Eagle Electronics Impact Driver EGA200 User Manual

EAGLE  
Air Tools  
3/8” RATCHET WRENCH  
MODEL EGA200  
OWNERS MANUAL  
1-800-551-2406  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Limited Warranty ...............................................................................................2  
Description.........................................................................................................ꢀ  
Inspection..........................................................................................................ꢀ  
Safety Instructions.............................................................................................ꢀ  
Before Using This Air Tool .................................................................................5  
Operating Instructions .......................................................................................5  
Troubleshooting.................................................................................................5  
Parts Breakdown...............................................................................................6  
Tool Specifications.............................................................................................7  
DESCRIPTION  
Eagle Air tools are manufactured in accordance with our strict specifications and designed  
to be used in light duty professional or serious DIY applications. When used in accordance  
with warnings and instructions given in this manual, and when properly applied and main-  
tained they should give you many years of productive and trouble free service.  
This tool is NOT designed for professional, production or industrial use, when used in these  
applications its life expectancy will be significantly shortened and the warranty will be void.  
INSPECTION  
Upon receipt of your new tool, carefully check for any shipping damage. If your new tool is  
damaged in shipping you need to file a claim with the carrier at once, and before contacting  
Eagle’s customer service department.  
Also carefully check to make sure all accessories (if included) are with the tool. Make sure  
any loose bolts, fittings etc. are tightened before you put this tool into service.  
SAFETY INSTRUCTIONS  
You should operate this air tool only if you have read this entire manual, and understand  
its content, and you are familiar with safety and proper use when operating this equipment.  
This air tool is part of a high pressure compressed air system, the following safety precau-  
tions must be followed at all times.  
Wear hearing protection.  
Wear eye protection.  
Read the instruction manual  
Wear respiratory protection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
1)  
2)  
Always wear protective goggles or safety glasses, hearing protection, protective gloves  
and footwear.  
Air tools can create dust when drilling, grinding, sanding or cutting. This dust can con-  
tain substances known to cause cancer, birth defect, etc. Also wear proper breathing  
protection.  
ꢀ)  
4)  
5)  
6)  
Do not wear loose clothing or jewelry, and ensure long hair is protected with a proper  
cover.  
Do not exceed the maximum operating pressure of this tool or any component in the  
air delivery system.  
Do not depress the trigger when connecting this tool to the air supply system. Always  
disconnect the tool from the air supply system when changing attachments.  
Only use attachments specifically designed for use with air tools. Hand tool sockets  
can shatter and cause serious injury. Do not use worn or damaged attachments. Make  
sure attachments are securely attached to the air tool.  
7)  
8)  
Do not point the air tool at yourself or any other person.  
Never use Oxygen or combustible gases to operate this tool. Use only lubricated com-  
pressed air regulated to the recommended operating pressure for this tool.  
9)  
Disconnect this tool from its air supply before attempting to install or change attach-  
ments or before attempting any service. Also disconnect the air tool from the com-  
pressed air system when not in use.  
10)  
Excessive use of this tool can cause injury due to vibration and fatigue. Do not use this  
tool in awkward positions, and avoid repetitive work motions. When feeling discomfort,  
numbness, fatigue, tingling or pain stop work immediately and seek medical treatment  
and advice.  
11)  
Inspect air hoses, and discard if in worn, weak or damaged condition. Make sure all air  
connections are tight and secure.  
12)  
1ꢀ)  
Keep hands away from moving parts  
Consider working conditions and environment. Do not operate this tool around hazard-  
ous gases or flammable gases. Keep your work area neat and tidy and make sure the  
work area is well lit.  
14)  
Always use clamping devices to hold all work securely in place, never use hands or  
other body parts for holding work. Both hands must be used to operate this air tool,  
enabling control and safety.  
15)  
16)  
17)  
Do not use this air tool if intoxicated, if you are using drugs or medication causing  
drowsiness or if you are tired.  
Do not leave this air tool unattended, and disconnect from the air delivery system when  
not in use. Children must be supervised in the proximity of any air tool or work area.  
Follow air supply manufacturer’s recommendation for connection of regulators, filters  
and other accessories. Do not install quick couplers directly on air tool, it puts unneces-  
sary strain on the air inlet threads, instead install a short length of air hose to the tool.  
Do not over tighten fitting connecting to the air tool; this could cause the housing to  
crack. Use Teflon tape or pipe sealant carefully to prevent excess from entering the air  
tool.  
Wear hearing protection.  
Wear eye protection.  
Read the instruction manual  
Wear respiratory protection.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE USING THIS AIR TOOL  
To ensure long life be sure to oil the tool daily. Pour 4 drops of Eagle air tool (SEA 20 non  
detergent) oil into the air inlet, and then run the tool for a few seconds to clean.  
If tool is an impact wrench fitted with a “Zirc” grease fitting:  
The hammer mechanism of this tool also needs to be greased from time to time (depending  
on usage). The tool is equipped with grease fitting for this purpose; use this connection to  
re-grease the tool using Eagle impact wrench grease.  
PLEASE USE EAGLE SEA 20 NON DETERGENT OIL  
OPERATING INSTRUCTIONS  
This ratchet is designed to speed up productivity, not for high torque applications such as head bolts, lug  
nuts, etc. DO NOT USE THIS RATCHET UNDER POWER TO BREAK FASTENERS LOOSE. Loosen  
fasteners by hand without depressing throttle. Once loose depress throttle. Always perform final torque  
tightening by hand.  
This ratchet is rated to 3/8” bolt size. Rating will decrease for U-bolts, long cap screws, spring fasteners  
and rusted or corroded fasteners. All these factors absorb power and reduce torque capability.  
Use the simplest socket to wrench hook-up. Any additional extensions, U-joints or adapters will absorb  
power and reduce torque capability.  
Forward/Reverse Lever - Select “F” for forward (clockwise) or “R” for reverse (counter clockwise) opera-  
tion. Do not attempt to change direction while tool is running.  
If fastener bogs, slows or binds the tool (or, if the fastener fails to move in 5 seconds), use a large size  
impact wrench with a higher torque rating. Overloading this tool will cause premature wear and/or per-  
manent damage to internal and external drive parts and will void warranty.  
TROUBLESHOOTING  
SYMPTOMS  
CAUSE  
REMEDY  
Air tool does not  
run or runs slow.  
Lack of lubrication.  
Lubricate as per instructions.  
Dirt in tool.  
Clean with mixture of 50/50 tool  
oil/solvent. Lubricate after cleaning.  
Insufficient air pressure.  
Check regulator and air supply for  
leaks. Check compressor to make  
sure it operates at correct pressure.  
Make sure air hose is properly sized  
and that multiple hoses are not  
connected to same outlet. Check air  
hose for leaks and repair.  
Rotor blades worn or motor Replace blades, inspect clean or  
bearing worn or dirty.  
replace bearing.  
IMPACT WRENCH See causes (above).  
does not impact or  
See remedies (above).  
impacts slowly.  
Broken or worn impact  
mechanism.  
Inspect and repair as required.  
Wear hearing protection.  
Wear eye protection.  
Read the instruction manual  
Wear respiratory protection.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS BREAKDOWN  
INDEX  
PART  
DESCRIPTION  
Housing  
QTY  
1
75001  
75002  
7500ꢀ  
75004  
75005  
75006  
86021  
86022  
16012  
75010  
1504ꢀ  
75012  
15041  
75014  
75015  
75016  
75017  
75018  
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
Valve Stem  
Throttle Lever  
O-Ring  
4
5
Trigger Pin  
Air Inlet  
6
7
Spring  
8
Lock Pin  
9
O-Ring  
10  
11  
12  
1ꢀ  
14  
15  
16  
17  
18  
Air Regulator  
Steel Ball  
O-Ring  
Steel Ball  
Inlet Adaptor  
Valve Spring  
Throttle Valve  
Valve Seat  
Plastic Grip  
Wear hearing protection.  
Wear eye protection.  
Read the instruction manual  
Wear respiratory protection.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
20  
21  
22  
2ꢀ  
24  
25  
26  
27  
28  
29  
ꢀ0  
ꢀ1  
ꢀ2  
ꢀꢀ  
ꢀ4  
ꢀ5  
ꢀ6  
ꢀ7  
ꢀ8  
ꢀ9  
40  
41  
42  
4ꢀ  
44  
45  
46  
47  
48  
49  
50  
51  
75019  
75020  
15040  
150ꢀ0  
15029  
150ꢀ1  
15026  
15025  
1524  
O-Ring  
Exhaust Deflector  
Spring  
1
1
2
4
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
2
2
1
1
1
Ball Bearing  
Rear End Plate  
Dowel Pin  
Rotor Blade  
Rotor  
Cylinder  
15027  
15028  
4501ꢀ  
15012  
15014  
15014  
15015  
15016  
1501ꢀ-01  
15020  
15021  
45019  
45021  
45024  
1502ꢀ-01  
450ꢀ8-01  
150ꢀ4  
450ꢀ4  
45052  
45020  
450ꢀ7  
450ꢀ8  
150ꢀ9  
15044  
Front End Plate  
Ball Bearing  
Washer  
Thread Ring Gear  
Plate Gear  
Gear Pin  
Gear Plate  
Clamp Nut  
Bushing  
Needle Bearing  
Crank Shaft  
Ratchet Housing  
Drive Bushing  
Ratchet Yoke  
Reverse Button  
Spring  
Lock Pin  
Washer  
Anvil  
Pin  
Ratchet Pawl  
Thrust Washer  
Retainer Ring  
Spring  
Bolt Capacity ................................................................................................................................................................ꢀ/8”  
Max torque (FT/LBS)......................................................................................................................................................60  
Air pressure (PSI) (Tool in use at full throttle).................................................................................................................90  
Average air consumption (CFM)....................................................................................................................................4.0  
Free speed (RPM)........................................................................................................................................................180  
Air inlet (NPT)...............................................................................................................................................................1/4”  
Hose size (ID)...............................................................................................................................................................ꢀ/8”  
Wear hearing protection.  
Wear eye protection.  
Read the instruction manual  
Wear respiratory protection.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Eagle Air Compressors Ltd.  
manufactures and distributes  
top of the line, high quality  
AIR COMPRESSORS  
AIR COMPRESSOR PARTS  
AIR POWERED ACCESSORIES  
1-800-551-2406  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower 917253724 User Manual
Craftsman Lawn Mower 917377431 User Manual
Crate Amplifiers Musical Instrument Amplifier BV 50H User Manual
Dacor Oven ECD ECS User Manual
Dimplex Indoor Fireplace EF3003 230 User Manual
Dixon Lawn Mower 433616 User Manual
Eagle Electronics SONAR 350 S MAP User Manual
Electro Voice Microphone RE34 User Manual
Fisher Price Plumbing Product T4255 User Manual
Fisher Price Swing Sets BO639 User Manual