F30/F35
Remote Vehicle Control System
Owner's Manual
OEM Keyless Entry
Upgrade Security System
IMPORTANT NOTE: The operation of the F30/F35 as described in this
manual is applicable to most vehicles. However, due to the engine type
and configuration of some vehicles (i.e. diesel engines), some functions
AND/OR SAFETY PRECAUTIONS may not apply. Please see your
installing dealer for more information.
101102-3
9/01
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Features and Benefits of the F30/F35
OEM Keyless Integration
The F30/F35 utilizes your factory keyless entry remote controls and
adds a complete vehicle security system while retaining factory
functions.
All Entrances Protected
Opening any door or entrance protected by the security system
triggers the vehicle’s horn and flashes the vehicle parking lights.
Starter Disable
The F30/F35 protects your vehicle from theft by disabling the starter
when the system is armed.
IT-sTM InteriorTheft Sensor
This patented sensor uses infra-red technology to reliably detect
vehicle impact associated with attempted intrusion. The IT-sTM
sensor guards against vehicle body damage, and theft car
equipment (such as airbags) and personal belongings.
Interior Status Indicator
The bright-red warning light is an effective visual deterrent to a
would-be thief.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Using Your Existing Remote Transmitter
CODE-ALARM, INC. Theft Protection Plan
The Theft Protection Program is designed to provide the retail pur-
chaser of a security system provided by CODE-ALARM, INC. (“CODE”)
an additional benefit, at no additional cost to the purchaser, should
their vehicle be stolen while protected by a CODE-ALARM security
system. While CODE has created this program as a way of showing
appreciation to its customers, CODE RESERVES THE RIGHT TO
UNILATERALLY CHANGE, ALTER, MODIFY, OR DISCONTINUE ALL
OR PART OF THIS THEFT PROTECTION PROGRAM WITHOUT
PRIOR NOTICE.THIS THEFT PROTECTION PROGRAM IS NOT AN
INSURANCE POLICY AND SHOULD NOT REPLACE AN AUTOMO-
BILE OR HOMEOWNERS INSURANCE POLICY.THIS THEFT PRO-
TECTION PROGRAM DOES NOT COVER LOSSES ARISING FROM
THE THEFT OF ITEMS WITHIN THE AUTOMOBILE OR ANY DAM-
AGES ARISING FROM, RELEATED TO, AND/OR INCIDENTAL OR A
CONSEQUENCE OF A VEHICLE THEFT EXCEPT AS SPECIFICALLY
DELINEATED BELOW.
Existing Keyless Entry or Security Remote
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press* the
LOCK button on your OEM Keyless Entry Remote Control. The horn
will “chirp” twice† and the parking lights will flash twice, indicating the
system is armed. The status indicator (red warning light on the dash)
will blink steadily, once per second.
Pre-arm Mode
If the horn chirps and the parking lights flash only once, this indicates
that the vehicle courtesy light is on, or that an entrance is not closed
securely. Check to see that doors, hood, and trunk are properly
closed. Once all entrances are secured (and the courtesy light is off),
the system will chirp / flash again. The system is now fully armed. (If
the entrance is not secured within 4 minutes, the system will arm and
ignore the unsecured entrance until it is closed.)
Plan duration: 1Year from the date of installation.
Plan amount: F30/F35 ....................Maximum allowable value equal to
insurance deductible or up to $2,500 whichever is less
Disarming the Security System
Conditions of the Theft Protection Program:
1. The Theft Protection Program is non-transferable and non-assignable.
2. The system must be installed by an authorized CODE dealer.
3. Vehicle must be less than three (3) model years old at the time of
installation.
To disarm the system, press the UNLOCK button on your OEM
Keyless Entry Remote Control. The siren will chirp and the parking
lights will flash once.
Attempted Intrusion Identification
4. The security system must have been fully armed at the time of the vehicle
theft.
5. The vehicle in which the system is installed must be insured for theft by a
licensed insurance underwriter in the state in which the vehicle is
registered.
If the horn chirps four times when disarming, this indicates that the
system was triggered in your absence. The status indicator will also
flash rapidly. Perform the following operation to determine the protected
zone that triggered the system:
After disarming, press the emergency override button.
The siren will chirp to indicate
the cause of the alarm trigger:
Terms of payment:
1. The vehicle must first be considered a total loss due to theft by your
insurance company.
2. Your insurance company has settled all claims arising from this theft and
there are no other pending legal actions as a result of this theft.
1 chirp IT-s Interior Theft Sensor
2 chirps Door
How to file a request for payment:
If the above conditions are met, make your request for payment by submitting
the following to CODE. The request for payment must be received by CODE no
later than sixty (60) days after the vehicle is reported stolen.
1. Copy of the retail sales receipt for the purchase of the security system,
clearing showing the model of system purchased and the year, make and
model of the vehicle in which the system was installed.
3 chirps Hood
4 chirps Trunk/Optional Sensors
5 chirps Ignition was turned on
2. A copy of the police report for the stolen vehicle.
3. A copy of the paid insurance claim and reimbursement check from the
insurance company.
Send the above items to CODE by certified mail at the following address:
CODE-ALARM, INC.
Consumer Affairs Department
950 E. Whitcomb
Madison Heights, MI. 48071
1-800-421-3209
Download from Www.Somanuals.com. All Manuals Search And Download.
CODE-ALARM, INC. 3-YEARWARRANTY
5
12
Using Your Remote Transmitter (cont.)
A CODE-ALARM, INC. (“CODE”) vehicle system sold to a retail consumer purchaser by an
authorized dealer of CODE and installed by an authorized dealer of CODE is warranted by
CODE to the original retail consumer purchaser to be free from defects in workmanship
and materials for three (3) years from when the system was originally installed.
To enter valet mode:
With the key, turn the ignition on, then turn off 3 times within 5 seconds.
A CODE vehicle system sold to a retail consumer purchaser by an authorized dealer of
CODE and installed by a party other than an authorized dealer of CODE is warranted by
CODE to the original retail consumer purchaser to be free from defects in workmanship
and materials for a period of ninety (90) days. Defects caused by or related to the
improper installation of the system are not covered by this or any other warranty.
To exit Valet mode:
With the key, turn the ignition on, then turn off 3 times within 5 seconds.
The duration of this warranty described above applies to all components of the system except for:
switches, indicator lights, transmitter(s) and accessories purchased separately.
When Your Security System is Triggered
Transmitters, exclusive of the transmitter case, are warranted by CODE to the original
retail consumer purchaser to be free from defects in workmanship and materials for three
(3) years from when the system was originally installed.
The F30/F35 will trigger if one of the following events occurs while the
system is armed:
Switches, indicator lights, and transmitter cases are warranted to the original consumer
purchaser for a period of one (1) year from the date of purchase when the system is
installed by an authorized CODE dealer.
• Any protected entrance is opened
• The vehicle ignition is turned on
• The vehicle is jolted hard enough to signal the impact detector
Switches, indicator lights, and transmitter cases are warranted to the original consumer
purchaser for a period of ninety (90) days from the date of purchase when the system is
installed by a party other than an authorized CODE dealer.
Once the alarm is triggered, the siren (or horn) sounds and the
vehicle parking lights flash for 30 seconds. The system will then re-
arm, awaiting the next intrusion attempt. To stop the siren while
keeping the alarm armed and doors locked: press the LOCK button
(on the OEM Keyless Entry Remote) while the system is triggered.
System accessories are covered by the warranty supplied with the accessory. Wiring
harnesses altered by installation and transmitter batteries are not covered by this or any
other warranty.
This warranty is non-transferable, non-assignable and is completely voided when the
system is removed from the car in which it was originally installed. If the vehicle in which
the system was originally installed is transferred to another party, this warranty no longer
applies.
The Interior Status Indicator
This warranty does not apply to any product damaged by accident, physical or electrical
abuse, improper installation, alteration, any use contrary to its intended function,
unauthorized service (i.e. service by anyone other than CODE or its authorized service
personnel), fire, flood, lightning or other acts of God.
The Status Indicator is a high-intensity red light mounted in a visible
location on the vehicle dashboard. This red light gives a visual
indication of the alarm system’s state of operation. Note the chart below:
Should a product be found to be defective during the warranty duration, CODE will repair
or replace the product or any part of the product that CODE agrees is defective without
charge to the retail consumer purchaser of the product during the first year of the
warranty period. After the first year of the warranty period has expired CODE will repair or
replace the product or any part of the product that CODE agrees is defective for a fee of
$10.00 to cover shipping and handling charges.
If the Status Indicator is...
Off
....then the Security System
is disarmed
Flashing Slowly
Flashing Very Quickly
is armed
In order for a product to be repaired or replaced under the terms of this warranty, the
defective product must be returned to an authorized CODE dealer and accompanied by a
copy of the original retail sales receipt. The date of purchase and year, make and model
of the vehicle in which the system was originally installed must be clearly indicated on the
sales receipt.
was triggered in your absence
(see Attempted Intrusion ID - page 4)
Flashing Intermittently
(2 flashes, off, 2 flashes)
is in Valet mode
CODE shall not be held responsible for any removal and/or reinstallation charges of a
defective product, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure of the product to function properly. Under no
circumstances should this warranty, or product covered by it, be construed as an insurance
policy against loss. CODE neither assumes nor authorizes any person or organization to make
ANY WARRANTIES or assume any liability in connection with the sale, installation, or use of
this product. This is the complete CODE warranty and no other warranty exists.
On (not flashing)
is in Pre-arm mode
The warranty identified in this form is exclusive and CODE makes no other warranties
expressed or implied for any goods or services provided by CODE. CODE specifically and
expressly excludes any other warranties including the fitness for a particular purpose and
all warranties of merchantability. The customer’s sole and exclusive remedy for any and all
claims against CODE arising out of the customers use of any CODE vehicle system or
component shall be as delineated in the warranty set forth above. CODE shall not be liable
to any customer or any other person or entity for any direct or indirect, consequential,
special or exemplary damages arising out of or in connection with the customers use of,
or inability to use, or misuse of any CODE provided product.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
6
Basic Troubleshooting
Programming Selectable Options, cont’d
This section outlines some of the basic issues you may experience
while becoming used to the F30/F35. If you have a problem that is not
covered by this section, please consult your installer.
Default settings in BOLD
OPTION
DESCRIPTION
Option Bank 0 - 3 Chirps (Learn Transmitters)
Option Bank One - 4 Chirps (Keyless Options)
STATUS INDICATOR
Symptom
Problem
Solution
1.Lock with Ignition
Doors lock when all doors are closed and
ignition is turned on
ON
OFF
2.Delayed Door Lock
3.Extended Locks
4.Unlock with Ignition
5.Double Unlock Pulse
6.Silent Choice
3 sec. delay locking for theater dimming
Lock duration is (1) 5 sec. or (2) 0.6 sec.
Doors unlock when ignition is turned off
Unit provides two pulses on each unlock
ON
OFF
Remote control does
not work
Weak or dead battery Change battery
ON(1) OFF(2)
ON
ON
OFF
OFF
(1) By pressing LOCK or UNLOCK twice (manual) ON(1) OFF(2)
Door or other
Close entrance
entrance is open
7.60 Second Pre-Arm
ON
OFF
System will not arm
Courtesy light is on
Turn courtesy light off
Option Bank Two - 5 Chirps (Keyless & Alarm Options)
1.Passive Starter Kill
2.Passive Arming
Engages starter kill after one minute
Alarm automatically arms 60 sec.
after ignition is turned off
ON
ON
OFF
OFF
System is in Valet
mode
Turn off Valet mode
(page 5)
3.Passive Door Locks
4.Noise Control
Doors lock automatically when alarm
passively arms
Alarm will (1) sound for five 30-sec. cycles,
then ignore trigger or (2) Sound continuously
when triggered if an entrance is left open
(1)Real Panic (2)Steady Pulsed
ON
OFF
ON(1) OFF(2)
(1)ON (2)OFF
5.Real Panic Sound
OPTION
DESCRIPTION
Option Bank Three - 6 Chirps (Installer Options)
STATUS INDICATOR
1.Door Trigger Polarity
2.Keyless Mode
3.Horn?siren
(1) Positive (2) Negative
ON(1) OFF(2)
ON (1) OFF(2)
ON (1) OFF(2)
(1) Horn (2) Siren
4. Unused
5.UnlockSensePolarity
6. LightTouchadj
Do Not Change
(1)Positive(2)Negatiive
ARMraisessensitivity;DISARMlowerssensitivity
ON(1)OFF(2)
ON
OFF
7. FullShockadj ARM raisessensitivity;DISARMlowerssensitivity
ON
OFF
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including any interference that
may cause undesired operation.
Warning!
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Programming Selectable Options, cont’d
Emergency Disarm Procedure
7
Note:The following section describes programming options
without using a remote transmitter.This programming method
can be used for all options programming with the exception of
IT-sTM sensor sensitivity adjustments.When adjusting the IT-sTM
sensor a programmed remote must be used.
If your remote control is lost or fails to function, use this procedure to
disarm the F30/F35 and start your vehicle.
1. Use the keys to enter the vehicle.
The alarm will sound once the door is opened.
2. Insert the key into the ignition and turn to the ON position.
Alternative Method for Programming Selectable Option’s
1. Open the driver’s door.
3. Locate and press the emergency override button.
The alarm will turn off and then you will be able to
start your vehicle.
2. Turn vehicle ignition on.
3. Press and hold emergency override button. After 15 seconds,
the horn will chirp three (3) times. This indicates that the unit has
entered the transmitter programming mode.
Your Emergency Disarm Button is located:
4. Release, then press and release the button, again. The horn will
chirp (4) times indicating the the unit has entered the programming
options mode.
5. Press vehicle’s lock switch to advance to the next feature. The
siren or horn will sound a number of times to indicate the number
of the option.
6. Press vehicle’s unlock switch to turn the option on or off. The
vehicle. The vehicle status indicator on the dashboard indicates
whether an option is on or off.
Installer Programmed Options
• If the selected option is ON, the indicator will light.
• If the selected option is OFF, the indicator will turn off.
•The status indicator will turn on or off when an option is changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
8
System Layout
Programming Selectable Options
Programming Selectable Options using a generic Code Alarm
remote.
Programming the Remote Transmitter
1. Open the driver’s door.
2. Turn vehicle ignition on.
3. Press and hold emergency override button. After 15 seconds,
the siren or horn will sound three (3) times. This indicates that the
unit has entered the transmitter programming mode.
4. Release the button.
5. Press the Arm button on the remote transmitter to be programmed.
The siren or horn will sound once, indicating that the system has
“learned” that remote transmitter.
A
Programming Options
1. Repeat steps 1-4 of Programming the RemoteTransmitter
1. Press and release the emergency override button.
The horn or siren will sound four (4) times. This indicates that the
unit has entered the Keyless Options Programming mode.
IMPOR
beprogrammedeforeitwilloperate.
2. Press the FIND/PANIC button to advance to the next feature.
The siren or horn will sound a number of times to indicate the
number of the option.
3. Press the ARM button to turn the option on or off. The vehicle
status indicator on the dashboard indicates whether an option
is on or off.
Refrtotheporagmimnginstrucionsongpaes-911.
Basic Harness
T
• If the selected option is ON, the indicator will light.
• If the selected option is OFF, the indicator will turn off.
•The status indicator will turn on or off when an option is changed.
1
2
3
4
5
6
7
8
9
10 11 12
Not Used.
Not Used.
13 14 15 16 17 18
19 20 21 22 23 24
View from wire end
5. When changes are complete, press and release the emergency
override button to continue to the next option bank. (Siren or horn
will sound five (5) times.)
6. To reset all options back to factory defaults, press the
DISARM button.
Note: Option Bank Installer options will never reset.
7. Turn ignition off to exit programming.
See Programmable Options Chart on Page 11.
Download from Www.Somanuals.com. All Manuals Search And Download.
|