Camera User Guide
•
•
•
Before use, ure o read this guide, including the
safety prec.
This uide wiiliarize you with how to use the camera
correcly.
Keep the guide handy for future reference.
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary Notes and Legal Information
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
• Always confirm beforehand that memory cards are supported on other devices
such as card readers and computers (including the current version of your
operating system).
Preliminary Notes and Legal
Information
•
•
Take and review some test shots initially to make sure the images were
recorded correctly. Please note thnon nc., its subsidiaries and
affiliates, and its distributors anot ble for any consequential damages
arising from any malfunction amra or accessory, including memory
cards, that results in te failurn image to be recorded or to be
recorded in a way that s machine readable.
Images recorded by the camera are intended for personal use. Refrain from
unauthorized recording that infringes on copyright law, and note that even
for personal use, photography may contravene copyright or other legal
rights at some performances or exhibitions, or in some commercial settings.
The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design
specifications, in rare cases some pixels may be defective or may appear
as red or black dots. This does not indicate camera damage or affect
recorded images.
•
•
•
•
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
When the camera is used over an extended period, it may become warm.
This does not indicate damage.
Download from Www.Somanuals.com. All Manuals Search And Download. 3
Part Names and Conventions in This
Guide
Lens
Speaker
Shuttr utton
er bton
de switch
Mcrophone
Flash
Zoom lever
Shooting: i (telephoto) / j (wide
angle)
Playback: k (magnify) / g ndex)
Lamp
•
•
•
: Important information you should know
: Notes and tips for expert camera use
(p. xx): Pages with related information (in this example, “xx” represents a
page number)
•
•
Instructions in this guide apply to the camera under default settings.
For convenience, all supported memory cards are simply referred to as
“the memory card”.
•
The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Still Images
: Indicates that the function is used when shooting or
viewing still images.
Movies
: Indicates that the function is used when shooting or
viewing movies.
4 Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Conventions in This Guide
Tripod socket
AV OUT (Audio/video output) / DIGITAL
termnal
Movbutton
b (Exosure compensation) / Up button
e (Macro) / Left button
FUNC./SET button
h (Flash) / Right button
l (Display) / Down button
Screen (LCD monitor)
Memory card/battery cover
Indicator
1 (Playback) button
DC coupler cable port
n button
Strap mount
HDMITM terminal
•
•
In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
The following camera buttons are represented by icons.
o
Up button
Left button
on back
on back
on back
on back
on back
q
m FUNC./SET button
r
p
Right button
Down button
•
On-screen text is indicated in brackets.
Download from Www.Somanuals.com. All Manuals Search And Download. 5
Contents
Download from Www.Somanuals.com. All Manuals Search And Download. 7
Contents: Basic Operations
4 Shoot
Shooting people well
I
P
Portraits
Against Snow
Smooth Skin
Matching specific scenes
S
Night Scenes
Low Light
Under Water
Applying special effects
Vivid Colors
Pffect
Fish-Eye Effect
Soft Focus
Miniature Effect
Toy Camera Effect
Monochrome
8 Download from Www.Somanuals.com. All Manuals Search And Download.
Contents: Basic Operations
1 View
z On a TV ...................................................................................... 171
E Shoot/View Movies
c
Print
Save
Download from Www.Somanuals.com. All Manuals Search And Download. 9
Safety Precautions
• Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you
use.
Denotes the possibility of serious injury or death.
Warning
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interioof the product if it has been
dropped or otherwise damaged.
• Stop using the product immediately if it emsmoe, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such aohobenzine, or thinner to clean the
product.
• Do not let the product come nto conith water (e.g. sea water) or other
liquids.
• Do not allow liquids or foreign objcts to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
• Use only the recommended battery.
• Do not place the battery near or in direct flame.
• Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
10Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
• Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on an audio CD player (music player). Additionally, this could damage
the speakers.
Denotes the possibility of injury.
Caution
• When holding the camera by the strap, be careful not to bang it, subject it to
strong impacts or shocks, or let it get caught on other objects.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• Be careful not to subject the screen to song pacts.
If the screen cracks, injury may result from oken ragments.
• When using the flash, be carefuo cver it with your fingers or clothing.
This could result in burns or damagflash.
• Avoid using, placing or soring the product in the following places:
- Places subject to strong sunlig
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
• Viewing images on the camera screen for prolonged periods may cause
discomfort.
Denotes the possibility of damage to the equipment.
Caution
• Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download1. 1
Safety Precautions
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
• Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
• Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
• Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
• Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage treen.
• When putting the camera in your bansuthat hard objects do not come into
contact with the screen.
• Do not attach any hard objecs to thera.
Doing so may cause malfunctionor damagthe screen.
12Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
z Thread the end of the strap through the strap
hole ( ), and then pull the other end of the
strap through the loop on the threaded end
(
).
Holding the Camera
z Place the strap around your wrist.
z When shooting, keep your arms close to your
body and hold the camera securely to
prevent it fromoving. Do not rest your
fingerthe flsh.
Download from Www.Somanuals.com. All Manuals Search And Download1. 3
Initial Preparations
Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
Insert the battery.
z After aligning the S marks on the battery and
charger, insert the battery by pushing it in
(
) and down ( ).
Charge the btery.
z For CB-2Flip out the plug ( ) and plug
the er nto a power outlet ( ).
z For LDE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
CB-2LD
X The charging lamp turns orange and
charging begins.
X When the charging is finished, the lamp turns
green.
CB-2LDE
Remove the battery.
z After unplugging the battery charger, remove
the battery by pushing it in ( ) and up ( ).
14Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Preparations
• To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or
damage to the product.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Specifications” in the Getting Started
guide.
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera (p. 160).
Check the ard’s write-protect tab.
z Recois nopossible on memory cards
a wte-protect tab when the tab is in the
(downward) position. Slide the tab up
unt clicks into the unlocked position.
Open the cover.
z Slide the cover ( ) and open it ( ).
Insert the battery.
z While pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
z Batteries inserted facing the wrong way
cannot be locked into the correct position.
Always confirm that the battery is facing the
right way and locks when inserted.
Terminals
Battery Lock
Download from Www.Somanuals.com. All Manuals Search And Download1. 5
Initial Preparations
Insert the memory card.
z Insert the memory card facing as shown until
it clicks into the locked position.
z Make sure the memory card is facing the right
way when you insert it. Inserting memory
cards facing the wrong way may damage the
camera.
Terminals
Close the cover.
z Lower the cover ( ) and hold it down as you
slide it, until it clicks into the closed position
(
).
Removing the Battery and Memory Card
Remove the bttery.
z Open the er and press the battery lock in
the ion of the arrow.
X The ry will pop up.
Remove the memory card.
z Push the memory card in until it clicks, and
then slowly release it.
X The memory card will pop up.
16Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Preparations
Setting the Date and Time
A screen for setting the date and time is displayed the first time you turn the
camera on. Be sure to specify the date and time, which is the basis for dates
and times added to your images.
Turn the camera on.
z Press the power button.
X The [Date/Time] screen is displayed.
Set the date and time.
z Press the qr buttons to choose an option.
z Press the op buttons to specify the date
and time.
z When finishedpress the m button.
Set the local time zone.
z Press the qr buttons to choose your local
time zone.
Finish the setup process.
z Press the m button when finished. After a
confirmation message, the setting screen is
no longer displayed.
z To turn off the camera, press the power
button.
Download from Www.Somanuals.com. All Manuals Search And Download1. 7
Initial Preparations
• Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose
choose by pressing the op buttons.
in step 2 and then
Changing the Date and Time
Adjust the date and time as follows.
Access the camera menu.
z Press the n button.
Choose [DateTime].
z Move the m levr to choose the 3 tab.
z Pree p buttons to choose [Date/
Timd then press the m button.
Change the date and time.
z Press the n button to close the menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a charged
even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be displayed
18Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Preparations
Display Language
The display language can be changed as needed.
Enter Playback mode.
z Press the 1 button.
Access the setting screen.
z Press and hold the m button, and then
immediately press the n button.
Set the display language.
z Press the opqr buttons to choose a
languand hen press the m button.
X Once tdisplay language has been set, the
g sreen is no longer displayed.
• A clock icon is displayed if you wait too long in step 2 after pressing the m
button before you press the n button. In this case, press the m button to
dismiss the clock icon and repeat step 2.
• You can also change the display language by pressing the n button and
choosing [Language ] on the 3 tab.
Download from Www.Somanuals.com. All Manuals Search And Download1. 9
Still Images
Movies
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or movies,
and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
Turn the camera on.
z Press the power button.
X The startup screen is displayed.
Enter A mode.
z Set the mode switch to A.
z Aim the camera athe subject. As the camera
determinee scne, it will make a slight
clicking n
X Icoreenting the scene and image
stabon mode are displayed in the upper
right of the screen.
X Frames displayed around any subjects that
are detected indicate that they are in focus.
Compose the shot.
z To zoom in and enlarge the subject, move the
zoom lever toward i (telephoto), and to
zoom away from the subject, move it toward
j (wide angle).
20Download from Www.Somanuals.com. All Manuals Search And Download.
Trying the Camera Out
Shoot.
Shooting Still Images
Focus.
z Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
AF Frames
Sh.
z thshutter button all the way down.
X camera shoots, a shutter sound is
played, and in low-light conditions, the flash
fires automatically.
X Keep the camera still until the shutter sound
ends.
X Your shot remains displayed on the screen
for about two seconds.
z Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
Shooting Movies
Start shooting.
z Press the movie button. The camera beeps
once as recording begins, and [ Rec] is
displayed with the elapsed time.
Download from Www.Somanuals.com. All Manuals Search And Download2. 1
Trying the Camera Out
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not
recorded.
Elapsed Time
X Frames displayed around any faces that are
detected indicate that they are in focus.
z Once recording begins, you can take your
finger off the movie button.
Finish shooting.
z Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
X Recording will stop automatically when the
memory card becomes full.
Viewing
After shooting images or movies, yn vw them on the screen as follows.
Enter Playback mode.
z Press the 1 button.
X Your last shot is displayed.
Browse through your images.
z To view the previous image, press the q
button. To view the next image, press the r
button.
22Download from Www.Somanuals.com. All Manuals Search And Download.
Trying the Camera Out
z To access Scroll Display mode, press and
hold the qr buttons for at least one second.
In this mode, press the qr buttons to browse
through images.
z To return to single-image display, press the
m button.
z To browse images grouped by shooting date,
press the op buttons in Scroll Display
mode.
z Movies are identified by a
icon. To play
movies, go to step 3.
Play vie.
z ss tm button, press the op buttons
os
a.
, and then press the m button
z Playback now begins, and after the movie is
finished, is displayed.
z To adjust the volume, press the op buttons
during playback.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
Download from Www.Somanuals.com. All Manuals Search And Download2. 3
Trying the Camera Out
Erasing the Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
Choose an image to erase.
z Press the qr buttons to choose an image.
Erase the image.
z Press the m button, press the op buttons
to choose a, and then press the m button
again.
z After [Erase?] is displayed, press the qr
buttons to choose [Erase], and then press the
m button.
X The current image is now erased.
z To cancel erasur, press the qr buttons to
choose [Cancel]nd then press the m
button.
24Download from Www.Somanuals.com. All Manuals Search And Download.
Included Software, PDF Manuals
The software and PDF manuals on the included CD-ROM are introduced
below, with instructions for installation, saving images to a computer, and
using the PDF manuals.
Features of the Included Software
After installing the software on the CD-ROM, you can do the following things
on your computer.
ImageBrowser EX
z Import images and change camera settings
z Manage images: view, search, and organize
z Print and edit images
z Update to the latest software version with the auto update function
Auto Update Function
Using the included software, you can update to the latest version, and
download new functions via the Internet (somsoftware excluded). Be sure
to install the software on a computer an Iernet connection so you can
use this function.
• Internet access is equirese this function, and any ISP account
charges and acces fees must be paid separately.
• This function may not be available depending on the camera or
region you live in.
PDF Manuals
Installing the software on the CD-ROM will also install the following PDF
manuals on your computer.
Camera User Guide
Once you are familiar with the information in Getting Started, refer to this for a more in-
depth understanding of camera operation.
ImageBrowser EX User Guide
Refer to this guide when using the included software.
This guide can be referenced from the ImageBrowser EX Help function.
• Depending on the country or region where you purchased your camera, the
ImageBrowser EX User Guide may not be accessible from the Help function. In
such cases, it will either be included on the CD-ROM bundled with your camera,
or you can download the latest version from the Canon website.
Download from Www.Somanuals.com. All Manuals Search And Download2. 5
Included Software, PDF Manuals
System Requirements
The included software can be used on the following computers. Adobe
Reader is required to view the PDF manuals.
Windows
Windows 7 SP1
Operating System Windows Vista SP2
Windows XP SP3
Computers running one of the above operating systems
Computer
(preinstalled), with an included USB port and Internet connection
Processor
RAM
Still images: 1.6 GHz or higher, Movies: Core 2 Duo 2.6 GHz or higher
Windows 7 (64 bit): 2 GB or more
Windows 7 (32 bit), Windows Vista (64 bit, 32 bit):
1 GB or more (still images), 2 GB or more (movies)
Windows XP: 512 MB or more (still images), 2 GB or more (movies)
Interfaces
USB
Free Hard Disk
Space
440 MB or more*
1024 x 768 resolutioher
Display
* In Windows XP, Microsoft .NET ramework 3.0 or later (max. 500 MB) must be installed.
Installation may take some time, epnding on computer performance.
Macintosh
Operating System Mac OS X 10.6
Computers running one of the above operating systems
Computer
(preinstalled), with an included USB port and Internet connection
Still images: Core Duo 1.83 GHz or higher, Movies: Core 2 Duo 2.6
GHz or higher
Processor
RAM
1 GB or more (still images), 2 GB or more (movies)
USB
Interfaces
Free Hard Disk
Space
550 MB or more
Display
1024 x 768 resolution or higher
• Check the Canon website for the latest system requirements, including
supported OS versions.
26Download from Www.Somanuals.com. All Manuals Search And Download.
Included Software, PDF Manuals
Installing the Software and PDF Manuals
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Using the software auto update function, you can update to the latest version
and download new functions via the Internet (some software excluded), so be
sure to install the software on a computer with an Internet connection.
Insert the CD-ROM in the
computer’s CD-ROM drive.
z Insert the included CD-ROM (DIGITAL
computer’s CD-ROM drive.
z On a Macintosh computer, after inserting the
disc, double-click the desktop disc icon to
open it, and then double-click the
displayed.
icon
Begie installation.
z [Esy Installation] and follow the on-
instructions to complete the
installation process.
When a message is displayed
prompting you to connect the
camera, connect it to a computer.
z With the camera turned off, open the cover
(
). With the smaller plug of the included
shown, insert the plug fully into the camera
terminal ( ).
Download from Www.Somanuals.com. All Manuals Search And Download2. 7
Included Software, PDF Manuals
z Insert the larger plug of the interface cable in
the computer’s USB port. For details about
USB connections on the computer, refer to
the computer user manual.
Install the files.
z Turn the camera on, and follow the on-screen
instructions to complete the installation
process.
X The software will connect to the Internet to
update to the latest version and download
new functions. Installation may take some
time, depending on computer performance
and the Internet connection.
z Click [Finish] or [estart] on the screen after
installation and rmove the CD-ROM when
the desktdispayed.
z Tucamera off and disconnect the
cab
• When not connected to te Intenet, there are the following limitations.
- The screen in step 3 will not be displayed.
- Some functions may not be installed.
- The first time you connect the camera to the computer, drivers will be installed,
so it may take a few minutes until camera images are accessible.
• If you have several cameras that were bundled with ImageBrowser EX on the
included CD-ROMs, be sure to use each camera with their included CD-ROM
and follow the on-screen installation instructions for each. Doing so will ensure
that each camera will receive the correct updates and new functions via the auto
update function.
28Download from Www.Somanuals.com. All Manuals Search And Download.
Included Software, PDF Manuals
Saving Images to a Computer
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Connect the camera to the
computer.
to a computer.
Turn the camera on to access
CameraWindow.
z Press the 1 button to turn the camera on.
z On a Macintosh computer, CameraWindow is
displayed when a connection is established
between the camera and computer.
z For Windows, ollow the steps introduced
below
z In the een that displays, click the
link
difthe program.
z Choose [Downloads Images From Canon
Camera using Canon CameraWindow] and
then click [OK].
z Double click
.
Download from Www.Somanuals.com. All Manuals Search And Download2. 9
Included Software, PDF Manuals
CameraWindow
Save the images to the computer.
z Click [Import Images from Camera], and then
click [Import Untransferred Images].
X Images are now saved to the Pictures folder
on the computer, in separate folders named
by date.
z After images are saved, close
CameraWindow, press the 1 button to turn
the camera off, and unplug the cable.
z For instructions on viewing images on a
computer, refer to the ImageBrowser EX
User Guide.
• In Windows 7, if the screen in step 2 is not displayed, click the
taskbar.
icon in the
• To start CameraWindow in Windows Vista or XP, click [Downloads Images
From Canon Camera using Canon CameraWindw] on the screen displayed
when you turn the camera on in step 2. If CameWindow is not displayed, click
the [Start] menu and choose [All ProgrX [Cnon Utilities] X
[CameraWindow] X [CameraWindow].
• On a Macintosh computer, if Caindw is not displayed after step 2, click
the [CameraWindow] icon in the he bar at the bottom of the desktop).
• Although you can save iages to a puter simply by connecting your camera
to the computer without sing te included software, the following limitations
apply.
- It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information,
depending on the operating system version, the software in use, or image file
sizes.
- Some functions provided by the included software may not be available, such
as editing movies or returning images to the camera.
30Download from Www.Somanuals.com. All Manuals Search And Download.
Included Software, PDF Manuals
Using the PDF Manuals
Use the included CD-ROM to install the PDF manuals, and a shortcut for the
camera manual will be created on the desktop.
Adobe Reader is required to view the PDF manuals.
• It may not be possible to install the software and PDF manuals on computers
computers, copy the PDF files in the Readme folder on the CD-ROM directly to
a computer capable of using Adobe Reader.
Download from Www.Somanuals.com. All Manuals Search And Download3. 1
Accessories
Included Accessories
Battery Pack
NB-11L*
(with terminal cover)
Battery Charger
CB-2LD/
CB-2LDE*
DIGITAL CAMERA
Solution Disk
Wrist Strap
WS-800
Interface Cable IFC-400PCU*
Memory Card
Card Reader
Windows/
Macintosh
Computer
Power
Cable
HDMI CaC-10
TV/Video
System
AC Adapter Kit
ACK-DC90
AV AVC-DC400
Flash Unit
Case
Canon PictBridge-
Compatible Printers
Waterproof Case
WP-DC330L
High-Power Flash HF-DC2
* Also available for purchase separately.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
32Download from Www.Somanuals.com. All Manuals Search And Download.
On/Off
Shooting Mode
z Press the power button to turn the camera on
and prepare for shooting.
z To turn the camera off, press the power
button again.
Playback Mode
z Press the 1 button to turn the camera on
and view your shots.
z To turn the camera off, press the 1 button
again.
• To switch to Playback mode from Shooting mode, press the 1 button.
• To switch to Shooting mode from Playback mode, press the shutter button
• The lens will be retracted after about one minute once the camera is in Playback
mode. You can turn the camera off when the lenis retracted by pressing the
1 button.
Power-Saving Featu(Auto Power Down)
As a way to conserve batterpowercamera automatically deactivates
the screen and then turns itslf off after a specific period of inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself
off. To activate the screen and prepare for shooting when the screen is off but
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of inactivity.
34Download from Www.Somanuals.com. All Manuals Search And Download.
Shutter Button
To ensure your shots are in focus, always press the shutter button lightly
(halfway) initially. Once the subject is in focus, press the button all the way
down to shoot.
In this manual, shutter button operations are described as pressing the button
halfway or all the way down.
Press halfway. (Press lightly to
focus.)
z Press the shutter button halfway. The camera
beeps twice, and AF frames are displayed
around image areas in focus.
Press all the way down. (From the
halfway position, press fully to shoot.)
X The camera soots, as a shutter sound is
played.
z Keep amera still until the shutter sound
• Images may be ouof focus if you shoot without initially pressing the
shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Shooting Modes
Use the mode switch to access each shooting mode.
Fully automatic shooting, with camera-determined settings (p. 42).
Shoot with optimal settings for specific scenes (p. 78), or take a
variety of shots using your preferred settings (p. 101).
Download from Www.Somanuals.com. All Manuals Search And Download3. 5
Shooting Display Options
Press the p button to view other information on the screen, or to hide the
information. For details on the information displayed, see p. 200.
Information is displayed
No information is displayed
• Screen brightness is automatically increased by the night display function when
you are shooting under low light, making it easier to check how shots are
composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-screen image distortion or jerky
subject motion will not affect recorded images.
36Download from Www.Somanuals.com. All Manuals Search And Download.
FUNC. Menu
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
Access the FUNC. menu.
z Press the m button.
Choose a menu item.
z Press the op buttons to choose a menu
item, and then press the m or r button.
z In some menu items, functions can be
specified simply by pressing the m or r
button, or another screen is displayed for
configuring thfunction.
Options
Chooan option.
Menu Items
z ss top buttons to choose an option.
z s labeled with a
icon can be
cured by pressing the n button.
z To return to the menu items, press the q
button.
Finish the setup process.
z Press the m button.
X The screen before you pressed the m button
in step 1 is displayed again, showing the
option you configured.
• To undo any accidental setting changes, you can restore the camera’s default
Download from Www.Somanuals.com. All Manuals Search And Download3. 7
n Menu
Configure a variety of camera functions through other menus as follows.
Menu items are grouped by purpose on tabs, such as shooting (4), playback
(1), and so on. Note that available settings vary depending on the selected
Access the menu.
z Press the n button.
Choose a tab.
z Move the zoom lever or press the qr buttons
to choose a tab.
Choose a setting.
z Press the op buttons to choose a setting.
z To choose settns with options not shown,
first presm r r button to switch
scres, athen press the op buttons to
sesetting.
Choose an option.
z Press the qr buttons to choose an option.
Finish the setup process.
z
Press the
displayed before you pressed the
button in step 1.
n
button to return to the screen
n
• To undo any accidental setting changes, you can restore the camera’s default
38Download from Www.Somanuals.com. All Manuals Search And Download.
Indicator Display
on the camera status.
Indicator
Status
Color
Camera Status
On
Green
Starting up, recording/reading/transmitting images, or
shooting long exposures (p. 95)
Blinking
• When the indicator blinks green, never turn the camera off, open the
memory card/battery cover, or shake or jolt the camera, which may
corrupt images or damage the camera or memory card.
Clock
You can check the current time.
z Press hold the m button.
X The cunt time appears.
z hod the camera vertically while using
tck function, it will switch to vertical
display. Press the qr buttons to change the
display color.
z
Press the
display.
m
button again to cancel the clock
• When the camera is off, press and hold the m button, then press the power
button to display the clock.
Download from Www.Somanuals.com. All Manuals Search And Download3. 9
40Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Shooting in Smart Auto Mode
For fully automatic selection at optimal settings for specific scenes, simply let
the camera determine the subject and shooting conditions.
Turn the camera on.
z Press the power button.
X The startup screen is displayed.
Enter A mode.
z Set the mode switch to A.
z Aim the camera at the subject. The camera
will make a slight clicking noise as it
determines the scene.
X Icons representing the scene and image
stabilization modare displayed in the upper
X Frames dyed round any detected
subincate that they are in focus.
Cmpose the shot.
z To zoom in and enlarge the subject, move the
zoom lever toward i (telephoto), and to
zoom away from the subject, move it toward
j (wide angle). (A zoom bar showing the
zoom position is displayed.)
Zoom Bar
42Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Smart Auto Mode
Shoot.
Shooting Still Images
Focus.
z Press the shutter button halfway. The camera
beeps twice after focusing, and AF frames
are displayed to indicate image areas in
focus.
z Several AF frames are displayed when
multiple areas are in focus.
AF Frames
St.
z s thshutter button all the way down.
X camera shoots, a shutter sound is
played, and in low-light conditions, the flash
fires automatically.
z Keep the camera still until the shutter sound
ends.
X Your shot remains displayed on the screen
for about two seconds.
z Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
Download from Www.Somanuals.com. All Manuals Search And Download4. 3
Shooting in Smart Auto Mode
Shooting Movies
Start shooting.
z Press the movie button. The camera beeps
once as recording begins, and [ Rec] is
displayed with the elapsed time.
Elapsed Time
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not
recorded.
X Frames displayed around any faces that are
detected indicate that they are in focus.
z Once recording begins, you can take your
finger off the movie button.
Resize the subject and
recompose the shot as needed.
z To resize subjct, do the same thing as in
Honte that the sound of camera
opes will be recorded.
z When you recompose shots, the focus,
brightness, and colors will be automatically
adjusted.
Finish shooting.
z Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
z Recording will stop automatically when the
memory card becomes full.
44Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Smart Auto Mode
Still Images/Movies
• To restore camera sound if you have accidentally deactivated it (by
holding the p button down while turning the camera on), press the
n button and choose [Mute] on the 3 tab, and then press the
qr buttons to choose [Off].
Still Images
• A flashing
icon warns that images are more likely to be blurred
by camera shake. In this case, attach the camera to a tripod or take
other measures to keep it still.
• If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see “Specifications” in the
Getting Started guide.
• The subject may be too close if the camera only beeps once when
you press the shutter button halfway. or details on the focusing
range (shooting range), see “ficatins” in the Getting Started
guide.
• To reduce red-eye and tt in focusing, the lamp may be
activated when sooting i-light conditions.
• A blinking h icon displaed when you attempt to shoot indicates that
shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and press
it again.
• The shutter sound will not be played when the Sleeping and Babies (Sleeping)
icons (p. 47) are displayed.
• The flash firing during shots indicates that the camera has automatically
attempted to ensure optimal colors in the main subject and background (Multi-
area White Balance).
Download from Www.Somanuals.com. All Manuals Search And Download4. 5
Shooting in Smart Auto Mode
Movies
• The camera may become warm when shooting movies repeatedly
over an extended period. This does not indicate damage.
• Keep your fingers away from the
microphone while shooting movies.
Microphone
Blocking the microphone may prevent
audio from being recorded or may cause
the recording to sound muffled.
• Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
• To correct suboptimal image color that may occur in
movie
to stop recording, and then press it again o resume recording.
• Audio recording is monaural.
46Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Smart Auto Mode
Scene Icons
In A mode, shooting scenes determined by the camera are indicated by
the icon displayed, and corresponding settings are automatically selected for
optimal focusing, subject brightness, and color. Depending on the scene,
Background
Normal Backlit
Dark*
Sunsets Spotlights
Subject
People
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
In Motion
Shadows on Face
Smiling
–
Sleeping
Babies
Smiling
Sleeping
Children (In Motion)
Other Subjects
In Motion
–
–
–
–
–
At Close Range
* When using tripod
The background color of icons is light blue when the background is a blue sky, dark
blue when the background is dark, and gray for all other backgrounds.
The background color of icons is light blue when the background is a blue sky, and
gray for all other backgrounds.
Download from Www.Somanuals.com. All Manuals Search And Download4. 7
Shooting in Smart Auto Mode
• The background color of
color of is orange.
,
,
,
, and
is dark blue, and the background
• When shooting movies, only People, Other Subjects, and At Close Range icons will be
displayed.
• When shooting with the self-timer, People (In Motion), Smiling, Sleeping, Babies
(Smiling), Babies (Sleeping), Children, Other Subjects (In Motion) icons will not be
displayed.
• When the drive mode is set to
(p. 109), and when [Hg Lamp Corr.] is set to [On] and
(Sleeping), and Children icons will not be displayed.
• If the flash is set to
, the Backlit icons for Smiling and Children will not be displayed.
• Babies, Babies (Smiling), Babies (Sleeping), and Children icons will be displayed when
[Face ID] is set to [On], and the face of a registered baby (under two years old) or child
time are correct (p. 17).
actual shooting conditions, or if it is not possible to shoot with your
expected effect, color, or brightness.
Continuous Shooting Scenes
If you shoot a still image when the inicons are displayed, the camera
will shoot continuously. If you preshutter button halfway when one of
the icons in the table below s displayone of the following icons will be
displayed to inform you that te cmera will shoot continuous images:
,
, or W.
: Consecutive images are captured, and the camera
analyzes details such as facial expressions to save the
image determined to be the best.
Smiling (including Babies)
: Beautiful shots of sleeping faces, created by
combining consecutive shots to reduce camera shake and
Sleeping (including Babies) image noise.
The AF assist beam will not light up, the flash will not fire,
and the shutter sound will not be played.
W: So you don’t miss a photo opportunity of children who
move around, the camera will capture three consecutive
images for each shot.
Children
48Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Smart Auto Mode
• In some scenes, expected images may not be saved, and images
may not look as expected.
• Focus, image brightness, and color are determined by the first shot.
• When you want to shoot single images only, press the m button, choose
in the menu, and then choose
.
Image Stabilization Icons
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in A
mode.
Image stabilization for movies,
Image stabilization for still
images
reducing strong camera shake,
as when shooting while walking
(Dynamic IS)
Image stabilization for subtle
camera shake, such as when
shooting movies at telephoto
(Powered IS)
Image stabilization for still
images, when panning*
No image stabilization, because
the camera is mounted on a
tripod or held still by other means
Image stabilization fr maro
shots (Hybrid IS)
* Displayed when you pan, following moving subjects with the camera. When you follow
subjects moving horizontally, image stabilization only counteracts vertical camera
shake, and horizontal stabilization stops. Similarly, when you follow subjects moving
vertically, image stabilization only counteracts horizontal camera shake.
icon is not displayed.
Download from Www.Somanuals.com. All Manuals Search And Download4. 9
Shooting in Smart Auto Mode
On-Screen Frames
A variety of frames are displayed once the camera detects subjects you are
aiming the camera at.
•
A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame
will remain on the screen.
•
When you are pressing the shutter button halfway and the camera detects
subject movement, a blue frame is displayed, and the focus and image
brightness are constantly adjusted (Servo AF).
are not displayed around desired subjects, or if frames are displayed
on the background or similar areas.
50Download from Www.Somanuals.com. All Manuals Search And Download.
Common, Convenient Features
Still Images
Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom, use
digital zoom for up to about 20x enlargement.
Move the zoom lever toward i.
z Hold the lever until zooming stops.
X Zooming stops at the largest possible zoom
factor (where the image is not noticeably
grainy), which is displayed when you release
the zoom lever.
Zoom Factor
Move the zoom lever toward i
again.
X The camera zoms in even closer on the
subject.
• Moving the zoom lever will display the zoom bar (which indicates the
zoom position). The color of the zoom bar will change depending on
the zoom range.
- White range: optical zoom range where the image will not appear
grainy.
- Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).
-
Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution
following step 1.
• Focal length when optical and digital zoom are combined is as follows (35mm
film equivalentt).
24 – 480 mm (24 – 120 mm with optical zoom alone)
• To deactivate digital zoom, press the n button, choose [Digital Zoom] on
the 4 tab, and then choose [Off].
Download from Www.Somanuals.com. All Manuals Search And Download5. 1
Common, Convenient Features
Still Images
Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
Configure the setting.
z Press the m button, choose
in the menu,
X Once the setting is complete, ] is displayed.
Sh
z FoStill Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
z For Movies: Press the movie button.
X Once you start the self-timer, the lamp will
blink and the camera will play a self-timer
sound.
X Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
z To cancel shooting after you have triggered
the self-timer, press the n button.
z To restore the original setting, choose
in
step 1.
52Download from Www.Somanuals.com. All Manuals Search And Download.
Common, Convenient Features
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
Configure the setting.
X Once the setting is complete, [ is displayed.
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
Cho$.
the n button.
Configure the setting.
z Press the op buttons to choose [Delay] or
[Shots].
z Press the qr buttons to choose a value, and
then press the m button.
X Once the setting is complete, $ is displayed.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
• When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the flash
fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will remain
lit in case the flash fires.)
Download from Www.Somanuals.com. All Manuals Search And Download5. 3
Common, Convenient Features
Still Images
Deactivating the Flash
Prepare the camera for shooting without the flash as follows.
Configure the setting.
z Press the r button, press the qr buttons to
choose !, and then press the m button.
X Once the setting is complete, ! is displayed.
z To restore the original setting, repeat this
process but choose
.
• If a flashing
icon is displd wn you press the shutter button
halfway in low-light conditiounthe camera on a tripod or take
other measures to keep it stil
54Download from Www.Somanuals.com. All Manuals Search And Download.
Common, Convenient Features
Still Images
Adding the Shooting Date and Time
The camera can add the shooting date and time to images in the lower-right
corner. However, note that these cannot be removed. Confirm beforehand
Configure the setting.
z Press the n button, choose [Date
Stamp] on the 4 tab, and then choose the
X Once the setting is complete, [DATE] is
displayed.
t.
X As you take shots, the camera adds the
shooting date or time to the lower-right corner
of images.
z To restore the original setting, choose [Off] in
step 1.
• Images originally recorded without the date and time can be printed with this
information as follows. However, adding the date and time to images that
already have this information may cause it to be printed twice.
- Use the included software to print
For details, refer to the ImageBrowser EX User Guide.
Download from Www.Somanuals.com. All Manuals Search And Download5. 5
Common, Convenient Features
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
Specify Tracking AF.
z Press the o button.
X
is displayed in the center of the screen.
Choose a subject to focus on.
z Aim the camera so that
is on the desired
subject, and then press the shutter button
halfway.
X A blue frame is displayed, and the camera will
keep the subject n focus and image
brightnesjusted (Servo AF).
Sh.
z Preshutter button all the way down to
shoot.
z Press the o button to cancel Tracking AF.
• Tracking may not be possible when subjects are too small or move too rapidly,
or when subject color or brightness matches that of the background too closely.
56Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Using Face ID
If you register a person ahead of time, the camera will detect that person’s
face, and prioritize focus, brightness, and color for that person when shooting.
In A mode, the camera can detect babies and children based on
registered birthdays and optimize settings for them when shooting.
This function is also useful when searching for a specific registered person
Personal Information
•
Information such as images of a face (face info) registered with Face ID,
and personal information (name, birthday) will be saved on the camera.
Additionally, when registered people are detected, their names will be
recorded in still images. When using the Face ID function, be careful when
sharing the camera or images with others, and when posting images online
where many others can view them.
•
When disposing of a camera or transferring it to another person after using
Face ID, be sure to erase all information (registered faces, names, and
Registering Face ID Inrmation
You can register information (fa, name, birthday) for up to 12 people to
use with Face ID.
Access the setting screen.
z Press the n button, choose [Face ID
Settings] on the 4 tab, and then press the
Download from Www.Somanuals.com. All Manuals Search And Download5. 7
Using Face ID
z Choose [Add to Registry], and then choose
[Add a New Face].
Register face information.
z Aim the camera sthat the face of the person
you want gisteis inside the gray frame
at tntof the screen.
z A wame on the person’s face indicates
that thface is recognized. Make sure a white
frame is displayed on the face, and then
shoot.
z If the face is not recognized, you cannot
register face information.
Save the settings.
z After [Register?] is displayed, press the qr
buttons to choose [OK], and then press the
m button.
58Download from Www.Somanuals.com. All Manuals Search And Download.
Using Face ID
X The [Edit Profile] screen is displayed.
Enter a name.
z Press the m button.
z Press the opqr buttons to choose a
character, and then press the m button to
enter it.
z Up to 10 characters can be used.
z Choose
move the cursor.
z Choose ad press the m button to
or
and press the m button to
deletprevous character.
z ss tn button to return to the edit
sceen.
Enter a birthday.
z Press the op buttons to choose [Birthday],
and then press the m button.
z Press the qr buttons to choose an item.
z Press the op buttons to specify the date
and time.
z When finished, press the m button.
Save the settings.
z Press the op buttons to choose [Save], and
then press the m button.
z After a message is displayed, press the qr
buttons to choose [Yes], and then press the
m button.
Download from Www.Somanuals.com. All Manuals Search And Download5. 9
Using Face ID
Continue registering face
information.
z To register up to 4 more points of face
information (expressions or angles), repeat
steps 2 – 3.
z Registered faces are more easily recognized
if you add a variety of face information. In
addition to a head on angle, add a slight side
angle, a shot when smiling, and shots inside
and outside.
• The flash will not fire when following step 2.
• If you do not register a birthday in step 5, Babies or Children icons
• You can overwrite registered face info, and ad ce info later if you have not
filled all 5 face info slots (p. 63).
60Download from Www.Somanuals.com. All Manuals Search And Download.
Using Face ID
Shooting
If you register a person ahead of time, the camera will prioritize that person
as the main subject, and optimize focus, brightness, and color for that person
when shooting.
X When you point the camera toward a subject,
the names of up to 3 registered people will be
displayed when they are detected.
z Shoot.
X Displayed names will be recorded in still
images. Even if people are detected, but their
names are not displayed, the names (up to 5
people) will be recorded in the image.
• People other than those registered may be mistakenly detected as
the registered person if they share simar facial features.
• Registered people may not be correetecteif the captured image or scene
differs drastically from the red ce information.
• If a registered face is not deor not easily detected, overwrite registered
information with new face infoistering face info right before shooting will
allow for easier detecion oregistered faces.
• If a person is mistakenly detected as another person and you continue shooting,
you can edit or erase the name recorded in the image during playback (p. 129).
• Because faces of babies and children change quickly as they grow, you should
update their face info regularly (p. 63).
recorded in the image.
• If you don’t want names to be recorded in still images, choose [Face ID Settings]
on the 4 tab, choose [Face ID], and then choose [Off].
• You can check names recorded in images in the playback screen (simple
information display) (p. 122).
Download from Www.Somanuals.com. All Manuals Search And Download6. 1
Using Face ID
Checking and Editing Registered Information
Checking Registered Face ID Information
Access the [Check/Edit Info]
screen.
Edit Info] and press the m button.
Choose a person to check.
z Press the opqr buttons to choose a
person, and then press the m button.
Chthregistered information.
z Presop buttons to choose an item,
anthen press the m button.
z Check the registered information.
Changing the Name or Birthday
Access the [Edit Profile] screen.
Profile] and press the m button.
62Download from Www.Somanuals.com. All Manuals Search And Download.
Using Face ID
Input changes.
z Press the op buttons to choose an item,
changes.
• Even if you change names in [Edit Profile], the names recorded in
previously shot images will remain the same.
• You can check and erase registered face information by choosing [Face Info
List] on the screen in step 3.
• You can use the included software to edit registered names. Some characters
entered with the included software may not display on the camera, but will be
correctly recorded in images.
Overwriting and Adding Face Information
You can overwrite existing face inforn witnew face info. You should
update face information regularlyspelly with babies and children, as their
faces change quickly as they g
You can also add face inormatien all 5 face info slots have not been
filled.
Access the [Add Face Info] screen.
Face Info] and press the m button.
Choose the name of the person to
overwrite.
z Press the opqr buttons to choose the
name of a person to overwrite, and then press
the m button.
z If 4 or less face information slots are
face info.
Download from Www.Somanuals.com. All Manuals Search And Download6. 3
Using Face ID
Access the face info screen.
z Read the message that displays, press the
qr buttons to choose [OK], and then press
the m button.
z The face info screen is displayed.
Choose the face info to overwrite.
z Press the opqr buttons to choose the face
info to overwrite, and then press the m
button.
Register face information.
register tw fae information.
z Rered aces are more easily recognized
if ya variety of face information. In
additito a head on angle, add a slight side
anle, a shot when smiling, and shots inside
and outside.
• You cannot add face information if all 5 information slots are filled. Follow the
steps above to overwrite face information.
• You can follow the above steps to register new face info when there is at least one
slot open, however you cannot overwrite any face information. Instead of
overwriting face info, first erase unwanted existing info (p. 64), and then register
new face information (p. 57) as needed.
Erasing Face Information
Access the [Check/Edit Info]
screen.
Edit Info] and press the m button.
64Download from Www.Somanuals.com. All Manuals Search And Download.
Using Face ID
Choose the name of the person
whose face info you want to erase.
z Press the opqr buttons to choose the
name of the person whose face info you want
to erase, and then press the m button.
Access the [Face Info List] screen.
z Press the op buttons to choose [Face Info
List], and then press the m button.
Choose the face info to erase.
z Press the m utton, press the opqr
buttonchooe the face info you want to
e, d then press the m button.
z Erase?] is displayed, press the qr
buns to choose [OK], and then press the
m button.
z The selected face info will be erased.
Erasing Registered Information
You can erase information (face info, name, birthday) registered to Face ID.
However, names recorded in previously shot images will not be erased.
Access the [Erase Info] screen.
Info].
Download from Www.Somanuals.com. All Manuals Search And Download6. 5
Using Face ID
Choose the name of the person
whose info you want to erase.
z Press the opqr buttons to choose the
name of a person to erase, and then press
the m button.
z After [Erase?] is displayed, press the qr
buttons to choose [OK], and then press the
m button.
• If you erase a registered person’s info, you will not be able to display
66Download from Www.Somanuals.com. All Manuals Search And Download.
Image Customization Features
Still Images
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
Configure the setting.
z Press the m button, choose
in the menu,
X Once the setting is complete, the screen
aspect ratio will be updated.
z To restore the original setting, repeat this
process but choose
.
Same aspect ratio as HDTVs, used fplay owidescreen HDTVs or similar
display devices.
Same aspect ratio as 35 mm fild for printing images at 5 x 7-inch or postcard
sizes.
Native aspect ratio of the camera screen, used for printing images at 3.5 x 5-inch
or A-series sizes.
Square aspect ratio.
• At aspect ratios other than
Zoom] is set to [Off]).
• Zooming is not possible during movie recording at aspect ratios other than
.
Download from Www.Somanuals.com. All Manuals Search And Download6. 7
Image Customization Features
Still Images
Changing Image Resolution (Size)
Choose from 4 levels of image resolution, as follows. For guidelines on how
many shots at each resolution setting can fit on a memory card, see
“Specifications” in the Getting Started guide.
Configure the setting.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
z To restore the original setting, repeat this
process but choose
.
Guidelines for Choosing lution Based on Paper Size
(for 4:3 Images)
A2 (16.5 x 23.4 in.)
z
: For e-mailing images.
A3 – A5 (11.7 x 16.5
– 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
68Download from Www.Somanuals.com. All Manuals Search And Download.
Image Customization Features
Still Images
Red-Eye Correction
Red-eye that occurs in the flash photography can be automatically corrected
as follows.
Access the [Flash Settings]
screen.
z Press the n button, choose [Flash
Settings] on the 4 tab, and then press the
figure the setting.
z Ce [Red-Eye Corr.], and then choose
X Once the setting is complete, R is displayed.
z To restore the original setting, repeat this
process but choose [Off].
• Red-eye correction may be applied to image areas other than eyes
(if the camera misinterprets red eye makeup as red pupils, for
example).
• You can also access the screen in step 2 by pressing the r button and then the
n button.
Download from Www.Somanuals.com. All Manuals Search And Download6. 9
Image Customization Features
Still Images
Correcting Greenish Image Areas from
Mercury Lamps
In shots of evening scenes with subjects illuminated by mercury lamps, the
subjects or background may appear to have a greenish tinge. This greenish
tinge can be corrected automatically when shooting, using Multi-area White
Balance.
Configure the setting.
z Press the n button, choose [Hg Lamp
Corr.] on the 4 tab, and then choose [On]
X Once the setting is complete,
is
displayed.
z To restore the oriinal setting, repeat this
process bhooe [Off].
• After you are finished shooting under mercury lamps, you should set
[Hg Lamp Corr.] back to [Off]. Otherwise, green hues not caused by
mercury lamps may be corrected by mistake.
• Try taking some test shots first, to make sure you obtain the desired results.
70Download from Www.Somanuals.com. All Manuals Search And Download.
Image Customization Features
Movies
Changing Movie Image Quality
3 image quality settings are available. For guidelines on the maximum movie
length at each level of image quality that will fit on a memory card, see
“Specifications” in the Getting Started guide.
Configure the setting.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
z To restore the original setting, repeat this
process but choose
.
Image
Quality
Resolution
Frate
Details
1920 x 1080
1280 x 720
640 x 480
24 fps
30 fps
30 fps
For shooting in Full HD
For shooting in HD
For shooting in standard definition
• In
and
modes, black bars displayed on the top and bottom edges of the
screen indicate image areas not recorded.
Download from Www.Somanuals.com. All Manuals Search And Download7. 1
Helpful Shooting Features
Still Images
Movies
Displaying Grid Lines
Grid lines can be displayed on the screen for vertical and horizontal reference
while shooting.
Configure the setting.
z Press the n button, choose [Grid Lines]
X Once the setting is complete, grid lines are
displayed on the screen.
z To restore the original setting, repeat this
process but choose [Off].
• Grid lines are not recorded in yts.
72Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Shooting Features
Still Images
Magnifying the Area in Focus
You can check the focus by pressing the shutter button halfway to enlarge the
image area in the AF frame.
Configure the setting.
z Press the n button, choose [AF-Point
Zoom] on the 4 tab, and then choose [On]
ck the focus.
z Pthe shutter button halfway. The face
detected as the main subject is now
magnified.
z To restore the original setting, choose [Off] in
step 1.
• The display will not magnify if a face was not detected, or if the
person is too close to the camera and their face is too large for the
screen.
a TV as a display (p. 171).
Download from Www.Somanuals.com. All Manuals Search And Download7. 3
Helpful Shooting Features
Still Images
Checking for Closed Eyes
is displayed when the camera detects that people may have closed their
eyes.
Choose
.
z Press the m button, choose
and choose
in the menu,
.
Courthe setting.
z Presn button, choose [Blink
Deection] on the 4 tab, and then choose
Shoot.
X A frame, accompanied by
, is displayed
when the camera detects a person whose
eyes are closed.
z To restore the original setting, choose [Off] in
step 2.
• When you have specified multiple shots in $ mode, this function is only
available for the final shot.
74Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Customizing Camera Operation
Customize shooting functions on the 4 tab of the menu as follows.
Deactivating the AF Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
Configure the setting.
z Press the n button, choose [AF-assist
Beam] on the 4 tab, and then choose [Off]
z To restore the original setting, repeat this
process but choose [On].
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduclamp that lights up to reduce red-
eye when the flash is used in lot sots.
Access the [Flash Settings]
screen.
z Press the n button, choose [Flash
Settings] on the 4 tab, and then press the
Configure the setting.
z Choose [Red-Eye Lamp], and then choose
z To restore the original setting, repeat this
process but choose [On].
Download from Www.Somanuals.com. All Manuals Search And Download7. 5
Customizing Camera Operation
Changing the Image Display Period After Shots
Change how long images are displayed after shots as follows.
Configure the setting.
z Press the n button, choose [Review] on
the 4 tab, and then choose the desired
option (p. 38).
z To restore the original setting, repeat this
process but choose [2 sec.].
2 – 10 sec. Displays images for the specified time.
Displays images until you press the
shutter button halfway.
Hold
Off
No image display after shots.
Changing the Image Disy Style After Shots
Change the way images are displafteshots as follows.
Configure the setting.
z Press the n button, choose [Review Info]
on the 4 tab, and then choose the desired
option (p. 38).
z To restore the original setting, repeat this
process but choose [Off].
Off
Displays only the image.
Detailed
Displays shooting details (p. 202).
Shows the area in the AF frame
magnified, enabling you to check the
focus. Follow the steps in “Checking
Focus Check
76Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Specific Scenes
Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
Enter 4 mode.
z Set the mode switch to 4.
Choose a shooting mode.
z Press the m button, choose G in the menu,
Shoot.
Still Iages
Movies
I Shpotraits (Portrait)
z Taks of people with a softening effect.
Still Images
Shoot evening scenes without
using a tripod (Handheld
NightScene)
z Beautiful shots of evening scenes, created by
combining consecutive shots to reduce
camera shake and image noise.
z When using a tripod, shoot in A mode
78Download from Www.Somanuals.com. All Manuals Search And Download.
Specific Scenes
Still Images
Shoot under low light (Low Light)
z Shoot with minimal camera shake and
subject blur even in low-light conditions.
Still Images
Movies
S Shoot under water (Underwater)
z Natural-colored shots of sea life and
underwater scenery, when you use an
z This mode can correct white balance and
match the effect of using a commercially
ill Images
Movies
P Shooith snowy backgrounds
w
z B, natural-colored shots of people
against snowy backgrounds.
• Because the camera will shoot continuously in
steady while shooting.
• In mode, shooting conditions that cause excessive camera shake
mode, hold it
or similar issues may prevent the camera from combining images,
and you may not be able to obtain the expected results.
• In
increased to suit the shooting conditions.
•
mode resolution is
(2304 x 1728) and cannot be changed.
Download from Www.Somanuals.com. All Manuals Search And Download7. 9
Specific Scenes
Still Images
Movies
Correcting White Balance
can match the effect of using a commercially available color-compensating
filter.
Choose S.
Choose white balance.
z Press the m button, choose
and press the m button again.
in the menu,
Adjust seting.
z Moe zom lever to adjust the correction
levand A, and then press the m
butto
• The camera will retain white balance correction levels even if you
switch to another white balance option in step 2, but correction levels
will be reset if you record custom white balance data.
• B represents blue and A, amber.
• White balance can also be manually corrected by recording custom white
80Download from Www.Somanuals.com. All Manuals Search And Download.
Specific Scenes
Still Images
Making Skin Look Smoother (Smooth Skin)
You can apply a smoothening effect when shooting images of people. The
effect level and color ([Lighter Skin Tone], [Darker Skin Tone]) can be chosen
as follows.
Choose
.
.
Access the setting screen.
z Press the p button.
Configure the setting.
z Press the op buttons to choose an item.
Choose the eect level by pressing the qr
buttons, and ten press the m button.
X A pres shwn of how your shot will look
the effect applied.
t.
• Areas other than people’s skin may be modified.
• Try taking some test shots first to make sure you obtain the desired
results.
• The effect will be stronger for the face of the person detected as the main
subject.
Download from Www.Somanuals.com. All Manuals Search And Download8. 1
Still Images
Movies
Applying Special Effects
Add a variety of effects to images when shooting.
Choose a shooting mode.
shooting mode.
Shoot.
• In
,
,
,
,
, and
modes, try taking some test shots
first, to make sure you obtain the desired results.
Still Images
Movies
Shoot in vivid colors (Super Vivid)
z Shots in rich, vvicolors.
Still Images
Movies
Posterized shots (Poster Effect)
z Shots that resemble an old poster or
illustration.
82Download from Www.Somanuals.com. All Manuals Search And Download.
Applying Special Effects
Still Images
Shooting with a Fish-Eye Lens Effect
(Fish-eye Effect)
Shoot with the distorting effect of a fish-eye lens.
Choose
.
.
Choose an effect level.
z Press the p button, press the qr buttons to
choose an effect level, and then press the m
button.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
Download from Www.Somanuals.com. All Manuals Search And Download8. 3
Applying Special Effects
Still Images
Movies
Shots Resembling Miniature Models
(Miniature Effect)
Creates the effect of a miniature model, by blurring image areas above and
below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and
objects in the scene will move quickly during playback. Note that sound is not
recorded.
Choose
.
X A white frame is displayed, indicating the
image area that will not be blurred.
.
Choose the aea to keep in focus.
z Press the utton
z Moe zom lever to resize the frame, and
preop buttons to move it.
For movies, choose the movie
playback speed.
z Press the n button, and then press the
qr buttons to choose the speed.
Return to the shooting screen and
shoot.
z Press the n button to return to the
shooting screen, and then shoot.
84Download from Www.Somanuals.com. All Manuals Search And Download.
Applying Special Effects
Playback Speed and Estimated Playback Time (for One-
Minute Clips)
Speed
Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
• The zoom is not available when shooting movies. Be sure to set the
zoom before shooting.
• To switch the orientation of the frame to vertical, press the qr buttons in step
2. To move the frame, press the qr buttons again. To return the frame to
horizontal orientation, press the op buttons.
• Holding the camera vertically will change the orientation of the frame.
• Movie image quality is
at an aspect rao
and
at an aspect ratio of
Still Images
Shooting with a Toamera Effect
(Toy Camera Effect)
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
Choose
.
.
Choose a color tone.
z Press the p button, press the qr buttons to
choose a color tone, and then press the m
button.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
Download from Www.Somanuals.com. All Manuals Search And Download8. 5
Applying Special Effects
Standard Shots resemble toy camera images.
Warm
Cool
Images have a warmer tone than with [Standard].
Images have a cooler tone than with [Standard].
Still Images
Shooting With a Soft Focus Effect
This function allows you to shoot images as if a soft focus filter is attached to
the camera. You can adjust the effect level as desired.
Choose
.
.
Choose an effect level.
z Press the p buttn, press the qr buttons to
choose an effect lvel, and then press the m
button.
X A pw ishown of how your shot will look
witffect applied.
Shoot.
86Download from Www.Somanuals.com. All Manuals Search And Download.
Applying Special Effects
Still Images
Movies
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
Choose
.
.
Choose a color tone.
z Press the p button, press the qr buttons to
choose a color tone, and then press the m
button.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
B/W
Black and white shots.
Sepia
Blue
Sepia tone shots.
Blue and white hots.
Download from Www.Somanuals.com. All Manuals Search And Download8. 7
Applying Special Effects
Still Images
Movies
Shooting with Color Accent
Choose a single image color to keep and change other colors to black and
white.
Choose T.
Access the setting screen.
z Press the p button.
X The original image and the Color Accent
image are displayed one after another.
X By default, green is the color that will be kept.
Specify the color.
z Position the cenframe over the color to
keep, ann pres the q button.
X Thcifid color is recorded.
Spethe range of colors to keep.
z Prss the op buttons to adjust the range.
z To keep only your specified color, choose a
Recorded Color
large negative value. To keep colors similar
to your specified color as well, choose a large
positive value.
z Press the m button to return to the shooting
screen.
• Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
88Download from Www.Somanuals.com. All Manuals Search And Download.
Applying Special Effects
Still Images
Movies
Shooting with Color Swap
You can replace one image color with another before shooting. Note that only
one color can be replaced.
Choose Y.
Access the setting screen.
z Press the p button.
X The original image and the Color Swap
image dispayed one after another.
X By def, green will be replaced with gray.
Specify the color to replace.
z Position the center frame over the color to
replace, and then press the q button.
X The specified color is recorded.
Download from Www.Somanuals.com. All Manuals Search And Download8. 9
Applying Special Effects
Specify the new color.
z Position the center frame over the new color,
and then press the r button.
X The specified color is recorded.
Specify the range of colors to
replace.
z Press the op buttons to adjust the range.
z To replace only your specified color, choose
a large negative value. To replace colors
similar to your specified color as well, choose
a large positive value.
z Press the m button to return to the shooting
screen.
• Using the flash in this mode may cause uexpected results.
• In some shooting scenes, images look grainy and colors may
not look as expected.
90Download from Www.Somanuals.com. All Manuals Search And Download.
Special Modes for Other Purposes
Still Images
Movies
Auto Clip Recording (Movie Digest)
You can make a short movie of a day just by shooting still images.
Before each shot, the camera will automatically record a movie clip of the
scene. Each clip recorded that day is combined into a single file.
Choose
.
.
Shoot.
z To shoot a still image, press the shutter
button all the way down.
X Before shooting, the camera will
automatically record a clip about 2 – 4
seconds long
• Clips may not be recorded if yooot a till image immediately after
turning the camera on, csing
in other ways.
mode, or operating the camera
• Battery life is shoer in thiode than in A mode, because clips
are recorded for ech sot.
• Any sounds from camera operations during movie recording will be
included in the movie.
• Movies created in
• Clips are saved as separate movie files in the following cases even if they were
recorded on the same day in mode.
mode are saved as iFrame movies (p. 100).
- If the movie file size reaches about 4 GB or the total recording time reaches
approx. 30 minutes
• Some camera sounds will be muted. Sounds are not played when you press the
shutter button halfway, use camera controls, or trigger the self-timer (p. 157).
• Movies created in
mode can be viewed by date (p. 128).
Download from Www.Somanuals.com. All Manuals Search And Download9. 1
Special Modes for Other Purposes
Still Images
Auto Shooting After Face Detection
(Smart Shutter)
Auto Shooting After Smile Detection
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
Choose
.
and then press the p button.
z Press the qr buttons to choose
then press the m button.
X The camera now enters shooting standby
,
, and
mode, and [Smile Detection on] is displayed.
Aim the mera at a person.
z Eame e camera detects a smile, it will
shor the lamp lights up.
z To pae smile detection, press the q button.
Prss the q button again to resume
detection.
• Switch to another mode when you finish shooting, or the camera will
continue shooting each time a smile is detected.
• You can also shoot as usual by pressing the shutter button.
• The camera can detect smiles more easily when subjects face the camera and
open their mouth wide enough so that teeth are visible.
• To change the number of shots, press the op buttons after choosing
in
92Download from Www.Somanuals.com. All Manuals Search And Download.
Special Modes for Other Purposes
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
Choose
.
and then press the p button.
z Press the qr buttons to choose
then press the m button.
,
, and
Compose the shot and press the
shutter button halfway.
z Make sure a green frame is displayed around
the face of thperson who will wink.
Prese sutter button all the way
dwn
X mera now enters shooting standby
me, and [Wink to take picture] is displayed.
X The lamp blinks and the self-timer sound is
played.
Face the camera and wink.
X The camera will shoot about two seconds
after detecting a wink by the person whose
face is inside the frame.
z To cancel shooting after you have triggered
the self-timer, press the n button.
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
• Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the op buttons after choosing
in
• If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
Download from Www.Somanuals.com. All Manuals Search And Download9. 3
Special Modes for Other Purposes
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
shots.
Choose
.
and then press the p button.
z Press the qr buttons to choose
then press the m button.
,
, and
Compose the shot and press the
shutter button halfway.
z Make sure a greeframe is displayed around
the face ocus on and white frames
aroothfaces.
Prehe shutter button all the way
down.
X The camera now enters shooting standby
mode, and [Look straight at camera to start
count down] is displayed.
X The lamp blinks and the self-timer sound is
played.
Join the subjects in the shooting
area and look at the camera.
X After the camera detects a new face, the
lamp blinking and self-timer sound will speed
up. (When the flash fires, the lamp will remain
lit.) About two seconds later, the camera will
shoot.
z To cancel shooting after you have triggered
the self-timer, press the n button.
94Download from Www.Somanuals.com. All Manuals Search And Download.
Special Modes for Other Purposes
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the op buttons after choosing
in
Still Images
Shooting Long Exposures (Long Shutter)
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this case,
mount the camera on a tripod or take other measures to prevent camera shake.
Choose N.
Choothe shutter speed.
z the o button, press the qr buttons to
ce the shutter speed, and then press the
m button.
Check the exposure.
z Press the shutter button halfway to view the
exposure for your selected shutter speed.
Shoot.
• On-screen image brightness in step 3, when you pressed the shutter
button halfway, may not match the brightness of your shots.
•
With shutter speeds of 1.3 seconds or slower, there will be a delay before
you can shoot again, as the camera processes images to reduce noise.
• Set [IS Mode] to [Off] when using a tripod or other means to hold the
• If the flash fires, your shot may be overexposed. In this case, set the flash to !
and shoot again.
Download from Www.Somanuals.com. All Manuals Search And Download9. 5
Special Modes for Other Purposes
Still Images
High-Speed Continuous Shooting
(High-speed Burst)
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
“Specifications” in the Getting Started guide.
Choose
.
.
Shoot.
X Hold the shutter button all the way down to
shoot continuously.
• The resolution is
(2304 x 1728) and cannot e changed.
• Focus, image brightness, and color are dtermid by the first shot.
• Shooting may stop momentarily or cons shoting may slow down
depending on shooting conditiomesettings, and the zoom position.
• As more shots are taken, shootslow down.
recorded will be determied in the first shot, and will be recorded in the same
place for further shots.
Images Displayed During Playback
Each set of images shot continuously is managed as a single group, and only
the first image in that group will be displayed. To indicate that the image is
part of a group,
is displayed in the upper left of the screen.
also erased. Be careful when erasing images.
96Download from Www.Somanuals.com. All Manuals Search And Download.
Special Modes for Other Purposes
• Grouped images can be viewed individually when played back using Image
ungrouped.
Download from Www.Somanuals.com. All Manuals Search And Download9. 7
Special Modes for Other Purposes
Still Images
Shooting Stitch Assist Images
Shoot a large subject by taking multiple shots at various positions, and then
use the included software to combine them into a panorama.
Choose x or v.
v.
Take the first shot.
X The first shot will determine the exposure and
white balance.
Take aonashots.
z Coe te second shot so that it partially
ovehe image area of first shot.
z Minor misalignment of overlapping portions
wil be corrected automatically when the
images are combined.
z Take up to 26 shots, the same way you took
the second shot.
Finish shooting.
z Press the m button.
Use the software to combine the
images.
z For instructions on merging images, refer to
the ImageBrowser EX User Guide.
• This function is not available when using a TV as a display while shooting
98Download from Www.Somanuals.com. All Manuals Search And Download.
Movies
Shooting Various Movies
Shooting Super Slow Motion Movies
You can shoot fast-moving subjects for playback later in slow motion.
Note that sound is not recorded.
Choose
.
.
Choose a frame rate.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
Shoot.
z Press movie button.
X r shwing the elapsed time is displayed.
um clip length is approx. 30 sec.
z To stop movie recording, press the movie
button again.
Playback Time
Image Quality
Frame Rate
(For a 30-sec. Clip)
240 fps
120 fps
(320x240)
(640x480)
Approx. 4 min.
Approx. 2 min.
• Zooming is not available during recording, even if you move the zoom
lever.
• Focus, exposure, and color are determined when you press the
movie button.
• The movie will be played back in slow motion when you follow steps 1 – 3 on
• You can change the playback speed of movies shot in
mode by using the
included software. For details, refer to the ImageBrowser EX User Guide.
Download from Www.Somanuals.com. All Manuals Search And Download9. 9
Shooting Various Movies
Shooting iFrame Movies
Shoot movies that can be edited with iFrame-compatible software or devices.
You can quickly edit, save, and manage iFrame movies using the included
software.
Choose
.
.
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not
recorded.
Shoot.
z Press the movie button.
z To stop movie recording, press the movie
button again.
• The resolution is
• iFrame is a video format developby Ae.
10D0ownload from Www.Somanuals.com. All Manuals Search And Download.
4
G mode
More discerning shots, in your preferred shooting style
•
Instructions in this chapter apply to the camera in G mode, with the mode
switch set to 4.
•
•
G: Program AE; AE: Auto Exposure
Before using a function introduced in this chapter in modes other than G,
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 1
Still Images
Movies
Shooting in Program AE Mode (G Mode)
You can customize many function settings to suit your preferred shooting
style.
Enter G mode.
Customize the settings as desired
(pp. 103 – 119), and then shoot.
• If adequate exposure cannot be obtained when you press the shutter button
halfway, shutter speeds and aperture values are displayed in orange. To obtain
adequate exposure, try adjusting the following settings.
• Movies can be recorded in G mode as well, by essing the movie button.
However, some H and n settings my e automatically adjusted for
movie recording.
• For details on the shooting range in G msee “Specifications” in the Getting
Started guide.
10D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Image Brightness
(Exposure Compensation)
Still Images
Movies
Adjusting Image Brightness
(Exposure Compensation)
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –2 to +2.
z
Press the
o
button. As you watch the screen,
press the qr buttons to adjust the brightness.
z When shooting movies, shoot with the
exposure compensation bar displayed.
When shooting still images, press the m
button to display the set exposure
compensation amount, and then shoot.
Exposure Compensation Bar
• You can also shoot still images with exposucompensation bar displayed.
• While recording a movie, & is disd, and he exposure is locked.
Still Images
Movies
Locking Image Briness/Exposure (AE Lock)
Before shooting, you can lock he exposure, or you can specify focus and
exposure separately.
Lock the exposure.
z Aim the camera at the subject to shoot with
the exposure locked. With the shutter button
pressed halfway, press the o button.
X & is displayed, and the exposure is locked.
z To unlock AE, release the shutter button and
press the o button again. In this case, & is
no longer displayed.
Compose the shot and shoot.
• AE: Auto Exposure
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 3
Image Brightness (Exposure Compensation)
Still Images
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
For typical shooting conditions, including backlit shots.
Automatically adjusts exposure to match the shooting conditions.
Evaluative
Determines the average brightnesof light across the entire image
area, calculated by treatinrightnss in the central area as more
important.
Center
Weighted Avg.
Metering restrictehin he
displayed n the cethe screen.
(Spot AE Point frame),
Spot
Still Images
Changing the ISO Speed
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
Automatically adjusts the ISO speed to suit the shooting mode and
conditions.
For shooting outdoors in fair weather.
Low
For shooting in cloudy conditions, or at twilight.
High
For shooting night scenes, or in dark rooms.
10D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Image Brightness (Exposure Compensation)
• To view the automatically set ISO speed when the camera is set to
, press
the shutter button halfway.
• Although choosing a lower ISO speed may reduce image graininess, there may
be a greater risk of subject blurriness in some shooting conditions.
• Choosing a higher ISO speed will increase shutter speed, which may reduce
subject blurriness and increase the flash range. However, shots may look
grainy.
Still Images
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness. Insufficient overall image contrast can also be automatically
corrected before shooting to make subjects stand out better.
z Press the n button, choose [i-Contrast]
X Once ettinis complete, @ is displayed.
• Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 5
Color and Continuous Shooting
Still Images
Movies
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
Automatically sets the optimal white balance for the shooting
conditions.
Auto
Day Light
Cloudy
For shooting outdoors in fair weher.
For shooting in cloudy tionsin the shade, or at twilight.
For shooting undiny incandescent (tungsten) lighting
and similarly coorescent lighting.
Tungsten
For shoong under warm-white, cool-white, and similarly colored
fluorescenlighing.
Fluorescent
For shooting under daylight fluorescent and similarly colored
fluorescent lighting.
Fluorescent H
Custom
For manually setting a custom white balance (p. 107).
10D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Color and Continuous Shooting
Custom White Balance
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white balance
under the same light source that will illuminate your shot.
(p. 106) to choose
.
z Aim the camera at a plain white subject, so
that the entire screen is white. Press the
n button.
X The tint of the screen changes once the white
balance data has been recorded.
• Colors may look unnatural if you change camera settings after
recording white balance data.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 7
Color and Continuous Shooting
Still Images
Movies
Changing Image Color Tones (My Colors)
Change image color tones as desired, such as converting images to sepia or
black and white.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
My Colors Off
Vivid
–
Emphasizes contrast and color saturation, making images
sharper.
Tones down contraand cor saturation for subdued
images.
Neutral
Sepia
B/W
Creates see iages.
Creates blawhite images.
Combines he effects of Vivid Blue, Vivid Green, and Vivid
Red to produce intense yet natural-looking colors
resembling images on positive film.
Positive Film
Lighter Skin Tone
Darker Skin Tone
Lightens skin tones.
Darkens skin tones.
Emphasizes blues in images. Makes the sky, ocean, and
other blue subjects more vivid.
Vivid Blue
Emphasizes greens in images. Makes mountains, foliage,
and other green subjects more vivid.
Vivid Green
Vivid Red
Emphasizes reds in images. Makes red subjects more vivid.
Adjust contrast, sharpness, color saturation, and other
qualities as desired (p. 109).
Custom Color
or
modes.
• With and modes, colors other than people’s skin tone may be
modified. These settings may not produce the expected results with
some skin tones.
10D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Color and Continuous Shooting
Custom Color
Choose the desired level of image contrast, sharpness, color saturation, red,
green, blue, and skin tones in a range of 1 – 5.
Access the setting screen.
Tones (My Colors)” (p. 108) to choose
,
and then press the n button.
Configure the setting.
z Press the op buttons to choose an option,
and then press the qr buttons to specify the
value.
z For stronger/more intense effects (or darker
skin tones), ajust the value to the right, and
for weaker/lger effects (or lighter skin
tonesust te value to the left.
z ss tn button to complete the
.
Still Images
Continuous Shooting
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Specifications” in the
Getting Started guide.
Configure the setting.
z Press the m button, choose
in the menu,
X Once the setting is complete, W is displayed.
Shoot.
X Hold the shutter button all the way down to
shoot continuously.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 9
Shooting Range and Focusing
• During continuous shooting, focus and exposure are locked at the
position/level determined when you pressed the shutter button
halfway.
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
the location where it is displayed in the first shot. Even if the subject moves, the
name will stay fixed in the same position for any subsequent shots.
Shooting Range and Focusing
Still Images
Shooting Close-ups aco)
To restrict the focus to subjects at cange, set the camera to e. For
details on the focusing rangsee “Specifications” in the Getting Started
guide.
z Press the q button, press the qr buttons to
choose e, and then press the m button.
X Once the setting is complete, e is displayed.
• If the flash fires, vignetting may occur.
• In the yellow bar display area below the zoom bar, e will turn gray
and the camera will not focus.
• To prevent camera shake, try mounting the camera on a tripod and shooting
11D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Shooting Range and Focusing
Still Images
Shooting Distant Subjects (Infinity)
To restrict the focus to distant subjects, set the camera to u. For details on
the focusing range, see “Specifications” in the Getting Started guide.
z Press the q button, press the qr buttons to
choose u, and then press the m button.
X Once the setting is complete, u is displayed.
Still Images
Movies
Digital Tele-Converter
The focal length of the lens can be incsed y approximately 1.6x or 2.0x.
This can reduce camera shake becauhe shutter speed is faster than it
would be if you zoomed (includindigital zoom) in to the same zoom
factor.
z Press the n button, choose [Digital
Zoom] on the 4 tab, and then choose the
X The view is enlarged and the zoom factor is
displayed on the screen.
• The digital tele-converter is only available when the aspect ratio is
.
• The respective focal lengths when using [1.6x] and [2.0x] are 38.4 – 192 mm
and 48.0 – 240 mm (35mm film equivalent).
• The shutter speed may be equivalent when you move the zoom lever all the way
toward i for maximum telephoto, and when you zoom in to enlarge the subject
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 1
Shooting Range and Focusing
Still Images
Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
z Press the n button, choose [AF Frame]
on the 4 tab, and then choose the desired
Still Images
Movies
Face AiAF
•
•
Detects people’s faces, and then sets the focu, exposure (evaluative
metering only), and white balance ( ly).
After you aim the camera at the subjecthite frame is displayed around
the person’s face determined by mra to be the main subject, and up
to two gray frames are displayed d other detected faces.
When the camera detects movement, frames will follow moving subjects,
within a certain range.
•
•
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
11D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Shooting Range and Focusing
• If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the
areas in focus when you press the shutter button halfway.
AF frame is displayed in the center of the screen when you press the
shutter button halfway.
• Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in profile, at an angle, or partly hidden
• The camera may misinterpret non-human subjects as faces.
• No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focas fllows.
ose [Tracking AF].
Mode” (p. 112) to choose [Tracking AF].
X
is displayed in the center of the screen.
Choose a subject to focus on.
z Aim the camera so that
is on the desired
subject, and then press the q button.
X When the subject is detected, the camera
beeps and
is displayed. Even if the
subject moves, the camera will continue to
track the subject within a certain range.
X If no subject is detected,
is displayed.
z To cancel tracking, press the q button again.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 3
Shooting Range and Focusing
Shoot.
z Press the shutter button halfway.
changes to a blue
, which follows the
subject as the camera continues to adjust the
z Press the shutter button all the way down to
shoot.
X Even after your shot,
is still displayed and
the camera continues to track the subject.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
• [AF-Point Zoom] on the 4 tab is not available.
• e and u are not available.
• The camera can detect subjects een if press the shutter button halfway
without pressing the q button. Aur hot,
the screen.
is displayed in the center of
• If [Face ID] is set to [Onnames wot display when registered people are
name will display if the subject chosen to focus on is the same as a person
detected with Face ID.
Still Images
Movies
Center
One AF frame is displayed in the center. Effective for reliable focusing.
• A yellow AF frame is displayed with if the camera cannot focus
when you press the shutter button halfway. Note that AF-point
• To reduce the AF frame size, press the n button and set [AF Frame Size]
• If [Face ID] is set to [On], names will not display when registered people are
detected, but the names will be recorded in the still images (p. 57).
11D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Shooting Range and Focusing
Still Images
Recomposing Shots While the Focus is Locked
As long as you keep the shutter button pressed halfway, the focus and
exposure are locked. You can recompose shots as needed before shooting.
This feature is called Focus Lock.
Focus.
z Aim the camera so that the subject is
centered, and then press the shutter button
halfway.
z Confirm that the AF frame displayed around
the subject is green.
Recompose the shot.
z Keeping the sutter button pressed halfway,
move the camra to recompose the shot.
Soo
z the shutter button all the way down.
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long as
you press the shutter button halfway.
Configure the setting.
z Press the n button, choose [Servo AF]
Focus.
z The focus and exposure are maintained
where the blue AF frame is displayed while
you are pressing the shutter button halfway.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 5
Shooting Range and Focusing
• Focusing may not be possible in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
• If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
• AF lock shooting is not available.
• [AF-Point Zoom] on the 4 tab is not available.
Still Images
Movies
Shooting with the AF Lock
The focus can be locked. After you lock the focuthe focal position will not
change even when you release your fingom te shutter button.
Loe ocus.
z With tshutter button pressed halfway,
prss the q button.
X The focus is now locked, and % is
displayed.
z To unlock the focus, release the shutter
button and press the q button again. In this
case, % is no longer displayed.
Compose the shot and shoot.
11D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Flash
Activating Flash
You can have the flash fire for each shot. For details on the flash range, see
“Flash Range” (see “Specifications” in the Getting Started guide).
z Press the r button, press the qr buttons to
choose h, and then press the m button.
X Once the setting is complete, h is displayed.
Shooting with Slow Synchro
With this option, the flash fires to increase the brightness of the main subject
(such as people) while the camera shoots at a low shutter speed to increase
the brightness of the background that ut of te flash range.
For details on the flash range, slasRange” (see “Specifications” in the
Getting Started guide).
Configure the setting.
z Press the r button, press the qr buttons to
choose Z, and then press the m button.
X Once the setting is complete, Z is displayed.
Shoot.
z Even after the flash fires, ensure that the
main subject does not move until the shutter
sound is finished playing.
• Mount the camera on a tripod or take other measures to keep it still
and prevent camera shake. In this case, set [IS Mode] to [Off]
(p. 119).
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 7
Flash
Shooting with the FE Lock
shots.
Lock the flash exposure.
z Aim the camera at the subject to shoot with
the exposure locked. With the shutter button
pressed halfway, press the o button.
X The flash fires, and when ( is displayed, the
flash output level is retained.
z To unlock FE, release the shutter button and
press the o button again. In this case, ( is
no longer dispayd.
Compohe shot and shoot.
• FE: Flash Exposure
11D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Other Settings
Still Images
Changing the Compression Ratio
(Image Quality)
Choose from two compression ratios, as follows:
(Super Fine),
(Fine).
For guidelines on how many shots at each compression ratio can fit on a
memory card, see “Specifications” in the Getting Started guide.
Configure the setting.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
till Images
Movies
Changing the IS Mode ttings
ss the setting screen.
z Pres the n button, choose [IS Settings]
on the 4 tab, and then press the m button
Configure the setting.
z Choose [IS Mode], and then choose the
Optimal image stabilization for the
Continuous shooting conditions is automatically
applied (Intelligent IS) (p. 49).
Shoot
Only*
Image stabilization is active only at the
moment of shooting.
Off
Deactivates image stabilization.
* The setting is changed to [Continuous] for movie
recording.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 9
Other Settings
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this case,
set [IS Mode] to [Off].
Movies
Deactivating Powered IS
Powered IS reduces slow camera shake that may occur when recording
telephoto movies. However, this option may not produce the expected results
when used for the stronger camera shake that may occur when shooting
while walking or when moving the camera to match subject movement. In this
case, set Powered IS to [Off].
Settings” (p. 119) to access the [IS Settings]
screen.
z Choose [PowereIS], and then choose [Off]
• [Powered IS] settings are not lied when [IS Mode] is set to [Off].
12D0ownload from Www.Somanuals.com. All Manuals Search And Download.
5
Playback Mode
Have fun reviewing your shots, and browse or edit them
in many ways
•
To prepare the camera for tperations, press the 1 button to enter
Playback mode.
• It may not be possible to play back or edit images that were renamed
or already edited on a computer, or images from other cameras.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d2. 1
Still Images
Movies
Viewing
After shooting images or movies, you can view them on the screen as follows.
Enter Playback mode.
z Press the 1 button.
X Your last shot is displayed.
Browse through your images.
z To view the previous image, press the q
button. To view the next image, press the r
button.
z To as Scroll Display mode, press and
hod the qr buttons for at least one second.
In this mode, press the qr buttons to browse
through images.
z To return to single-image display, press the
m button.
z To browse images grouped by shooting date,
press the op buttons in Scroll Display
mode.
z Movies are identified by a
icon. To
play movies, go to step 3.
12D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Viewing
Play movies.
z To start playback, press the m button, press
the op buttons to choose
press the m button again.
, and then
Adjust the volume.
z Press the op buttons to adjust the volume.
Pause playback.
z To pause playback, press the m button. The
movie control panel is displayed. To resume
playback, press the qr buttons to choose
, and then press the m button.
X After the movie is finished,
displayed.
is
• To switch to Shooting mode from Playback ode, press the shutter button
halfway.
• To deactivate Scroll Display, press n button, choose [Scroll Display]
on the 1 tab, and then choose [Of
• For playback from the last iiewed, press the n button, choose
[Resume] on the 1 tabanLast seen].
•
To change the transiton shown een images, press the
n
button, choose
[Transition] on the
1
ab, ad then press the qr buttons to choose the effect.
Still Images
Checking People Detected in Face ID
Switch to simple information
display mode and check.
z Press the p button repeatedly until simple
information display is activated, and then
press the qr buttons to choose an image.
X Names will be displayed on detected people.
•
If you do not want names to display on images shot using Face ID, press the
n
button, choose [Face ID Info] on the tab, and then set [Name Display] to [Off].
1
Download from Www.Somanuals.com. All Manuals Search And Downloa1d2. 3
Viewing
Still Images
Movies
Switching Display Modes
Press the p button to view other information on the screen, or to hide the
information. For details on the information displayed, see p. 202.
No information is
displayed
Simple
Information
Display
Detailed
Information
Display
Enables you to
check the focus
*Not shown for movies.
• Switching display modes by pressing the p buttois also possible immediately
after you shoot, while your shot is displayd. Hoever, simple information
display is not available. To change the disply mode, press the n
Overexposure Warnng (fage Highlights)
Washed-out highlights in the mage flash on the screen in detailed information
display.
Histogram
z The graph in detailed information display is a
histogram showing the distribution of
brightness in the image. The horizontal axis
represents the degree of brightness, and the
vertical axis, how much of the image is at
each level of brightness. Viewing the
High
Low
Dark
Bright
histogram is a way to check exposure.
12D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Viewing
Still Images
Checking the Focus
To check the focus of your shots, you can magnify the area of the image that
was in the AF frame at the time of shooting.
Access Focus Check.
X A white frame is displayed where the AF
frame was when the focus was set.
X Gray frames are displayed over faces
detected later, in Playback mode.
X The portion of the image in the orange frame
is magnified.
Switch frames.
z Move the zoolever toward k once.
X The sn at let is displayed.
z witcto a different frame when there are
e frames, press the m button.
Zoom in or out, or view other image
areas.
z As you examine the focus, use the zoom
lever to zoom in or out. Press the opqr
buttons to adjust the display position.
z Press the n button to restore the original
display in step 1.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d2. 5
Browsing and Filtering Images
Still Images
Movies
Navigating Through Images in an Index
By displaying multiple images in an index, you can quickly find the images you
are looking for.
Display images in an index.
z Move the zoom lever toward g to display
images in an index. Moving the lever again
will increase the number of images shown.
z To display fewer images, move the zoom
lever toward k. Fewer images are shown
each time you move the lever.
Choose an image.
z Press the opqbuttons to choose an
image.
X An orangme is displayed around the
selimge.
z Prem button to view the selected
image single-image display.
Still Images
Movies
Searching for Images
When looking for images on a memory card containing many images, you can
specify search conditions to display specific images only. You can also
Name
Displays images of a registered person (p. 57).
Displays images tagged as favorites (p. 144).
Displays the images shot on a specific date.
Displays the images of a specific category (p. 145).
Favorites
Shot Date
My Category
;
Displays still images, movies, or movies shot in
mode.
Still Image/Movie
12D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Browsing and Filtering Images
Choose a search condition.
z Press the m button, choose
in the menu,
View the image search results.
z Choose the type of images to view by
pressing the opqr buttons, and then press
the m button. (Except when searching
images by
.)
X Images matching the search conditions will
display inside a yellow frame.
z Press the qr buttons to view image search
result
z Coos
in step 1 to cancel image search.
• When the camera has foo corresponding images for a search
condition, those sarch conditions will not be available.
“Magnifying Images” (p. 131). You can protect, erase, or print all images in a
search result at once by choosing “Select All Images in Search” in “Protecting
(p. 148), a message is displayed and image search ends.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d2. 7
Browsing and Filtering Images
Movies
Viewing Movie Digest Movies
Movies created in
Choose a movie.
z Press the m button, choose
in the menu,
Play the movie.
z Press the m button to start playback.
Still Images
Viewing Individual Images in a Group
Grouped images shot in
but they can also be viewed individually.
Che an image group.
z Presqr buttons to choose an image
laeled
.
Choose
.
z Press the m button, and then choose
in
12D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Editing Face ID Information
View individual images in the
group.
z Pressing the qr buttons will display only
images in the group.
z To cancel group playback, press the m
button, choose
in the menu, and press
• During group playback (step 3), you can use the menu functions accessed by
pressing the m button. You can also browse through images quickly
(“Magnifying Images” (p. 131)). You can protect, erase, or print all images in a
group at once by choosing “All Images in Group” in “Protecting Images” (p. 135),
• To ungroup images so that you can view them individually, press the n
However, grouped images cannot be unroued during individual playback.
Still Images
Editing Face ID ormation
If you notice that a name s incrrect during playback, you can change it or
erase it.
However, you cannot add names for people who are not detected by Face ID
(names are not displayed), and for people whose names have been erased.
Changing Names
Access the setting screen.
z Press the n button and choose [Face ID
z Press the op buttons to choose [Edit ID
Info], and then press the m button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d2. 9
Editing Face ID Information
Choose an image.
image, and then press the m button.
z An orange frame is displayed around the
selected face. When multiple names are
displayed in an image, press the qr buttons
to choose the name to change, and press the
m button.
Choose the item to edit.
z Press the opqr buttons to choose
[Overwrite], and then press the m button.
Choose the name of the person to
change.
the persou want to change.
Erasing Names
z ChoErase] on the screen in step 3
above, and press the m button.
z After [Erase?] is displayed, press the qr
buttons to choose [OK], and then press the
m button.
13D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Image Viewing Options
Still Images
Magnifying Images
Magnify an image.
z Moving the zoom lever toward k will zoom in
and magnify the image, and is
displayed. You can magnify images up to
about 10x by continuing to hold the zoom
lever.
z To zoom out, move the zoom lever toward
g. You can return to single-image display
by continuing to hold it.
Move the display position and
switch images as needed.
Approximate Position of
Displayed Area
z To move the dsplay position, press the
opquttos.
z While
is displayed, you can switch to
bpressing the m button. To switch
ter images while zoomed, press the qr
buttons. Press the m button again to restore
the original setting.
• You can return to single-image display from magnified display by pressing the
n button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 1
Image Viewing Options
Still Images
Movies
Viewing Slideshows
Automatically play back images from a memory card as follows. Each image
is displayed for about three seconds.
Choose a slideshow transition and
start playback.
z Press the m button, choose . in the menu,
X The slideshow will start a few seconds after
[Loading image...] is displayed.
z Press the n button to stop the
slideshow.
slideshows.
• To pause or resume slideshowss thm button.
• You can switch to other images playback by pressing the qr buttons.
For fast-forward or fast-wind, hoe qr buttons down.
played.
13D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Image Viewing Options
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image. Choose from six
transition effects between images.
Access the setting screen.
z Press the n button and choose
Configure the settings.
z Choose a menu item to configure, and then
z To start the slideshow with your settings,
choose [Start] and press the m button.
z To return to the menu screen, press the
n button
• [Play Time] cannot be mofied hen [Bubble] is chosen in [Effect].
Still Images
Auto Playback of Similar Images
(Smart Shuffle)
Based on the current image, the camera offers four images similar to it that
you may wish to view. After you choose to view one of those images, the
camera offers four more images. This is an enjoyable way to play back
images in an unexpected order. Try this feature after you have taken many
shots, in many kinds of scenes.
Choose Smart Shuffle.
z Press the m button, and then choose
in
X Four candidate images are displayed.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 3
Image Viewing Options
Choose an image.
z Press the opqr buttons to choose the
image you want to view next.
X Your chosen image is displayed in the center,
surrounded by the next four candidate
images.
z For full-screen display of the center image,
press the m button. To restore the original
display, press the m button again.
z Press the n button to restore single-
image display.
• Only still images shot with this camera are played back using Smart
Shuffle.
• [Smart Shuffle] is not available in the following cases:
- There are less than 50 shots taken with his camera
- An unsupported image is currentisplaed
13D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Protecting Images
Protect important images to prevent accidental erasure by the camera
(p. 139).
z Press the m button, and then choose : in
z To cancel protection, repeat this process and
choose : again, and then press the m
button.
• Protected images on a memory card will be erased if you format the
• Protected images cannot be erased by the camera. To erase them, cancel
protection settings first.
Using the Menu
ss the setting screen.
z Press the n button, and then choose
Choose a selection method.
z Choose a menu item and a setting as desired
z To return to the menu screen, press the
n button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 5
Protecting Images
Choosing Images Individually
Choose [Select].
and press the m button.
Choose an image.
z Press the qr buttons to choose an image,
and then press the m button.
displayed.
is
z To cancel protection, press the m button
again. is no longer displayed.
z Repeat this process to specify other images.
Protect the images.
z Press the n button. A confirmation
message is displed.
z Press the buttons to choose [OK], and
thess he m button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
13D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Protecting Images
Selecting a Range
Choose [Select Range].
Range] and press the m button.
Choose a starting image.
z Press the m button.
z Press the qr buttons to choose an image,
and then press the m button.
Choose an ending image.
z Press the r button to choose [Last image],
and then press the m button.
z Press the qr buttons to choose an image,
and then press the m button.
z Images before the first image cannot be
selected as the last image.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 7
Protecting Images
Protect the images.
z Press the p button to choose [Protect], and
then press the m button.
Specifying All Images at Once
Choose [Select All Images].
Images] and press the m button.
Protect the images.
z Press the op bttons to choose [Protect],
and then press tm button.
• To cancel protection for grupof images, choose [Unlock] in step 4 of
“Selecting a Range” or in step 2 of “Specifying All Images at Once”.
13D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
Choose an image to erase.
z Press the qr buttons to choose an image.
Erase the image.
z Press the m button, and then choose a in
z After [Erase?] is displayed, press the qr
buttons to choose [Erase], and then press the
m button.
X The current image is now erased.
z To cancel erasure, press the qr buttons to
choose [Cancel], and then press the m
button.
Erasing All Image
You can erase all images at onccareful when erasing images, because
Choosing a Selection Method
Access the setting screen.
z Press the n button, and then choose
Choose a selection method.
z Choose a menu item and a setting as desired
z Press the op buttons to choose a selection
method, and then press the m button.
z To return to the menu screen, press the
n button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 9
Erasing Images
Choosing Images Individually
Choose [Select].
and press the m button.
Choose an image.
an image,
z To cancel erasure, press the m button
again. is no longer displayed.
is displayed.
z Repeat this process to specify other images.
Erase the image.
z Press the n button. A confirmation
message is displyed.
z Press the qr buons to choose [OK], and
then presm utton.
Selecting a Range
Choose [Select Range].
Range] and press the m button.
Choose images.
images.
Erase the images.
z Press the p button to choose [Erase], and
then press the m button.
14D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Erasing Images
Specifying All Images at Once
Choose [Select All Images].
Images] and press the m button.
Erase the images.
z Press the qr buttons to choose [OK], and
then press the m button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 1
Still Images
Movies
Rotating Images
Change the orientation of images and save them as follows.
Choose \.
z Press the m button, and then choose \ in
Rotate the image.
z Press the q or r button, depending on the
desired direction. Each time you press the
button, the image is rotated 90°. Press the
m button to complete the setting.
Using the Menu
Ch[Rotate].
z Prss the n button, and then choose
Rotate the image.
z Press the qr buttons to choose an image.
z The image is rotated 90° each time you press
the m button.
z To return to the menu screen, press the
n button.
• Movies with an image quality of
or
cannot be rotated.
14D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Rotating Images
Deactivating Auto Rotation
Follow these steps to deactivate automatic rotation by the camera, which
rotates images shot in vertical orientation so they are displayed vertically on
the camera.
z Press the n button, choose [Auto
Rotate] on the 1 tab, and then choose [Off]
[Off]. Additionally, images already rotated will be displayed in the
original orientation.
images shot vertically will be diyed vertically, and rotated images
will be displayed in the roentation.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 3
Still Images
Movies
Image Categories
choosing a category in image search, you can restrict the following operations
to all of those images.
•
Tagging Images as Favorites
z Press the m button, and then choose
in
X [Tagged as Favorite] is displayed.
z To untag the image, repeat this process and
choose
button.
again, and then press the m
Using the Menu
Chse Favorites].
z Pren button, and then choose
Choose an image.
z Press the qr buttons to choose an image,
and then press the m button.
displayed.
is
z To untag the image, press the m button
again. is no longer displayed.
z Repeat this process to choose additional
images.
14D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Image Categories
Finish the setup process.
z Press the n button. A confirmation
message is displayed.
z Press the qr buttons to choose [OK], and
then press the m button.
• Images will not be tagged as favorites if you switch to Shooting mode
or turn the camera off before finishing the setup process in step 3.
• Favorite images will have a three-star rating (
) when transferred
to computers running Windows 7 or Windows Vista. (Does not apply to movies.)
Organizing Images by Category (My Category)
You can organize images into categories. Notthat images are automatically
categorized at the time of shooting, ading o shooting conditions.
:Images with detected faces, or ims shot in I or
mode.
:Images detected as
mode.
,
n A mode, or images shot in
:Images shot in S or P mode.
Choose a category.
z Press the m button, and then choose ; in
Choose images.
z Press the qr buttons to choose an image,
press the op buttons to choose a category,
and then press the m button.
displayed.
is
z To cancel selection, press the m button
again. is no longer displayed.
z Repeat this process to specify other images.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 5
Image Categories
Finish the setup process.
z Press the n button. A confirmation
message is displayed.
z Press the qr buttons to choose [OK], and
then press the m button.
•
Images will not be assigned to a category if you switch to Shooting mode
or turn the camera off before finishing the setup process in step 3.
Using the Menu
Access the setting screen.
z Press the n button, and then choose
Cha selection method.
z Choose a menu item and a setting as desired
z To return to the menu screen, press the
n button.
Choosing Images Individually
Choose [Select].
z Following step 2 above, choose [Select] and
press the m button.
Choose an image.
z Press the qr buttons to choose an image.
14D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Image Categories
Choose a category.
z Press the op buttons to choose a category,
and then press the m button.
displayed.
is
z To cancel selection, press the m button
again. is no longer displayed.
z Repeat this process to choose additional
images.
Finish the setup process.
z Press the n button. A confirmation
message is displayed. Press the qr buttons
to choose [OK], and then press the m
button.
•
Images will not be assigned to a cgory you switch to Shooting mode
or turn the camera off before fing the etup process in step 4.
Selecting a Range
Choose [Select Range].
Range] and press the m button.
Choose images.
images.
Choose a category.
z Press the p button to choose the type of
image, and then press the qr buttons to
choose a category.
Finish the setup process.
z Press the p button to choose [Select], and
then press the m button.
• You can clear the selection of all images in the [Select Range] category by
choosing [Deselect] in step 4.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 7
Still Images
Editing Still Images
card has sufficient free space.
Resizing Images
Save a copy of images at a lower resolution.
Choose [Resize].
z Press the n button, and then choose
Choose an image.
z Press the qr buttons to choose an image,
and then press the m button.
Choose an image size.
z Press the buttos to choose the size, and
thess he m button.
X [Saw image?] is displayed.
Save the new image.
z Press the qr buttons to choose [OK], and
then press the m button.
X The image is now saved as a new file.
Review the new image.
z Press the n button. [Display new
image?] is displayed.
z Press the qr buttons to choose [Yes], and
then press the m button.
X The saved image is now displayed.
14D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
• Editing is not possible for images saved as
• Images cannot be resized to a higher resolution.
in step 3.
Cropping
You can specify a portion of an image to save as a separate image file.
Choose [Trimming].
z Press the n button, and then choose
Choose an image.
z Press the qr buttons to choose an image,
and tress the m button.
Cropping Area
ust the cropping area.
X A e is displayed around the portion of the
image to be cropped.
X The original image is shown in the upper left,
and a preview of the image as cropped is
shown in the lower right.
z To resize the frame, move the zoom lever.
z
To move the frame, press the opqr buttons.
z To change the frame orientation, press the
m button.
z Press the n button.
Preview of Image After
Cropping
Resolution After Cropping
Save as a new image and review.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 9
Editing Still Images
• Editing is not possible for images shot at a resolution of
resized to
• Images supported for cropping will have the same aspect ratio after cropping.
• Cropped images will have a smaller resolution than uncropped images.
• If you crop still images shot using Face ID, only the names of the people left in
the cropped image will remain.
Changing Image Color Tones (My Colors)
You can adjust image colors and then save the edited image as a separate
file. For details on each option, see p. 108.
Choose [My Colors].
z Press the n button, and then choose
Choose imge.
z Pree r buttons to choose an image,
anpress the m button.
Choose an option.
z Press the qr buttons to choose an option,
and then press the m button.
Save as a new image and review.
• Image quality of pictures you repeatedly edit this way will be a little
lower each time, and you may not be able to obtain the desired color.
• The color of images edited using this function may vary slightly from the color of
images shot using My Colors (p. 108).
15D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects stand
out better. Choose from four correction levels, and then save the image as a
separate file.
Choose [i-Contrast].
z Press the n button, and then choose [i-
Choose an image.
z Press the qr buttons to choose an image,
and then press the m button.
Choose an option.
z Press qr buttons to choose an option,
thepress the m button.
as a new image and review.
• For some images, correction may be inaccurate or may cause
images to appear grainy.
• Images may look grainy after repeated editing using this function.
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
Download from Www.Somanuals.com. All Manuals Search And Downloa1d5. 1
Editing Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
Choose [Red-Eye Correction].
z Press the n button, and then choose
Choose an image.
z Press the qr buttons to choose an image.
Correct the image.
z Press the m button.
X Red-eye detected by the camera is now
corrected, and frames are displayed around
corrected image eas.
z Enlarge ouce iages as needed. Follow
Sava new image and review.
z Prss the opqr buttons to choose [New
File], and then press the m button.
X The image is now saved as a new file.
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
15D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Movies
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
Choose *.
choose * and press the m button.
X The movie editing panel and editing bar are
now displayed.
Movie Editing Panel
Specify portions to cut.
z Press the op buttons to choose
or
.
z To view the portions you can cut (identified by
on the screen), press the qr buttons to
move . Cut te beginning of the movie (from
) boosig
movie choosing
, and cut the end of the
.
z if yu move to a position other than a
Movie Editing Bar
ark, choosing
will only cut the
portion from the nearest
to the left, and
choosing
nearest
will cut the portion from the
to the right.
Review the edited movie.
z Press the op buttons to choose
, and
then press the m button. The edited movie is
now played.
z To edit the movie again, repeat step 2.
z To cancel editing, press the op buttons to
choose
. Press the m button, press the
qr buttons to choose [OK], and then press
the m button again.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d5. 3
Editing Movies
Save the edited movie.
z Press the op buttons to choose
then press the m button.
, and
z Press the qr buttons to choose [New File],
and then press the m button.
X The movie is now saved as a new file.
• To overwrite the original movie with the cut one, choose [Overwrite]
in step 4. In this case, the original movie will be erased.
• [Overwrite] is only available when memory cards lack sufficient free
space.
• Movies may not be saved if the battery runs out while saving is in
progress.
• When editing movies, you should use a fully charged battery or an
15D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Functions can be configured on the 3 tab. Customize commonly used
Silencing Camera Operations
Silence camera sounds and movies as follows.
z Choose [Mute], and then choose [On].
• Operation can also be silenced by holding down the p button as you turn the
camera on.
restore sound during movies, press the o butoAdjust volume with the op
buttons, as needed.
Adjusting the Volum
Adjust the volume of individal camera sounds as follows.
z Choose [Volume], and then press the m
button.
z Choose an item, and then press the qr
buttons to adjust the volume.
15D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Customizing Sounds
Customize camera operating sounds as follows.
z Choose [Sound Options], and then press the
m button.
z Choose an item, and then press the qr
buttons to choose an option.
Preset sounds
1
(cannot be modified)
Preset sounds
2
Can be changed by using the included
software.
• The default shutter sound is used in
changes to [Shutter Sound].
Hiding Hints and Tps
z Choose [Hints & Tips], and then choose [Off].
Download from Www.Somanuals.com. All Manuals Search And Downloa1d5. 7
Adjusting Basic Camera Functions
Screen Brightness
Adjust screen brightness as follows.
z Choose [LCD Brightness], and then press the
qr buttons to adjust the brightness.
• For maximum brightness, press and hold the p button for at least one second
when the shooting screen is displayed or when in single-image display. (This
will override the [LCD Brightness] setting on the 3 tab.) To restore the original
brightness, press and hold the p button again for at least one second or restart
the camera.
Start-up Screen
Customize the start-up screen shoer ou turn the camera on as follows.
z Choose [Start-up Image], and then press the
m button.
z Press the qr buttons to choose an option.
No start-up image
Preset images
1
(cannot be modified)
Preset images
2
Assign desired shots, or use the included
software to change the image.
15D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Customizing the Start-up Screen
Access the [Start-up Image] screen
in Playback mode.
z Press the 1 button.
press the m button.
Choose one of your shots.
z Choose an image and press the m button.
After [Register?] is displayed, press the qr
buttons to choose [OK], and then press the
m button.
• The previous start-up setting irwriten when you assign a new
start-up image.
• You can assign the operating s and start-up images for your camera from
the included softwarFor details, refer to the ImageBrowser EX User Guide.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d5. 9
Adjusting Basic Camera Functions
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images
on the memory card to a computer, or take other steps to back them up.
an Eye-Fi card, install the software on a computer.
Access the [Format] screen.
z Choose [Format], and then press the m
button.
Choose [OK].
z Press the qr buttons to choose [OK], and
then press the m button.
Format e mmory card.
z To in tformatting process, press the
oons to choose [OK], and then press
the utton.
z Wen formatting is finished, [Memory card
formatting complete] is displayed. Press the
m button.
• Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
• The total card capacity indicated on the formatting screen may be less than the
advertised capacity.
16D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Low-Level Formatting
Perform low-level formatting in these cases: [Memory card error] is displayed,
the camera is not working correctly, card image reading/writing is slower,
continuous shooting is slower, or movie recording suddenly stops. Low-level
formatting erases all data on a memory card. Before low-level formatting,
copy images on the memory card to a computer, or take other steps to back
them up.
Perform low-level formatting.
op buttons to choose [Low Level Format],
and then select this option (mark with a
by pressing the qr buttons.
z Press the opqr buttons to choose [OK],
)
press the m button, and then follow step 3
memard.
because data is erased rom age regions of the memory card.
• You can cancel low-vel formag in progress by choosing [Stop]. In this case,
all data will be erasedbut e memory card can be used normally.
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999) and
saved in folders that store up to 2,000 images each. You can change how the
camera assigns file numbers.
z Choose [File Numbering], and then choose
an option.
Images are numbered
consecutively (until the 9999th shot
is taken/saved) even if you switch
Continuous
memory cards.
Image numbering is reset to 0001 if
Auto Reset
you switch memory cards, or when
a new folder is created.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d6. 1
Adjusting Basic Camera Functions
• Regardless of the option selected in this setting, shots may be numbered
consecutively after the last number of existing images on newly inserted
memory cards. To start saving shots from 0001, use an empty (or formatted
(p. 160)) memory card.
• Refer to the ImageBrowser EX User Guide for information on the card folder
structure and image formats.
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
z Choose [Create Folder], and then choose
[Daily].
X Images will now be saved in folders created
on the shooting date.
Lens Retraction Tim
The lens is normally retracted for sfety about one minute after you press the
after you press the 1 button, set the retraction timing to [0 sec.].
z Choose [Lens Retract], and then choose
[0 sec.].
16D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Access the [Power Saving] screen.
z Choose [Power Saving], and then press the
m button.
Configure the settings.
z After choosing an item, press the qr buttons
to adjust it as needed.
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if set [Auto Power Down] to [Off].
Download from Www.Somanuals.com. All Manuals Search And Downloa1d6. 3
Adjusting Basic Camera Functions
World Clock
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
home time zone.
Specify your destination.
z Choose [Time Zone], and then press the m
button.
z Press the op buttons to choose [
and then press the m button.
z Press the qr buttons to choose the
destination.
World],
z To set daylight sing time (1 hour ahead),
press the buttns to choose
z Pree m button.
.
Swto the destination time
zone.
z Press the op buttons to choose [
and then press the n button.
World],
X
is now shown on the shooting screen
• Adjusting the date or time while in
your [ Home] time and date.
mode (p. 18) will automatically update
16D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Date and Time
Adjust the date and time as follows.
Access the [Date/Time] screen.
z Choose [Date/Time], and then press the m
button.
Configure the settings.
z Press the qr buttons to choose an item, and
then press the op buttons to adjust the
setting.
Display Language
Change the display language as needed.
Accethe Language] screen.
z se Language ], and then press the
tton.
Configure the setting.
z Press the opqr buttons to choose a
language, and then press the m button.
• You can also access the [Language] screen in Playback mode by pressing and
holding the m button and immediately pressing the n button.
Adjusting Other Settings
The following settings can also be adjusted on the 3 tab.
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Downloa1d6. 5
Adjusting Basic Camera Functions
Restoring Defaults
If you accidentally change a setting, you can restore default camera settings.
Access the [Reset All] screen.
z Choose [Reset All], and then press the m
button.
Restore default settings.
z Press the qr buttons to choose [OK], and
then press the m button.
X Default settings are now restored.
• The following functions are not restored to default settings.
16D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Tips on Using Included Accessories
Effective Battery and Charger Use
• Charge the battery on (or immediately before) the day of
use
Charged batteries gradually lose their charge, even when
they are not used.
You can easily check the charge state of the battery by
attaching the cover so that S is visible on a charged battery,
and attaching it so that S is not visible on an uncharged battery.
• Long-term battery storage
After using up all remaining battery power, remove the battery from the camera.
Store the battery with the cover attached. Storing a partially charged battery over
extended periods (about a year) may shorten its life or affect performance.
• Using the battery charger abroad
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for the
plug. Never use an electrical transformer designed for traveling, which may
damage the battery.
16D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
The following camera accessories are sold separately. Note that availability
varies by area, and some accessories may no longer be available.
Power Supplies
Battery Pack NB-11L
z Rechargeable lithium-ion battery
Battery Charger CB-2LD/CB-2LDE
z Charger for Battery Pack NB-11L
AC Adapter Kit ACK-DC90
z For powering the camera using household
power. Recommended when using the
camera over extended periods, or when
connecting the camera to a printer or
computer. Cannot be used to charge the
camera batte.
• The battery charger and AC adkit cn be used in areas with 100
– 240 V AC power (50/6).
• For power outlets in a diformat, use a commercially available
adapter for the plug. Never e an electrical transformer designed for
traveling, which may damage the battery.
Flash Units
High-Power Flash HF-DC2
z External flash for illuminating subjects that
are out of range of the built-in flash.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d6. 9
Optional Accessories
Other Accessories
Waterproof Case WP-DC330L
z For underwater photography at depths of up
to 3 meters (9.8 ft.). Also useful for shooting
in the rain, at the beach, or on ski slopes.
AV Cable AVC-DC400
z Connect the camera to a TV to enjoy
playback on the larger TV screen.
HDMI Cable HTC-100
z For connecting the camera to an HDMI input
of a high-definition TV.
Printers
Canon Bridge-Compatible Printers
z Prnting images without a computer is
possible by connecting the camera to a
Canon PictBridge-compatible printer.
For details, visit your nearest Canon dealer.
SELPHY
Series
PIXMA
Series
17D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
Movies
Still Images
Playback on a TV
By connecting the camera to a TV, you can view your shots on the larger
screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
Playback on a Standard-Definition TV
Connecting the camera to a TV with the AV Cable AVC-DC400 (sold
separately) enables you to view your shots on the larger screen of the TV as
you control the camera.
Make sure the camera and TV are
off.
Black or white
nnct the camera to the TV.
Yellow
z TV, insert the cable plugs fully into the
vido inputs as shown.
Yellow
Black
z On the camera, open the terminal cover and
insert the cable plug fully into the camera
terminal.
Turn the TV on and switch to video
input.
z Switch the TV input to the video input you
connected the cable to in step 2.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 1
Using Optional Accessories
Turn the camera on.
z Press the 1 button to turn the camera on.
X Images from the camera are now displayed
on the TV. (Nothing is displayed on the
camera screen.)
z When finished, turn off the camera and TV
before disconnecting the cable.
• Correct display is not possible unless the camera video output format
(NTSC or PAL) matches the TV format. To change the video output
format, press the n button and choose [Video System] on the
3 tab.
• When the camera and TV are connected, you can also shoot while previewing
shots on the larger screen of the TV. To shoot, follow the same steps as when
using the camera screen.
Playback on a High-Definition V
Connecting the camera to an HDTV with HDMI Cable HTC-100 (sold
separately) enables you to view yots on the larger screen of the TV.
Movies shot at a resolution f
o
can be viewed in high-definition.
Make sure the camera and TV are
off.
Connect the camera to the TV.
z On the TV, insert the cable plug fully into the
HDMI input as shown.
z On the camera, open the terminal cover and
insert the cable plug fully into the camera
terminal.
17D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
Display images.
images.
• It is not possible to connect the included interface cable or an optional
AV cable at the same time as an HDMI Cable HTC-100. Forcing the
cables into the camera at the same time may damage the camera or
cables.
• Camera operating sounds are not played while the camera is connected to an
HDTV.
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
In this case, you will need to adjust some TV sttings. For details, refer to the
TV user manual.
figure the settings.
z the n button, choose [Ctrl via
HDMI] on the 3 tab, and then choose
Connect the camera to the TV.
camera to the TV.
Display images.
z Turn on the TV. On the camera, press the 1
button.
X Images from the camera are now displayed
on the TV. (Nothing is displayed on the
camera screen.)
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 3
Using Optional Accessories
Control the camera with the TV
remote.
z Press the qr buttons on the remote to
browse images.
z To display the camera control panel, press
the OK/Select button. Select control panel
items by pressing the qr buttons to choose
an item, and then pressing the OK/Select
button again.
Camera Control Panel Options Shown on the TV
Return
Closes the menu.
Displays sets of images shot in
displayed when a grouped image is selected.)
Group Playback
Starts movie playback(Only displayed when a movie is
selected.)
Play Movie
Slideshow
Starts slidow yback. To switch images during
playbackthe qr buttons on the remote control.
.
Index Playback
Change Display
Dsplays mle images in an index.
l
• Pressing any buttons on the camera will switch control to the camera itself,
which will prevent remote control until you return to single-image display.
• The camera may not always respond correctly even if the remote is for an HDMI
CEC-compatible TV.
17D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
Make sure the camera is off.
Coupler Cable Port
Open the cover.
card/battery cover.
z Open the coupler cable port as shown.
Insert the coupler.
z Insert the couler as shown.
z Make sure the coupler cable passes through
the port.
Cable
Close the cover.
z Lower the cover ( ) and hold it down as you
slide it, until it clicks into the closed position
(
).
Connect the power cord.
z Insert the adapter plug into the end of the
coupler cable.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 5
Using Optional Accessories
z Insert one end of the power cord into the
compact power adapter, and then plug the
other end into a power outlet.
z Turn the camera on and use it as desired.
z When finished, turn the camera off and
unplug the power cord from the outlet.
• Do not disconnect the adapter or unplug the power cord while the
camera is still on. This may erase your shots or damage the camera.
• Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
17D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Printing Images
Your shots can easily be printed by connecting the camera to a printer. On
the camera, you can specify images to set up batch printing, prepare orders
for photo development services, and prepare or print images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the sake
of illustration. Screens displayed and available functions vary by printer. Also
refer to the printer manual for additional information.
Still Images
Easy Print
Easily print your shots by connecting the camera to a PictBridge-compatible
Make sure the camera and printer
are off.
Connect thcamera to the printer.
z Open tcover. Holding the smaller cable
n the orientation shown, insert the plug
fto the camera terminal.
z Connect the larger cable plug to the printer.
For other connection details, refer to the
printer manual.
Turn the printer on.
Turn the camera on.
z Press the 1 button to turn the camera on.
Choose an image.
z Press the qr buttons to choose an image.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 7
Printing Images
Access the printing screen.
z Press the m button, choose c, and press
the m button again.
Print the image.
z Press the op buttons to choose [Print], and
then press the m button.
X Printing now begins.
z To print other images, repeat steps 5 – 6 after
printing is finished.
z When you are finished printing, turn the
camera and printr off and disconnect the
interface cable.
17D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Still Images
Configuring Print Settings
Access the printing screen.
the screen at left.
Configure the settings.
z Press the op buttons to choose an item,
and then press the qr buttons to choose an
option.
Default
Date
Matches current printer settings.
Prints images with the date added.
File No.
Both
Prints images with te file number added.
Prints imagewith bh the date and file number added.
Off
–
Default
Off
Matrrent printer settings.
–
Uses information from the time of shooting to print under
optimal settings.
On
Red-Eye 1
Corrects red-eye.
No. of Copies Choose the number of copies to print.
Trimming
–
–
Specify a desired image area to print (p. 180).
Paper
Settings
Specify the paper size, layout, and other details (p. 181).
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 9
Printing Images
Cropping Images Before Printing (Trimming)
By cropping images before printing, you can print a desired image area
instead of the entire image.
Choose [Trimming].
printing screen, choose [Trimming] and press
the m button.
X A cropping frame is now displayed, indicating
the image area to print.
Adjust the cropping frame as
needed.
z To resize the frame, move the zoom lever.
z To move the frame, press the opqr
buttons.
z To rotate ramepress the m button.
z Pre n button, press the op
buttchoose [OK], and then press the
m button.
Print the image.
• Cropping may not be possible at small image sizes, or at some
aspect ratios.
• Dates may not be printed correctly if you crop images shot with [Date
Stamp] selected.
18D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Choosing Paper Size and Layout Before Printing
Choose [Paper Settings].
printing screen, choose [Paper Settings] and
press the m button.
Choose a paper size.
z Press the op buttons to choose an option,
and then press the m button.
Chooe a tpe of paper.
z Pess top buttons to choose an option,
en press the m button.
Choose a layout.
z Press the op buttons to choose an option.
z When choosing [N-up], press the qr buttons
to specify the number of images per sheet.
z Press the m button.
Print the image.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d8. 1
Printing Images
Available Layout Options
Default
Matches current printer settings.
Bordered
Borderless
N-up
Prints with blank space around the image.
Borderless, edge-to-edge printing.
Choose how many images to print per sheet.
Prints images for identification purposes.
Only available for images with a resolution of L and an aspect ratio of 4:3.
ID Photo
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Fixed Size
Printing ID Photos
Choose [ID Photo].
Photo] anress he m button.
Chse he long and short side
len
z Press the op buttons to choose an item.
Choose the length by pressing the qr
buttons, and then press the m button.
Choose the printing area.
area.
Print the image.
18D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Movies
Printing Movie Scenes
Access the printing screen.
a movie. The screen at left is displayed.
Choose a printing method.
z Press the op buttons to choose
, and
then press the qr buttons to choose the
printing method.
Print the image.
Movie Printing Options
Single
Prints the current scene as a still ime.
Prints a series of scenes, a in interval apart, on a single sheet of
paper. You can alshe older number, file number, and elapsed
time for the frame b[Caption] to [On].
Sequence
• To cancel printing in pogrss, press the m button.
• [ID Photo] and [Sequence] are not available with Canon PictBridge-compatible
printer models earlier than CP720 and CP730.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d8. 3
Printing Images
Still Images
Adding Images to the Print List (DPOF)
can be set up on the camera. Choose up to 998 images on a memory card
and configure relevant settings, such as the number of copies, as follows. The
printing information you prepare this way will conform to DPOF (Digital Print
Order Format) standards.
Adding Images to the Print List via the FUNC. Menu
You can add images to the print list (DPOF) after your shot or later during
playback via the FUNC. menu.
Choose an image.
z Press the qr buttons to choose an image.
Add the imagto the print list.
z Press the buttn, choose c in the menu,
and press m button again.
z Prop buttons to specify the number
of pChoose [Add] by pressing the qr
buttons, and then press the m button.
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and other
settings as follows. These settings apply to all images in the print list.
z Press the n button, and then choose
[Print Settings] on the 2 tab. Choose and
18D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Standard
Index
One image is printed per sheet.
Smaller versions of multiple images are printed per
sheet.
Print Type
Both
On
Off
On
Off
On
Off
Both standard and index formats are printed.
Images are printed with the shooting date.
Date
–
Images are printed with the file number.
File No.
–
All image print list settings are cleared after printing.
–
Clear DPOF
data
• Not all of your DPOF settings may be applied in printing by the printer
or photo development service, in some cases.
•
may be displayed on the cra to warn you that the memory
card has print settings that wernfigured on another camera.
Changing the print settiing this camera may overwrite all
previous settings.
• Setting [Date] to [On] may cause some printers to print the date twice.
• Specifying [Index] will prevent you from choosing [On] for both [Date] and [File
No.] at the same time.
• The date is printed in a format matching setting details in [Date/Time] on the 3
• Index printing is not available on some Canon PictBridge-compatible printers
(sold separately).
Download from Www.Somanuals.com. All Manuals Search And Downloa1d8. 5
Printing Images
Setting Up Printing for Individual Images
Choose [Select Images & Qty.].
z Press the n button, choose [Select
Images & Qty.] on the 2 tab, and then press
the m button.
Choose an image.
z Press the qr buttons to choose an image,
and then press the m button.
X You can now specify the number of copies.
z If you specify index printing for the image, it is
labeled with a
printing for the image, press the m button
again. is no longer displayed.
icon. To cancel index
Specify the nmber of prints.
z Press the buttns to specify the number
of p(uto 99).
z
To printing for other images and specify
the nuber of prints, repeat steps 2 - 3.
z Prnting quantity cannot be specified for index
prints. You can only choose which images to
print, by following step 2.
z When finished, press the n button to
return to the menu screen.
Setting Up Printing for a Range of Images
Choose [Select Range].
z Following step 1 above, choose [Select
Range] and press the m button.
Choose images.
images.
18D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Configure the print settings.
z Press the op buttons to choose [Order],
and then press the m button.
Setting Up Printing for All Images
Choose [Select All Images].
Images] and press the m button.
Configure the print settings.
z Press the qr buttons to choose [OK], and
then press the m button.
Clearing All Images from the Print List
Choose [Cear All Selections].
Selecand press the m button.
irm clearing the print list.
z Prs the qr buttons to choose [OK], and
then press the m button.
Printing Images Added to the Print List (DPOF)
z When images have been added to the print
displayed after you connect the camera to a
PictBridge-compatible printer. Press the op
buttons to choose [Print now], and then
simply press the m button to print the
images in the print list.
z Any DPOF print job that you temporarily stop
will be resumed from the next image.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d8. 7
Printing Images
Still Images
Adding Images to a Photobook
Photobooks can be set up on the camera by choosing up to 998 images on a
memory card and importing them into the included software on your
computer, where they are stored in their own folder. This is convenient when
ordering printed photobooks online or printing photobooks with your own
printer.
Choosing a Selection Method
z Press the n button, choose [Photobook
Set-up] on the 1 tab, and then choose how
you will select images.
•
may be displayed on the cameo warn you that the memory
card has print settings that onigured on another camera.
Changing the print setings his camera may overwrite all
previous settings.
• After importing images to your computer, also refer to the ImageBrowser EX
User Guide and the printer manual for further information.
Adding Images Individually
Choose [Select].
z Following the previous procedure, choose
[Select] and press the m button.
18D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Choose an image.
z Press the qr buttons to choose an image,
and then press the m button.
X
is displayed.
z To remove the image from the photobook,
press the m button again.
displayed.
is no longer
z Repeat this process to specify other images.
z When finished, press the n button to
return to the menu screen.
Adding All Images to a Photobook
Choose [Select All Images].
[Select All Imges] and press the m button.
Confre te print settings.
z ss tqr buttons to choose [OK], and
ress the m button.
Removing All Images from a Photobook
Choose [Clear All Selections].
[Clear All Selections] and press the m
button.
Confirm clearing the photobook.
z Press the qr buttons to choose [OK], and
then press the m button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d8. 9
Still Images
Movies
Using an Eye-Fi Card
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user manual or
contact the manufacturer for instructions on preparing and using cards or
resolving transfer problems.
• When using an Eye-Fi card, keep the following points in mind.
• Cards may continue to transmit radio waves even when [Eye-Fi
entering hospitals, aircraft, or other areas where transmission is
prohibited.
• When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card’s user manual.
• Poor wireless connections may cause imge transfer to take a long
time, and transfer may be interrupted in ome cases.
• Eye-Fi cards may become hot, dtheitransfer functions.
• Battery power will be consd fater than in normal use.
• Camera operation may beluggish. To resolve this, try setting
[Eye-Fi trans.] to [Dsable].
Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen (in
simple information display mode).
(Gray)
Not connected
Connecting
(Blinking white)
(White)
Connected
(Animated)
Transfer in progress
Interrupted
Error acquiring Eye-Fi card information (Restart the camera.
Repeated display of this icon may indicate a problem with the
card.)
Images labeled with a
icon have been transferred.
19D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Using an Eye-Fi Card
transfer.
• Choosing
mode will interrupt the Eye-Fi connection. Although the Eye-Fi
connection will be restored after you choose another shooting mode or enter
Playback mode, the camera may transfer any movies made in
mode again.
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the connection
status, as needed.
z Press the n button, choose [Eye-Fi
Settings] on the 3 tab, and then press the
m button.
z Choose [Connection info], and then press the
m button.
X The connection information screen is
displayed.
Disabling Eye-Fi Tsfer
Configure the setting as ollows table Eye-Fi transfer by the card, if
necessary.
Choose [Disable] in [Eye-Fi trans.].
z Press the n button, choose [Eye-Fi
Settings] on the 3 tab, and then press the
m button.
z Choose [Eye-Fi trans.], and then choose
[Disable].
• [Eye-Fi Settings] is not shown unless an Eye-Fi card is in the camera
with its write-protect tab in the unlocked position. For this reason, you
cannot change settings for an inserted Eye-Fi card if the write-protect
tab is in the locked position.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d9. 1
19D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you think there is a problem with the camera, first check the following. If the
items below do not solve your problem, contact a Canon Customer Support
Help Desk.
Power
Nothing happens when the power button is pressed.
• Confirm that you are using the correct type of battery, and that there is sufficient charge
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery a few times.
The battery is depleted quickly.
• Battery performance decreases at low temperatures. Try warming the battery a little by
putting it in your pocket, for example, with the terminal cover on.
• If these measures do not help and the battery is still depleted soon after charging, it has
reached the end of its life. Purchase a new battery.
The lens is not retracted.
• Do not open the memory card/battery cover while thmera is on. Close the cover,
The battery is swollen.
• Battery swelling is normal and does nansafety concerns. However, if battery
swelling prevents the battery frm fittincamera, contact a Canon Customer
Support Help Desk.
Display on a TV
Shooting
Cannot shoot.
Strange display on the screen under low light (p. 36).
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are recorded
in movies.
• The screen may flicker and horizontal banding may appear under fluorescent or LED
lighting.
h flashes on the screen when the shutter button is pressed, and shooting is
not possible (p. 45).
19D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
• Mount the camera on a tripod or take other measures to keep it still. In this case, set [IS
Mode] to [Off] (p. 119).
Shots are out of focus.
• Press the shutter button halfway to focus on subjects before pressing it all the way down
• Make sure subjects are within focusing range (see “Specifications” in the Getting
Started guide).
• Confirm that unneeded functions such as macro are deactivated.
No AF frames are displayed and the camera does not focus when the shutter
button is pressed halfway.
• To have AF frames displayed and the camera focus correctly, try composing the shot
with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter buttn alfway repeatedly.
Subjects in shots look too dark.
Subjects look too bright, highlights are washed-out.
• Reduce the lighting on subjects.
• Shoot within flash range (see “Specifications” in the Getting Started guide).
Subjects in flash shots look too bright, highlights are washed-out.
• Shoot within flash range (see “Specifications” in the Getting Started guide).
White dots or similar image artifacts appear in flash shots.
• This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d9. 5
Troubleshooting
shots. Note that while the red-eye reduction lamp is on (for about one second), it is not
possible to shoot, because the lamp is counteracting red-eye. For best results, have
subjects look at the red-eye reduction lamp. Also try increasing the lighting in indoor
scenes and shooting at closer range.
Recording to the memory card takes too long, or continuous shooting is
slower.
Shooting settings or FUNC. menu settings are not available.
• Available setting items vary by shooting mode. Refer to “Functions Available in Each
The Babies or Children icon does not display.
• The Babies and Children icons will not display if the birthday is not set in face
information (p. 57). If the icons still do not display even when you set the birthday, re-
Shooting Movies
The elapsed time shown is incorrer reording is interrupted.
• Use the camera to format the memory swch to a card that supports high-speed
recording. Note that even if thelapsed display is incorrect, the length of movies
is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
• Switch to a memory card that supports high-speed recording (see “Specifications” in the
Getting Started guide).
Subjects look distorted.
•
Subjects that pass in front of the camera quickly may look distorted. This is not a malfunction.
Playback
Playback is not possible.
• Image or movie playback may not be possible if a computer is used to rename files or
alter the folder structure. Refer to the ImageBrowser EX User Guide for details on folder
structure and file names.
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
19D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Handling Precautions
• There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the transfer
speed as follows.
• Press the 1 button to enter Playback mode. Hold the n button down as you press
the o and m buttons at the same time. On the next screen, press the qr buttons to
choose [B], and then press the m button.
Eye-Fi Cards
Handling Precautions
•
•
The camera is a high-precision eleic dvice. Avoid dropping it or
subjecting it to strong impact.
Never bring the camera neaet, motors, or other devices that
generate strong electrmagnelds, which may cause malfunction or
erase image data.
•
•
•
•
If water droplets or dirt adheres to the camera or screen, wipe with a dry
soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
Never use cleaners containing organic solvents to clean the camera or
screen.
Use a blower brush to remove dust from the lens. If cleaning is difficult,
contact a Canon Customer Support Help Desk.
To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to warm
environments), put the camera in an airtight, resealable plastic bag and let
it gradually adjust to the temperature before removing it from the bag.
If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove the
battery and memory card, and wait until the moisture has evaporated
before resuming use.
•
Download from Www.Somanuals.com. All Manuals Search And Downloa1d9. 7
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (p. 16).
Memory card locked
• The write-protect tab of the SD/SDHC/SDXC memory card or Eye-Fi card is set to the
locked position. Switch the write-protect tab to the unlocked position (p. 15).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (p. 16).
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk
Insufficient space on card
card with enough free space (p. 15).
Change the battery pack. (p. 15)
No Image.
• The memory card does not conain ans that can be displayed.
Protected! (p. 135)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back
AVI/RAW
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot
rotate/Cannot modify image/Cannot register this image!/Cannot modify/
Cannot assign to category/Unselectable image/No identification information.
•
The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Invalid selection range
to choose an initial image that was after the final image, or vice-versa.
19D8ownload from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Messages
Exceeded selection limit
(p. 188). Choose 998 images or less.
Reduce the number of selected images and try again.
Communication error
• An excessive amount of images (approx. 1,000) on the memory card prevented printing
or image transfer to a computer. To transfer the images, use a commercially available
USB card reader. To print, insert the memory card directly into the printer card slot.
Naming error!
• When the highest folder number (999), and the highest image number (9999) has been
reached, new folders cannot be created, and images cannot be recorded. In the 3
Lens Error
• This error may occur if the lens is held wis moing, or when the camera is used
in dusty or sandy locations.
• Frequent display of this error mesay ndicate camera damage. In this case,
contact a Canon Customer SuppoDesk.
A camera error was deteted (error number)
• If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage. In this case, write
down the error number (Exx) and contact a Canon Customer Support Help Desk.
File Error
• It may not be possible to print computer-edited images or images shot with another
camera.
Print error
• Check the paper size setting. If this error message is displayed when the setting is
correct, restart the printer and complete the setting on the camera again.
Ink absorber full
• Contact a Canon Customer Support Help Desk to request assistance with ink absorber
replacement.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d9. 9
On-Screen Information
Shooting (Information Display)
Camera orientation*
Camera shake warning
Digital
Shutter speed
Aperture value
Exposure compensation
level (p. 103)
i-Contrast (p. 105)
Mercury lamp correction
Digital telnverter
Shooting mode (p. 204),
Scene icon (p. 47)
Focusing range
Red-eye correction
Spot AE point frame
Date stamp (p. 55)
ISO speed (p. 104)
Eye-Fi connection status
Super slow motion movie
Zoom bar (p. 42)
Image stabilization icon
Image stabilization (p. 119)
Time zone (p. 164)
Exposure compensation
bar
Metering method
Compression
Recordable shots
Remaining time
20D0ownload from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Information
*
: Regular orientation,
: Held vertically
The camera detects the shooting orientation and adjusts settings for optimal shots.
Orientation is also detected during playback, and in either orientation, the camera
automatically rotates images as needed.
However, the orientation may not be detected correctly when the camera is pointed
straight up or down.
Battery Level
An on-screen icon or message indicates the battery charge level.
Display
Details
Sufficient charge
Slightly depleted, but sufficient
(Blinking red) Nearly depleted – charge the battery soon
[Change the battery pack.]
Depleted – charge the battery immediately
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 1
On-Screen Information
Playback (Detailed Information Display)
High-speed burst (p. 96),
Shooting mode (p. 204)
Playback speed (pp. 85,
MOV ()
Transfea Eye-Fi
Metering method (p. 104)
Folder number - File
Current image no. / Total
no. of images
Flash (p. 117)
File size
Still images: Resolution
Movies: Movie length
Mercury lamp correction
Red-eye correction
Shooting date/time
Exposure compensation
Group playback (p. 128),
Shutter speed (still
images), Image quality /
Frame rate (movies)
Aperture value
Compression ratio
20D2ownload from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Information
Summary of Movie Control Panel in “Viewing” (p. 122)
Exit
Play
Slow Motion (Press the qr buttons to adjust the playback speed. No sound is
played.)
Skip Backward* (To continue skipping backward, keep holding down the m
button.)
Previous Frame (For fast-rewind, keep holding down the m button.)
Next Frame (For fast-forward, keep holding down the m button.)
Skip Forward* (To continue skipping forward, keep holding down the m
button.)
*
Shown when the camera is connected ta ictBridge-compatible printer
(p. 177).
c
* Displays the frame approx. 4 sec. e or fter the current frame.
• To skip forward or back durie playback, press the qr buttons.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 3
Functions and Menu Tables
Functions Available in Each Shooting Mode
Shooting Mode
4
A
G
I
Function
Exposure Compensation (p. 103)
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
–
{
–
{
–
{
–
{
–
1
{
–
{
{
{
{
{
–
{
{
–
{
–
{
–
{
–
Tracking AF (p. 56)
e
u
{
{
–
–
–
–
{
{
{
{
{
{
{
–
{
{
–
{
{
–
{
{
–
h
Z
!
*2
{
–
{
–
{
–
{
–
{
–
{
–
No Information
Display
{
{
{
{
{
{
{
–
–
–
–
Screen Display (p. 36)
Information Display
{
{
{
{
*1 FE lock not available in ! flash mode.
*2 Not available, but switches to Z in some cases.
*3 Not available, but switches to Z when the flash
20D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Functions and Menu Tables
4
T Y
S
P
N
x v
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
–
–
–
–
{
–
{
–
–
–
{
–
–
–
–
–
{
{
{
–
{
{
–
{
{
{
{
–
{
{
–
{
{
–
{
{
–
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
–
{
{
–
{
{
–
{
{
–
–
{
{
–
{
{
–
{
{
–
{
{
–
–
–
–
–
–
{
*3
{
{
{
{
{
–
–
–
–
–
–
–
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
{
{
{
{
{
–
–
–
–
–
{
{
{
{
–
{
{
{
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{ Avable or set automatically. – Not available.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 5
Functions and Menu Tables
FUNC. Menu
Shooting Mode
4
A
G
I
Function
{
–
{
{
{
{
{
{
{
–
{
–
{
–
{
–
{
–
Metering Method (p. 104)
{
{
{
{
{
{
1
*
1
*
*
–
{
{
–
–
{
{
{
2
*
{
–
{
{
{
–
{
{
{
–
{
–
{
–
{
{
{
–
{
{
{
–
{
{
{
–
White Balance (p. 106)
3
–
–
–
Underwater White Balance Compensation (p. 80)
–
–
–
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
–
{
–
{
–
{
–
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
–
{
–
{
–
]
[
$
4
5
Delay*
–
–
–
Self-Timer Settings (p. 53)
Shots*
–
–
–
{
–
{
–
{
–
{
–
{
{
{
{
–
–
{
{
{
{
–
{
–
–
–
–
W
Still Image Aspect Ratio (p. 67)
{
{
{
–
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
–
{
–
Resolution (p. 68)
–
{
–
{
{
{
{
{
{
–
{
–
{
–
–
{
–
{
–
{
–
–
Compression (p. 119)
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
Movie Quality (p. 71)
*1 White balance is not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.
*3 Not available in x or v.
*4 Cannot be set to 0 seconds in modes without selection of the number of shots.
*5 One shot (cannot be modified) in modes without selection of the number of shots.
20D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Functions and Menu Tables
4
T Y
S
P
N
x v
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
–
–
–
–
–
{
{
{
–
{
{
{
–
{
–
{
{
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
–
–
–
–
–
–
–
–
–
–
{
{
{
–
–
–
–
–
–
–
–
–
–
–
–
–
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
–
{
{
–
{
–
{
–
{
–
{
–
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
–
{
{
{
–
{
{
–
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
–
–
–
–
{
–
{
–
{
–
–
{
–
–
{
–
{
–
{
*6
{
–
{
–
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
{
–
{
{
{
{
–
–
–
–
–
–
{
{
{
–
–
–
–
–
{
–
–
{
–
{
–
{
–
{
{
–
{
{
–
{
{
–
–
–
{
–
–
{
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
{
–
{
–
{
–
{
–
{
–
{
–
–
–
–
–
–
–
–
–
–
–
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
–
{
–
{
–
*7
*7
–
{
–
–
–
–
{
*6 Only
and
are available.
{ Available or set automatically. – Not available.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 7
Functions and Menu Tables
4 Shooting Menu
Shooting Mode
4
A
G
I
Function
1
Face AiAF*
{
*2
–
–
–
{
{
{
{
{
{
{
{
–
{
{
{
–
{
{
{
{
{
{
{
{
–
–
–
–
{
–
–
–
–
{
–
–
–
–
{
–
–
–
–
Tracking AF
Center
Normal
Small
Standard
3
{
{
–
{
{
{
{
{
{
{
Off
{
Digital Zoom (p. 51)
Digital Tele-converter
–
{
–
–
–
–
–
–
(1.6x/2.0x)
On
Off
On
Off*4
On
Off
Red-Eye
Corr.
{
{
–
{
{
{
{
{
{
{
{
{
–
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
–
{
{
{
–
{
{
–
{
{
–
{
{
–
{
{
{
{
{
{
{
–
{
{
{
{
{
AF-Point Zoom (p. 73)
Servo AF (p. 115)
AF-assist Beam (p. 75)
On
Off
{
{
{
Red-Eye
Lamp
Off
{
{
{
{
{
{
{
{
Auto
Off
On/ff
Off/2 – 0 ec./Hold
Off
Detailed/Focus Check
On
Off
On
{
–
{
{
–
{
{
–
–
{
–
–
{
–
–
{
–
–
{
–
–
{
–
i-Contrast (p. 105)
Hg Lamp Corr. (p. 70)
Review (p. 76)
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
Review Info (p. 76)
Blink Detection (p. 74)
Grid Lines (p. 72)
Off
Off
Contin-
uous
{
{
{
{
{
{
{
{
{
{
{
{
{
{
IS Mode
Shoot
Only
–
–
On
Off
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
Powered IS
Off
Date Stamp (p. 55)
Date/Date & Time
{
*1 Operation when no faces are detected varies by shooting mode.
*3 Available when the AF frame is set to [Center].
*4 [On] when subject movement is detected in A mode.
20D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Functions and Menu Tables
4
T Y
S
P
N
x v
{
{
{
{
{
–
{
–
–
–
–
{
{
{
{
{
–
–
–
{
{
–
–
–
–
–
–
{
–
{
{
{
–
{
–
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
{
{
{
{
{
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
–
{
{
–
{
–
{
–
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
–
{
–
{
–
{
–
{
{
{
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
{
{
–
{
{
{
–
–
{
–
{
{
{
–
{
{
{
{
{
{
{
{
–
{
–
{
{
{
–
–
{
–
{
{
{
–
–
{
–
{
{
{
–
–
{
–
{
{
{
–
{
{
{
{
{
{
–
{
{
{
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
–
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{
{
{
–
{
–
{
{
{
–
–
{
–
{
{
{
–
–
{
–
{
{
{
–
–
–
{
{
{
{
{
{
{
{
–
–
–
–
{
{
{
{
{
{
–
{
{
{
–
–
{
–
–
–
{
–
{
–
–
–
{
–
–
{
–
–
{
–
–
{
–
{
–
–
{
–
–
{
–
{
–
–
–
{
–
–
{
–
–
{
–
–
–
–
–
–
–
{
{
{
–
{
{
{
{
{
{
{
–
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{
{
{
{
{
–
{
{
{
{
{
{
{
–
{
{
{
{
{
{
–
{
{
{
{
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{
{
{
{
–
–
{
–
–
–
–
–
{
{
{
{
–
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
–
–
{
{
{
–
{
–
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{
–
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{ Available or set automatically. – Not available.
-
-
recorded in still images.
will not be recorded in movies.
,
,
, x, or v, but they will be
or , and they
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 9
Functions and Menu Tables
3 Set up Menu
Item
Ref. Page
Item
Lens Retract
Ref. Page
Mute
Volume
Power Saving
Time Zone
Sound Options
Hints & Tips
Date/Time
LCD Brightness
Start-up Image
Format
Video System
Ctrl via HDMI
Eye-Fi Settings
Language
File Numbering
Create Folder
Reset All
1 Playback Menu
Item
Ref. Pag
Item
Trimming
Ref. Page
Slideshow
Erase
Resize
Protect
Rotate
My Colors
Face ID Info
Scroll Display
Group Images
Auto Rotate
Resume
Favorites
My Category
Photobook Set-up
i-Contrast
Red-Eye Correction
Transition
21D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Functions and Menu Tables
2 Print Menu
Item
Ref. Page
–
Item
Select All Images
Clear All Selections
Print Settings
Ref. Page
Print
Select Images & Qty.
Select Range
Playback Mode FUNC. Menu
Item
Ref. Page
Item
Ref. Page
Rotate
Play Movie
Print List
Protect
Favorites
Erase
Movie Digest Playback
Smart Shuffle
Imagearch
desho
Group Playback
y Category
Download from Www.Somanuals.com. All Manuals Search And Downloa2d1. 1
Index
G
P
H
I
Images
R
L
S
Screen
M
J Memory cards
Menu
Movies
Shooting
Download from Www.Somanuals.com. All Manuals Search And Downloa2d1. 3
Index
Software
T
U
V
Viewing
W
Z
21D4ownload from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Downloa2d1. 5
USA and Canada only:
The Lithium ion/polymer battery that powers the product is
recyclable.
Please call 1-800-8-BATTERY for information on how to recycle
this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material - special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Trademark Acknowledgments
•
•
•
The SDXC logo is a trademark of SD-3C, LLC
This device incorporates exFAT technology licnsed from Microsoft.
HDMI, the HDMI logo and High-DefinitMultimedia Interface are
trademarks or registered trademof DMI Licensing LLC.
The iFrame logo and the iFrame ol are trademarks of Apple Inc.
•
About MPEG-4 Licensing
This product is licensed under AT&T patents for the MPEG-4 standard and
may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and
non-commercial purpose or (2) by a video provider licensed under the AT&T
patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.
* Notice displayed in English as required.
21D6ownload from Www.Somanuals.com. All Manuals Search And Download.
FCC Notice
(Digital Camera, Model PC1733 systems)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class B
digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment ad receiver.
• Connect the equipment into an outlet on a rcuit erent from that to which the
receiver is connected.
• Consult the dealer or an experiendioV technician for help.
The cable with the ferrite coe providh the digital camera must be used with this
equipment in order to complwith Class B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified
in the manual. If such changes or modifications should be made, you could be required
to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
To ensure proper operation of this product, use of genuine Canon
accessories is recommended.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d1. 7
Battery Charger CB-2LD
IMPORTANT SAFETY INSTRUCTIONS-
SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE
INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug
adapter of the proper configuration for the power outlet, if needed.
Battery Charger CB-2LDE
The adapter can be used with a power supply between 100 and 240 V
AC.
Contact your Canon dealer for information about plug adapter for
overseas use.
For U.S.A. customers only: For areas e 120 V AC power is not
used, you will need a special plaptr.
For only United States
Use a UL listed, 1.8-3m(610ft), Type SPT-2 or NTSPT-2, AWG no.18
power supply cord, rated fo125V 7A, with a non-polarized NEMA
1-15P plug rated for 125V 15A.
Battery Charger CB-2LDE
In normal use, keep the LED side face-up.
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
• Canon reserves the right to change the contents of this guide at any
time without prior notice.
• Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
• The above items notwithstanding, Canon accepts no liability for
damages due to mistaken operation of the products.
CDD-E466-020
© CANON INC. 2012
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Beyonwiz MP3 Player DP H1 User Manual
Billy Goat Vacuum Cleaner HTR1803V User Manual
Blomberg Freezer KQD 1250 X User Manual
Blue Rhino Fire Pit WAD808WDNC User Manual
Bosch Power Tools Sander 1250DEVS User Manual
Briggs Stratton Air Cleaner 128600 User Manual
BRK electronic Fire Extinguisher FE5GO MN User Manual
Cecilware Blender Giant2 User Manual
Cecilware Fryer EL 6 User Manual
Chevrolet Automobile 2009 Aveo User Manual