VW246/VK246
LCD Monitor
User’s manual
M
EGA
1.3
PIXELS
MENU
MENU
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’
s instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
As an Energy Star® Partner, our company has determined that this product meets
the Energy Star® guidelines for energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iv
Safety information
•
Before setting up the monitor, carefully read all the documentation that came
with the package.
•
To prevent fire or shock hazard, never expose the monitor to rain or moisture.
•
Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
•
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
•
•
•
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extention cords. Overloading can result in
fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100-240V AC.
•
If you encounter technical problems with the monitor, contact a qualified
service technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.
v
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the LCD. Never spray cleaner directly on the screen, as it may drip
inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the fluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears.
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
•
When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the following
symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself
when trying to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a
task.
NOTE: Tips and additional information to help you complete a
task.
vi
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1.
2.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
vii
1.
Product introduction
1.1
Welcome!
Thank you for purchasing the ASUS® VW246/VK246 LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper, broader, and
brighter display, plus a host of features that enhance your viewing experience.
Besides, VK246 provides the built-in 1.3 mega-pixel webcam, which enhances
image quality. No need for installing additional driver while having a video
conference or chatting with friends online!
With these features, you can enjoy the convenience and delightful audio-visual
experience that VW246/VK246 brings you!
1.2
Package contents
Check your VW246/VK246 LCD monitor package for the following items:
•
•
•
•
•
•
•
•
LCD monitor
Support CD (VK246 only)
Quick start guide
Power cord x1
VGA cable x1
DVI cable x1
USB 2.0 cable x1 (VK246 only)
Audio cable x1
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS VW246/VK246 LCD Monitor
1
1.3
Monitor introduction
Front view
1.3.1
VW246
1.3 mega-pixel
Webcam
VK246
M
EGA
1.3
PIXELS
M
E
N
U
MENU
Base
MENU
Control panel
1
2
3
4
5
6
7
1.
button:
•
Use this hotkey to switch from five video preset modes (Game Mode,
Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with
SPLENDID™ Video Enhancement Technology.
•
Exit the OSD menu or go back to the previous menu as the OSD menu
is active.
•
Automatically adjust the image to its optimized position, clock, and phase
by pressing this button for 2–3 seconds (VGA input only).
2.
button:
•
Press this button to decrease the value of the function selected or move
left/up to the previous function.
•
This is also a hotkey for Volume adjustment.
3.
4.
MENU button:
•
Press this button to enter/select the icon (function) highlighted while the
OSD is activated.
button:
•
•
Press this button to increase the value of the function selected or move
right/down to the next function.
This is also a hotkey for Brightness adjustment.
button
5.
•
Use this hotkey to switch among the three input sources (VGA, DVI,
HDMI).
Press
(Input Select Button) to display HDMI signals after you connect HDMI
cable with monitor.
2
ASUS VW246/VK246 LCD Monitor
6.
7.
button
Press this button to turn the monitor on/off
Power indicator
The color definition of the power
•
•
Status
Blue
Description
ON
indicator is as the table at the right
side.
Amber
OFF
Standby mode
OFF
1.3.2
Back view
VW246
VK246
Stereo speakers
1.3 mega-pixel
Webcam
(2Wx2)
VESA
wall
mount
screw
holes
Cable
hook
1
2
3
4
5
6
7
Rear connectors
1.
2.
3.
4.
5.
6.
7.
AC-IN port. Connects the power cord.
Audio out port. Connects to external speakers.
Audio in port. Connects to PC audio source.
USB 2.0 port (VK246 only). For activating the built-in webcam.
HDMI port. For high-definition multimedia interface (HDMI) signal connection.
DVI port. For DVI-D digital signal connection.
VGA port. For VGA analog signal connection.
The VESA wall mount kit (100 mm x 100 mm) is purchased separately.
ASUS VW246/VK246 LCD Monitor
3
2.
Setup
2.1
Assembling the monitor base
To assemble the monitor base:
1.
2.
Have the front of the monitor face down on a table.
Connect the base with the arm according to the below drawing. A click sond
shows that the base has been connected successfully.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
•
Hold the stand to prevent the monitor from falling when you change its angle.
•
You can adjust the monitor’s angle from -3˚–20˚.
-3˚–20˚
It is normal that the monitor slightly shakes while you adjust the the viewing
angle.
4
ASUS VW246/VK246 LCD Monitor
2.3
Detaching the arm/base (for VESA wall mount)
The detachable arm/base of the VW246/VK246 LCD monitor is specially designed
for VESA wall mount.
To detach the arm/base:
1.
2.
3.
Have the front of the monitor face down on a table.
Remove the rubbers in the four screw holes (Figure 1).
Use a screwdriver to remove the two arm screws, and then slide out the
arm/base to detach it from the monitor (Figure 2).
Rubbers in the
screw holes
Arm screws
Arm/base
Figure 1
Figure 2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
ASUS VW246/VK246 LCD Monitor
5
2.4
Connecting the cables
Connect the cables as shown:
VK246
1. Power cord
2. Audio-out cable
3. Audio-in cable
4. USB 2.0 cable
5. HDMI signal cable
6. DVI signal cable
7. VGA signal cable
1
2
3
4
5
6
7
VW246
1
2
3
5
6
7
The HDMI cable and audio-out cable are purchased separately.
•
•
To connect the power cord: connect one end of the power cord
securely to the monitor’s AC input port, the other end to a power outlet.
Before you connect the cables, ensure that your PC is switched off or the power
cord is unpluged from the wall socket.
To connect the signal cables: connect one end of the signal cable(s) to
the monitor, the other end to your computer or any other video device.
When the HDMI, DVI, and VGA cables are connected simultaneously, you can
switch the input source from the Input Select item of the OSD functions, or by
using the hotkey
on the front panel.
•
•
To connect the audio cable: connect the audio cable from the monitor’s
audio-in port to the computer's audio-out port.
To connect to external speakers: Connect an audio-out cable from
the audio-out port of the LCD monitor to the audio-in port of external
speakers.
2.5
Turning on the monitor
Gently press the power button
. See page 2 for the location of the power button.
The power indicator lights up in blue to show that the monitor is ON.
6
ASUS VW246/VK246 LCD Monitor
2.6
Built-in webcam support
With the built-in webcam, VK246 allows you to take pictures, have a video
conference, or record video clips. While chatting with friends via Internet-based
communication tools, you can directly show your vivid image.
System requirements
•
•
•
•
•
A personal computer with Pentium® III 800 MHz or higher processor
Microsoft® Windows® Vista / XP Service Pack 2 (3) operating systems
Minimum 200 MB free hard disk space to run the program
128 MB of RAM or above
A display card supporting 16-bit high color mode
•
•
Make sure that the bundled USB cable is connected to both the LCD
monitor and your PC. Otherwise, the webcam will not be activated.
Make sure that you have installed the Windows® Vista / XP Service Pack 2 (3)
or later versions before using the device.
Using the device
The device transmits images to your PC through the USB 2.0 port. Therefore,
make sure that the bundled USB cable is connected to both the LCD monitor and
your PC before you use the device.
2.7
LifeFrame 2 software
ASUS VK246 provides the easy-to-use LifeFrame 2 software that can work with
the webcam, allowing users to create their own photos or video clips.
•
LifeFrame 2 only supports Microsoft® Windows® Vista / XP Service Pack 2 (3)
operating systems.
•
The LifeFrame 2 software is bundled in the support CD.
Installation instructions
1.
2.
3.
Close all other applications.
Insert the support CD into the optical drive and run the LifeFrame 2 program.
Follow the on-screen instructions to complete the installation
ASUS VW246/VK246 LCD Monitor
7
3.
General Instruction
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
1.
Press the MENU button to activate the
OSD menu.
2.
Press
and
to navigate through
the functions. Highlight and activate the
desired function by pressing the MENU
button. If the function selected has a sub-
menu, press
and
again to
navigate through the sub-menu functions.
Highlight and activate the desired sub-
menu function by pressing the MENU button.
3.
4.
Press
and
to change the settings of the selected function.
To exit the OSD menu, press the
adjust any other function.
button. Repeat step 2 and step 3 to
3.1.2
OSD Function Introduction
Splendid
1.
This function contains five sub-functions
you can select for your preference. Each
mode has the Reset selection, allowing
you to maintain your setting or return to
the preset mode.
•
Scenery Mode: best choice for
scenery photo display with
SPLENDID™ Video Enhancement.
•
•
•
•
Standard Mode: best choice for document editing with SPLENDID™
Video Enhancement.
Theater Mode: best choice for movie with SPLENDID™ Video
Enhancement.
Game Mode: best choice for game playing with SPLENDID™ Video
Enhancement.
Night View Mode: best choice for dark-scene game or movie with
SPLENDID™ Video Enhancement.
•
•
In the Standard Mode, the ASCR, Satuation, and Sharpness functions are
not user-configurable.
Except in the Standard Mode, the sRGB function is not user-configurable.
8
ASUS VW246/VK246 LCD Monitor
2.
Image
You can adjust brightness, contrast,
sharpness, saturation, position (VGA input
only), ASCR, and focus (VGA input only)
from this main function.
•
Brightness: the adjusting range is
from 0 to 100.
is a hotkey to
activate this function.
•
Contrast: the adjusting range is from
0 to 100.
•
•
•
•
ASCR: turns on/off the ASCR(ASUS Smart Contrast Ratio) function.
Sharpness: the adjusting range is from 0 to 100.
Saturation: the adjusting range is from 0 to 100.
Position: adjusts the horizontal postition (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
•
Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
•
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
3.
Color
Select the image color you like from this
function.
•
Color Temp.: contains five color
modes including Cool, Normal, Warm,
sRGB, and User mode.
•
Skin Tone: contains three color
modes including Reddish, Natural,
and Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
ASUS VW246/VK246 LCD Monitor
ꢀ
4.
Input Select
Select from VGA, DVI, and HDMI input
sources.
5.
System Setup
Allow you to adjust the system.
•
•
Volume: the adjusting range is from
0 to 100.
is a hotkey to activate
this function.
OSD Setup:
* Adjusts the horizontal postition
(H-Position)/ the vertical position
(V-Position) of the OSD from 0 to 100.
* Adjusts the OSD timeout from 10 to 120.
*
Enables or disables the DDC/CI function.
•
Language: there are ten languages for your selection, including English,
German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese,
Simplified Chinese, and Japanese.
•
•
•
Aspect Control: adjusts the aspect ratio to “Full” or “4:3”.
Information: shows the monitor information.
All Reset: “Yes” allows you to restore the default setting.
10
ASUS VW246/VK246 LCD Monitor
3.2
Specifications summary (VK246)
Panel Type
Panel size
TFT LCD
24" (16:ꢀ) wide screen
Max. Resolution
Pixel pitch
Full HD 1ꢀ20 x 1080
0.277mm
240cd/m2
300cd/m2
Brightness (Typ.)
Brightness (Max.)
Contrast Ratio (Typ.)
Contrast Ratio (Max.)
Viewing angle(H/V) CR>10
Display colors
1000:1
20000:1 (with ASCR ON)
170˚/160˚
16.7M
Response time
2ms (Gray to Gray)
1.3 mega-pixels
Built-in webcam
SPLENDID™ Video
Enhancement
Yes
SPLENDID™ selection
Auto adjustment
Color temperature selection
Skin-Tone selection
HDMI input
5 video preset modes (by hotkey)
Yes (by hotkey)
5 color temperatures
3 skin-tones
HDMI (VK246H)
Digital input
DVI-D with HDCP (VK246H/U)
D-Sub
Analog input
Audio-in port
3.5 mm Mini-jack
3.5 mm Mini-jack
Black
Earphone Jack
Colors
Speaker (Built-in)
Power LED
2W x 2 Stereo, RMS
Blue (On)/ Amber (Standby)
100 x 100mm
VESA wall mount
Tilt
-3˚–20˚
Kensington lock
Voltage rating
Power consumption
Yes
AC: 100~240V
Power On : < 4ꢀW, Standby: < 2W, Power Off: <1W
568 mm x 422 mm x 230 mm (machine)
645 mm x 477 mm x 186 mm (package)
Dimension (W x H x D)
Weight (Esti.)
5.5 kg (Net) ; 8 kg (Gross)
0˚C–40˚C
Temperature (Operating)
Temperature (Non-operating)
Humidity (Operating)
Humidity (Non-operating)
-20˚C–60˚C
10%~ꢀ0%
5%~ꢀ0%
10 languages (English, German, Italian, French, Dutch, Spanish,
Russian, Traditional Chinese, Simplified Chinese, Japanese)
Multi-languages
Accessories
VGA cable, DVI cable, audio cable, USB cable, power cord, quick
start guide, warranty card
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,
Vista Premium (VK246H/U), Vista Basic (VK246S),
C-Tick, BSMI, VCCI, RoHS, WEEE, PSB
Regulation approvals
*Specifications are subject to change without notice.
ASUS VW246/VK246 LCD Monitor
11
Specifications summary (VW264)
Panel Type
TFT LCD
Panel size
24" (16:ꢀ) wide screen
Full HD 1ꢀ20 x 1080
0.277mm
Max. Resolution
Pixel pitch
240cd/m2
300cd/m2
Brightness (Typ.)
Brightness (Max.)
Contrast Ratio (Typ.)
Contrast Ratio (Max.)
Viewing angle(H/V) CR>10
Display colors
1000:1
20000:1 (with ASCR ON)
170˚/160˚
16.7M
Response time
2ms (Gray to Gray)
SPLENDID™ Video
Enhancement
Yes
SPLENDID™ selection
Auto adjustment
Color temperature selection
Skin-Tone selection
HDMI input
5 video preset modes (by hotkey)
Yes (by hotkey)
5 color temperatures
3 skin-tones
HDMI (VW246H)
DVI-D with HDCP (VW246H/U)
D-Sub
Digital input
Analog input
Audio-in port
3.5 mm Mini-jack
3.5 mm Mini-jack
Black
Earphone Jack
Colors
Speaker (Built-in)
Power LED
2W x 2 Stereo, RMS
Blue (On)/ Amber (Standby)
100 x 100mm
VESA wall mount
Tilt
-3˚–20˚
Kensington lock
Voltage rating
Power consumption
Yes
AC: 100~240V
Power On : < 4ꢀW, Standby: < 2W, Power Off: <1W
568 mm x 410 mm x 230 mm (machine)
645 mm x 477 mm x 186 mm (package)
Dimension (W x H x D)
Weight (Esti.)
5.5 kg (Net); 8 kg (Gross)
0˚C–40˚C
Temperature (Operating)
Temperature
-20˚C–60˚C
(Non-operating)
Humidity (Operating)
Humidity (Non-operating)
10%~ꢀ0%
5%~ꢀ0%
10 languages (English, German, Italian, French, Dutch, Spanish,
Russian, Traditional Chinese, Simplified Chinese, Japanese)
VGA cable, DVI cable, audio cable, power cord, quick start guide,
warranty card
Multi-languages
Accessories
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,
Vista Premium (VW246H/U), Vista Basic (VW246S),
C-Tick, BSMI, VCCI, RoHS, WEEE, PSB
Regulation approvals
*Specifications are subject to change without notice.
12
ASUS VW246/VK246 LCD Monitor
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
Power LED is not ON
• Press the
button to check if the monitor is in
the ON mode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
The power LED lights amber and
there is no screen image
• Check if the monitor and the computer are in the
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of
the pins are bent.
• Connect the computer with another available
monitor to check if the computer is
properly working.
Screen image is too light or dark
• Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
• Press the
button for 2–3 seconds to
sized properly
automatically adjust the image (VGA input only).
• Adjust the H-Position or V-Position settings via
OSD (VGA input only).
Screen image bounces or a wave
pattern is present in the image
• Make sure the signal cable is properly
connected to the monitor and the computer.
• Move away electrical devices that may cause
electrical interference.
Screen image has color defects (white • Inspect the signal cable and make sure that
does not look white)
none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select the
Color Temperature via OSD.
Screen image is blurry or fuzzy
• Press the
button for 2–3 seconds to
automatically adjust the image (VGA input only).
• Adjust the Phase and Clock settings via OSD
(VGA input only).
No sound or sound is low (for models • Ensure that the audio cable is properly
with speakers)
connected to the monitor and the computer
• Adjust the volume settings of both your
monitor and computer.
• Ensure that the computer sound card driver
is properly installed and activated.
Webcam is not working
• Make sure that you have connected the USB cable
securely to both the LCD monitor and your
computer.
• Make sure that you use the Microsoft® Windows®
Vista / XP Service Pack 2 (3) operating systems.
ASUS VW246/VK246 LCD Monitor
13
3.4
Supported operating modes
Resolution
Frequency
Vertical
Frequency
Horizontal
Frequency
Standard
Pixel
DOS
VGA
720 x 400
640 x 480
70Hz
60Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
65Hz
70Hz
75Hz
60Hz
75Hz
60Hz
31.47KHz
31.47KHz
37.90KHz
37.50KHz
35.16KHz
37.90KHz
48.10KHz
46.90KHz
31.02KHz
48.40KHz
56.50KHz
60.02KHz
67.50KHz
49.62KHz
44.69KHz
47.78KHz
60.29KHz
60.00KHz
64.00KHz
80.00KHz
47.71KHz
55.94KHz
75KHz
28.32MHz
25.18MHz
31.50MHz
31.50MHz
36.00MHz
40.00MHz
50.00MHz
49.50MHz
33.75MHz
65.00MHz
75.00MHz
78.75MHz
108.00MHz
83.375MHz
74.375MHz
79.50MHz
102.25MHz
108.00MHz
108.00MHz
135.00MHz
85.50MHz
106.00MHz
162.00MHz
175.5MHz
189.00MHz
202.5MHz
146.25MHz
187MHz
640 x 480
640 x 480
SVGA
800 x 600
800 x 600
800 x 600
800 x 600
WVGA
XGA
848 x 480
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 800
1280 x 720
1280 x 768
1280 x 768
1280 x ꢀ60
1280 x 1024
1280 x 1024
1366 x 768
1440 x ꢀ00
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
1680 x 1050
1680 x 1050
1ꢀ20 x 1080
XGA+
WXGA
QVGA
SXGA
WXGA
WXGA+
UXGA
81.25KHz
87.5KHz
93.75KHz
65.29KHz
82.30KHz
74.03KHz
WSXGA+
Full HD (Primary)
154MHz
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that
you choose a mode listed in the table above.
* This monitor supports Full HD (480i/p, 576i/p, 720p, 1080i/p) video contents from game consoles,
DVD players and other consumer video devices.
14
ASUS VW246/VK246 LCD Monitor
|
