Nokia Cell Phone 6267 User Manual

Nokia 6267 User Guide  
9200882  
Issue 2  
This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous  
substances in electrical and electronic equipment.  
Export controls  
This device may contain commodities, technology or software subject to export laws and regulations from  
the US and other countries. Diversion contrary to law is prohibited.  
NO WARRANTY  
The third-party applications provided with your device may have been created and may be owned by  
persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or  
intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility  
for end-user support, functionality of the applications, or the information in the applications or these  
materials. Nokia does not provide any warranty for the third-party applications.BY USING THE  
APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY  
OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU  
FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR  
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE,  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT  
INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.  
9200882/Issue 2  
Contents  
For your safety................................. 6  
General information ........................ 9  
Access codes ...................................................... 9  
Configuration settings service...................... 9  
Software updates........................................... 10  
Download content......................................... 10  
Nokia support ................................................. 11  
1. Get started.................................. 11  
Install the SIM card and battery............... 11  
Insert a microSD card................................... 12  
Remove the microSD card........................... 13  
Charge the battery........................................ 13  
Open and close the phone .......................... 14  
Switch the phone on and off ..................... 14  
Phone strap ..................................................... 14  
Antenna............................................................ 15  
Copy or move contacts................................. 36  
Synchronize all................................................ 36  
Settings............................................................. 37  
Groups............................................................... 37  
Speed dialing................................................... 37  
2. Your phone................................. 15  
Keys and parts ................................................ 15  
Standby mode................................................. 17  
Flight mode ..................................................... 19  
Keypad lock (keyguard)................................ 20  
Functions without a SIM card ................... 20  
3. Call functions............................. 20  
Make a voice call........................................... 20  
Answer or reject a call ................................. 21  
Options during a voice call......................... 22  
Make a video call........................................... 22  
Answer or reject a video call...................... 23  
Options during a video call......................... 23  
Video sharing.................................................. 23  
8. Log.............................................. 38  
9. Settings..................................... 38  
Profiles .............................................................. 38  
Themes .............................................................. 39  
Tones.................................................................. 39  
Main display .................................................... 39  
Mini display ..................................................... 40  
Date and time ................................................. 40  
My shortcuts.................................................... 40  
Connectivity..................................................... 41  
Call ..................................................................... 45  
Phone................................................................. 46  
Configuration.................................................. 47  
Security............................................................. 47  
Digital rights management ......................... 48  
4. Write text................................... 24  
Traditional text input ................................... 24  
Predictive text input..................................... 25  
5. Navigate the menus................... 25  
6. Messaging................................... 26  
Message............................................................ 26  
4
   
Phone software updates.............................. 49  
Restore factory settings............................... 49  
Download an application............................. 66  
10.Operator menu.......................... 49  
11.Gallery ....................................... 50  
Print images .................................................... 50  
Memory card................................................... 50  
Download settings......................................... 70  
Service inbox................................................... 70  
Cache memory ................................................ 71  
Browser security............................................. 71  
12.Media......................................... 51  
Camera.............................................................. 51  
Video.................................................................. 52  
Music player.................................................... 53  
Radio ................................................................. 54  
Voice recorder................................................. 56  
Equalizer........................................................... 56  
13.Organizer................................... 56  
Alarm clock...................................................... 56  
Calendar........................................................... 57  
To-do list.......................................................... 58  
Notes................................................................. 58  
Calculator......................................................... 58  
Countdown timer........................................... 59  
Stopwatch........................................................ 59  
18.PC connectivity......................... 73  
Nokia PC Suite ................................................ 73  
Packet data, HSCSD, and CSD .................... 73  
Bluetooth.......................................................... 73  
Data communication applications............ 73  
14.Push to talk............................... 60  
PTT channels.................................................... 60  
Switch PTT on and off .................................. 61  
Make and receive a PTT call ....................... 61  
Callback requests........................................... 63  
Add a one-to-one contact.......................... 64  
PTT settings ..................................................... 64  
Configuration settings ................................. 65  
Web.................................................................... 65  
19.Battery information................. 74  
Charging and discharging............................ 74  
Nokia battery authentication..................... 75  
Care and maintenance................... 77  
Additional safety information...... 79  
Index............................................... 83  
5
For your safety  
Read these simple guidelines. Not following them may be dangerous or illegal. Read the  
complete user guide for further information.  
SWITCH ON SAFELY  
Do not switch the device on when wireless phone use is prohibited or when it  
may cause interference or danger.  
ROAD SAFETY COMES FIRST  
Obey all local laws. Always keep your hands free to operate the vehicle while  
driving. Your first consideration while driving should be road safety.  
INTERFERENCE  
All wireless devices may be susceptible to interference, which could affect  
performance.  
SWITCH OFF IN HOSPITALS  
Follow any restrictions. Switch the device off near medical equipment.  
SWITCH OFF IN AIRCRAFT  
Follow any restrictions. Wireless devices can cause interference in aircraft.  
SWITCH OFF WHEN REFUELING  
Do not use the device at a refueling point. Do not use near fuel or chemicals.  
SWITCH OFF NEAR BLASTING  
Follow any restrictions. Do not use the device where blasting is in progress.  
USE SENSIBLY  
Use only in the normal position as explained in the product documentation. Do  
not touch the antenna unnecessarily.  
QUALIFIED SERVICE  
Only qualified personnel may install or repair this product.  
ENHANCEMENTS AND BATTERIES  
Use only approved enhancements and batteries. Do not connect incompatible  
products.  
WATER-RESISTANCE  
Your device is not water-resistant. Keep it dry.  
6
 
BACK-UP COPIES  
Remember to make back-up copies or keep a written record of all important  
information stored in your device.  
CONNECTING TO OTHER DEVICES  
When connecting to any other device, read its user guide for detailed safety  
instructions. Do not connect incompatible products.  
EMERGENCY CALLS  
Ensure the phone function of the device is switched on and in service. Press the  
end key as many times as needed to clear the display and return to the standby  
mode. Enter the emergency number, then press the call key. Give your location.  
Do not end the call until given permission to do so.  
I About your device  
The wireless device described in this guide is approved for use on the WCDMA 850 and 2100,  
EGSM 850 and 900, and GSM 1800 and 1900 network. Contact your service provider for  
more information about networks.  
When using the features in this device, obey all laws and respect local customs, privacy and  
legitimate rights of others, including copyrights.  
Copyright protections may prevent some images, music (including ringing tones), and other  
content from being copied, modified, transferred, or forwarded.  
Warning: To use any features in this device, other than the alarm clock, the device  
must be switched on. Do not switch the device on when wireless device use may  
cause interference or danger.  
I Network services  
To use the phone you must have service from a wireless service provider. Many of the  
features require special network features. These features are not available on all networks;  
other networks may require that you make specific arrangements with your service provider  
before you can use the network services. Your service provider can give you instructions and  
explain what charges will apply. Some networks may have limitations that affect how you  
can use network services. For instance, some networks may not support all language-  
dependent characters and services.  
Your service provider may have requested that certain features be disabled or not activated  
in your device. If so, these features will not appear on your device menu. Your device may  
also have a special configuration such as changes in menu names, menu order, and icons.  
Contact your service provider for more information.  
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some  
features of this device, such as multimedia messaging (MMS), browsing, e-mail application,  
7
instant messaging, presence enhanced contacts, remote synchronization, and content  
downloading using the browser or MMS, require network support for these technologies.  
I Shared memory  
The following features in this device may share memory: gallery, contacts, text messages,  
multimedia messages, and instant messaging, e-mail, calendar, to-do notes, Java™ games  
and application, and note application. Use of one or more of these features may reduce the  
memory available for the remaining features sharing memory. Your device may display a  
message that the memory is full when you try to use a shared memory feature. In this case,  
delete some of the information or entries stored in the shared memory features before  
continuing.  
I Enhancements  
A few practical rules about accessories and enhancements:  
Keep all accessories and enhancements out of the reach of small children.  
When you disconnect the power cord of any accessory or enhancement, grasp and pull  
the plug, not the cord.  
Check regularly that enhancements installed in a vehicle are mounted and are operating  
properly.  
Installation of any complex car enhancements must be made by qualified personnel only.  
8
 
General information  
I Access codes  
Security code  
The security code (5 to 10 digits) helps to protect your phone against  
unauthorized use. The preset code is 12345. To change the code, and to set the  
phone to request the code, see “Security,” p. 47.  
PIN codes  
The personal identification number (PIN) code and the universal personal  
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card  
against unauthorized use. See “Security,” p. 47.  
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for  
some functions.  
The module PIN is required to access the information in the security module. See  
“Security module,” p. 71.  
The signing PIN is required for the digital signature. See “Digital signature,” p. 72.  
PUK codes  
The personal unblocking key (PUK) code and the universal personal unblocking key  
(UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code,  
respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. If  
the codes are not supplied with the SIM card, contact your local service provider  
for the codes.  
Barring password  
The barring password (4 digits) is required when using the call barring service. See  
“Security,” p. 47.  
I Configuration settings service  
To use some of the network services, such as mobile internet services, MMS, Nokia  
Xpress audio messaging, or remote internet server synchronization, your phone  
needs the correct configuration settings. For more information on availability,  
9
             
contact your network operator, service provider, nearest authorized Nokia dealer,  
When you have received the settings as a configuration message, and the settings  
are not automatically saved and activated, Configuration settings received is  
displayed.  
To save the settings, select Show > Save. If required, enter the PIN code supplied  
by the service provider.  
To discard the received settings, select Exit or Show > Discard.  
I Software updates  
Nokia may produce software updates that may offer new features, enhanced  
functions, or improved performance. You may be able to request these updates  
through the Nokia Software Updater PC application. To update the device  
software, you need the Nokia Software Updater application and a compatible PC  
with Microsoft Windows 2000 or XP operating system, broadband internet access,  
and a compatible data cable to connect your device to the PC.  
To get more information and to download the Nokia Software Updater  
If software updates over the air are supported by your network, you may also be  
able to request updates through the device. See “Phone,” p. 46, Phone updates.  
Downloading software updates may involve the transmission of large amounts of  
data through your service provider’s network. Contact your service provider for  
information about data transmission charges.  
Make sure that the device battery has enough power, or connect the charger  
before starting the update.  
Important: Use only services that you trust and that offer adequate security and  
protection against harmful software.  
I Download content  
You may be able to download new content (for example, themes) to the phone  
(network service).  
For the availability of different services, pricing, and tariffs, contact your service  
provider.  
Important: Use only services that you trust and that offer adequate  
security and protection against harmful software.  
10  
   
I Nokia support  
guide, additional information, downloads, and services related to your Nokia product.  
On the website, you can get information on the use of Nokia products and  
services. If you need to contact customer service, check the list of local Nokia  
For maintenance services, check your nearest Nokia service center at  
1. Get started  
I Install the SIM card and battery  
Always switch the device off and disconnect the charger before removing the  
battery.  
For availability and information on using SIM card services, contact your SIM card vendor.  
This may be the service provider or other vendor.  
This device is intended for use with a BL-5C battery. Always use original Nokia  
batteries. See “Nokia battery authentication,” p. 75.  
The SIM card and its contacts can easily be damaged by scratches or bending, so  
be careful when handling, inserting, or removing the card.  
1. With the back of the phone facing you, slide the back  
cover to remove it from the phone.  
2. To remove the battery, lift it as shown.  
11  
     
3. Insert the SIM card into the SIM card holder. Make sure that the SIM card is  
properly inserted and that the golden contact area on the card is facing  
downwards.  
4. Replace the battery.  
5. Slide the back cover into place.  
I Insert a microSD card  
1. Open the memory card holder as shown.  
2. Insert the card into the microSD card  
slot with the gold-colored contact area  
on the card facing upwards, and press it  
until it clicks into place.  
3. Close the memory card holder.  
Memory card is not included in sales pack.  
12  
 
Important: Do not remove the memory card in the middle of an operation when  
the card is being accessed. Removing the card in the middle of an operation may  
damage the memory card as well as the device, and data stored on the card may  
be corrupted.  
I Remove the microSD card  
You can remove or replace the microSD card during phone operation without  
switching the phone off.  
1. Make sure that no application is currently accessing the micro SD memory  
card.  
2. Open the memory card holder.  
3. Press the microSD card slightly in to release the locking.  
4. Remove the microSD card from the slot.  
I Charge the battery  
Check the model number of any charger before use with this device. This device is intended  
for use when supplied with power from an AC-3, AC-4, AC-5 or CA-70 charger.  
Warning: Use only batteries, chargers, and enhancements approved by Nokia for  
use with this particular model. The use of any other types may invalidate any  
approval or warranty, and may be dangerous.  
For availability of approved enhancements, please check with your dealer. When  
you disconnect the power cord of any enhancement, grasp and pull the plug, not  
the cord.  
1. Connect the charger to a wall socket.  
2. Connect the lead from the charger to the charger  
connector as shown.  
A CA-44 charger adapter can be used with older  
charger models.  
If the battery is completely discharged, it may take a  
few minutes before the charging indicator appears  
on the display or before any calls can be made.  
13  
   
The charging time depends on the charger used. Charging a BL-5C battery with  
the AC-4 charger takes approximately  
1 hour and 30 minutes while the phone is in the standby mode.  
You open and close the phone manually. When you open the fold of the phone, it  
opens up to approximately 165 degrees. Do not try to force the fold open more.  
Depending on the theme, a tone sounds when you open and close the phone.  
I Switch the phone on and off  
Press and hold the end key until the phone turns on or  
off.  
If the phone asks for a PIN or a UPIN code, enter the  
code (displayed as ****), and select OK.  
Set the time, time zone, and date  
Enter the local time, select the time zone of your location in terms of the time  
difference with respect to Greenwich Mean Time (GMT), and enter the date. See  
“Date and time,” p. 40.  
Plug and play service  
When you switch on your phone for the first time, and the phone is in the standby  
mode, you are asked to get the configuration settings from your service provider  
(network service). Confirm or decline the query. See “Configuration settings  
service,” p. 9.  
I Phone strap  
Remove the back cover of the phone. Insert a strap as  
shown in the picture. Replace the back cover.  
14  
     
I Antenna  
Your device has an internal antenna.  
Note: As with any radio transmitting device, avoid touching an  
antenna unnecessarily when the antenna is in use. For example,  
avoid touching the cellular antenna during a phone call. Contact  
with a transmitting or receiving antenna affects the quality of the  
radio communication, may cause the device to operate at a higher  
power level than otherwise needed, and may reduce the battery life.  
2. Your phone  
I Keys and parts  
1 Earpiece  
2 CIF camera  
3 Main display  
4 Left and right selection keys  
5 NaviTM scroll key;  
herein referred to as scroll key  
6 Middle selection key  
7 Call key  
8 End key;  
ends calls (short key press) and  
turns phone on and off (long key press)  
9 Keypad  
10 Close bumper  
15  
     
11 Mini display  
12 Music key;  
rewinds current track (press and hold) or skips to  
previous track (short key press)  
13 Music key play/pause  
14 Loudspeaker  
15 Music key;  
fast forwards current track (press and hold) or skip to  
next track (short key press)  
16 Camera key  
17 Volume down key  
18 Volume up key/PTT key  
19 Camera flash  
20 2-megapixel camera  
21 Headset connector  
22 USB port  
23 Charger connector  
24 Memory card slot  
Warning: The scroll key and the middle selection key (6) in this device may  
contain nickel. The scroll key and the middle selection key are not designed for  
prolonged contact with the skin. Continuous exposure to nickel on the skin may  
lead to a nickel allergy.  
16  
I Standby mode  
When the phone is ready for use, and you have not entered any characters, the  
phone is in the standby mode.  
Mini display  
1 Network mode indicator  
2 Signal strength of the cellular network  
3 Battery charge status  
4 Indicators  
5 Network name or the operator logo  
6 Clock and date  
Main display  
1 Network mode indicator  
2 Signal strength of the cellular network  
3 Battery charge status  
4 Indicators  
5 Network name or the operator logo  
6 Clock  
7 Main display  
8 Left selection key;  
Go to or a shortcut to another function. See “Left selection key,” p. 40.  
9 Middle selection key; Menu.  
10 Right selection key;  
Names or a shortcut to a function that you selected. See “Right selection key,”  
p. 41.  
Active standby mode  
To enable or disable the active standby mode, select Menu > Settings > Main  
display > Active standby > Active standby mode > On or Off.  
17  
 
To access active standby applications, first scroll up, and then scroll to the  
application, and select Select or View. To select an application or event, scroll to it  
and press the scroll key.  
To end the active standby navigation mode select Exit.  
To switch the active standby mode off, select Options > Active standby sett. >  
Active standby mode > Off.  
To organize and change the active standby mode,  
activate the navigation mode, and select Options > Personalise view or Active  
standby sett..  
Indicators  
You have unread messages.  
You have unsent, canceled, or failed messages.  
The phone registered a missed call.  
,
Your phone is connected to the instant messaging service, and the  
availability status is online or offline.  
You received one or several instant messages.  
The keypad is locked.  
The phone does not ring for an incoming call or text message.  
The alarm clock is activated.  
The countdown timer is running.  
The stopwatch is running.  
,
The phone is registered to the GPRS or EGPRS network.  
A GPRS or EGPRS connection is established.  
The GPRS or EGPRS connection is suspended (on hold).  
A Bluetooth connection is active.  
,
,
,
A push to talk connection is active or suspended.  
18  
If you have two phone lines, the second phone line is selected.  
All incoming calls are diverted to another number.  
The loudspeaker is activated, or the music stand is connected to the  
phone.  
Calls are limited to a closed user group.  
The timed profile is selected.  
,
,
, or  
A headset, handsfree, loopset, or music stand enhancement is connected  
to the phone.  
I Flight mode  
You can deactivate all radio frequency functions and still have access to offline  
games, the calendar, and phone numbers. Use the flight mode in radio sensitive  
environments—on board aircraft or in hospitals. When the flight mode is active,  
is shown.  
Select Menu > Settings > Profiles > Flight > Activate or Personalise.  
To deactivate the flight mode, select any other profile.  
In the flight mode you can make an emergency call. Enter the emergency number,  
press the call key, and select Yes when asked Exit flight profile? The phone  
attempts to make an emergency call.  
When the emergency call ends, the phone automatically changes to the general  
profile mode.  
Warning: With the flight profile you cannot make or receive any calls, including  
emergency calls, or use other features that require network coverage. To make  
calls, you must first activate the phone function by changing profiles. If the device  
has been locked, enter the lock code. If you need to make an emergency call while  
the device is locked and in the flight profile, you may be also able to enter an  
official emergency number programmed in your device in the lock code field and  
select 'Call'. The device will confirm that you are about to exit flight profile to start  
an emergency call.  
19  
 
I Keypad lock (keyguard)  
Select Menu or Unlock and press * within 1.5 seconds to lock or unlock the  
keypad.  
If the security keyguard is activated, enter the security code if requested.  
To answer a call when the keyguard is on, press the call key or open the phone.  
When you end or reject the call, the keypad automatically locks.  
For Security keyguard, see “Phone,” p. 46.  
When the keyguard is on, calls may be possible to the official emergency number  
programmed into your device.  
I Functions without a SIM card  
Several functions of your phone may be used without installing a SIM card (for  
example, data transfer with a compatible PC or other compatible device). Some  
functions appear dimmed in the menus and cannot be used.  
3. Call functions  
I Make a voice call  
1. Enter the phone number, including the area code.  
For international calls, press * twice for the international prefix (the +  
character replaces the international access code), enter the country code, the  
area code without the leading 0, if necessary, and the phone number.  
2. To call the number, press the call key.  
To increase or decrease the volume during a call, press the volume keys.  
3. To end the call or to cancel the call attempt, press the end key, or close the  
phone.  
To search for a name or phone number that you saved in Contacts, see “Search for  
a contact,” p. 35. Press the call key to call the number.  
To access the list of dialed numbers, press the call key once in the standby mode.  
To call a number, select a number or name, and press the call key.  
20  
       
Speed dialing  
Assign a phone number to one of the speed-dialing keys, 3 to 9. See “Speed  
dialing,” p. 37. Call the number in either of the following ways:  
• Press a speed-dialing key, then the call key.  
begins. See Speed dialling in “Call,” p. 45.  
Enhanced voice dialing  
You can make a phone call by saying the name that is saved in the contact list of  
the phone. Voice commands are language-dependent. To set the language, see  
Recognition lang. in “Phone,” p. 46.  
Note: Using voice tags may be difficult in a noisy environment or during an  
emergency, so you should not rely solely upon voice dialing in all circumstances.  
1. In the standby mode, press and hold the right selection key or press and hold  
the volume down key. A short tone is played, and Speak now is displayed.  
2. Say the voice command clearly. If the voice recognition was successful, a list  
with matches is shown. The phone plays the voice command of the match on  
the top of the list. If the result is not the correct one, scroll to another entry.  
Using voice commands to carry out a selected phone function is similar to  
voice dialing. See Voice commands in “My shortcuts,” p. 41.  
I Answer or reject a call  
To answer an incoming call, press the call key, or open the phone.  
To end the call, press the end key or close the phone.  
To reject an incoming call, press the end key or close the phone.  
To reject an incoming call when the phone is closed, press and hold a volume key.  
To mute the ringing tone, press a volume key when the phone is closed, or select  
Silence when the phone is open.  
When receiving a call with the phone open, select Options > Loudspeaker,  
Answer, or Reject  
Call waiting  
To answer the waiting call during an active call, press the call key. The first call is  
put on hold. To end the active call, press the end key.  
21  
 
To activate the Call waiting function, see “Call,” p. 45.  
I Options during a voice call  
Many of the options that you can use during a call are network services. For  
availability, contact your service provider.  
During a call, select Options and from the following:  
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record or  
Loudspeaker.  
Network services options are Answer or Reject, Hold or Unhold, New call, Add to  
conference, End call, End all calls, and the following:  
Send DTMF — to send tone strings  
Swap — to switch between the active call and the call on hold  
Transfer — to connect a call on hold to an active call and disconnect yourself  
Conference — to make a conference call  
Private call —to discuss privately in a conference call  
Warning: Do not hold the device near your ear when the loudspeaker is in use,  
because the volume may be extremely loud.  
I Make a video call  
During operation, for example, during an active video call or highspeed data  
connection, this device may at times feel warm. In most cases, this is normal, not a  
fault. If you suspect the device is not working properly, take it to the nearest  
authorized service facility for service.  
When you make a video call, you send a real-time video to the recipient of the call.  
The video image captured by the VGA camera above the main display, is shown to  
the video call recipient.  
To be able to make a video call, you must have a USIM card and be connected in a  
WCDMA network. For availability of and subscription to video call services,  
contact your network operator or service provider. A video call can only be made  
between two parties. The video call can be made to a compatible phone or an  
ISDN client. Video calls cannot be made while another voice, video, or data call is  
active.  
1. To start a video call, enter the phone number in the standby mode, or select  
Contacts and a contact.  
22  
   
2. Press and hold the call key, or select Options > Video call.  
Starting a video call may take a while. Video call and an animation are shown.  
If the call is not successful (for example, video calls are not supported by the  
network or the receiving device is not compatible) you are asked if you want to  
try a normal call or send a message instead.  
Tip: To increase or decrease the volume during a call, press the volume  
keys.  
The video call is active when you can see two video images and hear the sound  
through the loudspeaker. If the call recipient denies the video sending, you  
may see a still image or a grey background graphic. You will hear the sound.  
3. To end the call, press the end key.  
I Answer or reject a video call  
When a video call arrives, Video Call is displayed.  
1. Press the call key to answer the video call.  
If you select Yes, the image being captured by the camera in your phone is  
shown to the caller. If you select No, or do nothing, video sending is not  
activated, and you hear a sound. A graphic is displayed, indicating that the  
video is not sent. You can enable or disable video sending at any time during  
the video call.  
2. To end the video call, press the end key.  
Even when you deny video sending during a video call, the call is still charged as a  
video call. Check the pricing with your network operator or service provider.  
I Options during a video call  
During a video call, select Options and from the available options.  
I Video sharing  
During voice call, you can share your live camera view with the call recipient. To  
share a video, the recipient must have a compatible mobile device and a SIP  
address in your contacts list. If the recipient’s SIP address is missing, enter it.  
Select Options > Video sharing. The phone sends an invitation, and Sending  
invitat. to is displayed. If the recipient accepts, Start sharing video? is displayed.  
Select Yes, and the phone starts sending the video. Audio is routed to the  
loudspeaker.  
23  
     
To pause video sharing, select Pause. The middle selection key changes to  
Continue.  
To resume the video sharing select Continue. The middle selection key changes to  
Pause.  
To end a video sharing session, select Stop. Video sharing ended is shown to both  
participants.  
To check availability and costs, and to subscribe to the service, contact your  
network operator or service provider.  
4. Write text  
You can enter text (for example, when writing messages) using traditional or  
predictive text input. When you write text, select and hold Options to switch  
between traditional text input, indicated by  
indicated by . Not all languages are supported by predictive text input.  
The character cases are indicated by , and . To change the character  
case, press #. To change from the letter to number mode, indicated by , press  
, and predictive text input,  
,
and hold #, and select Number mode. To change from the number to the letter  
mode, press and hold #.  
To set the writing language, select Options > Writing language.  
I Traditional text input  
Press a number key, 1 to 9, repeatedly until the desired character appears. The  
characters available depend on the selected writing language. If the next letter  
you want is located on the same key as the present one, wait until the cursor  
appears, and enter the letter. The most common punctuation marks and special  
characters are available under the 1 key.  
24  
   
I Predictive text input  
Predictive text input is based on a built-in dictionary to which you can add new  
words.  
1. Start writing a word using the keys, 2 to 9. Press each key only once for one  
letter. The phone displays * or the letter if it separately has a meaning as a  
word. The entered letters are displayed underlined.  
2. When you finish writing the word and it is correct, to confirm it, press 0 to add  
a space.  
If the word is not correct, press * repeatedly, and select the word from the list.  
If the ? character is displayed after the word, the word you intended to write is  
not in the dictionary. To add the word to the dictionary, select Spell. Enter the  
word using traditional text input, and select Save.  
To write compound words, enter the first part of the word, and scroll right to  
confirm it. Write the last part of the word, and confirm the word.  
3. Start writing the next word.  
5. Navigate the menus  
The phone offers you an extensive range of functions, which are grouped into  
menus.  
1. To access the menu, select Menu.  
To change the menu view, select Options > Main menu view > List, Grid, Grid  
with labels, or Tab.  
To rearrange the menu, select Options > Organise. Scroll to the menu you  
want to move, and select Move. Scroll to where you want to move the menu,  
and select OK. To save the change, select Done > Yes.  
2. Scroll through the menu, and select an option (for example, Settings).  
3. If the selected menu contains further submenus, select the one that you want  
(for example, Call).  
4. If the selected menu contains further submenus, repeat step 3.  
5. Select the setting of your choice.  
6. To return to the previous menu level, select Back. To exit the menu, select Exit.  
25  
   
6. Messaging  
You can read, write, send, and save text messages, multimedia  
messages, e-mail messages, audio messages and flash messages. All messages are  
organized into folders.  
I Message  
Creating a message  
Creating a new message is by default a text message but changes automatically  
into multimedia message when files are added.  
Text messages (SMS)  
With the short message service (SMS) you can send and receive text messages,  
and receive messages that can contain pictures (network service).  
Before you can send any text or SMS e-mail messages, you must save your  
message center number. See “Message settings,” p. 32.  
To check SMS e-mail service availability and to subscribe to the service, contact  
your service provider. To save an e-mail address in Contacts, see “Save details,”  
p. 35.  
Your device supports the sending of text messages beyond the character limit for a single  
message. Longer messages are sent as a series of two or more messages. Your service  
provider may charge accordingly. Characters that use accents or other marks, and characters  
from some language options, take up more space, limiting the number of characters that can  
be sent in a single message.  
An indicator at the top of the display shows the total number of characters left  
and the number of messages needed for sending. For example, 673/2 means that  
there are 673 characters left and that the message will be sent as a series of two  
messages.  
Write and send a text message  
1. Select Menu > Messaging > Create message > Message.  
2. Enter one or more phone numbers in the To: field. To retrieve a phone number  
from a memory, select Add.  
26  
   
3. Write your message in the Text: field.  
To use a text template, scroll down and select Insert.  
4. To send the message, select Send, or press the call key.  
Read and reply to a text message  
1. To view a received message, select Show. To view it later, select Exit.  
To read the message later, select Menu > Messaging > Inbox.  
2. To reply to a message, select Reply. Write the reply message.  
To add a file scroll down, and select Insert.  
3. To send the message, select Send, or press the call key.  
Multimedia messages (MMS)  
Only devices that have compatible features can receive and display multimedia messages.  
The appearance of a message may vary depending on the receiving device.  
A multimedia message can contain some attachments.  
To check availability and to subscribe to the multimedia messaging service (MMS,  
network service), contact your service provider.  
Write and send a multimedia message  
The wireless network may limit the size of MMS messages. If the inserted picture exceeds  
this limit, the device may make it smaller so that it can be sent by MMS.  
1. Select Menu > Messaging > Create message > Message.  
2. Enter one or more phone numbers or e-mail addresses in the To: field. To  
retrieve a phone number or e-mail address from a memory, select Add.  
3. Write your message. To add a file, scroll down and select Insert.  
4. To view the message before sending it, select Options > Preview.  
5. To send the message, select Send, or press the call key.  
Message sending  
Copyright protections may prevent some images, music (including ringing tones), and other  
content from being copied, modified, transferred, or forwarded.  
To send the message, select Send. The phone saves the message in the Outbox  
folder, and the sending starts.  
27  
Note: Your device may indicate that your message was sent to the message center  
number programmed into your device. Your device may not indicate whether the  
message is received at the intended destination. For more details about messaging  
services, contact your service provider.  
If an interruption occurs while the message is being sent, the phone tries to resend  
the message a few times. If these attempts fail, the message remains in the  
Outbox folder. To cancel the sending of the messagesOutbox, scroll to the desired  
message, and select Options > Cancel sending.  
Read and reply to a multimedia message  
Important: Exercise caution when opening messages. Multimedia message  
objects may contain malicious software or otherwise be harmful to your device or  
PC.  
1. To view a received message, select Show. To view it later, select Exit.  
To view the message later, select Menu > Messaging > Inbox.  
2. To view the whole message if the received message contains a presentation,  
select Play.  
To view the files in the presentation or the attachments, select Options >  
Objects or Attachments.  
3. To reply to a message, select Reply. Write the reply message.  
To add a file in the reply, scroll down and select Insert.  
4. To send the message, select Send, or press the call key.  
I Flash messages  
Flash messages are text messages that are instantly displayed upon receipt. Flash  
messages are not automatically saved.  
Write a message  
Select Menu > Messaging > Create message > Flash message. Enter the  
recipient’s phone number, and write your message.  
Receive a message  
A received flash message is indicated with Message: and a few words from the  
beginning of the message. To read the message, select Read. To extract numbers  
and addresses from the current message, select Options > Use detail. To save the  
message, select Save and the folder in which you want to save it.  
28  
 
I Nokia Xpress audio messaging  
You can use the multimedia message service to create and send an audio message  
in a convenient way. MMS must be activated before you can use audio messages.  
Create a message  
1. Select Menu > Messaging > Create message > Audio message. The recorder  
opens. To use the recorder, see “Voice recorder,” p. 56.  
2. Speak your message.  
3. Enter one or more phone numbers in the To: field, or select Add to retrieve a  
number.  
4. To send the message, select Send, or press the call key.  
Listen to a message  
To open a received audio message, select Play. If more than one message is  
received, select Show > Play. To listen to the message later, select Exit.  
I Memory full  
When you receive a message, and the memory for the messages is full, Memory  
full. Unable to receive messages. is shown. To first delete old messages, select  
OK > Yes and the folder. Scroll to the desired message, and select Delete. To delete  
multiple messages, select Mark. Mark all the messages you want to delete, and  
select Options > Delete marked.  
I Folders  
The phone saves received messages in the Inbox folder.  
Messages that have not yet been sent are saved in the Outbox folder.  
To set the phone to save the sent messages in the Sent items folder, see Save sent  
messages in “General settings,” p. 32.  
To edit and send messages that you have written and saved in the Drafts folder,  
select Menu > Messaging > Drafts.  
You can move your messages to the Saved items folder. To organize your Saved  
items subfolders, select Menu > Messaging > Saved items. To add a folder, select  
Options > Add folder. To delete or rename a folder, scroll to the desired folder, and  
select Options > Delete folder or Rename folder.  
29  
     
Your phone has templates. To access the template list, select Menu >  
Messaging > Create message > Templates. To create a new template, write a  
message, and select Options > Save message > Save as template.  
I E-mail application  
The e-mail application uses a packet data connection (network service) to allow  
you to access your e-mail account. This e-mail application is different from the  
SMS e-mail function. To use the e-mail function on your phone, you need a  
compatible e-mail system.  
You can write, send, and read e-mail with your phone. Your phone supports POP3  
and IMAP4 e-mail servers. This application does not support keypad tones.  
Before you can send and retrieve any e-mail messages, you must obtain a new e-  
mail account or use your current account. To check the availability of your e-mail  
account, contact your e-mail service provider.  
Check your e-mail settings with your e-mail service provider. You may receive the  
e-mail configuration settings as a configuration message. See “Configuration  
settings service,” p. 9.  
To activate the e-mail settings, select Menu > Messaging > Message settings >  
E-mail messages. See “E-mail messages,” p. 34.  
E-mail setup wizard  
The e-mail setup wizard starts automatically if no e-mail settings are defined in  
the phone, or to start the wizard, select Menu > Messaging > E-mail mailbox >  
Options > Add mailbox >E-mail setup wizard.  
To enter the settings manually, select Menu > Messaging > E-mail mailbox >  
Options > Add mailbox > Create manually.  
The e-mail application requires an internet access point without a proxy. WAP  
access points normally include a proxy and do not work with the e-mail  
application.  
Write and send an e-mail  
You can write your e-mail message before connecting to the e-mail service; or  
connect to the service first, then write and send your e-mail.  
1. Select Menu > Messaging > Create message > E-mail message.  
30  
 
2. Enter the recipient’s e-mail address, write the subject, and enter the message.  
To attach a file, select the Insert button and from the options.  
3. To send the e-mail message, select Send.  
If more than one e-mail account is defined, select the account from which you  
want to send the e-mail.  
To save your e-mail, select Options > Save message. To edit or continue  
writing your e-mail later, select As draft message.  
To send an e-mail from a draft folder, select Menu > Messaging > Drafts and  
the desired message.  
Download e-mail  
1. To download e-mail messages that have been sent to your e-mail account,  
select Menu > Messaging.  
If more than one e-mail account is defined, select the account from which you  
want to download the e-mail.  
The e-mail application only downloads e-mail headers at first.  
2. Select an e-mail and press Open to download the complete e-mail message.  
Read and reply to e-mail  
Important: Exercise caution when opening messages. E-mail messages may  
contain malicious software or otherwise be harmful to your device or PC.  
1. Select Menu > Messaging the account name, and the desired message.  
2. To reply to an e-mail, select Options > Reply. Confirm or edit the e-mail  
address and subject, then write your reply.  
3. To send the message, select Send.  
To terminate the connection to your e-mailbox select, Options > Disconnect.  
I Instant messaging  
With instant messaging (IM, network service) you can send short, simple text  
messages to online users. You have to subscribe to a service and register with the  
IM service you want to use. For more information about signing up for IM services,  
contact your service provider.  
Note: Depending on your IM service, you may not have access to all of the  
features described in this guide.  
31  
 
I Voice messages  
The voice mailbox is a network service and you may need to subscribe to it. For  
more information contact your service provider.  
To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to  
voice msgs.. To enter, search for, or edit your voice mailbox number, select Voice  
mailbox no..  
If supported by the network,  
indicates new voice messages. To call your voice  
mailbox number, select Listen.  
I Info messages  
You can receive messages on various topics from your service provider (network  
service). For more information, contact your service provider. Select Menu >  
Messaging > Info messages and from the available options.  
I Service commands  
Write and send service requests (USSD commands) to your service provider, such  
as activation commands for network services. Select Menu > Messaging > Serv.  
commands.  
I Delete messages  
To delete messages, select Menu > Messaging > Delete messages > By message  
to delete single messages, By folder to delete all messages from a folder, or All  
messages.  
I SIM messages  
SIM messages are specific text messages that are saved to your SIM card. You can  
copy or move those messages to the phone memory, but not vice versa. To read  
SIM messages, select Menu > Messaging > Options > SIM messages.  
I Message settings  
General settings  
General settings are common for text and multimedia messages.  
32  
           
Select Menu > Messaging > Message settings > General settings and from the  
following options:  
Save sent messages > Yes — to set the phone to save the sent messages in the  
Sent items folder  
Overwriting in Sent > Allowed — to set the phone to overwrite the old sent  
messages with the new ones when the message memory is full. This setting is  
shown only if you select Save sent messages > Yes.  
Font size — to select the font size used in messages  
Favourite recipient — to define easily available message recipients or groups when  
sending messages  
Graphical smileys > Yes — to set the phone to replace character-based smileys  
with graphical ones  
Text messages  
The text message settings affect the sending, receiving, and viewing of text and  
SMS e-mail messages.  
Select Menu > Messaging > Message settings > Text messages and from the  
following options:  
Delivery reports > Yes — to ask the network to send delivery reports about your  
messages (network service)  
Message centres > Add centre — to set the phone number and name of the  
message center that is required for sending text messages. You will receive this  
number from your service provider.  
Msg. centre in use — to select the message center in use  
Message validity — to select the length of time for which the network attempts to  
deliver your message  
Messages sent via — to select the format of the messages to be sent: Text, Paging,  
or Fax (network service)  
Use packet data > Yes — to set GPRS as the preferred SMS bearer  
Character support > Full — to select all characters in the messages to be sent as  
viewed. If you select Reduced, characters with accents and other marks may be  
converted to other characters.  
Rep. via same centre > Yes — to allow the recipient of your message to send you a  
reply using your message center (network service)  
33  
Multimedia messages  
The message settings affect the sending, receiving, and viewing of multimedia  
messages. You may receive the configuration settings for multimedia messaging  
as a configuration message. See “Configuration settings service,” p. 9. You can  
also enter the settings manually. See “Configuration,” p. 47.  
Select Menu > Messaging > Message settings > Multimedia messages and from  
the following options:  
Delivery reports > Yes — to ask the network to send delivery reports about your  
messages (network service)  
MMS creation mode — to restrict or allow various types of multimedia to be added  
to messages  
Image size in MMS — to set the image size in multimedia messages  
Default slide timing — to define the default time between slides in multimedia  
messages  
Allow MMS receptn. — to receive or block the multimedia message, select Yes or  
No. If you select In home network, you cannot receive multimedia messages when  
outside your home network. The default setting of the multimedia message  
service is generally In home network. The availability of this menu depends on your  
phone.  
Incoming MMS msgs. — to decide how multimedia messages are retrieved. This  
setting is not shown if Allow MMS receptn. is set to No.  
Allow adverts — to receive or reject advertisements. This setting is not shown if  
Allow MMS receptn. is set to No, or Incoming MMS msgs. is set to Reject.  
Configuration sett. > Configuration — only the configurations that support  
multimedia messaging are shown. Select a service provider or Default for  
multimedia messaging. Select Account and a MMS account contained in the  
active configuration settings.  
E-mail messages  
The settings affect the sending, receiving, and viewing of e-mail. You may receive  
the settings as a configuration message. See “Configuration settings service,” p. 9.  
You can also enter the settings manually. See “Configuration,” p. 47.  
Select Menu > Messaging > Message settings > E-mail messages and from the  
following options:  
34  
New e-mail notif. — to select whether a notification is shown when new e-mails  
are received  
Allow mail reception — to select whether e-mails can be received in a foreign  
network or only in home network  
Reply with orig. msg. — to select if original message is included in reply  
Image size in e-mail — to select the size of images in e-mails  
Edit mailboxes — to add new mailboxes or edit one in use  
7. Contacts  
You can save names and phone numbers (contacts) in the phone  
memory and in the SIM card memory.  
The phone memory may save contacts with additional details, such as various  
phone numbers and text items. You can also save an image for a limited number of  
contacts.  
The SIM card memory can save names with one phone number attached to them.  
The contacts saved in the SIM card memory are indicated by  
.
I Search for a contact  
Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the  
first characters of the name you are searching for.  
I Save names and phone numbers  
Names and numbers are saved in the used memory. To save a name and phone  
number, select Menu > Contacts > Names > Options > Add new contact.  
I Save details  
In the phone memory you can save different types of phone numbers, a tone or a  
video clip, and short text items for a contact.  
The first number you save is automatically set as the default number, and it is  
indicated with a frame around the number type indicator (for example,  
).  
When you select a name from contacts (for example, to make a call), the default  
number is used unless you select another number.  
35  
       
Make sure that the memory in use is Phone or Phone and SIM. See “Settings,” p.  
37.  
Search for the contact to which you want to add a detail, and select Details >  
Options > Add detail. Select from the available options.  
I Copy or move contacts  
You can move and copy contacts from the phone memory to the SIM card  
memory, or vice versa. The SIM card can save names with one phone number  
attached to them.  
To move or copy contacts one by one, select Menu > Contacts > Names. Scroll to  
the contact, and select Options > Move contact or Copy contact.  
To move or copy multiple contacts, select Menu > Contacts > Names. Scroll to a  
contact, and select Options > Mark. Mark the other contacts, and select  
Options > Move marked or Copy marked.  
To move or copy all contacts, select Menu > Contacts > Move contacts or Copy  
contacts.  
I Edit contact details  
Search for the contact, and select Details. To edit a name, number, or text item, or  
to change the image, select Options > Edit. To change the number type, scroll to  
the desired number, and select Options > Change type. To set the selected number  
as the default number, select Set as default.  
I Synchronize all  
Synchronize your calendar, contacts data, and notes with a remote internet server  
(network service). For details see “Synchronize from a server,” p. 44.  
I Delete contacts  
To delete all the contacts and the details attached to them from the phone or SIM  
card memory, select Menu > Contacts > Del. all contacts > From phone memory  
or From SIM card.  
To delete a contact, search for the desired contact, and select Options > Delete  
contact.  
36  
       
To delete a number, text item, or an image attached to the contact, search for the  
contact, and select Details. Scroll to the desired detail, and select Options >  
Delete and from the available options.  
I Business cards  
You can send and receive a person’s contact information from a compatible device  
that supports the vCard standard as a business card.  
To send a business card, search for the contact whose information you want to  
send, and select Details > Options > Send business card.  
When you have received a business card, select Show > Save to save the business  
card in the phone memory. To discard the business card, select Exit > Yes.  
I Settings  
Select Menu > Contacts > Settings and from the following options:  
Memory in use — to select the SIM card or phone memory for your contacts. Select  
Phone and SIM to recall names and numbers from both memories. In that case,  
when you save names and numbers, they are saved in the phone memory.  
Contacts view — to select how the names and numbers in Contacts are displayed  
Name display — to select whether the contact’s first or last name is displayed first  
Font size — to set the font size for the list of contacts  
Memory status — to view the free and used memory capacity  
I Groups  
Select Menu > Contacts > Groups to arrange the names and phone numbers  
saved in the memory into caller groups with different ringing tones and group  
images.  
I Speed dialing  
To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials,  
and scroll to the speed-dialing number that you want.  
Select Assign, or if a number has already been assigned to the key, select  
Options > Change. Select Search and the contact you want to assign. If the Speed  
dialling function is not activated, the phone asks whether you want to activate it.  
See also Speed dialling in “Call,” p. 45.  
37  
       
To make a call using the speed-dialing keys, see “Speed dialing,” p. 21.  
8. Log  
The phone registers your missed, received, and dialed calls if the  
network supports it and the phone is switched on and within the network service  
area.  
To view the information on your calls, select Menu > Log > Missed calls, Received  
calls, or Dialled numbers. To view your recent missed and received calls and the  
dialed numbers chronologically, select Call log. To view the contacts to whom you  
most recently sent messages, select Msg. recipients.  
To view the information on your recent communications, select Menu > Log >  
Call duration, Data counter, or Pack. data timer.  
To view how many text and multimedia messages you have sent and received,  
select Menu > Log > Message log.  
Note: The actual invoice for calls and services from your service provider may vary,  
depending on network features, rounding off for billing, taxes, and so forth.  
9. Settings  
I Profiles  
Your phone has various settings groups called profiles, for which you can  
customize the phone tones for different events and environments.  
Select Menu > Settings > Profiles, the desired profile, and from the following  
options:  
Activate — to activate the selected profile  
Personalise — to personalize the profile. Select the setting you want to change,  
and make the changes.  
Timed — to set the profile to be active until a certain time up to 24 hours, and set  
the end time. When the time set for the profile expires, the previous profile that  
was not timed becomes active.  
38  
     
I Themes  
A theme contains elements for personalizing your phone.  
Select Menu > Settings > Themes and from the following options:  
Select theme — to set a theme. A list of folders in Gallery opens. Open the Themes  
folder, and select a theme.  
Theme downloads — to open a list of links to download more themes  
I Tones  
You can change the tone settings of the selected active profile.  
Select Menu > Settings > Tones. You can find the same settings in the Profiles  
menu. See Personalise in “Profiles,” p. 38.  
To set the phone to ring only for calls from phone numbers that belong to a  
selected caller group, select Alert for. Scroll to the caller group you want or All  
calls, and select Mark.  
Select Options > Save to save the settings or Cancel to leave the settings  
unchanged.  
If you select the highest ringing tone level, the ringing tone reaches its highest level after a  
few seconds.  
I Main display  
Select Menu > Settings > Main display and from the available options:  
Wallpaper — to add the background image in the standby mode  
Active standby — to switch the active standby mode on or off and to organize and  
personalize the active standby mode  
Standby font colour — to select the color for the texts in the standby mode  
Navigation key icons — to display the icons of the current scroll key shortcuts in  
the standby mode when active standby is off  
Notification details — to show or hide details such as contact information, in both  
missed call and message received notifications  
Fold animation — to set your phone to display an animation when you open and  
close the phone  
Font size — to set the font size for messaging, contacts, and web pages  
Operator logo — to set your phone to display or hide the operator logo  
39  
     
Cell info display > On — to display the cell identity, if available from the network  
I Mini display  
Select Menu > Settings > Mini display and from the available options:  
Wallpaper — to add the background image in the standby mode  
Screen saver — to enable a screen saver that will be activated after a selected  
time, if there is no action in the phone  
Power saver — enabling the power saver allows you to save some battery power  
Sleep mode — enabling the sleep mode allows you to save some battery power  
Fold animation — to set your phone to display an animation when you open and  
close the phone  
I Date and time  
To change the time, time zone, and date settings, select Menu > Settings > Date  
and time > Date and time settings, Date and time format, or Auto-update of time  
(network service).  
When traveling to a different time zone, select Menu > Settings > Date and  
time > Date and time settings > Time zone and the time zone of your location in  
terms of the time difference with respect to Greenwich Mean Time (GMT) or  
Universal Time Coordinated (UTC). The time and date are set according to the time  
zone and enable your phone to display the correct sending time of received text or  
multimedia messages. For example, GMT -5 denotes the time zone for New York  
(USA), 5 hours west of Greenwich/London (UK).  
I My shortcuts  
With personal shortcuts you get quick access to often used functions of the  
phone.  
Left selection key  
To select a function from the list, select Menu > Settings > My shortcuts > Left  
selection key.  
If the left selection key is Go to to activate a function, in the standby mode, select  
Go to > Options and from the following options:  
Select options — to add a function to the shortcut list or to remove one  
40  
     
Organise — to rearrange the functions on your personal shortcut list  
Right selection key  
To select a function from the list, select Menu > Settings > My shortcuts > Right  
selection key.  
Navigation key  
To assign other phone functions from a predefined list to the scroll key, select  
Menu > Settings > My shortcuts > Navigation key.  
Active standby key  
To select a function from the list, select Menu > Settings > My shortcuts > Active  
standby key.  
Voice commands  
To call contacts and carry out phone functions, say the voice commands. Voice  
commands are language-dependent. To set the language, see Recognition lang. in  
“Phone,” p. 46.  
To select the phone functions to activate with voice commands, select Menu >  
Settings > My shortcuts > Voice commands and a folder. Scroll to a function.  
indicates that the voice tag is activated. To activate the voice tag, select Add. To  
play the activated voice command, select Play. To use voice commands, see  
“Enhanced voice dialing,” p. 21.  
To manage the voice commands, scroll to a phone function, and select from the  
following options:  
Edit or Remove — to change or deactivate the voice command of the selected  
function  
Add all or Remove all — to activate or deactivate voice commands to all functions  
in the voice commands list  
I Connectivity  
You can connect the phone to a compatible device using a Bluetooth wireless  
technology or a USB data cable connection.  
41  
 
Bluetooth wireless technology  
This device is compliant with Bluetooth Specification 2.0 supporting the following profiles:  
SIM access, object push, file transfer, dial -up networking, headset, hands-free, service  
discovery application, generic access, serial port and generic object exchange. To ensure  
interoperability between other devices supporting Bluetooth technology, use Nokia  
approved enhancements for this model. Check with the manufacturers of other devices to  
determine their compatibility with this device.  
There may be restrictions on using Bluetooth technology in some locations. Check with your  
local authorities or service provider.  
Features using Bluetooth technology, or allowing such features to run in the background  
while using other features, increase the demand on battery power and reduce the battery  
life.  
Bluetooth technology allows you to connect the phone to a compatible Bluetooth  
device within 10 meters (32 feet). Since devices using Bluetooth technology  
communicate using radio waves, your phone and the other devices do not need to  
be in direct line of sight, although the connection can be subject to interference  
from obstructions such as walls or from other electronic devices.  
Set up a Bluetooth connection  
Select Menu > Settings > Connectivity > Bluetooth and from the following  
options:  
Bluetooth > On or Off — to activate or deactivate the Bluetooth function.  
indicates that Bluetooth is activated. When activating Bluetooth technology for  
the first time, you are asked to give a name for the phone. Use a unique name that  
is easy for others to identify.  
My phone's visibility or My phone's name — to define how your phone is shown to  
other Bluetooth devices.  
If you are concerned about security, turn off the Bluetooth function, or set My phone's  
visibility to Hidden. Always accept only Bluetooth communication from others with whom  
you agree.  
Search audio enhanc. — to search for compatible Bluetooth audio devices. Select  
the device that you want to connect to the phone.  
Active devices — to check which Bluetooth connection is currently active  
Paired devices — to search for any Bluetooth device in range. Select New to list  
any Bluetooth device in range. Select a device and Pair. Enter an agreed Bluetooth  
passcode of the device (up to 16 characters) to associate (pair) the device to your  
42  
phone. You must only give this passcode when you connect to the device for the  
first time. Your phone connects to the device, and you can start data transfer.  
Packet data connection (GPRS)  
General packet radio service (GPRS) is a network service that allows mobile  
phones to send and receive data over an internet protocol (IP)-based network.  
To define how to use the service, select Menu > Settings > Connectivity > Packet  
data > Packet data conn. and from the following options:  
When needed — to set the packet data connection to established when an  
application needs it. The connection will be closed when the application is ended.  
Always online — to set the phone to automatically connect to a packet data  
network when you switch the phone on  
Modem settings  
You can connect the phone using Bluetooth wireless technology or USB data  
cable connection to a compatible PC and use the phone as a modem to enable  
GPRS connectivity from the PC.  
To define the settings for connections from your PC, select Menu > Settings >  
Connectivity > Packet data > Packet data settings > Active access point, and  
activate the access point you want to use. Select Edit active access pt. > Packet  
data acc. pt., enter a name to change the access point settings, and select OK.  
Select Packet data acc. pt., enter the access point name (APN) to establish a  
connection to a network, and select OK.  
Establish an internet connection by using your phone as a modem. See “Nokia PC  
Suite,” p. 73. If you have set the settings both on your PC and on your phone, the  
PC settings are used.  
Data transfer  
Synchronize your calendar, contacts data, and notes with another compatible  
device (for example, a mobile phone), a compatible PC, or a remote internet server  
(network service).  
Your phone allows data transfer with a compatible PC or another compatible  
device when using the phone without a SIM card.  
Transfer contact list  
43  
To copy or synchronize data from your phone, the name of the device and the  
settings must be in the list of transfer contacts. If you receive data from another  
device (for example, a compatible mobile phone), the corresponding transfer  
contact is automatically added to the list, using the contact data from the other  
device. Server sync and PC synchronisation are the original items in the list.  
To add a new transfer contact to the list (for example, a mobile phone), select  
Menu > Settings > Connectivity > Data transfer > Options > Add transfer  
contact > Phone synchronisation or Phone copy, and enter the settings according  
to the transfer type.  
To edit the copy and synchronize settings, select a contact from the transfer  
contact list and Options > Edit.  
To delete a transfer contact, select it from the transfer contact list, and select  
Options > Delete.  
Data transfer with a compatible device  
For synchronization use Bluetooth wireless technology or a cable connection. The  
other device must be activated for receiving data.  
To start data transfer, select Menu > Settings > Connectivity > Data transfer and  
the transfer contact from the list, other than Server sync or PC synchronisation.  
According to the settings, the selected data is copied or synchronized.  
Synchronize from a compatible PC  
To synchronize data from calendar, notes, and contacts, install the Nokia PC Suite  
software for your phone on the PC. Use Bluetooth wireless technology or a USB  
data cable for the synchronization, and start the synchronization from the PC.  
Synchronize from a server  
To use a remote internet server, subscribe to a synchronization service. For more  
information and the settings required for this service, contact your service  
provider. You may receive the settings as a configuration message. See  
“Configuration settings service,” p. 9 and “Configuration,” p. 47.  
To start the synchronization from your phone, select Menu > Settings >  
Connectivity > Data transfer > Server sync. Depending on the settings, select  
Initialising syn-chronisation or Initialising copy.  
44  
Synchronizing for the first time or after an interrupted synchronization may take  
up to 30 minutes to complete.  
USB data cable  
You can use the USB data cable to transfer data between the phone and a  
compatible PC or a printer supporting PictBridge. You can also use the USB data  
cable with Nokia PC Suite.  
To activate the phone for data transfer or image printing, connect the data cable.  
Confirm USB data cable connected. Select mode. and select from the following  
options:  
Nokia mode — to use the phone to interact with applications on a PC that has  
Nokia PC Suite  
Printing & Media — to use the phone with a PictBridge compatible printer, or to  
connect the phone to a PC to synchronize it with Windows Media Player (music,  
video)  
Data storage — to connect to a PC that does not have Nokia software and use the  
phone as a data storage  
To change the USB mode, select Menu > Settings > Connectivity > USB data  
cable > Nokia mode, Printing & Media, or Data storage.  
I Call  
Select Menu > Settings > Call and from the following options:  
Call divert — to divert your incoming calls (network service). You may not be able  
to divert your calls if some call barring functions are active. See Call barring  
service in “Security,” p. 47.  
Anykey answer > On — to answer an incoming call by briefly pressing any key,  
except the power key, the camera key, the left and right selection keys, or the end  
key  
Automatic redial > On — to make a maximum of 10 attempts to connect the call  
after an unsuccessful call attempt  
Video-voice redial — to select whether the phone automatically makes a voice call  
to the number to which a video call failed.  
Voice clarity > Active — to enhance speech intelligibility especially in noisy  
environments  
45  
 
Speed dialling > On — to dial the names and phone numbers assigned to the  
speed-dialing keys, 3 to 9, by pressing and holding the corresponding number key  
Call waiting > Activate — to have the network notify you of an incoming call  
while you have a call in progress (network service). See “Call waiting,” p. 21.  
Summary after call > On — to briefly display the approximate duration and cost  
(network service) of the call after each call  
Send my caller ID > Yes — to show your phone number to the person you are  
calling (network service). To use the setting agreed upon with your service  
provider, select Set by network.  
Answ. if fold opened > On — to answer an incoming call by opening the fold  
Video sharing > On — to share your live camera view with the call recipient during  
an ongoing voice call. To check availability and costs, and to subscribe to the  
service, contact your network operator or service provider.  
I Phone  
Select Menu > Settings > Phone and from the following options:  
Language settings — to set the display language of your phone, select Phone  
language. Automatic selects the language according to the information on the  
SIM card. To select the USIM card language, select SIM language. To set a  
language for the voice playback, select Recognition lang.. See “Enhanced voice  
dialing,” p. 21 and Voice commands in “My shortcuts,” p. 40.  
Memory status — to view the amount of used and available phone memory  
Automatic keyguard — to set the keypad of your phone to lock automatically after  
a preset time delay when the phone is in the standby mode and no function of the  
phone has been used. Select On, and set the time.  
Security keyguard — to set the phone to ask for the security code when you unlock  
the keyguard. Enter the security code, and select On.  
Welcome note — to write the note that is shown when the phone is switched on  
Phone updates — to update your phone’s software if there is an update available  
Network mode — to select dual mode (UMTS or GSM). You cannot access this  
option during an active call  
Operator selection > Automatic — to set the phone to automatically select one of  
the cellular networks available in your area. With Manual you can select a  
network that has a roaming agreement with your service provider.  
46  
 
Help text activation — to select whether the phone shows help texts  
Start-up tone > On — the phone plays a tone when it is switched on  
Flight query > On — the phone asks every time when it is switched on whether the  
flight profile shall be used. With the flight profile all radio connections are  
switched off. The flight profile should be used in areas sensitive to radio emissions.  
Fold close handling — to select if your phone should return to standby mode or,  
keep all applications open when the fold is closed  
I Configuration  
You can configure your phone with settings that are required for certain services  
to function correctly. Your service provider may also send you these settings. See  
“Configuration settings service,” p. 9.  
Select Menu > Settings > Configuration and from the following options:  
Default config. sett. — to view the service providers saved in the phone. To set the  
configuration settings of the service provider as default settings, select Options >  
Set as default.  
Activ. def. in all apps. — to activate the default configuration settings for  
supported applications  
Preferred access pt. — to view the saved access points. Scroll to an access point,  
and select Options > Details to view the name of the service provider, data bearer,  
and packet data access point or GSM dial-up number.  
Connect to support — to download the configuration settings from your service  
provider  
Personal config. sett. — to add new personal accounts for various services  
manually, and to activate or delete them. To add a new personal account if you  
have not added any, select Add; otherwise, select Options > Add new. Select the  
service type, and select and enter each of the required parameters. The parameters  
differ according to the selected service type. To delete or activate a personal  
account, scroll to it, and select Options > Delete or Activate.  
I Security  
When security features that restrict calls are in use (such as call barring, closed user group,  
and fixed dialing), calls may be possible to the official emergency number programmed into  
your device.  
47  
   
Select Menu > Settings > Security and from the following options:  
PIN code request or UPIN code request — to set the phone to ask for your PIN or  
UPIN code every time the phone is switched on. Some SIM cards do not allow the  
code request to be turned off.  
PIN2 code request — to select whether the PIN2 code is required when using a  
specific phone feature which is protected by the PIN2 code. Some SIM cards do  
not allow the code request to be turned off.  
Call barring service — to restrict incoming calls to and outgoing calls from your  
phone (network service). A barring password is required.  
Fixed dialling — to restrict your outgoing calls to selected phone numbers if this  
function is supported by your SIM card. When the fixed dialing is on, GPRS  
connections are not possible except while sending text messages over a GPRS  
connection. In this case, the recipient’s phone number and the message center  
number must be included in the fixed dialing list.  
Closed user group — to specify a group of people whom you can call and who can  
call you (network service)  
Security level > Phone — to set the phone to ask for the security code whenever a  
new SIM card is inserted into the phone. If you select Memory, the phone asks for  
the security code when the SIM card memory is selected, and you want to change  
the memory in use.  
Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or  
barring password  
Code in use — to select whether the PIN code or UPIN code should be active  
Authority certificates or User certificates — to view the list of the authority or user  
certificates downloaded into your phone. See “Certificates,” p. 71.  
Security module sett. — to view Secur. module details, activate Module PIN  
request, or change the module PIN and signing PIN. See also “Access codes,” p. 9.  
I Digital rights management  
Digital rights management (DRM) is copyright protection, designed to prevent  
modification and to limit distribution of protected files. When you download  
protected files, such as sound, video, themes, or ringing tones to your phone, the  
files are free, but locked. You pay for the key to activate the file, and the activation  
key is automatically sent to your phone when you download the file.  
48  
 
To view the permissions for a protected file, scroll to the file, and select Options >  
Activation keys. For example, you can see how many times you can view a video or  
how many days you have left for listening to a song.  
To extend the permissions for a file, select Options and the corresponding option  
for the file type, such as Activate theme. You can send certain types of protected  
files to your friends, and they can buy their own activation keys.  
If your device has OMA DRM protected content, the only way to back up both the activation  
keys and the content is to use the backup feature of Nokia PC Suite. Other transfer methods  
may not transfer the activation keys which need to be restored with the content for you to  
be able to continue the use of OMA DRM protected content after the device memory is  
formatted. You may also need to restore the activation keys in case the files on your device  
get corrupted.  
Copyright protections may prevent some images, music (including ringing tones),  
and other content from being copied, modified, transferred, or forwarded.  
This phone supports OMA DRM 1.0 and 2.0.  
I Phone software updates  
Your service provider may send phone software updates over the air directly to  
your device. This option may not be available, depending on your phone.  
Warning: If you install a software update, you cannot use the device,  
even to make emergency calls, until the update is completed and the  
device is restarted. Be sure to back up data before accepting a software  
update.  
I Restore factory settings  
To reset some of the menu settings to their original values, select Menu >  
Settings > Rest. factory sett.. Enter the security code. The names and phone  
numbers saved in Contacts are not deleted.  
10. Operator menu  
This menu lets you access a portal to services provided by your network operator.  
The name and the icon depend on the operator. For more information contact your  
network operator. The operator can update this menu with a service message. For  
more information, see “Service inbox,” p. 70.  
49  
     
11. Gallery  
In this menu you can manage images, video clips, music files,  
themes, graphics, tones, recordings, and received files. These files are stored in the  
phone memory or a microSD memory card (not included in sales pack) and may be  
arranged in folders.  
Your phone supports an activation key system to protect acquired content. Always  
check the delivery terms of any content and activation key before acquiring them,  
as they may be subject to a fee.  
Copyright protections may prevent some images, music (including ringing tones), and other  
content from being copied, modified, transferred, or forwarded.  
To see the list of folders, select Menu > Gallery.  
To see the available options of a folder, select a folder and Options.  
To view the list of files in a folder, select a folder and Open.  
To see the available options of a file, select a file and Options.  
To view the folders of the memory card when moving a file, scroll to the memory  
card, and scroll right.  
I Print images  
Your device supports Nokia XpressPrint. To connect it to a compatible printer, use  
a USB data cable or send the image using Bluetooth to a printer supporting  
Bluetooth technology. See “Connectivity,” p. 41.  
You can print images that are in the .jpg format. The images taken with the  
camera are automatically saved in the .jpg format.  
Select the image you want to print and Options > Print.  
I Memory card  
You can use a microSD memory card to store your multimedia files such as video  
clips, music tracks, and sound files, images, and messaging data, and to back up  
information from phone memory.  
Some of the folders in Gallery with content that the phone uses (for example,  
Themes), may be stored on a memory card.  
To insert and remove a microSD memory card, see “Insert a microSD card,” p. 12.  
50  
     
Format the memory card  
When a memory card is formatted, all data on the card is permanently lost. Some  
memory cards are supplied preformatted and others require formatting. Consult  
your retailer to find out if you must format the memory card before you can use it.  
To format a memory card, select Menu >Gallery or Applications, the memory card  
folder  
, and Options > Format memory card > Yes.  
When formatting is complete, enter a name for the memory card.  
Lock the memory card  
To set a password to lock your memory card to help prevent unauthorized use,  
select Options > Set password. The password can be up to eight characters long.  
The password is stored in your phone, and you do not have to enter it again while  
you are using the memory card on the same phone. If you want to use the memory  
card on another phone, you are asked for the password. To delete the password,  
select Options > Delete password.  
Check memory consumption  
To check the memory consumption of different data groups and the available  
memory for installing new applications or software on your memory card, select  
Options > Details.  
12. Media  
You can take photos or record live video clips with the built-in  
2-megapixel camera.  
I Camera  
The camera produces pictures in .jpg format, and you can digitally zoom up to  
eight times.  
Take an image  
Press the camera key or select Menu > Media > Camera > Capture. To take  
another photo, select Back; to send the photo as a multimedia message, select  
Send. The phone saves the photo in Gallery > Images.  
51  
   
Take a self-portrait  
Close the fold and press and hold the camera key. Use the mini display as a view  
finder. Press the camera key to take the photo. Open the phone to view the  
captured picture.  
Zoom  
In camera or video mode use the volume keys to zoom in and out.  
Your device supports an image capture resolution up to 1200x1600 pixels.  
Camera options  
Select Options > Night mode on if the lighting is dim, Self-timer on to activate the  
self-timer, or Image sequence on to take images in a fast sequence. With the  
highest image size setting three images are taken in a sequence; with other size  
settings, eight images are taken.  
Select Options > Settings >Image preview time and a preview time to display the  
taken images on the display. During the preview time, select Back to take another  
image or Send to send the image as a multimedia message.  
Camera and video options  
To use a filter, select Options > Effects > Normal, Greyscale, Sepia, Negative.  
To change the camera and video settings, select Options > Settings.  
I Video  
You can record video clips in .3gp format. Available recording time depends on the  
video clip length and quality settings.  
The length and file size of the clips may vary depending on the selected quality  
and available memory.  
To set the quality of your video clips, select Menu > Media > Video > Options >  
Settings > Video clip quality > High, Normal, or Basic.  
To select the file size limit, select Menu > Media > Video > Options > Settings >  
Video clip length. Default means that the file size is limited so that it fits into a  
multimedia message (multimedia message size can vary among devices).  
Maximum means that all available memory is used. Available memory depends on  
where the video clip is stored.  
52  
 
Record a video clip  
Select Menu > Media > Video > Record or press and hold the camera key. To  
pause the recording, select Pause; to resume the recording, select Continue. To  
stop the recording, select Stop. The phone saves the recording in Gallery > Video  
clips.  
To zoom in or out, press the volume key up or down, or scroll left and right.  
I Music player  
Your phone includes a music player for listening to music tracks, recordings or  
other MP3, MP4, AAC, eAAC+, or Windows Media Player music files that you have  
transferred to the phone with the Nokia Audio Manager application, which is part  
of Nokia PC Suite. See “Nokia PC Suite,” p. 73.  
Music files stored in a folder in the phone memory or in a folder of a memory card  
will automatically be detected and added to the default track list.  
Operate the music player with the music player keys on the front of the phone or  
with the scroll keys.  
To open the music player, select Menu > Media > Music player.  
To open the music player when the phone is folded, press  
.
To open a list of all songs stored in your phone, select All songs > Open, or scroll  
right.  
To create or manage playlists, select Playlists > Open, or scroll right.  
To open folders with Artists, Albums or Genres, scroll to the one you want, and  
select Expand, or scroll right.  
To open a video list stored in your phone, select Videos > Open, or scroll right.  
Playing the music tracks  
Warning: Listen to music at a moderate level. Continuous exposure to high  
volume may damage your hearing.  
Operate the music player with the music player keys on the front of the phone or  
with the scroll keys.  
When you open the Music player menu, the details of the first track on the default  
track list are shown. To play, select  
To adjust the volume level, use the volume keys on the side of the phone.  
To pause the playing, select  
.
.
53  
 
To stop the playing, press and hold the end key.  
To skip to the next track, select . To skip to the beginning of the previous  
track, select  
To rewind the current track, select and hold  
.
. To fast forward the current  
. Release the key at the position you want.  
track, select and hold  
Music player options  
Select Menu > Media > Music player > Go to Music player. Select Options and  
from the following:  
Add to playlist — to add the current track to the playlist  
Settings > Shuffle — to play the tracks in random order or Repeat to play the  
current track or the entire track list repeatedly.  
Downloads — to connect to a browser service related to the current track. This  
function is only available when the address of the service is included in the track.  
Web page — to access a web page associated with the currently played track. This  
option is dimmed if no web page is available.  
Play via Bluetooth — to connect to an audio enhancement that uses Bluetooth  
wireless technology.  
I Radio  
The FM radio depends on an antenna other than the wireless device antenna. A compatible  
headset or enhancement needs to be attached to the device for the FM radio to function  
properly.  
Warning: Listen to music at a moderate level. Continuous exposure to high  
volume may damage your hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be extremely loud.  
Select Menu > Media > Radio.  
To open the music player when the phone is folded, press the left or right selection  
key, and select Radio.  
To use the graphical keys  
,
,
, or  
on the display, scroll left or right to  
the desired key, and select it.  
54  
 
Save radio frequencies  
1. To start the search, select and hold  
or . To change the radio frequency in  
0.05 MHz steps, briefly press  
or  
.
2. To save a frequency to a memory location, 1 to 9, press and hold the  
corresponding number key. To save a frequency to a memory location from 10  
to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9.  
3. Enter the name of the radio station.  
Listen to the radio  
Select Menu > Media > Radio. To scroll to the desired frequency, select  
or  
,
or press the headset key. To select a radio station, briefly press the corresponding  
number keys. To adjust the volume, press the volume keys.  
Select from the following options:  
Switch off — to turn off the radio  
Save station — to save a new station (shown if a new station is detected)  
Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset  
Mono output or Stereo output — to listen to the radio in monophonic sound or in  
stereo  
Stations — to select the list of saved stations. To delete or rename a station, scroll  
to the desired station, and select Options > Delete station or Rename. Select  
Visual service ID to enter a service ID given by the visual radio service provider  
(network service)  
Search all stations — to search for new radio stations  
Set frequency — to enter the frequency of the desired radio station  
Station directory — to activate the station directory to seek available radio  
stations from the network and save them for later use  
Enable visual service — to allow or deny the viewing of visual content of the  
current radio station (network service). To check the availability and costs, and to  
get the necessary settings to your phone, contact your service provider.  
When an application using a packet data or HSCSD connection is sending or  
receiving data, it may interfere with the radio.  
55  
I Voice recorder  
You can record pieces of speech, sound, or an active call, and save them in Gallery.  
This is useful when recording a name and phone number to write down later.  
The recorder cannot be used when a data call or GPRS connection is active.  
Voice recorder  
1. Select Menu > Media > Voice recorder.  
To use the graphical keys  
,
, or  
on the display, scroll left or right to  
the desired key, and select it.  
2. To start the recording, select . To start the recording during a call, select  
Options > Record. While recording a call, all parties to the call hear a faint  
beeping sound. When recording a call, hold the phone in the normal position  
near to your ear. To pause the recording, select  
.
3. To end the recording, select . The recording is saved in Gallery > Recordings.  
To listen to the latest recording, select Options > Play last recorded.  
To send the last recording, select Options > Send last recorded.  
To see the list of recordings in Gallery, select Options > Recordings list >  
Recordings.  
I Equalizer  
You can control the sound quality when using the music player by amplifying or  
diminishing frequency bands.  
Select Menu > Media > Equaliser.  
To activate a set, scroll to one of the equalizer sets, and select Activate.  
To edit or rename a selected set, select Options > Edit or Rename. Not all sets can  
be edited or renamed.  
13. Organizer  
I Alarm clock  
You can set the phone to alarm at a desired time. Select Menu > Organiser >  
Alarm clock.  
56  
       
To set the alarm, select Alarm time, and enter the alarm time. To change the alarm  
time when the alarm time is set, select On.  
To set the phone to alert you on selected days of the week, select Repeat alarm.  
To select the alarm tone or set the radio as the alarm tone, select Alarm tone:. If  
you select the radio as an alarm tone, connect the headset to the phone.  
To set a snooze time-out, select Snooze time-out and the time.  
Stop the alarm  
The phone sounds an alert tone even if the phone was switched off. To stop the  
alarm, select Stop. If you let the phone continue to sound the alarm for a minute  
or select Snooze, the alarm stops for the time you set in Snooze time-out, then  
resumes.  
If the alarm time is reached while the device is switched off, the device switches itself on  
and starts sounding the alarm tone. If you select Stop, the device asks whether you want to  
activate the device for calls. Select No to switch off the device or Yes to make and receive  
calls. Do not select Yes when wireless phone use may cause interference or danger.  
I Calendar  
Select Menu > Organiser > Calendar.  
The current day is indicated by a frame. If there are any notes set for the day, the  
day is in bold type, and the beginning of the note is shown below the calendar. To  
view the day notes, select View. To view a week, select Options > Week view. To  
delete all notes in the calendar, select the month or week view, and select  
Options > Delete all notes.  
To set the date, time, time zone, date or time format, date separator, default view,  
or the first day of the week, select Settings.  
To set the phone to delete old notes automatically after a specified time, select  
Auto-delete notes.  
Make a calendar note  
Select Menu > Organiser > Calendar. Scroll to the date, and select Options >  
Make a note and one of the following note types:  
Meeting,  
Call,  
Birthday, Memo, or Reminder. Fill in the fields.  
57  
 
Note alarm  
The phone displays the note and if set, sounds a tone. With a call note  
on the  
display, to call the displayed number, press the call key. To stop the alarm and to  
view the note, select View. To stop the alarm for 10 minutes, select Snooze.  
To stop the alarm without viewing the note, select Exit.  
I To-do list  
To save a note for a task that you must do, select Menu > Organiser > To-do list.  
To make a note if no note is added, select Add; otherwise, select Options > Add.  
Fill in the fields, and select Save.  
To view a note, scroll to it, and select View. While viewing a note, you can also  
select an option to edit the attributes. You can also select an option to delete the  
selected note and delete all the notes that you have marked as done.  
I Notes  
To write and send notes, select Menu > Organiser > Notes.  
To make a note if no note is added, select Add; otherwise, select Options > Make a  
note. Write the note, and select Save.  
I Calculator  
The calculator in your phone provides basic arithmetic and trigonometric  
functions, calculates the square and the square root, the inverse of a number, and  
converts currency values.  
Note: This calculator has limited accuracy and is designed for simple calculations.  
Select Menu > Organiser > Calculator. When 0 is displayed on the  
screen, enter the first number in the calculation. Press # for a decimal point. Scroll  
to the desired operation or function, or select it from Options. Enter the second  
number. Repeat this sequence as many times as it is necessary. To start a new  
calculation, first select and hold Clear.  
To perform a currency conversion, select Menu > Organiser > Calculator. To save  
the exchange rate, select Exchange rate. Select either of the displayed options.  
Enter the exchange rate, press # for a decimal point, and select OK. The exchange  
rate remains in the memory until you replace it with another one. To perform the  
currency conversion, enter the amount to be converted, and select Options > In  
domestic or In foreign.  
58  
     
Note: When you change base currency, you must enter new exchange rates  
because all previously set exchange rates are cleared.  
I Countdown timer  
To start the countdown timer, select Menu > Organiser > Countd. timer > Normal  
timer, enter the alarm time, and write a note text that is displayed when the time  
expires. To start the countdown timer, select Start. To change the countdown  
time, select Change time. To stop the timer, select Stop timer.  
To have an interval timer with up to 10 intervals started, first enter the intervals.  
Select Menu > Organiser > Countd. timer > Interval timer. To start the timer,  
select Start timer > Start.  
To continue to next interval period automatically, select Contin. to next period >  
Automatic or, if you want to confirm each interval, select Confirm first.  
I Stopwatch  
You can measure time, take intermediate times, or take lap times using the  
stopwatch. During timing, the other functions of the phone can be used. To set the  
stopwatch timing in the background, press the end key.  
Using the stopwatch or allowing it to run in the background when using other features  
increases the demand on battery power and reduces the battery life.  
Select Menu > Organiser > Stopwatch and from the following options:  
Split timing — to take intermediate times. To start the time observation, select  
Start. Select Split every time that you want to take an intermediate time. To stop  
the time observation, select Stop.  
To save the measured time, select Save.  
To start the time observation again, select Options > Start. The new time is added  
to the previous time. To reset the time without saving it, select Reset.  
Lap timing — to take lap times  
Continue — to view the timing that you have set in the background  
Show last — to view the most recently measured time if the stopwatch is not reset  
View times or Delete times — to view or delete the saved times  
59  
   
14. Push to talk  
Select Menu > Push to talk.  
Push to talk (PTT) over cellular is a two-way radio service available over a GPRS  
cellular network (network service).  
You can use PTT to have a conversation with one person or with a group of people  
(channel) having compatible devices. While you are connected to the PTT service,  
you can use the other functions of the phone.  
To check availability and costs, and to subscribe to the service, contact your  
network operator. Roaming services may be more limited than for normal calls.  
Before you can use the PTT service, you must define the required PTT service  
settings. See “PTT settings,” p. 64 and “Configuration settings,” p. 65.  
I PTT channels  
A PTT channel comprises a group of people (for example, friends or a workteam)  
who joined the channel after they where invited. When you call a channel, all  
members joined to the channel hear the call simultaneously.  
There are different types of PTT channels:  
Public channel — Every channel member can invite other persons.  
Private channel — Only persons who receive an invitation by the channel creator  
can join in.  
Provisioned channel — A permanent channel is created by the service provider.  
To set the status of each channel, select Active or Inactive.  
The number of active channels and the number of members per channel is limited.  
Contact your service provider for details.  
Create a channel  
To add a channel, select Menu > Push to talk > Add channel, and enter the  
settings in the form fields:  
Channel name: — Enter a name for the new channel.  
Channel status: — Select Active to set the channel active, or Inactive to disable the  
channel.  
Nickname in channel: — Enter your nick name to be shown the new channel.  
60  
   
Channel security: — Select Public channel or Private channel.  
Image: — Select Change and an image from the Gallery or the Default graphic to  
set a graphic for the new channel.  
To send an invitation to the channel, select Yes when the phone requests it. The  
recipient of the invitation is added to the member list of the channel when the  
invitation is accepted. To send further invitations, select Menu > Push to talk >  
Channel list, a channel, and Options > Send invitation. To send the invitation, use  
a text message or an infrared connection.  
To add a provisioned channel, select Menu > Push to talk > Add channel >  
Options > Edit add. manually. Enter the Channel address: provided by your service  
provider.  
Receive an invitation  
1. When you receive a text message invitation to a channel, Channel invitation  
received: is displayed.  
2. To view the nickname of the person who sent the invitation and the channel  
address if the channel is not a private channel, select View.  
3. To add the channel to your phone, select Save.  
4. To set the status for the channel, select Active or Inactive.  
To reject the invitation, select Exit > Yes, or select View > Discard > Yes.  
I Switch PTT on and off  
To connect to the PTT service, select Menu > Push to talk > Switch PTT on, or press  
and hold the PTT (volume up) key.  
indicates the PTT connection.  
indicates  
that the service is temporarily unavailable. If you have added channels to the  
phone, you are automatically joined to the active channels.  
You may assign a default function to the PTT key to open the channel list, the  
contacts list, or a single channel or contact. See “PTT settings,” p. 64.  
To disconnect from the PTT service, select Switch PTT off.  
I Make and receive a PTT call  
Warning: Listen to music at a moderate level. Continuous exposure to high  
volume may damage your hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be extremely loud.  
61  
   
To make a channel call, a one-to-one call, or a call to multiple recipients, press  
and hold the PTT key as long as you talk. To listen to the response, release the PTT  
key.  
You may be able to check the login status of your contacts in Menu > Push to  
talk > Contacts list. This service depends on your network operator and is only  
available for subscribed contacts. To subscribe a contact, select  
Options >Subscribe contact, or if one or more contacts are already marked,  
Subscribe marked.  
or  
indicates that the person does not want to be disturbed, but can receive  
callback requests. indicates that the person does not have PTT switched on.  
indicate that the person is either available or unknown.  
Make a channel call  
To make a call to a channel, select Channel list in the PTT menu, scroll to the  
desired channel, and press and hold the PTT (volume up) key.  
Make a one-to-one call  
To start a one-to-one call from the list of contacts to which you have added the  
PTT address, select Contacts > Names or Menu > Push to talk > Contacts list.  
Scroll to a contact, and press and hold the PTT key.  
To start a one-to-one call from the list of PTT channels, select Channel list, scroll  
to the desired channel, and select Members. Scroll to the desired contact, and  
press and hold the PTT key.  
To start a one-to-one call from the list of callback requests you have received,  
select Callback inbox. Scroll to the desired nickname, and press and hold the PTT  
key.  
Make a PTT call to multiple recipients  
You can select multiple PTT contacts from the contact list. The recipients receive  
an incoming call and need to accept the call to participate. If supported by your  
network operator, you may also select contacts with a phone number but without  
a PTT number. For details, contact your network operator.  
1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.  
2. Press and hold the PTT key to start the call. The participating contacts are  
shown on the display, as soon as they join the call.  
62  
3. Press and hold the PTT key to talk. Release the PTT key to hear the response.  
4. Press the end key to terminate the call.  
Receive a PTT call  
A short tone notifies you of an incoming PTT call. Informations such as the  
channel, the phone number, or the nickname (network service) of the caller are  
displayed.  
You can either accept or reject an incoming one-to-one call if you have set the  
phone to first notify you of the one-to-one calls.  
When you press and hold the PTT key while the caller is talking, you hear a tone,  
and Queuing is displayed. Press and hold the PTT key, and wait for the other person  
to finish; then you can talk immediately.  
I Callback requests  
If you make a one-to-one call and do not get a response, you can send a request  
for the person to call you back.  
Send a callback request  
You can send a callback request in the following ways:  
To send a callback request from the contacts list in the Push to talk menu, select  
Contacts list. Scroll to a contact, and select Options > Send PTT callback.  
To send a callback request from Contacts, search for the desired contact, and  
select Details. Scroll to the PTT address, and select Options > Send PTT callback.  
To send a callback request from the channel list in the PTT menu, select Channel  
list, and scroll to the desired channel. Select Members, scroll to the desired  
contact, and select Options > Send PTT callback.  
To send a callback request from the callback request list in the Push to talk menu,  
select Callback inbox. Scroll to a contact, and select Options > Send PTT callback.  
Respond to a callback request  
When someone sends you a callback request, Callback request received is  
displayed in the standby mode.  
To open Callback inbox, select View. The list of nicknames of the persons who have  
sent you callback requests is shown.  
63  
 
To make a one-to-one call, select the desired request, and press and hold the PTT  
key.  
To send a call request back to the sender, select Options > Send PTT callback.  
To delete the request, select Delete.  
To save a new contact or to add the PTT address to a contact from a received  
callback request, select Options > Save as or Add to contact.  
I Add a one-to-one contact  
You can save the names of persons to whom you often make one-to-one calls in  
the following ways:  
To add a PTT address to a name in Contacts, search for the desired contact, and  
select Details > Options > Add detail > PTT address. A contact will only appear in  
the PTT contact list if the PTT address is entered.  
To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts  
list > Options > Add contact.  
To add a contact from the channel list, connect to the PTT service, select Channel  
list, and scroll to the desired channel. Select Members, scroll to the member  
whose contact information you want to save, and select Options. To add a new  
contact, select Save as. To add a PTT address to a name in Contacts, select Add to  
contact.  
I PTT settings  
Select Menu >Push to talk > PTT settings.  
1 to 1 calls > On — to select the phone to allow the reception of incoming one-to-  
one calls. To make but not receive one-to-one calls, select Off. The service provider  
may offer some services that override these settings. To set the phone to first  
notify you of incoming  
one-to-one calls with a ringing tone, select Notify.  
PTT key def. function — to set the PTT key to one of the following functions: Open  
contact list, or Open channel list, Call contact or group. Select a contact, a group,  
or Call PTT channel, and select a channel. When you press and hold the PTT key, the  
selected function is performed.  
Show my login status — to enable or disable the sending of the login status  
PTT status in startup > Yes or Ask first — to set the phone to automatically connect  
to the PTT service when you switch the phone on  
64  
   
PTT when abroad — to switch the PTT service on or off when the phone is used  
outside of the home network  
Send my PTT address > No — to hide your PTT address from channel and one-to-  
one calls  
I Configuration settings  
You may receive the settings for connecting to the service from your service  
provider. See “Configuration settings service,” p. 9. You can enter the settings  
manually. See “Configuration,” p. 47.  
To select the settings for connecting to the service, select Menu > Push to talk >  
Configuration sett.. Select from the following options:  
Configuration — to select a service provider, Default, or Personal config. for PTT  
service. Only the configurations that support the PTT service are shown.  
Account — to select a PTT service account contained in the active configuration  
settings  
Other options are PTT user name, Default nickname, PTT password, Domain, and  
Server address.  
I Web  
Select Menu > Push to talk > Web to access the internet site of your PTT provider.  
15. Applications  
In the applications menu, you can manage applications and games.  
These files are stored in the phone memory or an attached microSD memory card  
and may be arranged in folders.  
For options to format or lock and unlock the memory card, see “Memory card,”  
p. 50.  
I Launch a game  
Your phone software includes some games.  
Select Menu > Applications > Games. Scroll to the desired game, and select Open.  
65  
       
To set sounds, lights, and shakes for the game, select Menu > Applications >  
Options > Application settings. For more options, see “Application options,” p. 66.  
I Launch an application  
Your phone software includes some Java applications.  
Select Menu > Applications > Collection. Scroll to an application, and select  
Open.  
I Application options  
Update version — to check if a new version of the application is available for  
download from Web (network service)  
Web page — to provide further information or additional data for the application  
from an internet page (network service), if available  
Application access — to restrict the application from accessing the network  
I Download an application  
Your phone supports J2ME™ Java applications. Make sure that the application is  
compatible with your phone before downloading it.  
Important: Only install and use applications and other software from trusted  
sources, such as applications that are Symbian Signed or have passed the Java  
VerifiedTM testing.  
You can download new Java applications and games in different ways.  
Use the Nokia Application Installer from PC Suite to download the applications to  
your phone, or select Menu > Applications > Options > Downloads > App.  
downloads; the list of available bookmarks is shown. See “Bookmarks,” p. 68.  
For the availability of different services, pricing, and tariffs, contact your service  
provider.  
Your device may have preinstalled bookmarks and links for third-party internet sites. You  
may also access other third-party sites through your device. Third party sites are not  
affiliated with Nokia and Nokia does not endorse or assume liability for them. If you choose  
to access such sites, you should take the precautions for security or content.  
66  
     
16. SIM services  
Your SIM card may provide additional services. You can access this  
menu only if it is supported by your SIM card. The name and contents of the menu  
depend on the available services.  
For availability and information on using SIM card services, contact your SIM card vendor.  
This may be the service provider or other vendor.  
Accessing these services may involve sending messages or making a phone call for  
which you may be charged.  
17. Web  
You can access various mobile internet services with your phone  
browser.  
Important: Use only services that you trust and that offer adequate security and  
protection against harmful software.  
Check the availability of these services, pricing, tariffs, and instructions  
with your service provider.  
With the phone browser you can view the services that use wireless markup  
language (WML) or extensible hypertext markup language (XHTML) on their  
pages. Appearance may vary due to screen size. You may not be able to view all  
details of the internet pages.  
I Set up browsing  
You may receive the configuration settings required for browsing as a  
configuration message from the service provider that offers the service that you  
want to use. See “Configuration settings service,” p. 9. You can also enter all the  
configuration settings manually. See “Configuration,” p. 47.  
I Connect to a service  
Ensure that the correct configuration settings of the service are activated.  
1. To select the settings for connecting to the service, select Menu > Web >  
Settings > Configuration sett..  
67  
       
2. Select Configuration. Only the configurations that support browsing service  
are shown. Select a service provider, Default, or Personal config. for browsing.  
See “Set up browsing,” p. 67.  
3. Select Account and a browsing service account contained in the active  
configuration settings.  
4. Select Displ. term. window > Yes to perform manual user authentication for  
intranet connections.  
Make a connection to the service in one of the following ways:  
• Select Menu > Web > Home; or in the standby mode, press and hold 0.  
• To select a bookmark of the service, select Menu > Web > Bookmarks.  
• To select the last URL, select Menu > Web > Last web addr..  
• To enter the address of the service, select Menu > Web > Go to address. Enter  
the address of the service, and select OK.  
I Browse pages  
After you make a connection to the service, you can start browsing its pages. The  
function of the phone keys may vary in different services. Follow the text guides  
on the phone display. For more information, contact your service provider.  
Browse with phone keys  
To browse through the page, scroll in any direction.  
To select an item, press the call key, or select Select.  
To enter letters and numbers, press the 0 to 9 keys. To enter special characters,  
press *.  
Direct calling  
While browsing, you can make a phone call, and save a name and a phone number  
from a page.  
I Bookmarks  
You can save page addresses as bookmarks in the phone memory.  
1. While browsing, select Options > Bookmarks; or in the standby mode, select  
Menu > Web > Bookmarks.  
68  
   
2. Scroll to a bookmark, and select it, or press the call key to make a connection  
to the page associated with the bookmark.  
3. Select Options to view, edit, delete, or send the bookmark; to create a new  
bookmark; or to save the bookmark to a folder.  
Your device may have preinstalled bookmarks and links for third-party internet sites. You  
may also access other third-party sites through your device. Third party sites are not  
affiliated with Nokia and Nokia does not endorse or assume liability for them. If you choose  
to access such sites, you should take the precautions for security or content.  
Receive a bookmark  
When you have received a bookmark that is sent as a bookmark, 1 bookmark  
received is displayed. To view the bookmark, select Show.  
I Appearance settings  
While browsing, select Options > Other options > Appearance settings; or in the  
standby mode, select Menu > Web > Settings > Appearance settings and from  
the following options:  
Text wrapping — to select how the text shall appear on the display  
Font size — to set the font size  
Show images > No — to hide images on the page  
Alerts > Alert for unsec. conn. > Yes — to set the phone to alert when a secure  
connection changes to an unsecure one during browsing  
Alerts > Alert for unsec. items > Yes — to set the phone to alert when a secure  
page contains an unsecure item. These alerts do not guarantee a secure  
connection. For more information, see “Browser security,” p. 71.  
Character encoding > Content encoding — to select the encoding for the browser  
page content  
Character encoding > Unicode (UTF-8) addr. > On — to set the phone to send a  
URL as a UTF-8 encoding  
Screen size > Full or Small— to set the screen layout  
JavaScript > Enable — to enable the Java scripts  
69  
 
I Security settings  
Cookies  
A cookie is data that a site saves in the cache memory of your phone. Cookies are  
saved until you clear the cache memory. See “Cache memory,” p. 71.  
While browsing, select Options > Other options > Security > Cookie settings; or in  
the standby mode, select Menu > Web > Settings > Security settings > Cookies.  
To allow or prevent the phone from receiving cookies, select Allow or Reject.  
Scripts over secure connection  
You can select whether to allow the running of scripts from a secure page. The  
phone supports WML scripts.  
While browsing, to allow the scripts, select Options > Other options > Security >  
WMLScript settings; or in the standby mode, select Menu > Web > Settings >  
Security settings > WMLScripts in conn. > Allow.  
I Download settings  
To automatically save all downloaded files in Gallery, select Menu > Web >  
Settings > Downloading sett. > Automatic saving > On.  
I Service inbox  
The phone is able to receive service messages sent by your service provider  
(network service). Service messages are notifications (for example, news  
headlines), and they may contain a text message or an address of a service.  
To access the Service inbox in the standby mode, when you have received a service  
message, select Show. If you select Exit, the message is moved to the Service  
inbox. To access the Service inbox later, select Menu > Web > Service inbox.  
To access the Service inbox while browsing, select Options > Other options >  
Service inbox. Scroll to the message you want, and to activate the browser and  
download the marked content, select Retrieve. To display detailed information on  
the service notification or to delete the message, select Options > Details or  
Delete.  
Service inbox settings  
Select Menu > Web > Settings > Service inbox sett..  
70  
     
To set whether you want to receive service messages, select Service messages >  
On or Off.  
To set the phone to receive service messages only from content authors approved  
by the service provider, select Message filter > On. To view the list of the approved  
content authors, select Trusted channels.  
To set the phone to automatically activate the browser from the standby mode  
when the phone has received a service message, select Autom. connection > On. If  
you select Off, the phone activates the browser only after you select Retrieve  
when the phone has received a service message.  
I Cache memory  
A cache is a memory location that is used to store data temporarily. If you have tried to  
access or have accessed confidential information requiring passwords, empty the cache  
after each use. The information or services you have accessed are stored in the cache. To  
empty the cache, while browsing, select Options > Other options > Clear the cache; in the  
standby mode, select Menu > Web > Clear the cache.  
I Browser security  
Security features may be required for some services, such as online banking or  
shopping. For such connections you need security certificates and possibly a  
security module, which may be available on your SIM card. For more information,  
contact your service provider.  
Security module  
The security module improves security services for applications requiring a  
browser connection, and allows you to use a digital signature. The security module  
may contain certificates as well as private and public keys. The certificates are  
saved in the security module by the service provider.  
To view or change the security module settings, select Menu > Settings >  
Security > Security module sett..  
Certificates  
Important: Even if the use of certificates makes the risks involved in remote  
connections and software installation considerably smaller, they must be used  
correctly in order to benefit from increased security. The existence of a certificate  
does not offer any protection by itself; the certificate manager must contain correct,  
71  
   
authentic, or trusted certificates for increased security to be available. Certificates have a  
restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown even if the  
certificate should be valid, check that the current date and time in your device are correct.  
Before changing any certificate settings, you must make sure that you really trust the owner  
of the certificate and that the certificate really belongs to the listed owner.  
There are three kinds of certificates: server certificates, authority certificates, and  
user certificates. You may receive these certificates from your service provider.  
Authority certificates and user certificates may also be saved in the security  
module by the service provider.  
To view the list of the authority or user certificates downloaded into your phone,  
select Menu > Settings > Security > Authority certificates or User certificates.  
is displayed during a connection, if the data transmission between the  
phone and the content server is encrypted.  
The security icon does not indicate that the data transmission between the gateway and the  
content server (or place where the requested resource is stored) is secure. The service  
provider secures the data transmission between the gateway and the content server.  
Digital signature  
You can make digital signatures with your phone if your SIM card has a security  
module. Using the digital signature can be the same as signing your name to a  
paper bill, contract, or other document.  
To make a digital signature, select a link on a page, for example, the title of the  
book you want to buy and its price. The text to sign, which may include the  
amount and date, is shown.  
Check that the header text is Read and that the digital signature icon  
is  
shown.  
If the digital signature icon does not appear, there is a security breach, and you  
should not enter any personal data such as your signing PIN.  
To sign the text, read all of the text first, and select Sign.  
The text may not fit within a single screen. Therefore, make sure to scroll through  
and read all of the text before signing.  
Select the user certificate you want to use. Enter the signing PIN. The digital  
signature icon disappears, and the service may display a confirmation of your  
purchase.  
72  
18. PC connectivity  
You can send and receive e-mail, and access the internet when your phone is  
connected to a compatible PC through a Bluetooth or a data cable connection.  
You can use your phone with a variety of PC connectivity and data  
communications applications.  
I Nokia PC Suite  
With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do  
notes between your phone and the compatible PC or a remote internet server  
(network service). You may find more information and PC Suite on the Nokia  
I Packet data, HSCSD, and CSD  
With your phone you can use the packet data, high-speed circuit switched data  
(HSCSD), and circuit switched data (CSD, GSM data) data services. For availability  
and subscription to data services, contact your network operator or service  
provider. See “Modem settings,” p. 43.  
The use of HSCSD services consumes the phone battery faster than normal voice  
or data calls.  
I Bluetooth  
Use the Bluetooth technology to connect your compatible laptop to the internet.  
Your phone must have activated a service provider that supports Internet access  
and your PC must support Bluetooth wireless technology. After connecting to the  
network access point (NAP) service of the phone and pairing with your PC your  
phone automatically opens a packet data connection to the internet. PC Suite  
software installation is not necessary when using the NAP service of the phone.  
See “Bluetooth wireless technology,” p. 42.  
I Data communication applications  
For information on using a data communication application, refer to the  
documentation provided with it.  
Making or answering phone calls during a computer connection is not  
recommended, as it might disrupt the operation.  
73  
         
For better performance during data calls, place the phone on a stationary surface  
with the keypad facing downward. Do not move the phone by holding it in your  
hand during a data call.  
19. Battery information  
I Charging and discharging  
Your device is powered by a rechargeable battery. The battery can be charged and  
discharged hundreds of times, but it will eventually wear out. When the talk and standby  
times are noticeably shorter than normal, replace the battery. Use only Nokia approved  
batteries, and recharge your battery only with Nokia approved chargers designated for this  
device.  
If a replacement battery is being used for the first time or if the battery has not been used  
for a prolonged period, it may be necessary to connect the charger, then disconnect and  
reconnect it to begin charging the battery.  
Unplug the charger from the electrical plug and the device when not in use. Do not leave a  
fully charged battery connected to a charger, since overcharging may shorten its lifetime. If  
left unused, a fully charged battery will lose its charge over time.  
If the battery is completely discharged, it may take several minutes before the charging  
indicator appears on the display or before any calls can be made.  
Use the battery only for its intended purpose. Never use any charger or battery that is  
damaged.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic  
object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-  
) terminals of the battery. (These look like metal strips on the battery.) This might happen, for  
example, when you carry a spare battery in your pocket or purse. Short-circuiting the  
terminals may damage the battery or the connecting object.  
Leaving the battery in hot or cold places, such as in a closed car in summer or winter  
conditions, will reduce the capacity and lifetime of the battery. Always try to keep the  
battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not  
work temporarily, even when the battery is fully charged. Battery performance is particularly  
limited in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if  
damaged. Dispose of batteries according to local regulations. Please recycle when possible.  
Do not dispose as household waste.  
74  
   
Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the  
liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or  
eyes immediately with water, or seek medical help.  
I Nokia battery authentication  
Always use original Nokia batteries for your safety. To check that you are getting an original  
Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original  
Enhancements logo on the packaging, and inspect the hologram label using the following  
steps:  
Successful completion of the four steps is not a total assurance of the authenticity of the  
battery. If you have any reason to believe that your battery is not an authentic, original  
Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia  
service point or dealer for assistance. Your authorized Nokia service point or dealer will  
inspect the battery for authenticity. If authenticity cannot be verified, return the battery to  
the place of purchase.  
Authenticate hologram  
1. When looking at the hologram on the label, you should see the  
Nokia connecting hands symbol from one angle and the Nokia  
Original Enhancements logo when looking from another angle.  
2. When you angle the hologram left, right, down, and up, you  
should see 1, 2, 3, and 4 dots on each side respectively.  
3. Scratch the side of the label to reveal a 20-digit code, for  
example, 12345678919876543210. Turn the battery so that  
the numbers are facing upwards. The 20-digit code reads  
starting from the number at the top row followed by the  
bottom row.  
75  
 
4. Confirm that the 20-digit code is valid by following the  
To create a text message enter the 20-digit code, for example,  
12345678919876543210, and send to +44 7786 200276.  
National and international operator charges will apply.  
You should receive a message indicating whether the code can be  
authenticated.  
What if your battery is not authentic?  
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic  
Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service  
point or dealer for assistance. The use of a battery that is not approved by the manufacturer  
may be dangerous and may result in poor performance and damage to your device and its  
enhancements. It may also invalidate any approval or warranty applying to the device.  
76  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be treated with  
care. The following suggestions will help you protect your warranty coverage.  
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can  
contain minerals that will corrode electronic circuits. If your device does get wet, remove  
the battery, and allow the device to dry completely before replacing it.  
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic  
components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal temperature,  
moisture can form inside the device and damage electronic circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards  
and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper operation.  
Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and  
light sensor lenses.  
Use only the supplied or an approved replacement antenna. Unauthorized antennas,  
modifications, or attachments could damage the device and may violate regulations  
governing radio devices.  
Use chargers indoors.  
Always create a backup of data you want to keep, such as contacts and calendar notes.  
To reset the device from time to time for optimum performance, power off the device  
and remove the battery.  
These suggestions apply equally to your device, battery, charger, or any enhancement. If any  
device is not working properly, take it to the nearest authorized service facility for service.  
77  
 
Disposal  
The crossed-out wheeled-bin symbol on your product, literature, or packaging  
reminds you that in the European Union all electrical and electronic products,  
batteries, and accumulators must be taken to separate collection at the end of their  
working life. Do not dispose of these products as unsorted municipal waste.  
Return the products to collection to prevent possible harm to the environment or  
human health from uncontrolled waste disposal and to promote the sustainable  
reuse of material resources. Collection information is available from the product  
retailer, local waste authorities, national producer responsibility organizations, or  
your local Nokia representative. For more information, see product Eco-Declaration  
78  
Additional safety information  
I Small children  
Your device and its enhancements may contain small parts. Keep them out of the reach of  
small children.  
I Operating environment  
This device meets RF exposure guidelines when used either in the normal use position  
against the ear or when positioned at least 1.5 centimeters (5/8 inch) away from the body.  
When a carry case, belt clip, or holder is used for body-worn operation, it should not contain  
metal and should position the device the above-stated distance from your body.To transmit  
data files or messages, this device requires a quality connection to the network. In some  
cases, transmission of data files or messages may be delayed until such a connection is  
available. Ensure the above separation distance instructions are followed until the  
transmission is completed.  
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not  
place credit cards or other magnetic storage media near the device, because information  
stored on them may be erased.  
I Medical devices  
Operation of any radio transmitting equipment, including wireless phones, may interfere  
with the functionality of inadequately protected medical devices. Consult a physician or the  
manufacturer of the medical device to determine if they are adequately shielded from  
external RF energy or if you have any questions. Switch off your device in health care  
facilities when any regulations posted in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that could be sensitive to external RF energy.  
Implanted medical devices  
Manufacturers of medical devices recommend that a minimum separation of 15.3  
centimeters (6 inches) should be maintained between a wireless device and an implanted  
medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid  
potential interference with the medical device. Persons who have such devices should:  
Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical  
device when the wireless device is turned on.  
Not carry the wireless device in a breast pocket.  
Hold the wireless device to the ear opposite the medical device to minimize the potential  
for interference.  
Turn the wireless device off immediately if there is any reason to suspect that  
interference is taking place.  
79  
 
Read and follow the directions from the manufacturer of their implanted medical device.  
If you have any questions about using your wireless device with an implanted medical  
device, consult your health care provider.  
Hearing aids  
Some digital wireless devices may interfere with some hearing aids. If interference occurs,  
consult your service provider.  
I Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic systems in  
motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)  
braking systems, electronic speed control systems, and air bag systems. For more  
information, check with the manufacturer, or its representative, of your vehicle or any  
equipment that has been added.  
Only qualified personnel should service the device or install the device in a vehicle. Faulty  
installation or service may be dangerous and may invalidate any warranty that may apply to  
the device. Check regularly that all wireless device equipment in your vehicle is mounted  
and operating properly. Do not store or carry flammable liquids, gases, or explosive materials  
in the same compartment as the device, its parts, or enhancements. For vehicles equipped  
with an air bag, remember that air bags inflate with great force. Do not place objects,  
including installed or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag  
inflates, serious injury could result.  
Using your device while flying in aircraft is prohibited. Switch off your device before  
boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the  
operation of the aircraft, disrupt the wireless telephone network, and may be illegal.  
I Potentially explosive environments  
Switch off your device when in any area with a potentially explosive atmosphere, and obey  
all signs and instructions. Potentially explosive atmospheres include areas where you would  
normally be advised to turn off your vehicle engine. Sparks in such areas could cause an  
explosion or fire resulting in bodily injury or even death. Switch off the device at refueling  
points such as near gas pumps at service stations. Observe restrictions on the use of radio  
equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting  
operations are in progress. Areas with a potentially explosive atmosphere are often, but not  
always, clearly marked. They include below deck on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas  
where the air contains chemicals or particles such as grain, dust, or metal powders.  
80  
I Emergency calls  
Important: Wireless phones, including this device, operate using radio signals,  
wireless networks, landline networks, and user-programmed functions. Because of  
this, connections in all conditions cannot be guaranteed. You should never rely  
solely on any wireless device for essential communications like medical  
emergencies.  
To make an emergency call:  
1. If the device is not on, switch it on. Check for adequate signal strength.  
Some networks may require that a valid SIM card is properly inserted in the device.  
2. Press the end key as many times as needed to clear the display and ready the device for  
calls.  
3. Enter the official emergency number for your present location. Emergency numbers vary  
by location.  
4. Press the call key.  
If certain features are in use, you may first need to turn those features off before you can  
make an emergency call. If the device is in the offline or flight profile mode, you may need to  
change the profile to activate the phone function before you can make an emergency call.  
Consult this guide or your service provider for more information.  
If certain features are in use, you may first need to turn those features off before you can  
make an emergency call. Consult this guide or your service provider for more information.  
When making an emergency call, give all the necessary information as accurately as  
possible. Your wireless device may be the only means of communication at the scene of an  
accident. Do not end the call until given permission to do so.  
I Certification information (SAR)  
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.  
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits  
for exposure to radio waves recommended by international guidelines. These guidelines  
were developed by the independent scientific organization ICNIRP and include safety  
margins designed to assure the protection of all persons, regardless of age and health.  
The exposure guidelines for mobile devices employ a unit of measurement known as the  
Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/  
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using  
standard operating positions with the device transmitting at its highest certified power level  
in all tested frequency bands. The actual SAR level of an operating device can be below the  
maximum value because the device is designed to use only the power required to reach the  
network. That amount changes depending on a number of factors such as how close you are  
to a network base station. The highest SAR value under the ICNIRP guidelines for use of the  
device at the ear is 0.31 W/kg.  
81  
Use of device accessories and enhancements may result in different SAR values. SAR values  
may vary depending on national reporting and testing requirements and the network band.  
82  
Index  
A
access codes 9  
camera key 16  
certificates 71  
character case 24  
close bumper 15  
accessories. See enhancements.  
activation keys 49  
active standby mode 17, 39  
alarm clock 56  
antenna 15  
applications 65  
audio messages 29  
B
general 47  
barring password 9  
battery  
setting service 9  
authentication 75  
charging 13  
charging, discharging 74  
installation 11  
Bluetooth 42, 73  
bookmarks 68  
browser  
groups 37  
appearance settings 69  
bookmarks 68  
security 70  
saving 35  
settings 37  
setting up 67  
speed dialing 37  
cookies 70  
business cards 37  
copyright protection 48  
countdown timer 59  
customer service 11  
C
cache memory 71  
calculator 58  
calendar 57  
call functions 20  
call key 15  
D
data cable 45  
data communication 73  
data transfer 43  
call log 38  
call register. See call log.  
call waiting 21  
calls  
date settings 40  
deleting messages 32  
digital rights management 48  
digital signature 72  
display 15, 17  
answering 21  
international 20  
making 20  
options 22  
rejecting 21  
settings 45  
downloading protected files 48  
downloads 10, 70  
E
speed dialing 21  
voice dialing 21  
camera  
earpiece 15  
EGPRS 43  
effects 52  
filter 52  
e-mail application 30  
83  
 
end key 15  
menu 25  
ending calls 20  
enhancements 8  
equalizer 56  
message center number 26  
message folders 29  
message settings  
general 32  
F
messages  
factory settings 49  
flash messages 28  
FM radio 54  
audio messages 29  
deleting 32  
font size 39  
flash messages 28  
info messages 32  
service commands 32  
G
gallery 50  
games 65  
GPRS 43  
mini display 16, 17  
MMS. See multimedia messages.  
multimedia messages 27  
H
handsfree. See loudspeaker.  
Headset connector 16  
N
I
Navi key. See scroll key.  
navigation 25  
images 51  
IMAP4 30  
indicators 18  
info messages 32  
installation  
notes 57, 58  
battery 11  
SIM card 11  
instant messaging 31  
internet 67  
O
offline mode 20  
operator menu 49  
organizer 56  
K
keyguard 20  
keypad 15  
keypad lock 20  
keys 15, 20  
P
packet data 43, 73  
parts 15  
L
PC connectivity 73  
PC Suite 73  
language settings 46  
log 38  
phone  
configuration 47  
keys 15  
loudspeaker 16, 22  
open 14  
M
parts 15  
main display 15, 17, 39, 40  
memory card 50  
settings 46  
phone lock. See keypad lock.  
PictBridge 45  
PIN codes 9, 14  
Memory card slot 16  
memory full 29  
84  
play 16  
plug and play service 14  
POP3 30  
predictive text input 24, 25  
profiles 38  
time 40  
protected files 49  
PTT. See push to talk.  
PUK codes 9  
shortcuts 40  
push to talk 60  
pushed messages 70  
signal strength 17  
R
services 67  
radio 54  
recorder 56  
ringing tones 39  
standby mode 17, 40  
status indicators 17  
stopwatch 59  
S
safety information 6  
scroll key 15  
scrolling 25  
strap 14  
security  
codes 9  
module 71  
settings 47  
selection keys 15  
service commands 32  
service inbox 70  
service messages 70  
services 67  
T
taking images 51  
text 24  
text messages 26  
themes 39  
settings  
active standby 39  
call 45  
camera 52  
clock 40  
configuration 47  
connectivity 41  
data transfer 43  
date 40  
time settings 40  
to-do list 58  
tones 39  
traditional text input 24  
U
unlocking keypad 20  
UPIN code 14  
downloads 70  
fold animation 39, 40  
GPRS, EGPRS 43  
main display 39, 40  
messages 32  
USB port 16  
V
voice  
my shortcuts 40  
phone 46  
commands 41  
dialing 21  
profiles 38  
messages 32  
recorder 56  
volume key 16  
PTT 64  
PTT configuration 65  
restore factory settings 49  
85  
W
X
wallpaper 39, 40  
web 67  
XHTML 67  
wireless markup language (WML) 67  
wrist strap 14  
writïng text 24  
Z
zoom key 16  
86  

Tivoli Audio Three User Manual
Technics SL PG440 User Manual
Sony MC 30 User Manual
Sony ICFCS10IP User Manual
Sony DREAM MACHINE 3 288 976 11(1) User Manual
Seagate SAVVIO ST9300653SS User Manual
Samsung SGH d347 User Manual
Research In Motion Blackberry Cell Phone SWD 2005926 0418040813 001 User Manual
Numark Industries CDN 20S User Manual
Nokia 6162 User Manual