBE
12
0
0
0
ON / OFF
OFF Timer
Alarm Timer
To exit press MENU button.
Setting Child lock
AV2
ON/OFF
Video/S-video
ON/OFF
Timer menu
Noise Reduction
Preset
Auto Tuning
Auto
Channel
Position
■ Off-timer setting
Auto sort
Prog. Preset
Swap
Start
The Off timer will switch the TV set into the standby mode when the
selected time has elapsed.
Semi
Channel
Fine Tuning
Position
Skip
Memory
1. Press the MENU button and select Timer using 7 or 8 button.
Select OFF Timer using the e or d button. The complete line
turns yellow.
During menu operation a bar at the bottom of the screen show which
controls can be used.
2. Press the 7 or 8 button to select --:-- (highlighted yellow).
3. Press the e or d button to change time.
eg.
The time changes in 30 minute steps.The maximum time is 2:00hrs.
4. Press the 7 or 8 button to highlight complete line (yellow).
5. Press the OK button to store your settings.
If you have set the off timer, then one minute before the TV switches
off, a display appears on the screen.
Timer
OFF timer
Alarm timer
✐ If the TV set is switched off by the standby button on the remote
control or by the standby switch on the front of the TV set the
timer settings will be cancelled.
Press the ubutton to enter and exit the 5 sub menus Picture,
Sound, Timer, Setting and Preset.
Press the MENU button to exit, or press the 7 button to highlight
complete line yellow and then press the d button to set Alarm timer.
When a sub menu is selected its options are displayed and its colour
will change to yellow.
Timer
OFF timer
Alarm timer
- - : - -
- - : - -
OK?
When you have set each Sub menu you can either press the MENU
button to exit and clear the screen or press the 5 button until the
sub menu is re-selected. Using the 7,8 button you can rotate again.
■ Alarm timer setting
Picture menu
This function can be set so that an alarm goes off. This only hap-
pens when the TV is switched on. It may remind you to do something.
Press the 7 or 8button and select Picture menu, set the picture
settings for your personal preference.
1. Press the MENU button and select Timer using the 7 or 8
button. Select Alarm timer using the e or d button. The complete
line turns yellow.
Picture
Brightness
Contrast
Colour
38
42
19
2
2. Press the 7 or 8 button to select --:--.
Sharpness
Tint
3. Press the e or d button to change time.
27
Minimum/Centre/Maximum
Text brightness
Memory
The display changes in 5 minute steps and the maximum time period
is 3:00 hours.
OK? / OK
4. Press the 7 or 8 button to highlight complete line (yellow).
Use the e or d button to select eg. Brightness and the 7 or 8
button to adjust levels.
5. Press the OK button to set the Alarm.
When the time period is up, the time up signal will appear on the
screen and the alarm will sound for 15 seconds.
Tint : is only available if NTSC equipment is connected.
Text brightness : you can set to Minimum, Centre or Maximum.
Use the e or d button to select and the 7 or 8 button to set.
To cancel the Alarm timer press any button and the display will
disappear.
To memorise these settings press the F/OK button. (The OK? will
change to OK.)
✐ If the TV set is switched off by the standby switch on the remote
control, the standby switch on the front of the TV or a power failure
occurs the timer settings will be cancelled.
To exit press the MENU button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION
After completing this procedure, the TV set returns to programme
position “01”.
Setting menu
Position changes sequentially as channels are found.
To cancel this tuning operation, press the MENU button repeatedly.
Setting
Child lock
On / Off
Min / Med / Max / OFF
Video / S-Video
Noise Reduction
AV2
✐ You can change the order of the station selection, by using the
channel swapping function detailed later.
■ Auto Sort
■ Child lock
1. Press the MENU button.
You can prevent small children from operating the TV with the side
buttons on the TV set.
2. Select Preset, press e or d button select Auto sort and press 8.
3. Press the OK button to start automatic sorting and storing of TV
stations in your area. It will sort the channels as in Plug and Play
(See page 6).
1. Press the MENU button and select Setting using the 7 or 8
button and Child lock using the e or d button.
2. Set the Child lock to OFF or ON by pressing the 7 or 8 button.
Auto sort
✐ The child lock mode will be reset to “OFF” when the TV set is
completely disconnected from the Mains supply.
Start
OK?
To cancel press Menu button repeatedly.
■ Noise Reduction
■ Prog. preset.
1. Press the MENU button and select Setting using the 7 or 8
button and Noise Reduction using the e or d button.
This is used to preset a received channel in any desired programme
position.
2. Set to Min, Med, Max or OFF by pressing the 7 or 8 button.
1. Press the MENU button and select Preset, press the e or d but-
ton and select Prog. Preset.
3. Press the MENU button repeatedly to return to normal TV picture.
2. Press the 8 button to enter Semi menu.
■ AV2 setting
Semi
In setting menu, to select AV2 press the d button and set to Video or
S-Video depending on your external equipment. If you use a VCR
which has S-VHS, you should connect it to AV2 and change the AV2
menu to S-VIDEO.
Channel
Position
Skip
C24
01
OFF / ON
OK?
Memory
1. Press the 7 or 8 button to select.
2. Press the MENU button to exit, this automatically stores your
changes.
3. Select Position by pressing the d button. Press the -/-- button
and enter the position (01-99) using the 0-9 buttons or 7, 8 button
until the position is selected. (eg: to select position 5 press 0 then
5).The selection changes colour to blue, to say that another
channel has been found.
Preset menu
The preset menu can be used to tune new channels, to reorder
channels and their programme positions, and to make fine adjust-
ments to the tuning.
4. Press e to highlight Channel. Press the -/-- button (C--) to enter
the number directly if known. (Please refer to the channel table on
page 17).
You can search for a channel for your selected position. Highlight
Channel, press the 7 or 8 button until a channel is found, if this is
not the one required repeat until it is found (C-- / H--).
Preset
Auto Tuning
Auto Sort
Prog. Preset
Swap
Fine Tuning
✐
The selection changes colour to blue, to say that another
channel has been found.
- -
5. Press the d button and select Memory, press the OK button to
memorise.(The OK? will change to OK).
Press the MENU button to exit.
■ Auto Tuning
●
Skip
1. Press the MENU button and select Preset using the 7 or 8
button. Select Auto Tuning using the e or d button. The
complete line turns yellow.
Skip ON : in normal operation when the 5 or 6 button is
pressed this position will be skipped.
Skip OFF : Position is not skipped when the 5 or 6 button is
pressed.
2. Press the 8 button and select Auto.
1. Press the MENU button and select Preset, press the e or d
button and select Prog. Preset.
Auto
Channel
Position
C31
01
2. Select Channel that you wish to be skipped or the Position. Select
Skip and choose ON by pressing the 7 or 8 button.
3. Press the 8 button to start, all available channels are automatically
stored, starting from programme position 01.
3. Select memory. Press the OK button to store.
✐ You can still view a programme position that has been skipped by
using the numeric buttons to select the programme position directly.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION
■ Channel table.
Preset menu
The table below shows the receivable channels and channel
allocation for this LCD TV set.
Preset
Auto Tuning
Auto Sort
Prog. Preset
Swap
- -
C75
C76
C77
C78
C79
C80
C81
C82
C83
C84
C85
C86
C87
C88
C89
C90
C91
C92
C93
C94
C95
C96
C97
C98
C99
X
Y
X
Y
Z
69.25
76.25
83.25
90.25
97.25
C
C
C
C
C
C
C
C
C
1
2
3
4
5
6
7
8
9
43.25
48.25
55.25
R3
R4
R5
A
A
B
D
E
F
E2
E3
E4
E5
E6
E7
E8
E9
R1
Fine tuning
C/Z
Z+1
Z+2
S1
S2
S3
S4
S5
S6
S7
Z+1
Z+2
S1
S2
S3
S4
S5
S6
S7
R2
R6
R7
R8
R9
62.25
175.25
182.25
189.25
196.25
205.25
210.25
217.25
224.25
105.25
112.25
119.25
126.25
133.25
140.25
147.25
154.25
161.25
168.25
231.25
238.25
245.25
252.25
259.25
266.25
273.25
280.25
287.25
294.25
■ Swap
G
H
H1
H2
C10
C11
C12
E10
E11
E12
R10
R11
R12
Use this channel swapping feature to swap the channels between two
stored programme positions. This feature is particularly useful after
automatic tuning.
S8
S9
S8
S9
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C25
C36
C37
C38
C39
C40
C41
C42
C43
C44
C45
C46
C47
C48
C49
C50
C51
C52
C53
C54
C55
C56
C57
C58
C59
C60
C61
C62
C63
C64
C65
C66
C67
C68
C69
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
E21
E22
E23
E24
E25
E25
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
623.25
631.25
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
S1S
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
You have to choose a programme that you wish to swap on the TV
set. eg. Swap programme position 4 and 12.
1. Select programme position eg.4.
H21
H22
H23
H24
H25
H26
H27
H28
H29
H30
H31
H32
H33
H34
H35
H36
H37
H38
H39
H40
H41
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
303.25
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
2. Press the MENU button and select Preset using the 7 or 8
button. Select Swap by pressing the e or d buttons.
3. Enter the new position eg.12. Press 1 and 2 numeric buttons.
4. Press the OK button to store, the number disappears.
5. Press the MENU button to exit and they are swapped.
■ Fine tuning
1. Press the MENU button and select Preset using 7 or 8 buttons.
2. Press the e or d button and select Fine tuning.
3. Press and hold the 7 or 8 button to fine tune channels.
The tuning will be stored when you exit the menu. Press the MENU
button to exit.
Any changes made by fine tuning will remain even when the TV set is
switched off by Mains Switch, until the channel has been retuned.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT OPERATION - Analogue channels
DS
Standby/Power on/off
To switch the TV on and off.
Direct access to a page
All the numeric buttons can be used
to select a page number directly.
If you need page 301, press 3 then
0 then 1.
Reveal switch
This reveals hidden items on the teletext
page eg: a hidden answer to a quiz question.
Sub page access
Some text pages are made up of several
sub pages which rotate automatically if
you wish to view P4 of 8 press the sub page
button. “----” will appear. Enter 0004.
Page up and down
To select the next page number or
previous programme number.
Direct access to subject headings
Coloured boxes are displayed at the bottom
of the screen. The 4 coloured buttons give
access to the corresponding subjects or pages.
Cancel
To view the TV picture in the teletext mode
while waiting for sub page to change or
page to update.
Note. the page number will appear if the
page is updated.
Index page selector
To call up the Index pages.
eg. P100.
Up / down page access
Press the button to select the next page
or previous page number.
Teletext/TV selector
To switch TV, MIX and Teletext mode.
Size switch
This will make either the top half or
the bottom half of the page expand
to fill the whole screen.
Stop
This stops the sub pages from changing.
The word “STOP” will appear instead of
the page number.
Teletext
Teletext - This is a free service to give you lots of varied informa-
tion such as news, sports results, weather and travel features.
Teletext reception
If your aerial signal is poor, the teletext reception operation may be
erratic.
Teletext brightness level
You can change the teletext brightness level. Please return to TV
mode.(See Picture menu -Text Bright on page 15).
Sound volume control
In teletext mode sound volume and muting can be controlled.
However they are not displayed on the screen.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ANALOGUE AND DIGITAL OPERATION
■ Switching into / from standby mode
Digital shot function
The Standby mode is used for switching the TV set off for short
periods of time. In standby mode the TV is switched off but is
still receiving mains power.
The Digital shot function allows you to capture and store up to 12
pictures in an album. You can view them as a slide show or
individually.
● To turn the TV set into standby mode, press the 4 button.
■ How to capture a picture in Digital shot
The red power indicator illuminates more brightly.
● To turn the TV set ON from standby mode, press any of the
Press the DS button on the remote control to capture the picture.
1 / 12 will appear on the screen and the picture will be stored in the
Album. The album can store up to 12 pictures.
following buttons: 4
5, 6 or 0-9 buttons.
,
If you find the power indicator flashing, please turn the TV
set off with the Standby switch and disconnect the power
cord from the power outlet and contact our Service desk.
Album
1
This warning is a sign to let you know that the power
protection function of this TV set is now operating.
:
:
Delete All
:
Delete
■ Auto shut off
Auto Album
OK : Select
CS : Exit
This TV set will automatically switch into the standby mode, 10
minutes after a signal is no longer received. The time until the
set will switch off is displayed on the screen.
■ How to view pictures in Digital shot
Press the CS button to view the picture Album.
Use the cursors 7, 8, e, d to highlight a picture for selection.
Press the OK button to display a full screen.
■ Use of Audio Output Jacks
This TV provides the audio monitor output jacks on the left side
of the cabinet. You can connect your audio equipment to these
jacks to give you sound with your audio equipment.
Use the cursors 7, 8 to cycle through the picture.
Press the OK button to show the menu or the Blue button to return
to Album.
To audio equipment
● Auto Album
Press the Green button to select Auto album. A slide show will begin
from the highlighted picture. eg. 1-2-3-1-2-3.
If you wish to stop while auto album is activated press the green but-
ton and it will stop.
L/S
R/D
To reactivate press the Green button again.
Press the Blue button to return to view digital shot pictures (Album).
Press the CS button to return to normal TV picture.
AV2
AV1
AV3
● To delete
Press the Red button to Delete all saved pictures.
Select a picture already saved, then press the yellow button to
delete a single image.
Press the CS button to return to normal TV picture at any time.
✐
The pictures that are saved in Auto Album will be deleted when
the power is disconnected.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Selecting of picture size
■ Zoom 16:9
4:3
14:9
16:9
Letterbox Video
■ Screen options
Today there are various transmission formats with different size
ratios, eg. 4:3 , 14:9, 16:9 and video formats such as letterbox.
■ Auto
The correct picture
width is maintained
but the top and
bottom are
Zooms in slightly
cropping the top
and bottom.
The black bars top
and bottom are
smaller and the
picture height is
compressed slightly.
Zooms in slightly
cropping the top
and bottom.
It automatically switches to the optimum screen mode according to
the WSS signal provided in the receiving signal source. If the signal
does not have it, the TV keeps current screen mode.
cropped.
✐ This setting may cause the picture to change when a different
format is received eg. when an advert is received.
✐ WSS (Wide screen signalling)
Some broadcasters transmit this signal and some VCR tapes have it
included . The signal identifies the picture format ratio (16:9, 14:9, 4:3
etc.).
■ Title In 16:9
4:3
14:9
16:9
Letterbox Video
If WSS is not being received and you are not happy with your picture
this TV provides you the option to change it with the following options.
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
Press the WIDE button repeatedly to select your desired setting.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
■ Natural
4:3
14:9
16:9
Letterbox Video
Stretches the
The height is
The picture fills the The black bars top
picture horizontally
to fill the screen.
The picture is more
stretched at the
edges.
expanded to fill the
whole screen.
screen and is
proportionally
correct.
and bottom remain
and the height is
compressed to fit
the picture area.
■ Full
4:3
14:9
16:9
Letterbox Video
■ Zoom 14:9
The whole screen
is filled stretching
the width.
The whole screen
is filled with the
corrrect picture
ratio.
The black bars top
and bottom are
present and the
height is
The whole screen
is filled stretching
the height slightly
at the edges.
4:3
14:9
16:9
Letterbox Video
compressed.
The correct picture
width is maintained
but the top and
bottom are
Zooms in slightly
cropping the top
and bottom.
The black bars top
and bottom are
smaller and the
picture height is
compressed slightly.
Zooms in slightly
cropping the top
and bottom.
cropped.
■ Normal
4:3
14:9
16:9
Letterbox Video
■ Title In 14:9
The correct ratio is
maintained with
black bars on the
left and right.
Black bars left and Black bars left,
right, picture height right, top and
Black bars left and
right, picture height
is stretched.
4:3
14:9
16:9
Letterbox Video
is stretched.
bottom.
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
As zoom (14:9), but As zoom (14:9), but As zoom (14:9), but As zoom (14:9), but
bottom is
bottom is
bottom is
bottom is
compressed even
more to allow
subtitles to be
seen.
compressed even
more to allow
subtitles to be
seen.
compressed even
more to allow
subtitles to be
seen.
compressed even
more to allow
subtitles to be
seen.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATION / HELPFUL HINTS
The following faults are not caused by the receiver:
Specification
"GHOSTS"
Common specification
Reflections of signals from mountains or high buildings will cause
multiple images, called "Ghosts". These abnormal conditions can be
reduced to minimum by repositioning aerial or by installing new one
suited for your area.
Power source
Television system
Colour system
AC 220~240V 50Hz
System I
PAL
(PAL/NTSC3.58 in AV mode)
Channel coverage
UHF: 21-69,
"INTERFERENCE"
Interference may be caused by electrical appliances, car ignition
systems, etc. This should normally be a temporary condition, but
should this interference persist, contact your dealer.
Aerial input impedance 75 ohm
AV terminal
AV1: CENELEC Standard
Input:Composite video, RGB and audio-L/R
■ Plug and Play Helpful hints.
Output:TV-output with composite video and
audio-L/R
If you do not fit an aerial into this TV set the Plug and Play feature
may start up each time you switch on your TV.
AV2: CENELEC Standard
Input: Composite video, RGB, S-VHS and
audio-L/R
To prevent this follow these instructions.
1. Switch on your TV set, the Plug and Play screen appears.
Output:Monitor-output with composite video
and audio-L/R
2. Press the MENU button on the remote control to clear the Plug and
Play screen.
AV3: CENELEC Standard
Input:Composite video, and audio-L/R
3. A second screen will appear. Press the Return key to clear from the
screen.
Side AV terminal
AV4: RCA jacks
Input:Composite video and audio-L/R
4. Press the D/A key to return to Analogue.
Headphone socket
Mini Jack
5. Press the MENU button to select the Menu screen. (as shown
below).
CE27LD4-B
CE27LD4BK-B
CE32LD4-B
CE32LD4BK-B
Timer
Sound output
(Continuous)
Setting
Sound
2 x 10W
900:1
27
2 x 10W
1000:1
32
Contrast Ratio
Screen(inches)
Preset
Auto Tuning
Auto Sort
Prog. Preset
Picture
(viewing measured diagonally)
Swap
- -
Fine Tuning
Display Resolution
Viewing angles
1280 x 720 (WXGA)
1366 x 768 (WXGA)
H:176°, V:176°
H:176°, V:176°
800 x 470 x 239
14.4
6. Select Preset Menu by pressing the 1 or 2 button.
Dimensions
(WxHxD mm)
(including stand)
7. Select Prog. Preset by pressing the 6 or 5 button and enter
Semi by pressing the 1 button.
922 x 545 x 239
17.5
8. Press the 6 button and select Memory. Press OK button to
cancel. (The OK? changes to OK).
Weight (kg)
(including stand)
Helpful hints
Semi
Channel
Position
Skip
C24
01
■ NO PICTURE, NO SOUND
● Check if TV is plugged in.
OFF / ON
OK?
● Try a different channel, if OK, probably station trouble.
Memory
■ POOR PICTURE, SOUND OK
● Adjust BRIGHTNESS control.
● Adjust FINE TUNING control.
● Check aerial connections.
9. The next time you switch on your TV set the Plug and Play screen
will not appear.
■ NO COLOUR, PICTURE OK
● Adjust COLOUR control.
● Adjust FINE TUNING control.
● Is the programme in colour ?
■ WEAK PICTURE
● Check aerial connections on back of set.
● Check aerial for broken wires.
● Re-orient aerial.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY TO CUSTOMER
SANYO Europe Ltd. (the company) warrants to the initial retail
purchaser that if this equipment is or becomes defective and that,
in the opinion of the Company, the defect is due to faulty material
or workmanship the Company will, for a period of 12 calendar
months from the date of sale to the original purchaser repair or
replace, at its sole option, free of charge, any such defective
component part of the equipment, always provided that:-
1: The equipment has at all times been used in accordance with
the operating instructions issued by the Company, and has not
been connected to an electrical mains supply for which it has
not been adjusted.
2: Accidental damage or damage caused by negligence of misuse
by the user, is specifically excluded.
3: Unauthorised repairs, or any modification to the equipment
which has not been expressly approved by the Company, shall
render this warranty null and void.
4: Failure due to fair wear and tear of any item is specifically
excluded.
This warranty is not transferable and is only applicable within the
United Kingdom (and the Republic of Ireland).
Nothing in this express warranty affects the statutory rights
available to the purchaser of this equipment.
Note: This warranty supersedes any other form of guarantee that
may inadvertently have been enclosed with or attached to the
product.
Dear Customer.
Thank you for buying SANYO. This equipment should give you
many years of pleasure and faithful service but in the event that a
fault occurs, the following notes for you guidance may be helpful:-
1: PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH WILL
BE REQUIRED FOR SERVICE DURING WARRANTY.
2: If your SANYO equipment proves faulty during the period of
guarantee, take it or send it back to the dealer who originally
supplied it together with this guarantee and the proof of
purchase. We have made arrangements with our approved
dealers under which they will carry out in guarantee service
repairs on our behalf. In this way, we hope to reduce to a
minimum the amount of time you will be without your equip-
ment.
3: If for some reason it is impossible to return the equipment to the
original supplier, please contact our Customer Relations
Department at the address below for further advice.
4: Should the equipment require servicing after the expiry of the
guarantee period, take or send it to the original supplier or any
other Sanyo dealer. He will be pleased to give you a quotation
for the repair.
Customer Relations Department,
SANYO Europe Ltd.
SANYO House,
18, COLONIAL WAY,
Watford, Hertfordshire, WD24 4PT.
Tel: 01923 246363
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Part No. 1KA6P1P0194-B
N2WK/WKA N2YK/YKA
Printed in U.K.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
|