Cover S810i USAGBR.fh8 29.7.2002 13:40 Page 1
Displays your heart rate as bpm and % of HRmax , average heart
rate and exercise duration.
COMPLETE HR
Quick Guide
Allow s you to set 7 exercise profiles™ for multi-phase exercise
sessions w ith HR target zones and recovery calculation. Records
complete files of the exercises.
Sig n a l/Lig h t
Up
•
•
move onward
Predicts your maximal oxygen uptake.
increase the
selected value
Reduces possible interference from other heart rate monitors.
St o p
Do w n
•
exit the
•
•
move backward
displayed mode
return to the
Time of day display
reduce the
selected value
•
Sports w atch features.
OK
•
•
start measuring the heart rate
lock in your selection
Beat to beat measurement, relaxation rate (indicates the state
of your physical recovery), online measurement w ith optional
Polar IR Interface™.
Ho w t o St a rt Me a su rin g Yo u r He a rt Ra t e (Ba sicUse )
1. Place the transmitter around your chest and wet the electrodes. Place the
receiver on your wrist.
Infra red communication allow s tw o-w ay exchange
of settings and exercise data w ith a PC.
2. Press and hold the OK button to start the measurement. The stopwatch and
the exercise recording start. Your heart rate will appear in about 15 seconds.
U S A
/
G B R
Ho w t o St o p Me a su rin g Yo u r He a rt Ra t e
U S E R ’S M A N U A L
™
1. Press the stop button. The stopwatch and other calculations stop. Heart rate
measurement continues but exercise data is not recorded into a file anymore.
2. Press the stop button again. The receiver returns to Time of Day display.
™
S 8 10 i
S 8 10 i
H E A R T R A T E M O N I T O R
H E A R T R A T E M O N I T O R
Download from Www.Somanuals.com. All Manuals Search And Download.
The Polar S810i and Polar Precision Performance™ software offer you various
ways to customize your exercise sessions so they meet your personal needs.
For example, you can build up exercise profiles to guide you through various
training sessions. Choose the functions that suit you best: OwnCal® calorie
calculation, timers or recovery calculation, etc. Monitor your fitness level, and any
long-term changes in it, by performing the quick and easy Polar Fitness Test™.
After training, you can review your exercise file and transfer it to your
computer for analysis with the software. Or, you can transfer your heart rate to
the computer in real time through an optional Polar IR Interface™. In addition,
you can perform an over training test, included in the software, for thorough
information about your body’s recovery.
Please read this manual carefully to familiarize yourself with the Polar heart
rate monitor. Here is where you can find the information you need to use and
maintain your equipment. The function road map on the front cover is a quick
guide to the versatile features of the Polar heart rate monitor; Please tear it off
and save it for your reference.
Please refer to the glossary for special terms, display symbols and text
explanations. The alphabetical index will help you quickly find answers to
any questions that you might encounter while using your Polar heart rate
monitor.
Thank you for choosing Polar!
S810i manual USA GBR A.pm6
1
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
A. Ge t t in g Go in g ....................... 5
Heart Rate Monitor Parts ........................ 5
Buttons and Their Functions ................... 6
Easy Start .................................................. 8
How to Prepare the Wrist Receiver ... 8
How to Put the Transmitter On .......... 9
How to Start Measuring
Your Heart Rate ................................... 9
How to Stop Measuring
Your Heart Rate ................................. 10
After Exercising .................................. 10
Modes and Their Functions ................... 11
Setting Profile Exercise ..................... 25
Setting Phases on/off .................... 25
Setting Interval Calculation ......... 26
Setting Interval Type ..................... 26
Setting Number of Intervals
and Recoveries ............................... 28
Turning Heart Rate Limits on/off .. 28
Setting Heart Rate Limits ............ 28
Setting Recovery Calculation ....... 29
Naming Profiles ................................. 30
Setting Recording Rate ......................... 31
Turning Functions on/off ....................... 32
OwnCal Calorie Counter on/off ....... 32
Fitness Test on/off .............................. 32
Predicted Maximum
Heart Rate on/off ............................... 33
Online Recording to
Computer on/off ................................ 33
Monitor Settings .................................... 34
Turning Activity/Button
Sound on/off ...................................... 34
Selecting Measuring Units ................ 34
Turning Help on/off ........................... 35
Watch Settings ....................................... 36
Setting Alarm ..................................... 36
Setting Time of Day ........................... 36
Setting Date ....................................... 37
Turning Reminders on/off ................. 37
Setting Tips ............................................. 38
Swap Time 1 or Time 2 ...................... 38
Shortcut to Watch Settings ............... 38
Swap Measuring Units ...................... 38
Swap Date, User ID Number,
Starting an Exercise Profile ................... 46
Exercise Phase .................................... 47
Interval Period ............................... 47
Recovery Period ............................. 48
Interrupting an Exercise Profile ............ 49
Exercising with BasicSet ........................ 49
Starting the Timers ............................ 49
Swapping the Heart Rate Limits ...... 49
Starting the Recovery Calculation ... 50
Stopping the Exercise ............................ 50
Tips During Exercise ............................... 50
Swapping the Exercise Type ............. 50
Swapping the Recording Rate
of the Exercise .................................... 50
Resetting the Interval or
Recovery Calculation of
an Exercise Profile ............................. 50
Interrupting an Interval or Recovery
Calculation of an Exercise Profile .... 51
Interrupting a Phase of
an Exercise Profile ............................. 51
Heart Touch Function ....................... 51
User Name and Logo ......................... 38
C. Exe rcise ................................ 39
Heart Rate Measure Mode .................... 39
Exercise Recording Mode ...................... 41
Turning Heart Rate
Zone Alarm on/off ............................. 41
Illuminating the Display .................... 42
Storing Lap and Split Time ............... 42
Pausing the Exercise .......................... 43
Swapping the Displayed
B. Ho w t o En t e r Se t t in g s ........ 14
User Information Settings ..................... 16
Exercise Settings ..................................... 20
Selecting Exercise Type .......................... 22
Setting BasicSet exercise ................... 22
Setting Timers ................................ 23
Setting Heart Rate Limits ............. 23
Turning Heart Rate Limits on/off ... 23
Setting Recovery Calculation ....... 24
Exercise Information ......................... 43
Resetting the Stopwatch to Zero ..... 45
S810i manual USA GBR A.pm6
2-3
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
A. GETTING GOING
He a rt Ra t e Mo n it o r
Pa rt s a n d Th e ir
Fu n ct io n s
D. Ho w t o Re ca ll
F. Po la r Fit n e ss Te st ................. 65
OwnIndex ............................................... 65
Predicted Maximum Heart Rate ........... 67
Fitness Test Settings ............................... 68
Carrying out the Test ............................. 68
Update OwnIndex and HRmax -p ............ 70
Fitness Classes ......................................... 71
Tra in in g In fo rm a t io n ......... 52
Exercise Time .......................................... 54
Recovery Information of
BasicSet Exercise ..................................... 55
Heart Rate Limits ................................... 55
Exercise Time within, above and below
the Heart Rate Zones ............................. 55
Calorie Expenditure ............................... 55
Cumulative Calorie Count ..................... 55
Cumulative Exercise Time Count .......... 56
Profile Exercise Information ................. 56
Lap Information ..................................... 58
Recorded Heart Rate Samples .............. 59
Records File ............................................. 59
Updating the Cumulative
The elastic strap holds the
transmitter comfortably,
yet firmly, in the correct
position.
G. Ca re a n d Ma in t e n a n ce ...... 73
H. Pre ca u t io n s ......................... 75
The transmitter detects
your heart rate and
transmits it to the wrist
receiver.
I. Fre q u e n t ly Aske d
Qu e st io n s ............................ 79
J. Te ch n ica l Sp e cifica t io n s .... 83
Counts to Zero ........................................ 59
Deleting a File ........................................ 60
Deleting all Files ..................................... 60
K. Lim it e d Po la r in t e rn a t io n a l
g u a ra n t e e ........................... 86
The wrist receiver displays
your heart rate and other
data during exercise.
E. Co n n e ct io n t o Co m p u t e r .... 61
Downloading Training
Data to Computer .................................. 61
Uploading Settings
L. Discla im e r ........................... 87
Enter your personal
settings into the receiver
and analyze the exercise
files after you’re done.
M. Po la r Glo ssa ry ..................... 88
Display Symbols ...................................... 90
Display Texts ........................................... 91
Index ........................................................ 95
from Computer ...................................... 62
A 5
S810i manual USA GBR A.pm6
4-5
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and Their Functions
SIGNAL/
Sig n a l/ Lig h t
Re se t
Turns the beep on or off.
Up
Moves to the following
mode. Increases the
selected value.
LIGHT
Turns the backlight on.
RESET
STOP
Resets the heart rate monitor.
Do w n Returns to the previous
mode. Decreases the
selected value.
St o p Re t u rn - Stops measuring the heart rate.
Exits the displayed mode and returns to
the previous mode level.
Returns to the Time of Day display
from any mode by pressing and
holding the stop button.
OK
Acce p t - Starts measuring the heart rate (start).
Enters the displayed mode shown on
the lower level (start). Locks in your
selection (ok). Records lap information
(lap). The Help text (start, ok or lap)
that appears on the display above the
button indicates its use.
OK
Use fu l Tip s
•
Briefly pressing a button (approximately 1 second) will do different
things than pressing and holding the button for a longer period of
time (approximately 2 to 5 seconds). If your press the button for a
longer period of time, you can use shortcuts.
•
•
•
The buttons are slightly stiffer than those of an ordinary watch to
prevent them from being pressed accidentally.
You can always return to the Time of Day display from the Options
setting or File recalling loops by pressing and holding the stop button.
See the glossary for display symbols and text interpretation.
A 6
A 7
S810i manual USA GBR A.pm6
6-7
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Start
Ho w t o Pre p a re t h e Wrist Re ce ive r
Ho w t o Pu t t h e Tra n sm it t e r On
1. Since the display is blank when the receiver leaves the
factory, you have to activate the wrist receiver by pressing
the OK button twice, after which the Time of Day display
appears. This is a one-off procedure; once you have turned
on your receiver you can not turn it off anymore.
2. You may start measuring your heart rate right away
using the default settings. However, the following
settings are ones that it would be useful to change as
soon as possible: Time of Day (see section " Watch
settings" ) and personal user settings (see section " User
information settings" ).
1. Attach the transmitter to the elastic strap.
2. Adjust the strap length to fit snugly and
comfortably. Secure the strap around your
chest, just below the chest muscles, and
buckle it.
3. Lift the transmitter off your chest and
m o ist e n t h e g ro o ve d e le ct ro d e a re a s
on the back.
4. Check that the wet electrode areas are firmly
against your skin and the Polar logo is in a
central, upright position.
3. The receiver has various functions that you can use
according to your personal training needs. For more
information, see section “Modes and their functions”.
You can either manually enter the settings by pressing
the receiver buttons or you can define your settings
using Polar Precision Performance software, after which
the data should be transferred from your computer to
the wrist receiver.
Ho w t o St a rt Me a su rin g Yo u r He a rt Ra t e
1. Begin with the display that shows
the time of day.
2. Keep the wrist receiver within
3 feet/ 1 meter of your transmitter.
3. Check that you are not near people that have
heart rate monitors, high voltage power lines,
televisions, mobile phones or other sources of
electromagnetic disturbance.
4. Wear the wrist receiver as you would wear an ordinary
watch. If you go biking, we recommend attaching the
wrist receiver to a Polar Bike Mount™.
A 8
A 9
S810i manual USA GBR A.pm6
8-9
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the OK button to start measuring your heart rate. A heart symbol
will start flashing and your heart rate (beats per minute) will appear in
a maximum of 15 seconds.
Modes and Their Functions
Your receiver has six main modes: Time of Day, Exercise, File, Options, Fitness
test and Connection. The modes offer you the following features:
5. Press OK again. The stopwatch starts running and you can start
exercising. The exercise data will only be stored in a file if you have
turned the stopwatch on.
1. TIME OF DAY
•
•
•
12 h or 24 h time, alarm, date and weekday
two time options
Ho w t o St o p Me a su rin g Yo u r He a rt Ra t e
backlight
1. Press the stop button. The stopwatch and other calculations stop.
The heart rate measuring continues, although exercise data is no longer
recorded.
In addition, the following functions can be uploaded from a computer
and utilized:
2. Press the stop button again. The heart rate measuring stops.
The receiver shows the Time of Day display again.
•
•
7 alarm sound reminders
your personal logo, user number or user name
Aft e r Exe rcisin g
2. EXERCISE
There are three optional exercise modes:
1. Carefully wash the transmitter with a mild soap and water solution.
2. Rinse it with pure water.
•
•
•
simple BasicUse function without settings or exercise guiding functions
Programmable Exercise Profile function with six exercise phases
programmable BasicSet function with three adjustable target heart rate
limits, timers and a recovery period
3. Dry the transmitter carefully with a soft towel.
4. Store the transmitter in a clean and dry place. Dirt impairs the conductivity
and functioning of the transmitter. Sweat and moisture can keep the
electrodes wet and the transmitter activated, which shortens battery life.
The following are in use during all three different exercise modes:
•
•
•
•
three adjustable display options
current exercise time (stopwatch)
time of day
lap and split time as well as the lap number
A 10
A 11
S810i manual USA GBR A.pm6
10-11
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
•
current heart rate, average heart rate or a reading of your maximum
heart rate in percentages
exercise phases. Each phase may include heart rate limits, intervals and
recovery periods.
•
•
calorie count for an exercise session
•
•
•
heart rate for 1 minute, 15 seconds, 5 seconds or each heart beat
is recorded.
graphic and numeric display options of relaxation rate
OwnCal calorie counter, fitness test, predicted maximum heart rate and
online measurement*
3. FILE
•
up to 99 exercise files and one re-settable records file, which keeps track
user-specific information: weight, height, date of birth, gender, activity
level, maximum heart rate, maximal oxygen uptake and baseline for
relaxation rate
of cumulative calories and exercise time
date and starting time of the exercise
total exercise time
•
•
•
•
•
activity/button sound, measurement units and Help function
alarm, time of day, date and reminders
average, maximum and minimum heart rate readings for
the exercise session
•
•
•
•
•
•
•
•
recovery information of BasicSet exercise
heart rate limits used during exercise
time spent in, above and below your target zones during exercise
OwnCal calorie expenditure
5. FITNESS TEST
In this mode you can:
•
•
•
perform the Polar Fitness Test
recall your latest test results; OwnIndex and HRmax-p values
update your user information to reflect your most recent OwnIndex and
HRmax-p values
cumulative calorie expenditure
cumulative exercise time
profile information on the exercise phases
lap information: best lap time; up to 99 lap and split times; current,
average and maximum heart rate for each lap
heart rate samples recorded in the preset recording rate
6. CONNECTION
In this mode you can:
•
•
download recorded exercise information to your computer for detailed
analysis with Polar Precision Performance software version 3 or later
upload your receiver settings from your computer to receiver with Polar
Precision Performance software version 3 or later
4. OPTIONS
•
•
BasicUse with no settings, BasicSet with three heart rate limits, timers
and a recovery period or seven programmable exercise profiles with
* An optional Polar IR Interface is required.
A 12
A 13
S810i manual USA GBR A.pm6
12-13
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Of Day
File
Opt ion s
Fit. Test
User Set
Connect
B. HOW TO ENTER SETTINGS
Exercise Set
Memory Set
Function Set
Monitor Set
Watch Set
1. In the Time of Day display, scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Scroll up or down until the desired setting mode is displayed.
4. Press OK to start the settings.
This section describes how to manually enter
settings by pressing the receiver buttons. How ever,
The receiver offers you a faster w ay as w ell:
prepare your settings w ith Polar Precision
Performance softw are and upload them to your
receiver from your computer. See chapter
“Uploading settings from computer”.
•
•
•
•
•
•
Move forward and backward by using the up or down buttons.
Press OK to start adjusting the value.
Scroll up or down to adjust the value.
Press OK to lock in your selection.
Move backward to the previous setting level by pressing the stop button.
To return to the Time of Day display, wherever you are in the Options
settings: Press and hold the stop button.
•
•
The digits run faster if you press and hold the up or down button as you
adjust the value. Release the button when approaching the desired value.
On the display each function is presented by an abbreviated text.
A flashing block on the display indicates how far you are in the
setting mode.
B 14
B 15
S810i manual USA GBR A.pm6
14-15
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Da t e o f Birt h (Birthday)
User Information Settings
7. Scroll up or down to select your month / day
of birth. Press OK.
Units 1: setting order
is day - month - year.
Units 2: setting order
is month - day - year.
Op t io n s
8. Day / Month appears. Scroll up or down to
select the day / month. Press OK.
9. Year appears. Scroll up or down to adjust
the year of birth. Press OK.
User Set
lbs/
kg
feet
inch/ cm
Birthday
Sex
Activity
HRmax
VO2max
Baseline
In the User Set loop you can move forward only by pressing OK.
Se x
Measuring units depend on the settings in Options/ Monitor Set/
Unit 1 or Unit 2.
10. Scroll up or down to select your gender. Press OK.
Act ivit y Le ve l (Activity)
Un it s 1
Un it s 2
11. Scroll up or down to select your activity level for Polar Fitness Test.
Press OK.
Weight
kg
lbs
Height
cm
ft/ inch
Date of Birth setting order
day - month - year
month - day - year
Assess your long-term physical activity level. Do not change your activity
level description if your regular exercise habits have changed during the
last six months.
1. In the Time of Day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Scroll up or down until USER SET is displayed.
Low
You do not participate regularly in programmed recreational sport or
heavy physical activity. Ex. you walk only for pleasure or occasionally
exercise sufficiently to cause heavy breathing or perspiration.
4. Press OK to start the user information settings.
We ig h t (lbs or kg)
Middle You participate regularly in recreational sports. Ex. you run 3-6
miles / 5-10 km per week or spend 1/2–2 hours per week in
comparable physical activity or, your work requires modest physical
activity.
5. Scroll up or down to adjust your weight. Press OK.
Press and hold signal/
light button to change
the units for weight or
height.
He ig h t (ft/ inch or cm)
6. Scroll up or down to adjust your height. Press OK.
B 16
B 17
S810i manual USA GBR A.pm6
16-17
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
High
Top
You participate regularly, at least 3 times a week, in heavy physical
exercise. Ex. you run 6-12 miles / 10-20 km per week or spend 2-3
hours per week in comparable physical activity.
Ba se lin e fo r re la xa t io n ra t e
16. Scroll up or down to select your relaxation rate baseline. Press OK.
USER SET appears.
You participate regularly in heavy physical exercise at least 5 times a week.
Ex. you exercise to improve performance for competitive purposes.
The degree of relaxation rate is highly individual, therefore compare the
value to your own baseline. To find out your personal baseline relaxation
rate, you need to measure your relaxation rate in a recovered state. Follow
the instructions below or refer to Polar Precision Performance software to
easily determine your relaxation rate baseline. See also " Display Texts" /
" RLX, Relaxation rate" section.
Ma xim u m He a rt Ra t e Va lu e (HRmax
)
12. Your age-predicted maximum heart rate value is displayed as a default
setting when you set this value for the first time. If yo u kn o w yo u r
e xa ct clin ica lly t e st e d cu rre n t m a xim u m h e a rt ra t e va lu e , set the
value by scrolling up or down.
1. Before the measurement,
Re la xa t io n Ra t e
relax for 2-3 minutes.
Tim e
0:15
0:30
0:45
1:00
1:15
1:30
1:45
2:00
Exam ple Your Value
13. Press OK.
2. Start measuring your heart rate
by pressing and holding the
OK button.
1
2
3
4
5
6
7
8
32
33
35
34
33
35
36
33
271
If you do not know this value, update it in the Fitness Test mode after
having carried out the Polar Fitness Test.
3. Press the up button until
relaxation rate value (RLX) in
milliseconds is displayed
Ma xim a l Oxyg e n Up t a ke Va lu e (VO2max
)
14. The wrist receiver suggests value 35 for females and value 45 for males
as a default setting when you set this value for the first time. If yo u
kn o w yo u r e xa ct clin ica lly t e st e d cu rre n t m a xim a l o xyg e n u p t a ke
va lu e , set the value by scrolling up or down.
in the upper row.
Or, if INT is displayed in the
upper row press the down
button first and then up
15. Press OK.
button until relaxation rate
value (RLX) is displayed.
If you do not know this value, update it in the Fitness Test mode after
having carried out the Polar Fitness Test.
4. Write down your relaxation rate
each 15 seconds for 2 minutes.
5. Sum up the eight relaxation
values and divide them by eight
to obtain the average value. This
is your baseline relaxation rate.
/ 8
34
/ 8
Ba se lin e
B 18
B 19
S810i manual USA GBR A.pm6
18-19
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
For getting the most of your relaxation rate measure your baseline
relaxation rate:
•
•
split and lap times
relaxation rate
•
in the environment which best represents the time you will be using the
relaxation rate.
Additionally, you can follow calories of your exercise session and percentage
of your maximum heart rate, if you have set all the user information and
turned the OwnCal calculator on.
•
always in the same way (Ex., laying down), place and time.
Update the baseline value once a month or whenever you want to refer to
your value in different situations.
Exe rcise Pro file (E1-E7)
Exercise profile will guide you through the exercise with up to six pre-
programmable phases. You can name the exercise profiles, Ex., by the
exercise type. Profiles can be used for versatile exercises where different
phases are successive, Ex., in interval training.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
During exercise, you can see the same optional values as in the BasicUse
mode. Heart rate limits and up to 30 interval and recovery periods can be set
for each phase.
Exercise Settings
When you start setting exercise preferences, you first select whether you
want to pre-programm an exercise profile or a BasicSet or exercise with the
BasicUse option.
Ba sicSe t (E8)
BasicSet is a pre-programmable exercise set, but simpler than an exercise
profile. There are no phases available although three timers and a recovery
period help you split up the exercise session. The three adjustable heart rate
limits allow you to monitor your workouts, securing the correct intensity.
During exercise, you can see the same optional values as in the BasicUse
mode.
Ba sicUse (E0)
BasicUse is a simple mode for exercising. You do not have to do any settings
before exercising with this Exercise mode. There are no heart rate limits in
use in this mode. While exercising, you can see the following optional values
on the display:
•
•
•
current heart rate or average heart rate of the exercise
stopwatch
time of day
B 20
B 21
S810i manual USA GBR A.pm6
20-21
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Se le ct in g Exe rcise Typ e
Se t t in g Tim e rs
1. In the Time of Day display scroll up or
down until OPTIONS is displayed.
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until desired Timer is displayed. Press OK to start
setting the timer.
Opt ion s
Exercise Set
6. Scroll up or down to turn the timer on or off. Press OK.
OFF: skip steps 7-8.
BasicUse
E0
Profil
E1
BasicSet
E8
3. Press OK to start the exercise settings.
BasicUse E0, Profil E1-E7 or BasicSet E8 is
displayed.
7. Scroll up or down to adjust minutes. Press OK.
8. Scroll up or down to adjust seconds. Press OK.
Repeat until you have set all timers you want to use.
4. Scroll up or down until the desired exercise type is displayed. Press OK.
If you chose BasicUse (E0): to return to the Time of Day display, press
and hold the stop button and skip the rest of the exercise settings.
You should select the timers on sequentially. Ex. you cannot set timer 2
on if timer 1 is off.
If you chose Profil (E1-E7): continue to the step 5 of the chapter " Setting
profile exercise/ Setting phases on/off" .
Se t t in g He a rt Ra t e Lim it s fo r t h e Ba sicSe t
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until desired Limits is displayed.
If you chose BasicSet (E8): continue setting the functions for the BasicSet.
6. Press OK to start setting the heart rate limits.
7. Lim High appears. Scroll up or down to adjust your upper limit. Press OK.
8. Lim Low appears. Scroll up or down to adjust your lower limit. Press OK.
Repeat until you have set all heart rate limits you want to use.
Se t t in g Ba sicSe t Exe rcise
Op t io n s
Exercise Set
BasicSet (E8)
Tu rn in g He a rt Ra t e Lim it s fo r t h e Ba sicSe t o n /o ff
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until desired Limits is displayed.
6. Press and hold the signal/light button to turn limits on or off.
Release.
Timer 1
Timer 2
Timer 3
Limits 1
Limits 2
Limits 3
Recovery
Timer
Hr
B 22
B 23
S810i manual USA GBR A.pm6
22-23
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Pro file Exe rcise
Op t io n s
Se t t in g Re co ve ry Ca lcu la t io n fo r Ba sicSe t
A. Time-based recovery
Ends your recovery as you
reach the preset time.
Recovery On/OFF
Timer Hr
Exercise Set
B. Heart-rate-based recovery Ends your recovery as you
Profil 1-7 (E1-E7)
reach the preset heart rate.
Phase 1-6 On/OFF
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Recovery is displayed.
6. Press OK to start setting the recovery on or off.
On/OFF starts to flash.
Int. On/OFF
Reco On/OFF
Timer Hr
Limits On/OFF
7. Scroll up or down to set the recovery on or off. Press OK.
OFF: Skip steps 8-10.
Int. Type
Repeat
Timer
Hr
Manual
1-30/ Cont
On: TIMER or Hr starts to flash.
8. Scroll up or down to select the time-based or heart-rate-based
recovery. Press OK.
1. In the Time of Day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Press OK to start the exercise settings. BasicUse E0, Profil E1-E7
or BasicSet E8 is displayed.
A. RecoTime is displayed.
9. Scroll up or down to adjust minutes. Press OK.
10. Scroll up or down to adjust seconds. Press OK.
Recovery TIMER appears.
4. Scroll up or down until the desired Profil E1-E7 is displayed. Press OK.
Or
B. RecoHr is displayed.
See an example of an exercise profile from chapter " Starting an exercise
profile" .
9. Scroll up or down to adjust the heart rate. Press OK.
Recovery Hr appears.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
B 24
B 25
S810i manual USA GBR A.pm6
24-25
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g In t e rva l Typ e (Int. Type)
Se t t in g Ph a se s o n /o ff
Select the interval type that will be used to end the interval calculation
from three optional types:
Phase 1-6 On/OFF
Int. On/OFF
Reco On/OFF
Limits On/OFF
A. Time-based interval
Ends your interval when you have
used the selected time.
If you start from the Time of Day display, repeat steps 1-4.
B. Heart-rate-based interval Ends your interval as you reach the
selected heart rate.
5. Scroll up or down until the desired phase number is displayed.
6. Press OK to start setting the phase. On/OFF starts to flash.
7. Scroll up or down to set the phase on or off. Press OK. On: Int. and the
phase number (P1) are displayed. OFF: continue setting the other phases
from step 5. To continue your settings, press the stop button. To return
to the Time of Day display, press and hold the stop button.
When selecting heart-rate-based interval,
recovery calculation must be set on.
C. Manual interval
End the interval by pressing and holding OK.
If you start from the Time of Day display, repeat steps 1-10.
11. Start with the display showing Int. Type.
12. Press OK to start setting the interval type. TIMER, Hr or MANUAL starts
to flash.
You can not set the phase on, if you have not set the interval or recovery
calculation on.
Se t t in g In t e rva l Ca lcu la t io n (Int.)
13. Scroll up or down to select the interval type that will be used to end
the interval. Press OK.
Int. On/OFF
Repeat
Int. Type
If you chose manual interval type (MANUAL) skip steps 14 - 15.
Timer
Hr
Manual 1-30/ Cont
A. Time-based interval
14. Scroll up or down to adjust minutes. Press OK.
15. Scroll up or down to adjust seconds. Press OK.
TIMER appears.
If you start from the Time of Day display, repeat steps 1-7.
8. Start with the display showing Int. (= interval).
9. Press OK to start setting the interval. On/OFF starts to flash.
10. Scroll up or down to set the interval on or off. Press OK.
On: Int. Type is displayed.
Or
B. Heart-rate-based interval
14. Scroll up or down to adjust the heart rate that will end your interval.
Press OK. Hr appears.
OFF: continue setting the recovery or heart rate limits for the phase. To
continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
B 26
B 27
S810i manual USA GBR A.pm6
26-27
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g t h e Nu m b e r o f In t e rva ls a n d Re co ve rie s (Repeat)
If you start from the Time of Day display, repeat steps 1-10.
You can set up to 30 intervals and recoveries (if set on) for each phase.
11. Scroll up or down until Repeat is displayed.
Se t t in g Re co ve ry Ca lcu la t io n fo r Pro file (Reco)
A. Time-based recovery
Ends your recovery as you
reach the preset time.
Reco On/OFF
Timer Hr
12. Press OK to start setting the number.
B. Heart-rate-based recovery Ends your recovery as you
13. Scroll up or down to adjust the number. If you do not know in advance
the precise number of the intervals select continuous interval by pressing
reach the preset heart rate.
and holding the up or down button until Cont
is displayed. If you
If you start from the Time of Day display, repeat steps 1-7.
choose Cont, the intervals and recoveries will succeed until you manually
stop the exercise or until 30 intervals and recoveries have been made.
Press OK.
8. Scroll up or down until Reco and the number of the phase (P1) are
displayed.
9. Press OK to start setting recovery on or off. On/OFF starts to flash.
10. Scroll up or down to turn the recovery on or off. Press OK.
On: TIMER/ Hr is flashing.
Continue setting the recovery or heart rate limits by pressing the stop
button. Int is displayed. To return to the Time of Day display, press and hold
the stop button and skip the rest of the exercise settings.
OFF: continue setting the interval calculation or heart rate limits for the
phase. To continue your settings, press the stop button. To return to
the Time of Day display, press and hold the stop button.
11. Scroll up or down to select time-based or heart-rate-based recovery.
Press OK.
Tu rn in g He a rt Ra t e Lim it s fo r Pro file o n /o ff
If you start from the Time of Day display, repeat steps 1-7.
8. Scroll up or down until Limits is displayed.
9. Press and hold the signal/light button to turn limits on or off. Release.
A. RecoTime is displayed.
Se t t in g He a rt Ra t e Lim it s fo r Pro file
12. Scroll up or down to adjust minutes. Press OK.
If you start from the Time of Day display, repeat steps 1-7.
8. Scroll up or down until Limits is displayed.
13. Scroll up or down to adjust seconds. Press OK.
Reco appears.
9. Press OK to start setting the limits.
Or
10. Lim High appears. Scroll up or down to adjust your upper limit. Press OK.
11. Lim Low appears. Scroll up or down to adjust your lower limit. Press OK.
Heart rate limits are used in the interval and recovery calculations.
B 28
B 29
S810i manual USA GBR A.pm6
28-29
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
B. RecoHr is displayed.
Setting Recording Rate
12. Scroll up or down to adjust the value. Press OK.
Reco appears.
You can program your receiver to record data in each heart beat, 5, 15 or 60
seconds intervals.
If you set both heart-rate-based interval and recovery, adjust your
recovery heart rate to be smaller than the interval heart rate.
1. In the Time of Day display scroll up or
Op t io n s
down until OPTIONS is displayed.
2. Press OK to enter the Options mode.
Memory Set
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
EXERCISE SET is displayed.
3. Scroll up or down until MEMORY SET
Rec. Rate RR / 5 Sec / 15 Sec / 60 Sec
is displayed.
Na m in g Pro file s
4. Press OK to start the memory settings. Rec. Rate is displayed.
5. Scroll up or down to select the desired recording rate. As you change the
recording rate you can see the memory left in the lower row. Press OK.
You can name the profiles, with seven letters, numbers or punctual marks.
The available digits are: 0-9, space, A-Z, a-z, - % / ( ) * + : ?.
1. In the Time of Day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Press OK. E0 - E8 is displayed.
The recording time depends on the selected recording rate. The use of lap
recording and profile function reduces the maximum exercise times. When
the memory becomes full, you can continue exercising but the exercise is no
longer recorded.
4. Scroll up or down until desired profile (E1 - E7) is displayed.
5. Press and hold signal/light button. Adjustable letter is flashing.
6. Scroll up or down to select the desired mark. Press OK.
7. Repeat previous step until you have chosen all 7 letters.
Re co rd in g ra t e
Ma xim u m e xe rcise t im e
RR (Each heart
100 % is approx. 30 000 heart beats.
beat is recorded) The memory left is displayed in percentages
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
5 s
44 h 13 min
15 s
60 s
99 h 59 min in one file and total 120 h is approx. 5 days
99 h 59 min in one file and total 500 h is approx. 20 days
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
B 30
B 31
S810i manual USA GBR A.pm6
30-31
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre d ict e d Ma xim u m He a rt Ra t e o n /o ff (HRmax-p)
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until HRmax-p is displayed.
Turning Functions on/off
Op t io n s
1. In the Time of Day display scroll up or
down until OPTIONS is displayed.
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
6. Press OK to start setting the HRmax-p. On/OFF starts to flash.
7. Scroll up or down to set the HRmax-p on or off. Press OK.
Function Set
OwnCal
On/OFF
Fit. Test
On/OFF
HRmax-p
On/OFF
Online
On/OFF
HRmax-p can be turned on only if Polar Fitness Test is on.
3. Scroll up or down until
FUNCTION SET is displayed.
4. Press OK to start the function settings. OwnCal is displayed.
On lin e Re co rd in g t o Co m p u t e r o n /o ff
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Online is displayed.
To set the following functions on you have to set your user information.
If lbs/kg are displayed as you start setting the function on, the wrist
receiver points out that you have not set your all user information.
6. Press OK to start setting the online recording. On/OFF starts to flash.
7. Scroll up or down to set the online recording on or off. Press OK.
Ow n Ca l Ca lo rie Co u n t e r o n /o ff
To use this function you need an optional Polar IR Interface.
If you start from the Time of Day display, repeat steps 1-4.
5. Press OK to start setting the OwnCal function. On/OFF starts to flash.
6. Scroll up or down to set the OwnCal on or off. Press OK.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
To get the most accurate OwnCal results, update the VO2max setting and the
HRmax setting with clinically measured values (if available). If you do not
know your clinically measured values perform Polar Fitness Test and update
the OwnIndex and HRmax -p settings in Fitness Test mode.
Fit n e ss Te st o n /o ff
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Fit. Test is displayed.
6. Press OK to start setting the fitness test. On/OFF starts to flash.
7. Scroll up or down to set the fitness test on or off. Press OK.
B 32
B 33
S810i manual USA GBR A.pm6
32-33
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Scroll to the unit which best suits you. Press OK.
There are two different user information settings.
Monitor Settings
1. In the Time of Day display scroll up or down
until OPTIONS is displayed.
Op t io n s
Un it s 1: kg, cm, day-month-year
Un it s 2: lbs, feet, month-day-year
Monitor Set
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
Tu rn in g He lp o n /o ff
Sound
On/OFF
Units
1/2
Help
On/OFF
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Help is displayed.
3. Scroll up or down until MONITOR SET is
displayed.
6. Press OK to start setting the Help function. On/OFF starts to flash.
7. Scroll up or down to set the Help on or off. Press OK.
4. Press OK to start the monitor settings.
Sound is displayed.
If you turn Help on, the flashing arrows guide you to use the correct
buttons in the Options and File modes. If you want to change the middle
row information during exercise, the function name will appear for a few
seconds.
Tu rn in g t h e Act ivit y/Bu t t o n So u n d o n /o ff
If you start from the Time of Day display, repeat steps 1-4.
5. Press OK to start setting the sound. On/OFF starts to flash.
6. Scroll up or down to set sound on or off. Press OK.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Your receiver has two distinct sounds: activity/button sound and alarms.
This setting includes only the activity/button sound settings.
•
Certain Measure and Exercise mode settings will be audible: start, stop,
heart touch function, phase start, phase end and recovery calculation end.
Heart rate zone alarms, watch alarm or fitness test alarm will make a
distinctly different sound.
•
Se le ct in g Me a su rin g Un it s
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Units is displayed.
6. Press OK to start setting the units. 1 or 2 starts to flash.
B 34
B 35
S810i manual USA GBR A.pm6
34-35
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Time is flashing. Scroll up or down to select time 1 or time 2. Press OK.
8. 12 h/ 24 h starts to flash.
Watch Settings
Scroll up or down to select 12 h or 24 h time mode. Press OK.
24 h: skip step 9.
1. In the Time of Day display scroll
up or down until OPTIONS is
displayed.
Op t io n s
Watch Set
Alarm
9. AM/ PM starts to flash. Scroll up or down to select AM or PM. Press OK.
10. The hours start to flash. Scroll up or down to adjust the hours. Press OK.
11. The minutes start to flash. Scroll up or down to adjust the minutes.
Press OK.
2. Press OK to enter the Options
mode. EXERCISE SET is
displayed.
Time
1/2
Date
Remind
On/OFF
3. Scroll up or down until WATCH SET is displayed.
Se t t in g Da t e
4. Press OK to start the watch settings. ALARM is displayed.
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until DATE is displayed.
6. Press OK to start adjusting the date.
7. Month / Day appears. Scroll up or down to
Se t t in g Ala rm
If you start from the Time of Day display, repeat steps 1-4.
5. Press OK to start alarm settings.
On/OFF starts to flash.
select the desired value. Press OK.
12 h Time mode:
OFF: skip
steps 7 - 9.
8. Day / Month appears. Scroll up or down to
month - day - year.
6. Scroll up or down to set alarm on or off. Press OK.
24 h: skip step 7.
select the desired value. Press OK.
24 h time mode:
9. Year digits start to flash. Scroll up or down to
day - month - year.
7. 12 h: AM/ PM starts to flash. Scroll up or down to select AM or PM. Press OK.
8. The hours start to flash. Scroll up or down to adjust the hours. Press OK.
9. The minutes start to flash. Scroll up or down to adjust the minutes. Press OK.
select the year. Press OK.
Tu rn in g Re m in d e rs o n /o ff
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until REMIND is displayed.
6. Press OK to start setting the reminders.
When the alarm comes on, it will sound for one minute. You can turn it off
by pressing any of the five buttons.
7. Scroll up or down until desired reminder is displayed. The number of the
reminder is displayed in the corner of the display.
8. Press OK. On/OFF starts to flash.
Se t t in g Tim e o f Da y
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until TIME1/ TIME 2 is displayed.
6. Press OK to start setting the time of day.
9. Scroll up or down to set the reminder on or off. Press OK.
B 36
B 37
S810i manual USA GBR A.pm6
36-37
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
You can upload 7 reminders, each including time and name, to your wrist
receiver from Polar Precision Performance software.
The reminder sounds an alarm only when time of day is displayed. When
the reminder alarm comes on, it will sound for 15 seconds. You can turn it
off by pressing any of the buttons except the signal/light button.
Erase the reminder text by pressing any of the buttons except the
signal/light button.
C. EXERCISE
To continue your settings, press the stop button or to return to the Time of
Day display, press and hold the stop button.
You can use tw o modes w hile
exercising: Measure or Exercise mode.
In the Measure mode you can see
your heart rate but exercise
Tim e o f Da y
Setting Tips
Heart rate measure mode
Exercise recording mode
Sw a p Tim e 1 o r Tim e 2
In the Time of Day display press and hold the down button. Time 1 or
Time 2 is displayed in the uppermost row for a couple of seconds. Displayed
time will now be used in all watch and alarm functions. If you chose time 2,
“2” is displayed in the Time of Day display.
information w ill not be recorded. In
the Exercise mode your exercise is
recorded. Stopw atch and other
calculations are also started.
Sh o rt cu t t o Wa t ch Se t t in g Lo o p
Press and hold the signal/light button for a few seconds to enter into the
watch setting loop. If you want to skip some parts and go directly to a watch
function, scroll up or down button until the desired watch function is
displayed. Set the function as in the “Watch settings” section.
Heart Rate Measure Mode
Sw a p Me a su rin g Un it s
1. Wear the transmitter and the wrist receiver as described in “Easy start” section.
2. To ensure that the code search will find a signal:
As you set your user information for weight and height, press and hold the
signal/light button until the units are swapped. Release the button.
•
•
Keep the wrist receiver within 3 feet/ 1 meter of your transmitter.
Check that you are not near: people with heart rate monitors, high
voltage power lines, televisions, mobile phones, cars, motor driven
exercise equipment or other electromagnetic disturbance.
Sw a p Da t e , Use r ID Nu m b e r, Use r Na m e a n d Lo g o
You are able to set a user ID number, user name and logo with the Polar
Precision Performance software. These settings are shown on the upper row
of the Time of Day display. You can swap between the user ID, user name,
logo and date by pressing and holding the up button.
B 38
C 39
S810i manual USA GBR A.pm6
38-39
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Start from the Time of Day display by pressing the OK to start measuring
your heart rate. A heart symbol will start flashing and your heart rate in
beats per minute will appear in max. 15 seconds. The frame around the
heart symbol indicates that the heart rate reception is coded. The
receiver returns automatically to the Time of Day display within
5 minutes if there is no heart rate reception.
Exercise Recording Mode
If you are continuing from the Measure mode, press OK.
Or, if you are starting from the Time of Day display, press and hold OK.
If BasicUse exercise starts, even if you have set an exercise profile on please
check that you have set at least one of the exercise profile functions on.
Exercise information will be stored in an exercise file only when the
stopwatch is running. The ongoing recording is indicated with a graphic
bar that runs continuously on the display.
The following displays start to alternate as you enter the Measure mode:
If t h e re is 00 / - - re a d in g on the display, there is no heart rate reception.
Bring the wrist receiver up to your chest near the transmitter’s Polar logo.
The receiver will look for another heart rate signal.
Time of Day
Exercise name
Memory left
Current
heart rate
At the start of your workout, exercise time is displayed in minutes and
seconds. When you have exercised more than 60 minutes, exercise time
is displayed in hours and minutes.
Profiles (E1-E7),
BasicSet(E8) or
BasicUse (E0)
Recording rate
Tu rn in g t h e h e a rt ra t e zo n e a la rm o n /o ff
Press and hold the signal/light button. When
appears on the display the
Online* measurement to
the computer is on
zone alarm is on. A beeping noise will sound with each heart beat to alert
you that your heart rate is outside the set limits. If you do not want to use
the zone alarm the flashing heart rate reading indicates if your heart rate is
outside the limits. This function can be used if you have turned on heart rate
limits in Profile and BasicSet exercises.
In addition to the alarm you can see:
*To use this function you need an optional Polar IR Interface.
if you are exercising above heart rate zone.
if you are exercising below heart rate zone.
C 40
C 41
S810i manual USA GBR A.pm6
40-41
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Yo u h a ve t h re e o p t io n a l Exe rcise m o d e s d e p e n d in g o n t h e se le ct e d
Receiver automatically stores a lap time when you stop recording an
exercise. You can store 99 laps if you have not used the profile
function. After storing 99 laps FULL appears for a few seconds every
time you take a lap. You can continue taking laps but they will not be
recorded. The wrist receiver continues recording all other information
of the exercise, except lap and Profile information.
e xe rcise :
• BasicUse (E0)
• BasicSet (E8)
• Profiles (E1-E7)
The following functions can be used during all three optional Exercise modes.
Pa u sin g t h e Exe rcise
Illu m in a t in g t h e Disp la y
Press the stop button.
Press the signal/light button.
The exercise recording, stopwatch and other calculations are paused. To
continue them, press OK. Or, to return to the Time of Day display, press and
hold the stop button.
After you use backlight once in the Measure mode, the receiver
automatically illuminates the display when you start /stop the exercise
session, store lap information end an interval and recovery calculation.
The receiver automatically returns to the Time of Day display within
5 minutes if you forget to quit the heart rate measuring after having
stopped the stopwatch and taken the transmitter off your chest.
St o rin g La p a n d Sp lit Tim e
Press OK to store lap and split time.
Sw a p p in g t h e Disp la ye d Exe rcise In fo rm a t io n
First
Then
There are three display options, which you can swap between by pressing
the down button. The receiver saves the upper and lower row settings for
the three display options. If the Help function is on, the name of the
selected function appears for a few seconds.
Lap time
Split time
Average heart
rate of the lap
Number of
the lap
Time of Day
Stopwatch
Current
Time of Day
Lap time
Stopwatch
Time of Day
heart rate
Number of the lap
C 42
C 43
S810i manual USA GBR A.pm6
42-43
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Number of current interval.
Number of preset intervals.
Countdown timer.
When you have set a profile
exercise on, you will have one
extra display. You can change
the lower row for this display.
See the alternative phase
displays from " Starting an
exercise profile" / " Exercise
phases" section.
The bar indicates the baseline of your relaxation rate.
Bar of dots indicates the current relaxation rate in relation to
your baseline value. If you are in a more relaxed state than
the baseline value, the bar of dots is on the right side of the
baseline bar, and vice versa.
Phase number.
You cannot select the same displayed function to the upper and middle row
i.e. the option on the middle row is no longer available for the upper row.
You can configure the middle and upper rows during heart rate
measurement.
Se le ct t h e Lo w e r He a rt Ra t e In fo rm a t io n ro w
3. Press and hold the down button to select from the following: Current heart
rate, average heart rate (AVG) or the reading in percentages of your
maximum heart rate (% MAX) if you have set your user information.
Se le ct t h e Mid d le Ro w In fo rm a t io n
1. Press the down button to select the desired display alternative. When
you swap the middle row information, the upper and lower rows
change also. Continue selecting the upper and lower rows.
You can only change the displayed function of the lower row if the
stopwatch is on.
Se le ct t h e Up p e r Ro w In fo rm a t io n
Re se t t in g t h e St o p w a t ch t o Ze ro
2. Press the up button to select from the following: Time of Day (Time),
stopwatch (Sw), lap time (Lp), relaxation rate (Rlx) or calorie
expenditure (Cal), if OwnCal is set on.
As a result of resetting your stopwatch the recorded file is deleted.
1. Pause your exercise by pressing the stop button.
2. Press and hold the down button until the stopwatch is reset. " Reset"
stops flashing as the stopwatch is reset. Release. If you are resetting a
profile exercise repeat step 2.
Additionally you will have a graphical relaxation rate display in the upper
row. Relaxation rate helps you recognize stressful situations. The degree of
relaxation rate is highly individual, therefore compare the value to your
own baseline. See also section " User Information Settings" and " Rlx,
Relaxation rate" in " Display Texts" section.
3. Press OK to restart the stopwatch and recording or to return to the Time
of Day display, press and hold the stop button.
C 44
C 45
S810i manual USA GBR A.pm6
44-45
29.7.2002, 14:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Exe rcise Ph a se (P1-P6)
Starting an Exercise Profile (E1-E7)
Each exercise profile may include up to six pre-programmable exercise phases.
Each phase may include up to 30 interval and recovery periods, which
alternate continuously through the phase.
1. Start from the Time of Day display. Press OK to enter the Measure mode.
2. If you want to swap the profile (E1-E7), press and hold the up button
until the exercise is swapped. Release. Repeat until desired profile is
displayed.
In t e rva l Pe rio d
1. First
3. To start exercising and recording the exercise press OK.
Preset heart rate limits (if set on).
2. Then
Profile function automatically guides you through the exercise. In order
to hear the activity sounds when the phase starts and stops make sure
the activity/button sound is on. When the stopwatch starts running
indicates that profile function is on. As exercise ends the receiver
automatically starts a BasicUse exercise, which is recorded in the same
file as the exercise profile.
One of the following is displayed depending on your settings:
A. manual, B. time-based or C. heart-rate-based interval.
A. Manual interval
Number of set intervals. (C means you have set continuous intervals)
Current interval number.
Stopwatch.
Phase number.
Example of a exercise profile structure:
If you selected manual interval, your interval will end as you press
and hold OK.
Heart
rate
Phase 1 Phase 2
Phase 3
Repeats 3
Phase 4 Phase 5 Phase 6
Repeat 1 Repeat 1 Repeat 1
Or
Repeat 1 Repeats 2
B. Time-based interval
160
140
120
100
80
Countdown timer.
If you selected time-based interval, your interval will end as you
reach the preset time.
Or
C. Heart-rate-based interval
The difference between the preset interval heart rate and current
heart rate.
60
If you selected heart-rate-based interval, your interval will end as
you reach the preset heart rate reading.
40
0
10
20
30
40
50
Time
C 46
C 47
S810i manual USA GBR A.pm6
46-47
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
After the last phase has ended the receiver automatically
continues exercise recording with BasicUse mode.
3. At the end of interval
Interval duration.
Average heart rate of the interval.
In t e rru p t in g a n Exe rcise Pro file
When your intervals end, the wrist receiver automatically
continues following the preset function, recovery
calculation or the following exercise phase.
1. Press the stop button to pause the exercise.
2. Press and hold the stop button to return to the Time of Day display.
Or
Press the stop button. BasicUse appears. You can continue measuring your
heart rate in this mode (Measure mode). To continue exercising with
BasicUse and recording your exercise information press OK. Repeat steps 1
and 2 to return to the Time of Day display.
Re co ve ry Pe rio d
One of the following is displayed depending on your settings:
A. time-based recovery or B. heart-rate-based recovery.
A. Time-based recovery
Recovery countdown timer.
Current heart rate.
Exercising w ith BasicSet (E8)
Or
In BasicSet, you can continue using the functions in the “Exercise recording
mode” section.
B. Heart-rate-based recovery
The difference between the preset recovery heart
rate and current heart rate.
Current heart rate.
St a rt in g t h e Tim e rs
If timers are set on, they automatically start running once you start the
stopwatch. Timers alternate in the following order: timer 1, 2, 3, 1, 2, 3, etc.
At the end of timer 1 you will hear 1 beep, at the end of timer 2 you will hear
2 beeps and at the end of timer 3 you will hear 3 beeps. Timers stop running
when you stop the stopwatch.
You will hear two beeps when the recovery calculation is done.
At the end of recovery
Recovery duration.
Drop in your heart rate.
Sw a p p in g t h e He a rt Ra t e Lim it s
Press and hold the up button. Repeat until the desired limits are displayed.
C 48
C 49
S810i manual USA GBR A.pm6
48-49
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset the calculation by pressing and holding the down button. Reset Int?
(=interval) or Reset Re? (=recovery) is displayed until the calculation is
reset. To restart the same calculation press the OK button or to reset the
exercise, press and hold the down button.
St a rt in g Re co ve ry Ca lcu la t io n
To start the recovery calculation, press and hold the OK button.
Depending on your, setting RecoHr or RecoTime appears in the upper row
of the display. See " Starting an exercise profile" / " Recovery calculation"
section for the displayed information during the recovery calculation. After
the recovery calculation is done the exercise is paused. You can continue
the exercise by pressing the OK button after the recovery calculation. If you
do another recovery calculation, the previous recovery information will be
deleted.
In t e rru p t in g a n In t e rva l o r Re co ve ry Ca lcu la t io n o f a n Exe rcise
Pro file
Press and hold the OK button during your profile exercise to interrupt the
calculation. The following section automatically starts. Ex. if you interrupt
an interval your recovery calculation (if set on) automatically starts.
Stopping the Exercise
In t e rru p t in g a Ph a se o f a n Exe rcise Pro file
1. Press the stop button to pause the exercise.
2. Press and hold the stop button until time of day is displayed.
Your lap and split time are automatically recorded, when you end the
exercise.
Press the stop button to pause the exercise. Press and hold the OK button.
The following phase automatically starts. If you have done all the preset
phases the BasicUse exercise starts.
He a rt To u ch Fu n ct io n
Tips during the Exercise
The heart touch function is activated as you bring the wrist receiver near
the transmitter’s Polar logo.
Sw a p p in g t h e Exe rcise Typ e (E0-E8)
In the Measure mode press and hold the up button. Release. Repeat until
desired exercise is displayed.
You have three display alternatives for the heart touch function. To select
you heart touch display, use your Polar Precision Performance software:
Sw a p p in g t h e Re co rd in g Ra t e o f t h e Exe rcise (rr, 5 s, 15 s or 60 s)
In the Measure mode press and hold the down button. Release. Repeat
until desired recording rate is displayed.
•
•
•
Checking the current heart rate limits
Swapping the display options
Storing lap time
Re se t t in g t h e In t e rva l o r Re co ve ry Ca lcu la t io n o f a n Exe rcise Pro file
Press the stop button to pause the exercise.
During the heart touch, the backlight is on for a couple of seconds, if you
have already used the backlight during the exercise.
C 50
C 51
S810i manual USA GBR A.pm6
50-51
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Your first file is F1, then F2 and so on, until you have recorded maximum 99
exercise files. The bigger the file number the more recent it is.
D. HOW TO RECALL TRAINING
INFORMATION
Some information alternates on the display automatically. You can make
the information alternate faster by pressing the OK button, Ex., the
target heart rate zone information.
Exe rcise File
1. In the Time of Day display scroll up or down until FILE is displayed.
2. Press OK to enter the File mode. The main information of your file is
displayed.
The Polar heart rate monitor starts saving exercise
information to a file as you start the stopw atch.
You can recall the information in the File mode. In
the File mode there are up to 99 exercise files and a
record file, w hich keeps track of the cumulative
values.
Starting date and time alternate on the display.
Exercise name.
File number.
BasicUse E0,
Profil E1-E7 or
BasicSet E8.
Time of Day
File
F99
Options
F1
Fit. Test
Connect
3. Scroll up or down until the desired file is displayed.
4. Press OK to start recalling an exercise file. Exe. Time is displayed.
Records
•
•
•
•
Move forward and backward within file loops with up or down buttons.
Press OK to enter a file or to enter a deeper level in the file loop.
Press the stop button to move backward to the previous file level.
To return the Time of Day display, press and hold the stop button.
D 52
D 53
S810i manual USA GBR A.pm6
52-53
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Re co ve ry In fo rm a t io n o f Ba sicSe t Exe rcise (Reco)
Time-based recovery
(F1-F99)
Exe rcise File
Exe. Time
Reco
Recovery duration.
Drop in your heart rate.
Or
Limits
Heart-rate-based recovery
Time it took reach the preset heart rate reading.
Drop in your heart rate.
InZone1
InZone2
He a rt Ra t e Lim it s (Limits)
Reco 30
Int. 30
Settings of the heart rate limits alternate on the display. Limits
1 are used for heart rate zone 1, limits 2 for zone 2, etc.
InZone6
KCal
Phase 6
Exe rcise Tim e w it h in , a b o ve a n d b e lo w t h e He a rt Ra t e
Zo n e s
Lap 99
Reco 1
Int. 1
Tot. KCal
Tot. Time
EXE. SET
LAPS
Indicates the exercise time, which you have spent within
(InZone), above and below each heart rate limits during the
entire exercise.
Phase 2
Phase 1
Lap1
Ca lo rie Exp e n d it u re (KCal)
Best Lap
You will see how many kilocalories you have expended during
the exercise.
SAMPLES
Exe rcise Tim e (Exe. Time)
Cu m u la t ive Ca lo rie Co u n t (Tot. KCal)
The exercise time is the amount of time that you have
exercised with the stopwatch running. Average, maximum and
minimum heart rates of your exercise alternate on the display.
To continue recalling the file, scroll up or down.
Calculates the cumulative calories expended during several
exercise sessions starting from the previous value stored in the
records file. This function allows you to follow the calorie count
as a gauge of effective exercise Ex. during one week.
D 54
D 55
S810i manual USA GBR A.pm6
54-55
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Cu m u la t ive Exe rcise Tim e Co u n t (Tot. Time)
3. Press the stop button to return to the previous file level and skip steps 4
and 5, or continue recalling more detailed information of the phase by
pressing OK.
This function counts cumulative exercise time expended during several
exercise sessions starting from the previous value stored in the records file.
It allows you to follow the exercise time count as a gauge of amount of
exercise Ex. during one week.
4. Scroll up or down between intervals (Int) and recoveries (Reco).
In t e rva l In fo rm a t io n
Your cumulative total time is displayed in hours and minutes until
99 hours 59 minutes is reached. After this your cumulative exercise
time is displayed in hours until 9999 hours is reached.
Interval number
Split time of the interval
Interval duration.
The heart rate at the
end of the interval,
average and
Pro file Exe rcise In fo rm a t io n (EXE. SET)
EXE. SET
maximum
Phase 1
Int. 1
Phase 6
heart rates of the
selected interval.
Reco 1
Int. 30
Reco 30
Re co ve ry In fo rm a t io n
Time-based recovery
Start with the display showing EXE. SET.
Profile exercise time.
Recovery duration.
Drop in your heart rate.
Or
Profile number.
Heart-rate-based recovery
1. Press OK to start recalling the profile exercise information.
2. Scroll up or down to see the information on exercise phases.
Time it took reach the preset heart rate reading.
Drop in your heart rate.
Phase number.
Phase duration.
Average heart rate of intervals and recoveries.
D 56
D 57
S810i manual USA GBR A.pm6
56-57
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
5. To continue recalling information on the other phases, press the stop
button. To continue recalling, Ex., lap information press the stop
button twice. Scroll up or down until LAPS is displayed.
Re co rd e d He a rt Ra t e Sa m p le s
FILE
You can recall detailed heart rate information of an
exercise from the sample file. Start with the display
showing SAMPLES.
F1-F99
SAMPLES
La p In fo rm a t io n (LAPS)
1. Press OK to start recalling the recorded samples of your
exercise information. The following information is
displayed: The RR reading in milliseconds (ms), the
FILE
Start with the display showing LAPS
S 1
S2
F1-F99
and the number of recorded laps.
1. Press OK to start recalling the lap
sample number (S1 - If the RR recording rate is turned off), the time
when the heart rate sample occurred and heart rate.
2. Scroll up or down the samples.
LAPS
information.
2. Scroll up or down to see the
Best Lap
Lap 1
Lap 99
following information:
Press and hold the stop button to return to the Time of Day display.
Re co rd s File
Be st La p
This file is updated each time your exercise is recorded to file.
1. In the Time of Day display scroll up or down until FILE is displayed.
2. Press OK to enter the File mode.
Shortest lap time.
The number of the best lap.
The best lap information is displayed if you have stored at least
3 laps. The best lap can not be the last lap.
3. Scroll up or down until Records is displayed.
4. Press OK to enter the records file. Tot. KCal is displayed.
You will have a count for cumulative calories expended during several
exercise sessions starting from the previous resetting.
5. Scroll up or down to see the cumulative exercise time (Tot. Time)
starting from the previous time resetting.
La p s
Split time.
Lap time.
Lap number.
You can now return to the Time of Day display by pressing and holding
the stop button or continue updating your cumulative counts.
The heart rate at the end of the lap,
average and
maximum heart rates of the lap.
Up d a t in g Yo u r Cu m u la t ive Co u n t s t o Ze ro
Once your have updated the cumulative count you cannot retrieve it.
Start with the display showing Tot. KCal or Tot. Time in the records file.
Press the stop button to exit the LAPS display.
D 58
D 59
S810i manual USA GBR A.pm6
58-59
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press OK to start updating the desired total count. Reset appears and
the value starts to flash.
E. CONNECTION TO
COMPUTER
2. Press and hold the down button. Reset starts to flash. You can still
cancel the previous setting by releasing the down button before the
value is updated. If you are sure that you want to update the value keep
holding the down button until value is updated. Release.
3. Press the stop button to exit the reset display. Press and hold the stop
button to return to the Time of Day display.
There is tw o-w ay communication betw een Polar and a
computer. The Polar Precision Performance softw are offers
an easy w ay to analyze training data. A training log makes
it possible to plan future training. Wrist receiver settings
can be uploaded from the softw are or manually entered.
After preparing your settings you can upload options lock
to ensure that your settings w ill not change. You must
deactivate the options lock from the “user features” of
De le t in g a File
1. In the Time of Day display scroll up or down until FILE is displayed.
2. Press OK to enter the File mode.
3. Scroll up or down until desired exercise file is displayed. Press and hold
the signal/light button. DELETE FILE and file number are displayed.
4. Press OK. The receiver confirms if you want to delete a file (Are you
sure).
your softw are.
5. Press OK to delete the selected file.
6. Press stop to exit the file. Wait appears. The receiver reorganizes your
file, which takes few seconds.
Dow nloading Training Data to Computer
7. Press stop to return to the Time of Day display.
For IR communication you need an IrDA port and Windows® 98
operating system or later in your computer.
De le t in g All File s
1. In the Time of Day display scroll up or down until FILE is displayed.
2. Press and hold the signal/light button. DELETE FILES is displayed.
3. Press OK. The receiver confirms if you want to delete all files
(Are you sure).
If you do not have an IrDA port in your computer you need one of the
following:
A) an optional Polar IR Interface for RS-232 port and Windows® 95
operating system or later in your computer o r
4. Press OK to delete all exercise files.
5. Press stop to return to the Time of Day display.
D 60
D 61
S810i manual USA GBR A.pm6
60-61
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
B) an optional Polar IR Interface for USB port and Windows® 98 operating
system or later in your computer.
•
•
a user ID, user name or logo for easier receiver recognition in
multi-user situations
the heart touch function to show the current heart rate limits, store a
lap time or swap the display options during your exercise
names and alarm times for 7 reminders
Install the Polar Precision software (version 3 or later) first, then connect
the optional Interface to the corresponding port of the computer before
starting the software.
•
•
options lock function on or off
1. Start the Polar Precision Performance software.
2. Scroll up or down until CONNECT is displayed in the receiver display.
Point the infrared window of the receiver towards the infrared window
of the computer or an optional Interface. The maximum infrared
transfer distance is 8" / 20 cm and the infrared transfer angle 15 degrees.
3. On the toolbar of the software, click on the heart rate monitor
You may upload settings from a computer to a wrist receiver either via IR
communication or via audible Polar UpLink. For IR communication please
see the previous chapter “Downloading Training Data to Computer”.
For the polar UpLink communication proceed as follows:
1. Start the software.
Connection icon
and hold the receiver steady. A new window
2. If the receiver is in the Time of Day display scroll up or down until
CONNECT is displayed.
" Infrared Connection" appears.
4. The receiver automatically starts to communicate with the software as
Infrared appears. Follow the instructions on the computer screen to
proceed with downloading exercise files or uploading heart rate
monitor settings.
3. Place the receiver less than 4" / 10 cm from the loudspeaker.
4. Activate the upload function of the software. Do not move the receiver
during the data transfer.
5. The receiver automatically starts to upload the information as UpLink
appears. You will hear a chirping sound while information is transferred
to the receiver. The receiver automatically returns to the Time of Day
display after data transfer.
Uploading Settings from Computer
Your Polar heart rate monitor offers you the option of preparing your
settings with Polar Precision Performance software. You are also able to set
following functions with the software:
If t h e d a t a t ra n sfe r w a s u n su cce ssfu l bring the receiver closer to the
loudspeakers or turn the volume level of the loudspeakers up.
E 62
E 63
S810i manual USA GBR A.pm6
62-63
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
To be able to upload the settings from Polar Precision Performance
software via Polar UpLink, you need a personal computer with a sound
card (compatible with SoundBlaster™) and dynamic loudspeakers or
headphones.
F. POLAR FITNESS TEST
On lin e Re co rd in g
You can perform Online Recording with the Polar S810i heart rate monitor,
Polar Precision Performance software (version 3 or later) and optional Polar
IR Interface.
1. To st a rt re co rd in g : See how to turn the Online measurement on in B:
“Online Recording to Computer on/off” section. Select at the software
Options - Preferences - Hardware tab. Select in the Advanced pane on
the Online Recording field Polar S810i+IR Interface. Press OK.
Place the wrist receiver within the reception range. Point the infrared
window of the receiver towards the window of the Interface. Wear the
transmitter. Start from the receiver’s Time of Day display and press OK
to activate the Heart rate monitor. If you like to store the recording
press the OK button once more to start the stopwatch and recording.
Select Tools - Online Recording at the software and press the Start
button on the Online Recording panel.
The Polar Fitness Test is an easy, safe and quick
w ay to estimate individual maximal aerobic
pow er and to get predicted maximum heart rate
value. The Polar Fitness Test is targeted to healthy
adults.
Ow nIndex
OwnIndex is a value which is comparable to maximal oxygen uptake
(VO2max), a commonly used descriptor of aerobic fitness. Cardiovascular
(aerobic) fitness relates to how well your cardiovascular system works to
transport and utilize oxygen in your body. The stronger and more efficient
your heart is, the better the cardiovascular fitness is. VO2max is a good
indicator of performance capability in endurance sports.
2. To st o p re co rd in g : In the software, press the Stop button and then
press the Close button. Select the person to whom the file will be saved.
The exercise will be added to the selected person's Diary data. Press the
Stop button of the receiver.
E 64
F 65
S810i manual USA GBR A.pm6
64-65
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to improve your cardiovascular fitness, it takes a minimum of
6 weeks on an average to see a noticeable change in OwnIndex. Less fit
individuals see progress even more rapidly and for more fit individuals
more time is needed. The better the cardiovascular fitness of an individual,
the smaller the improvements in OwnIndex.
Predicted Maximum Heart Rate (HRmax-p)
The HRmax-p definition is carried out simultaneously with the Polar Fitness Test.
The HRmax-p score predicts your individual maximum heart rate value more
accurately than the age-based formula (220-age). The age-based method
provides a rough estimation and may not be very accurate, especially for
people who have been fit for many years or for older people. The most
accurate way of determining your individual maximum heart rate is to have
it clinically measured (in maximal treadmill or bicycle stress test) by a
cardiologist or an exercise physiologist.
Cardiovascular fitness is best improved by exercise types which employ
large muscle groups. Such activities include cycling, running, swimming,
rowing, skating, cross-country skiing and walking.
To monitor your fitness progress start with measuring your OwnIndex a
couple times during the first two weeks, to get a baseline value. Thereafter,
repeat the test approximately once a month. OwnIndex is based on resting
heart rate, heart rate variability at rest, age, gender, height, body weight
and self-assessed physical activity.
Your maximum heart rate changes to some extent in relation to your
fitness. Regular endurance exercise tends to decrease HRmax. There may
also be some variation according to the sport you participate in. For
example, running HRmax > cycling HRmax > swimming HRmax
.
HRmax-p gives the possibility of defining training intensities as percentages
of maximum heart rate and of following maximum heart rate changes due
to training, without an exhaustive maximal stress test. HRmax-p is based on
resting heart rate, heart rate variability at rest, age, gender, height, body
weight and maximal oxygen uptake, VO2max (measured or predicted). The
most accurate HRmax-p is obtained by entering your clinically measured
VO2max into the wrist receiver.
F 66
F 67
S810i manual USA GBR A.pm6
66-67
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitness Test Settings
Time of Day
File
Options
Fit. Test
Connect
To be able to carry out the Polar Fitness Test you need to input the
following settings in the Options mode:
1. In the Time of Day display scroll up or down until FIT. TEST is displayed.
If you cannot find Fitness Test mode check that you have turned the
function on in the Options mode.
•
•
•
Set your personal user information and long-term physical activity level.
Set the Polar Fitness Test on.
2. Press OK to enter the Fitness Test mode. Your latest OwnIndex and the
testing date are displayed.
Set the HRmax-p on if you want to get a prediction of your maximum
heart rate.
3. Scroll up or down to see your latest HRmax-p and the testing date.
4. Lie d o w n a n d re la x yourself for 1-3 minutes before the test.
Carrying Out the Test
St a rt t h e Te st
To get reliable test results, the following basic requirements apply:
It takes 3-5 minutes to carry out the test.
5. Press OK to start the test. The wrist receiver starts searching for your
heart rate. TEST On and your heart rate are displayed. The test begins.
6. Lie relaxed. Keep your hands beside your body and avoid body
movements. Don’t communicate with other people.
7. Your current OwnIndex and the testing date are displayed.
8. If HRmax-p is on: Scroll up or down to see the HRmax-p result and the
testing date.
•
•
You should be relaxed and calm.
The test can take place anywhere – home, office, health club – as long
as the testing environment is peaceful. No disturbing noises (Ex.
television, radio or telephone), no other people talking to you.
Keep the testing place, time of day and environment the same every
time the test is repeated.
•
•
•
Avoid eating a heavy meal or smoking 2-3 hours prior to testing.
Avoid heavy physical effort, alcoholic beverages or pharmacological
stimulants on the test day and the day before.
Tu rn t h e Fit n e ss Te st So u n d Sig n a l o n /o ff
The sound signal will alarm you at the end of the test. If the sound signal is
on
•
appears on the display.
To turn the sound signal on or off either before or during the test, press
and hold the signal/light button.
F 68
F 69
S810i manual USA GBR A.pm6
68-69
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
In t e rru p t t h e Te st
Fitness Classes
•
You can stop the test any time during the test by pressing the stop button.
Failed TEST is displayed for a few seconds.
The latest OwnIndex and HRmax-p are not replaced.
The Polar Fitness Test result, your OwnIndex, is most meaningful when
comparing your individual values and changes in them. OwnIndex can also
be interpreted according to your gender and age. Locate your OwnIndex
on the table to find your current cardiovascular fitness classification,
compared with those who are of the same age and gender.
If the wrist receiver does not succeed in receiving your heart rate at the
beginning or during the test, the test will fail. Check that the transmitter
electrodes are wet and the elastic strap is snug enough.
Ag e
1
2
3
4
5
6
7
(years) (very
poor)
(poor)
(fair)
(average) (good)
(very
good)
57-62
54-59
52-56
49-54
47-51
44-48
42-46
40-43
37-40
(excellent)
Update Ow nIndex and HRmax-p
20-24
25-29
30-34
35-39
40-44
45-49
50-54
55-59
60-65
< 32
< 31
< 29
< 28
< 26
< 25
< 24
< 22
< 21
32-37
31-35
29-34
28-32
26-31
25-29
24-27
22-26
21-24
38-43
36-42
35-40
33-38
32-35
30-34
28-32
27-30
25-28
44-50
43-48
41-45
39-43
36-41
35-39
33-36
31-34
29-32
51-56
49-53
46-51
44-48
42-46
40-43
37-41
35-39
33-36
>62
>59
>56
>54
>51
>48
>46
>43
>40
You can update your OwnIndex and HRmax-p values to the Options mode/
User information. When you update these values regularly, the reading in
percentages of your maximum heart rate and calorie calculation give more
accurate individual information.
1. In the Time of Day display scroll up or down until FIT. TEST is displayed.
2. Press OK to enter the Fitness Test mode.
20-24
25-29
30-34
35-39
40-44
45-49
50-54
55-59
60-65
< 27
< 26
< 25
< 24
< 22
< 21
< 19
< 18
< 16
27-31
26-30
25-29
24-27
22-25
21-23
19-22
18-20
16-18
32-36
31-35
30-33
28-31
26-29
24-27
23-25
21-23
19-21
37-41
36-40
34-37
32-35
30-33
28-31
26-29
24-27
22-24
42-46
41-44
38-42
36-40
34-37
32-35
30-32
28-30
25-27
47-51
45-49
43-46
41-44
38-41
36-38
33-36
31-33
28-30
>51
>49
>46
>44
>41
>38
>36
>33
>30
3. Scroll up or down until Update USER SET is displayed. This display
appears if you have not updated your latest test results.
4. Press OK to update the OwnIndex and HRmax-p values.
5. To return to the Time of Day display, press and hold the stop button.
Your maximum heart rate value is updated if the HRmax-p is on.
The classification is based on literature review of 62 studies where VO2max was measured directly in healthy
adult subjects in the USA, Canada and 7 European countries. Reference: Shvartz E, Reibold RC: Aerobic fitness
norms for males and females aged 6 to 75 years: a review. Aviat Space Environ Med; 61:3-11, 1990.
F 70
F 71
S810i manual USA GBR A.pm6
70-71
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
For various fitness classes we recommend the following:
G. CARE AND
5-7 Maintain
current exercise
MAINTENANCE
habits for good
health and
fitness.
4
To ensure good health,
maintain current exercise
habits. For fitness
Your Polar heart rate monitor is a high-tech instrument of
superior design and w orkmanship and should be treated w ith
care. The suggestions below w ill help you fulfill the guarantee
obligations and enjoy this product for many years to come.
improvement an increase in
exercise is recommended.
1-3 Increase exercise
for health
benefits and
fitness
improvement.
7
6
Ta kin g Ca re o f Yo u r Po la r He a rt Ra t e Mo n it o r
5
•
•
•
Wash the transmitter regularly after use with a mild soap and water
solution. Dry it carefully after washing with soft towel.
Never store the transmitter wet. Sweat and moisture can keep its electrodes
wet and the transmitter activated, which shortens the battery life.
Store your Polar heart rate monitor in a cool and dry place. Do not store
it in any kind of non-breathing material, such as a plastic bag or a sports
bag if it is wet.
4
3
2
1
Top athletes typically score OwnIndex values above 70 (men) and 60
(women). Values as high as 95 can be reached by athletes of Olympic
caliber. OwnIndex is highest in sports that involve large muscle groups such
as cross-country skiing and cycling.
•
•
Do not bend or stretch the transmitter. This may damage the electrodes.
Do not dry the transmitter in any other way than with a towel.
Mishandling may damage the electrodes.
•
•
Keep your Polar heart rate monitor out of extreme cold and heat. The
operating temperature is 14 ºF to 122 ºF / -10 ºC to 50 ºC
Do not expose the Polar heart rate monitor to direct sunlight for
extended periods, such as by leaving it in a car.
G 73
F 72
S810i manual USA GBR A.pm6
72-73
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba t t e rie s
Tra n sm it t e r
H. PRECAUTIONS
The estimated average battery life of the transmitter is 2500 hours of
use. Contact your authorized Polar Service Center for a replacement
transmitter. Polar recycles used transmitters. See your Customer Care
Charter for detailed instructions.
Usin g t h e Po la r He a rt Ra t e Mo n it o r in a Wa t e r En viro n m e n t
Wrist Re ce ive r
Your Polar heart rate monitor is water resistant to 160 feet/ 50 meters.
The estimated average battery life of the wrist receiver is 2 years in
normal use (2h/ day, 7 days a week). Please note that excessive use of the
backlight and the alarm signals will drain the battery more rapidly. Do
not open the Polar wrist receiver yourself. To ensure the water resistance
properties and the use of qualified components, the wrist receiver
battery should be replaced by an authorized Polar Service Center only.
At the same time a full periodic check of the Polar heart rate monitor
will be done.
Users measuring heart rate in a water environment may experience
interference for the following reasons:
•
•
•
Pool water with a high chlorine content and seawater are very
conductive. The electrodes of a Polar transmitter may become short
circuited which prevents EKG signals from detection by the transmitter
unit.
Jumping into the water or strenuous muscle movement during
competitive swimming may cause water resistance that shifts the
transmitter on the body to a location where it is not possible to pick up
EKG signal.
Se rvice
Should your Polar heart rate monitor need service, see the Customer Care
Charter to contact an authorized Polar Service Center.
The EKG signal strength varies depending on the individual’s tissue
composition and the percentage of people who have problems in heart
rate measuring is considerably higher in a water environment than in
other use.
Water resistance cannot be guaranteed after unauthorized service.
G 74
H 75
S810i manual USA GBR A.pm6
74-75
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Polar Heart Rate Monitor and Interference
4. If the Polar heart rate monitor still does not work with the exercise
equipment, this piece of equipment may be electrically too noisy for
wireless heart rate measurement.
Ele ct ro m a g n e t ic In t e rfe re n ce
Disturbances may occur near high voltage power lines, traffic lights,
overhead lines of electric railways, electric bus lines/ trams, televisions, car
motors, bike computers, some motor driven exercise equipment, cellular
phones or when you walk through electric security gates.
Minimizing Possible Risks in Exercising w ith a Heart Rate Monitor
Exercise may include some risk, especially for those who have been
sedentary. Before starting a regular exercise program an individual is
recommended to answer to the following questions for health status
checking. If the answer is yes to any of the questions, we recommend to
consult a doctor before starting an exercise program.
Cro sst a lk
The Polar wrist receiver in non-coded mode (mode is indicated by heart
symbol without frames) of operation picks up transmitter signals within 3
feet/ 1 meter. Non-coded signals, from more than one transmitter picked up
simultaneously, can cause an incorrect readout.
•
•
•
•
•
•
•
•
•
•
Have you not exercised for the past 5 years?
Do you have high blood pressure?
Exe rcise Eq u ip m e n t
Several pieces of exercise equipment with electronic or electrical
components such as LED displays, motors and electrical brakes may cause
interfering stray signals. To try to tackle these problems, relocate the Polar
wrist receiver as follows:
Do you have high blood cholesterol?
Do you have symptoms of any disease?
Are you taking any blood pressure or heart medication?
Do you have a history of breathing problems?
Are you recovering from a serious illness or medical treatment?
Do you use a pacemaker or another implanted electronic device?
Do you smoke?
1. Remove the transmitter from your chest and use the exercise equipment
as you would normally.
2. Move the wrist receiver around until you find an area in which it
displays no stray reading or flashing of the heart symbol. Interference is
often worst right in front of the display panel of the equipment, while
the left or right side of the display is relatively free of disturbance.
3. Put the transmitter back on the chest and keep the wrist receiver in this
interference-free area as far as it is possible.
Are you pregnant?
Note that in addition to exercise intensity, medications for heart, blood
pressure, psyche, asthma, breathing etc. as well as some energy drinks,
alcohol and nicotine, can affect heart rate.
H 76
H 77
S810i manual USA GBR A.pm6
76-77
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
It is im p o rt a n t t o b e se n sit ive t o yo u r b o d y’s re a ct io n s d u rin g t h e
e xe rcise . If you feel unexpected pain or tiredness regarding your
exercise intensity level, it is recommended to stop the exercise or
continue at a lighter intensity.
I. FREQUENTLY ASKED
QUESTIONS
No t ice t o p e rso n s w it h p a ce m a ke rs, d e fib rilla t o r o r o t h e r
im p la n t e d e le ct ro n ic d e vice . Persons who have a pacemaker use the
Polar heart rate monitor at their own risk. Before starting use, we
always recommend an exercise test under doctor’s supervision. The test
is to ensure the safety and reliability of the simultaneous use of the
pacemaker and the heart rate monitor.
Wh a t sh o u ld I d o if...
...I d o n ’t kn o w w h e re I a m in t h e Op t io n s o r File cycle ?
Press and hold the stop button until time of day is displayed.
...I ca n n o t fin d t h e p re vio u s e xe rcise ’s file ?
You may have used the Measure mode during your exercise, which means
that your exercise was not stored. To record the exercise you have to turn
the stopwatch on by pressing the OK button in the Measure mode.
If yo u a re a lle rg ic t o a n y su b st a n ce t h a t co m e s in t o co n t a ct
w it h t h e skin o r if yo u su sp e ct a n a lle rg ic re a ct io n d u e t o u sin g
t h e p ro d u ct , check the listed materials in the " Technical
Specifications" chapter. To avoid any skin reaction risk with the
transmitter, wear it over a shirt. However, moisten the shirt well under
the electrodes to ensure flawless operation.
...I ca n n o t fin d t h e e xp e n d e d ca lo rie s fro m m y e xe rcise file ?
Check that you have set your personal user information and turned the
OwnCal function on. Check that your heart rate has reached over 90 bpm
or above 60 % of your maximum heart rate during your exercise.
...I ca n n o t t u rn m y HRm a x-p o n ?
The combined impact of moisture and intense abrasion may cause a
black color, which might stain light-colored clothes especially, to come
off the transmitter's surface.
Check that you have set your personal user information and turned the
fitness test on before turning the HRmax-p on.
H 78
I 79
S810i manual USA GBR A.pm6
78-79
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
...t h e re is n o h e a rt ra t e re a d in g (- -)?
...o t h e r p e rso n w it h h e a rt ra t e m o n it o r is ca u sin g in t e rfe re n ce ?
Keep a distance from your training partner and continue your training
session normally.
1. Check that the electrodes of the transmitter are moistened and that you
are wearing it as instructed.
2. Check that you have kept the transmitter clean.
3. Check that you are not near other people that have heart rate monitors,
high voltage power lines, televisions, mobile phones or other sources of
electromagnetic disturbance.
Or
1. Take the transmitter off your chest for 30 seconds. Keep a distance from
your training partner.
2. Put the transmitter back and bring the receiver up to your chest near
the transmitter’s Polar logo. The receiver starts looking for a heart rate
signal again. Continue your training session normally.
4. Have you had a cardiac event which may have altered your EKG
waveform? In this case consult your physician.
...t h e co d e se a rch w a s n o t su cce ssfu l?
...h e a rt ra t e re a d in g b e co m e s e rra t ic o r e xt re m e ly h ig h ?
You may have come within range of strong electromagnetic signals which
cause erratic readings. Check your surroundings and move further away
from the source of disturbance.
The frame around the heart symbol will disappear. Bring the receiver up to
your chest near the transmitter’s Polar logo. The receiver starts looking for
a heart rate signal again. If you still do not succeed in code searching, but
your heart rate is displayed and the heart symbol without a frame is
flashing, you can start exercising. However, your wrist receiver may
become disturbed by other heart rate monitors.
...t h e d isp la y is b la n k o r fa d in g ?
If the display is blank, activate the wrist receiver by pressing the OK button
twice, after which the Time of Day display appears. The first sign of a
discharged battery is the battery symbol on the display. Also the digits fade
when the backlight is used. Have the batteries checked.
...h e a rt sym b o l fla sh e s irre g u la rly?
1. Check that the wrist receiver is not further than 3 feet/ 1 meter from
the transmitter.
2. Check that the elastic strap has not become loose during exercise.
3. Make sure that the electrodes of the transmitter are moistened.
4. Make sure that there is no other heart rate transmitter within
3 feet/ 1 meter.
...t h e re a re n o re a ct io n s t o a n y b u t t o n s?
Reset the Polar heart rate monitor. Resetting clears watch settings which
will return to the default settings. User information and measuring units
settings will be saved.
5. Cardiac arrhythmia may cause irregular readings. In this case consult
your physician.
I 80
I 81
S810i manual USA GBR A.pm6
80-81
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press the RESET button with a pen tip. Display becomes full of digits.
If you don’t press any button after reset within one minute the wrist
receiver goes to the Time of Day display.
J. TECHNICAL
SPECIFICATIONS
2. Press any of the buttons once. The time of day is displayed.
...t h e b a t t e ry o f t h e w rist re ce ive r m u st b e re p la ce d ?
We recommend having all service done by an authorized Polar Service
Center. This is especially necessary to ensure the guarantee remains valid
and is not affected by incorrect repair procedures done by an unauthorized
agent. Polar Service will test your wrist receiver for water resistance after
battery replacement and make a full periodic check of the complete Polar
heart rate monitor.
Polar heart rate monitor is designed to indicate the level of
physiological strain and intensity in sports and exercise. No
other use is intended or implied. Heart rate is displayed as
number of heart beats per minute (bpm).
...t h e d a t a t ra n sfe r fro m re ce ive r t o co m p u t e r w a s u n su cce ssfu l
1. Check the correct position of the wristwatch receiver with the infrared
window of the computer or the optional Polar IR Interface.
2. Check that the surroundings are not too bright. This problem often
occurs near windows.
Tra n sm it t e r
Battery type:
Battery life:
Built-in Lithium Cell
Average 2500 hours of use
14 °F to 122 °F/ -10 °C to +50 °C
Polyurethane
3. Check that there is no obstruction between the infrared windows.
Operating temperature:
Material:
Waterproof
Ela st ic St ra p
Buckle material:
Fabric material:
Polyurethane
Nylon, polyester and natural rubber
including a small amount of latex
I 82
J 83
S810i manual USA GBR A.pm6
82-83
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Wrist Re ce ive r
Battery type:
Help
On
CR 2430
OwnCal
OFF
On
Battery life:
Average 2 years (2h/ day, 7 days/ week)
14 °F to 122 °F/ -10 °C to +50 °C
to 160 feet/ 50 meters
Polyurethane
Fitness test
HRmax-p
Operating temperature:
Water resistance:
Wrist strap material:
OFF
OFF
Online
Exercise settings
BasicUse
Back cover and wrist strap buckle material: Stainless steel complying with
EU Directive 94/27/EU and its amendment 1999/C 205/05 on the release of
nickel from products intended to come into direct and prolonged contact
with the skin.
On
BasicSet function
Profile function
Heart touch function
Recording rate
OFF
OFF
Shows heart rate limits
5 s
Watch accuracy better than ± 0,5 seconds/ day at 77 °F/ 25 °C temperature.
Polar S810i is a Class 1 Laser Product.
Lim it Va lu e s
Accuracy of heart rate measurement: ± 1% or ± 1 bpm, whichever larger,
definition applies to steady state conditions.
Exercise time
99 h 59 min 59 s
30 - 240
Heart rate limits
Heart rate zone time
Recovery time
99 h 59 min 59 s
99 min 59 s
99 999 kcal
999 999 kcal
9 999 h
De fa u lt Se t t in g s
In USA and Canada
Time of Day
In other countries
Time of Day
Alarm
Activity
Low
Calories
12 h
HRmax
220-age
Cumulative calories
Cumulative exercise time
Laps recorded to memory
Files recorded to memory
VO2max
24 h
OFF
0
male
45
35
0
99
female
99
Date of Birth
(adjustable range for
year is 1921 - 2020)
Sex
Baseline
Activity sound
In USA and Canada
Units
On
Male
2
1
Weight
0
0
In other countries
Units
Height
J 84
J 85
S810i manual USA GBR A.pm6
84-85
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
K. LIMITED POLAR INTERNATIONAL
GUARANTEE
L. DISCLAIMER
•
This limited Polar international guarantee is issued by Polar Electro Inc. for
the consumers who have purchased this product in the USA or Canada. This
limited Polar international guarantee is issued by Polar Electro Oy for the
consumers who have purchased this product in other countries.
Polar Electro Inc. / Polar Electro Oy guarantees to the original consumer/
purchaser of this product that the product will be free from defects in
material or workmanship for two years from the date of purchase.
Ple a se ke e p t h e re ce ip t o r In t e rn a t io n a l Gu a ra n t e e Ca rd , w h ich is
yo u r p ro o f o f p u rch a se !
The guarantee does not cover the battery, damage due to misuse, abuse,
accidents or non-compliance with the precautions; improper maintenance,
commercial use, cracked or broken cases.
Guarantee does not cover any damage/s, losses, costs or expenses, direct,
indirect or incidential, consequential or special, arising out of, or related to
the product. During the guarantee period the product will be either
repaired or replaced at an authorized service center free of charge.
This guarantee does not affect the consumer’s statutory rights under
applicable national or state laws in force, or the consumer’s rights against
•
•
The material in this manual is for informational purposes only.
The products it describes are subject to change without prior notice,
due to the manufacturer’s continuous development program.
•
Polar Electro Inc. / Polar Electro Oy makes no representations or
warranties with respect to this manual or with respect to the products
described herein. Polar Electro Inc. / Polar Electro Oy shall not be liable
for any damages, losses, costs or expenses, direct, indirect or incidental,
consequential or special, arising out of, or related to the use of this
material or the products described herein.
•
•
This product is protected by one or several of the following patents:
FI 88223, DE 4215549, FR 92.06120, GB 2257523, HK 113/1996,
SG 9591671-4, US 5491474, FI 88972, DE 9219139.8, FR 92.09150,
GB 2258587, HK 306/1996, SG 9592117-7, US 5486818, FI 96380, US 5611346,
EP 665947, DE69414362, FI 68734, DE 3439238, GB 2149514,HK 812/1989,
US 4625733, FI 100924, FI 100452, US 5840039, FI 4150, DE 20008882.3,
FR 0006504, FI 4069, US 6272365, FR 9907823, GB 2339833, DE 29910633,
FI 104463, US 6183422, FI 4157, DE 20008883.1, FR 0006778, WO 97/33512,
GB 2326240.
•
•
the dealer arising from their sales/ purchase contract.
This CE marking shows compliance of
this product with Directive 93/42/EEC.
Other patents pending.
Copyright © 2000, 2002 Polar Electro Oy, FIN-90440 KEMPELE, Finland. All rights reserved.
No part of this manual may be used or reproduced in any form or by any means without prior written
permission of Polar Electro Oy.
The names and logos marked with a ™ symbol in this user's manual or in the package of this product are
trademarks of Polar Electro Oy, except that Sound Blaster is a trademark of Creative Technology, Ltd. The
names and logos marked with a ® symbol in this user's manual or in the package of this product are
registered trademarks of Polar Electro Oy, except that Windows is a registered trademark of Microsoft
Corporation.
K 86
L 87
S810i manual USA GBR A.pm6
86-87
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
M. POLAR GLOSSARY
Act ivit y le ve l: A personal assessment of your long term physical activity
He a rt t o u ch fu n ct io n :When you are in Exercise mode, bring your wrist
receiver close to the Polar logo on your transmitter and the selected heart
touch function is activated for a few seconds.
level that is used in the Polar Fitness Test.
Co d e d h e a rt ra t e t ra n sm issio n : Polar coded transmitter automatically
locks in a code to transmit your heart rate to the wrist receiver. In a coded
transmission the receiver accepts heart rate data only from the Polar coded
transmitter. Coding significantly reduces crosstalk caused by other users of
heart rate monitors. However, it does not necessarily reduce all
environmental interference.
Ma xim a l o xyg e n u p t a ke : (maximal aerobic power, VO2max) Is the maximal
rate at which oxygen can be used by the body during maximal work.
VO2max is a good index of aerobic fitness.
Ma xim u m h e a rt ra t e : (HRmax) Is the highest number of heart
beats per minute of a person.
Ele ct ro d e s: The grooved areas of the transmitter that rest against the skin
and pick up the EKG signal.
Me a su re m o d e : Measuring your heart rate without recording the exercise.
Exe rcise m o d e : The stopwatch is on and your exercise is recorded. You can
Ta rg e t h e a rt ra t e zo n e : The area between the upper and lower target
select either the BasicUse, Profiles and BasicSet exercise modes.
heart rate limits. Target zone selection is based on personal fitness goals.
M 88
M 89
S810i manual USA GBR A.pm6
88-89
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Symbols
Display Texts
Indicates an ongoing heart rate measurement and flashes to the beat
of your heart. A heart without frames indicates a non-coded heart rate
transmission.
ALARM: Indicates the alarm in
watch settings.
AM o r PM: Are used in 12h time
mode. Ex. in 24h time mode 13:00
means 1:00 PM.
AVG: Together with a reading
indicates average heart rate.
Ba se lin e : Set your personal
relaxation rate baseline.
Ba sicSe t : Pre-programmable
exercise with three alternating
timers and heart rate limits.
Additionally you can set a time- or
heart-rate-based recovery function
that is turned on manually in the
exercise situation.
E0: Indicates BasicUse exercise.
E1-E7: Indicates the profile exercise.
E8: Indicates the BasicSet exercise.
EXE. SET: Indicates the recorded
exercise profile information in the
File mode.
Exe . Tim e : Indicates the time you
exercised with running stopwatch.
FILE: Indicates the file mode.
FIT. TEST: Indicates fitness test
mode.
FULL: After having stored 99 laps
(the use of Profiles reduces the
amount) FULL appears in the
display. You can continue taking lap
times or Profiles but they won’t be
recorded into the file.
HRm a x-p : Predicted maximum heart
rate value.
In t .: Indicates the work period of
a profile exercise.
In Zo n e / Ab o ve / Be lo w : Indicate
the time spent within, above and
below the target zone.
KCa l: Indicates the energy
expenditure of your exercise.
Frame around the heart indicates a coded transmission of heart rate.
Indicates there has not been heart rate reception for at least 5 seconds.
- - Indicates there is no heart rate reception. Bring the wrist receiver up to
your chest near the transmitter’s Polar logo. The receiver starts looking
for the heart rate signal again.
In the Time of Day display the alarm is on.
Measure mode: beeps if you are exercising outside your target heart rate
zone. Fitness Test mode: sounds an alarm at the end of the fitness test.
Indicates profile exercise.
Ba sicUse : Exercising without
settings.
Be st La p : Indicates the shortest lap
time information.
Indicates continuous intervals and recoveries. See Cont in
" display texts" chapter.
Exercise mode: indicates the heart rate above the target zone.
Exercise mode: indicates the heart rate below the target zone.
CONNECT: Communication mode
between wrist receiver and
computer.
Co n t : Up to 30 intervals and
recoveries succeed one another
unless the phase is manually
stopped.
The graphic bar consists of five blocks. A flashing block indicates in
which level you are in the Options settings or File recalling loops.
Continuously running bars indicate that the exercise is recorded.
Indicates low battery.
M 90
M 91
S810i manual USA GBR A.pm6
90-91
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
LAPS: Indicates how many lap times
have been stored.
La p Tim e , Lp : Indicates the time
the lap took.
Lim Hig h : The higher heart rate
limit of the target zone.
Lim Lo w : The lower heart rate limit
of the target zone.
Lim it s: Heart rate limits for target
zones.
MAX: Indicates the highest
heart rate.
MAX % : Indicates what percentage
your current heart rate is of your
maximum heart rate.
Me m fu ll: Appears on the display
when the memory is full. You can
continue your exercise and taking
lap times but they won’t be
recorded into the file.
most accurate OwnCal is received by
entering your clinically measured (in
maximal treadmill or bicycle stress
test) VO2max and HRmax into the wrist
receiver. Energy expenditure
measurement is most accurate in
continuous activities such as cycling
and running.
Ow n INDEX: Result of Polar Fitness
Test and comparable score with
maximal oxygen uptake (VO2max in
ml/kg/min).
P1-P6, e xe rcise p h a se s: Indicates
pre-programmable exercise phases of
the profile exercise. Each phase
includes adjustable number of interval
periods and a recovery period.
Pro fil: Indicates a preprogrammable
exercise profile with six optional
phases.
Re co Tim e , t im e -b a se d re co ve ry:
You set the recovery time in the
Options mode. In the File mode you
will see the drop in your heart rate
and the recovery duration.
wrist receiver within the reception
range, 8" / 20 cm, of the interface
and within range of the transmitter,
3 feet/ 1 meter.
OPTIONS: Indicates the Options
mode.
Rlx, Re la xa t io n ra t e : Relaxation
rate is most useful when measuring
your heart rate at rest or during light
daily activities, such as office work.
After exercise, Ex., in the following
morning, the value can also indicate
the state of your physical recovery. A
resting heart rate significantly higher
or a relaxation rate smaller than
normal may be an indication of an
incomplete recovery. Mental stress
typically increases heart rate and
decreases relaxation rate. Relaxation
rate measurement is based on the
heart rate variability, which indicates
your autonomic nervous system's
state. The degree of heart rate
Ow n Ca l: Calculates energy
expenditure during exercise in
kilocalories. 1 kilocalorie (kcal) =
1000 calories (cal). You can follow
how much energy you lose by
exercising in one exercise session or
in a day, week or even a year. The
OwnCal can be used as a dose
measure of exercise Ex. in nutrition
planning. OwnCal calorie calculation
starts when your heart rate reaches
90 bpm or is above 60 % of your
maximum heart rate, whichever is
smaller. These limits are set to count
only exercise calories. The higher the
heart rate, the faster the energy
expenditure. OwnCal is individually
calibrated by your preset weight,
maximal oxygen uptake (VO2max) and
maximum heart rate (HRmax). The
Re co Hr, h e a rt -ra t e -b a se d
MIN: Indicates minimum heart rate
of exercise in the File mode.
m s: Millisecond
re co ve ry: You set the heart rate,
which will end your recovery
calculation. In the File mode you
will see the drop in your heart rate
and the recovery duration.
variability is highly individual and
tends to decrease over time.
RR: R-R recording rate measures
heart beat intervals, i.e. the time
On lin e *: Online recording allows
you to transfer your heart rate to
computer in real time. Place the
*An optional IR Interface is required.
M 92
M 93
S810i manual USA GBR A.pm6
92-93
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
heart beat intervals when the
backlight is on. Also the use of
activity/button sound may
occasionally cause a loss of one
R-R interval. Readings that are
interpreted as incorrect in the heart
rate data can be adjusted and
corrected with Polar Precision
Performance software.
between successive heart beats in
milliseconds. This information is
also shown as instantaneous heart
rate in beats per minute in recorded
samples. Recording every interval
accurately is more difficult than
obtaining the averaged heart rate
only, because R-R recording rate is
shielded less from measurement
disturbances. We recommend using
contact gel (ECG gel) to ensure
contact between your skin and the
transmitter. It is useful to minimize
the use of the heart touch function
and backlight, because the heart
rate receiver does not detect new
Index
12h/ 24h time mode ............................... 36
Activity/button sound On/OFF .............. 34
Alarm settings ........................................ 36
Baseline for relaxation rate .................. 19
BasicSet exercise .............................. 21, 49
BasicUse exercise ............................. 20, 22
Buttons ...................................................... 6
Care and maintenance .......................... 73
Code search ............................... 39, 80, 88
Connection to computer ....................... 62
Date settings .......................................... 37
Deleting a file ......................................... 61
Display configuration ............................ 43
Download training data
to a computer .................................... 62
Easy start ................................................... 8
Exercise settings ..................................... 20
File ........................................................ 52
Fitness test .............................................. 65
Fitness test On/OFF ................................ 32
Frequently asked questions .................. 79
Functions during the exercise ............... 41
Guarantee ............................................... 86
Heart rate limits .............................. 51, 55
Heart rate limits settings
HR max -p On/OFF ..................................... 33
Illuminating the display ........................ 42
Interrupt an exercise phase .................. 51
Interrupt an interval or
recovery calculation .......................... 51
Lap and split time storing ........ 42, 51, 59
Measuring units settings ................ 34, 38
Modes and their functions .................... 11
Name profiles ......................................... 30
Online* measurement to
computer ............................... 40, 64, 92
Online* On/OFF ...................................... 33
Options lock function ............................ 62
OwnCal calorie expenditure .......... 44, 92
OwnCal On/OFF ...................................... 32
OwnIndex ........................................ 65, 93
Pause an exercise ................................... 43
Precautions ............................................. 75
Predicted maximum heart rate ...... 67, 91
Profile exercise .......................... 46, 57, 93
Recall training information .................. 52
Recording rate settings ......................... 31
Records file ............................................. 60
Recovery during BasicSet ............... 50, 55
Recovery during exercise profile ... 48, 58
Recovery settings for BasicSet .............. 24
Recovery settings for
Sp lit Tim e : The time exercised so
far when you take a lap time during
exercise.
Sw : Indicates stopwatch.
To t . Tim e : Indicates cumulative
exercise times of several exercise
sessions.
for BasicSet ......................................... 23
Heart rate limits settings for Profile .... 28
Heart rate zone alarm On/OFF ............. 41
Heart touch function ............................. 51
Help On/OFF ........................................... 35
How to enter settings ............................ 14
exercise profile ................................... 29
Relaxation rate. ......................... 19, 44, 93
Reminder On/OFF ................................... 37
Reset the cumulative counts ................. 60
* An optional Polar IR Interface is required.
M 95
M 95
M 94
S810i manual USA GBR A.pm6
94-95
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset the heart rate monitor ................ 81
Reset the stopwatch .............................. 45
Return to the Time of Day display ......... 7
Selecting exercise type ................... 20, 50
Setting interval calculation ................... 26
Setting tips ............................................. 38
Start a profile exercise ........................... 46
Start measuring your heart rate ...... 9, 39
Stop a profile exercise ........................... 49
Stop measuring your heart rate .... 10, 50
Swap the exercise type .......................... 50
Swap the heart rate limits .................... 49
Swap the time zones 1/ 2 ...................... 38
Technical specifications ......................... 83
Time of day settings .............................. 36
Timer settings for BasicSet .................... 23
Transmitter ........................................ 5, 10
Update HR max -p and OwnIndex
to user information ........................... 70
Upload settings from computer ........... 63
User information settings ..................... 16
M 96
S810i manual USA GBR A.pm6
96
29.7.2002, 14:15
Download from Www.Somanuals.com. All Manuals Search And Download.
|