Olympus Camera Accessories Motor Drive 2 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symbols used in this manual  
Correct  
Incorrect  
Operation  
Operation order  
Lamp on  
Two-step operation  
Automatic  
operation  
Attention  
Order  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
As the power u n it, the M. 15V Ni-Cd Control Pack 1 is illustrated.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting the Batteries  
"36" turns on.  
LR44/SR44  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Power Unit  
Attaching to the Camera  
1 . Remove the motor drive socket cap.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 . Store the removed cap.  
3 . Turn the fastening screw clockwise.  
* The cap of OM-1 or OM-2 cannot be stored.  
* If there is clearance, shake the motor drive slightly  
a n d fit it tig h tly .  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detaching the Motor Drive  
4. Set the mode selector to SINGLE or SEQUENCE.  
1 . Set the mode selector to OFF.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.  
3.  
* The motor cover should alw ays be attached if you  
are not shooting w ith the m otor drive.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the Motor Drive 2 with the OIM-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the Film  
1.  
2.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
.
Press the shutter release.  
3.  
T h e film w ill a u to m a tic a lly advance tw o fram es  
w ith o u t ta k in g pictures.  
T h e film advance release w ilt a u to m a tic a lly stop.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rewinding the Film  
T u rn th e lever u n til it stops.  
1 . Push R b u tto n .  
W hen re w in d in g is co m p le te d , th e m otor w ill a u to -  
m a tic a lly sto p .  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 . R em ove the film .  
3.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the Motor Drive 2 with the OM-20 (OM-G) or OM-30 (OM-F)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the Film  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Press the shutter release.  
3.  
The film w il I autom atically advance tw o fra m e s  
w ith o u t ta k in g p ic tu re s .  
The film advance release w ill automatically stop.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rewinding the Film  
2.  
R ew ind u n til the tension is released.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the Motor Drive 2 with the OM-2N (OM-1N)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the Film  
2.  
1.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 . Make tw o blind shots.  
3.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set the exposure counter to "36"  
Press the shutter release.  
5
.
Push th e reset b u tto n .  
T h e film advance release w ill a u to m a tica lly sto p .  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rewinding the Film  
2.  
1.  
Rewind until the tension is released.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 . Push the reset button.  
3.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to prevent automatic stop  
Using films that are not a 36-exposure roll.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching the Remote Controller  
How to illuminate the exposure counter  
M. Quartz Remote Controller 1  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching the strap  
Attaching the 250 Film Back 1  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Storage  
Questions and Answers  
Q: I have pressed the camera's shutter release.  
A: If you then press the shutter release button of  
the Motor Drive in the single mode, only the  
film advance will be activated. If you press it  
in the sequence mode, continuous shooting in-  
cluding film advance is possible.  
Q: I have operated the camera's shutter release  
and film advance lever.  
A: You can do these operations on the camera  
even when the Motor Drive is attached. The  
exposure counter will also operate normally.  
Q: There are no batteries inside the Motor Drive.  
What can I do?  
A: The Motor Drive will operate if the power unit  
is connected, but the LCD counter cannot be  
used.  
Q: I want to use the Motor Drive in low tempera-  
tures.  
A: In low temperatures, it may not operate pro-  
perly because the battery performance will be  
reduced. Try to keep its power section warm  
by using the Relay Cord, for example.  
Q: When rewinding the film, the motor does not  
stop even after a certain time.  
A: It is because the film is not engaged with the  
rewind mechanism. Turn the rewind lever of  
the Motor Drive as far as it will go. (The film  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of Controls  
1 Shutter Release Button  
2 Remote Control Jack  
10 Setting Button  
11 Reset Button  
12 Illumination Button  
3 Shutter Release Coupling Pin  
4 Film Advance Claw  
5 Rewind Claw  
6 Camera Coupling  
Terminal  
13 Rewind Lever  
14 250 Film Back  
Coupling Terminal  
7 Guide Pin  
8 Fastening Screw  
9 Rewind Coupling Claw  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15 LCD Display Window  
35  
Specifications  
Compatible cameras: OM-4, OM-2, OM-1, OM-30  
(OM-F),OM-20(OM-G).  
Film advance: 5 frames per second maximum con-  
tinuous filming without mirror lock-up as well  
as single frame advance.  
Shutter speed: All available speeds (1/2-1/1000  
sec. only in sequence mode with OM-1).  
Power supply: M.18V Control Grip 1, 2 (12 AA,  
batteries), M. 15V Ni-Cd Control Pack 1, 2  
(rechargeable), M. AC Control Box.  
Input voltage: DC 18V (AA batteries), 15V (Ni-  
Cd), 12-16V (large potentiality DC power  
supplies).  
Auto film positioning: The film automatically  
advances to the shooting position as soon as  
the camera back is closed (with OM-20, G, 30,  
F, OM-4).  
Auto rewinding: The motor automatically stops  
when rewinding is completed (with OM-4).  
Frame display: Digital LCD display subtractive  
counting; two SR44 (or LR44) batteries provide  
power for LCD display.  
Dimensions: 143 X 77 X 93mm (5.6" X 3.0" X  
3.7").  
Weight: 360 g. (12.7 oz.).  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
O LYM PUS O PTIC AL CO .,LTD.  
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan Tel 03-340-2211  
O LYM PUS C O R PO R ATIO N  
Crossways Park, Woodbury, New York 11797, U.S.A. Tel. 516-364-3000  
O LYM PUS O PTIC ALC O .(EU R O PA)G M BH  
Postfach 104908, Wendenstrasse 14-16, 2 Hamburg 1. West Germany Tel: 040-23773-0  
O LYM PUS O PTIC ALC O .(U .K.) LTD.  
2-8 Honduras Street, London EC1Y OTX, England Tel 01-253-2772  
I4EMMS2-0184-5MS  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Oven H 4681 User Manual
NCR Home Theater Screen NCR 5972 User Manual
NETGEAR Network Card WPNT511 User Manual
Netopia Network Router PN Series User Manual
Newcon Optik Binoculars NVS 7 User Manual
NordicTrack Treadmill NTL14941 User Manual
NordicTrack Treadmill NTL190070 User Manual
Oreck Noise Reduction Machine SML200 User Manual
Palm Cell Phone m500 Series User Manual
Panasonic Ventilation Hood FV 08VQCL6 User Manual