GE Monogram Refrigerator ZDBR240 User Manual

Owners  
Manual  
Beverage Center  
ZDBR240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Consumer Information  
Beverage Center  
The warranty does not cover damage  
caused after delivery.  
Immediately contact the dealer (or  
builder) that sold you the beverage center.  
If you received  
a damaged  
appliance  
Save time  
& money  
Before you request service, check the  
It lists causes of minor operating problems  
Problem Solver in the back of this manual. that you can correct yourself.  
Before using, be sure all packing materials new appliances is an application of  
Remove  
packaging  
and tape have been removed.  
household liquid detergent. Apply with  
a soft cloth and allow to soak. Wipe dry  
and then apply an appliance polish to  
thoroughly clean and protect the surface.  
To assure no damage is done to the finish  
of the product, the safest way to remove  
the adhesive left from packaging tape on  
To obtain service, see the Consumer  
For customers in Canada:  
If you  
need  
service  
Services page in the back of this manual.  
FIRST, contact the people who serviced  
your appliance. Explain why you are not  
pleased. In most cases, this will solve the  
problem.  
We are proud of our service and want you  
to be pleased. If for some reason you are  
not happy with the service you receive,  
here are steps to follow for further help.  
NEXT, if you are still not pleased, write  
all the details—including your phone  
number to:  
For customers in the USA:  
FIRST, contact the people who serviced  
your appliance. Explain why you are not  
pleased. In most cases, this will solve the  
problem.  
Manager, Consumer Relations  
Camco Inc.  
1 Factory Lane, Suite 310  
Moncton, N.B. E1C 9M3  
NEXT, if you are still not pleased, write  
all the details—including your phone  
number—to:  
Manager, Customer Relations  
GE Appliances  
Appliance Park  
Louisville, KY 40225  
• Promptly inspect your new Monogram  
beverage center. If it has been damaged,  
contact the Installer or Dealer  
immediately.  
Test the door swing. Carefully open and  
close the door. The door should not rub  
or catch on adjacent cabinetry. Notify the  
installer if the door makes contact with  
cabinetry.  
After  
installation  
is completed  
• This beverage center must be properly  
leveled to ensure correct door alignment Please Contact the Installer or Dealer if  
and door closure. Contact the Installer if you experience any of these problems.  
the unit is not level.  
Your beverage center is shipped with a  
black toekick on the front of the unit. For  
shipping purposes, an optional stainless  
steel toekick is secured to the back of the  
unit. That toekick should have been  
removed and installed, or given to you.  
Keep the unused toekick and other unused  
or removed parts for possible future use.  
• The unit should be centered in the  
opening. The front face of the door  
should be 1forward of adjacent  
cabinetry. Contact the installer if  
clearance is not correct.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
READ AND SAVE THESE INSTRUCTIONS  
BEFORE IT IS USED, THE APPLIANCE MUST BE PROPERLY INSTALLED  
AND LOCATED AS DESCRIBED IN THIS MANUAL.  
wDANGER: RISK OF CHILD ENTRAPMENT  
Child entrapment and suffocation  
Before You Throw Away Your Old  
are not problems of the past. Junked or  
abandoned refrigeration products are  
still dangerous…even if they will sit for  
“just a few days.” If you are getting rid of  
your old appliance, please follow these  
instructions to help prevent accidents.  
Refrigeration Product:  
Take off the doors.  
Leave the shelves in place so that  
children may not easily climb inside.  
REFRIGERANTS  
All refrigeration products contain  
If you are getting rid of an old refrigeration  
refrigerants, which under federal law must product, check with the company handling  
be removed prior to product disposal.  
the disposal about what to do.  
DO NOT USE AN ADAPTER PLUG OR EXTENSION CORD  
(Adapter plugs not permitted in Canada)  
Do not use an adapter plug to connect the  
refrigerator to a 2-prong outlet.  
Do not use an extension cord with this  
appliance.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ  
LIRE ET CONSERVER CES INSTRUCTIONS  
AVANT D’ÊTRE UTILISÉ, L’APPAREIL MÉNAGER DOIT ÊTRE BIEN  
INSTALLÉ ET SE TROUVER À L’ENDROIT DÉCRIT DANS CETTE MANUEL.  
wDANGER! RISQUES POUR LES ENFANTS  
Les enfants pris au piège ou morts  
Avant de vous débarasser de votre vieux  
d’asphyxie sont toujours d’actualité.  
Les appareils de réfrigération abandonés  
sont toujours aussi dangereux, même si  
on n’attend que “quelque jours” pour  
s’en débarasser. Si vous ne gardez pas  
votre ancien appareil, veuillez suivre  
les directives ci-dessous afin de prévenir  
les accidents.  
appareil de réfrigération :  
Démontez les portes.  
Laissez les clayettes en place afin  
d’empêcher les enfants de grimper à  
l’intérieur.  
RÉFRIGÉRANTS  
Tous les appareils de réfrigération  
contiennent des refrigerants qui,  
conformément aux lois fédérales, doivent  
être enlevés avant toute élimination de  
l’appareil.  
Si vous vous débarrassez de vieux appareils  
de réfrigération, vérifiez, auprès de la  
société qui s’occupe de leur élimination,  
ce que vous devez faire.  
NE PAS UTILISER DE FICHE D’ADAPTATION OU  
DE CORDON PROLONGATEUR  
(Fiches d’adaptation non permises au Canada)  
N’utilisez pas de fiche d’adaptation pour  
brancher le réfrigérateur dans une prise à  
2 broches.  
N’utilisez pas de cordon prolongateur avec  
cet appareil.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
HOW TO CONNECT ELECTRICITY  
Do not, under any circumstances, cut or  
The appliance should always be plugged  
remove the third (ground) prong from the into its own individual electrical outlet  
power cord. For personal safety, this  
appliance must be properly grounded.  
which has a voltage rating that matches  
the rating plate. This provides the best  
performance and also prevents  
overloading house wiring circuits  
which could cause a fire hazard from  
overheated wires.  
The power cord of this appliance is  
equipped with a 3-prong (grounding)  
plug which mates with a standard 3-prong  
(grounding) wall outlet to minimize the  
possibility of electric shock hazard from  
this appliance.  
Never unplug an appliance by pulling  
on the power cord. Always grip the  
plug firmly and pull straight out from  
the outlet.  
Have the wall outlet and circuit checked  
by a qualified electrician to make sure  
the outlet is properly grounded.  
Repair or replace immediately all power  
cords that have become frayed or  
otherwise damaged. Do not use a cord  
that shows cracks or abrasion damage  
along its length or at either end.  
Where a standard 2-prong wall outlet  
is encountered, it is your personal  
responsibility and obligation to have  
it replaced with a properly grounded  
3-prong wall outlet.  
When moving the appliance, be careful  
not to roll over or damage the power  
cord.  
SAVE THESE INSTRUCTIONS  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ  
RACCORDEMENT ÉLECTRIQUE  
Ne coupez ni retirez en aucun cas la  
Le appareil doit toujours être branché  
dans sa propre prise de courant, dont la  
tension nominale est identique à celle  
indiquée sur la plaque signalétique.  
troisième broche (mise à la terre) de la  
fiche du cordon d’alimentation. Pour  
votre sécurité, cet appareil doit être  
correctement mis à la terre.  
Cette précaution est recommandée pour  
garantir un rendement optimum et éviter  
une surcharge des circuits électriques de  
la résidence, ce qui pourrait créer un  
risque d’incendie par surschauffe des fils.  
Le cordon d’alimentation de cet appareil  
est muni d’une fiche à 3 broches (mise à  
la terre) qui se branche dans une prise  
mural ordinaire à 3 alvéoles (mise à la  
terre) pour réduire au minimum les  
risques du chocs électriques.  
Ne débranchez jamais l’appareil en  
tirant le cordon d’alimentation.  
Faites examiner la prise de courant et le  
circuit par un électricien qualifié pour  
vous assurer que la prise est correctement  
mise à la terre.  
Saisissez fermement la fiche du cordon  
et tirez droit pour la retirer de la prise.  
Réparez ou remplacez immédiatement  
tout cordon effiloché ou endommagé.  
N’utilisez pas un cordon fendillé ou  
présentant des signes d’usure.  
Si la prise murale est du type standard  
à 2 alvéoles, il vous incombe de la faire  
remplacer par une prise à 3 alvéoles  
correctement mise à la terre.  
Lorsque vous déplacez l’appareil du mur,  
faites attention de ne pas la faire rouler  
sur le cordon d’alimentation afin de ne  
pas l’endommager.  
CONSERVEZ CES DIRECTIVES  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Features  
Beverage Center  
The operating temperatures of the  
To change the temperature settings,  
press the + and – pads until you reach  
the desired set temperature. After several  
seconds, the display will return to the  
actual temperature. The actual temperature  
will be displayed while the unit moves  
toward the set temperature.  
Temperature  
control  
beverage center range from 40°F to 65°F.  
Do not install the beverage center where  
the temperature will go below 55°F or  
above 90°F.  
The temperature display shows the actual  
temperature of the beverage center. The  
actual temperature may vary slightly from  
the set temperature based on factors such  
as door openings, amount of beverages  
and room temperature. After making  
adjustments, allow 12 to 24 hours for the  
beverage center to reach the temperature  
you have set and before making any  
further adjustments. The factory setting  
is 45°F.  
Allow 12 to 24 hours for the beverage  
center to reach the temperature you have  
set and before making any adjustments  
to the initial setting.  
This child control lockout feature  
prevents unwanted changes to your  
temperature settings.  
After the desired temperature is set, the  
temperature can be locked. To lock, press  
both the + and pads at the same time for  
five seconds. To unlock, press both + and  
pads for five seconds.  
Child control  
lockout  
The interior light makes it easy to view  
your beverage labels and enhances the  
display of your collection.  
When the pad is depressed and the word  
ON is displayed, the light will remain on  
for one hour before automatically turning  
off. When the pad is depressed and the  
word OFF is displayed, the light will come  
on only when the door is opened. For best  
viewing, do not store a bottle on the top  
shelf directly under the light. Remember  
to turn off the light when it is no longer  
needed.  
Interior light  
and light pad  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Features  
Beverage Center  
Tempered glass shelves in the beverage  
center unit are removable for easy  
cleaning or for storing larger items.  
To replace a shelf, open the door  
completely to avoid potential damage  
to the gasket. Tilt the shelf to one side  
at an angle and slide toward the back wall,  
placing one side onto the shelf support.  
Place the other side onto the opposite  
shelf support. Ensure rear locking tabs  
are engaged. When installed properly,  
the shelf will not slide forward when  
gently pulled.  
Glass shelves  
To remove a shelf, open the door  
completely to avoid potential damage to  
the gasket. Lift up on the back of the shelf  
slightly. Tilt the shelf to one side at an  
angle while pulling forward.  
Appearance may vary  
To remove, lift up on the back of the shelf  
Tilt the shelf at an angle while removing  
or replacing  
Place in slots when replacing the shelf  
QuickSpace™  
shelf  
Step 1  
This shelf splits in half and slides under  
itself for storage of tall items on the shelf  
below.  
Step 1: Lift the back edge of the front half  
of the shelf.  
Step 2  
Step 2: Pull slightly forward.  
Step 3: Lower the back edge of the front  
half of the shelf while sliding it underneath  
the back half.  
The entire Quick Space shelf can be  
removed and replaced (see Glass Shelves  
section).  
Step 3  
The interior fan is located in the rear wall  
of the beverage center, and is designed to  
run continuously to help maintain the  
proper cooling temperature. The interior  
fan will only turn off when the door is  
opened.  
Interior fan  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Features  
Beverage Center  
The bottom two full extension drawers  
hold five bottles each and are loaded with  
necks facing the rear. Tall bottles should  
not be loaded on the bottom drawer  
because they may prevent the door from  
closing.  
Loading  
tips and  
suggestions  
• Do not block the thermistor, located on  
the right-hand side, just above the third  
shelf of the beverage center. Blocking  
the thermistor could impair the air  
circulation and temperature control.  
NOTE: This unit is for storing beverages  
only and not intended for the storage of  
perishable foods.  
Bottom drawer arrangement  
The bottom full extension drawers pull  
out so bottles can conveniently be added  
or removed.  
Removing  
full  
extension  
drawers  
The upper full extension slide can be  
removed for magnums or larger bottles.  
To remove:  
Tab (push tab down on right  
drawer guide, pull tab up on  
left drawer guide)  
1. Pull the full extension drawer out to the  
STOP position.  
2. Push the tab on right drawer guide  
down while pulling the tab on left guide  
up, and pull the drawer out.  
Appearance may vary  
Sub-assembly  
To replace:  
Sub-assembly  
1. Push the drawer slide arm back into  
the unit.  
To replace, push drawer slide  
arm back into unit  
Pull small slide sub-assembly  
completely forward  
2. Pull the small slide sub-assembly  
completely forward.  
NOTE: Make sure the tabs on the full  
extension drawer guides are fully engaged  
before loading any bottles. Pull the drawers  
out all the way to the STOP position and  
push back in several times to make sure  
locking tabs are properly engaged.  
3. Insert the sides of the drawer back  
into the guides.  
4. Push until the tabs lock into place.  
The full extension drawer fronts on the  
beverage center are unfinished cherry  
wood. During use, oil from hands may  
accumulate and stain the wood.  
Apply the stain and sealer according to  
the manufacturer’s instructions. To avoid  
unpleasant odor, keep the door open to  
ventilate and allow the stain/sealer to dry  
completely before using the product.  
Wood  
drawer  
fronts  
The drawer fronts may be stained and  
sealed to match adjacent cabinetry. The  
tinted glass will make the stained wood  
appear darker. A true color match can be  
seen only when the door is opened.  
NOTE: Natural wood may vary slightly in  
grain and color.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Cleaning  
Beverage Center  
Unplug the beverage center before cleaning. If the unit is in a built-in location,  
remove power at the circuit breaker.  
For your  
safety  
The exterior surfaces can be washed with  
mild soap and water. Rinse thoroughly  
with clear water. Never use abrasive  
scouring powders.  
Do not use scouring pads, powdered  
cleaners, bleach or cleaners containing  
bleach because these products can scratch  
and damage the finish.  
Cleaning  
the outside  
Warranty does not cover damage due to  
improper cleaning methods.  
Use a glass cleaner or mild soap and water  
and a soft cloth to clean the glass door.  
Do not use any abrasive powders.  
Glass door  
Door gasket  
The vinyl gasket may be cleaned with mild After cleaning the door gasket, apply a  
soap and water, a baking soda solution or  
a mild scouring powder. Rinse well.  
thin layer of paraffin wax or petroleum  
jelly to the door gasket at the hinge side.  
This helps keep the gasket from sticking  
and bending out of shape.  
Unplug the beverage center before  
replacing the light bulb. If the unit is  
in a built-in location, remove power  
at the circuit breaker.  
To remove the light shield, push in the tab  
on the left side of the shield and lower it.  
Replace with a 15 watt appliance bulb.  
Light bulb  
replacement  
If the power fails, open the door as  
infrequently as possible to maintain  
the temperature.  
Do not store or use gasoline or other  
flammable vapors and liquids in the  
vicinity of this or any other appliance.  
In the event  
of a power  
failure  
Secure all loose items such as shelves and  
drawers by taping them securely in place  
to prevent damage.  
Be sure the beverage center stays in an  
upright position during moving.  
Preparing  
to move  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Cleaning  
Beverage Center  
For your  
safety  
Unplug the beverage center before cleaning. If the unit is in a built-in location,  
remove power at the circuit breaker.  
Unplug the beverage center before cleaning. Other parts of the beverage center unit—  
Cleaning  
the inside  
If the unit is in a built-in location, remove  
power at the circuit breaker. Use a slightly  
damp cloth or sponge when cleaning  
around switches, lights or controls.  
including the door gaskets, full extension  
drawers and glass shelves—can be cleaned  
the same way.  
Avoid cleaning cold glass shelves with hot  
Use warm water and baking soda solution— water because the extreme temperature  
about a tablespoon (15 ml) of baking soda  
difference may cause them to break. Handle  
to a quart (1 liter) of water. This both cleans glass shelves carefully. Rough handling of  
and neutralizes odors. Thoroughly rinse and tempered glass can cause it to shatter.  
wipe dry.  
Periodically check the drain hole and  
Drain hole  
Appearance may vary  
channel for any debris. If the drain is  
Drain hole  
blocked, condensation will not drain  
properly.  
To check and clean the drain hole, remove  
the bottom two glass shelves. Sweep a damp  
cloth along the channel in the back of the  
beverage center. Use a finger to sweep away  
any debris from the drain hole.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-In Dimensions  
Beverage Center  
The beverage center can be a free-  
standing model or can be built in using  
the cut-out dimensions below.  
When building in the beverage center,  
be sure to allow for a full door swing so  
you have full access to the pull-out full  
extension drawers.  
Installation  
dimensions  
See the Installation Instructions (Pub. No.  
49-60210) for complete directions.  
233/4  
(603 mm)  
233/4″  
(603 mm)  
341/2″  
(876 mm)  
Product dimensions:  
NOTE:  
Cut-out dimensions:  
Height: 341/2(876 mm) Handle and  
Width: 233/4(603 mm) handle standoff  
Depth: 233/4(603 mm) depth is 13/4″  
Height: 341/2–35(876–889 mm)  
Width: 233/4(603 mm) minimum  
Depth: 24(610 mm)  
The beverage center is factory set for a  
110° door swing.  
Product  
clearances  
10" Minimum  
to Wall  
90° Door Swing  
When installed in a corner:  
21-5/8"  
23-5/8"  
Allow 4minimum clearance on the  
hinge side for the 90° door swing and  
to allow racks to slide out.  
Allow 10minimum clearance on the  
hinge side for a full 110° door swing.  
90°  
The door swing is reversible on all  
models. If desired, change the door swing  
before installation.  
110°  
4" Minimum  
to Wall  
Choose the location:  
Black or Stainless Steel Toekick Options  
These products may be closed in on the  
top and three sides as long as the front  
is unobstructed for air circulation and  
proper access to the door.  
These products are shipped with a black  
toekick installed. An optional stainless  
steel toekick is also supplied with each  
product. For shipping purposes, the  
stainless steel toekick is secured to the  
back of the unit.  
Do not install these products where the  
temperature will go below 55°F (13°C)  
or above 90°F (32°C).  
Do not install where it will be subject to  
direct sunlight, heat or moisture.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reversing the Door Swing  
Beverage Center  
Parts included:  
To reverse  
the door  
Install  
3 Hinge  
Screws  
1. Top left case hinge  
2. Bottom left case hinge  
Remove  
Top Hinge  
3. Left and right side decorative hinge  
cover  
4. Decorative hinge screw hole cover  
®
5. Torx driver bit  
Hinge  
Pin and  
Bracket  
Tools required:  
Door Stop  
and Cam Riser  
1. Phillips screwdriver  
2. Electric drill  
To remove the door:  
1. Flatten the shipping carton to use as  
Remove  
Hinge  
a pad.  
2. Remove the 2 screws and the toekick.  
Set aside the screws and toekick for  
final installation.  
To reinstall the door:  
®
1. Install the original door stop and  
3. Use the supplied Torx bit and electric  
cam riser onto the bottom left side  
of the door.  
drill to remove the 3 screws holding  
the top case hinge. Lift off the hinge.  
(Screws will be used to install the  
new hinge.)  
2. Install the new supplied bottom case  
hinge pin and bracket onto bottom  
left side.  
4. Lift the door off the bottom case  
hinge.  
3. Place the door onto the bottom case  
hinge.  
5. Remove the bottom case hinge pin  
and bracket.  
4. Install the supplied left-hand top case  
hinge with the 3 original screws.  
Rotate the door:  
5. Select the hinge cover marked with  
The handle will be on the right side of the  
door; hinges will be installed on the left  
side of the case.  
1. Remove the doorstop and cam riser  
on the original bottom right side of  
the door.  
an “L”.  
6. Peel backing off the tape inside the  
decorative hinge cover.  
7. Press and snap  
the hinge cover  
into place.  
Install Covers  
2. Remove the fill plug on the top right  
8. Snap the screw  
hole cover into  
place on the  
side of the door.  
3. Turn the door over and reinstall the  
fill plug on the new left side.  
opposite side.  
Important: Check to be sure screws are  
tight and that the door is straight and  
does not sag. The door should swing freely.  
Note: See Installation Instructions to  
apply hinge cover and screw hole cover.  
Position nameplate:  
Apply the Monogram nameplate on the  
door using the template included in the  
installation instructions.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Problem Solver  
Beverage Center  
Newer appliances sound different from older appliances. Modern appliances have more  
features and use newer technology.  
Normal  
operating  
sounds  
Do you hear what I hear? These sounds are normal.  
HUMMM...  
WHOOSH...  
The new high efficiency compressor  
may run faster and longer than your  
old appliance and you may hear a high-  
pitched hum or pulsating sounds while  
it is operating.  
You may hear the fans spinning at  
high speeds. This happens when the  
appliance is first plugged in, when the  
door is opened frequently or when  
large amounts of beverages are added  
to the appliance. The fans help maintain  
desired temperatures.  
Sometimes the appliance runs for an  
extended period, especially when the  
doors are opened frequently.  
If the door is open for over 3 minutes,  
you may hear a fan come on in order  
to cool the appliance.  
You may hear a whooshing sound when  
the doors close. This is due to pressure  
equalizing within the appliance.  
The fans change speeds in order to  
provide optimal cooling and energy savings.  
CLICKS, POPS,  
CRACKS and CHIRPS  
WATER SOUNDS  
You may hear cracking or popping sounds  
when the appliance is first plugged in.  
This happens as the appliance cools to  
the correct temperature.  
The flow of refrigerant through the  
appliance cooling coils may make a  
gurgling noise like boiling water.  
Expansion and contraction of cooling  
coils during and after defrost can cause  
cracking or popping sounds.  
A water dripping noise may occur as  
water from the evaporator flows into the  
drain pan.  
The electronic control board may cause  
a clicking sound when relays activate to  
control appliance components.  
Closing the door may cause a gurgling  
sound due to pressure equalization.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Problem Solver  
Beverage Center  
PROBLEM  
POSSIBLE CAUSE  
Questions?  
Use this  
problem  
solver!  
APPLIANCE  
DOES NOT OPERATE  
• Appliance is so quiet that most of the time you will hear low or no  
operating noise.  
• Appliance may be in defrost cycle when compressor motor does not  
operate for up to 2 hours.  
• If interior light is not on, appliance may not be plugged in at  
wall outlet. Push the plug completely into the wall outlet.  
• The fuse is blown/circuit breaker is tripped. Replace fuse or reset  
the breaker.  
VIBRATION OR  
• Adjust the leveling legs as shown in the Installation Instructions.  
RATTLING (Slight  
vibration is normal.)  
COMPRESSOR  
• Normal when appliance is first plugged in. Wait 24 hours for the  
appliance to completely cool down.  
MOTOR OPERATES  
FOR LONG PERIODS  
OR CYCLES ON AND  
OFF FREQUENTLY  
• Often occurs when large amounts of beverages are placed in appliance.  
This is normal.  
• Door left open or package holding door open.  
• Hot weather or frequent door openings. This is normal.  
Temperature control set at the coldest setting.  
See Temperature Control. Allow 24 hours for temperature to change.  
COMPARTMENT  
TOO WARM  
Temperature control not set cold enough.  
See Temperature Control. Allow 24 hours for temperature to change.  
• Warm weather or frequent door openings.  
• Door left open for long time.  
• Package may be holding door open.  
• Thermistor may be blocked, which can affect the overall temperature.  
The thermistor is located on the right-hand side, just above  
the third shelf.  
APPLIANCE  
HAS ODOR  
• Interior needs cleaning. See Care and Cleaning.  
• Keep open box of baking soda in appliance; replace every 3 months.  
DOOR NOT  
CLOSING  
• Door gasket is sticking or folding over. Apply petroleum jelly  
or paraffin wax to the face of the gasket.  
PROPERLY  
• The door is hitting an internal component inside the appliance.  
Adjust interior components to prevent interference.  
MOISTURE FORMS  
ON OUTSIDE OF  
APPLIANCE  
• Not unusual during periods of high humidity. If bothersome,  
wipe surface dry; otherwise, moisture will evaporate in time.  
• Door left open or package holding door open.  
FROST OR MOISTURE • Too frequent or too long door openings.  
COLLECTS INSIDE  
• In humid weather, air carries moisture into appliance when door  
is opened. Unit will dissipate moisture in time. If bothersome,  
wipe surface dry.  
Temperature control set at coldest setting.  
• Thermistor may be blocked, which can affect the overall temperature.  
The thermistor is located on the right-hand side, just above  
the third shelf.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Problem Solver  
Beverage Center  
PROBLEM  
POSSIBLE CAUSE  
Questions?  
Use this  
problem  
solver!  
INTERIOR LIGHT  
DOES NOT WORK  
• No power at outlet.  
• Light bulb needs replacing. See Care and Cleaning.  
• Controls are set to OFF. Press ON/OFF pad on control panel.  
HOT AIR FROM  
BOTTOM OF  
APPLIANCE  
• Normal air flow cools the motor. In the refrigeration process,  
it is normal that heat be expelled in the area under the appliance.  
Some floor coverings are sensitive and will even discolor at these  
safe and normal temperatures.  
APPLIANCE  
• Adaptive defrost keeps compressor running during door openings.  
This is normal. The appliance will cycle off after the door remains  
closed for two hours.  
NEVER SHUTS OFF  
BUT TEMPERATURES  
ARE OK  
• Normal operation in extreme temperatures.  
TEMPERATURE  
Temperature may be in lockout mode. Press both + and pads for  
WILL NOT ADJUST  
5 seconds to unlock the temperature.  
• Thermistor may be blocked, which can affect the overall temperature.  
The thermistor is located on the right-hand side, just above  
the third shelf.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine or Beverage Storage and Handling Notes  
Beverage Center  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Consumer Services  
Beverage Center  
With the purchase of your new Monogram appliance, receive the  
assurance that if you ever need information or assistance from GE,  
we will be there. All you have to do is call—toll-free!  
Whatever your question about any Monogram major appliance, GE Answer Center®  
information service is available to help. Your call—and your question—will be answered  
promptly and courteously. And you can call any time. GE Answer Center® service is open  
24 hours a day, 7 days a week.  
GE Answer  
Center®  
In the USA:  
800.626.2000  
OR  
Visit our Website at: ge.com  
In Canada, call 1.888.880.3030.  
In-Home Repair  
Service  
A GE consumer service professional will provide expert repair service, scheduled at a time  
that’s convenient for you. Many GE Consumer Service company-operated locations offer  
you service today or tomorrow, or at your convenience (7:00 a.m. to 7:00 p.m. weekdays,  
9:00 a.m. to 2:00 p.m. Saturdays). Our factory-trained technicians know your appliance  
inside and out—so most repairs can be handled in just one visit.  
In the USA:  
800.444.1845  
In Canada:  
1.888.880.3030  
For Customers  
With Special  
Needs…  
GE offers Braille controls for a variety of GE appliances, and a  
brochure to assist in planning a barrier-free kitchen for persons  
with limited mobility.  
Consumers with impaired hearing or speech who have access to a  
TDD or a conventional teletypewriter may call 800.TDD.GEAC  
(800.833.4322) to request information or service.  
In the USA:  
800.626.2000  
Service Contracts  
You can have the secure feeling that GE Consumer Service will still be there after your  
warranty expires. Purchase a GE contract while your warranty is still in effect and you’ll  
receive a substantial discount. With a multiple-year contract, you’re assured of future  
service at today’s prices.  
In the USA:  
800.626.2224  
In Canada:  
1.888.880.3030  
Parts and  
Accessories  
Individuals qualified to service their own appliances can have parts or accessories sent  
directly to their home. The GE parts system provides access to over 47,000 parts…and  
all GE Genuine Renewal Parts are fully warranted. VISA, MasterCard and Discover cards  
are accepted.  
In the USA:  
800.626.2002  
User maintenance instructions contained in this manual cover procedures intended to be  
performed by any user. Other servicing generally should be referred to qualified service  
personnel. Caution must be exercised, since improper servicing may cause unsafe operation.  
In Canada:  
1.888.880.3030  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
Beverage Center  
YOUR MONOGRAM BEVERAGE CENTER WARRANTY  
Staple sales slip or canceled check here. Proof of original purchase  
date is needed to obtain service under warranty.  
LIMITED ONE-YEAR WARRANTY  
WHAT IS  
COVERED  
From the Date  
of the Original  
Purchase  
For one year from date of original purchase, we will provide, free of charge, parts and service labor in your  
home to repair or replace any part of the unit that fails because of a manufacturing defect.  
LIMITED FIVE-YEAR WARRANTY  
For five years from date of original purchase, we will provide, free of charge, parts and service labor  
in your home to repair or replace any part of the sealed refrigerating system (the compressor, condenser,  
evaporator and all connecting tubing) that fails because of a manufacturing defect.  
This warranty is extended to the original purchaser and any succeeding owner for products purchased for  
ordinary home use in the 48 mainland states, Hawaii, Washington, D.C. or Canada. If the product is located  
in an area where service by a GE Authorized Servicer is not available, you may be responsible for a trip  
charge or you may be required to bring the product to an Authorized GE Service location for service. In  
Alaska the warranty is the same except that it is LIMITED because you must pay to ship the product to the  
service shop or for the service technician’s travel costs to your home.  
All warranty service will be provided by our Factory Service Centers or by our authorized Customer Care®  
servicers during normal working hours.  
Should your appliance need service, during warranty period or beyond, in the USA call 800.444.1845. In  
Canada: 888.880.3030. Please have your serial number and model number available when calling for service.  
• Service trips to your home to teach you how  
to use the product.  
• Replacement of house fuses or resetting of circuit  
breakers.  
• Damage to the product caused by accident, fire,  
floods or acts of God.  
• Failure of the product if it is used for other than  
its intended purpose or used commercially.  
• Improper installation, delivery or maintenance.  
WHAT IS NOT  
COVERED  
If you have an installation problem, contact your  
dealer or installer. You are responsible for  
providing adequate electrical, plumbing and  
other connecting facilities.  
• Replacement of the light bulbs, if included.  
• Loss of food due to spoilage (in the USA only).  
• Incidental or consequential damage caused by  
possible defects with this appliance.  
• Damage caused after delivery.  
• Product not accessible to provide required  
service.  
EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product repair as provided in  
this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness  
for a particular purpose, are limited to one year or the shortest period allowed by law.  
Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so  
the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you  
may also have other rights which vary from state to state/province to province. To know what your legal  
rights are in your state/province, consult your local or state/provincial consumer affairs office or your state’s  
Attorney General.  
Warrantor in USA: General Electric Company,  
Louisville, KY 40225  
Warrantor in Canada: Camco Inc.  
GE Consumer & Industrial  
Appliances  
General Electric Company  
Louisville, KY 40225  
ge.com  
197D5891P009  
49-60431  
11-05 JR  
Printed in Slovenia  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Clover Electronics Security Camera RD135H User Manual
Craftsman Air Compressor 919195411 User Manual
Crate Amplifiers Music Mixer CSM12 User Manual
Curtis MP3 Player MPK7836UKA User Manual
Dynacord Speaker DL 94 A User Manual
EdgeStar Beverage Dispenser 866 319 5473 User Manual
Electric Spin Vacuum Cleaner 640090 User Manual
Generac Power Systems Portable Generator 9344 2 User Manual
Genesis Advanced Technologies Grinder GBG800L User Manual
GE Ventilation Hood ZVB36BN User Manual