Philips AJ3980AJ3980CD User Manual

1
5
4
3
2
1
CD Clock Radio  
AJ3980  
6
7
8
&
^
Read this manual first!  
Return  
If you have any problems, do not attempt  
to return this product to the store.  
yourWarranty  
Registration Card  
within 10 days  
9
For fast help, call us first!  
1-800-531-0039  
0
!
Y
#
%
@
$
2
VOLUME  
/
CD  
RADIO  
TIME ALARM  
WAKE-UP TRACK  
SLEEP TIMER  
CD / RADIO OFF  
DAILY ALARM  
RESET  
REPEAT ALARM  
BRIGH T N ESS C O N T RO L  
AJ3980 CD Clock radio  
3
PHILIPS CONSUMER ELECTRONICS  
NORTH AMERICA  
Knoxville, Tennessee 37914-1810, U.S.A.  
TIME  
English  
Français  
Español  
PM  
AL  
1
TIME  
PRESET  
SET AL  
1
HOUR TIME SET MINUTE SET AL  
2
W
CLASS 1  
AJ3980  
4
LASER PRODUCT  
Meet Philips at the Internet  
Printed in China  
7
5
CD  
S LEEP TIMER  
VOLUME  
/
CD  
RADIO  
TIME ALARM  
VOLUME  
/
CD  
RADIO  
TIME ALARM  
WAKE-UP TRACK  
SLEEP TIMER  
CD / RADIO OFF  
WAKE-UP TRACK  
SLEEP TIMER  
CD / RADIO OFF  
DAILY ALARM  
RESET  
REPEAT ALARM  
BRIGH T N ESS C O N T RO L  
DAILY ALARM  
RESET  
REPEAT ALARM  
BRIGH T N ESS C O N T RO L  
CD  
RADIO  
TUNING  
FM  
S LEEP  
AL  
2
PM  
TIME  
AL  
1
AL  
2
TIME  
TIME  
BAND  
PRESET  
2
3
4
5
1
6
8
RADIO  
VOLUME  
/
CD  
RADIO  
TIME ALARM  
WAKE-UP TRACK  
SLEEP TIMER  
CD / RADIO OFF  
DAILY ALARM  
RESET  
REPEAT ALARM  
BRIGH T N ESS C O N T RO L  
9
RADIO  
FM  
X
PM  
AL  
2
TIME  
BAND  
TUNING  
PRESET  
2
3
4
5
1
SETTING THE CLOCK AND ALARM TIMES  
English  
CONTROLS/ INSTALLATION  
CD:  
This can be useful when for example you need to be  
CONTROLS (see figure 1)  
MEMORY BACKUP  
woken up at a different time during the week and at the  
weekend.  
- starts / pauses CD playback  
- stops CD playback  
The memory backup conveniently allows your clock,  
alarm and radio presets to be stored for up to 3  
minutes when there is a power interruption e.g. AC  
power failure. The complete CD clock radio and display  
will be switched off. As soon as the power supply  
returns, the display will indicate the correct time.  
1SLEEP TIMER - adjusts timer options for CD / radio  
- switches CD / radio on.  
SETTING THE ALARM TIME  
1. In the standby mode, press ALARM 1 / ALARM 2  
to select the alarm mode. Check the respective  
- skips to the next / previous CD tracks  
/
2CD - starts CD playback  
- fast search within a track  
3RADIO - switches on radio  
Radio:  
4
TIME / ALARM  
CD / RADIO OFF  
icon appears in the display: CD  
buzzer  
Either press briefly:  
radio  
/
TUNING  
/
(up / down)  
If power supply returns after 3 minutes, you will  
need to re-enter the clock and alarm time settings.  
.
-
tunes to radio stations automatically/ manually  
-
-
switches off CD / radio  
selects clock display  
PRESET 1  
BAND  
-
5 - to select / store a radio preset station  
ALARM 1 once for CD alarm  
.
This enables  
- selects waveband (FM/AM).  
CONNECTING HEADPHONES  
5WAKE-UP TRACK - programs your favorite CD  
track for wake-up track alarm.  
CD playback from the first track as your alarm call.  
$
ALARM 1  
- selects CD  
Connect headphones with a 3.5 mm plug into the p jack.  
=The built-in speaker will now be muted on the set.  
ALARM 2 once or more for radio  
/ buzzer  
alarm  
alarm.  
6PUSH TO OPEN - push this corner to open CD door  
- switches CD alarm on/ off  
p - 3.5 mm jack for headphones  
2. Press SET AL 1 or SET AL 2 to activate the alarm  
setting mode.  
=The current alarm time display flashes.  
3. Press HOUR/ MINUTE to adjust the hours and  
minutes respectively.  
7DAILY ALARM RESET - stops the active alarm for  
24 hours  
DISPLAY BRIGHTNESS  
%
^
&
In the dim / medium setting, the backlight is interactive  
and gently fades in and out whenever you press a touch  
screen control.  
Coil antenna  
Power cord  
-
improves FM reception  
8+ / - VOLUME - adjusts the volume  
9REPEAT ALARM/ BRIGHTNESS CONTROL  
There are 3 settings: bright medium dim  
INSTALLATION (see figure 2)  
-
-
-
switches off the alarm for a 9 minute period  
switches off timer function  
changes the brightness of the display window  
With your finger held down on HOUR/ MINUTE,  
the display will increase the hours / minutes  
rapidly and continuously.  
Press HOUR/ MINUTE briefly and repeatedly to  
adjust the time slowly.  
Press REPEAT ALARM/ BRIGHTNESS CONTROL once or more.  
AC Power Supply  
1. Check if the power voltage, shown on the type plate  
on the bottom of the set, corresponds to your  
power supply. If it does not, consult your dealer or  
service center.  
SETTING THE CLOCK TIME (see figure 3)  
0Main display  
The time is displayed using the 12 hour clock where the  
PM indicator lights up (on = PM, off = AM).  
1. In the standby mode, press TIME SET to activate  
the clock setting mode.  
=The current clock time in the main display flashes.  
2. Press HOUR / MINUTE to adjust the hours and  
-
shows clock time and function status  
- shows radio frequency and CD track number  
briefly when respective function is in use  
4. Press SET AL 1 or SET AL 2 again when you  
have reached the correct time.  
=You will hear a double beep to confirm the time setting.  
2. Connect the plug to the wall outlet.  
!Alarm time display - shows the alarm time and the  
chosen alarm activated:  
...PH...IL..IPS scrolls across the display continuously.  
To exit the demo mode, press any button on the  
set.  
Alarm time display  
- CD  
(AL 2 TIME)  
@ALARM 2  
selects radio  
(AL 1 TIME), radio  
/ buzzer  
alarm  
If you have set both alarms, the standby alarm time  
display will show the alarm time which is ready to go  
off first, according to the current clock time.  
E.g. if current clock time = 7:30  
minutes respectively.  
CD / RADIO OFF  
Eg. TIME / ALARM  
With your finger held down on HOUR / MINUTE, the  
display will increase the hours / minutes rapidly and  
continuously.  
Press HOUR / MINUTE briefly and repeatedly to  
adjust the time slowly.  
SLEEP TIMER  
RADIO  
CD  
-
/ buzzer  
AL2 TIME  
= 6:20  
- switches radio / buzzer alarm on/ off  
AL 1 TIME  
= 7:45,  
3. To disconnect the set completely from the power  
supply, withdraw the plug from the wall outlet.  
#Touch Screen Controls  
the standby alarm display shows the alarm time, 7:45.  
Clock controls shown in standby mode. The radio / CD  
controls appear when the radio / CD is switched on.  
SET AL 1 - sets CD alarm time  
HOUR - adjusts hour setting  
TIME SET - sets clock time  
3. Press TIME SET again when you have reached the  
correct time.  
=You will hear a double beep to confirm the time  
setting.  
Standby power consumption (clock mode)....1.5W  
GENTLE WAKE VOLUME  
A sure way of getting up in the mornings, the gentle  
wake volume for the alarm begins from a fixed gentle  
volume (10) and gradually increases to a maximum  
higher setting of ( 25.)  
The serial and production number are located  
on the bottom of the set.  
SETTING THE ALARM (see figure 3)  
MINUTE - adjusts minute setting  
SET AL 2 - sets radio / buzzer alarm  
The default low volume is uo: 10, and the  
GENERAL  
maximum volume is uo: 25.  
Two different alarm times, ALARM 1 and ALARM 2  
During the alarm call, if you press  
+
/
-
VOLUME,  
can be set in the CD  
/ radio  
/ buzzer  
the volume stops automatically getting louder.  
modes.  
ALARM  
CD  
CD / RADIO  
SLEEP TIMER  
DAILY ALARM RESET  
TUNING TO A STATION (see figure 6)  
Helpful Tip :  
In the CD stop position, the CD touch screen  
display remains active for 5 minutes.  
Helpful Tip :  
If you want the alarm to wake you up, FIRST  
CHECK:  
- you have disconnected the headphones.  
radio alarm : make sure you have tuned  
properly to a station.  
If you want the alarm mode to be stopped  
immediately but also wish to retain the same alarm  
setting for the following day:  
Manual tuning:  
1. Press  
/
briefly to find your station. Repeat  
Press and hold DAILY ALARM RESET  
until you have found the desired station.  
Automatic tuning:  
Press  
to start playback again if you have  
-
=You will hear a beep tone to confirm that the alarm  
stopped briefly e.g. to change a CD.  
reset has been activated.  
Press and hold  
/
until the display  
If CD playback is paused for more than 15  
minutes and no controls are pressed, the set  
automatically goes to standby mode.  
frequency starts to change frequency.  
REPEAT ALARM  
This will repeat your alarm call at 9 minute intervals.  
When a station of sufficient strength has been  
found, tuning will stop. Or you can stop the  
automatic tuning search by pressing either  
SELECTING CD WAKE-UP ALARM MODE  
You can program and select a CD track number  
between 1-99, when the set is in the standby or radio  
playback mode.  
However, if the track number programmed does not  
exist on your CD, the CD will start playback from the  
first track during the alarm call.  
1. Set the alarm time for AL1 TIME.  
2. Insert a CD into the CD compartment.  
3. Press ALARM 1 to select CD alarm mode.  
4. Press WAKE-UP TRACK to activate favorite  
track programming.  
During the alarm call, press REPEAT ALARM/  
BRIGHTNESS CONTROL.  
SELECTING A DIFFERENT TRACK DURING PLAYBACK  
The track number appears briefly in the display when  
/
again. Repeat until you have found  
Repeat as often as desired.  
you press  
to skip tracks.  
or  
,
,
= Your alarm mode indication  
will  
the desired station.  
flash throughout the time the repeat alarm is  
active.  
Press  
Press  
Press  
once or more to skip to the next track(s).  
more than once to skip to previous tracks  
once and playback will return to the  
PRESET STATIONS (see figure 6)  
CANCELLING THE ALARM COMPLETELY  
When an alarm is cancelled this is shown by the  
selected alarm indication and symbol disappearing  
from the display.  
Storing preset stations  
You can program up to five radio stations for each band.  
If you like, you can also replace a preset station with  
another frequency. The current station will be indicated  
by a square round the preset number in the display.  
beginning of the current track.  
FINDING A PASSAGE WITHIN A TRACK  
1. During playback, press and hold or  
=The CD is played at high speed and low volume;  
the display will show 'Cd:' and your  
current track number.  
To cancel the set alarm time before it goes off:  
5. Press  
is shown.  
or  
until the desired track number  
Press ALARM 1 or ALARM 2 until the alarm icons  
E.g.  
1
/
/
disappears from the display.  
1. Tune to your desired station (see RADIO  
RECEPTION).  
6. Press WAKE-UP TRACK to confirm the selected  
track number.  
= The display returns to standby clock time.  
7. If you want to review your programmed track  
number, press WAKE-UP TRACK.  
CD PLAYBACK (see figure 5)  
2. As soon as you have found your station, press and  
hold a preset number 1-5. Release the number  
when you hear a double beep confirming that the  
station has now been set.  
1. Insert a CD with the printed side facing up, and  
close the door.  
2. Release  
or  
when you recognize the  
passage you want.  
=Normal CD playback and standby clock time  
2. Press the CD button to start playback.  
resumes.  
IMPORTANT!  
=Display shows: 'Cd: --' and the total number of  
tracks, then your current track number, before  
returning to clock time  
Selecting preset stations  
Select and press a preset number, 1-5.  
The  
buzzer alarm option will automatically  
RADIO RECEPTION (see figure 6)  
replace the CD alarm if you have:  
inserted a CD incorrectly;  
inserted a damaged CD;  
forgotten to insert any CD;  
not closed the CD door properly.  
1. Press the RADIO button to switch on the radio.  
=Radio touch screen controls appears throughout  
radio operation  
=The radio frequency and waveband appears in the  
display for 10 seconds before reverting back to the  
clock display.  
=CD touch screen controls appears throughout CD  
SLEEP TIMER (see figure 7)  
operation.  
About SLEEP TIMER  
Other possible CD indications before return-  
ing to clock time:  
=dooris shown if the CD door is not closed.  
=noCdis shown if no CD has been inserted /  
inserted incorrectly.  
This feature is a built-in timer device which enables  
the set to be automatically switched off during CD /  
radio playback, after a set period of time. There are  
three timer options: 60 , 30 and 15 minutes.  
SWITCHING OFF THE ALARM (see figure 4)  
2. Press the BAND button to select your waveband  
FM/AM.  
There are three ways of switching off the alarm.  
Unless you cancel the alarm completely, the DAILY  
ALARM RESET option will be automatically select-  
ed after 59 minutes, from the time your alarm time  
first sounds.  
Setting SLEEP TIMER  
3. Tune to your station manually or automatically  
=nFCdis shown if the CD-R(W) is non-finalized  
1. Press the SLEEP TIMER button rapidly once or  
more to select your timer options: 60 , 30 and 15  
minutes.  
by using  
(up / down).  
=Errindicates a general error in operation of the set.  
/
3. Adjust the sound with +/- VOLUME.  
To improve reception :  
FM : extend the coil antenna fully at the back of the  
set for optimum reception.  
AM : uses a built-in antenna. Direct the antenna by  
adjusting the position of your set.  
4 To interrupt, press  
=The display will show SL:and the timer options  
Helpful Tip  
During an alarm call/ repeat alarm, only the  
DAILY ALARM RESET, REPEAT ALARM/ BRIGHT-  
NESS CONTROL and ALARM 1 or ALARM 2 and  
briefly.  
CD  
=
flashes.  
=
appears when the timer is active.  
2. To cancel the timer, you can either press:  
5. Press  
again to resume playback.  
4. Adjust the sound using the + / - VOLUME.  
5. To switch off the radio, press the TIME/ALARM  
+
6. Press  
to stop playback. Or press TIME /  
CD / RADIO OFF  
TIME/ALARM  
/ - VOLUME controls on the set will operate.  
CD / RADIO OFF  
ALARM  
standby mode.  
to return to  
CD / RADIO OFF  
button.  
REPEAT ALARM/ BRIGHTNESS CONTROL  
MAINTENANCE  
TROUBLESHOOTING  
If a fault occurs, first check the points listed  
below before taking the set for repair.  
If you are unable to remedy a problem by  
following these hints, consult your dealer or  
service center.  
Continuous crackling/ hiss disturbance during  
AM broadcast  
General (see figure 8)  
If you do not intend to use the set for a long time,  
withdraw the plug from the wall outlet.  
Do not expose the set, to humidity, rain, sand or  
excessive heat caused by heating equipment or  
direct sunlight.  
Electrical interference from TVs, computers,  
fluorescent lamps, etc.  
CAUTION  
Use of controls or adjustments or  
performance of procedures other than  
herein may result in hazardous  
radiation exposure or other unsafe  
operation.  
Move set away from other electrical equipment  
The alarm does not function  
WARNING:  
To clean the set, use a soft, dry cloth. Do not use  
any cleaning agents containing alcohol, ammonia,  
benzene or abrasives as these may harm the  
products surface.  
Do not open the set as there is a risk of electric  
shock! Under no circumstances should you try  
to repair the set yourself, as this will invalidate  
the warranty.  
Alarm mode not selected  
See chapter on SETTING THE ALARM  
Alarm time not set  
See chapter on SETTING THE ALARM.  
CD player and CD handling (see figure 9)  
No sound  
The lens of the CD player should never be touched!  
Sudden changes in the surrounding temperature  
can cause condensation to form and the lens of  
your CD player to cloud over. Playing a CD is then  
not possible. Do not attempt to clean the lens but  
leave the set in a warm environment until the  
moisture evaporates.  
Volume not adjusted  
Environmental information  
Adjust the VOLUME  
Headphones are connected  
Disconnect headphones  
All unnecessary packaging material has been omit-  
ted. We have done our utmost to make the packag-  
ing easily separable into 2 materials: paper pulp,  
polyethylene.  
No reaction to any operation of the bottons  
Your set consists of materials which can be recycled  
if disassembled by a specialized company.  
Please observe local regulations on the disposal of  
packing materials and old equipment.  
Electrostatic discharge  
Always shut the CD door to keep the CD  
compartment dust-free. To clean, dust the  
compartment with a soft dry cloth.  
To clean the CD, wipe in a straight line from the  
center towards the edge using a soft, lint-free  
cloth. Do not use cleaning agents as they may  
damage the disc.  
Disconnect the set from the power supply and  
reconnect the set after 5 minutes.  
CD playback does not work  
CD badly scratched or dirty  
Replace/ clean CD  
Laser lens steamed up  
Wait until lens has adjusted to room temperature  
Laser lens dirty  
Clean lens by playing a CD lens cleaning disc  
CD-R(W) is non-finalized  
Use a finalized CD-R(W)  
Never write on a CD or attach any stickers to it.  
Occasional crackling sound during FM  
broadcast  
Weak signal  
Extend coil antenna fully  

Yamaha CRW2216E User Manual
Vestax CDX 35C User Manual
Toshiba Cell Phone STRATA DK16 User Manual
Sony Dream Machine ICF C50L User Manual
SIIG 04 0589A User Manual
Seagate Cheetah ST3146756SS (FDE) User Manual
Samsung SGH F480 User Manual
Pioneer DEH P5500MP User Manual
Pioneer CD Player DEH P510UB User Manual
Philips Xenium CT9A9RSLV User Manual