FUNAI Blu ray Player MBP5130 F7 User Manual

Owner’s Manual  
MBP5130/F7  
Blu-ray Disc / DVD Player  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2010 Funai Electric Co., Ltd.  
RADIO-TV INTERFERENCE  
IMPORTANT COPYRIGHT INFORMATION  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if  
not installed and used in accordance with the  
instructions, may cause harmful interference  
to radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning  
the equipment off and on, the user is encouraged  
to try to correct the interference by one or more  
of the following measures:  
Unauthorized copying, broadcasting, public  
performance and lending of discs are prohibited.  
This item incorporates copy protection  
technology that is protected by U.S. patents  
and other intellectual property rights of  
Rovi Corporation. Reverse engineering and  
disassembly are prohibited.  
Do not place the unit on the furniture that is  
capable of being tilted by a child and an adult  
leaning, pulling, standing or climbing on it. A  
falling unit can cause serious injury or even  
death.  
This apparatus should not be placed in a built-in  
installation such as a bookcase or rack unless  
proper ventilation is provided.  
Make sure to leave a space of 3.9 inches (10cm)  
or more around this apparatus.  
1) Reorient or relocate the receiving antenna.  
2) Increase the separation between the  
equipment and receiver.  
To Avoid the Hazards of Electrical Shock and  
Fire  
3) Connect the equipment into an outlet on  
a circuit different from that to which the  
receiver is connected.  
• Do not handle the AC power cord with wet  
hands.  
4) Consult the dealer or an experienced radio/  
TV technician for help.  
• Do not pull on the AC power cord when  
disconnecting it from an AC outlet. Grasp it by  
the plug.  
• Do not put your fingers or objects into the unit.  
Location and Handling  
• Do not install the unit in direct sunlight, near  
strong magnetic fields, or in a place subject to  
dust or strong vibration.  
• Avoid a place with drastic temperature changes.  
• Install the unit in a horizontal and stable  
position. Do not place anything directly on  
top or bottom of the unit. Depending on your  
external devices, noise or disturbance of the  
picture and/or sound may be generated if the  
unit is placed too close to them. In this case,  
please ensure enough space between the  
external devices and the unit.  
• Depending on the environment, the  
temperature of this unit may increase slightly.  
This is not a malfunction.  
• Be sure to remove the disc and unplug the AC  
power cord from the outlet before carrying the  
unit.  
This Class B digital apparatus complies with  
Canadian ICES-003.  
Cet appareil numérique de la classe B est  
conforme à la norme NMB-003 du Canada.  
Disconnect the mains plug to shut off when find  
trouble or not in use. The mains plug shall remain  
readily operable.  
CAUTION: Danger of explosion if battery is  
incorrectly replaced. Replace only  
with the same or equivalent type.  
WARNING: Batteries (Battery pack or battery  
installed) shall not be exposed to  
excessive heat such as sunshine,  
fire, or the like.  
LASER SAFETY  
This apparatus employs a laser. Only a qualified  
service person should remove the cover or  
attempt to service this apparatus, due to possible  
eye injury.  
CAUTION: Use of controls or adjustments or  
performance of procedures other  
than those specified herein may  
result in hazardous radiation  
exposure.  
Dew Condensation Warning  
• Dew condensation may form inside the unit in  
the following conditions. If so, do not use this  
unit at least for a few hours until its inside gets  
dry.  
CAUTION: Laser radiation when open. Do not  
stare into beam.  
LOCATION: Inside, near the BD mechanism.  
- The unit is moved from a cold place to a warm  
place.  
- Under conditions of high humidity.  
- After heating a cold room.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Note about Recycling  
© 2010 Funai Electric Co., Ltd.  
• This unit’s packaging materials are recyclable  
and can be reused. Please dispose  
of any materials in accordance with  
your local recycling regulations.  
• Batteries should never be thrown  
away or incinerated but disposed  
of in accordance with your local regulations  
concerning chemical wastes.  
All rights reserved. No part of this manual may be  
reproduced, copied, transmitted, disseminated,  
transcribed, downloaded or stored in any storage  
medium, in any form or for any purpose without  
the express prior written consent of Funai.  
Furthermore, any unauthorized commercial  
distribution of this manual or any revision hereto  
is strictly prohibited.  
Notice for Progressive Scan Output  
Information in this document is subject to change  
without notice. Funai reserves the right to change  
the content herein without the obligation to  
notify any person or organization of such changes.  
with the design is a registered trademark of  
Funai Electric Co., Ltd. and may not be used in any way  
without the express written consent of Funai. All other  
trademarks used herein remain the exclusive property  
of their respective owners. Nothing contained in this  
manual should be construed as granting, by implication  
or otherwise, any license or right to use any of the  
trademarks displayed herein. Misuse of any trademarks  
or any other content in this manual is strictly prohibited.  
Funai shall aggressively enforce its intellectual property  
rights to the fullest extent of the law.  
• Consumers should note that not all high  
definition television sets are fully compatible  
with this product and may cause artifacts to  
be displayed in the picture. In case of picture  
problems with 480 progressive scan output,  
it is recommended that the user switch the  
connection to the ‘standard definitionoutput.  
If there are questions regarding your TV set  
compatibility with this 480p BD/DVD player,  
please contact our customer service center.  
ENERGY STAR® is a joint program of  
the U.S. Environmental Protection  
Agency and the U.S. Department of  
Energy helping us all save money  
and protect the environment  
through energy efficient products  
and practices.  
Supplied Accessories  
• Remote Control (NB904UD/NB954UD)  
• Batteries (AAA, 1.5V × 2)  
• Audio / video cables  
• Quick Start Guide  
• Wireless Network Connection Guide  
• VUDU sheet  
• Netflix Box-insert  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Watching Streaming Movies ..........................................25  
Blockbuster Operations.......................................................26  
Before Activating the Connection to  
Blockbuster...........................................................................26  
Activating the Connection to Blockbuster................26  
Guide to Blockbuster Menu Screen .............................26  
Renting or Purchasing Movies / TV Episodes...............26  
Searching Movies / TV Episodes....................................27  
Watching Rented or Purchased Movies /  
TV Episodes...........................................................................27  
VUDU Operations...................................................................27  
Before Activating VUDU...................................................27  
Activating VUDU.................................................................27  
Guide to VUDU Menu Screen.........................................28  
Renting or Purchasing VUDU Movies /  
TV Episodes...........................................................................28  
Watching Rented or Purchased VUDU Movies / TV  
Episodes.................................................................................29  
Using Internet Applications ...............................................29  
FUNCTION SETUP..........................................................29  
Quick......................................................................................29  
Custom..................................................................................30  
Language ..........................................................................30  
Video....................................................................................30  
Audio ..................................................................................31  
HDMI Audio Out Setting..................................................32  
Digital Out Setting .............................................................32  
Speaker Setting (Available when you have HDMI  
cable connected to HDMI OUT jack) ...........................33  
Parental................................................................................35  
Others ...............................................................................36  
fun-Link (HDMI CEC)..........................................................38  
Network Connection ............................................................39  
Connection Test ..................................................................39  
Network Selection..............................................................39  
Software Update.................................................................43  
Current Version....................................................................43  
Initialize .....................................................................................44  
OTHERS .............................................................................45  
Troubleshooting.....................................................................45  
Language Code List...............................................................48  
Servicing ...................................................................................48  
Specifications ..........................................................................49  
NETWORK SERVICE DISCLAIMER .............................49  
Network Service Disclaimer ...............................................49  
ESPAÑOL...........................................................................50  
Discos Reproducibles ...........................................................50  
Discos y Archivos Reproducibles ..................................50  
Códigos de Región.............................................................50  
Encontrar el Canal de Vídeo en su Televisor.................50  
Ajusta el idioma para el menú del  
CONTENTS  
INTRODUCTION................................................................2  
Safety Instructions................................................................... 2  
Supplied Accessories.............................................................. 4  
Trademark Information.......................................................... 6  
Front Panel ................................................................................. 7  
Rear Panel................................................................................... 7  
Remote Control ........................................................................ 8  
Installing the Batteries in the Remote Control.............. 9  
Opening Screen........................................................................ 9  
CONNECTIONS ...............................................................10  
Connection to the TV............................................................10  
Connection to an Audio System.......................................11  
2-Channel Analog Audio Connection.........................11  
Digital Audio Connection................................................11  
HDMI Audio Connection..................................................11  
Connection to the Network ...............................................12  
Wired Connection..................................................................12  
Wireless Connection.............................................................13  
Finding the Video Channel on Your TV...........................13  
PLAYBACK.........................................................................14  
Information on Playback.....................................................14  
Playable Discs and Files....................................................14  
Unplayable Discs and Files..............................................14  
Region Codes.......................................................................15  
On-Screen Display..............................................................15  
How to Insert a Disc ..............................................................15  
Reading the SD Memory Card...........................................16  
Selecting the Media Mode .................................................16  
Playing Back (BD / DVD/ Disc with AVCHD Files)........16  
Using the Title / Disc / Pop-up Menu..............................17  
Playing Back (Audio CD / Windows Media TM Audio /  
JPEG Files).................................................................................17  
KODAK Picture CD .................................................................18  
Fast Forward / Fast Reverse................................................19  
Slow Forward Playback........................................................19  
Step by Step Playback..........................................................19  
Repeat Playback .....................................................................19  
Program Playback..................................................................19  
Random Playback ..................................................................20  
Rapid Playback........................................................................21  
Adjusting the Picture............................................................21  
Virtual Surround.....................................................................21  
PIP (BONUSVIEW) Setting ...................................................22  
Camera Angle..........................................................................22  
Enjoying BD-Live Discs with Internet .............................22  
Search.........................................................................................23  
Using [the Number buttons] (Direct Search) ...............23  
Switching Subtitles................................................................23  
Switching Audio Soundtrack.............................................24  
Setting the BD Audio Mode ...............................................24  
NETWORK OPERATIONS..............................................25  
Netflix Operations..................................................................25  
Before Activating the Connection to Netflix ............25  
Activating the Connection to Netflix...........................25  
reproductor..............................................................................50  
Reproducción Directa...........................................................51  
LIMITED WARRANTY....................................back cover  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Trademark Information  
“AVCHDand the  
“AVCHDlogo  
are trademarks  
of Panasonic  
HDMI, the HDMI Logo,  
and High-Definition  
Multimedia Interface are  
trademarks or registered  
trademarks of HDMI  
Licensing LLC in the  
United States and other  
countries.  
Corporation and  
Sony Corporation.  
“BONUSVIEWis  
trademark of Blu-ray  
Disc Association.  
Manufactured under  
license from Dolby  
Laboratories. Dolby and  
the double-D symbol  
are trademarks of Dolby  
Laboratories.  
"BD-Live" and  
"BD-Live" logo are  
trademarks of Blu-ray  
Disc Association.  
VUDUTM is a  
trademark of VUDU,  
Inc.  
Manufactured under  
license under U.S.  
Patent #’s:5,451,942;  
5,956,674; 5,974,380;  
5,978,762; 6,487,535  
& other U.S. and  
worldwide patents  
issued & pending. DTS  
and the Symbol are  
registered trademarks,  
& DTS-HD, DTS-HD  
Advanced Digital Out  
and the DTS logos are  
trademarks of DTS,  
Inc. Product includes  
software. © DTS, Inc. All  
Rights Reserved.  
Netflix and the  
Netflix logo  
are trademarks  
or registered  
trademarks of Netflix,  
Inc.  
BLOCKBUSTER name,  
design and related  
marks are trademarks  
of Blockbuster Inc.  
Java and all Java based  
trademarks and logos  
are trademarks or  
registered trademarks  
of Oracle and/or its  
affiliates.  
“Blu-ray Disc“ and  
are trademarks.  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
Windows Media and  
the Windows logo  
are trademarks or  
registered trademarks  
of Microsoft  
Kodak and KODAK Picture CD  
Compatible are trademarks  
of Kodak used under license.  
Corporation in the  
United States and/or  
other countries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Front Panel  
1
2*  
3
4 5 6* 7 8  
STANDBY/ON  
OPEN/CLOSE  
STOP  
PLAY  
SD card  
9
(*) The unit can also be turned on by pressing  
these buttons.  
1. Disc tray  
8. y STANDBY/ON button  
2. A OPEN/CLOSE button*  
3. Infrared sensor window  
4. C STOP button  
• Press to turn on the unit, or to turn the unit  
into the standby mode. (To completely turn  
off the unit, you must unplug the AC power  
cord.)  
5. PLAY indicator  
• This indicator lights up in green when discs or  
SD cards play back.  
• Press and hold for 10 seconds to shut down  
the unit.  
9. SD card slot  
6. B PLAY button*  
7. STANDBY/ON indicator  
• This indicator lights up in red when the power  
is in the standby mode.  
Note  
• This unit will be turned into the standby mode  
automatically after 25 minutes of no action.  
Rear Panel  
2
3
4 5  
6
1
COAXIAL  
L
Wireless LAN  
LAN  
HDMIOUT  
R
AUDIO  
OUT  
VIDEO  
OUT  
7
1. AC power cord  
2. LAN terminal  
Note  
• Do not touch the inner pins of the jacks on the  
rear panel. Electrostatic discharge may cause  
permanent damage to the unit.  
• This unit does not have the RF modulator.  
• Do not try to rip the internal wireless LAN from  
the unit.  
3. HDMI OUT jack  
4. AUDIO OUT jacks  
5. DIGITAL OUT (COAXIAL) jack  
6. Wireless LAN (Internal)  
7. VIDEO OUT jack  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Remote Control  
8. H (skip) button  
• During playback, press once to return to the  
beginning of the current title, chapter or  
track.  
• During playback, press twice to return to the  
previous title, chapter or track.  
• During the JPEG playback, press to return to  
the previous file.  
STANDBY/ON  
1
2
13*  
14  
9. C (stop) button  
• Press to stop playback.  
10. Number buttons  
3
4
5
• Press to enter the title, chapter, track or file  
number.  
• Press to enter values in the input field.  
11. SEARCH button  
• Press to display the search menu.  
12. REPEAT button  
15  
• Press to toggle between various repeat  
modes.  
16  
17  
13. OPEN/CLOSE A button*  
• Press to open or close the disc tray.  
14. POP MENU / MENU button  
• Press to display the pop-up menu / disc  
menu.  
6
7*  
8
18  
19  
20  
9
15. OK button  
• Press to confirm or select menu items.  
16. RETURN button  
10  
21  
22  
23  
24  
25  
• Press to return to the previously displayed  
menu screen.  
17. D (forward) button  
• During playback, press to fast forward the  
playback.  
11  
12  
• In pause mode, press to slow forward the  
playback.  
18. G (skip) button  
• During playback, press to skip to the next  
title, chapter, track or file.  
19. F (pause) button  
(*) The unit can also be turned on by pressing  
these buttons.  
• Press to pause playback.  
• When playback is in pause mode, press  
repeatedly to forward the playback step by  
step.  
1. STANDBY/ON y button  
• Press to turn on the unit, or to turn the unit  
into the standby mode. (To completely turn  
off the unit, you must unplug the AC power  
cord.)  
20. DISPLAY button  
• Press to display the on-screen display menu.  
21. ANGLE button  
2. RED / GREEN / BLUE / YELLOW button  
• Press to select items on some BD menus.  
• When file list / thumbnail list is shown, press  
to switch between pages.  
• Press to access various camera angles on the  
disc.  
• Press to rotate the JPEG files clockwise by 90  
degrees.  
3. TOP MENU button  
22. SUBTITLE button  
• Press to display the top menu.  
• During Netflix / Blockbuster / VUDU feature  
screen is displayed (except during playback),  
press to exit.  
• Press to display the subtitle menu.  
23. AUDIO button  
• Press to display the audio menu.  
4. K/ L/s/B buttons  
• Press to select items or settings.  
5. SETUP button  
• Press to display or to exit the setup menu.  
6. E (reverse) button  
• During playback, press to fast reverse the  
playback.  
7. B (play) button*  
• Press to start playback or resume playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
24. MODE button  
Opening Screen  
• During BD or DVD or AVCHD files playback,  
press to display the setting for the rapid  
playback and the picture adjustment.  
• During BD, DVD and CD playback, press to  
display the setting for the virtual surround.  
• During BD playback, press to turn the picture-  
in-picture feature on or off (only applicable to  
BD-video which supports the PIP function).  
• During the JPEG playback, press to display  
menus for changing the visual effect for  
switching the image or changing the size of  
the image.  
In stop mode, opening screen is displayed.  
Watch HD movies  
• In stop mode with audio CD or WMA / JPEG  
files inserted, press to display menus for  
program and random playback.  
“VUDU:  
To access the VUDU App Home  
screen  
• In stop mode with BD inserted, press to  
display a menu for setting the BD audio  
mode.  
“NETFLIX“:  
To access the Netflix screen  
“BLOCKBUSTER“: To access the Blockbuster  
25. CLEAR button  
menu screen  
• Press to clear the information once entered or  
to cancel the programming for audio CD, etc.  
Installing the Batteries in the Remote Control  
Install AAA (1.5V) battery × 2 matching the  
polarity indicated inside battery compartment of  
the remote control.  
Note  
Incorrect use of batteries can result in hazards  
such as leakage and bursting. Please observe  
the following:  
• Do not mix alkaline, standard (carbon-zinc), or  
rechargeable (ni-cad, ni-mh, etc) batteries.  
• Do not mix new and old batteries together.  
• Do not use different kinds of batteries together.  
Although they may look similar, different  
batteries may have different voltages.  
• Make sure that the + and - ends of each  
battery match the indications in the battery  
compartment.  
• Remove batteries from battery compartment  
that are not going to be used for a month or  
more.  
• When disposing of used batteries, please  
comply with governmental regulations or  
environmental public rules that apply in your  
country or area.  
• Do not recharge, short-circuit, heat, burn or  
disassemble batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
CONNECTIONS  
Connection to the TV  
HDMI Video / Audio Connection  
(Supports up to 1080i / 1080p, 1080p24 resolution.)  
Your TV  
COAXIAL  
L
Wireless LAN  
LAN  
HDMIOUT  
R
AUDIO  
OUT  
VIDEO  
OUT  
HDMI IN  
HDMI cable(not supplied)  
HDMIOUT  
• No analog audio connection required.  
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.  
• High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for optimal  
compatibility.  
Picture is not displayed on the TV screen ...  
The indicators blink under the following conditions.  
• When the connected device does not support HDCP.  
• When the connected device is recognized as an HDCP incompatible by HDMI SRM.  
• When the connected device supports HDCP but cannot be recognized as an HDCP compatible for  
some reason.  
The indicators blink as follows for 30 seconds.  
STANDBY/ON  
STOP  
PLAY  
SD card  
Standard Video + Standard Audio Connection  
(Supports only 480i resolution.)  
Your TV  
COAXIAL  
L
Wireless LAN  
LAN  
HDMIOUT  
R
AUDIO  
OUT  
VIDEO  
OUT  
L
L
VIDEO IN  
AUDIO IN  
Video cable(supplied)  
Audio cable(supplied)  
R
R
AUDIO  
OUT  
VIDEO  
OUT  
• Connect this unit directly to the TV. If the audio / video cables are connected to a VCR, pictures may be  
distorted due to the copy right protection system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Connection to an Audio System  
• When you change the connections, all devices should be turned off.  
• Refer to the manual accompanying external devices for more information.  
2-Channel Analog Audio Connection  
stereo system  
Digital Audio Connection  
AV receiver/amplifier  
AUDIO IN  
R
L
DIGITAL AUDIO INPUT  
COAXIAL  
Analog audio input jacks  
Digital audio coaxial  
input jack  
Digital audio cable  
(not supplied)  
Audio cable  
(supplied)  
COAXIAL  
COAXIAL  
L
L
L
Wireless LAN  
LAN  
HDMIOUT  
LAN  
HDMIOUT  
R
R
AUDIO  
OUT  
VIDEO  
OUT  
AUDIO  
OUT  
VI
O
R
AUDIO  
OUT  
AUDIO OUT  
DIGITAL OUT (COAXIAL)  
To set up “Digital Out, refer to page 32.  
HDMI Audio Connection  
AV receiver/amplifier with an HDMI input jack  
COAXIAL  
HDMI IN  
L
Wireless LAN  
HDMI cable  
(not supplied)  
LAN  
HDMIOUT  
R
AUDIO  
OUT  
VIDEO  
OUT  
HDMIOUT  
To set up “HDMI Audio Out, refer to page 31.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Connection to the Network  
By connecting this unit to the Internet, you can access Netflix, Blockbuster and VUDU services and  
applications, BD-Live features on a Blu-ray Disc and perform network update.  
- For more information about software update, refer to “Network Updateon page 44.  
- For more information about BD-Live, refer to “Enjoying BD-Live Discs with Interneton page 22.  
- For more information about Netflix, refer to “Netflix Operationson page 25.  
- For more information about Blockbuster, refer to “Blockbuster Operationson page 26.  
- For more information about VUDU, refer to“VUDU Operationson page 27.  
Note  
• Wired connection is recommended when using following features. (Using following features with  
wireless connection can be affected by other devices using radio frequencies.)  
- Video streaming services (Netflix, Blockbuster or VUDU)  
- Network update  
Wired Connection  
Make the following connection if you are using a wired router.  
Hub or broadband router  
Networking equipment  
(modem,etc.)  
WAN  
LAN  
LAN  
5
4
3
2
1
LAN cable(not supplied)  
LAN cable(not supplied)  
Internet  
LAN  
COAXIAL  
L
Wireless LAN  
LAN  
HDMIOUT  
R
AUDIO  
OUT  
VIDEO  
OUT  
Note  
• After you made a wired connection, set up necessary network settings. (For network setting of wired  
connection, refer to “Wiredon page 39.)  
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.  
• If your network equipment (modem, etc.) does not have broadband router functions, connect a wired  
broadband router.  
• If your network equipment (modem, etc.) has broadband router functions but there is no vacant port,  
use a hub.  
• For a wired broadband router, use a router which supports 10BASE-T/100BASE-TX.  
• Do not connect your PC directly to the LAN terminal of this unit.  
• Please purchase shielded LAN cables at your local store and use them when you connect to network  
equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Wireless Connection  
Make the following connection if you are using a wireless router.  
Networking equipment  
COAXIAL  
(modem,etc.)  
L
Wireless LAN  
LAN  
HDMIOUT  
R
AUDIO  
OUT  
VIDEO  
OUT  
Internet  
LAN  
WAN  
Hub or wireless broadband router  
LAN cable(not supplied)  
Note  
• After you made the wireless connection, set up necessary network settings.  
(For network setting of wireless connection, refer to “Wirelesson page 41.)  
• For a wireless router, use a router which supports IEEE 802.11 b/g/n.  
(n is recommended for stable operation of the wireless network.)  
• Set the wireless router to Infrastructure mode. This unit does not support Ad-hoc mode.  
• Other radio devices or obstacles may cause interference to the wireless network connection.  
Finding the Video Channel on Your TV  
After you have completed all the connections, you must find the correct video channel (external input  
channel) on your TV.  
1 After you have made all the necessary connections, press [STANDBY/ON y ] to turn on the unit.  
2 Turn on your TV.  
3 Press the button on the TVs remote control that accesses the external input channel. It may be  
labeled “SOURCE, AV” or “SELECT” (refer to your TV’s user manual).  
Watch HD movies  
Note  
• If the TV is connected by an HDMI cable, it may take a while for the opening picture to come up.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
• This unit does not support miniSDHC and  
microSDHC Memory Card.  
PLAYBACK  
• For miniSD Card and microSD Card, an adapter  
is necessary.  
• Portions of this product are protected under  
copyright law and are provided under license  
by ARIS / SOLANA / 4C.  
• Please keep the SD Memory Cards in their cases  
when you are not using them.  
• Do not try to open or modify the card.  
• Do not touch the terminal surface with your  
fingers or any metals.  
• Do not attach additional labels or stickers to  
cards.  
• Do not remove the label of the SD Memory  
Cards.  
• This unit recognizes up to 8 characters of file  
name in the SD Memory Card. Characters after  
8th will not be displayed.  
Information on Playback  
Before you start playing back a disc, read the  
following information.  
Playable Discs and Files  
Playable discs  
Blu-ray Disc  
- BD-video (single / dual layer)  
- BD-RE ver. 2.1 (single / dual layer)  
(Recorded in BDMV format)  
- BD-R ver. 1.1 / 1.2 / 1.3 (single / dual layer)  
(Recorded in BDMV format)  
(Unclosed discs may not be played back.)  
DVD-video  
DVD-RW  
DVD-R  
CD-DA (audio CD)  
CD-RW  
Unplayable Discs and Files  
CD-R  
KODAK Picture CD  
DTS-CD  
• CD-ROM  
• CD-I (compact disc-interactive)  
• DVD-RAM  
• VSD (video single disc)  
Playable files  
Media  
• DVD-audio  
DVD-RW/-R  
AVCHD  
• Video CD  
SD Memory Card  
(including SDHC)  
miniSD Card  
• HD DVD  
• SVCD  
• Unfinalized disc  
microSD Card  
Windows Media TM Audio  
JPEG  
BD-RW/-R  
• BD-RE (ver.1.0)  
DVD-RW/-R  
• BD-RE (ver.2.1) (Recorded in BDAV format)  
• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV  
format)  
CD-RW/-R  
SD Memory Card  
(including SDHC)  
miniSD Card  
microSD Card  
• BD that contains AVCHD files  
• BD / DVD / CD / SD Memory Card contains MP3,  
and DivX® files  
• BD/DVD hybrid disc (played back as a BD-video  
only)  
• DVD-RW/-R recorded in non compatible  
recording format  
• Super Audio CD - Only the sound on the CD  
layer can be heard. The sound on the high-  
density Super Audio CD layer cannot be heard.  
• Playability of dual discs are not guaranteed.  
• This unit cannot play back the disc contents  
protected by Windows Media™ Digital Rights  
Management (DRM).  
Readable cards  
Playable files /  
data  
SD Memory Card (8 MB - 2 GB) AVCHD, Windows  
SDHC Memory Card  
(4 GB - 8 GB)  
miniSD Card (8 MB - 2 GB)  
microSD Card (8 MB - 2 GB)  
Media TM Audio,  
JPEG, picture-  
in-picture  
commentary,  
subtitles or other  
extras for BD-ROM  
ver. 2 (Profile 2.0 /  
Profile 1.1)  
Note for SD Memory Cards  
• This unit supports SD Memory Card with FAT12/  
FAT16 file system, and SDHC Memory Card with  
FAT32 file system.  
• This unit does not support NTFS file system.  
• This unit may not read SD Memory Cards  
formatted on a computer. If that is the case,  
please reformat the SD Memory Cards in this  
unit and try again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Region Codes  
Disc information  
1
2
This unit has been designed to play back BD-video  
with region “Aand DVD-video with region “1”  
or “ALL. You cannot play back BD-video or DVD-  
video that are labeled for other regions. Look for  
the symbols on your BD-video or DVD-video.  
If these region symbols do not appear on your BD-  
video or DVD-video, you cannot play back the disc  
in this unit. The letter or number inside the globe  
refers to region of the world. A BD-video or DVD-  
video labeled for a specific region can only be  
played back in the unit with the same region code.  
1 / 14  
0 : 00: 51  
T
1.Current track number / Total number of  
tracks  
2.Elapsed time (or remaining time) of the  
current disc  
File name information  
1
File_name_001  
1.Media icon and file name  
On-Screen Display  
: WMA files  
You can check information about the current disc  
by pressing [DISPLAY].  
To call the on-screen display menu, press  
[DISPLAY] during playback. Every time you press  
[DISPLAY], the information changes. Depending  
on the media, available information varies.  
: JPEG file  
Tag information  
<Title name information>  
1
TITLE  
Chapter information  
<Title / Chapter information for BD and AVCHD>  
<Artist name information>  
1
2
3
4
5
2
ARTIST NAME  
1
1/10  
T
<Chapter information for DVD>  
1. Title name based on tag information of  
current Windows Media™ Audio file  
2. Artist name based on tag information of  
current Windows Media™ Audio file  
2
6
3 / 5  
0 : 01 : 02  
1.Current title number  
Decoding format information  
2.Current chapter number / Total number of  
chapters  
1
3.Current repeat setting (Only when repeat  
setting is active)  
Dolby Digital  
1.Decoding format  
(C: Chapter repeat, T: Title repeat)  
4.Indicates that the multi camera angle images  
are available on the scene  
How to Insert a Disc  
1. Press [OPEN/CLOSE A] to open the disc tray.  
2. Place the disc on the disc tray with its label  
side facing up.  
5.Current playback status  
6.Elapsed time (or remaining time) of the  
current chapter  
Title information  
1
2
Align the disc to the disc tray guide.  
3 / 5  
0 : 01 : 02  
• Make sure the disc is compatible with this  
unit. (Refer to page 14 for the list of compatible  
discs.)  
1.Current title number / Total number of titles  
2.Elapsed time (or remaining time) of the  
current title  
3. Press [OPEN/CLOSE A] to close the disc tray.  
It may take a while to load the disc.  
Track / File information  
1
2
3
4
To eject the disc:  
1 / 14  
0 : 00: 51  
SD  
G
Press [OPEN/CLOSE A] to open the disc tray.  
Remove the disc.  
1.Current track (file) number / Total number of  
track(file)  
Press [OPEN/CLOSE A] to close the disc tray.  
2.Elapsed time (or remaining time) of the  
current track (except for JPEG files)  
3.Indication of SD Memory Card playback  
4.Current repeat setting  
(Only when repeat setting is active)  
(T: Track repeat, G: Group repeat,A: All  
repeat)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Selecting the Media Mode  
Reading the SD Memory Card  
For the playback media to be read by this unit, the  
correct media mode should be selected. You can  
switch the media mode by following the steps  
below.  
You can play back the AVCHD / WMA / JPEG files in  
an SD Memory Card.  
With the SD Memory Card, you can also enjoy the  
following functions.  
- Special additional contents for BD-ROM Profile 1  
ver.1.1. (For more information about the special  
additional contents, refer to the instruction book  
that came with the disc.)  
1. In stop mode, press [SETUP].  
2. Use [K/L] to select , then press [OK] .  
3. Use [K/L] to select “Mode Select, then press  
[OK].  
- BD-Live function (BD-ROM ver. 2 Profile 2.0). (For  
more information about BD-Live, refer to page 22.)  
Quick  
1. Insert an SD Memory Card, with the label  
side facing up, into the SD card slot until it  
clicks.  
Mode Select  
HDMI Audio Out  
HDMI Video Resolution Auto  
Player Menu  
Disc  
HDMI Multi(Normal)  
• If no disc is in operation, “Media Select”  
screen will appear on the TV screen.  
English  
Wired  
Network Selection  
2. Use [K/L] to select “SD Card, then press  
[OK].  
3. Use [K/L] to select a desired track, folder  
or file, then press [OK]. Use [s/B] to  
go backward and forward between the  
hierarchies.  
4. Use [K/L] to select the desired media mode,  
then press [OK].  
5. Press [SETUP] to exit.  
• Selected media mode is now activated.  
• If you press [OK] on the desired file, playback  
will start.  
Even if you turn the unit to the standby mode in  
“SD Cardor “Networkmode, it will be in “Disc”  
mode the next time you turn it on.  
To remove the SD Memory Card:  
In stop mode, gently push in the SD Memory  
Card, then pull it out slowly.  
Note  
Playing Back (BD / DVD/ Disc with AVCHD  
Files)  
• The “Media Selectscreen will disappear under  
the conditions listed below:  
1. Press [STANDBY/ON y ].  
- when the screen saver is activated.  
- when [RETURN] is pressed.  
2. Turn on the TV and select the appropriate  
input on the TV to which the unit is  
connected.  
- when the setup menu is called up.  
• If the “Media Selectscreen disappears before  
you make the selection, refer to “Selecting the  
Media Modeon page 16.  
3. Insert a disc (refer to “How to Insert a Disc”  
on page 15 ).  
4. Playback may start automatically.  
If not, press [B (play)].  
• Do not remove the SD Memory Card or turn the  
unit to the standby mode while the contents  
of the card are in playback. It may result in  
malfunction or loss of the card’s data.  
• Do not delete the folders or files in the SD  
Memory Card with your computer. This unit  
may not read SD Memory Cards formatted on a  
computer.  
• Some discs may show a title or a disc menu.  
• For a disc with AVCHD files, title menu is  
displayed.  
In such case, refer to “Using the Title / Disc /  
Pop-up Menuon page 17.  
To pause playback:  
Press [F (pause)].  
• If a folder or file name includes one of the  
following unrecognizable characters, the folder  
or file name may not be displayed correctly.  
- Unrecognizable characters : . , “ = + [ ] ; / \ : | ¥  
• For an SD Memory Card, extension other than  
listed below cannot be recognized.  
- WMA : .wma”  
To return to the normal playback:  
Press [B (play)].  
To stop playback:  
Press [C (stop)].  
Playback will be in Resume-On-Stop mode.  
Resume-On-Stop mode  
If a playback is in Resume-On-Stop mode, when  
you press [B (play)] next time, the playback will  
start from the point where it has been stopped.  
Note  
- JPEG : ".jpg"  
• Resume playback may not be available for the  
BD that supports Java applications (BD-Java).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
• In the “Discmode, the resume information will  
be cleared when;  
Note  
• Contents of menus and corresponding menu  
operations may vary among discs. Refer to the  
manual accompanying the disc for details.  
• Title menu is also available for SD card with  
AVCHD files.  
- [C (stop)] is pressed while in the Resume-On-  
Stop mode.  
- the parental level is changed.  
- the disc tray is opened.  
• In the “SD Cardmode, the resume information  
will be cleared when;  
Playing Back (Audio CD / Windows Media TM  
Audio / JPEG Files)  
- [C (stop)] is pressed while in the Resume-On-  
Stop mode.  
Before you begin, make sure the correct media  
mode is selected. Refer to “Selecting the Media  
Modeon page 16.  
- the SD Memory Card is removed.  
- the unit is turned into the standby mode.  
Note  
1. Insert an audio CD or a disc/card with WMA /  
JPEG files.  
may appear at the top-right on the TV screen  
when the operation is prohibited by the disc or  
this unit.  
2. Use [K/L] to select a desired track, folder or  
file, then press [OK]. Use [s/B] to go back  
and forward between the hierarchies (only  
for WMA/JPEG files).  
• During the playback of 2-layered disc, pictures  
may stop for a moment. This happens when the  
1st layer switches to the 2nd layer. This is not a  
malfunction.  
• If you press [OK] on the desired file, playback  
will start.  
1
2
3
4
5
6
• The operation may vary when you play back  
BD-videos, DVD-videos or AVCHD files with disc  
menu. Refer to the manual accompanying the  
disc for details.  
• If a disc contains AVCHD files, the playback of  
other files on the same disc are not available. All  
files on an SD Memory Card are available.  
• Set “Still Modesetting to “Fieldin “Videomenu  
if pictures in the pause mode are blurred. Refer  
to “Still Modeon page 30.  
- - / 20  
File List  
JPEG_DISC  
Folder_1  
Folder_2  
Folder_3  
JPEG_A  
JPEG_B  
JPEG_C  
JPEG_D  
Page Up  
Page Down  
Using the Title / Disc / Pop-up Menu  
1
2
audio CD:  
WMA/JPEG: File information  
audio CD: “CD-DAwill be displayed.  
Track information  
Many of BD-video and DVD-video discs contain  
title menu (BD-video / DVD-video / AVCHD), disc  
menu (DVD-video) or pop-up menu (BD-video)  
which guides you through the available functions  
in the disc. The contents of the menus may differ  
depending on the discs.  
WMA/JPEG: Current Disc or folder name will be  
displayed.  
List of the track number and time.  
3
4
audio CD:  
WMA/JPEG: List of the file / folder names in the  
current folder / disc  
Title menu (BD-video / DVD-video / AVCHD)  
1. Press [TOP MENU].  
Operation Press [RED] to go to the previous  
2. Use [K/L/s/B] to select an item, then press  
[OK].  
guide:  
page. Press [GREEN] to go to the next  
page.  
3. Press [TOP MENU] to exit.  
6
7
Current page / Total page number  
Playback status  
Disc menu (DVD-video)  
1. Press [POP MENU / MENU].  
2. Use [K/L/s/B] to select an item, then press  
[OK].  
Icons:  
Folder  
3. Press [POP MENU / MENU] to exit.  
Pop-up menu (BD-video)  
This is a special feature available for some BD-  
videos. When you press [POP MENU / MENU], a  
menu pops out on the TV screen during playback.  
1. During the playback of BD-video, press  
[POP MENU / MENU].  
audio CD tracks  
WMA files  
JPEG files  
2. Use [K/L/s/B] to select an item, then press  
[OK].  
3. Press [POP MENU / MENU] to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
KODAK Picture CD  
3. Press [C (stop)] to stop playback.  
This unit can also run JPEG files stored on KODAK  
Picture CD. You can enjoy picture images on the  
TV set by playing back the KODAK Picture CD. This  
unit conforms to ver.7.0 of KODAK Picture CD. For  
details of KODAK Picture CD, contact a shop that  
provides developing service of Kodak Inc.  
It is recommended that files to be played back  
in this unit are recorded under the following  
specifications:  
<Windows Media™ Audio>  
• Sampling  
frequency :  
32 kHz, 44.1 kHz or 48 kHz  
1. When KODAK Picture CD is inserted in this  
unit, KODAK Picture CD menu will appear  
automatically on the TV screen.  
• Constant bit rate : 48 kbps - 192 kbps  
<JPEG>  
1
4
• Upper limit :  
2,560 x 1,900 dots (sub  
sampling is 4:4:4)  
- - / 16  
5,120 x 3,840 dots (sub  
sampling is up to 4:2:2)  
Thumbnail  
Pictures  
• Lower limit :  
• File size of image  
maximum :  
32 x 32 dots  
12 MB  
Note  
• Unrecognizable characters will be replaced with  
asterisks.  
Page Prev  
Page Next  
• Some unplayable folders or files may be listed  
due to the recording status.  
• High-resolution JPEG files take longer to be  
displayed.  
• Progressive JPEG files (JPEG files saved in  
progressive format) cannot be played back in  
this unit.  
• The system can recognize up to 255 folders /  
999 files for CD, 999 folders / 9,999 files for BD,  
DVD and SD Memory Card.  
• The 9th and deeper hierarchies cannot  
be displayed for CD. The 10th and deeper  
hierarchies cannot be displayed for BD, DVD  
and SD Memory Card.  
2
3
1
2
3
File information  
Current page / Total page number  
Operation guide: Press [BLUE] to go to the  
previous page.  
Press [YELLOW] to go to  
the next page.  
4
Playback status  
2. Use [K/L/s/B] to select a desired file to be  
played back, then press [B (play)] or [OK].  
• An image will be played back from the  
selected file and go to the next one in turn.  
3. Press [C (stop)] to stop playback.  
To return to the first item:  
• For the SD Memory Card playback, refer to  
“Reading the SD Memory Cardon page 16.  
• Extension other than listed below cannot be  
recognized.  
Press [TOP MENU].  
To return to the file played last:  
Press [POP MENU / MENU].  
Tips for JPEG / KODAK Picture CD Playback  
• The selected file will be played back and go  
to the next file in the current hierarchy in turn  
every 10 seconds.  
• Every press on [ANGLE] will turn the image  
clockwise by 90 degrees when an image is  
displayed.  
• To change the visual effect for switching the  
playback image, press [MODE] once, then use  
[s/B] or [OK] to switch between “Cut In/Out”  
and “Fade In/Out.  
- WMA : .wma”  
- JPEG : .jpg”/.jpeg”  
With regard to the multi-border BD-RE/-R,  
additionally recorded sections cannot be  
recognized.  
• With regard to the multi-border DVD-RW/-R,  
additionally recorded sections may not be  
recognized.  
• If a disc contains AVCHD files, the playback of  
other files on the same disc are not available. All  
files on an SD Memory Card are available.  
• During JPEG / KODAK Picture CD playback,  
press [MODE] twice to change the size of the  
playback image, then use [s/B] or [OK] to  
switch between “Normal(100 %) and “Small”  
(95 %). The size change may have no effect on  
some files (e.g. files with a small picture size).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Fast Forward / Fast Reverse  
Repeat Playback  
1. During playback, press [D (forward)]  
repeatedly for fast forward.  
During playback, press [E (reverse)]  
repeatedly for fast reverse.  
Every time you press [D (forward)] or  
[E (reverse)], the playback speed will  
change.  
Available repeat functions vary depending the  
discs.  
1. During playback, press [REPEAT] repeatedly  
to select the desired repeat mode.  
Repeat mode  
Chapter repeat  
Available media  
BD-video  
DVD-video  
AVCHD files  
The current chapter will be  
2. Press [B (play)] to return to normal  
playback.  
played back repeatedly.  
Title repeat  
BD-video  
DVD-video  
AVCHD files  
The current title will be  
Note  
played back repeatedly.  
• For BD and DVD and AVCHD, speed changes in  
5 different levels.  
Track repeat  
audio CD  
WMA file  
• For audio CD and Windows Media TM Audio,  
speed changes in 3 different levels.  
• For audio CD, fast forward / fast reverse search  
between different tracks are not available  
during program and random playback.  
• For Windows Media™ Audio, fast forward / fast  
reverse search between different files are not  
available.  
The current track will be  
played back repeatedly.  
Group repeat  
WMA file  
JPEG file  
The current folder will be  
played back repeatedly.  
All repeat  
audio CD  
WMA file  
JPEG file  
All tracks or files in the  
media will be played back  
repeatedly.  
Slow Forward Playback  
Note  
1. During playback, press [F (pause)], then  
• The repeat setting will be canceled when you  
stop playback.  
press [D (forward)].  
Every time you press [D (forward)],  
playback speed will change.  
2. Press [B (play)] to return to normal  
playback.  
• The chapter, title, track or group repeat will be  
cleared when moving to another chapter, title,  
track / file or folder.  
• Chapter and title repeat are not available with  
some scenes.  
• When the repeat setting is set for a WMA folder  
(file), the repeat setting will be canceled if you  
select other WMA folder (file) to playback.  
Note  
• For BD and DVD, speed changes in 3 different  
levels.  
• Only slow forward is available.  
• Set “Still Modesetting to “Fieldin “Videomenu  
if pictures in the slow forward playback mode  
are blurred. Refer to “Still Modeon page 30.  
Program Playback  
You can play back the disc/card in your desired  
order.  
Step by Step Playback  
1. In stop mode, press [MODE].  
2. Use [K/L] to select a track / folder / file, then  
press [OK].  
1. In pause mode, press [F (pause)] repeatedly.  
Every time you press [F (pause)], playback  
will advance one step at a time.  
2. Press [B (play)] to return to normal  
playback.  
1
2
3
4
5
6
- - / 16  
Program  
CD_DA  
Total  
0 : 26 : 24  
Note  
8
9
0:36  
2
4
9
1:14  
• Only step by step forward is available.  
• Set “Still Modesetting to “Fieldin “Videomenu  
if pictures in step by step playback mode are  
blurred. Refer to “Still Modeon page 30.  
1:14  
0:45  
0:50  
0:53  
0:20  
0:54  
0:50  
1:14  
0:50  
0:53  
0:54  
0:36  
10  
11  
12  
13  
14  
11  
12  
14  
8
2
/
3
2
/
3
7
8
Page Up  
Page Down  
Page Prev  
Page Next  
e.g.) audio CD  
Track information  
1
audio CD:  
WMA/JPEG: File information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
• Playback from a desired track / file and random  
playback are not available during program  
playback.  
• Press [MODE] to switch to the random playback  
mode.  
2
3
audio CD:  
“CD-DAwill be displayed.  
WMA/JPEG: Current Disc, SD Memory  
Card, or folder name will be  
displayed.  
Track /  
Track / Folder / File list in the  
Folder / File original order  
list:  
• The program will be cleared when;  
- the unit is turned into the standby mode.  
- the media mode is switched to the other  
mode.  
4
5
Programmed Track / File list in the  
list :  
Cumulative playback time of all tracks in the  
programmed list (audio CD only)  
Playback status  
Current page / Total page number  
Operation  
guide:  
programmed order  
- the disc / card is removed. (as for “Disc”  
mode, just opening the disc tray will clear the  
program info.)  
6
7
8
Random Playback  
Press [RED] to go to the  
previous page in the track /  
file list.  
This function shuffles the playback order of tracks  
/ files.  
1. In stop mode, press [MODE] twice.  
Press [GREEN] to go to the next  
page in the track / file list.  
Press [BLUE] to go to the  
previous page in the  
programmed list.  
1
2
3
4
5
6
- - / 16  
Random  
CD_DA  
Total  
1 : 13 : 29  
Press [YELLOW] to go to the  
next page in the programmed  
list.  
1
2
3
4
5
6
7
0:36  
1:14  
0:45  
0:50  
0:53  
0:20  
0:54  
• For WMA/JPEG files, use [K/L] to select a folder,  
then press [OK] first, and then use [K/L] to  
select a file, then press [OK].  
1
/
3
Page Down  
• Press [CLEAR] to erase the last file of the  
program.  
• Use [K/L] to select “All Clearat the bottom  
of the list to erase all the tracks / files in the  
program.  
• The programmed tracks / files is displayed in  
the right hand screen.  
• Use [s/B] to go back / forward between the  
hierarchy of folders.  
1
2
audio CD:  
Track information  
WMA/JPEG: File information  
audio CD: “CD-DAwill be displayed.  
WMA/JPEG: Current Disc, SD Memory  
Card, or folder name will be  
displayed.  
Track / File Track / File list in the original  
list:  
Operation  
guide:  
3
4
order will be displayed.  
Press [RED] to go to the  
previous page in the track /  
file list.  
3. Press [B (play)] to start program playback.  
• The program playback will start.  
To exit from the program playback mode:  
• Press [RETURN] in stop mode.  
Press [GREEN] to go to the next  
page in the track / file list.  
Note  
5
6
Total playback time of all tracks (audio CD  
only)  
Playback status  
• During program playback, press [C (stop)]  
once to set the resume point, and then press  
[B (play)] to resume program playback from  
where [C (stop)] was pressed (audio CD) or  
from beginning of the file where [C (stop)] was  
pressed (WMA/JPEG).  
2. Press [B (play)] to start random playback.  
To exit from the random playback mode:  
• Press [MODE] in stop mode.  
• During program playback, press [C (stop)] twice  
to display the program screen. To go back to the  
normal program playback, press [RETURN] to  
exit from the program screen, then press  
[B (play)].  
Note  
• During the random playback, press [C (stop)]  
once to set the resume point, and then press  
[B (play)] to resume random playback from  
where [C (stop)] was pressed (audio CD) or  
from beginning of the file where [C (stop)] was  
pressed (WMA/JPEG).  
• Up to 99 tracks / files can be entered.  
• To repeat the current track / file in the program,  
press [REPEAT] repeatedly until “  
Track”  
appears during playback. To repeat the entire  
program, press [REPEAT] repeatedly until  
Allappears during playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
• To repeat the current track / file in the random  
selection, press [REPEAT] repeatedly until  
Trackappears during playback. To repeat  
the entire random selection press [REPEAT]  
Noise reduction (DVD-video only)  
Reduces the noise of the playback picture.  
“Off” :Shows the original picture as recorded.  
“1” :Executes 3D noise reduction which detects  
and deletes the noise by comparing each  
picture frames.  
“2” :Executes MPEG noise reduction which  
reduces the block noise and mosquito  
noise on the subtitle on movie.  
“3” :Executes both MPEG noise reduction and  
3D noise reduction.  
repeatedly until “  
playback.  
Allappears during  
• Playback from a desired track / file is not  
available during random playback.  
• In stop mode, press [RETURN] to switch to the  
program playback mode.  
Rapid Playback  
This function plays back approximately at 1.3  
times the normal playback while keeping the  
sound output. This function is available only on  
discs recorded in the Dolby Digital format.  
1. During playback, press [MODE] repeatedly  
until the Rapid playback setting appears.  
3. Press [RETURN] to exit.  
Note  
• The setting will remain the same even if the unit  
is turned to the standby mode.  
• “Black Levelis not effective under the following  
conditions.  
Off  
- When the picture is output from HDMI OUT  
jack.  
• You cannot adjust the setting during rapid  
playback.  
2. Press [OK] or [s/B] to switch (1.3x), or “Off.  
“Off” : Plays back in normal speed.  
”: Plays back approximately at 1.3 times of  
normal playback.  
3. Press [B (play)] to return to normal  
Virtual Surround  
You can enjoy stereophonic virtual space through  
your existing 2 channel stereo system.  
playback.  
Note  
• Picture adjustment and audio language setting  
cannot be changed during this function.  
• Virtual surround does not work during this  
function.  
• This function may not work at some points on  
a disc.  
1. During playback, press [MODE].  
2. Use [K/L] to select your desired setting.  
Off  
“Off” :No surround effect  
“1” :Natural surround effect  
“2” :Stronger surround effect  
3. Press [RETURN] to exit.  
• During this function, 2ch LPCM will be output  
from HDMI OUT jack and DIGITAL OUT jack.  
Adjusting the Picture  
Note  
You can adjust the picture quality.  
• Set the virtual surround setting to “Offor lower  
the volume if the sound is distorted.  
• Virtual surround does not function during rapid  
playback.  
1. During playback, press [MODE] repeatedly  
until  
appears.  
2. Use [K/L] to select your desired item, then  
use [s/B] to adjust the setting.  
• For the virtual surround, audio signal will always  
be 2-channel LPCM.  
Black Level  
Noise Reduction  
On  
Off  
e.g.) DVD-video  
Black level  
You can adjust the black level setting to make the  
black parts of the pictures as bright as you prefer.  
You can select “Onor “Off.  
“On” :Makes the dark parts brighter.  
“Off” :Shows the original picture as recorded.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Enjoying BD-Live Discs with Internet  
PIP (BONUSVIEW) Setting  
You can enjoy BD-Live which enables you to use  
interactive features when the unit is connected  
to the Internet. (For network connection, refer to  
page 39.) Examples of BD-Live features:  
• Online access to additional content such as  
movie trailers, subtitles, BD-Java applications,  
etc.  
Some BD-videos have the PIP function which  
enables you to display the secondary video in  
the primary video. You can call up the secondary  
video by pressing [MODE] whenever the scene  
contains the secondary video.  
• While downloading, special video data may be  
played back.  
How to Activate the BD-Live Function  
primary video  
1. Insert the disc with BD-Live function.  
2. Insert an SD card with enough capacity. (SD  
card of 1GB or more is recommended.)  
• Make sure to use the SD card with the  
supported file system. (Refer to “Reading the  
SD Memory Cardon page 16.)  
secondary video  
1. During playback, press [MODE] repeatedly  
until the PIP function appears.  
2. Use [K/L] to select the secondary video you  
want.  
3. Press [TOP MENU] to access the disc menu.  
4. Select “BD-Live, then press [B (play)] or  
[OK].  
• The secondary video will be displayed and  
the secondary audio will be output.  
• Use [s/B] to switch between current setting  
and “Off.  
• Make sure the SD card is correctly inserted,  
and do not remove the card during playback.  
• Service and functions differ depending on  
the disc. Follow the instructions given by the  
disc when using the BD-Live function.  
Note  
3. Press [RETURN] or [MODE] to remove the PIP  
information.  
• You must connect the unit to the Internet and  
set up necessary settings in order to use BD-  
Live.  
• For certain discs, “BD-Live Settingmay need to  
be changed.  
• Depending on your connection environment, it  
may take time to connect to the Internet or the  
Internet may not be connected.  
Note  
• The secondary audio will not be output when  
the secondary audio is set to “Offor when “BD  
Audio Modeis set to “HD Audio Output. Refer  
toSwitching Audio Soundtrackon page 24 and  
“Setting the BD Audio Modeon page 24.  
Camera Angle  
• When BD-Live functions are used and the unit is  
connected to the Internet, you may be charged  
for this communication.  
• While connecting to BD-Live, sometimes it can  
take awhile before the next page is downloaded  
or refreshed.  
Some BD-videos and DVD-videos contain scenes  
which have been shot simultaneously from  
various angles. You can change the camera angle  
when  
appears on the TV screen.  
1. During playback, press [ANGLE].  
• The selected angle will be displayed on the  
display bar at the top of the TV screen.  
2. Use [K/L] to select your desired angle.  
• Some discs with BD-Live function require  
memory when playing back the content. If you  
cannot play back a disc with BD-Live function,  
insert an SD card(1GB or more) which is  
formatted on this unit.  
1 / 3  
Note  
Note for AACS Online  
• If “Angle Iconsetting is “Offin “Othersmenu,  
will not appear. Refer to page 36.  
• The player or disc IDs may be sent to the  
content provider when playing back a disc with  
BD-Live function.  
• If you save your viewing history on the server by  
using these IDs, you will be introduced to other  
similar movies.  
• You can save game score histories.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Search  
Using [the Number buttons] (Direct Search)  
Using [H/G (skip)]  
Title search  
1. During playback, press [G (skip)] to move  
to the next track / title / chapter / file. Press  
it repeatedly to skip to subsequent tracks.  
Press [H (skip)] once to go back to the  
beginning of the current track. Press it  
repeatedly to go to the previous tracks.  
• For JPEG files, press [H (skip)] to go back to  
the previous file.  
In stop mode, enter the title number you want  
to search using [the Number buttons].  
Playback of the title will start in a few seconds.  
Chapter search  
During playback of a title, enter the chapter  
number you want to search using  
[the Number buttons].  
Playback of the chapter will start in a few  
seconds.  
Note  
Track / file search  
• For BD and DVD, if title contains no chapters,  
[H/G (skip)] changes the title.  
• For JPEG files, [s/B] is also available.  
Enter the track / file number you want to search  
using [the Number buttons].  
Playback of the track / file will start in a few  
seconds.  
Using [SEARCH]  
By using [SEARCH], you can select the following  
search modes.  
Note  
Search mode  
Available media  
• As for the BD-video, how it performs will be  
strongly determined by the disc, and may not  
perform as described here.  
BD-video  
/
DVD-video  
AVCHD file  
Chapter / Title search  
Switching Subtitles  
audio CD  
WMA file  
JPEG file  
BD-video  
DVD-video  
audio CD  
AVCHD file  
Some video materials may have subtitles in 1 or  
more languages. For commercially available discs,  
the supported languages can be found on the disc  
case. Follow the steps below to switch the subtitle  
languages during playback.  
Track search  
Time search  
1. During playback, press [SUBTITLE].  
2. Use [K/L] to select “Primary Subtitle,  
“Secondary Subtitle” or “Subtitle Style, then  
press [OK].  
1. During playback, press [SEARCH] repeatedly  
until your desired search mode appears.  
2. Enter the desired chapter, title, track, file  
number or time to search for using  
[the Number buttons].  
Primary Subtitle  
Secondary Subtitle  
Subtitle Style  
2
2
2/25  
ENG  
ENG  
/11  
/11  
• Chapter, title, track or time search will start.  
• Press [CLEAR] to erase an incorrect input.  
Note  
“Primary Subtitle” :  
Sets the subtitle for  
the primary video.  
• During program and random playback, search  
functions are not available except the search  
using [H/G (skip)].  
• Time search is available only in the same track,  
file or title.  
• For BD / AVCHD, chapter and time search are  
available only during playback.  
“Secondary Subtitle” : Sets the subtitle for  
the secondary video.  
Sets style of the  
subtitle.  
“Subtitle Style” :  
3. Use [K/L] to select your desired subtitle or  
style.  
• Use [s/B] to switch between current subtitle  
setting and “Off.  
4. Press [SUBTITLE] to exit.  
1. During playback, press [SUBTITLE].  
2. Use [K/L] to select your desired subtitle.  
• Use [s/B] to switch between current subtitle  
setting and “Off.  
1
ENG  
/ 4  
3. Press [SUBTITLE] to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Note  
Note  
• The secondary audio will not be output when  
the secondary video is not displayed or when  
“BD Audio Modeis set to “HD Audio Output.  
(For some BDs, secondary audio will be output  
even when secondary video is off.)  
• Some discs will only allow you to change the  
subtitles from the disc menu or pop-up menu.  
Press [TOP MENU] or [POP MENU / MENU] to  
display the disc menu or pop-up menu.  
• If 4-digit-language code appears in the subtitle  
menu, refer to “Language Code Liston page 48.  
• If the disc has no subtitle language or subtitle  
style, “Not Availablewill be displayed on the TV  
screen.  
• The sound mode cannot be changed during  
playback of discs not recorded in multiple  
audio.  
• Some discs allow changing the audio language  
setting on the disc menu. (Operation varies  
depending on the discs. Refer to the manual  
accompanying the disc.)  
• [AUDIO] may not work on some discs with  
multiple audio streams or channels (e.g. DVDs  
that allow changing audio setting on the disc  
menu).  
• If you select a language that has a 3-letter-  
language code, the code will be displayed every  
time you change the audio language setting.  
If you select any other languages, “---will be  
displayed instead. (Refer to page 48.)  
• Audio Language selection cannot be made  
during rapid playback. (Refer to page 21.)  
• If 4-digit-language code appears in the audio  
menu, refer to page 48.  
• During playback of the secondary video, the  
primary subtitle setting is not available except  
when there is no subtitle for the secondary  
video.  
• If you select a language that has a 3-letter-  
language code, the code will be displayed every  
time you change the subtitle language setting.  
If you select any other languages, “---will be  
displayed instead. (Refer to page 48.)  
Switching Audio Soundtrack  
When playing back video material recorded with  
2 or more soundtracks (these are often in different  
audio languages or audio formats), you can switch  
them during playback.  
• If the disc has no audio language, “Not  
Availablewill be displayed on the TV screen.  
• For DTS-CD (5.1 music disc), selecting audio  
streams or channels is not available.  
1. During playback, press [AUDIO].  
2. Use [K/L] to select “Primary” or “Secondary”  
audio to set, then press [OK].  
Primary  
1
ENG  
Secondary  
ENG  
Dolby D  
Multi-ch  
Multi-ch  
/3  
/3  
Setting the BD Audio Mode  
2
Dolby D+  
There are 2 options for the “BD Audio Mode”  
setting; either by setting the output to the  
secondary and interactive audio accompanied by  
the primary audio or by setting only the primary  
audio. Depending on the setting of the mode,  
Dolby Digital, Dolby Digital Plus, Dolby TrueHD,  
DTS, or DTS-HD output changes between multi  
LPCM and Bitstream.  
“Primary” :  
Sets the audio for the primary  
video.  
“Secondary” : Sets the audio for the  
secondary video.  
3. Use [K/L] to select your desired audio  
stream channel.  
• For “Secondary, use [s/B] to switch  
between current audio setting and “Off.  
4. Press [AUDIO] to exit.  
1. In stop mode with BD inserted, press  
[MODE].  
2. Use [K/L] to select your desired setting.  
BD Audio Mode  
Mix Audio Output  
1. During playback, press [AUDIO].  
2. Use [K/L] to select your desired audio  
stream channel.  
“Mix Audio Output”:  
If it is available, BD-video’s secondary and  
interactive audio will be output with the  
primary audio.  
1
ENG Dolby D  
3/2.1ch  
48k  
/ 3  
• The secondary audio is the audio for the  
secondary video (Director’s comment etc.)  
and the interactive audio is the audio for the  
interactive application (Button click sounds  
etc.).  
• For audio CD, you can select following  
options.  
“Stereo” : Both right and left channels are  
active (stereo).  
“L-ch” :  
“R-ch” :  
Only left channel is active.  
Only right channel is active.  
“HD Audio Output”:  
Only the primary audio will be output. Set this  
mode in order to output , Dolby Digital Plus,  
Dolby TrueHD, or DTS-HD audio of BD through  
HDMI connection.  
3. Press [AUDIO] to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
3 Press [RETURN] to exit.  
4. Enter the activation code which is displayed  
on the TV screen.  
• You can also set “BD Audio Modefrom the  
setup menu. Refer to page 31.  
• The instant Queue will appear. The  
connection to Netflix is successfully made.  
• To browse the instant Queue and watch  
movies, skip to step 2 in “Watching Streaming  
Movieson page 25.  
Note  
• In “Mix Audio Outputmode, if there is no  
secondary and interactive audio, the audio will  
be output as “HD Audio Outputmode.  
Note  
• Netflix is available only in the United States.  
• You cannot create a Netflix account on this unit.  
• If newer version of software is required,  
software update screen may appear after  
selecting “NETFLIXin step 1. (For software  
update, refer to “Software Updateon page 43.)  
• You can deactivate the connection to Netflix  
by setting “Netflix Deactivateto “Yes. (Refer to  
page 44.)  
NETWORK OPERATIONS  
Netflix Operations  
With this unit, you can watch movies and TV  
episodes streamed instantly from Netflix (version  
1.6) via the Internet. In order to use this feature, you  
must visit the following website on your PC and  
become a Netflix member. netflix.com/MAGNAVOX  
• The screen image of Netflix may change after  
updating the firmware.  
Before Activating the Connection to Netflix  
• For questions regarding the Netflix service, visit  
netflix.com/Help  
After creating a Netflix account at netflix.com/  
MAGNAVOX, follow the following procedure  
before activating the connection to Netflix.  
1. Connect this unit to the Internet.  
• Refer to “Connection to the Networkon  
page 12.  
• When you contact the Netflix customer service,  
you may be asked for the ESN number, which is  
a serial number to identify this unit by Netflix.  
You can check the ESN number on the bottom  
of the “Netflix Deactivatescreen. (Refer to page  
44.)  
2. Set up the necessary network connection  
settings.  
• Refer to “Network Connectionon page 39.  
Watching Streaming Movies  
Activating the Connection to Netflix  
After you set up the connection to Netflix, you can  
browse the instant Queue and watch movies on  
your TV.  
1. Press [GREEN] while opening screen is  
displayed.  
For opening screen, refer to page 9.  
The instant Queue will appear.  
2. Use [s/B] to select the desired movie or  
TV episode, then press [B(play)] to start  
playback.  
In order to watch movies and TV episodes  
streamed instantly from Netflix via the Internet,  
you must activate the connection between this  
unit and your Netflix account.  
1. Press [GREEN] while opening screen is  
displayed.  
• For opening screen, refer to page 9.  
• Netflix welcome screen will appear.  
• For the first time only, “Network Service  
Disclaimerscreen will appear. After  
confirming the content, use [s/B] to select  
“Agree, then press [OK].  
2. Use [K/L] to select “yes - activate instant  
streaming from Netflix, then press [OK].  
• Activation screen with the activation code  
will appear.  
• After loading, playback of the selected movie  
or TV episode will start.  
• To stop the playback, press [C(stop)].  
• To go back to the instant Queue, press [RED].  
• To go back to the opening screen, press  
[TOP MENU] or [SETUP].  
About the Instant Queue  
• Instant Queue is the list of movies and TV  
episodes you add on the Netflix website  
(netflix.com). You can manage the movies and  
TV episodes in your instant Queue from the  
3. On your PC, visit netflix.com/activate and  
log into your account.  
• The entry screen of activation code will  
appear on your PC screen.  
Download from Www.Somanuals.com. AllNMeatnfuliaxlswSeebasricteh oAnndyDoouwr nPlCoa. d.  
25  
3. Use [s/B] to select “Configure, then press  
[OK].  
• You cannot add movies or TV episodes to your  
instant Queue on this unit.  
• You can remove movies or TV episodes from the  
instant Queue on this unit.  
Note  
• Activation code input screen will appear.  
Configure  
Activate this device on your BLOCKBUSTER account.  
• The picture quality differs depending on the  
speed of your Internet connection at the time  
of loading.  
Use the numbers on your remote control.  
Activate  
Blockbuster Operations  
With this unit, you can watch movies and TV  
episodes streamed instantly from Blockbuster  
via the Internet. In order to use this feature, you  
must visit the following website and create a  
Blockbuster account.  
4. Enter the activation code displayed on your  
PC using [s/B] and [the Number buttons],  
then select “Activate” and press [OK].  
Note  
• The image of menu screen may change after  
updating the firmware.  
- For Blockbuster, visit  
• You cannot create Blockbuster account on this  
unit.  
• To deactivate the connection to Blockbuster,  
select “Deactivatein “Configure.  
• For questions regarding Blockbuster service,  
Before Activating the Connection to  
Blockbuster  
After creating a Blockbuster account, follow  
the following procedure before activating the  
connection to Blockbuster.  
1. Connect this unit to the Internet.  
• Refer to “Connection to the Networkon page  
12.  
Guide to Blockbuster Menu Screen  
Blockbuster  
2. Set up the necessary network connection  
settings.  
• Refer to “Network Connectionon page 39.  
1
2
Activating the Connection to Blockbuster  
In order to watch movies and TV episodes  
streamed instantly from Blockbuster via the  
Internet, you must activate the connection  
between this unit and your Blockbuster account.  
1. On your PC, visit following website and log  
into your account to get the activation code.  
• Follow the instruction given by the website.  
• Take a note of the activation code which  
appears on the PC.  
Browse  
Search  
My Library  
My Favorites  
Configure  
Help  
3
4
5
6
1 Browse :  
2 Search:  
3 My Library :  
To access the movie list  
To access search screen  
To access the list of  
rented or purchased  
movies / TV episodes  
To access your favorite  
list  
To access configure  
menu  
To access the help page  
- For Blockbuster, visit  
2. On this unit, press [BLUE] while opening  
screen is displayed.  
• For opening screen, refer to page 9.  
• Menu screen of Blockbuster will appear.  
• For the first time only, “Network Service  
Disclaimerscreen will appear. After  
confirming the content, use [s/B] to select  
“Agree, then press [OK].  
4 My Favorites :  
5 Configure :  
6 Help :  
Renting or Purchasing Movies / TV Episodes  
After you set up the connection to Blockbuster,  
you can rent or purchase movies / TV episodes  
and watch directly on your TV.  
1. Press [BLUE] while opening screen is  
displayed.  
• For opening screen, refer to page 9.  
2. Use [K/L/s/B] to select “Browse, then  
press [OK].  
• List of movies / TV episodes will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
3. Use [K/L/s/B] to select the desired title,  
then press [OK].  
Note  
• Depending on your network environment and  
speed, the playback may be paused or stopped.  
To improve playback condition, use high speed  
broadband Internet connection (For details,  
contact your Internet service provider.)  
• Title details screen of the selected title will  
appear.  
4. Use [s/B] to select “Rent” or “Buy, then  
press [OK].  
• Checkout screen will appear.  
5. Use [s/B] to select “Submit Order, then  
press [OK].  
VUDU Operations  
With this unit, you can enjoy VUDU HD on-  
demand movies / TV episodes and Internet  
applications.  
- For complete instructions on using VUDU  
an updated in-depth online manual.  
6. Use [s/B] to select “Play Now, then press  
[OK].  
• If you want to continue browsing, select  
“Continue Browsingand press [OK] to go  
back to “Browse.  
Note  
Before Activating VUDU  
• If you select “Add to My Favoritesin title details  
screen, the title will be added to your “My  
Favorites.  
Follow the following procedure before activating  
VUDU.  
1. Connect this unit to the Internet.  
• Refer to “Connection to the Networkon page  
12.  
• In most cases, rented movies or TV episodes  
are available for 24 hours from the playback  
starting time.  
• Broadband Internet connection of 8 Mbps or  
faster is recommended.  
Searching Movies / TV Episodes  
2. Set up the necessary network connection  
settings.  
From the search screen, you can search for movies  
/ TV episodes by entering search words.  
1. Follow step 1 in “Renting or Purchasing  
Movies / TV Episodes” on page 26.  
2. Use [K/L] to select “Search, then press [OK].  
• Keypad screen will appear.  
• Refer to “Network Connectionon page 39.  
Activating VUDU  
After you set up the network connection, you  
must set up a VUDU account and activate this unit  
before watching VUDU movies.  
1. Press [RED] while opening screen is  
displayed.  
3. Use [K/L/s/B] to select characters, then  
press [OK].  
• When you enter a letter, titles that start with  
the letter will be displayed on the right side  
of the screen.  
• For opening screen, refer to page 9.  
• VUDU App Home screen will appear.  
• For the first time only, “Network Service  
Disclaimerscreen will appear. After  
confirming the content, use [s/B] to select  
“Agree, then press [OK].  
4. Use [K/L/s/B] to select a desired title from  
the search result on the right side of the  
screen, then press [OK].  
• Title details screen of the selected title will  
appear.  
2. Use [K/L/s/B] to select “VUDU movies,  
then press [OK].  
Watching Rented or Purchased Movies / TV  
Episodes  
• VUDU welcome screen will appear.  
3. Select “SIGN Up Now, then press [OK].  
4. Enter the e-mail address you would like  
associated with your VUDU account. After  
you enter your e-mail address correctly,  
select “Done” and press [OK].  
1. Follow step 1 in “Renting or Purchasing  
Movies / TV Episodes” on page 26.  
2. Use [K/L/s/B] to select “My Library, then  
press [OK].  
• Activation e-mail will be sent to the e-mail  
address. (You must have access to the e-mail  
address to activate VUDU.)  
• List of rented or purchased movies / TV  
episodes will appear.  
3. Use [K/L/s/B] to select a desired title, then  
press [OK].  
5. Follow directions in the activation e-mail to  
complete your account activation.  
Note  
4. Use [s/B] to select “Play Now, then press  
[OK].  
• You can deactivate the connection to VUDU  
by setting “Vudu Deactivateto “Yes. (Refer to  
page 44.)  
• For questions regarding VUDU service, please  
contact VUDU Customer Care at  
1-888-554-VUDU (8838) or visit  
• If you want to resume playback, select “Resume  
Playand press [OK].  
• To stop the playback, press [C(stop)].  
• To pause the playback, press [F(pause)].  
• To go back to the opening screen, press  
[TOP MENU] or [SETUP].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Guide to VUDU Menu Screen  
Renting or Purchasing VUDU Movies / TV  
Episodes  
App Home Screen  
After activating this unit, you are ready to  
purchase or rent movies / TV episodes and watch  
directly on your TV.  
App Home screen is the entry point to VUDU  
applications including VUDU movies. To call up  
the screen, press [RED] while opening screen is  
displayed.  
1. Press [RED] while opening screen is  
displayed.  
• For opening screen, refer to page 9.  
2. Use [K/L/s/B] to select “VUDU movies,  
then press [OK].  
2
• VUDU movies home screen will appear.  
3. Use [K/L/s/B] to select “Most Watched” ,  
“New on Vudu” or “Explore Catalog, then  
press [OK].  
1
3
4. Use [K/L/s/B] to select the desired movie  
or TV episode, then press [OK].  
• “MOVIE DETAILSscreen will appear.  
5. Use [K/L] to select “Rent” or “Own, then  
press [OK].  
1. Viewing mode : List of different viewing  
modes for App Home  
6. Use [K/L] to select a desired quality option,  
then press [OK].  
applications  
• Select the quality option that best suits your  
network environment.  
2. Promotional  
graphics :  
Placeholder where  
promotional graphics are  
displayed  
Video Resolution  
480p  
HD 720  
Minimum Bit Rate  
1 Mbps  
2.25 Mbps  
4.5 Mbps  
SD  
3. Application list : Grid of applications in the  
selected viewing mode  
HDX 1080p  
VUDU Movies Home Screen  
When you select “VUDU moviesin App Home  
screen, VUDU movies home screen will appear.  
7. Use [K/L] to select “Rent for $*.**” or “Buy  
for $*.**, then press [OK] to confirm your  
rental or purchase.  
1
2
4
3
8. Select “Watch Now” to start playing the  
movie / TV episode.  
• If you want to return to the “MOVIE DETAILS,  
select “Watch Later.  
Note  
• Available quality options differ depending on  
the content.  
1. Most Watched : To access the list of popular  
movies / TV episodes on  
VUDU  
2. New on Vudu : To access the list of newly  
available movies /TV  
episodes  
3. Explore Catalog : To access the list of options  
to search movies / TV  
episodes  
To access the list of rented or  
purchased contents  
4. My Vudu :  
Note  
• You can go back to VUDU movies home screen  
by pressing [BLUE] while you are using VUDU  
movies features.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Watching Rented or Purchased VUDU Movies /  
TV Episodes  
FUNCTION SETUP  
In the setup menu you can change the setting for  
audio, video, language, etc. You cannot change  
the setting during playback.  
Setting items displayed in gray indicates they are  
not available under the conditions at the time.  
1. Follow steps 1 to 2 in “Renting or Purchasing  
VUDU Movies / TV Episodes” on page 28.  
2. Use [s/B] to select “My Vudu, then press  
[OK].  
3. Use [s/B] to select “My Rentals, My  
Movies” or “My TV Shows, then press [OK].  
4. Use [K/L] to select a desired movie / TV  
episode, then press [OK].  
Quick  
Quickmenu contains setting items extracted  
from “ Custommenu which may be used  
frequently.  
5. Select “Watch ***” to start watching the  
movie / TV episode.  
1. In stop mode, press [SETUP].  
2. Use [K/L] to select , then press [OK].  
3. Use [K/L] to select your desired setting  
items.  
• During playback, use following buttons to  
control the playback.  
Button  
[F(pause)]  
Action  
Pause the playback.  
Quick  
Mode Select  
HDMI Audio Out  
Disc  
[C(stop)]  
Stop the playback.  
HDMI Multi(Normal)  
HDMI Video Resolution Auto  
Player Menu  
Network Selection  
English  
Wired  
[E(reverse)] /  
[D(forward)]  
Fast reverse or forward  
the playback.  
[B(play)]  
Resume the playback.  
4. Follow the procedure below depending on  
the setting items.  
[YELLOW]  
Display the info banner  
which shows the  
A) If “Bdoes not appear on the right side of  
the setting items when you select the items:  
Press [OK] repeatedly to change options.  
B) If “Bappears on the right side of the setting  
items when you select the items:  
1) Press [OK].  
playback information.  
[TOP MENU]  
Go back to opening  
screen.  
Note  
2) Use [K/L] to select options, then press  
[OK].  
• Available buttons and actions may subject to  
change without notice.  
• Use [s] or [RETURN] to go back to the  
previous screen.  
Using Internet Applications  
In addition to VUDU movies, you can use various  
kinds of Internet applications.  
5. Press [SETUP] to exit.  
1. In App Home screen, use [K/L/s/B] to  
select a desired application and press [OK].  
2. Follow the instructions on screen of the  
selected application.  
Note  
• Available applications may change without  
notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
- inside the parentheses next to “Autowill be  
the language which is currently selected by  
your TV.  
Custom  
Custommenu contains all the setting items.  
1. In stop mode, press [SETUP].  
2. Use [K/L] to select , then press [OK].  
3. Use [K/L] to select your desired setting  
category, then press [OK].  
: Language  
• For “Audio, Subtitle, and “Disc Menu, if you  
select “Other, enter the 4-digit-number code for  
the desired language. (Refer to “Language Code  
Liston page 48.) Only the languages supported  
by the disc can be selected.  
: Video  
: Audio  
: Parental  
Video  
: Others  
• For “Parentalmenu, follow the procedure on  
page 35.  
Video  
4. Use [K/L] to select your desired setting  
items.  
TV Aspect  
16:9 Wide  
HDMI Video Resolution Auto  
5. Follow the procedure below depending on  
the setting items.  
HDMI Deep Color  
Progressive Mode  
Still Mode  
Auto  
Auto  
Auto  
A) If “Bdoes not appear on the right side of  
the setting items when you select the items:  
Press [OK] repeatedly to change options.  
B) If “Bappears on the right side of the setting  
items when you select the items:  
1) Press [OK].  
• To select the setting items and options, refer to  
Customon page 30.  
• “ Quickmenu consists of the setting menus  
frequently used, and they are accompanied  
2) Use [K/L] to select options, then press  
[OK].  
• Use [s] or [RETURN] to go back to the  
previous screen.  
with  
Setting items  
TV Aspect  
.
Descriptions  
6. Press [SETUP] to exit.  
Sets the picture size  
according to aspect  
ratio of the connected  
TV.  
Language  
Language  
HDMI Video Resolution Sets the HDMI video  
Audio  
Subtitle  
Original  
Off  
resolution.  
HDMI Deep Color  
Progressive Mode  
Sets whether to output  
the picture from HDMI  
OUT jack with Deep  
Color or not.  
Sets the optimum  
progressive mode for  
the image material  
output from HDMI OUT  
jack.  
Disc Menu  
Player Menu  
English  
English  
• To select the setting items and options, refer to  
Customon page 30.  
• “ Quickmenu consists of the setting menus  
frequently used, and they are accompanied  
with  
Setting items  
Audio  
Still Mode *1  
Adjusts picture  
resolution and quality in  
still mode.  
.
Descriptions  
*1) An individual picture on the TV screen is called  
“Frame, which consists of two separate images  
called “Field. Some pictures may be blurred at  
the auto setting in “Still Modesetting due to  
their data characteristics.  
Sets the language for  
audio.  
Subtitle  
Sets the language for  
subtitle.  
Sets the language for  
disc menu or pop-up  
menu.  
Disc Menu  
Sets the language for  
on-screen display.  
Player Menu *1  
*1) “Autofor “Player Menuactivates the Get & Set  
Menu Language function. Refer to page 38.  
- “Autois available only when “fun-Link (HDMI  
CEC)is set to “On.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
Note for “HDMI Video Resolution”  
Setting items  
Descriptions  
• Even if you set “HDMI Video Resolutionsetting  
to “Auto, when this unit is connected to a DVI  
compatible display devices with an HDMI-DVI  
cable, 480p signal will be output.  
BD Audio Mode  
For BD, selects whether  
to output the secondary  
and interactive audio  
with primary audio if it  
is available or only the  
primary audio. Refer to  
“Setting the BD Audio  
Modeon page 24.  
• Video and audio signals may be distorted  
temporarily when switching to / from the HDMI  
output mode.  
• You cannot change the video resolution during  
playback of Blu-ray Discs or AVCHD files. To  
change the resolution, stop playback.  
• In order to get natural and high quality film  
reproduction of 24-frame film material, use  
an HDMI cable (High Speed HDMI cable  
is recommended) and select “Autoif the  
connected TV is compatible with 1080p24  
frame input.  
Sets the audio format  
for the audio output  
from HDMI OUT jack.  
Refer to page 32.  
HDMI Audio Out *1  
Down Sampling  
Sets the digital audio  
output when playing  
back BD or DVD  
recorded in LPCM.  
DRC  
Sets whether to  
• Even if the connected TV is compatible with  
1080p24 frame input and you set “HDMI Video  
Resolutionsetting to “Auto, when the contents  
of the disc are not compatible for 1080p24  
frame, 1080p60 frame will be output.  
• If the picture is not output properly to the TV  
because of “HDMI Video Resolution, press and  
hold [B PLAY] on the front panel for more than  
5 seconds. Both settings will be reset to the  
default automatically.  
• For AVCHD, 24-frame film material will be  
output as 60 frame, even if the connected  
device is compatible with 1080p24 frame  
input and “HDMI Video Resolutionis set to  
“1080p24”or “Auto.  
compress the range of  
sound volume (dynamic  
range control) when  
Dolby Digital, Dolby  
Digital Plus or Dolby  
TrueHD audio is played  
back.  
When “Autois  
selected,this unit  
detects DRC setting of  
the disc and set “DRC”  
setting to “Onor “Off”  
automatically when the  
discs recorded in Dolby  
TrueHD format are in  
playback.  
*1) Under following circumstances, “HDMI  
Multi(Normal)and “HDMI Multi(LPCM)are  
not available.  
Audio  
Audio  
- HDMI cable is not connected to HDMI OUT  
jack.  
BD Audio Mode  
HDMI Audio Out  
Down Sampling  
DRC  
Mix Audio Output  
HDMI Multi (Normal)  
On  
Auto  
- Connected TV is off.  
- Connected TV is not compatible with audio  
output.  
• To select the setting items and options, refer to  
Customon page 30.  
• “ Quickmenu consists of the setting menus  
frequently used, and they are accompanied  
with  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
HDMI Audio Out Setting  
When using HDMI connections make “HDMI Audio Outsetting in “Audiomenu according to the  
specifications of the device to be connected. Refer to page 31. Normally, set it to “HDMI Multi(Normal)so  
that the unit automatically picks and outputs the best audio format suited to your connected device.  
Device to be connected  
“HDMI Audio Out”  
Output HDMI audio signal  
setting  
Device compatible with Dolby  
Digital, Dolby Digital Plus, Dolby  
TrueHD, DTS or DTS-HD decoding  
HDMI Multi(Normal)  
Dolby Digital, Dolby Digital Plus, Dolby  
TrueHD, DTS, or DTS-HD bitstream are  
output from HDMI OUT jack. Make the  
speaker settings on the connected AV  
amplifier, etc.  
Device compatible with 3 or more HDMI Multi(LPCM)  
channels of audio inputs (not  
Dolby Digital, Dolby Digital Plus,  
Dolby TrueHD, DTS or DTS-HD  
compatible)  
Multi-channel audio signals are output  
from HDMI OUT jack. Make the speaker  
settings with the speaker setting  
items appear after you select “HDMI  
Multi(LPCM).  
HDMI audio will be mute, and Dolby  
Digital / DTS bitstream or LPCM will be  
output from DIGITAL OUT jack depending  
on “Digital Outsetting.  
HDMI connection to a TV and  
digital audio connection (coaxial)  
to an AV amplifier  
Audio Mute  
Note  
• The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and  
bit length) maybe limited by the device that is connected.  
• Among the devices that support HDMI, some do not support audio output (e.g. projectors). In  
connections with device such as this unit, audio signals are not output from HDMI OUT jack.  
• Video and audio signals may be distorted temporarily when switching to / from the HDMI output  
mode.  
Digital Out Setting  
When “Audio Muteis selected in “HDMI Audio Outsetting, HDMI audio signal will be mute and the  
audio signals output from DIGITAL OUT jack changes depending on “Digital Outsetting.  
Quick HDMI Audio Out Audio Mute Digital Out  
Bitstream* :  
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS® or DTS-HD®,  
the corresponding core stream (Dolby Digital or DTS®) are output.  
LPCM :  
LPCM signal will be output from DIGITAL OUT jack.  
• This setting is not effective when the HDMI audio signal is output.  
Note  
• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set  
“HDMI Audio Outsetting to “HDMI Multi(LPCM).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
Speaker Setting (Available when you have HDMI cable connected to HDMI OUT jack)  
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.  
To make the most of its feature, set up your speakers appropriately by referring to the following table.  
How to navigate through “HDMI Multi(LPCM)”:  
1) Use [K/L] to select your desired menu item then  
press [OK].  
2) Use [K/L] to select your setting items.  
Front speaker (left)  
Front speaker (right)  
Subwoofer  
• Press [RETURN] to go back to the previous screen.  
3) Use [s/B] to select desired options. (Except  
for “Test Tone, Default” and setting options in  
“Speaker Size” setting.)  
Center speaker  
For setting options in “Speaker Size” setting:  
Press [OK] to select desired options.  
For “Test Tone”:  
Use [s/B] to select “Off, Manual” or “Auto,  
then press [OK].  
Surround  
speaker (left)  
Surround  
speaker (right)  
• The test tone will be output. If you select  
“Manual, use [K/L] to select desired speaker,  
then use [s/B] to adjust the volume. If you  
select “Auto, use [s/B] to adjust the volume of  
the speaker that outputs the test tone.  
• If you want to stop the test tone, press [RETURN].  
Surround  
back speaker  
(left)  
Surround  
back speaker  
(right)  
e.g.) basic layout with 7.1-channel surround system  
For “Default”:  
Press [OK] to reset to the default.  
4) Press [SETUP] to exit.  
<Speaker setting for the audio signal output from HDMI OUT jack>  
Quick HDMI Audio Out HDMI Multi(LPCM)  
Custom Audio HDMI Audio Out HDMI Multi(LPCM)  
Menu  
Setting items  
Descriptions  
Speaker Size  
Front  
Center  
Subwoofer  
Surround  
Large:  
Selects the desired speaker to  
set. Then change the setting by  
referring to the descriptions.  
For the large speakers with strong  
low frequency reproduction  
capabilities.  
Small:  
Surround Back  
For the small speakers which do  
not provide strong bass sound.  
You cannot change the setting of  
“Subwoofer. Speakers which are  
not supported by the connected  
device will be displayed in gray.  
Default  
Select “Default, then press [OK]  
to reset  
“Speaker Sizesetting to the  
default.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Menu  
Channel Level  
Setting items  
Test Tone:  
Descriptions  
Select “Offto deactivate “Test  
Tests or sets the volume for each “Test Toneis the test tone which Tone. Select “Manual, then press  
speaker.  
can be output from the speakers [OK] to manually set the volume for  
so you can adjust the volume for the desired speaker.  
each speaker.  
Select “Auto, then press [OK] to  
automatically output the test tone  
from each speaker.  
Front Lch  
Center  
Subwoofer  
Front Rch  
Surround Rch  
Surround Back Rch  
Surround Back Lch  
Surround Lch  
Default  
If you have selected “Manualin  
Test Tone, select the desired  
speaker to set and adjust the  
volume for the selected speaker. If  
you select “Autoin “Test Tone, test  
tone will automatically be output  
in order. Adjust the volume of the  
speaker that outputs the test tone.  
Select “Default, then press [OK] to  
reset “Channel Levelsetting to the  
default.  
Delay Time  
Distance  
Set the desired measure system.  
This measure system will be used  
for “Delay Timesetting.  
This is a parameter for optimizing  
the timing at which the sound  
outputs from the speakers  
according to the distance from  
the listening position.  
Press [OK] to switch the settings.  
Front  
Center  
Surround  
Surround Back  
Default  
Select the distance from the  
listening position to the speaker to  
get the ideal delay time.  
Select “Default, then press [OK] to  
reset “Delay Timesetting to the  
default.  
• For “Speaker Sizesetting, the settings of each speaker size may be adjusted automatically  
corresponding to each setting. (e.g. If “Frontis set to “Small, you cannot set “Center, Surround, and  
“Surround Backto “Large.)  
• For “Delay Time, the difference between the value of the “Front, Surroundand “Surround Back”  
setting cannot exceed 15 ft (4.5m), and the difference between the value of the “Frontand “Center”  
setting cannot exceed 5 ft (1.5m).  
• For “Delay Time, the value of the “Center, Surroundand “Surround Backsetting cannot exceed the  
value of the “Frontsetting.  
• For “Delay Time, the setting of “Center, Surroundand “Surround Backwill be changed automatically  
to the setting value of the “Front. (e.g. If the “Frontis set to 60ft (18m), the setting of “Center,  
“Surroundand “Surround Backwill be changed to 60ft (18m) as well.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
Parental  
Ratings control allows you to set a limit, which prevents your children from viewing inappropriate  
materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter  
a password before playing back the disc.  
Parental  
BD Rating Level  
DVD Rating Level  
Password Change  
All  
All  
1. Use [K/L] to select , then press [OK].  
2. Use [the Number buttons] to enter your 4-digit password.  
For the first time use: Use [the Number buttons] to enter any 4-digit number (except for 4737), then  
press [OK]. That number will be used as the password from the second time. Record your password in  
case you forget it.  
• If you forget the password, enter [4], [7], [3], [7]. The password will be cleared and rating level will be  
set to “All.  
• While you input the password, press [CLEAR] to clear the number, then re-enter the password.  
3. Proceed to A – C  
A) BD Rating Level  
1) Use [K/L] to select “BD Rating Level, then press [OK].  
2) Use [K/L] to select your desired option, then press [OK].  
“All”:  
To release the limitation.  
To set the age limitation.  
“Age Setting”:  
• After selecting “Age Setting, use [the Number buttons] to enter the age from 0 – 254.  
(e.g. for age 15, press [0], [1], [5])  
3) Press [SETUP] to exit.  
B) DVD Rating Level  
1) Use [K/L] to select “DVD Rating Level, then press [OK].  
2) Use [K/L] to select your desired level, then press [OK].  
3) Press [SETUP] to exit.  
RATING EXPLANATIONS  
All:  
Parental Control is inactive; all discs can played back.  
DVD software of any grades (adult / general / children) can be played back.  
No one under 18 admitted.  
8 [Adult] :  
7 [NC-17] :  
6 [R] :  
5 [PGR] :  
4 [PG-13] :  
3 [PG] :  
2 [G] :  
Restricted; under 18 requires accompanying parent or adult guardian.  
Parental guidance recommended.  
Unsuitable for children under 13.  
Parental guidance suggested.  
General audience.  
1 [Kid Safe] : Suitable for children.  
C) Password Change  
1) Use [K/L] to select “Password Change, then press [OK].  
2) Enter a new 4-digit password, then press [OK].  
3) Press [SETUP] to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
Others  
Others  
Angle Icon  
On  
fun-Link (HDMI CEC)  
Mode Select  
Off  
Disc  
Network Connection  
Software Update  
• To select the setting items and options, refer to “ Customon page 30.  
• “ Quickmenu consists of the setting menus frequently used, and they are accompanied with  
• Settings with (*) are the default.  
.
Setting items  
Options / Descriptions  
Angle Icon  
On*:  
The angle icon appears on the TV screen when playing back the scene with various angle.  
Off:  
The angle icon disappears on the TV screen.  
fun-Link (HDMI  
CEC)  
On  
Off*  
Sets whether to  
utilize the fun-  
Link (HDMI CEC)  
function. Refer to  
page 38.  
Disc*:  
Mode Select  
Select this when you play back a disc.  
SD Card:  
Select this when you play back an SD Memory Card.  
Network:  
Selects the media  
to playback.  
Select this when you use Netflix / Blockbuster / VUDU feature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Setting items  
Network  
Connection  
• Refer to page  
39 for more  
information.  
Options / Descriptions  
Connection  
Test  
Perform a network connection  
test. After you change IP address  
or DNS setting, always perform  
this test.  
If you select “Easy, connection  
test will automatically start.  
Set the IP address. In most cases,  
you can connect to the Internet  
without making any changes to  
the default setting.  
Network  
Selection  
Wired*  
Easy*  
Custom  
IP Address Auto(DHCP)*  
Setting  
Manual  
IP Address  
Subnet Mask  
Default  
Gateway  
DNS Setting Auto(DHCP)*  
Manual  
Set the DNS setting. In most  
cases, you can connect to the  
Internet without making any  
changes to the default setting.  
Primary  
DNS  
Secondary  
DNS  
Proxy  
Setting  
Do Not Use*  
Use  
Set the proxy server. In most  
cases, you can connect to the  
Internet without using proxy  
server.  
Proxy Address  
Proxy Port  
Connection Auto*  
Set the connection speed. In  
most cases, you can connect to  
the Internet without making any  
changes to the default setting.  
Speed  
10BASE Half  
10BASE Full  
100BASE Half  
100BASE Full  
Allow*  
BD-Live  
Setting  
You can restrict Internet access  
when BD-Live functions are used.  
Limited Allow  
Prohibit  
MAC Address  
Wireless Find wireless WEP/WPA Authentication  
You can check the MAC address.  
Set up the connection to the  
wireless router and enter the  
WEP/WPA key required for  
Wireless  
Router  
network  
Manually  
enter your  
SSID  
wireless network connection.  
Wireless Router Status  
You can check the current status  
of the wireless router setting.  
If you select “Easy, connection  
test will automatically start.  
Set the IP address. In most cases,  
you can connect to the Internet  
without making any changes to  
the default setting.  
Set the DNS setting. In most  
cases, you can connect to the  
Internet without making any  
changes to the default setting.  
Set the proxy server. In most  
cases, you can connect to the  
Internet without using proxy  
server.  
Advanced Easy*  
Settings  
Custom  
IP Address Setting  
DNS Setting  
Proxy Setting  
BD-Live Setting  
MAC Address  
You can restrict Internet access  
when BD-Live functions are used.  
You can check the MAC address.  
Deactivate the network  
Disable  
No*  
Yes  
connection.  
Disclaimer  
Displays the network service  
disclaimer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Setting items  
Options / Descriptions  
Software Update Current Version  
Allows you to  
update this unit’s  
firmware. Refer to  
page 43.  
Indicates the current firmware version.  
Disc Update No*  
Allows you  
to update  
this unit’s  
software  
using a  
Yes  
disc.  
Network  
Update  
You can  
No*  
Yes  
update the  
software  
version by  
connecting  
this unit to  
the Internet.  
fun-Link (HDMI CEC)  
fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This  
function may not work properly depending on a device to be connected. When “fun-Link (HDMI CEC)”  
setting is set to “On, functions listed below will be available.  
One Touch Play  
When this unit is turned on, the TV also is turned on and the appropriate external input channel will  
be selected automatically. The appropriate external input channel can also be selected on your TV  
automatically when you press [B (play)], [H (skip)], [G (skip)], [the Number buttons], [DISPLAY],  
[TOP MENU], or [POP MENU / MENU] when the unit’s power is on. (Buttons other than [B (play)] works  
only with discs inserted.)  
Standby  
When you press and hold [STANDBY/ON y] for 2 seconds, it turns off the power of the TV first and then  
turns off the power of this unit also.  
When the connected fun-Link (HDMI CEC) compatible display device is turned off, this unit may also turn  
off together.  
System Information  
Get & Set Menu Language  
The unit recognizes the OSD language set for the TV and automatically sets the same language as the  
player menu language (OSD menu language) for this unit.  
• This feature is available only when “Auto(XXXX)is selected in “Player Menuin the setup menu.  
(Refer to “Player Menuon page 30.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
• If the connection test fails, you may need to  
change the MAC address settings on your  
router. You can check the MAC address of this  
unit on “Customscreen. (Refer to “Custom  
(Wired)“ on page 39.)  
• When connecting this unit directly to a modem  
for the first time or connecting it to a modem  
which was previously connected to any other  
network device(e.g. a router, PC, etc.), you may  
have to power cycle the modem to reset the  
settings on the modem.  
Network Connection  
[SETUP] ”Others"“Network Connection”  
Set up network connection settings in order  
to use BD-Live, Netflix / Blockbuster / VUDU or  
network update function.  
Connection Test  
After you enable a network connection or  
change the network settings, always perform  
the connection test to check if the connection is  
correctly made.  
• “Connection Testis not available when  
“Disableis selected in “Network Connection.  
1. In “Network Connection” menu, use [K/L] to  
select “Connection Test, then press [OK].  
Connection test will start automatically and  
the test result will appear right after the  
connection test finishes.  
Network Selection  
Wired  
• “Testing...: The test is in progress.  
• “Pass: Connection test is successfully  
completed.  
Select “Wiredif you made a wired connection and  
set the setting to “Easy”(wired) or “Custom”(wired),  
in accordance with your network environment.  
<Easy (Wired)>  
Network settings are set to the following settings  
initially. (In most cases, you can connect to the  
Internet without making any changes to the  
default settings.)  
• “Fail: Connection test failed. Check the  
connection settings.  
If the connection test passes, press [OK].  
• Confirmation screen of the network selection  
will appear.  
e.g.) Wired connection  
- IP Address Setting  
- DNS Setting  
Auto(DHCP)  
Auto(DHCP)  
Do Not Use  
Auto  
Others  
Connection Test  
- Proxy Setting  
- Connection Speed  
- BD-Live Setting  
Network Selection  
Wired  
Allow  
If you want to set the network settings back to  
the default settings as above (except “BD-Live  
Setting”), follow the procedure below.  
then press ‘OK’  
.
1. In “Network Connection” menu, use [K/L] to  
select “Network Selection, then press [OK].  
2. Use [K/L] to select “Wired, then press [OK].  
3. Use [K/L] to select “Easy, then press [OK].  
• The unit will start the connection test  
automatically and the test result will appear  
right after the test finishes.  
4. Press [OK] to activate the network  
settings and set the network connection  
automatically. Press [SETUP] to exit.  
Note  
Press [OK] again to display the confirmation  
screen of network settings.  
Others  
Connection Test  
IP Address  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
Subnet Mask  
Default Gateway  
Primary DNS  
Secondary DNS  
then press ‘OK’  
.
• The setting of “BD-Live Settingwill not be  
set back to the default, even if you follow the  
procedure.  
2. Press [OK], then press [SETUP] to exit.  
<Custom (Wired)>  
Note  
In following cases, select “Custom”(wired) to set  
each setting as necessary.  
• If the connection test passes, you are ready to  
use BD-Live, Netflix / Blockbuster / VUDU or  
network update function using the Internet  
without making any additional settings.  
- When connection test failed with the setting  
of “Easy”(wired).  
- When instructed by your Internet service  
provider to make specific settings in  
accordance with your network environment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
To set the network setting to “Custom”(wired),  
follow the following procedure.  
1. Follow steps 1 to 2 in “Easy (Wired)” on  
page 39.  
c) Use [K/L] to select “Primary DNSor “Secondary  
DNS, then press [OK]. DNS setting screen will  
appear. Enter primary DNS and secondary DNS  
with cursor buttons and number buttons.  
2.Use [K/L] to select “Custom, then press [OK].  
- Setting menu of “Custom”(wired) will be  
displayed.  
Others  
DNS Setting  
Primary DNS  
3. Use [K/L] to highlight the item you want to  
set.  
xxx . xxx . xxx . xxx  
Secondary DNS  
• ”MAC Addressis for viewing only and cannot  
be selected.  
xxx . xxx . xxx . xxx  
4. Find the instruction for the item from the  
following, and set the item.  
then press ‘OK’  
IP Address Setting / DNS Setting  
1. Press [OK] repeatedly to select the desired  
setting.  
• Enter the DNS addresses provided by your  
Internet provider.  
• If the DNS address is unknown, check  
the DNS address of other devices (e.g. PC  
connected via LAN cable) and assign the  
same DNS address.  
“Auto(DHCP): If your router has DHCP server  
function, select “Auto(DHCP).  
“Manual:  
If your router does not have  
DHCP server function, select  
“Manual.  
d) After you enter all correctly, press [OK].  
• Confirmation message will appear. Select  
Yesto complete the settings.  
2. Press [RETURN] to go back to the previous  
screen, or press [SETUP] to exit.  
If you select “Manual, follow the following  
instruction to set the IP address and DNS.  
a) Use [K/L] to select “IP Address, Subnet Mask”  
or “Default Gateway, then press [OK]. IP address  
setting screen will appear. Enter IP address,  
subnet mask and default gateway with cursor  
buttons and number buttons.  
Note  
• The range of input numbers is between 0 and  
255.  
• If you enter a number larger than 255, the  
number will automatically be 255.  
Others  
IP Address Setting  
• The manually entered addresses will be saved  
even if you change the setting to “Auto(DHCP).  
• When you enter a wrong number, press [CLEAR]  
to cancel. (The number will be back to “0.)  
• If you want to enter 1 or 2 digit number in one  
cell, press [B] to move on to the next cell.  
• If the entered IP address or the default gateway  
or primary DNS addresses is same as the  
default setting, IP address setting will be set to  
“Auto(DHCP). (The manually entered number  
will be saved.)  
• When IP address setting is set to “Manual, the  
setting of DNS setting will automatically be  
“Manualand when IP address setting is set to  
“Auto(DHCP), you can set either “Auto(DHCP)”  
or “Manualfor DNS setting.  
IP Address  
xxx . xxx . xxx . xxx  
Subnet Mask  
xxx . xxx . xxx . xxx  
Default Gateway  
xxx . xxx . xxx . xxx  
then press ‘OK’  
• Enter the IP address number after checking  
the specifications of your router.  
• If the IP address is unknown, check the IP  
address of other devices. (e.g. PC connected  
via LAN cable) and assign a different number  
from those of other devices.  
b) After you enter all correctly, press [OK].  
• Confirmation message will appear. Select  
Yesto complete the settings.  
Others  
IP Address Setting  
Proxy Setting  
1.Press [OK] repeatedly to select the desired  
setting.  
Is Setting OK?  
IP Address  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
xxx.xxx.xxx.xxx  
• For default settings, select “Do Not Use.  
• If you need to change the proxy setting as  
instructed by your Internet service provider  
to set the designated proxy address and port,  
select “Use.  
Subnet Mask  
Default Gateway  
No  
Yes  
If you select “Use, follow the following  
instructions to set the proxy address and  
proxy port.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
a) Use [K/L] to select “Proxy Address, then press  
[OK]. Proxy address setting screen will appear.  
Enter proxy address.  
• For proxy port, certain ports might be closed,  
blocked or unusable depending on your  
network environment.  
• The keyboard screen will appear.  
Connection Speed  
You can set connection speed as your preference.  
(The default setting is “Auto.)  
1. Press [OK] to show the options for  
“Connection Speed.  
Others  
Proxy Address  
_
2. Use [K/L] to select the desired setting, then  
press [OK].  
1
a
k
u
2
b
l
3
c
m
w
4
d
n
x
5
e
o
y
6
f
p
z
7
g
q
.
8
h
r
9
i
s
_
0
j
t
“Auto”:  
v
-
OK  
Set the appropriate connection speed  
automatically, in accordance with your network  
environment.  
Clear  
All Clear  
a/A/@  
OK  
[K/L/s/B] :  
Move the highlight.  
“10BASE Half”:  
[the Number buttons] : Enter number.  
Set the connection speed to “10BASE Half.  
“10BASE Full”:  
[OK] :  
Enter the highlighted number/  
word.  
Set the connection speed to “10BASE Full.  
“100BASE Half”:  
[RED] :  
[GREEN] :  
Clear the entered number or  
word.  
Set the connection speed to “100BASE Half.  
“100BASE Full”:  
Clear all the entered numbers  
or words.  
Set the connection speed to “100BASE Full.  
3. Press [RETURN] to go back to the previous  
screen, or press [SETUP] to exit.  
Note  
[BLUE] :  
[YELLOW] :  
Switch between abc ? ABC ? @!?  
Set the entered number or  
word.  
• Choose a connection speed in accordance with  
your network environment.  
• The network connection may be disabled  
depending on the device, when the settings are  
changed.  
b) After you enter proxy address correctly, press  
[YELLOW].  
• Confirmation message will appear. Select  
Yesto complete the settings.  
Others  
Proxy Address  
BD-Live Setting  
You can limit Internet access for BD-Live discs.  
(The default setting is “Allow.)  
1. Press [OK] to show the options for “BD-Live  
Setting.  
Is Setting OK?  
xxxxx  
2. Use [K/L] to select the desired setting, then  
press [OK].  
No  
Yes  
“Allow”:  
Internet access is permitted for all BD-Live  
contents.  
c) Use [K/L] to select “Proxy Port, then press  
[OK]. Proxy port setting screen will appear. Enter  
proxy port number with number buttons.  
“Limited Allow”:  
Internet access is permitted only for BD-  
Live contents which have content owner  
certificates. Internet access without the  
certificates is prohibited.  
Others  
Proxy Address  
Please select the input Proxy Port.  
then press `OK’  
“Prohibit”:  
Internet access is prohibited for all BD-Live  
contents.  
xxxxx  
3. Press [RETURN] to go back to the previous  
screen, or press [SETUP] to exit.  
MAC Address  
You can check the MAC address of this unit.  
“MAC Addressis for viewing only.  
Wireless  
If you connect this unit to the network wirelessly, select  
“Wirelessand set up necessary settings.  
d) After you enter proxy port correctly, press [OK].  
2. Press [RETURN] to go back to the previous  
screen, or press [SETUP] to exit.  
Note  
• The range of input numbers for the port  
number is between 0 and 65535. (If you enter  
a number larger than 65535, it will be regarded  
as 65535.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
<Wireless Router>  
“None”:  
In order to use a wireless network, you must set  
up the connection to the wireless router.  
Set the authentication setting to “None.  
“WEP”:  
Set the authentication setting to “WEP.  
“WPA-PSK (TKIP)”:  
You must set the wireless router to  
infrastructure mode. Refer to page 13  
for details.  
Set the authentication setting to “WPA-PSK (TKIP).  
“WPA-PSK (AES)”:  
Set the authentication setting to “WPA-PSK (AES).  
“WPA2-PSK (TKIP)”:  
Find wireless network  
Search for wireless networks automatically and  
select the wireless network name (SSID) from the  
list.  
Set the authentication setting to “WPA2-PSK  
(TKIP).  
“WPA2-PSK (AES)”:  
1. In “Network Connection” menu, use [K/L] to  
select “Network Selection, then press [OK].  
2. Use [K/L] to select “Wireless, then press  
[OK].  
Set the authentication setting to “WPA2-PSK  
(AES).  
7. “WEP/ WPA Key” entry screen will appear.  
Enter the WEP/WPA key of the selected  
wireless network using cursor buttons,  
number buttons and color key, then press  
[YELLOW].  
3. Use [K/L] to select “Wireless Router, then  
press [OK].  
4. Use [K/L] to select “Find wireless network,  
then press [OK].  
• Confirmation message will appear. Select “Yes”  
to complete the settings.  
• This unit will start searching for wireless  
networks automatically.  
5. The list of wireless networks will be  
displayed. Use [K/L] to select the  
appropriate wireless network name (SSID),  
then press [OK].  
Others  
Wireless Router  
Is Setting OK?  
SSID  
WEP/WPA Authentication WPA2-PSK(AES)  
WEP/WPA Key  
API  
• This unit will start searching for the  
authentication setting of the selected  
wireless network automatically.  
**************...  
No  
Yes  
Others  
Find wireless network  
AP1  
AP2  
AP3  
AP4  
AP5  
AP6_Test  
8. Following screen will appear. Use [K/L]  
to select “Yes, then press [OK] to go to  
“Advanced Settings.  
• For further operation, refer to “Advanced  
Settingson page 43.  
1/ 2  
Page Down  
Others  
Find wireless network  
If the unit finds the authentication setting of the  
selected wireless network, skip to step 7. If the unit  
fails to find the authentication setting automatically,  
proceed to step 6 to select it manually.  
6. Use [K/L] to select the authentication  
setting of the selected wireless network,  
then press [OK].  
Wireless router settings are incomplete.  
Please use "Advanced Settings" to complete your setup.  
No  
Yes  
Others  
9. Press [SETUP] to exit.  
Find wireless network  
Note  
WEP/WPA Authentication  
None  
WEP  
WPA-PSK (TKIP)  
WPA-PSK (AES)  
WPA2-PSK (TKIP)  
WPA2-PSK (AES)  
• For a wireless network with authentication  
setting, key icon appears to the right hand of  
the wireless network name (SSID).  
• Signal icon shows the strength of the signal.  
• WEP/WPA key appears as asterisks on the  
confirmation screen.  
Manually enter your SSID  
• For a wireless network with authentication  
setting, select the authentication setting,  
according to the security type of the wireless  
network.  
Set up the connection to the wireless router  
manually by entering the wireless network name  
(SSID).  
1. Follow steps 1 to 3 in “Find wireless network”  
• For a wireless network without authentication  
setting, select “None.  
on page 42.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
2. Use [K/L] to select “Manually enter your  
SSID, then press [OK].  
“IP Address Setting” / “DNS Setting”:  
Refer toIP Address Setting / DNS Settingon page 40.  
“Proxy Setting”:  
• Wireless Router Name (SSID) entry screen  
will appear. Enter the wireless network name  
(SSID) using cursor buttons, number buttons  
and color key, then press [YELLOW].  
Refer to “Proxy Settingon page 40.  
“BD-Live Setting”:  
Refer to “BD-Live Settingon page 41.  
“MAC Address”:  
Refer to “MAC Addresson page 41.  
Note  
• You cannot select “Advanced Settingsif  
“Wireless Routersetting is not completed.  
Disable  
Others  
Manually enter your SSID  
Wireless Router Name (SSID)  
_
1
a
k
u
2
b
l
3
c
m
w
4
d
n
x
5
e
o
y
6
f
p
z
7
g
q
.
8
h
r
9
i
s
_
0
j
t
Deactivate all the network connection and  
settings.  
v
-
OK  
Clear  
All Clear  
a/A/@  
OK  
1. In “Network Connection” menu, use [K/L] to  
select “Network Selection, then press [OK].  
2. Use [K/L] to select “Disable, then press  
[OK].  
• List of authentication settings will appear.  
3. Follow steps 6 to 9 in “Find wireless network”  
on page 42.  
3. Press [RETURN] to go back to the previous  
screen, or press [SETUP] to exit.  
Note  
Wireless Router Status  
You can check the current status of “Wireless  
Routersetting.  
• The network connection can be reactivated  
by setting network connection to “Wiredor  
“Wireless.  
1. Follow steps 1 to 3 in “Find wireless network”  
on page 42.  
2. Use [K/L] to select “Wireless Router Status,  
then press [OK].  
Software Update  
• The list of current wireless router settings,  
and the confirmation message will appear.  
Select “Yesto complete the settings.  
3. Press [RETURN] to go back to the previous  
screen, or press [SETUP] to exit.  
[SETUP] “Other"“Software Update”  
This unit lets you update the software yourself  
using a software update disc.  
To update the software, you must first download  
the latest version software to a disc, then execute  
“Software Update.  
<Advanced Settings>  
After you set up the “Wireless Routersetting,  
set the network setting to “Easy(wireless) or  
“Custom”(wireless).  
Current Version  
You can confirm the current software version.  
1. In “Software Update” menu, use [K/L] to  
select “Current Version, then press [OK].  
2. Press [OK] or [RETURN] to exit.  
Easy (wireless)  
To set the network setting to “Easy”(wireless),  
follow the following procedure. For details of this  
setting, refer to “Easy (Wired)on page 39.  
• If you select “Yesin step 7 of “Find wireless  
networkon page 42, skip to step 3.  
1. Follow steps 1 to 2 in “Find wireless network”  
on page 42.  
Disc Update  
1. Prepare a software update disc:  
the latest version software to a blank disc by  
following the directions described on the site.  
• Use a blank disc and download one software  
per disc.  
2. Use [K/L] to select “Advanced Settings, then  
press [OK].  
3. Use [K/L] to select “Easy, then press [OK].  
• For more details on how to download the  
software, please refer to the site.  
Custom (wireless)  
To set the network setting to “Custom”(wireless),  
follow the following procedure.  
• If you select “Yesin step 7 of “Find wireless  
networkon page 42, skip to step 3.  
1. Follow steps 1 to 2 in “Find wireless network”  
on page 42.  
2. In “Software Update” menu, use [K/L] to  
select “Disc Update, then press [OK].  
3. Use [K/L] to select “Yes, then press [OK].  
• Disc tray will open automatically.  
4. Insert the software update disc obtained at  
step 1.  
2. Use [K/L] to select “Advanced Settings, then  
press [OK].  
5. After completing loading disc, confirmation  
message will appear. Select “Yes” and press  
[OK] to start updating.  
3. Use [K/L] to select “Custom, then press  
[OK].  
6. After the disc update finishes, this unit will  
restart and eject the disc.  
• For details of each setting, refer to following  
pages.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
The indicators show the progress status...  
• The version of Netflix will also be updated  
if newer version of Netflix is available when  
updating the software.  
(Success) PLAY indicator lights up.  
STANDBY/ON  
STOP  
PLAY  
Initialize  
Menus to reset player settings, format SD card,  
clear erased BD-ROM data or network settings,  
and deactivate VUDU.  
(Error)* PLAY and STANDBY/ON indicators flash.  
STANDBY/ON  
STOP  
PLAY  
1. In stop mode, press [SETUP].  
2. Use [K/L] to select , then press [OK].  
3. Use [K/L] to select a desired option, then  
press [OK].  
* If the indicator shows Error...  
1) Unplug the AC power cord for about 10  
seconds, re-plug AC power cord and then turn  
the unit on.  
2) Confirm the current software version.  
3) If the software version is updated, the software  
update has succeeded. If not, please try again.  
Note  
• Please do not unplug the AC power cord while  
updating the software.  
• All settings will remain the same even if you  
update the software version.  
• The version of Netflix will also be updated  
if newer version of Netflix is available when  
updating the software.  
Network Update  
You can update the software by connecting the  
unit to the Internet.  
1. In “Software Update” menu, use [K/L] to  
select “Network Update, then press [OK].  
2. Use [K/L] to select “Yes, then press [OK].  
• This unit will then start checking for the latest  
software version.  
3. Confirmation message will appear. Use  
[s/B] to select “Yes, then press [OK].  
• The unit will start downloading the latest  
software version.  
4. When the download completes, confirmation  
message will appear. Press [OK].  
• The unit will start updating the software  
version.  
• It may take a while to complete the updating.  
5. After updating finishes, this unit will restart  
and open the disc tray automatically.  
Note  
• In order to update the software via the Internet,  
you must connect the unit to the Internet and  
set up necessary settings.  
• For network connection, refer to “Connection to  
the Networkon page 12.  
• For network setup, refer to “Network  
Connectionon page 39.  
• Please do not unplug the AC power cord or LAN  
cable while executing the “Network Update.  
• All settings will remain the same even if you  
update the software version.  
• The disc tray will open automatically after  
updating finishes. This is not a malfunction.  
“Setup”:  
Resets the setup menu to the default.  
The setting for “Parental, Network  
Connectionand “Mode Selectwill not be  
reset.  
“Format SD Card”  
(Available only when an SD Memory Card is  
inserted.):  
Initializes the SD Memory Card. After  
confirmation message appears, use [K/L] to  
select “Yes, then press [OK].  
“Erase Saved BD-ROM Data (Player)”:  
Clears the data saved for the BD-ROM  
contents, such as BD-ROM game scores, from  
this player.  
“Erase Saved BD-ROM Data (SD Card)”  
(Available only when an SD Memory Card is  
inserted.):  
Clears the supplemental data for the BD-ROM  
playback, such as subtitle data, from the SD  
Memory Card.  
“Network Settings”:  
Resets the network setting to the default.  
“Netflix Deactivate”:  
Deactivates the connection to Netflix.  
“Vudu Deactivate”:  
Deactivates the connection to VUDU.  
Initialize  
Setup  
Format SD Card  
Erase Saved BD-ROM Data(Player )  
Erase Saved BD-ROM Data(SD Card)  
Network Settings  
Netflix Deactivate  
Vudu Deactivate  
4. Confirmation message will appear. Use [K/L]  
to select “Yes, then press [OK].  
• Press [OK] again to complete the settings.  
5. Press [SETUP] to exit.  
Note  
• Do not remove the SD Memory Card while  
executing the “Format SD Cardor the “Erase  
Saved BD-ROM Data (SD Card). It damages the  
card.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
OTHERS  
Troubleshooting  
If the unit does not perform properly when operated as instructed in this manual, check the unit,  
consulting the following checklist.  
Problem  
No power.  
Solution  
- Check if the AC cord is properly connected.  
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it  
in again.  
No sound or picture.  
- Check if the connected TV is turned on.  
- Check if the connections are made securely and correctly.  
- Check whether the connected TV or other device supports HDCP. (This  
unit will not output a video signal unless the other device supports  
HDCP.)  
- Check whether the output format of this unit (HDMI FORMAT) matches  
the supported input format of other connected device.  
No audio / video signal on the - If the unit is connected to the unauthorized display device with an  
display device via HDMI cable. HDMI cable, the audio / video signal may not be output.  
- Perform an HDMI cable hotplug, wherein you disconnect the HDMI  
cable from the TV and this unit and then reconnect it to both the  
devices while they are powered on.  
- Ensure that your HDMI cable is certified.  
Distorted picture.  
- Sometimes a small amount of picture distortion may appear. This is  
not a malfunction.  
- Connect this unit directly to the TV. If the audio / video cables are  
connected to a VCR, pictures may be distorted due to the copy right  
protection system.  
Completely distorted picture - Make sure the disc is compatible with this unit.  
or black / white picture with  
BD / DVD.  
No sound or distorted sound. - Adjust the volume.  
- Check if speakers are connected correctly.  
- Check the HDMI connections.  
- Check the settings in “Audiomenu.  
Picture freezes momentarily  
during playback.  
- Check the disc for fingerprints / scratches and clean with a soft cloth  
wiping from center to edge.  
- Clean the disc.  
Disc cannot be played back.  
- Clean the disc.  
- Ensure the disc label is facing up.  
- Check if the disc is defective by trying another disc.  
- Cancel the ratings control or change the control level.  
- Insert a correct disc that can be played back on this unit.  
- The format of the card does not match that accepted by this unit or  
the card is not compatible.  
SD Memory Card cannot be  
read.  
No return to start-up screen  
when disc is removed.  
- Reset this unit by turning it off, then on again.  
The unit does not respond to - Aim the remote control directly at infrared sensor window on the front  
the remote control.  
panel.  
- Reduce the distance to infrared sensor window.  
- Replace the batteries in the remote control.  
- Re-insert the batteries with their polarities (+ / - signs) as indicated.  
Buttons do not work or the  
unit stops responding.  
- To completely reset the unit, press and hold [y STANDBY/ON] on the  
front panel for 10 seconds to shut down the unit or unplug the AC  
cord from the AC outlet for 5-10 seconds.  
The unit does not respond to - Operations may not be permitted by the disc. Refer to the instructions  
some operating commands  
during playback.  
of the disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
Problem  
Solution  
The unit cannot read BD /  
- Condensation? (Let sit 1 or 2 hours)  
DVD/ CD.  
- Check if the disc is compatible with this unit.(Refer to page 14.)  
- Wipe the dirt off the disc or replace the disc.  
Angle does not switch.  
- The angle cannot be switched for BD / DVD which do not contain  
multiple angles. In some cases multiple angles are only recorded for  
specific scenes.  
Playback does not start when - Check the settings in “Parentalmenu.  
the title is selected.  
The password for rating level - Enter the default password “4737, then your forgotten password will  
has been forgotten.  
Cannot connect to the  
network.  
be cleared.  
- Check if the LAN cable connection is properly made.  
- Turn on the modem or broadband router.  
- Check the network setting.  
- Check if the broadband router and/or modem is correctly connected.  
- Check the “BD-Live Setting.  
- When connecting directly to a modem via a LAN cable, you might  
need to power cycle the modem to reset settings on the modem.  
Cannot use the wireless  
connection.  
- Once you have activated the wireless connection please wait 30  
seconds for the connection to be established after turning on the  
unit, before trying to access network features such as BD-Live, Netflix,  
Blockbuster or VUDU.  
Cannot connect to the  
network while my PC is  
connected to the network.  
The capacity of the SD card  
decreased.  
- Check the content of your Internet service contract to see if your  
Internet service provider prevents multiple terminals connecting at  
the same time.  
- Data may be written to the SD card when a BD-video that supports the  
virtual package is used and an SD card is in the slot.  
Cannot use the BD-Live  
- Insert an SD card with enough capacity (1GB or more).  
function or download of data - Check if an SD card is correctly inserted.  
does not perform properly.  
- Make sure the write-protect switch on the SD card is not enabled.  
Cannot play back BD-video  
(BD-ROM Profile 2.0).  
- Insert an SD card(1GB or more) which is formatted on this unit.  
- Some discs with BD-Live function require memory when playing back  
the content.  
- Do not remove the card during playback.  
- Make sure the write-protect switch on the SD card is not enabled.  
Cannot use Netflix feature.  
Cannot add movies or TV  
- Netflix is available only in the United States.  
- Check if the network connection is properly made.  
- Visit netflix.com/MAGNAVOX on your PC and become a Netflix  
member.  
- Visit netflix.com on your PC.  
episodes to the instant Queue. - Adding movies or TV episodes on this unit is not available.  
Even though the speed of the - The picture quality does not change during playback.  
Internet connection improves - The picture quality differs depending on the speed of Internet  
during playback, the picture  
quality of Netflix streaming  
movie does not improve.  
The picture quality of  
streaming movie (Netflix,  
Blockbuster or VUDU) is poor.  
Streaming movie (Netflix,  
Blockbuster or VUDU) often  
stops or starts buffering  
during playback.  
connection at the time of loading.  
- Check the speed of your Internet connection. You need speeds of at  
least 8 Mbps to this player for high quality uninterrupted playback.  
- Contact your Internet service provider to troubleshoot your Internet  
connection for speed and line quality. Consistent line quality and  
speed are very important for Internet video playback.  
Cannot use Blockbuster  
feature.  
- Check if the network connection is properly made.  
create an account.  
Cannot use VUDU feature.  
- Check if the network connection is properly made.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
Problem  
Cannot rent or buy movies /  
TV episodes on VUDU.  
Solution  
- You need to activate the VUDU account. (Refer to page 27)  
information.  
Note  
• Some functions are not available in specific modes, but this is not a malfunction. Read the description  
in this manual for details on correct operations.  
• Some functions are prohibited on some discs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
Language Code List  
Language  
A-B  
Code  
Language  
French [FRE]  
Code  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
Language  
Macedonian  
Code  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
Language  
Siswat  
Code  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
65681  
Abkhazian  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Frisian  
Malagasy  
Malay  
Slovak [SLO]  
Slovenian  
Somali  
Afar  
Galician  
Afrikaans  
Albanian  
Amharic  
Arabic  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Malayalam  
Maltese  
Spanish [SPA]  
Sundanese  
Swahili  
Maori  
Marathi  
Armenian  
Assamese  
Aymara  
Moldavian  
Mongolian  
Nauru  
Swedish [SWE]  
Gujarati  
T
Hausa  
Tagalog  
Tajik  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Azerbaijani  
Bashkir  
Hebrew  
Nepali  
Hindi  
Norwegian [NOR]  
O-R  
Tamil  
Basque  
Hungarian [HUN]  
I-K  
Tatar  
Bengali;Bangla  
Bhutani  
Occitan  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
Telugu  
Thai  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Oriya  
Bihari  
Oromo (Afan)  
Panjabi  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
Bislama  
Breton  
Pashto;Pushto  
Persian  
Bulgarian [BUL]  
Burmese  
Byelorussian  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Polish [POL]  
Portuguese[POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
C-E  
Cambodian  
Catalan  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
U-Z  
Ukrainian  
Urdu  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Chinese [CHI]  
Corsican  
Uzbek  
Croatian  
Kinyarwanda  
Kirghiz  
Samoan  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
Vietnamese  
Volapuk  
Welsh  
Czech [CZE]  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
Sangho  
Kirundi  
Sanskrit  
Korean [KOR]  
Kurdish  
Scots Gaelic  
Serbian  
Wolof  
Xhosa  
L-N  
Serbo-Croatian  
Sesotho  
Yiddish  
Yoruba  
Zulu  
Laothian  
Latin  
5861  
5847  
5868  
5860  
5866  
F-H  
Setswana  
Shona  
Faroese  
5261  
5256  
5255  
Latvian;Lettish  
Lingala  
Fiji  
Sindhi  
Finnish [FIN]  
Lithuanian  
Singhalese  
Note  
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be  
displayed every time you change the audio setting on page 24 or subtitle language setting on page 23. If  
you choose any other languages, “---will be displayed instead.  
Servicing  
• Please refer to relevant topics on “Troubleshootingon page 45 before returning the product.  
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-  
serviceable parts inside. Turn the unit to the standby mode, unplug the power plug, and please  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
Specifications  
General  
Signal system  
NTSC color  
Power requirements  
Power consumption  
Dimensions (width x height x depth)  
Weight  
120 V AC, 60 Hz  
16 W (standby: 0.5 W)  
14.2 x 2.0 x 8.5 inches (360 x 50 x 215mm)  
4.04 lbs. (1.83 kg)  
Operating temperature  
Operating humidity  
41°F (5°C) to 104°F (40°C)  
Less than 80 % (no condensation)  
Terminals (Rear)  
Video output (RCA jack x 1)  
HDMI output (HDMI jack x 1)  
Audio output (Analog) (RCA jack x 2)  
Audio output (Digital) (RCA jack x 1)  
LAN terminal  
1 Vp-p (75Ω)  
Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio  
L/R: 2 Vrms (output impedance: more than 1kΩ)  
500 mVp-p (75Ω)  
10BASE-T/100BASE-TX  
Wireless LAN  
IEEE 802.11 b/g/n  
Note  
• The specifications and design of this product are subject to change without notice.  
NETWORK SERVICE DISCLAIMER  
Network Service Disclaimer  
Content and services made available through this product are transmitted by third parties by means of  
networks and transmission facilities over which Company has no control and third party services may  
be terminated or interrupted at any time, and Company makes no representation or warranty that any  
content or service will remain available for any period of time. Without limiting the generality of this  
disclaimer, Company expressly disclaims any responsibility for any interruption or suspension of any  
content or service made available through this product. Company is not responsible for customer service  
related to the content and services. Any question or request for service relating to the content or services  
should be made directly to the respective content and service providers.  
THIRD PARTY CONTENT AND SERVICES MADE AVAILABLE THROUGH THIS PRODUCT ARE PROVIDED  
“AS IS.COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, FOR ANY PURPOSE  
WHATSOEVER. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED INCLUDING  
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,  
ACCURACY, VALIDITY, TIMELINESS, LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR SERVICE  
MADE AVAILABLE THROUGH THIS PRODUCT.  
IN NO EVENT SHALL COMPANY BE LIABLE FOR, ANY DAMAGES, WHETHER ARISING IN CONTRACT  
OR TORT, INCLUDING WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR  
CONSEQUENTIAL DAMAGES, LOST PROFITS, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES  
ARISING OUT OF, OR IN CONNECTION WITH, ANY CONTENT (OR ANY INFORMATION CONTAINED  
THEREIN) OR SERVICE PROVIDED TO THE USER OR ANY THIRD PARTY, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
All content and services accessible through this product belong to third parties and are protected by  
copyright, patent, trademark and/or other intellectual property rights. Such content and services are  
provided solely for the User’s personal noncommercial use. User may not use any content or services in  
a manner that has not been authorized by the content owner or service provider. Without limiting the  
foregoing, unless expressly authorized by the applicable content owner or service provider, you may  
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or  
distribute in any manner or medium any content or services made available through this product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
Códigos de Región  
ESPAÑOL  
Esta unidad se ha diseñado para reproducir BD-  
vídeo con región “Ay DVD-vídeo con región “1o  
“ALL. No podrá reproducir BD-vídeo o DVD-vídeo  
que estén tituladas para otras regiones. Busque  
los símboloes de su BD-vídeo o DVD-vídeo.  
Si estos símbolos de regiones no aparecen en su  
BD-vídeo o DVD-vídeo, no puede reproducir el  
disco en esta unidad. El número o letra dentro del  
globo se refiere a la región del mundo. Un BD-  
vídeo o DVD-vídeo etiquetado para una región  
específica solamente puede reproducirse en  
unidades que tengan el mismo código de región.  
Discos Reproducibles  
Este aparato es compatible con la reproducción  
de los siguientes discos y archivos.  
Discos y Archivos Reproducibles  
Discos reproducibles  
Discos Blu-ray  
- BD-vídeo (capa simple / doble)  
- BD-RE ver. 2.1 (capa simple / doble)  
(Grabado en formato BDMV)  
- BD-R ver. 1.1 / 1.2 / 1.3 (capa simple / doble)  
(Grabado en formato BDMV) (Los discos no  
cerrados pueden no reproducirse.)  
Encontrar el Canal de Vídeo en su Televisor  
Una vez finalizadas todas las conexiones, debe  
localizar el canal de vídeo correspondiente en su  
televisor (canal de entrada externa).  
1. Una vez que haya realizado todas las  
conexiones correspondientes, pulse  
[STANDBY/ON y ] para encender la unidad.  
2. Encienda su televisor.  
3. Pulse el botón del mando a distancia  
del televisor que da acceso al canal de  
entrada externa. Puede tener el nombre  
de “SOURCE, AV” o “SELECT” (consulte el  
manual del usuario de su televisor).  
DVD-vídeo  
DVD-RW  
DVD-R  
CD-DA (CD de sonido)  
CD-RW  
CD-R  
KODAK Picture CD  
DTS-CD  
Archivos reproducibles  
AVCHD  
Soportes  
DVD-RW/-R  
Tarjeta de  
memoria SD  
(incluido SDHC),  
Tarjeta miniSD,  
Tarjeta microSD  
Watch HD movies  
Windows Media TM Audio  
JPEG  
BD-RW/-R  
DVD-RW/-R  
CD-RW/-R  
Tarjeta de  
memoria SD  
(incluido SDHC),  
Tarjeta miniSD,  
Tarjeta microSD  
Ajusta el idioma para el menú del  
reproductor  
1. En modo detención, pulse [SETUP].  
2. Utilice [K/L] para seleccionar y después  
pulse [OK].  
3. Utilice [K/L] para seleccionar “Player Menu”  
y después pulse [OK].  
Tarjetas legibles  
Archivos / datos  
reproducibles  
AVCHD, Windows  
MediaTM Audio,  
JPEG, comentario  
en imágenes,  
subtítulos u otros  
extras del BD-  
ROM ver.2(profile  
2.0 / profile 1.1)  
Tarjeta de memoria SD  
(8 MB - 2 GB)  
Tarjeta de memoria SDHC  
(4 GB - 8 GB)  
Tarjeta miniSD (8 MB - 2 GB)  
Tarjeta microSD (8 MB - 2 GB)  
Quick  
Mode Select  
Disc  
HDMI Audio Out  
HDMI Multi(Normal)  
HDMI Video Resolution Auto  
Player Menu  
Network Selection  
English  
Wired  
4. Utilice [K/L] para seleccionar su idioma  
deseado, y luego presione [OK].  
5. Pulse [SETUP] para salir.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
Reproducción Directa  
1. Presione [OPEN/CLOSE A] para abrir la  
bandeja de discos e insertar su disco con  
el rótulo apuntando hacia arriba. Presione  
de nuevo [OPEN/CLOSE A] para cerrar la  
bandeja de discos.  
• Asegúrese de que el disco sea compatible  
con este aparato.  
2. Es posible que la reproducción comience  
automáticamente.  
• De lo contrario, pulse [B(reproducir)].  
Para pausar la reproducción:  
Pulse [F(pausar)].  
Para retomar la reproducción normal:  
Pulse [B(reproducir)].  
Para detener la reproducción:  
Pulse [C(detener)].  
Reproducción se encuentra en el modo  
Reanudar-Detención.  
3. Para detener momentáneamente la  
reproducción presione [STOP C] una vez.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or  
workmanship as follows:  
DURATION:  
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from  
the date of original retail purchase. Certain parts are excluded from this warranty.  
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the  
date of original retail purchase.  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR  
OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO  
OBTAIN SERVICE UNDER THIS WARRANTY.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced,  
defaced, missing or if service was attempted by an unauthorized service center. This limited warranty  
does not apply to any product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occur during  
normal use. It does not cover damage which occurs in shipment, or failures which are caused by  
repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident,  
misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance,  
commercial use such as hotel, rental or office use of this product, or damage which results from fire,  
flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE  
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE  
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER  
WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL  
OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED  
STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE  
CENTER.  
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.  
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF  
NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS  
WILL BE CHARGED.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT  
VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO  
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT  
PRIOR NOTICE.  
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:  
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either  
its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED  
SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service  
providers without prior written approval.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please  
contact us at:  
FUNAI SERVICE CORPORATION  
Tel: 1-800-605-8610  
2200 Spiegel Drive Groveport, OH 43125  
E5S20UD 1VMN29953B ★★  
Printed in China  
*
V
M
N
2
9
9
5
3
B
*
Download from Www.Somanuals.com. All Manuals Search And Downlo1ad.  

EarthStone Oven 110 Modular User Manual
Electro Voice Stereo Amplifier AP2200 User Manual
Everex Laptop Stepnote NC User Manual
Extron electronic Stereo Amplifier PA 250 User Manual
Fagor America Electric Pressure Cooker uCOOK PRESSURE COOKER SET User Manual
Fiesta Gas Grill EZT40050 B416 User Manual
Frigidaire Microwave Oven FGMV175QF User Manual
GE Beverage Dispenser Wine Chiller User Manual
Genelec Portable Speaker 1031A User Manual
Genesis Advanced Technologies Speaker System Monitor 2 User Manual