XM Plural-Component
Sprayers
High-Pressure Equipment for Protective Coatings
Download from Www.Somanuals.com. All Manuals Search And Download.
Build a System for Your Application
Fully configurable – simply select the accessories required for your material and application
More flexibility means more affordability
With Graco XM Plural-Component Sprayers, you have the flexibility to select the essential equipment on your system – no more, no less – to
complete your jobs accurately and reliably. If your application does not require heaters, feed pumps or hoppers, this flexibility may provide you
with a lower cost option. The components shown below are available as options on your configured unit. Some assembly is required.
Junction Box
Transfer pumps
• Conveniently houses switches
and breakers for heaters
®
• Choose Graco T2 or Monark 5:1
• Not approved for
explosive atmospheres
®
Twistork Agitator
• Helps maintain proper
material consistency
Material Hoppers
Hose Rack Kit
• Side or rear-mount
• Choose 20-gal or 7-gal
(76 or 26 liter)
®
Viscon Fluid Heaters
• Choose standard or
model approved for
explosive atmospheres
Rear Mounted Hoppers
Hopper Heater
• Excellent for highly viscous materials
• Standard 240-volt, 1500 watt immersion heaters
• Use optional circulation kit (256273*)
for explosive atmospheres
*Viscon fluid heater approved for use
in explosive atmospheres must be ordered separately
Caster Kit
Graco XM Plural-Component Sprayer (base model plus options)**
3
Download from Www.Somanuals.com. All Manuals Search And Download.
** Not approved for use in explosive atmospheres unless the base model, all accessories and wiring comply with national, state and local codes
Performance You Can Trust
Advanced technology that boosts your productivity
Packed with features
Whether your application requires a basic machine or one that is fully loaded, the Graco XM provides the technology and performance
you need to get the job done faster and more efficiently than ever before.
Advanced controls
The user interface on the Graco
XM is intuitive and simple to use.
It provides two display modes:
“setup” for entering parameters
and a basic “run” mode for
everyday operation. The user
interface monitors and tracks
pressure, temperature and flow,
and allows you to program
maintenance schedules as well.
With a conveniently located
USB port, you can easily
access and download
historical spraying data.
Precise mixing and ratio assurance
Material mixing reaches a new level of precision due to new dosing technology.
With the Graco XM, the minor component (or side B material) is injected at high
pressure into the major material (side A). Advanced sensors allow pumps to
compensate for pressure fluctuations, resulting in accurate, on-ratio mixing
for better yield and less waste.
Choose standard, frame-mounted
mix manifold or remote mix
manifold; both include
a pressure gauge
that displays fluid
output pressure.
Remote Mix Manifold
Standard Mix Manifold
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications & Configurable Options
Everything you need to make an informed decision
Technical Specifications
Dimensions
Ambient temperature range
Base Unit (no hoppers) ................................... 39W x 70H x 38D in (99 x 178 x 97 cm)
Operating ........................................................................... 32° to 130°F (0° to 54°C)
Side mounted hoppers ................................. 99W x 70H x 38D in (252 x 178 x 97 cm)
Storage............................................................................. 30° to 160°F (-1° to 71°C)
Rear mounted hoppers............................... 57W x 70H x 65D in (145 x 178 x 165 cm) Weight
Base machine................................................................................... 1160 lb (526 kg)
Mix ratio range .............................................................. 1:1 to 10:1 (in 0.1 increments)
Ratio tolerance range ....................................................................................... +/- 5%
(No heaters, hoppers or junction box)
Fully configured ................................................................................ 1550 lb (703 kg)
Fluid filtration ............................................................... 60 mesh (238 micron standard)
(not included on some models)
(Includes heated hoppers, feed pumps, heaters and junction box)
Sound pressure .................................................... 86 dBA at 100 psi (7.0 bar, 0.7 MPa)
Flow rates
Fluid viscosity range........................................................................... 200-20,000 cps
(heavier viscosities can be sprayed using heat, recirculation and/or pressure feeding)
Minimum.................................................................................... 1 qt/min (0.95 lpm)*
Maximum...................................................................................... 3 gpm (11.4 lpm)*
Wetted parts
*Actual flow rates vary by material type
Suction tubes.............................................................................................. Aluminum
Air inlet ........................................................................................................ 3/4 npt (f)
Fluid inlets without feed kits ................................................................... 1-1/4 npt (m)
Flush pump ........................................................... Stainless steel, aluminum, carbide,
UHMWPE and PTFE
Max mixed fluid working pressure
50:1.............................................................................. 5200 psi (358 bar, 35.8 MPa)
Hoses............................................................................................................... Nylon
Pumps (A and B)............................... Carbon steel, alloy steel, 303, 440, 17-ph grades
stainless steel, zinc and nickel plating, ductile iron,
tungsten carbide, and PTFE
70:1.............................................................................. 6300 psi (434 bar, 43.4 MPa)
Air supply pressure range.........................50-150 psi (3.5 to 10.3 bar, 0.35 to 1.0 MPa)
Max pump air set pressure
Metering valves .................... Carbon steel, nickel plating, carbide, polyethylene, leather
50:1................................................................................... 100 psi (7.0 bar, 0.7 MPa)
Manifold................................. Carbon steel, nickel plating, carbide, 302 stainless steel,
PTFE, UHMWPE
70:1................................................................................... 90 psi (6.2 bar, 0.62 MPa)
Max pump inlet fluid pressure............................................... 250 psi (17 bar, 1.7 MPa)
Mixer ....................................................... Stainless steel housing with acetal elements
3
Max air consumption at 100 psi (0.7 MPa, 7.0 bar) ......... 75 scfm/gpm (0.56 m /min/lpm)
Spray gun................................................... Stainless steel, acetal, polyethylene, nylon,
polypropylene, carbide, polyurethane, solvent-resistant o-rings
Configurable options loaded with features
Hoppers
Viscon Fluid Heater*
Transfer Pumps*
Twistork Agitators
20-gal (76 l) hoppers are:
• Jacketed for heated water or oil
• 240 VAC, 4000 watts
• Feeds material to main pumps
• Helps maintain proper
material consistency
• Other voltage options
sold separately
• Recommended for highly
viscous materials
• Easily mounts on 20-gal (76 l)
hoppers or drums
• Made of rugged,
double-wall polyethylene
• Easily mounts to 20-gal
(76 l) hoppers or drums
• Approved for use
in explosive atmospheres
• Available in heated* or standard
• Choose Graco T2 or
Monark 5:1 transfer pump
7-gal (26 l) hoppers are:
•
Excellent for high ratio applications
5
* Models approved for explosive atmospheres are available
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering Information
For genuine Graco products, see your nearest Graco distributor, or call 877-844-7226
Base Unit Includes:
• Frame
• Flush pump
• Dosing valves
• Mix manifold
• Controls
• USB port
• Xtreme Pumps
• Xtreme-Duty Hose
• Two static mixers
• XTR-7 Gun
• Your choice of power supply
• Recirculation kit
Accessory Kits for XM50 and XM70
255963
256257
256273
256259
256170
256980
256512
256262
256263
256274
20-gal (76 l) hopper (heat source not included)
Hopper heater kit, 240V
Hopper/hose heat circulation kit (heater not included)
20-gal (76 l) hopper mounting bracket kit
Hopper fluid outlet kit
Remote mix manifold conversion kit
Desiccant kit (for use with 20-gal (76 l) hoppers)
Caster kit
256275
256276
256232
256255
256260
256653
256876
256433
256991
T2 2:1 feed pump kit
Monark 5:1 feed pump kit
Dual agitator & 2:1 drum feed pump kit
Dual agitator & 5:1 drum feed pump kit
7-gal (26 l) hopper installation kit
Lower strainer and valve kit
Electric heated hose power supply kit
™
President 10:1 drum feed kit
Hose rack kit
Twistork agitator kit
Alternator conversion kit
5600 psi
7250 psi
Xtreme-Duty High-Pressure Hoses
H x x x x x
Choose the Right Hose for the Job
Technical Specifications
Working pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5600 psi (386 bar), or 7250 psi (500 bar)
Temperature rating (all sizes). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40˚ to 180˚F (-40˚ to 82˚C)
Chemical resistance. . . . . . . . Hose cover resistant to a wide variety of solvents, acids and bases
Product Identifier:
H = Hose
Pressure Rating:
5: 5600 psi
7: 7250 psi
Hose Diameter:
25: 1/4 in (6.4 mm)
38: 3/8 in (9.5 mm)
50: 1/2 in (12.7 mm)
Weather resistance . . . . . . . . . . . . . . . . . . . . . Hose cover has outstanding resistance to oxygen,
ozone, sunlight and general weather conditions
Length:
Electrical properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conductive hose
Example:
H53850 is a 5600 psi,
3/8 in, 50 ft hose
03: 3 ft (0.9 m)
06: 6 ft (1.8 m)
10: 10 ft (3.0 m)
25: 25 ft (7.6 m)
50: 50 ft (15.2 m)
1X: 100 ft (30.5 m)
Xtreme-Duty 5600 psi (386 bar) High-Pressure Hose
Hose
Xtreme-Duty 7250 psi (500 bar) High Pressure-Hose
Female
NPSM
Hose
Female
NPSM
Part #
Length
Diameter
Part #
Length
Diameter
H52503
H52506
H52510
H52525
H52550
H5251X
H53803
H53806
H53810
H53825
H53850
H5381X
H55010
H55025
H55050
H5501X
3 ft (0.9 m)
6 ft (1.8 m)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
1/2 in (12.7 mm)
1/2 in (12.7 mm)
1/2 in (12.7 mm)
1/2 in (12.7 mm)
1/4 in
1/4 in
1/4 in
1/4 in
1/4 in
1/4 in
3/8 in
3/8 in
3/8 in
3/8 in
3/8 in
3/8 in
1/2 in
1/2 in
1/2 in
1/2 in
H72503
H72506
H72510
H72525
H72550
H7251X
H73803
H73806
H73810
H73825
H73850
H7381X
H75010
H75025
H75050
H7501X
3 ft (0.9 m)
6 ft (1.8 m)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
1/4 in (6.4 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
3/8 in (9.5 mm)
1/2 in (12.7 mm)
1/2 in (12.7 mm)
1/2 in (12.7 mm)
1/2 in (12.7 mm)
1/4 in
1/4 in
1/4 in
1/4 in
1/4 in
1/4 in
3/8 in
3/8 in
3/8 in
3/8 in
3/8 in
3/8 in
1/2 in
1/2 in
1/2 in
1/2 in
10 ft (3.0 m)
25 ft (7.6 m)
50 ft (15.2 m)
100 ft (30.5 m)
3 ft (0.9 m)
10 ft (3.0 m)
25 ft (7.6 m)
50 ft (15.2 m)
100 ft (30.5 m)
3 ft (0.9 m)
6 ft (1.8 m)
6 ft (1.8 m)
10 ft (3.0 m)
25 ft (7.6 m)
50 ft (15.2 m)
100 ft (30.5 m)
10 ft (3.0 m)
25 ft (7.6 m)
50 ft (15.2 m)
100 ft (30.5 m)
10 ft (3.0 m)
25 ft (7.6 m)
50 ft (15.2 m)
100 ft (30.5 m)
10 ft (3.0 m)
25 ft (7.6 m)
50 ft (15.2 m)
100 ft (30.5 m)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Airless Guns
XTR-5 Airless Spray Gun
XTR-7 Airless Spray Gun
Maximum working pressure: 5000 psi (345 bar, 34.5 MPa)
Maximum working pressure: 7250 psi (500 bar, 50.0 MPa)
XTR500
XTR501
XTR502
XTR503
XTR504
XTR505
One inch round handle, four-finger trigger, no tip
XTR700
XTR701
XTR702
XTR703
XTR704
XTR705
Round handle, four-finger trigger, no tip
Round handle, four-finger trigger, 519 flat tip
Oval-insulated handle, four-finger trigger, 519 XHD RAC tip
Oval-insulated handle, two-finger trigger, 519 XHD RAC tip
Round handle, four-finger trigger, 519 XHD RAC tip
Round handle, two-finger trigger, 519 XHD RAC tip
One inch round handle, four-finger trigger, 519 flat tip
Oval-insulated handle, four-finger trigger, 519 XHD RAC tip
Oval-insulated handle, two-finger trigger, 519 XHD RAC tip
One inch round handle, four-finger trigger, 519 XHD RAC tip
One inch round handle, two-finger trigger, 519 XHD RAC tip
Gun Accessories
Accessories
287450
287449
287451
246294
246295
246296
Two-finger Trigger Kit
Four-finger Round Trigger Kit
Four-finger Oval Insulation Trigger Kit
10 in (254 mm) Gun Extension, 7250 psi (500 bar, 50 MPa)
15 in (380 mm) Gun Extension, 7250 psi (500 bar, 50 MPa)
18 in (457 mm) Gun Extension, 7250 psi (500 bar, 50 MPa)
246297
248837
245994
287032
287033
287034
180º spray nozzle, 7/8-14 UNC-2B, 7250 psi (500 bar, 50 MPa)
Gun Repair Kit, Includes Gasket, Needle and Seat
GHD Tip Guard Kit
Filter, 60 Mesh
Filter, 100 Mesh
Filter, 60 and 100 Mesh Combination
XHD RAC SwitchTip
Graco XHD Guard
XHD001
XHD010
XHD RAC Guard for pressures up to 7250 psi (500 bar, 50.0 MPa)
Seat and Seal Kit (5-pack)
Other Accessories
Heated Hose - 5000 psi (345 bar, 34.5 MPa), 50 ft (15 m)
Viscon HP Fluid Heaters - Compatible with Graco XM junction box
Not approved for explosive atmospheres
Not approved for explosive atmospheres
248907
248908
Hose Set, ID 1/4 (A) x 3/8 (B) (6.3 x 9.5 mm)
Hose Set, ID 3/8 (A) x 3/8 (B) (9.5 x 9.5 mm)
245867
245868
245869
246276
245870
Non-hazardous location,120 VAC, 2300 watts, 19.2 amps
Non-hazardous location, 200 VAC, 4000 watts, 20.0 amps
Non-hazardous location, 240 VAC, 4000 watts, 16.7 amps
Non-hazardous location, 380 VAC, 4000 watts, 10.5 amps
Non-hazardous location, 480 VAC, 4000 watts, 8.3 amps
Fittings
15B729
150287
214925
236987
189018
156971
165198
162449
159239
158491
Coupling, 7250 psi (500 bar, 50.0 MPa), 3/8 npt (f) x 3/8 npsm (m)
Coupling, 7250 psi (500 bar, 50.0 MPa), 3/8 npt (f) x 1/4 npt (m)
Swivel, 5000 psi (345 bar, 34.5 MPa), 3/8 npt (f) x 1/4 npsm (f)
Swivel, 7250 psi (500 bar, 50.0 MPa), 1/4 npsm (m) x 1/4 npsm (f)
Swivel, 5800 psi (399 bar, 39.9 MPa), 1/4 npsm (m) x 1/4 npsm (f)
Nipple, 7250 psi (500 bar, 50.0 MPa), 1/4 npt x 1/4 npt (mbe)
Nipple, 7250 psi (500 bar, 50.0 MPa), 1/4 npt x 3/8 npt (mbe)
Nipple, 7250 psi (500 bar, 50.0 MPa), 1/4 npt x 1/2 npt (mbe)
Nipple, 7250 psi (500 bar, 50.0 MPa), 3/8 npt x 1/2 npt (mbe)
Nipple, 7250 psi (500 bar, 50.0 MPa), 1/2 npt x 1/2 npt (mbe)
Pump Lower Filter Screens
2-Pack
224458
224459
224468
25-Pack
238436
238438
238440
Description
30 mesh (595 micron), 145cc, 180cc, 220cc, 250cc, 290cc
60 mesh (290 micron), 145cc, 180cc, 220cc, 250cc, 290cc
100 mesh (149 micron), 145cc, 180cc, 220cc, 250cc, 290cc
Other Accessories
511352
15E592
246078
246456
248927
206995
206996
Static mixer, 3/8 npt SST pipe, 12 SST element, 7250 psi
Static mixer housing, 3/8 npt SST, 7250 psi. Uses plastic element below
Scuff guard, 50 ft (15.2 m) braided polyethylene mesh
Scuff guard, 50 ft (15.2 m) polyethylene bag
Element mixer kit, plastic 12 element sticks, 25 pack
Graco throat seal liquid (TSL), 1 qt (0.9 l)
Viscon HP Fluid Heaters - Compatible with Graco XM junction box
Approved for explosive atmospheres
245848 Hazardous location, 120 VAC, 2300 watts, 19.2 amps
245862 Hazardous location, 200 VAC, 4000 watts, 20 amps
245863 Hazardous location, 240 VAC, 4000 watts, 16.7 amps
246254 Hazardous location, 380 VAC, 4000 watts, 10.5 amps
245864 Hazardous location, 480 VAC, 4000 watts, 8.3 amps
Graco throat seal liquid (TSL), 1 gal (3.8 l)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT GRACO
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
INDIA
MAILING ADDRESS
P.O. Box 1441
Minneapolis, MN 55440-1441
Tel: 612.623.6000
GRACO LOCATIONS
ASIA PACIFIC
Graco Hong Kong Ltd.
India Liaison Office
AUSTRALIA
Graco Australia Pty Ltd
Suite 17 2 Enterprise Drive
Bundoora Victoria 3083
Australia
Room 103, Level 4, Augusta Point
Golf Course Road
Gurgaon, Haryana, India 122001
Tel: +91.124.435.4208
Fax: +91.124.435.4001
Fax: 612.623.6777
Tel: 61 3 9467 8558
Fax: 61 3 9467 8559
AMERICAS
JAPAN
MINNESOTA
Graco K.K.
Worldwide Headquarters
Graco Inc.
CHINA
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel: 81.45.593.7300
Fax: 81.45.593.7301
Graco Hong Kong Ltd.
Shanghai Representative Office
Room 118 1st Floor
No.2 Xin Yuan Building
No.509 Cao Bao Road
Shanghai, P.R. China 200233
Tel: 86.21.649.50088
Fax: 86.21.649.50077
88-11th Avenue N.E.
Minneapolis, MN 55413
EUROPE
KOREA
Graco Korea Inc.
4th Floor. Shinhan Bank Building
#1599
BELGIUM
European Headquarters
Graco N.V.
Gwanyang-dong, Dongan-ku,
Nayang-si Korea
431-060
Tel: 82 31 476 9400
Fax: 82 31 476 9801
Industrieterrein-Oude Bunders
Slakweidestraat 31
3630 Maasmechelen,
Belgium
Tel: 32.89.770.700
Fax: 32.89.770.777
Call today for product information or to request a demonstration.
SALES/
DISTRIBUTION/
SERVICE
877.84GRACO (1-877-844-7226) or visit us at www.graco.com.
Graco Inc. is registered to I.S. EN ISO 9001
North America
Customer Service
800-328-0211
Fax 877-340-6427
©2009 Graco Inc. 340146 Rev. A 3/09 All written and visual data contained in this document are based on the latest product information available at the time
of publication. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and
are trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Grizzly Patio Furniture H7772 User Manual
Grizzly Planer G9740 User Manual
H2O Audio Carrying Case iN5 70 User Manual
HANNspree Flat Panel Television K223 10A1 User Manual
Harbor Freight Tools Air Compressor 93657 User Manual
Honeywell Saw HWC ARM WEH QS User Manual
Hotpoint Washer FEW10 User Manual
HP Hewlett Packard Server 704941001 User Manual
Husky Nail Gun HD349000 User Manual
Husqvarna Car Seat DS 50 User Manual