9. ACCEPTANCE CERTIFICATE
Image Intensifier Tube
Minimum
30
Measured
Operation Manual
Resolution, lines/mm
Photocathode sensitivity,
integral, µA/ lm
400
Light amplification
20,000
Image Intensifier Tube Serial Number: _____________
Date of production: __________
Quality Inspector Signature: ____________
NIGHT VISION DEVICE
__NVS 7-2 __NVS 7-2SD __NVS 7-2HD __NVS 7-2WA
__NVS 7-2XT __NVS 7-3HD ___NVS 7-3XT
The device with serial number _______________ corresponds to all
technical specifications and is admitted for usage.
Date of production: _____________
Quality Inspector signature: _____________
Quality assurance seal
NIGHT VISION BINOCULARS/GOGGLES
NVS 7
NSN: 5855-20-000-8284
NEWCON OPTIK ™ 2006
Printed in Canada
Download from Www.Somanuals.com. All Manuals Search And Download.
7. WARRANTY:
CONTENTS
NEWCON OPTIK warrants this product against defects in
material and workmanship for one year from the date of the
original date of consumer's purchase, but no more than 18
months from the date of manufacturing. Longer warranty periods
are available, subject to the terms of specific sales contract.
Should your Newcon product prove defective during this period,
please bring the product securely packaged in its original
container or an equivalent, along with proof of the date of
original purchase, to your Newcon dealer. Newcon will repair
(or at its option replace), the product or part thereof, which, on
inspection by Newcon, is found to be defective in materials or
workmanship.
1 Overview
5.1 Pre-starting procedures
5.2 Testing of operation
5.3 Operation at night
5.4 Optional lenses
5.5 Using the helmet mount
(optional)
6 Troubleshooting
7 Warranty
8 Customer support
9 Acceptance certificate
I) Application and
advantages of NVS 7
II) Warning
III) Precautions
2 Components
3 Specifications
4 Construction
5 Operating Instructions
What This Warranty Does Not Cover:
THANK YOU FOR PURCHASING THE NVS 7
TYPE NIGHT VISION
BINOCULARS/GOGGLES. PLEASE DEMAND
TO CHECK THE DEVICE FOR PROPER
OPERATION WHEN BUYING IT. PLEASE
READ ALL THE INSTRUCTIONS
NEWCON OPTIK is not responsible for warranty service
should the product fail to be properly maintained or fail to
function properly as a result of misuse, abuse, improper
installation, neglect, damage caused by disasters such as fire,
flood, lightning, improper electrical current, or service other than
by a NEWCON Authorized Service. Postage, insurance, or
shipping costs incurred in presenting your NEWCON product
for warranty service are your responsibility. Please include a
cheque or money order made out to NEWCON OPTIK for the
amount of $15.00 to cover shipping and handling within North
America.
CAREFULLY BEFORE USE.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
6. TROUBLESHOOTING
The device does not work.
Check that the battery is installed properly.
Check the charge of the batteries. Replace them if they are weak.
NVS 7 is a sophisticated precise optical instrument equipped
with electronics.
Therefore, it should be handled with due care.
•
Try to avoid strong heat, direct sunlight, impacts, dust, moisture
and sudden changes of temperatures. Keep in mind that, although
being very durable, NVS7 contains fragile components.
Do not touch the optical surfaces with fingers. Doing so
may damage the anti-reflection coating.
Cleaning of optical surfaces is allowed only with
professional camera lens cleaning supplies.
To clean the exterior of the device, use only a soft clean
cloth.
Do not take the cover off the lens if not necessary.
Keep away from heating appliances and central heating.
Make sure to switch off the unit and remove the batteries
during periods of non-operation and when storing the device
for long period of time.
Do not apply superfluous efforts at work with lens
assembly, agile elements and thread connections.
Due to considerable optical magnification of the eye-piece
some small structures inside the Image Intensifier Tube
coating in the form of dark and/or white points may be seen
in the field of view. This does not affect the serviceability of
the device.
The image does not appear in focus.
Bring the inspected object to the center of the image. Rotate the
eyepieces (6) to achieve the clearest image on the screen. Then
obtain the most clear-cut image of the object focusing the lens
(2). Repeat the steps of focusing if necessary
•
•
•
If the view still does not seem in focus, clean the lenses - they
could be foggy or dusty.
Unit flashes
It is normal for the unit to flash within the first 2 minutes of
activation. If the flashing continues afterwards the following is a
possible cause: bright environment (even with the caps closed!)
Condensation accumulates on the parts.
It is O.K. to use the unit in cold. However, when the unit is
brought from the cold into a warm environment, it has to warm
up for up to 2 hours (not minutes!).
Only then it is allowed to turn it ON again.
Visibility decreases and / or disappears.
Bright light sources (moon, projectors or headlights) may cause
visibility to degrade or even completely disappear. Move the
device away from the light source immediately.
•
•
•
•
•
The image should be restored in within 2 minutes. Poor
atmospheric conditions such as fog, haze or extremely dark
environments will decrease the visibility distance of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the button (2) to change the fixating point of the goggles
during operation. Rotate the goggles with depressed button (2)
until you hear the click. You can raise the unit up vertically for
unobstructed vision without taking the helmet off. The unit will
automatically shut off in this position. (Note: this is an optional
feature). Reverse the operation to turn it on.
1. OVERVIEW
The NVS 7 type night vision is observational optico-electronic
binoculars/goggles, intended for examining objects and orientation at
nighttime or dark conditions. The unit utilizes a generation 2+ or 3
image intensifier tube, which amplifies available moonlight, starlight or
man-made light. The device was designed to be easy to use, and
provide many years of operation.
All other operations with goggles mounted on a helmet are identical
to those with the head gear.
Some of the typical activities where NVS 7 will be useful:
•
•
•
•
•
•
Law enforcement
Wildlife observation
Security
Search and rescue
Hunting
Photography (Dark room operation)
Features
•
•
Waterproof construction
Built-in infrared illuminator allows observations in total
darkness (i.e. basement, cave or dark room);
Flip/flop mechanism allows easy unobstructed vision;
Independently adjustable eyepieces;
Ideal in situations requiring hands-free operation;
Lightweight and comfortable;
•
•
•
•
•
A soft rubberized eyepiece makes the viewing more
comfortable.
WARNING! NEVER OPERATE YOUR NIGHT VISION
DEVICE IN DAYLIGHT WITHOUT THE LENS COVER ON!
NEVER DIRECT THE LENS IN THE DIRECTION OF
BRIGHT LIGHT!
Download from Www.Somanuals.com. All Manuals Search And Download.
2. COMPONENTS
NVS 7 is supplied with the following components:
5.5 Using the helmet mount (optional)
NVS 7 can be equipped with an optional helmet mount. This
mount is customized for a particular type within the wide variety
of existing helmet models. The mount is attached to a helmet
with stripes. The goggles are fixed to the mount by a locking
screw (1). Adjust the goggles position on your eye level with the
screw (4).Then adjust the
eye-relief (the distance
between your eyes and the
eyepieces), which should be
PART
NVS 7 unit with 1x lens *
Head gear*
Lens caps
Manual
QUANTITY
1
1
1
1
1
Warranty registration card
about 25 mm. In order to
achieve this, loosen locking
screw (1) and set a
comfortable distance
between the eyes and the
eyepieces; then tighten the
locking screw back.
You can fixate the unit in
three predetermined
Optional parts **
PART
3x add-on lens
4× lens
8x lens
Sacrificial lens
Demist shields
Soft case
QUANTITY
1
1
1
1
2
1
1
1
1
1
2
4
3
1
2
Figure 7
1 – locking screw; 2 – flip/flop
button; 3 – flip-flop adjusting
Hard case
positions: vertical,
Neck strap
Lens brush
Lens cloth
AA batteries
horizontal, and 15-20
degrees above horizontal.
The angles between these
positions cannot be changed,
screws; 4 – mount binding screw
but the starting point is adjusted by screws (3). If you loosen
them, you can rotate the flip-flop mechanism to find the most
suitable starting fixating point. Don’t forget to tighten the screws
(3) after adjustment.
* In a binocular configuration the unit is supplied with 4x or 8x lens
without head gear, and without 1x lens
** Exact delivery set and accessories included are
subject to the terms of specific sales contract.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION:
3. SPECIFICATIONS OF NVS 7
Model
NVS
7-2
7-2SD 7-2HD 7-2XT 7-2WA
7-3HD
During daytime: It is allowed to turn on the goggles at daytime for a
short period of time, for testing purposes only. Lens cap must be
installed during this operation. The image will be fuzzy, and/or you will
see 3 images. This is normal because of the catadioptric construction of
the lens.
18 mm Gen. 2+
25 mm
Gen. 2+
18 mm
Gen. 3
N3064322
Image Intensifier Tube
(IIT)
NC104322 NC064322 NC064322 NCXT4322 NC064331_25
IIT model
30-36 40-45 45-57 57-72
45-64
60
15
45-72
40
25
IIT resolution, lp/mm
Field of view, º
Eye relief, mm
Objective focal length,
mm
40
25
27.5
Warning. Never turn on the goggles with either 1x or 4x lens
during daytime, without the lens caps. Doing so will result in
damaged power supply and/or tube and costly repairs not
covered by the warranty.
24.76
27.5
F1.2 / T1.25
F1.35 /
T1.4
F1.2 /
T1.25
Objective F / T
numbers
During night time: Remove the lens cap by unscrewing it counter
clockwise. Keep the lens cap in a safe place, so it won't get lost. Use
the focusing ring at the base of the lens in order to adjust the image.
You will need to readjust the image for different objects at different
distances.. You should expect to have a sharp image for distances as
close as 10-20m through infinity.
1
Magnification, x
Interpipillary distance,
mm
Focus range, m
Dioptric correction
Battery type
Battery life, hours
Low battery indicator
I/R ON indicator
Momentary I/R button
Automatic shut-off in
the up-rise position
(optional)
58-72
0.25-∞
±5
2 standard AA batteries
Over 80 hours without I/R; over 30 hours with I/R
-
-
-
-
√
√
-
√
√
√
√
√
√
-
√
√
-
√
√
√
Waterproof 2 m, 2
hours
150x120x55
0.480
Dimensions, mm
Weight, kg
Figure 5
NVS 7 with 4x lens
Figure 6
NVS 7 with 8x lens
NOTE: As the design is being continuously improved some
descriptions may differ from those given above.
Download from Www.Somanuals.com. All Manuals Search And Download.
Main tube parameters
Image Intensifier Type
(Generation/Grade)
Photocathode operating diameter, mm
Photocathode type
Photocathode sensitivity, min:
Integral, µA/ lm
5.4 Installation and operation of optional lenses
INSTALLATION:
2+ / SD,
HD, XT
3 / HD
GaAs
Note: The following procedure is identical for 4x or 8x lenses . Unpack
the 4x lens from the box. Turn off the NVS 7 goggles. Remove the
rubber lens cap (6). Remove (unscrew) the original 1x lens, which is
included with the NVS 7 goggles. To do that, hold the lens at its base
(1) and unscrew it counters clock wise. Once the original 1x lens has
been removed, store it in a safe, clean space (you can use the 4x lens
packaging for that). The
18
S-25
500-750
35
1200-2100
45
Spectral at λ = 850 nm, mA/W
Light amplification
25,000
1
1⋅10 −3
Image magnification
Max dark background brightness, cd/m2
NVS 7 4x lens should be
screwed, clock wise,
instead of the 1x original
lens. Please exercise
extreme caution at the
initial stage.
Signal-to-noise ratio, min
Current consumption, max, mA
Voltage, V
Tube life until reduced parameters, hrs
Keep time, years
18-25
20
18-24
25
2.8±0.8
10,000
15
The threads are very fine
Ambient temperature range, °C
-50 … +55
(to prevent humidity
Spatial frequency-contrast characteristic
1. Lens base
penetration) and can be
damaged easily. Do not
force the lens rotation. If it
does not screw in
Frequency,
lines/mm
2.5
Contrast transfer
Coefficient (HD)
Contrast transfer
Coefficient (XT)
Figure 4
0.89
0.68
0.40
0.92
0.80
0.58
7.5
15.0
smoothly, remove it and
Field of view cleanness
make sure that the threads are matching correctly. Now it is ready for
operation. Removal of the lens is done in reverse order.
Warning: The lens should screw in smoothly. If not, remove it and
make sure that the threads are matching correctly.
Failing to do so and forcing the installation of the lens will
result in broken threads and costly repairs to both the
goggles and the 4x lens.
Zone
Zone
Maximum diameter of defects
Admitted
area of defects,
total, mm2
#
Diameter,
Neglected
Admitted
Mm
Qty
∅, mm
0.15
1
2
3
0 – 9.0
9.0 - 14.4
14.4 -18.0
0.10
0.12
0.15
2
3
3
0.15
0.30
0.50
0.25
0.35
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 Operation at night
4. CONSTRUCTION
You can use the device with the head gear or without it.
When used with the head gear, first adjust all the straps for
individual head size. Take off the lens covers (6) from the lens
(7). Turn on the device-using switch (1). In case of insufficient
lighting when observing an object, which is situated not far from
the viewer, turn on the I/R illuminator by turning the I/R switch
(1). The red indicator (Fig. 3) will be on.
Note: The I/R illuminator is visible to anybody with a night
vision device and will disclose the user’s presence.
You can raise the unit up for unobstructed vision without taking
the head gear off by using the “flip/flop” feature (Fig. 2). To
switch the unit into off-working position: press the lever (9)
down and raise the device into vertical position, until you hear a
click. The unit automatically shuts off in the upright position
(Note: this is an optional feature).
3
2
1
1. On-Off, I/R Switch
2. Mounting socket
3. Eyepiece adjustments
4. Eyepieces
5. Battery house cover
6. Objective lens cover
7. Objective lens focus
8. Tightening screw
9. Lever
4
7
9
5
6
Figure 1
Reverse the operation for a working position.
After operation the user should turn off the unit by rotating switch (1)
to the OFF position. Put protective lens caps (6) on the lens (7). After
operation remove the batteries from the battery compartment to avoid
any damage of the device in case of occasional leakage of electrolyte
from the batteries.
Figure 2
Download from Www.Somanuals.com. All Manuals Search And Download.
5. OPERATION INSTRUCTIONS
5.1 Pre-starting procedures:
5.2 Testing of operation:
When wearing the unit the eye-relief (the distance between your
eyes and the eyepieces) should be 15-22 mm. In order to achieve
this, loosen locking screw (8) and set a comfortable distance
between the eyes and the eyepieces; then rotate the locking
screw (8) back. Turn on the device by rotating the switch (1) to
the ON position. The green screens of the scopes must be lit.
Direct the device on an object placed within 8-15m from the
viewer. Rotate the eyepieces (4) and the lens (7) in order to
achieve the sharpest image on the screen of the image tube.
The eyepieces (4) are set for a person individual eye sight, and
do not need to be changed if the same person is using the
apparatus. The lens (7) focus needs to be adjusted according to a
different distance of observed scenery.
Unpack the device. In order to install the battery, first make sure
the switch (1) is in the OFF position. Unscrew the battery house
cover (5), and install 2 fresh AA batteries. Observe the correct
polarity indicated on the housing. Screw the battery house cover
back on. Check the functioning of the device by switching it on
(rotate switch (1) and looking through eyepieces (4). Make sure
the lens cap (6) is on while operating during the daytime. If
power supply and the batteries are O.K., you will see greenish-lit
screen. If the screen is not lit, check the batteries. Replace the
batteries if necessary.
There are one or two indicators
in the visible zone (see Fig. 3).
When they are off the user can
hardly notice them. Bright
The distance between the eyes should be automatically
applicable for people with 58-72 mm interpupilary distance,
which covers over 99% of the adult population.
yellow and/or flashing red
indicates that battery voltage
goes low. You should have the
fresh batteries ready and
replace them in time. Bright
red reminds / warns the user
Figure 3
I/R illuminator and low battery
that the I/R illuminator is on
indicator (red)
(see below).
Optional separate low battery
indicator (yellow)
If everything works, now is a
great time to fill the warranty
card.
Download from Www.Somanuals.com. All Manuals Search And Download.
|