Blaupunkt Car Stereo System RTM 127 User Manual

Radiophone

Helsinki RTM 127

Operating instructions

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents (Radio, CD changer - optional)

Important information.................. 73 Quick reference

Traffic program station

for radio and CD changer (optional)

operation ............................................. 79

reception with RDS-EON ............. 88

Safety standards................................... 73

General information .............................. 73

Effects of RF (radio frequency)

Switch traffic announcement

priority on/off ......................................... 88

Adjust the volume for traffic announce-

ments and the beep tone...................... 88

Beep tone ............................................. 88

Switch off the warning beep .............. 89

Automatic search start.......................... 89

Select operating mode................. 84

energy................................................ 73

Safety information................................. 73

Traffic safety ...................................... 73

Using the telephone while driving ..... 73

Using the telephone in critical areas. 74

Emergency calls ................................ 74

Installation............................................. 74

Notes on connecting a CD changer,

amplifier, voice control system or

Audio mode........................................... 84

Radio operation with RDS ........... 85

AF - Alternative Frequency................... 85

REG - regional program ....................... 85

Select a waveband ............................... 85

Station tuning ........................................ 85

CD changer operation

(optional)....................................... 89

....................................... 85

Switch CD changer operation on ......... 89

Select the CD and the track ................. 89

Enter CD names ................................... 90

Clear ..................................................... 90

Clear CD name ..................................... 90

MIX........................................................ 90

PaX (PAC) memory .............................. 91

Manual tuning with << / >>................ 86

Enter the frequency directly.................. 86

Scroll through the broadcasting

networks (FM only) ............................... 86

Store radio stations............................... 86

Automatically store the stations with

the strongest reception using

infrared remote control unit: .............. 75

Accessories .......................................... 75

KeyCard and SIM card ................. 76

Basic information .................................. 76

Second KeyCard/SIM card ............... 76

Invalid KeyCards ............................... 76

Starting up the Radiophone.................. 76

Using the Radiophone after the

Programming with DSC ............... 91

Travelstore ............................................ 87

Recall stored radio stations .................. 87 Programming with DSC – Setup ....... 92

power has been disconnected .......... 76

Select the language for the display... 77

Remove the KeyCard/SIM card............ 77

Train KeyCard/SIM cards ..................... 77

DSC learn mode ................................... 78

Displaying the radio pass data ............. 78

Optical warning of anti-theft

Alter search sensitivity.......................... 87

Switch from stereo to mono (FM only) . 87

Radiotext............................................... 88

Learn card ......................................... 92

Card list ............................................. 92

Learn mode ....................................... 92

Language .......................................... 92

KeyCard LED .................................... 93

BEEP ................................................. 93

Key tones .......................................... 93

Vario Colour ...................................... 93

Brightness ......................................... 93

protection .............................................. 78

Care of your KeyCard/SIM card ........... 79

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents (Radio, CD changer - optional)

Angle ................................................. 93

Ignition timer ...................................... 93

Change code ..................................... 93

User mode ......................................... 93

Reset ................................................. 93

Overview of the DSC default settings

(Setup) .................................................. 94

DSC MENU – Radio ............................ 94

Radiotext ........................................... 94

Loudness ........................................... 94

TA volume ......................................... 94

VOLUME FIX..................................... 95

Sensitivity .......................................... 95

AUXILIARY SOURCE ....................... 95

Read KeyCard ................................... 95

Music/Speech .................................... 95

Overview of the DSC default settings

(Radio) .................................................. 95

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents (Telephone)

Answer/end a call ............................... 106 Add entry ............................................ 113

Call waiting (2nd caller) ...................... 106 Access ................................................ 113

Broker’s call/hold ................................ 107 Capacity .............................................. 113

Broker’s call ........................................ 107 Show my phone number..................... 114

Telephone operation.................... 98

General information .............................. 98

Emergency calls ................................ 98

PIN code

(Personal Identification Number).......... 98

Insert the SIM card/enter your

PIN code ............................................... 98

Reactivating the SIM card .................... 98

Make your first telephone call .............. 99

GSM emergency calls .......................... 99

Conference calls ................................. 107

Setup menu ....................................... 114

Setting up a conference call ............... 107

Volume ................................................ 114

International calls................................ 108

Ringing tone .................................... 114

What to do before leaving for a

Hands-free (volume) ....................... 114

foreign country................................. 108

Handset (volume) ............................ 114

How to place telephone calls in

Automatic answer ............................... 115

foreign countries.............................. 108

Automatic redial .................................. 115

Quick telephone reference ........ 100

How to receive calls ........................ 108

Ringing tone........................................ 115

How to place calls to a stationary

Ringing tone .................................... 115

Using the telephone................... 104

telephone in the host country.......... 108

SMS tone ......................................... 115

PaX (PAC) memory ............................ 108

Make telephone calls using the

handset (accessory) ........................... 109

GSM network service area ................. 104

Switch to telephone mode .................. 104

Save telephone numbers and names 104

Dial a telephone number .................... 105

Manual dialling ................................ 105

... from the list of parties called last 105

Using the speed-dial . . . ................. 105

. . . directly from the phone memory

My number .......................................... 115

AOC parameters (Advice of Charge) . 116

Audible call timer ................................ 116

PIN-code ............................................. 117

External alarm..................................... 117

Programming with DSC ............. 109

Phone book menu............................. 110

TA (Traffic Announcement)

How to enter a name/text ................... 110

during a telephone call ....................... 118

Enter letters/characters ................... 111

Overview of the factory default

Capital and small letters.................. 111

settings in the Setup menu ................. 118

bank: ......................................... 105

. . . directly from the SIM card

Move the cursor in the input text box111

Insert characters ............................. 111

Delete characters ............................ 111

Call menu........................................... 119

Call mailbox ........................................ 119

memory bank: ........................... 105

. . . from the telephone book ........... 106

Using the telephone ........................ 106

. . . by remote control ...................... 106

Redial function .................................... 106

Automatic ........................................ 106

Manual ............................................. 106

SMS messages................................... 119

Find an entry by name........................ 111

Read new messages....................... 120

Find an entry by position .................... 112

Sending SMS messages ................. 120

Select an entry by remote control: ..... 112

Read/clear stored messages .......... 120

Change, delete, move or copy an

Broadcast ........................................ 120

entry .................................................... 112

Parameters ...................................... 121

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents (Telephone)

Network selection ............................... 121

Available networks .......................... 121

Search method ................................ 121

Preferred networks .......................... 122

Call meters.......................................... 122

Call forwarding

(with a practical example)................... 123

In which situation should a call be

forwarded? ...................................... 123

Forward calls, PC data, faxes ......... 123

Enter data for call forwarding .......... 123

A practical example of call

forwarding........................................ 124

Call barring ......................................... 125

Change “password” ......................... 125

Bar “outgoing” calls: ........................ 125

Bar “incoming” calls:........................ 125

Bar calls, PC data, faxes................. 125

Enter data for call barring................ 126

Phone lock .......................................... 126

User group .......................................... 126

Specifications............................. 127

Amplifier .............................................. 127

Tuner................................................... 127

Telephone ........................................... 127

Glossary...................................... 128

Download from Www.Somanuals.com. All Manuals Search And Download.

Important information

Effects of RF (radio frequency) energy

Safety information

Safety standards

Your Radiophone is both a transmitter and

a receiver. It generates minimum amounts

of energy in the RF range. While it is in use,

the GSM system keeps a constant check

on both the frequency and the power.

Warnings that using mobile telephones may

be hazardous to your health have recently

been a topic of public discussion. For years

now, research efforts have concentrated on

what effects RF energy may have on your

health. Scientists have also begun research-

ing the latest radio technologies such as

GSM.

According to research results and by com-

plying with the corresponding safety stand-

ards, it is safe to say that GSM equipment

can be used without reservations with re-

spect to its biological effects.

If the Radiophone has been installed prop-

erly in your vehicle, using it is even safer

than using a portable cellular phone.

Traffic safety

The mobile telephone has been manufac-

tured in accordance with all of the applica-

ble radio frequency (RF) safety standards

and recommendations determined by the

government offices and organisations re-

sponsible (e.g. the VDE standard DIN-

0848).

Traffic safety always has the highest priori-

ty. As the driver of a motor vehicle, it is your

responsibility to pay attention to the traffic

situation at all times.

Never use your car radio in a way that could

distract you.

Please keep in mind that you travel a dis-

tance of 14 m per second at a speed of only

50 km/h.

Should the traffic situation become particu-

larly demanding, we advise you not to use

this equipment.

Always make sure that you are still able to

hear any warning signals coming from out-

side of your vehicle, such as police or fire

engine sirens, so that you can react accord-

ingly.

Consequently, you should always select a

moderate volume for playing your car audio

equipment while you are driving.

General information

The telephone function of your Radiophone

is based on the GSM radio telephone stand-

ard. This standard was developed for use

in Europe and many other countries and has

now spread throughout the world.

Using the mobile Radiophone, you can

make the same telephone calls as you can

with a cellular phone.

Important: You must be located in an area

serviced by the GSM radio network and have

the access privileges provided by a valid SIM

card. This SIM card must be inserted into

the unit (refer to the section on ”KeyCard

and SIM card” if necessary).

If you should still be concerned about the

effects of RF energy, there is a lot you can

do personally to ensure that you are ex-

posed to a minimum of these radio waves.

Using the telephone while

driving

Of course, it will help to reduce your call time Please observe all laws and regulations re-

to a minimum but it is especially important

to heed the following tips on using this equip-

ment.

garding the use of mobile telephones in mo-

tor vehicles.

•

Concentrate fully on your driving.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important information

•

Stop at a safe place before using the

telephone.

To switch off the telephone:

Press for approx. 2 seconds.

Under certain circumstances, some net-

works require that a valid SIM card is in-

serted into the unit.

In the event that certain functions (incom-

ing call lock, call number lock, user group,

AOC (advice of charge), system lock, key-

pad lock, etc.) are activated, it may be nec-

essary to deactivate them before placing an

emergency call.

•

If otherwise unavoidable:

Use only hands-free operation if you

have to use the telephone while you

are driving.

”TELEPHONE OFF” will appear in the dis-

play.

Reactivate the telephone:

Traffic safety always has the highest priori-

ty.

•

Press

briefly.

Emergency calls

Please read this instruction manual for fur-

ther information and consult your local net-

work operator.

Using the telephone in critical

areas

As with every other mobile telephone,

the Radiophone operates using a combina-

tion of mobile radio and cross-country net-

works, radio signals and functions pro-

grammed by the user. As a result, there is

no guarantee that your call will always go

through. Never depend exclusively on a

mobile telephone or similar equipment un-

der life-threatening circumstances (e.g. in

medical emergencies).

The telephone interface of the Radiophone

is only able to make and receive calls when

it is activated, located in an area served by

the radio network and when the signal is

strong enough.

Emergency calls may not be possible on all

mobile telephone networks or only if certain

network services and/or certain performance

features are active. Contact the local net-

work operators for more detailed informa-

tion.

Always switch off the mobile telephone in

areas where it is forbidden to use a mobile

phone or if this equipment could cause elec-

tromagnetic interference or otherwise dan-

gerous situations.

When placing an emergency call, be sure

to supply all the necessary information as

accurately as possible. Remember that your

mobile telephone may be the only means of

communication at the scene of an accident.

Do not hang up until you are told to do so.

Also read the information in the section on

”Telephone operation – GSM emergency

calls”.

Using the telephone can result in interfer-

ence with the correct functioning of medical

equipment which is not sufficiently shield-

ed, particularly near the antenna. Please

consult a doctor or the manufacturer of the

medical device if you have any questions.

Other electronic equipment can also be af-

fected by electromagnetic interference.

Installation

Have the Radiophone installed in your ve-

hicle and serviced by a trained service tech-

nician only. Faulty installation or servicing

can be dangerous and will result in the ex-

piry of your guarantee.

If the vehicle is not adequately shielded

against RF signals, electronic fuel injection

systems, electronic ABS systems, electron-

If you are in an area where there is

danger of explosion, e.g. filling sta-

tions, chemical factories or places

where blasting work is being done,

switch your telephone off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important information

ic cruise control systems or other electronic ration in voice quality or abrupt disconnec- Handset (telephone receiver)

equipment may experience malfunctions.

tions. In this case, please recheck the wir- Using the Blaupunkt handset 7 607 570 512

This equipment must not be operated with- ing or contact an authorised service centre. it is possible to place telephone calls with or

out a suitable GSM or combination antenna

mounted on the outside of the vehicle. The

equipment including the GSM or combina-

tion antenna must be installed by an author-

ised Bosch service centre only.

To ensure trouble-free operation, the posi-

tive power supply line must be connected

via the ignition and the permanent +12 V

lead.

without the hands-free function.

The system will switch automatically from

hands-free to handset operation when the

handset is removed from the cradle.

Accessories

Use Blaupunkt-approved accessories and

spare parts only.

You can use the following Blaupunkt prod-

ucts with this equipment:

There is a relatively strong magnet

in the handset.

Keep everything which could react

adversely to magnetic fields well

away from the handset. This includes

diskettes, check cards, etc. Important

data may be lost.

Changer:

CDC A 06 or A 072 (directly)

Do not ground the speaker outputs!

Remote control:

Avoid touching the display!

Using the infrared remote control RCT 07

7 607 570 510 you can conveniently control

all of the most important functions of your

Radiophone from the steering wheel.

The operating functions are described in the

Quick References.

In extreme cases this could result

in an accumulation of static elec-

tricity and destroy the display.

Amplifier

All Blaupunkt amplifiers.

Voice control system

(Available in German only)

Notes on connecting a CD changer,

amplifier, voice control system or infra-

red remote control unit:

Using the VOCS 08 7 607 570 509, you can

control the most important system functions

by speaking certain commands aloud in Ger-

man.

Because the motorist is subjected to a min-

imum amount of distraction when operating

the equipment, using a voice control sys-

tem makes an important contribution to road

safety.

In rare cases, you may experience problems

with your mobile telephone after connect-

ing accessory equipment, such as CD

changers, amplifiers, a voice control system

or an infrared remote control unit, if the in-

stallation conditions are unfavourable. This

can result in interference noise, a deterio-

Download from Www.Somanuals.com. All Manuals Search And Download.

KeyCard and SIM card

”CHECK KEYCARD” will appear for approx.

2 seconds in the display.

Remove the wrong card and replace it with

a valid KeyCard or SIM card.

Second KeyCard/SIM card

If you use a second KeyCard or SIM card,

this card will copy the settings programmed

on the original card.

KeyCard

It is also possible to store the following func-

tions individually:

Starting up the Radiophone

Basic information

Station preset buttons, bass, treble, balance

and fader settings, Loudness, TA (traffic an-

nouncement volume), VOLUME FIX.

For two KeyCards and the first two SIM

cards, the settings programmed last such

as waveband, bass/treble, fader/balance,

radio station, station preset buttons, VOL-

UME FIX will remain stored.

When you insert your KeyCard or one of the

first two SIM cards, you will find that the

equipment switches onto the basic settings

you have already programmed.

•

Switch the unit on (press 1).

One KeyCard is included with the Radio-

phone.

The car radio can also be operated with a

second ”trained” KeyCard or with one of up

to 30 “trainable” SIM cards.

Using the KeyCard it is possible to activate

the following operating modes:

Radio, CD changer (optional), AUX, tele-

phone emergency call.

Using the SIM card it is possible to activate

all operating modes. You can use either reg-

ular SIM cards or miniature SIM cards with

an adapter card.

The SIM card is equipped with the same

anti-theft functions as the KeyCard.

If necessary (in the event of loss or dam-

age), it is possible to purchase a KeyCard

or SIM card from an authorised dealer.

With the Card tongue protruding

out of the unit, insert the KeyCard

included with the Radiophone into

the slot with the contact surface

facing up. The Radiophone is now

ready for operation.

Do not try to insert the KeyCard

when the tongue is retracted as this

may damage the KeyCard mecha-

nism.

Invalid KeyCards

Using the Radiophone after the power

has been disconnected

If you insert a KeyCard which does not be-

long to this equipment into the unit, ”KEY-

CARD ERROR” will appear in the display.

Do not attempt to operate the equipment.

The unit will switch off after about 8 sec-

onds.

If an invalid card is inserted four times, there

will be a waiting period of one hour.

If you should insert a different type of card

(e.g. a telephone card or credit card),

If the Radiophone is disconnected from the

battery for any reason (e.g. during car re-

pair work) and re-connected again, it will be

necessary to use a trained KeyCard or the

Master SIM card to restart and reactivate

the other trained SIM cards.

Download from Www.Somanuals.com. All Manuals Search And Download.

KeyCard and SIM card

After this process has ended, the Radio- of the other SIM cards can be trained only

phone will switch off when the card has been with the Master SIM card and the KeyCard.

Select the language for the display

At the factory the texts for the display are

set to English.

You can display the texts in other languag-

es if you wish.

removed.

There are two basic ways to train other SIM

cards:

Train KeyCard/SIM cards

a) Train or delete KeyCard/SIM card

using DSC

•

Press DSC/OK. Two menu items will

appear in the display: Setup and Ra-

dio.

In the initial programming process you can

easily train the second KeyCard and up to

30 SIM cards.

DSC – LEARN CARD

•

Confirm Setup by pressing DSC/OK.

One KeyCard or up to 30 SIM cards

can be trained or replaced as addition-

al cards.

In order to do this the Radiophone must be

switched on and the original KeyCard insert-

ed.

Press

until ”LANGUAGE” appears

in the display.

•

Remove the original KeyCard and in-

sert the first SIM card within 15 sec-

onds.

• Insert the first KeyCard (included

with the Radiophone) into the unit

and switch the unit on.

•

Press DSC/OK and

language.

to select the

Press DSC/OK once and CL twice one

after the other.

“NAME?” will appear in the display.

• Press DSC/OK. Two menu items will

appear in the display: Setup and Ra-

dio.

If you wish, you can now enter a name of up

to 8 characters. If necessary, refer to “How

to enter a name/text”.

Remove the KeyCard/SIM card

• Confirm Setup by pressing OK.

Never forcibly pull out the card!

You may destroy it.

If you want to skip this function, or after you

have entered the name,

• Press

play marks ”LEARN CARD”.

until the arrow in the dis-

•

Press OK.

•

First push the card in gently towards

the unit.

• Press DSC/OK briefly.

The first SIM card has been programmed.

”TERMINATE? PRESS OK” will appear in

the display. Now you can program addition-

al cards.

”CHANGE CARD” will appear in the

display.

The KeyCard/SIM card will eject slightly so

that you can remove it.

• Remove the first KeyCard and insert

the new card (KeyCard or SIM card).

•

Remove the card.

To finish the programming process:

When you remove the card for the first time,

”LEARN CARD” will appear in the display.

Now you can train additional cards (refer to

”Train SIM cards”).

After insertion of a SIM card only: the

display shows “NAME?”.

If you wish, you can now enter a name

of up to 8 characters.

•

Press OK.

The SIM card programmed first takes on a

special function as the Master SIM card. All

Download from Www.Somanuals.com. All Manuals Search And Download.

KeyCard and SIM card

If necessary, refer to “How to enter a

name/text “.

c) Delete SIM card authorisations

Optical warning of anti-theft

protection

The authorisation for SIM cards can be

deleted using the CARD LIST in the

DSC menu. The Master SIM card can

be deleted with a KeyCard only.

• Press DSC/OK.

Flashing KeyCard tongue

• Enter the PIN code and press DSC/

OK.

When the vehicle has been parked and the

KeyCard or SIM card removed, the KeyCard

tongue can be switched to flash to provide

additional anti-theft protection.

For this function to operate properly it is nec-

essary for the positive power supply line and

the permanent +12 V lead to be connected

as described in the installation instructions.

Be sure that “KEYCARD LED ON” has been

activated in the DSC mode.

After “CODE OK”, the display shows

e.g. “SIM-CARD 23 ACCEPTED” (i.e.

this is the 23rd SIM card you have

trained).

DSC learn mode

With this function you can select whether

you want to train additional SIM cards using

the DSC menu only or each time after re-

moving the KeyCard or the Master SIM card

as well.

The Radiophone can now be operated

using the new cards.

If you attempt to program a third Key-

Card, the KeyCard which was not part

of the programming process will auto-

matically become invalid.

For operating instructions refer to ”Program-

ming with DSC – LEARN MODE”.

If necessary, refer to the section on “Pro-

gramming with DSC – KEYCARD LED”.

Displaying the radio pass data

If 30 SIM cards have been pro-

grammed, it will be necessary to delete

old access authorisations before new

cards can be trained.

Switch off the flashing light

Using the KeyCard supplied with your set

you can have the radio pass data such as

the model name, product number (7 6..) and

serial number indicated in the display.

Please refer to the section on “ Program-

ming with DSC – READ KEYCARD”.

The flashing light can be switched off by

pushing in the KeyCard tongue gently until

it locks.

If you would like to deactivate the flashing

tongue altogether, select the “KEYCARD

LED OFF” item in the DSC menu:

b) Train new cards after removing the

KeyCard or Master SIM card

If this function has been activated in

the DSC learn mode, it will be possible

to train additional SIM cards each time

the KeyCard or Master SIM card is re-

moved. This function is practical if you

want to train several cards one after

the other (fleet management).

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick reference for radio and CD changer (optional) operation

1 On/off

When the ignition has been switched

off, the unit will emit a double beep to

remind you to remove the KeyCard/

SIM card before leaving your vehicle.

If you switch off the ignition during a

telephone call, the Radiophone will re-

main switched on until you have com-

pleted the call.

Care of your KeyCard/SIM card

Volume

In order to ensure that the card always func-

tions correctly, the contacts must be free of

any foreign particles. Avoid touching the

contacts with your fingers.

Do not leave the cards in direct sunlight.

If necessary, clean the card contacts using

a cotton swab dipped in rubbing alcohol.

To switch the Radiophone on, press

the knob (volume control).

A valid KeyCard or SIM card must in

the unit already or inserted within the

next 15 seconds.

Never bend a KeyCard or a SIM card.

You may destroy it.

Operation in combination with an

ignition timer

If the ignition timer has been activated

in the DSC mode, the Radiophone will

switch off as programmed after the ig-

nition is switched off (refer to the sec-

tion on ”Programming with DSC – IG-

NITION TIMER”.

Switch the unit on/off with the Key-

Card:

If the equipment has been switched on

by pressing 1, then it can be

switched off and on again with the

KeyCard or SIM card.

This will not function properly unless

“MENU” has been activated in the

“LEARN MODE” in the DSC menu.

Switch the radio on when the igni-

tion is switched off

When the ignition is switched off (card

is inserted) the equipment will continue

to function as follows:

After you hear the double beep, press

the knob. The equipment will switch

back on. After one hour’s playing time,

the Radiophone will switch off auto-

matically to prevent the car battery

from going dead.

Note:

Be sure to read the information in the

section on ”KeyCard/SIM card anti-

theft protection system”.

Switch the unit on/off via the ignition:

If the equipment has been connected

properly, it can be switched on and off

with the vehicle ignition.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick reference for radio and CD changer (optional) operation

Alter the volume

Press AUD twice:

3 SRC (Source)

Turn the knob to alter the volume. The

setting selected will appear in the dis-

play.

Alter balance (left/right) and fader

(front/rear) settings.

You can switch between the operating

modes for the radio and CD changer

(optional) or AUX.

When the Radiophone is switched on,

it will play at a preset volume (VOL-

UME FIX).

VOLUME FIX can be altered as de-

sired (refer to ”Programming with DSC

– VOLUME FIX”).

The volume can also be altered using

the remote control (optional) by press-

ing V- / V+.

Fader front

Fader rear

Balance left

Balance right

Switch back from the telephone menu

to the audio source last heard.

Note: This will not function while you

are using the telephone or when you

are trying to place a call.

The settings selected will be indicated

in the display. The last setting made

will be stored automatically.

Switch off AUD: Press AUD a third

time.

If no changes are made within 4 sec-

onds, the AUD setting will end auto-

matically.

4 TA (Traffic Announcement = priority

for traffic messages)

If ”TA” appears in the display, you will

be able to tune into radio stations

which broadcast traffic information

only.

Switch priority on/off: press TA.

Switch Loudness on/off:

Press AUD for approx. 1 second. (You

will hear a beep.)

The current setting will appear briefly

in the display (ON/OFF).

5 TS / BND

Switch between the memory levels/

wavebands FM, TS (Travelstore), MW

and LW.

/ AUD

Press AUD once:

Alter treble and bass settings using the

rocker switch.

For more detailed information refer to

”Programming with DSC – LOUD-

NESS”.

Additional Travelstore function

Store the nine radio stations with the

strongest reception signals using Trav-

elstore:

Press BND until you hear a beep or

until ”TRAVELSTORE” appears in the

display.

Treble +

Treble –

Bass –

Bass +

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick reference for radio and CD changer (optional) operation

9 AF / #

Alternative Frequency for RDS opera-

6 SMS

It is possible to read any SMS messag-

Store radio stations

You can use the buttons to store the

following number of radio stations for

the different wavebands:

tion: When ”AF” appears in the display

the radio will automatically use RDS to

find the best reception frequency for

the program you are listening to.

es as they are received, regardless of

the operating mode selected.

7 PaX oder PAC (Personal Access)

Use this button to directly access a

certain function which has been pro-

grammed previously.

TS (FM-Travelstore)

Switch AF on/off: Press AF briefly.

Switch the regional function on/off:

Press AF for approx. 2 seconds

(beep), ”REGIONAL ON” or ”REGION-

AL OFF” will appear briefly in the dis-

play.

When the regional function is switched

on, ”REG” will appear in the display on

the right.

To store – In the radio operating

mode, press the station button until

you hear a beep. If you want to store

the radio station on a two-digit preset,

press ”1” briefly and then press the

second button within two seconds and

hold it down until you hear a beep.

8 Selection buttons

Radio mode

Enter the frequency directly

You can enter an FM station frequency

directly using the selection buttons:

First press ”0” and then enter the de-

sired frequency beginning with the first

digit. It is possible to enter frequencies

ranging between 87.5 and 108 only. It

is not necessary to enter the decimal

point. Press CL to cancel the entry.

Press OK to confirm your entry. Once

you have entered all of the digits, your

entry will be confirmed automatically.

: + / 0

Recall stored radio stations – Select

the desired waveband (select ”FM” or

”TS” in the FM range) and press the

corresponding button.

Activate the presets from 10 to 19 by

pressing ”1” briefly first and then

pressing the second button within two

seconds.

Press this button before you enter a

radio station frequency directly.

< MIX /

Radio operation

Switch search sensitivity:

Press button briefly.

If “lo” is highlighted, the search func-

tion will tune into strong, local stations

only (normal sensitivity).

If “lo” does not light up, the search

function will also tune into weaker,

more distant stations (high sensitivity).

CD changer mode (optional)

CDs 1 to 10 can be selected directly

(0 = CD 10).

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick reference for radio and CD changer (optional) operation

a) NDR1 NDS - Station name

CD changer operation (optional)

> Anti-theft card protection system

In order to operate the audio equip-

ment it is necessary to first insert the

KeyCard included with the unit or a

KeyCard you have trained accordingly

or a programmed SIM card.

b) CD 02

c) FM

d) LD

- CD number

MIX CD

- Radio waveband

- Loudness switched on

The tracks of a CD will be played back

in random order.

The following CDs will also be selected

at random.

e) AF

- Alternative Frequency for

RDS

f) TP

- Radio station broadcast-

ing traffic information (is

currently being received)

MIX OFF

The MIX function is switched off.

Press MIX until the desired function

appears in the display.

KeyCard

g) lo

- Search sensitivity

h) TA

- Traffic announcement

priority

Please read the information in the sec-

tion on ”KeyCards and SIM cards”

carefully.

- Call forwarding is activat-

= Display

- Indicates an SMS mes-

sage

Radio operation

Flashing card tongue

- Also appears to indicate

a special SMS message

If the radio has been switched off and

the KeyCard or SIM card removed, the

card tongue will flash as additional

theft protection if the corresponding

setting has been activated.

l) 19/T9

- Station presets (1 to 19)/

Travelstore (1 to 9)

- Connection to GSM radio

network

c d e f gh

j k

For more detailed information, please

refer to ”Programming with DSC”.

It is possible to switch off the flashing

light by pressing the card tongue in

gently until it locks into place.

- GSM signal strength dis-

play

Changer operation (optional)

o) REG

- Regional function

switched on

p) T: 11

- CD track number

- CD name

q) VIVALDI

r) 02 . 32

- CD time (elapsed play-

back time)

s) MIX

- CD track playback in ran-

dom order

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick reference for radio and CD changer (optional) operation

? Rocker switch

CD changer operation (optional)

@ ME

Unit:

Radio operation

You can have a list of the stored radio

stations with their corresponding pre-

set buttons displayed.

During CD changer operation, a list of

the CDs in the magazine will be dis-

played.

Select CD

Press

to select the radio station/

CD and press OK to confirm your se-

lection.

Down

<< / >> Up or down in increments

(for FM only when AF is switched

off)

Remote control:

Select track

Up: Press briefly.

CUE - fast forward (audible): Hold

button pressed down.

For FM only:

Down: Press two or more times

one after the other.

Restart the same track: Press

once briefly.

REVIEW - fast reverse (audible):

Hold button pressed down.

<< / >> Scroll through the station broad-

casting network when AF is

switched on

e.g. NDR 1, 2, 3, 4, N-JOY.

During radio operation, the ME button

has the same function as on the unit.

Using the remote control you can select

tracks up or down by pressing

Press

to select the radio station/

CD and press ME to confirm your se-

lection.

Additional rocker switch functions:

Additional settings possible with

AUD

DSC mode

The corresponding function must be

activated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Select operating mode

A CL (CLEAR)

Audio mode

Press this button to quit the currently

active menu item in the DSC mode.

Any changes made will not be stored.

Press CL again to quit the DSC mode.

(Radio, CD changer (optional), auxiliary

source)

In the audio mode, press SRC to switch be-

tween radio and CD changer (optional) or

an auxiliary source.

When in telephone mode, press SRC to

switch back to the audio source used last.

Telephone operation has priority. As a re-

sult, you cannot switch to audio mode if you

are talking on the telephone or trying to place

a call.

Cancels the direct entry of radio fre-

quencies.

B DSC / OK

DSC (Direct Software Control)

Use DSC to adjust the programmable

basic settings.

•

Press SRC repeatedly until the func-

tions of the audio source you wish to

listen to appear in the display.

Press to store the altered settings.

Activate DSC: Press the button briefly.

If you have inserted a magazine containing

no CDs, the display shows “NO CD”.

An auxiliary source cannot be selected un-

less a Blaupunkt changer has been connect-

ed to the system. ”AUXILIARY SOURCE

ON” must be set in the DSC menu.

Select function: Press

Display setting adjustments: Press

DSC/OK.

Alter settings: Press << / >>.

Store: Press OK.

Quit DSC: Press CL.

If you quit DSC by pressing CL before

you press OK, any changes made to

the settings will not be stored.

For more information refer to ”Pro-

gramming with DSC”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

The Radio Data System offers you added If “SEARCH” appears in the display when If you leave the service area of the regional

convenience when listening to FM radio sta- the radio is switched or one of the stored program you are currently tuned into, or if

tions.

frequencies recalled, the unit is automati- you would like to take full advantage of RDS

More and more radio stations have begun cally searching for an alternative frequen- service, switch to “REGIONAL OFF”.

to broadcast RDS information along with cy.

•

Press AF/# for approx. 1 second until

“REGIONAL OFF” appears.

their regular programs.

“SEARCH” will disappear from the display

As soon as a program has been identified, when the alternative frequency has been

the station name including a regional identi- found or after the frequency band has run

fier, if applicable, will appear in the display, through completely.

for example, NDR1 NDS (regional program If the reception quality of the selected pro-

Select a waveband

You can select between the following wave-

bands:

in Lower Saxony, Germany).

gram becomes poor:

When RDS is activated, the station preset

buttons become program buttons. You now

know exactly which program you have tuned

into, making it easy to find the desired sta-

tion quickly.

•

Tune into a different station.

87.5 - 108 MHz

MW 531 - 1602 kHz

153 - 279 kHz

REG - regional program

•

Press BND until the desired waveband

appears in the display.

Certain radio programs are split up at times

into regional programs offering local infor-

mation. The 1st program broadcast by NDR,

for example, offers programs with different

contents in the northern states of Germany

including Schleswig-Holstein, Hamburg and

Lower Saxony at certain times of the day.

If you are listening to one regional program

RDS also offers other advantages:

Station tuning

AF - Alternative Frequency

Press

cally search for the next station.

(also applies to re-

The AF (Alternative Frequency) function

makes sure that the radio always automati-

cally tunes into the strongest frequency of

the program currently selected.

If this function has been activated “AF” will

appear in the display.

•

; the car radio will automati-

and wish to continue doing so, switch RE- If you hold down

GIONAL ON by

mote control operation), search will accel-

erate in the upwards or downwards direc-

tion.

•

pressing AF/# for approx. 1 second un-

til “REGIONAL ON” appears in the first

line.

In order to switch this function on or off,

•

press AF/# briefly.

While searching for the strongest reception When the regional function has been

signal, the radio may switch to mute briefly. switched on ”REG” will appear in the dis-

play.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

This fulfils the requirements for selecting sta-

tions with << / >>.

Enter the frequency directly

For FM or FMT, it is possible to enter the

station frequency directly.

Store radio stations

Start your entry

You can store the following number of radio

stations for the different wavebands:

•

by pressing 0.

Then enter the frequency, beginning

with the first digit. You need not enter

a decimal point.

TS (FM-Travelstore)

Down

Press CL to cancel this process or OK to

confirm your entry.

<< / >> Up/Down in increments

(for FM only when AF is switched off)

•

Use BND to select the desired wave-

band.

Scroll through the broadcasting

networks (FM only)

Manual tuning with << / >>

•

Select a radio station using the rocker

switch (automatically with

ually with << / >>).

You can also tune in a station manually.

or man-

You can use the << / >> buttons to tune into

stations in your reception area.

Important:

AF must be switched off (i.e. the ”AF” or

”REG” symbol does not light up in the dis-

play).

•

Press the desired station preset for ap-

prox. 1 second until you hear a beep.

If it is possible to receive several programs

in the same broadcasting network, you can

scroll through them in the forwards direc-

tion by pressing >>, or backwards using the

<< button, e.g. NDR 1, 2, 3, 4, N-JOY.

Important: You must have tuned into these

stations at least once previously and “AF”

must be active (lights up in the display).

If you want to store the radio station on a

two-digit preset

If necessary, deactivate this function:

•

Press AF/#.

•

press ”1” briefly and then press the

second button within two seconds and

hold it down until you hear a beep.

Manual tuning:

You have now stored the radio station.

The station preset will appear in the display.

•

Press << / >>; the frequency will

change in degrees in the downwards

or upwards direction.

Start Travelstore, for example:

•

Press BND for 2 seconds; the system

will start to run through the frequency

band.

Note:

If you hold down the right or left part of the

rocker switch, the frequency scan will ac-

celerate in the corresponding direction.

If you tune into a station which has already

been stored before, then the corresponding

preset position and memory bank will flash

If “AF” does not light up,

press AF/#.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

briefly in the display if you are using the

same memory bank.

Recall stored radio stations

Alter search sensitivity

You can alter the automatic search sensi-

tivity.

If “lo” is displayed, the radio will only pick up

strong, local stations.

If “lo” is switched off, the radio will also pick

up weaker, more distant stations.

a) You can recall any stored radio station

at the touch of a button.

Automatically store the stations

with the strongest reception

using Travelstore

• Press BND/TS repeatedly until the

desired waveband appears in the

display.

You can automatically store the nine most

powerful FM stations in your current recep-

tion area in the “FMT” memory bank, sorted

according to their signal strength. This func-

tion is particularly convenient during longer

trips. This will have no effect on the radio

stations stored in the FM, MW or LW mem-

ory banks.

• Press the corresponding preset but-

ton briefly to recall the station.

To switch the search sensitivity:

•

Press

If you wish to recall a station stored on

a two-digit preset (e.g. preset 19) first

press 1 and then 9 within the next

2 seconds.

The sensitivity level can be selected sepa-

rately for each memory bank (refer to the

section on ”Programming with DSC – DX /

LO-LEVEL”).

b) You can select a radio station from the

radio station list provided for each

waveband:

•

Press BND/TS for 2 seconds.

Switch from stereo to mono

(FM only)

“TRAVELSTORE” will flash in the display.

• Press BND/TS to select the wave-

band (FM, FMT, MW, LW).

The nine strongest FM stations will be auto-

matically stored on the “FMT” (Travelstore)

memory bank.

When this process has been completed, the

radio will play the station stored on preset

button 1, which is the station with the strong-

est reception.

If desired, stations can also be stored man-

ually on the Travelstore memory bank (re-

fer to “Store radio stations”).

Every time the radio is switched on, stereo

playback will be activated automatically.

The unit will gradually switch to mono if the

reception quality deteriorates beyond a cer-

tain point.

• Press ME.

• Press

to select the desired ra-

dio station.

• Press OK on the operating panel or

ME on the remote control unit.

The radio station you have selected

will begin to play.

Download from Www.Somanuals.com. All Manuals Search And Download.

Traffic program station reception with RDS-EON

The abbreviation “EON” stands for En-

hanced Other Networks which means that

information is exchanged between the ra-

dio stations belonging to the same broad-

casting network.

Many FM broadcasters provide traffic mes-

sages for their service area at regular inter-

vals.

All traffic program stations transmit a spe-

cial carrier signal along with their programs,

which is decoded by your car radio. If this

signal is identified, “TP” will appear in the

display (Traffic Program).

In addition to these, there are also stations

which do not actually transmit traffic pro-

grams themselves, but by using RDS-EON

it is possible to receive the traffic messages

broadcast by another traffic program station

in the same radio network.

If you wish to have the priority for traffic an-

nouncements activated while listening to

one of these stations (e.g. NDR 3), “TA”

must appear in the display.

If a traffic announcement is broadcast, the

radio will automatically switch to the linked

traffic program station (in this case, NDR 2)

for the duration of the message and return

to the original program (NDR 3) afterwards.

Radiotext

Switch traffic announcement

priority on/off

This is an RDS function which transmits text

from the radio station selected.

Depending on the radio station, these texts

will vary in content, e.g. short news reports,

program information, advertising.

If the priority for traffic announcement pro-

grams is activated, “TA” will light up in the

display.

To switch the priority on or off:

For further information, refer to “Program-

ming with DSC – Radio”.

•

Press TA.

If you press TA while a message is being

broadcast, the message will be interrupted

for all operating modes for the duration of

this message only.

The unit will then switch back to its previous

status. The priority for all other traffic mes-

sages will remain active.

Please note that several buttons have no

function during traffic announcements.

Adjust the volume for traffic announce-

ments and the beep tone

Although this volume was preset at the fac-

tory, you can alter it using the DSC function

(see “Programming with DSC – TA VOL-

UME”).

Beep tone

When a traffic program station is activated

(”TA” in the display), you will hear a warn-

ing beep approx. 30 seconds after you leave

the reception area of the traffic program sta-

tion you are currently tuned into.

Download from Www.Somanuals.com. All Manuals Search And Download.

CD changer operation (optional)

You will also hear this warning beep if you You can use this equipment to conveniently

press a station preset button for a radio sta- play back CDs with one of the following Blau-

tion which does not broadcast the TP sig- punkt CD changers: CDC A06 or A 072 (di-

Select the CD and the track

Remote control

nal.

rectly) or CDC A 05 / CDC F 05 / A 071

(with an adapter).

The changer is not included with this equip-

ment and can be purchased separately at a

retail outlet.

Switch off the warning beep

a) Tune into another station providing

traffic information:

• Press the rocker switch or

Use only standard circular CDs

measuring 12 cm in diameter!

CDs measuring 8 cm in diameter or CDs in

different shapes such as a butterfly or beer

mug are not suitable for playback using this

equipment.

This may result in the destruction of the CD

or the CD drive.

We assume no liability for damage to the

equipment caused by playing unsuitable

CDs.

Select a CD

• press a preset button for a radio sta-

tion which has a traffic program sta-

tion allocated to it.

down

Enter the number of the CD you wish to se-

lect directly using the numbers keys.

b) Switch off the priority for traffic an-

nouncements:

Display the CD list by pressing ME, make

your selection with

confirm.

and press OK to

• Press TA.

“TA” will disappear from the display.

Using the remote control select a CD by

pressing ME, press

ME to confirm.

to select a CD and

Automatic search start

(CD changer operation)

Switch CD changer operation on

Selecting a track

is also possible using the remote control

up: press briefly

A magazine containing at least one CD must

be inserted.

Use SRC to switch the audio source:

If you leave the reception area of the cur-

rent traffic program station while listening to

a CD, the system

will automatically start searching for a new

TA program.

CUE - fast forward (audible): hold

pressed down

•

Press SRC until the changer functions

down: press briefly twice or repeatedly

Restart current track: press briefly.

REVIEW - fast reverse (audible): hold

pressed down

appear in the display.

To select tracks up or down with the remote

control unit, press / .

Download from Www.Somanuals.com. All Manuals Search And Download.

CD changer operation (optional)

If you want to name another CD:

Press to select another CD, press

•

Press

“Clear name”.

until the arrow marks

Enter CD names

•

You can enter names for up to 99 CDs.

OK to confirm your selection and pro-

ceed as described above.

Press OK.

If you insert a CD, its name will appear in

the display (e.g. VIVALDI) provided that you

have entered a name for it in the DSC menu

– Radio under Disc naming.

The display will show a list of all the CD

names, even those of CDs which are not

currently loaded in the magazine.

If you do not want to name another CD:

Press SRC to quit the DSC menu.

•

To clear one name:

To start your entry:

Clear

•

Press DSC/OK. Two menu items will

appear in the display: Setup and Ra-

dio.

•

Press

to select the CD whose

You can delete individual characters.

name you want to clear.

•

Press << / >> to select the character

•

Press OK briefly and the name of the

you want to delete (will flash).

•

Confirm Radio by pressing OK.

CD will be cleared.

•

Press CL briefly.

Press

until the arrow in the dis-

To clear all of the names:

If you press CL for longer than 1 second, all

of the characters will be deleted.

play marks ”Disk Naming”.

•

Press OK for longer than 1 second.

“CLEAR ALL NAMES?” will appear in

the display.

•

Press OK. “Change name” or “Clear

name” will appear in the display.

Clear CD name

Press

until the arrow marks

Press CL to return to the previous menu

without deleting any of the names.

If you press OK, all!! of the CD names will

be deleted.

If you want to clear the name stored for one

of the CDs in the magazine, select the “Disk

Naming” display mode in the DSC menu –

Radio.

“Change name”.

•

Press OK.

Press

to select the CD and press

If you want to quit this function,

OK.

•

Press DSC/OK. Two menu items will

appear in the display: Setup and Ra-

dio.

•

Press SRC to quit the DSC menu.

The first input field will start flashing.

•

Now use the numbers keys to enter

the name.

MIX

•

Confirm Radio by pressing OK.

You can enter up to 7 characters.

To complete your entry:

CD tracks can be played in random order.

If ”MIX” is illuminated in the display, all of

the tracks on a CD will be played in random

order.

Press

until the arrow in the dis-

play marks ”Disk Naming”.

•

Press OK to save your entry.

•

Press OK. “Change name” or “Clear

name” will appear in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC

Following this, the next CD will be selected

at random and played, etc.

To reprogram important DSC menu items

you must first enter an access code (refer

to the DSC menu item ”Change access

code”).

The car radio is equipped with DSC (Direct

Software Control), enabling you to adjust

settings and functions to your personal

needs and to store these settings.

Switch MIX on/off:

The equipment has been adjusted to default

settings at the factory.

There is an overview of the factory default

settings at the end of this section so that

you can reset these settings at any time.

•

press MIX/ briefly.

PaX (PAC) memory

In radio or telephone mode, the PaX mem-

ory allows you to access one certain func-

tion which has been programmed previous-

ly. In radio mode, you can store the func-

tions

If you wish to alter any programming

•

Press DSC/OK.

Two menu items will appear in the dis-

play: Setup and Radio.

Select function

<< / >> Alter setting

–

Learn card or

Select:

Radiotext on/off and activate them with

PaX (PAC):

Press

to select the menu item you wish

to alter and press OK to confirm your selec-

tion.

•

Press PaX or PAC briefly.

Alter:

Select the function

Press << / >> to alter the setting as shown

in the display.

•

Press PaX or PAC for approx. 1 sec-

ond.

A list of all the available functions will ap-

pear in the display.

Cancel:

•

Press CL. The new setting will not be

•

Press

to select the function and

saved.

press OK to confirm your selection.

Store:

•

Press DSC/OK.

Exit DSC:

•

Press SRC.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Setup

It is not possible to clear the card inserted

in the set.

Learn card

DSC menu – Setup

This menu will not appear unless a KeyCard

or the Master SIM card has been inserted.

You can train a second KeyCard or up to 30

SIM cards.

(basic equipment settings)

Learn mode

•

Press

to select “Setup”.

With this function you can determine wheth-

Refer to the information in the section on er additional cards can be programmed us-

“KeyCards and SIM cards – Training Key- ing the DSC menu only or each time the cur-

Cards/SIM cards”.

rently valid KeyCard or the Master SIM card

has been removed as well.

MENU –

Cards can only be programmed with the help

of the DSC menu.

MENU PLUS –

Additional simple method of programming

cards:

Remove the KeyCard or Master SIM card

and insert another card within 15 seconds.

This programming process can be repeat-

ed with other cards.

Card list

•

Press OK.

A maximum of four menu items will appear

It is possible to display a list containing all

of the valid SIM cards. You can delete indi-

vidual entries if you wish. You must use a

KeyCard to delete the Master SIM card.

in the display. Press

to select the menu

item you wish to alter.

WARNING!

If an entry is deleted, it is no longer possible

to operate the equipment using the corre-

sponding card.

Language

KeyCard LED

Beep

Keytones

Vario Colour

Brightness

Angle

Ignit. timer

Change code

User mode

Reset

After pressing OK you must enter the ac-

cess code. The entries can be viewed by

pressing / .

After OK ”Change name”, “Clear” will ap-

pear in the display.

Language

The display texts are available in several dif-

ferent languages.

If “AUTOMATIC” has been selected, Eng-

lish will be the language used for the dis-

play texts when the KeyCard has been in-

serted.

If a SIM card is used, the language select-

ed on the card will be the language which

appears in the display as long as it is avail-

able in the unit.

Press

to choose between Clear and

Change name.

Press CL to cancel the process, press OK

to confirm the process.

If you want to enter/change names, please

refer to ”Telephone book menu – Add en-

try”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Setup

You can choose between the following user

modes:

KeyCard LED

Angle

You can choose between LED ON or LED Adjusts the angle of the display to your per-

OFF. If you select LED ON, the KeyCard sonal preference.

tongue will flash as an additional anti-theft

device when the unit has been switched off

and the KeyCard removed.

Standard

Radio only

Any changes made will not take effect until

you have quit the menu.

Ignition timer

Use this setting to allow the car radio to play

for a maximum of 90 minutes after the igni-

tion has been switched off.

Reset

BEEP

If you select this menu item, you will be re-

quired to enter the access code after you

press OK. Enter the access code and press

OK. Press CL to cancel the process, or con-

firm by pressing OK.

Confirmation beep following functions which 0 = ignition timer switched off.

require you to press the button for longer

than 1 second.

Change code

Set volume from 0 to 9 (0 = off).

The access to important DSC menu items

(for telephone operation as well) is protect-

ed with a security code.

Three selections will appear in the display:

Radio

Keytones

Phone

SIM card.

After a key is pressed, a short beep is emit- At the factory, this code is set to ”0000”.

ted as confirmation.

Set volume from 0 to 9 (0 = off).

If you would like to alter it be sure to make

a note of the new code!

Enter the original code (in this case ”0000”)

and press OK.

Enter the new code, press OK. Enter the

new code once again, press OK.

If you select “Radio” or “Phone”, all of the

settings altered in the DSC menu including

the telephone menu will be reset to the fac-

tory default settings.

All of the trained KeyCards and SIM cards

will also be deleted, with the exception of

the KeyCard currently in the unit.

If you select “SIM card”, all of the data stored

on the SIM card will be deleted.

Vario Colour

Adjusts the colour of the display illumina-

tion to the dashboard illumination.

green .................................................... red

User mode

If you select this menu item, you will be re-

quired to enter the access code after you

press OK. Enter the access code and press

OK.

Brightness

Adjusts the brightness of the display illumi-

nation, available separately for day (D) and

night (N).

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Radio

Overview of the DSC default set-

tings (Setup)

Radiotext

DSC MENU – Radio

This is an RDS function which transmits text

from the radio station selected.

Radiotext appears in lines 2, 3 and 4. If the

Radiotext is longer than 36 characters, the

display will switch back and forth from page

1 to page 2 every 5 seconds.

•

Press

to select “Radio”.

Learn card

Card list

–

Learn mode

Language

KeyCard LED

Beep

Menu Plus*

Automatic

Off

– switched off

– switched on

•

Press OK.

Key tones

Vario Colour

Brightness

Off

green

D approx. 90 %

N approx. 60 %

Middle

On/Eng. off – switched on only when the

ignition is switched off.

Angle

Loudness

Ignition timer

Change code

User mode

Reset

00 min.

0000

Standard

–

Boosts low frequencies for more bass, es-

pecially at low volume.

LOUD 1 - minimum boost

Volume FIX

Sensitivity

Aux

Read KeyCard

Music/Speech

LOUD 6 - maximum boost

MENU PLUS = basic settings

The system will reset to MENU after having pro-

grammed the first SIM card.

TA volume

A maximum of four menu items will appear

For the adjustment of the volume for traffic

announcements and the beep tone.

Traffic announcements will be broadcast at

this volume if the standard volume is set to

a lower level.

in the display. Press

to select the menu

item you wish to alter.

If the standard volume level is louder than

TA volume, the traffic announcements will

be broadcast somewhat louder than the

standard volume.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Radio

Using the KeyCard included with the deliv- Save settings / end DSC programming:

VOLUME FIX

ery, it is possible to display the equipment

data such as name, type number (76 ...) and

serial number.

•

Press DSC/OK and CL one after the

other.

Allows you to set the volume at which the

unit switches on.

Use << / >> to set the desired volume. If

”Last Volume” is selected, the car radio will

switch on at the volume level which was last

set before it was switched off. “Last Volume”

can be activated after “Level +01".

If you remove the KeyCard while it is being

read, ”CHANGE CARD” will appear in the

display. You can read out the data on any

number of other KeyCards, including those

belonging to other equipment. You can no

longer operate the system except to switch

it off.

As soon as you have inserted a KeyCard

belonging to this unit once again, you can

press OK to return to the radio mode.

Overview of the DSC default

settings (Radio)

Radiotext

Loudness

TA Volume

Volume FIX

Sensitivity

Off

LEVEL 3

LEVEL +30

LEVEL +20

DX: High

LO: High

Off

Sensitivity

You can adjust the search sensitivity to three

different levels: high, mid-range, low.

Press << / >> to alter the setting.

DX: for distant reception

Aux

Music/Speech

Off

LO: for local reception

Music/Speech

In future, different RDS radio stations will

differentiate between music and speech pro-

grams.

The tone setting for speech programs rang-

es between ”LEVEL 1 ... 4”.

AUXILIARY SOURCE

This menu item will not appear if a CD

changer has been connected to the system.

The default setting is ”OFF”.

If an external piece of equipment is connect-

ed to the system, this setting must be

switched to ”ON”.

Off

– Music/speech is switched off.

LEVEL 1 – Linear (no bass, treble, loud-

ness adjustment)

LEVEL 2-4 – Different settings for volume,

bass and treble with loud-

ness switched off.

Test the settings to find out which one you

prefer.

Read KeyCard

This menu item will appear only if a Key-

Card is inserted.

It is possible to read out the data on a Key-

Card.

Download from Www.Somanuals.com. All Manuals Search And Download.

Telephone operation

Download from Www.Somanuals.com. All Manuals Search And Download.

Telephone operation

If the PIN code is entered incorrectly three

times in succession, it is necessary to use

the PUK code (Personal Unblock code) to

reactivate the card.

PIN code

(Personal Identification Number)

General information

Using the Radiophone, you can make the

same telephone calls as you can with a cel-

lular phone.

Normally, the SIM card will not operate the

telephone until a personal identification

number (PIN code) has been entered. This

PIN code is included with the SIM card when

you purchase it.

You can alter or even deactivate your PIN

code. Refer to ”Programming with DSC –

PIN CODE”.

Important:

Reactivating the SIM card

You must be located in an area serviced by

the GSM radio network and have the ac-

cess privileges provided by a valid SIM card.

This SIM card must be inserted into the unit

(refer to the section on ”KeyCards and SIM

cards” if necessary).

The PUK code must be used to reactivate

the SIM card.

The display shows “ENTER PUK”.

•

Enter your code and press OK to con-

firm.

Insert the SIM card/enter your

PIN code

•

Enter a new PIN code.

Emergency calls

The number to dial to place an emer-

gency call in the GSM network any-

where in the world is 112.

•

Switch the unit on.

IMPORTANT!

With the card tongue protruding, insert

the trained SIM card into the slot with

the contact surface facing up.

Be sure to make a note of the new PIN code!

You can place an emergency call by dial-

ling this number even without inserting a SIM

or KeyCard.

•

Confirm your entry by pressing OK and

repeat the entry.

”ENTER PIN” will appear in the display.

•

Enter the PIN code using the number

keys, starting with the first digit.

Please read the information in the section

on ”Telephone operation – GSM emergen-

cy calls”.

•

Press OK or #.

If the PIN code has been entered correctly,

“CODE OK” will appear in the display fol-

lowed by the menu which was used last.

If an incorrect PIN code has been entered,

“WRONG PIN CODE” will appear in the dis-

play followed by “ENTER PIN”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Telephone operation

Make your first telephone call

GSM emergency calls

When the telephone is ready to operate, an The emergency number in the GSM net-

antenna symbol will appear in the display work is 112 anywhere in the world.

(must not flash).

By dialling 112 you can place an emergen-

A trained SIM card must be inserted in the cy call, regardless of whether or not you

unit correctly. If the equipment is not cur- have inserted a SIM or KeyCard.

rently in the telephone mode

Any barring codes entered in the system will

not affect the 112 number. It is possible to

place an emergency call as long as the an-

tenna symbol is flashing and the signal is

strong enough.

•

press briefly.

The network operator will appear in the dis-

play (e.g. D1, D2).

•

Dial the number you wish to call using

the number keys.

To place the call:

•

Switch the set on, insert the KeyCard

or SIM card. If you do not enter a card,

you must complete the following oper-

ating steps within the next 4 seconds.

Otherwise the unit will switch off.

After you have entered the telephone

number correctly,

•

press

briefly.

The telephone will now place the call auto-

matically.

To end your telephone call:

•

Press

•

Press

briefly.

Dial 112 and press

“Emergency call” will appear in the display,

and the call will be placed.

Note:

If you press

by mistake when the dis-

play shows the network operator, a list will

appear in the display.

Do not use the emergency call number

unless there really is an emergency.

This list contains the last numbers dialled

using this KeyCard (a maximum of 10).

Press CL to return to the previous display.

When placing an emergency call, be sure

to supply all the necessary information as

accurately as possible. Remember that your

mobile telephone may be the only means of

communication at the scene of an accident.

Do not hang up until you are told to do so.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick telephone reference

1 On/Off

without the party on the telephone be-

ing able to listen.

5 TS / BND

To switch from handset operation to

The set must be switched on before it

is possible to use the telephone.

Volume

Adjusts the volume while using the

“hands-free” function

Adjusts the TA volume while using the

“hands-free” function

Adjusts the volume of the current ring

tone.

the hands-free function (uses the mi-

crophone and car speakers):

Press BND and return the handset to

its cradle.

3 SRC (Source)

Press SRC briefly: The telephone func-

tions will end and the set will automati-

cally switch back to the audio mode

used last (radio, Aux or optional CD

changer).

6 SMS (Short Message Service)

Use this button to directly access any

new messages received. If there is

more than one message, a selection

list will appear in the display.

Adjusts the volume of the handset for

handset operation (optional)

The telephone mode has priority. It is

not possible to switch to an audio

mode if you are already talking on the

telephone or trying to place a call.

Press SMS briefly.

Remote control

7 PaX oder PAC (Personal Access)

Use this button to directly access a

certain function which has been pro-

grammed previously.

If you press SRC briefly while the tele-

phone is ringing: the caller will receive

the information that the party he is call-

ing is unavailable (D1) or that the line

is busy (D2).

Press the button briefly.

A list of the functions you can select

directly will appear in the display:

Press the button for approx. 1 second.

Press SRC for approx. 1 second: busy

signal.

The functions described under

“Volume” can be altered by pressing

V- / V+.

Press

to select the function and

4 TA (Traffic Announcement = Priority

for traffic announcements)

press OK to save your selection.

To switch off the priority for traffic an-

nouncements during a telephone call:

Press TA during the telephone call.

8 Selection buttons

/ AUD

To enter a telephone number:

Press the corresponding keys briefly.

If this button is pressed while the tele-

phone is in use, the microphone will be

muted. This makes it possible to con-

duct a conversation in your vehicle

To use one-touch dialling to call one of

the first nine phone book numbers

stored in the set:

100

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick telephone reference

Press the corresponding key for ap-

prox. 2 seconds.

;

= Displays

Switches to the telephone mode,

Answers/ends telephone calls,

To start dialling:

Radio menu

To use one-touch-dialling to call one of

the first nine phone book numbers

stored on the SIM card:

Press

briefly.

Press , then press the corresponding

key for approx. 2 seconds.

To switch off the telephone, e.g. in are-

as where there is danger of explosion:

Press

for approx. 2 seconds.

To enter names, refer to the section on

“How to enter a name/text”.

“TELEPHONE OFF” will appear in the

display.

SIM card operation

To switch back to the telephone mode:

Press

briefly.

To display a list of the last ten tele-

phone calls made:

Press

briefly, when the network op-

erator symbol (e.g. D1, D2) appears in

the display.

GSM network search ...

To answer a call: Press one of the but-

tons on the right side of the set.

< MIX/

9 AF / #

Enters special characters, such as

blank spaces,

Enters special characters

Activates speed-dialling for the num-

bers stored on the SIM card.

Basic telephone menu

: + / 0

Enters the telephone number.

To set the current foreign country code

automatically, press 0 for longer than

1 second. “+” will appear in the display.

The phone has logged into the network

indicated.

101

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick telephone reference

- Indicates that new SMS mes-

sages have been stored

Display during a telephone call

Remote control:

- Appears as an additional indi-

cation that a voice message

has been received

- Indicates that a telephone

call is in progress or being

placed

d e f g

DSC menu during telephone mode

To select a telephone number from the

> Anti-theft card protection system

In order to be able to operate the tele-

phone, you must insert a trained SIM

card first.

speed-dial list: Press ME first.

<< / >>

Edits the menu items in the telephone

book and the DSC menu

Allows you to scroll through entries

which require more space than availa-

ble in the display

Using a KeyCard, you can place emer-

gency calls only.

Using a trained SIM card, it is possible

to operate all of the telephone’s availa-

ble functions, including the telephone

mode.

- Indicates connection to home

network

- Indicates connection to a

roaming network

Moves the cursor to the left and right

when data is being entered

If the antenna symbol is

flashing, the telephone user

has not got access privileges

to the network currently avail-

able. Only emergency calls

can be placed.

The SIM card also performs the anti-

theft functions.

@ ME

Allows you to locate telephone book

entries quickly, sorted by name or po-

? Rocker switch

sition. Press

tomatically.

to dial the number au-

- Indicates signal strength,

shows how good the connec-

tion to the radio network is

Scrolls through the speed-dial directo-

ry in the telephone book

Selects the SMS entries

Selects the menu items in the tele-

phone book and DSC menu

Displays SMS messages

Moves the cursor to the next line when

data is being entered.

Refer to the section on “Dial telephone

number”, “... from the telephone book”.

- Appears when the code is

entered. One asterisk ap-

pears for each digit.

- Indicates that call forwarding

has been activated

102

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick telephone reference

Remote control:

B DSC/OK

To activate the “setup” menu, the “call”

menu or the “telephone book” menu:

Press OK briefly.

To display the telephone-book menu in

alphabetical order: Press ME briefly.

To display the telephone-book menu in

the numerical order of the entries:

Press ME for approx. 2 seconds.

To activate a menu item:

Press OK briefly.

To store settings:

Press OK briefly.

Press

to make your selection and

to start dialling.

To quit this function press CL on the

To store altered parameters:

Press OK briefly.

set.

To return to the previous menu:

Press CL.

A CL (CLEAR)

To quit the DSC menu:

Press SRC.

Entry mode

To delete the last digit entered: Press

CL briefly.

To delete the entry in the display:

Press CL for approx. 1 second.

Menu prompting

To return to next higher level:

Press CL briefly.

To quit the menu:

Press CL for longer than 1 second.

103

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the telephone

All of the telephone functions can be oper- Switch to telephone mode

ated using a trained SIM card.

It is possible to switch to the telephone mode

from any of the audio modes.

•

With the card tongue protruding, insert

the trained SIM card into the slot with

the contact surface facing up.

•

Press

•

Press

tion, for example:

“SIM card” or “Phone” and press OK.

to choose the entry posi-

•

Switch the unit on.

If you have not yet trained a SIM card, refer

to “Train or delete KeyCards/SIM cards”.

•

Enter the new telephone number and

press OK.

GSM network service area

The display will indicate the network and the

network operator if a network signal is re-

ceived. The antenna symbol will not flash.

Use the selection buttons to enter the

name. If necessary, refer to the section

on “How to enter a name/text”. Press

OK to confirm your entry.

To be able to use the telephone, you must

be located in an area served by the GSM

network. As soon as a network signal is re-

ceived, the symbol indicating the signal

Save telephone numbers and

names

•

Enter the entry position and press OK.

strength

and an antenna symbol will ap-

If you do not enter a position, the entry will

be stored at the next available position.

If there is a number already stored at the

position entered, “Overwrite ?” will appear

in the display.

pear in the display. If the signal is not strong

enough your call may be disconnected. If

the antenna symbol is flashing, it is possi-

ble to make emergency calls only. If the

antenna is displayed on a dark background,

you are located in an area serviced by a

roaming network (may be subject to addi-

tional charges).

You can save up to 25 telephone numbers

and names (entries) in the telephone mem-

ory bank.

The number of entries you can save on the

SIM card depends on the type of card you

use.

Press OK to overwrite the entry (the previ-

ous entry will be deleted).

Add the next entry:

If you would like to save an entry, press the

following keys one after the other:

•

Press OK.

•

Press ME on the set for approx. 1 sec-

ond.

104

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the telephone

•

Press CL briefly and enter the correct

digit.

•

Press CL briefly and enter the correct

digit.

Dial a telephone number

The telephone mode must be switched on.

Press

Always use the area code for the number

you are dialling, even if it is a local number.

To delete an entire number:

Press CL for approx. 1 second.

The call will be placed automatically.

•

Using the speed-dial . . .

To start dialling/end call:

Press or CL.

You can recall telephone numbers from the

memory with the corresponding name or the

number of the entry.

•

... from the list of parties called last

The numbers which can be recalled in the

It is possible to display a list of the last ten telephone’s memory bank range from 1 to

parties called using the SIM card. 25, on the SIM card from 101 to a maximum

You can call these numbers again without of 225.

having to enter them.

It is possible to use one-touch dialling for

Press when the network operator

(e.g. D1, D2) appears in the display.

Manual dialling

the first nine telephone numbers in the ba-

sic telephone menu by pressing the corre-

sponding number key directly.

•

Dial the number using the number

keys.

A list of the last ten calls will appear in the

display.

The number you enter will appear in the dis-

play.

. . . directly from the phone memory

bank:

•

Press

to call and press

to select the party you wish

twice.

•

Press the corresponding key (1 to 9)

for approx. 2 seconds until you hear a

beep.

The call will be placed automatically.

Note

The call will be placed automatically.

If you want to call a party whose number

differs only slightly from one on the list:

. . . directly from the SIM card memory

bank:

Correct the number

To delete a digit:

•

Press

to select a party from the

list and press OK.

•

Press and the corresponding key (1

to 9) for approx. 2 seconds until you

hear a beep.

The telephone number will appear in the

display.

•

Select the digit you wish to correct us-

ing the rocker switch << / >> (digit will

flash).

•

Press << / >> to select the digit you

The call will be placed automatically.

want to alter (it will flash).

105

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the telephone

. . . from the telephone book

. . . by remote control

Answer/end a call

If you press ME briefly on the remote con-

trol unit, the alphabetically sorted speed-dial

list will appear in the display.

If you press ME longer on the remote con-

trol unit, the speed-dial list will appear in the

display sorted by position.

•

Press ME.

Use to select “Find name” or

“Find pos”.

If someone calls you, you will hear the tele-

phone ring and “Accept ?” will appear in the

display. If the calling line identification func-

tion has been switched on, the caller’s tele-

phone number will also appear in the dis-

play.

•

Confirm your selection by pressing

OK.

If the caller’s number has been stored in the

speed-dial directory, the caller’s name will

be displayed as well.

Redial function

Automatic

To answer a call:

If the “Automatic redial” menu item in the

setup menu is switched to “ON”, the number

will be redialled automatically.

•

Press one of the buttons on the right-

hand side of the set.

•

Use the selection buttons to enter up

to the first three letters in the name.

To refuse a call:

Press SRC or CL.

Refer to “Programming with DSC – Setup

menu – Automatic redial”.

•

You can cancel the automatic redial by

pressing the telephone key.

The caller will hear a busy signal.

To end a call:

•

Press

or CL.

Manual

•

Use the selection buttons to enter the

position number of the entry.

•

Press

Call waiting (2nd caller)

The last telephone numbers entered will

appear in the display.

Confirm your entry by pressing OK.

While using the telephone you can hear a

signal indicating that a second party is try-

ing to call you.

If you would like to take advantage of “call

waiting”, you may have to order this service

from your network operator and activate it.

The desired telephone number will appear

in the display.

If you want a different number to the one

shown in the display, you can press

scroll through the entries in the telephone

book.

•

Press

press

to select a number and

The call will be placed automatically.

The display will change in colour to indicate

that the telephone has begun to dial the

number or that an incoming call has been

detected.

To start dialling/end call:

•

Press

106

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the telephone

How it works

As soon as the second party answers, the

second call will be active.

Conference calls

You are still talking on the telephone to the

first party. You hear the call waiting signal.

During a conference call, you can talk to

several parties at the same time.

While talking to one party you can place a

call to a second party.

Broker’s call

To refuse the call:

Switches between the first and second call

•

Press CL.

To answer the waiting call:

Press OK.

•

Press ME.

While you are talking on the telephone to

one party, it is also possible to answer an-

other call. You will hear the call waiting sig-

nal.

Setting up a conference call

•

You are already talking to the first party. A

second party is waiting on hold.

The first party will be put on hold (cannot

join in on the second call).

Also refer to broker’s call/hold or conference

calls.

•

Press OK

To refuse the call:

to activate the conference call. Now all

three parties can talk to each other on

the same line.

•

Press CL.

To answer a call from a third party:

Press OK.

Broker’s call/hold

While you are talking on the telephone to

these two parties, it is also possible to an-

swer a call from another party. You will hear

the call waiting signal.

•

While you are talking on the telephone to

one party, it is possible to call a second par-

ty. The party you are currently talking to must

be put on hold first.

During a broker’s call, you are able to talk

to only one of these two parties at any one

time, while the second party is on hold.

This will end the call with the party to whom

you are currently talking.

To end the active call:

To refuse the call:

•

Press CL or

To end both calls at once:

Press CL for longer than 1 second.

•

Press CL.

To answer a call from another party:

•

Press OK.

The previous parties will be put on

hold.

Activate the hold function

You are talking to the first party.

Press ME to switch back and forth between

the conference call and the single caller.

•

Enter the telephone number of the

second party and start dialling by

pressing

To end the active call:

The first party will be put on hold and can

hear a melody on the line (depending on the

network provider).

•

Press CL or

To end all calls at once:

Press CL for longer than 1 second.

•

107

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the telephone

You need the network code and the

network name.

The foreign network operators must be

registered. Refer to Programming with

DSC – Calls

International calls

How to receive calls

Callers from your home country merely dial

the usual number for your mobile phone.

Callers who are not located in your home

country dial the country access code for your

home country, even if you are currently lo-

cated in another country.

The services provided by your network op-

erator allow you to place mobile phone calls

in your own country.

Using the international GSM standard it is

possible to place phone calls to parties in

many countries of the world (either mobile

or stationary).

In order to do this, the network operators

concerned must have made a roaming

agreement. Your network operator must also

activate international roaming for your SIM

card.

Your network operator can provide you with

a currently valid list of the network opera-

tors (network code and name) and the dif-

ferent rates which apply.

“Network selection” in the directions for

using the telephone.

3. Activate call forwarding from the sta-

tionary telephone (at home, at the of-

fice) to the Radiophone, if applicable.

How to place calls to a stationary tele-

phone in the host country

Dial the city area code and the party’s tele-

phone number.

You needn’t dial the country access code

because your Radiophone has registered in

the foreign network.

How to place telephone calls in foreign

countries

Dial the country access code for the coun-

try you are calling, the city area code with-

out the first “0” and then the telephone

number. You can replace the first two digits

of the country access code with “+” (press

“0” for approx. 1 second).

PaX (PAC) memory

Note:

The PaX memory allows you to directly ac-

cess one certain function which was previ-

ously saved in radio or telephone mode. In

radio mode you can save the functions

If you want to make international calls, be

sure to contact your network operator well

ahead of time.

Example:

Country access

code:

0049

Germany

–

learn card or

What to do before leaving for a foreign

country

City area code:

05121

Hildesheim

Radiotext on/off and activate them with

Teleph. number: 49 . . . . Blaupunkt

PaX (PAC).

You enter:

+49512149 . . . .

1. Have your network operator activate

your SIM card for roaming.

In telephone mode you can save the func-

tions

Tip:

2. Take a look at the list of networks. In

many areas you can choose from

among several different network oper-

ators.

–

certain number

call mailbox

send SMS

Enter the country access code for all of the

telephone numbers you save in the memo-

ry.

108

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the telephone

Programming with DSC

–

available networks

There is a relatively strong magnet

in the handset.

Thanks to DSC (Direct Software Control), it

is possible to adapt several of the Radio-

phone settings and functions to your own

personal needs and to save these altera-

tions.

call forwarding

Keep everything which could react

adversely to magnetic fields well

away from the handset. This includes

diskettes, check cards, etc. Important

data may be lost.

telephone book/find entry by name

•

Press PaX or PAC briefly.

The Radiophone has been set at the facto-

ry.

Select the function:

•

Press PaX or PAC for approx. 1 sec-

ond.

In the following you will find an overview of

the default settings, so that you can reset

the unit to these basic settings if necessary.

A list of the functions you can select directly

will appear in the display.

You cannot activate the DSC menu unless

you are in the telephone mode.

•

Press

to select the function and

press OK to confirm your selection.

To access the DSC menu

•

press DSC/OK briefly.

Make telephone calls using the

handset (accessory)

During normal operation, you can make tel-

ephone calls using the microphone and car

speakers (hands-free function). You can

also make calls using a handset (accesso-

ry).

Select:

You can answer/end calls by removing/re-

placing the handset.

To switch from hands-free to handset oper-

ation:

Press

on the rocker switch to select

the menu item you wish to alter and press

OK to confirm your selection.

•

Pick up the handset.

To switch from handset operation to the

hands-free function:

•

Press BND and replace the handset

on its cradle.

109

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Phone book

A maximum of four menu items will appear

Phone book menu

The phone book menu can be used to save,

alter, delete and easily retrieve saved tele-

phone numbers.

The entries are saved in the telephone mem-

ory bank or on the SIM card and can be re-

trieved for speed-dialling.

in the display. Use

menu items.

to select any of the

Return to the phone book (from any menu

item):

•

Press CL.

Select function

The telephone can save up to 25 entries.

The number of entries which can be saved

on the SIM card depends on the type of card

used.

<< / >> Adjust setting

How to enter a name/text

Using the numbers keys you can enter

names or texts in various menus.

You cannot make an entry unless a specific

request that you do so appears in the dis-

play.

Adjust:

Press << / >> to adjust the setting in the dis-

play and press OK to confirm your change.

Access the phone book menu as follows:

•

Press

to select “phone book”.

Names can have a maximum of 16 and texts

for short messages a maximum of 160 char-

acters.

Cancel:

•

Press CL and any changes made will

not be saved.

Start the entry

Save/confirm:

Press OK.

•

Press OK.

•

End DSC:

•

Press CL.

•

Press the key for the first character as

often as necessary.

Access

Capacity

My number

Enter all of the characters for a new name.

110

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Phone book

Enter letters/characters

Move the cursor in the input text box

Find an entry by name

Example “O” = press key 6 three times.

If you press different keys to enter the let-

ters one after the other, the flashing cursor

will automatically move forward.

If you have to press the same key to enter

different letters you must first move the cur-

sor by pressing >>.

•

Press

press OK.

to select “Find name” and

The keys are sequence keys, i.e. press the

keys repeatedly to call up the letters allo-

cated to this key.

You can use these keys to enter the follow-

ing characters:

To make any necessary corrections move

the cursor by pressing << / >>.

1 (blank) . , ! ? : ’ " ( ) % &

•

Enter up to three letters of the name

and press OK.

Insert characters

A name with these first three letters or the

closest name alphabetically in the list will

appear in the display with the correspond-

ing telephone number.

You can insert characters as follows:

•

Select the position for the new letter by

pressing << / >>. The character will be

inserted in front of the flashing cursor.

Important: The memory bank must already

contain at least one entry.

•

Press the key for the character you

wish to insert.

If necessary, press

to scroll through the

list of entries forwards/backwards until you

have found the name (and telephone

number). Press << / >> to view all of the data

stored for the entry.

Delete characters

You can delete individual characters or a

complete entry.

Capital and small letters

To delete characters:

To dial the telephone number automatical-

ly:

You can choose between capital and small

letters.

•

Press << / >> to select the character

you wish to delete (it will flash).

•

Press

To switch:

•

Press CL briefly.

•

Press the key for the letter you wish to

select for approx. 1 second.

To delete an entry:

Press CL for approx. 1 second.

•

All of the following letters will appear in the

format selected. Switch back if desired.

111

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Phone book

Using the remote control you can activate Change:

Find an entry by position

the alphabetically or numerically sorted

speed-dial directory in the telephone book

directly.

You can alter the name and telephone

number one after the other.

•

Press

press OK.

to select “Find pos.” and

For the alphabetically sorted list:

Delete:

•

Press ME briefly.

For the numerically sorted list:

Press ME for approx. 1 second.

To scroll through the lists:

Press / .

•

Press OK to confirm, CL to cancel.

Move:

•

Enter the position number using the

numbers keys and press OK.

You can move the entries to a different po-

sition in the list.

The arrow indicates the current position.

•

To dial the telephone number automatical-

ly:

•

Press

and press OK.

to select the new position

•

Press

To copy:

Press

to select a different entry.

Change, delete, move or copy an

entry

You can copy entries from the SIM card, for

example, into the telephone memory bank.

The arrow indicates the current position,

e.g. 210.

To dial the telephone number automatical-

ly:

•

Find the name/entry as described

above.

•

Press

•

Press

to select the new position,

•

Press OK.

e.g. 023, and press OK.

Select an entry by remote

control:

Copy

•

Select the function you wish to use by

pressing

and then press OK.

112

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Phone book

“All”

Add entry

Access

On – It is not possible to access the tele-

phone numbers stored in the tele-

phone memory bank or on the SIM

card. It is not possible to store new

telephone numbers.

•

Press

press OK.

to select “Add entry” and

•

Press

press OK.

to select “Access” and

Off – All of the locks have been switched

off.

Access

•

Press

for the entry, e.g.:

“SIM card” or “Phone” and press OK.

to select the memory bank

“No locks”

– No locks have been activated for

the SIM card or the phone.

•

Press

e.g.:

to select the memory bank,

•

Enter the new telephone number and

press OK.

“SIM card” or “Phone” and press OK.

Press OK to confirm your selection.

Enter your access code.

•

Capacity

Use the numbers keys to enter the

name and press OK.

Use this function to determine how much

storage capacity is available on the SIM card

and in the telephone memory bank.

Enter the position and press OK.

“Phone”

If you do not enter a position the name and

number will be saved at the next available

position.

If you enter a position which already has a

name and number allocated to it, “Over-

write?” will appear in the display.

Press OK to overwrite the previous entry

(this entry will be deleted).

On – It is not possible to access the tele-

phone numbers saved in the phone

memory bank.

•

Press

to select “Capacity” and

press OK.

Off – All of the locks have been removed

for the phone.

“SIM card”

Access

Capacity

On – It is not possible to access the tele-

phone numbers saved on the SIM

card

To add the next entry

•

Press OK.

If you are not in this menu, you can add

entries if you press ME for approx. 1 sec-

ond. (Refer to “Save telephone numbers and

names”.)

•

Press

to select “SIM card” or

Off – All of the locks have been removed

for the SIM card.

“Phone “ and press OK.

113

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Setup

“Free entries” in the display indicates the

number of free entries still available in the

memory bank.

If there are no entries available, “memory

full” will appear in the display.

Volume

Setup menu

Use this menu to alter the basic system set-

tings.

The volume can be adjusted separately for

the following functions.

•

Press

to select “Volume” and

•

Press

to select “Setup”.

press OK.

Show my phone number

You can display your own telephone number

if it has been saved.

•

Press

to select “Show my phone

•

Press OK.

number” and press OK.

Ringing tone

Press << / >> to adjust the volume of the

ringing tone from between 0 and 9. 0 = off.

If the automatic answer function is switched

on, the volume cannot be set to “0”.

Access

Capacity

My number

Ring. tones

My number

AOC param.

Audib. timer

PIN-code

Hands-free (volume)

Press << / >> to adjust the volume of the

incoming call over the car speakers from 0

to 63.

If more than one number appears, press

to select the correct one.

Ext. Alarm

TA/Call

Handset (volume)

This menu item will not appear unless a

Blaupunkt handset has been connected to

the system.

A maximum of four menu items will appear

in the display. Press

to select the menu

item you wish to alter.

Press << / >> to adjust the volume of the

handset from 1 to 10. Remove the handset

from the cradle to check the setting.

Return to the menu (from any menu item):

Press CL.

•

114

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Setup

Automatic answer

Ringing tone

Press to choose from “Standard,

Smooth, Rising (ringing tone gets louder with

each ring), Off”.

“Off” corresponds to “Ringing tone volume

= 0”.

The telephone is able to answer incoming

calls automatically.

•

Press

to select “Auto. answer”

and press OK.

•

Press

want and press OK.

to select the setting you

OFF – Redial is switched off

ON – Redial is switched on

SMS tone

If a message has been received by SMS or

voice mail, the equipment can be set to emit

a beep at a preset beep volume.

The first redial call will be placed immedi-

ately. The following calls will be placed at

preset intervals (network dependent). The

number of times the telephone will attempt

to redial depends on the network operator.

You can stop the automatic redial function

by pressing the telephone button.

•

Press

to select the setting you

On – beep is emitted after a message

has been received

want and press OK.

Off – The automatic answer function is

switched off.

Off – beep is switched off

On – The automatic answer function is

switched on. The call will be set

to hands-free operation automati-

cally. In this case, do not set the

ringing tone volume to “0”.

My number

A maximum of three of your own phone num-

bers and the phone number of your mailbox

can be entered here.

The mailbox number is required to be able

to call it directly from the call menu.

Ringing tone

You can select the ringing tone separately

for the following functions.

•

Press

to select “Ring. tone” and

Automatic redial

press OK.

If the busy signal is received, an outgoing

call can be redialled automatically.

•

Press

to select “Auto. redial” and

press OK.

Ring. tones

My number

Ring. tones

115

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Setup

Press

phone number.

to select the position for your own Note:

If your network operator does not support

Audible call timer

You can set an audible beep which is emit-

ted after a preset call time has elapsed.

Press OK and enter your own phone number AOC, the time interval will be set to one

and press OK again. Enter a name if de- minute. The value selected will be used for

sired and press OK. The number will be making calculations.

saved in the memory.

Press OK, press

to select the next po-

sition, etc.

Ring. tones

My number

AOC param.

Audib. timer

AOC parameters (Advice of Charge)

Ring. tones

My number

AOC param.

This function depends on the features the

SIM card includes.

If AOC is not supported by the card, “Charge

parameters” will appear as a menu item in

its place.

•

Press

press OK.

to select “Audib. timer” and

•

Press

press OK.

to select “AOC param.” and

The charge rates are determined by the

network operator.

Press

to set the beep to Off or the tim-

You will be required to enter the “PIN2 code”

or the “Access code”.

er to between 15 ... 300 seconds.

You can use this menu item to set the charg-

es and a credit balance. As soon as the cred-

it balance has been exhausted, it will not be

possible to use the telephone until the cred-

it balance is replenished by an authorised

person.

Use the numbers keys to alter the time in-

terval. You can select from 15 to 300 sec-

onds. The cursor will flash on the last char-

acter of the interval selected.

After this, you can enter a charge per unit

and a credit balance.

Use the numbers keys to alter the amount

and the type of currency.

After you have pressed OK, “Audible call

timer” will appear in the display. You can

select the next menu item.

Press CL to quit the menu item.

The alteration will be transferred to the SIM

card.

Note: If the credit balance is set to “0.00”,

the credit balance function is deactivated.

116

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Setup

IMPORTANT!

PIN-code

External alarm

If the PIN code is entered incorrectly three

times in succession, the SIM card will be

deactivated. It can only be reactivated after

the master PIN (PUK) has been entered.

Your service provider has more detailed in-

formation.

Switches on/off and alters the PIN code.

You can activate an external alarm, e.g. the

horn, flashing lights, to indicate that the tel-

ephone is ringing when you are outside of

the vehicle.

•

Press

to select “PIN code” and

press OK.

Off

–

The set can be operated with-

out a PIN code.

–

Each time the SIM card is in-

serted, the PIN code must be

entered.

Ring. tones

My number

AOC param.

Audib. timer

PIN-code

Ring. tones

My number

AOC param.

Audib. timer

PIN-code

Change – You must enter the currently

valid PIN code, then enter the

new PIN code (twice).

Ext. Alarm

The “Off” menu item cannot be selected

unless the SIM card allows this.

Press OK to switch between Off, On,

Change. An arrow will indicate the setting

selected last.

The following conditions must be fulfilled:

You must press

ternal alarm” function to “On”.

to switch the “Ex-

•

Press

and press OK.

to select the desired setting

The set must be switched off with the

ignition and switched on again with the

On/off button.

You must enter the PIN code and press OK

to confirm your entry.

117

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Setup

The alarm will be activated five times when

an incoming call is detected.

Quit the menu

TA (Traffic Announcement)

during a telephone call

Press CL to return to the previous menu. If

necessary,

To protect the car battery, the set will switch

off automatically after one hour.

This function can be switched on again for

one hour by pressing the on/off button on

the set.

It is possible to have a traffic announcement

(TA) broadcast while you are using the tel-

ephone.

•

press CL as often as required.

Overview of the factory default

settings in the Setup menu

•

Press

to select “TA/Call” and

press OK.

Refer to the installation instructions for in-

formation on connections and accessories.

Volume

Ringing tone

–

Hands-free

Handset

Auto Answer

Auto Redial

Ringing tones

Ring. tone

Off

Important: external alarm!

It is against the law to activate the audible

external alarm in Germany.

Find out what the regulations are regarding

this in your own country.

Ring. tones

My number

AOC param.

Audib. timer

PIN-code

Standard

–

Messages

My number

AOC parameters

Audible call timer

PIN-code

–

Off

–

Ext. Alarm

TA/Call

The setting already selected will appear in External alarm

the display.

TA/Call

TA channel

Off

Left

•

Press

to select the desired setting

and press OK.

On – TA is switched on

Off – TA is switched off during a call

If you have selected “On”, you can decide

whether you want the traffic announcement

emitted via the left-hand or right-hand speak-

er (channel).

118

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Call Menu

Call mailbox

SMS messages

Call menu

The mailbox (also called a mobile box) can You can send and receive individual text

be compared to an answering machine. You messages via the Short Message Service

can record a greeting text for your callers. (SMS). To be able to send messages, you

The texts saved in the mailbox are catego- must enter the service number of your net-

rised as old and new messages and can be work operator. Refer to “Parameters” in this

retrieved as such (depending on your net- section.

Use this menu to select the settings for net-

work operation.

•

Press

to select “Call”.

work operator).

•

Press

to select “Messages” and

Before you set up your mailbox, ask your

network operator about the mailbox tele-

phone number and other mailbox informa-

tion. You can, for example, access your

mailbox from a regular stationary telephone.

In order to use the mailbox, you must acti-

vate the call forwarding function to forward

calls to the mailbox number. If you have not

yet stored the mailbox number you will be

required to enter a telephone number when

you activate the mailbox function.

press OK.

•

Press OK.

You can read new messages you receive in

“Input”.

Call meters

Forwarding

Barring

Phone lock

User group

You can send messages in “Output”.

You can file messages in “Storage”.

•

Press

to select “Mailbox” and

press OK.

When a message is received, the telephone

will try to store it on the SIM card. As soon

as the storage capacity on the SIM card has

A maximum of four menu items will appear

in the display. Press

item you wish to alter.

been exhausted, the

symbol will flash in

to select the menu

the display. One or more messages must

be deleted before new messages can be

received.

Your phone will be connected with the mail-

box automatically. Contact your service pro-

vider for all other information required to set

up your mailbox.

To return to the Menu (from any menu item):

Press CL.

•

119

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Call Menu

Read new messages

Sending SMS messages

Press to select “Output” and

press OK.

Read/clear stored messages

Press to select “Storage” and

press OK.

If there are several different messages,

press to select the message you want

•

Press

to select “Input” and press

•

OK.

If there is more than one message, press

to select the message you want to read

and press OK.

Press to move through the message

and press OK.

When you have finished reading,

line by line forwards or backwards. Press

<< / >> to move to the left or right in the mes-

sage.

•

press CL.

“CLEAR MESSAGE ?” will appear in the dis-

play.

Select “Yes” to delete the message, select

“No” to save the message in the “Storage”.

For a completely new message, select

“New”. Under “Patterns” you can select pre-

pared texts. With “Edit” you can alter one of

the messages saved in Storage.

After you have finished reading

•

Press CL.

“CLEAR MESSAGE ?” will appear in the dis-

play.

Select “Yes” to delete the message, select

“No” to save the message in “Storage”.

•

Press

tion and press OK.

to select the desired func-

Broadcast

Cell Broadcast is a short message service

which is transmitted in numbered “chan-

nels”.

The channels send different special mes-

sages.

Contact your service provider for more de-

tailed information and a list of the available

channels.

When Broadcast is set to “On”, you must

enter the number of the channel from which

you are expecting information after press-

ing OK.

Now you can begin to enter your message.

If necessary, read the information in the

section on “How to enter a name/text”.

Calling the sender or another telephone

•

Press OK once you have completed

your message.

If you would like to call whoever sent the

message,

“Number:” will appear in the display.

•

press

play.

while the message is on dis-

•

Enter the recipient’s number and press

OK.

The telephone will automatically call the

corresponding number. If the message con-

tains a telephone number in “quotation

marks”, the call will be made to that number.

If there are several different telephone num-

bers in quotation marks, the call will be made

to the first one.

•

Press

“Both” and press OK.

to select “Send”, “Store” or

The transmission report will appear briefly

in the display.

120

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Call Menu

•

Press

press OK.

to select “Network sel.” and Press

to select another network and

Parameters

Press

sired and press OK.

press OK to confirm your selection.

“Registering in the list” will appear in the dis-

play. Press CL to cancel, press OK to con-

firm your selection.

•

to select the function de-

“VALIDITY”:

Here you can determine for how long your

network operator should try to send a mes-

sage. The standard value is one day.

Use the numbers keys to set the value from

1 to 7.

Search method

Under “Available” you can view a list of the

networks currently available.

•

Press

to select “Search method”

and press OK.

Under “Search method” you can select be-

tween automatic and manual network

searches.

Automatic – The home network is al-

ways the first choice. If you

are located in an area

After you have selected the setting

•

press OK.

Under “Pref. list” you can edit the priority list

of preferred network operators.

which is not served by your

home network, the tele-

phone will automatically

able network. The networks

will be selected according

to their priority in the net-

works list.

“Service no.”

The network operator’s service number must

be entered in your set before you can send

a message.

If you send a message, it will be sent to the

service number provided by the network

operator and forwarded from there to the

recipient.

•

Press

to make your selection and

press OK.

Available networks

Press to select “Available” and

press OK.

•

Contact your network operator to receive the

service number and enter it here.

Manual

Press

– You can select your own

network in a manual

search.

After a short waiting period a list of the avail-

able network operators will appear in the

display, e.g.

Service no.:

to select the search method,

press OK to confirm.

An arrow will indicate the current selection.

The antenna symbol indicates which net-

work the telephone is registered in.

Network selection

In areas which are served by more than one

network (e.g. in foreign countries), it is pos-

sible to select the network you wish to use.

– Connected with home network

– Connected with roaming network

121

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Call Menu

If the antenna symbol is flashing, you do not “Move”:

have access privileges to the network cur-

rently connected.

Call meters

You can move (sort) the entries on the pri-

ority list.

Press OK to confirm “Move” as your

selection.

The telephone is equipped with an internal

meter which allows you to display the charg-

es or call time for individual calls and the

total number of calls.

You can place emergency calls only.

•

Preferred networks

The position on the priority list, the name

and the network code of the network opera-

tor will appear in the display. If you want to

move the entry,

The default setting displays the call time.

•

Press

press OK.

Press

to select “Pref. list” and

•

Press

to select “Call meters” and

press OK.

•

to make your selection and

•

press OK.

Press

position on the list and press OK.

press OK.

to move the entry to a new

Call meters

“Delete”:

You can delete a network operator you no

longer require from the priority list.

•

Press

press OK:

to make your selection and

List

•

Press OK to confirm “Delete” as your

“Add”:

– known networks (“Known”)

selection.

“Last call”

•

Press

to select the network oper-

Time and charge for the last call will appear

in the display.

Press

to select the desired net-

ator you want to delete.

work from the list of network operators

and press OK. Enter priority 1 for the

network which is most important for

you. Select the networks which you are

interested in using and determine their

priorities.

Press OK to delete the network operator

from the list, press CL to cancel the opera-

tion.

“All calls”

Total call time and charges will appear in

the display.

“List”:

Press

to display the priority list.

“Rest credit”

–

new network (“New”)

Press OK to quit the menu.

You can add a new network operator

to your preferred list (you will require

the operator’s network code).

If a credit sum has been entered, the re-

maining credit amount will appear in the dis-

play.

122

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Call Menu

“Reset”

The call forwarding options will appear in

Forward calls, PC data, faxes

the display.

The timer for the time and charges is set to

zero. You must enter the access code to do

a reset.

The Radiophone can distinguish between

speech (incoming call), data (PC) or fax for

each call forwarding.

Select “Speech” to forward all incoming

calls.

In which situation should a call be

forwarded?

“During call”

“All calls”

Select “Data” to forward all PC data to a

computer connected to the telephone net-

work.

You can select whether or not you want the

call timer and charges displayed during calls.

Every incoming call will be forwarded im-

mediately.

Select “Fax” to forward written information

to a selected fax machine.

Select “All services” to forward all calls for

speech, data and fax to another number.

“If busy”

Call forwarding

(with a practical example)

The call will only be forwarded if the line is

busy (speech, data or fax).

You can forward incoming calls to another

telephone number. Select the type of call

forwarding you want to activate to “All calls”,

“If busy “, “If no answer” and “Unreachable”.

“If no answer”

•

Press

to make your selection and

press OK.

The call will be forwarded if you do not an-

swer it.

Enter data for call forwarding

The set also distinguishes between incom-

ing calls, faxes or PC data. You can acti-

vate call forwarding separately for each of

these three possibilities.

“Unreachable”

Each type of call forwarding has the same

processing list for speech, data and fax:

The call will be forwarded if the Radiophone

is switched off or you are not located in an

area serviced by GSM.

•

Press

to select “Call forwarding”

and press OK.

“Clear all”

All call forwarding functions will be deacti-

vated.

Activate

Deactivate

•

Press

to select the type of call

forwarding and press OK.

Call meters

Forwarding

123

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Call Menu

–

“Status”

Press

•

Press

press OK.

to select “Register” and

A practical example of call forwarding

to display the current selec-

Select the type of call forwarding you want

to use and whether it will apply to speech,

data or faxes.

All call forwarding can be activated in the

same way.

tion: “not registered” if call forwarding

has not been activated or

“registered” (plus call forwarding

number) if call forwarding has been ac-

tivated.

Enter the number you wish to forward

all calls to (press CL to correct if nec-

essary) and press OK again.

After a short waiting period you will see the

following display:

–

“Clear”

Example:

Call forwarding will be deleted immedi-

ately.

Forward all calls.

“Register”

•

Press

to select “All calls” and

Enter the call forwarding number here

and press OK to confirm your selec-

tion.

press OK.

•

Press

ing number to check it.

to display the call forward-

Call forwarding will be registered.

•

Press OK.

–

“Activate”

Call forwarding will be switched on.

Press

to select “Activate” and

press OK.

All service(s)

”Deactivate”

Call forwarding will be switched off.

You have activated the call forwarding func-

tion. All incoming calls will be automatically

forwarded to the number entered.

“Speech”

Press

•

to select “Speech” and

•

Press

to make your selection and

press OK.

Activate

Deactivate

124

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Call Menu

Call barring

Change “password”

Bar “incoming” calls:

You can change the password you received

for call barring from your network operator.

This password is only for the use of the net-

work services and should not be confused

with the access code for the set.

It is possible to block incoming/outgoing

calls. You will require a password from your

network operator in order to set up call bar-

ring.

“All calls”

You cannot receive any calls.

“Internation. except home”

•

Press

to select “Barring” and

If you are in a foreign country, you can re-

ceive calls made from your home country

only.

If you change the password, make sure to

make a note of the new one!

press OK.

•

Enter the old code and press OK.

Enter the new code and press OK.

Enter the new code again and press

OK.

•

Press

to make your selection and

press OK.

Call meters

Forwarding

Barring

Bar calls, PC data, faxes

Bar “outgoing” calls:

The Radiophone can distinguish between

speech (incoming call), data (PC) or fax for

each call barring.

Select “Speech” to bar all incoming calls.

Select “Data” to bar all PC data.

Select “Fax” to bar faxes.

“All calls”

No calls can be made from the Radiophone.

You can still use the emergency number.

The display will indicate the different types

of call barring.

“Internation.(al)”

Select “All services” to bar all calls for

speech, data and fax.

No calls can be made outside of the coun-

try, domestic calls only.

•

Press

to make your selection and

press OK.

“Internation. except home”

No calls can be made outside of the coun-

try. If you are in a foreign country, you can

place calls to your home country.

125

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming with DSC – Call Menu

•

Press

press OK.

Enter your access code and press OK.

Press to switch the function on/off

and press OK.

to make your selection and

Enter data for call barring

Phone lock

Each type of call barring has the same

processing list for speech, data and fax:

You can prevent your telephone from being

used by unauthorised persons. If necessary,

•

Press

to select “Phone lock” and

press OK.

User group

This is a special feature which you can or-

der from your network operator.

Using it, it is possible to limit the use of the

telephone to a certain group of users.

–

“Status”

Press

to display the current selec-

Call meters

Forwarding

Barring

tion: “not registered” if call barring has

not been activated or “registered” if

call barring has been activated.

Phone lock

–

•

“Activate”

“All” (dialling not possible)

• Enter the password and press OK.

Call barring will be switched on.

Call meters

Forwarding

Barring

Phone lock

User group

Only emergency calls can be made

”Deactivate”

“Off” (no restrictions)

• Enter the password and press OK.

Call barring will be switched off.

All locks are switched off.

“One-touch only”

Press

to make your selection and

Important!

press OK.

You can only call the one-touch dialling tel-

ephone numbers stored on keys 1 to 9 and

the SIM card.

Do not alter any of these settings unless this

function has been activated by your network

operator.

Otherwise, this could cause malfunctioning.

“Speed/one-touch only”

All of the telephone numbers stored (in the

phone and on the SIM card) can be dialled.

126

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Telephone

Amplifier

Standard:

GSM

Output power:

4 x 23 W RMS acc.

to DIN 45 324 at 14.4

4 x 35 W max. power

Frequency band:

Send

Receive

890 – 915 MHz

935 – 960 MHz

Tuner

Transmission power: Class 4 / 2 W

Wavebands:

87,5 – 108 MHz

531 – 1602 kHz

153 – 279 kHz

Sensitivity:

-108 dBm

Impedance:

Antenna connection

Hands-free microphone

50 Ohm

660 Ohm

FM sensitivity:

0.9 µV at 26 dB

signal/noise ratio.

FM transmission range:

30 - 16 000 Hz

Subject to technical modification!

127

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

Access code

BND (Band)

DSC – Direct Software Control

Barred functions can be operated after the Switches between wavebands and memo- With the help of DSC you can adjust the

access code has been entered.

ry levels.

basic factory settings and functions to your

personal needs and to store these settings.

Adapter card

Broker’s call

EON – Enhanced Other Networks

Holder for small SIM cards. With the help of It is possible to make a second call without

an adapter card, it is possible to use small ending the first one. You can then switch EON is an RDS service which makes it pos-

SIM cards in from one call to the other. sible to exchange station information within

equipment which was otherwise designed You can also answer a call from a second a station network chain. The radio will, for

for use with standard-sized SIM cards.

party without ending the call to the first.

example, automatically switch from a non

TA station to a TA station in the same radio

network in order to broadcast a traffic an-

nouncement. After the traffic announcement

has been broadcast, the radio will switch

back to the previous network once again.

AF – Alternative Frequency

Call waiting

This function enables the equipment to au- A quiet beep during a telephone call informs

tomatically select the best available frequen- you that someone is trying to reach you.

cy for the reception of an RDS programme.

Cell Broadcast

GSM network - Global System for Mobile

Communication

Amplifier

Cell Broadcast is a short message service

Amplifies the output power.

which operates in numbered “channels”.

The channels transmit different special mes-

sages.

European cellular telephone standard avail-

able world-wide

AOC parameter - Advice of Charge

Request more detailed information and a list

of the available channels from your network

operator.

List of charges in which a charge per unit

and a credit balance can be entered.

Handset

Telephone receiver complete with cradle

(accessory).

AUD – Audio

Changer

Tone adjustments for bass and treble, fad-

er (front and rear) and balance (left and

right).

CD changer (accessory)

CL – Clear (delete)

Returns to previous menu.

128

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

IMEI - International Mobile Equipment Iden- MUTE

Radiotext

tity

Switches audio off

Additional RDS information provided by the

station, for example, on the program broad-

cast.

International identity for mobile equipment.

The IMEI code entered at the factory in- PAC (PaX) – Personal Access

cludes the serial number, manufacturer and

country code. You can find this code in the

car radio pass.

Allows direct access to a function in radio

or CD mode which was previously stored.

RDS – Radio Data System

Service provided by radio stations for more

PIN code - Personal Identification Number convenient radio listening pleasure.

KeyCard

The station name appears in the display, for

example, rather than the frequency.

PIN 1

Theft protection system from Blaupunkt. The

equipment cannot be operated without the

corresponding KeyCard.

SIM cards (telephone cards) or a second

KeyCard can only be trained using the orig-

inal KeyCard.

Prevents your SIM card from being used by

unauthorised persons. You must enter the Other RDS functions include:

PIN code each time you insert the SIM card.

AF – Alternative Frequency

EON – Enhanced Other Networks

Radiotext

TA – Traffic Announcement

PIN 2

Code required for special functions.

If you have authorisation for the use of spe-

TP – Traffic Program

Mailbox

cial functions with your card, you need a PIN

Electronic mailbox provided by network op- 2-code.

erators for spoken messages. The mailbox

Roaming

Both codes come with the SIM card and can

Making telephone calls in foreign countries

with your own telephone or your own SIM

card using a different network operator.

can be compared to an answering machine.

be altered.

ME – Memory

PUK - Personal Unblock code

Retrieves stored data, such as radio sta-

tions, telephone numbers.

Eight-digit unblock code which can reacti- Scrolling

vate the SIM card. This becomes necessary

Moves you through a directory.

if the PIN code for the SIM card has been

entered incorrectly three times.

MIX

CDs/CD tracks are played in random order. The PUK code comes with the SIM card and

cannot be altered. Make sure you keep it in

a safe place.

129

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

SIM card - Subscriber Identification Mod- SRC – Source

ule

Switches audio source between radio and

For radio and telephone operation. The SIM CD changer.

card used here is in credit-card format. It is

also possible to use the small SIM card TA – Traffic Announcement (priority for traf-

(plug-in card) with an adapter card.

The SIM card contains all of the data re-

quired to identify the subscriber, to allocate

the telephone number and the personal

phone book.

fic messages)

“TA” in the display indicates the traffic an-

nouncement priority is switched on.

TP – Traffic Program

Using your SIM card it is also possible to

make telephone calls with a cellular phone.

“TP” in the display indicates that the radio is

currently receiving a radio station which

broadcasts traffic information.

SMS - Short Message Service

Using this function it is possible to send other

subscribers messages up to 160 characters

in length, even if the recipient’s cellular

phone is not switched on or a call cannot be

put through at the present time.

The text is stored in the network until the

recipient retrieves it or the time allowed by

the sender expires.

TS – Travelstore

Automatically stores the radio stations with

the strongest reception signals, can be re-

trieved by pressing the station preset but-

tons. Very useful on trips.

User group

It is possible to limit the use of the telephone

to a certain group of users. Your network

operator can provide more detailed informa-

tion.

Speed-dial

This function allows you to dial telephone

numbers at the touch of a button.

130

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Delete an entry

Delete SIM card authorisations 78

Dial a telephone number 105

Disk Naming 90

A practical example of call

forwarding 124

Access 113

Call barring 125

Call forwarding 123

Call menu 119

Call meters 122

Call waiting 106

Display symbols 82

Add an entry 113

DSC learn mode 78

DSC phone book 110

DSC telephone 109

Adjust the volume for traffic

announcements and the beep

tone 88

Capacity 113

Card list 92

Alter the volume 80

Alternative frequency 85

Angle 93

Answer a call 106

Anti-theft protection 78

AOC parameters 116

Audible call timer 116

Audio mode 84

Automatic answer 115

Automatic redial 115

Automatically store with the stronges

reception 87

Care of your KeyCard 79

Care of your SIM card 79

CD changer operation 89

Cell Broadcast 120

Change an entry 112

Change code 93

Change password 125

Charge parameters 116

Charges 122

Check KeyCard 76

Clear 84

Clear CD name 90

Combination antenna 75

Conference calls 107

Copy an entry 112

Effects of RF (radio frequency)

energy 73

Emergency calls 74, 98

End a call 106

Enter a name 110

Enter a text 110

Enter CD names 90

Enter letters/characters 111

Enter the frequency directly 86

Enter your PIN code 98

EON 88

Auxiliary source 95

External alarm 117

Bar incoming calls 125

Bar outgoing calls 125

BEEP 93

Beep tone 88

Brightness 93

Find an entry 112

Flashing card tongue 82

Forward calls, PC data, faxes 123

Default settings (Radio) 95

Default settings (Setup) 94

Default settings in the telephone setup

menu 118

Broadcasting networks 86

Broker’s call 107

131

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Programming with DSC 91

PUK code 98

Glossary 128

Language 92

GSM emergency calls 98, 99

GSM network service area 104

GSM radio telephone standard 73

Learn card 92

Learn mode 92

Leaving for a foreign country 108

Loudness 94

Quick telephone reference 100

Quitting the DSC menu 118

Hands-free volume 114

Handset 75, 109

Handset volume 114

Hold function 107

Radio pass data 78

Radiotext 88, 94

RDS - Radio Data System 85

Read KeyCard 95

Read new messages 120

Recall stored radio stations 87

Redial function 106

Regional program 85

Remote control 75, 83, 106

Reset 93

Mailbox 119

Make your first telephone call 99

Manual dialling 105

MIX 90

Move an entry 112

Music/Speech 95

My number 115

Ignition timer 79, 93

Important: external alarm 118

Installation 74

International calls 108

International roaming 108

Invalid KeyCard 76

Network selection 121

No CD 84

Ringing tone 115

Ringing tone volume 114

Roaming 108

KeyCard 76

Parameters 121

KeyCard error 76

KeyCard LED 93

KeyCard tongue 78

Keytones 93

PaX 91, 108

PaX memory 108

Phone lock 126

Phone memory bank 105

PIN code 98, 117

PIN code entered incorrectly 117

PIN2 code 116

Preferred networks 122

Safety information 73

Safety standards 73

Save telephone numbers and

names 104

Second KeyCard 76

Second SIM card 76

Select an entry by remote control 112

132

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Selecting a CD 89

Selecting a track 89

Sending SMS messages 120

Sensitivity 95

Traffic safety 73

Train KeyCard 77

Train SIM card 77

Travelstore 87

Service no. 121

Service number of your network

operator 119

Show my phone number 114

SIM card memory bank 105

SMS messages 119

SMS tone 115

User group 126

User mode 93

Using the telephone while driving 73

Using the telephone in critical areas 74

Specifications 127

Speed-dial 105

Vario Colour 93

Voice control system 75

Volume 114

Static electricity 75

Station tuning 85

Store radio stations 86

Stored messages 120

Switch CD changer operation on 89

Switch from stereo to mono 87

Switch the radio on when the ignition is

switched off 79

Volume FIX 95

Waveband 85

Wrong PIN code 98

TA volume 94

Telephone book 106

Telephone calls in foreign countries 108

Telephone off 74

Telephone setup menu 114

Traffic Announcement during a

telephone call 118

Traffic program station reception 88

133

Download from Www.Somanuals.com. All Manuals Search And Download.

Blaupunkt-Werke GmbH

Bosch Gruppe

3/98 PfTs

K7/VKD 8 622 401 054 (D/GB)

0188

Download from Www.Somanuals.com. All Manuals Search And Download.

Beko Washer Dryer WMG 10454 W User Manual
Beko Washer WMB71442S User Manual
Belkin Network Router F5D9230UK4 User Manual
Belkin Network Router PM00781EA F5D8635 4 User Manual
Belkin Printer Accessories F5U002 User Manual
Black Box Switch Code Operated Switch 16 User Manual
Cables to Go Switch 39962 User Manual
Cabletron Systems Switch 9C300 1 User Manual
Canon Printer C2550 User Manual
Chevrolet Automobile 50061011 User Manual