USER MANUAL
AXIS M3011 Network Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Table of contents
Contents
AXIS M3011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Key features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Accessing the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Access from a browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting the root password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Access from the internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the root password over a secure connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Lens adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
The Live View page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Video Streams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
How to stream MPEG-4/H.264 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Motion JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Alternative methods of accessing the video stream . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Video Stream . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Stream Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Overlay Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Privacy mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Live View Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Event Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Event Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Camera Tampering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Motion Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Resetting to Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Checking the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Upgrading the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
General performance considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
3
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011
AXIS M3011
Key features
•
•
•
•
Superior image quality
AXIS M3011 offers superior image quality with progressive scan, providing crisp and clear images of both illuminated
and dark areas.
Multiple H.264, Motion JPEG and MPEG-4 Part 2 streams
Multiple H.264 and Motion JPEG streams can be provided either in full frame rate or individually optimized for differ-
ent quality needs and bandwidth constraints. AXIS M3011 also supports MPEG-4 Part 2 for backward compatibility.
Power over Ethernet
AXIS M3011supports Power over Ethernet (IEEE 802.3af) reducing installation costs by eliminating the need for power
cables.
Intelligent video capabilities
The AXIS M3011 Network Camera offers intelligent capabilities such as enhanced video motion detection, and detec-
tion of camera tampering attempts like blocking or spray-painting. The camera also provides capacity for third party
analytics modules.
•
Improved security
AXIS M3011 logs all user access, and lists currently connected users. This network camera also includes hardware
accelerated crypto, which means that full frame rate video can be provided over HTTPS.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011
Overview
camera module
holder arrow
camera arrow
ceiling
springs
metal camera
module holder
network connector
LED indicators
in camera
*
control button
magnetic dome cover
plugs (2x)
(may be replaced by tamper-proof screws (2x))
*
RJ-45 Ethernet connector. Supports Power over Ethernet. Using shielded cables is recommended.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011
LED indicators
LED
Color
Indication
Network Green
Amber
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to 10 Mbit/s network. Flashes for network activity.
No network connection.
Unlit
Status
Power
Green
Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to Setup > System
Options > LED settings. See the online help files for more information.
Amber
Red
Steady during startup, during reset to factory default or when restoring settings.
Slow flash for failed upgrade.
Green
Amber
Normal operation.
Flashes green/amber during firmware upgrade.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Accessing the Camera
Accessing the Camera
To install the AXIS M3011 network camera, refer to the installation guide supplied with your product.
The network camera can be used with most standard operating systems and browsers. The recommended browser is Microsoft
Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating systems. See Technical Specifications,
Notes:
•
To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls and install AXIS
Media Control (AMC) on your workstation.
TM
•
•
QuickTime is also supported for viewing H.264 and MPEG-4 streams.
If your computer restricts the use of additional software components, the camera can be configured to use a Java
applet for viewing Motion JPEG.
•
H.264, MPEG-4 are licensed technologies. The network camera includes one viewing client license for each. Installing
additional unlicensed copies of the viewing client is prohibited. To purchase additional licenses, contact your Axis
reseller.
Access from a browser
1. Start a browser (Internet Explorer, Firefox).
2. Enter the IP address or host name of the camera in the Location/Address field of your browser.
To access the camera from a Macintosh computer (Mac OSX), click on the Bonjour tab and select the AXIS M3011
from the drop-down list.
3. If this is the first time you are accessing the camera, see Setting the root password, on page 8. Otherwise enter your
user name and password, set by the administrator.
4. The camera’s Live View page appears in your browser.
Note:
The layout of the Live View page may have been customized to specific requirements. Consequently, some of the
examples and functions featured here may differ from those displayed on your own Live View page.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Accessing the Camera
Setting the root password
1. When accessing the camera for the first time, the ‘Configure Root Password’ dialog appears.
2. Enter a password and re-enter to confirm. Click OK. The
Enter Network Password dialog appears.
3. Enter the User name: root
4. Enter the password set in step 2, and click OK. If the
password is lost, the camera must be reset to the factory
default settings. See page 33.
Notes:
•
•
The default administrator user name ‘root’ is permanent
and cannot be deleted.
While setting the root password, click Yes to install the
AXIS Media Control (AMC), if you are prompted to. You
will need administrator rights on the computer to do
this.
Access from the internet
Once connected, the camera is accessible on your local area network (LAN). To access the camera from the Internet you must
configure your broadband router to allow incoming data traffic to the camera. To do this, enable the NAT-traversal feature,
which will attempt to automatically configure the router to allow access to the camera. This is enabled from Setup > System
Options > Network > TCP/IP Advanced.
For more information, please see NAT traversal (port mapping) for IPv4, on page 28. See also the AXIS Internet Dynamic DNS
8
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Accessing the Camera
Setting the root password over a secure connection
To gain access to the product, you must set the password for the default administrator user - ‘root’. This is done in the
‘Configure Root Password’ dialog, which appears when the network camera is accessed for the first time.
To prevent network eavesdropping the root password can be set via an encrypted HTTPS connection, which requires an HTTPS
certificate (see notes below).
To set the password via a standard HTTP connection, enter it directly in the first dialog shown below.
To set the password via an encrypted HTTPS connection, follow these steps:
1. Click the Create self-signed certificate button.
2. Provide the requested information and click OK. The certificate is created and the password can now be set securely.
All traffic to and from the network camera is encrypted from this point on.
3. Enter a password and then re-enter it to confirm the spelling. Click OK. The password has now been configured.
To create an HTTPS connection,
click this button.
To configure the password directly
via an unencrypted connection, enter
the password here.
Notes:
•
HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between web browsers and
servers. The HTTPS certificate controls the encrypted exchange of information.
The default administrator user root cannot be deleted.
•
•
If the password for root is lost or forgotten, the network camera must be reset to the factory default settings. See
9
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Lens adjustments
Lens adjustments
To adjust the position of the lens, follow these steps:
Open the Live View page in your web browser.
While checking the image in the Live View page, move the lens to the desired position.
Focus
The focus of the AXIS M3011 Network Camera is set at the factory from 0.5m to infinity.
It does not normally need adjustment. To focus on objects closer than 0.5m, or if for
some reason the lens has lost focus, this can be adjusted in the following way:
1. Loosen the lens lock screw.
2. Manually rotate the lens to adjust the focus until the image on the Live View
page is satisfactory.
3. Gently retighten the lens lock screw.
Lens lock screw
10
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Lens adjustments
The Live View page
How you customize the Live View page determines which buttons are visible. Not all the buttons described below will show up
unless configured to do so.
General controls
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream pro-
file on the Live View page. Stream profiles are configured under Video > Stream Profiles.
The Manual trigger buttons can trigger an event directly from the Live View page. This button is con-
figured under Events.
The Snapshot button saves a snapshot of the video image on display. Right-click on the video image
to save it in JPEG format on your computer. This button is primarily intended for use when the AMC
viewer toolbar is not available.
AXIS Media Control toolbar
The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet Explorer only. See AXIS Media Control (AMC),
on page 13 for more information. AMC displays the following buttons:
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the image is saved can be
Click the View Full Screen button and the video image will fill the entire screen. Press Esc (Escape) on the
computer keyboard to cancel full screen view.
The Record button is used to record the current video stream. The location where the recording is saved can
11
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Video Streams
Video Streams
The network camera provides several image and video stream formats. Your requirements and the properties of your network
will determine the type you use.
The Live View page in the network camera provides access to H.264, Motion JPEG, and MPEG-4 video streams, and to the list
of available stream profiles. Other applications and clients can also access these video streams/images directly, without going
via the Live View page.
How to stream MPEG-4/H.264
This video compression standard makes good use of bandwidth, and can provide high quality video streams at less than 1
Mbit/s.
Deciding the combination of protocols and methods to use depends on your viewing requirements, and on the properties of
your network. The available options in AMC are:
Unicast RTP
This unicast method (RTP over UDP) should
be your first consideration for live unicast
video, especially when it is important to
always have an up-to-date video stream,
even if some images are dropped.
Unicasting is used for video streaming, so that there is
no video traffic on the network until a client connects
and requests the stream.
RTP over RTSP
This unicast method (RTP tunneled over
RTSP) is useful as it is relatively simple to
configure firewalls to allow RTSP traffic.
Note that there are a maximum of 20 simultaneous
unicast connections.
RTP over RTSP over
HTTP
This unicast method can be used to traverse
firewalls. Firewalls are commonly configured
to allow the HTTP protocol, thus allowing
RTP to be tunneled.
Multicast RTP
This method (RTP over UDP) should be used for live multicast video. The video stream is always
up-to-date, even if some images are dropped.
Multicasting provides the most efficient usage of bandwidth when there are large numbers of cli-
ents viewing simultaneously. A multicast broadcast cannot however, pass a network router unless
the router is configured to allow this. It is not possible to multicast over the Internet, for example.
Note also that all multicast viewers count as one unicast viewer in the maximum total of 20
simultaneous connections.
AMC negotiates with the camera to determine the transport protocol to use in the order listed above. This order can be
changed and the options disabled, to suit specific requirements.
Important!
H.264 and MPEG-4 are licensed technologies. The network camera includes one viewing client license for each tech-
nology. Installing additional unlicensed copies of the viewing client is prohibited. To purchase additional licenses, con-
tact your Axis reseller.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Video Streams
AXIS Media Control (AMC)
AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows is
the recommended method of accessing live video from the network
camera.
The AMC control panel can be used to configure various video and audio
settings. Please see the AMC user manual included in the tool for more
information.
The AMC control panel is automatically installed on first use, after which
it can be configured.
Open the AMC Control Panel from:
•
•
Windows Control Panel (from the Start menu)
Alternatively, right-click the video image in Internet Explorer and
click Settings to access the AMC window.
Note:
AXIS M3011 does not support audio.
Motion JPEG
This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate
sufficient to create a stream that shows constantly updated motion.
The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every
image contained in the stream. The recommended method of accessing Motion JPEG live video from the network camera is to
use the AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows.
Alternative methods of accessing the video stream
You can also access video/images from the network camera in the following ways:
•
Motion JPEG server push (if supported by the client, Firefox, for example). This option maintains an open HTTP con-
nection to the browser and sends data as and when required, for as long as required.
•
•
Windows Media Player. This requires AMC and the MPEG-4/H.264 viewing client to be installed. The paths that can be
used are listed below in the order of preference:
•
•
•
•
Unicast via RTP: axrtpu://<ip>/axis-media/media.amp?videocodec=<codec>
Unicast via RTSP: axrtsp://<ip>/axis-media/media.amp?videocodec=<codec>
Unicast via RTSP, tunneled via HTTP: axrtsphttp://<ip>/axis-media/media.amp?videocodec=<codec>
Multicast: axrtpm://<ip>/axis-media/media.amp?videocodec=<codec>
•
To access the video stream from QuickTime™ the following paths can be used:
•
•
rtsp://<ip>/axis-media/media.amp?videocodec=<codec>
rtsp://<ip>/axis-media/media.3gp?videocodec=<codec>
Notes:
•
•
•
The network camera supports QuickTime 6.5.1 and later.
QuickTime adds latency to the video stream (up to 3 seconds).
It may be possible to use other players to view the MPEG-4/H.264 stream using the paths above, although Axis does
not guarantee this.
•
•
<ip> = IP address
<codec> = h264 or mpeg4. The default codec is H.264.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Video
Video
This section describes how to configure the camera, and is intended for product Administrators, who have unrestricted access
to all settings; and Operators, who have access to the settings for Basic Setup, Video and Events.
You can configure the camera by clicking Setup in the top right-hand corner of the Live View page. Click
on this page to
access the online help that explains the setup tools.
Video Stream
The video stream settings appear under four
different tabs:
•
•
•
Image
MPEG-4 & H.264
MJPEG
Image
Image Appearance
Use these settings to modify the image resolution
and compression. Setting the compression level
affects the image quality and the amount of
bandwidth required; the lower the compression, the
higher the image quality with higher bandwidth
requirements.
See the online help files
for more information.
Video Stream
To avoid bandwidth problems on the network, the frame rate allowed to each viewer can be limited. Select the Unlimited
radio button option to allow the highest available frame rate; or select the Limited to radio button option and enter a value
(1-30) fps in the field.
Text Overlay Settings
Use these settings to include text, date, and time as
Text,
overlay. Click
for information on available options.
date & time
overlay
Preview
For a preview of the image before saving, select the Video
Format and click Open.... When satisfied with the settings,
click Save.
MPEG-4 & H.264
GOV Settings
The GOV structure describes the composition of the H.264
video stream which consists of 2 image forms, I-images
and P-images. An I-image is a complete image, whereas a
P-image is only the differences in the image as compared
with the previous image.
The GOV length determines how many P-images are sent before the next complete I-image is sent.
Setting the GOV-length to a higher value saves considerably on bandwidth but if there is congestion on the network, there
may be noticeable decay in the video quality. Setting the GOV-length to a lower value increases the video quality, in this case.
GOV length should not be higher than the set frame rate when using a pre-trigger buffer see Pre- and post-trigger buffers, on
page 24.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Video
Bit Rate Control
The bit rate can be set as Variable Bit Rate (VBR) or Constant Bit Rate (CBR).
VBR adjusts the bit rate according to the image complexity, using up bandwidth for increased activity in the image, and less
for lower activity in the monitored area.
CBR allows you to set a fixed Target bit rate that consumes a predictable amount of bandwidth. As the bit rate would usually
need to increase for increased image activity, but in this case cannot, the frame rate and image quality are affected
negatively. To partly compensate for this, it is possible to prioritize either the frame rate or the image quality whenever the bit
rate needs to be increased. Not setting a priority means the frame rate and image quality are equally affected.
Note:
To determine a reasonable bit rate, go to Setup > Video > Video Stream > Image, check the Include checkbox and
enter the code #b in the Include text: field. The current bit rate will display as a text overlay on the Live View page.
To view the image stream while configuring the GOV settings and Bit rate control, select Open... under Preview.
MJPEG
Sometimes the image size is large due to low light or complex scenery. Adjusting the maximum frame size helps to control the
bandwidth and storage used by the Motion JPEG video stream in these situations. Defining the frame size as Unlimited
provides consistently good image quality at the expense of increased bandwidth and storage usage during low light. Limiting
the frame size optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and
storage usage, the maximum frame size should be set to an optimal value.
Stream Profiles
There are four pre-programmed stream profiles available for quick set-up. These settings can be adjusted and new customized
profiles can be created. Each profile has a descriptive name, describing its usage and/or purpose. The profiles can be accessed
from the Live View page.
•
•
•
To add a new stream profile, click Add to bring up the Stream Profile Settings dialog.
Choose a descriptive name and enter a description for your profile.
Choose the form of Video encoding you wish to use from the drop-down list:
•
H.264 - Also known as MPEG-4 Part 10. This is the new generation compression standard for digital video. This
function offers higher video resolution than Motion JPEG or MPEG-4 at the same bit rate and bandwidth, or the
same quality video at a lower bit rate.
•
•
MPEG-4 part 2 -A video compression standard for digital video.
Motion JPEG - Delivers a high quality video stream, from which individual images can be extracted and saved.
•
•
Copy an existing stream profile to your system and rename the copy
Modify an existing stream profile based on the light situation and motion to be captured by your camera. See Stream
Profile Settings for more information.
•
Highlight the stream profile you wish to remove, then click Remove to remove it from the list.
Camera Settings
This page provides access to the advanced image settings for the AXIS M3011.
Image Appearance
Color level - Select an appropriate level by entering a value in the range 0-100. Lower values mean less color saturation,
whilst the value 100 gives maximum color saturation.
Brightness - Image brightness can be adjusted in the range 0-100, where a higher value produces a brighter image.
Sharpness - Controls the amount of sharpening applied to the image. A sharper image might increase image noise especially
in low light conditions. A lower setting reduces image noise, but the image would be less sharp.
Contrast - Adjust the contrast of the image by raising or lowering the value in this field.
Rotate image - The image can be rotated to the correct orientation. Select the appropriate value from the drop-down list.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Video
White balance
This is used to compensate for the different colors present in different light sources, to make the colors in the image appear
the same. The AXIS M3011 can be set to automatically identify the light source and compensate for its color. Alternatively,
the type of light source can be manually selected from the drop-down list. Please see the online help files
description of each available setting.
for a
Exposure Settings
Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidth
considerations.
Exposure value - Increasing the exposure will improve image quality at the expense of the total frame rate. There may also
be an increase in motion blur.
Exposure control - This setting is used to adapt to the amount/type of light being used. Allow slow shutter can be
enabled/disabled when the exposure control is set to Automatic.
Enable Backlight compensation - Backlight compensation makes the subject appear clearer when the image background is
too bright, or the subject too dark.
Exposure zones - This setting determines which part of the image is used to calculate the exposure.
Exposure priority - This defines the balance between image quality and the frame rate. When Motion is prioritized, motion
blur is minimized, but the image quality may be reduced with a higher frame rate. A prioritized Low noise will provide
better image quality with a lower frame rate.
View Image Settings
Click View to view the video stream with the current configuration. Once satisfied, click Save.
Overlay Image
An overlay image is a static image superimposed over the video image. An overlay can be used to provide extra information, or
to mask a part of the video image.
To use an overlay image in the AXIS M3011 Network Camera, it must be selected from the drop-down list of available images.
The overlay (a logo, for example) is then displayed in the video image.
To use your own image, first upload it to the AXIS M3011 Network Camera. To upload enter the name of the file in the field
provided, or click the Browse button, locate and click the Upload button.
Image Overlay Placement - To place the overlay image at specific coordinates in the live view image, check Include overlay
image at the coordinates and enter the X and Y coordinates.
Click View to view the overlay image in the video stream. Once satisfied, click Save.
Privacy mask
Privacy masks are up to three configurable areas of solid color that allow concealment of parts of the image that are not to be
viewable. Privacy masks cannot even be bypassed via the VAPIX® Application Programming Interface (API).
The Privacy Mask List shows all the masks that are currently configured in AXIS M3011 Network Camera and indicates if they
are enabled. To define a new mask:
1. Click Add. A rectangle appears on the image.
1. Place the rectangle over the desired area to conceal.
2. To resize, click and pull the bottom right-hand corner.
3. Choose a color, black, white, gray or red for the box from the Privacy mask color drop-down list.
4. Enter a descriptive name in the Mask name field.
5. Click Save.
To edit a privacy mask, select it and reshape, move or change color as needed. Refer to the online Help
information.
for more
16
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Live View Config
Live View Config
Layout
Stream Profile
From the Stream Profile drop-down list, select the stream profile to be used for the Live View page. Listed are the standard
stream profiles as well as the ones created under Video > Stream Profiles. See the online help files
on this page for more
information
Default Viewer
From the drop-down lists, select the default method for viewing video images for your browser. The camera attempts to show
the video images in the selected video format and viewer. If this is not possible, the camera overrides the settings and selects
the best available combination.
Browser
Viewer
Description
AMC
Recommended viewer in Windows Internet Explorer (MPEG-4/H.264/Motion JPEG).
H.264 and MPEG-4.
QuickTime
Java applet
A slower imaging alternative to AMC. Requires one of the following installed on the
client:
Windows
Internet Explorer
•
JVM (J2SE) 1.4.2 or higher
•
JRE (J2SE) 5.0 or higher
Still image
Displays still images only. Hit the Refresh button in your browser to view a new
image.
Server Push
QuickTime
Java applet
Still image
Recommended viewer for other browsers (Motion JPEG).
MPEG-4 and H.264.
Other browsers
A slower imaging alternative to Server Push (Motion JPEG only).
Displays still images only. Hit the Refresh button in your browser to view a new
image.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Live View Config
Viewer Settings
Check the Show viewer toolbar box to display the AXIS Media Control (AMC) or the QuickTime viewer toolbar under the video
image in your browser.
The administrator can disable the installation of the MPEG-4 and H.264 decoders included with AMC. This is used to prevent
the installation of unlicensed copies. Further decoder licenses can be purchased from your Axis dealer.
Check the Enable recording button to enable recording from the Live View page.
Action Buttons
The Show manual trigger button can be used to manually trigger and stop an event from the Live View page. See Events, on
Check the Show snapshot button to save a snapshot from the video stream. This button is mainly intended for use with
browsers other than Internet Explorer, or when not using AXIS Media Control (AMC) to view the video stream. AMC for
Internet Explorer provides its own snapshot button.
User Defined Links
User defined links can be CGI links or web links. Once configured,
the link(s) appear on the Live View page.
To set up a web link, select the Use as web link radio button, enter
a descriptive name and enter the URL in the provided field. Click
Save and the link appears in the Live View page.
User defined CGI links can be used to issue VAPIX API requests.
For more information on the VAPIX Application Programming
Interface (API), see the Support/Network Video/Developer pages
Please use the online help files
for more information.
User defined Link
18
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Events
Events
Pre-defined parameters, known as an event or Event Type can trigger certain actions in the camera. A common event type is
an alarm that causes the camera to upload images. Many event types use an Event Server, to receive uploaded images.
An event that is triggered by a signal, such as a door switch, motion detection, or system event, is called a triggered event, see
A scheduled event runs at pre-programmed times.
An Action refers to what happens when the event occurs.
This section describes how to configure the camera to perform certain actions when events occur.
Event Servers
Event Servers are used to receive uploaded image files and/or notification messages. To set up Event Server connections in
your camera, go to Setup > Events > Event Servers and enter the required information for the required server type.
Server type
FTP Server
Purpose
Information required
•
Receives uploaded images
•
•
•
Descriptive name of your choice
Network address (IP address or host name)
User Name and Password
•
•
Receives notification messages
Receives uploaded images
•
•
•
Descriptive name of your choice
URL (IP address or host name)
User Name and Password
HTTP Server
TCP Server
•
Receives notification messages
•
•
•
Descriptive name of your choice
Network address (IP address or host name)
Port number
For details on each setting, see the online help
available from each web page.
When the setup is complete, the connection can be tested by clicking the Test button (the connection test takes
approximately 10 seconds).
Event Types
An Event Type describes how and when the camera performs certain actions.
Example: If somebody passes in front of a camera and an event has been configured to detect and respond to motion,
the camera can record and saves images to an FTP server, and can send a notification e-mail to an e-mail address. Images
can be sent as e-mail attachments.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Events
Triggered Event
A triggered event could be activated by:
•
•
•
•
a manually activated action, such as from an action button in the web interface
detected movement in a configured motion detection window
on restart (reboot), after power loss
camera tampering
How to set up a triggered event
The following example describes how to set up the camera to upload images when the main door is opened.
1. Click Add triggered... on the Event Types page. The Triggered Event Type Setup page appears.
2. Enter a descriptive Name for the event, such as Motion Detection. To configure motion detection see page 23.
3. Set the Priority - High, Normal or Low (see the online help).
4. Set the Respond to Trigger... parameters to define when the event is active, for example, after office hours.
5. Select the trigger alternative from the Triggered by... drop-down list.
6. Set the When Triggered... parameters, that is what the camera will do if motion is detected; for example, upload
images to an FTP server or send an e-mail notification.
7. Click OK to save the event in the Event Types list.
Please see the online help
for descriptions of each available option.
Note:
Up to 10 event types can be configured in the camera, and up to three of these can be configured to upload images.
File names can be formatted according to specific requirements. See File Naming & Date/Time Formats in the online
help
.
Pre-trigger and Post-trigger buffers
This function is useful to see what happened immediately before and/or after a trigger, for example, 30 seconds before and/or
after a door was opened. Check the Save stream checkbox under Event Types > Add Triggered... > When Triggered... to view
the options. All uploaded images are JPEG images.
Include pre-trigger buffer - contains images from the time immediately preceding the trigger. Check the box to enable the
pre-trigger buffer, enter the desired length of time and specify the required image frequency.
Include post-trigger buffer - contains images from the time immediately after the trigger. Configure as for pre-trigger.
Notes
•
•
•
Pre-trigger and Post-trigger buffers will be lost if the connection to the event server fails
The maximum length of the pre-/post-buffer depends on the video image size and selected frame rate
If the pre- or post-buffer is too large for the camera’s internal memory, the frame rate is reduced and individual
images may be missing. If this occurs, an entry is created in the unit's log file
Continue image upload (unbuffered) - enables the upload of video images for a fixed length of time. Specify the length of
time for the uploaded recording, in seconds, minutes or hours, or for as long as the trigger is active. Finally, set the desired
image frequency to the maximum (the maximum available) or to a specified frame rate. The frame rate will be the best
possible, but might not be as high as specified, especially if uploading via a slow connection.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Events
Scheduled Event
A Scheduled event can be activated at preset times, in a repeating pattern on selected weekdays.
Configuration example:
1. Click Add scheduled... on the Event Types page.
2. Enter a descriptive Name for the event, such as Scheduled e-mail upload.
3. Set the Priority (High, Normal or Low).
4. Set the Activation Time parameters (24h clock) for the event - start on Sundays at 13.00 with a duration of 12 hours.
5. Set the When Activated... parameters, (what the camera would do at the specified time) for example, send uploaded
images to an e-mail address.
6. Click OK to save the Event in the Event Types list.
Please see the online help
for descriptions of each available option.
Camera Tampering
The camera tampering application generates an alarm whenever the camera is repositioned, or when the lens is covered,
sprayed, or severely defocused.
First, you must create an event, see How to set up a triggered event, on page 20, for the camera to send an alarm.
Settings
The Minimum duration parameter sets the minimum tampering period, that is an alarm will not be triggered until this period
has lapsed, even if the tampering conditions are otherwise met. This can help prevent false alarms for known conditions that
affect the image.
If the camera lens is sprayed or covered so that the camera live view becomes dark, it will not be possible to distinguish this
situation from other situations where the same effect is seen, such as when lighting conditions change.
When the Alarm for dark images parameter is enabled, alarms are generated for all cases where the lights are either dimmed
or turned off, or if the lens is sprayed, covered, or rendered severely out of focus. If not enabled, no alarm will be sent.
After you define these settings, click Save.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Events
Motion Detection
Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. It is possible to
configure a total of 10 Include and/or Exclude windows for motion detection.
•
•
Included windows target specific areas within the whole video image
Excluded windows define areas within an Include window that should be ignored (areas outside Include windows are
automatically ignored)
Once configured, the motion detection windows appear in the list of available triggers, for triggering events. See How to set
Note:
Using the motion detection feature may decrease the camera’s overall performance.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Events
Configuring Motion Detection
1. Click Motion Detection in the Events menu.
2. Click the New button against Windows Name.
3. Select the Configure Included Windows or the Configure Excluded Windows option to define an Include or Exclude
window, and enter a descriptive name in the field below.
4. Adjust the size (drag the bottom right-hand corner) and position (click on the text at the top and drag to the desired
position) of the active window.
5. Adjust the Object Size, History and Sensitivity profile sliders (see table below for details). Any detected motion within
an active window is then indicated by red peaks in the Activity window (the active window has a red frame).
6. Click Save.
To exclude parts of the Include window, select the Exclude option and position the
Exclude window as required, within the Include window.
Please see the online help
for descriptions of each available option.
Object Size
History
Sensitivity
High level
Low level
Only very large objects An object that appears in the region Ordinary colored objects on ordinary
trigger motion detec- will trigger the motion detection for backgrounds will trigger the motion
tion
a long period
detection
Even very small objects An object that appears in the region Only very bright objects on a dark
trigger motion detec- will trigger motion detection for only background trigger motion detection
tion
a very short period
Default value Low
High
High
•
•
Avoid triggering on small objects in the video image by setting the object size level to high.
Use several small Motion Detection windows rather than one large window, if triggers on small movements or
objects are desired.
•
•
To reduce the number of triggers if there is a lot of movement during a short period of time, select a high history
level.
To only detect flashing light, select low sensitivity. In other cases, a high sensitivity level is recommended.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
System Options
Security
Users
User access control is enabled by default. An administrator can set up other users, by giving them user names and passwords.
It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page, as described
below:
The user list displays the authorized users and user groups (levels):
Viewer
Provides the lowest level of access, which only allows access to the Live View page.
Operator
An operator can view the Live View page, create and modify events, and adjust certain other
settings. Operators have no access to System Options.
Administrator An administrator has unrestricted access to all menus for configuration and can determine the
registration of all other users.
HTTP/RTSP Password Settings - Select the type of password. You may need to allow unencrypted passwords if there are
viewing clients that do not support encryption, or if you recently upgraded the firmware and the existing clients support
encryption, but need to log in again, and be configured to use this functionality.
User Settings - Check the relevant box to enable anonymous viewer login - allows any viewer direct access to the Live
View page.
Enable Basic Setup - Before using the AXIS M3011 Network Camera, there are certain settings that should be made, most
of which require Administrator access privileges. To quickly access these settings use the Basic Setup in the menu. All settings
are also available from the standard setup links in the menu. Basic Setup is enabled by default but can be disabled and
removed from the menu.
IP Address Filter
Enable IP Address Filtering to allow or deny access to the network cameras. Once enabled, the IP addresses in the list are
allowed or denied access according to the choice made in the drop-down list Allow/Deny the following IP addresses.
The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses). The users
from these IP addresses need to be specified in the user list with the appropriate access rights. This is done from Setup >
System Options > Security > Users.
HTTPS
The network cameras support encrypted browsing using HTTPS.
A self-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click the Create
self-signed Certificate button to install a self-signed certificate. Although self-signed certificates are free and offer some
protection, true security is only implemented after the installation of a signed certificate issued by a certificate authority.
A signed certificate can be obtained from an issuing Certificate Authority by clicking the Create Certificate Request button.
When the signed certificate is returned, click the Install signed certificate button to import the certificate. The properties of
any certificate request currently resident in the camera or installed can also be viewed by clicking the Properties... button. The
HTTPS Connection Policy must also be set in the drop-down lists to enable HTTPS in the camera.
For more information, please refer to the online help
.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
Date & Time
Current Server Time - Displays the current date and time (24h clock). The time can be displayed in 12h clock format in the
overlay (see below).
New Server Time - Select your time zone from the drop-down list. If you want the server clock to automatically adjust for
daylight savings time, select the Automatically adjust for daylight saving time changes option.
From the Time Mode section, select the preferred method to use for setting the time:
•
•
•
Synchronize with computer time - sets the time from the clock on your computer.
Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60 minutes.
Set manually - this option allows you to manually set the time and date.
Note:
If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.
See Network > Basic TCP/IP Settings below.
Date & Time Format Used in Images - Specify the formats for the date and time (12h or 24h) displayed in the video streams.
Use the predefined formats or use your own custom date and time formats. See Advanced File Naming & Date/Time Formats
in the online help
for information on how to create your own date and time formats.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
Network
Basic TCP/IP Settings
AXIS M3011 support both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version
must always be enabled. When using IPv4, the IP address for the camera can be set automatically via DHCP, or a static IP
address can be set manually. If IPv6 is enabled, the network cameras receive an IP address according to the configuration in
the network router. There are also options for setting up notification of changes in the IP address, and for using the AXIS
Internet Dynamic DNS Service. For more information on setting the IP address, please see the online help
Network Settings - Click the View button for an overview of the IP configuration of the network camera.
IPv4 Address Configuration - Check the Enable IPv4 box option to enable IPv4.
.
Obtain IP address via DHCP - Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators
centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP
server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known IP address for a
particular MAC address.
Note:
DHCP should only be enabled if your DHCP server can update a DNS server, which then allows you to access the AXIS
M3011 Network Camera by name (host name). If DHCP is enabled and you cannot access the unit, run AXIS IP Utility
to search the network for connected Axis products or reset the network camera to factory default settings and then
perform the installation again.
Use the following IP address - To use a static IP address for the AXIS M3011 Network Camera, check the radio button
and then make the following settings:
•
IP address - Specify a unique IP address for your AXIS M3011 Network Camera. (To check if the IP address you intend
to use is available or not, click the Test button)
•
•
Subnet mask - Specify the mask for the subnet the AXIS M3011 Network Camera is located on
Default router - Specify the IP address of the default router (gateway) used for connecting devices attached to differ-
ent networks and network segments.
IPv6 Address Configuration - Check the Enable IPv6 box option to enable IPv6. Other settings for IPv6 are configured in
the network router.
Services - Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, which associates
the unit's MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional
resetting of the IP address.
Notes:
•
The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is set.
In order to reset the IP address, the camera must be restarted to activate ARP/Ping for an additional two minutes.
Pinging the unit is still possible when this service is disabled.
•
26
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
Enable AVHS - AXIS Video Hosting System (AVHS) in conjunction with an AVHS service provides easy and secure Internet
access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service
•
One-click enabled - Press the camera’s control button (see Hardware Overview, on page 5) until the status LED
blinks green to install the camera using an AVHS service. Once registered the camera stays connected to the AVHS
service. If the camera is not registered within 24 hours after the button is pressed, the camera will disconnect from
the AVHS service.
•
Always - The camera will constantly attempt to connect to the AVHS service over the Internet. Once registered the
camera will stay connected to the service. This option can be used when the camera is already installed and it is not
convenient to use the one-click installation.
AXIS Internet Dynamic DNS Service - Use the AXIS Internet Dynamic DNS service to assign a host name for easy access to
your network camera (requires Internet access).
Click Settings... to register the camera with the Axis Internet Dynamic DNS service, or to modify the existing settings (requires
access to the Internet). The domain name currently registered at the Axis Internet Dynamic DNS service for your product can
at any time be removed.
For more information, please refer to the online help
.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
Advanced TCP/IP Settings
DNS Configuration - DNS (Domain Name Service) provides the translation of host names to IP addresses on your network.
Obtain DNS server address via DHCP - Automatically use the DNS server settings provided by the DHCP server. Click the View
button to see the current settings.
Use the following DNS server address - Enter the desired DNS server by specifying the following:
Domain name - Enter the domain(s) to search for the host name used by the network cameras. Multiple domains can be
separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name, for example, myserver is
the host name in the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is the Domain name.
Primary and Secondary DNS servers - Enter the IP addresses of the primary, and secondary DNS servers.
Note:
This is not mandatory with regard to secondary DNS servers.
NTP Configuration - Obtain NTP server address via DHCP - Check this radio button to automatically look up and use the
NTP server settings as provided by DHCP. Click the View button to see the current settings.
Use the following NTP server address - To create manual settings, check this radio button and enter the host name or IP
address of the NTP server.
Host Name Configuration - The network cameras can be accessed using a host name, instead of an IP address. The host
name is usually the same as the assigned DNS Name.
Link-Local IPv4 Address - This is enabled by default and assigns the network cameras an additional IP address for use
with UPnP™. The camera can have both a Link-Local IP and a static/DHCP-supplied IP address at the same time - these will
not affect each other.
HTTP and HTTPS - The default HTTP/HTTPS port numbers (80 and 443 respectively) can be changed to any port within the
range 1024-65535. This is useful for simple security port mapping, for example.
NAT traversal (port mapping) for IPv4 - A broadband router allows devices on a private network (LAN) to share a single
connection to the Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the
Internet. Security on the private network (LAN) is increased since most broadband routers are pre-configured to stop attempts
to access the private network (LAN) from the public network/Internet.
Use NAT traversal when your network cameras are located on an intranet (LAN) and you wish to make it available from the
other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT
router is forwarded to the camera.
LAN (intranet)
WAN (internet)
Broadband
(NAT)
router
ISP
28
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
Notes:
•
For NAT traversal to work, this must be supported by the broadband router.
•
The broadband router has many different names: “NAT router”, “Network router“, Internet Gateway”, “Broadband
sharing device” or “Home firewall” but the essential purpose of the device is the same.
Enable/Disable - when enabled, the network cameras attempt to configure port mapping in a NAT router on your network,
using UPnP™. Note that UPnP™ must be enabled in the camera (see System Options > Network > UPnP).
Use manually selected NAT router - select this option to manually select a NAT router and enter the IP address for the router
in the field provided.
If a router is not manually specified, the network cameras automatically search for NAT routers on your network. If more than
one router is found, the default router is selected.
Alternative HTTP port - select this option to manually define an external HTTP port. Enter the port number in the field
provided. If no port is entered here a port number is automatically selected when NAT traversal is enabled.
Notes:
•
An alternative HTTP port can be used/be active even if NAT traversal is disabled. This is useful if your NAT router does
not support UPnP and you need to manually configure port forwarding in the NAT router.
If you attempt to manually enter a port that is already in use, another available port is automatically selected.
When the port is selected automatically it is displayed in this field. To change this enter a new port number and click
Save.
•
•
FTP - The FTP server running in the network cameras enables the upload of new firmware, and user applications. Check the
box to enable the service.
RTSP - The RTSP protocol allows a connecting client to start an H.264/MPEG-4 stream. Check the box to enable the server
and enter the RTSP port number to use. The default setting is 554. Note that MPEG-4 and H.264 video streams will not be
available if this service is not enabled.
SOCKS
SOCKS is a networking proxy protocol. The Axis network camera can be configured to use a SOCKS server to reach networks
on the other side of a firewall/proxy server. This functionality is useful if the network camera is located on a local network
behind a firewall, and notifications, uploads, alarms, and such need to be sent to a destination outside the local network (such
as the Internet). See the online help
for more information.
QoS (Quality of Service)
Quality of Service (QoS) guarantees a certain level of a specified resource to selected traffic on a network. Quality can be
defined as a maintained level of bandwidth, low latency, and no packet losses. The main benefits of a QoS-aware network can
be summarized as:
•
•
The ability to prioritize traffic and thus allow critical flows to be served before flows with lesser priority.
Greater reliability in the network, thanks to the control of the amount of bandwidth an application may use, and thus
control over bandwidth races between applications.
The QoS in Axis network video products marks the data packets for various types of network traffic originating from the
product. This makes it possible for network routers and switches to reserve a fixed amount of bandwidth for these types of
traffic. The network cameras mark the following types of traffic:
•
•
•
video
event/alarm
management network traffic
29
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
QoS Settings - For each type of network traffic supported by your Axis network video product, enter a DSCP
(Differentiated Services Codepoint) value. This value is used to mark the traffic’s IP header. When the marked traffic reaches a
network router or switch, the DSCP value in the IP header tells the router or switch the type of treatment to apply to this type
of traffic, for example, how much bandwidth to reserve for it. Note that DSCP values can be entered in decimal or hex form,
but saved values are always shown in decimal.
SMTP (email)
Enter the host names (or IP addresses) and port numbers for your primary and secondary mail servers in the fields provided, to
enable the sending of notifications and image email messages from the camera to predefined addresses via SMTP.
If your mail server requires authentication, check the box for Use authentication to log in to this server and enter the
necessary information. See the online help
for more information.
SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is
the group of devices and management station running SNMP. Community names are used to identify groups.
Depending on the level of security required, select the version of SNMP to use. The three levels of security are:
SNMP v1/v2
Select either SNMP V1 that includes no security, or SNMP V2c that uses very simple security.
The community name can be specified as a password for read or read/write access to all supported SNMP objects. The
community is the group of network devices using SNMP. The default password for the Read Community is public and the
default password for the Write community is write.
Traps for SNMP v1/v2
Traps are used by the camera to send messages to a management system for important events or status changes.
If Enable traps is selected, enter the email address where the trap message is to be sent as well as the Trap community that
should receive the message.
There are four types of traps available for the AXIS M3011.
•
•
•
•
Cold start
Warm start
Link up
Authentication failed
SNMP v3
SNMP V3 - provides encryption and secure passwords. HTTPS must be enabled. To use traps with SNMP v3 an SNMP v3
management application is required.
If the Enable SNMP v3 option is enabled, provide the Initial user password. Note that the initial password is activated only
when HTTPS is enabled and can only be set once.
If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.
When SNMP configuration is ready, click Save to use the new settings or Reset to return to the default values.
UPnP™
The network camera includes support for UPnP™. UPnP™ is enabled by default, and the network camera then is automatically
detected by operating systems and clients that support this protocol.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
RTP
RTP/ MPEG-4 & H.264 - These settings are the port range, IP address, port number (video), and Time-To-Live value to use
for the video stream(s) in multicast MPEG-4 and H.264 format. Only certain IP addresses and port numbers should be used for
multicast streams. For more information, please see the online help
.
Bonjour
The network cameras include support for Bonjour. When enabled, the camera is automatically detected by operating systems
and clients that support this.
LED
retrieved using multicast.
. Note that the LED does not flash when the stream is
Maintenance
•
Restart - the camera is restarted without changing any settings.
•
Restore - the unit is restarted and most current settings are reset to factory default values. The settings that do not
reset are:
•
•
•
•
•
the boot protocol (DHCP or static)
the static IP address
the default router
the subnet mask
the product interface language
•
Default - the default button should be used with caution. Pressing this returns the camera's settings to the factory
default values (including the IP address).
Support
The Support Overview page provides valuable information on troubleshooting and contact information, should you require
technical assistance.
System Overview provides an overview of the camera’s status and settings. Information that can be found here includes the
camera’s firmware version, IP address, security, event and image settings and recent log items. Many of the captions are also
links to the proper Setup page to conveniently make adjustments in the camera’s settings.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
Logs & Reports
When contacting Axis support, please be sure to provide a valid
Server Report with your query. The Access Log is automatically
included in the server report.
Information - the Server Report and Parameter List may prove
useful when troubleshooting a problem or when contacting the Axis
support web.
•
•
System Log - Provides information about system events.
Access Log - By default, the Access Log lists all failed
attempts to access the camera but can be configured to
list all connections to the camera, whether successful or not. Go to Support > Logs & Reports > Configuration
and select the desired level of information from the list. See Configuration - From the drop-down lists, select the
level of information to be added to the System Log and Access Log files and the permitted size of the log files., on
page 32 for more information.
The Access Log is useful for various purposes such as tracking all access to the camera, simple web attraction
tracking, system analysis and troubleshooting.
•
Server Report - Provides information about the server status and should always be included when requesting
support.
•
•
Parameter List - Shows the unit's parameters and their current settings.
Connection List - Lists all clients that are currently accessing video. It is also used for system analysis and
troubleshooting.
Configuration - From the drop-down lists, select the level of information to be added to the System Log and Access Log files
and the permitted size of the log files.
The default information level for the Access Log is set to Critical & Warnings, i.e. failed connections. However, in an error
situation and when requesting support, set it to the highest information level - Critical & Warnings & Info.
For the Log Level for Email, select from the drop-down list the level of information to send as email and enter the destination
email address.
Advanced
Scripting is an advanced function that enables you to customize and use scripts. This function is a very powerful tool.
Caution!
Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does cause problems,
reset the unit to its factory default settings. A backup file may be of use to return the unit to its latest configuration.
Axis recommends that you do not use this function unless you understand the consequences. Note that Axis support does
not provide assistance for problems with customized scripts.
File Upload - To use your own files as custom settings, upload the files first to the AXIS M3011 Network Camera. Browse to
select the file. Select the User level for the uploaded file. When the file is displayed correctly in the text field, click the Upload
button.
Plain Config - this function is for the advanced user with experience of Axis network camera configuration. All parameters
can be set and modified from this page. Help is available from the standard help pages.
About
Here you can find basic information about your network camera. You can also view third party software licenses.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - System Options
Resetting to Factory Default Settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described
in Maintenance, on page 31) or use the Control button on the side of the camera (see page 5) as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1. Disconnect the power cable or if using PoE, disconnect the network cable.
2. Press and hold the Control button while reconnecting power.
3. Keep the Control button pressed until the Status indicator color changes to amber (this may take up to 15 seconds).
4. Release the Control button.
5. When the Status indicator changes to green (which may take up to 1 minute), the process is complete and the camera
has been reset. The unit now has the default IP address 192.168.0.90
Note:
For other methods of setting the IP address, please refer to the product’s Installation Guide that accompanies the
33
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Troubleshooting
Troubleshooting
Checking the Firmware
Firmware is software that determines the functionality of the network cameras. One of your first actions when
troubleshooting a problem should be to check the current firmware version. The latest version may contain a correction that
fixes your particular problem. The current firmware version in your camera is displayed on the page Setup > Basic Setup or
under About.
Upgrading the Firmware
When you upgrade your camera with the latest firmware from the Axis Web site, your camera receives the latest functionality
available. Always read the upgrade instructions and release notes available with each new release, before updating the
firmware.
Note:
Preconfigured and customized settings are saved when the firmware is upgraded (providing the features are available
in the new firmware) although this is not guaranteed by Axis Communications. Always read the instructions and
release notes available with each new release, before upgrading the firmware.
1. Save the firmware file to your computer.
The latest version of the firmware is
available free of charge from the Axis
website at www.axis.com/techsup
2. Go to Setup > System Options >
Maintenance in the camera’s web pages.
3. In the Upgrade Server section, browse to
the desired firmware file on your
computer. Click Upgrade.
Notes:
•
After starting the upgrade process,
always wait at least 5-10 minutes before
restarting the camera, even if you suspect the upgrade has failed.
Your dealer reserves the right to charge for any repair attributable to faulty upgrading by the user.
The AXIS Camera Management software tool can be used for multiple upgrades. Please see the Axis website at
•
•
Emergency Recovery Procedure
If power or the network connection to the camera is lost during the upgrade, the process fails and the unit becomes
unresponsive. A flashing red Status LED indicates a failed upgrade.To recover the unit, follow the steps below. The serial
number is found on the label attached to the bottom of the camera.
1. UNIX/Linux - From the command line, type the following:
arp -s <IP address of camera> <serial number> temp
ping -s 408 <IP address of camera>
Windows - From a command/DOS prompt, type the following:
arp -s <IP address of camera> <serial number>
ping -l 408 -t <IP address of camera>
2. If the unit does not reply within a few seconds, restart it and wait for a reply. Press CTRL+C to stop Ping.
3. Open a browser and type in the camera’s IP address. In the page that appears, use the Browse button to select the
upgrade file to use, for example, axism3011.bin. Then click the Load button to restart the upgrade process.
4. After the upgrade is complete (1-10 minutes), the unit automatically restarts and shows a steady green on the Power
and Status LEDs and flashing green or amber on the Network LED.
5. Reinstall the camera, referring to the installation guide.
If the emergency recovery procedure does not get the camera up and running again, please contact Axis support at
34
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Troubleshooting
Axis Support
If you contact Axis support, please help us to help you solve your problems by providing the server report, the log file and a
detailed description of the problem.
Server Report - go to Setup > System Options > Support > Support Overview. The server report contains important
information about the server and its software, as well as a list of the current parameters.
The Log file is available from Setup > System Options > Support > Logs & Reports. The Log file records events in the unit
since the last system restart and can be a useful diagnostic tool when troubleshooting.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Troubleshooting
Symptoms, Possible Causes, and Remedial Action
Problems setting the IP address
When using ARP/Ping
Try installation again. The IP address must be set within two minutes after power is
applied to the camera. Ensure the Ping length is set to 408. See Installation Guide.
The camera is located on a different
subnet
If the IP address intended for the camera and the IP address of your computer are
located on different subnets, you will not be able to set the IP address. Contact your
network administrator to obtain an appropriate IP address.
The IP address is being used by another
device
Disconnect the camera from the network. Run the Ping command. (In a Com-
mand/DOS window, type ping and the IP address of the unit).
If you receive: Reply from <IP address>: bytes = 32; time = 10 ms..... - this means
that the IP address may already be in use by another device on your network. You
must obtain a new IP address and reinstall the unit.
If you see: Request timed out - this means that the IP address is available for use
with your camera. In this case, check all cabling and reinstall the unit.
Possible IP address conflict with
another device on the same subnet
The static IP address in the camera is used before the DHCP server sets a a dynamic
address. This means that if the same default static IP address is used by another
device, there may be problems accessing the camera. To avoid this, set the static IP
address to 0.0.0.0.
The camera cannot be accessed from a browser
The IP address has been changed by
DHCP
If the camera and client are on the same network, Run AXIS IP Utility to locate the
camera. Identify the camera using its model or serial number. Alternatively:
1) Move the camera to an isolated network or to one with no DHCP or BOOTP server.
Set the IP address again, using the AXIS IP Utility (see the Installation Guide) or the
ARP/Ping commands.
2) Access the unit and disable DHCP in the TCP/IP settings. Return the unit to the
main network. The unit now has a fixed IP address that will not change.
3) As an alternative to 2), if dynamic IP address via DHCP or BOOTP is required, select
the required service and then configure IP address change notification from the net-
work settings. Return the unit to the main network. The unit now has a dynamic IP
address, but will notify you if the address changes.
Other networking problems
Test the network cable by connecting it to another network device, then Ping that
device from your workstation. See instructions above.
Camera is accessible locally, but not externally
Broadband router configuration
To configure your broadband router to allow incoming data traffic to the camera,
enable the NAT-traversal feature which will attempt to automatically configure the
router to allow access to the camera.
This is enabled from Setup > System Options > Network > TCP/IP Advanced.
Firewall protection
Check the Internet firewall with your system administrator.
Check if you need to configure the default router settings.
Default routers required
Problems with the MPEG-4/H.264 format
No MPEG-4/H.264 displayed in the
client
Check that the correct network interface is selected in the AMC control panel applet
(network tab).
Check that the relevant MPEG-4/H.264 connection methods are enabled in the AMC
control panel applet (network tab).
In the AMC control applet, select the MPEG-4/H.264 tab and click the button Set to
default MPEG-4/H.264 decoder.
No multicast MPEG-4/H.264 displayed
in the client
Check with your network administrator that the multicast addresses used by the
camera are valid for your network.
Check with your network administrator if there is a firewall preventing viewing.
Multicast MPEG-4/H.264 only accessi-
ble by local clients
Check if your router supports multicasting, or if the router settings between the cli-
ent and the server need to be configured. The TTL (Time To Live) value may need to be
increased.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Troubleshooting
Poor rendering of MPEG-4/H.264
images
Color depth set incorrectly on clients. Set to 16-bit or 32-bit color.
In the case of blurred text overlays, or other rendering problems, you may need to
enable Advanced Video Rendering from the MPEG-4/H.264 tab in the AMC control
panel applet.
Ensure that your graphics card is using the latest device driver. The latest drivers can
usually be downloaded from the manufacturer's web site.
Color saturation is different in
MPEG-4/H.264 and Motion JPEG
Modify the settings for your graphics adapter. Please see the adapter's documenta-
tion for more information.
Lower frame rate than expected
Reduce number of applications running on the client computer.
Limit the number of simultaneous viewers.
Check with the system administrator that there is enough bandwidth available. See
also the online help.
Check in the AMC control panel applet (MPEG-4/H.264 tab) that video processing is
not set to Decode only I frames.
Lower the image resolution.
Why do I not get 30 frames per second?
Image degeneration
Decrease the GOV length, see the online help for more information.
The Power indicator is not constantly lit
Faulty power supply
Check that you are using the same indoor power supply that came with the product.
The Network indicator LEDs are flashing red rapidly
Hardware failure
Contact your Axis dealer.
No images displayed on web page
Problem with AMC.
(Internet Explorer only)
To enable the updating of video images in Microsoft Internet Explorer, set your
browser to allow ActiveX controls. Also, make sure that AXIS Media Control (AMC)
component is installed on your computer.
Installation of additional ActiveX com-
ponent restricted or prohibited
Configure your camera to use a Java applet for updating the video images under
Live View Config > Layout > Default Viewer for Internet Explorer. See the online
help for more information.
Video/Image problems, general
Image too dark or too light
Missing images in uploads
Check the video image settings. See the online help on Video and Image Settings.
This can occur when trying to use a larger image buffer than is actually available. Try
lowering the frame rate or the upload period.
Slow image update
Poor performance
Configuring pre-buffers, motion detection, high-resolution images, or high frame
rates, will affect the performance of the camera.
Poor performance may be caused by heavy network traffic, multiple users accessing
the unit, low performance clients, use of features such as Motion Detection, Event
handling, Image rotation other than 180 degrees.
Poor quality snapshot images
Screen incorrectly configured on your
workstation
In Display Properties, configure your screen to show at least 65000 colors, that is, at
least 16-bit. Using only 16 or 256 colors will produce dithering artifacts in the image.
Overlay/Privacy mask is not displayed
Incorrect size or location of overlay or
privacy mask.
The overlay or privacy mask may have been positioned incorrectly or may be too
large. Refer to Overlay Image Requirements and Limitations in the online help for
more information.
Browser freezes
Older browsers
Update your browser and Java to latest versions.
Problems uploading files
Limited space
There is only limited space available for the upload of your own files. Try deleting
existing files to free up space.
Motion Detection triggers unexpectedly
Changes in luminance
Motion detection is based on changes in luminance in the image. This means that if
there are sudden changes in the lighting, motion detection may be triggered mistak-
enly. Lower the sensitivity setting to avoid problems with luminance.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Technical Specifications
Technical Specifications
Function/group
Camera
Item
Specification
Models
Image sensor
Lens
AXIS M3011
¼” Progressive scan RGB VGA CMOS
• 3.0 mm, F2.0, fixed iris
• Angle of view
horizontal: 66°
vertical: 48°
Light sensitivity
Shutter time
1 lux, F2.0
1/5000 s to 1/4 s
Video
Video compression
• H.264 Baseline profile
• Motion JPEG
• MPEG-4 Part 2 (ISO/IEC 14496-2)
Resolutions
160x120 to 640x480
Frame rate H.264
• 30 fps in all resolutions
Frame rate MPEG-4 • 30 fps in all resolutions
Part 2
Frame rate
• 30 fps in all resolutions
Motion JPEG
Video streaming
• Multi-stream H.264, MPEG-4 Part 2 and Motion JPEG.
• H.264/MPEG-4 Part 2: 1 stream in full frame rate and resolution. More
streams if identical or limited in frame rate/resolution, max 3 individually
configured streams.
• Motion JPEG: 2 individually configured streams in full frame rate and
resolution. More streams if identical or limited in frame rate/resolution.
• Controllable frame rate and bandwidth
• VBR/CBR H.264 & MPEG-4 Part 2
Image settings
• Compression, color, brightness, sharpness, contrast, white balance, exposure
control, exposure zones, backlight compensation, fine tuning of behavior at
low light
• Rotation: 0°, 180°
• Text and image overlay
• Privacy mask
Users
• 10 simultaneous users
• Unlimited number of users using multicast (H.264/MPEG-4)
Network
Security
• Password protection, IP address filtering, HTTPS encryption, network access
control, digest authentication, user access log
Supported protocols IPv4/v6, HTTP, HTTPS, SSL/TLS*, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour,
UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP,
IGMP, RTCP, ICMP, DHCP, ARP, SOCKS.
*This product includes software developed by the Open SSL Project for use in
the Open SSL Tool kit (www.openssl.org)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Technical Specifications
Function/group
Item
Specification
System
Integration
Application
Programming
Interface
Open API for software integration, including VAPIX® from Axis
Communications*, AXIS Media Control SDK*, event trigger data in video
stream
Quality of Service (QoS) layer 3, DiffServ Model
Embedded Linux operating system
Intelligent Video
Alarm triggers
Video motion detection, active tampering alarm
• Intelligent video
• Manual trigger
• On boot
Alarm events
Video buffer
• File upload via FTP, HTTP and email
• Notification via email, HTTP and TCP
16 MB pre- and post alarm
Video access from
web browser
• Camera live view
• Video recording to file (ASF)
• Customizable HTML pages
• Windows 7, Windows Vista, XP, 2000, 2003 server
• DirectX 9c or higher
Installation,
management and
• AXIS Camera Management tool on CD and web-based configuration
maintenance
General
Casing
Electrogalvanized steel and plastic
Processors, memory
Power
ARTPEC-B, 64MB RAM, 32MB Flash
Power over Ethernet IEEE 802.3af class 1. max 3.84W
RJ-45 10BASE-T/100BASE-TX PoE
Connectors
Operating conditions • Temperature: 0 – 50 ºC (32 – 122 ºF)
• Humidity 20-80% RH (non-condensing)
Approvals
• EN 55022 Class B
• EN 61000-3-2
• EN 61000-3-3
• EN 55024
• FCC Part 15 Subpart B Class B
• ICES-003 Class B
• VCCI Class B
• C-tick AS/NZS CISPR 22
• MIC Class B
• EN 60950-1
Dimensions (DxH)
Weight
D=91.6mm (3.61"), H=105.3mm (4.14")
260 g (0.6 lb.) (midspan not included)
Included accessories
Power over Ethernet midspan (1 port) including mains cable
(Midspan not included in bulk pack), Installation Guide, CD
with installation tools, recording software and user manual,
Windows decoder 1-user license
Video management
software
(not included)
AXIS Camera Station - Video management software for viewing and
recording up to 50 cameras
via partners
Optional accessories Plastic drop ceiling mount ring in a selection of colors (black, silver, gold and
white)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Technical Specifications
General performance considerations
When setting up your system, it is important to consider how various settings and situations will affect performance. Some
factors affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both. If the
load on the CPU reaches its maximum, this will also affect the frame rate.
The following factors are among the most important to consider:
•
•
•
High image resolutions and/or lower compression levels result in larger images. Bandwidth affected.
Access by large numbers of Motion JPEG and/or unicast H.264 clients. Bandwidth affected.
Simultaneous viewing of different streams (resolution, compression) by different clients. Effect on frame rate and
bandwidth.
•
•
•
•
Accessing both Motion JPEG and H.264 video streams simultaneously. Frame rate and bandwidth affected.
Heavy usage of event settings affects the camera’s CPU load. Frame rate affected.
Heavy network utilization due to poor infrastructure. Framerate affected.
Viewing on poorly performing client PCs lowers perceived performance. Frame rate affected.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Glossary of Terms
CCD (Charged Coupled Device) - This light-sensitive image
device used in many digital cameras is a large integrated circuit
that contains hundreds of thousands of photo-sites (pixels)
that convert light energy into electronic signals. Its size is
measured diagonally and can be 1/4", 1/3", 1/2" or 2/3".
Glossary of Terms
ActiveX - A standard that enables software components to
interact with one another in a networked environment,
regardless of the language(s) used to create them. web
browsers may come into contact with ActiveX controls, ActiveX
documents, and ActiveX scripts. ActiveX controls are often
downloaded and installed automatically as required.
CGI (Common Gateway Interface) - A specification for
communication between a web server and other (CGI)
programs. For example, a HTML page that contains a form
might use a CGI program to process the form data once it is
submitted.
Angle - The field of view, relative to a standard lens in a 35mm
still camera, expressed in degrees, e.g. 30°. For practical
purposes, this is the area that a lens can cover, where the angle
of view is determined by the focal length of the lens. A
wide-angle lens has a short focal length and covers a wider
angle of view than standard or telephoto lenses, which have
longer focal lengths.
CIF (Common Intermediate Format) - CIF refers to the analog
video resolutions 352x288 pixels (PAL) and 352x240 pixels
(NTSC). See also Resolution.
Client/Server - Client/server describes the relationship
between two computer programs in which one program, the
client, makes a service request from another program, the
server, which fulfils the request. Typically, multiple client
programs share the services of a common server program. A
web browser is a client program that requests services (the
sending of web pages or files) from a web server.
ARP (Address Resolution Protocol) - This protocol is used to
associate an IP address to a hardware MAC address. A request
is broadcast on the local network to discover the MAC address
for an IP address.
ARTPEC (Axis Real Time Picture Encoder) - This chip is used
for image compression, and image processing such as
conversion of raw image sensor data, color correction,
sharpening, noise filtering etc.
CMOS (Complementary Metal Oxide Semiconductor) - A
CMOS is a widely used type of semiconductor that uses both
negative and positive circuits. Since only one of the circuit
types is on at any given time, CMOS chips require less power
than chips using just one type of transistor. CMOS image
sensors also allow processing circuits to be included on the
same chip, an advantage not possible with CCD sensors, which
are also much more expensive to produce.
ASIC (Application Specific Integrated Circuit) - A circuit
designed for a specific application, as opposed to a general
purpose circuit, such as a microprocessor.
Aspect ratio - A ratio of width to height in images. A common
aspect ratio used for television screens and computer monitors
is 4:3. High-definition television (HDTV) uses an aspect ratio of
9:16.
Codec - In communications engineering, a codec is usually a
coder/decoder. Codecs are used in integrated circuits or chips
that convert e.g. analog video signals into a digital format for
transmission. The codec also converts received digital signals
back into analog format. A codec uses analog-to-digital
conversion and digital-to-analog conversion in the same chip.
Autoiris (DC-Iris) - This special type of iris is electrically
controlled by the camera, to automatically regulate the amount
of light allowed to enter.
Codec can also mean compression/decompression, in which
case it is generally taken to mean an algorithm or computer
program for reducing the size of large files and programs.
Bitmap - A bitmap is a data file representing a rectangular grid
of pixels. It defines a display space and color for each pixel (or
‘bit’) in the display space. This type of image is known as a
‘raster graphic.’ GIFs and JPEGs are examples of image file types
that contain bitmaps.
Compression - See Image compression.
DC-Iris (Autoiris) - This special type of iris is electrically
controlled by the camera, to automatically regulate the amount
of light allowed to enter.
Because a bitmap uses this fixed raster method, it cannot easily
be rescaled without losing definition. Conversely, a vector
graphic image uses geometrical shapes to represent the image,
and can thus be quickly rescaled.
DHCP (Dynamic Host Configuration Protocol) - DHCP is a
protocol that lets network administrators automate and
centrally manage the assignment of Internet Protocol (IP)
addresses to network devices in a network.
Bit rate - The bit rate (in kbit/s or Mbit/s) is often referred to
as speed, but actually defines the number of bits/time unit and
not distance/time unit.
DHCP uses the concept of a ‘lease’ or amount of time that a
given IP address will be valid for a computer. The lease time can
vary, depending on how long a user is likely to require the
network connection at a particular location.
Bonjour - Also known as zero-configuration networking,
Bonjour enables devices to automatically discover each other
on a network, without having to enter IP addresses or configure
DNS servers. Bonjour is a trademark of Apple Computer, Inc.
DHCP also supports static addresses for e.g. computers running
web servers, which need a permanent IP address.
Broadband - In network engineering terms, this describes
transmission methods where two or more signals share the
same carrier. In more popular terminology, broadband is taken
to mean high-speed data transmission.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Glossary of Terms
DNS (Domain Name System) - DNS is used to locate and
translate Internet domain names into IP (Internet Protocol)
addresses. A domain name is a meaningful and
easy-to-remember name for an Internet address. For example
remember than 192.0.34.166. The translation tables for domain
names are contained in Domain name servers.
Gateway - A gateway is a point in a network that acts as an
entry point to another network. In a corporate network for
example, a computer server acting as a gateway often also acts
as a proxy server and a firewall server. A gateway is often
associated with both a router, which knows where to direct a
given packet of data that arrives at the gateway, and a switch,
which furnishes the actual path in and out of the gateway for a
given packet.
Domain Server - Domains can also be used by organizations
who wish to centralize the management of their (Windows)
computers. Each user within a domain has an account that
usually allows them to log in to and use any computer in the
domain, although restrictions may also apply. The domain
server is the server that authenticates the users on the network.
GIF (Graphics Interchange Format) - GIF is one of the most
common file formats used for images in web pages. There are
two versions of the format, 87a and 89a. Version 89a supports
animations, i.e. a short sequence of images within a single GIF
file. A GIF89a can also be specified for interlaced presentation.
Ethernet - Ethernet is the most widely installed local area
network technology. An Ethernet LAN typically uses special
grades of twisted pair wires. The most commonly installed
Ethernet systems are 10BASE-T and 100BASE-T10, which
provide transmission speeds up to 10 Mbps and 100 Mbps
respectively.
GOV (Group Of VOPs) - A group of VOPs is the basic unit of
an H.264 video stream. The GOV contains different types and
numbers of VOPs (I-VOPs, P-VOPs) as determined by the GOV
length and GOV structure. See also VOP.
GOV length - The GOV length determines the number of
images (VOPs) in the GOV structure. See also GOV and VOP.
ETRAX (Ethernet Token Ring AXIS) - Axis' own
microprocessor.
GOV structure - The GOV structure describes the composition
of an H.264 video stream, as regards the type of images (I-VOPs
or P-VOPs) included in the stream, and their internal order. See
also GOV and VOP.
Factory default settings - These are the settings that
originally applied for a device when it was first delivered from
the factory. If it should become necessary to reset a device to
its factory default settings, this will, for many devices,
completely reset any settings that were changed by the user.
H.264 - Also known as MPEG-4 Part 10. This is the new
generation compression standard for digital video. H.264 offers
higher video resolution than Motion JPEG or MPEG-4 at the
same bit rate and bandwidth, or the same quality video at a
lower bit rate.
Firewall - A firewall works as a barrier between networks, e.g.
between a Local Area Network and the Internet. The firewall
ensures that only authorized users are allowed to access the
one network from the other. A firewall can be software running
on a computer, or it can be a standalone hardware device.
Half-duplex - See Full-duplex.
HTML (Hypertext Markup Language) - HTML is the set of
"markup" symbols or codes inserted in a file intended for
display in web browser. The markup tells the browser how to
display the page's words and images for the user.
Focal length - Measured in millimeters, the focal length of a
camera lens determines the width of the horizontal field of
view, which in turn is measured in degrees.
FTP (File Transfer Protocol) - An application protocol that
uses the TCP/IP protocols. It is used to exchange files between
computers/devices on networks.
HTTP (Hypertext Transfer Protocol) - HTTP is the set of rules
for exchanging files (text, graphic images, sound, video, and
other multimedia files) on the web. The HTTP protocol runs on
top of the TCP/IP suite of protocols.
Frame - A frame is a complete video image. In the 2:1
interlaced scanning format of the RS-170 and CCIR formats, a
frame is made up of two separate fields of 262.5 or 312.5 lines
interlaced at 60 or 50 Hz to form a complete frame, which
appears at 30 or 25 Hz. In video cameras with a progressive
scan, each frame is scanned line-by-line and not interlaced;
most are also displayed at 30 and 25 Hz.
Hub - A (network) hub is used to connect multiple devices to
the network. The hub transmits all data to all devices
connected to it, whereas a switch will only transmit the data to
the device it is specifically intended for.
Image compression - Image compression minimizes the file
size (in bytes) of an image. Two of the most common
compressed image formats are JPEG and GIF.
Frame rate - The frame rate used to describe the frequency at
which a video stream is updated is measured in frames per
second (fps). A higher frame rate is advantageous when there is
movement in the video stream, as it maintains image quality
throughout.
Interlacing - Interlaced video is video captured at 50 pictures
(known as fields) per second, of which every 2 consecutive
fields (at half height) are then combined into 1 frame.
Interlacing was developed many years ago for the analog TV
world and is still used widely today. It provides good results
when viewing motion in standard TV pictures, although there is
always some degree of distortion in the image.
Gain - Gain is the amplification factor and the extent to which
an analog amplifier boosts the strength of a signal.
Amplification factors are usually expressed in terms of power.
The decibel (dB) is the most common way of quantifying the
gain of an amplifier.
To view interlaced video on e.g. a computer monitor, the video
must first be de-interlaced, to produce progressive video, which
consists of complete images, one after the other, at 25 frames
per second. See also Progressive scan.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Glossary of Terms
IP (Internet Protocol) - The Internet Protocol is a method
transmitting data over a network. Data to be sent is divided
into individual and completely independent "packets." Each
computer (or host) on the Internet has at least one address that
uniquely identifies it from all others, and each data packet
contains both the sender's address and the receiver's address.
Mbit/s (Megabits per second) - A measure of the bit rate, i.e.
the rate at which bits are passing a given point. Commonly
used to give the ‘speed’ of a network. A LAN might run at 10 or
100 Mbit/s. See also Bit rate.
Monitor - A monitor is very similar to a standard television set,
but lacks the electronics to pick up regular television signals.
The Internet Protocol ensures that the data packets all arrive at
the intended address. As IP is a connectionless protocol, which
means that there is no established connection between the
communication end-points, packets can be sent via different
routes and do not need to arrive at the destination in the
correct order.
Motion JPEG - Motion JPEG is a simple
compression/decompression technique for networked video.
Latency is low and image quality is guaranteed, regardless of
movement or complexity of the image. Image quality is
controlled by adjusting the compression level, which in turn
provides control over the file size, and thereby the bit rate.
Once the data packets have arrived at the correct destination,
another protocol - Transmission Control Protocol (TCP) - puts
them in the right order. See also TCP.
High-quality individual images from the Motion JPEG stream
are easily extracted. See also JPEG.
IP Address - An IP address is simply an address on an IP
network used by a computer/device connected to that network.
IP addresses allow all the connected computers/devices to find
each other and to pass data back and forth.
Megapixel - See Pixel.
MPEG (Moving Picture Experts Group) - The Moving Picture
Experts Group develops standards for digital video and audio
compression. It operates under the auspices of the
International Organization for Standardization (ISO). The MPEG
standards are an evolving series, each designed for a different
purpose.
To avoid conflicts, each IP address on any given network must
be unique. An IP address can be assigned as fixed, so that it
does not change, or it can be assigned dynamically (and
automatically) by DHCP.
An IP address consists of four groups (or quads) of decimal
digits separated by periods, e.g. 130.5.5.25. Different parts of
the address represent different things. Some part will represent
the network number or address, and some other part will
represent the local machine address.
MPEG-2 - MPEG-2 is the designation for a group of audio and
video coding standards, and is typically used to encode audio
and video for broadcast signals, including digital satellite and
Cable TV. MPEG-2, with some modifications, is also the coding
format used by standard commercial DVD movies.
See also IP (Internet Protocol).
MPEG-4 - A video compression standard that makes good use
of bandwidth, and which can provide DVD-quality video
streams at less than 1 Mbit/s.
I-VOP - See VOP.
JPEG (Joint Photographic Experts Group) - Together with
the GIF file format, JPEG is an image file type commonly used
on the web. A JPEG image is a bitmap, and usually has the file
suffix '.jpg' or ".jpeg." When creating a JPEG image, it is
possible to configure the level of compression to use. As the
lowest compression (i.e. the highest quality) results in the
largest file, there is a trade-off between image quality and file
size.
Multicast - Bandwidth-conserving technology that reduces
bandwidth usage by simultaneously delivering a single stream
of information to multiple network recipients.
Network connectivity - The physical (wired or wireless) and
logical (protocol) connection of a computer network or an
individual device to a network, such as the Internet or a LAN.
kbit/s (kilobits per second) - A measure of the bit rate, i.e. the
rate at which bits are passing a given point. See also Bit rate.
NTSC (National Television System Committee) - NTSC is the
television and video standard in the United States. NTSC
delivers 525 lines at 60 half-frames/second.
LAN (Local Area Network) - A LAN is a group of computers
and associated devices that typically share common resources
within a limited geographical area.
NWay - A network protocol that automatically negotiates the
highest possible common transmission speed between two
devices.
Linux - Linux is an open source operating system within the
UNIX family. Because of its robustness and availability, Linux
has won popularity in the open source community and among
commercial application developers.
PAL (Phase Alternating Line) - PAL is the dominant television
standard in Europe. PAL delivers 625 lines at 50
half-frames/second.
MAC address (Media Access Control address) - A MAC
address is a unique identifier associated with a piece of
networking equipment, or more specifically, its interface with
the network. For example, the network card in a computer has
its own MAC address.
Ping - Ping is a basic network program used diagnostically to
check the status of a network host or device. Ping can be used
to see if a particular network address (IP address or host name)
is occupied or not, or if the host at that address is responding
normally. Ping can be run from e.g. the Windows Command
prompt or the command line in UNIX.
Manual iris - This is the opposite to an autoiris, i.e. the camera
iris must be adjusted manually to regulate the amount of light
allowed to reach the image sensor.
Pixel - A pixel is one of the many tiny dots that make up a
digital image. The color and intensity of each pixel represents a
tiny area of the complete image.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Glossary of Terms
PoE (Power over Ethernet) - Power over Ethernet provides
power to a network device via the same cable as used for the
network connection. This is very useful for IP-Surveillance and
remote monitoring applications in places where it may be too
impractical or expensive to power the device from a power
outlet.
e.g. 320x240.
Alternatively, the total number of pixels (usually in megapixels)
in the image can be used. In analog systems it is also common
to use other format designations, such as CIF, QCIF, 4CIF, etc.
RTCP (Real-Time Control Protocol) - RTCP provides support
for real-time conferencing of groups of any size within an
intranet. This support includes source identification and
support for gateways like audio and video bridges as well as
multicast-to-unicast translators.
PPP (Point-to-Point Protocol) - A protocol that uses a serial
interface for communication between two network devices. For
example, a PC connected by a phone line to a server.
RTCP offers quality-of-service feedback from receivers to the
multicast group as well as support for the synchronization of
different media streams.
PPTP (Point-to-Point Tunneling Protocol) - A protocol (set
of communication rules) that allows corporations to extend
their own corporate network through private "tunnels" over the
public Internet. In this way a corporation can effectively use a
WAN (Wide Area Network) as a large single LAN (Local Area
Network). This kind of interconnection is known as a virtual
private network (VPN).
RTP (Real-Time Transport Protocol) - RTP is an Internet
protocol for the transport of real-time data, e.g. audio and
video. It can be used for media-on-demand as well as
interactive services such as Internet telephony.
Pre/post alarm images - The images from immediately before
and after an alarm. These images are stored in a buffer for later
retrieval.
RTSP (Real Time Streaming Protocol) - RTSP is a control
protocol, and a starting point for negotiating transports such as
RTP, multicast and Unicast, and for negotiating codecs.
Progressive scan - Progressive scan, as opposed to interlaced
video, scans the entire picture, line by line every sixteenth of a
second. In other words, captured images are not split into
separate fields as in interlaced scanning.
RTSP can be considered a ‘remote control’ for controlling the
media stream delivered by a media server. RTSP servers typically
use RTP as the protocol for the actual transport of audio/video
data.
Computer monitors do not need interlace to show the picture
on the screen, but instead show them progressively, on one line
at a time in perfect order, i.e. 1, 2, 3, 4, 5, 6, 7 etc., so there is
virtually no ‘flickering’ effect. In a surveillance application, this
can be critical when viewing detail within a moving image,
such as a person running. A high-quality monitor is required to
get the best from progressive scan. See also Interlacing.
Router - A device that determines the next network point to
which a packet should be forwarded on its way to its final
destination. A router creates and/or maintains a special routing
table that stores information on how best to reach certain
destinations. A router is sometimes included as part of a
network switch. See also switch.
Server - In general, a server is a computer program that
provides services to other computer programs in the same or
other computers. A computer running a server program is also
frequently referred to as a server. In practice, the server may
contain any number of server and client programs. A web server
is the computer program that supplies the requested HTML
pages or files to the client (browser).
Protocol - A special set of rules governing how two entities
will communicate. Protocols are found at many levels of
communication, and there are hardware protocols and software
protocols.
Proxy server - In an organization that uses the Internet, a
proxy server acts as an intermediary between a workstation
user and the Internet. This provides security, administrative
control, and a caching service. Any proxy server associated with
a gateway server, or part of a gateway server, effectively
separates the organization’s network from the outside network
and the local firewall. It is the firewall server that protects the
network against outside intrusion.
Sharpness - This is the control of fine detail within a picture.
This feature was originally introduced into color TV sets that
used notch filter decoders. This filter took away all high
frequency detail in the black and white region of the picture.
The sharpness control attempted to put some of that detail
back in the picture. Sharpness controls are mostly superfluous
in today's high-end TVs. The only logical requirement for it
nowadays is on a VHS machine.
A proxy server receives requests for Internet services (such as
web page requests) from many users. If the proxy server is also
a cache server, it looks in its local cache of previously
downloaded web pages. If it finds the page, it is returned to the
user without forwarding the request to the Internet. If the page
is not in the cache, the proxy server, acting as a client on behalf
of the user, uses one of its own IP addresses to request the page
from another server over the Internet. When the requested
page is returned, the proxy server forwards it to the user that
originally requested it.
SMTP (Simple Mail Transfer Protocol) - SMTP is used for
sending and receiving e-mail. However, as it is ‘simple,’ it is
limited in its ability to queue messages at the receiving end,
and is usually used with one of two other protocols, POP3 or
IMAP. These other protocols allow the user to save messages in
a server mailbox and download them periodically from the
server.
SMTP authentication is an extension of SMTP, whereby the
client is required to log into the mail server before or during the
sending of email. It can be used to allow legitimate users to
send email while denying the service to unauthorized users,
such as spammers.
P-VOP - See VOP.
Resolution - Image resolution is a measure of how much detail
a digital image can hold: the greater the resolution, the greater
the level of detail. Resolution can be specified as the number of
pixel-columns (width) by the number of pixel-rows (height),
44
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Glossary of Terms
SNMP (Simple Network Management Protocol) - SNMP
forms part of the Internet Protocol suite, as defined by the
Internet Engineering Task Force. The protocol can support
monitoring of network-attached devices for any conditions
that warrant administrative attention.
congestion. This is suitable for live video, as there is no point in
re-transmitting old information that will not be displayed
anyway.
Unicast - Communication between a single sender and a single
receiver over a network. A new connection is established for
each new user.
Sockets - Sockets are a method for communication between a
client program and a server program over a network. A socket is
defined as ‘the endpoint in a connection.’ Sockets are created
and used with a set of programming requests or ‘function calls’
sometimes called the sockets application programming
interface (API).
URL (Uniform Resource Locator) - An "address" on the
network.
Varifocal lens - A varifocal lens provides a wide range of focal
lengths, as opposed to a lens with a fixed focal length, which
only provides one.
SSL/TSL (Secure Socket Layer/Transport Layer Security)
These two protocols (SSL is succeeded by TSL) are cryptographic
protocols that provide secure communication on a network. SSL
is commonly used over HTTP to form HTTPS, as used e.g. on the
Internet for electronic financial transactions. SSL uses public
key certificates to verify the identity of the server.
VPN (Virtual Private Network) - This creates a secure
"tunnel" between the points within the VPN. Only devices with
the correct "key" will be able to work within the VPN. The VPN
network can be within a company LAN (Local Area Network),
but different sites can also be connected over the Internet in a
secure way. One common use for VPN is for connecting a
remote computer to the corporate network, via e.g. a direct
phone line or via the Internet.
Subnet/subnet mask - A subnet is an identifiably separate
part of an organization's network. Typically, a subnet may
represent all the machines at one geographic location, in one
building, or on the same local area network (LAN). Having an
organization's network divided into subnets allows it to be
connected to the Internet with a single shared network address.
VOP (Video Object Plane) - A VOP is an image frame in an
H.264 video stream. There are several types of VOP:
The subnet mask is the part of the IP address that tells a
network router how to find the subnet that the data packet
should be delivered to. Using a subnet mask saves the router
having to handle the entire 32-bit IP address; it simply looks at
the bits selected by the mask.
- An I-VOP is complete image frame.
- A P-VOP codes the differences between images, as long as it
is more efficient to do so. Otherwise it codes the whole image,
which may also be a completely new image.
WAN (Wide-Area-Network) - Similar to a LAN, but on a
larger geographical scale.
Switch - A switch is a network device that connects network
segments together, and which selects a path for sending a unit
of data to its next destination. In general, a switch is a simpler
and faster mechanism than a router, which requires knowledge
about the network and how to determine the route. Some
switches include the router function. See also Router.
W-LAN (Wireless LAN) - A wireless LAN is a wireless local
area network that uses radio waves as its carrier: where the
network connections for end-users are wireless. The main
network structure usually uses cables.
TCP (Transmission Control Protocol) - TCP is used along with
the Internet Protocol (IP) to transmit data as packets between
computers over the network. While IP takes care of the actual
packet delivery, TCP keeps track of the individual packets that
the communication (e.g. requested a web page file) is divided
into, and, when all packets have arrived at their destination, it
reassembles them to re-form the complete file.
Web server - A web server is a program, which allows web
browsers to retrieve files from computers connected to the
Internet. The web server listens for requests from web browsers
and upon receiving a request for a file sends it back to the
browser.
The primary function of a web server is to serve pages to other
remote computers; consequently, it needs to be installed on a
computer that is permanently connected to the Internet. It also
controls access to the server whilst monitoring and logging
server access statistics.
TCP is a connection-oriented protocol, which means that a
connection is established between the two end-points and is
maintained until the data has been successfully exchanged
between the communicating applications.
WPA-PSK (Wi-Fi Protected Access - Pre-Shared Key) - This
wireless encryption method uses a pre-shared key (PSK) for key
management. Keys can usually be entered as manual hex
values, as hexadecimal characters, or as a Passphrase.
WPA-PSK provides a greater degree of security than WEP.
Telnet - Telnet is a simple method with which to access
another network device, e.g. a computer. The HTTP protocol and
the FTP protocols allow you to request specific files from
remote computers, but do not allow you logon as a user of that
computer. With Telnet, you log on as a regular user with
whatever privileges you may have been granted for specific
applications and data residing on that computer.
Zoom lens - A zoom lens can be moved (zoomed) to enlarge
the view of an object to show more detail.
UDP (User Datagram Protocol) - UDP is a communications
protocol that offers limited service for exchanging data in a
network that uses the Internet Protocol (IP). UDP is an
alternative to the Transmission Control Protocol (TCP). The
advantage of UDP is that it is not required to deliver all data
and may drop network packets when there is e.g. network
45
Download from Www.Somanuals.com. All Manuals Search And Download.
AXIS M3011 - Index
A
N
Action Buttons 11, 22
P
B
Bit Rate 16
Q
C
R
D
S
E
T
F
Frame Rate 15
U
G
V
H
I
L
M
46
Download from Www.Somanuals.com. All Manuals Search And Download.
|