QUICK START GUIDE
RegisterÊ yourÊ CTR350Ê
MobileÊ BroadbandÊRouterÊ Today!
CTR350
~ YOU WILL RECEIVE ~
3G Mobile
Broadband
Travel
FREE Technical Support
FREE Firmware Upgrades
New Product Information
Special Offers & Promotions
Also, get a FREE Car Charger!
Router
cradlepoint.com/register
What’s Included In The Box
•
•
•
3G Mobile Broadband Travel Router
AC Power Adapter
Quick Start Guide
Wireless Setup using a Mobile Broadband
(cellular) Data Modem* or Compatible Phone
Connect Power Supply and insert a USB modem or compatible Phone via USB.
Then establish a wireless internet connection as shown below.
Wired Connection using Cable/DSL Internet Service
Connect power and insert one end of your Ethernet cable (not included) to the WAN port. Insert the
other end of the Ethernet cable into your Internet service provider's modem. It may take a minute or
two for the CTR350 to initialize. Open your web browser. You can now access the Internet.
Note: CradlePoint recommends that WiFi security be setup at this point.
See the “Setting WiFi security on your CradlePoint Router” section of this guide.
USB Modem
Power
Supply
or
Power
Supply
Phone
via
USB
Internet
Ethernet
Service (ISP)
Cable
* Mobile Broadband Data Modem not included.
See your Mobile Broadband Service Provider for details.
Modem
Establishing a Wireless Internet Connection
1) Find Your CTR350
Windows XP
Windows Vista
Open CONNECT TO A NETWORK by clicking
the Start button, and then click CONNECT TO.
You'll see a list of the wireless networks
currently available. Click on the CTR-xxx
network, and then click CONNECT.
Mac
Open your computer’s WIRELESS NETWORK
CONNECTION to associate with the router’s Wireless
Access Point. This is typically completed by opening
VIEW AVAILABLE NETWORKS window. After you
have highlighted the CTR-xxx, click CONNECT.
Open your wireless connection list by
clicking the AIRPORT wireless icon
on your menu bar. Click the CTR-xxx.
CTR350
CTR350
CTR350
Port Diagram
2) Connect To the Internet
1) Using either a Windows or Mac platform, open a browser window.
A default CradlePoint page will appear asking for a password.
LEDs
2) The password is the last six digits of the MAC address shown on the box label
LEFT SIDE
and on the bottom of the router. This is a unique number identifying your router.
3) Once you have correctly entered your password, click “OK”.
WLAN
POWER
USB
WAN
You can now access the Internet.
USB
Note: CradlePoint recommends
that WiFi security be setup at
this point. See the “Setting WiFi
Security on your CradlePoint
Router” section of this guide
AIR VENTS
RIGHT SIDE
RESET
WAN POWER
Download from Www.Somanuals.com. All Manuals Search And Download.
|