Nomenclature
●①
●②
●③
●④
●⑤
●⑥
Zoom ring
Zoom position index
Contacts
Lens mount index
Focus mode switch
Focusing ring
EF80-200mm f/4.5-5.6 II
EF Zoom Lenses
EF80-200mm f/4.5-5.6 II
EF75-300mm f/4-5.6 II
EF75-300mm f/4-5.6 III
EF90-300mm f/4.5-5.6
Instructions
Thank you for purchasing a Canon product.
2. Setting the Focus Mode
●❶
●❸
●❹
●❺
To shoot in autofocus (AF) mode, set the focus mode switch
Safety Precautions
❹
to AF
.
1. Do not look at the sun or a bright light source through
the lens or camera. Doing so could result in loss of
vision. Looking at the sun directly through the lens is
especially hazardous.
To shoot in manual focus (MF) mode, set the focus mode
switch to MF, and focus by turning the focusing ring.
• On the EF75-300mm f/4-5.6 II/III and EF90-300mm
f/4.5-5.6 only, the focusing ring is the ring at the front
end of the lens.
2. Whether it is attached to the camera or not, do not
leave the lens under the sun without the lens cap
attached. This is to prevent the lens from concentrating
the sun’s rays, which could cause a fire.
• Do not touch the rotating parts of the lens while A
active.
●❷ - ●Ⓐ
●❷ - ●Ⓑ
• Do not focus in MF when the focus mois set to
AF.
• When the hood (sold separatelinstale EF80-
200mm f/4.5-5.6 II, you can ood djust with
MF.
Handling Cautions
If the lens is taken from a cold environment into a warm
one, condensation may develop on the lens surface and
internal parts. To prevent condensation in this case, first
put the lens into an airtight plastic bag before taking it
from a cold to warm environment. Then take out the lens
after it has warmed gradually. Do the same when taking
the lens from a warm environment into a cold one.
3. Zooming
To zoom, turn the ns’ zoom ri
• Be sure to finish ooming befog. Changing the
zoom ring after cusing can affect he focus.
1. Mounting and Detaching the Lens
See your camera’s instructions for details on mounting
and detaching the lens.
• After detaching the lens, place the lens with the rear end
up to prevent the lens surface and contacts from getting
scratched.
• If the contacts get soiled, scratched, or have fingerprints
on them, corrosion or faulty connections can result. The
camera and lens may not operate properly.
• If the contacts get soiled or have fingerprints on them,
clean them with a soft cloth.
• If you remove the lens, cover it with the dust cap. To
attach it properly, align the lens mount index and the
index of the dust cap, and turn clockwise. To remove it,
reverse the order.
Download from Www.Somanuals.com. All Manuals Search And Download.
|