Operation manual
for model VR2300
Record All Information
for future reference:
Purchase Date:
Model #:
Serial #:
Questions? 1-800-888-2468
Learn more about your pressure
washer and register on line at
www.VR2300.com
Pressure Washer
IMPORTANT
Please make certain that the person who is to use this equipment
carefully reads and understands these instructions before operating.
Part No. D27935 Rev. 1 4/30/03
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read Operation Manual. Do not operate equipment until you
have read Operation Manual for Safety, Assembly, Operation,
and Maintenance Instructions.
READ AND SAVE THESE INSTRUCTIONS
HAZARD
RISK OF EXPLOSION OR FIRE
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Spilled gasoline and it’s vapors can be-
come ignited from cigarette sparks,
electrical arcing, exhaust gases, and hot
engine components such as the muffler.
• Shut off engine and allow it to cool before
adding fuel to the tank.
• Use care in filling tank to avoid spilling fuel.
Move pressure washer away from fueling area
before starting engine.
• Heat will expand fuel in the tank which
could result in spillage and possible fire
explosion.
• Keep maximum fuel level ½” below top of
tank to allow for expansion.
• Operating the pressure washer in an ex-
plosive environment could result in a fire.
• Operate and fuel equipment in well ventilated
areas free from obstructions. Equip areas with
fire extinguisher suitable for gasoline fires.
• Materials placed against or near the pres-
sure washer can interfere with its proper
ventilation features causing overheating
and possible ignition of the materials.
• Never operate pressure washer in an area
containing dry brush or weeds.
• Muffler exhaust heat can damage painted
surfaces, melt any material sensitive to
heat (such as siding, plastic, rubber, or
vinyl), and damage live plants.
• Always keep pressure washer a minimum of
four feet away from surfaces (such as houses,
automobiles, or live plants) that could be dam-
aged from muffler exhaust heat.
• Improperly stored fuel could lead to acci-
dental ignition. Fuel improperly secured
could get into the hands of children or
other unqualified persons.
• Store fuel in an OSHA approved container,
in a secure location away from work area.
• Use of acids, toxic or corrosive chemicals,
poisons, insecticides, or any kind of flam-
mable solvent with this product could re-
sult in serious injury or death.
• Do not spray flammable liquids.
HAZARD
RISK TO BREATHING
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Operate pressure washer in a well ventilated
area. Avoid enclosed areas such as garages,
basements, etc.
• Breathing exhaust fumes will cause serious
injury or death!
• Never operate unit in a location occupied by
humans or animals.
• Some cleaning fluids contain substances
which could cause injury to skin, eyes, or
lungs.
• Use only cleaning fluids specifically recom-
mended for high pressure washers. Follow
manufacturers recommendations. Do not
use chlorine bleach or any other corrosive
compound.
3- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
HAZARD
RISK OF INJURY OR PROPERTY DAMAGE
WHEN TRANSPORTING OR STORING
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Fuel or oil can leak or spill and could
result in fire or breathing hazard, serious
injury or death can result. Fuel or oil leaks
will damage carpet, paint or other
surfaces in vehicles or trailers.
• If pressure washer is equipped with a fuel
shut-off valve, turn the valve to the off
position before transporting to avoid fuel
leaks. If pressure washer is not equipped
with a fuel shut-off valve, drain the fuel from
tank before transporting. Only transport fuel
in an OSHA approved container. Always
place pressure washer on a protective mat
when transporting to protect against dam-
age to vehicle from leaks. Remove pressure
washer from vehicle immediately upon arrival
at your destination.
HAZARD
RISK OF FLUID
INJECTION
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Your washer operates at fluid pressures
and velocities high enough to penetrate
human and animal flesh, which could
result in amputation or other serious injury.
Leaks caused by loose fittings or worn or
damaged hoses can result in injection
injuries. DO NOT TREAT FLUID
• Never place hands in front of nozzle.
• Direct spray away from self and others.
• Make sure hose and fittings are tightened
and in good condition. Never hold onto the
hose or fittings during operation.
• Do not allow hose to contact muffler.
• Never attach or remove wand or hose
fittings while system is pressurized.
INJECTION AS A SIMPLE CUT! See a
physician immediately!
• Injuries can result if system pressure is not
reduced before attempting maintenance or
disassembly.
• To relieve system pressure, shut off engine,
turn off water supply, and pull gun trigger
until water stops flowing.
• Use only hoses and accessories rated for
pressure higher than your pressure
washer's p.s.i.
HAZARD
RISK OF CHEMICAL BURN
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Use of acids, toxic or corrosive chemicals,
poisons, insecticides, or any kind of flam-
mable solvent with this product could re-
sult in serious injury or death.
• Do not use acids, gasoline, kerosene, or
any other flammable materials in this
product. Use only household detergents,
cleaners and degreasers recommended for
use in pressure washers.
• Wear protective clothing to protect eyes
and skin from contact with sprayed
materials.
4- ENG
Download from Www.Somanuals.com. All Manuals Search And Download.
D27935
HAZARD
RISK OF UNSAFE OPERATION
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Unsafe operation of your pressure washer
could lead to serious injury or death to
you or others.
• Do not use chlorine bleach or any other
corrosive compound.
• Become familiar with the operation and con-
trols of the pressure washer.
• Keep operating area clear of all persons,
pets, and obstacles.
• Do not operate the product when fatigued
or under the influence of alcohol or drugs.
Stay alert at all times.
• Never defeat the safety features of this
product.
• Do not operate machine with missing,
broken, or unauthorized parts.
• Never leave wand unattended while unit is
running.
• If proper starting procedure is not
followed, engine can kickback causing
serious hand and arm injury.
• If engine does not start after two pulls,
squeeze trigger of gun to relieve pump
pressure. Pull starter cord slowly until
resistance is felt. Then pull cord rapidly to
avoid kickback and prevent hand or arm
injury.
• Keep children away from the pressure
washer at all times.
• The spray gun/wand is a powerful clean-
ing tool that could look like a toy to a
child.
• Reactive force of spray will cause
gun/wand to move, and could cause the
operator to slip or fall, or misdirect the
spray. Improper control of gun/wand can
result in injuries to self and others.
• Do not overreach or stand on an unstable
support. Grip gun/wand firmly with both
hands. Expect the gun to kick when trig-
gered.
HAZARD
RISK OF ELECTRICAL SHOCK
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Spray directed at electrical outlets or
switches, or objects connected to an
electrical circuit, could result in a fatal
electrical shock.
• Unplug any electrically operated product
before attempting to clean it. Direct spray
away from electric outlets and switches.
HAZARD
RISK OF HOT SURFACES
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Contact with hot surfaces, such as
engines exhaust components, could
result in serious burn.
• During operation, touch only the control
surfaces of the pressure washer. Keep
children away from the pressure washer at all
times. They may not be able to recognize the
hazards of this product.
5- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
HAZARD
RISK OF INJURY FROM SPRAY
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Always wear ANSI approved Z87 safety
glasses.Wear protective clothing to protect
against accidental spraying.
• Never point wand at, or spray people or
animals.
• Always secure trigger lock when wand is not
in service to prevent accidental operation.
• Never permanently secure trigger in pull
back (open) position.
• High velocity fluid spray can cause
objects to break, propelling particles at
high speed.
• Light or unsecured objects can become
hazardous projectiles.
The powerful spray from your pressure washer is capable of causing
damage to surfaces such as wood, glass, automobile paint, auto
stripping and trim, and delicate objects such as flowers and shrubs. Before spraying,
check the item to be cleaned to assure yourself that it is strong enough to resist damage
from the force of the spray. Avoid the use of the concentrated spray stream except for
very strong surfaces like concrete and steel.
Operating without flow of water will result in equipment damage. Operating the pressure
washer with water supply shutoff will void your warranty. You should never run this pres-
sure washer for more than 2 minutes without pulling the trigger to allow cool water to
enter the pump and the heated (recirculated) water to exit.
CONSUMER GENERAL AND SERVICE INFORMATION
DO NOT RETURN THIS PRODUCT TO THE RETAILER!
FOR SERVICE OPTIONS CALL: 1-800-888-2468
• Congratulations! You have purchased a high quality product from America’s leading
manufacturer of pressure washers. This pressure washer, when properly used and
maintained, will provide trouble-free service. Please read and follow these instructions for
proper use and maintenance.
• Please take the time now to register your pressure washer online at
• All sales of pressure washers are final. Do not return this product to the retailer.
• If you experience any problems and need assistance, please call us at our toll-free
number 1-800-888-2468, Monday through Saturday, 8:00 a.m. To 6:00 p.m. Central Time.
• If repair or service part purchase is required, our many Authorized Warranty Service
Centers are conveniently located and equipped to handle all in-warranty and out-of-
warranty service.
• For the location of the nearest Authorized Warranty Service Center call 1-800-888-2468,
• All pressure washers carry a manufacturer's one year warranty from date of purchase for
consumer use and a 90 day warranty for commercial use.
• Retain sales receipt as proof of purchase for warranty service.
• Read and understand all safety warnings.
• Do not operate this unit until you have read and understand this Operation Manual for
Safety, Operation, and Maintenance Instructions.
• Do not operate this unit until you have read and understand the Engine Owners Manual
for Safety, Operation, and Maintenance Instructions.
6- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
CARTON CONTENTS
Accessories Panel
English/
Spanish
Operation
Manual
Engine
Manual
Bagged Accessories Panel
Handle
Engine Frame and
Wheel Assembly
Knobs
Saddle Bolts
Chemical
Hose
Nozzle Cleaning
Kit
High Pressure
Hose
Bagged Parts
Multi-Adjustable Spray Wand
Spray Gun
Engine Oil
7- ENG
Download from Www.Somanuals.com. All Manuals Search And Download.
D27935
ASSEMBLY INSTRUCTIONS
1. Place handle assembly onto frame and connect handle to frame. NOTE:
Knobs are assembled to inside of frame.
2. Connect wand to gun. Tighten securely.
3. Attach high pressure hose to gun. Tighten securely.
4. To Assemble Accessories Panel
a. Remove top screws on handle assembly.
b. Loosen bottom screws on handle assembly.
Remove
Loosen
8- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Place grooves in accessories panel assembly onto screws and slide
panel assembly into place.
Screws
d. Place screws (removed earlier) into the top holes and secure accessories
panel assembly to handles. Do not overtighten.
5. Add engine oil (supplied) to engine. Refer to Engine Owners Manual
supplied by engine manufacturer for correct procedure.
NOTE: There will be a slight amount of oil in the engine from factory testing.
9- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
READ THIS OPERATION MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with
the location of various controls and adjustments. Save this manual for future
reference.
Chemical
Hose
Spray
Gun
High
Pressure
Hose
Engine
Multi-
Adjustable
Spray Wand
High
Pressure
Pump
BASIC ELEMENTS OF A PRESSURE WASHER
High Pressure Pump (located inside the shroud): Increases the pressure of the
water supply.
Engine: Drives the high pressure pump.
High Pressure Hose: Carries the pressurized water from the pump to the gun
and wand.
Spray Gun: Connects with wand to control water flow rate, direction, and
pressure.
Multi-Adjustable Spray Wand: Has a spray nozzle which adjusts from a pencil
stream (0°) to a wide angle fan spray (40°). The spray can be adjusted by twisting
the nozzle clockwise and/or counterclockwise. Also, the high and low pressure
settings can be controlled by moving the nozzle in and out. See Operation
section. See How To Use Wand paragraph in this section.
Chemical Hose: Feeds cleaning agents into the pump to mix with the
pressurized water. See How To Apply Chemicals/Cleaning Solvents in Operation
section of this manual.
10- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC ELEMENTS OF ENGINE
Refer to the engine manual for location and operation of engine controls.
Choke Control: Opens and closes carburetor choke valve
Throttle Control Lever: Controls engine speed.
Starter Grip: Pulling starter grip operates recoil starter to crank engine.
PRESSURE WASHER TERMINOLOGY
PSI: Pounds per Square Inch. The unit of measure for water pressure. Also used
for air pressure, hydraulic pressure, etc.
GPM: Gallons Per Minute. The unit of measure for the flow rate of water through
the pressure washer.
CU: Cleaning Units. GPM multiplied by PSI.
Bypass Mode: In Bypass Mode, the pump is recirculating water because the
trigger of the spray gun is not pulled. If unit is left in bypass mode for more than
two (2) minutes, the water temperature will rise to a dangerous level and could
damage internal components of the pump. Any damage to pump due to these
causes will not be covered under warranty.
DO NOT allow your unit to operate in bypass mode for more
than two minutes at any time. Overheating of pump can
cause damage to pump.
Thermal Relief Valve: In an effort to prevent extreme damage, pumps are
equipped with a thermal relief valve. This valve will open when the temperature
inside the pump rises too high. This valve will then release a gush of water in an
effort to lower the temperature inside the pump. Immediately after this occurs,
the valve will close. The thermal relief valve is part of the pump and is not visible
to the user.
Chemical Injection System: Mixes cleaners or cleaning solvents with the
pressurized water to improve cleaning effectiveness.
Water Supply: All pressure washers must have a source of water. The minimum
requirements for a water supply are 20 PSI and 5 gallons per minute.
PRESSURE WASHER OPERATING FEATURES
PRESSURE ADJUSTMENTS
The pressure setting is preset at the factory to achieve optimum pressure and
cleaning. If you need to lower the pressure, it can be accomplished by these
methods.
1. Back away from the surface to be cleaned. The further away you are, the
less the pressure will be on the surface to be cleaned.
2. Rotate the nozzle at the end of the multi-adjustable spray wand to
widen the fan spray. The wider fan spray will minimize the pressure on the
surface to be cleaned.
DO NOT attempt to increase pump pressure. A higher
pressure setting than the factory set pressure may
damage pump.
11- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE WAND:
Your pressure washer is equipped with a multi-adjustable spray wand with both
high and low pressure settings. The high pressure setting is for cleaning and
rinsing, the low pressure setting is for applying chemicals or cleaning solutions to
surfaces.
When using the high pressure setting, DO NOT allow the jet-
like spray to come in contact with unprotected skin, eyes, or
with any pets or animals. Serious injury can occur.
Risk of injection or injury to person. DO NOT direct
discharge stream toward persons.
For high pressure operation, pull back the nozzle of the multi-adjustable spray
wand as shown.
The nozzle at the end of the multi-adjustable spray wand can be rotated to
change the high pressure spray pattern from a narrow jet to a 40º fan shape, as
shown. Markings have been placed on the nozzle to help you select the spray
pattern.
40º fan spray
narrow jet stream
For low pressure operation, extend the nozzle of the multi-adjustable spray wand
as shown.
12- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO APPLY CHEMICALS AND CLEANING SOLVENTS
Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use
only soaps and chemicals designed for pressure washer use. Do not use bleach.
To apply chemicals:
1. Press chemical hose onto barbed fitting located near
high pressure hose connection of pump as shown.
2. Place other end of chemical hose with filter on it into
container holding chemical/cleaning solution. NOTE:
The chemical/water ratio is 7:1, for every 7 gallons of
water pumped, 1 gallon of chemical/cleaning solution
will be used.
3. Set multi-adjustable nozzle to low pressure setting.
Barbed Fitting
See How To Use Wand paragraph in this section.
4. After use of chemicals, place chemical hose into container of clean water and
draw clean water through chemical injection system to rinse system thoroughly.
If chemicals remain in the pump it could be damaged. Pumps damaged due to
chemicals will not be covered under warranty.
NOTE: Chemicals and soapS will not siphon when wand is in the high pressure
setting.
READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT
When using the high pressure setting, DO NOT allow the
high pressure spray to come in contact with unprotected skin,
eyes, or with any pets or animals. Serious injury can occur.
Your washer operates at fluid pressures and velocities high enough to penetrate
human and animal flesh, which could result in amputation or other serious injury.
Leaks caused by loose fittings or worn or damaged hoses can result in injection
injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a
physician immediately!
NEVER fill fuel tank when engine is running or hot. Do not
smoke when filling fuel tank.
NEVER fill fuel tank completely. Fill tank to 1/2" below bottom of filler neck to
provide space for fuel expansion. Wipe any fuel spillage from engine and
equipment before starting engine.
NEVER run engine indoors or in enclosed, poorly ventilated areas. Engine
exhaust contains carbon monoxide, an odorless and deadly gas.
DO NOT let hoses come in contact with very hot engine muffler during or
immediately after use of your pressure washer. Damage to hoses from contact
with hot engine surfaces will NOT be covered by warranty.
NEVER pull water supply hose to move pressure washer. This
could damage hose and/or pump inlet.
DO NOT use hot water, use cold water only.
NEVER turn water supply off while pressure washer engine is running or
damage to pump will result.
DO NOT stop spraying water for more than two minutes at a time. Pump
operates in bypass mode when spray gun trigger is not pressed. If pump is left
in bypass mode for more than two minutes internal components of the pump
can be damaged.
If you do not understand these precautions, please call 1-800-888-2468 to
speak to a service representative for further instructions.
13- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
STARTING
Prior to starting, refer to your engine manual for proper starting procedures
for your engine type.
1. In a well ventilated outdoor area add fresh high quality unleaded gasoline
with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled
fuel before starting the engine. Refer to engine manual for correct procedure.
2. Check engine oil level. See Engine Owners Manual for correct procedure.
NOTE: There will be a slight amount of oil in the engine from factory
testing.
3. Verify the filter screen is in water inlet of pump.
NOTE: Cone side faces out.
Filter Screen
4. Connect water source to pump inlet.
NOTE: Water source must provide a minimum of 5
gallons per minute at 20 p.s.i.
5. Connect high pressure hose to pump outlet.
6. If applying a chemical or cleaning solution, see
How To Apply Chemicals/Cleaning Solvents in
Operation section of this manual.
Water
Source
7. Turn water source on.
8. Start engine. See Engine Owners Manual for
correct procedure. NOTE: If the engine does not
start after two pulls, pull the trigger to relieve the
pressure.
High
Pressure
Hose
9. Depress trigger on gun to start water flow.
NOTE: Stand on a stable surface and grip
gun/wand firmly with both hands. Expect the gun
to kickback when triggered.
Hook-up
10. Release trigger to stop water flow.
11. Adjust nozzle spray for the task being performed or change quick connect
tip. See How To Use Wand instructions in this section.
SHUTTING DOWN
1. After each use, if you have applied chemicals, place chemical hose into
container of clean water and draw clean water through chemical injection system
to rinse system thoroughly. NOTE: Failure to do so could cause damage to the
pump.
2. Turn engine off. See Engine Owner’s Manual. NOTE: NEVER turn the water
off with the engine running.
3. Turn water source off.
4. Pull trigger on spray gun to relieve any water pressure in hose or spray gun.
5. See Storage section in this manual for proper storage procedures.
14- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
When performing maintenance, you may be exposed to hot
surfaces, water pressure, moving parts, or fire that can cause
serious injury or death!
Before performing any maintenance or repair, disconnect spark plug wire, let
engine cool and release all water pressure. The engine contains flammable
fuel. DO NOT smoke or work near open flames while performing
maintenance.
To ensure efficient operation and longer life of your pressure washer, a routine
maintenance schedule should be prepared and followed. If the pressure washer is
used in unusual conditions, such as high-temperatures or dusty conditions, more
frequent maintenance checks will be required.
ENGINE
Consult the Engine Owners Manual for the manufacturer's recommendations for
any and all maintenance.
NOZZLE CLEANING
If the nozzle becomes clogged with foreign matter, such as dirt, excessive
pressure may develop. If the nozzle becomes partially clogged or restricted, the
pump pressure will pulsate. Clean the nozzle immediately using the nozzle kit
supplied and the following instructions:
1. Shut off the pressure washer and turn off the water supply.
2. Disconnect spark plug wire to insure the unit will not start while performing
maintenance.
3. Pull trigger on gun handle to relieve any water pressure.
4. Disconnect the wand from the gun.
5. Remove the nozzle from the end of the wand with the 2mm allen wrench
provided as shown.
6. Clean the nozzle using the nozzle cleaner provided or a straightened paper
clip. Insert into the nozzle end and work back and forth until obstruction is re-
moved.
7. Direct water supply into nozzle end to backflush loosened particles for 30
seconds.
8. Reconnect spark plug wire
9. Reassemble the nozzle to the wand. Tighten securely to prevent leaks.
10. Reconnect wand to gun and turn on water supply.
11. Start pressure washer and place wand into high pressure setting to test.
15- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CLEAN THE WATER INLET FILTER
This screen filter should be checked periodically and cleaned if necessary.
1. Remove filter by grasping end and removing it from
Filter Screen
water inlet of pump as shown.
2. Clean filter by flushing it with water on both sides.
3. Re-insert filter into water inlet of pump.
NOTE: Do not operate pressure washer without filter
properly installed.
16- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
ENGINE
Consult the Engine Owners Manual for the manufacturer's recommendations for
storage.
PUMP
It is recommended that you follow these steps to protect the internal seals of the
pressure washer when STORING THE UNIT FOR MORE THAN 30 DAYS AND/OR
WHEN FREEZING TEMPERATURES ARE EXPECTED.
The manufacturer recommends using EXA80 Pump Saver/Winterizer. EXA80
Pump Saver/Winterizer may be purchased in stores where Excell pressure
washers are sold. If EXA80 is not available, *RV antifreeze needs to be run
through the pump as outlined in the steps below.
1. Obtain a funnel, six ounces of *RV antifreeze, and approximately 36 inches
of garden hose with a male hose connector attached to one end.
Use only RV antifreeze. Any other antifreeze is corrosive
and can damage pump.
2. Disconnect spark plug wire.
3. Disconnect high pressure hose from pump and from spray gun.
4. Connect 36 inch length of hose to water inlet of pump.
5. Add *RV antifreeze to hose as shown.
6. Pull engine starter rope slowly
several times until antifreeze comes
out of high pressure hose connection
of pump.
7. Remove short hose from water inlet of
pump.
8. Reconnect spark plug wire.
9. Drain all water from high pressure
hose, coil it, and store it in cradle of
the pressure washer handle.
10. Drain all water from spray gun and wand by holding spray gun in a vertical
position with nozzle end pointing down and squeezing trigger. Store in
gun/hose holder.
11. Store chemical hose, high pressure hose, spray gun, and wand so they are
protected from damage, such as being run over.
*Windshield washer fluid may also be used.
17- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
CAUSE
CORRECTION
PROBLEM
Add Fuel.
No fuel.
Engine will not
start (see Engine
Manual for
further engine
troubleshooting)
Pressure builds up after two pulls
on the recoil starter or after initial
use.
Squeeze gun trigger to relieve
pressure.
Move choke to the “Choke”
position.
Choke lever in the “No Choke”
position.
Spark plug wire not attached.
Attach spark plug wire.
Choke lever in the “Choke”
position on a “hot” engine or an
engine that has been exposed to
thermal heat for a long period of
time.
Move choke to the “No Choke”
position.
No or low
pressure
(initial use)
Wand not in high pressure.
See How to Use Wand paragraph
in the Operation Section.
Water supply must be at least 5
GPM @ 20 PSI.
Low water supply.
Leak at high pressure hose.
Nozzle obstructed.
Repair leak. Apply sealant tape
if necessary.
Clean nozzle with paper clip or
nozzle cleaning tool, pour water
into nozzle end to flush out
obstruction.
Water filter screen clogged.
Defective E-Z start valve.
Remove and clean filter.
Check with Authorized Warranty
Service Center (AWSC.)
Air in hose.
Turn off the engine, then the
water source. Disconnect the
water source from the pump inlet
and turn the water source on to
remove all air from the hose.
When there is a steady stream of
water present, turn water source
off. Re-connect water source to
pump inlet and turn on water
source. Squeeze trigger to
remove remaining air
Choke lever in the “Choke” position.
Move choke to the “No Choke”
position.
Throttle control lever is not in the
“Fast” position.
Move throttle control lever to the
“Fast” position.
High pressure hose is too long.
Use high pressure hose under
100 feet.
18- ENG
Download from Www.Somanuals.com. All Manuals Search And Download.
D27935
CAUSE
CORRECTION
PROBLEM
See How to Use Wand paragraph
in the Operation Section.
Clean filter.
Wand not in low pressure.
Will not draw
chemicals
Chemical filter clogged.
Insure end of chemical hose is
fully submerged into chemical.
Chemical screen not in chemical
Dilute chemical. Chemical should
be the same consistency as
water.
Chemical too thick.
Lengthen water supply hose
instead of pressure hose.
Pressure hose is too long
Chemical build up in chemical
injector.
Have parts cleaned or replaced
by AWSC.
Worn seal or packing
Have replaced by AWSC.
Have replaced by AWSC.
Have replaced by AWSC.
No or low
pressure (after
period of
Worn or obstructed valves.
Worn unloader piston.
normal use)
Worn E-Z start valve.
Worn or broken o-ring.
Have replaced by AWSC.
Check and replace.
Water leaking
at gun/wand
connection
Loose hose connection.
Tighten.
Water leaking
at pump
Tighten.
Loose connections.
Piston packings worn.
Have replaced by AWSC.
Worn or broken o-rings.
Have replaced by AWSC.
Have replaced by AWSC.
Pump head or tubes damaged
from freezing.
Nozzle obstructed.
Pump Pulsates
Clean nozzle with paper clip or
nozzle cleaning tool, pour water
into nozzle end to flush out ob-
struction.
19- ENG
Download from Www.Somanuals.com. All Manuals Search And Download.
D27935
WARRANTY
DeVilbiss Air Power Company warrants to the original purchaser who uses the product in a consumer
application (personal, residential or household usage) that all products covered under this warranty are
free from defects in material and workmanship for one year from the date of purchase. All products
covered by this limited warranty which are used in commercial applications (i.e., income producing) are
warranted to be free of defects in material and workmanship for 90 days from the date of original
purchase. Products covered under this warranty include air compressors, air tools, service parts,
pressure washers, and generators.
DeVilbiss Air Power Company will repair or replace, at DeVilbiss' option, products or components which
have failed within the warranty period. Service will be scheduled according to the normal work flow and
business hours at the service center location, and the availability of replacement parts. All decisions of
DeVilbiss Air Power Company with regard to this limited warranty shall be final.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
RESPONSIBILITY OF ORIGINAL PURCHASER (initial User):
•
To process a warranty claim on this product, DO NOT return it to the retailer. The product must be
evaluated by an Authorized Warranty Service Center. For the location of the nearest Authorized
Warranty Service Center call 1-800-888-2468, 24 hours a day, 7 days a week or visit our web site at
•
•
Retain original cash register sales receipt as proof of purchase for warranty work.
Use reasonable care in the operation and maintenance of the product as described in the Operation
Manual(s).
•
•
Deliver or ship the product to the nearest Authorized Warranty Service Center. Freight costs, if any,
must be paid by the purchaser.
Air compressors with 60 and 80 gallon tanks will be inspected at the site of installation. Contact the
nearest Authorized Warranty Service Center that provides on-site service calls for service call
arrangements.
•
If the purchaser does not receive satisfactory results from the Authorized Warranty Service Center, the
purchaser should contact DeVilbiss Air Power Company.
THIS WARRANTY DOES NOT COVER:
•
•
Merchandise sold as reconditioned, used as rental equipment, or floor or display models.
Merchandise that has become damaged or inoperative because of ordinary wear, misuse*, cold, heat,
rain, excessive humidity, freeze damage, use of improper chemicals, negligence, accident, failure to
operate the product in accordance with the instructions provided in the Operation Manual(s) supplied
with the product, improper maintenance, the use of accessories or attachments not recommended
by DeVilbiss Air Power Company, or unauthorized repair or alterations.
*
An air compressor that pumps air more than 50% during a one hour period is considered misuse
because the air compressor is undersized for the required air demand.
•
•
•
Repair and transportation costs of merchandise determined not to be defective.
Costs associated with assembly, required oil, adjustments or other installation and start-up costs.
Expendable parts or accessories supplied with the product which are expected to become inoperative
or unusable after a reasonable period of use, including but not limited to sanding disks or pads, saw
and shear blades, grinding stones, springs, chisels, nozzles, o-rings, air jets, washers and similar
accessories.
•
•
Merchandise sold by DeVilbiss Air Power Company which has been manufactured by and identified
as the product of another company, such as gasoline engines. The product manufacturer's warranty, if
any, will apply.
ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY
RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF THE PRODUCT IS NOT
COVERED BY THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you.
•
IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM THE DATE OF ORIGINAL
PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the
above limitations may not apply to you.
213 Industrial Drive • Jackson, TN 38301-9615
Telephone: 1-800-888-2468 , Ext. 2
FAX: 1-800-888-9036
20- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
21- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK FACTS
CALL 1-800-888-2468
TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU FOR REPAIRS
AND SERVICE PART PURCHASES.
Use fresh high quality unleaded gas.
Add stabilizer to fuel tank and run engine for 5 minutes before storage.
GAS
Engine oil: Refer to engine owners manual supplied with this unit.
OIL
Use only cold water.
Do not operate unit with clogged or missing water filter/screen.
Do not operate unit without adequate water supply to pump. Adequate
water supply is a minimum of 20 psi and 5 gpm.
WATER
The pressure setting is preset at the factory to achieve optimum cleaning.
If you need to lower the pressure setting, refer to the operation manual for
proper procedure.
PRESSURE
ADJUSTMENT
Pull gun trigger every 2 minutes while engine is running.
Do not allow water to freeze in pump.
For cold weather or long term storage refer to the operation manual for
proper procedure.
PUMP
Never leave unit running for more than 2 minutes without pulling gun
trigger; doing so could cause damage to pump and void warranty.
BY-PASS MODE
Pump is equipped with a thermal relief valve. If the water overheats, this
valve will open and allow a gush of water to escape. Once the water is
released, the valve closes allowing the pump to operate normally.
THERMAL
RELIEF VALVE
Do not allow hoses to contact the HOT engine muffler during or after use.
Never pull the hose to move the unit.
HOSE
Do not adjust or attempt maintenance without consulting engine manual
or an authorized engine service center.
ENGINE
Add stabilizer to fuel tank and run engine for 5 minutes before storage.
Always turn on the water before starting the engine.
SOAP/CHEMICALS
NOZZLE
Use only soaps and chemicals designed for pressure washer use.
Keep nozzle unclogged. Refer to manual for cleaning procedures.
Chemical/soap cannot be applied in high pressure setting. Only in low
setting.
Follow recommended maintenance schedule for engine & pump. Refer to
manuals.
MAINTENANCE
SCHEDULE
Draw clean water through chemical inlet.
Add stabilizer to fuel tank and run engine for 5 minutes before storage.
Do not allow water to freeze in pump, gun, wand or hoses.
For cold weather or long term storage refer to the operation manual for
proper procedure.
STORAGE OR
WINTERIZING
ALWAYS REFER TO THE MANUALS SUPPLIED WITH THIS UNIT
22- ENG
D27935
Download from Www.Somanuals.com. All Manuals Search And Download.
|