•Please read this manual and save it with your original
sales receipt.
•Tools needed for assembly: two assembly wrenches
(included) and a Phillips Screwdriver (not included).
•Use only with a Power Wheels® 12 Volt Lead-Acid
Rechargeable Battery and a Power Wheels®
12 Volt Charger (both included).
Owner's Manual
with Asssemblyy IInstrucctions
For Models W4715, W4716 and W5540
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
• Read this manual carefully for important safety
• If a thermal fuse in a battery continually trips under
normal driving conditions, please contact your local
Power Wheels® Authorized Service Center.
• To prevent damaging the motors and gears, teach your
child to stop the vehicle before switching direction.
• If you have any questions about your Power Wheels®
vehicle, please call our toll-free service lines at
1-800-348-0751. Trained customer service
representatives are available to take your call in English
or French. Habla Español? Si usted tiene alguna
pregunta ó necesita asistencia llame gratis
1-800-348-0755 para los Estados Unidos. Tenemos
representantes que hablan español para atender
su llamada.
information and operating instructions before using
your vehicle. Keep this manual for future reference,
as it contains important information.
• The vehicle is designed for use on grass, asphalt, and
other hard surfaces; on generally level terrain; and by
children 3 years of age and older. Do not exceed the
maximum weight capacity of 65 lbs (29,5 kg).
• Your new vehicle requires adult assembly. Please set
aside at least 30 minutes for assembly.
• Use this vehicle ONLY outdoors. Most interior flooring
can be damaged by riding this vehicle indoors.
Fisher-Price® will not be responsible for damage
to the floor if the vehicle is used indoors.
• You must charge your battery for 18-30 hours before
you use your vehicle for the first time. We recommend
charging your battery before beginning assembly. Please
see the Battery Charging section for detailed instructions.
• The battery charger is not a toy.
• For your convenience, Power Wheels® maintains an
independently owned and operated Authorized Service
Center Network with more than 300 authorized service
centers nationwide. Our authorized service centers
will repair or replace parts under warranty at no extra
charge, and can perform non-warranty repairs for
a minimal charge. To find the authorized service
center nearest you, please visit us online at
register your vehicle.
• Do not short circuit the battery.
• Adults Note: Regularly examine the charger for
damage to the cord, plug, housing or other parts that
may result in the risk of fire, electric shock or injury. In
the event of any damage, do not use the charger until
the damage has been properly repaired.
• Your Power Wheels® 12 volt battery is equipped
with a built-in thermal fuse. The thermal fuse is
a self-resetting safety device which automatically
“trips” and shuts down operation of the vehicle if the
vehicle is overloaded or the driving conditions too
severe. Once a fuse has “tripped”, remove your foot
from the pedal and wait approximately 25 seconds
before operating the vehicle again. To avoid repeated
automatic shut-downs, avoid severe driving conditions.
00989pr-1056
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLED PARTS
• If you experience a problem with this product, please call us at 1-800-348-0751, rather than return this product
to a store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no
parts are discarded.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper
towel to remove any excess lubricant.
Vehicle
Handlebar
Front Clip
Brush Guard
Seat
12 Volt Battery
12 Volt Charger
2 Front Wheels
2 Rear Wheels
Rear Axle
Plate
4 Wheel Covers
2 Hand Grips
4 Hubcaps
Steering
Column Cap
2 Rear
Wheel Drivers
2 Bushings
2 Wrenches
Parts Not Shown: Decorative Label Sheet and Instructions
#8 x 3/4" (1,9 cm) Screw - 4
#8 x 2" (5 cm) Screw - 2
7/16" (1,1 cm) Washer - 2
3/8" (1 cm)-16 Hex Nut - 3
Fasteners Shown Actual Size
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws.
00989pr-1056
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLED PARTS
Note: Some parts shown are assembled on both sides of the vehicle. Fasteners not shown.
00989pr-1056
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CHARGING
• Make sure you charge the battery for at least 18 hours
using the enclosed Power Wheels® 12 volt charger
before operating your vehicle for the first time.
Charge the battery for at least 14 hours after each use
of the vehicle. Never charge the battery longer than
30 hours. Failure to follow these instructions may
damage your battery and will void your warranty.
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure
a child if vehicle tips over.
Always use battery retainer.
• Use only a Power Wheels® 12 volt charger with “12V”
connector (input 120 VAC, 60Hz, with an output of
12 VDC) to charge your Power Wheels® 12 volt battery.
• PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a fire
resulting in serious injury and could
also ruin the electrical system.
- Use of the wrong type battery
or charger could cause a fire or
explosion resulting in serious injury.
- Use of Power Wheels® components
in products other than
Power Wheels® vehicles could
cause overheating, fire or explosion.
• The battery must be handled
by adults only. The battery is
heavy and contains sulfuric acid
(electrolyte). Dropping the battery
could result in serious injury.
• Never allow children to charge the
battery. Battery charging must be
done by adults only. A child could
be injured by the electricity involved
in charging the battery.
Charger
Connector
•
Plug the charger connector into the battery socket.
Plug the charger into a standard wall outlet.
Notes:
- Battery must be upright while charging.
- If power flow to the wall outlet is controlled by
a switch, make sure the switch is “ON”.
- Use the charger only in a wall outlet. Do not plug
the charger into a ceiling outlet.
• Before charging the battery, examine the battery
case for cracks and other damage which may
cause sulfuric acid (electrolyte) to leak during
the charging process. If damage is detected, do
not charge the battery or use it in your vehicle.
Battery acid is very corrosive and can cause
severe damage to surfaces it contacts.
• Read the safety instructions on
the battery.
• Examine the battery, charger and
their connectors for excessive wear
or damage each time you charge
the battery. If damage or excessive
wear is detected, do not use the
charger or the battery until you have
replaced the worn or damaged part.
• You do not need to remove the battery from your
vehicle to recharge it.
• Do not place the battery on a surface (such as
kitchen counter tops) which could be damaged
by the acid contained inside the battery. Take
precautions to protect the surface on which you
place your battery.
• Charge the battery in a well ventilated area.
• Once the battery is charged, disconnect the
charger from the battery. Unplug the charger
from the wall outlet. Refer to the Battery
Installation section for instructions to install your
battery. If your battery is already installed in your
vehicle, simply re-connect the motor harness
connector to the battery.
CAUTION
Use the charger in dry locations only.
00989pr-1056
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Motor Assembly
Rear Wheel
(Pegged Side First)
WARNING
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle's unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
Rear Wheel Driver
Wheel Cover
(Slotted Side Out) (Indented Side Out)
Rear Wheel Driver
(Slotted Side Down)
3
• Slide a rear wheel driver, slotted side out, onto the
rear axle. Make sure the rear wheel driver fits into the
pins in the motor assembly inside the vehicle.
• Locate the other rear wheel. Slide the wheel, flat side
first, onto the rear axle. Make sure the slots on the
rear wheel driver fit onto the pegs on the wheel.
Rear Wheel
(Indented Side Down)
• Slide a wheel cover, indented side out, onto the
rear axle.
Wheel Cover
(Indented Side Down)
1
• Slide a wheel cover, indented side down, onto the
rear axle.
Wrench
• Locate a rear wheel. Slide the wheel, indented side
down, onto the rear axle.
• Slide a rear wheel driver, slotted side down, onto the
rear axle. Fit the slots on the rear wheel driver onto the
pegs on the wheel.
3/8" (1 cm) -16 Hex Nut
4
Motor Assembly
•
Fit a 3/8" (1 cm) -16 hex nut onto the end of the rear
wheel assembly.
• Tighten the hex nut on of the rear wheel assembly with
the wrench.
Hint: An extra wrench has been provided to hold the hex
nut on the other side of the rear axle while tightening
the hex nut on the other side.
Rear Axle Assembly
• You may need the help of another adult to hold the
rear wheel assembly while you tighten the hex nut.
2
BOTTOM VIEW
• Position the vehicle upside down.
• Slide the rear axle assembly through the hole in the
back end of the vehicle, as shown. Make sure the rear
wheel driver fits into the pins in the motor assembly
inside the vehicle.
00989pr-1056
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Steering Column
Connector
Steering Column Cap
7
BACK VIEW
• Turn the vehicle upright.
5
• Fit the steering column cap onto the end of the
steering column.
• Insert a #8 x 3/4" (1,9 cm) screw through the large
opening in the steering column cap and into the hole
in the steering column. Tighten the screw.
•
Fit the handlebar steering column and connector down
through the large opening in the front end of the vehicle.
Steering Column
Plate
BOTTOM VIEW
6
• While holding the handlebar in place, carefully turn the
vehicle over. Check to be sure the steering column fits
through the hole in the steering linkage.
8
• Slide the plate under the steering column, as shown.
Insert a #8 x 3/4" (1,9 cm) screw into the plate and tighten.
•
00989pr-1056
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Front Wheel
(Flat Side First)
Washer
Bushing
Front Axle
(Ring End First)
Wheel Cover
(Indented Side Out)
9
Front Clip
• Slide a 7/16" (1,1 cm) washer onto the front axle.
• Slide a bushing, ring end first, onto the front axle.
• Locate a front wheel. Slide the wheel, flat side first,
onto the front axle.
FRONT VIEW
12
• Fit the front clip onto the front of the vehicle, as shown.
Hint: The front clip may be factory assembled.
•
Slide a wheel cover, indented side out, onto the front axle.
• Repeat this procedure on the other side of the vehicle.
3/8" (1 cm) -16 Hex Nut
Wrench
10
• Fit a 3/8" (1 cm) - 16 hex nut onto each end of the front
axle. Tighten both hex nuts with the wrench.
Brush Guard
13
• Fit the brush guard onto the front clip.
• Insert two #8 x 3/4" (1,9 cm) screws into the lower
Hubcaps
holes in the brush guard and tighten.
Hubcaps
11
• “Snap” a hubcap onto the center of each wheel cover.
• Turn the vehicle upright.
00989pr-1056
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Drive Buttons
A
Seat
B
14
• Insert two #8 x 2" (5 cm) screws into the upper holes
in the brush guard and tighten.
Hand Grip
Hand Grip
17
• Fit the tab at the front of the seat into the slot below
A
the drive buttons
.
• “Snap” the tab at the back of the seat into the slot
B
near the rear of the vehicle
.
Decorative Labels
• Please refer to the Decoration instructions included
on a separate sheet to apply decorative labels to
your product.
•
Before applying the labels, wipe the surface of the vehicle
with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
For best results, avoid repositioning a label once it has
been applied to the vehicle.
• After applying a label, rub the label firmly with a clean,
dry cloth to make sure the label is adhered to your
vehicle. Start at the center of a label, and smooth
towards the outer edges to remove air bubbles.
BACK VIEW
15
• Fit both hand grips on the ends of the handlebar.
Hint: If it is difficult to slide a hand grip onto the
handlebar, moisten the inside of the grip with water.
Drive Buttons
Connector
16
• Locate the opening below the drive buttons.
• Reach into the opening and pull the high speed
connector out through the opening.
•
Refer to page 13 for information on high speed operation.
00989pr-1056
10
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION
IMPORTANT! Use only a Power Wheels® 12 volt battery.
Use of any other battery will damage your vehicle.
Battery Retainer
Seat
1
3
• Press the tab under the back edge of the seat and lift
to remove the seat.
•
Carefully lower the battery into the battery compartment.
The battery retainer slides over the battery to secure it.
Drive Buttons
A
Seat
Battery
Retainer
Power Wheels®
12 Volt Battery
B
Motor Harness
Connector
4
2
•
Lift the battery retainer to access the battery compartment.
• Fit the tab at the front of the seat into the slot below
A
the drive buttons
.
• Place the battery upright in the battery compartment.
• “Snap” the tab at the back of the seat into the slot
• Plug the motor harness connector into the battery.
Push firmly.
B
near the rear of the vehicle
.
00989pr-1056
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFE DRIVING RULES
Before children use this vehicle, an adult should carefully
evaluate the driving area as well as the child’s skill level
and ability to drive the vehicle safely. Teach appropriate
safety rules to your child before allowing operation of
this vehicle. These rules should also be reviewed with
other playmates who want to drive the vehicle.
• A child who is not sitting on the seat could fall off,
cause a tip over or block the driver’s view.
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required.
• Never Ride at Night.
• Keep Children Within Safe
Riding Areas.
These areas must be:
• Only operate the vehicle in the daytime in a well-lit area.
• Driving near steep inclines can cause:
-The vehicle to gain unsafe speed, even if the pedal is
released to stop.
-The vehicle to tilt and tip over
-The wheels to lose traction, causing the vehicle to slip.
-The vehicle could roll backwards at an unsafe speed.
• Never put anything near any moving parts. Rotating
parts, such as motors, gear boxes and wheels, can
snag fingers, hair, etc., causing serious injury.
• Do not allow operation of the vehicle when it is on its
side or in an upside-down position.
• Do not operate the vehicle near flammable vapors
(gasoline, paint thinner, acetone, liquid wax, etc.).
The vehicle’s electrical switches, like most electrical
switches, emit an internal spark when first turned on
or turned off, which could cause an explosion or fire.
• To prevent unsupervised use of the vehicle, disconnect
the motor harness from the battery when the vehicle is
not in use.
- Away from swimming pools and
other bodies of water to prevent
drownings.
- Generally level to prevent tipovers.
- Away from steps, steep inclines,
cars, roads and alleys.
• Riding Rules
Make sure children know and follow
these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
Use vehicle on generally level ground ONLY!
00989pr-1056
12
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE OPERATION
As assembled, your vehicle is ready to roll in low speed (21/2 mph/4 km/h, maximum). After your child has mastered the
basic skills of driving and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow
the vehicle to operate in low or high speed. See the instructions in this section to connect the high speed connectors and
operate the vehicle at high speed.
Beginner Use - Low Speed Drive
Advanced Use - High Speed
Drive Buttons
• Press a DRIVE button below the handlebar.
• Press the foot pedal. The vehicle goes forward or in
• Remove the seat to access the high speed hook-up.
reverse at a maximum of 2½ mph/4 km/h.
• Locate the high speed connector in the opening
inside the front end of the vehicle. Plug the high
speed connector (with yellow tag) into the matching
connector (with yellow tag).
• Re-assemble the seat.
• To prevent operation of the vehicle in high-speed,
simply disconnect the high speed connectors.
• Help your child practice steering to learn how far and
how quickly to turn the handlebar when driving.
IMPORTANT! To prevent damaging the motors and
gears, teach your child to stop the vehicle before
switching direction.
STOP!
Twist Grip
to Activate
High Speed
• Your vehicle has a patented, electronic braking system that
automatically stops the vehicle when your child’s foot lifts
from the pedal.
• Make sure your child is comfortable with steering the
vehicle and automatically knows how to stop.
• Turn the right grip to shift the vehicle into high
speed. The vehicle drives forward at a maximum
of 5 mph/8 km/h.
• Help your child practice steering to learn how far
and how quickly to turn the handlebar when driving
forward in high speed.
00989pr-1056
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CARE
VEHICLE CARE
If a battery leak develops, avoid contact with the
leaking acid and place the damaged battery in a plastic
bag. See next section for proper disposal.
If acid comes in contact with skin or eyes, flush with
cool water for at least 15 minutes and call a physician.
• Check all screws and their protective coverings
regularly and tighten as required. Check plastic parts
on a regular basis for cracks or broken pieces.
• During snowy or rainy weather, the vehicle should be
stored inside or under a protective cover.
• Avoid operating the vehicle in wet or snowy conditions.
Water or moisture in the motors or electrical switches
can cause them to corrode, and could cause switch
or motor failure.
• Avoid operating the vehicle on sand, loose dirt or
gravel. Sand, loose dirt or gravel in the motors or
electrical switches can cause them to jam, and could
cause switch or motor failure.
If acid is internally ingested, give water, milk of
magnesia or egg whites immediately. Never give
emetics or induce vomiting. Call a physician.
• Do not allow the battery to run down completely
before charging.
• Charge the battery before storing the vehicle, and at least
once per month, even if the vehicle has not been used.
• Charge the battery after each use, regardless of how
long the vehicle was used.
• Leaving the battery in a discharged condition will ruin it.
• Always remove an exhausted battery from the vehicle.
Battery leakage and corrosion can damage the vehicle.
• Do not store the battery in temperatures above
75° F or below -10° F.
• The vehicle can be wiped down with a soft, dry cloth.
For a shiny finish, you can wipe plastic parts with
a non-wax furniture polish applied to a soft cloth.
Do not use automotive wax. Do not use soap and
water or spray the vehicle with a hose.
• To ensure your vehicle stays in good operating order,
we recommend you periodically have your vehicle
®
checked by a Power Wheels authorized service center.
BATTERY DISPOSAL
®
• Your Power Wheels battery is a non-spillable, sealed
LIMITED WARRANTY
lead-acid battery. It must be recycled or disposed
of in an environmentally sound manner.
• Do not dispose of a lead-acid battery in a fire. The
battery may explode or leak.
• Do not dispose of a lead-acid battery in your regular,
household trash. The incineration, landfilling or mixing
of sealed lead-acid batteries with household trash is
prohibited by law in most areas.
Bumper-to-Bumper* Limited Warranty
*One year limited warranty from the date of
®
purchase on the Power Wheels vehicle.
Six month limited warranty on the
12 volt battery.
• Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities
(Europe only).
For the original purchaser, this one year limited warranty
®
covers the Power Wheels ride-on vehicle (purchased
®
from Power Wheels ) against defects in materials and
workmanship. The six month limited warranty applies
• Return an exhausted battery to a federal or state
approved lead-acid battery recycler, such as
®
only to the 12 volt battery included by Power Wheels
with the original purchase of the vehicle. This warranty
covers normal use and does not cover the
®
a Power Wheels authorized service center or a local
seller of automotive batteries. Contact your local waste
management officials for other information regarding
the environmentally sound collection, recycling and
disposal of lead-acid batteries. If you live in the State
of Florida or the State of Minnesota, it is prohibited by
law for anyone to throw away lead-acid batteries in the
municipal waste stream.
®
Power Wheels vehicle or battery if damaged by
unreasonable use, neglect, accident, abuse, misuse,
improper service or other causes not arising out of
defects in materials or workmanship. Evidence of any
attempt at consumer repair will void this warranty.
THIS WARRANTY DOES NOT COVER, AND IS
INTENDED TO EXCLUDE, ANY LIABILITY ON THE
PART OF POWER WHEELS®, WHETHER UNDER THIS
WARRANTY OR IMPLIED BY LAW FOR ANY INDIRECT
OR CONSEQUENTIAL DAMAGES FOR BREACH OF
WARRANTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION SO THIS LIMITATION
MAY NOT APPLY TO YOU.
Should you need service or assistance with your vehicle
during the warranty period, do not return the vehicle to
®
the store. Power Wheels has provided a nationwide
network of authorized service centers. If there is not an
authorized service center in your area, please visit us
Relations for information, 1-800-348-0751.
This warranty gives you specific legal rights, and you may
also have other rights which may vary from state to state.
PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.
00989pr-1056
14
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Statement
ICES-003
• This Class B digital apparatus complies with Canadian
United States Only
ICES-003.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
NMB-003
• Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
• L’utilisation de ce dispositif est autorisée seulement
aux conditions suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could
void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
00989pr-1056
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below.
If you still experience a problem, please contact Power Wheels® Consumer Relations, or your local Power Wheels®
authorized service center.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle does not run
Undercharged battery
Charge the battery. A new battery should have
been charged for at least 18 hours before using
the vehicle for the first time. After first-time use,
recharge the battery for at least 14 hours after each
use. Never charge the battery longer than 30 hours.
Check all connectors. Make sure the charger
connector is plugged into the battery, and that the
charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Charger is not working
Tripped thermal fuse
There is no sure way to tell if your charger is
working unless you have a volt meter. If you suspect
there is a problem with your charger, contact your
local Power Wheels® authorized service center.
They can test your charger for you.
The built-in thermal fuse may “trip” and shut down
operation of the vehicle if the vehicle is overloaded
or the driving conditions too severe. Once a fuse
has “tripped”, remove your foot from the pedal and
wait approximately 25 seconds before operating
the vehicle again. To avoid repeated automatic
shutdowns, do not overload the vehicle by
exceeding the 65 lbs (29,5 kg) maximum weight
capacity or by towing anything behind the vehicle.
Do not drive up hills or run into fixed objects, which
can cause the wheels to stop spinning while power
is still being supplied to the motors. If a thermal fuse
continually trips, contact your local Power Wheels®
authorized service center.
Loose wire or loose connectors
Dead battery
Check all wires and connectors. Make sure the motor
harness connector is plugged into the battery, and
that there are no loose wires around the motors.
If your battery is old or if you have not followed
Battery Care instructions, your battery may be dead.
If you are unsure whether or not the battery is dead,
you can have it tested at your local Power Wheels®
authorized service center.
Electrical switch damage
Motor damage
The electrical switches can become corroded due to
exposure to water or moisture, or can jam due to loose
dirt, sand or gravel. Contact your local Power Wheels®
authorized service center for diagnosis and repair.
Contact your local Power Wheels® authorized
service center for diagnosis and repair.
00989pr-1056
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle was running but
suddenly stopped
Loose wire or loose connectors
Check all wires and connectors. Make sure
the motor harness connector is plugged into
the battery, and that there are no loose wires
around the motors.
Tripped thermal fuse
The built-in thermal fuse may “trip” and shut
down operation of the vehicle if the vehicle is
overloaded or the driving conditions too severe.
Once a fuse has “tripped”, remove your foot from
the pedal and wait approximately 25 seconds
before operating the vehicle again. To avoid
repeated automatic shutdowns, do not overload
the vehicle by exceeding the 65 lbs (29,5 kg)
maximum weight capacity or by towing
anything behind the vehicle. Do not drive up
hills or run into fixed objects, which can cause
the wheels to stop spinning while power is
still being supplied to the motors. If a thermal
fuse continually trips, contact your local
Power Wheels® authorized service center.
Short run time (Less than
1 - 3 hours per charge)
Undercharged battery
Charge the battery. A new battery should have
been charged for at least 18 hours before using
the vehicle for the first time. After first-time use,
recharge the battery for at least 14 hours after
each use. Never charge the battery longer than
30 hours.
Check all wires and connectors. Make sure the
charger connector is plugged into the battery,
and that the charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Overcharged battery
Do not charge the battery longer than 30 hours.
If you suspect that your battery is damaged
as a result of overcharging, contact your local
Power Wheels® authorized service center.
They can test your battery for you.
Battery is old and will not accept
full charge
Even with proper care, a rechargeable battery
does not last forever. Average battery life is
1 to 3 years depending on vehicle use and
use conditions. Replace the battery with a new
Power Wheels® 12 volt rechargeable battery.
Do not substitute parts.
Tripped thermal fuse
The built-in thermal fuse may “trip” and shut
down operation of the vehicle if the vehicle
is overloaded or the driving conditions too
severe. Once a fuse has “tripped”, remove your
foot from the pedal and wait approximately
25 seconds before operating the vehicle again.
To avoid repeated automatic shutdowns, do
not overload the vehicle by exceeding the
65 lbs (29,5 kg) maximum weight capacity or
by towing anything behind the vehicle. Do not
drive up hills or run into fixed objects, which
can cause the wheels to stop spinning while
power is still being supplied to the motors. If
a thermal fuse continually trips, contact your
local Power Wheels® authorized service center.
00989pr-1056
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
v
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle runs sluggishly
Undercharged battery
Charge the battery. A new battery should have
been charged for at least 18 hours before using
the vehicle for the first time. After first-time use,
recharge the battery for at least 14 hours after
each use. Never charge the battery longer than
30 hours.
Check all connectors. Make sure the charger
connector is plugged into the battery, and that
the charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Be sure to charge the battery after each use.
Battery needs charging
Battery is old and will not accept
full charge
Even with proper care, a rechargeable battery
does not last forever. Average battery life is
1 to 3 years depending on the vehicle use and
use conditions. Replace the battery with a new
Power Wheels® 12 volt rechargable battery.
Do not substitute parts.
Vehicle is overloaded
Make sure you do not overload the vehicle
by allowing more than one rider at one time,
by exceeding the 65 lbs (29,5 kg) maximum
weight capacity, or by towing objects behind
the vehicle.
Driving conditions are too stressful
High speed lock-out not disconnected
Restrict your child's driving to areas that are
generally level only.
Vehicle runs in low speed, but
does not run in high speed.
The vehicle was pre-set to run only in low
speed. To allow the vehicle to run in low and
high speed, you must connect the High Speed
connectors. Follow the instructions on page 13.
Note: The high speed connectors must be
joined to use the high speed grip.
Please note: The vehicle is
designed to operate in low
speed only in reverse
.
00989pr-1056
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
When the foot pedal is pressed
one rear wheel spins
Operation of vehicle in low speed
It is possible that only one rear wheel may
spin when both rear wheels are raised off
the ground and the vehicle is in low speed.
This does not necessarily indicate a problem.
Check for proper operation of the drive system
by raising the rear wheels off the ground
and pressing the foot pedal. If only one rear
wheel spins, carefully press your hand on the
spinning wheel to slow it down. The other rear
wheel should begin to spin. If the other rear
wheel does not begin to spin, there may be
a problem with the vehicle. Contact your local
Power Wheels® authorized service center for
diagnosis and repair.
Sometimes the vehicle doesn’t
run, but other times it does
Loose wire or connector
Check all wires around the motors and all
connectors to make sure they are tight.
Motor or electrical switch damage
Loose wire or connector
Contact your local Power Wheels® authorized
service center for diagnosis and repair.
When the foot pedal is
pressed, the vehicle won’t run
without a push
Check all wires around the motors and all
connectors to make sure they are tight.
“Dead Spot” on motor
Damaged battery
Contact your local Power Wheels® authorized
service center for diagnosis and repair.
Battery's thermal fuse
constantly "trips", but the
vehicle is not overloaded
nor the driving conditions
too severe
Contact your local Power Wheels® authorized
service center for diagnosis and repair.
Child is switching between FORWARD
and REVERSE without stopping
Teach your child to stop the vehicle before
switching direction.
Loud clacking or grinding noise
from a motor-gearbox
Broken gears
Contact your local Power Wheels® authorized
service center for diagnosis and repair.
Charger gets warm during use
It is normal for some chargers to get
warm during use and is not reason for
concern.
No action required.
If your charger does not get warm during use,
it does not mean that it is not working properly.
Battery makes a sizzling or
gurgling noise when charging
It is normal for some batteries to make
noise and swell slightly while charging
and is not reason for concern.
No action required.
If your battery does not make noise or swell
slightly during charging, it does not mean that
it is not accepting the charge.
00989pr-1056
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before first-time use,
you must charge the
battery 18 hours!
Charge the battery immediately after each use.
Charge the battery once a month, even if the vehicle is not used or stored.
Do not return
your vehicle to the store!
We're a toll-free phone call away, and we can help.
If you are missing parts or need assistance, please call:
1-800-348-0751
Or contact your local independently owned and operated
®
Power Wheels Authorized Service Center.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2011 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO
00989pr-1056
Download from Www.Somanuals.com. All Manuals Search And Download.
|