™
OmniView
PRO2 Series KVM Switch
User Manual
F1DA104T
F1DA108T
F1DA116T
PRO2 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
™
OmniView
PRO2 Series KVM Switch
Congratulations on your
purchase of this Belkin
OmniView PRO2 Series KVM
Switch (the PRO2). Our diverse
line of KVM solutions exemplifies the Belkin commitment to
delivering high-quality, durable products at a reasonable price. Designed to
give you control over multiple computers and servers from one console,
Belkin PRO2s come in a variety of capacities suitable for all configurations,
large or small.
Belkin has designed and developed this PRO2 with the server administrator
in mind. The result is a KVM Switch that surpasses any other switch on the
market. The PRO2 is engineered to work with the most advanced server room
and laboratory environments, offering intuitive port indicators, direct-access
port selectors, high video resolution support, and flash upgradeable firmware.
The PRO2 also comes with an unparalleled Belkin Five-Year Warranty.
This manual will provide details about your new PRO2, from installation and
operation to troubleshooting—in the unlikely event of a problem.
For quick and easy installation, please refer to the Quick Installation Guide
included in your PRO2 packaging.
Thank you for purchasing the PRO2. We appreciate your business and have
confidence that you will soon see for yourself why over 1 million Belkin
OmniView products are being used worldwide.
Package Contents
• OmniView PRO2 Series KVM Switch
• Adjustable Rack-mount Brackets with Screws
• DB25-to-RJ45 Parallel Flash Cable
• User Manual
• Quick Installation Guide
• 12-Volt DC, 1-Amp Power Supply
• Registration Card
1
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
The PRO2s allow you to control up to a maximum of 256 computers with one
keyboard, monitor, and mouse. They support PS/2 input devices (keyboard
and mouse) as well as VGA, SVGA, XGA, and XGA-2 video.
They support both PS/2 and USB output. This enables cross-platform control
™
over PCs and USB-based computers including USB Sun workstations and
®
Mac computers.
Feature Overview
Hot Keys:
Hot key functionality allows you to select a desired port using designated key
commands. By using a simple hot key sequence on your keyboard, selecting
one computer from as many as 256 computers is instantaneous. For a listing
of complete hot key instructions and commands, see pages 17-19.
AutoScan:
The AutoScan feature allows you to set your PRO2 to scan and monitor the
activities of all operating computers connected to the switch—one by one.
The time interval allotted for each computer can be defined or adjusted
through the On-Screen Display (OSD) menu. For complete instructions on
AutoScan usage, please refer to page 18.
Video Resolution:
Through a 400MHz bandwidth, the PRO2s support video resolutions of up to
2048x1536@85Hz. To preserve signal integrity at these higher resolutions,
your PRO2 requires 75-Ohm coaxial VGA cabling.
Flash Upgrade:
Flash upgradeable firmware allows you to install the latest firmware for your
PRO2. This enables your PRO2 to maintain consistent compatibility with the
latest devices and computers. Firmware upgrades are free for the life of your
PRO2. Refer to the enclosed flash upgrade instruction document or visit us
at belkin.com for complete upgrade information and support.
On-Screen Display (OSD):
The OSD feature simplifies server management by allowing you to assign
individual names to each connected server throughout the system. It provides
a visual means of switching between computers and setting the time interval
for the AutoScan function.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
Front-Panel Push Button:
Direct-access port selectors, located conveniently on the front panel of the
PRO2, allow for simple, manual port-selection. Each button controls a port.
LED Display:
An LED display on the face of the PRO2 serves as a status monitor. An LED
next to each direct-access port selector illuminates to indicate that the console
currently controls the corresponding computer. As a port selector is pushed,
the LED next to it will light up. A flashing port LED indicates that there is no
computer connected to that port.
Seven-Segment LED Display:
When daisy-chaining multiple PRO2s together, the seven-segment LED display
serves as a quick indicator of the selected BANK.
Equipment Requirements
Cables:
To connect to the PRO2, each PS/2 computer requires one VGA cable, one
PS/2 keyboard cable, and one PS/2 mouse cable. Keyboard and mouse cables
must have PS/2 male-to-PS/2 male connectors. Each USB computer requires
one VGA cable and one USB A-to-B cable.
Video resolution support of up to 2048x1536@85Hz requires use of a
75-Ohm coaxial VGA cable to preserve signal integrity. VGA cables must
have HDDB15 female-to-HDDB15 male connectors.
Belkin highly recommends that you use OmniView All-In-One PRO Series
Plus or Gold Series Cables. These cables offer the highest quality possible to
ensure optimal data transmission. All-In-One Cables are molded together for
a clean and organized setup; are double-shielded to reduce EMI/RFI
interference; have strain-relief construction for added durability; come with a
ferrite bead for noise immunity; and include PC99 color-coded connectors for
easy identification and connection. The PRO Series Plus Cables include an
industry-standard, 14-pin, coaxial VGA cable and nickel-plated connectors
for high-resolution applications. The Gold Series Cables have a custom,
15-pin, coaxial VGA cable and gold-plated connectors for superior clarity,
connectivity, and error-free data transmission. OmniView Cables are
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
available in both USB and PS/2 connector types. The following cables are
recommended for your PRO2:
OmniView All-In-One PRO Series Plus
F3X1105-XX
F3X1962-XX
(PS/2 Style)
(USB Style)
USB Style
PS/2 Style
OmniView All-In-One Gold Series
F3X1835-XX-GLD
F3X1895-XX-GLD
(PS/2 Style)
(USB Style)
(-XX denotes length in feet)
Operating Systems
OmniView PRO2 Series KVM Switches are for use on CPUs using:
Platforms:
• Windows 95/98/2000/Me/NT /XP
• DOS
®
®
®
®
• Turbolinux and all Linux distributions
®
®
• Novell NetWare 4.x/5.x
• Mac (with USB support)
• Sun (with USB support)
Keyboards:
• Supports 101-/102-/104-key keyboards
Mice:
®
• Microsoft system-compatible PS/2 or PS/2 & USB combo mice
(with PS/2 adapter) having 2, 3, 4, or 5 buttons
• Microsoft system-compatible PS/2 wireless or optical mice
Monitor:
• VGA
• SVGA
• MultiSync
®
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
Side View of the PRO2:
F1DA108T
BANK DIP switch
FLASH DIP switch
(may be located on the
back in some models)
(may be located on the back
in some models)
BANK
FLASH
1
2
3
4
5
6
1
2
3
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
Front View of the PRO2:
F1DA108T
LED for selected
port identification
7-segment LED for
selected BANK identification
AutoScan button
Direct-access
port selector
Manual BANK
scroll buttons
Back View of the PRO2:
F1DA108T
Console VGA
Computer VGA port
Computer USB port
USB04
USB 03
Console PS/2 mouse/keyboard ports
Flash upgrade port
Master Input/Slave Output
Slave Input
Computer PS/2
mouse/keyboard ports
DC power jack
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
Specifications
Part No.: F1DA104T, F1DA108T & F1DA116T
Power: 12-Volt DC, 1-Amp power adapter with center-pin positive polarity
Daisy-Chain: Maximum of 16 KVM Switches
Computer Connections Supported:
4 (F1DA104T)
8 (F1DA108T)
16 (F1DA116T)
Keyboard Emulation: PS/2
Mouse Emulation: PS/2
Monitors Supported: VGA, SVGA, MultiSync, and LCD (optional adapter may
be required)
Max. Resolution: 2048x1536@85Hz
Bandwidth: 400MHz
Keyboard Input: 6-pin miniDIN (PS/2)
Mouse Input: 6-pin miniDIN (PS/2)
VGA Port: 15-pin HDDB type
Port LED Indicators: 4 (F1DA104T)
8 (F1DA108T)
16 (F1DA116T)
Enclosure: Metal enclosure with high-impact plastic faceplate
Dimensions:
(F1DA104T) 11 x 1.75 x 6 inch (279mm x 44.5mm x 150mm)
(F1DA108T)17.25 x 1.75 x 7.5 inch (438mm x 44.5mm x 190mm)
(F1DA116T) 17.25 x 3.5 x 7.5 inch (438mm x 89mm x 190mm)
Weight:
(F1DA104T) 5.3 lbs. (2414.5 grams)
(F1DA108T) 9.2 lbs. (4181.5 grams)
(F1DA116T) 12 lbs. (5472.5 grams)
Operating Temp.: 32° to 104° F (0~40° C)
Storage Temp.: -4° to 140° F (20~60° C)
Humidity: 0-80% RH, non-condensing
Warranty: 5 years
Note: Specifications are subject to change without notice.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Pre-Configuration
Where to Place the PRO2:
The enclosure of the PRO2 is designed for standalone or rack-mount
configuration. The 8- and 16-port PRO2s are natively rack-mountable in
standard 19-inch server racks. Rack-mount hardware is included with these
switches for a study rack installation. An optional rack-mount kit (F1D005) is
available for use with the 4-Port PRO2.
Consider the following when deciding where to place the PRO2:
• whether or not you intend to use the direct-access port selectors;
• the lengths of the cables attached to your keyboard, monitor, and mouse;
• the location of your CPUs in relation to your console;
• and the lengths of the cables you use to connect your computers to the PRO2.
Cable Distance Requirements:
For PS/2 computers:
VGA signals transmit best up to 25 feet. Beyond that length, the
probability of video degradation increases. For this reason, we recommend
that the length of the cables between the PRO2 and the connected computers
does not exceed 25 feet.
Note:
If you need your console to reside further than 25 feet from the PRO2, we
recommend using the Belkin CAT5 Extender (F1D084) with a standard CAT5
UPT cable. By using this device, you may increase the distance between
your PRO2 and your keyboard, mouse, and monitor by as much as 500 feet
without risking signal degradation.
For USB computers:
USB signals can be transmitted up to 15 feet between the PRO2 and the CPU.
Beyond 15 feet, the probability of signal failure is likely, and this may cause
the device to fail.
Cautions and Warnings:
Avoid placing cables near fluorescent lights, air conditioning equipment, or
machines that create electrical noise (e.g., vacuum cleaners).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Step-by-Step Installation Guide
Cautions and Warnings:
Before attempting to connect anything to the PRO2 or your computer(s),
please ensure that everything is powered off. Plugging and unplugging cables
while computer(s) are powered on may cause irreversible damage to the
computer(s) and/or the PRO2(s). Belkin Components is not responsible for
damage caused in this way.
Installing the PRO2 into a Server Rack:
Bracket Installation (F1DA108T and F1DA116T only)
Eight- or 16-Port PRO2s include adjustable mounting brackets ideal for
installation in 19-inch racks. The mounting brackets feature three adjustment
positions to allow the faceplate of the PRO2 to mount flush to your rack-mounted
servers, or to the rack. Please follow these simple steps to achieve the desired
adjustment. The 4-Port PRO2 requires an optional mounting kit (F1D005).
1. Remove the adjustable brackets from the box. (The adjustable brackets
allow you to set the PRO2’s face flush with the ends of the rails or to
extend the PRO2 past the front of the rails).
2. Determine how far you would like the PRO2 to protrude from the rack.
Select a bracket-hole scheme.
3. Attach the bracket to the side of your PRO2 using the Phillips screws
provided. (Refer to diagram above).
4. Mount the PRO2 to the rack rail assembly.
Note: If this PRO2 will be daisy-chained to another PRO2, set the BANK
address prior to installing on a rack. Refer to the section in this user manual
labeled “Connecting Multiple PRO2s (Daisy-Chaining)”.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Your PRO2 is now mounted securely into the bracket and you are ready to
connect cables to the back of the unit.
Note for Belkin PRO Series owners (F1D104-OSD, F1D108-OSD,
F1D116-OSD): Installation for the PRO has changed. Please follow this
installation manual completely to assure proper installation. Failure to do
so may result in keyboard or mouse errors, and/or faulty operation.
Single PRO2 Installation
This section provides complete instructions for the hardware setup of a single
PRO2. (F1DA104T, F1DA108T, and F1DA116T)
PS/2 Installation:
Keyboard, Video, and Mouse Connections
Connect the Console:
1. Connect the monitor to the
PRO2. Attach your monitor
cable to the HDDB15 female
port on the back of the PRO2
labeled "Console VGA".
VGA08
VGA07
07
06
VGA
06
VGA05
VGA
04
VGA
03
VGA
02
02
VGA
USB08
USB07
USB06
USB 05
USB04
USB 03
VGA01
01
USB02
USB01
2. Connect the PS/2 keyboard
cable to the keyboard port
on the back of the PRO2
in the "Console" section.
08
06
05
04
03
VGA07
07
06
VGA
06
VGA
05
VGA
04
VGA
03
VGA
VGA
08
VGA
02
02
USB08
USB07
USB06
USB 05
USB04
USB 03
VGA01
01
USB02
USB01
08
06
05
04
03
3. Connect the PS/2 mouse
cable to the mouse port on
the back of the PRO2 in
the "Console" section.
F
9
F
10
F11
n
u
m
ca
p
l
o
ck
l
o
ck
p
g
u
p
-
=
H
OM
E
PG
D
N
=
8
/
-
delete
PG
U
P
1
2
3
4
5
6
7
8
9
0
`
7
9
H
E
C
A
PS
P
[
]
L
P
+
4
1
0
5
2
6
3
K
L
;
:
'"
return
E
S
C
OPT
PC
sh
i
f
t
clt
^
<
+
>
a
l
t
Attach the power supply to the DC power jack labeled "DC 12V, 1A" located
on the rear of the PRO2. Once the power is connected to a power source, the
LED for port 01 will begin flashing. Sequentially push the direct-access port
selectors for ports 01 through 08 (04 for F1DA104T and 16 for F1DA116T).
The corresponding LED should flash as each button is pressed, indicating that
the port is ready for connecting your servers (computer connection).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connect the Computer:
PS/2 Installation
1. Using an OmniView KVM Cable (Belkin part# F3X1105-XX or
F3X1835-XX-GLD), plug in the male VGA connector to the VGA port
on the computer. Connect the other end (the female connector) of the
VGA cable to the back of the PRO2 labeled "VGA 01".
2. Connect the PS/2 keyboard and PS/2 mouse connectors of the cable to
the keyboard and mouse ports on the computer. Connect the other ends
of the cables to the keyboard and mouse ports located directly underneath
VGA 01 on the PRO2 (Belkin part # F3X1105-XX or F3X1835-XX-GLD).
VGA07
07
06
VGA
06
VGA
05
VGA
04
VGA03
VGA
VGA08
VGA
02
02
USB08
USB07
USB06
USB 05
USB04
USB 03
VGA01
01
USB02
USB01
08
06
05
04
03
3. Repeat steps 1 and 2 for each
additional PS/2 computer you
wish to connect.
USB Installation:
Boot the computer you wish to connect via USB as you would normally with
the keyboard, monitor, and mouse connected directly to the computer. After
the operating system finishes loading, connect the PRO2 to the USB computer
using the USB A-to-B cable that is part of your USB KVM Cable (Belkin part#
F3X1962-XX or F3X1895-XX-GLD). Your computer should recognize your
PRO2 and automatically install the HID USB driver if necessary. Once your
computer finishes installing the USB driver, you can power down your
computer to connect it to the PRO2.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
1. Using a USB KVM Cable (Belkin part# F3X1962-XX or F3X1895-XX-GLD),
plug the male VGA connector into the VGA port on the computer.
Connect the other end (the female connector) of the VGA cable to
the back of the PRO2 for the appropriate port you wish
to connect to (for example, "VGA 02").
2. Connect the
VGA07
07
06
VGA
06
VGA
05
VGA
04
VGA03
VGA
VGA08
VGA
02
02
USB08
USB07
USB06
USB 05
USB04
USB 03
VGA01
01
USB02
USB 01
08
06
05
04
03
USB cable's
"A-type"
connector to an available USB port on your USB
computer. Connect the other end of the USB cable
(with the "B-type" connector) to the corresponding
port on the back of the PRO2 (for example, "USB 02").
NOTE: We recommend you attach the KVM cable directly to a free USB port
on your computer.
Repeat steps 1 and 2 above for each additional USB computer you wish
to connect.
Connecting Multiple PRO2s (Daisy-Chaining)
You can daisy-chain up to 16 PRO2s together, giving a server administrator
control over a maximum of 256 computers. When daisy-chained together,
each unit is referred to as a "BANK" and assigned an address. The Console
keyboard, mouse, and monitor connects to BANK 00 and is referred to as the
"Master" switch. BANKs 01 through 15 are referred to as "Slave" switches.
Note: A daisy-chain cable (F1D108-CBL) is required to daisy-chain each
PRO2 and is available through your Belkin reseller or online at belkin.com.
All PRO2s feature a “BANK DIP” switch. The BANK DIP switch is used for proper
identification and use of PRO2s in a single-unit or daisy-chain configuration.
• For a single-unit configuration, set the BANK DIP switch on the PRO2 to the
“Master” (BANK address 00) setting. This is the factory default setting.
• For multi-unit configuration, the BANK DIP switch on the Master unit must
be set to “BANK address 00”. Slave units must be set to a unique BANK
address (from 01 through 15). Refer to the chart below for BANK DIP
switch settings.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
BANK DIP Switch Configuration Chart
DIP SWITCH#
BANK ADDRESS
1
2
3
4
5
6
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON BANK 00 MASTER (default)
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
BANK 01 SLAVE
BANK 02 SLAVE
BANK 03 SLAVE
BANK 04 SLAVE
BANK 05 SLAVE
BANK 06 SLAVE
BANK 07 SLAVE
BANK 08 SLAVE
BANK 09 SLAVE
BANK 10 SLAVE
BANK 11 SLAVE
BANK 12 SLAVE
BANK 13 SLAVE
BANK 14 SLAVE
BANK 15 SLAVE
Note: “On” is the down position.
Example:
Four 8-Port PRO2s (F1DA108T) are daisy-chained together for controlling
up to 32 computers. The DIP switch on the Master unit is set to “BANK 00”
(factory default) and the Slave units are each set to a unique BANK
(between 01 and 15).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Installation
Before You Begin:
1. Make sure that all computers are powered off and that each PRO2 has
been assigned a unique BANK address.
2. Place Master and Slave switches in the desired location. Make sure all
are turned off and unplugged from the power source.
3. Connect the Console monitor, keyboard, and mouse to the Console
ports of the Master switch or Bank 00, as described previously in this
installation guide.
Connecting the Master Switch to the First Slave Switch:
4. Using the daisy-chain cable (F1D108-CBL), connect one end of the cable
to the “Master Input/Slave Output” port on the Master switch (BANK 00).
5. Connect the other end of the daisy-chain cable to the “Master Input/Slave
Output” port of the first Slave switch (BANK 01).
Adding Additional Slave Units:
6. Using the daisy-chain cable (F1D108-CBL), connect one end of the cable
to the available daisy-chain port labeled “Slave Input” on the Slave switch
(for example, BANK 01).
7. Connect the other end of the daisy-chain cable to the “Master Input/Slave
Output” port of the Slave switch that you are adding
(for example, BANK 02).
8. Repeat steps 6 and 7 for additional PRO2s you wish to
daisy-chain together.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Example of Daisy-Chain Configuration:
Slave Input
VGA
08
VGA07
06
VGA
06
VGA
05
VGA
04
VGA03
VGA
02
02
VGA
USB08
USB06
USB 05
USB04
USB 03
VGA01
01
USB02
USB01
Master
I
npu
t
/Slave
Output
USB07
07
06
05
04
03
08
Master unit (BANK 00)
cable 1
Slave Input
VGA
08
VGA07
07
06
VGA
06
VGA
05
VGA
04
VGA
03
VGA
02
02
VGA
USB08
USB07
USB06
USB 05
USB04
USB 03
VGA01
01
USB02
USB01
Master
Input /Slave Output
08
06
05
04
03
Slave unit (BANK 01)
cable 2
cable 3
S
l
ave Input
VGA07
07
06
VGA
06
VGA
05
VGA
04
VGA
03
VGA
VGA
08
VGA
02
02
USB08
USB07
USB06
USB 05
USB04
USB 03
VGA01
01
USB02
USB01
Maste
r
I
nput /Slave Output
08
06
05
04
03
Slave unit (BANK 02)
Slave Input
VGA
08
VGA07
06
VGA
06
VGA
05
VGA
04
VGA
03
VGA
02
02
VGA
USB08
USB07
USB06
USB 05
USB04
USB 03
VGA01
01
USB02
USB01
Master
Input /Slave Output
08
07
06
05
04
03
Slave unit (BANK 03)
Connecting the Computers:
9. Connect all computers to the Master and Slave switches. Refer to
“Single PRO2 Installation” on page 10 for instruction on how to connect
the Console and the computers to the PRO2.
10. Connect the power supply to the Master switch. Power up the Master
switch. You should see the Master switch light up and display the digits
“00”, indicating its BANK address.
11. Power up the Slave switches sequentially, beginning with Bank 01, by
connecting each unit’s power supply. Each switch should display its
corresponding BANK address number as it is powered up.
Note: If the PRO2s do not enumerate correctly, reset the Master switch
(BANK 00) by simultaneously pressing the "BANK +" and "BANK –" buttons.
You can also reset the Master switch to detect newly added Slave switches.
If the switches still do not enumerate correctly, check that all switches have
the correct BANK address assigned to them and that all daisy-chain cables
are connected properly.
12. Verify that the Master unit has detected all Slave switches by scrolling
through the BANKS using the BANK up and BANK down buttons.
If all Slave switches are detected properly, the LED display on the Master
switch will register and display the attached Slave switch’s BANK address.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR PRO2
Powering up the Systems
Once all cables have been connected, power up the computers that are
attached to the PRO2. All computers can be powered on simultaneously. The
PRO2 emulates both a mouse and keyboard on each port and allows your
computer to boot normally.
The computer connected to port “1” will be displayed on the monitor. Check
to see that the keyboard, monitor, and mouse are working normally. Proceed
to do this with all occupied ports to verify that all computers are connected
and responding correctly. If you encounter an error, check your cable
connections for that computer and reboot. If the problem persists, please
refer to the Troubleshooting section in this manual.
Using Your PRO2:
Now that you have connected your Console and computers to your PRO2,
it is ready for use.
Select connected computers by either the direct-access port selectors, located on
the front panel of the PRO2, using the On-Screen Display, or by using hot key
commands through the Console keyboard. It takes approximately 1-2 seconds for
the video signal to refresh after switching computers. Re-synchronization of the
mouse and keyboard signals also occurs. This is normal operation and ensures
that proper synchronization is established between the Console and the con-
nected computers.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR PRO2
Selecting a Computer Using Keyboard Hot Key Commands:
Switch to the next or previous port with simple keyboard key sequences
using the “Scroll Lock” key and either the up or down arrow keys. To send
commands to the PRO2, the “Scroll Lock” key must be pressed twice within
two seconds. The PRO2 will beep, confirming that it is in hot key mode.
Next, press the up or down arrow keys, and the PRO2 will switch to either
the prior port or the next port.
+
+
+
+
Switch to next active port—Down arrow
Switch to previous active port—Up arrow
With a single-switch configuration (no daisy-chained switches), you can
switch directly to any port by entering the two-digit number of the port you
wish to access. For example, if you press “Scroll Lock”, “Scroll Lock”, “02”,
the PRO2 will switch to the computer on port 2 located on BANK 00.
+
+
Switch to BANK 00, Port 2—(02)
Note: You will have approximately five seconds to complete each
hot key sequence.
With daisy-chain switch configuration, you can switch between BANKs by
pressing “Scroll Lock”, “Scroll Lock”, “Page Up”, to switch to the previous BANK.
Press “Scroll Lock”, “Scroll Lock”, “Page Down”, to switch to the next BANK.
Page
Up
Page
Down
+
+
+
+
Switch to previous BANK—Page Up
Switch to next BANK— Page Down
17
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR KVM SWITCH
With a daisy-chain switch configuration, you can switch directly to any port
on any BANK by pressing “Scroll Lock”, “Scroll Lock”, BANK address, and
port number. For example, if you press “Scroll Lock”, “Scroll Lock”, “03”,
“05”, the computer on BANK 03, Port 5 will become active.
+
+
+
AutoScan Mode:
Pressing the AutoScan button on the PRO2 will activate the AutoScan
function. In AutoScan mode, the PRO2 remains on one port for a pre-set
number of seconds, before switching to the next computer. This time
interval can be adjusted via the On-Screen Display menu.
Note: There is no mouse or keyboard control in AutoScan mode. This is
necessary to prevent data and synchronization errors. If the user is using the
mouse or keyboard when the PRO2 is switching between ports, data flow
may become interrupted and could result in erratic mouse movement and/or
wrong-character input when using the keyboard.
Press any button on the front panel or any key on the keyboard to
disable AutoScan.
Selecting a Computer Using Direct-Access Port Selectors:
You can directly select which computer you wish to control by pressing the
direct-access port selector next to the corresponding port. The LED will illuminate
to indicate the port is currently selected. If you are installing multiple PRO2s that
are daisy-chained, use the BANK scroll keys located on the front panel of the
Master switch to access other computers that are connected to the Slave switches.
BANK Up and BANK Down Scroll Buttons:
Pressing the BANK + and BANK – scroll buttons on the Master switch will
allow you to switch between the daisy-chained PRO2s. Pressing both
buttons simultaneously will reset the PRO2.
The BANK + button will take you to the next BANK. For example, when you
are at the Master switch (BANK 00) and want to check computers on BANK
02, pressing the BANK + button will take you to BANK 02. As a default, the
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR PRO2
first active computer will be displayed on the Console monitor. Use the
direct-access port selectors to go to the desired computer on BANK 02.
The “BANK –” button will take you to the previous BANK. For example,
when you are at BANK 02 and want to check computers in BANK 01.
Pressing the “BANK –” button will take you to BANK 01. As default, the
first active computer will be displayed on the Console monitor. Use the
direct-access port selectors to go to the desired computer on BANK 01.
Keyboard Hot Key Commands:
Conveniently command the PRO2 to switch ports through simple keyboard
key sequences. To send commands to the PRO2, the “Scroll Lock” key must
be pressed twice within two seconds. You will hear a beep for confirmation.
Below is a complete list of hot key commands:
Note: you will have approximately five seconds to complete each
hot key sequence.
SL
SL
SL
SL
SL
SL
Up Arrow
Switch to PREVIOUS ACTIVE port
Down Arrow Switch to NEXT ACTIVE port
Page Up
Page Down
Y
Switch to PREVIOUS BANK
(By default, selects first active port on the
BANK)
Switch to NEXT BANK
(By default, selects first active port on the
BANK)
SL
SL
SL
SL
Directly switches to PORT Y on BANK 00
(Single-Switch Configuration) Y=01 to 16
SL SL Directly switches to PORT Y on BANK X
X
Y
(Daisy-Chain Configuration) (X=00 to 15) (Y=01 to 04 for F1DA104T)
(X=00 to 15) (Y=01 to 08 for F1DA108T)
(X=00 to 15) (Y=01 to 16 for F1DA116T)
SL
SL
SL
SL
SL
SL
SL
SL
Delete
S
Space Bar
A
Reset On-Screen Display menu
Disable sound in AutoScan mode
Activate On-Screen Display
Enable AutoScan mode
(Refer to AutoScan button)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR PRO2
On-Screen Display Menu Control:
To access the On-Screen Display (OSD) menu, press “Scroll Lock”, “Scroll
Lock”, and the space bar. Immediately, the OSD overlay screen will appear.
The superimposed menu screen is generated by the PRO2, and does not affect
your computers or software function in any way.
The main OSD menu is shown below. It displays the current selected BANK. If
you have only one PRO2, it will display “BANK 00”.
Setup Menu
Main Menu
A “✹“ symbol indicates that the computer is powered.
If a computer is connected and is powered up, but the OSD menu does
not display a ✹ symbol, you will have to reset the PRO2 to re-detect the
powered computer. This is done by simultaneously pressing the “BANK +”
and “BANK –” buttons on the front panel.
(ꢀꢁ): SELECT: Navigate to different computers in the same BANK.
(PGUP/DN): BANK: Select previous BANK by pressing the “Page Up” key and
next BANK by pressing the “Page Down” key.
(Insert): RENAME: Name each computer (up to 15 characters).
(ENTER): SAVE: Save the content input.
(TAB): SETUP: Open “Setup” menu.
(ESC): EXIT: Exit the On-Screen Display.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR PRO2
AutoScan Time:
Specifies the amount of time the PRO2 remains on a port before switching
to the next port while in AutoScan mode. You may select different time
intervals—7, 15, 30, or 60 seconds. Use the OSD to set the AutoScan
time interval.
OSD Display Time:
Specifies the amount of time the OSD menu is displayed. Also specifies the
amount of time the “Port Identification” tag displays on-screen after making a
port selection. You may choose 7, 15, 30, or 60 seconds.
For both settings, you may use the arrow keys to navigate. After you have
selected the desired time intervals, push “Enter” key to save the entry.
Press the “ESC” key to go back to the original OSD menu screen.
Press the “ESC” key again to exit the On-Screen Display completely.
Once you have selected a computer on the menu, press “Enter” to switch
to that port.
Note: If there are Slave units connected, and the AutoScan time and OSD
display time settings are set on the Master unit, the settings will also apply to
all slave units.
Updating Firmware:
To update your firmware, download the appropriate firmware file and utility
from belkin.com. The utility automatically guides you through the process of
updating the firmware on your PRO2.
Cautions and Warnings:
We strongly recommend that you update your firmware only if you are
currently experiencing mouse and keyboard problems with your PRO2, as
reconfiguring software may lead to unexpected operational problems.
Please contact Belkin Tech Support if you need assistance.
To update the firmware, you will need the following items:
1. A separate computer running Windows 95, 98, or Me. This computer must
not be connected to the CPU ports on the PRO2.
2. An available parallel port on the computer.
3. A custom flash cable (DB25 Male-to-RJ45; included with purchase) that
connects between the PRO2 and the computer.
4. Firmware update files available at belkin.com.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR PRO2
Connecting Computers:
1. Connect a keyboard, monitor, and mouse to the computer you prepared for
firmware update. It must run Windows 95, 98, or Me.
2. Connect the power adapter to the PRO2. Be sure that all connected com-
puters are powered off at this moment.
3. Connect the custom flash cable (DB25 Male-to-RJ45; included with
purchase). Connect one end of DB25 to your computer’s parallel port
and the other end of RJ45 to the PRO2 flash upgrade jack.
Setting the PRO2 into Flash Mode:
The PRO2 has four Flash DIP switches:
DIP Switch
Firmware
1
2
3
4
ON
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
OFF
ON
OFF
OFF
OFF
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
Main
OSD
Keyboard 1
Mouse 1
Keyboard 2
Mouse 2
(F1DA116T Only)
(F1DA116T Only)
The DIP switch should be set to the specified settings when you are
attempting to update a particular firmware. For example, set DIP switch 1 to
“ON” to flash update the main firmware of the switch.
Note: F1DA116T requires that you flash update two firmwares for the mouse
and keyboard, separately.
1. Once the above steps have been completed, run the Flash software exe-
cutable. Make sure that the appropriate Flash DIP switch is set to the “on”
position. Only one firmware can be flashed at one time.
2. After the Flash update has been completed unplug the power supply from
the PRO2.
3. Set all DIP switches to the Off position.
4. You are now ready to use your PRO2 or continue flashing a different
component if necessary.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
BELKIN KVM SWITCHES AND ACCESSORIES
OmniView KVM Switches
OmniView E Series. This series of desktop OmniView KVM Switches allows
you to control two or four PS/2 computers from one Console and makes
switching between computers more convenient. Designed for compatibility
with your PS/2 platform, it reduces desktop clutter and provides a simple, reli-
able solution at a lower price point.
The E Series KVM Switch supports high-quality resolution of up to
2048x1536@85Hz through a 400MHz bandwidth when used with coaxial
VGA cabling. This means that Belkin OmniView products offer the highest
resolution without compromising the quality of the display. Power for the
KVM Switch draws off the keyboard, so that the Switch requires no additional
power supply and fewer cables. Standard E Series features include: hot key
functionality; keyboard and PS/2 emulations for error-free boot up; and a
Belkin Two-Year Warranty.
F1DB102P E Series 2-Port KVM Switch PS/2 Only
F1DB104P E Series 4-Port KVM Switch PS/2 Only
OmniView SOHO Series with Audio. This innovative design provides
built-in cable management and saves space, while adding a whole new
sculpted look to your desktop. The SOHO Series Switches allow you to
control two or four PS/2 computers from one Console. You'll enjoy the
greatest interface flexibility with PS/2 and USB combination Switches. They
offer you expanded compatibility with either interface, or both, along with
the additional convenience of manual push-button port selection on the face
of the device. Switch between speakers and microphones without having
to unplug and re-plug them when switching computers. The flash feature
allows users to download firmware updates and ensure compatibility with
the latest computers and devices. The enclosure design builds in cable
management and the Switches are self-powered, so they require no external
power supply and work with fewer cables. High-quality resolution of up to
2048x1536@85Hz is supported through a 400MHz bandwidth by the
OmniView SOHO Series with Audio KVM Switch when used with coaxial
VGA cabling, offering the highest resolution without compromising the quality
of the display. Other standard features found on this unit include: hot key
functionality; keyboard and PS/2 emulations for error-free boot up; and a
Belkin Five-Year Warranty.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
BELKIN KVM SWITCHES AND ACCESSORIES
F1DS102P SOHO Series 2-Port KVM Switch with Audio PS/2 Only
F1DS104P SOHO Series 4-Port KVM Switch with Audio PS/2 Only
F1DS102T SOHO Series 2-Port KVM Switch with Audio PS/2 & USB
F1DS104T SOHO Series 4-Port KVM Switch with Audio PS/2 & USB
OmniView PRO2 Series. The OmniView PRO2 Series KVM Switches deliver
reliability, performance, and centralized control necessary for today’s
enterprise environment. This series of KVM Switches enables you to control
multiple platform servers from a single Console. Available in the desktop-style,
4-port, and the 19-inch rack-mountable 8- and 16-port models, the OmniView
PRO2 Series KVM Switch expands easily for full control of as many as 256
CPUs through dedicated daisy-chain ports. Video resolutions of up to
1600x1200@65Hz are supported through a 400MHz bandwidth. On-Screen
Display allows you to name and select attached servers using an on-screen
interface. Switch between ports by using hot key commands or direct-access
port selectors. The Omniview PRO2 Series KVM Switches use standard cables
for easy installation; include a 12-Volt DC, 1-Amp power supply; and are
backed by a Belkin Five-Year Warranty.
F1DA104T PRO2 Series 4-Port KVM Switch PS/2 & USB
F1DA108T PRO2 Series 8-Port KVM Switch PS/2 & USB
F1DA116T PRO2 Series 16-Port KVM Switch PS/2 & USB
OmniView MATRIX2 Series. The OmniView MATRIX2 Series 2x8- and
2x16-Port KVM Switches enable two administrators to control up eight or
16 PS/2 and USB platform servers, separately or simultaneously. Each user
operates a separate console following a different bus path for complete
independence from the other console. The OmniView MATRIX2 Series KVM
Switch expands easily for full control of as many as 256 computers through
dedicated daisy-chain ports and is natively rack-mountable for server room
environments. Video resolutions of up to 2048x1536@85Hz are supported
through a 400MHz bandwidth. On-Screen Display allows you to name and
select attached servers using an on-screen interface. Switch between ports by
using hot key commands or direct-access port selectors. The OmniView
MATRIX2 Series KVM Switches use standard cables for easy installation;
include a 12-Volt DC, 1-Amp power supply; and are backed by a Belkin
Five-Year Warranty.
F1DM208T MATRIX2 Series 2x8-Port KVM Switch PS/2 & USB
F1DM216T MATRIX2 Series 2x16-Port KVM Switch PS/2 & USB
24
Download from Www.Somanuals.com. All Manuals Search And Download.
BELKIN KVM SWITCHES AND ACCESSORIES
OmniView All-In-One KVM Cables
OmniView All-In-One KVM Cables provide you with the quality connections
necessary to set up your KVM solution. Each kit provides the proper cables
and connectors to complete the installation of a Belkin OmniView KVM Switch.
OmniView All-In-One KVM Cables feature sturdy construction, with
strain-relief construction and PVC overmolding to prevent data loss. Use
of 20-gauge wire delivers the high-performance cable that users have come
to identify with the Belkin name. A ferrite bead reduces electromagnetic
and radio frequency interference (EMI/RFI). PC99 color-coded connectors
and modified thumbscrews have been added for easier installation.
Gold Series. These cables are known for their 24k gold-plated connectors
and black Flextec™ jackets, and offer the highest-performance possible. The
24k gold-plated connectors maximize longevity and signal integrity, and offer
corrosion resistance. The Gold Series includes a custom 15-pin, coaxial VGA
cable to support image clarity for the highest-resolution applications. The
Gold Series is available in PS/2 and USB styles.
F3X1835-XX-GLD PS/2 (available in lengths of 6, 10, 15, and 25 feet)
F3X1895-XX-GLD USB (available in lengths of 6, 10, and 15 feet)
PRO Series Plus. The PRO Series Plus Cables are high-performance
cables built to exacting standards. They receive and transmit data through
nickel-plated connectors. The industry-standard 14-pin, coaxial VGA cabling
was designed to support image clarity for high-resolution applications. The
gray jacket bends into even the tightest crawl spaces for an excellent fit.
The PRO2 Series Plus Cable is available in PS/2- and USB-style cable kits.
F3X1105-XX
F3X1962-XX
PS/2 (available in lengths of 6, 10, 15, and 25 feet)
USB (available in lengths of 6, 10, and 15 feet)
(-XX denotes length in feet)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
BELKIN KVM SWITCHES AND ACCESSORIES
OmniView Accessories and Adapters
Belkin KVM technology includes various accessories and adapters to complete
your KVM solution. The Adapter Series converts Mac, Sun, or USB keyboards,
video, and mouse signals into PS/2 and VGA.
®
F1D080—The OmniView PS/2 Mac Adapter™ converts a Macintosh
™
®
computer with a 4-pin ADB (Apple Desktop Bus) and DB15
connector into a PS/2 keyboard, HDDB15 VGA monitor, and
PS/2 mouse.
F1D082—The OmniView PS/2 Sun Adapter™ converts a Sun 8-pin
keyboard/mouse and 13W3 video into a PS/2 keyboard, PS/2
mouse, and HDDB15 VGA monitor.
F1D084—The OmniView CAT5 Extender enables you to control a PC or
KVM Switch up to 500 feet away using standard UTP CAT5 cabling.
F1D087—The OmniView Keyboard Extender allows you to extend your
keyboard up to 250 feet away.
F1D088—The OmniView VGA Monitor Extender bridges up to 250 feet
of distance between your PC and monitor.
F1D089—The OmniView Keyboard Splitter allows you to work with two
kinds of PS/2 keyboards and pointing devices without swapping
cables or rebooting the computer.
F1D090—The OmniView Mouse Splitter allows you to work with two
kinds of PS/2 mice or trackballs without swapping cables or
rebooting the computer.
F1D201—The OmniView 2-Port Reverse KVM Switch gives two users
central control of one PC from two sets of keyboards, monitors,
and mice.
F2N017—The Omniview PRO2 Series AT-to-PS/2 Keyboard Adapter
allows you to connect a keyboard with an AT-style connector to a
computer with a PS/2-style connector.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO2 SERIES FAQs
Q: What operating systems does the PRO2 support?
A: The PRO2 will support any operating system that runs on a PS/2 and
USB platform. It will also work with non-USB Sun and Mac operating
systems using the appropriate adapters (OmniView PS/2 Sun Adapter
[F1D082], OmniView PS/2 Mac Adapter [F1D080]). Operating systems
include, but are not limited to, DOS, Windows 95/98/2000/Me/NT/XP,
Linux, and Mac OS.
Q: What does flash upgradeable mean?
A: With flash upgrade capability, you can update your PRO2 firmware at
any time through a simple parallel connection. Internet upgrade capability
ensures that your PRO2 is always the most current version on the market
with the latest features and enhancements. See the section on firmware
updates in this manual (page 21) and when to use them.
®
Q: Does the PRO2 support Microsoft IntelliMouse ?
®
®
A: The PRO2 supports mice from Microsoft, Logitech , Kensington , etc., and
Belkin. Please contact Belkin Technical Support for compatibility issues
you may experience.
Q: How does the PRO2 allow the user to switch between ports?
A: The PRO2 supports three methods of port selection. The user can
select computers using specially designated keyboard hot keys, through
On-Screen Display, or can independently access the desired port by
pushing the direct-access port selectors.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO2 SERIES FAQs
Q: How far can the computer be from the PRO2?
A: When using PS/2 connections, the PRO2 can be up to 25 feet away from
your computer. If your computer needs to be more than 25 feet (7.5
meters) from the PRO2, you can use the Belkin CAT5 Extender to extend
your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet away using a
standard CAT5 UTP cable. When using USB connection between your
PRO2 and computer, we recommend that your computer be no more than
15 feet (5 meters) from the PRO2.
Q: What is the maximum video resolution that the PRO2 supports?
A: The advanced video circuit in the PRO2 supports a maximum resolution of
2048x1536@85Hz.
Q: What video bandwidth does the PRO2 support?
A: The PRO2 supports 400MHz of video bandwidth.
Q: Can PS/2 and USB connections be used simultaneously on the same port?
A: No. You must use one or the other for each CPU’s dedicated port on
the PRO2.
Q: Do I have to install any software to use the PRO2?
A: No, the PRO2 does not require any drivers or software to be installed in
your computers. Simply connect all your computers to the PC ports on the
PRO2, then attach one keyboard, monitor, and mouse to the Console port
and it is ready for use.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO2 SERIES FAQs
Q: Does the PRO2 require an AC adapter?
A: Yes, the PRO2 requires a 12-Volt DC, 1-Amp power adapter in order to
function properly.
Q: Can I use the PRO2 to switch video signals only?
A: Yes, you may use the PRO2 to switch between video signals only without
having to connect the keyboard and mouse. The
keyboard and mouse should be connected directly to the computer that
the video signal is taken from to ensure that your computer functions
properly.
Q: Can I use the PRO2 on my Sun computer that supports USB?
A: Yes, the PRO2 works with any USB-capable computer.
Q: Does the PRO2 support Linux?
A: Yes, the PRO2 works with all Linux kernels configured for USB support.
Q: How long is the warranty for the PRO2?
A: The PRO2 comes with a five-year limited warranty.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
General
My computer does not boot when connected to the PRO2 but works fine
when I connect the keyboard, video, and mouse directly to the computer.
• Make sure that the keyboard and mouse cables are connected tightly
between the PRO2 and the computer.
• Check that the keyboard and mouse cables are not crossed.
Video
I am getting ghosting, shadowing, or fuzzy images on my monitor.
• Check that all video cables are inserted properly.
• Check that the monitor you are using supports the resolution and
refresh-rate setting on your computer.
• Check that the graphics card you are using supports the resolution and
refresh-rate setting on your computer.
• Connect the monitor directly into the computer you are having trouble
with to see if the problem still appears.
I am getting a black screen on my monitor.
• Check that all video cables are inserted properly.
• If you are not using a power adapter, check that the keyboard cable is
connected and inserted properly between the computer and PRO2 for the
appropriate port.
• If you are using the PRO2 only for video switching and have no keyboard
and mouse connection between the PRO2 and PC, you will need to
purchase the optional 9V DC, 600mA power adapter (F1D065-PWR for
your appropriate country).
• Connect your monitor directly to the computer to verify that your
monitor is functioning properly.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Keyboard
The computer does not detect a keyboard and I get a keyboard error
reported at boot up.
• Check that the keyboard cable between the PRO2 and the computer is
completely connected. Tighten any loose connections.
• Try using a different keyboard.
• Try connecting the computer to a different port.
• If you are using the keyboard software that was included with your keyboard,
uninstall it and then reinstall the standard Microsoft keyboard driver.
Mouse
The mouse is lost when I switch to a different port.
• Check that the mouse you are using is connected properly to the Console of
the PRO2.
• If you are using a mouse driver that was included with your mouse,
uninstall it and install the standard Microsoft mouse driver.
• Disconnect and reconnect the mouse cable attached to the channel
with which you are experiencing problems to re-synchronize the mouse
connection.
• Make sure the mouse works when directly plugged into the computer.
• If the computer is coming out of standby mode, allow up to one minute to
regain mouse function.
• De-activate power-management schemes on the PC with which you are
experiencing problems.
• Try a different mouse.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
The mouse is not detected at boot-up.
• Check the cables and make sure that they are inserted correctly.
The computer boots up, but the mouse does not work.
• Make sure the mouse is plugged in properly.
• Make sure the mouse works when directly plugged into the computer.
Rebooting may be necessary when trying this.
• Try a different mouse.
When I switch from one port to another, mouse movement is
completely erratic.
• Make sure you do not have more than one mouse driver installed. Make
sure that the driver is either for a standard PS/2 mouse or a Microsoft
computer-compatible PS/2 mouse.
• Make sure you do not have any mouse drivers loaded in your CONFIG.SYS
or AUTOEXEC.BAT files.
• Avoid moving the mouse or pressing the mouse button when switching
ports on the PRO2.
• You can reset the mouse and resume proper mouse movement simply by
unplugging the mouse from the front of the PRO2 for about 2-3 seconds,
and then plugging it in again.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
USB
I am connecting my computer to the USB PRO2 via USB and my keyboard
and mouse do not work.
• Prior to connecting the USB PRO2, make sure that the HID USB driver is
installed on each computer. (To install the HID USB driver, connect a USB
mouse and USB keyboard to the computer. A Windows operating system
should automatically install the drivers.)
Some of the keys on my keyboard are not functioning properly when I use
a Mac computer.
• Because you are using a PC keyboard on a Mac system, a few of the option
keys on your PC keyboard may be reversed. All major keys will function
as labeled.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY, FCC, CE, ICES STATEMENT
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our
sole responsibility that the products:
F1DA104T, F1DA108T, F1DA116T
to which this declaration relates:
Comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin Components, declare under our sole responsibility that the F1DA104T, F1DA108T,
and F1DA116T to which this declaration relates, are in conformity with Emissions Standard
EN55022 and with Immunity Standard EN55024, LVP EN61000-3-2, and EN61000-3-3.
ICES
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la
classe B est conforme á la norme NMB-003 du Canada.
Belkin Components Limited Five-Year Product Warranty
Belkin Components warrants this product against defects in materials and workmanship for its
warranty period. If a defect is discovered, Belkin will, at its option, repair or replace the product
at no charge provided it is returned during the warranty period, with transportation charges
prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of
purchase may be required. This warranty does not apply if the product has been damaged by
accident, abuse, misuse, or misapplication; if the product has been modified without the written
permission of Belkin; or if any Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL
OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY
DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or
addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO
OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED
WITH BELKIN PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or consequential damages or
exclusions of implied warranties, so the above limitations of exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from 34
state to state.
Download from Www.Somanuals.com. All Manuals Search And Download.
belkin.com
Belkin Components
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Unit 13 • Gatelodge Close • Round Spinney
Northampton • Northants • NN3 8RX • United Kingdom
Tel: +44 (0) 1604678300
Fax: +44 (0) 1604678330
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin Components, Ltd.
7 Bowen Cresent • West Gosford
NSW 2250 • Australia
Tel: +61 (2) 4372 8600
Fax: +61 (2) 4325 4277
P73782-A
© 2002 Belkin Components. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed.
Apple, Mac, and Macintosh are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
|