Nokia 6162 User Manual

OWNER’S

MANUAL

K e ys

Power key

Press and hold to turn your phone

on or off.

Softkeys

Their current

function is

displayed

above the key

(for example,

here their

functions are

“Menu” and

“Names”).

Scroll keys

0HQX 1DPHV

Scroll through

menus, sub-

menus, and

the phone

book. Press

and hold for

continuous

scrolling.

Push this key

to end a

phone call.

Dials the

number on

the display.

Keypad

cover

Flip it open to

answer a call

and to access

the keypad.

Flip it closed

to end a call.

Q u ic k g u id e to fu n c t io n s

Note: If you have trouble accessing a feature, try starting from

the start screen. To get to the start screen, press

time except during a call (unless you want to hang up).

at any

Accessing your phone book - Press W or V

key except

keypad cover setting

Answering a Call Waiting with another call

active - Press

^{Answering a call}ð^{- Open keypad cover or press any}

if you have not activated the

ó _(pressó _{to swap calls; press}

ô _{to end both calls)}

Clearing a digit from the display - Press &OHDU

Emergency 9 call - Press and hold 9 for three sec-

onds

(Emergency key 9 feature must be set to on!)

Ending a call - Press

if you have activated the keypad cover setting

or close the keypad cover

Keyguard activation - Press and hold

ORFNHG appears, or press 0HQX ó

until .H\V

Last number redial - Press

^{Keyguard deactivation - Pr}ó^{ess 8QORFN, then -}

, wait three seconds

Listening to voice messages - With 1HZ YRLFH

PHVVDJH on display, press /LVWHQ or press

voice mail subscription)

(requires

Making a call - Enter phone number, then press

One-touch dialing - After you assign the one-touch

dialing locations, press and hold a number key (2

through 8 only) for two seconds

Profiles - Quickly press

once, scroll through profile

to choose profile

list with the key; press and hold

Storing a name and number (Quick Save) -

Enter the phone number and press 6DYH. Enter a name

if you wish (optional), then press 2.

Switching on/off - Press and hold

for 2 seconds

Volume adjust - During a call, press ^Vto increase

your phone’s volume or ^Wto decrease

Q u ic k g u id e t o t h e m e n u

Back one level - Press %DFN

Entering the menu - From start screen, press 0HQX

Exiting the menu - Press ([LW or %DFN repeatedly, or

press

Scrolling the menu - Press 0HQX, then W or V

Selecting a submenu or option - Press 6HOHFW or 2.

Using shortcuts - Press 0HQX, then menu number,

then submenu number

M e n u s u m m a r y:

M e s s a g e s

Se tt in g s

Te x t m e s s a g e s

Vo ic e m e s s a g e s

We lc o m e n o t e

C a ll s e t t in g s

Ph o n e s e t t in g s

Se c u r ity s e tt in g s

N e t w o r k

C a ll lo g

s e r v ic e s

M is s e d c a lls

D ia le d c a lls

Re c e iv e d c a lls

C le a r c a ll lis ts

C a ll t im e r s

Sys t e m

Au t o m a t ic

M a n u a l

N e w s e a r c h

G a m e s

Pr o file s

N o r m a l

Sile n t

M e e t in g

O u t d o o r

C a lc u la t o r

C a le n d a r

K e y g u a r d

Pa g e r

C a r (once phone is

connected to a car kit)

H e a d s e t (once

phone is connected to a

headset)

In d ic a t o r s a n d Ic o n s

You have an active call.

The phone is waiting for you to enter a response.

Ringing tones for the current profile has been set to

6LOHQW.

Keyguard has been activated to help prevent any acci-

dental keypresses.

You have one or more voice messages waiting.

You have one or more unread text messages waiting.

Digital service is available.

Any characters you enter will be upper-case letters or

numbers. Press the # key to switch letter case.

Any characters you enter will be lower-case letters or

numbers. Press the # key to switch letter case.

This appears when you press and hold the # key when

storing names. Letters can not be entered when this

appears, allowing quicker access to numbers.

You are in “special character” mode; select a special

character and press ,QVHUW. (When entering letters, you

can switch to this mode by pressing the ∗ key.)

The alarm clock is set.

You have a reminder in your calendar to do something

(appears only on Calendar display).

You have a reminder in your calendar that it’s some-

one’s birthday (appears only on Calendar display).

You have a reminder in your calendar to call someone

(appears only on Calendar display).

You have a reminder in your calendar of a meeting

(appears only on Calendar display).

Ta b le o f C o n te n ts

Sa fe ty A t A G la n c e . . . . . . . . . . . . . . . . . 3

G e tt in g C o n n e c t e d . . . . . . . . . . . . . . . . . 5

Installing your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Charging your new battery . . . . . . . . . . . . . . . . . . . . . . 5

Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Th e B a s ic s . . . . . . . . . . . . . . . . . . . . . . . 9

Switching on the phone . . . . . . . . . . . . . . . . . . . . . . . . . 9

Checking signal strength . . . . . . . . . . . . . . . . . . . . . . . . 9

Using the keypad cover . . . . . . . . . . . . . . . . . . . . . . . . 10

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Switching off the phone . . . . . . . . . . . . . . . . . . . . . . . . 11

Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

W o r k in g Th e M e n u . . . . . . . . . . . . . . . . 13

Navigating tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

What is the ‘start screen’? . . . . . . . . . . . . . . . . . . . . . . 14

Scrolling through the main menu . . . . . . . . . . . . . . . . . 15

Help text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Summary of Menu Items . . . . . . . . . . . . . . . . . . . . . . . 16

Yo u r Ph o n e A t o Z . . . . . . . . . . . . . . . . 18

A c c e s s o r ie s . . . . . . . . . . . . . . . . . . . . . 7 3

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Chargers & Other Accessories . . . . . . . . . . . . . . . . . . . 75

Tr o u b le s h o o t in g . . . . . . . . . . . . . . . . . . 7 8

Re fe r e n c e In fo r m a t io n . . . . . . . . . . . . . 7 9

Te c h n ic a l D a ta . . . . . . . . . . . . . . . . . . . 8 4

1. S a f e t y A t A G la n c e

Read these simple guidelines before using your

phone. Failure to comply with these guidelines may

be dangerous or illegal.

For more detailed safety information, “Important

Safety Information” on page 79.

Ro a d Sa fe ty C o m e s Fir s t

Don’t use a hand-held phone while driving; park the

vehicle first.

Sw it c h O ff In H o s p it a ls

Switch off your phone when near medical equip-

ment. Follow any regulations or rules in force.

Sw it c h O ff O n A ir c r a ft

Mobile phones can cause interference. Using them

on aircraft is illegal.

Sw it c h O ff W h e n Re fu e lin g

Do not use the phone at a refueling point. Do not

use near fuels or chemicals.

Sw it c h O ff N e a r B la s tin g

Do not use the phone where blasting is in progress.

Observe restrictions, and follow any regulations or

rules in force.

In t e r fe r e n c e

All mobile phones may get interference which could

affect performance.

Us e Se n s ib ly

Use only in the normal position (to ear). Avoid un-

necessary contact with the antenna when phone is

on.

Q u a lifie d Se r v ic e

Only qualified service personnel may install or repair

cellular phone equipment. Use only approved ac-

cessories and batteries.

A c c e s s o r ie s a n d B a t t e r ie s

Use only approved accessories and batteries. Do

not connect incompatible products.

FC C /In d u s t r y C a n a d a N o t ic e

Your phone may cause TV or radio interference (e.g. when using

a telephone in close proximity to receiving equipment). The

FCC/Industry Canada can require you to stop using your tele-

phone if such interference can not be eliminated. If you require

assistance, contact your local service facility.

This device complies with part 15 of the FCC rules. Operation is

subject to the condition that this device does not cause harmful

interference.

Us in g th is G u id e

The wireless phone described in this guide is approved for use

in TDMA/AMPS networks.

A number of features included in this guide are called Network

Services. They are special services provided by wireless service

providers. Before you can take advantage of any of these Net-

work Services, you must subscribe to the service(s) from your

home service provider and obtain instructions for their use.

D is c la im e r

It’s possible that you may not be able to activate your phone on

all wireless systems. Please see your service provider for details.

2 . G e t t in g C o n n e c t e d

So you’ve just bought your new phone, taken it out of

the box, and you’re wondering what to do next. Well,

this chapter will help get you started.

In s t a llin g yo u r b a tt e r y

Simply place the battery in the grooves on the back of

your phone. Then slide the battery upward until it clicks.

Note: Use only those batteries approved by the phone manu-

facturer and recharge your battery only with the chargers

approved by the manufacturer.

See “Important Battery Information” on page 8.

C h a r g in g yo u r n e w b a tt e r y

Your phone can be used with either a rechargeable

Li-Ion or NiMH battery. Note that a new battery’s full

performance is achieved only after two or three

complete charge and discharge cycles.

With your phone on or off, simply connect the lead from

the charger to the bottom of your phone or place it on

a charging stand. Then connect the charger to a stan-

dard 120V AC outlet.

When the battery begins charging, your phone will beep

once and the battery strength indicator on the right side

of the display will scroll.

Note: If you’re charging the battery for the first time, the battery

strength indicator bars will not scroll the entire time. If your

phone is off, the scroll bars will disappear long before the 24

hours have elapsed. This is normal. If your phone is on, the

scroll bars will stop scrolling after a while. Either way, charge the

battery for the entire 24-hour duration.

If your phone displays 1RW FKDUJLQJ, charging is sus-

pended. Check that the battery is not connected to a

non-approved charging device. If the battery is very hot

or cold, wait for a while; charging will automatically re-

sume after the battery is restored to its normal operating

state. If charging still fails, contact your dealer.

When is a good time to charge?

Actually, you can charge anytime. If you have a NiMH

battery, you should allow it to completely discharge

once in a while.

When your phone beeps once and displays %DWWHU\ ORZ,

you only have a couple of minutes of talk time remain-

ing. The repetition rate of these battery-low warnings

depend on the remaining battery capacity and the bat-

tery condition. These warnings are more frequent when

you’re in a call.

Note: The phone will not give you the warning tone under cer-

tain conditions. See “Warning tones” on page 71.

Once all the power has drained from your battery, you’ll

hear three beeps with the message 5HFKDUJH EDWWHU\ on

your display. At this point, your phone will switch itself

off and you’ll need to recharge your battery.

When is charging complete?

When the charge indicators stop scrolling, your

phone is considered fully charged. However, a

slight increase in charge may occur if your

phone is left connected to the charger for a

while. This is called “trickle charge.”

Charging times depend on the type of battery and

charger used.

For approximate charging and operating times, see “Batteries”

on page 73.

Can you make calls while charging?

Yes, you can. But your battery may not charge while a

call is in progress. Charging should resume once you

end the call.

Discharging NiMH batteries

A NiMH battery lasts longer and performs better if you

fully discharge it from time to time. To discharge the bat-

tery, leave your phone switched on until the battery is

drained. The phone will display several messages that

the battery is low and that you need to recharge it; just

ignore them.

Note: Do not attempt to discharge the battery by any other

means.

When do I need to buy a new battery?

The battery can be charged and discharged hundreds

of times, but it will eventually wear out. When the oper-

ating time (talk-time and standby time) is noticeably

shorter than normal, it’s time to buy a new battery.

Re m o v in g t h e b a tt e r y

Note: Switch off the phone before removing the battery!

1) Press and hold the

button at the top of

the battery.

2) Slide the battery

toward the bottom of

the phone.

3) Lift the battery off the phone.

Im p o r ta n t B a t te r y In fo r m a tio n

•

Note that a new battery’s full performance is achieved only

after two or three complete charge and discharge cycles!

•

The battery can be charged and discharged hundreds of

times but it will eventually wear out. When the operating

time (talk time and standby time) is noticeably shorter than

normal, it is time to buy a new battery.

•

Use only batteries approved by the phone manufacturer

and recharge your battery only with the chargers approved

by the manufacturer. When a charger is not in use, discon-

nect it from the power source. Do not leave the battery

connected to a charger for longer than a week, since over-

charging may shorten its life. If left unused a fully charged

battery will discharge itself over time.

•

(NiMH batteries only) For good operation times, discharge

the battery from time to time by leaving your phone

switched on until it turns itself off (or by using the battery

discharge facility of any approved accessory available for

your phone). Do not attempt to discharge the battery by

any other means.

Temperature extremes will affect the ability of your battery

to charge: allow it to cool down or warm up first.

•

Use the battery only for its intended purpose.

Never use any charger or battery which is damaged or

worn out.

•

Do not short circuit the battery. Accidental short circuiting

can occur when a metallic object (coin, clip, or pen)

causes direct connection of the + and - terminals of the

battery (metal strips on the back of the battery), for

example when you carry a spare battery in your pocket or

purse. Short circuiting the terminals may damage the

battery or the connecting object.

Leaving the battery in hot or cold places, such as in a

closed car in summer or winter conditions, will reduce the

capacity and lifetime of the battery. Always try to keep the

battery between 59º F and 77º F (15º C and 25º C). A

phone with a hot or cold battery may temporarily not work,

even when the battery is fully charged. NiMH batteries’

performance is particularly limited in temperatures below

14º F (-10º C). Li-ion batteries’ performance is particularly

limited in temperatures below 32º F (-0º C).

•

Do not dispose of batteries in a fire!

Batteries must be recycled or disposed of properly. Must

not be disposed of in municipal waste.

3 . T h e B a s ic s

Your phone is designed with many powerful features

that you can learn to use as needed. This chapter cov-

ers the basic information you need to use your phone.

A more comprehensive description of your phone is

covered in “Your Phone A to Z” starting on page 18.

Sw it c h in g o n th e p h o n e

Press and hold the

the phone.

key for two seconds to switch on

NORMAL POSITION: Hold the phone as you would any other

telephone with the antenna pointed up and over your shoulder.

TIPS ON EFFICIENT OPERATION: As with any other radio

transmitting device, do not touch the antenna unnecessarily

when the phone is switched on. Contact with the antenna af-

fects call quality and may cause the phone to operate at a

higher power level than otherwise needed.

WARNING! Do not switch on the phone when wireless phone

use is prohibited or when it may cause interference or danger.

See “Safety At A Glance” on page 3 for more information.

C h e c k in g s ig n a l s tr e n g th

Your phone operates on radio waves, and the quality of

radio reception depends entirely on the strength of the

radio signal in your area.

This radio coverage is maintained by a wireless network

and the quality of calls on a wireless phone depends on

the strength of the wireless radio signal.

Get a strong signal

When you are at the start screen

(see page 14)

or in a call, the strength of the radio signal is in-

dicated by the signal indicators on the left side

of your phone’s display. These indicators scroll

as the strength of the signal increases and

decreases.

Increasing your phone’s signal may be easy. Try moving

your phone slightly, or move towards a window if you’re

calling from inside a building.

Us in g th e k e yp a d c o v e r

When .H\SDG FRYHU VHWWLQJ is on, you can answer calls

simply by opening the keypad cover. When you want to

hang up, just close the cover and the call will end.

When the keypad cover setting is off, you must open

the keypad cover to answer any calls. Once opened,

you can press any key (except the

answer a call.

and

keys) to

To end a call, press

cover.

before closing the keypad

Activating the keypad cover

1) Press 0HQX 4 2 6

2) Press ^Wor V to 2Q and press 2.

Note: If you’re using a headset and wish to close the keypad

cover and still keep the call active, press 2SWLRQV once before

closing the keypad cover.

M a k in g a c a ll

enter the area code and phone number and press

^{When you want to make a call, open the keypad co}ó^ver,

Editing a number on display

Press ^Vto move the cursor to the left and W to move it

to the right. Press &OHDU to delete the character to the left

of the cursor.

Dialing a phone number stored in the phone

book

from the start screen (

, then press

^{View stored names and numbers by pressing W}ó^{or V}

see page 14)

Emergency calls

See “Emergency calls” on page 34.

En d in g a c a ll

cover. Otherwise, press

^{If .H\SDG FRYHU VHWWLQJ is a}ô^{ctive, simply close the keypad}

See “Using the keypad cover” on page 10.

A n s w e r in g a c a ll

The phone rings according to the

settings in the currently selected

profile

(see page 55)

If .H\SDG FRYHU VHWWLQJ is active, sim-

Otherwise, press any key except

^{ply open the keypad cover to ans}ô^{wer the call.}

Note: If Keyguard is on (see page 11), only

See “Using the keypad cover” on page 10.

answers calls.

Sw it c h in g o ff t h e p h o n e

Press and hold the

Quickly press the

highlighted) then press 2..

key for two seconds OR

key (6ZLWFK RII$ will appear,

K e yg u a r d

This feature helps to prevent acci-

dental key presses (e.g. when

your

phone is in your pocket, in your

purse) by locking your keypad. If any

keys are pressed while Keyguard is

activated, 3UHVV 8QORFN DQG WKHQ - will display.

Activating Keyguard

Press and hold

Press 0HQX ∗

Activating Keyguard via the menu

At the start screen,

1) Press 0HQX 9 (.H\JXDUG)

2) .H\V ORFNHG will appear on the display

Deactivating Keyguard

Press 8QORFN/ then -

Keyguard can not be activated when

car kit or in any handsfree kit.

phone is in a

your

Note: When Keyguard is 21, calls to the emergency number

programmed into your phone (e.g. by pressing 911 then

)

may be possible. However, Emergency key 9 doesn’t work.

Answering a call with Keyguard active

During an incoming call the keypad automatically un-

locks. However, you can answer a call only by opening

the keypad cover if it’s active; otherwise, press only

ó. After you end the call, Keyguard automatically

becomes active again.

Some notes about Keyguard

•

Calls may be possible to the emergency number pro-

grammed into your phone (e.g. 911 or other official emer-

gency number). The number is displayed only after you

have keyed in its last digit.

•

Pressing the

key quickly turns lights on for 15 seconds.

Keyguard is automatically turned off when the phone is

connected to a car kit.

4 . W o r k in g Th e M e n u

Your phone contains several menus and submenus,

giving you access to certain options and allowing you to

customize your phone to suit your individual needs.

This section describes several different tools your

phone uses to access many of its features. Once you

have mastered these tools, using your phone should be

easier than ever.

N a v ig a t in g t o o ls

Softkeys

Your phone has two softkeys that

appear below the display. Their cur-

rent function is indicated by the

words appearing above them. Sim-

ply press the corresponding key

under the choice you wish to select.

This illustration shows the phone at the start screen (see

“What is the ‘start screen’?” on page 14). The start

screen always displays 0HQX on the left and 1DPHV on

the right. 0HQX allows you to access your phone’s

menus and submenus. 1DPHV allows you to access

your phone book (see “Phone book” on page 50).

Scroll button

Your phone has a scroll button located just below the

display screen. The scroll button has two arrows on it

that look like ^Vand W. Press these arrows to navigate

through your phone’s menus and submenus, as well as

through your phone book (See “Phone book” on

page 50).

Scroll bar

When you access your phone’s menu and sub-

menus, you will notice a scroll bar at the far right

of the screen. This bar indicates where you are in

the menu structure; each “tab” on the bar repre-

sents a different menu item.

For example, press 0HQX once. The scroll bar appears

with the first (top) tab displayed. A different tab appears

each time you press the ^Wor V key to move up and

down through the menu structure. The scroll bar works

the same way with submenus.

Menu & submenu numbering

When you scroll to a menu or submenu, the menu num-

ber and/or submenu number appears on the display

above the scroll bar. If you become familiar with these

numbers, you can use them as shortcuts for accessing

different menus.

For example, when you scroll to menu 2 (&DOO ORJ) the

number 5 appears in the top right-hand corner of the

display. If you scroll to menu 4 (6HWWLQJV), submenu 3

(6HFXULW\ VHWWLQJV), your phone will display 706 in the top

right-hand corner.

Also, see “Using shortcuts” on page 15.

W h a t is t h e ‘s ta r t s c r e e n ’?

The start screen appears when you first turn your phone

on, in its idle state.

When you want to get to the start screen

Press

you want to hang up)

at any time except during a call (unless

If you press

when the phone is requesting input (for

example, a setting, phone number, name, etc.), the

phone displays the start screen and the input is not

saved.

Sc r o llin g th r o u g h t h e m a in m e n u

1) At the start screen, press 0HQX

2) Press W or V to reach the desired menu item

3) Press 6HOHFW, 2SWLRQV or 2. (whichever appears) to

enter submenus and to choose options

4) Press ([LW to exit the present menu or %DFN to go

back one level

Using shortcuts

This is a quick and easy way to access a menu without

having to scroll through other menus.

Press 0HQX, then menu number, then submenu number.

Press the menu and submenu numbers within a couple

of seconds of each other when using this method.

For a summary of your phone’s menu structure, see “Summary

of Menu Items” on page 16.

H e lp t e x t

If you’re not sure how a feature works, wait about ten to

fifteen seconds and help text will appear for most of

your phone’s features. Press 0RUH to see the next page

of the text or %DFN to exit.

Su m m a r y o f M e n u It e m s

M e s s a g e s

1 1 Te x t M e s s a g e s

1 1 1 Inbox

1 1 2 Saved

1 2 Vo ic e m e s s a g e s

1 2 1 Listen to voice messages

1 2 2 Voice mailbox number

1 3 W e lc o m e N o t e

C a ll lo g

2 1 M is s e d c a lls

2 2 D ia le d c a lls

2 3 Re c e iv e d c a lls

2 4 C le a r c a ll lis ts

2 5 C a ll t im e r s

P r o file s

3 1 N o r m a l

3 2 Sile n t

3 3 M e e tin g

3 4 O u td o o r

3 5 P a g e r

3 6 C a r (once used with car kit)

3 7 H e a d s e t (once used with headset)

Se t tin g s

4 1 C a ll s e tt in g s

4 1 1 Emergency key 9

4 1 2 Automatic redial

4 1 3 Calling card

4 2 P h o n e s e tt in g s

4 2 1 Clock

4 2 2 Alarm clock

4 2 3 Touch tones

4 2 4 Restore factory settings

4 2 5 Language

4 2 6 Keypad cover setting

4 3 Se c u r ity s e t t in g s

4 3 1 Restrict calls

4 3 2 Access codes

4 4 N e t w o r k s e r v ic e s

4 4 1 Voice privacy

4 4 2 Call forwarding

4 4 3 Call waiting

4 4 4 Send own number

4 4 5 Network feature setting

4 4 6 NAM selection

Sys t e m

5 1 Au to m a tic

5 2 M a n u a l

5 3 N e w s e a r c h

G a m e s

6 1 M e m o r y

6 2 Sn a k e

6 3 L o g ic

6 4 D ic e

C a lc u la t o r

C a le n d a r

K e yg u a r d

5 . Yo u r P h o n e A t o Z

A B C m o d e

This allows you to enter names into your phone book.

See “Entering letters and numbers” on page 36.

A c c e s s c o d e s

This is a security feature that allows you access to cer-

tain phone features, such as the phone lock (page 53)

and unlocked phone number (page 69).

Also, see “Lock code” on page 43 and “Security code” on

page 61.

A la r m c lo c k

The alarm clock operates off your

phone’s clock and can be set in ad-

vance to sound an alert at a

designated time. See “Clock” on

page 31 for information on your

phone’s clock.

Setting the alarm clock

1) Press 0HQX 4 2 2 (6HWWLQJV - 3KRQH VHWWLQJV - $ODUP

FORFN)

(For details on how to work the Menu, see page 13)

2) Enter time you wish to set alarm (use two-digit

fields for hours and minutes). Existing digits will be

replaced with the new alarm time.

3) Press 2.

4) Select either DP or SP and press 2.

Note: Step 4 appears only if you have selected am/pm format;

see “Selecting time format” on page 32 for more information.

When the alarm goes off

Press 6WRS to shut off the alarm.

Snoozing

Press 6QRR]H

The alarm will go off again in 10 minutes. If you let the

phone alarm for 1 minute without pressing a key, it

stops alarming for 10 minutes then starts again.

Turning the alarm clock off

1) Press 0HQX 4 2 2 (6HWWLQJV - 3KRQH VHWWLQJV - $ODUP

FORFN)

(For details on how to work the Menu, see page 13)

2) Press ^Wor V to 2II

3) Press 2.

All c a lls t im e r

This feature keeps track of how much time you have

spent on all calls with your phone.

See “Call timers” on page 29.

Au to m a tic a n s w e r

This is one of the settings in your phone’s Profiles (

see

). With this on, your phone answers incoming

page 55

voice calls after one ring.

Note: This can only be used when your phone is connected to

a headset or to an approved handsfree car kit equipped with the

ignition sense option, with the ignition on.

Activating automatic answer

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) Your phone lists each profile. Use ^Wto highlight

either the &DU or +HDGVHW profile and press 2SWLRQV.

Note: &DU and +HDGVHW will not appear in the list unless the

phone has already been connected to a car kit or headset.

3) Highlight &XVWRPL]H and press 2.. Press W to $XWR0

PDWLF DQVZHU, then press 6HOHFW again.

4) Press ^Wto 2Q and press 2.

Note: This feature will not function with data calls.

A u t o m a t ic r e d ia l

Your phone will redial the number you’re trying to call up

to 3 times after you hear a quick, busy signal. Press

to stop the call attempts.

This feature attempts to redial numbers that are busy

due to the wireless network. It will not redial numbers to

a busy party.

Activating automatic redial

1) Press 0HQX 4 1 2 (6HWWLQJV - &DOO VHWWLQJV - $XWRPDWLF

UHGLDO)

(For details on how to work the Menu, see page 13)

2) Press ^Wor V to 2Q and press 2.

C a lc u la to r

Your phone’s calculator adds, sub-

tracts, multiplies, divides, and

converts currency.

Remember! Your phone must be switched

on to use this feature. Do not switch on the

phone when wireless phone use is prohibited or when it may

cause interference or danger.

Using the calculator

1) Press 0HQX 7 (&DOFXODWRU)

(For details on how to work the Menu, see page 13)

2) With the screen that contains a “0”, enter the first

number in the calculation (press # for decimals)

3) To add, press ∗ (+ appears)

To subtract, press ∗∗ twice (ð appears)

To multiply, press ∗∗∗ (ó appears)

To divide, press ∗∗∗∗ ( / appears)

To add a decimal, press the # key

4) Enter the second number

Repeat these steps as many times as needed. Press

&OHDU to erase any mistakes.

5) Press 2SWLRQV. With (TXDOV highlighted/ press 2..

Note: You can also choose $GG, 6XEWUDFW, 0XOWLSO\, and 'LYLGH

from the list of options.

Storing exchange rates

1) Press 0HQX 7, then press 2SWLRQV

2) Press 2. at ([FKDQJH UDWH

3) Press W or V at either +RZ PDQ\ KRPH XQLWV WR D

YLVLWHG XQLW or +RZ PDQ\ YLVLWHG XQLWV WR D KRPH XQLW,

depending on how you wish to convert the cur-

rency. Press 2. once you decide.

4) Enter the appropriate exchange rate and press 2.

(use the # key for decimals)

5) Phone will display 5DWH VDYHG

Calculating exchange rates

1) Press 0HQX 7

2) Enter number of units, then press 2SWLRQV

3) Press W or V to either 7R KRPH or 7R YLVLWHG, and

press 2.

4) Converted currency will display

C a le n d a r

The calendar keeps track of re-

minders, calls you need to make,

meetings, and birthdays. It can even

sound an alarm when it’s time for

you to make a call or go to a

meeting.

Remember! Your phone must be switched on to use this fea-

ture. Do not switch on the phone when wireless phone use is

prohibited or when it may cause interference or danger.

Note: Your phone must remain on to use the calendar’s alarm

feature. If your phone is off, the alarm will not sound at its

scheduled time.

Using the calendar

1) Press 0HQX 8 (&DOHQGDU)

(For details on how to work the Menu, see page 13)

2) If you haven’t set the time and date, your phone

prompts you to set your phone’s clock

When your phone prompts you for the time with

KK=PP, enter the time in hours and minutes (using

two-digit fields), then press 2.

Time format (24-hour or am/pm) is set using the Clock. See

“Selecting time format” on page 32.

When your phone prompts you for the date with

PP2GG2\\\\, enter the month and day (using two-

digit fields) and year (using a four-digit field), then

press 2..

Tip: Use W to move the cursor right and V to move it

left. When you enter a digit, it writes over the number to

the right of the cursor.

3) Your phone displays the current day. You can also

scroll to different days by pressing ^Wor V.

4) Once you’re at the date you want, press 2SWLRQV.

Then use ^Wto highlight the option you want, and

press 6HOHFW1 The options are:

Option 1: View day

With this option, you can view the notes of the day

currently on display.

Use ^Wto scroll through the notes. Each note allows you

to choose the following 2SWLRQV:

(UDVH clears the note from your calendar.

(GLW gives you the same prompts you got when you

made the note.

0RYH gives you the date prompt so you can move the

note to another date.

Option 2: Make note

With this option, you’ll need to choose 5HPLQGHU, &DOO,

0HHWLQJ, or %LUWKGD\. Your phone will prompt you for

more information depending on which one you choose.

You can also set an alarm for any calendar note.

See “Entering letters and numbers” on page 36 for help with

entering information at the 6XEMHFW= prompt.

Note: When the alarm goes off, you can press 3RVWSRQH or 2..

Press 2. to shut off the alarm.

Option 3: Erase notes

With this option, you’ll need to choose which notes to

erase. If you choose all the notes for the day currently

on display (2I &KRVHQ 'D\), or 2QH %\ 2QH (for all notes in

the calendar), your phone presents each note to you

with the option (UDVH or %DFN.

If you choose $OO DW 2QFH, your phone will delete all cal-

endar notes. When prompted to confirm the erase,

press <HV or 1R.

Option 4: View all

This allows you to view the notes of the entire calendar.

Use ^Wor V to scroll through the notes. &DOHQGDU PHPRU\

HPSW\ will appear if there are no notes in the calendar.

Option 5: Go to date

Enter the date you wish to go to.

Option 6: Set the date

Enter the day and month (using two-digit fields) and

year (using a four-digit field), then press 2..

C a lle r ID

This is a network service that helps identify incoming

calls. Contact your service provider for details.

When Caller ID is active, phone may display the

your

caller’s phone number. The caller’s name may also dis-

play if their name and number has been stored in the

phone book (see “Phone book” on page 50) or if the

wireless network supports it.

&DOO or &DOO0FDOOHU ,' XQDYDLODEOH will display when the wire-

less network doesn’t recognize the calling number.

Also, &DOO0FDOOHU ,' EORFNHG may display if the calling party

has blocked caller ID.

C a llin g c a r d

If you wish to use a calling card for

long distance calls, you must first

store your calling card information

into your phone. Your phone can

store up to four calling cards.

Programming a calling card

1) Press 0HQX 4 1 3 (6HWWLQJV - &DOO VHWWLQJV - &DOOLQJ FDUG)

(For details on how to work the Menu, see page 13)

2) Press ^Wor V to desired calling card, press 2SWLRQV

3) Press W or V to (GLW, press 2.

4) Enter security code and press 2.

5) Press 6HOHFW at 'LDOLQJ VHTXHQFH. Select the dialing

sequence your card uses (use chart below), press

W or V to choose sequence, then press 6HOHFW.

Note: The order of the following steps may vary, depending on

which dialing sequence your card uses.

6) Enter access number when prompted for the call-

ing card’s access number (usually the 1-800 num-

ber listed on the back of the calling card), press 2.

Note: You can also retrieve the access number from your phone

book if it has already been stored. Simply press 6HDUFK, then W

or V to find the number.

7) Enter card number and/or PIN when prompted to

enter calling card number and personal identifica-

tion number, then press 2.1 Press 2. again at 6DYH

FKDQJHV?

8) Press ^Wor V to &DUG QDPH and press 6HOHFW. Enter

card name using your phone’s keypad, press 2..

See “Entering letters and numbers” on page 36 if you need

help on entering the card name

For details about your phone’s security code, see “Security

code” on page 61.

C a r d s

u s in g t h is

s e q u e n c e *

D ia lin g

Se q u e n c e

Us e fo r c a r d s t h a t

r e q u ir e yo u t o :

$FFHVV QR1

Dial 1-800 access number,

MCI, AT&T True

. SKRQH QR1

. FDUG QR1

then phone number, then card Choice, Sprint

number (+ PIN if required)

Canada, Unitel

$FFHVV QR1

. FDUG QR1

. SKRQH QR1

Dial 1-800 access number,

then card number (+ PIN if

required), then phone number

networkMCI,

WorldPhone MCI

3UHIL[

Dial the prefix (any numbers

GTE, PacBell,

. SKRQH QR1

. FDUG QR1

that must precede the phone AT&T, Stentor

number) and phone number

you want to dial, then card

number, (then PIN, if required)

*These calling cards are frequently used with these dialing se-

quences. However, they may vary and are subject to change at

the phone company’s discretion.

Choosing a calling card to use

1) Press 0HQX 4 1 3 (6HWWLQJV - &DOO VHWWLQJV - &DOOLQJ FDUG)

2) Press ^Wor V to desired card, press 2SWLRQV

3) Press W or V to highlight 6HOHFW and press 2.

4) Enter security code at 6HFXULW\ FRGH=, press 2.

5) Your phone will display &DUG UHDG\ IRU XVH

Making calling card calls

Enter the phone number, including any prefix (such as

0 or 1) that your calling card may require when you

make a calling card call. See your calling card for

instructions.

Press and hold

displays &DUG FDOO.

for a few seconds until your phone

Press 2. when you see :DLW IRU WRQH/ WKHQ SUHVV 2..

When you see :DLW IRU WRQH/ SUHVV 2. DJDLQ, press 2.

again.

Note: This procedure may not apply to all calling card options

programmed into your phone. Please look at the back of your

calling card or contact your long distance company for more

information.

C a ll fo r w a r d in g

This network service is used to forward incoming calls

to another number so you won’t miss an important call.

Check with your service provider for details.

Note: Before you can activate this feature, you should first store

the feature code given to you by your service provider. Other-

wise, this feature may not appear in the menu.

However, you can use the feature code manually, if you choose,

by including the feature code in front of the phone number

(e.g., ó72 555 1212)

See “Network feature setting” on page 47 for more details.

1) Press 0HQX 4 4 2 (6HWWLQJV - 1HWZRUN VHUYLFHV - &DOO

IRUZDUGLQJ)

(For details on how to work the Menu, see page 13)

2) Press ^Wor V to desired call forwarding feature (

see

)

options below

3) Press 6HOHFW

4) Highlight $FWLYDWH and press 2.

5) Enter phone number at 1XPEHU= (or press 6HDUFK to

locate number in phone book) and press 2.

6) Your phone will attempt to call the network to con-

firm the feature code you entered in Menu 4 4 5

(see “Network feature setting” on page 47)

7) Once the feature code had been confirmed, the

feature is activated

Call forwarding options

)RUZDUG DOO FDOOV forwards all incoming calls.

)RUZDUG LI EXV\ forwards calls only when you’re on the

phone.

)RUZDUG LI QRW DQVZHUHG forwards calls if you don’t

answer.

)RUZDUG LI RXW RI UHDFK forwards calls if you are out of the

serving wireless network.

&DQFHO DOO FDOO IRUZDUGLQJ cancels all call forwarding

options you have active.

C a ll lo g

This feature automatically keeps

track of numbers you’ve dialed,

numbers that have called you, and

the amount of time you’ve spent on

calls.

Using call log

1) Press 0HQX 2 (&DOO ORJ)

(For details on how to work the Menu, see page 13)

2) Press ^Wto reach one of the following options, then

press 6HOHFW or 2.

2-1 0LVVHG FDOOV - See page 46.

2-2 'LDOHG FDOOV - See page 34.

2-3 5HFHLYHG FDOOV - See page 56.

2-4 &OHDU FDOO OLVWV - See page 301

2-5 &DOO WLPHUV - See page 29.

Tip: You can dial any of the phone numbers by pressing

while the number is on the display.

The ‘Options’ soft key

When you access 'LDOHG FDOOV, 5HFHLYHG FDOOV, or 0LVVHG

FDOOV and press 2SWLRQV, a list of options will appear on

your phone’s display.

&DOO WLPH shows the date and time when the call was first

connected (if clock has been set).

(GLW QXPEHU allows you to edit the dialed number.

6DYH allows you to save the number into your phone

book.

(UDVH will erase the number from the call list.

9LHZ QXPEHU will appear only if the number has been

stored in the phone book and the name is displayed

instead of the number.

C a ll s e tt in g s

This feature allows you to access and activate some of

your phone’s features.

Using call settings

1) Press 0HQX 4 1 (6HWWLQJV - &DOO VHWWLQJV)

(For details on how to work the Menu, see page 13)

2) Press ^Wto reach one of the following options, then

press 6HOHFW

4-1-1 (PHUJHQF\ NH\ < - See page 35.

4-1-2 $XWRPDWLF UHGLDO - See page 20.

4-1-3 &DOOLQJ FDUG - See page 24.

C a ll tim e r s

Your phone automatically keeps

track of the amount of time you’ve

spent in calls.

1) Press 0HQX 2 5 (&DOO ORJ - &DOO

WLPHUV)

(For details on how to work the Menu, see page 13)

2) Press ^Wrepeatedly to show duration of the follow-

ing options

/DVW FDOO displays call duration of last call.

$OO FDOOV displays call duration of all calls made since

timers have last been reset (

see page 31 for details

on how to clear call timers

/LIH WLPHU shows duration of all calls; this can not be

reset (see ).

page 42

&OHDU WLPHUV clears all call timers except the Life

timer ( ).

see page 31

These call durations are for the currently-selected NAM

(phone number). Your phone has separate timers for

each NAM your phone uses.

See “NAM selection” on page 46 for details on NAM.

Note: The actual time invoiced for calls by your service provider

may vary, depending upon items such as network features,

rounding off for billing, and taxes.

C a ll w a it in g

If you have subscribed to Call Waiting, your phone will

beep during a call let you know you have an incoming

call. Your phone may also display the incoming caller’s

identification (

see “Caller ID” on page 24

Press

^Answerinó^{g an incoming call with call waiting}

Swapping between two calls

Press

Ending the calls

Press to end both calls

Activating call waiting

You can also activate this feature with your phone; sim-

ply ask your service provider for the feature code, store

it into your phone, then activate it.

Note: This feature may not appear in your phone’s menu until

the feature code has been stored.

See “Network feature setting” on page 47 for more details.

1) Press 0HQX 4 4 3 (6HWWLQJV - 1HWZRUN VHUYLFHV - &DOO

ZDLWLQJ)

(For details on how to work the Menu, see page 13)

2) Press ^Wto $FWLYDWH (or select &DQFHO to cancel)

3) Press 2.

4) Your phone will attempt to call the network to con-

firm the feature code you entered in Menu 4 4 5

(

)

see “Network feature setting” on page 47

5) Once the feature code had been confirmed, the

feature is activated

C h a n g e lo c k c o d e

This feature allows you to change your lock code.

See “Changing your lock code” on page 43.

C h a n g e s e c u r it y c o d e

This feature allows you to change your security code.

See “Changing your security code” on page 62.

C le a r c a ll lis ts

This feature will clear all dialed numbers, as well as

numbers of answered calls and missed calls. You can

not undo this operation, so be careful.

Also, see “Call log” on page 27.

1) Press 0HQX 2 4 (&DOO ORJ - &OHDU FDOO OLVWV)

(For details on how to work the Menu, see page 13)

2) Highlight either $OO, 0LVVHG, 'LDOHG, or 5HFHLYHG and

press 2. ($OO will clear all call lists, while the others

clear their respective call lists)

C le a r t im e r s

This feature clears all call timers for the currently-selected

NAM.

See “Call timers” on page 29 for more details

1) Press 0HQX 2 5 4 (&DOO ORJ - &DOO WLPHUV - &OHDU WLPHUV)

(For details on how to work the Menu, see page 13)

2) Enter security code at 6HFXULW\ FRGH= and press 2.

Careful: Clearing call timers can not be undone. If you are

using the call timers to log or track the amount of time you are

using your phone, you may wish to record the call timers before

you erase them.

Note: The Life timer contains important warranty information

and can not be reset. See “Life timer” on page 42 for details.

C lo c k

Your phone has an internal clock

that can be displayed or hidden.

It also features an alarm clock (

see

page 18

Note: The clock is powered by your

phone’s battery. If your clock has been activated and you re-

move the battery while your phone is still on, you will need to

reset the time after you turn your phone back on.

However, if you first turn your phone off before removing the

battery, your phone will retain the time and date it had before

the battery was removed.

Setting the clock

1) Press 0HQX 4 2 1 (6HWWLQJV - 3KRQH VHWWLQJV - &ORFN)

(For details on how to work the Menu, see page 13)

2) Press ^Wto $GMXVW WLPH, press 6HOHFW

3) Enter present time at 7LPH= (use two-digit fields for

hours and minutes)

4) Press 2.

5) Select DP or SP and press 2. (if am/pm format has

been selected; see below)

Selecting time format

1) Press 0HQX 4 2 1 (6HWWLQJV - 3KRQH VHWWLQJV - &ORFN)

(For details on how to work the Menu, see page 13)

2) Press ^Wto 7LPH IRUPDW and press 6HOHFW

3) Press W to either 570KRXU or DP2SP

4) Press 2.

Displaying or hiding the clock

1) Press 0HQX 4 2 1 (6HWWLQJV - 3KRQH VHWWLQJV - &ORFN)

(For details on how to work the Menu, see page 13)

2) Press ^Wto either +LGH FORFN or 'LVSOD\ FORFN (only one

will display depending on the current setting)

3) Press 6HOHFW

C o n fe r e n c e c a ll

This feature allows you to add a third party to a call. You

can use this feature with local and long distance calls.

Note: This feature may not be available in all systems. See your

service provider for details and availability.

Making a conference call

the second phone number and press

^{While in a call, enter (or recall from the}ó^{phone book)}

2) Once the third party answers, press

to con-

nect all three parties

3) Press

again if you wish to disconnect the third

party. Press

to drop both parties.

Recalling a number from the phone book

1) During the call, press 2SWLRQV

2) Press W or V to 1DPHV and press 2.

3) Press 6HOHFW at 6HDUFK

4) Enter name and press 2., or just press W or V to

scroll through the phone book

5) Press

C u r r e n t c a ll tim e r

This feature displays the running elapsed time on your

screen while a call is active. Once the call has ended,

simply press any key to clear the display.

Also, see “Call timers” on page 29.

Activating the current call timer

1) Press 0HQX 2 5 (&DOO ORJ - &DOO WLPHUV)

(For details on how to work the Menu, see page 13)

2) With /DVW FDOO displayed, press 'HWDLOV

3) With &XUUHQW FDOO WLPHU displayed, press 6HOHFW

4) Press W or V to 2Q, press 2.

C u s t o m e r c a r e c o n t a c t n u m b e r

With the press of a single button, you can quickly

attempt calls to your service provider. This feature can

be helpful if you’re having difficulties dialing a number,

especially when traveling outside your home area.

Simply press and hold the 2 key and your phone will

attempt to call a customer care operator in the area.

Note: This may not be available on all systems. Contact your

service provider for availability.

C u s t o m ize p r o file s

This feature allows you to customize individual Profiles.

See “Profiles” on page 55 for details.

D ia le d c a lls

Your phone automatically stores the

last 10 numbers you’ve dialed.

1) Press 0HQX 2 2 (&DOO ORJ - 'LDOHG

FDOOV)

(For details on how to work the Menu, see page 13)

2) Press ^Wor V

3) Press

to dial the number you wish to call

You can also access the last 10 dialed numbers if you

^pressó, then quickly press W or V to scroll through

the list.

Also, see “Call log” on page 27 for details on other call lists.

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 28

Ea r p ie c e v o lu m e

The scroll keys on

phone will adjust the earpiece

your

volume during a phone call. The top scroll key increases

while the bottom one decreases the volume.

If an accessory like a headset or a car kit, or one with its

own loudspeaker, is connected to your phone, the

scroll keys will adjust the volume for that accessory.

Note: Using the scroll keys to adjust earpiece volume functions

only during phone calls.

Em e r g e n c y c a lls

Before attempting any emergency calls, see “Emergency

Calls” on page 81 for important safety information.

1) If the phone is not on, switch it on

2) Key in the emergency number for your present

location (e.g. 911 or other official emergency

number). Emergency numbers vary by location.

3) Press

IMPORTANT!

This phone, like any cellular phone, operates using radio

signals, cellular and landline networks, as well as user-pro-

grammed functions which can not guarantee connection in all

conditions. Therefore, you should never rely solely upon any

cellular phone for essential communications (e.g., medical

emergencies).

Remember, to make or receive any calls, the phone must be

switched on and in a service area with adequate cellular signal

strength.

Emergency calls may not be possible on all cellular phone net-

works or when certain network services and/or phone features

are in use. Check with local cellular service providers.

If certain features are in use (keyguard, restrict calls, etc.), you

may first need to turn those features off before you can make an

emergency call. Consult this document and your local cellular

service provider.

When making an emergency call, remember to give all the nec-

essary information as accurately as possible. Remember that

your cellular phone may be the only means of communication

at the scene of an accident - do not cut off the call until given

permission to do so.

Em e r g e n c y k e y 9

emergency call when you press 9, then

dials the emergency number pre-programmed into your

phone.

^{With this feature on, the phone attemp}ó^{ts to make an}

. The phone

Note: You can also dial an emergency call by pressing and

holding 9 until the phone indicates it is attempting to make an

emergency call. However, this method does not work when

Keyguard is active or when the phone is connected to a

modem.

Activating Emergency key 9

1) Press 0HQX 4 1 1 (6HWWLQJV - &DOO VHWWLQJV - (PHUJHQF\

NH\ <)

(For details on how to work the Menu, see page 13)

2) Press ^Wto 2Q or 2II, then press 2.

IMPORTANT!

Official emergency numbers vary by location (e.g. 911). Only

one emergency number is programmed into your phone to be

dialed automatically by Emergency key 9, which may not be the

proper number in all circumstances.

En t e r in g le t te r s a n d n u m b e r s

You can enter letters, as well as numbers, when storing

information into your phone by using your phone’s key-

pad. When you see the letter you wish to enter, simply

press the key associated with that letter until it appears

on the display (numbers also appear).

ABC mode

When you need to enter letters into your phone, it will

automatically switch over to

mode.

Your phone displays the

icon to indicate that your

phone is in ABC mode. It also displays when you are

viewing names rather than numbers.

When

is displayed, you can enter these

characters:

K e y C h a r a c t e r s K e y

C h a r a c te r s

PQRS7

.,?!-1

ABC2

DEF3

GHI4

∗

TUV8

WXYZ9

Enters an empty space, 0

(See below for details)

JKL5

MNO6

Changes letter case; long

press accesses 123 mode

While you’re editing a name, the ^Vkey will move the

cursor to the left, and ^Wwill move it to the right. Press

&OHDU to correct any mistakes.

If you wish to enter an empty space between charac-

ters, press 0 for each space.

Changing letter case

Press the # key to switch between upper and lower

case letters. The

icon will switch to

indicate you are using lower case.

123 mode

When storing names to the phone book, you can enter

a number within a name at any time. Simply press that

particular number key a few times until it appears.

However, you can do this more quickly by accessing

the

mode, without having to scroll through each

letter to access the number you wish to enter.

Simply press the # key for about 2 seconds while in

mode and the

mode, only numbers can be entered. Letters can not be

entered unless your phone is in mode.

icon will appear. While in this

Press the # key again for a couple of seconds if you

wish to deactivate the mode.

Special characters (for storing names)

When in ABC mode (see page 18), you can press the ∗

key and the following special characters will appear.

You can use these characters to help when storing

names in your phone book. Simply press ^Wor V to

highlight the one you wish to use and press ,QVHUW.

. , ? ! : ; - + # ó ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥

TIP: If you wish to access a special character that ap-

pears toward the end of this list, press ^Vfor quicker

access.

Special Characters (for storing numbers)

The following special characters are helpful when you

store names to your phone book (see page 50). Simply

press the ó key once or repeatedly, and the following

characters can be stored within the number sequence.

(S) creates a pause when a number is dialed; the

digits located to the right of the “S” are automati-

cally sent as touch tones after a 2.5 second pause

(see page 67).

(Z) creates a “wait” when a number is dialed. The

“Z” makes your phone wait for you to press 6HQG or

ó, then it sends the digits located to the right of

the “w” as touch tones (see page 67).

You can add as many special characters as you need

in a single number sequence. These characters can not

be entered while in

mode.

Er a s in g s t o r e d n a m e s a n d n u m b e r s

See “Erasing stored names and numbers” on page 53

Er a s in g yo u r e n t ir e p h o n e b o o k

See “Erasing your entire phone book” on page 53

G a m e s

Challenge yourself or a friend to four exciting games in

your phone. In the main menu scroll down to *DPHV and

press 6HOHFW, or just press 0HQX 6, and choose one of the

following games:

REMEMBER! Your phone must be switched on to use this func-

tion. Do not switch on the phone when wireless phone use is

prohibited or when it may cause interference or danger.

Memory

Reveal pictures to find pairs in as few tries as possible.

Move the cursor with the 2 (up), 4 (left), 6 (right), and 8

(down) keys. Press the 5 key to reveal pictures. Press

the # key to jump right over revealed pictures or move

from top left to bottom right. Press the ∗ key to jump left

over revealed pictures or move from bottom right to top

left. Once found, pairs stay visible.

Snake

Feed the snake with as many goodies as possible and

watch it grow. Use keys 2, 4, 6, and 8 to turn the snake

toward food. The longer the snake’s tail grows, the

higher the score. If the snake hits its own tail or the

surrounding wall, the game is over.

Logic

Find a secret combination of figures. Available figures

are shown at the top of the display before you accept

the first guess row. Use the 2, 4 and 8 keys to move the

cursor and the 5 key to select the figure. To copy a

figure from a previously accepted guess row, start

scrolling with the 4 key, move the cursor to the desired

figure in the normal way and accept the selection with

the 5 key.

Once you think you have the right combination, press

the ó key. The result is presented as a set of marks over

the row. A correct figure in the right place gives a full

mark; a correct figure in the wrong place gives a half

mark. The game ends when all the figures are correct

and in the right place.

Dice

Use this to play other games that require a set of dice if

one isn’t available. Use the /HYHO option to set the num-

ber of dice, up to six. You can roll, lock, and unlock each

die as many times as you wish.

When you start a new game, the dice roll for a couple of

seconds and then stop. Use the 4 (left) and 6 (right) keys

to select a die. Press the 5 key to lock or unlock the

selected die.

Press ∗ to roll the unlocked dice again.

Game options

When you select a game, you can choose from the

following submenus:

/HYHO allows you to choose the level of difficulty.

1HZ JDPH starts a new game.

7RS VFRUH will display the top score (does not appear in

Logic).

,QVWUXFWLRQV will describe how the game is played.

Note: /DVW YLHZ or &RQWLQXH may appear in the options list if a

game is interrupted, not finished, or if you have lost the game.

In b o x

When you receive a text message, it’s stored in the In-

box. Your phone will display 0HVVDJH UHFHLYHG, along with

the text message icon, and makes a sound (

depending

on the message alert tone; see page 45

Please see “Text messages and pages” on page 65 for more

details on this feature.

K e yg u a r d

This feature helps protect the keypad against accidental

keypresses.

See “Keyguard” on page 11 for more details.

K e yp a d c o v e r s e t t in g

This feature activates the keypad cover if you wish to

answer and end calls with the keypad cover.

See “Using the keypad cover” on page 10 for details.

K e yp a d to n e s

This is one of the settings in your phone’s Profiles (

see

). It sets the volume of the tone you hear when

page 55

you press your phone’s keys.

Note that if you choose the 6LOHQW profile, keypad tones

will be turned off.

Setting the keypad tones

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) Your phone lists each profile. Use ^Wto highlight the

one you want to set the keypad tones for and

press 2SWLRQV.

3) Highlight &XVWRPL]H and press 2.. Press W to

.H\SDG WRQHV and press 6HOHFW.

4) Press ^Wto scroll through the options; your phone

plays a sample of each. Press 2. for the one you

want.

L a n g u a g e

Because many wireless phone cus-

tomers speak English as a second

language, your phone allows you to

choose your phone’s displayed

language.

Choosing a language for your phone

1) Press 0HQX 4 2 5 (6HWWLQJV - 3KRQH VHWWLQJV - /DQJXDJH)

(For details on how to work the Menu, see page 13)

2) Use ^Wor V to select the language you wish to use

and press 2.

You can choose from English, French, Spanish, or

Portuguese.

L a s t c a ll t im e r

This feature displays the duration of your last call.

See “Call timers” on page 29.

L a s t n u m b e r r e d ia l

When you want to call your last dialed number,

Press

and wait 3 seconds

Note: You must be at the start screen before you press

L e tt e r c a s e

You can change from upper to lower case when

entering letters into your phone.

See “Changing letter case” on page 37 for more details.

L ife tim e r

The life timer displays the total time of all calls dialed and

received with your phone (in hours and minutes only).

The life timer can not be reset and is used in conjunction

with your phone’s warranty.

Also, see “Call timers” on page 29

L ig h t s

This is one of the settings in your phone’s &DU Profile

). This feature determines whether the

(

see page 55

lights are on only when you use your phone, or if they

are on at all times. This setting works only when your

phone is connected to a car kit.

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) Your phone lists each profile. Use ^Wto highlight &DU

and press 2SWLRQV.

Note: &DU will not appear in the list until the phone has been

connected to a car kit at least one time.

3) Highlight &XVWRPL]H and press 2.. Press W to

highlight /LJKWV and press 6HOHFW.

4) Use ^Wto scroll through your choices and press 2.

If you select $XWRPDWLF, your phone’s lights are turned off

within fifteen seconds if no keys are pressed. If 2Q is se-

lected, then the lights will remain on the entire time your

phone is connected to the car kit.

L is t e n t o v o ic e m e s s a g e s

Also, see “Voice messages” on page 70

With 1HZ YRLFH PHVVDJH on display,

Press /LVWHQ

Press

Listening to voice messages anytime

If you don’t wish to listen to voice messages as you get

them, you can access them later.

Simply press 0HQX 1 2 1 or press and hold the 1 key to

call your voice mailbox.

Note: To receive messages from your voice mailbox, your voice

mailbox number must first be stored in your phone. See “Voice

mailbox number” on page 70 for details.

L o c k c o d e

You’ll need the lock code to activate and deactivate

Phone Lock (see ), or to change your lock

page 52

code. The default lock code is 1234. If you enter an

incorrect lock code five times in a row,

prompt you for the security code (see

phone will

your

page 61

Changing your lock code

In a lock code, only numeric characters are accepted.

1) Enter 0HQX 4 3 2 3 (6HWWLQJV - 6HFXULW\ VHWWLQJV - $FFHVV

FRGHV - &KDQJH ORFN FRGH)

(For details on how to work the Menu, see page 13)

2) Enter lock code at (QWHU ORFN FRGH= and press 2.

3) Enter new lock code, press 2.

4) Verify new lock code, press 2.

Note: When you change your lock code, make sure you store it

in a safe place, away from your phone. Avoid entering access

codes similar to emergency numbers to prevent accidental

emergency calls.

M a n u a l t o u c h to n e s

This setting determines how long touch tones are pro-

duced as you press the keys on the keypad. Note that

touch tones are sometimes called DTMF tones.

See “Touch tones” on page 67 for details.

Setting manual touch tones

1) Press 0HQX 4 2 3 1 (6HWWLQJV - 3KRQH VHWWLQJV - 7RXFK

WRQHV - 0DQXDO WRXFK WRQHV)

(For details on how to work the Menu, see page 13)

2) Use ^Wor V to highlight one of the following

options, then press 2.

&RQWLQXRXV means the tone sounds for as long as you

press and hold the key.

)L[HG sets the tone length to .1 second, regardless of

how long you press the key.

2II turns the tones off, and no tones will be sent when

you press the keys.

M e m o r y s t a t u s

This feature allows you to see how many free and in-use

memory locations are in your directory.

Also, see “Phone book” on page 50.

At the start screen,

1) Press 1DPHV

2) Press W or V to 2SWLRQV and press 6HOHFW

3) Press W or V to 0HPRU\ VWDWXV

4) Press 6HOHFW

M e s s a g e s

This feature allows you to access your voice and text

messages, as well as composing your own welcome

note.

Using messages

1) Press 0HQX 1 (0HVVDJHV)

(For details on how to work the Menu, see page 13)

2) Press ^Wto reach one of the following options, then

press 6HOHFW

1-1 7H[W PHVVDJHV -

1-2 9RLFH PHVVDJHV -

1-3 :HOFRPH QRWH -

See page 65

See page 70

See page 72

M e s s a g e a le r t t o n e

This is one of the settings in your phone’s Profiles (

see

). It sets the tone that your phone makes when

page 55

you get a text message.

Also, see “Text messages and pages” on page 65

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) Your phone lists each of the 5 profiles. Use ^Wto

highlight the one you want to set the message alert

tone for and press 2SWLRQV.

3) Highlight &XVWRPL]H and press 2.. Press ^Wto high-

light 0HVVDJH DOHUW WRQH, then press 6HOHFW.

4) Use ^Wto scroll through your choices (your phone

plays samples) and press 2..

M ic r o p h o n e

You can mute and unmute your phone’s microphone

while a call is in progress. During a call, your phone’s

softkeys change from 1DPHV and 0HQX to 2SWLRQV and

0XWH.

Muting and unmuting your phone

You can mute the phone’s microphone during a call;

simply press 0XWH. To unmute the microphone, press

8QPXWH.

If these texts are not available, press 2SWLRQV, scroll to

0XWH or (QG PXWH and press 6HOHFW.

Muting and unmuting also affect the microphones of

any accessories connected to the phone.

M is s e d c a lls

Your phone will keep track of the last 10 calls you have

missed, either if you weren’t around to answer the call,

were out of the service area, or if your phone was off.

If the display says ‘Missed calls’

Press /LVW. To call back the displayed number, press

ó. Press ([LW to go back to the start screen.

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 28

Checking the missed calls list anytime

At the start screen,

Press 0HQX 2 1 (&DOO ORJ - 0LVVHG FDOOV), then W

(For details on how to work the Menu, see page 13)

This shows you the phone numbers of the 10 most

recent calls you’ve not answered.

When the )RUZDUG LI QRW DQVZHUHG option in the Call

Forwarding feature (

) is selected, your

see page 26

phone treats the forwarded calls as missed calls.

Also, see “Call log” on page 27 for details on other call lists.

N AM s e le c t io n

The service provider programs your phone with the

phone number and system information into your

phone’s memory when your phone is first activated.

This is called a Number Assignment Module (NAM).

For example, your phone can be activated in up to 3

different service areas (e.g. one in Dallas, another in

Chicago, and maybe one more in New York), each giv-

ing your phone a different phone number or account.

Only one number can be active at a time. When you

select a phone number, you’re also selecting which

system you’re using as your home system (see “Sys-

tem” on page 64). The first phone number displayed

with this menu is the currently selected number.

Note: It is not necessary to have three NAMs for your phone if

your service provider has service or roaming agreements for

each area in which you wish to use your phone. Contact your

service provider for details.

Selecting the NAM for your phone

1) Press 0HQX 4 4 6 (6HWWLQJV - 1HWZRUN VHUYLFHV - 1$0

VHOHFWLRQ)

(For details on how to work the Menu, see page 13)

2) Use ^Wor V to highlight the phone number you

want to use and press 2.

Note: You need at least one active number to make calls.

You can not change from one NAM to another during a call.

N e t w o r k fe a t u r e s e t t in g

Call forwarding (page 26), Call waiting (page 29) and

Send own number (page 62) are network services

available through your service provider or dealer.

When you subscribe to any of these services, your

service provider or dealer gives you a separate feature

code to activate each service. Deactivation codes are

used to deactivate each service.

Once you store the appropriate code in your phone, the

service appears as a menu item. You can then use the

menu to activate and deactivate these services.

Note: Storing feature codes apply only to NAM 1.

Storing codes

1) Press 0HQX 4 4 5 (6HWWLQJV - 1HWZRUN VHUYLFHV -

1HWZRUN IHDWXUH VHWWLQJ)

(For details on how to work the Menu, see page 13)

2) At )HDWXUH &RGH=, enter the feature code or deactiva-

tion code received from your dealer (e.g. ∗74,

∗740, etc.), press 2.

3) W to the service that the code applies to and press

6HOHFW

4) W to suboption, then 6HOHFW (Repeat step as

required, based on number of suboptions)

(Use step four only for call forwarding options)

5) W to $FWLYDWH or &DQFHO, then press 2.

Removing items from the menu

Follow the steps in ‘Storing codes’, but press 2.

after the )HDWXUH FRGH= prompt (without entering a

code). Then highlight both $FWLYDWH and &DQFHO for

each feature you wish to remove, and press 2..

Note: This feature does not deactivate these services, it

only removes them from the menu.

N e t w o r k s e r v ic e s

Most of the features in this menu are network services

that require a subscription. See your service provider for

details and availability.

4-4-1 9RLFH SULYDF\ -

See page 71

4-4-2 &DOO IRUZDUGLQJ - -

See page 26.

4-4-3 &DOO ZDLWLQJ - -

See page 29

4-4-4 6HQG RZQ QXPEHU - -

See page 62

4-4-5 1HWZRUN IHDWXUH VHWWLQJ -

See page 47

4-4-6 1$0 VHOHFWLRQ -

See page 46

- These features will not appear in the menu unless they are ac-

tivated using 1HWZRUN IHDWXUH VHWWLQJ. See “Network feature

setting” on page 47 for details.

O n e -t o u c h d ia lin g

This feature allows you to make phone calls quickly and

easily with the touch of a button.

But first...

You must store names and numbers in your phone

book (see page 51) before you can use this feature.

Then you can assign a name from the phone book to a

one-touch dial location using your phone’s keys 2

through 8.

Note: Keys 1 and 9 are used exclusively for dialing your voice

mailbox (see page 70) and for attempting emergency calls (see

page 81) to the emergency number programmed into your

phone (e.g. 911 or other official emergency number). The 2 key

is for dialing a customer care operator (see page 33), which can

be overwritten if you prefer.

Assigning one-touch dial locations

At the start screen,

1) Press 1DPHV

2) Press W or V to highlight 40WRXFK GLDOLQJ

3) Press 6HOHFW

4) Press W or V to next available empty location,

+HPSW\, will appear

5) Press $VVLJQ

6) Press W or V to select desired name and press 2.

7) Repeat as necessary

Calling a number using one-touch dialing

Press and hold the key (2 through 8) for a few sec-

onds to call the number in the corresponding one-

touch dial location.Your phone recalls the phone

number from the memory, displays it briefly, then

dials it.

Note: If you press and hold 1, your phone calls your voice mail-

box. If you press and hold 9, and emergency key 9 (Menu 4 1)

is 21, your phone attempts a call to the emergency number pro-

grammed into your phone (e.g. 911 or other official emergency

number). The 2 key is for dialing a customer care operator,

which can be overwritten if you prefer.

Changing numbers in one-touch dial list

With this feature, you can assign a different number to

any one-touch dial location.

At the start screen,

1) Repeat steps 1 through 3 in “Assigning one-touch

dial locations”

2) Press ^Wor V to select location you wish to change

3) Press 2SWLRQV

4) Press W or V to &KDQJH, then press 6HOHFW

5) Press W or V to select different name for location

and press 2.

Erasing one-touch dial locations

1) Repeat steps 1 through 3 in “Assigning one-touch

dial locations”

2) Press ^Wor V to select location you wish to erase

3) Press 2SWLRQV

4) Press W or V to (UDVH, then press 6HOHFW

5) Press 2. at (UDVH"

P a g in g

You can receive pages with your phone.

See “Text messages and pages” on page 65.

P h o n e b o o k

You can store up to 199 numbers and associated

names in your phone’s memory. These numbers are

right at your fingertips for easy dialing.

Things to know about the phone book

Stored numbers may be up to 32 digits long.

Stored names may be up to 16 characters long.

You can not store identical names into your phone

(i.e., John, John); make sure that like names are

somewhat different in the phone book (i.e., John,

Johnny). 5HSODFH" followed by the currently stored

name displays when storing a name already in

memory.

Accessing the phone book

At the start screen,

1) Press 1DPHV

2) Press W or V to highlight desired submenu

3) Press 6HOHFW

About the submenus

The phone book has several submenus from which you

can choose.

6HDUFK allows you to search for a specific name.

$GG QHZ allows you to enter new names and numbers.

2SWLRQV lets you choose your scrolling view, as well as to

show memory status.

40WRXFK GLDOLQJ allows you to assign up to seven one-

touch dial locations (see page 48 for details).

(UDVH DOO lets you erase every name and number in your

phone book. You can erase one name and number at a

time by pressing 'HWDLOV, then 2SWLRQV when viewing a

name already in the directory.

Storing a name and number

1) Press 1DPHV

2) Scroll to $GG QHZ and press

6HOHFW

3) Enter name using the keypad

(use # to switch between

upper and lower case) and press 2.

4) Enter phone number and press 2.

Also, see “Entering letters and numbers” on page 36 and

“Quick save” on page 64.

Changing a number stored with a name

1) Recall stored name, then press 'HWDLOV to view

number

2) Press 2SWLRQV, scroll to (GLW and press 6HOHFW

3) Press 2. while name is displayed, unless you wish

to change it. If so, press and hold &OHDU, re-enter

name and press 2.

4) Press and hold &OHDU to erase number or use the W

and ^Vkeys to edit

5) Enter new number

6) Press 2. to save new number

Recalling names & numbers

Retrieving names and numbers from the phone book is

easy to do.

At the start screen,

1) Press ^Wor V to view names in directory

2) Scroll to the person you wish to call

3) Press

to dial the number (phone will display

number dialed to confirm)

Recalling numbers by name

You can easily find a specific name stored in the phone

book.

At the start screen,

1) Press 1DPHV

2) Press the number on the keypad with the corre-

sponding first letter of the name you wish to call

Note: If you only entered the first letter of the name and

there are several names beginning with the same letter,

press W or V until the desired name appears.

Erasing stored names and numbers

1) Recall stored name

2) Press 'HWDLOV

3) Press 2SWLRQV

4) Highlight (UDVH, then press 6HOHFW, then 2.

Note: You can not undo Erase functions, so be careful!

Erasing your entire phone book

1) Press 1DPHV

2) Press W to highlight (UDVH DOO

3) Press 6HOHFW

4) Press 2. at $UH \RX VXUH"

5) Enter security code at 6HFXULW\ FRGH=

6) Press 2.

Warning: This feature will erase your entire phone book,

which can not be undone!

Ph o n e lo c k

When you turn this on, your phone will lock after you

switch your phone off and back on. Then, each time

you turn your phone on, it will prompt you for a lock

code when you press either 1DPHV or 0HQX. You can not

access most of your phone’s memory and menu fea-

tures, or make phone calls without entering the lock

code.

Turning on phone lock

1) Press 0HQX 4 3 2 1 (6HWWLQJV - 6HFXULW\ VHWWLQJV -

$FFHVV FRGHV - 3KRQH ORFN)

(For details on how to work the Menu, see page 13)

2) Enter lock code then press 2.

3) Press W or V to 2Q, then press 2.

When your phone is locked, calls may be possible to

the emergency number programmed into your phone

(e.g. 911 or other official emergency number) including

calls with Emergency key 9 (page 35).

You can also store a number in the 8QORFNHG SKRQH QXP0

EHU ORFDWLRQ, which allows you to call this number even

though your phone is locked (See page 69 for details).

Answering a call with phone lock on

Press any key except

and

Turning off phone lock

1) Press 0HQX 4 3 2 1 (6HWWLQJV - 6HFXULW\ VHWWLQJV -

$FFHVV FRGHV - 3KRQH ORFN)

(For details on how to work the Menu, see page 13)

2) Enter lock code and press 2.

3) Scroll to 2II, press 2.

With phone lock off, you can now use your phone with-

out entering the lock code each time you turn your

phone on.

P h o n e s e tt in g s

Phone settings allows you access to other phone

features such as an alarm clock and your phone’s

language.

Using phone settings

1) Press 0HQX 4 2 (6HWWLQJV - 3KRQH VHWWLQJV)

(For details on how to work the Menu, see page 13)

2) Press ^Wto reach one of the following options, then

press 6HOHFW

4-2-1 &ORFN - See page 31.

4-2-2 $ODUP FORFN - See page 18.

4-2-3 7RXFK WRQHV - See page 67.

4-2-4 5HVWRUH IDFWRU\ VHWWLQJV - See page 57.

4-2-5 /DQJXDJH - See page 41.

Pr o file s

Now you can adjust and customize your phone to

whatever environments you find yourself in (i.e. meet-

ings, a movie, etc.).

With Profiles, you can control your

phone’sringingvolume, ringingtone,

message alert, keypad tones, warn-

ing tones, etc., in a matter of

seconds.

Note: Restore factory settings (see page 57) will reset any

changes made in Profiles back to the factory defaults. The de-

fault setting is

1RUPDO

Accessing Profiles

At the start screen, press 0HQX 3

Selecting different Profiles

press the

^{If you wan}ð^{t to change your phone’s Profile, quickly}

key

key. Quickly press

again to scroll

through each choice, then press and hold the

for a second to select that Profile.

quick press of the

another Profile and press 2..

^{You can also scro}ð^{ll through the list of Profiles with a}

key. Then press W or V to choose

Either way, this only allows you to select other Profiles;

you can not customize them here. Keep reading to

learn how to customize a Profile.

Customizing Profiles

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) W or V until desired Profile is highlighted

3) Press 2SWLRQV

Once 2SWLRQV is selected, 6HOHFW, &XVWRPL]H and 5HQDPH

will appear as your choices. Once you have selected

and highlighted one of these items, press 2.. If you wish

to go back to the main menu, press %DFN.

6HOHFW activates the currently highlighted Profile.

&XVWRPL]H allows you to customize a Profile by changing

the current settings.

5HQDPH allows you to rename the Profile.

When you select &XVWRPL]H, press 2. and you’ll have

access to several lists and sub-menus that will enable

you to adjust the settings on the current Profile.

Note: &DU and +HDGVHW will not appear in the Profiles list unless

your phone is connected to a car kit or a headset. However,

they will remain in the menu once connected for the first time.

Note: When you change a setting in the current Profile, it only

affects that Profile and will not change your phone’s normal

settings.

Renaming profiles

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) W or V until desired Profile is highlighted

3) Press 2SWLRQV

4) W or V to 5HQDPH and press 2.

5) Enter new name and press 2.

Note: Some profiles can not be renamed.

Re c e iv e d c a lls

This call list shows you the phone numbers of the 10

most recent calls you’ve answered.

At the start screen, press 0HQX 2 3 (&DOO ORJ -

5HFHLYHG FDOOV), then W to scroll the numbers.

Also, see “Call log” on page 27 for details on other call lists.

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 28.

Re s to r e fa c t o r y s e t t in g s

You can reset the settings of many of your phone’s

features to factory defaults (as in a new telephone).

Restoring factory settings

1) Press 0HQX 4 2 4 (6HWWLQJV - 3KRQH VHWWLQJV - 5HVWRUH

IDFWRU\ VHWWLQJV)

(For details on how to work the Menu, see page 13)

2) Enter security code and press 2.

Note: The memory, timers, language selection, security code

and lock codes are not reset. However, any Profiles you have

modified will reset when you restore your settings.

Re n a m in g p r o file s

See “Profiles” on page 55

Re s tr ic t c a lls

This feature allows you to restrict incoming and outgo-

ing calls for your phone. You can select the level of

restrictions through a series of menu choices.

1) Press 0HQX 4 3 1 (6HWWLQJV - 6HFXULW\ VHWWLQJV - 5HVWULFW

FDOOV)

(For details on how to work the Menu, see page 13)

2) Scroll to either 5HVWULFW RXWJRLQJ FDOOV or 5HVWULFW

LQFRPLQJ FDOOV and press 6HOHFW (the following steps

are used for both options)

3) Enter the security code and press 2.

4) Press W or V and press 0DUN to select each level of

restriction

If you have already marked a selection, then highlight

the marked selection and press 8QPDUN if you wish to

remove the restriction.

Restrict outgoing calls

/RFDO FDOOV restricts all outgoing local calls.

/RQJ GLVWDQFH restricts all outgoing long distance calls

and chargeable service numbers.

,QWHUQDWLRQDO restricts all outgoing international calls.

If you attempt to make a call when the appropriate re-

strict call feature is on, your phone will display &KHFN FDOO

UHVWULFWLRQV.

Restrict incoming calls

$OO FDOOV restricts all incoming calls.

Note: When calls are restricted, calls may be possible to the

emergency number programmed into your phone (e.g. 911 or

other official emergency numbers). However, Emergency key 9

may not operate depending on the type of restriction you choose.

Rin g in g o p t io n s

This is one of the settings in your phone’s Profiles (

see

). You can choose how your phone notifies you

page 55

of an incoming call. This setting does not affect incom-

ing text message alert tones (

see page 65)

Selecting ringing options

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) Your phone lists each profile. Use ^Wto highlight the

one you want to set the ringing options for and

press 2SWLRQV.

3) Highlight &XVWRPL]H and press 2.. Press W to

5LQJLQJ RSWLRQV, then press 6HOHFW.

4) Highlight either 5LQJ, $VFHQGLQJ, 5LQJ RQFH, %HHS RQFH

or 6LOHQW and press 2.

Rin g in g t o n e s

This is one of the settings in your phone’s Profiles (see

page 55). Itsetstheringingtoneforincoming voicecalls.

If you set 5LQJLQJ 2SWLRQV (see page 58) to 6LOHQW or %HHS

RQFH, ringing tones are automatically off.

Selecting ringing tones

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) Your phone lists each profile. Use ^Wto highlight the

one you want to set the ringing tones for and press

2SWLRQV.

3) Highlight &XVWRPL]H and press 2.. Press W to

5LQJLQJ WRQHV, then press 6HOHFW.

4) Press ^Wto scroll through the options. After you

hear the tone you wish to use, press 2..

Rin g in g v o lu m e

This is one of the settings in your

phone’s Profiles (see page 55). It

sets the default ringing volume for

incoming voice calls and message

alert tones.

Setting the ringing volume

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) Your phone lists each profile. Use ^Wto highlight the

one you want to set the ringing volume for and

press 2SWLRQV.

3) Highlight &XVWRPL]H and press 2.. Press W to

5LQJLQJ YROXPH, then press 6HOHFW.

4) Press ^Wto scroll through the options. When you

hear the volume level you wish to use, press 2..

Note: The ringing volume setting is stored individually for the

handsfree desktop charger and handsfree car kit.

Ro a m in g

This is a term used to indicate that your phone is not in

its home area. Calls made or received while roaming are

usually more expensive than calls made in your home

area.

When roaming in some systems outside your home

area, your phone may not be recognized by the host

system (the one you’re travelling in) and you may not be

able to place a call.

Contact your service provider for more specific informa-

tion on how roaming works with your phone, as well as

any information on coverage limitations.

Roaming Indicators

When your phone begins roaming, it will beep once and

display 52$0 or (;7(1'(' $5($, depending on how

roaming works with your phone. Contact your service

provider for more details. If your phone is not roaming

(i.e. in its home area) it will either display +20( or the

name of the service provider.

Sa v e d

This is where saved text messages are stored.

See “Text messages and pages” on page 65 for details.

Sc r o llin g v ie w

You have three different options on how you can view

the phone book. Your choices are:

1DPH OLVW shows all stored names in a scrolling list. Three

names will appear at any given time. To view other

names in the directory, scroll back and forth through the

list using ^Wor V. 1DPH OLVW is the default setting.

1DPH.QXPEHU displays individual names and numbers

stored in your directory. Only one name will display on

your screen at a time, with the corresponding phone

number. Use ^Wor V to view other names.

1DPH RQO\ shows individual names only. To view other

names, use ^Wor V. You can view the corresponding

phone number by pressing 'HWDLOV, then W or V.

Selecting your scrolling view

At the start screen,

1) Press 1DPHV

2) Press W to 2SWLRQV/ then press 6HOHFW

3) Press 6HOHFW at 6FUROOLQJ YLHZ

4) Press W or V to select either 1DPH OLVW, 1DPH.QXP0

EHU, or 1DPH RQO\

5) Press 2.

Se c u r ity s e t t in g s

This menu includes the following security features:

4-3-1 5HVWULFW FDOOV - See page 57.

4-3-2 $FFHVV FRGHV - See page 18.

The $FFHVV FRGHV submenu includes 3KRQH ORFN

(page 53), 8QORFNHG SKRQH QXPEHU (page 69), &KDQJH ORFN

FRGH (page 43), and &KDQJH VHFXULW\ FRGH (page 62).

Se c u r ity c o d e

Your phone will prompt you for a security code for cer-

tain features. These features can be used only after the

correct security code has been successfully entered.

Note: When entering your security code, ***** will appear on the

display to keep others from viewing your code.

If you make a mistake entering the code, erase the last

entered digit by pressing &OHDU or press and hold &OHDU.

Then enter the correct code or press %DFN to exit the

current feature.

If you enter an incorrect security code (&RGH HUURU will

appear) five times in a row, your phone won’t accept

any entries for the next five minutes.

Your phone’s default security code is 12345. It’s highly

recommended that you change this code at once, write it

down, and store it in a safe place away from your phone.

Changing your security code

1) Press 0HQX 4 3 2 4 (6HWWLQJV - 6HFXULW\ VHWWLQJV -

$FFHVV FRGHV - &KDQJH VHFXULW\ FRGH)

(For details on how to work the Menu, see page 13)

2) Enter security code and press 2.

3) Enter new security code at (QWHU QHZ VHFXULW\ FRGH=,

press 2.

4) Enter new security code again at 9HULI\ QHZ VHFXULW\

FRGH=, press 2.

5) Phone will display 6HFXULW\ FRGH FKDQJHG

Note: If you have changed your security code and don’t remem-

ber the new code, contact your service provider. Once you have

changed your security code, the default setting is no longer valid.

Se n d o w n n u m b e r

In most service areas, when you call someone your

name will be presented to his/her caller ID (if they sub-

scribe). This feature allows you to block their caller ID

(i.e. your number will not be presented) when you call

them. This feature works on a per-call basis. Contact

your service provider for more details.

Note: Before you can activate this feature, you must first store

the feature code given to you by your service provider. Other-

wise, this feature may not appear in the menu. See “Network

feature setting” on page 47 for more details.

Note: This feature is only effective when calling to a number that

is equipped with Caller ID.

1) Press 0HQX 4 4 4 (6HWWLQJV - 1HWZRUN VHUYLFHV - 6HQG

RZQ QXPEHU)

(For details on how to work the Menu, see page 13)

2) W to <HV (to show your number) or 1R (to not show

it) and press 2.

3) Enter the number you wish to call (or press 6HDUFK

to retrieve the number from the phone book and

press 2.), then press 2.

4) Your phone will attempt to call this number with the

feature code you stored in Menu 4 4 5 (

see “Net-

)

work feature setting” on page 47

Se tt in g s

This main menu allows you access to other features.

See these individual entries for more information.

4-1 &DOO VHWWLQJV -

See page 28

4-2 3KRQH VHWWLQJV -

See page 54

4-3 6HFXULW\ VHWWLQJV -

See page 61

4-4 1HWZRUN VHUYLFHV -

See page 48

Sp e c ia l r in g in g t o n e

You can set your phone to ring differently when a par-

ticular person calls you.

Simply store that person’s name and number in your

phone book and include the ! character somewhere

within that person’s name (e.g. Joe!Smith).

To include a ! character within a name, just press the 1

key four times.

You can also do this by pressing the ∗ key. When a list

of special characters appears, press ^Wor V to the !

character and press ,QVHUW.

When that person calls you from that number, you’ll

know it by the special ringing tone.

Note: The special ringing tone will function only when Caller ID

is active and the calling number is available.

See “Phone book” on page 50 for more details on storing

names and numbers.

Sto r in g a n a m e & n u m b e r

You can save names and numbers in the Phone book.

Either use the method described in “Storing a name and

number” on page 51 or the “quick save” method de-

scribed below.

Quick save

At the start screen,

1) Enter the phone number and press 6DYH

2) The phone prompts you to enter a 1DPH=. Enter a

name if you wish (optional), then press 2.

Also, see “Entering letters and numbers” on page 36.

Sys te m

Your phone is capable of working in Residential, Private,

and Public Systems (such as your Home System). You

can choose how your phone selects a network to use.

This feature is 0HQX 5 in your phone. The default is

$XWRPDWLF, which means your phone automatically

searches for networks available to you and chooses the

appropriate one. Every time you switch on your phone,

it resets this to $XWRPDWLF.

If you choose 0DQXDO, your phone searches for net-

works, then begins displaying them. Your phone

displays $9$,/$%/(= or 127 $9$,/$%/(= for the systems it

finds (You can not use 127 $9$,/$%/(= systems). Use the

W key to scroll through the choices, and press 2. when

you see the one you want.

If you choose 1HZ 6HDUFK, your phone begins a new

search for new Private and Residential systems. When

it finds the best new system, it displays it. You can then

6HOHFW it, or start another search by pressing 1H[W.

Note: If you have two phone numbers (two NAMs), the

0DQXDO

features are only used with your primary phone

and

1HZ VHDUFK

number (NAM 1). See “NAM selection” on page 46 for more in-

formation concerning NAMs.

To switch from private to public

If you are in a private system and want access to a pub-

lic system, press and hold 0HQX when you are not in a

call. Your phone will display 6HDUFK SXEOLF V\VWHPV", press

2. and your phone will use the public system for the

next (only once) outgoing call. After that it goes back to

$XWRPDWLF system selection.

Te x t m e s s a g e s a n d p a g e s

Before you can receive and store text messages and

pages, you must subscribe to the text messaging net-

work service. See your service provider for details.

About text messages

The maximum length of a text message is up to 225

characters. Your phone has space for up to 30 text

messages, depending on the length of each message.

Note: Text messages that you receive with your phone may

appear different at times, due to messages that originate in net-

works other than your own. This does not affect the use of your

phone in any way.

Also, the maximum length of a text message may depend on

the network’s capabilities. See your service provider for addi-

tional text messaging information.

Text message options

When you access 7H[W PHVVDJHV, you will view a screen

with two different options.

,QER[ is where incoming messages are received and

stored. All new, unread messages are kept here.

6DYHG allows you to save your incoming messages. All

saved, read messages are kept here.

When you receive a text message

Text messages are shown in the order that they were

received, in their order of priority.

0HVVDJH UHFHLYHG indicates an unread message or page.

If more than one message exists, the number of re-

ceived messages will be listed first.

1HZ HPHUJHQF\ PHVVDJH indicates that the message or

page received was sent by someone via the service

provider. Emergency messages are sent only in situa-

tions where life and/or property are in immediate

danger. Emergency messages are listed first and will

override all other messages.

8UJHQW messages are also high priority messages.

Reading text messages

With 0HVVDJH UHFHLYHG displayed,

1) Press 5HDG and scroll to new message

2) Press 5HDG again

The ‘Options’ soft key

Press 2SWLRQV while a text message is displayed to

access the following reading options.

1) Press 2SWLRQV

2) Press W to the option you want (see below)

3) Press 2.

Reading options

When you open a message and read it, you’ll have

access to a list of options.

5HDG QH[W allows you to read the next message.

(UDVH will erase the message.

&DOO EDFN will automatically call whoever sent the mes-

sage if any phone numbers are included in the

message.

6DYH will save the message to 6DYHG.

If someone has paged you

Your phone will display 0HVVDJH UHFHLYHG. The message

will display &DOO=, followed by the name or number of the

person who paged you. Names will appear only if that

person has been stored in the phone book.

Calling someone back in a message

The message along with the phone number must be

displayed on your phone’s screen. While the text mes-

sage is displayed,

1) Press 2SWLRQV

2) Select &DOO EDFN, then press 2.

To quickly call back a number in a message

Press

while the message is displayed.

Note: If more than one number is on the display, the numbers

to call and press . If no numbers are found, your phone will

^{are displayed in a}ó^{list. Simply select the phone number you want}

display 1R QXPEHU IRXQG RQ WKLV VFUHHQ.

When your phone’s memory is full

When you have an incoming text message and your

phone’s memory is full, one or more messages, of

lowest priority, will automatically be deleted in order to

receive the new text message.

If the message memory is still full, your phone will dis-

play 1R VSDFH= PHVVDJH ZDLWLQJ You can clear this

notification by pressing 2..

Note: Messages are usually deleted from your Inbox. An incom-

ing emergency message may delete messages from your

Saved folder

To u c h t o n e s

Your phone can generate various sounds, called touch

tones, when the keys are pressed. These are also

known as DTMF tones.

Touch tones can be used for many automated, over-

the-phone services such as checking bank balances,

airline arrival and departure times, and using voice mail-

box options. Touch tones can be sent only when a call

is active.

Storing touch tone strings

Touch tone strings can be used for sending and receiv-

ing information with your phone. For example, you can

store your office voice mailbox number, along with your

password for easy access to your messages.

Store touch tone strings the same way you store

phone numbers (see page 51).

You can store a whole digit sequence in your phone

book and send it as touch tones for frequently-used

strings of numbers.

Sending a touch tone string

Make sure Menu 4 2 3 1 (6HWWLQJV - 3KRQH VHWWLQJV - 7RXFK

WRQHV - 0DQXDO WRXFK WRQHV) is not set to 2II. During a call,

1) Press 2SWLRQV

2) Scroll to 7RXFK WRQHV and press 2.

3) Enter touch tone string or recall string from the

phone book and press 2.

Note: Use caution when sending confidential information over

the air when using DTMF tones in analog mode.

Storing touch tone strings with phone numbers

1) Enter the phone number (e.g. your office voice

mailbox)

2) Press ∗∗∗ (p) or ∗∗∗∗ (w)

3) Enter the touch tone string (e.g. voice mailbox

password)

4) Store the number as you normally would

Note: See “Special Characters (for storing numbers)” on

page 37 for details on “p” and “w” characters.

When you dial this number, your phone first dials the

phone number, then waits (because of the “w” charac-

ter) for you to press 6HQG. Your phone then sends your

password.

If you include a “p” character instead of a “w”, your

phone pauses for 2.5 seconds, then automatically

sends your password as touch tones.

To u c h t o n e le n g th

This feature determines the length of each touch tone

when they are sent automatically.

6KRUW sets the tone length to .1 second. /RQJ sets the

tone length to .5 second.

You can set the touch tone length by pressing

0HQX 4 2 3 2 (6HWWLQJV - 3KRQH VHWWLQJV - 7RXFK WRQHV -

7RXFK WRQH OHQJWK).

Un lo c k e d p h o n e n u m b e r

When the phone lock is on (see page 53), no calls can

be made. However, you can store one number into your

phone that can be called when it’s locked.

Storing the unlocked phone number

At the start screen,

1) Press 0HQX 4 3 2 2 (6HWWLQJV - 6HFXULW\ VHWWLQJV - $FFHVV

FRGHV - 8QORFNHG SKRQH QXPEHU)

(For details on how to work the Menu, see page 13)

2) Enter lock code and press 2.

3) Enter phone number at 1XPEHU= (or press 6HDUFK

and scroll through the phone book)

4) Press 2.

Calling the unlocked phone number

Note: Your phone must be locked to use this feature.

At the start screen, press ^Wor V once, then

stored and press

Vib r a tin g a le r t

^{you can manually}ó^{enter the phone number as it is}

This is one of the settings in your phone’s Profiles

(see page 55). When your phone has the vibrating

battery attached, you can set your phone to vibrate

when you receive a voice call.

Note: This setting will not appear in your phone unless a

vibrating battery has been attached.

Activating vibrating alert

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) Your phone lists each Profile. Use ^Wto highlight the

one you want to set the vibrating alert for and press

2SWLRQV.

3) Highlight &XVWRPL]H and press 2.. Press W to reach

9LEUDWLQJ DOHUW, then press 6HOHFW again.

4) Use ^Wto highlight 2Q or 2II and press 2.. If you

choose 2Q, your phone will vibrate even if you have

set 5LQJLQJ RSWLRQV (see page 58) to 6LOHQW.

Note: The vibrating alert does not work when your phone is

connected to any charger or car kit.

Vo ic e m a ilb o x n u m b e r

This number dials your voice mailbox.

See “Voice messages” in next section.

Vo ic e m e s s a g e s

When you receive a voice message,

phone will

your

notify you by beeping, lighting up the voice message

indicator, and displaying 1HZ YRLFH PHVVDJH. The display

shows the number of messages if there are more than

one.

Storing your voice mailbox number

1) Press 0HQX 1 2 2 (0HVVDJHV - 9RLFH PHVVDJHV - 9RLFH

PDLOER[ QXPEHU)

(For details on how to work the Menu, see page 13)

2) Enter voice mailbox number

3) Press 2.

Once you enter your voice mailbox number, it’s used

until you change it again. It may be up to 32 digits long.

Note: The voice mailbox may be provided by the network (the

service provider gives you the number to call).

Calling your voice mailbox any time

Press 0HQX 1 2 1 (0HVVDJHV - 9RLFH PHVVDJHV - /LVWHQ

WR YRLFH PHVVDJHV)

(For details on how to work the Menu, see page 13)

Press and hold 1

Note: Before you can call your voice mailbox, you must first

store your voice mailbox number.

Vo ic e p r iv a c y

Note: This feature may not be available in all areas. Please see

your service provider for details and availability.

Used only in digital networks, Voice Privacy encrypts

the voice channel so that people can not eavesdrop on

your conversation. If you turn this feature on and voice

privacy becomes inactive for any reason your phone

displays 9RLFH SULYDF\ QRW DFWLYH and beeps.

You may set this to 2Q or 2II by pressing 0HQX 4 4 1

(6HWWLQJV - 1HWZRUN VHUYLFHV - 9RLFH SULYDF\).

W a r n in g t o n e s

This is one of the settings in your phone’s Profiles (

see

). Warning tones include tones your phone

page 55

makes for conditions such as errors, confirmations,

power on, battery low, and recharge battery. You can

set warning tones on or off.

Turning warning tones on and off

1) Press 0HQX 3 (3URILOHV)

(For details on how to work the Menu, see page 13)

2) Your phone lists each Profile. Use ^Wto highlight the

one you want to set the warning tones for and

press 2SWLRQV.

3) Highlight &XVWRPL]H and press 2.. Press W to

:DUQLQJ WRQHV, then press 6HOHFW.

4) Use ^Wto highlight 2Q or 2II and press 2.

W e lc o m e n o te

You can program a welcome note into your phone to

display a message when you first turn it on (i.e. hello,

your name, a reminder, etc.). The maximum length is 36

characters.

1) Press 0HQX 1 3 (0HVVDJHV - :HOFRPH QRWH)

(For details on how to work the Menu, see page 13)

2) Enter new message or edit an existing one

3) Press 2SWLRQV

4) Press W to 6DYH or (UDVH and press 2.

The welcome note displays each time your phone is

switched on. Characters you enter are added to the left

of the cursor. Press &OHDU to delete characters to the left

of the cursor. Press ^Wor V to move the cursor right or

left.

See “Entering letters and numbers” on page 36 for details.

6 . A c c e s s o r ie s

If you want to enhance your phone’s functionality, an

extensive range of accessories is available for you. You

can select any of these items to help accommodate

your specific communication needs. For availability of

these and other accessories, contact your service

provider.

A few practical rules for accessory operation:

Keep all accessories out of reach of small children.

When you disconnect the power cord of any

accessory, grasp and pull the plug, not the cord.

Check regularly that any vehicle-installed acces-

sories are mounted and are operating properly.

Installation of any complex car accessories must

be made by qualified personnel only.

Use only batteries, chargers and accessories approved by the

phone manufacturer. The use of any other types will invalidate

any approval or warranty applying to the phone, and may be

dangerous.

See page 8 for important battery usage information.

B a t te r ie s

The following table shows battery options that are avail-

able for your phone, charging times with the Rapid

Travel Charger (ACP-9U) and the Rapid Cigarette

Lighter Charger (LCH-9), talk times, and standby times.

Consult your service provider for more information.

These charging times are approximate.

CONTAINS: Nickel metal hydride or lith-

ium ion battery. Must be recycled or

disposed of properly. Must not be dis-

posed of in municipal waste.

Li-Ion

NiMH

Charging Times

A C P-7 U

C h a r g e r

A C P-9 U

C h a r g e r

B a tte r y Op tio n

BLS-2 Extended Li-Ion Battery 900 mAh

BMS-2 Extended NiMH Battery 900 mAh

BMS-2V Vibrating NiMH Battery 900 mAh

BLS-4 Extended Li-Ion Battery 1500 mAh

4 hrs

5 hrs

2 hrs

1 hr 30 min

3 hrs 30 min

Standby and Talk Times

D ig ita l

Ta lk Tim e Ta lk Tim e

A n a lo g

Sta n d b y

Tim e

B a tte r y Op tio n

BLS-2 Extended Li-Ion

Battery 900 mAh

2 hrs to

3 hrs15 min

1 hr to

100 to 200 hrs (dig)

1 hr 50 min 30 to 50 hrs (ana)

BMS-2 Extended NiMH

Battery 900 mAh

2 hrs to

3 hrs15 min

1 hr to

100 to 200 hrs (dig)

1 hr 50 min 30 to 50 hrs (ana)

BMS-2V Vibrating NiMH

Battery 900 mAh

2 hrs to

3 hrs15 min

1 hr to

100 to 200 hrs (dig)

1 hr 50 min 30 to 50 hrs (ana)

BLS-4 Extended Li-Ion 3 hrs 10 min to 1 hr 35 min to 170 to 335 hrs (dig)

Battery 1500 mAh 5 hrs 10 min 2 hrs 50 min 50 to 83 hrs (ana)

Note: The times shown are approximate. Battery operation

times vary according to signal conditions, network parameters

set by the service provider, and how you use your phone.

C h a r g e r s & O t h e r A c c e s s o r ie s

The following chargers and other accessories are avail-

able for your phone; please see your dealer for details.

Also, refer to the accessories brochure that was included

in your sales package for the entire line of Genuine

Nokia Accessories.

Note: When a charger is not in use, disconnect it from the pow-

er source. Do not leave the battery connected to a charger for

longer than a week, since overcharging may shorten its life. If left

unused, a fully charged battery will discharge itself over time.

Standard Travel Charger

(ACP-7U)

This lightweight (187g) and

durable AC charger can be

used with all battery options.

To use the Standard Travel

Charger, plug it into a wall out-

let and connect the lead from

the charger to the base of your

phone. The charger can also be used together with the

Compact Desktop Charging Stand (DCH-9).

Rapid Travel Charger (ACP-9U)

This lightweight (100g) AC charger

can be used with all battery options.

Calls can be made during charging,

even with a fully discharged battery.

To use the Rapid Travel Charger

(ACP-9U), plug it into a standard

120V AC wall outlet, and connect the

lead from the charger to the base of

your phone.

The charger can also be used together with the optional

Compact Desktop Charging Stand (DCH-9). Approxi-

mate charging times for discharged batteries are shown

at the beginning of this section.

Rapid Cigarette Lighter Charger (LCH-9)

You can charge your

phone’s battery from

your vehicle battery by

using the Rapid Cigarette

Lighter Charger (LCH-9).

You can also use this

lightweight charger with

the Compact Desktop Charging Stand (DCH-9).

Calls are possible during charging. A green light indi-

cates the charger is ready for charging (when not

charging) or finished charging (if it has been charging).

The battery charging times are the same as those for

the Rapid Travel Charger (ACP-9U)

The input voltage range is from 11 to 32V DC, negative

grounding. Avoid prolonged charging with the Rapid

Cigarette Lighter Charger (LCH-9) when the car engine

is not running; this may cause the battery of your car to

drain. Note also that in some cars the cigarette lighter

plug is not provided with electricity if the ignition is not

switched on.

Compact Desktop Charging Stand (DCH-9)

The Compact Desktop Charg-

ing Stand (DCH-9) supports

your phone for an easy and

convenient way to charge

your phone’s battery, as well

as a spare battery.

Used together with the Standard Travel Charger

(ACP-7U) or the Rapid Travel Charger (ACP-9U), this

drop-in stand is an economical choice when you need

your phone close at hand, always ready for calls.

Charging is indicated by the scrolling battery bars on

the right side of your phone’s display. When the scrol-

ling stops, the battery is approximately 80% charged.

A battery will be fully charged a few hours after the

scrolling stops.

Also, you may notice a light indicator on the stand,

which is used for charging a spare battery. A green light

indicates a battery is at least 80% full; the red light

indicates a battery is charging.

7 . Tr o u b le s h o o t in g

W h a t if c h a r g in g fa ils ?

If your phone displays 1RW FKDUJLQJ, charging is sus-

pended. Make sure the battery is connected to an

approved charging device and that the battery is at

room temperature. Extreme temperatures, hot or cold,

can affect your battery’s performance and prevent

charging.

If charging still fails, disconnect the charger from your

phone. Then reconnect the charger to

phone and

your

retry. If you still experience charging problems, contact

your dealer and, if necessary, bring your phone in to

have it serviced. Also remember to bring in your battery

and charger.

N o s e r v ic e

If you’re outside the wireless service area, 1R VHUYLFH will

display on your phone. No calls can be made or

received, including emergency calls.

W h a t if t h e c a ll d o e s n ’t g o t h r o u g h ?

Your phone can make and receive calls only when it’s

switched on and in the wireless network’s service area.

1R VHUYLFH means that you’re probably outside the wire-

less service area. No calls can be made or received.

See “Get a strong signal” on page 9.

&KHFN FDOO UHVWULFWLRQV means calls to the phone number

you tried to call are restricted (see “Restrict calls” on

page 57), or your phone is locked (see “Phone lock” on

page 53).

Note: Check with your service provider for information about

when you need to dial a ‘1’ and/or an area code in addition to

the number.

If yo u m a k e a m is t a k e d ia lin g

Press &OHDU to delete the last character entered, or press

and hold &OHDU to delete all characters entered.

8 . R e f e r e n c e In f o r m a t io n

Im p o r t a n t Sa fe t y In fo r m a tio n

Tr a ffic Sa fe t y

Do not use a hand-held telephone while driving a vehicle. If

using a hand-held phone park the vehicle before conversing.

Always secure the phone in its holder; do not place the phone

on the passenger seat or where it can break loose in a collision

or sudden stop.

The use of an alert device to operate a vehicle’s lights or horn

on public roads is not permitted.

Remember, road safety always comes first!

O p e r a t in g En v ir o n m e n t

Remember to follow any special regulations in force in any area

and always switch off your phone whenever it is forbidden to

use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another de-

vice, read its user’s guide for detailed safety instructions. Do not

connect incompatible products.

As with other mobile radio transmitting equipment, users are

advised that for the satisfactory operation of the equipment and

for the safety of personnel, it is recommended that the equip-

ment should only be used in the normal operating position (held

to your ear with the antenna pointing over your shoulder).

Ele c t r o n ic D e v ic e s

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic equipment

may not be shielded against the RF signals from your wireless

phone.

Pacemakers

Pacemaker manufacturers recommend that a minimum separa-

tion of 6 inches (20 cm.) be maintained between a handheld

wireless phone and a pacemaker to avoid potential interference

with the pacemaker. These recommendations are consistent

with the independent research by and recommendations of

Wireless Technology Research. Persons with pacemakers:

•

Should always keep the phone more than 6 inches (20 cm)

from their pacemaker when the phone is switched on;

•

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimize

the potential for interference.

•

If you have any reason to suspect that interference is tak-

ing place, switch off your phone immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing

aids. In the event of such interference, you may want to consult

your service provider.

Other Medical Devices

Operation of any radio transmitting equipment, including cellular

phones, may interfere with the functionality of inadequately

protected medical devices. Consult a physician or the manufac-

turer of the medical device to determine if they are adequately

shielded from external RF energy or if you have any questions.

Switch off your phone in health care facilities when any regula-

tions posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be

sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles (e.g. electronic

fuel injection systems, electronic anti-skid (anti-lock) braking

systems, electronic speed control systems, air bag systems).

Check with the manufacturer or its representative regarding

your vehicle. You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted Facilities

Switch your phone off in any facility where posted notices so

require.

P o te n t ia lly Ex p lo s iv e At m o s p h e r e s

Switch off your phone when in any area with a potentially explo-

sive atmosphere and obey all signs and instructions. Sparks in

such areas could cause an explosion or fire resulting in bodily

injury or even death.

Users are advised to switch off the phone while at a refueling

point (service station). Users are reminded of the need to ob-

serve restrictions on the use of radio equipment in fuel depots

(fuel storage and distribution areas), chemical plants or where

blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not

always clearly marked. They include below deck on boats;

chemical transfer or storage facilities; vehicles using liquefied

petroleum gas (such as propane or butane); areas where the air

contains chemicals or particles, such as grain, dust or metal

powders; and any other area where you would normally be

advised to turn off your vehicle engine.

Ve h ic le s

Only qualified personnel should service the phone, or install the

phone in a vehicle. Faulty installation or service may be danger-

ous and may invalidate any warranty which may apply to the

unit.

Check regularly that all wireless phone equipment in your

vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive

materials in the same compartment as the phone, its parts or

accessories.

For vehicles equipped with an air bag, remember that an air bag

inflates with great force. Do not place objects, including both

installed or portable wireless equipment, in the area over the air

bag or in the air bag deployment area. If in-vehicle wireless

equipment is improperly installed and the air bag inflates,

serious injury could result.

Switch off your phone before boarding an aircraft. The use of

wireless telephones in an aircraft may be dangerous to the op-

eration of the aircraft, disrupt the wireless telephone network

and may be illegal.

Failure to observe these instructions may lead to the suspension

or denial of telephone services to the offender, or legal action,

or both.

Em e r g e n c y C a lls

IMPORTANT!

This phone, like any wireless phone, operates using radio

signals, wireless and landline networks as well as user-pro-

grammed functions which can not guarantee connection in all

conditions. Therefore, you should never rely solely upon any

wireless phone for essential communications (e.g. medical

emergencies).

Remember, to make or receive any calls the phone must be

switched on and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone net-

works or when certain network services and/or phone features

are in use. Check with local service providers.

M a k in g a n Em e r g e n c y C a ll

1) If the phone is not on, switch it on

2) Key in the emergency number for your present

location (e.g. 911 or other official emergency num-

ber). Emergency numbers vary by location.

3) Press

If certain features are in use (keyguard, restrict calls, etc.), you

may first need to turn those features off before you can make an

emergency call. Consult this document and your local cellular

service provider.

When making an emergency call, remember to give all the ne-

cessary information as accurately as possible. Remember that

your wireless phone may be the only means of communication

at the scene of an accident - do not cut off the call until given

permission to do so.

Ra d io Fr e q u e n c y (RF) Sig n a ls

Your wireless handheld portable telephone is a low power radio

transmitter and receiver. When it is ON, it receives and also

sends out radio frequency (RF) signals.

In August, 1996, the Federal Communications Commission

(FCC) adopted RF exposure guidelines with safety levels for

handheld wireless phones. Those guidelines are consistent with

safety standards previously set by both U.S. and international

standards bodies:

ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*.

Those standards were based on comprehensive and periodic

evaluations of the relevant scientific literature. For example, over

120 scientists, engineers, and physicians from universities, gov-

ernment health agencies and industry reviewed the available

body of research to develop the ANSI Standard (C95.1).

The design of your phone complies with the FCC guidelines

(and those standards).

*American National Standards Institute, National Council on

Radiation Protection and Measurements; International Com-

mission on Non-Ionizing Radiation Protection.

C a r e a n d M a in t e n a n c e

Your phone is a product of superior design and craftsmanship

and should be treated with care. The suggestions below will

help you to fulfill any warranty obligations and allow you to enjoy

this product for many years. When using your phone, battery,

charger, OR any accessory:

•

Keep it and all its parts and accessories out of small

children’s reach.

Keep it dry. Precipitation, humidity and liquids contain

minerals that will corrode electronic circuits.

Do not use or store it in dusty, dirty areas as its moving

parts can be damaged.

Do not store it in hot areas. High temperatures can shorten

the life of electronic devices, damage batteries, and warp

or melt certain plastics.

•

Do not store it in cold areas. When the phone warms up

(to its normal operating temperature), moisture can form

inside the phone, which may damage the phone's elec-

tronic circuit boards.

•

Do not attempt to open it. Non-expert handling of the

device may damage it.

Do not drop, knock or shake it. Rough handling can break

internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or strong

detergents to clean it. Wipe it with a soft cloth slightly

dampened in a mild soap-and-water solution.

•

Do not paint it. Paint can clog the device’s moving parts

and prevent proper operation.

Use only the supplied or an approved replacement

antenna. Unauthorized antennas, modifications or attach-

ments could damage the phone and may violate regula-

tions governing radio devices.

•

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified service

facility. The personnel there will assist you, and if neces-

sary, arrange for service.

9 . Te c h n ic a l D a t a

Wireless System

Weight

Dual-Band TDMA and AMPS

165g (6 oz) with BMS-2

900 mAh NiMH Battery

Size

140 cc

Frequency Range

Lowband

824.04 - 848.97 MHz (TX)

869.04 - 893.97 MHz (RX)

Highband

1850.04 - 1909.92 MHz (TX)

1930.08 - 1989.96 MHz (RX)

Transmitter Output Power

Up to 600mW nominal

Battery Voltage

Charging current

3.6 V nominal

850 mAh max.

Operating Temperature -20°C to + 40°C

(-4°F to + 104°F)

Number of Channels

832 lowband

1997 highband

Number of NAMs

Memory Locations

Memory Capacity

199

Alpha: 16 digits per location

Numeric: 32 digits per location

USA

NOKIA MOBILE PHONES – 6200 Courtney Campbell Causeway,

Suite 900, Tampa, FL 33607

Tel: 1-888-NOKIA2U (1-888-665-4228)

CANADA

NOKIA PRODUCTS LTD. – 575 Westney Rd. South,

Ajax, Ontario L1S 4N7. Tel: (905) 427-6654

The information contained in this phone was written for

dual-mode TDMA and AMPS phones. The right to

make changes and improvements to any of the pro-

ducts described in this guide without prior notice is

reserved.

Issue No. 1

Printed in Canada

02/98

N O K IA On e -Ye a r L im it e d W a r r a n ty

Nokia Mobile Phones, Inc. (“NMPI”) warrants that this cellular

phone (“Product") is free from defects in material and workman-

ship, according to the following terms and conditions:

1. The limited warranty for the Product extends for ONE (1) year

beginning on the date of purchase of the Product.

2. The limited warranty extends only to the original consumer

purchaser (“Consumer”) of the Product and is not assignable or

transferable to any subsequent purchaser/end user.

3. The limited warranty extends only to Consumers who pur-

chase the Product in the United States.

4. During the limited warranty period, NMPI will repair, or re-

place, at NMPI’s option, any defective parts, or any parts that

will not properly operate for their intended use with new or fac-

tory rebuilt replacement items. No charge will be made to the

Consumer for any such parts. NMPI will also pay for the labor

charges incurred by NMPI in repairing or replacing the defective

parts. The external housing and cosmetic parts shall be free of

defects at the time of shipment and, therefore, shall not be

covered under these limited warranty terms.

5. Upon request from NMPI, the Consumer must provide infor-

mation to reasonably prove the date of purchase.

6. The Consumer shall bear the cost of shipping the Product to

the Customer Service Department of NMPI. NMPI shall bear the

cost of shipping the Product back to the Consumer after the

completion of service under this limited warranty.

7. The Consumer shall have no coverage or benefits under this

limited warranty if any of the following conditions are applicable:

a) The Product has been subject to abnormal use, abnormal

conditions, improper storage, exposure to moisture or damp-

ness, unauthorized modifications, unauthorized connections,

unauthorized repair, misuse, neglect, abuse, accident, alter-

ation, improper installation, or other acts which are not the fault

of NMPI, including damage caused by shipping and blown

fuses.

b) The Customer Service Department at NMPI was not notified

by Consumer of the alleged defect or malfunction of the

Product during the applicable limited warranty period.

c) The Product serial number plate or the accessory date code

has been removed, defaced, or altered.

d) The defect or damage was caused by the defective function

of the cellular system, or by inadequate signal reception by the

external antenna.

8. If a problem develops during the limited warranty period, the

Consumer should take the following step-by-step procedure:

a) The Consumer shall return the Product to the place of pur-

chase for repair or replacement processing.

b) If “a” is not convenient the Consumer may contact the Cus-

tomer Service Department at NMPI, at the phone number listed

on the bottom of the next page for further instructions.

c) The Consumer shall ship the Product prepaid and insured.

Expenses related to removing the Product from an installation

are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not

covered by this limited warranty. The Consumer shall be re-

sponsible for expenses related to reinstallation of the Product.

e) If the Product is returned to the Customer Service Depart-

ment at NMPI during the limited warranty period, but the

problem with the Product can not be fixed under the terms and

conditions of this limited warranty, the Consumer will be notified

and given an estimate of the charges the Consumer must pay

to have the Product repaired, with all shipping charges billed to

the Consumer. If the estimate is refused, the Product will be re-

turned freight collect. If the Product is returned to the Customer

Service Department at NMPI after the expiration of the warranty

period, NMPI’s normal service policies shall apply and the

Consumer will be invoiced for all shipping charges.

9. The Product consists of newly assembled equipment that

may contain used components which have been reprocessed

to allow machine compliance with Product performance and

reliability specifications.

10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR

FITNESS FOR A PARTICULAR PURPOSE OF USE, SHALL BE

LIMITED TO THE DURATION OF THE FOREGOING WRITTEN

WARRANTY, OTHERWISE, THE FOREGOING WARRANTY IS

THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND IN

LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

NMPI SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-

QUENTIAL DAMAGES OR A LOSS OF ANTICIPATED

BENEFITS OR PROFITS, RESULTING FROM THE PURCHASE

OR USE OF THE PRODUCT OR ARISING FROM THE BREACH

OF THE WARRANTY EVEN IF NMPI KNEW OF THE LIKELI-

HOOD OF SUCH DAMAGES.

11. Some states do not allow limitation of how long an implied

warranty lasts, so the above limitation may not apply to you (the

Consumer). Some states do not allow the exclusion of inciden-

tal or consequential damages, so the above limitation or

exclusions may not apply to you (the Consumer). This limited

warranty gives you specific legal rights and you may also have

other rights which vary from state to state.

12. NMPI neither assumes nor authorizes any authorized ser-

vice center or any person or entity to assume for it any other

obligation or liability beyond that which is expressly provided for

in this limited warranty.

13. Questions concerning this limited warranty may be directed

to the Customer Service Department at Nokia, 6200 Courtney

Campbell Causeway, Suite 900, Tampa, FL 33607. Telephone

1-888-NOKIA2U (1-888-665-4228) or (813) 288-3800,

Facsimile: (813) 287-6612.

14. The limited warranty period for Nokia Product Corp. sup-

plied attachments and accessories are specifically defined

within their own warranty cards and packaging.

Para obtener un manual del usuario en español favor de

llamar o enviar un fax al teléfono 1-888-NOKIA2U

(1-888-665-4228), fax 813-287-6612.

Transcend Information STOREJET 18 User Manual
Talk electronic 22 User Manual
Seagate SAVVIO ST9900605SS User Manual
Seagate CHEETAH 15K7 SAS ST3600057SS User Manual
Seagate BARRACUDA ST360021A User Manual
Seagate BARRACUDA 720011 SERIAL ATA ST31000340AS User Manual
Samsung SGH E350E User Manual
Panasonic COLOUR TELEVISION CT 32G12 User Manual
Nokia Cell Phone 6220 User Manual
Nokia 88XX User Manual