IBM Computer Monitor C190 User Manual

Color Monitor  
C190  
User’s Guide  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety: Read first  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important: Before connecting the monitor, turn off the computer and attached devices. Also  
ensure the power at the electrical outlet matches the power requirements of the monitor.  
Refer to the Specifications section on page 18 for more details.  
Attaching the stand  
1. Place the monitor face down on a soft surface to prevent the screen being scratched.  
2. Insert the hook (1) into the matching slots on the underside of the monitor (2).  
3. Slide the base towards the front of the monitor until the latch (3) clicks into the locked  
position.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting your monitor  
1. Connect the signal cable to the video port on the back of your computer (figure A).  
Your computer may have a video adapter card installed. In this case, attach the  
signal cable to the connector on the video adapter card (figure B)  
2. Connect the power cord to the monitor first, and then firmly insert the plug into a  
properly grounded electrical outlet.  
3. Turn on the monitor, and then the computer.  
If your monitor does not seem to be working correctly, refer to the Troubleshooting section for  
help.  
Workplace preparation  
Positioning the monitor  
Choose a suitable place to position the monitor where it is not near fluorescent desk lighting  
or any equipment that produces magnetic fields that could cause interference. Ensure that the  
furniture or equipment can support the weight of the monitor. Allow at least 2 inches (50mm)  
ventilation space around the monitor.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Height  
Position the monitor so that the top of the screen is slightly below your eye level when you sit  
at your workstation.  
Orientation  
Choose a position that gives the least reflection form lights and windows, usually at a right  
angle to any windows. Position the monitor directly in front of you so that you do not have to  
twist your body. Tilt the monitor to a comfortable viewing angle.  
Working Practices  
Rest  
Take regular breaks. Vary your posture, and stand up and stretch occasionally, as prolonged  
use of computer workstations can be tiring.  
Back  
Sit back in the chair and use the backrest.  
Hands  
Use a light touches on the keyboard, keeping your hands and fingers relaxed. Allow a space  
in front of the keyboard to rest your wrists when not typing. Consider using a wrist pad.  
Eyesight  
Working with monitors, in common with any prolonged close work, can be visually demanding.  
Look away from the screen, periodically and have your eyesight checked regularly.  
Screen settings  
Set the screen brightness and contrast to a comfortable level. You may have to adjust this as  
the lighting changes during the day. Many application programs let you select color  
combinations, which can help you to view in comfort.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Device Driver  
Installing the Device Driver for Windows 95 or Windows 98  
To install the device driver in Microsoft® Windows®95 or Windows98, do the following:  
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in  
Windows 95 or Windows 98.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow your computer to start the  
Windows 95 or Windows 98 operating system.  
Your computer’s Plug and Play code might warn you that your system  
hardware has changed. This means that it has detected your new  
monitor for the first time.  
4. Open the Display Properties window by clicking Start, Settings,  
Control Panel and then double clicking on the Display icon.  
5. Click the Settings tab.  
If you are using Windows 95:  
6. 1. Click the Change Display Type button.  
2. Click the Change Monitor Type button.  
• If you are using Windows 98:  
6. 1. Click the Advanced button.  
2. Click the Monitor tab.  
3. Open the Upgrade Device Wizard window by clicking  
on Change button and then select the Next button.  
4. Click “Display a list of the known drivers for this device so that  
I can choose a specific driver” and then select the Next button.  
7. Insert the IBM Monitor CD into the CD drive and click the Have Disk button.  
8. Click OK.  
9. Ensure that the CD drive letter is selected, and then select “DRIVERS” folder.  
10. Select IBM C190 CRT monitor and click OK. The files will be copied from  
the CD to your hard disk drive.  
11. Close all open windows and remove the CD.  
12. Restart the computer.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Device Driver for Windows 2000 or Windows Me  
To install the device driver in Microsoft® Windows®2000 Professional or Microsoft Windows  
Millennium Edition (Me), do the following:  
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in  
Windows 2000 or Windows Me.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows  
2000 or Windows Me operating system.  
4. Open the Display Properties window by clicking Start, Settings,  
Control Panel and then double-clicking the Display icon.  
5. Click the Settings tab.  
6. Click the Advanced button.  
7. Click the Monitor tab.  
8. Click the Properties button.  
9. Click the Driver tab.  
10. Open the Upgrade Device Driver Wizard window by clicking on  
Update Driver and then click the Next button.  
11. Select “Display a list of the known drivers for this device so that I can  
choose a specific driver” and then click the Next button.  
12. Insert the IBM Monitor CD into the CD drive and click the Have Disk button.  
13. Click OK.  
14. Ensure that the CD drive letter is selected, and then select the “DRIVERS”  
folder.  
15. Select IBM C190 CRT monitor and click OK. The files will be copied from  
the CD to your hard disk drive.  
16. Close all open windows and remove the CD.  
17. Restart the computer.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the device driver in Windows XP  
To install the device driver in Microsoft® Windows XP, do the following:  
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in  
XP.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows  
XP operating system.  
4. Open the Display Properties window by clicking Start, Settings,  
Control Panel and then double-clicking the Display icon.  
5. Click the Settings tab.  
6. Click the Advanced button.  
7. Click the Monitor tab.  
8. Click the Properties button.  
9. Click the Driver tab.  
10. Open the Hardware Update Wizard window by clicking on Update Driver and then click  
the Next button.  
11. Select “Install from a list or Specific location (Advanced)” and then click the Next button.  
12. Insert the IBM Monitor CD into the CD drive and click the Have Disk button.  
13. Click OK.  
14. Ensure that the CD drive letter is selected, and then select the “DRIVERS”  
folder.  
15. Select IBM C190 CRT monitor and click OK. The files will be copied from  
the CD to your hard disk drive.  
16. Close all open windows and remove the CD.  
17. Restart the computer.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Controls  
The image is already optimised for many display modes. However, the controls can be used  
to adjust the image to your linking.  
OSD Key Function  
Icon  
Control  
Description  
Power switch  
OSD/OK  
Switches the monitor on and off.  
Activates the On-Screen-Display/ Select control icon /  
Save Adjustment  
Move right;  
Brightness adjustment  
selection  
Moves the highlight to the icon to the right, or on  
adjustment screens increases the effect of the  
adjustment.  
Move left;  
Contrast adjustment  
selection  
Moves the highlight to the icon to the left, or on  
adjustment screens decrease the effect of the  
adjustment.  
Exit  
Exit OSD control.  
Hotkey Functions  
Brightness and contrast can be adjusted as follows, without the need to display the OSD:  
Select the function and use the buttons to adjust. If adjustment is not made within 15 seconds, the  
current settings will be saved and the control screen will disappear automatically.  
Icon  
Control  
BRIGHTNESS  
Description  
Adjusts the background brightness  
CONTRAST  
Adjusts the contrast between foreground and background  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen-Display  
Activating the On-Screen-Display  
The monitor controls are accessed by pressing button to enable OSD (On-Screen-Display).  
The main menu will be displayed as follows.  
Each Sub-Menu icon is selected by highlighting it via the “ ” “ ” control and pressing  
button “ ” to select. To exit the main or Sub-Menu then press the exit button “  
”.  
Main OSD menu controls  
ICON  
Control  
Image Quality  
Function instruction  
Adjusts Brightness, Contrast, Moiré, and Degauss.  
Image Position/Size  
Image Shape  
Color  
Adjusts Horizontal / Vertical Position,  
Horizontal/Vertical Size, Zoom and Rotation.  
Adjusts Parallelogram, Trapezoid, Pincushion,  
Pincushion balance, and Geometry reset.  
Adjusts Preset color point, Custom, Reset User color.  
Adjusts Information, Menu Languages, Accessibility,  
Factory Default, Menu Position  
Options  
Exit  
Closes the OSD menu.  
OSD functions  
Note: After a function is selected, use the “ ” “ ” buttons to increase or decrease the  
adjustment. If the OK or Cancel button is not pushed within the menu time out period,  
the current setup will be saved and the control screen will disappear automatically.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image Quality  
Image Quality  
Sub menu  
Icon  
Control  
Brightness  
Function  
Adjusts overall screen  
brightness.  
Sub menu function  
Left  
Right  
Contrast  
Moiré  
Adjusts difference  
between light and dark  
areas.  
Reduces elliptical  
or wavy interference  
patterns.  
Left  
Right  
Horizontal  
Vertical  
/
/
Save  
Degauss  
Demagnetizes screen  
Yes/No Option  
to reduce image distortion.  
Image Position/Size  
Image  
Position/Size  
Sub menu  
Icon  
Control  
Function  
Sub menu function  
Left  
Horizontal  
Position  
Moves image left or right  
Right  
Left  
Vertical Position Moves image up or down  
Right  
Left  
Horizontal Size  
Adjusts image width  
Right  
Left  
Vertical Size  
Adjusts image height  
Right  
Zoom  
Adjusts image width and  
height  
Turns image clockwise or  
counterclockwise.  
/
/
Rotation  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image shape  
Image Shape  
Sub menu  
Icon  
Control  
Parallelogram  
Function  
Leans image to the left or  
right.  
Sub menu function  
Left  
Right  
Left  
Trapezoid  
Pincushion  
Adjusts top or bottom  
image width.  
Right  
Expands or contracts  
image sides.  
/
Pincushion  
balance  
Moves image center left or  
right.  
/
Geometry reset  
Resets image shape to  
original settings  
Yes/No Option  
Color  
Color  
Sub menu  
Icon  
Control  
Function  
Sub menu function  
Preset Color  
Point  
Select from standard white With three choices  
color 9300K / 6500K / 5500K  
Custom  
Adjusts red green and blue Red / Green / Blue / Save  
intensity  
Reset User  
Color  
Resets custom  
color to original value  
Yes / No Option  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Options  
Options  
Sub menu  
Icon  
Control  
Function  
Sub menu function  
Information  
Shows resolution, refresh  
rate, product details.  
Menu Language Changes language of  
menu.  
English, French, Italian, German,  
Spanish.  
Accessibility  
Changes Menu timings  
Button repeat  
rate  
Off /Default/Slow  
Option  
Menu time out 5/10/15/20/25/30  
second options  
Factory Default  
Menu Position  
Resets monitor to original  
settings  
Yes / No Option  
Adjusts menu location.  
Horizontal  
/
Vertical  
/
Save  
Exit.  
Closes the OSD menu.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Further information  
Display modes  
The display mode and monitor uses are controlled by the computer. Therefore, refer to your  
computer documentation for details on how to change display modes.  
The image size, position and shape may change when the display mode changes. This is  
normal and the image can be readjusted using the monitor controls.  
To ensure flicker-free operation, select the highest (non-interlaced) refresh rate both the  
computer and the monitor can support, (generally 75 Hz or higher), for the addressability that  
your application requires.  
For the display modes listed below, the screen image has been optimised during manufacture.  
Resolution  
720 x 400  
Refresh Rate  
70Hz  
Horizontal Frequency  
31.5kHz  
640 x 480  
60Hz  
31.5kHz  
640 x 480  
85Hz  
43.3kHz  
800 x 600  
75Hz  
46.9kHz  
800 x 600  
85Hz  
53.7kHz  
1024 x 768  
75Hz  
60.0kHz  
1024 x 768  
85Hz  
68.6kHz  
1280 x 1024  
1280 x 1024  
1600 x 1200  
Table1. Factory Preset Mode  
75Hz  
85Hz  
75Hz  
80.0kHz  
91.1kHz  
93.8kHz  
Power Management  
To benefit from power management, the monitor must be used in conjunction with a computer  
that implements the Video Electronics Standards Association (VESA) Display Power  
Management Signalling (DPMS) Standard.  
The power management feature is invoked when the computer recognizes that you have not  
used your mouse or keyboard for a user-definable period of time. There are several states as  
described in the table below.  
State  
Power  
indicator  
Green  
Screen  
Restoring Operation  
Compliance  
On  
Off  
Normal  
Blank  
Press a key or move the mouse.  
ENERGY STAR®  
Amber  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you have a problem setting up or using your monitor, you may be able to solve it yourself.  
Before calling your retailer or IBM you should try the suggested actions that are appropriate to  
your problem.  
Problem  
Screen is blank and  
power indicator is off.  
Possible Cause  
No power to monitor.  
Suggested Action  
Reference  
Connecting you  
Ensure the electrical  
outlet and the monitor monitor starting  
are both switched on.  
Check power cord is  
firmly plugged into the  
monitor and the  
electrical outlet.  
If the power cord plug  
has a removable fuse,  
replace it.  
on page4.  
Try another power  
cord.  
Try another electrical  
outlet.  
Adjust brightness and  
contrast.  
Screen is blank and  
power indicator is  
steady green.  
Brightness and  
Contrast may be too  
low.  
User controls  
section starting  
on page 9.  
SIGNAL OUT OF  
RANGE message is  
displayed.  
Display mode of the  
computer is outside  
the range of the  
monitor.  
Video cable  
connection.  
Reconfigure the  
computer to use a  
supported display  
mode.  
Check the signal  
cable is firmly  
Further  
information  
section starting  
on page 14.  
CHECK SIGNAL  
CABLE message is  
displayed.  
connected to the  
computer.  
Check no pins are  
bent in the signal  
cable connector.  
Press any key on the  
keyboard or move the  
mouse to restore  
operation.  
Screen is blank and  
power indicator is  
amber.  
The monitor is in  
Power Management  
Standby/Suspend or  
Off state.  
No video signal from  
the computer.  
Check the computer is  
powered on.  
Check the signal  
cable is firmly  
connected to the  
computer.  
Check no pins are  
bent in the signal  
cable connector.  
Reconfigure the  
computer to use a  
non-interlaced display section starting  
mode with a refresh  
rate of at least 75 Hz.  
Image appears to be  
flickering.  
The monitor is  
operating in an  
interlaced or low  
refresh rate display  
mode.  
Further  
information  
on page 14.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Possible Cause  
The monitor may be  
affected by  
interference from  
nearby equipment.  
Suggested Action  
Reference  
Move fluorescent  
desk lighting or any  
equipment that  
produces magnetic  
fields further away  
from the monitor.  
If another monitor is  
close by, separate the  
two monitors by at  
least 300mm (12 in.)  
for optimal  
performance.  
Move any equipment  
that produces  
Image appears to be  
discolored.  
The monitor may be  
affected by  
interference form  
nearby equipment.  
magnetic fields (For  
example, sub woofer  
loud speakers) further  
away form the  
monitor.  
If another monitor is  
close by, separate the  
two monitors by at  
least 300mm (12 in.)  
for optimal  
performance.  
Magnetization of  
monitor components  
has built up.  
Degauss the monitor using  
OSD manual demagnetize  
function. This function can  
only be used once in a 30  
minute period.  
Further help  
If you are unable to correct the problem yourself, you may seek further help as follows:  
Call IBM HELPCENTER.  
In the US call 1-800-772-2227  
In Canada (Toronto only) call 416-383-3344  
(All other areas) call 1-800-565-3344  
In other countries, contact your dealer, retailer, or other IBM authorized servicer.  
Before calling please have available as much of the following information as possible:  
1. Type, model and serial number form the label on the back of your monitor.  
2. Purchase receipt.  
3. Description of problem.  
4. Computer type and model.  
5. System configuration (additional hardware etc.).  
6. System BIOS version number.  
7. Operating System and version number.  
8. Display driver version number.  
9. Video Adapter Type  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If possible, stay by your computer system. Your technical support representative might want  
to go through the problem with you during the call.  
More help, late- breaking news and details of the latest accessories for these products may  
be found on the Worldwide Web at:  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
The C190 (MT6739) color monitor uses a 19-inch FFSM CRT with a viewable image size of  
457.3mm (18.0 in.).  
Dimensions  
Width:  
Depth:  
Height:  
Packing:  
Unpacking:  
Forward tilt:  
Backward tilt:  
Swivel:  
456 mm (17.95 in.)  
458 mm (18.03 in.)  
468 mm (18.42 in.)  
24.6 kg (54.23 lb)  
21.25 kg (46.85 lb)  
4.5°  
Weight  
Tilt Swivel  
15°  
+90°/-90°  
Image  
Maximum Height:  
Maximum Width:  
Dot Pitch:  
Supply Voltage:  
Max Supply Current:  
Input Signal:  
274.5 mm (10.80 in.)  
365.8 mm (14.40 in.)  
0.25 mm (0.0098 in.)  
100-240 V ac, 50-60Hz  
1.6A at 100 V ac  
Analog Direct Drive,  
75 ohm 0-0.7 V  
1600 pels (maximum)  
1200 lines (maximum)  
202.5 Mhz  
Power Input  
Video Input  
Horiz. Addressability:  
Vert. Addressability:  
Clock Rate  
Communications  
VESA DDC  
2B  
Synchronization Range  
Horiz. Frequency:  
Vert. Frequency:  
Normal Operation:  
Off:  
30 kHz-96 kHz  
50 Hz-160 Hz  
<100 W  
Power Consumption  
(Typical)  
<2 W  
Environment  
Operating Temperature:  
Storage Temperature:  
Shipping Temperature:  
5 to 40 °C (41 to 104 °F)  
-20 to 65 °C (-4 to 149 °F)  
-20 to 65 °C (-4 to 149 °F)  
Operating Humidity:  
Storage Humidity:  
Shipping Humidity:  
Emissions:  
10 to 90 %  
10 to 95 %  
10 to 95 %  
TCO03/TCO99  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service Information  
The following parts are for use by IBM Service, or IBM authorized dealers, to support the  
customer warranty. Parts are for service use only.  
Part Number  
31P9687  
31P9688  
31P9721  
31P9689  
31P9690  
31P9691  
31P9692  
31P9696  
Machine type-6739  
6739 K0N  
6739 60N  
Description  
Two Tone Black  
Stealth Black  
Stealth Black  
Two Tone Black  
Stealth Black  
Two Tone Black  
Stealth Black  
Stealth Black  
6739 70N  
6739 K0E  
6739 60E  
6739 K0S  
6739 60S  
Tilt/Swivel  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices and Trademarks  
This section contains information on notices and trademarks.  
Notices  
IBM may not offer the products, services, or features discussed in this document in all  
countries. Consult your local IBM representative for information on the products and services  
currently available in your area. Any reference to an IBM product, program, or service is not  
intended to state or imply that only that IBM product, program, or service may be used. Any  
functionally equivalent product, program, or service that does not infringe any IBM intellectual  
property right may be used instead. However, it is the user’s responsibility to evaluate and  
verify the operation of any non-IBM product, program, or service.  
IBM may have patents or pending patent applications covering subject matter described in  
this document. The furnishing of this document does not give you any license to these  
patents. You can send license inquiries, in writing, to:  
IBM Director of Licensing  
IBM Corporation  
North Castle Drive  
Armonk, NY 10504-1785  
U.S.A.  
The following paragraph does not apply to the United Kingdom or any country where  
such provisions are inconsistent with local law: INTERNATIONAL BUSINESS  
MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIEDWARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of  
express or implied warranties in certain transactions; therefore, this statement may not apply  
to you.  
This information could include technical inaccuracies or typographical errors. Changes are  
periodically made to the information herein; these changes will be incorporated in new  
editions of the publication. IBM may make improvements and/or changes in the product(s)  
and/or the program(s) described in this publication at any time without notice.  
IBM may use or distribute any of the information you supply in any way it believes appropriate  
without incurring any obligation to you.  
Any references in this publication to non-IBM Web sites are provided for convenience only  
and do not in any manner serve as an endorsement of those Web sites. The materials at  
those Web sites are not part of the materials for this IBM product, and use of those Web sites  
is at your own risk.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trademarks  
The following terms, used in this publication, are trademarks or service marks of the IBM  
Corporation in the United States, other countries, or both:  
IBM logo, HelpCenter and IBM.  
ENERGY STAR is a U.S. Govt. registered trademark.  
Microsoft Windows, and Windows NT are trademarks of Microsoft  
Corporation in the United States, other countries, or both.  
Other company, product, and service names may be trademarks or service  
marks of others.  
© Copyright International Business Machines Corporation 2003. All  
rights reserved.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Inc Paint Sprayer XM Series User Manual
Grizzly Drill G8593 User Manual
Grundig Hair Clippers mc3540 User Manual
Haier Microwave Oven HMV1630DBBB User Manual
Hasbro Games Talking Phone User Manual
HP Hewlett Packard Switch 2512 User Manual
Huawei Network Card E156G User Manual
IBM Switch BDM 610000049 User Manual
IKEA Washer IWM60 User Manual
Image Treadmill ICTL39522 User Manual