IBM Computer Accessories CDI5UG1107 User Manual

IBM Sterling Connect:Direct for i5/OS  
User’s Guide  
Version 3.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
About Sterling Connect:Direct for i5/OS  
®
®
®
IBM Sterling Connect:Direct for i5/OS is an enterprise solution for secure, automated file delivery  
between business applications. Its session management and extended recovery features help assure data  
delivery in support of 24 hours a day, 7 days a week business operations. It links technologies, moves all types  
of information, and manages high-performance transfers by providing easy-to-use automation,  
checkpoint/restart, and error recovery. Sterling Connect:Direct offers choices in communication protocols,  
hardware platforms, and operating systems. It provides the flexibility to move information from mainframes to  
midrange systems to desktop and LAN-based workstations.  
Interfacing with Sterling Connect:Direct for i5/OS  
When you install Sterling Connect:Direct for i5/OS, you create Control Language (CL) commands that enable  
you to use Sterling Connect:Direct. These CL commands enable you to send or receive data from other nodes  
running Sterling Connect:Direct. You can also use the CL commands to administer Sterling Connect:Direct.  
For example, you can use a CL command to display Sterling Connect:Direct message descriptions.  
Issuing Sterling Connect:Direct CL Commands  
Issue Sterling Connect:Direct CL commands interactively from the command line or use them in a CL  
program. Results of CL commands that interact with a remote node are recorded in three places:  
Sterling Connect:Direct log  
User message queue of the local i5/OS node  
Statistics facility of the local and remote Sterling Connect:Direct node  
Chapter 2, Using Control Language, provides information about CL commands, CL programming, and  
Sterling Connect:Direct CL commands.  
Understanding Sterling Connect:Direct for i5/OS Components  
The Sterling Connect:Direct for i5/OS has several components that enhance its compatibility with other  
Sterling Connect:Direct platforms and run under the Sterling Connect:Direct subsystem:  
Process Manager (PMGR)  
The PMGR initializes and manages the Sterling Connect:Direct environment. PMGR is always active  
when Sterling Connect:Direct for i5/OS is active.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
8
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Queue Manager (QMGR)  
The QMGR manages the Sterling Connect:Direct Process queue. The QMGR is always active when  
Sterling Connect:Direct for i5/OS is active.  
Timer (TIMER)  
The TIMER component provides timer services to the session manager, the process queue manager, and  
other Sterling Connect:Direct for i5/OS components. The TIMER runs as a separate i5/OS job, submitted  
and controlled by the Process Manager component. The TIMER is always present when Sterling  
Connect:Direct for i5/OS is active.  
Statistics Manager (STATMGR)  
Sterling Connect:Direct for i5/OS logs statistics information for all Processes. Each component of Sterling  
Connect:Direct for i5/OS generates statistics data to the STATMGR job. The long-running STATMGR  
job formats the statistics information and writes it to the statistics file. The Statistics Manager supports CL  
commands that provide the ability to schedule the creation, archival, and deletion of statistics file  
members. The STATMGR is always active when Sterling Connect:Direct for i5/OS is active.  
Spool Monitor (SPLMON)  
The Sterling Connect:Direct SPLMON is a variable component of Sterling Connect:Direct for i5/OS.  
CDSPLMON uses Spool Monitor entries to associate output queues with destination Sterling  
Connect:Direct nodes.  
TCP Listener (TCPLIST)  
The TCPLIST is a long-running job started and controlled by the Process Manager component.  
CDTCPLIST processes incoming TCP/IP connection requests and requests session managers from the  
PMGR.  
Session Manager (SMGR)  
The SMGR component executes the Sterling Connect:Direct Processes. The Process Manager starts all  
session managers except for SMGRs started by the LU6.2 evoke function. Evoked SMGRs request  
permission to run from the PMGR and continue processing.  
Connecting Sterling Connect:Direct for i5/OS to Sterling  
Connect:Direct/Plex  
Sterling Connect:Direct for i5/OS can be connected to Sterling Connect:Direct/Plex, which is a Sterling  
Connect:Direct for z/OS system consisting of a Sterling Connect:Direct/Manager and one or more Sterling  
Connect:Direct/Servers in a TCP/IP environment. Once the connection between Sterling Connect:Direct for  
i5/OS and Sterling Connect:Direct/Plex has been defined, each system can initiate sessions to the other. All  
requests to initiate sessions to the Sterling Connect:Direct/Plex system go through the Sterling  
Connect:Direct/Manager, which controls the traffic and determines which Sterling Connect:Direct/Server can  
run a particular Process based on the PLEXCLASS of the Sterling Connect:Direct/Server and the Process  
coming from the Sterling Connect:Direct for i5/OS system. One advantage of routing the Processes through the  
Sterling Connect:Direct/Plex Manager is that you only have to define a single network map entry for the  
Sterling Connect:Direct/Plex Manager rather than creating separate node entries for each Sterling  
Connect:Direct/Plex Server.  
The PLEXCLASS parameter represents a type of server in the Sterling Connect:Direct/Plex system. In the  
example illustrated in the graphic, there is one Sterling Connect:Direct for i5/OS system connected to a  
Sterling Connect:Direct/Plex system called CD.PROD1. CD.PROD1 consists of a Sterling  
Connect:Direct/Manager and two Sterling Connect:Direct/Servers. Both Sterling Connect:Direct/Servers  
support the CLASS1 PLEXCLASS but only Sterling Connect:Direct/Server 1 can process the TAPE  
PLEXCLASS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
About Sterling Connect:Direct for i5/OS  
9
When the Sterling Connect:Direct/Manager receives a Process that requires PLEXCLASS=CLASS1 and  
determines that both Sterling Connect:Direct/Servers support CLASS1, it routes the Process to the Sterling  
Connect:Direct/Server with the lowest workload.  
For more information on the PLEXCLASS parameter, see the CL command to execute in the IBM Sterling  
Connect:Direct for z/OS environment in the IBM Sterling Connect:Direct for i5/OS User’s Guide.  
Remote node  
Remote node  
Remote node  
PLEXCLASS(TAPE)  
PLEXCLASS(CLASS1)  
PLEXCLASS(CLASS1)  
Connect:Direct/Plex  
CD.PROD1  
Connect:Direct/Server 2  
Connect:Direct/Manager  
Connect:Direct/Server 1  
TCP/IP  
Remote node  
Remote node  
Connect:Direct OS/400  
Accessing Sterling Connect:Direct Through the Main Menu  
Sterling Connect:Direct for i5/OS includes an i5/OS system-style menu that allows you to execute Sterling  
Connect:Direct Command Language commands and related i5/OS CL commands from a menu. This menu  
consists of two screens.  
Issuing CL Commands Through the Main Menu  
The first screen allows you to issue basic Sterling Connect:Direct commands. The second screen allows you to  
issue administration Sterling Connect:Direct commands. Each screen contains a full-function i5/OS command  
line and function key descriptions near the bottom of the screen.  
To access the Main Menu:  
1. Type STRCDMNU and press Enter. The Sterling Connect:Direct for i5/OS copyright screen is displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
10  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
2. Press Enter. The Sterling Connect:Direct Main Menu displays the Sterling Connect:Direct for i5/OS  
functions that you can perform from this screen.  
CMDCD  
Connect:Direct (tm)  
System:  
FRAN  
Select one of the following:  
1. Send file to remote node  
2. Receive file from remote node  
3. Send spooled file to remote node  
4. RUNTASK on remote node  
5. RUNJOB on remote node  
6. SUBMIT process on remote node  
7. Submit local process  
8. Compress file  
CDSND  
CDRCV  
CDSNDSPL  
CDRUNTASK  
CDRUNJOB  
CDSUBMIT  
CDSUBPROC  
CDCOMP  
9. Decompress file  
10. Display C:D Version and PTF level  
CDDECOMP  
CDVER  
11. Display Connect:Direct message description  
12. Work with Connect:Direct processes  
13. Select Connect:Direct statistics  
DSPCDMSGD  
WRKCDPROC  
CDSELSTAT  
More...  
Selection or command  
===>________________________________________________________________________________  
__________________________________________________________________________________  
F3=Exit  
F4=Prompt  
F9=Retrieve  
F12=Cancel  
(C) COPYRIGHT 1991, 2002 Sterling Commerce, Inc.  
Accessing the Administration Menu  
Option 20 on the Sterling Connect:Direct Main Menu provides access to the following Administration  
Menu.  
Note: To use the Sterling Connect:Direct administration commands, you must have administrative authority  
on the system.  
CDADMIN  
Connect:Direct Administration  
System:  
FRAN  
Select one of the following:  
Connect:Direct Configuration  
1. Work with Connect:Direct parameters  
2. Work with Connect:Direct Netmap  
3. Work with Connect:Direct users  
4. Work with Spool Monitor entries  
5. Create Connect:Direct XTRAN table  
6. Secure+ Admin Utility  
WRKCDPARM  
WRKCDNTMP  
WRKCDUSR  
WRKSPLMONE  
CRTCDXTTBL  
SPADMIN  
Connect:Direct Administration  
11. Start Connect:Direct subsystem  
12. End Connect:Direct subsystem  
13. Work with Connect:Direct status  
14. Work with Connect:Direct processes  
STRCD  
ENDCD  
WRKCDSTS  
WRKCDPROC  
More...  
Selection or command  
===>________________________________________________________________________________  
__________________________________________________________________________________  
F3=Exit  
F4=Prompt  
F9=Retrieve  
F12=Cancel  
(C) COPYRIGHT 1991, 2002 Sterling Commerce, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
About Sterling Connect:Direct for i5/OS  
11  
The Connect:Direct Administration menu consists of two screens. Access the second screen by pressing the  
page down key.  
CDADMIN  
Connect:Direct (tm) Administration  
System:  
FRAN  
Select one of the following:  
Connect:Direct Statistics.  
21. Select Connect:Direct statistics  
22. Archive Connect:Direct stat member  
23. Create Connect:Direct stat member  
24. Delete Connect:Direct stat member  
25. Restore Connect:Direct stat member  
26. Display Connect:Direct stat information  
CDSELSTAT  
CDARCSTATM  
CDCRTSTATM  
CDDLTSTATM  
CDRSTSTATM  
CDDSPSTATI  
Communications  
31. Vary communications device  
32. Configure TCP/IP  
33. Start TCP/IP  
VRYCFG  
CFGTCP  
STRTCP  
34. Work with TCP/IP status  
WRKTCPSTS  
Bottom  
Selection or command  
===>________________________________________________________________________________  
__________________________________________________________________________________  
F3=Exit  
F4=Prompt  
F9=Retrieve  
F12=Cancel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
12  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
Using Control Language  
Sterling Connect:Direct for i5/OS uses Sterling Connect:Direct CL commands to perform Sterling  
Connect:Direct functions.  
Sterling Connect:Direct CL commands have the following general i5/OS CL command format:  
Each command can have required and optional parameters and subparameters that provide additional  
information needed to run the command.  
Subparameters are always positional.  
Each parameter provides a specific type of information or instruction.  
Each command is followed by one or more keywords and parameter pairs in the following format:  
COMMAND keyword(parameter) keyword(parameter) ...  
The following example shows a sample Sterling Connect:Direct CL command:  
CDRCV SNODE(DALLAS.OS390) SNODENVIRN(OS390)  
FDSN(DALLAS.ACCT.DATA)  
TDSN(‘ACCOUNT/DATA’)  
TOSYSOPTS(‘TYPE(FILE)’)  
Reviewing Sterling Connect:Direct CL Command Functions  
The following table lists the Sterling Connect:Direct for i5/OS command names and their functions.  
Command  
Function  
CDARCSTATM  
CDCOMP  
Compress and delete a statistics file member other than the active one.  
Compress a file on the i5/OS node before sending it to a remote node.  
Create a new statistics file member and log statistics to that new member.  
Decompress files received from another node and archived on the i5/OS node as compressed files.  
Turns VARY on and off on devices used by Sterling Connect:Direct.  
Deletes members from the archive statistics database file.  
CDCRTSTATM  
CDDECOMP  
CDDEVACTG  
CDDLTARCST  
CDDLTSTATM  
Delete a specified statistics file member other than the active one.  
Administrative commands  
Sterling Connect:Direct Secure Plus for i5/OS commands  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
14  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Command  
Function  
CDDSPSTATI  
CDRCV  
Display information about where statistics are being logged.  
Receive data from a remote node.  
CDRSTSTATM  
CDSELSTAT  
CDRUNJOB  
CDRUNTASK  
CDSND  
Decompress selected statistics file members to a user-designated file.  
Select statistics records and retrieve information about the active statistics file.  
Submit a job in batch mode on a remote node.  
Execute a Sterling Connect:Direct Run Task function on a remote node.  
Send data to a remote node.  
CDSNDSPL  
CDSUBMIT  
CDSUBPROC  
CDVER  
Send a spooled file to a remote node.  
Submit a Process to a remote node to initiate Sterling Connect:Direct work on the remote node.  
Submit Sterling Connect:Direct Processes to the process queue for asynchronous execution.  
Display the installed Sterling Connect:Direct version and Sterling Connect:Direct PTF level.  
Convert Sterling Connect:Direct network map file.  
CNVNTMPF  
CNVUSRF  
CRTCDOBJ  
CRTCDXTTBL  
DSPCDMSGD  
ENDCD  
Convert Sterling Connect:Direct user file.  
Create Sterling Connect:Direct objects.  
Create and update the translation table.  
Display the text for the specified message ID.  
End a Sterling Connect:Direct for i5/OS node and components.  
Identifies Processes to place in the Hold queue.  
HLDCDPROC  
RLSCDPROC  
STRCDTCPL  
UNINSTALLM  
UPDATECD  
WRKCDPARM  
†‡SPADMIN  
STRCD  
Releases identified Processes from the Hold queue.  
Starts the Sterling Connect:Direct TCP listener.  
Uninstalls the latest Sterling Connect:Direct maintenance installation.  
Installs Sterling Connect:Direct maintenance.  
View and change Sterling Connect:Direct initialization parameter values.  
IBM Sterling Connect:Direct Secure Plus Administrative utility to provide security enhancements.  
Start Sterling Connect:Direct for i5/OS.  
STRCDMNU  
WRKCDNTMP  
Start Connect:Direct Menu.  
Select remote node records and display attributes. This screen provides the options of copy or  
change to attributes of the remote node records.  
WRKCDPROC  
WRKCDSTS  
WRKCDUSR  
WRKSPLMONE  
Monitor and control active and queued Processes.  
View and control Sterling Connect:Direct job status.  
Browse existing user records and invoke other user maintenance commands.  
View, change, or delete destination configuration file entries of the Spool Support for Sterling  
Connect:Direct for i5/OS.  
Administrative commands  
Sterling Connect:Direct Secure Plus for i5/OS commands  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Control Language  
15  
Entering CL Commands  
You can type CL commands on an i5/OS node using any of the following methods:  
Embedding CL Commands  
You can embed CL commands in an application (user-written CL program), which allows you to combine  
functions supplied by Sterling Connect:Direct for i5/OS with i5/OS CL commands within a user-written  
application.  
Entering CL Commands in Free Format  
You can type CL commands in a free format, which allows you to type a command and its parameters as a  
string of characters on a command line. This method is useful when typing familiar commands.  
Command Prompting  
Command prompting guides you through typing commands and parameters.  
Note: Sterling Connect:Direct for i5/OS commands are case sensitive if the information sent to the remote  
node is enclosed in single quotation marks.  
Monitoring CL Program Messages  
After issuing Sterling Connect:Direct for i5/OS commands such as, CDSND, CDRCV, CDRUNTASK, and  
CDRUNJOB, use the MONMSG command to monitor the following categories of error messages using a CL  
program:  
Message Category  
Message ID  
Severity  
Other  
Warning  
CDE0107  
CDE0108  
10  
30  
*ESCAPE  
*ESCAPE  
Unrecoverable error  
Unexpected error  
CDE0000  
(for example, CDE0301)  
Note: You cannot use MONMSG to monitor CDS0108 (Process execution ended) because it is not sent as  
an error message; it is an informational message.  
To capture the Sterling Connect:Direct error message after the MONMSG code, add the following after the  
MONMSG command:  
RCVMSG MSGTYPE(*LAST) WAIT(1) RMV(*NO) MSGID(&MSGID)MSGDATA(&MSGDTA) SNDMSG  
MSG(&MSGID || '' || &MSGDATA) TOUSR(*SYSOPR)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
16  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
&MSGID is the CDE* error message. The first 8 characters of the &MSGDATA are the application error  
message that you can look up interactively with the following command:  
DSPCDMSGD <msgid>  
Note: The &MSGID and &MSGDATA variables must be defined in the CL program. Specify the &MSGID  
character length as 7 characters and &MSGDATA as 8 characters to capture the error message.  
Using CL Programming and Sterling Connect:Direct CL Commands  
An i5/OS CL program includes Sterling Connect:Direct CL commands as source statements. You can  
synchronize the processing of Sterling Connect:Direct operations by including Sterling Connect:Direct CL  
commands in a CL program.  
Note: If you are using the Source Edit Utility (SEU) to edit a CL program, the prompt facility can help you  
type all CL commands, including Sterling Connect:Direct CL commands.  
Sample CL Program  
The following figure shows a sample CL program with multiple CL commands:  
PGM  
PARM(&LIBNAME &FILENAME &MBRNAME)  
DCL  
DCL  
DCL  
DCL  
VAR(&LIBNAME) TYPE(*CHAR) LEN(10)  
VAR(&FILENAME) TYPE(*CHAR) LEN(10)  
VAR(&MBRNAME) TYPE(*CHAR) LEN(10)  
VAR(&FDSN) TYPE(*CHAR) LEN(32)  
/*  
/*  
BUILD THE FDSN VARIABLE  
CHGVAR VAR(&FDSN) VALUE(&LIBNAME *TCAT '/' *CAT +  
*/  
&FILENAME *TCAT '(' *CAT &MBRNAME *TCAT +  
')')  
SEND THE FILE MEMBER */  
CDSND  
SNODE('CDSERVER.V4100') +  
SNODENVIRN(WINDOWS) FDSN(&FDSN) +  
TDSN('Send_Test.TXT') +  
FMSYSOPTS('TYPE(MBR)') +  
TOSYSOPTS('DATATYPE(TEXT)')  
MONMSG  
MSGID(CDE0000) EXEC(GOTO CMDLBL(ERROR))  
GOTO END  
SNDMSG  
ERROR:  
END:  
MSG('The process erred') TOUSR(*SYSOPR)  
ENDPGM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using Control Language  
17  
Command Prompting for the Sterling Connect:Direct CL Commands  
Sterling Connect:Direct CL commands follow the format of the native i5/OS CL commands, which provide an  
extensive help facility describing their purpose, parameters, values, and any dependencies.  
In addition, you can use the prompt/help feature to select and type commands and appropriate parameters.  
Prompt/help is offered at the command level and at the parameter level. Both levels allow you to use F4 for  
prompting and F1 for help. You can access screen level help by moving the cursor off an entry or field and  
pressing F1.  
Accessing Command Level Help  
Complete the following steps to access the Help text:  
1. For help with commands, type the command on the command line and press F1. Help text displays and  
describes the function of the command with a description of each parameter and possible values.  
2. After viewing help information, press F3 to exit the help function or F12 to cancel and return to the  
command line.  
Prompting for a Command  
Complete the following steps to prompt for a command:  
1. Type the command on the command line and press F4 to display an entry screen for the command. This  
screen lists valid parameters and provides a brief description of each parameter.  
2. Press F11 to display the keyword names.  
3. Complete the command by filling in the parameter values on the screen.  
4. After typing in all applicable parameters, press Enter to execute the command.  
Accessing Parameter Level Help  
Complete the following steps to access help with parameters:  
1. Place the cursor by the parameter for which you want further description.  
2. Press F1 to display a description of the parameter and valid values.  
3. After viewing help information, press F3 to exit the help function or F12 to cancel and return to the  
command line.  
Using Parameter Level Prompt  
Complete the following steps to prompt for a parameter:  
1. Place the cursor by the parameter for which you want to prompt.  
2. Press F4 for valid values for the parameter. At this screen, type in the appropriate value for the parameter.  
3. Press Enter to set the parameter and return to the original screen. You can also press F3 or F12 to exit the  
help function.  
If a parameter is required to run the command successfully, the field is highlighted. Prompt does not provide  
the default value. A greater than (>) symbol indicates that the parameter field contains a user-supplied value.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
18  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
Sending a File  
Sending a file on Sterling Connect:Direct for i5/OS requires the Sterling Connect:Direct Send (CDSND)  
command. Understanding the Sterling Connect:Direct for i5/OS file systems, the CDSND command  
parameters, block mode transfer, and the CDSND screens enables you to use this command more effectively.  
Using the File Systems  
Sterling Connect:Direct for i5/OS supports two types of file systems to perform file transfers: native file and  
integrated file. The native file system and the integrated file system can both be used to send files to and  
receive files from any supported file system.  
Native File System  
The native file system used in previous releases of Sterling Connect:Direct for i5/OS remains functional. This  
file system accepts the file name in the following formats:  
library-name/file-name  
specifies the library and file name to be copied.  
library-name/file-name(member-name)  
specifies the library, file, and member name of the member to be copied. You cannot use the  
EXCLUDE and SELECT parameters if you specify a member name.  
Note: *LIBL, *CURLIB and QTEMP are not valid library names for a Sterling Connect:Direct Process.  
Integrated File System  
As part of i5/OS, the integrated file system provides an integrated structure over data stored in the iSeries  
system. This file system supports stream input/output and storage management like personal computers and  
UNIX operating systems.  
Integrated File System Types  
The Sterling Connect:Direct for i5/OS integrated file system provides application and data compatibility with  
other platforms. The integrated file system consists of five file system types:  
/QLANSrv is a LAN server file system  
/QDLS is a document library file system  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                           
20  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
/QSYS.LIB is the iSeries DB2 file system  
/QOpenSys is a UNIX-style file system  
All others are part of the root file system  
Specifying a Path Name  
The integrated file system recognizes the objects by the path specification. You must specify the fully qualified  
path name to transfer a file. Sterling Connect:Direct for i5/OS identifies a path that starts with a slash (/) or a  
backslash (\) as a request for the integrated file system.  
The integrated file system does not support file field description. You cannot specify the SNDFFD(*YES)  
under this file system. Similarly, you cannot specify SELECT or EXCLUDE with the integrated file system.  
To use this system, specify the fully qualified path name in one of the following formats:  
/QSYS.LIB/library-name.LIB/file-name.FILE/member-name.MBR  
specifies the library, file name, and member name to be copied using the integrated file system.  
/directory/file-name|/QLANSrv/file-name|/QDLS/folder-name| /QOpenSys/file-name  
specifies the directory, folder, and file names to be copied using the integrated file system.  
Directories like /QOpenSys and /root are case-sensitive. The /QSYS.LIB notation is case-sensitive only if you  
enclose the name in single quotation marks.  
Controlling the Character Set  
You can control the coded character set ID used by the integrated file system. To specify a coded character set  
ID other than the job-coded or the system-coded character set, set the SYSOPTS parameter called CCSID to  
the character set you want to use, for example, CCSID(819).  
If this parameter is not set, the system default for CCSID is used.  
Using the CDSND Command  
Use the CDSND command to send a file to a remote node. This command sends files to any file systems  
supported by the i5/OS V3R1M0 or later. You can also specify a user-exit command (either EXITCMD or  
FAILCMD) to be executed after the completion of a copy process in either FROMSYSOP or TOSYSOP.  
Using EXITCMD, you can specify a command to be executed only if the copy process is successful. You can  
also specify a command to be executed only if the copy process is not successful by using the FAILCMD  
command. The EXITCMD and FAILCMD commands must be executed on an i5/OS using Sterling  
Connect:Direct version 3.3.00 and above. The FAILCMD and EXITCMD are executable iSeries commands as  
well as Sterling Connect:Direct as long as the size of the command does not exceed 127 bytes.  
CDSND Command Example  
The command shown in the following figure is an example of the CDSND command.  
CDSND  
PNAME(CDSEND) SNODE(DALLAS.OS3901)  
SNODENVIRN(OS390)  
FDSN(‘DALLIB/ACCTDATA’)  
TDSN(DALLAS.ACCTDATA)  
FMSYSOPTS(‘TYPE(FILE)’)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Sending a File  
21  
CDSND Command Format  
The following table shows the parameters for the CDSND command. Required parameters are in bold.  
Command  
Parameters  
CDSND  
SNODE(remote-node-name)  
SNODENVIRN(remote-environment-name)  
FDSN(‘from data-set-name’)  
TDSN(‘to data-set-name’)  
FMSYSOPTS(‘  
PRECMPR(*YES|*NO)  
EXITCMD(valid i5/OS command)  
FAILCMD(valid i5/OS command)  
SNDFFD(*YES|*NO)  
TEXTFILE(*YES|*NO)  
TYPE(FILE|MBR|OBJ)  
XTRAN(table-name)[XTRANLSO(so-code)|XTRANPAD(pc)|  
XTRANLSI(si-code)|XTRANLDATA(MIXED|DBCS)  
CODEPAGE(nnnnn,nnnnn)]  
CCSID(nnnnn)  
EORCHAR(xxxx)  
ALWNULL(Y)  
’)  
TOSYSOPTS(‘  
DECMPR(*YES|*NO)  
EXITCMD(valid i5/OS command)  
FAILCMD(valid i5/OS command)  
TYPE(FILE|MBR|OBJ|SPLF)  
CODEPAGE(nnnnn,nnnnn)  
CCSID(nnnnn)  
EORCHAR(xxxx)  
’)  
BLKSIZE(n|*CALC)  
CKPTINV(n)  
CLASS(n)  
COMPRESS(*NO|*YES|*EXT|X\xx\|C\cc\)  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
ECTUNING(ecclevel,ecwinsize,ecmlevel)  
EXCLUDE(generic|member-name|(start-range|stop-range)|‘list’)  
FDISP(current, normal end, abnormal end)  
NOTIFY(userid)  
PLEXCLASS(user-defined class)  
PNAME(process-name)  
PNODEID(id, pswd, newpswd)  
REPLACE(*YES|*NO)  
Sterling Connect:Direct Secure Plus parameter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
22  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Command  
Parameters  
RMTWORK(*NO|*YES)  
SACCT(accounting-data)  
SECOPTIONS(* *)  
SELECT(member,new-name,R|NR,‘list’)  
SNODEID(id, pswd, newpswd)  
TBUFND(n)  
TDBPARMS(dbid, dbsubid)  
TDCB(modeldcb, blksize, den, dsorg, keylen, limct, lrecl, optcd, recfm, rkp, trtch)  
TDISP(current, normal end, abnormal end)  
TIOEXIT(program-name)  
TIOPARM(parameter-names)  
TLABEL(seqno,labeltype,pswdread,inout,retpd|expdt)  
TLINK(vmuserid,pwd,accmode,cuu)  
TMSVGP(data-definition name)  
TPROTCT(*YES|*NO)  
TRACEOPT  
Trace Instructions:  
(L,S,F,C,X,K,D,H,V,W,P|*NONE|*ALL|*EXT|  
*COMMON|*INITPARMS|*CURRENT  
Command Trace Options:  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON| *NONE)  
TSPACE(avgblk, type, primary, secondary, pdsblk, rlse, contig, round)  
TSQL(‘sql-statement’|‘DSN=data-set-name’)  
TTYPE(entry-name)  
TUNIT(file-address)  
TVOL(private, volcount, ser)  
TVOLREF(data-set-volume)  
TVSAMCAT(dsn,vmid,pwd,accmode,cuu)  
Sterling Connect:Direct Secure Plus parameter.  
Note: The CLASS parameter is not used for Sterling Connect:Direct for i5/OS.  
Required Parameters  
Unless otherwise noted, these required parameters apply to all remote node environments.  
SNODE(remote-node-name)  
specifies a 1–16 character alphanumeric name for the receiving node (remote node). The node name  
must be defined in the network map.  
Note: The name parameter is case sensitive.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Sending a File  
23  
SNODENVIRN(remote-environment-name)  
specifies the 1–10 character alphanumeric name for the receiving node environment: OS400, OS390,  
MVS, MSP, OPENVMS, TANDEM, UNIX, VM, VOS, VSE, Microsoft Windows, or Microsoft  
Windows_NT.  
FDSN(‘from data-set-name’)  
specifies the file to be sent to the remote node. The file name can be up to 256 characters long. File  
names are verified based on the i5/OS standard file name conventions.The entire data set name must  
be in single quotes. If you are using the Sterling Connect:Direct for i5/OS F4 prompting feature, the  
system supplies the single quotes if you do not type them with the data set name on the command line.  
The length of the input field displayed is 132 characters, by default. To increase the length of the field  
to 256 characters, type an ampersand(&) followed by a blank in the first two positions of the field.  
Note: The values of *LIBL, *CURLIB, and QTEMP cannot be used when sending to or from an  
iSeries system using Sterling Connect:Direct for i5/OS. A specific library name must be used  
for copying from or to a data set on the iSeries.  
Sterling Connect:Direct for i5/OS supports two file systems: native file system and integrated file  
system. Refer to the Using the File Systems on page 19 for detailed information about the file systems.  
TDSN(’to data-set-name’)  
specifies the receiving file name on the remote node. The file name can be up to 256 characters long.  
The length of the input field displayed is 132 characters, by default. To increase the length of the field  
to 256 characters, type an ampersand(&) followed by a blank in the first two positions of the field.  
Note: Do not use member names longer than eight characters when sending to z/OS, VSE or MSP  
nodes. The results are unpredictable.  
For TDSN, the values of *LIBL,*CURLIB, QTEMP cannot be used when sending to or from  
an iSeries system using Sterling Connect:Direct for i5/OS. A specific library name must be  
used for copying from or to a data set on the iSeries.  
TDSN specifies the destination file name. File names are verified based on the i5/OS standard file  
name conventions. The entire DSN must be in single quotes. When you are using the Sterling  
Connect:Direct for i5/OS F4 prompting feature, the system supplies the single quotes if you do not  
type them with the file name on the command line.  
Sterling Connect:Direct for i5/OS supports both the native file system and the integrated file system.  
Note: If the TDSN requires a password, specify the password in the TDSN after the data set name.  
A slash (/) must follow the data set name and precede the password. This password is used  
at data set allocation. If it is not correct, the system issues a Write to Operator Request  
(WTOR) which requests the password when Sterling Connect:Direct opens the data set.  
The following table summarizes the data set name requirements for Sterling Connect:Direct  
platforms.  
SNODENVIRN  
TDSN  
Format  
Special Considerations  
OS/400  
Native File System  
Enclose in single quotation marks.  
‘library-name/file-name’  
‘library-name/file-name (member-name)’  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
24  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
SNODENVIRN  
TDSN  
Format  
Special Considerations  
Integrated File System  
‘/QSYS.LIB/library-name.LIB /file-name.FILE  
/member-name.MBR’  
You cannot specify the *SNDFFD,  
*SELECT, and *EXCLUDE parameters  
with the integrated file system.  
or  
‘/directory/file-name| /QLANSrv/file-name|  
/QDLS/folder-name| /QOpenSys/file-name’  
Spool File Support  
spooled-file-name  
Do not use member names longer than  
eight characters when sending to z/OS,  
VSE, and MSP. The results are  
unpredictable.  
OS/390, VSE,  
MSP, MVS  
Standard z/OS DSN naming conventions.  
Single quotes allow special characters. Do  
not use member names longer than eight  
characters. The results are unpredictable.  
VM  
Fully qualified file-name  
Tandem  
\system.$volume.subvolume.filename  
Microsoft  
Windows  
drive:\directory\subdirectory\filename  
or  
\\servername\sharepointname\subdirectory\fil  
ename  
UNIX  
/directory/subdirectory/filename  
OpenVMS  
node::device:[directory]filename.type;version  
When you are copying a file, the file  
specification must be enclosed in single  
quotation marks if it uses spaces or other  
special characters not recognized by the  
other node.  
Stratus VOS  
Fully qualified path and file name  
Enclose the file name in double quotation  
marks when you use a reserved word  
(statement name or keyword) for the file  
name.  
FMSYSOPTS(‘  
PRECMPR(*YES | *NO) EXITCMD(valid i5/OS command) FAILCMD(valid i5/OS command)  
SNDFFD(*YES | *NO) TEXTFILE(*YES | *NO) TYPE(FILE | MBR | OBJ)  
XTRAN(table-name) CODEPAGE(nnnnn,nnnnn)[XTRANLSO(so-code) | XTRANLSI(si-code |  
XTRANLDATA(MIXED | DBCS)|XTRANPAD(pc)] CCSID(nnnnn) EORCHAR(xxxx)  
ALWNULL(Y)’) specifies sending system operations. If you omit this parameter, Sterling  
Connect:Direct for i5/OS assumes ‘TYPE(FILE)’. The maximum number of characters for  
FMSYSOPTS is 2K.  
Note: All FMSYSOPTS keyword values must be enclosed in parentheses. The entire  
FMSYSOPTS string must be enclosed in single quotes, for example,  
FMSYSOPTS(‘TYPE(FILE) SNDFFD(*YES)’).  
PRECMPR(*YES|*NO) specifies that the file being sent has previously been compressed using the  
CDCOMP command. This option PRECMPR(*YES) cannot be specified if a secured copy function is  
being performed using Sterling Connect:Direct Secure Plus. To send a file that has been compressed,  
you must specify the PRECMPR(*YES) parameter with the CDSND command. For information  
about how to compress files, refer to Chapter 9, Compressing Files.  
Note: Ensure that the output file contains no members before you execute CDCOMP.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sending a File  
25  
EXITCMD(valid i5/OS command) specifies a command to execute only if the copy process is  
successful.  
FAILCMD(valid i5/OS command) specifies a command to be executed only if the copy process is  
not successful.  
SNDFFD(*YES|*NO) specifies whether the sending node transfers file field descriptions.  
Use the following formula to determine whether a file is sent with the file field descriptions. If the  
bytes required value is greater than 12K, you cannot transfer the file field descriptions.  
12 x number of keys) + (45 x number of fields) +SYSOPTS=bytes required  
Note: You cannot use this parameter with the integrated file system.  
TEXTFILE(*YES|*NO) specifies the file being sent is a text file. This keyword is for the i5/OS  
only.  
TYPE(FILE|MBR|OBJ) specifies the type of data to be sent. You must define the type of data to be  
copied as one of the following:  
FILE specifies that the file being copied is a physical database file.  
MBR specifies that the object being copied is a member of a physical database file.  
OBJ specifies that the data to be copied is in save file format.  
XTRAN(table-name) specifies the translation table to use. The named table object must exist in a  
library that is in the library list of the session manager job. If the library name is not in the list, the  
CDSND command fails.  
If the XTRAN keyword is present, then the following related optional keywords can also be used:  
XTRANLSO (so-code) specifies extended translation local shift-out code. This keyword  
specifies the hexadecimal code to use for the local (i5/OS side) shift-out (SO) character and  
overrides the default value of 0E. You can specify any two valid hexadecimal digits.  
XTRANLSI (si-code) specifies extended translation local shift-in code. This keyword specifies  
the hexadecimal code to use for the local (i5/OS side) shift-in (SI) character and overrides the  
default value of 0F. You can specify any two valid hexadecimal digits.  
XTRANLDATA (MIXED|DBCS) specifies extended translation local data format. This  
keyword specifies the format of the data on the local (i5/OS side) of the COPY.  
MIXED indicates that the data can contain both double-byte character set (DBCS) and  
single-byte character set (SBCS) characters and that SO/SI characters are used. MIXED is the  
default.  
XTRANPAD(pc) specifies that padding characters are in use. When DBCS data is translated  
from EBCDIC to ASCII, PAD specifies that the SHIFT-OUT and SHIFT-IN characters are  
replaced by a pad character to allow the displacement of fields within a record to remain  
unchanged during translation.  
When DBCS data is translated from ASCII to EBCDIC, PAD specifies that the input ASCII  
DBCS file is in a padded format. The character immediately preceding a DBCS character or  
string is overlaid by the SHIFT-OUT character. The character immediately following a DBCS  
character or string is overlaid with the SHIFT-IN character. This allows the displacement of fields  
within a record to remain unchanged during translation.  
pc is the pad character to be used during EBCDIC to ASCII translation. pc is ignored for  
ASCII to EBCDIC translations.  
If XTRANPAD is not used, the SI/SO characters are stripped from the file when transferring  
from EBCDIC to ASCII, and added to the records when sending from ASCII to EBCIDC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
26  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
DBCS indicates that the data is pure DBCS characters and that no SO/SI characters are used.  
The following rules apply to the use of the XTRAN keyword:  
You must specify the XTRAN keyword to use extended translation; all other keywords are  
optional.  
The default for local shift-out is the IBM standard x0E.  
The default for local shift-in is the IBM standard x0F.  
The default local data format is MIXED with SO/SI in use. XTRAN is not allowed with  
PRECMPR(*YES) or DECMPR(*NO)  
If you send a file to an ASCII platform using extended translation, you must specify in the  
TOSYSOPTS that the data type is binary. Refer to the IBM Sterling Connect:Direct Processes  
Web site at http://www.sterlingcommerce.com/documentation/processes/processhome.html for  
platform-specific SYSOPTS parameters.  
CODEPAGE(nnnnn,nnnnn) converts data from one code page to another. The supported  
conversions are identified on the IBM Web site in the V5R1 Information Center, DB2 Universal  
Database for iSeries SQL Reference, Appendix E. CODEPAGE() on Sterling Connect:Direct for  
i5/OS relates to CODEPAGE() developed for the z/OS system, UNIX, and Microsoft Windows.  
nnnnn identifies the IBM CCSID codepage number to convert from and the IBM CCSID code  
page number to convert to. If the FROM code page or TO code page is locale, the code page for  
the locale where Sterling Connect:Direct is executing is used. For example, if  
fmsysopts(codepage(locale,1208)), then the FROM code page is the code page for the locale and  
the TO code page is UTF-8.  
ALWNULL(Y) specifies if NULLS characters will be processed when sending DB2 files.  
CCSID(nnnnn) specifies the coded character set ID to use when creating IFS files. If no character set  
ID is specified, the system default is used.  
EORCHAR(xxxx) specifies the two-to four-digit hexadecimal symbol to identify the character to use  
in text files as the end-of-record character, for example, EORCHAR(0A).  
TOSYSOPTS(‘DECMPR(*YES|*NO) TYPE(FILE|MBR|OBJ|SPLF) EXITCMD(valid i5/OS Com-  
mand) FAILCMD(valid i5/OS Command) CCSID(nnnnn) EORCHAR(xxxx) ’)  
specifies system operation parameters a the receiving node. The maximum number of characters  
permitted for TOSYSOPTS is 256. The format of CODEPAGE is based on the remote operating  
system default values for CDSND.  
For additional information about valid platform-specific SYSOPTS parameters, see the appropriate  
COPY statement section of the IBM Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html.  
EXITCMD(valid i5/OSi5/OS command) specifies a command to be executed only if the copy  
process is successful.  
FAILCMD(valid i5/OS command) specifies a command to be executed only if the copy process is  
not successful.  
DECMPR(*YES|*NO) specifies whether the receiving Sterling Connect:Direct node is to  
decompress the received file. This parameter is valid only when the receiving system is a Sterling  
Connect:Direct for i5/OS node. The EXITCMD and FAILCMD are valid here if the receiving node is  
i5/OS 3.3.00 or higher. This option DECMPR(*NO) cannot be specified if a secured copy function is  
being performed using Sterling Connect:Direct Secure Plus.  
Note: Ensure that the destination file contains no members before you send a file with  
DECMPR(*NO) specified.  
*NO instructs the receiving system to place the received data in a database file without  
decompressing it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sending a File  
27  
CCSID(nnnnn) specifies the coded character set ID to use when creating IFS files. If no character set  
ID is specified, the system default is used.  
EORCHAR(xxxx) specifies the two-to four-digit hexadecimal symbol to identify the character to use  
in text files as the end-of-record character, for example, EORCHAR(0A).  
CODEPAGE(nnnnn,nnnnn) converts data from one code page to another. The supported  
conversions are identified on the IBM Web site in the V5R1 Information Center, DB2 Universal  
Database for iSeries SQL Reference, Appendix E. CODEPAGE() on Sterling Connect:Direct for  
i5/OS relates to CODEPAGE() developed for the z/OS system, UNIX, and Microsoft Windows.  
nnnnn identifies the IBM CCSID code page number to convert from and the IBM CCSID code  
page number to convert to. If the FROM code page or TO code page is locale, the code page for  
the locale where Sterling Connect:Direct is executing is used. For example, if  
tosysopt(codepage(1208,locale)), then the FROM codepage is UTF-8 code page and the TO code  
page is the local code page.  
TYPE(FILE|MBR|OBJ|SPLF) specifies the type of data to be sent. Define the type of data to be sent  
as one of the following:  
FILE specifies that the file being copied is a physical database file.  
MBR specifies that the object being copied is a member of a physical database file.  
OBJ specifies that the data to be copied is in save file format.  
SPLF specifies that the data to be copied is an i5/OS spooled output file.  
For each type of file, you can specify certain additional TOSYSOPTS parameters.  
If the receiving node is a Sterling Connect:Direct for i5/OS node, the following TOSYSOPTS  
parameters are valid for TYPE(FILE) and TYPE(MBR) files:  
RCDLEN(record-length) specifies the data length for each record in the file.  
FILETYPE(*SRC|*DATA) specifies the type of file to be created.  
TEXT(‘text description’) specifies a text description to be associated with this member (and  
file, if created). This description cannot exceed 50 characters and must be enclosed in single  
quotes.  
EXPDATE(expiration-date) specifies the date after which the new or replaced member cannot  
be used. If EXPDATE is not specified, then the file does not have an expiration date.  
MAXMBRS(number|*NOMAX) specifies the maximum number of members a physical file  
can contain.  
SIZE(#-of-recs|incr-value #-of-incrs|*NOMAX) used when a new file is created for the file  
received.  
AUT(*CHANGE|*ALL|*USE|*EXCLUDE) specifies the authority to be given to a user who  
does not have specific authority to the file or member, is not on the authorization list, and whose  
user group does not have specific authority to the file or member.  
IGCDTA(*YES|*NO) specifies that DBCS support is installed on the destination i5/OS node  
and the file being sent contains DBCS data.The following TOSYSOPTS parameters are valid for  
TYPE(OBJ) files:  
MAXRCDS(number|*NOMAX) specifies the maximum number of records the save file (which  
was created to hold the data received) can reach.  
ASP(auxiliary-storage-pool) specifies the auxiliary storage pool from which the system  
allocates storage for the save file.  
TEXT(‘text description’) specifies a text description to be associated with this object. This  
description cannot exceed 50 characters and must be enclosed in single quotes.  
AUT(*EXCLUDE|*CHANGE|*ALL|*USE) specifies the authority to give to a user who does  
not have specific authority to the object, is not on the authorization list, and whose user group  
does not have specific authority to the object.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
The following TOSYSOPTS parameters are valid for TYPE(SPLF) files:  
DEV(*JOB|*SYSVAL|device-name) specifies the name of the printer device description.  
DEVTYPE(*IPDS|*SCS)|*USERASCII specifies the type of data stream created for a printer  
file from the data received.  
PAGESIZE(page-length page-width) specifies the length and width of the page used by the  
printer. This parameter overrides the FORMTYPE parameter.  
LPI(3|4|6|7.5|8|9) specifies the line space setting (lines per inch) on the printer.  
CPI(5|10|12|13.3|15|16.7|18|20) specifies the printer character density, in characters per inch, for  
the printer.  
OVRFLW(overflow-line-number) specifies the line number on the page where overflow to a  
new page begins. The value specified must not exceed the form length specified for PAGESIZE.  
FOLD(*NO|*YES) specifies whether entire records are printed when the record length exceeds  
the form width.  
RPLUNPRT(*YES ‘replacement-character’|*NO) specifies whether unprintable characters  
are replaced with printable characters when printed. It also specifies the replacement character.  
ALIGN(*NO|*YES) specifies whether the page must be aligned in the printer before printing is  
started.  
CTLCHAR(*NONE|*FCFC) specifies whether the data contains printer control characters.  
CHLVAL(*NORMAL| (channel#1 line#1) ... (channel#12 line#12)) specifies the list of  
channel numbers with their assigned line numbers. Note that CTLCHAR(*FCFC) must be  
specified as a SYSOPTS parameter for this to be a valid parameter.  
FORMFEED(*DEVD|*CONT|*CUT|*AUTOCUT) specifies the form feed attachments used  
by the printer (4214, 5219, and 5553 printers only).  
PRTQLTY(*STD|*DRAFT|*DEVD|*NLQ) specifies the quality of print produced.  
DRAWER(1|2|3|*E1) specifies the source drawer to be used when automatic cut-sheet feed  
mode is used. FORMFEED(*AUTOCUT) must be specified as a SYSOPTS parameter for this to  
be a valid parameter.  
FONT(*CPI|*DEVD|font-identifier) specifies the font identifier to be used for the spooled  
output file.  
CHRID(*DEVD|*SYSVAL| graphic-character-set code-page) specifies the character  
identifier to be used for the spooled output file. This parameter allows you to print data with  
different character identifier coding.  
PAGRTT(*DEVD|*COR|0|90|180|270) specifies the degree of rotation (clockwise from the  
edge of the paper first loaded into the printer) of text on each page printed. 0|90|180|270 indicates  
the specific angle of rotation.  
PRTTXT(‘print-text’) specifies a line of text to be printed at the bottom of each page printed.  
Up to 30 characters enclosed in single quotes is specified.  
JUSTIFY(0|50|100) controls the print positions of the characters on the page (in the spooled file)  
so the right margin is regular.  
DUPLEX(*NO|*YES|*TUMBLE) specifies whether the spooled output file is printed on one or  
both sides of the paper.  
SPOOL(*YES|*NO) specifies whether the data is sent to a spooled file prior to printing.  
OUTQ(*JOB|*DEV|library-name/output-queue- name) specifies the output queue for the  
spooled output file created. This parameter is valid only when SPOOL(*YES).  
FORMTYPE(form-type) specifies the type of form to use in the printer when the spooled file is  
printed. A form-type identifier is user-defined and is no longer than 10 characters. The  
PAGESIZE parameter overrides this parameter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sending a File  
29  
COPIES(number-of-copies) specifies the number of copies to be printed. Valid values range  
from 1–255. This parameter is valid only when SPOOL(*YES).  
MAXRCDS(maximum-records) specifies the maximum number of records that is placed in the  
spooled file. Valid values range from 1–500000. This parameter is valid only when  
SPOOL(*YES).  
FILESEP(number-of-file-separators) specifies the number of blank separator pages to be  
placed between each copy of the file printed.  
HOLD(*YES|*NO) specifies whether the file is to be held on the output queue until released by  
the user. This parameter is valid only if SPOOL(*YES).  
SAVE(*YES|*NO) specifies whether the spooled output file is to be saved on the output queue  
once printed. This parameter is valid only if SPOOL(*YES).  
OUTPTY(*JOB|output-priority) specifies the scheduling priority of the file on the output  
queue. This parameter is valid only if SPOOL(*YES).  
USRDTA(user-data) allows up to 10 characters of data to identify the spooled output file. This  
parameter is valid only if SPOOL(*YES).  
Refer to the IBM Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html for general  
information on SMS support and TOSYSOPTS parameters for other platforms.  
Optional Parameters  
The following parameters, listed alphabetically, are optional. Unless noted, the parameters apply to all remote  
node environments.  
BLKSIZE(n|*CALC)  
specifies the blocksize value for the source file. This value must be a multiple of the file record size.  
n specifies the block size of the file. This value must be a multiple of the record size. The valid range  
is 1–32720  
*CALC indicates that the blocksize is calculated.  
CKPTINV(n)  
Number of bytes, from 1K to 2 gigabytes, to send or receive before taking a checkpoint. The format is  
nnnnnnn, nnnnnnK, or nnnnnnM, where K specifies thousands of bytes and M specifies millions of  
bytes. A value of 0 specifies no checkpoint restart Sterling Connect:Direct for i5/OS uses the value  
you specify, rounded up to the nearest record boundary, to determine when to take a checkpoint. If  
you specify a value between 1 and 1023, the value becomes 1024 or 1K.  
A checkpoint interval specified here overrides the system-wide default value in the initialization  
parameters file.  
Checkpointing cannot occur in the following cases, even if you specify a checkpoint interval:  
The file being sent is compressed during the send operation by the local node using the extended  
compression feature, and decompression is deferred on the receiving node. That is, the  
TOSYSOPTS parameter has DECMPR(*NO).  
A precompressed file is sent and decompressed by the receiving node during the send operation.  
That is, the FMSYSOPTS has PRECMPR(*YES) and TOSYSOPTS has DECMPR(*YES).  
A file is sent to a single z/OS partitioned data set member.  
If you request checkpointing when you are transferring multiple members of a file, checkpoints are  
taken only at member boundaries regardless of the interval specified in the initialization parameters or  
in the CDSND or CDRCV command.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
30  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
CLASS(n)  
determines the node-to-node session on which an operation can execute. The CLASS is a number in  
the range of 1–255. If you do not specify the CLASS parameter, it defaults to the number of maximum  
sessions defined in the mode description for the communications environment.  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
COMPRESS (*NO|*YES|*EXT|X\xx\|C\cc\)  
specifies that the data is to be compressed, which reduces the amount of data transmitted as the file is  
copied from one node to another. The file is automatically decompressed at the destination.  
Note: Compression is CPU-intensive, and its effectiveness depends on the data and line speed.  
Only use it if it benefits the installation.  
You should specify the primary compression character for text data or single-character repetitive data.  
Extended compression generally offers improved compression for all types of data.  
*NO specifies no compression.  
*YES enables compression. If *YES is specified, the default primary compression character is  
PRIMEchar=X\40\ (hex 40=“ ”).  
If you specify *YES, Sterling Connect:Direct compresses the data transmitted based on the following  
rules:  
Repetitive occurrences (ranging from 2–63) of the primary compression character are  
compressed to one byte.  
Repetitive occurrences (ranging from 3–63) of any other character are compressed to two bytes.  
*EXT specifies that extended compression is used to search for repetitive strings of characters in data  
and compress them to codes that are transmitted and converted back to the original string during  
decompression. Use this parameter when the line transmission speeds are limited, the CPU is  
available, and the data is repetitive.  
X\xx\ enables compression, where xx is the hexadecimal representation of the value to be used for the  
primary compression character.  
C\cc\ enables compression, where cc is the character representation of the value to be used for the  
primary compression character.  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
Determines whether node and Process statement overrides for Cyclic Redundancy Check (CRC) are  
allowed. If this value is set to *OFF, setting overrides for CRC checking will be ignored. The default  
value is *INITPARMS.  
*INITPARMS specifies that the CRC setting is determined by the value for the initialization  
parameter TCP.CRC.  
*NETMAP specifies that the CRC setting is determined by the value for the NETMAP parameter,  
Cyclic Redundancy Check. The value for the initialization parameter TCP.CRC must be set to *ON  
and the value for the initialization parameter TCP.CRC.OVERRIDE must be set to *YES.  
*OFF specifies that CRC is disabled.  
*ON specifies that CRC is enabled.  
ECTUNING(ecclevel,ecwinsize,ecmlevel)  
ECCLEVEL specifies the extended compression level, which affects how much CPU the extended  
compression routines use. Higher compression levels use more CPU but achieve greater compression.  
The valid values for this subparameter are 1–9, inclusive. The default value is *INITPARMS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Sending a File  
31  
ECWINSIZE specifies the extended compression window size, which is specifically for the history  
buffer that is filled from the user’s input buffer (both compressing and decompressing). The window  
specifies the amount of storage designated to maintain data previously read.  
This data can be scanned for string matches. The extended compression window size affects how  
much virtual memory the extended compression routines use. Higher window size values use more  
memory but achieve greater compression. The valid values for this subparameter are 8–15, inclusive.  
The default value is *INITPARMS.  
ECMLEVEL specifies the extended compression memory level parameter, which determines how  
much memory should be allocated for other internal data structures like the hash table and the  
previous table (pointers to previous strings starting with the same 3 characters). The extended memory  
level affects how much memory the extended compression routines use. Higher memory levels use  
more virtual memory but achieve greater compression. The valid values for this subparameter are 1–9.  
inclusive. The default value is *INITPARMS.  
EXCLUDE (generic|member-name|(start-range/stop-range)|‘list’)  
specifies criteria that identifies the file members that are not to be copied. EXCLUDE allows you to  
make exceptions to members specified generically or by range in the SELECT option.  
generic specifies a generic member name. For example, if you specify CD*, all member names  
beginning with CD are excluded.  
member-name specifies an individual member name.  
start-range/stop-range specifies first and last names in an alphanumeric range of members.  
Although member names in a range are treated as generics, they cannot be used with an asterisk (*). A  
slash (/) separates the first (start-range) and last (stop-range) member names. The two members  
specified, as well as all members in the range, are excluded.  
‘list’ specifies any combination of the subparameters.FDISP(current, normal end, abnormal end)  
specifies the status of the sending file and what is to be done with the file after notification of  
successful or unsuccessful transmission.  
current specifies the status of the file. Valid values for this subparameter are:  
SHR specifies that the member is read simultaneously by another operation. The default is SHR.  
OLD specifies that the operation is to be given exclusive control of the file.  
normal end specifies the disposition of the file following a normal operation termination, resulting in  
a zero completion code. Valid dispositions are:  
KEEP specifies that the system is to keep the member after the operation ends.  
DELETE specifies that the system is to delete the member after the operation ends.  
abnormal end specifies the disposition of the file after an abnormal operation termination, resulting  
in a nonzero completion code. Valid source file dispositions are:  
KEEP specifies that the system is to keep the member after the operation terminates abnormally.  
DELETE specifies the system is to delete the member after the operation terminates abnormally.  
Note: Currently, normal end disposition and abnormal end disposition are not applicable for  
Sterling Connect:Direct for i5/OS.  
NOTIFY(userid)  
specifies the user ID on the sending node to receive status messages that are directed to the user’s  
message queue.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
32  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
PLEXCLASS(user-defined class)  
specifies a user-defined class containing up to eight characters associated with a Sterling  
Connect:Direct/Server in a Sterling Connect:Direct/Plex environment. This represents a type of server  
on which you want to run a task, for example TAPE.  
Note: This parameter is for use only in Sterling Connect:Direct for i5/OS environments.  
PNAME(process-name)  
identifies the Process in any messages or statistics. The name is from 1 to 12 characters long. The first  
character must be alphabetic. The default name is CDSND.  
Note: Only Sterling Connect:Direct for i5/OS and Sterling Connect:Direct for UNIX support  
Process names with more than 8 characters.  
PNODEID(id, pswd, newpswd)  
specifies security user IDs and passwords at the local i5/OS node. Use this parameter only to validate  
security with a different ID than the one you used to sign on to the system.  
id specifies the security ID passed to the security system on the sending node (1–10 alphanumeric  
characters).  
pswd specifies the current security password for the specified ID. The security system on the sending  
node can use this parameter to validate the current security password (1–10 alphanumeric characters).  
This is optional unless the user has security set to require a password.  
newpswd specifies the new security password. The security system can use this parameter to change  
the current security password to the new security password (1–10 alphanumeric characters).  
Note: Although you can specify a value for newpswd, Sterling Connect:Direct for i5/OS does not  
support this parameter.  
REPLACE (*YES|*NO)  
specifies that the sending file replaces members of the same name at the receiving file or PDS.  
RMTWORK(*NO|*YES)  
specifies whether a remote process can run on the session after Sterling Connect:Direct for i5/OS has  
completed its Process on the session.  
*NO terminates the session after Sterling Connect:Direct for i5/OS executes the command function.  
*YES allows a remote process to run on the session after Sterling Connect:Direct for i5/OS completes  
its Process.  
SACCT(accounting-data)  
specifies the accounting data for the receiving node. The maximum length of the accounting data is  
256 characters. If special characters are part of the accounting data, the string must be enclosed in  
single quotation marks.  
SECOPTIONS(* *)  
Encryption and Digital Signature values.  
Encryption specifies if data encryption is to be performed and what algorithm to use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Sending a File  
33  
Digital Signature specifies if a digital signature is created while a file is being transmitted.  
Note: The SECOPTIONS parameter is valid only if the Sterling Connect:Direct Secure Plus is  
installed. For information about these parameters, refer to the IBM Sterling Connect:Direct  
Secure Plus Implementation Guide.  
SELECT(member, new-name, R/NR, ‘list’)  
specifies selection criteria by which file members are to be copied. Use this parameter when you  
specify TYPE(FILE) in the FMSYSOPTS parameter.  
Note: *FIRST is not a valid subparameter.  
The SELECT parameter consists of three positional subparameters separated by commas.  
member specifies the member(s) to be copied. You can also specify a list of individual member  
names or generic member names separated by spaces. However, you cannot use the new-name and  
replace-member (R) subparameters when specifying a list. Member selections are:  
* represents a global generic and indicates that all members of the file are to be included.  
generic specifies a generic member name. For example, if you specify CD*, all member names  
beginning with CD are selected for copying.  
member-name specifies an individual member name.  
start-range/stop-range specifies first and last names in an alphanumeric range of members.  
Although member names in a range are treated as generics, you cannot use them with an asterisk  
(*). A slash (/) separates the first (start-range) and last (stop-range) member names. The two  
members specified, as well as all members in the range, are copied.  
new-name specifies a new name for a member. The new-name subparameter cannot be used if you  
use a generic or range to select the members to be copied or if you specify a list of member names.  
R/NR specifies whether a copied member replaces an existing member of the same name in the  
receiving file. When used with a generic or a range, this subparameter applies to all members selected.  
Note: When using a generic and specifying NR or R, the second positional subparameter  
(new-name) must be null, for example, generic*,,NR.  
R specifies that a member replaces an existing member of the same name in the receiving file.  
When used with the new-name subparameter, R applies to the specified new-name and not the  
original member name.  
NR specifies that a member does not replace an existing member of the same name in the  
receiving file. NR overrides the REPLACE parameter.  
‘list’ specifies any combination of the subparameters.  
SNODEID (id, pswd, newpswd)  
specifies security user IDs and passwords at the remote node. If nothing is specified for this  
parameter, the user profile of the user who submits the command is sent to the remote node with a  
blank password.  
id specifies the security ID passed to the security system on the receiving node (1–64 alphanumeric  
characters).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
34  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
pswd specifies the current security password. The security system on the SNODE can use this  
parameter to validate the current security password (1–64 alphanumeric characters). This is optional  
unless you have security set to require a password.  
newpswd specifies the new security password and is used by the security system to change the current  
security password to the new security password (1–64 alphanumeric characters).  
Note: newpswd is not supported if the remote node is an i5/OS node.  
Parameter values are case sensitive.  
TBUFND(n)  
specifies the number of I/O buffers VSAM uses for transmitting data between virtual and auxiliary  
storage. Valid values range from 1–510. The default is 2. Increasing this number generally improves  
the I/O performance on the file but requires more memory.  
TDBPARMS (dbid, dbsubid)  
indicates that the Sterling Connect:Direct SQL SERVER is to process the I/O request against the  
database identified by the subparameters of this keyword and defined by the SQL= parameter. The  
DBPARMS parameter is used with the optional Sterling Connect:Direct for SQL feature. This  
parameter is valid for z/OS nodes only. Only DB2 is supported.  
To determine the values to code to access a given DB2 table or set of DB2 tables, consult your  
database administrator.  
dbid specifies the DB2 database ID of one to four bytes.  
dbsubid specifies the DB2 database sub-ID of one to four bytes.  
TDCB (modeldcb, blksize, den, dsorg, keylen, linct, lrecl, optcd, recfm, rkp, trtch)  
overrides attributes of the source file. For existing source and destination files, DCB attributes are  
determined from the operating system unless specified. For a new destination file, use the DCB  
attributes of the source file to allocate the destination file unless you provide DCB information in the  
operation.  
modeldcb specifies a model data set control block (DSCB).  
blksize specifies the length in bytes of the block. The minimum length is 18 bytes, and the maximum  
length is 32,760 bytes.  
den specifies the magnetic tape mode setting. The following table shows the values for the DEN  
parameter for 7- and 9-track tapes. When coded together, the DEN and TRTCH values are used to  
select a tape device for allocation by the remote node.  
DEN  
7-Track Tape  
9-Track Tape  
1
2
3
4
556 bpi  
--  
800 bpi  
800 bpi  
1600 bpi  
6250 bpi  
--  
--  
dsorg specifies the file organization. Valid file organizations are BDAM, ISAM, PO, PS, and VSAM.  
keylen specifies the length of the keys used in a file. Maximum length is 255 bytes.  
limct specifies the blocks or tracks searched to find a free block or available space.  
lrecl specifies the record length in bytes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Sending a File  
35  
optcd specifies optional processing associated with this file. This specification only applies to this file  
and is not automatically applied to the other files involved in the RECEIVE operation. Valid options  
are:  
W performs write validity checks on direct access storage devices.  
Q performs ASCII-to-EBCDIC conversion for input files and EBCDIC-to-ASCII conversion for  
output files. Q is the default and only used for AL-labeled tape files.  
Z performs reduced error recovery for tape files.  
recfm specifies the format of the records in the file. You can specify any valid record format, such as:  
F specifies fixed format.  
FA specifies fixed format with ASA printer control.  
FB specifies fixed block format.  
FBA specifies fixed block format with ANSI carriage control.  
FM specifies fixed format with machine code control character.  
U specifies undefined format.  
V specifies variable format.  
VB specifies variable block format.  
VBA specifies variable block format with ASA printer control.  
VBM specifies variable block format with machine code control character.  
VS specifies variable spanned format.  
VBS specifies variable block spanned format.  
For FDR volumes, you must specify RECFM=U.  
rkp specifies the position of the first byte of the record key within each logical record. The beginning  
byte of a record is addressed as 0.  
trtch specifies the magnetic tape mode setting. When coded together, the TRTCH and DEN values  
select a tape device for allocation by Sterling Connect:Direct for z/OS. Valid options are:  
C specifies data conversion, odd parity, and no translation.  
E specifies no data conversion, even parity, and no translation.  
T specifies no data conversion, odd parity, and BCD or EBCDIC translation.  
ET specifies no data conversion, even parity, and BCD or EBCDIC translation.  
COMP is a feature for 3480X tape drives only. It enables Improved Data Recording Capability  
(IDRC), which compresses the data. This subparameter overrides the system-wide IDRC setting  
for no compression. If you are specifying COMP, you must also include a UNIT= parameter that  
specifies either 3480X or a systems programmer-defined name equivalent to a 3480X tape drive.  
NOCOMP overrides the system-wide IDRC setting for compression. It applies to 3480X tape  
drives only.  
TDISP (current, normal end, abnormal end)  
specifies the status of the file on the receiving node.  
current specifies the status of the file before the operation executes. Valid choices for this  
subparameter are:  
NEW indicates that the current Sterling Connect:Direct operation creates the destination file or  
member.  
OLD indicates that the destination member already exists. The operation has exclusive control of  
the member. If the destination member does not exist, the operation fails.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
36  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
MOD indicates that the operation modifies the member by adding data to the end of the member  
or, if none exists, allocates a new member. The file is also created if it does not exist.  
RPL indicates that the destination file or member is replaced. The file is created if it does not  
exist.  
SHR indicates that another operation can read the file simultaneously. The file is created if it does  
not exist on i5/OS.  
Note: Normal end disposition and abnormal end disposition are not applicable when sending  
to Sterling Connect:Direct for i5/OS.  
For information on subparameters for other Sterling Connect:Direct platforms, refer to the IBM  
Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html.  
TIOEXIT(program-name)  
specifies the name of the user-written program to be given control for I/O-related requests for the  
associated data.  
TIOPARM(parameter-names)  
specifies a parameter or list of parameters to be passed to the specified exit. The TIOPARM syntax is  
dependent on the parameter list required by the program specified in TIOEXIT.  
TLABEL(seqno, labeltype, pswdread, inout, retpd, expdt)  
specifies label information for the tape.  
seqno specifies the relative file position on the tape.  
labeltype is designated as:  
SL specifies IBM standard label.  
AL specifies American National Standard label.  
BLP specifies bypass label processing.  
LTM specifies bypass leading tape marks.  
NL specifies no label.  
pswdread specifies that a password must be supplied by the operator or user before the file is  
accessed.  
inout specifies that a BSAM data set opened for INOUT or a BDAM data set opened for UPDAT is to  
be read only.  
retpd specifies the retention period for the data set in days, where nnnn is one to four digits.  
expdt specifies the expiration date for the data set, where yyddd or yyyyddd is a valid Julian date.  
TLINK(vmuserid pwd accmode cuu)  
specifies the disk where the CMS file is located. This parameter allows the user to access the CMS  
file. This parameter is for a VM remote node.  
vmuserid specifies the owner ID for the CMS minidisk where the file is located. The valid length  
ranges from 1–8 characters.  
pwd specifies the appropriate password for the CMS minidisk where the file is located. The maximum  
length is 256 characters. The default password is ALL.  
accmode specifies the link access mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Sending a File  
37  
When used with the FROM parameter, the access modes are W (primary read/write access), M  
(primary multiple access), R (primary read only), RR (primary and remote read only access), WR  
(primary read/write access; alternate read only access), MR (primary multiple access; alternate read  
only access), and MW (primary multiple access; alternate read/write only access).  
When used with the TO parameter, the access modes are W, M, and MW.  
cuu specifies the virtual address of the disk where the CMS file is located. Any three-digit number is  
valid.  
TMSVGP(data-definition-name)  
specifies the receiving file mass storage volume group that resides on a mass storage system (MSS)  
device. This must be a valid DD (data definition) name.  
TPROTCT(*YES|*NO)  
specifies whether an IBM RACF profile is created for a new file on a remote VM system.  
TRACEOPT  
Trace Instructions  
(L, S, F, C, X, K, D, H, V, W, P,|*NONE|*ALL|*EXT| *COMMON|*INITPARMS|*CURRENT  
specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The  
following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the communications logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
W enables the communications dump.  
P enables the CIPC dump.  
*NONE turns off all traces.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)  
*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).  
*COMMON enables the communications traces. (L, S, F, C, and H)  
*INITPARMS indicates the traces specified in the initialization parameters.  
*CURRENT selects the trace bits that the session manager is currently using.  
Command Trace Options  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON| *NONE)  
specifies the trace bits that define functions to be traced for this command but not for the Process it  
runs. The following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the common logic trace.  
X enables the XDR trace.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
38  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
P enables the CIPC dump.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, and P)  
*EXT enables all product traces plus two other traces. (TRCICF and TRCJOB)  
*COMMON enables the most commonly used traces. (L, S, F, C, and H)  
*NONE turns off all traces.  
TSPACE(avgblk, type, primary, secondary, pdsblk, rlse, contig, round)  
specifies the amount of storage to be allocated for new files on the destination node.  
If you specify SPACE, the DISP of the destination file must be NEW. If you do not specify SPACE  
and the DISP is NEW, space allocation defaults to the value obtained from the source file (unless a  
TTYPE has been specified). The default allocation is in blocks and, if supplied with the ROUND  
option, provides device-independent space allocation.  
This parameter is required for all new non-VSAM files unless you have specified a type key that  
includes a SPACE parameter.  
avgblk defines the average blocksize.  
type defines the space allocation. Valid options are:  
CYL specifies that space is to be allocated by cylinder.  
TRK specifies that space is to be allocated by track.  
blk specifies that space is to be allocated by the average block length of the data and is the  
default. The system computes the number of tracks to be allocated. If the subparameter ROUND  
is also specified, the system allocates the space in cylinders. ROUND is preferred because  
allocation is performed on cylinders in a device-independent manner. If no space information is  
coded, allocation is in blocks, due to device dependencies.  
primary specifies the primary allocation of storage in number of units.  
secondary specifies the secondary allocation of storage in number of units.  
pdsblk specifies the number of PDS directory blocks to be created in the file.  
rlse specifies that the unused storage allocated to the output file be released. Valid values are *YES  
and *NO.  
contig specifies that the storage for the local allocation must be contiguous. Valid values are *YES  
and *NO.  
round specifies that the storage allocated by average block length is rounded to an integral number of  
cylinders. Valid values are *YES and *NO.  
TSQL (‘sql-statement’|‘DSN=data-set-name’)  
defines the SQL statement to be processed against the database identified by the DBPARMS  
parameter or the DSN containing the SQL statements. The SQL parameter is used with the optional  
Sterling Connect:Direct for z/OS SQL feature. This parameter is valid for Sterling Connect:Direct for  
z/OS nodes only.  
‘sql-statement’ defines the actual SQL statement to be processed.  
‘DSN=data-set-name’ specifies the data set containing the SQL statement(s) to be processed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sending a File  
39  
TTYPE(entry-name)  
specifies the entry name of the type defaults file on the remote node that contains the default file  
attributes used to allocate the destination file.  
TUNIT(file-address)  
specifies the unit address, device type, or user-assigned group name where the file resides or will  
reside. For SAM-to-SAM copies where the destination file is new and the UNIT parameter is not  
coded, the device type from the source file is used. For VSE nodes, you must specify either this  
parameter or TVOL.  
Specify a unit-count to allow additional units to be allocated if required, or specify P to allocate the  
same number of units as volumes and then parallel mount the volumes.  
TVOL(private, volcount, ser)  
specifies the volume serial number or numbers containing the file and optional processing associated  
with the file. If TVOL is not specified, the file must be cataloged. For VSE nodes, you must specify  
either this parameter or TUNIT.  
private specifies allocation of an output file only if the volume is specifically requested and is used  
for direct access storage devices only. Valid values are *YES and *NO.  
volcount specifies the maximum number of volumes required by an output file.  
ser identifies by serial number the volumes on which the output file resides or will reside.  
TVOLREF(data-set-volume)  
allows you to place a data set on the same volume as the referenced data set. It must be cataloged on  
the system where it is referenced.  
TVSAMCAT = (dsn, vmid, pwd, accmode, cuu)  
specifies the catalog for the VSAM file to be copied. This parameter is required only if using a catalog  
other than the master catalog. This parameter is for a VSE or VM remote node.  
dsn specifies the filename of the VSAM catalog containing the file to be copied. The maximum length  
is 44 characters.  
vmid specifies the owner ID for the VSAM minidisk where the file is located. The maximum length is  
eight characters.  
pwd specifies the appropriate password for the VSAM minidisk where the file is located. The  
maximum length is eight characters.  
accmode specifies the link access mode. Valid access modes are NULL, W (primary read/write  
access), M (primary multiple access), and MW (primary multiple access; alternate read/write only  
access).  
cuu specifies the virtual address of the disk where the VSAM file is located. Any three-digit number  
is valid.  
Using Block Mode Transfer  
Sterling Connect:Direct for i5/OS supports block mode transfer for send operations. In this mode, Sterling  
Connect:Direct uses the file block as the data unit. Using the block mode transfer improves performance  
because the sending and receiving nodes handle fewer data units. This type of transfer reduces instruction path  
length and decreases execution time. Larger units move between Sterling Connect:Direct and the file access  
routines, requiring fewer calls to the access routines and further improving performance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
40  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Sterling Connect:Direct for i5/OS simulates block reads and writes. Using logical blocks instead of physical  
blocks, it allows you to modify the blocksize to match the other node in some cases.  
Sterling Connect:Direct for i5/OS supports block mode transfer when the following conditions exist:  
Remote node supports block mode  
Source and destination files have like characteristics  
Files are supported file types  
Sterling Connect:Direct for i5/OS supports block mode transfers for the following i5/OS file types:  
DB2 for i5/OS files (without staged compression)  
Spool files  
Save files  
Stream files (using the integrated file system)  
Simulating Blocksizes  
The simulated blocksize determines whether a block mode transfer occurs. If the block mode transfer does  
occur, the simulated blocksize is used for the transfer. The following rules determine what simulated blocksize  
Sterling Connect:Direct for i5/OS uses.  
As the receiving node, Sterling Connect:Direct for i5/OS determines the simulated blocksize by these  
conditions in order of precedence:  
Destination file blocksize specified on the request  
Source file blocksize sent by the sending node in the COPY control block  
If neither condition exists, Sterling Connect:Direct uses the record mode.  
As the sending node, Sterling Connect:Direct for i5/OS determines the simulated blocksize by these conditions  
in order of precedence:  
Source file blocksize specified on the request  
Destination file blocksize specified on the request  
Calculated value*  
*Largest multiple of record size less than some arbitrary value, such as 4096.  
Block Mode Transfer Examples  
The following block mode transfer examples include both sending and receiving examples.  
CDRCV Example—Not Specifying Source File Blocksize  
In the first example, the request does not specify the source file blocksize. In this scenario, the following  
occurs:  
The Sterling Connect:Direct for i5/OS node sets the source file simulated blocksize to 3200 by using the  
destination file value.  
The receiving Sterling Connect:Direct for i5/OS sets the destination file simulated blocksize to the value  
specified on the request.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Sending a File  
41  
Because the blocksizes match, the block mode copy occurs.  
C:D i5:  
receiving  
request:  
source blksize=not specified; dest blksize = 3200  
srce file:  
dest file:  
lrecl=80, (on another C:D i5 3.3 node)  
NEW  
CDRCV Example—Specifying Source File Blocksize  
In the second example, the following occurs:  
Sterling Connect:Direct for i5/OS calculates the simulated blocksize at 3200 because the destination file is  
new and the source file specifies a blocksize.  
The receiving node uses the existing destination file blocksize of 3200.  
A block mode transfer occurs because the blocksizes match.  
C:D i5: receiving  
request: source blksize=not specified;dest blksize = not specified;  
srce file: lrecl=80, blksize=3200 (on z/OS node)  
dest file: NEW  
CDSND Examples—Simulating Blocksize  
In the third example, the following events occur:  
Sterling Connect:Direct for i5/OS sets the simulated blocksize at 6400 from the request.  
The receiving node creates the destination file using source file attributes of blksize=6400.  
Because the file attributes match, the block mode transfer occurs.  
C:D i5:  
sending  
request:  
source blksize=6400; dest blksize = not specified;  
srce file:  
dest file:  
lrecl=80  
NEW (on z/OS)  
CDSND Examples—Setting Actual Blocksize  
In the fourth example, the following events occur:  
The remote node sets the destination file blocksize to 3200, the actual blocksize of the destination file.  
Sterling Connect:Direct for i5/OS calculates the simulated blocksize at 3200.  
The blocksizes are identical, so block mode transfer occurs.  
C:D i5: sending  
request: source blksize=not specified; dest blksize = not specified;  
srce file: lrecl=80  
dest file: existing: lrecl=80, blksize=3200 (on z/OS)  
CDSND and CDRCV Example  
In the fifth example, Sterling Connect:Direct for i5/OS calculates the simulated blocksize at 32720 because the  
copy is between two Sterling Connect:Direct for i5/OS nodes.  
C:D i5 sending and receiving  
request: source blksize=not specified; dest blksize=not specified  
srce file: lrecl=32720  
dest file: new  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
42  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Using the CDSND Screens  
Use the Connect:Direct Send File (CDSND) screens to send a file to a remote node.  
Sending a File to a Remote Node  
Complete the following steps to send a file to a remote node.  
1. Access the CDSND screens by typing CDSND at the command line and pressing F4 or by choosing the  
send file option from the Sterling Connect:Direct menu.  
2. Type in the remote node name at the screen prompt and press Enter. The command retrieves the remote  
node environment and displays fields for required parameters.  
3. Type values for required and optional parameters as appropriate and press Enter.  
Following is a sample of the first screen in the Connect:Direct Send File (CDSND) screen flow. The sample  
shows the keyword display option.  
Connect:Direct Send File Screen 1  
Connect:Direct Send File (CDSND)  
Type choices, press Enter.  
Receiving Node Name . . . . . . > DALLAS___________  
Receiving Node Environment . . .  
OS400_______ AS400, MSP, MVS, OS400...  
Sending File Name . . . . . . . __________________________________________________  
___________________________________  
Receiving File Name . . . . . . __________________________________________________  
___________________________________  
Sending System Operations . . .  
'TYPE(FILE)'____________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
___________________________________________________________________________________  
____________________________________________________________________...  
Bottom  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F13=How to use this display  
F24=More keys  
The content of this screen and the following screens depends on the receiving node environment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Sending a File  
43  
Connect:Direct Send File Screen 2  
Connect:Direct Send File (CDSND)  
Type choices, press Enter.  
Receiving System Operations . . ‘TYPE(FILE)’______________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
__________________________________________________________________ ...  
Trace Options:  
Trace Instructions . . . . . .  
Command trace options . . . .  
Process Name . . . . . . . . . .  
Sending Node User Info.:  
*CURRENT__________________________  
*NONE_____________________________  
CDSND___  
Name  
User Id . . . . . . . . . . .  
Password . . . . . . . . . . .  
New Password . . . . . . . . .  
User to Notify . . . . . . . . .  
*CURRENT  
Character value, *CURRENT  
Character value  
Character value  
*CURRENT  
Name, *CURRENT, *NONE  
More...  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
Connect:Direct Send File Screen 3  
Connect:Direct Send File (CDSND)  
Type choices, press Enter.  
Receiving Node User Info.:  
User Id . . . . . . . . . . .____________________________________________________  
_________________________________  
Password . . . . . . . . . . .  
New Password . . . . . . . . .  
Class . . . . . . . . . . . . .  
Checkpoint Interval . . . . . .  
Allow remote process . . . . . .  
Sending File Disposition:  
*MODED  
*INITPARMS  
*NO  
1-255, *MODED  
0-9999999, *INITPARMS  
Character value, *YES, *NO  
Current Disposition . . . . .  
Normal End Disposition . . . .  
Abnormal End Disposition . . .  
SHR  
SHR, OLD  
KEEP, DELETE  
KEEP, DELETE  
More...  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
44  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Connect:Direct Send File Screen 4  
Connect:Direct Send File (CDSND)  
Type choices, press Enter.  
File Members Selection List . . __________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________  
File Members Exclusion List . .__________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________  
Sending block size . . . . . . .  
Same Member Replaced . . . . . .  
CRC . . . . . . . . . . . . . .  
Secure+ Options:  
*CALC  
*YES  
*INITPARMS  
Character value, *CALC  
*YES, *NO  
*INITPARMS, *NETMAP, *ON, *OFF  
Encryption . . . . . . . . . .  
Digital Signature . . . . . .  
Compress Data . . . . . . . . .  
*
*
*NO  
*/Y/N/Algorithm  
*, N, Y  
Character value, *NO, *YES...  
More...  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F13=How to use this display  
F24=More keys  
Connect:Direct Send File Screen 5  
Connect:Direct Send File (CDSND)  
Type choices, press Enter.  
Extended compression tuning:  
Extended compression level . .  
Extended compression window .  
Extended compression memory .  
Receiving File Type Parameter .  
Receiving File Disposition:  
Current Disposition . . . . .  
Normal End Disposition . . . .  
Abnormal End Disposition . . .  
Receiving Unit:  
*INITPARMS  
*INITPARMS  
*INITPARMS  
1-9, *INITPARMS  
8-15, *INITPARMS  
1-9, *INITPARMS  
Character value  
NEW  
CATLG  
NEW, OLD, MOD, RPL, SHR  
CATLG, KEEP  
KEEP, CATLG, DELETE  
Address/Type/Group/Unit-ID . .  
Receiving Unit Count/P . . . .  
________  
___  
Character value  
Character value, P  
More...  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 4  
Receiving a File  
Receiving a file on Sterling Connect:Direct for i5/OS requires the Sterling Connect:Direct Receive (CDRCV)  
command. Understanding the Sterling Connect:Direct for i5/OS file systems, the CDRCV command  
parameters, and the CDRCV screens enables you to use this command more effectively. This chapter provides  
the following information to help you use this command:  
Using the file systems  
Using the CDRCV command  
Using block mode transfer  
Using CDRCV screens  
Additional information about the use of command parameters for receiving remote files is available on the  
IBM Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html.  
Using the File Systems  
Sterling Connect:Direct for i5/OS supports two types of file systems for the file transfers: native file and  
integrated file. The native file system and the integrated file system can both be used to send files to and  
receive files from any supported file systems.  
Native File System  
The native file system used in previous releases of Sterling Connect:Direct for i5/OS remains functional. This  
file system accepts the file name in the following formats:  
library-name/file-name  
specifies the library and file name to be copied.  
library-name/file-name(member-name)  
specifies the library, file, and member name of the member to be copied. You cannot use the  
EXCLUDE and SELECT parameters if you specify a member name.  
Integrated File System  
As part of the i5/OS, the integrated file system provides an integrated structure over all data stored in the  
iSeries. This file system supports stream input/output and storage management like personal computers and  
UNIX operating systems.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
46  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
The Sterling Connect:Direct for i5/OS integrated file system provides application and data compatibility with  
other platforms. The integrated file system consists of five file system types:  
/QLANSrv is a LAN server file system  
/QDLS is a document library file system  
/QSYS.LIB is the iSeries DB2 file system  
/QOpenSys is a UNIX-style file system  
All others are part of the root file system  
Specifying a Path Name  
The integrated file system recognizes the objects by the path specification. You must specify the fully qualified  
path name to transfer a file. Sterling Connect:Direct for i5/OS identifies a path that starts with a slash (/) or a  
backslash (\) as a request for the integrated file system.  
The integrated file system does not support file field description. You cannot specify the SNDFFD(*YES)  
under this file system. Similarly, you cannot specify SELECT or EXCLUDE with the integrated file system.  
To use this system, you must specify the fully qualified path name in one of the following formats:  
/QSYS.LIB/library-name.LIB/file-name.FILE/member-name.MBR  
specifies the library, file name, and member name to be copied using the integrated file system.  
/directory/file-name|/QLANSrv/file-name|/QDLS/folder-name| /QOpenSys/file-name  
specifies the directory, folder, and file names to be copied using the integrated file system.  
Directories like /QOpenSys and /root are case-sensitive. The /QSYS.LIB notation is case-sensitive only if you  
enclose the name in single quotation marks.  
Using the CDRCV Command  
Use the CDRCV command to receive a file from a remote node. This command receives files from any file  
systems supported by the i5/OS V3R1M0 or later. You can also specify a user-exit command (either  
EXITCMD or FAILCMD) to be executed after the completion of a copy process in either FROMSYSOPTS  
or TOSYSOPTS. Using EXITCMD, you can specify a command to be executed only if the copy process is  
successful. You can also specify a command to be executed only if the copy process is not successful by using  
the FAILCMD command. The EXITCMD and FAILCMD commands must be executed on an i5/OS using  
Sterling Connect:Direct release 3.3.00 and above. The EXITCMD and FAILCMD are executable iSeries  
commands as well as Sterling Connect:Direct as long as the size of the command does not exceed 127 bytes.  
CDRCV Command Example  
The command shown in the following figure is an example of the CDRCV command.  
CDRCV  
PNAME(CDRCVD) SNODE(DALLAS.OS3901)  
SNODENVIRN(OS390)  
FDSN(DALLAS.REPORT)  
TDSN(‘DALLIB/REPORT’)  
TOSYSOPTS(‘TYPE(FILE)’)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Receiving a File  
47  
CDRCV Command Format  
Following are the parameters for the CDRCV command. Required parameters are in bold.  
Command  
Parameter  
CDRCV  
SNODE(remote-node-name)  
SNODENVIRN(remote-environment-name)  
FDSN(from remote-data-set-name)  
TDSN(to data-set-name)  
FMSYSOPTS(‘  
PRECMPR(*YES|*NO)  
CODEPAGE(nnnnn,nnnnn)  
EXITCMD(valid i5/OS command)  
FAILCMD(valid i5/OS command)  
SNDFFD(*YES|*NO)  
TEXTFILE(*YES|*NO)  
TYPE(FILE|MBR|OBJ)  
CCSID(nnnnn)  
EORCHAR(xxxx)  
ALWNULL(Y)  
’)  
Note: FMSYSOPTS is required if sending node is i5/OS)  
TOSYSOPTS(’  
DECMPR(*YES|*NO)  
CODEPAGE(nnnnn,nnnnn)  
EXITCMD(valid i5/OS command)  
FAILCMD(valid i5/OS command)  
TYPE(FILE|MBR|OBJ|SPLF)  
XTRAN(table-name)[XTRANLSO(so-code)|  
XTRANLSI(si-code)|XTRANLDATA(MIXED|DBCS)]  
CCSID(nnnnn)  
EORCHAR(xxxx)  
’)  
CKPTINV(n)  
CLASS(n)  
COMPRESS(*NO|*YES|*EXT|X\xx\|C\cc\)  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
ECTUNING (ecclevel, ecwinsize, ecmlevel)  
EXCLUDE(generic, member-name, (start-range/stop-range), ‘list’)  
FALIAS(*YES|*NO)  
FBUFND(n)  
FDBPARMS(dbid, dbsubid)  
FDCB(modeldcb, blksize, den, dsorg, keylen, linct, lrecl, optcd, recfm, rkp, trtch)  
FDISP(current, normal end, abnormal end)  
FIOEXIT(program-name)  
FIOPARM(parameter-name)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
48  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Command  
Parameter  
FLABEL(seqno,labeltype,pswdread,inout,retpd|expdt)  
FLINK(vmuserid,pwd,accmode,ccuu)  
FMSVGP(data-set-name)  
FPDSDIR(*YES|*NO)  
FSQL(sql-statement|DSN=data-set-name)  
FTYPE(entry-name)  
FUNIT(unit-name)  
FVOL(private, volcount, ser)  
FVOLREF(data-set-name)  
FVSAMCAT(dsn,vmid,pwd,accmode,cuu)  
NOTIFY(userid)  
PLEXCLASS(user-defined class)  
PNAME(process-name)  
PNODEID(id, pswd, newpswd)  
REPLACE(*YES|*NO)  
RMTWORK(*YES|*NO)  
SACCT(snode-accounting-data)  
SECOPTIONS(* *)  
SELECT(member, new-name, R/NR, ‘list’)  
SNODEID(id, pswd, newpswd)  
TDISP(current)  
TRACEOPT  
Trace Instructions:  
(L,S,F,C,X,K,D,H,V,W,P|*NONE|*ALL|*EXT|  
*COMMON|*INITPARMS|*CURRENT  
Command Trace Options:  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON|  
*NONE)  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
Required Parameters  
Unless otherwise noted, these required parameters apply to all remote node environments.  
SNODE(remote-node-name)  
specifies a 1–16 character alphanumeric name for the remote node. The node name must be defined in  
the network map.  
SNODENVIRN(remote-environment-name)  
specifies the remote node environment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Receiving a File  
49  
FDSN(‘from remote-data-set-name’)  
specifies the source file name. File names are verified based on the i5/OS standard file name  
conventions. The length of the input field displayed is 132 characters, by default. If you want to  
increase the length of the field to 256 characters, type an ampersand(&) followed by a blank in the  
first two positions of the field.  
Sterling Connect:Direct for i5/OS provides two systems for handling the files: Native File System and  
Integrated File System. The following table summarizes the data set name requirements for Sterling  
Connect:Direct platforms.  
SNODENVIRN  
FDSN Format  
Special Considerations  
OS/400  
Native File System  
‘library-name/file-name’ ‘library-name/file-name  
(member-name)’  
Enclose in single quotation  
marks.  
Integrated File System  
You cannot specify the  
‘/QSYS.LIB/library-name.LIB /file-name.FILE  
*SNDFFD, *SELECT, and  
*EXCLUDE parameters with the  
integrated file system.  
/member-name.MBR’  
or  
‘/directory/file-name| /QLANSrv/file-name|  
/QDLS/folder-name| /QOpenSys/file-name’  
Spool File Support  
spooled-file-name  
Do not use member names  
longer than eight characters  
when sending to z/OS, VSE,  
and MSP. The results are  
unpredictable.  
OS/390, VSE, MSP  
Standard z/OS DSN naming conventions.  
Single quotes allow special  
characters. Do not use member  
names longer than eight  
characters. The results are  
unpredictable.  
VM  
Fully qualified file-name  
Tandem  
\system.$volume.subvolume.filename  
Microsoft Windows  
drive:\directory\subdirectory\filename  
or  
\\servername\sharepointname\subdirectory\filename  
UNIX  
/directory/subdirectory/filename  
OpenVMS  
node::device:[directory]filename.type;version  
When you are copying a file ,  
the file specification must be  
enclosed in single quotation  
marks if it uses spaces or other  
special characters not  
recognized by the other node.  
Stratus VOS  
Fully qualified path and file name  
Enclose the file name in double  
quotation marks when you use  
a reserved word (statement  
name or keyword) for the file  
name.  
Note: The values of *LIBL, *CURLIB, and QTEMP cannot be used when sending to or from an  
iSeries system using Sterling Connect:Direct for i5/OS. A specific library name must be used  
for copying from or to a data set on the iSeries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
50  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
TDSN(‘to data-set-name’)  
specifies the local file name. File names are verified based on the i5/OS standard file name  
conventions.  
The length of the input field displayed is 132 characters, by default. If you want to increase the length  
of the field to 256 characters, type an ampersand(&) followed by a blank in the first two positions of  
the field.  
Sterling Connect:Direct for i5/OS supports two file systems: native and integrated. The file system  
description begins on page 4-45. The DSN format summaries for i5/OS are presented with the FDSN  
parameter description on page 4-49.  
Note: The values of *LIBL, *CURLIB, and QTEMP cannot be used when sending to or from an  
iSeries system using Sterling Connect:Direct for i5/OS. A specific library name must be used  
for copying from or to a data set on the iSeries.  
FMSYSOPTS(‘  
PRECMPR(*YES|*NO)  
EXITCMD(valid i5/OS command)  
FAILCMD(valid i5/OS command)  
SNDFFD(*YES|*NO)  
TEXTFILE(*YES|*NO)  
TYPE(FILE|MBR|OBJ)  
CODEPAGE(nnnnn,nnnnn)  
CCSID(nnnnn)  
EORCHAR(xxxx)  
ALWNULL(Y)  
’)  
specifies remote system operations. All parameters shown are valid only if the sending node is i5/OS.  
The maximum number of characters for SYSOPTS is 2K. This parameter is required when the remote  
file is on another Sterling Connect:Direct for i5/OS node.  
For additional information about valid platform-specific SYSOPTS parameters, see the appropriate  
COPY statement section of the IBM Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html.  
PRECMPR(*YES|*NO) specifies that the source file was previously compressed using the  
CDCOMP command. To receive a file that has been compressed, you must specify the  
PRECMPR(*YES) parameter with the CDRCV command. For information on how to compress files,  
refer to Chapter 9, Compressing Files. This is for i5/OS only.  
EXITCMD(valid i5/OS command) specifies a command to be executed only if the copy process is  
successful.  
FAILCMD(valid i5/OS command) specifies a command to be executed only if the copy process is  
not successful.  
SNDFFD(*YES|*NO) specifies whether the receiving node transfers file field descriptions. This is  
for i5/OS only.  
Use the following formula to determine whether a file can be sent with the file field descriptions. If  
the bytes required value is greater than 12K, you cannot transfer the file field descriptions.  
(12 x number of keys)+(45 x number of fields)+SYSOPTS=bytes required  
Note: You cannot use this parameter with the integrated file system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Receiving a File  
51  
TEXTFILE(*YES|*NO) specifies that the file being sent is a text file.  
TYPE(FILE|MBR|OBJ|SPLF) specifies the type of data to be copied. You must define the type of  
data structure to be copied as one of the following:  
FILE specifies that the file being copied is a physical database file.  
MBR specifies that the member being copied is a member of a physical database file.  
OBJ specifies that the data to be copied is in save file format.  
SPLF specifies that the data to be copied is in i5/OS spooled output format.  
CODEPAGE(nnnnn,nnnnn) converts data from one code page to another. The supported  
conversions are identified on the IBM Web site in the V5R1 Information Center, DB2 Universal  
Database for iSeries SQL Reference, Appendix E. CODEPAGE() on Sterling Connect:Direct for  
i5/OS relates to CODEPAGE() developed for the z/OS system, UNIX, and Microsoft Windows.  
nnnnn identifies the IBM CCSID code page number to convert from and the IBM CCSID code  
page number to convert to. If the FROM code page or TO code page is locale, the code page for  
the locale where Sterling Connect:Direct is executing is used. For example, if  
fmsysopts(codepage(locale,1208)), then the FROM code page is the code page for the locale and  
the TO code page is UTF-8.  
CCSID(nnnnn) specifies the coded character set ID to use when creating IFS files. If no character set  
ID is specified, the system default is used.  
EORCHAR(xxxx) specifies the two-to four-digit hexadecimal symbol to identify the character to use  
in text files as the end-of-record character, for example, EORCHAR(0A).  
ALWNULL(Y) specifies if NULLS characters will be processed when sending DB2 files.  
TOSYSOPTS(‘  
DECMPR(*YES|*NO)  
EXITCMD(valid i5/OS command)  
FAILCMD(valid i5/OS command)  
TYPE(FILE|MBR|OBJ|SPLF)  
XTRAN(table-name) [XTRANLSO(so-code)|  
XTRANLSI(si-code)|XTRANLDATA(MIXED|DBCS)]  
CCSID(nnnnn)  
EORCHAR(xxxx)  
’)  
specifies system operation parameters at the local node (i5/OS). The maximum number of characters  
permitted for TOSYSOPTS is 2K.  
DECMPR(*YES|*NO) specifies whether the local Sterling Connect:Direct is to decompress the  
received file. DECMPR(*NO) instructs the local system to place the received data in a database file  
without decompressing it.  
Note: Ensure that the destination file contains no members before you receive a file with  
DECMPR(*NO) specified.  
EXITCMD(valid i5/OS command) specifies a command to be executed only if the copy process is  
successful.  
FAILCMD(valid i5/OS command) specifies a command to be executed only if the copy process is  
not successful.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
52  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
TYPE(FILE|MBR|OBJ|SPLF) specifies the type of data structure to be created. You must define the  
data structure to be created as one of the following:  
FILE specifies that the file being created is a physical database file.  
MBR specifies that the member being created is a member of a physical database file.  
OBJ specifies that the file being created is in save file format.  
SPLF specifies that the data is copied to an i5/OS spooled output file.  
The default is TYPE(FILE).  
For each type, you can specify certain additional TOSYSOPTS parameters.  
The following subparameters are valid for TYPE(FILE) and TYPE(MBR) files:  
RCDLEN(record-length) specifies the data length for each record in the file.  
FILETYPE(*SRC|*DATA) specifies the type of file to be created. Use this parameter whenever  
a file is created.  
TEXT(‘text description’) specifies a text description to be associated with this member (and  
file, if created). This description cannot exceed 50 characters and must be enclosed in single  
quotes.  
EXPDATE(expiration-date) specifies the date after which the new or replaced member cannot  
be used. If EXPDATE is not specified, then the file does not have an expiration date.  
MAXMBRS(number|*NOMAX) specifies the maximum number of members a physical file  
can contain.  
SIZE(#-of-recs|incr-value #-of-incrs|*NOMAX) is used when a new file is created for the file  
received.  
AUT(*CHANGE|*ALL|*USE|*EXCLUDE) specifies the authority to be given to a user who  
does not have specific authority to the file or member, is not on the authorization list, and whose  
user group does not have specific authority to the file or member.  
The following parameters are valid for TYPE(OBJ) files:  
MAXRCDS(number-of-records|*NOMAX) specifies the maximum number of records the save  
file (which was created to hold the data received) can reach.  
ASP(auxiliary-storage-pool) specifies the auxiliary storage pool from which the system  
allocates storage for the save file. Valid values range from 1–16. The default is 1.  
TEXT(‘text description’) specifies a text description to be associated with this object. This  
description cannot exceed 50 characters and must be enclosed in single quotes.  
AUT(*EXCLUDE|*CHANGE|*ALL|*USE) specifies the authority to be given to a user who  
does not have specific authority to the object, is not on the authorization list, and whose user  
group does not have specific authority to the object.  
CODEPAGE(nnnnn,nnnnn) converts data from one code page to another. The supported  
conversions are identified on the IBM Web site in the V5R1 Information Center, DB2 Universal  
Database for iSeries SQL Reference, Appendix E. CODEPAGE() on Sterling Connect:Direct for  
i5/OS relates to CODEPAGE() developed for the z/OS system, UNIX, and Microsoft Windows.  
nnnnn identifies the IBM CCSID codepage number to convert from and the IBM CCSID code  
page number to convert to. If the FROM code page or TO code page is locale, the code page for  
the locale where Sterling Connect:Direct is executing is used. For example, if  
tosysopt(codepage(1208,locale)), then the FROM code page is UTF-8 code page and the TO code  
page is the local code page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiving a File  
53  
The following TOSYSOPTS parameters are valid for TYPE(SPLF) files:  
DEV(*JOB|*SYSVAL|device-name) specifies the name of the printer device description.  
DEVTYPE(*IPDS|*SCS|*USERASCII) specifies the type of data stream created for a printer  
file from the data received.  
PAGESIZE(page-length page-width) specifies the length and width of the page used by the  
printer. This parameter overrides the FORMTYPE parameter.  
LPI(3|4|6|7.5|8|9) specifies the line space setting (lines per inch) on the printer.  
CPI(5|10|12|13.3|15|16.7|18|20) specifies the printer character density, in characters per inch, for  
the printer.  
OVRFLW(overflow-line-number) specifies the line number on the page at which overflow to a  
new page begins. The value specified must not exceed the forms length specified for PAGESIZE.  
FOLD(*NO|*YES) specifies whether entire records are printed when the record length exceeds  
the form width.  
RPLUNPRT(*YES ‘replacement-character’|*NO) specifies whether unprintable characters  
are replaced with printable characters when printed. It also specifies the replacement character.  
ALIGN(*NO|*YES) specifies whether the page must be aligned in the printer before printing is  
started.  
CTLCHAR(*NONE|*FCFC) specifies whether the data contains printer control characters.  
CHLVAL(*NORMAL| (channel#1 line#1).. . (channel#12 line#12)) specifies the list of  
channel numbers with their assigned line numbers.  
FORMFEED(*DEVD|*CONT|*CUT|*AUTOCUT) specifies the form feed attachments that  
the printer uses (4214, 5219, and 5553 printers only).  
PRTQLTY(*STD|*DRAFT|*DEVD|*NLQ) specifies the quality of print produced.  
DRAWER(1|2|3|*E1) specifies the source drawer to be used when automatic cut-sheet feed  
mode is used.  
FONT(*CPI|*DEVD|font-identifier) specifies the font identifier to be used for the spooled  
output file.  
CHRID(*DEVD|*SYSVAL| graphic-character-set code-page) specifies the character  
identifier to use for the spooled output file. *DEVD indicates that the CHRID value the device is  
designed to handle is used.  
PAGRTT(*DEVD|*COR|0|90|180|270) specifies the degree of rotation (clockwise from the  
edge of the paper first loaded into the printer) of text on each page printed.  
PRTTXT(‘print-text’) specifies a line of text to be printed at the bottom of each page printed.  
Up to 30 characters enclosed in single quotes can be specified.  
JUSTIFY(0|50|100) controls the print positions of the characters on the page (in the spooled file)  
so the right margin is regular.  
DUPLEX(*NO|*YES|*TUMBLE) specifies whether the spooled output file is printed on one or  
both sides of the paper.  
SPOOL(*YES|*NO) specifies whether the data is sent to a spooled file before printing.  
OUTQ(*JOB|*DEV|library-name/output-queue- name) specifies the output queue for the  
spooled output file created.  
FORMTYPE(form-type) specifies the type of form to use in the printer when the spooled file is  
printed. The PAGESIZE parameter overrides this parameter.  
COPIES(number-of-copies) specifies the number of copies to be printed. Valid values range  
from 1–255.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
MAXRCDS(maximum-records) specifies the maximum number of records that can be placed  
in the spooled file. Valid values range from 1–500000.  
FILESEP(number-of-file-separators) specifies the number of blank separator pages to be  
placed between each copy of the file printed.  
HOLD(*YES|*NO) specifies whether the file is to be held on the output queue until released by  
the user.  
SAVE(*YES|*NO) specifies whether the spooled output file is to be saved on the output queue  
once printed.  
OUTPTY(*JOB|output-priority) specifies the scheduling priority of the file on the output  
queue.  
USRDTA(user-data) allows up to 10 characters of data to identify the spooled output file.  
XTRAN(table-name) specifies the translation table to use. The named table object must exist in a  
library that is in the library list of the session manager job. If the library name is not in the list, the  
CDRCV command fails.  
If the XTRAN keyword is present, then the following related optional keywords can also be used:  
XTRANLSO (so-code) specifies extended translate local shift-out code. This keyword specifies  
the hexadecimal code to use for the local (i5/OS side) shift-out character and overrides the default  
value of 0E. You can specify any two valid hexadecimal digits.  
XTRANLSI (si-code) specifies extended translate local shift-in code. This keyword specifies the  
hexadecimal code to use for the local (i5/OS side) shift-in character and overrides the default  
value of 0F. You can specify any two valid hexadecimal digits.  
XTRANLDATA (MIXED|DBCS) specifies extended translate local data format. This keyword  
specifies the format of the data on the local (i5/OS side) of the COPY.  
MIXED indicates that the data can contain both DBCS and SBCS characters and that SO/SI  
characters are used.  
DBCS indicates that the data is pure DBCS characters and that no SO/SI characters are used.  
XTRANPAD(pc) specifies that padding characters are in use. When DBCS data is translated  
from EBCDIC to ASCII, PAD specifies that the SHIFT-OUT and SHIFT-IN characters are  
replaced by a pad character to allow the displacement of fields within a record to remain  
unchanged during translation.  
When DBCS data is translated from ASCII to EBCDIC, PAD specifies that the input ASCII  
DBCS file is in a padded format. The character immediately preceding a DBCS character or  
string is overlaid by the SHIFT-OUT character. The character immediately following a DBCS  
character or string is overlaid with the SHIFT-IN character. This allows the displacement of fields  
within a record to remain unchanged during translation.  
pc is the pad character to be used during EBCDIC to ASCII translation. pc is ignored for  
ASCII to EBCDIC translations. If XTRANPAD is not used, the SI/SO characters are  
stripped from the file when transferring from EBCDIC to ASCII, and added to the records  
when sending from ASCII to EBCIDC.  
The following rules apply to the use of the XTRAN keyword:  
You must specify the XTRAN keyword to use extended translation. All other keywords are  
optional.  
The default for local shift-out is the IBM standard x0E.  
The default for local shift-in is the IBM standard x0F.  
The default local data format is MIXED with SO/SI in use. XTRAN is not allowed with  
PRECMPR(*YES) or DECMPR(*NO)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Receiving a File  
55  
If you receive a file from an ASCII platform using extended translation, you must specify in the  
FMSYSOPTS that the data type is binary. Refer to the IBM Sterling Connect:Direct Processes  
Web site at http://www.sterlingcommerce.com/documentation/processes/processhome.html for  
platform-specific SYSOPTS parameters.  
If you receive DBCS data from an ASCII platform using the XTRAN keyword, ensure that the  
record length of the file on the i5/OS side of the transfer is large enough to contain the translated  
record.  
The record length of the file on the i5/OS side of the transfer is generally larger than the ASCII  
equivalent. For additional information, refer to the Maintaining Extended Translation chapter of  
the IBM Sterling Connect:Direct for i5/OS Installation and Administration Guide  
CCSID(nnnnn) specifies the coded character set ID to use when creating IFS files. If no character set  
ID is specified, the system default is used.  
EORCHAR(xxxx) specifies the two-to four-digit hexadecimal symbol to identify the character to use  
in text files as the end-of-record character, for example, EORCHAR(0A).  
Optional Parameters  
The following parameters, listed alphabetically, are optional. Unless otherwise noted, the parameters apply to  
all remote node environments.  
CKPTINV(n)  
Number of bytes, from 1K to 2 gigabytes, to send or receive before taking a checkpoint. The format is  
nnnnnnn, nnnnnnK, or nnnnnnM, where K specifies thousands of bytes and M specifies millions of  
bytes. A value of 0 specifies no checkpoint restart Sterling Connect:Direct for i5/OS uses the value  
you specify, rounded up to the nearest record boundary, to determine when to take a checkpoint. If  
you specify a value between 1 and 1023, the value becomes 1024 or 1K.  
Checkpointing does not occur in the following cases, even if you specify a checkpoint interval:  
The file being received is compressed by the remote node during the receive operation by the  
local node using the extended compression feature but is not being decompressed on the local  
node. That is, the TOSYSOPTS has DECMPR(*NO).  
The file being received was precompressed on the remote node and is being decompressed on the  
local node during the receive operation. That is, the FMSYSOPTS has PRECMPR(*YES) and  
TOSYSOPTS has DECMPR(*YES).  
A single z/OS partitioned data set member is being received.  
A checkpoint interval specified here overrides the system-wide default value.  
If you request checkpointing when you are transferring multiple members of a file, checkpoints are  
taken only at member boundaries regardless of the interval specified in the initialization parameters or  
in the CDSND or CDRCV command.  
CLASS(n)  
determines the node-to-node session on which a Sterling Connect:Direct operation can execute. The  
CLASS can be a number from 1–255. If you do not specify the CLASS parameter, it defaults to the  
number of maximum sessions defined in the mode description for the communications environment.  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
56  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
COMPRESS(*NO | *YES| *EXT | X\xx\ | C\cc\ )  
specifies that the data is to be compressed, which reduces the amount of data transmitted as the file is  
copied from one node to another. The file is automatically decompressed at its destination unless  
DECOMP(*NO) is specified in TOSYSOPTS.  
Note: Compression is CPU-intensive. Its effectiveness is dependent on the data and line speed and  
should be used only if it benefits the installation.  
You should specify the primary compression character for text data or single-character repetitive data.  
Extended compression generally offers improved compression for all types of data.  
*NO specifies no compression.  
*YES enables compression. If *YES is specified, the default primary compression character is  
PRIMEchar=X\40\ (hex 40=“ ”).  
If you specify *YES, Sterling Connect:Direct reduces the amount of data transmitted based on the  
following rules:  
Repetitive occurrences (2–63) of the primary compression character are compressed to one byte.  
Repetitive occurrences (3–63) of any other character are compressed to two bytes.  
X\xx\ enables compression, where xx is the hexadecimal representation of the value to be used for the  
primary compression character.  
C\cc\ enables compression, where cc is the character representation of the value to be used for the  
primary compression character.  
*EXT specifies that extended compression is used to search for repetitive strings of characters in data  
and compress them to codes that are transmitted and converted back to the original string during  
decompression. Specify this parameter when line transmission speeds are limited, the CPU is  
available, and data is repetitive.  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
Determines whether node and Process statement overrides for Cyclic Redundancy Check (CRC) are  
allowed. If this value is set to *OFF, setting overrides for CRC checking will be ignored. The default  
value is *INITPARMS.  
*INITPARMS specifies that the CRC setting is determined by the value for the initialization  
parameter TCP.CRC.  
*NETMAP specifies that the CRC setting is determined by the value for the NETMAP parameter,  
Cyclic Redundancy Check. The value for the initialization parameter TCP.CRC must be set to *ON  
and the value for the initialization parameter TCP.CRC.OVERRIDE must be set to *YES.  
*OFF specifies that CRC is disabled.  
*ON specifies that CRC is enabled.  
ECTUNING (ecclevel,ecwinsize,ecmlevel)  
ECCLEVEL specifies the extended compression level, which affects how much CPU the extended  
compression routines use. Higher compression levels use more CPU but achieve greater compression.  
The valid values for this subparameter are 1–9, inclusive. The default value is *INITPARMS.  
ECWINSIZE specifies the extended compression window size, which is specifically for the history  
buffer that is filled from the user’s input buffer ( both compressing and decompressing). The window  
specifies the amount of storage designated to maintain data previously read.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Receiving a File  
57  
This data can be scanned for string matches. The extended compression window size affects how  
much virtual memory the extended compression routines use. Higher window size values use more  
memory but achieve greater compression. The valid values for this subparameter are 8–15, inclusive.  
The default value is *INITPARMS.  
ECMLEVEL specifies the extended compression memory level parameter, which determines how  
much memory should be allocated for other internal data structures like the hash table and the  
previous table (pointers to previous strings starting with the same 3 characters). The extended memory  
level affects how much memory the extended compression routines use. Higher memory levels use  
more virtual memory but achieve greater compression. The valid values for this subparameter are 1–9.  
inclusive. The default value is *INITPARMS.  
EXCLUDE(generic, member-name, (start-range/stop-range), ‘list’)  
specifies criteria that identifies the file members that are not to be copied. EXCLUDE allows you to  
make exceptions to members specified generically or by range in the SELECT option. Refer to the  
IBM Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html for the syntax and  
override priority for the SELECT and EXCLUDE parameters appropriate to the remote node.  
generic specifies a generic member name. For example, if you specify CD*, all member names  
beginning with CD are excluded.  
member-name specifies an individual member name.  
start-range/stop-range specifies first and last names in an alphanumeric range of members.  
Although member names in a range are treated as generics, they cannot be used with an asterisk (*). A  
slash (/) separates the first (start-range) and last (stop-range) member names. The two members  
specified, as well as all members in the range, are excluded.  
‘list’ specifies any combination of the subparameters.  
FALIAS(*YES|*NO)  
specifies whether aliases are copied when their associated member names are copied.  
FBUFND(n)  
specifies the number of I/O buffers VSAM uses for transmitting data between virtual and auxiliary  
storage. (A buffer is the size of a control interval in the data component.) Valid values range from  
1–510. The default is 2. Increasing this number generally improves the I/O performance on the file but  
requires more memory. This parameter is valid only when the source side is an z/OS node.  
FDBPARMS(dbid, dbsubid)  
indicates that the Sterling Connect:Direct for z/OS SQL SERVER is to process the I/O request against  
the database identified by the subparameters of this keyword and defined by the SQL= parameter. The  
DBPARMS parameter is used with the optional Sterling Connect:Direct for SQL feature. This  
parameter is valid only when the source side is a z/OS node. Only DB2 is supported.  
To determine the values to code to access a given DB2 table or set of DB2 tables, consult your  
database administrator.  
dbid specifies the 1–4 byte DB2 database ID.  
dbsubid specifies the 1–4 byte DB2 database sub-ID.  
FDCB(modeldcb, blksize, den, dsorg, keylen, linct, lrecl, optcd, recfm, rkp, trtch)  
overrides attributes of the source file. DCB attributes are determined from the operating system unless  
specified.  
modeldcb specifies a model data set control block (DSCB).  
blksize specifies the length in bytes of the block. The minimum length is 18 bytes, and the maximum  
length is 32,760 bytes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
58  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
den specifies the magnetic tape mode setting. The following table shows the values for the DEN  
parameter for 7- and 9-track tapes. When coded together, the DEN and TRTCH values are used to  
select a tape device for allocation by Sterling Connect:Direct for z/OS.  
DEN  
7-Track Tape  
9-Track Tape  
1
2
3
4
556 bpi  
--  
800 bpi  
800 bpi  
1600 bpi  
6250 bpi  
--  
--  
dsorg specifies the file organization. Supported file organizations are BDAM, ISAM, PO, PS, and  
VSAM.  
keylen specifies the length of the keys used in a file. Maximum length in bytes is 255.  
linct specifies the blocks or tracks searched to find a free block or available space.  
lrecl specifies the record length in bytes.  
optcd specifies optional processing associated with this file. This specification only applies to this file  
and is not automatically applied to the other files involved in the RECEIVE operation.  
Valid options are:  
W performs write validity checks on direct access storage devices.  
Q performs ASCII-to-EBCDIC conversion for input files and EBCDIC-to-ASCII conversion for  
output files. Q is the default and only used for AL-labeled tape files.  
Z performs reduced error recovery for tape files.  
recfm specifies the format of the records in the file. You can specify any valid record format, such as:  
F specifies fixed format.  
FA specifies fixed format with ASA printer control.  
FB specifies fixed block format.  
FBA specifies fixed block format with ANSI carriage control.  
FM specifies fixed format with machine code control character.  
U specifies undefined format.  
V specifies variable format.  
VB specifies variable block format.  
VBA specifies variable block format with ASA printer control.  
VBM specifies variable format with block machine code control character.  
VS specifies variable spanned format.  
VBS specifies variable block spanned format.  
For FDR volumes, you must specify RECFM=U.  
rkp specifies the position of the first byte of the record key within each logical record. The beginning  
byte of a record is addressed as 0.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiving a File  
59  
trtch specifies the magnetic tape mode setting. When coded together, Sterling Connect:Direct for  
z/OS uses the TRTCH and DEN values to select a tape device for allocation. Valid options are:  
C specifies data conversion, odd parity, and no translation.  
E specifies no data conversion, even parity, and no translation.  
T specifies no data conversion, odd parity, and BCD or EBCDIC translation.  
ET specifies no data conversion, even parity, and BCD or EBCDIC translation.  
COMP is a feature for 3480X tape drives only. It enables Improved Data Recording Capability  
(IDRC), which compresses the data. This subparameter overrides the system-wide IDRC setting  
for no compression. If you are specifying COMP, you must also include a UNIT= parameter that  
specifies either 3480X or a systems programmer-defined name equivalent to a 3480X tape drive.  
NOCOMP overrides the system-wide IDRC setting for compression. NOCOMP applies to  
3480X tape drives only.  
FDISP(current, normal end, abnormal end)  
specifies the status of the remote file and what is to be done with the file after notification of  
successful transmission.  
current specifies the status of the file. Valid values are:  
SHR specifies that the file can be read simultaneously by another operation. SHR is the default.  
OLD specifies that the operation is to be given exclusive control of the file.  
normal end specifies the disposition of the file following normal operation termination. Valid  
dispositions are as follows:  
KEEP specifies that the system is to keep the file after the operation completes.  
DELETE specifies that the system is to delete the file after the operation completes.  
abnormal end specifies the disposition of the file after abnormal operation termination. Valid source  
file dispositions are:  
KEEP specifies that the system is to keep the file after the operation terminates abnormally.  
DELETE specifies the system is to delete the file if the operation terminates abnormally.  
For subparameters for other Sterling Connect:Direct platforms, refer to the IBM Sterling  
Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html.  
Note: Currently, normal end disposition and abnormal end disposition are not applicable for  
Sterling Connect:Direct for i5/OS.  
FIOEXIT(program-name)  
specifies the name of the user-written program to be given control for I/O-related requests for the  
associated data.  
FIOPARM(parameter-name)  
specifies a parameter, or list of parameters, to be passed to the specified exit. This parameter is valid  
only when the source side is a z/OS node. The FIOPARM syntax depends on the parameter list that  
the program specified in FIOEXIT requires.  
FLABEL(seqno, labeltype, pswdread, inout, retpd|expdt)  
specifies label information for the tape.  
seqno specifies the relative file position on the tape.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
60  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
labeltype is designated as:  
SL specifies IBM standard labels.  
AL specifies American National Standard labels.  
BLP specifies bypass label processing.  
LTM specifies bypass leading tape marks.  
NL specifies no labels.  
pswdread specifies that a password must be supplied by the operator or user before the file can be  
accessed.  
inout specifies that a BSAM data set opened for INOUT or a BDAM data set opened for UPDAT is to  
be read only.  
retpd specifies the retention period for the data set in days, where nnnn is 1–4 digits.  
expdt specifies the expiration date for the data set, where yyddd or yyyyddd is a valid Julian date.  
FLINK(vmuserid,pwd,accmode,ccuu)  
specifies the disk where the CMS file is located. This parameter allows the user to access the CMS  
file. This parameter is valid for VM nodes only.  
vmuserid specifies the owner ID for the CMS minidisk where the file is located. The valid length  
ranges from 1–8 characters.  
pwd specifies the appropriate password for the CMS minidisk where the file is located. The maximum  
length is 256 characters. The default password is ALL.  
accmode specifies the link access mode.  
When used with the FROM parameter, the access modes are W (primary read/write access), M  
(primary multiple access), R (primary read only), RR (primary and secondary read only access), WR  
(primary read/write access; alternate read only access), MR (primary multiple access; alternate read  
only access), and MW (primary multiple access; alternate read/write only access).  
When used with the TO parameter, the access modes are W, M, and MW.  
ccuu specifies the virtual address of the disk where the CMS file is located. A three-digit number is  
valid.  
FMSVGP(data-set-name)  
specifies the remote file mass storage volume group that resides on a mass storage system (MSS)  
device. This group must be a valid DD (data definition) name. This parameter is valid when the source  
side is a z/OS node only.  
FPDSDIR(*YES|*NO)  
specifies whether the user-related information in the directory is sent.  
FSQL(sql-statement|DSN=data-set-name)  
defines the SQL statement to be processed against the database identified by the DBPARMS  
parameter or the DSN containing the SQL statements. The SQL parameter is used with the optional  
Sterling Connect:Direct for z/OS SQL feature. This parameter is valid only when the source side is an  
Sterling Connect:Direct for z/OS node.  
sql-statement defines the actual SQL statement to be processed.  
data-set-name specifies the data set containing the SQL statements to be processed.  
FTYPE(entry-name)  
specifies the entry name of the type defaults file on the remote node that contains the default file  
attributes. Specify this typekey only when the user requests defaults.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Receiving a File  
61  
FUNIT(name)  
specifies the unit address, device type, or user-assigned group name where the file resides or will  
reside. For SAM-to-SAM copies where the destination file is new and the UNIT parameter is not  
coded, the device type from the source file is used. For VSE nodes, you must specify either this  
parameter or FVOL.  
Specify a unit-count to allow additional units to be allocated if required, or specify P to allocate the  
same number of units as volumes and then parallel mount the volumes. This parameter is valid only  
when the source side is a z/OS node.  
FVOL(private, volcount, ser)  
specifies the volume serial numbers containing the file and optional processing associated with the  
file. If VOL is not specified, the file must be cataloged. For VSE nodes, you must specify either this  
parameter or FUNIT.  
private specifies allocation of an output file only if the volume is specifically requested and is used  
for direct access storage devices only. Valid values are *YES and *NO.  
volcount specifies the maximum number of volumes required by an output file.  
ser identifies by serial number the volumes on which the output file resides or will reside.  
FVOLREF(data-set-name)  
allows you to retrieve the specified data set from the same volume as the referenced data set. You  
must catalog it on the system where it is referenced. This parameter is valid only when the source side  
is a z/OS node.  
FVSAMCAT(dsn,vmid,pwd,accmode,cuu)  
specifies the catalog for the VSAM file to be copied. This parameter is required only if using a catalog  
other than the master catalog.  
dsn specifies the filename of the VSAM catalog containing the file to be copied. The maximum length  
is 44 characters.  
vmid specifies the owner ID for the VSAM minidisk where the file is located. The maximum length is  
eight characters.  
pwd specifies the appropriate password for the VSAM minidisk where the file is located. The  
maximum length is eight characters.  
accmode specifies the link access mode. Valid access modes are NULL, W (primary read/write  
access), M (primary multiple access), and MW (primary multiple access; alternate read/write only  
access).  
cuu specifies the virtual address of the disk where the VSAM file is located. Any three-digit number  
is valid.  
NOTIFY(userid)  
specifies the user ID on the local node to receive status messages that are directed to the user’s  
message queue.  
PLEXCLASS(user-defined class)  
specifies a user-defined class containing up to eight characters associated with a Sterling  
Connect:Direct/Server in a Sterling Connect:Direct/Plex environment. This represents a type of server  
on which you want to run a task, for example TAPE.  
Note: This parameter is for use only in Sterling Connect:Direct for z/OS environments.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
62  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
PNAME(process-name)  
identifies the Process in any messages or statistics. The name can be from 1 to 12 characters long. The  
first character must be alphabetic. The default name is CDRCV.  
Note: Only Sterling Connect:Direct for i5/OS and Sterling Connect:Direct for UNIX support  
Process names with more than 8 characters.  
PNODEID(id, pswd, newpswd)  
specifies security user IDs and passwords at the local i5/OS node. Use this parameter only to validate  
security with a different ID than the one you used to sign on to the system.  
id specifies the security ID passed to the security system at the remote node (1–10 alphanumeric  
characters).  
pswd specifies the current security password for the specified ID. The security system can use this  
parameter at the remote node to validate the current security password (1–10 alphanumeric  
characters). This is optional unless the user has security set to require a password.  
newpswd specifies the new security password. Sterling Connect:Direct for i5/OS does not support  
this parameter.  
REPLACE(*YES|*NO)  
specifies that the remote file or PDS replaces members of the same name at the local file.  
RMTWORK(*YES|*NO)  
specifies whether a remote Process can run on the session after Sterling Connect:Direct for i5/OS has  
completed its Process on the session.  
*YES allows a remote Process to run on the session after Sterling Connect:Direct for i5/OS completes  
its Process.  
*NO terminates the session after Sterling Connect:Direct for i5/OS executes the command function.  
SACCT(snode-accounting-data)  
specifies the accounting data for the remote node. The maximum length of the accounting data is 256  
characters. If special characters are part of the accounting data, you must enclose the string in single  
quotation marks.  
SECOPTIONS(* *)  
specifies Encryption and Digital Signature values.  
Encryption specifies if data encryption is to be performed and what algorithm to use.  
Digital Signature specifies if a digital signature is created while a file is being transmitted.  
Note: The SECOPTIONS parameter is valid only if the Sterling Connect:Direct Secure Plus is  
installed. For information about these parameters, refer to the IBM Sterling Connect:Direct  
Secure Plus for i5/OS Implementation Guide.  
SELECT(member, new-name, R/NR,‘list’)  
specifies selection criteria by which file members are to be copied. Refer to the IBM Sterling  
Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html for the syntax and  
override priority for the SELECT and EXCLUDE parameters appropriate to the remote node.  
Use this parameter when you specify TYPE(FILE) in the TOSYSOPTS parameter.  
The SELECT parameter consists of three positional subparameters separated by commas.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Receiving a File  
63  
member specifies the members to be copied. Member selections are:  
* represents a global generic. A global generic indicates that all members of the file are to be  
included.  
generic specifies a generic member name. For example, if you specify CD*, all member names  
beginning with CD are selected for copying.  
member-name specifies an individual member name.  
start-range/stop-range specifies first and last names in an alphanumeric range of members.  
Although member names in a range are treated as generics, they cannot be used with an asterisk  
(*). A slash (/) separates the first (start-range) and last (stop-range) member names. The two  
members specified, as well as all members in the range, are copied.  
new-name specifies a new name for a member. You cannot use the new-name subparameter if a  
generic or range is used to select the members to be copied, or if you specify a list of member names.  
R/NR specifies whether a copied member replaces an existing member of the same name in the local  
file. When used with a generic or a range, this subparameter applies to all members selected.  
Note: When using a generic and specifying NR or R, the second positional subparameter  
(new-name) must be null, for example, member-name,,NR.  
R specifies that a member replaces an existing member of the same name in the local file. When  
used with the new-name subparameter, R applies to the specified new-name and not the original  
member name.  
NR specifies that a member does not replace an existing member of the same name in the local  
file. NR overrides the REPLACE parameter.  
‘list’ specifies any combination of the subparameters. You can specify a list of individual  
member names or generic member names separated by spaces. However, you cannot use the  
new-name and replace-member subparameters when specifying a list.  
Note: Member names longer than eight characters are truncated to eight characters when the  
remote node is not an i5/OS node.  
SNODEID(id, pswd, newpswd)  
specifies security user IDs and passwords at the remote node. If nothing is specified for this  
parameter, the user profile of the user who submits the command is sent to the remote node with a  
blank password.  
id specifies the security ID passed to the security system on the remote node (1–64 alphanumeric  
characters).  
pswd specifies the current security password. The security system can use this parameter on the  
SNODE to validate the current security password (1–64 alphanumeric characters). This is optional  
unless the user has set security to require a password.  
newpswd specifies the new security password. Sterling Connect:Direct for i5/OS does not currently  
support this parameter if the remote node is an i5/OS node.  
Note: Parameter values are case sensitive.  
TDISP(current)  
specifies the status of the file on the local i5/OS node.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
64  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
current specifies the status of the file before the operation executes. Valid values for this  
subparameter are:  
NEW specifies that the operation creates the destination file or member. If you are creating a  
member, the file can already exist but the member must not already exist. If you are creating a file  
(SAVF), the file must not already exist.  
OLD specifies that the destination file or member already exists. The operation has exclusive  
control of the member. If the file or member does not exist, the receive operation fails.  
MOD specifies that the operation modifies the file or member by adding data to the end of the  
member or, if none exists, allocates a new member. The file is also created if it does not exist.  
RPL indicates that the destination file or member is replaced. The file is created if it does not  
exist.  
SHR indicates that another operation can read the file simultaneously. The file or member is  
created if it does not exist on i5/OS.  
Note: Currently, normal end disposition and abnormal end disposition are not applicable when  
sending to Sterling Connect:Direct for i5/OS.  
TRACEOPT  
Trace Instructions  
(L, S, F, C, X, K, D, H, V, W, P,|*NONE|*ALL|*EXT| *COMMON|*INITPARMS|*CURRENT  
specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The  
following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the communications logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
W enables the communications dump.  
P enables the CIPC dump.  
*NONE turns off all traces.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)  
*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).  
*COMMON enables the communications traces. (L, S, F, C, and H)  
*INITPARMS indicates the traces specified in the initialization parameters.  
*CURRENT selects the trace bits that the session manager is currently using.  
Command Trace Options  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON| *NONE)  
specifies the trace bits that define functions to be traced for this command but not for the Process it  
runs. The following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Receiving a File  
65  
F enables the file handler trace.  
C enables the common logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
P enables the CIPC dump.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, and P)  
*EXT enables all product traces plus two other traces. (TRCICF and TRCJOB)  
*COMMON enables the most commonly used traces. (L, S, F, C, and H)  
*NONE turns off all traces.  
Using Block Mode Transfer  
Sterling Connect:Direct for i5/OS supports block mode transfer of COPY operations. In this mode, Sterling  
Connect:Direct uses the file block as the data unit. Using the block mode transfer improves performance  
because the remote and local nodes handle fewer data units. This type of transfer reduces instruction path  
length and decreases execution time. Larger units move between Sterling Connect:Direct and the file access  
routines, requiring fewer calls to the access routines and further improving performance.  
Sterling Connect:Direct for i5/OS simulates block reads and writes. Using logical blocks instead of physical  
blocks, Sterling Connect:Direct for i5/OS allows you to modify the blocksize to match the other node in some  
cases.  
Sterling Connect:Direct for i5/OS supports block mode transfer when the following conditions exist:  
Remote node supports block mode  
Source and destination files have like characteristics  
Files are supported file types  
Sterling Connect:Direct for i5/OS supports block mode transfers for the following i5/OS file types:  
DB2 for i5/OS files (without staged compression)  
Spool files  
Save files  
Stream files (using the integrated file system)  
Simulating Blocksizes  
The simulated blocksize determines whether a block mode transfer occurs. If the block mode transfer does  
occur, the simulated blocksize is used for the transfer. The following rules determine what simulated blocksize  
Sterling Connect:Direct for i5/OS uses.  
As the local node, Sterling Connect:Direct for i5/OS determines the simulated blocksize by these conditions in  
order of precedence:  
Destination file blocksize specified on the request  
Source file blocksize sent by the remote node in the COPY control block  
If neither condition exists, Sterling Connect:Direct uses the record mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
66  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
As the remote node, Sterling Connect:Direct for i5/OS determines the simulated blocksize by these conditions  
in order of precedence:  
Source file blocksize specified on the request  
Destination file blocksize specified on the request  
Calculated value*  
*Largest multiple of record size less than some arbitrary value, such as 4096.  
Block Mode Transfer Examples  
The following block mode transfer examples include both sending and receiving examples.  
CDRCV Examples-Not Specifying Source File Blocksize  
In the first example, the request does not specify the source file blocksize. In this scenario, the following  
occurs:  
The Sterling Connect:Direct for i5/OS node sets the source file simulated blocksize to 3200 by using the  
destination file value.  
The receiving Sterling Connect:Direct for i5/OS sets the destination file simulated blocksize to the value  
specified on the request.  
Because the blocksizes match, the block mode copy occurs.  
C:D i5: receiving  
request: source blksize=not specified; dest blksize = 3200  
srce file: lrecl=80, (on another C:D i5 3.3 node)  
dest file: NEW  
CDRCV Example-Specifying Source File Blocksize  
In the second example, the following occurs:  
Sterling Connect:Direct for i5/OS calculates the simulated blocksize at 3200 because the destination file is  
new and the source file specifies a blocksize.  
The receiving node uses the existing destination file blocksize of 3200.  
A block mode transfer occurs because the blocksizes match.  
C:D i5: receiving  
request: source blksize=not specified;dest blksize = not specified;  
srce file: lrecl=80, blksize=3200 (on z/OS node)  
dest file: NEW  
CDSND Examples-Simulating Blocksize  
In the third example, the following events occur:  
Sterling Connect:Direct for i5/OS sets the simulated blocksize at 6400 from the request.  
The receiving node creates the destination file using source file attributes of blksize=6400.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Receiving a File  
67  
Because the file attributes match, the block mode transfer occurs.  
C:D i5: sending  
request: source blksize=6400; dest blksize = not specified;  
srce file: lrecl=80  
dest file: NEW (on z/OS)  
CDSND Examples-Setting Actual Blocksize  
In the fourth example, the following events occur:  
the remote node sets the destination file blocksize to 3200, the actual blocksize of the destination file.  
Sterling Connect:Direct for i5/OS calculates the simulated blocksize at 3200.  
The blocksizes are identical, so block mode transfer occurs.  
C:D i5: sending  
request: source blksize=not specified; dest blksize = not specified;  
srce file: lrecl=80  
dest file: existing: lrecl=80, blksize=3200 (on z/OS)  
CDSND and CDRCV Example  
In the fifth example, Sterling Connect:Direct for i5/OS calculates the simulated blocksize at 32720 since the  
copy is between two Sterling Connect:Direct for i5/OS nodes.  
C:D i5 sending and receiving  
request: source blksize=not specified; dest blksize=not specified  
srce file: lrecl=32720  
dest file: new  
Using the CDRCV Screens  
Use the Sterling Connect:Direct Receive File (CDRCV) screens to initiate a Sterling Connect:Direct session  
and receive a file from a remote node. CDRCV uses certain special function keys as follows:  
F24 more keys gives you access to additional function keys used in CDRCV.  
F5 refresh which clears any field entries you have made.  
F9 which gives you access to all parameters.  
F11 which displays key words.  
F14 which displays command strings.  
F15 which displays any error messages pending.  
F16 which marks the command complete.  
Receiving a File From a Remote Node  
Complete the following steps to receive a file from a remote node.  
1. Access the CDRCV screens by typing CDRCV at the command line and pressing F4 or by choosing the  
receive file option from the Sterling Connect:Direct main menu.  
2. Type in the remote node name at the screen prompt and press Enter. The command retrieves the remote  
node environment and display fields for required parameters.  
3. Type values for required and optional parameters as appropriate and press Enter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
68  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
The following are samples of the screens in the Sterling Connect:Direct Receive File (CDRCV) screen flow.  
The sample shows the keyword display option.  
Connect:Direct Receive File (CDRCV) Screen 1  
Connect:Direct Receive File (CDRCV)  
Type choices, press Enter.  
Sending Node Name . . . . . . .  
Sending Node Environment . . . .  
Sending File Name . . . . . . .  
OS/400, AS400, MSP, MVS...  
Receiving File Name . . . . . .  
Receiving System Operations . .’TYPE(FILE)'  
...  
More...  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F13=How to use this display  
F24=More keys  
The content of this screen and the screens that follow depend on the remote node environment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Receiving a File  
69  
Connect:Direct Receive File (CDRCV) Screen 2  
Connect:Direct Receive File (CDRCV)  
Type choices, press Enter.  
Sending System Operations . . . .  
.’TYPE(FILE)'  
...  
Trace Options:  
Trace Instructions . . . . . .  
Command trace options . . . .  
Process Name . . . . . . . . . .  
Receiving Node User Info.:  
User Id . . . . . . . . . . .  
Password . . . . . . . . . . .  
New Password . . . . . . . . .  
User to Notify . . . . . . . . .  
*CURRENT  
*NONE  
CDRCV  
Name  
*CURRENT  
Character value, *CURRENT  
Character value  
Character value  
*CURRENT  
Name, *CURRENT, *NONE  
More...  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
Connect:Direct Receive File (CDRCV) Screen 3  
Connect:Direct Receive File (CDRCV)  
Type choices, press Enter.  
Sending Node User Info.:  
User Id . . . . . . . . . . ._____________________________________________________  
________________________________  
Password . . . . . . . . . . .  
New Password . . . . . . . . .  
Class . . . . . . . . . . . . .  
Sending Accounting Data . . . .  
*MODED  
1-255, *MODED  
_________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________  
Checkpoint Interval . . . . . .  
Allow remote process . . . . . .  
*INITPARMS  
*NO  
0-9999999, *INITPARMS  
Character value, *YES, *NO  
More...  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
70  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Connect:Direct Receive File (CDRCV) Screen 4  
Connect:Direct Receive File (CDRCV)  
Type choices, press Enter.  
File Members Selection List . .____________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________  
File Members Exclusion List . .____________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________  
Same Member Replaced . . . . . .  
CRC . . . . . . . . . . . .  
*YES  
*INITPARMS  
*YES, *NO  
*INITPARMS, *NETMAP, *ON, *OFF  
Secure+ Options:  
Encryption . . . . . . . . . .  
Digital Signature . . . . . .  
Compress Data . . . . . . . . .  
*_______  
*
*NO  
*/Y/N/Algorithm  
*, N, Y  
Character value, *NO, *YES...  
More...  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F13=How to use this display  
F24=More keys  
Connect:Direct Receive File (CDRCV) Screen 5  
Connect:Direct Receive File (CDRCV)  
Type choices, press Enter.  
Extended compression tuning:  
Extended compression level . .  
Extended compression window .  
Extended compression memory .  
Sending File Type Parameter . .  
Receiving File Disposition:  
Current Disposition . . . . .  
Normal End Disposition . . . .  
Abnormal End Disposition . . .  
*INITPARMS  
*INITPARMS  
*INITPARMS  
1-9, *INITPARMS  
8-15, *INITPARMS  
1-9, *INITPARMS  
Character value  
NEW  
CATLG  
_____  
NEW, OLD, MOD, RPL, SHR  
CATLG, KEEP  
KEEP, CATLG, DELETE  
More...  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F13=How to use this display  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Receiving a File  
71  
Connect:Direct Receive File (CDRCV) Screen 6  
Connect:Direct Receive File (CDRCV)  
Type choices, press Enter.  
Sending DCB Info.:  
Model File Name . . . . . . . __________________________________________________  
____________________________________  
Block Size in bytes . . . . .  
Tape Mode Density Setting . .  
Organization of File . . . . .  
Key Length of file . . . . . .  
Searching Free Block/Space . .  
Record Length in bytes . . . .  
Process Option . . . . . . . .  
Record Format . . . . . . . .  
Position of 1st Byte of Key .  
Tape Mode Setting . . . . . .  
______  
__  
_
Character value  
1, 2, 3, 4  
BDAM, ISAM, PO, PS, VSAM...  
Character value  
Character value  
Character value  
W, Q, Z  
F, FA, FB, FBA, FM, U, V...  
Character value  
C, E, T, ET, COMP, NOCOMP  
000  
00000  
00000  
_
_____  
_
_____  
Bottom  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
72  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5  
Sending a Spool File  
This chapter describes the Sterling Connect:Direct Send Spool (CDSNDSPL) command and its function. It  
shows sample CDSNDSPL screens and describes the required and optional parameters for the CDSNDSPL  
command.  
Using the CDSNDSPL Command  
Use the CDSNDSPL command to send a spool file on the local i5/OS node to a remote node. You can also send  
spool files to a remote printer through the Sterling Connect:Direct for i5/OS Spool Monitor. You can specify a  
user-exit command (either EXITCMD or FAILCMD) to be executed after the completion of a copy process in  
either FROMSYSOPTS or TOSYSOPTS. Using EXITCMD, you can specify a command to be executed only  
if the copy process is successful. You can also specify a command to be executed only if the copy process is not  
successful by using the FAILCMD command. The EXITCMD and FAILCMD are executable i5/OS  
commands as well as Sterling Connect:Direct as long as the size of the command does not exceed 127 bytes.  
Refer to Maintaining Spool Support in the IBM Sterling Connect:Direct for i5/OS Installation and  
Administration Guide.  
CDSNDSPL Command Example  
The command that follows is an example of using the CDSNDSPL command.  
CDSNDSPL SNODE(CD2200) SNODENVIRN(AS400) SPLF(CDLOG) JOB(CDSMGR  
CDADMIN  
nnnnnn) SPLFNUM(1) TDSN(’qa/splfout(splfout)’)  
TDISP(RPL)  
TOSYSOPTS(’TYPE(mbr)’)  
CDSNDSPL Command Format  
The following parameters are for the CDSNDSPL command. Required parameters are shown in bold.  
Command  
Parameters  
CDSNDSPL  
SNODE(remote-node-name)  
SNODENVIRN(remote-environment-name)  
SPLF(name)  
Sterling Connect:Direct Secure Plus for i5/OS parameter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
74  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Command  
Parameters  
JOB(*|job-name user-name job-number)  
SPLFNUM(n|*ONLY|*LAST)  
TDSN(spooled-file-name|data-set-name)  
TOSYSOPTS(‘  
DECMPR(*YES|*NO)  
EXITCMD(valid i5/OS command)  
FAILCMD(valid i5/OS command)  
TYPE(FILE|MBR|OBJ|SPLF)  
CODEPAGE(nnnnn,nnnnn)  
XTRAN(table-name)[XTRANLSO(so-code)|XTRANLSI(si-code)|XTRANLDATA(MIXED|DBCS)XT  
RANPAD(pc)]  
CCSID(nnnnn)  
EORCHAR(xxxx)  
’)  
Note: TOSYSOPTS is required if remote node is on i5/OS  
BLKSIZE(n|*CALC)  
CHLVAL(*NORMAL|(channel#1 line#1)...(channel#12 line#12))  
CKPTINV(n)  
CLASS(n)  
COMPRESS(*YES|*NO|X\xx\|C\cc\|EXT)  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
CTLCHAR(*NONE|*FCFC|*PRTCTL)  
ECTUNING(ecclevel,ccminsize,ecmlevel)  
FDSNLEN(*SPLF)  
NOTIFY(userid)  
PLEXCLASS(user-defined class)  
PNAME(name)  
PNODEID(id, pswd, newpswd)  
PRTY(n)  
RMTWORK(*YES|*NO)  
SACCT(snode-accounting-data)  
SECOPTIONS(* *)  
SNODEID(id, pswd, newpswd)  
TBUFND(n)  
TDBPARMS(dbid,dbsubid)  
TDCB(modeldcb, blksize, den, dsorg, keylen, limct, lrecl, optcd, recfm, rkp, trtch)  
TDISP(current |normal end |abnormal end)  
TIOEXIT(program-name)  
Sterling Connect:Direct Secure Plus for i5/OS parameter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sending a Spool File  
75  
Command  
Parameters  
TIOPARM(parameter-name)  
TLABEL(seqno,labeltype,pswdread,inout,retpd,expdt)  
TLINK(vmid,pwd,accmode,cuu)  
TMSVGP(data-definition-name) (For z/OS nodes only)  
TPROTCT(*YES|*NO)  
TRACEOPT  
Trace Instructions:  
(L,S,F,C,X,K,D,H,V,W,P|*NONE|*ALL|*EXT|  
*COMMON|*INITPARMS|*CURRENT  
Command Trace Options:  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON|  
*NONE)  
TSPACE(avgblk,type,primary,secondary,pdsblk,rise, contig,round) (For z/OS nodes only)  
TSQL(sql-statement|DSN=data-set-name) (For z/OS nodes only)  
TTYPE(name)  
TUNIT(unit-name)  
TVOL(*YES|*NO)  
TVOLREF(data-set-name) (For z/OS nodes only)  
TVSAMCAT(dsn|vmid|pwd|accmode|cuu)  
Sterling Connect:Direct Secure Plus for i5/OS parameter.  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
Required Parameters  
Unless otherwise noted, these required parameters apply to all remote node environments.  
SNODE(remote-node-name)  
specifies a 1–16 character alphanumeric name for the remote node.  
Note: This value is case sensitive.  
SNODENVIRN(remote-environment-name)  
specifies the remote node environment.  
SPLF(name)  
specifies the name of the spooled output file to be copied.  
JOB(*|job-name user-name job-number)  
specifies the name of the job that created the spooled output file. Valid values are:  
* specifies that the job issuing the command is the job that created the spooled output file.  
job-name specifies the name of the job that created the spooled-output file.  
user-name specifies the user name that identifies the user profile for the job.  
job-number specifies the system-assigned job number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
76  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
SPLFNUM(n|*ONLY|*LAST)  
specifies the spooled output file number from the job whose data records are to be sent. Valid values  
are:  
1–9999 indicates to copy the specified spooled output file number.  
*ONLY indicates that only one of the job’s spooled output files has the specified file name.  
*LAST indicates to copy the highest-numbered spooled output file with the specified job name.  
TDSN(spooled-file-name|data-set-name)  
specifies the remote file name.The length of the input field displayed is 132 characters, by default. To  
increase the length of the field to 256 characters, type an ampersand(&) followed by a blank in the  
first two positions of the field.  
Note: Do not use member names longer than eight characters when sending to z/OS nodes. The  
results are unpredictable.  
If the remote node is a Sterling Connect:Direct for i5/OS node, TDSN specifies the destination file  
name. File names are verified based on the i5/OS standard file name conventions. If you are using  
Sterling Connect:Direct for i5/OS with the F4 prompt feature, the system supplies the single quotes if  
you fail to type them with the file name on the command line.  
spooled-file-name specifies the name to be used for the spooled file when placed in the Sterling  
Connect:Direct out queue on the remote system. Use this parameter when you specify  
(’TYPE(SPLF)’) in the TOSYSOPTS.  
data-set-name specifies the remote file name to be copied. The source file member name is used for  
the destination database file member name when you use TOSYSOPTS(‘TYPE(FILE)’), unless you  
specify otherwise with the SELECT parameter. The file name is used for the member name when you  
use TOSYSOPTS(‘TYPE(MBR)’).  
Note: For TDSN, the values of *LIBL, *CURLIB, and QTEMP cannot be used when sending to an  
i5/OS system. A specific library name must be used for copying to a data set on the i5/OS.  
For additional information about valid platform-specific parameters, refer to the IBM Sterling  
Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html.  
The following table summarizes the data set name requirements for Sterling Connect:Direct  
platforms.  
SNODENVIRN  
TDSN  
Format  
Special Considerations  
OS/400  
Native File System  
Enclose in single quotation marks.  
‘library-name/file-name’ ‘library-name/file-name  
(member-name)’  
Integrated File System  
‘/QSYS.LIB/library-name.LIB /file-name.FILE  
/member-name.MBR’  
You cannot specify the *SNDFFD,  
*SELECT, and *EXCLUDE parameters  
with the integrated file system.  
or  
‘/directory/file-name| /QLANSrv/file-name|  
/QDLS/folder-name| /QOpenSys/file-name’  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sending a Spool File  
77  
SNODENVIRN  
TDSN  
Format  
Special Considerations  
Spool File Support  
spooled-file-name  
Do not use member names longer than  
eight characters when sending to z/OS,  
VSE, and MSP. Results are  
unpredictable.  
OS/390, VSE,  
MSP  
Standard z/OS DSN naming conventions.  
Single quotes allow special characters.  
Do not use member names longer than  
eight characters. The results are  
unpredictable.  
VM  
Fully qualified file-name  
Tandem  
\system.$volume.subvolume.filename  
Microsoft  
Windows  
drive:\directory\subdirectory\filename  
or  
\\servername\sharepointname\subdirectory\filename  
UNIX  
/directory/subdirectory/filename  
OpenVMS  
node::device:[directory]filename.type;version  
When you are copying a file, the file  
specification must be enclosed in single  
quotation marks if it uses spaces or  
other special characters not recognized  
by the other node.  
Stratus VOS  
Fully qualified path and file name  
Enclose the file name in double  
quotation marks when you use a  
reserved word (statement name or  
keyword) for the file name.  
TOSYSOPTS(‘  
DECMPR(*YES|*NO)  
EXITCMD(valid i5/OS command)  
FAILCMD(valid i5/OS command)  
TYPE(FILE|MBR|SPLF)  
XTRAN(table-name) [XTRANLSO(so-code)|  
XTRANLSI(si-code)|XTRANLDATA(MIXED|DBCS)]  
CCSID(nnnnn)  
EORCHAR(xxxx)  
’)  
specifies system operation parameters at the remote node. The maximum number of characters  
permitted for TOSYSOPTS is 2K. This parameter is only required when the remote file is on another  
Sterling Connect:Direct for i5/OS node.  
For additional information about valid SYSOPTS parameters, see the appropriate COPY statement  
chapter of the IBM Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html.  
EXITCMD specifies a command to be executed only if the copy process is successful.  
FAILCMD specifies a command to be executed only if the copy process is not successful.  
DECMPR(*YES|*NO) states whether the remote Sterling Connect:Direct should decompress the  
received file. DECMPR(*NO) instructs the remote system to place the received data in a database file  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
78  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
without decompressing it. The option DECMPR(*NO) cannot be specified if you are using Sterling  
Connect:Direct Secure Plus to perform a secured copy function.  
Note: Ensure that the destination file contains no members before you send a file with  
DECMPR(*NO) specified.  
TYPE(FILE|MBR|SPLF) specifies the type of data to be sent. You must define the type of data to be  
copied as one of the following:  
FILE specifies that the file being copied is a physical database file.  
MBR specifies that the object being copied is a member of a physical database file.  
SPLF specifies that the data is to be copied to an i5/OS spooled output file.  
For each TYPE, you can specify certain parameters as follows.  
The following parameters are valid for TYPE(FILE) and TYPE(MBR) files:  
RCDLEN(record-length) specifies the data length for each record in the file.  
FILETYPE(*SRC|*DATA) establishes the type of file to be created. Use this parameter  
whenever a file is created.  
TEXT(‘text description’) sets a text description to be associated with this member (and file, if  
created). This description cannot exceed 50 characters and must be enclosed in single quotes.  
EXPDATE(expiration-date) specifies the date after which the new or replaced member is no  
longer valid. If EXPDATE is not specified, then the file does not have an expiration date.  
MAXMBRS(number|*NOMAX) specifies the maximum number of members a physical file  
can contain.  
SIZE(#-of-recs, incr-value #-of-incrs|*NOMAX) is used when a new file is created for the file  
received.  
AUT(*CHANGE|*ALL|*USE|*EXCLUDE) specifies the authority to give to a user who does  
not have specific authority to the file or member, is not on the authorization list, and whose user  
group does not have specific authority to the file or member.  
The following parameters are valid for TYPE(SPLF) files:  
DEV(*JOB|*SYSVAL|device-name) specifies the name of the printer device description.  
DEVTYPE(*IPDS|*SCS|*USERASCII) sets the type of data stream created for a printer file  
from the data received.  
PAGESIZE(page-length page-width) specifies the length and width of the page used by the  
printer. (This parameter overrides the FORMTYPE parameter.)  
LPI(3|4|6|7.5|8|9) sets the line space setting (lines per inch) on the printer.  
CPI(5|10|12|13.3|15|16.7|18|20) specifies the printer character density, in characters per inch, for  
the printer.  
OVRFLW(overflow-line-number) specifies the line number on the page at which overflow to a  
new page begins.  
FOLD(*NO|*YES) specifies whether entire records are printed when the record length exceeds  
the form width.  
RPLUNPRT(*YES ‘replacement-character’|*NO) specifies whether unprintable characters  
are replaced with printable characters when printed. Also specifies the replacement character.  
ALIGN(*NO|*YES) specifies whether the page must be aligned in the printer before printing is  
started.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sending a Spool File  
79  
CTLCHAR(*NONE|*FCFC) specifies whether the data contains printer control characters.  
CHLVAL(*NORMAL| (channel#1 line#1) ... (channel#12 line#12)) specifies the list of  
channel numbers with their assigned line numbers. Note that CTLCHAR(*FCFC) must be  
specified as a SYSOPTS parameter for this to be a valid parameter.  
FORMFEED(*DEVD|*CONT|*CUT|*AUTOCUT) specifies the form feed attachments used  
by the printer (4214, 5219, and 5553 printers only).  
PRTQLTY(*STD|*DRAFT|*DEVD|*NLQ) specifies the quality of print produced.  
DRAWER(1|2|3|*E1) specifies the source drawer to be used when you use automatic cut-sheet  
feed mode.  
FONT(*CPI|*DEVD|font-identifier) specifies the font identifier to be used for the spooled  
output file.  
CHRID(*DEVD|*SYSVAL| graphic-character-set code-page) specifies the character  
identifier to use for the spooled output file.  
PAGRTT(*DEVD|*COR|0|90|180|270) specifies the degree of rotation (clockwise from the  
edge of the paper first loaded into the printer) of text on each page printed.  
PRTTXT(‘print-text’) specifies a line of text to be printed at the bottom of each page printed.  
Up to 30 characters enclosed in single quotes is specified.  
JUSTIFY(0|50|100) controls the print positions of the characters on the page (in the spooled file)  
so the right margin is regular.  
DUPLEX(*NO|*YES|*TUMBLE) specifies whether the spooled output file is printed on one or  
both sides of the paper.  
SPOOL(*YES|*NO) specifies whether the data is sent to a spooled file prior to printing.  
OUTQ(*JOB|*DEV|library-name/output-queue- name) specifies the output queue for the  
spooled output file created.  
FORMTYPE(form-type) specifies the type of form to use in the printer when the spooled file is  
printed. The PAGESIZE parameter overrides this parameter.  
COPIES(number-of-copies) specifies the number of copies to be printed. Valid values range  
from 1–255.  
MAXRCDS(maximum-records) specifies the maximum number of records that are placed in  
the output queue. Valid values range from 1–500,000.  
FILESEP(number-of-file-separators) specifies the number of blank separator pages to be  
placed between each copy of the file printed.  
HOLD(*YES|*NO) specifies whether the file is to be held on the output queue until released by  
the user.  
SAVE(*YES|*NO) specifies whether the spooled output file is to be saved on the output queue  
once printed.  
OUTPTY(*JOB|output-priority) specifies the scheduling priority of the file on the output  
queue.  
USRDTA(user-data) allows up to 10 characters of data to identify the spooled output file.  
Refer to the IBM Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html for general  
information on SMS support.  
XTRAN( table-name) specifies the translation table to use. The named table object must exist in a  
library that is in the session manager job library list or else the COPY step fails.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
80  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
If the XTRAN keyword is present, then the following related optional keywords can also be used:  
XTRANLSO(so-code) specifies extended translation local shift-out code. This keyword  
specifies the hexadecimal code to use for the local (i5/OS side) shift-out character and overrides  
the default value of 0E. You can specify any two valid hexadecimal digits.  
XTRANLSI(si-code) specifies extended translation local shift-in code. This keyword specifies  
the hexadecimal code to use for the local (i5/OS side) shift-in character and overrides the default  
value of 0F. You can specify any two valid hexadecimal digits.  
XTRANLDATA(MIXED|DBCS) specifies extended translation local data format. This  
keyword specifies the format of the data on the local (i5/OS side) of the COPY.  
MIXED indicates that the data can contain both DBCS and SBCS characters and that SO/SI  
characters are used. MIXED is the default.  
DBCS indicates that the data is pure DBCS characters and that no SO/SI characters are used.  
XTRANPAD(pc) specifies that padding characters are in use. When DBCS data is translated  
from EBCDIC to ASCII, PAD specifies that the SHIFT-OUT and SHIFT-IN characters are  
replaced by a pad character to allow the displacement of fields within a record to remain  
unchanged during translation.  
When DBCS data is translated from ASCII to EBCDIC, PAD specifies that the input ASCII  
DBCS file is in a padded format. The character immediately preceding a DBCS character or  
string is overlaid by the SHIFT-OUT character. The character immediately following a DBCS  
character or string is overlaid with the SHIFT-IN character. This allows the displacement of fields  
within a record to remain unchanged during translation.  
pc is the pad character to be used during EBCDIC to ASCII translation. pc is ignored for  
ASCII to EBCDIC translations.  
If XTRANPAD is not used, the SI/SO characters are stripped from the file when transferring  
from EBCDIC to ASCII, and added to the records when sending from ASCII to EBCIDC.  
The following rules apply to the use of the XTRAN keyword:  
You must specify the XTRAN keyword to use extended translation all others are optional.  
The default for local shift-out is the IBM standard x0E.  
IBM standard xOF is the default for local shift-in.  
The default local data format is MIXED with SO/SI in use XTRAN is not allowed with  
PRECMPR(*YES) or DECMPR(*NO)  
To send a file to an ASCII platform using extended translation, you must specify in the  
TOSYSOPTS that the data type is binary. Refer to the IBM Sterling Connect:Direct Processes  
Web site at http://www.sterlingcommerce.com/documentation/processes/processhome.html for  
platform-specific SYSOPTS parameters.  
To use the XTRAN keyword to receive DBCS data from an ASCII platform, ensure that the  
record length of the file on the i5/OS side of the transfer is large enough to contain the translated  
record.  
The record length of the file on the i5/OS side of the transfer is generally larger than the ASCII  
equivalent. For additional information, refer to Maintaining Extended Translation in the IBM  
Sterling Connect:Direct for i5/OS Installation and Administration Guide  
EXITCMD specifies a command to be executed only if the copy process is successful.  
FAILCMD specifies a command to be executed only if the copy process is not successful.  
CODEPAGE(nnnnn,nnnnn) converts data from one code page to another. The supported  
conversions are identified on the IBM Web site in the V5R1 Information Center, DB2 Universal  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Sending a Spool File  
81  
Database for iSeries SQL Reference, Appendix E. CODEPAGE() on Sterling Connect:Direct for  
i5/OS relates to CODEPAGE() developed for the z/OS system, UNIX, and Microsoft Windows.  
nnnnn identifies the IBM CCSID codepage number to convert from and the IBM CCSID code  
page number to convert to. If the FROM code page or TO code page is locale, the code page for  
the locale where Sterling Connect:Direct is executing is used. For example, if  
fmsysopts(codepage(locale,1208)), then the FROM code page is the code page for the locale and  
the TO code page is UTF-8.  
CCSID(nnnnn) specifies the coded character set ID to use when creating IFS files. If no character set  
ID is specified, the system default is used.  
EORCHAR(xxxx) specifies the two-to four-digit hexadecimal symbol to identify the character to use  
in text files as the end-of-record character, for example, EORCHAR(0A).  
Optional Parameters  
The following parameters are optional. Unless otherwise noted, the parameters apply to all remote node  
environments.  
BLKSIZE(n|*CALC)  
specifies the blocksize value for the source file. This value must be a multiple of the file record size.  
n specifies the block size of the file. This value must be a multiple of the record size. The valid range  
is 1–32720  
*CALC indicates that the blocksize is calculated.  
CHLVAL(*NORMAL| (channel#1 line#1) . . . (channel#12 line#12))  
specifies the list of channel numbers with their assigned line numbers. Note that you must specify  
CTLCHAR(*FCFC) for this to be a valid parameter.  
*NORMAL indicates that channel 1 causes a skip to the next line, and channel 12 causes a skip to the  
overflow line (OVERFLOW parameter). Channels 2–11 cause a space-one-line operation.  
(channel#1 line#1) . . . (channel#12 line#12) specifies channel number and line number. Any  
combination of channel numbers, 1–12, is specified along with a line number to be assigned to that  
channel number. Valid line numbers range from 1–255. If no line number is assigned to a channel  
number and that channel number is found in the data, a default of space-one-line before printing is  
taken. You can specify each channel and line number once.  
CKPTINV(n)  
Number of bytes, from 1K to 2 gigabytes, to send or receive before taking a checkpoint. The format is  
nnnnnnn, nnnnnnK, or nnnnnnM, where K specifies thousands of bytes and M specifies millions of  
bytes. A value of 0 specifies no checkpoint restart Sterling Connect:Direct for i5/OS uses the value  
you specify, rounded up to the nearest record boundary, to determine when to take a checkpoint. If  
you specify a value between 1 and 1023, the value becomes 1024 or 1K.  
A checkpoint interval specified here overrides the system-wide default value in the initialization  
parameters.  
CLASS(n)  
determines the node-to-node session on which a Sterling Connect:Direct operation can execute. The  
CLASS is a number from 1–255. If you do not specify the CLASS parameter, it defaults to the  
number of maximum sessions defined in the communications environment mode description.  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
82  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
COMPRESS (*YES|*NO|X\xx\|C\cc|EXT)  
specifies data compression, which reduces the amount of data transmitted as the file is copied from  
one node to another. The file is automatically decompressed at its destination.  
Note: Compression is CPU-intensive. Its effectiveness is dependent on data and line speed and  
should be used only if it benefits the installation.  
If compression is specified, Sterling Connect:Direct reduces the amount of data transmitted based on  
the following rules:  
Repetitive occurrences (ranging from 2–63) of the primary compression character are  
compressed to one byte.  
Repetitive occurrences (ranging from 3–63) of any other character are compressed to two bytes.  
Specifying the primary compression character is recommended for text data or single-character  
repetitive data. Extended compression generally offers improved compression for all types of data.  
*NO specifies no compression.  
*YES enables compression. If *YES is specified, the default primary compression character is  
PRIMEchar=X\40\ (hex 40=“ ”).  
X\xx\ enables compression, where xx is the hexadecimal representation of the value to be used for the  
primary compression character.  
C\cc\ enables compression, where cc is the character representation of the value to be used for the  
primary compression character.  
EXT specifies that extended compression is used to search for repetitive strings of characters in data  
and compress them to codes that are transmitted and converted back to the original string during  
decompression. It is advantageous to specify this parameter when line transmission speeds are limited,  
CPU is available, and data is repetitive.  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
Determines whether node and Process statement overrides for Cyclic Redundancy Check (CRC) are  
allowed. If this value is set to *OFF, setting overrides for CRC checking will be ignored. The default  
value is *INITPARMS.  
*INITPARMS specifies that the CRC setting is determined by the value for the initialization  
parameter, TCP.CRC.  
*NETMAP specifies that the CRC setting is determined by the value for the NETMAP parameter,  
Cyclic Redundancy Check. The value for the initialization parameter TCP.CRC must be set to *ON  
and the value for the initialization parameter TCP.CRC.OVERRIDE must be set to *YES.  
*OFF specifies that CRC is disabled.  
*ON specifies that CRC is enabled.  
ECTUNING (ecclevel,ecwinsize,ecmlevel)  
ECCLEVEL specifies the extended compression level, which affects how much CPU the extended  
compression routines use. Higher compression levels use more CPU but achieve greater compression.  
The valid values for this subparameter are 1–9, inclusive. The default value is *INITPARMS.  
ECWINSIZE specifies the extended compression window size, which is specifically for the history  
buffer that is filled from the user’s input buffer ( both compressing and decompressing). The window  
specifies the amount of storage designated to maintain data previously read.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sending a Spool File  
83  
This data can be scanned for string matches. The extended compression window size affects how  
much virtual memory the extended compression routines use. Higher window size values use more  
memory but achieve greater compression. The valid values for this subparameter are 8–15, inclusive.  
The default value is *INITPARMS.  
ECMLEVEL specifies the extended compression memory level parameter, which determines how  
much memory should be allocated for other internal data structures like the hash table and the  
previous table (pointers to previous strings starting with the same 3 characters). The extended memory  
level affects how much memory the extended compression routines use. Higher memory levels use  
more virtual memory but achieve greater compression. The valid values for this subparameter are 1–9.  
inclusive. The default value is *INITPARMS.  
CTLCHAR(*NONE|*FCFC|*PRTCTL)  
specifies whether the data contains printer control characters. Valid values are:  
*NONE indicates that the data does not contain printer control characters.  
*FCFC indicates that the first character of each record contains an ANSI forms-control character.  
Any incorrect control characters are ignored, and single spacing is assumed. This parameter should be  
used when the source z/OS file is RECFM=xxA, which indicates it contains ANSI carriage control.  
*PRTCTL indicates that skip and space-before values are in the first four characters of every record.  
These values are useful in high-level language (HLL) programs. Refer to the CPYSPLF command in  
the i5/OS CL Reference for more information on these values.  
FDSNLEN(*SPLF)  
specifies the record length of the local file. The default value *SPLF means: look at the actual spool  
file and use its length in this parameter.  
Note: For TDSN, the values of *LIBL, *CURLIB, QTEMP cannot be used when sending to or  
from an i5/OS system using Sterling Connect:Direct for i5/OS. A specific library name must  
be used for copying from or to a data set on the i5/OS.  
NOTIFY(userid)  
specifies the user ID on the local node to receive status messages that are directed to the message  
queue of the user.  
PLEXCLASS(user-defined class)  
specifies a user-defined class containing up to eight characters associated with a Sterling  
Connect:Direct/Server in a Sterling Connect:Direct/Plex environment. This represents a type of server  
on which you want to run a task, for example TAPE.  
Note: This parameter is for use only in Sterling Connect:Direct for z/OS environments.  
PNAME(name)  
identifies the Sterling Connect:Direct Process in any messages or statistics related to the operator. The  
name is from 1 to 12 characters long. The first character must be alphabetic. Use this name to identify  
the operation in any messages or statistics. The default name is CDSNDSPL.  
Note: Only Sterling Connect:Direct for i5/OS and Sterling Connect:Direct for UNIX support  
Process names with more than 8 characters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
84  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
PNODEID(id, pswd, newpswd)  
specifies security user IDs and passwords at the local node. This parameter should only be used to  
validate security with a different ID than the one you used to sign on to Sterling Connect:Direct.  
PNODEID is not used when both the ID and password match on the local and remote nodes.  
id specifies the security ID passed to the security system on the local node (1–10 alphanumeric  
characters).  
pswd specifies the current security password for the specified ID. This parameter is used by the  
security system on the local node to validate the current security password (1–10 alphanumeric  
characters). This is optional unless the user has security set to require a password.  
newpswd specifies the new security password. It is used by the security system to change the current  
security password to the new security password (1–10 alphanumeric characters).  
Note: Although you can specify a value for newpswd, Sterling Connect:Direct for i5/OS does not  
support this parameter.  
PRTY(n)  
specifies the priority of the operation. High numbers indicate high priorities; low numbers indicate  
low priorities. Use this priority only for selection within CLASS. It does not affect transmission  
priority. The range is from 0–15. The default is *INITPARMS. Type DSPPFM INITPARMS to  
view the default.  
RMTWORK(*YES|*NO)  
specifies whether a remote Process can run on the session after Sterling Connect:Direct for i5/OS has  
completed its Process on the session.  
*YES allows the remote Process to run on the session after Sterling Connect:Direct for i5/OS  
completes its Process.  
*NO terminates the session after Sterling Connect:Direct for i5/OS executes the command function.  
*NO is the default for this parameter.  
SACCT(snode-accounting-data)  
specifies the accounting data for the remote node. The maximum length of the accounting data is 256  
characters. If special characters are part of the accounting data, the string must be enclosed in single  
quotation marks. This parameter is valid for z/OS nodes only.  
SECOPTIONS(* *)  
specifies Encryption and Digital Signature values.  
Encryption specifies if data encryption is to be performed and what algorithm to use.  
Digital Signature specifies if a digital signature is created during file transmission.  
Note: The SECOPTIONS parameter is valid only if Sterling Connect:Direct Secure Plus is  
installed. For information about these parameters, refer to the IBM Sterling Connect:Direct  
Secure Plus for i5/OS Implementation Guide.  
SNODEID(id, pswd, newpswd)  
specifies security user IDs and passwords at the remote node. Use this parameter only to validate  
security with a different ID than the one you used to sign on to Sterling Connect:Direct.  
Note: Parameter values are case sensitive.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Sending a Spool File  
85  
id specifies the security ID sent to the remote node (1–64 alphanumeric characters).  
pswd specifies the current security password and is used by the security system on the SNODE to  
validate the current security password (1–64 alphanumeric characters). This is optional unless the user  
has security set to require a password.  
newpswd specifies the new security password and is used by the security system to change the current  
security password to the new security password (1–64 alphanumeric characters).  
Note: newpswd is not supported if the remote node is an i5/OS node.  
TBUFND(n)  
specifies the number of I/O buffers VSAM uses to transmit data between virtual and auxiliary storage.  
Valid values range from 1–510. The default is 2. Increasing this number generally improves the I/O  
performance on the file but requires more memory. This parameter is valid for z/OS nodes only.  
TDBPARMS(dbid, dbsubid)  
indicates that the Sterling Connect:Direct for z/OS SQL SERVER is to process the I/O request against  
the database identified by the subparameters of this keyword and defined by the SQL= parameter. The  
DBPARMS parameter is used with the optional Sterling Connect:Direct z/OS SQL feature. This  
parameter is valid for z/OS nodes only. Only DB2 is supported.  
To determine the values to code for access to a given DB2 table or set of DB2 tables, consult the  
database administrator.  
dbid specifies the 1–4 byte DB2 database ID.  
dbsubid specifies the 1–4 byte DB2 database sub ID.  
TDCB(modeldcb, blksize, den, dsorg, keylen, limct, lrecl, optcd, recfm, rkp, trtch)  
overrides attributes of the source file. For existing source and destination files, DCB attributes are  
determined from the operating system unless specified. For a new destination file, the DCB attributes  
of the source file are used to allocate the destination file unless DCB information is provided in the  
operation.  
modeldcb specifies a model data set control block (DSCB).  
blksize specifies the block length in bytes. The minimum and maximum lengths are 18 bytes, and  
32,760 bytes.  
den specifies the magnetic tape mode setting. The following table shows values for the DEN  
parameter for 7- and 9-track tapes. When coded together, the DEN and TRTCH values are used to  
select a tape device for allocation by Sterling Connect:Direct z/OS.  
DEN  
7-Track Tape  
9-Track Tape  
1
2
3
4
556 bpi  
--  
800 bpi  
800 bpi  
1600 bpi  
6250 bpi  
--  
--  
dsorg specifies the file organization. Supported file organizations are BDAM, ISAM, PO, PS, and  
VSAM.  
keylen specifies the length of the keys used in a file. Maximum length in bytes is 255.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
86  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
limct specifies the blocks or tracks searched to find a free block or available space.  
lrecl specifies the record length in bytes.  
optcd establishes optional processing associated with a specific file. This optional processing only  
applies to this file and is not automatically applied to other files involved in a RECEIVE operation.  
Valid options are:  
W performs write validity checks on direct access storage devices.  
Q performs ASCII-to-EBCDIC conversion for input files and EBCDIC-to-ASCII conversion for  
output files. Q is the default and only used for AL-labeled tape files.  
Z performs reduced error recovery for tape files.  
recfm specifies the format of the records in the file. You can specify any valid record format, such as:  
F specifies fixed format.  
FA specifies fixed format with ASA printer control.  
FB specifies fixed block format.  
FBA specifies fixed block format with ANSI carriage control.  
FM specifies fixed format with machine code control character.  
U specifies undefined format.  
V specifies variable format.  
VB specifies variable block.  
VBA specifies variable block format with ASA printer control.  
VBM specifies variable block format with machine code control character.  
VS specifies variable spanned format.  
VBS specifies variable block spanned format.  
For FDR volumes, you must specify RECFM=U.  
rkp specifies the position of the first byte of the record key within each logical record. The beginning  
byte of a record is addressed as 0.  
trtch specifies the magnetic tape mode setting. When coded together, the TRTCH and DEN values  
are used to select a tape device for allocation by Sterling Connect:Direct for z/OS. Valid options are:  
C specifies data conversion, odd parity, a4nd no translation.  
E sets no data conversion, even parity, and no translation.  
T specifies no data conversion, odd parity, and BCD or EBCDIC translation.  
ET specifies no data conversion, even parity, and BCD or EBCDIC translation.  
COMP is a feature for 3480X tape drives only. It enables Improved Data Recording Capability  
(IDRC), which compresses the data. This subparameter overrides the system-wide IDRC setting  
for no compression. If you are specifying COMP, you must also include a UNIT= parameter that  
specifies either 3480X or a systems-programmer-defined name equivalent to a 3480X tape drive.  
NOCOMP overrides the system-wide IDRC setting for compression. NOCOMP applies to  
3480X tape drives only.  
TDISP(current, normal end, abnormal end)  
specifies the status of the file on the remote node.  
current specifies the status of the file before the operation executes. Valid choices for this  
subparameter are:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sending a Spool File  
87  
NEW specifies that the operation creates the destination member for an existing file. NEW is the  
default. The file is created if the member does not exist. The file cannot be created if the member  
already exists.  
OLD specifies that the destination member already exists. The operation has exclusive control of  
the member.  
MOD specifies that the operation modifies the member by adding data to the end of the member  
or, if none exists, allocates a new member. The file is also created if it does not exist.  
RPL specifies that the destination member replaces any existing member or, if none exists,  
allocates a new member. The file is created if it does not exist.  
SHR specifies that the destination member already exists. The file is read simultaneously by  
another job or operation.  
Note: Normal and abnormal second disposition are not applicable when sending to Sterling  
Connect:Direct for i5/OS.  
For information on parameters for other platforms, refer to the appropriate volume of the IBM  
Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html.  
TIOEXIT(program-name)  
specifies the name of the user-written program to be given control for I/O-related requests for the  
associated data. This parameter is valid for z/OS nodes only.  
TIOPARM(parameter-name)  
establishes a parameter, or list of parameters, to be passed to the specified exit. The TIOPARM syntax  
is dependent on the parameter list required by the program specified in TIOEXIT. This parameter is  
valid for z/OS nodes only.  
TLABEL(seqno,labeltype,pswdread,inout,retpd,expdt)  
specifies label information for the tape. This parameter is valid for z/OS nodes only.  
seqno specifies the relative file position on the tape.  
labeltype is designated as:  
SL specifies IBM standard labels.  
AL specifies American National Standard labels.  
BLP specifies bypass label processing.  
LTM specifies bypass leading tape marks.  
NL specifies no labels.  
pswdread specifies that a password must be given by the operator or user before the file is accessed.  
inout specifies that a BSAM data set opened for INOUT or a BDAM data set opened for UPDAT is to  
be read only.  
retpd specifies the retention period for the data set in days, where nnnn is 1–4 digits.  
expdt specifies the expiration date for the data set, where yyddd or yyyyddd is a valid Julian date.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
88  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
TLINK(vmid,pwd,accmode,cuu)  
specifies the disk where the CMS file is located. This parameter allows the user to access the CMS  
file. This parameter is valid for VM or VSE nodes only.  
vmid specifies the owner ID for the CMS minidisk where the file is located. The valid length ranges  
from 1–8 characters.  
pwd specifies the appropriate password for the CMS minidisk where the file is located. The maximum  
length is 256 characters. The default password is ALL.  
accmode specifies the link access mode.  
When used with the FROM parameter, the access modes are W (primary read/write access), M  
(primary multiple access), R (primary read only), RR (primary and secondary read only access), WR  
(primary read/write access; alternate read only access), MR (primary multiple access; alternate read  
only access), and MW (primary multiple access; alternate read/write only access).  
When used with the TO parameter, the access modes are W, M, and MW.  
cuu specifies the virtual address of the disk where the CMS file is located. Any three-digit number is  
valid.  
TMSVGP(n)  
specifies the remote file mass storage volume group that resides on a mass storage system (MSS)  
device, which must be a valid DD (data definition) name. This parameter is valid for z/OS nodes only.  
TPROTCT(*YES|*NO)  
specifies whether an IBM RACF profile is created for a new file on a remote VM system.  
TRACEOPT  
Trace Instructions  
(L, S, F, C, X, K, D, H, V, W, P,|*NONE|*ALL|*EXT| *COMMON|*INITPARMS|*CURRENT  
specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The  
following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the communications logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
W enables the communications dump.  
P enables the CIPC dump.  
*NONE turns off all traces.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)  
*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).  
*COMMON enables the communications traces. (L, S, F, C, and H)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Sending a Spool File  
89  
*INITPARMS indicates the traces specified in the initialization parameters.  
*CURRENT selects the trace bits that the session manager is currently using.  
Command Trace Options  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON| *NONE)  
specifies the trace bits that define functions to be traced for this command but not for the Process it  
runs. The following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the common logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
P enables the CIPC dump.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, and P)  
*EXT enables all product traces plus two other traces. (TRCICF and TRCJOB)  
*COMMON enables the most commonly used traces. (L, S, F, C, and H)  
*NONE turns off all traces.  
TSPACE(avgblk, type, primary, secondary, pdsblk, rlse, contig, round)  
specifies the amount of storage to be allocated for new files on the destination node. If TSPACE is  
specified, the DISP of the destination file must be NEW. If TSPACE is not specified and the DISP is  
NEW, space allocation defaults to the value obtained from the source file (unless a TTYPE has been  
specified). The default allocation is in blocks, and if supplied with the ROUND option, provides  
device-independent space allocation. This parameter is valid only for z/OS nodes.  
avgblk defines the average block size.  
type defines the space allocation. Valid values are:  
CYL specifies that space is to be allocated by cylinder.  
TRK specifies that space is to be allocated by track.  
blk specifies that space is to be allocated by the average block length of the data and is the  
default. The system computes the number of tracks to be allocated. If the subparameter ROUND  
is also specified, the system allocates the space in cylinders. ROUND is preferred because  
allocation is performed on cylinders in a device-independent manner. If no space information is  
coded, allocation is in blocks, due to device dependencies.  
primary specifies the primary allocation of storage (number of units).  
secondary specifies the secondary allocation of storage (number of units).  
pdsblk specifies the number of PDS directory blocks to be created in the file.  
rlse sets the release of unused storage allocated to the output file. Valid values are *YES and *NO.  
contig specifies the contiguous storage for the primary allocation. Valid values are *YES and *NO.  
round specifies the rounding of storage allocated by average block length to an integral number of  
cylinders. Valid values are *YES and *NO.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
90  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
TSQL(sql-statement|DSN=data-set-name)  
defines the SQL statement to be processed against the database identified by the DBPARMS  
parameter or the DSN containing the SQL statements(s). The SQL parameter is used with the optional  
Sterling Connect:Direct SQL feature. This parameter is valid for z/OS nodes only.  
sql-statement defines the actual SQL statement to be processed.  
data-set-name specifies the data set containing the SQL statement or statements to be processed.  
TTYPE(name)  
specifies the entry name of the type defaults file on the remote node that contains the default file  
attributes used to allocate the destination file. TTYPE is required only if sending to a MS-DOS node.  
TUNIT(unit-name)  
specifies the unit address, device type, or user-assigned group name where the file resides or will  
reside. For SAM-to-SAM copies where the destination file is new and the UNIT parameter is not  
coded, the device type from the source file is used. For VSE nodes, you must specify either this  
parameter or TVOL.  
Specify a unit-count to allow additional units to be allocated if required, or specify P to allocate the  
same number of units as volumes and then parallel mount the volumes.  
TVOL(*YES|*NO)  
specifies the volume serial number(s) containing the file and optional processing associated with the  
file. If TVOL is not specified, the file must be cataloged. For VSE nodes, you must specify either this  
parameter or TUNIT.  
private specifies allocation of an output file only if the volume is specifically requested and is used  
for direct access storage devices only. Valid values are *YES and *NO.  
volcount specifies the maximum number of volumes required by an output file.  
ser identifies by serial number the volumes where the output file resides or will reside.  
TVOLREF(data-set-name)  
allows you to place a data set on the same volume as the referenced data set. It must be cataloged on  
the system where it is referenced. This parameter is valid for z/OS nodes only.  
TVSAMCAT(dsn,vmid,pwd,accmode,cuu)  
specifies the catalog for the VSAM file to be copied. This parameter is required only if using a catalog  
other than the master catalog. This parameter is valid for VSE nodes only.  
dsn specifies the filename of the VSAM catalog containing the file to be copied. The maximum length  
is 44 characters.  
vmid specifies the owner ID for the VSAM minidisk where the file is located. The maximum length is  
eight characters.  
pwd specifies the appropriate password for the VSAM minidisk where the file is located. The  
maximum length is eight characters.  
accmode specifies the link access mode. Valid access modes are NULL, W (primary read/write  
access), M (primary multiple access), and MW (primary multiple access; alternate read/write only  
access).  
cuu specifies the virtual address of the disk where the VSAM file is located. Any three-digit number  
is valid.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Sending a Spool File  
91  
Sending a Spooled File to a Remote Node  
Use the Sterling Connect:Direct Send Spool (CDSNDSPL) screens to send a spooled file to a remote node.  
Complete the following steps to send a spooled file to a remote node:  
1. Access the CDSNDSPL screens by typing CDSNDSPL at the command line and pressing F4 or by  
choosing the send spooled file option from the Sterling Connect:Direct main menu.  
2. Type the remote node name and press Enter. The command retrieves the remote node environment and  
display fields for required parameters.  
3. Type values for required and any optional parameters as appropriate and press Enter.  
The following is a sample of the Sterling Connect:Direct Send Spool (CDSNDSPL) screen.  
Connect:Direct Send Spool File (CDSNDSPL)  
Type choices, press Enter.  
Receiving Node Name . . . . . .  
Receiving Node Environment . . .  
Spooled file . . . . . . . . . .  
Job name:  
__________________  
__________  
__________  
AS400, MSP, MVS, OS/400...  
Name  
__________  
__________  
_____  
Name, *  
Name  
000000-999999  
1-9999, *ONLY, *LAST  
User Id . . . . . . . . . . .  
Number . . . . . . . . . . . .  
Spooled file number . . . . . .  
_____  
Receiving File Name . . . . . . __________________________________________________  
____________________________________  
Bottom  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F13=How to use this display  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
92  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6  
Running a Remote Task  
This chapter describes the Sterling Connect:Direct Run Task (CDRUNTASK) command and its function.  
Using the CDRUNTASK Command  
Use the CDRUNTASK command to run a task at a remote node. This command allows user programs, or  
subtasks, to be attached and run as a subtask under the remote Sterling Connect:Direct during command  
execution.  
For additional information, refer to the appropriate RUN TASK section of the IBM Sterling Connect:Direct  
Processes Web site at http://www.sterlingcommerce.com/documentation/processes/processhome.html for  
information about the remote node.  
Note: RUN JOB and RUN TASK Process statements use the authenticated user’s JOBD for the library list  
and not the CDJOBD library list, which is the CDADMIN job description used to start Sterling  
Connect:Direct. RUN JOB and RUN TASK Process statements use the CDJOBQ job queue.  
CDRUNTASK Command Example  
The command shown in the following figure is an example of the CDRUNTASK command.  
CDRUNTASK  
PNAME(CDTASK) SNODE(DALLAS.OS3901)  
SNODENVIRN(OS390) PGM(ACCTUPDT)  
PARM(’’CL44’DALLAS.ACCTDATA’’ CL44’  
’DALLAS.REPORT’’’)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
94  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
CDRUNTASK Example With New TraceOpt Parameters  
===> CDRUNTASK SNODE(CDDV3600) SNODENVIRN(AS400)  
CMD('WRKACTJOB SBS(CDDV3600) OUTPUT(*PRINT)') TRACEOPT(*ALL *ALL)  
SNODEID(RMTUSER ())  
The associated Statistics record:  
Display Spooled File  
File . . . . . :  
Control . . . . .  
Find . . . . . .  
CDSELSTAT  
Page/Line  
1/6  
Columns  
1 - 130  
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....  
C:D i5 Select Statistics (CDSELSTAT) Detail 03/16/04 11:03:12  
Page 0001  
------------------------------------------------------------------------------------  
Event: Communications Session Started (SMSES)  
Process Name: CDTASK  
Process Number: 00014891  
Local User: LCLUSER  
Type: INIT  
Date/Time:  
Local Node:  
Remote Node:  
Protocol:  
03/16/04  
10:57:12  
CDDV3600  
CDDV3600  
TCPIP  
Message Id:  
ASMT292I  
------------------------------------------------------------------------------------  
Event: Process Started (SMPST)  
Process Name: CDTASK  
Process Number: 00014891  
Local User: RMTUSER  
Pnode: N  
Date/Time:  
03/16/04  
10:57:12  
Local Node:  
Remote Node:  
Submit User:  
CDDV3600  
CDDV3600  
CDDV3600  
------------------------------------------------------------------------------------  
Event: Process Started (SMPST)  
Process Name: CDTASK  
Process Number: 00014891  
Local User: LCLUSER  
Pnode: Y  
Date/Time:  
03/16/04  
10:57:13  
Local Node:  
Remote Node:  
Submit User:  
CDDV3600  
CDDV3600  
IDEVUSER  
CDRUNTASK Command Format  
The following are the parameters for the CDRUNTASK command. Required parameters are in bold.  
Command  
Parameters  
CDRUNTASK  
SNODE(remote-node-name)  
SNODENVIRN(remote-environment-name)  
PGM(program-name)  
CMD(command)  
CLASS(n)  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
NOTIFY(userid)  
‡‡PARM(parameters)  
For tasks on z/OS, Microsoft Windows, HP NonStop, VM, and VSE  
For tasks on i5/OS, Microsoft Windows, OpenVMS, UNIX, Stratus VOS  
‡‡ For tasks on z/OS, HP NonStop, VM, and VSE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Running a Remote Task  
95  
Command  
Parameters  
PLEXCLASS(user-defined class)  
PNAME(name)  
PNODEID(id, pswd, newpswd)  
RMTWORK(*YES|*NO)  
SACCT(snode-accounting-data)  
SNODEID(id, pswd, newpswd)  
TRACEOPT  
Trace Instructions:  
(L,S,F,C,X,K,D,H,V,W,P|*NONE|*ALL|*EXT|  
*COMMON|*INITPARMS|*CURRENT  
Command Trace Options:  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON|  
*NONE)  
For tasks on z/OS, Microsoft Windows, HP NonStop, VM, and VSE  
For tasks on i5/OS, Microsoft Windows, OpenVMS, UNIX, Stratus VOS  
‡‡ For tasks on z/OS, HP NonStop, VM, and VSE  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
Required Parameters  
The following two parameters are required when you use the CDRUNTASK command.  
SNODE(remote-node-name)  
specifies a 1–16 character alphanumeric name for the remote node.  
Note: This value is case sensitive.  
SNODENVIRN(remote-environment-name)  
specifies the remote environment to execute the task.  
One of the next two parameters is required for the CDRUNTASK command. Each parameter lists the  
environments for which they apply.  
PGM(program-name)  
specifies the RUN TASK program name on the remote node. The following environments can use this  
parameter: OS/390, Microsoft Windows, Tandem, VM, and VSE  
CMD(command)  
specifies batch-capable i5/OS CL commands and parameters for a remote node. The maximum  
number of permitted characters is 256. The following environments can use this parameter: i5/OS,  
MS-DOS, Microsoft Windows, OpenVMS, UNIX, and Stratus VOS.  
Refer to the IBM Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html for parameter values for the  
remote node.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
96  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Optional Parameters  
The following parameters are optional. Unless otherwise noted, the parameters apply to all remote node  
environments.  
CLASS(n)  
determines the node-to-node session on which a Sterling Connect:Direct operation can execute. The  
CLASS is a number from 1–255. If you do not specify the CLASS parameter, it defaults to the  
maximum number of sessions defined in the mode description for the communications environment.  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
Determines whether node and Process statement overrides for Cyclic Redundancy Check (CRC) are  
allowed. If this value is set to *OFF, setting overrides for CRC checking will be ignored. The default  
value is *INITPARMS.  
*INITPARMS specifies that the CRC setting is determined by the value for the initialization  
parameter TCP.CRC.  
*NETMAP specifies that the CRC setting is determined by the value for the NETMAP parameter,  
Cyclic Redundancy Check. The value for the initialization parameter TCP.CRC must be set to *ON  
and the value for the initialization parameter TCP.CRC.OVERRIDE must be set to *YES.  
*OFF specifies that CRC is disabled.  
*ON specifies that CRC is enabled.  
NOTIFY(userid)  
specifies the user ID on the local node to receive status messages that are directed to the message  
queue of the user.  
PARM(parameters)  
specifies the remote parameters needed for the program specified in the PGM parameter. This  
parameter is valid for tasks on z/OS, HP NonStop, VM, and VSE.  
PLEXCLASS(user-defined class)  
specifies a user-defined class containing up to eight characters associated with a Sterling  
Connect:Direct/Server in a Sterling Connect:Direct/Plex environment. This represents a type of server  
on which you want to run a task.  
Note: This parameter is for use only in Sterling Connect:Direct for z/OS environments.  
PNAME(name)  
identifies the Sterling Connect:Direct Process in any messages or statistics. The name is from 1 to 12  
characters long. The first character must be alphabetic. The default name is CDSND.  
Note: Only Sterling Connect:Direct for i5/OS and Sterling Connect:Direct for UNIX support  
Process names with more than 8 characters.  
PNODEID(id, pswd, newpswd)  
specifies security user IDs and passwords at the local node. Only use this parameter to validate  
security with a different ID than the one you used to sign on to Sterling Connect:Direct.  
id specifies the security ID passed to the security system at the local node (1–10 alphanumeric  
characters).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Running a Remote Task  
97  
pswd specifies the current security password for the specified ID. The security system at the local  
node can use this parameter to validate the current security password (1–10 alphanumeric characters).  
This is optional unless the user has security set to require a password.  
newpswd specifies the new security password. The security system can use this parameter to change  
the current security password to the new security password (1–10 alphanumeric characters).  
Note: Although you can specify a value for the new password, Sterling Connect:Direct for i5/OS  
does not currently support this parameter.  
RMTWORK(*YES|*NO)  
specifies whether a remote Process can run on the session after Sterling Connect:Direct for i5/OS has  
completed its Process on the session.  
*YES allows a remote Process to run on the session after the Sterling Connect:Direct for i5/OS  
completes its Process.  
*NO terminates the session after Sterling Connect:Direct for i5/OS executes the command function.  
*NO is the default.  
SACCT(snode-accounting-data)  
specifies the accounting data for the remote node. The maximum length of the accounting data is 256  
characters. If special characters are part of the accounting data, the string must be enclosed in single  
quotation marks.  
SNODEID(id, pswd, newpswd)  
specifies security user IDs and passwords at the remote node. This parameter should only be used to  
validate security with a different ID than the one you used to sign on to Sterling Connect:Direct.  
id specifies the security ID passed to the security system on the remote node (1–64 alphanumeric  
characters).  
pswd specifies the current security password and is used by the security system on the SNODE to  
validate the current security password (1–64 alphanumeric characters). This parameter is optional  
unless the user has security set to require a password.  
newpswd specifies the new security password and is used by the security system to change the current  
security password to the new security password (1–64 alphanumeric characters).  
Note: newpswd is not valid if the remote node is a Sterling Connect:Direct for i5/OS node.  
Parameter values are case sensitive.  
TRACEOPT  
Trace Instructions  
(L, S, F, C, X, K, D, H, V, W, P,|*NONE|*ALL|*EXT| *COMMON|*INITPARMS|*CURRENT  
specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The  
following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the communications logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
98  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
H enables the FMH dump.  
V enables the XDR dump.  
W enables the communications dump.  
P enables the CIPC dump.  
*NONE turns off all traces.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)  
*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).  
*COMMON enables the communications traces. (L, S, F, C, and H)  
*INITPARMS indicates the traces specified in the initialization parameters.  
*CURRENT selects the trace bits that the session manager is currently using.  
Command Trace Options  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON| *NONE)  
specifies the trace bits that define functions to be traced for this command but not for the Process it  
runs. The following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the common logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
P enables the CIPC dump.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, and P)  
*EXT enables all product traces plus two other traces. (TRCICF and TRCJOB)  
*COMMON enables the most commonly used traces. (L, S, F, C, and H)  
*NONE turns off all traces.  
Using the CDRUNTASK Screens  
Use the Sterling Connect:Direct Run Task (CDRUNTASK) screen to initiate a task on the remote node.  
Initiating a Task on a Remote Node  
Complete the following steps to initiate a task on a remote node:  
1. Access the CDRUNTASK screen by typing CDRUNTASK at the command line and pressing F4 or by  
selecting the Run Task option from the main menu.  
2. Type the remote node name at the command prompt and press Enter. The command retrieves the remote  
node environment and display fields for required parameters.  
3. Type values for required and optional parameters as appropriate, and press Enter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Running a Remote Task  
99  
The following figure shows a sample of the first screen in the Sterling Connect:Direct Run Task  
(CDRUNTASK) screen flow for a Sterling Connect:Direct for i5/OS remote environment.  
Connect:Direct Run Task (CDRUNTASK)  
Type choices, press Enter.  
Remote Node Name . . . . . . . . > DALLAS____________  
Remote Environment . . . . . . . > OS/400____  
AS400, MVS, OS390, OS/400...  
Remote Task Command . . . . . . __________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
CRC . . . . . . . . . . . . . .  
Trace Options:  
*INITPARMS  
*INITPARMS, *NETMAP, *ON, *OFF  
Trace Instructions . . . . . .  
Command trace options . . . .  
Process Name . . . . . . . . . .  
Local Node User Info.:  
*CURRENT_________________  
*NONE____________________  
CDTASK______ Name  
User Id . . . . . . . . . . .  
Password . . . . . . . . . . .  
New Password . . . . . . . . .  
User to Notify . . . . . . . . .  
*CURRENT___  
Character value, *CURRENT  
Character value  
Character value  
Name, *CURRENT, *NONE  
More...  
F13=How to use this display  
*CURRENT___  
F12=Cancel  
F3=Exit  
F4=Prompt  
F5=Refresh  
F24=More keys  
Additional screens vary according to the remote node environment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
100  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7  
Submitting a Sterling Connect:Direct Process  
on a Remote Node  
This chapter describes the Sterling Connect:Direct Submit (CDSUBMIT) command and its function. This  
chapter also shows sample CDSUBMIT screens and describes the CL parameters used for the CDSUBMIT  
command.  
Using the CDSUBMIT Command  
Use the CDSUBMIT command to submit a Sterling Connect:Direct Process on a remote node. This command  
allows you to perform the following tasks:  
Initiate a session with a remote node  
Submit a Process to the remote Sterling Connect:Direct  
Override certain parameters of the submitted Process  
The remote node must support the Sterling Connect:Direct Process language.  
Note: The Process to be submitted must exist on the remote system.  
CDSUBMIT Command Example  
The following example presents a sample of the CDSUBMIT command.  
CDSUBMIT SNODE(OS390.V20100) SNODENVIRN(OS390) PROCFILE(file1.tst) PNAME(CDSUBOS390)  
CDSUBMIT Command Format  
The following are the parameters for the CDSUBMIT command. Required parameters are in bold.  
Command  
Parameters  
CDSUBMIT  
SNODE(remote-node-name)  
SNODENVIRN(remote-environment-name)  
These parameters override the associated parameters of the remote Sterling Connect:Direct Process.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
102  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Command  
Parameters  
PROCFILE(file-name)  
CLASS(n|*MODED)  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
NEWNAME(file-name|*NONE)  
NOTIFY(*CURRENT|*NONE|userid)  
PCLASS(n)  
PHOLD(*YES|*NO|*CALL)  
PLEXCLASS(user-defined class)  
PNAME(process-name)  
PNODEID(id,pswd,newpswd)  
PNOTIFY(userid)  
PPACCT(PNODE accounting-data)  
PPNODEID(id,pswd,newpswd)  
PPRTY(n)  
PREQUEUE(*YES|*NO)  
PRETAIN(*YES|*NO|*INITIAL)  
PSACCT(SNODE accounting-data)  
PSNODE(secondary-node-name)  
PSNODEID(id,pswd,newpswd)  
PSTARTT(day|date,time)  
PSYMBOLS(&symbolic n = variable n)  
RMTWORK(*YES|*NO)  
SACCT(SNODE accounting-data)  
SNODEID(id,pswd,newpswd)  
TRACEOPT  
Trace Instructions:  
(L,S,F,C,X,K,D,H,V,W,P|*NONE|*ALL|*EXT|  
*COMMON|*INITPARMS|*CURRENT  
Command Trace Options:  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON|  
*NONE)  
These parameters override the associated parameters of the remote Sterling Connect:Direct Process.  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
Required Parameters  
The following parameters are required. Unless otherwise noted, the parameters apply to all remote node  
environments.  
SNODE(remote-node-name)  
specifies a 1–16 character alphanumeric name for the remote node.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Submitting a Sterling Connect:Direct Process on a Remote Node  
103  
SNODENVIRN(remote-environment-name)  
specifies the remote node environment.  
PROCFILE(file-name)  
specifies the name of the file or member that contains the Sterling Connect:Direct Process to be  
submitted. This file must already exist on the node where the Sterling Connect:Direct Process is to be  
submitted.  
For information about parameters for the remote node, refer to the IBM Sterling Connect:Direct Processes Web  
site at http://www.sterlingcommerce.com/documentation/processes/processhome.html.  
Optional Parameters  
The following parameters are optional. Unless otherwise noted, the parameters apply to all remote node  
environments.  
CLASS(n|*MODED)  
determines the node-to-node session on which an operation can execute. The CLASS is a number  
from 1–255. If you do not specify the CLASS parameter, it defaults to the number of maximum  
sessions defined in the mode description for the communications environment.  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
*MODED uses the class value specified for the destination node.  
CRC(*INITPARMS|*NETMAP|*OFF|*ON)  
Determines whether node and process statement overrides for Cyclic Redundancy Check (CRC) are  
allowed. If this value is set to *OFF, setting overrides for CRC checking will be ignored. The default  
value is *INITPARMS.  
*INITPARMS specifies that the CRC setting is determined by the value for the initialization  
parameter TCP.CRC.  
*NETMAP specifies that the CRC setting is determined by the value for the NETMAP parameter,  
Cyclic Redundancy Check. The value for the initialization parameter TCP.CRC must be set to *ON  
and the value for the initialization parameter TCP.CRC.OVERRIDE must be set to *YES.  
*OFF specifies that CRC is disabled.  
*ON specifies that CRC is enabled.  
NEWNAME(file-name|*NONE)  
specifies a new name to be given to the submitted Process on the remote system. This name overrides  
the name in the Process file.  
file-name specifies the name for the submitted Process on the remote system.  
*NONE uses the name specified in the Process.  
NOTIFY(*CURRENT|*NONE|userid)  
specifies the user ID on the receiving node to receive status messages that are directed to the message  
queue of the user.  
*CURRENT uses the ID of the current user.  
*NONE indicates that no user receives the messages.  
userid specifies the name of the user to receive the status messages.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
104  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
PCLASS(n)  
specifies the Sterling Connect:Direct Process CLASS for the submitted remote Process. This entry  
overrides the class specified in the Process.  
PHOLD(*YES|*NO|*CALL)  
specifies whether the submitted remote Process is placed in the hold queue at submission. The default  
is the HOLD value of the Process.  
*YES specifies that the Process submits to the hold queue.  
*NO specifies that the Process executes as soon as possible.  
*CALL specifies that the remote Process is placed in the hold queue until a session is established with  
its SNODE.  
PLEXCLASS(user-defined class)  
specifies a user-defined class containing up to eight characters associated with a Sterling  
Connect:Direct/Server in a Sterling Connect:Direct/Plex environment. This represents a type of server  
on which you want to submit a Sterling Connect:Direct Process.  
Note: This parameter is for use only in Sterling Connect:Direct for z/OS environments.  
PNAME(process-name)  
identifies the Process in any messages or statistics. The name is from 1 to 12 characters long. The first  
character must be alphabetic. The default name is CDSND.  
Note: Only Sterling Connect:Direct for i5/OS and Sterling Connect:Direct for UNIX support  
Process names with more than 8 characters.  
PNODEID(id, pswd, newpswd)  
specifies security user IDs and passwords at the local node. Use this parameter only to validate  
security with a different ID than the one you used to sign on to Sterling Connect:Direct. Do not use  
PNODEID when both the ID and password match on the local and remote nodes.  
id specifies the security ID passed to the security system at the local node (1–10 alphanumeric  
characters).  
pswd specifies the current security password for the specified ID. The security system at the local  
node can use this parameter to validate the current security password (1–10 alphanumeric characters).  
This is optional unless the user has security set to require a password.  
newpswd specifies the new security password.  
Note: Although you can specify a value for newpswd, Sterling Connect:Direct for i5/OS does not  
support this parameter.  
PNOTIFY(userid)  
specifies the user who is to receive remote Process completion messages. This entry overrides the one  
specified in the Process.  
PPACCT(PNODE accounting-data)  
specifies the accounting data for the PNODE in the submitted remote Process. This entry overrides the  
one specified in the Process.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Submitting a Sterling Connect:Direct Process on a Remote Node  
105  
PPNODEID(id,pswd,newpswd)  
specifies the primary node user ID and password for the submitted remote Process. This entry  
overrides the one specified in the Process.  
Note: Parameter values are case sensitive.  
PPRTY(n)  
specifies the Sterling Connect:Direct priority class for the submitted remote Process. This entry  
overrides the one specified in the Process. The valid range is 0–15.  
PREQUEUE(*YES|*NO)  
specifies whether a copy step should be requeued with HE status after an abnormal termination. This  
parameter is only valid when checkpointing.  
PRETAIN(*YES|*NO|*INITIAL)  
tells Sterling Connect:Direct for i5/OS to keep a copy of the remote Process in the hold queue of the  
remote node after the Process executes.  
*INITIAL specifies that the Process executes each time the remote Sterling Connect:Direct is  
initialized.  
PSACCT(SNODE accounting-data)  
specifies the accounting data for the remote node in the remote submitted Process. This entry  
overrides the one specified in the Process.  
PSNODE(secondary node-name)  
specifies the secondary node for the submitted remote Process. This entry overrides the one specified  
in the submitted remote Process.  
PSNODEID(id,pswd,newpswd)  
specifies the secondary node user ID and password for the submitted remote Process. This entry  
overrides the one specified in the Process.  
Note: Parameter values are case sensitive.  
PSTARTT(day|date,time)  
specifies the day or date and time the submitted remote Process is to execute. The date format must be  
specified as the format expected by the remote node. The time field is 10 characters in length and the  
date field is 9 characters in length.  
PSYMBOLS(&symbolic n = variable n)  
specifies values to be used for symbolic substitution in the submitted remote Process.  
RMTWORK(*YES|*NO)  
specifies whether a remote Process can run on the session after Sterling Connect:Direct for i5/OS has  
completed its Process on the session.  
*YES allows a remote Process to run on the session after the Sterling Connect:Direct for i5/OS  
completes its Process.  
*NO terminates the session after Sterling Connect:Direct for i5/OS executes the command function.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
106  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
SACCT(SNODE accounting-data)  
specifies the accounting data for the remote node. The maximum length of the accounting data is 256  
characters. If special characters are part of the accounting data, the string must be enclosed in single  
quotation marks.  
SNODEID(id,pswd,newpswd)  
specifies security user IDs and passwords at the remote node. This parameter should only be used to  
validate security with a different user ID than the one you used to sign on to Sterling Connect:Direct.  
id specifies the security user ID passed to the security system on the remote node (1–64 alphanumeric  
characters).  
pswd specifies the current security password on the remote node and is used by the security system on  
the remote node to validate the current security password (1–64 alphanumeric characters). This is  
optional unless the user has security set to require a password.  
newpswd specifies the new security password and is used by the security system to change the current  
security password to the new security password (1–64 alphanumeric characters).  
Note: Sterling Connect:Direct for i5/OS does not support newpswd if the remote node is an i5/OS  
node. Parameter values are case sensitive.  
TRACEOPT  
Trace Instructions  
(L, S, F, C, X, K, D, H, V, W, P,|*NONE|*ALL|*EXT| *COMMON|*INITPARMS|*CURRENT  
specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The  
following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the communications logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
W enables the communications dump.  
P enables the CIPC dump.  
*NONE turns off all traces.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)  
*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).  
*COMMON enables the communications traces. (L, S, F, C, and H)  
*INITPARMS indicates the traces specified in the initialization parameters.  
*CURRENT selects the trace bits that the session manager is currently using.  
Command Trace Options  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON| *NONE)  
specifies the trace bits that define functions to be traced for this command but not for the Process it  
runs. The following are valid options:  
L enables the main line logic trace for all components.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Submitting a Sterling Connect:Direct Process on a Remote Node  
107  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the common logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
P enables the CIPC dump.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, and P)  
*EXT enables all product traces plus two other traces. (TRCICF and TRCJOB)  
*COMMON enables the most commonly used traces. (L, S, F, C, and H)  
*NONE turns off all traces.  
Using the CDSUBMIT Screens  
Use the CDSUBMIT screens to submit a Sterling Connect:Direct Process on a remote node.  
Submitting a Process on a Remote Node  
Complete the following steps to submit a Process on a remote node:  
1. Access the CDSUBMIT screens by typing CDSUBMIT at the command line and pressing F4 or by  
selecting the SUBMIT option from the main menu.  
2. Type the remote node name at the command prompt and press Enter. The command retrieves the remote  
node environment and display fields for required parameters.  
3. Type values for required and optional parameters as appropriate and press Enter. Additional screens  
relative to the remote environment are displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
108  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Sterling Connect:Direct Submit Primary Screen  
The following is a sample of the first screen in the Sterling Connect:Direct Submit (CDSUBMIT) screen  
flow.  
Connect:Direct Submit (CDSUBMIT)  
Type choices, press Enter.  
Remote Node Name . . . . . . . . > MVS.LEVEL1________  
Remote Environment . . . . . . . > OS/390___  
MVS, OS390, MSP, VSE, VM...  
Remote process file name . . . .  
___________________________________  
CRC . . . . . . . . . . . . . .  
Trace Options:  
'KMOOR1.AS400.CNT($BOTH)'_____________________  
*INITPARMS  
*INITPARMS, *NETMAP, *ON, *OFF  
Trace Instructions . . . . . .  
Command trace options . . . .  
Process Name . . . . . . . . . .  
Local Node User Info.:  
*CURRENT_________________  
*NONE____________________  
CDSUBMIT___  
Name  
User Id . . . . . . . . . . .  
Password . . . . . . . . . . .  
New Password . . . . . . . . .  
User to Notify . . . . . . . . .  
*CURRENT__  
Character value, *CURRENT  
Character value  
Character value  
*CURRENT__  
F12=Cancel  
Name, *CURRENT, *NONE  
More...  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 8  
Submitting a Job on a Remote Node  
This chapter describes the Sterling Connect:Direct Run Job (CDRUNJOB) command and its function. This  
chapter also shows sample CDRUNJOB screens and describes the required and optional CL parameters for the  
CDRUNJOB command.  
Using the CDRUNJOB Command  
Use the CDRUNJOB command to submit a job on the remote node. The job can be:  
A CL command that is submitted on a remote i5/OS node.  
JCL that is submitted by the remote Sterling Connect:Direct for z/OS, VM, or VSE to the z/OS, VM, or  
VSE system.  
A UNIX command or program that is submitted by Sterling Connect:Direct for Microsoft Windows, or  
UNIX to Microsoft Windows, or UNIX node.  
An OpenVMS command or program to submit a job on the OpenVMS node.  
The command, JCL, or program must exist on the remote system before you submit it with CDRUNJOB.  
Note: RUN JOB and RUN TASK Process statements use the authenticated user’s JOBD for the library list  
and not the CDJOBD library list, which is the CDADMIN job description used to start Sterling  
Connect:Direct. RUN JOB and RUN TASK Process statements use the CDJOBQ job queue.  
CDRUNJOB Command Example  
The command shown in the following figure is an example of the CDRUNJOB command.  
CDRUNJOB  
SNODE(DALLAS.OS3901) SNODENVIRN(OS390)  
JOBFILE(’USER1.AS400.CNTL(IEFBR14)’)  
SNODEID(USERID PASSWORD)  
For additional examples, refer to the IBM Sterling Connect:Direct Process Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
110  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
CDRUNJOB Command Format  
The following are the parameters for the CDRUNJOB command. Required parameters are in bold.  
Command  
Parameters  
CDRUNJOB  
SNODE(node-name)  
SNODENVIRN(environment-name)  
BATCHID(idname)  
CLASS(n)  
CRC(*INITPARMS|I*NETMAP|N*OFF|F*ON|O)  
JOBFILE(filename)  
LINK(CMS-file-information  
NOTIFY(userid)  
PLEXCLASS(user-defined class)  
PNAME(name)  
PNODEID(userid,pswd,newpswd)  
RMTWORK(*YES|*NO)  
SACCT(SNODE accounting-data)  
SNODEID(userid,pswd,newpswd)  
TSYSOPTS(remote-job-command)  
TRACEOPT  
Trace Instructions:  
(L,S,F,C,X,K,D,H,V,W,P|*NONE|*ALL|*EXT|  
*COMMON|*INITPARMS|*CURRENT  
Command Trace Options:  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON|  
*NONE)  
Valid for z/OS, OpenVMS, VM, VSE, and Microsoft Windows only  
Valid for i5/OS, MS-DOS, OpenVMS, UNIX, Stratus VOS, and Microsoft Windows  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
Required Parameters  
The following parameters are required. Unless otherwise noted, the parameters apply to all remote node  
environments.  
SNODE(node-name)  
specifies a 1–16 character alphanumeric name for the remote node.  
Note: This value is case sensitive.  
SNODENVIRN(environment-name)  
specifies the remote environment to execute the job.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Submitting a Job on a Remote Node  
111  
Optional Parameters  
The following parameters, listed alphabetically, are optional. Unless otherwise noted, the parameters apply to  
all remote node environments.  
BATCHID(idname)  
specifies the VM remote Virtual Machine ID name. The valid range is 1–8 characters.  
CLASS(n)  
determines the node-to-node session where a Sterling Connect:Direct operation can execute. The  
CLASS is a number from 1–255. If you do not specify the CLASS parameter, it defaults to the  
maximum number of sessions defined in the mode description for the communications environment.  
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.  
CRC(*INITPARMS|I*NETMAP|N*OFF|F*ON|O)  
Determines whether node and process statement overrides for Cyclic Redundancy Check (CRC) are  
allowed. If this value is set to *OFF, setting overrides for CRC checking will be ignored. The default  
value is *INITPARMS.  
*INITPARMS (or *I) specifies that the CRC setting is determined by the value for the initialization  
parameter TCP.CRC.  
*NETMAP (or *N) specifies that the CRC setting is determined by the value for the NETMAP  
parameter, Cyclic Redundancy Check. The value for the initialization parameter TCP.CRC must be  
set to *ON and the value for the initialization parameter TCP.CRC.OVERRIDE must be set to *YES.  
*OFF (or *F) specifies that CRC is disabled.  
*ON (or *O) specifies that CRC is enabled.  
JOBFILE(filename)  
specifies the name of the file that contains the job to be submitted. This file must already exist on the  
node where the job is to be submitted.  
LINK(CMS-file-information)  
specifies where the CMS file is located. This parameter allows you to access the VM CMS file.  
owner id specifies the user ID for the owner of the CMS minidisk where the file is located.  
owner password specifies the password for the CMS minidisk where the file is located. This  
parameter accepts 1–8 characters. The default is ALL.  
LINK access mode specifies the LINK access mode. The following entries are valid:  
W for primary read/write  
M for primary multiple access  
R for primary read only  
RR for primary and secondary read only  
WR for primary read/write; alternate read only  
MW for primary multiple access; alternate read/write  
virtual address specifies the virtual address of the disk where the CMS file is located. A three-digit  
number is valid.  
NOTIFY(userid)  
specifies the user ID on the local node to receive status messages that are directed to the message  
queue of the user.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
112  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
PLEXCLASS(user-defined class)  
specifies a user-defined class containing up to eight characters associated with a Sterling  
Connect:Direct/Server in a Sterling Connect:Direct/Plex environment. This represents a type of server  
on which you want to submit a job.  
Note: This parameter is for use only in Sterling Connect:Direct for z/OS environments.  
PNAME(name)  
identifies the Process in any messages or statistics related to the operation. The name is from 1–12  
characters long. The first character must be alphabetic. The default name is CDSND.  
Note: Only Sterling Connect:Direct for i5/OS and Sterling Connect:Direct for UNIX support  
Process names with more than 8 characters.  
PNODEID(id, pswd, newpswd)  
specifies security user IDs and passwords at the local node. You should only use this parameter to  
validate security with a different ID than the one you used to sign on to Sterling Connect:Direct.  
id specifies the security ID passed to the security system at the local node (1–10 alphanumeric  
characters).  
pswd specifies the current security password for the specified ID. The security system at the local  
node can use this parameter to validate the current security password (1–10 alphanumeric characters).  
This is optional unless you have security set to require a password.  
newpswd specifies the new security password. The security system can use this parameter to change  
the current security password to the new security password (1–10 alphanumeric characters).  
Note: Although you can specify a value for the new password, Sterling Connect:Direct for i5/OS  
does not support this parameter.  
RMTWORK(*YES|*NO)  
specifies whether a remote Process can run on the session after Sterling Connect:Direct for i5/OS has  
completed its Process on the session.  
*YES allows a remote Process to run on the session after Sterling Connect:Direct for i5/OS completes  
its Process.  
*NO terminates the session after Sterling Connect:Direct for i5/OS executes the command function.  
SACCT(SNODE accounting-data)  
specifies the accounting data for the remote node. The maximum length of the accounting data is 256  
characters. If special characters are part of the accounting data, the string must be enclosed in single  
quotation marks.  
SNODEID(userid, pswd, newpswd)  
specifies security user IDs and passwords at the remote node. You should only use this parameter to  
validate security with a different ID than the one you used to sign on to Sterling Connect:Direct.  
userid specifies the security ID passed to the security system on the remote node (1–64 alphanumeric  
characters).  
pswd specifies the current security password and is used by the security system on the SNODE to  
validate the current security password (1–64 alphanumeric characters). This is optional unless the user  
has security set to require a password.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Submitting a Job on a Remote Node  
113  
newpswd specifies the new security password and is used by the security system to change the current  
security password to the new security password (1–64 alphanumeric characters).  
Note: Parameter values are case sensitive.  
Newpswd is not valid if the remote node is a Sterling Connect:Direct for i5/OS node.  
TRACEOPT  
Trace Instructions  
(L, S, F, C, X, K, D, H, V, W, P,|*NONE|*ALL|*EXT| *COMMON|*INITPARMS|*CURRENT)  
specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The  
following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the communications logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
W enables the communications dump.  
P enables the CIPC dump.  
*NONE turns off all traces.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)  
*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).  
*COMMON enables the communications traces. (L, S, F, C, and H)  
*INITPARMS indicates the traces specified in the initialization parameters.  
*CURRENT selects the trace bits that the session manager is currently using.  
Command Trace Options  
(L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON| *NONE  
specifies the trace bits that define functions to be traced for this command but not for the Process it  
runs. The following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the common logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
P enables the CIPC dump.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, and P)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
114  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
*EXT enables all product traces plus two other traces. (TRCICF and TRCJOB)  
*COMMON enables the most commonly used traces. (L, S, F, C, and H)  
*NONE turns off all traces.  
TSYSOPTS(remote-job-command)  
specifies system-specific submission information. For a remote i5/OS system, this parameter specifies  
a string ‘cmd(any valid batch CL command) [any valid parameters for the i5/OS SBMJOB  
command]’. This CL command is submitted on the remote i5/OS system through a SBMJOB  
command. This parameter is valid for i5/OS, OpenVMS, UNIX, Stratus VOS, and Microsoft  
Windows.  
See the IBM Sterling Connect:Direct Processes Web site at  
http://www.sterlingcommerce.com/documentation/processes/processhome.html for valid  
platform-specific parameters.  
Using the CDRUNJOB Screens  
Use the Connect:Direct Run Job (CDRUNJOB) screens to submit a job to a remote node.  
Submitting a Job to a Remote Node  
Complete the following steps to submit a job to a remote node:  
1. Access the CDRUNJOB screens by typing CDRUNJOB at the command line and pressing F4 or by  
selecting the RUNJOB option from the main menu.  
2. Type the remote node name at the command prompt and press Enter. The command retrieves the remote  
node environment and display fields for required parameters.  
3. Type values for required and optional parameters as appropriate and press Enter. Additional screens  
displays as required by the remote node type.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Submitting a Job on a Remote Node  
115  
The primary CDRUNJOB screen looks similar to the following.  
Connect:Direct Run Job (CDRUNJOB)  
Type choices, press Enter.  
Remote Node Name . . . . . . . . > hotpepper________  
Remote Environment . . . . . . . > AS400_____  
AS400, MVS, OS390, OS/400...  
Remote Job command . . . . . . . __________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________  
CRC . . . . . . . . . . . . . .  
Trace Options:  
*INITPARMS  
*INITPARMS, *NETMAP, *ON, *OFF  
Trace Instructions . . . . . .  
Command trace options . . . .  
Process Name . . . . . . . . . .  
Local Node User Info.:  
*CURRENT_________________  
*NONE____________________  
CDJOB_______ Name  
User Id . . . . . . . . . . .  
Password . . . . . . . . . . .  
New Password . . . . . . . . .  
User to Notify . . . . . . . . .  
*CURRENT__  
Character value, *CURRENT  
Character value  
Character value  
Name, *CURRENT, *NONE  
More...  
F13=How to use this display  
*CURRENT__  
F12=Cancel  
F3=Exit  
F4=Prompt  
F5=Refresh  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
116  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 9  
Compressing Files  
This chapter describes the Sterling Connect:Direct Compress (CDCOMP) command and its function. This  
chapter also shows sample CDCOMP screens and describes the parameters used with the CDCOMP  
command.  
Using the CDCOMP Command  
Use the CDCOMP command to compress a file on the i5/OS node before sending it to a remote node.  
Note: When you send a precompressed file to a remote node, specify the PRECMPR(*YES) in the  
FMSYSOPTS of the CDSND command to have the remote node decompress the file. See Chapter 3,  
Sending a File, for information on using the PRECMPR parameter with the Send operation. Tuning  
parameters are not supported with the CDCOMP command. If Sterling Connect:Direct Secure Plus is  
installed, PRECMPR(*YES) or DECMPR(*NO) options cannot be specified.  
Required CDCOMP Tasks  
You must always complete one of the following activities when you use the CDCOMP command:  
Compress members into a newly created file. You can create the file manually, or you can allow  
CDCOMP to create the file.  
Ensure that the output file contains no members before you execute CDCOMP.  
Ensure that the output file is a physical data file with a record length of at least 256 bytes.  
CDCOMP Command Example  
The following command is an example of how to code the CDCOMP command.  
CDCOMP INFILE(TESTLIB/FILE1) OUTFILE(TESTLIB/CMP_FILE)  
REPLACE(*YES) SELMBR((TEST1 TEST2)) EXCMBR((M1 M2))  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
118  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
CDCOMP Command Format  
The following table shows the format for the CDCOMP command.  
Command  
Parameters  
CDCOMP  
INFILE(library-name/file-name)  
OUTFILE(library-name/file-name)  
CKPTINV(n)  
EXCMBR(start-mbr end-mbr)  
REPLACE(*NO|*YES)  
SELMBR(start-mbr end-mbr new-mbr)  
Required Parameters  
The CDCOMP command has the following required parameters.  
INFILE (library-name/file-name)  
specifies the name and library of the file to be compressed. The input file is a database or a save file.  
library-name specifies the name of the library to be used.  
*LIBL specifies that the library list is used to locate the input file.  
*CURLIB specifies that the current library for the job is used to locate the input file.  
file-name specifies the name of the file to be compressed.  
OUTFILE (library-name/file-name)  
specifies the name and library of the database file to receive the compressed data. If the output file  
does not exist, it is created. The default value for library is *CURLIB.  
library-name specifies the name of the library to be used.  
*CURLIB specifies that the current library for the job is used to locate the output file.  
file-name specifies the name of the file to receive the compressed data.  
Optional Parameters  
The optional parameters, listed alphabetically, are as follows. Unless otherwise noted, the parameters apply to  
all remote node environments.  
CKPTINV(n)  
Number of bytes, from 1K to 2 gigabytes, to send or receive before taking a checkpoint. The format is  
nnnnnnn, nnnnnnK, or nnnnnnM, where K specifies thousands of bytes and M specifies millions of  
bytes. A value of 0 specifies no checkpoint restart Sterling Connect:Direct for i5/OS uses the value  
you specify, rounded up to the nearest record boundary, to determine when to take a checkpoint. If  
you specify a value between 1 and 1023, the value becomes 1024 or 1K.  
The value specified here is later used as the checkpoint interval for subsequent transfers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Compressing Files  
119  
EXCMBR(start-mbr end-mbr)  
specifies criteria by which file members are excluded from compression. In any case where a member  
meets the criteria of both the SELMBR and EXCMBR parameters, the EXCMBR specification  
overrides the selection of the member.  
You can type in multiple sets of values for this parameter.  
start-mbr specifies the name of the member to be excluded from compression or the first name in a  
range of members to be excluded. If no members are to be excluded, this field should be left blank.  
Possible values are:  
member-name specifies the name of the file member to be excluded from compression.  
generic*-member-name specifies a generic member name to exclude all members whose names  
begin with the specified characters.  
start-range specifies the first name in an alphanumeric range of members. Although member  
names in a range are treated as generics, they cannot be used with an asterisk (*). The first and  
last members specified in the range, as well as all members between, are excluded from  
compression.  
end-mbr specifies the last name in a range of members to be excluded from compression. Possible  
values are:  
*STARTMBR specifies that the name of the last member in the range is the same as the first  
member in the range, limiting the range to a single member. You should also use this value if you  
specified a generic in the starting member name (start-mbr) field. This is the default.  
end-range specifies the last name in an alphanumeric range of members. Although member  
names in a range are treated as generics, they cannot be used with an asterisk (*). The first and  
last members specified in the range, as well as all members between, are excluded from  
compression.  
REPLACE (*NO|*YES)  
specifies whether to replace the output member if it exists. This parameter applies to all members.  
Possible values are:  
*NO specifies that the member is not replaced if it exists. *NO is the default.  
*YES specifies that the member is replaced if it exists.  
SELMBR(start-mbr end-mbr new-mbr)  
specifies criteria by which file members are selected for compression. In any case where a member  
meets the criteria of both the SELMBR and EXCMBR parameters, the EXCMBR specification  
overrides the selection of the member.  
You can type in multiple sets of values for this parameter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
120  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
start-mbr specifies the name of the member to be compressed or the first name in a range of members  
to be compressed. Possible values are:  
*INFILE specifies the name of the member is the same as the name of the input file. *INFILE is  
the default.  
*ALL indicates all members in the input file is selected for compression.  
member-name specifies the name of the file member to be compressed.  
generic*-member-name specifies a generic member name to select all members whose names  
begin with the specified characters.  
start-range specifies the first name in an alphanumeric range of members. Although member  
names in a range are treated as generics, they cannot be used with an asterisk (*). The first and  
last members specified in the range, as well as all members between, are compressed.  
end-mbr specifies the last name in a range of members to be compressed. The possible values are:  
*STARTMBR indicates that the last member in the range is the same as the first member in the  
range, limiting the range to a single member. You should also use this value if you specified a  
generic in the Starting member name (start-mbr) field. *STARTMBR is the default.  
end-range specifies the last name in an alphanumeric range of members. Although member  
names in a range are treated as generics, they cannot be used with an asterisk (*). The first and  
last members specified in the range, as well as all members between, are compressed.  
new-mbr specifies a new name for the member specified in the start-mbr field. If *ALL, a generic*,  
or a range has been specified for member selection, this parameter must contain the *NONE value.  
Possible values are:  
*NONE indicates the name of the output member is the same as the name of the input member.  
*NONE is the default.  
newname specifies the new name for the output member.  
Using the CDCOMP Screen  
Use the Connect:Direct Compress File (CDCOMP) screen to compress a file on the i5/OS node before  
sending it to a remote node.  
Compressing a File Prior to Sending  
Complete the following steps to compress a file before sending it to a remote node:  
1. Access the CDCOMP screen by typing CDCOMP at the command line and pressing F4 or by selecting  
the Compress file option from the main menu.  
2. Type values for parameters as appropriate and press Enter.  
If you need additional entry fields for the fields that allow multiple sets of values, type a plus sign (+) in  
the field labeled + for more values and press Enter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Compressing Files  
121  
The following figure is a sample Connect:Direct Compress File (CDCOMP) screen.  
Connect:Direct Compress File (CDCOMP)  
Type choices, press Enter.  
Input file name . . . . . . . .  
Library . . . . . . . . . . .  
Output file name . . . . . . . .  
Library . . . . . . . . . . .  
File Members Selection List:  
Starting member name . . . . .  
Ending member name . . . . . .  
New member name . . . . . . .  
+ for more values  
_______  
*LIBL____  
_______  
Name  
Name, *LIBL  
Name  
*CURLIB__  
Name, *CURLIB  
*INFILE___  
*STARTMBR_  
*NONE_____  
Name, generic*, *INFILE, *ALL  
Name, *STARTMBR  
Name, *NONE  
Replace members . . . . . . . .  
File Members Exclusion List:  
Starting member name . . . . .  
Ending member name . . . . . .  
+ for more values  
*NO_  
*NO, *YES  
Name, generic*  
Name, *STARTMBR  
*STARTMBR_  
*INITPARMS  
Checkpoint Interval . . . . . .  
0-9999999, *INITPARMS  
Bottom  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F13=How to use this display  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
122  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 10  
Controlling Processes  
Sterling Connect:Direct for i5/OS implements a Sterling Connect:Direct Process Management Queue. You can  
use two commands to schedule, control, and monitor any active or queued Processes:  
CDSUBPROC command allows you to:  
Š
Š
Submit Sterling Connect:Direct Processes for asynchronous execution  
Control certain characteristics of the execution  
WRKCDPROC command allows you to work with active or queued Sterling Connect:Direct Processes.  
With this command, you can perform the following Process tasks:  
Š
Š
Š
Schedule  
Control  
Monitor  
This chapter explains the Process Management Queue, the CDSUBPROC command, and the WRKCDPROC  
command and their use for Process management.  
Understanding the Process Management Queue  
The Process Management Queue is a repository for Processes currently in the Sterling Connect:Direct for  
i5/OS system. Five logical queues are associated with the Process Management Queue:  
ACTIVQ - active, executing Processes  
WAITQ - Processes waiting to run  
HOLDQ - Processes currently held  
TIMERQ - Processes waiting for a timer event  
STARTQ - Processes being activated  
Understanding Asynchronous and Synchronous Processes  
The Process Management Queue contains synchronous and asynchronous Processes.  
Asynchronous Processes are those submitted using the CDSUBPROC command. These Processes are  
scheduled and maintained according to run instructions provided in the CDSUBPROC command.  
Synchronous Processes are Sterling Connect:Direct commands issued through CL programs and CL  
commands other than CDSUBPROC. They cannot be scheduled once they are in the Process Management  
Queue.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
124  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
The Process Management Queue handles all processes:  
Local Synchronous (Examples: CDSND, CDRCV, CDRUNTASK)  
Local Asynchronous (CDSUBPROC)  
Remote  
Submitting Processes for Asynchronous Execution  
The CDSUBPROC command allows you to submit a Sterling Connect:Direct Process to the Process queue for  
asynchronous execution. This command also allows you to determine:  
When the Process starts  
Whether the Process is retained in the queue after execution  
Whether the Process is placed in the HOLD queue initially  
Note: For TDSN and FDSN, the values of *LIBL, *CURLIB, QTEMP cannot be used when sending to or  
from an i5/OS system using Sterling Connect:Direct for i5/OS. A specific library name must be used  
for copying from or to a data set on the i5/OS.  
CDSUBPROC Command Example  
The following command example shows the CDSUBPROC command used to submit an asynchronous  
Process.  
CDSUBPROC CMD(CDSND SNODE(remote.node) SNODENVIRON(Windows)  
FDSN(‘library/file(mbr)’)  
FMSYSOPTS(‘TYPE(mbr)‘)) STARTT(‘11/22/96’ *NOON *WEEK)  
TDSN(‘\\system\drive\directory\file’)  
RETAIN(*YES)  
CDSUBPROC Command Format  
The following format is for the CDSUBPROC command. Required parameters are shown in bold print.  
Command  
Parameters  
CDSUBPROC  
CMD(command string)  
HOLD(*YES|*NO)  
PRIORITY(n)  
RETAIN(*YES|*NO|*INITIAL)  
STARTT(day,time,freq)  
TRACEOPT  
Trace Instructions:  
(L,S,F,C,X,K,D,H,V,W,P|*NONE|*ALL|*EXT|  
*COMMON|*INITPARMS|*CURRENT  
Command Trace Options:  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON|  
*NONE)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Controlling Processes  
125  
Required Parameter  
The CMD parameter is required for the CDSUBPROC command.  
CMD(command string)  
specifies the Sterling Connect:Direct command string to execute. This value must be a valid Sterling  
Connect:Direct for i5/OS command with any required parameters and subparameters. Sterling  
Connect:Direct checks the command and its parameters at submission. If the command or the  
parameters are not valid, the submission fails with an error message.  
Optional Parameters  
The following parameters are optional for the CDSUBPROC command.  
HOLD(*YES|*NO)  
specifies whether Sterling Connect:Direct places the Process in the HOLD queue upon submission.  
*YES places the Process in the HOLD queue immediately. HOLD(*YES) is mutually exclusive with  
the STARTT parameter.  
*NO prevents Sterling Connect:Direct from placing the Process in the HOLD queue.  
PRIORITY(n)  
specifies a priority value for the submitted Process. This parameter determines the Process position in  
the Process WAIT queue and can affect the order of Process execution. The value is 1–15, with 15  
being the highest priority. The default value is 7.  
RETAIN(*YES|*NO|*INITIAL)  
specifies whether Sterling Connect:Direct keeps a copy of the Process in the HOLD queue after the  
Process executes.  
*YES places the Process in the HOLD queue after execution.  
*NO deletes the Process after execution.  
*INITIAL indicates that the Process executes every time the Sterling Connect:Direct for i5/OS node  
initializes. If you select *INITIAL, the Process does not execute when you submit it.  
STARTT(day,time,freq)  
specifies when the submitted command runs. Day and time together indicate the scheduled time.  
Frequency indicates a repeated execution. If you specify frequency, Sterling Connect:Direct ignores  
any RETAIN parameter.  
day specifies the day of the week when the Process is executed. You can specify any of the following:  
*NONE, *SUN, *MON, *TUE, *WED, *THU, *FRI, *SAT, *TODAY, *TOMORROW, or the date.  
If you specify the date, you must give the date in the job date format. Input dates are interpreted  
according to the date format of the current job (i5/OS job date format).  
If you use day without a time, the time defaults to 00:00 (midnight). The default value is *NONE,  
which indicates no scheduled day.  
time indicates the time of day when the Process runs. You can specify time as any of the following:  
*NONE, *NOON, *MIDNIGHT, or hh:mm:ssXM.  
If you give time in the hh:mm:ssXM format, you can enter the time with or without separators.  
Minutes and seconds are optional. If you do not enter minutes and seconds, they default to 00. If you  
specify AM or PM, Sterling Connect:Direct assumes the time is in 12-hour format. If you do not  
select AM or PM, Sterling Connect:Direct assumes the time is in 24-hour format.  
If you specify time but not day, the Process is run on the first occurrence of the specified time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
126  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
frequency indicates how often the Process runs. You can determine the frequency by entering one of  
the following selections: *NONE, *DAY, or *WEEK.  
If you enter *NONE, the Process is run only once automatically. *DAY indicates that the Process is  
run every day at the same time after the first scheduled time. *WEEK releases the Process weekly at  
the same time and day of the week as the first execution.  
TRACEOPT  
Trace Instructions  
(L, S, F, C, X, K, D, H, V, W, P,|*NONE|*ALL|*EXT| *COMMON|*INITPARMS|*CURRENT  
specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The  
following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the communications logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
W enables the communications dump.  
P enables the CIPC dump.  
*NONE turns off all traces.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)  
*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).  
*COMMON enables the communications traces. (L, S, F, C, and H)  
*INITPARMS indicates the traces specified in the initialization parameters.  
*CURRENT selects the trace bits that the session manager is currently using.  
Command Trace Options  
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON| *NONE)  
specifies the trace bits that define functions to be traced for this command but not for the Process it  
runs. The following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the common logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
P enables the CIPC dump.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Controlling Processes  
127  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, and P)  
*EXT enables all product traces plus two other traces. (TRCICF and TRCJOB)  
*COMMON enables the most commonly used traces. (L, S, F, C, and H)  
*NONE turns off all traces.  
Using the CDSUBPROC Screens  
Use the Connect:Direct Submit Process (CDSUBPROC) screen to submit a Sterling Connect:Direct Process  
to the Process queue for asynchronous execution.  
Submitting a Process for Asynchronous Execution  
Complete the following steps to submit a Process to the Process queue for asynchronous execution:  
1. Access the CDSUBPROC screen by typing CDSUBPROC at the command line and pressing F4 or by  
choosing the submit process option from the Sterling Connect:Direct menu.  
2. Enter the parameters that define the Process execution: CMD, STARTT, RETAIN, HOLD, and  
PRIORITY.  
3. After you enter the command, press F4 to display the applicable entry fields for the command.  
4. After you complete the parameters for the CDSUBPROC command, press Enter. Your Process name and  
number are assigned and displayed. The Process is placed in the Process Management Queue.  
The following screen is an example of the Connect:Direct Submit Process screen.  
Submit C:D Process (CDSUBPROC)  
Type choices, press Enter.  
Connect:Direct command . . . . .  
CMD______________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
____________________________________________________________________________________  
__________________________________________________________________  
Execution date & time:  
...  
Start date . . . . . . . . . .  
Start time . . . . . . . . . .  
Frequency . . . . . . . . . .  
Retain process after execution  
Hold process on queue . . . . .  
Priority on queue . . . . . . .  
*NONE___  
*NONE___  
*NONE___  
*NO_____  
*NO  
Character value, *SUN...  
Character value, *NONE...  
*NONE, *DAY, *WEEK  
*NO, *YES, *INITIAL  
*NO, *YES  
7______  
1-15  
Bottom  
F12=Cancel  
F3=Exit  
F13=How to use this display  
F4=Prompt  
F5=Refresh  
F10=Additional parameters  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
128  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Working with Sterling Connect:Direct Processes  
Use the WRKCDPROC command to schedule, monitor, and control the Processes. The following options are  
available:  
Selecting Specific Processes  
Selection options allow you to specify the Processes with which you work.  
Viewing All Processes  
The Display option allows you to view detailed information for all Processes, including execution information  
for active Processes, both synchronous and asynchronous.  
Note: Your system administrator specifies the user’s authority. If you do not have administrative authority,  
you can only select Processes that you submit.  
WRKCDPROC Command Example  
The following command example shows the WRKCDPROC command used to work with Sterling  
Connect:Direct Processes.  
WRKCDPROC QNAME(ACTIVQ) PNAME(CDSND) PNUM(1896)  
WRKCDPROC Command Format  
The following syntax is for the WRKCDPROC command.  
Command  
Parameters  
WRKCDPROC  
PNAME(*ALL|name|generic)  
PNUM(n|*ALL)  
PUSER(*ALL|name|generic)  
QNAME(ACTIVQ|HOLDQ|WAITQ|TIMERQ|STARTQ|*ALL)  
RMTNODE(*ALL|name|generic)  
TYPE(*|L|R|S|A)  
Required Parameters  
There are no required parameters for the WRKCDPROC command. If you do not specify any parameters,  
Sterling Connect:Direct displays information for all Processes that you are authorized to view.  
Optional Parameters  
The following parameters are optional for the WRKCDPROC command.  
PNAME(*ALL|name|generic)  
specifies the Sterling Connect:Direct Processes you are selecting. The PNAME parameter can contain  
1 to 12 characters and has the following options:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                             
Controlling Processes  
129  
*ALL indicates that you select all Process names.  
name is the name of a specific Process you want to select. Enter the name of a Sterling  
Connect:Direct Process.  
generic identifies a generic Process name. For example, CD* selects all Processes that begin with CD.  
PNUM(n|*ALL)  
specifies the Process number for the selected Process. This parameter has two options:  
*ALL indicates that you select all Process numbers.  
n is the number of a specific Process you want to select. Enter the number of a Sterling  
Connect:Direct Process.  
PUSER(*ALL|name|generic)  
specifies the Sterling Connect:Direct Processes submitted by a specific user. This parameter has the  
following options:  
*ALL indicates that you choose all submitter IDs.  
name is the user ID of a specific user whose Processes you want to select. Enter the user ID of a  
Sterling Connect:Direct user.  
generic identifies a generic user name. For example, TH* would select Processes submitted by all  
users whose submitter IDs begin with TH.  
QNAME(ACTIVQ|HOLDQ|WAITQ|TIMERQ|STARTQ|*ALL)  
specifies the Sterling Connect:Direct queue for the Processes you want to select. This parameter has  
six options:  
ACTIVQ selects all Processes that are currently executing.  
HOLDQ selects all Processes that are currently in the HOLD queue.  
WAITQ selects all Processes that are waiting for a session manager to run.  
TIMERQ selects all Processes that are awaiting execution time or retry time after a session failure.  
STARTQ selects all Processes that are ready for execution.  
*ALL selects all Processes.  
RMTNODE(*ALL|name|generic)  
specifies the selection of Processes that have the specified remote node name. The RMTNODE  
parameter has the following three options:  
*ALL indicates all remote node names.  
name indicates the name of a specific remote node.  
generic indicates a generic node name. For example, CD* would select all remote node names that  
begin with CD.  
TYPE(*|L|R|S|A)  
specifies the category or type of Sterling Connect:Direct Process to select. Five values are options for  
the TYPE parameter:  
* specifies all Processes.  
L specifies all Processes initiated on the local node.  
R specifies all Processes initiated on the remote node.  
S specifies all synchronous Processes initiated on the local node.  
A specifies all Processes except synchronous processes initiated on the local node.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
130  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Using the WRKCDPROC Screens  
Use the Work with Connect:Direct Process (WRKCDPROC) screen to monitor and control Processes in the  
subsystem.  
Monitoring and Controlling Processes  
Complete the following steps to monitor or control a Process:  
1. Access the WRKCDPROC screen by typing WRKCDPROC at the command line and press F4 or  
choose the Work with Sterling Connect:Direct Processes option from the Sterling Connect:Direct main  
menu.  
2. Complete the information requested on the screen and press Enter.  
The following screen is an example of the Work with C:D Process prompt screen.  
Work with C:D Process (WRKCDPROC)  
Type choices, press Enter.  
Process Type . . . . . . . . . .  
Process Queue . . . . . . . . .  
Process Name . . . . . . . . . .  
Process number . . . . . . . . .  
Processing User . . . . . . . .  
Remote Node . . . . . . . . . .  
*
*, L, R, S, A  
*ALL, ACTIVQ, HOLDQ, WAITQ...  
Character value  
Character value  
Character value  
*ALL  
*ALL  
*ALL  
*ALL  
*ALL  
Bottom  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F13=How to use this display  
F24=More keys  
The next screen is a sample of the WRKCDPROC screen (View 1) that displays in response to the  
information you entered on the prompt screen.  
Work with C:D Process  
Type option and press Enter.  
2=Change  
3=Hold  
4=Delete  
5=Display  
6=Release  
7=End  
8=Suspend  
Process  
Opt Name  
CDSND  
Process  
Number  
00014895 A  
Remote  
Node  
FRAN.CDDV3600  
Ty Queue  
Submitter  
IDEVUSER  
Task  
HOLDQ  
Bottom  
F21=Command line  
F1=Help  
F3=Exit  
F5=Refresh  
F11=View 2  
F12=Cancel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Controlling Processes  
131  
Press F11 to display View 2, which provides additional information about Processes you selected. You can  
select an option to monitor or change Processes from this screen or the View 1 screen.  
Work with C:D Process  
Type option and press Enter.  
2=Change  
3=Hold  
4=Delete  
5=Display  
Security  
6=Release  
7=End  
8=Suspend  
Process  
Opt Name  
CDSND  
Process  
Scheduled Scheduled  
Date Time  
: :  
Number  
Ty ID  
Retry Prty  
00  
00014895 A  
IDEVUSER  
07  
Bottom  
F1=Help  
F3=Exit  
F5=Refresh  
F11=View 2  
F12=Cancel  
F21=Command line  
WRKCDPROC Option Descriptions  
The seven options you can select from the Work With C:D Process screens are described in the following  
paragraphs. To select these options, type the appropriate number in the option column next to the applicable  
Process.  
Changing Process Characteristics  
Change (Option 2) allows you to modify certain Process characteristics. This option is only valid for  
asynchronous local Processes. The date format is subject to the interpretation of the job currently running.  
Moving an Nonexecuting Asynchronous Process  
Hold (Option 3) allows you to move a nonexecuting asynchronous Process (WAIT or TIMER queue) to the  
HOLD queue. No additional screen is displayed.  
Removing an Nonexecuting Asynchronous Process  
Delete (Option 4) allows you to remove a nonexecuting asynchronous Process from the system. The Process is  
in any queue except ACTIVE or WAITQ when you delete it. When you delete a Process, a confirmation panel  
displays.  
Displaying Process Details  
Display (Option 5) provides you the option to display details about any Process in the system. A sample of the  
Process information follows.  
Note: If Sterling Connect:Direct Secure Plus is installed and you have authority, a WRKCDPROC screen  
containing Sterling Connect:Direct Secure Plus information displays after you press Enter. Refer to  
IBM Sterling Connect:Direct Secure Plus for i5/OS Implementation Guide for additional information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
132  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
The following is an example of the Display C:D Process screen.  
Display C:D Process  
Process Name . :  
Number . . . . :  
Submitter . . :  
Frequency . . :  
Submit Date . :  
Schedule Date :  
CDSND  
Queue . . . . :  
Remote Node . :  
Priority . . . :  
Retain . . . . :  
Submit Time . :  
Schedule Time :  
HOLDQ  
CDDV3600  
07  
*NO  
11:59:28  
00014895  
LCLUSER  
*NONE  
03/16/04  
------------------------- Activity Details -------------------------  
Function . . . :  
From File . . :  
From Member . :  
To File . . . :  
To Member . . :  
File Bytes . . :  
Transmitted . :  
Compression % :  
Check point . :  
% Complete . . :  
0
0
0.00  
*NO  
N/A  
F1=Help  
F3=Exit  
F5=Refresh  
F12=Cancel  
F21=Command line  
Releasing a Process in the HOLD Queue  
Release (Option 6) permits you to release a Process in the HOLD queue and move it to the WAIT queue. There  
it is available for execution. No additional screen displays.  
Terminating and Flushing an Executing PNODE Process  
End (Option 7) terminates and flushes any executing synchronous or asynchronous PNODE process from the  
system. When using this option, use a different terminal from the one where the Process is submitted. If you  
use the same terminal, the next submitted Process fails. A confirmation panel displays when you end a Process.  
The default for this option is *CNTRLD. The value *IMMED should not be used unless *CNTRLD has first  
been attempted.  
Interrupting an Executing Asynchronous Process  
Suspend (Option 8) allows you to interrupt any executing asynchronous Process. This option also allows you  
to move the Process to the HOLD queue (LOCAL). You can then release the (LOCAL) Process from the  
HOLD queue to resume execution or delete it. If the COPY operation was checkpointed, you can use  
suspend/release to interrupt the COPY and later resume it from the latest checkpoint.  
Releasing or Holding Asynchronous Processes  
RLSCDPROC and HLDCDPROC allow you to release all held Processes or all Processes currently in the  
TIMER queue that meet the selection criteria identified when the command is entered. The commands can be  
used in either batch or interactive mode. Only local asynchronous Processes are considered for release.  
Following are sample RLSCDPROC and HLDCDPROC screens.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Controlling Processes  
133  
RLSCDPROC Screen  
Release Held C:D Process (RLSCDPROC)  
Type choices, press Enter.  
Process Type . . . . . . . . . .  
Process Queue . . . . . . . . .  
Process Name . . . . . . . . . .  
Process number . . . . . . . . .  
Processing User . . . . . . . .  
Remote Node . . . . . . . . . .  
A
A
HOLDQ  
*ALL  
*ALL  
*ALL  
*ALL  
HOLDQ  
Character value  
Character value  
Character value  
F1=Help  
F3=Exit  
F5=Refresh  
F12=Cancel  
F21=Command line  
HLDCDPROC Screen  
Hold Specified C:D Process (HLDCDPROC)  
Type choices, press Enter.  
Process Type . . . . . . . . . .  
Process Queue . . . . . . . . .  
Process Name . . . . . . . . . .  
Process number . . . . . . . . .  
Processing User . . . . . . . .  
Remote Node . . . . . . . . . .  
A
A
WAITQ  
*ALL  
*ALL  
*ALL  
*ALL  
WAITQ, TIMERQ  
Character value  
Character value  
Character value  
F1=Help  
F3=Exit  
F5=Refresh  
F12=Cancel  
F21=Command line  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
134  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 11  
Using Sterling Connect:Direct Statistics  
Sterling Connect:Direct for i5/OS logs statistics information for all Processes. Each component of Sterling  
Connect:Direct for i5/OS generates statistics data to the statistics manager (STATMGR) job. The long-running  
STATMGR job formats the statistics information and writes it to the statistics file. You can view the results of  
the Processes by using the CDSELSTAT command. This chapter explains how to use the CDSELSTAT  
command, the command format, and the CDSELSTAT screens. For detailed information about the statistics  
facility, refer to the IBM Sterling Connect:Direct for i5/OS Installation and Administration Guide.  
Selecting Statistics Information  
Use the CDSELSTAT command to select statistics information for viewing or printing.  
Specifying Selection Criteria  
Specify several selection criteria to limit the records selected. The command selects records from either the  
active statistics file or a named statistics database file. Within the file, all members are available to  
CDSELSTAT and are viewed together as a single logical file.  
CDSELSTAT Command Example  
The following figure presents a sample CDSELSTAT command.  
CDSELSTAT PERIOD(‘10:00:00’ ‘11/13/98’) PNAME(CDSND)  
CDSELSTAT Command Format  
The following table displays the command format for the CDSELSTAT command.  
Command  
Parameters  
CDSELSTAT  
FILE(filename|*ACTIVE)  
FORMAT(*SUMMARY|*DETAIL)  
OUTPUT(*|*PRINT)  
PERIOD([start-time, end-time|*NOON|*MIDNIGHT|*AVAIL] [start-date, end-date|*TODAY|*AVAIL])  
PNUM(process-number|*ALL)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
136  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Command  
Parameters  
PNAME(process-name|generic|*ALL)  
PUSER(local-userid|generic|*ALL)  
RCDTPYE(record-type|*ALL)  
RMTNODE(remote-node-name|*ALL)  
TRACE(L,S,F,C,X,K,D,H,V,W,P|*NONE|*ALL|*EXT|*COMMON|*INITPARMS|*CURRENT)  
Required Parameters  
The CDSELSTAT command has no required parameters.  
Optional Parameters  
The following parameters are optional for the CDSELSTAT command.  
FILE(filename|*ACTIVE) allows you to specify the statistics database file to search.  
filename specifies a statistics database file.  
*ACTIVE directs the command to search the file to which Sterling Connect:Direct is currently  
logging statistics.  
FORMAT(*SUMMARY|*DETAIL) controls how the selection results are presented. Sterling  
Connect:Direct for i5/OS presents the selected records in timestamp sequence regardless of the output  
format chosen. FORMAT allows you to select two formats.  
*SUMMARY specifies that the summary information for the selected record is presented as a single  
row in a scrollable list.  
*DETAIL specifies that the entire contents of information for the selected record is formatted into a  
spooled file. You can view this file at a display station, or you can queue the file to be printed. Each  
format is displayed or printed. When you use FORMAT(*SUMMARY) with OUTPUT(*), you can  
toggle between the two views.  
OUTPUT(*|*PRINT) controls how the selection results are output. OUTPUT allows you to select two  
options.  
* specifies that the statistics information displays on the screen.  
*PRINT specifies that the statistics information is created as a spool file named CDSELSTAT.  
PERIOD([start-time, end-time|*NOON|*MIDNIGHT|*AVAIL] [start-date,  
end-date|*TODAY|*AVAIL]) allows the search to be limited to a specific period of time rather than  
including the entire range available in the statistics file. The parameters for the PERIOD keyword are  
positional.  
start-time and end-time specify the records being requested by giving the starting time and the  
ending time for statistics selection. Both start-time and end-time accept any one of the following  
subparameters:  
hh:mm:ss XM indicates a beginning and/or an ending time to use as selection criteria for the  
requested records. Indicate the times as follows: hh specifies hours, mm specifies minutes, ss  
specifies seconds, XM specifies AM or PM. If you do not specify AM or PM, Sterling  
Connect:Direct assumes a 24-hour clock.  
*NOON specifies 12:00:00 for the time value  
*MIDNIGHT specifies 00:00:00 for the time value.  
*AVAIL specifies the earliest available time for the date specified.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Using Sterling Connect:Direct Statistics  
137  
start-date and end-date indicate the records being selected by date criteria for statistics selection.  
Both start-date and end-date accept one of the following formats:  
mmddyy, mm/dd/yy, mm.dd.yy.  
Input dates are interpreted according to the date format of the current job (i5/OS job date format).  
*TODAY specifies the current date. The starting and ending date fields default to *TODAY.  
*AVAIL specifies the earliest and latest date in the file. The starting and ending time fields  
default to *AVAIL.  
PNUM(process-number|*ALL) specifies the number of the Process to be selected.  
PNAME(process-name|generic|*ALL) specifies the name of the Process to be selected. The PNAME  
parameter can contain 1 to 12 characters and allows generic selections.  
PUSER(local-userid|generic|*ALL) specifies the local user ID of the Process to be selected. This  
parameter allows generic selections.  
RCDTYPE(record-type|*ALL) specifies the record type of the Process to be selected.  
RMTNODE(remote-node-name|*ALL) specifies the remote node name of the Process to be selected.  
This parameter allows generic selections.  
TRACE  
Trace Instructions  
(L, S, F, C, X, K, D, H, V, W, P,|*NONE|*ALL|*EXT| *COMMON|*INITPARMS|*CURRENT)  
specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The  
following are valid options:  
L enables the main line logic trace for all components.  
S enables the Process step logic trace.  
F enables the file handler trace.  
C enables the communications logic trace.  
X enables the XDR trace.  
K enables the KQV logic trace.  
D enables the all-purpose data dump.  
H enables the FMH dump.  
V enables the XDR dump.  
W enables the communications dump.  
P enables the CIPC dump.  
*NONE turns off all traces.  
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)  
*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).  
*COMMON enables the communications traces. (L, S, F, C, and H)  
Using the CDSELSTAT Screens  
Use the CDSELSTAT screen to select statistics information for viewing or printing. You can specify several  
selection criteria to limit the records selected or choose a summary of all records. In this section, two methods  
of displaying and printing both summary and detail statistics are shown.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
138  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Selecting and Displaying Summary Statistics  
Complete the following steps to select and display summary statistics:  
1. Access the CDSELSTAT screens by typing CDSELSTAT at the command line and pressing F4 or by  
choosing the select statistics option (13) from the Sterling Connect:Direct main menu.  
The following screen is a sample of the first screen in the CDSELSTAT screen flow.  
Select C:D Statistics (CDSELSTAT)  
Type choices, press Enter.  
Input file name . . . . . . . .  
Library . . . . . . . . . . .  
Time period for selection.:  
*ACTIVE___  
__________  
Name, *ACTIVE  
Name, *LIBL  
Period starting time . . . . .  
Period starting date . . . . .  
Period ending time . . . . . .  
Period ending date . . . . . .  
Process number . . . . . . . . .  
Process name . . . . . . . . . .  
User ID . . . . . . . . . . . .  
Remote node name . . . . . . . .  
Statistics record type . . . . .  
+ for more values  
*AVAIL____  
*TODAY____  
*AVAIL____  
*TODAY____  
*ALL____  
*ALL________ Name, *ALL  
*ALL______ Name, *ALL  
*ALL____________  
*ALL___  
_______  
*_____  
*SUMMARY  
*NONE_____  
Time, *AVAIL  
Date, *TODAY, *AVAIL  
Time, *AVAIL  
Date, *TODAY, *AVAIL  
Number, *ALL  
Record type, *ALL  
Output destination . . . . . . .  
Output format . . . . . . . . .  
Trace bits string . . . . . . .  
*, *PRINT  
*SUMMARY, *DETAIL  
*NONE, trace string  
Bottom  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
2. To display summary information, press Enter (* is the default Output destination and *SUMMARY is the  
default Output format). The following screen, Select C:D Statistics, is displayed. The displayed summary  
information includes an option column where you can request to display or print detailed information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Sterling Connect:Direct Statistics  
139  
about a particular statistics record. Type 5 in the option column for the Record type you want to review to  
display the detailed information and press Enter.  
Note: You could also type 6 and press Enter for a print version of the detail list, which is spooled for printing  
to the default output queue. See the next section for information on retrieving a spooled file.  
Select C:D Statistics  
Process number . .  
Process name . . .  
*ALL  
*ALL  
Statistics file :  
Library . . . . :  
Position to date  
CDSTATFILE  
CDDV3600  
Type options, press Enter.  
5=Display details 6=Print details  
Process  
Opt number  
5
Process  
name  
Record Step  
Event  
time  
Event  
date  
Message  
ID  
type  
name  
GNMSG  
JOBEND  
GNMSG  
TLSES  
JOBSUB  
GNMSG  
JOBSTR  
GNMSG  
09:15:46 03/16/04  
09:15:46 03/16/04  
09:15:51 03/16/04  
09:16:53 03/16/04  
09:16:53 03/16/04  
09:16:53 03/16/04  
09:16:55 03/16/04  
09:16:55 03/16/04  
_
_
_
_
_
_
More...  
Parameters or command  
===>  
F3=Exit  
F4=Prompt  
F9=Retrieve  
F11=View 2  
F12=Cancel  
The following screen shows the results of using the display option, Output destination(*).  
Display Spooled File  
File . . . . . :  
Control . . . . .  
Find . . . . . .  
CDSELSTAT  
Page/Line  
Columns 1 - 130  
1/6  
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8....  
C:D i5 Select Statistics (CDSELSTAT) Detail 03/16/04 12:10:55 Page 0001  
------------------------------------------------------------------------------------  
Event:  
Date/Time:  
Text:  
General Message Event (GNMSG)  
03/16/04 09:15:46  
Connect:Direct job ended: 186578/CDDV3600/CDSMGR, CODE=N.  
Note: If you have admin authority and Sterling Connect:Direct Secure Plus is installed, the  
CDSELSTAT screen displays Sterling Connect:Direct Secure Plus information. Refer to the  
IBM Sterling Connect:Direct Secure Plus for i5/OS Implementation Guide for information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
140  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Selecting and Printing Detail Statistics  
Complete the following steps to select and print detail statistics:  
1. Access the CDSELSTAT screens by typing CDSELSTAT at the command line and pressing F4 or by  
selecting the select statistics option from the Connect:Direct main menu.  
The first CDSELSTAT screen is displayed.  
Select C:D Statistics (CDSELSTAT)  
Type choices, press Enter.  
Input file name . . . . . . . .  
Library . . . . . . . . . . .  
Time period for selection.:  
*ACTIVE___  
__________  
Name, *ACTIVE  
Name, *LIBL  
Period starting time . . . . .  
Period starting date . . . . .  
Period ending time . . . . . .  
Period ending date . . . . . .  
Process number . . . . . . . . .  
Process name . . . . . . . . . .  
User ID . . . . . . . . . . . .  
Remote node name . . . . . . . .  
Statistics record type . . . . .  
+ for more values  
*AVAIL____  
*TODAY____  
*AVAIL____  
*TODAY____  
*ALL____  
*ALL________ Name, *ALL  
*ALL______ Name, *ALL  
*ALL____________  
*ALL___  
_______  
*PRINT  
*DETAIL  
*NONE_____  
Time, *AVAIL  
Date, *TODAY, *AVAIL  
Time, *AVAIL  
Date, *TODAY, *AVAIL  
Number, *ALL  
Record type, *ALL  
Output destination . . . . . . .  
Output format . . . . . . . . .  
Trace bits string . . . . . . .  
*, *PRINT  
*SUMMARY, *DETAIL  
*NONE, trace string  
Bottom  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
2. To print a detail report of the CDSELSTAT file, change the Output destination to *PRINT and the Output  
format to *DETAIL, and then press Enter. Sterling Connect:Direct for i5/OS creates a print version of the  
detail list and spools it for printing to the default output queue.  
Note: The default output queue is named CDOUT and is located in the Sterling Connect:Direct library.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Sterling Connect:Direct Statistics  
141  
3. To display the list of spooled files in the output queue, at the command line, type WRKOUTQ  
cdlib/CDOUT where cdlib is the name of your Sterling Connect:Direct library.  
Work with Output Queue  
Queue: CDOUT  
Library: CDLIB  
Status: RLS  
Type options, press Enter.  
1=Send 2=Change 3=Hold  
8=Attributes 9=Work with printing status  
4=Delete  
5=Display  
6=Release  
7=Messages  
Opt  
File  
CDTRACE  
CDLOG  
CDLOG  
CDLOG  
CDLOG  
CDTRACE  
CDLOG  
CDLOG  
CDSELSTAT  
User  
User Data  
SMGR  
Sts  
RDY  
Pages  
159  
Copies Form Type  
Pty  
CDDV3600  
CDDV3600  
CDDV3600  
CDDV3600  
CDDV3600  
CDDV3600  
CDDV3600  
CDDV3600  
LCLUSER  
1
1
1
1
1
1
1
1
1
*STD  
*STD  
*STD  
*STD  
*STD  
*STD  
*STD  
*STD  
*STD  
5
5
5
5
5
5
5
5
5
RDY  
RDY  
RDY  
RDY  
RDY  
RDY  
RDY  
RDY  
1
1
1
1
5
1
1
27  
RMTSYSTEM  
5
Bottom  
Parameters for options 1, 2, 3 or command  
===>  
F3=Exit  
F11=View 2  
F12=Cancel  
F20=Writers  
F22=Printers  
F24=More keys  
4. In the Opt column, type 5 next to the CDSELSTAT spooled file and press Enter to go to the Display  
Spooled File screen. (If you have a lot of files in the output queue, you can press F18 to quickly go to the  
bottom of the spooled file list.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
142  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
The following screen shows the results of using the display option, Output destination, (*PRINT).  
Display Spooled File  
File . . . . . : CDSELSTAT  
Control . . . . .  
Page/Line 1/6  
Columns  
1 - 130  
Find . . . . . .  
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8....  
+....9....+....0....+....1....+....2....+....3  
C:D i5  
Select Statistics (CDSELSTAT) Detail 03/18/04 15:45:05  
Page 0001  
------------------------------------------------------------------------------------  
Event:  
Job Submitted (JOBSUB)  
Date/Time:  
Job Name:  
Job Program:  
03/10/04  
CDSMGR  
SMMAIN  
11:09:07  
Job Number: 186005  
------------------------------------------------------------------------------------  
Event:  
Date/Time:  
Text:  
General Message Event (GNMSG)  
03/10/04 11:09:07  
C:D i5 Job submitted: CDSMGR.  
------------------------------------------------------------------------------------  
Event:  
Job Started (JOBSTR)  
Date/Time:  
Job Name:  
Job Program:  
03/10/04  
CDSMGR  
SMMAIN  
11:09:09  
Job Number: 186005  
------------------------------------------------------------------------------------  
Event:  
Date/Time:  
Text:  
General Message Event (GNMSG)  
03/10/04 11:09:10  
Connect:Direct job started: 186005/CDDV3600/CDSMGR  
More...  
F3=Exit  
F12=Cancel  
F19=Left  
F20=Right  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 12  
Decompressing Files  
This chapter describes the Sterling Connect:Direct decompress (CDDECOMP) command and its function. This  
chapter also shows sample CDDECOMP screens and describes the parameters used for the CDDECOMP  
command.  
Using the CDDECOMP Command  
Files are received from another node and archived on the i5/OS node as compressed files. Use the  
CDDECOMP command to decompress these files.  
Note: Tuning parameters are not supported with the CDDECOMP command when sending a file.  
CDDECOMP Command Example  
The following command is an example of how to code the CDDECOMP command.  
CDDECOMP INFILE(TESTLIB/CMP_FILE1) OUTFILE(TESTLIB/FILE2)  
REPLACE(*YES)  
CDDECOMP Command Format  
The following are the parameters for the CDDECOMP command:  
Command  
Parameters  
CDDECOMP  
INFILE(library-name/file-name)  
OUTFILE(library-name/file-name)  
NEWNAME(current-member-name, new-member-name)  
REPLACE(*NO|*YES)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
144  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Required Parameters  
The CDDECOMP command has two required parameters.  
INFILE(library-name/file-name)  
specifies the name and library of the file to be decompressed. The default for library is *LIBL.  
library-name specifies the name of the library to be used.  
*LIBL specifies that the library list is used to locate the input file.  
*CURLIB specifies that the current library for the job is used to locate the input file.  
file-name specifies the name of the file to be decompressed.  
OUTFILE(library-name/file-name)  
specifies the name and library of the file to receive the uncompressed data. If the output file does not  
exist, it is created. The default value for library is *CURLIB.  
library-name specifies the name of the library to be used.  
*LIBL specifies that the library list is used to locate the input file.  
*CURLIB specifies that the current library for the job is used to locate the output file.  
file-name specifies the name of the file to receive the decompressed data.  
Optional Parameters  
The optional parameters are listed alphabetically. Unless otherwise noted, the parameters apply to all remote  
node environments.  
NEWNAME(current-member-name, new-member-name)  
specifies whether to rename selected member(s) when decompressed. You can type in multiple sets of  
values for this parameter.  
current-member-name specifies the name of the compressed member to be renamed.  
new-member-name specifies the new name to be given to the member when it is decompressed.  
REPLACE(*NO|*YES)  
specifies whether to replace the output member if it exists. This parameter applies to all members.  
*NO is the default. Possible values are:  
*NO specifies that the member is not replaced if it exists.  
*YES specifies that the member is replaced if it exists.  
Using the CDDECOMP Screen  
Use the CDDECOMP screen to decompress a file on the i5/OS node after receiving it from a remote node.  
Decompressing a File  
Complete the following steps to decompress a file after receiving it from a remote node:  
1. Access the CDDECOMP screen by typing CDDECOMP at the command line and pressing F4 or by  
selecting the Decompress option from the main menu.  
2. Type values for parameters as appropriate and press Enter.  
If you need additional entry fields for multiple sets of values, type a plus sign (+) in the field labeled + for  
more values and press Enter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
Decompressing Files  
145  
The following figure shows a sample Connect:Direct Decompress File (CDDECOMP) screen:  
Connect:Direct Decompress File (CDDECOMP)  
Type choices, press Enter.  
Input file name . . . . . . . .  
Library . . . . . . . . . . .  
Output file name . . . . . . . .  
Library . . . . . . . . . . .  
Replace members . . . . . . . .  
Rename members:  
______  
*LIBL___  
_____  
*CURLIB__  
*NO_  
Name  
Name, *LIBL  
Name  
Name, *CURLIB  
*NO, *YES  
_
Current member name . . . . .  
New member name . . . . . . .  
_________  
_________  
Character value  
Character value  
+ for more values _  
Bottom  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
146  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 13  
Displaying Sterling Connect:Direct Message  
Descriptions  
Sterling Connect:Direct for i5/OS generates messages that detail aspects of the Sterling Connect:Direct for  
i5/OS operation. Sterling Connect:Direct for i5/OS routes two types of messages during operations:  
Sterling Connect:Direct messages that are routed to the Sterling Connect:Direct log file  
Status messages that are routed to a single user ID identified in the Sterling Connect:Direct initialization  
parameters file during installation  
You can send Sterling Connect:Direct messages to the Sterling Connect:Direct user ID or the QSYSOPR  
message queues. You can also use the Sterling Connect:Direct for i5/OS command Display Sterling  
Connect:Direct Message File (DSPCDMSGD) to display the message text for Sterling Connect:Direct  
messages.  
Specifying Recipient of Status Messages  
Complete the following steps to specify the user who receives status messages:  
1. Access the Change Connect:Direct Parameters (CHGCDPARM) screen by typing CHGCDPARM at  
the command line and pressing F4 or by choosing the Change Connect:Direct parameters option from the  
main administration menu.  
2. Specify the user ID in the User to Receive Sterling Connect:Direct Messages (TOUSR) parameter on the  
Change Connect:Direct Parameters (CHGCDPARM) screen and press Enter. This is the user profile  
that receives Sterling Connect:Direct status messages.  
Refer to the IBM Sterling Connect:Direct for i5/OS Installation and Administration Guide for details on  
providing user profile information.  
Using the DSPCDMSGD Command  
Use the DSPCDMSGD command to display the text associated with a specified Sterling Connect:Direct  
message ID.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
148  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
DSPCDMSGD Command Example  
The following figures illustrate two ways of accessing a Sterling Connect:Direct message.  
DSPCDMSGD CDMSGID(AFLH001I)  
DSPCDMSGD AFLH001I  
DSPCDMSGD Command Format  
The following is the parameter for the DSPCDMSGD command:  
Command  
Parameters  
DSPCDMSGD  
CDMSGID(msgid)  
Required Parameter  
The DSPCDMSGD command has one required parameter.  
CDMSGID(msgid)  
specifies an eight-character Sterling Connect:Direct message ID.  
Optional Parameters  
There are no optional parameters for the DSPCDMSGD command.  
Using the DSPCDMSGD Screen  
Use the Display Connect:Direct Message (DSPCDMSGD) screen to display the text for Sterling  
Connect:Direct message IDs that are returned in the Sterling Connect:Direct log file and statistics file for each  
operation.  
Displaying Sterling Connect:Direct Message Text  
Complete the following steps to display the text for Sterling Connect:Direct messages IDs:  
1. Access the DSPCDMSGD screen by typing DSPCDMSGD at the command line and pressing F4 or by  
choosing the display message option from the main menu.  
2. Type the Sterling Connect:Direct message ID and press Enter. A screen is displayed with the message text  
for the specified message ID.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Displaying Sterling Connect:Direct Message Descriptions  
149  
The following screen is an example of the screen associated with the DSPCDMSGD command.  
Display Connect:Direct Message (DSPCDMSGD)  
Type choices, press Enter.  
Connect:Direct Message ID . . .  
SCPA000I  
Character value  
Bottom  
F13=How to use this display  
F3=Exit  
F4=Prompt  
F5=Refresh  
F12=Cancel  
F24=More keys  
Sample Message Description  
The following figure shows a sample message description.  
Display C:D Message Description  
System : FRAN  
Message ID . . . . . . . . . : SCPA000I  
Issuing module . . . . . . . : DMCOPYRT  
Copy step successful.  
The process copy step successfully completed.  
The Return-code may be 4, in which case a "Level-4"  
error has occurred in transmitting a PDS. A Level-4  
error indicates that an error was found, but was not  
sufficient to cause termination of the COPY step.  
SYSTEM ACTION: The process continues executing.  
RESPONSE: See the specific member entry in the Connect:Direct  
STAT file for the detailed message id for a Level-  
4 error.  
Press Enter to continue.  
F3=Exit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
150  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A  
CL Program Examples  
The tables provide examples of i5/OS CL Programs using features of Sterling Connect:Direct. These examples  
are stored in a Physical Source File that is restored to the system during installation.  
If PDM is installed, you can then use the WRKMBRPDM command to browse the members.  
i5/OS Compress/Decompress Examples  
Member Name  
Description  
ACMPPDS01  
ACMPPDS02  
AAPROCS  
CDCOMP/CDDECOMP Example Using Selmbr  
CDCOMP/CDDECOMP Example Using Excmbr  
Readme file  
i5/OS Block Mode Transfer Examples  
Member Name  
Description  
ASNDBTBI1  
ASNDBTBN1  
ASNDBTP31  
ASNDBTSN1  
ASNDBTTN1  
ARCVBTBI1  
ARCVBTPN1  
ARCVBTP31  
ARCVBTSN1  
ARCVBTTN1  
ASPLBTTN1  
CDSND Block Mode Transfers Using Integrated File System Binary File  
CDSND Block Mode Transfers Using Native File System  
CDSND Block Mode Transfer to SPLF  
CDSND Block Mode Transfer to Save File  
CDSND Block Mode Transfer Using Native File System to Text File  
CDRCV Block Mode Transfers Using Integrated File System Binary File  
CDRCV Block Mode Transfer to SPLF  
CDRCV Block Mode Transfer to SPLF  
CDRCV Block Mode Transfer to Save File  
CDRCV Block Mode Transfer Using Native File System to Text File  
CDSNDSPL Block Mode Transfer Using Native File System  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
152  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
i5/OS Run Task Example  
Member Name  
Description  
ARNJDS01  
CDRUNTASK Example  
i5/OS Send Example Using Send File Field Description  
Member Name  
Description  
ASNDCF1A  
CDSND Using SNDFFD Parameter  
i5/OS Send and Receive Examples Using Native File System  
Member Name  
Description  
ASNDCR1A  
CDSND Physical Source File  
ASNDCRIA.$  
ASNDCR1B  
CDSND Physical Data File  
ASNDCR1D  
ASNDCRID.T  
CDSND Physical Source File to Physical Data File  
(PDS)  
ASNDCR1E  
CDSND Multiple Members of Physical Source File  
ASNDCR1F  
ASNDCRIF.1  
CDSND Physical Source File to Spool File  
Spool File (B G)  
ASNDCR1G1  
ASNDCR1N  
ASNDCR2A  
CDSND Physical Data File to Spool File  
CDSND Save File to Save File  
CDSND Precompressed File  
ASNDCR2E  
4D, 4E  
CDSND Multiple Member Precompressed File  
EXO1  
ARCVCR1A  
CDRCV Physical Source File  
ARCVCRIA.S  
ARCVCR1B  
CDRCV Physical Data File  
ARCVCR1D  
CDRCV Physical Source File to Physical Data File  
ARCVCRID.1, 3  
ARCVCR1E  
ARCVCR1F  
ARCVCR1G1  
ARCVCR1N  
ARCVCR2A  
ARCVCR4A  
CDRCV Multiple Members of Physical Source File  
CDRCV Physical Source File to Spool File  
CDRCV Physical Data File to Spool File  
CDRCV Save File to Save File  
CDRCV Precompressed File  
CDRCV Multiple Member Precompressed File  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
CL Program Examples  
153  
i5/OS Send and Receive Examples Using Integrated File System  
Member Name  
Description  
ASNDIFI1A  
CDSND /QSYS Text  
CDSND /QSYS Binary  
ASNDIFI1B  
ASNDIFI1B.D  
ASNDIFI1J  
CDSND /QOpenSys  
ASNDIFI1J.D  
ASNDIFI1K  
ASNDIFI1KB  
ASNDIFI1L  
ASNDIFN1A  
ASNDIFN1J  
ASNDIFN1JB  
ASNDIFN1KB  
ASNDIFN1M  
ASNDIFN1N  
ASNDIFN1P  
ASNDIFS1C  
ASNDIFS1J  
ASNDIFS1K  
ASNDIFS1P  
ASNDIF01A  
ASNDIF01J  
ASNDIF01K  
ASNDIF01L  
ARCVIFI1A  
ARCVIFI1B  
ARCVIFI1J  
CDSND /root  
CDSND /root and block size specified  
CDSND Binary to Text File  
CDSND Integrated File System to Native /QSYS  
CDSND Integrated File System to Native /QOpenSys  
CDSND Integrated File System to Native /QOpenSys, Using Blocksize  
CDSND Integrated File System to Native /root, Using Blocksize  
CDSND Integrated File System to Native /root Binary File to Binary File  
CDSND Integrated File System to Native /QOpenSys  
CDSND Integrated File System to Native /QDLS  
CDSND Integrated File System /QSYS to SPLF  
CDSND Integrated File System /QOpenSYS to SPLF  
CDSND Integrated File System /root to SPLF  
CDSND Integrated File System /QDLS to SPLF  
CDSND NATIVE File System to Integrated File System /QSYS  
CDSND Native File System to Integrated File System /QOpenSys  
CDSND Native File System to Integrated File System /root  
CDSND Native File System to Integrated File System /QDLS  
CDSND /QSYS Text  
CDSND /QSYS Binary  
CDSND /QOpenSys  
ARCVIFI1K  
ARCVIFI1KB  
ARCVIFI1L  
ARCVIFN1A  
ARCVIFN1J  
ARCVIFN1JB  
ARCVIFN1KB  
ARCVIFN1M  
ARCVIFN1N  
CDSND /root  
CDSND /root and Blocksize Specified  
CDSND /QDLS Binary to Text File  
CDSND Integrated File System to Native /QSYS  
CDSND Integrated File System to Native /QOpenSys  
CDSND Integrated File System to Native /QOpenSys, Using Blocksize  
CDSND Integrated File System to Native /root, Using Blocksize  
CDSND Integrated File System to Native /root Binary File to Binary File  
CDSND Integrated File System to Native /QOpenSys  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
154  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Member Name  
Description  
ARCVIFN1P  
ARCVIFS1C  
ARCVIFS1J  
ARCVIFS1K  
ARCVIFS1P  
ARCVIF01A  
ARCVIF01J  
ARCVIF01K  
ARCVIF01L  
ASPLIF0SC  
ASPLIF0SJ  
ASPLIF0SK  
ASPLIF0SP  
CDSND Integrated File System to Native /QDLS  
CDSND Integrated File System /QSYS to SPLF  
CDSND Integrated File System /QOpenSYS to SPLF  
CDSND Integrated File System /root to SPLF  
CDSND Integrated File System /QDLS to SPLF  
CDSND NATIVE File System to Integrated File System /QSYS  
CDSND Native File System to Integrated File System /QOpenSys  
CDSND Native File System to Integrated File System /root  
CDSND Native File System to Integrated File System /QDLS  
CDSNDSPL to Integrated File System /QSYS  
CDSNDSPL to Integrated File System /QOpenSys  
CDSNDSPL to Integrated File System /root  
CDSNDSPL to Integrated File System /QDLS  
i5/OS–z/OS Send and Receive Examples  
Member Name  
Description  
MRCVCFGDG  
MRCVCFPDS1  
MRCVCRKFD1  
MRCVCRKFD5  
MRCVCRKFI4  
MRCVCRKFP4  
MRCVCRKVS1  
MRCVCRSAVF  
MRCVCRSFI2  
MRCVCRSVI2  
MRCVEBCX1  
MSNDCFGDG  
MSNDCFPDS1  
MSNDCF01D  
MSNDCRKFB1  
MSNDCRKFD5  
MSNDCRKFI6  
MSNDCRKVS1  
CDRCV GDG Files from z/OS  
CDRCV PDS File  
CDRCV KSDS File  
CDRCV KSDS File Using Blocksize  
CDRCV Using Integrated File System  
CDRCV KSDS to SPLF  
CDRCV KSDS VB File to Physical Source File (Records are padded)  
CDRCV Save File  
CDRCV Using Integrated File System /root  
CDRCV Using Integrated File System /root  
CDRCV Extended Translation to Integrated File System  
CDSND to z/OS GDG  
CDSND to z/OS PDS  
CDSND of Physical Source File  
CDSND of Physical Data Binary File to KSDS  
CDSND of Physical Data File to KSDS Using Blocksize Parameter  
CDSND Using Integrated File System /root  
CDSND to VB KSDS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
CL Program Examples  
155  
Member Name  
Description  
MSNDCRSAVF  
MSNDCRSFI2  
MSNDCRSFS1  
MSNDDBCS01  
MSNDIF01K  
CDSND Save File to Save File  
CDSND to VB File from Integrated File System /root  
CDSND from Physical Source to z/OS Physical Sequential CLP  
CDSND DBCS File  
CDSND from Integrated File System /root  
CDSND/CDRCV with *EXT Compression  
CDSND JCL to z/OS READER Using SPOOL TRANSFER OPTION  
CDSNDSPL to z/OS KSDS  
MSNDRCVPS3  
MSNDRDR  
MSPLCRKFP4  
i5/OS–NT Send and Receive Examples  
Member Name  
Description  
NRCVCF01A  
NRCVCF01H  
NRCVCF01I  
NRCVCF01J  
NRCVIF01A  
NRCVIF01B  
NRCVIF01C  
NRCVIF01H  
NRCVIF01I  
NRCVIF01J  
NRCVIF01K  
NRCVIF01L  
NRCVIF01M  
NRCVIF01N  
NRCVIF01P  
NRCVIF01Q  
NSNDCF01A  
NSNDCF01H  
NSNDCF01I  
NSNDIF01A  
NSNDIF01C  
NSNDIF01H  
NSNDIF01I  
CDRCV into Physical Source File  
CDRCV Text File to Physical Data File  
CDRCV Binary File to Physical Data File  
CDRCV Binary File to Save File  
CDRCV to Integrated File System /QSYS  
CDRCV to Integrated File System /QSYS Physical Data File  
CDRCV of Binary File to Integrated File System /QSYS  
CDRCV of Text File to Integrated File System  
CDRCV of Binary File to Integrated File System  
CDRCV of File to Integrated File System /QOpenSys  
CDRCV to Integrated File System /root  
CDRCV of Binary File to Integrated File System /root  
CDRCV of Binary File to /QOpenSys  
CDRCV of Binary File to /QDLS  
CDRCV to Integrated File System /root  
CDRCV to Integrated File System to /QDLS  
CDSND of Physical Source File Using Native File System  
CDSND of Physical Data to Text File Using Native File System  
CDSND of Physical Data File to Binary Using Native File System  
CDSND Using Integrated File system /QSYS  
CDSND Using Integrated File System /QSYS Physical Data File  
CDSND Using Integrated File System to Text File  
CDSND Using Integrated File System to Binary File  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
156  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Member Name  
Description  
NSNDIF01J  
NSNDIF01K  
NSNDIF01L  
NSNDIF01M  
NSNDIF01N  
NSNDIF01P  
CDSND Using Integrated File System /QOpenSys  
CDSND Using Integrated File System /root  
CDSND Using Integrated File System /QDLS  
CDSND Using Integrated File System /root and Binary File  
CDSND Using Integrated File System /QOpenSys and Binary File  
CDSND Using Integrated File System /QDLS and Binary File  
i5/OS–Microsoft Windows Run Job and Run Task Examples  
Member Name  
Description  
NRNJOB01A  
NRNJOB01B  
NRNJOB01C  
NRNTDL01A  
NSBMCF01A  
CDRUNJOB Without Desktop Parameter, UNC names  
CDRUNJOB Without Desktop Parameter, C: names  
CDRUNJOB With Desktop Parameter, NT 1.3.00  
CDRUNTASK to Delete Data Set  
CDSUBMIT an NT copy Process  
i5/OS–UNIX Send and Receive Examples  
Member Name  
Description  
URCVCF01A  
URCVCF01B  
URCVCF01C  
URCVCF01D  
URCVIF01A  
URCVIF01C  
URCVIF01D  
URCVIF01J  
URCVIF01K  
URCVIF01L  
URCVIF01M  
URCVIF01N  
URCVIF01Q  
USNDCF01A  
CDRCV Using Native File System into Physical Source File  
CDRCV Using Native File System Binary File into save File  
CDRCV Using Native File System Binary to Physical Data File  
CDRCV Using Native File System Text File to Physical Data File  
CDRCV Using Integrated File System /QSYS  
CDRCV Using Integrated File System /QSYS and Binary File  
CDRCV Using Integrated File System /QSYS and Text File  
CDRCV Using Integrated File System /QOpenSys  
CDRCV Using Integrated File System /root  
CDRCV Using Integrated File System /root and Binary File  
CDRCV Using Integrated File System /QOpenSys and Binary File  
CDRCV Using Integrated File System /QDLS and Binary File  
CDRCV Using Integrated File System and /QDLS  
CDSND of Physical Source File  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
CL Program Examples  
157  
Member Name  
Description  
USNDCF01H  
USNDCF01I  
USNDCF01S  
USNDIF01A  
USNDIF01H  
USNDIF01I  
USNDIF01J  
USNDIF01K  
USNDIF01L  
USNDIF01M  
USNDIF01N  
USNDIF01P  
CDSND of Physical Data Text File  
CDSND of Physical Data Binary File  
CDSND of Save File  
CDSND of Physical Source File Using Integrated File System /QSYS  
CDSND of Physical Data File Using Integrated File System /QSYS  
CDSND of Physical Data Binary File Using Integrated File System /QSYS  
CDSND of Text File Using Integrated File System /QOpenSys  
CDSND of Text File Using Integrated File System /root  
CDSND of Text File Using Integrated File System/QDLS  
CDSND of Binary File Using Integrated File System/root  
CDSND of Binary File Using Integrated File System /QOpenSys  
CDSND of Binary File Using Integrated  
i5/OS–UNIX Run Task and Run Job Examples  
Member Name  
Description  
URNJOB01A  
URNTDL01A  
URNTDL02A  
USBMCF01A  
CDRUNJOB to List Directory  
CDRUNTASK to List Directory  
CDRUNTASK to List Directory  
CDSUBMIT a UNIX copy Process  
i5/OS–UTIL Test Examples  
Member Name  
Description  
AABNDCL  
Creates loopback test nodes  
CD$RETRO  
CD$RETRO$  
cmd - execute several loopback tests  
pgm - execute several loopback tests  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
158  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices  
This information was developed for products and services offered in the U.S.A.  
IBM may not offer the products, services, or features discussed in this document in other  
countries. Consult your local IBM representative for information on the products and  
services currently available in your area. Any reference to an IBM product, program, or  
service is not intended to state or imply that only that IBM product, program, or service may  
be used. Any functionally equivalent product, program, or service that does not infringe any  
IBM intellectual property right may be used instead. However, it is the user's responsibility  
to evaluate and verify the operation of any non-IBM product, program, or service.  
IBM may have patents or pending patent applications covering subject matter described in  
this document. The furnishing of this document does not grant you any license to these  
patents. You can send license inquiries, in writing, to:  
IBM Director of Licensing  
IBM Corporation  
North Castle Drive  
Armonk, NY 10504-1785  
U.S.A.  
For license inquiries regarding double-byte character set (DBCS) information, contact the  
IBM Intellectual  
Property Department in your country or send inquiries, in writing, to:  
Intellectual Property Licensing  
Legal and Intellectual Property Law  
IBM Japan Ltd.  
1623-14, Shimotsuruma, Yamato-shi  
Kanagawa 242-8502 Japan  
The following paragraph does not apply to the United Kingdom or any other country  
where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS  
MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
159  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notices  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do  
not allow disclaimer of express or implied warranties in certain transactions, therefore, this  
statement may not apply to you.  
This information could include technical inaccuracies or typographical errors. Changes are  
periodically made to the information herein; these changes will be incorporated in new  
editions of the publication. IBM may make improvements and/or changes in the product(s)  
and/or the program(s) described in this publication at any time without notice.  
Any references in this information to non-IBM Web sites are provided for convenience  
only and do not in any manner serve as an endorsement of those Web sites. The materials  
at those Web sites are not part of the materials for this IBM product and use of those Web  
sites is at your own risk.  
IBM may use or distribute any of the information you supply in any way it believes  
appropriate without incurring any obligation to you.  
Licensees of this program who wish to have information about it for the purpose of  
enabling: (i) the exchange of information between independently created programs and  
other programs (including this one) and (ii) the mutual use of the information which has  
been exchanged, should contact:  
IBM Corporation  
J46A/G4  
555 Bailey Avenue  
San Jose, CA__95141-1003  
U.S.A.  
Such information may be available, subject to appropriate terms and conditions, including  
in some cases, payment of a fee.  
The licensed program described in this document and all licensed material available for it  
are provided by IBM under terms of the IBM Customer Agreement, IBM International  
Program License Agreement or any equivalent agreement between us.  
Any performance data contained herein was determined in a controlled environment.  
Therefore, the results obtained in other operating environments may vary significantly.  
Some measurements may have been made on development-level systems and there is no  
guarantee that these measurements will be the same on generally available systems.  
Furthermore, some measurements may have been estimated through extrapolation. Actual  
results may vary. Users of this document should verify the applicable data for their specific  
environment.  
Information concerning non-IBM products was obtained from the suppliers of those  
products, their published announcements or other publicly available sources. IBM has not  
tested those products and cannot confirm the accuracy of performance, compatibility or any  
other claims related to non-IBM products. Questions on the capabilities of non-IBM  
products should be addressed to the suppliers of those products.  
All statements regarding IBM's future direction or intent are subject to change or  
withdrawal without notice, and represent goals and objectives only.  
160  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices  
This information is for planning purposes only. The information herein is subject to change  
before the products described become available. This information contains examples of  
data and reports used in daily business operations. To illustrate them as completely as  
possible, the examples include the names of individuals, companies, brands, and products.  
All of these names are ficticious and any similarity to the names and addresses used by an  
actual business enterprise is entirely coincidental.  
COPYRIGHT LICENSE:  
This information contains sample application programs in source language, which illustrate  
programming techniques on various operating platforms. You may copy, modify, and  
distribute these sample programs in any form without payment to IBM, for the purposes of  
developing, using, marketing or distributing application programs conforming to the  
application programming interface for the operating platform for which the sample  
programs are written. These examples have not been thoroughly tested under all conditions.  
IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these  
programs. The sample programs are provided "AS IS", without warranty of any kind. IBM  
shall not be liable for any damages arising out of your use of the sample programs.  
Each copy or any portion of these sample programs or any derivative work, must include a  
copyright notice as follows:  
© IBM 2011. Portions of this code are derived from IBM Corp. Sample Programs.  
© Copyright IBM Corp. 2011.  
If you are viewing this information softcopy, the photographs and color illustrations may  
not appear.  
Trademarks  
The following terms are trademarks of the International Business Machines Corporation in  
the United States, other countries, or both: http://www.ibm.com/legal/copytrade.shtml.  
Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks  
or trademarks of Adobe Systems Incorporated in the United States, and/or other countries.  
IT Infrastructure Library is a registered trademark of the Central Computer and  
Telecommunications Agency which is now part of the Office of Government Commerce.  
Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron,  
Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks  
of Intel Corporation or its subsidiaries in the United States and other countries.  
Linux is a registered trademark of Linus Torvalds in the United States, other countries, or  
both.  
Microsoft Windows, Microsoft Windows NT, and the Microsoft Windows logo are  
trademarks of Microsoft Corporation in the United States, other countries, or both.  
ITIL is a registered trademark, and a registered community trademark of the Office of  
Government Commerce, and is registered in the U.S. Patent and Trademark Office.  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
161  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices  
UNIX is a registered trademark of The Open Group in the United States and other  
countries.  
Java and all Java-based trademarks and logos are trademarks or registered trademarks of  
Oracle and/or its affiliates.  
Cell Broadband Engine is a trademark of Sony Computer Entertainment, Inc. in the United  
States, other countries, or both and is used under license therefrom.  
Linear Tape-Open, LTO, the LTO Logo, Ultrium and the Ultrium Logo are trademarks of  
HP, IBM Corp. and Quantum in the U.S. and other countries.  
Connect Control Center®, Connect:Direct®, Connect:Enterprise, Gentran®,  
Gentran:Basic®, Gentran:Control®, Gentran:Director®, Gentran:Plus®,  
Gentran:Realtime®, Gentran:Server®, Gentran:Viewpoint®, Sterling Commerce™,  
Sterling Information Broker®, and Sterling Integrator® are trademarks or registered  
trademarks of Sterling Commerce, Inc., an IBM Company.  
Other company, product, and service names may be trademarks or service marks of others.  
162  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
A
Adjacent Node  
An adjacent node is an entry in the Network Map that defines a Sterling Connect:Direct node with which the  
local Sterling Connect:Direct node can communicate. The adjacent node is also referred to as a remote node.  
Application Program Interface (API)  
The Application Program Interface (API) is a Sterling Connect:Direct component that accepts commands and  
places them in an executable format.  
Asynchronous  
Asynchronous Process execution occurs when the system starts the job. The CDSUBPROC command  
execution is asynchronous.  
C
Checkpoint Restart  
The Checkpoint Restart feature eliminates the need to retransmit an entire file in the event of a transmission  
failure. If a copy procedure is interrupted, Sterling Connect:Direct restarts that copy at the last checkpoint.  
Command Line Interface  
The Command Line Interface is a Sterling Connect:Direct interface that allows users to submit Sterling  
Connect:Direct Processes and commands from their native command line environment.  
Commands  
Sterling Connect:Direct commands initiate and monitor activity within the Sterling Connect:Direct system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
164  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
I
Integrated File System  
The integrated file system provides an integrated structure of all stored information. This file system provides  
stream files, directory structure accessed by path, and a user and application interface that accesses all  
information stored in the i5/OS.  
L
Local Node  
The local node is the Sterling Connect:Direct server on which the Process is submitted. The local node may  
also be referred to as the primary node, controlling node or initiating node, but should not necessarily be  
interpreted as the sending node, since PNODE can be the receiver. In every Process, there is one local  
(PNODE) and one remote (SNODE) specified. The submitter of a Process is always the PNODE.  
Local Process  
A local Process is a Sterling Connect:Direct Process initiated on the local Sterling Connect:Direct for i5/OS  
node.  
N
Native File System  
The native file system accepts the file name in the following formats: library-name/file-name and  
library-name/file-name(member-name).  
Network Map (Netmap)  
The Network Map (netmap) is a file that identifies all valid Sterling Connect:Direct nodes in the network. One  
Network Map is associated with each Sterling Connect:Direct local node. The netmap has one entry for each of  
the other Sterling Connect:Direct nodes to which the local Sterling Connect:Direct node communicates. The  
netmap entries also contain the rules or protocol that the nodes adhere to when communicating.  
Node  
A node is any site in a network from which information distribution can be initiated.  
P
Permanent Session Managers  
Permanent Session Managers are reusable session managers submitted when Sterling Connect:Direct is started  
or when the Sterling Connect:Direct administrator increases the number of permanent session managers.  
Primary Node (PNODE)  
The local node or primary node (PNODE) is the Sterling Connect:Direct node on which the Process is  
submitted. The primary node may also be referred to as the controlling node or initiating node, but should not  
Download from Www.Somanuals.com. All Manuals Search And Download.  
165  
necessarily be interpreted as the sending node, since PNODE can be the receiver. In every Process, there is one  
local (PNODE) and one remote (SNODE) specified. The submitter of a Process is always the PNODE.  
Process  
A Process is a series of statements that initiate Sterling Connect:Direct activity, such as copying files, and  
running jobs.  
Process Management Queue  
The Process Management Queue (PMQ) holds information about Sterling Connect:Direct Processes that are  
currently executing or scheduled to execute in the future.  
Process Manager (PMGR)  
The Process Manager initiates and manages the Sterling Connect:Direct environment.  
Process Statements  
Process Statements are instructions for transferring files, running operating system jobs, executing programs,  
or submitting other Sterling Connect:Direct Processes. They are used to build a Sterling Connect:Direct  
Process.  
Q
Queue Manager (QMGR)  
The Queue Manager is a fixed Sterling Connect:Direct for i5/OS component. The Process Manager starts the  
Queue manager when it starts Sterling Connect:Direct, and the QMGR remains active while Sterling  
Connect:Direct is active. The Queue Manager has five logical queues: ACTIVQ, executing processes;  
WAITQ, processes waiting to run; HOLDQ, processes currently held; TIMERQ, processes waiting to be  
moved to the WAITQ; and STARTQ, asynchronous processes being activated.  
R
Remote Node  
A remote node is an entry in the Network Map that defines a Sterling Connect:Direct node with which the local  
Sterling Connect:Direct node can communicate. The remote node is also referred to as an adjacent node.  
Remote Process  
A remote Process is a Sterling Connect:Direct Process initiated on the remote Sterling Connect:Direct node.  
Retry Interval  
The retry interval is the interval at which retries are performed as a part of the checkpoint-restart feature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
166  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
S
Secondary Node (SNODE)  
The remote or secondary node (SNODE) is the Sterling Connect:Direct node that interacts with the primary  
node (PNODE) during Process execution. SNODE may also be referred to as the participating  
(non-controlling) or partner node. Every Process has one PNODE and one SNODE.  
Session Manager (SMGR)  
The session manager component executes the Sterling Connect:Direct Processes. You can set the initialization  
parameters to make the SMGR either fixed or dynamic.  
Spool Monitor (CDSPLMON)  
The Sterling Connect:Direct Spool Monitor (CDSPLMON) is a variable component of Sterling Connect:Direct  
for i5/OS. CDSPLMON uses Spool Monitor entries to associate output queues with destination Sterling  
Connect:Direct nodes. These entries also include default values used to transfer spooled files.  
Statistics Facility  
The Sterling Connect:Direct Statistics Facility records Sterling Connect:Direct activities.  
Statistics File  
The statistics file holds Sterling Connect:Direct statistics records that document the history of a Process.  
Statistics Manager (STATMGR)  
Sterling Connect:Direct for i5/OS logs statistics information for all Sterling Connect:Direct Processes. Each  
component of Sterling Connect:Direct for i5/OS generates statistics data to the statistics manager  
(STATMGR). The long-running STATMGR formats the statistics information and writes it to the statistics  
file.  
Submitted Session Managers are session managers submitted by the Process Manager.  
Synchronous  
Synchronous Process execution occurs when you submit a Sterling Connect:Direct command. Processes such  
as CDSND and CDRCV are submitted by the user and they execute immediately.  
T
TCP/IP Listener  
The TCP/IP Listener component requests session managers from the Process Manager when it receives  
connection requests. The Process Manager starts and controls the TCPLIST component.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
167  
Timer Queue (TIMER)  
This Sterling Connect:Direct for i5/OS component provides timer services to the other components. The  
process manager submits and controls the TIMER. The TIMER is always present when Sterling  
Connect:Direct is active.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
168  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
A
Administration Menu  
CDDECOMP command  
asynchronous execution  
asynchronous processes  
B
CDRCV command  
block mode transfer  
C
CDCOMP command  
Download from Www.Somanuals.com. All Manuals Search And Download.  
170  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
CDSELSTAT command  
CDRUNTASK command  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
171  
CDSUBMIT command  
Download from Www.Somanuals.com. All Manuals Search And Download.  
172  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
CDSUBPROC command  
command level  
commands  
checkpointing  
CHLVAL  
CL commands  
COMPRESS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
173  
commands  
EXCMBR  
CRC parameter  
F
FALIAS  
D
Digital Signature  
E
encryption value  
files  
examples  
Download from Www.Somanuals.com. All Manuals Search And Download.  
174  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
FPDSDIR  
M
messages  
H
N
help option  
NEWNAME  
O
I
OUTFILE  
INFILE  
P
interface  
parameters  
J
JOBFILE parameter  
L
LINK parameter  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
175  
PNUM parameter  
Process Management Queue  
prompt option  
TSYSOPTS  
PUSER parameter  
PCLASS parameter  
PERIOD parameter  
Q
PHOLD parameter  
Download from Www.Somanuals.com. All Manuals Search And Download.  
176  
IBM Sterling Connect:Direct for i5/OS User’s Guide  
queues  
R
RCDTYPE parameter  
receiving files  
SELMBR parameter  
SNDFFD parameter  
RMTNODE parameter  
CDRUNJOB command  
parameters  
RMTWORK parameter  
CDRUNTASK command  
parameters  
CDRUNTASK command  
parameters  
S
CDSND command  
screens  
Source Edit Utility (SEU)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
177  
starting  
TEXTFILE parameter  
STARTT parameter  
statistics  
TIMERQ  
Status messages  
TLINK parameter  
Sterling Connect:Direct CL commands  
Sterling Connect:Direct messages  
Sterling Connect:Direct Secure Plus  
TVSAMCAT parameter  
TYPE parameter  
T
U
File Systems  
Integrated File System  
UNIXtype file system 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Groupe SEB USA T FAL Scale Electronic Bathroom Scales User Manual
Haier Refrigerator hc125fvs User Manual
Harbor Freight Tools Drill 40209 User Manual
Harman Stove Company Electric Heater R16 User Manual
Honeywell Door 6150RF User Manual
Husqvarna Chainsaw 268 XP User Manual
IBM Computer Drive 28L2234 User Manual
Imation Printer 134000 User Manual
Impex Fitness Equipment mp 6000 User Manual
Impex Fitness Equipment TPL 48 User Manual