BD-E5200
BD-E5300
™
Blu-ray Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
ENGLISH
12. Use only with the
This product satisfies CE regulations when
shielded cables and connectors are used
to connect the unit to other equipment.
To prevent electromagnetic interference
with electric appliances, such as radios
and televisions, use shielded cables and
Blu-ray Discs
Precautions
cart, stand, tripod,
bracket, or table
• Do not leave a Blu-ray Disc in the player for
long periods of time. Remove the Blu-ray
Disc from the player and store it in its case.
• Be careful not to scratch or leave
fingerprints on the surface of the Blu-ray
Disc.
specified by the
Important Safety Instructions
manufacturer,
or sold with the
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
apparatus. When a
connectors for connections
.
cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
IMPORTANT NOTE
Keep these operating instructions handy for
future reference.
DVD-VIDEO, Audio CD (CD-DA)
The mains lead on this equipment is supplied
with a moulded plug incorporating a fuse. The
value of the fuse is indicated on the pin face
of the plug.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
1. Read these instructions.
• Wipe off dirt or contamination on the disc
2. Keep these instructions.
with a soft cloth.
3. Heed all warnings.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover
omitted if the cover is detachable. If a
replacement fuse cover is required, it must be
of the same colour as the pin face of the plug.
Replacement covers are available from your
dealer.
4. Follow all instructions.
Disc Storage
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
way, such as when power-supply cord or Be careful not to damage the disc because
plug is damaged, liquid has been spilled
the data on these discs is highly vulnerable to
or objects have fallen into the apparatus, the environment.
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including AV receivers)
that produce heat.
If the fitted plug is not suitable for the power
points in your house or the cable is not long
enough to reach a power point, you should
obtain a suitable safety approved extension
lead or consult your dealer for assistance.
However, if there is no alternative to cutting
off the plug, remove the fuse and then safely
dispose of the plug. Do not connect the plug
to a mains jack, as there is a risk of shock
hazard from the bared flexible cord.
• Keep in a clean, protective jacket.
• If you move your player suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the player, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try
to play back again.
Disc Storage & Management
Disc Handling
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
Disc Shape
• Use discs with
To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be
readily operable.
regular shapes. If you
use an irregular disc
Handling Cautions
(a disc with a special
• Do not write on the printed side with a ball-
shape), you can damage the player.
point pen or pencil.
The product unit accompanying this user
manual is licensed under certain intellectual
property rights of certain third parties.
• Do not use record cleaning sprays or
antistatic sprays to clean discs. Also,
do not use volatile chemicals, such as
benzene or thinner.
Holding discs
• Avoid touching the surface
of a disc where data has
been recorded.
• Do not apply labels or stickers to discs.
(Do not use discs fixed with exposed tape
adhesive or leftover peeled-off stickers.)
3
•
•
Do not use scratch-proof protectors or covers.
Do not use discs printed with label printers
available on the market.
•
If you encounter an abnormal noise, burning
smell or smoke, turn off the power switch
immediately and disconnect the power plug
from the wall outlet. Then, contact the nearest
customer center for technical assistance. If you
still use the product as it is, this may cause an
electric shock or fire.
Contents
•
•
Do not load warped or cracked discs.
Before connecting other components to this
player, be sure to turn them off.
Audio.........................................................14
Network ....................................................16
System......................................................17
Language ..................................................17
Security.....................................................17
General......................................................18
Support.....................................................18
KEY FEATURES
Blu-ray Disc Features...................................2
•
Do not move the player while it is playing a disc.
The disc can be scratched or damaged and the
player’s internal parts can be damaged.
Do not put a flower vase filled with water or any
small metal objects on the player.
Blu-ray Disc Player Features........................2
Maintenance of Cabinet
SAFETY INFORMATION
•
Before you clean the Blu-ray Disc’s cabinet,
be sure to disconnect the AC power cord
from the AC outlet.
Warning.......................................................2
Precautions .................................................3
Disc Storage & Management.......................3
•
•
Be careful not to put your hand into the disc slot.
Do not place anything other than the disc in the
disc slot.
• Do not use benzene, thinner, or other
solvents for cleaning.
BASIC FUNCTIONS
•
Interference from exterior sources such as
lightening and static electricity can affect the
normal operation of this player. If this occurs,
turn the player off and on again with the POWER
button, or disconnect and then reconnect the AC
power cord to the AC power outlet. The player
will operate normally.
GETTING STARTED
• Wipe the cabinet with a soft cloth.
Playing a Video..............................................19
Using the Disc Menu/Title Menu/
Before using the User Manual......................5
Accessories.................................................7
Front Panel..................................................8
Rear Panel...................................................8
Remote Control...........................................9
Restrictions on Playback
Popup Menu..................................................19
Using the Search and Skip Functions ............19
Slow Motion Play/Step Motion Play ...............20
Using the TOOLS button ...............................20
Listening to Music..........................................21
Playing back Pictures ....................................22
Playing back a USB Storage Device ..............22
• This player may not respond to all operating
commands because some Blu-ray Disc,
DVD, and CD discs allow specific or limited
operation and provide only certain features
during playback.
•
•
Be sure to remove the disc and turn off the
player after use.
Disconnect the AC power cord from the AC
outlet when you don’t intend to use the player for
long periods of time.
CONNECTIONS
Please note that this is not a defect in the
player.
A. Connecting to a TV .................................9
B. Connecting to an Audio System............10
C. Connecting to a Network ......................10
• Samsung cannot guarantee that this player
will play every disc bearing the Blu-ray
Disc, DVD or CD logo because disc
formats evolve, and problems and errors
may occur during the creation of Blu-ray
Disc, DVD, and CD software and/or the
manufacture of discs.
•
To clean a disc, wipe it in a
straight line from the inside to the
NETWORK SERVICES
outside of the disc.
•
•
Do not expose the player to any
BD-LIVE™.................................................23
Using the AllShare Function.......................23
SETUP
liquid.
When the AC plug is connected to a wall outlet,
the player will still draw power (standby mode)
when it is turned off.
The Initial Settings Procedure.....................12
Menu Navigation........................................12
Accessing the Settings Menu ....................12
Display ......................................................13
APPENDIX
Please contact the SAMSUNG customer
care center if you have questions or
encounter difficulty in playing Blu-ray Disc,
DVD, or CD discs in this player. Also, refer
to rest of this user manual for additional
information on playback restrictions.
•
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
The main plug is used as a disconnect device
and shall stay readily operable at any time.
Do not touch the power plug with a wet hand.
Otherwise, it can cause an electric shock.
Do not share one power socket with multiple
electric devices. Otherwise, it may cause an
overheat, resulting in a fire.
Troubleshooting.........................................23
Specifications............................................25
•
•
•
4
Disc types your player cannot play
Getting Started
•
•
HD DVD
•
•
DVD-RAM
•
•
DVD-RW(VR mode)
•
3.9 GB DVD-R Disc for
Authoring.
DVD-ROM/PD/MV-
Disc, etc
Super Audio CD
(except CD layer)
CVD/CD-ROM/CDV/
CD-G/CD-I/LD
Before using the User Manual
(CD-Gs play audio only,
not graphics.)
Disc Types and Contents your player can play
Logo
Icon
Content
Definition
NOTE
✎
Blu-ray Disc Compatibility
▪
Some commercial discs and DVDs discs purchased
outside your region may not play on this player.
Blu-ray Disc is a new and evolving format.
Accordingly, disc compatibility issues are
possible. Not all discs are compatible and
not every disc will play back. For additional
information, refer to the Compliance and
Compatibility Notice section of this user manual.
h
z
Indicates a function available on a BD-ROM or BD-RE/-R disc
recorded in the BD-RE format.
▪ Playback may not work for some types of discs,
or when you use specific operations, such as
angle change and aspect ratio adjustment.
Information about the discs is written in detail on
the disc box. Please refer to this if necessary.
▪ Do not allow the disc to become dirty or
scratched. Fingerprints, dirt, dust, scratches or
deposits of cigarette smoke on the recording
surface may make it impossible to use the disc
for playback.
Disc Types
BD-ROM
Indicates a function available on a DVD-VIDEO or recorded
DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded
and finalized.
Z
�
VIDEO
Blu-ray ROM discs can only be played back.
This player can play back pre-recorded
commercial BD-ROM discs.
▪ When you play a BD-J title, loading may take
longer than a normal title or some functions may
perform slowly.
Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-
RE/-R disc or in a USB storage media containing DivX, MKV, MP4
contents.
BD-RE/-R
-
�
o
�
G
▪ This player may not respond to all operating
commands because some Blu-ray Disc, DVD, and
CD discs allow specific or limited operation and
provide only certain features during playback.
Please note that this is not a defect in the player.
Blu-ray RE/-R discs can be recorded on and
played back.
Indicates a function available on an audio CD-RW/-R (CD-DA
format).
This player can play back a BD-RE/-R disc
recorded by other compatible Blu-ray Disc
recorders.
MUSIC
Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-
RE/-R disc or in a USB storage media containing MP3 or WMA
contents.
-
-
▪
Samsung cannot guarantee that this player will
play every disc bearing the Blu-ray Disc, DVD
or CD logo because disc formats evolve, and
problems and errors may occur during the creation
of Blu-ray Disc, DVD, and CD software and/or the
manufacture of discs.
DVD-VIDEO
Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-
RE/-R disc or in a USB storage media containing JPEG contents.
PHOTO
• This player can play back pre-recorded
commercial DVDs (DVD-VIDEO discs) with
movies.
NOTE
✎
▪ The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
▪ If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
▪ Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
▪ Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds
25 Mbps.
• When switching from the first layer to the
second layer of a dual-layered DVD-VIDEO
disc, there may be momentary distortion
in the image and sound. This is not a
malfunction of the player.
Please contact the SAMSUNG customer care
center if you have questions or encounter difficulty
when playing Blu-ray Disc, DVD, or CD discs in
this player. Also, refer to rest of this user manual
for additional information on playback restrictions.
5
AVCHD (Advanced Video Codec High
Definition)
DVD-RW/-R/+R
Supported File Formats
Region
Code
Disc Type
Area
This player can play back a DVD-RW/-R/+R
disc recorded and finalized with a DVD video
recorder. The ability to play back may depend
on recording conditions.
Notes on the USB connection
•
This player can play back AVCHD format
discs. These discs are normally recorded and
used in camcorders.
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
•
•
•
•
•
Your player supports USB storage media, MP3
players, digital cameras, and USB card readers.
A
B
C
1
•
•
The AVCHD format is a high definition digital
video camera format.
DVD+RW
The player does not support folder or file names
longer than 128 characters.
The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
Some AVCHD discs use the “x.v.Color”
format. This player can play back AVCHD
discs that use “x.v.Color” format.
“x.v.Color” is a trademark of Sony
Corporation.
Blu-ray
Disc
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
• This player can play back a DVD+RW
disc recorded with a DVD Video recorder.
The ability to play back may depend on
recording conditions.
Some USB/External HDD/digital camera devices
may not be compatible with the player.
•
Your player supports the FAT16, FAT32, and
NTFS files systems.
India, China, Russia, Central
Connect USB devices directly to the player’s
USB port. Connecting through a USB cable may
cause compatibility problems.
and South Asia.
Audio CD (CD-DA)
•
•
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle
East, Egypt, South Africa,
Greenland
• This player can play back CD-DA format
audio CD-RW/-R discs.
“AVCHD” and the AVCHD logo are
trademarks of Matsushita Electronic Industrial
Co., Ltd. and Sony Corporation.
•
Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
• The player may not be able to play some
CD-RW/-R discs due to the condition of
the recording.
2
3
NOTE
✎
•
•
The player does not support the PTP protocol.
▪
Some AVCHD format discs may not play,
depending on the recording condition.
AVCHD format discs need to be finalized.
Do not disconnect a USB device during a
“loading” process.
CD-RW/-R
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
•
•
The bigger the image resolution, the longer the
image takes to display.
•
Use a 700MB (80 minute) CD-RW/-R disc.
If possible, do not use an 800MB (90 minute) or
larger disc, as the disc may not play back.
If the CD-RW/-R disc was not recorded as a
closed session, you may experience delays
when playing back the beginning of the disc or
all recorded files may not play.
▪
▪
“x.v.Color” offers a wider colour range than
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
DVD-VIDEO
normal DVD camcorder discs.
This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
Some DivX, MKV and MP4 format discs may
not play, depending on the video resolution and
frame rate condition.
4
•
•
Your player only supports the video that is under
30fps (frame rate).
•
Some CD-RW/-R discs may not play on this player,
depending on the device which was used to burn
them. For contents recorded on CD-RW/-R media
from CDs for your personal use, playability may
vary depending on the contents and discs.
5
Region Code
Both players and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
China
6
Copyright
The Region Code for this player is displayed
on the rear panel of the player.
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this
user’s manual may be reproduced or copied
without the prior written permission of
Samsung Electronics Co.,Ltd.
6
Video File Support
File Extension
Music File Support
Container
Video Codec
DivX 3.11/4.x/5.1/6.0
MP4v3
Audio Codec
Resolution
1920x1080
1920x1080
File Extension
Container
Audio Codec
Support Range
MP3
*.mp3
MP3
-
MP3
Dolby DIgital
*.avi
AVI
DTS
WMA
PCM
*
*
Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
Bit rates - All bit-rates from 5kbps to 384kbps
*.wma
WMA
WMA
1920x1080
H.264 BP/MP/HP
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
VC-1 AP
DivX 5.1/6.0
H.264 BP/MP/HP
VC-1 AP
MP3
Dolby DIgital
DTS
Logos of Discs the player can play
*.mkv
MKV
*.wmv
*.mp4
WMA
AAC
WMV (wmv9)
MP4
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
PAL broadcast System in
U.K., France, Germany, etc
Blu-ray Disc
BD-LIVE
MP1, 2
Dolby DIgital
DTS
*.mpg
PS
Accessories
Check for the supplied accessories shown below.
*.mpeg
• Limitations
-
Even when the file is encoded by a supported codec mentioned above, a file might not be played if its
content has a problem.
- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.
- Files having higher Bit rate/frame rate than standard may stutter during sound/video playback.
- The Seek (skip) function is not available if the file’s index table is damaged.
• Video decoder
Batteries for Remote Control (AAA Size)
User Manual
- Supports up to H.264 Level 4.1and AVCHD
- Does not support H.264 FMO/ASO/RS, and VC1 SP/MP/AP L4.
- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
- Does not support GMC 2 or higher
Remote Control
• Audio decoder
- Supports WMA 7, 8, 9 and STD
- Does not support WMA sampling rate of 22050Hz mono.
7
Rear Panel
Front Panel
a
a b
c
bc
d
e
g
f
Use for network based services, BD-LIVE, and software upgrades using
a network connection.
LAN
1
DISC TRAY
Opens to accept a disc.
1
2
REMOTE CONTROL
Detects signals from the remote control.
Using an HDMI cable, connect this HDMI output terminal to the HDMI
input terminal on your TV for the best quality picture or to your AV
receiver for the best quality sound.
SENSOR
HDMI OUT
2
3
DISPLAY
OPEN/CLOSE BUTTON
POWER BUTTON
Displays the playing status, time, etc.
Opens and closes the disc tray.
Turns the player on and off.
3
4
5
DIGITAL AUDIO OUT
Connects to an AV receiver.
You can connect a USB memory flash stick here and use it as storage
when the player is connected to BD-LIVE. You can also use the USB Host
for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback.
USB HOST
6
7
PLAY/PAUSE BUTTON
NOTE
Plays a disc or pauses playback.
✎
▪ You can perform software upgrades using the USB Host jack with a USB flash memory stick only.
▪ When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on
the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then
press the ENTER button.
8
Remote Control
Connections
A. Connecting to a TV
Tour of the Remote Control
Connecting to a TV with an HDMI Cable - Best Quality
Turn the player on and off.
Turn the TV on and off.
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the
HDMI IN terminal of your TV. See page 11.
After setup, allows you to set the input
source on your TV.
Press to eject a disc.
TV volume adjustment.
2. Turn on the player and TV.
3. Press the input selector on your TV remote control until the HDMI signal from the player
appears on your TV screen.
Press numeric buttons to operate options.
NOTE
✎
▪
▪
An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.
Use to enter the disc menu.
Use to enter the popup menu/title menu.
If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High
speed (category 2) HDMI cable.
Press to skip backwards or forwards.
Press to search a disc backwards or
forwards.
Press to stop a disc.
Press to play a disc.
Press to pause a disc.
▪
HDMI outputs only a pure digital signal to the TV.
Press to move to the home menu.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
screen.
Use to access various audio functions on a
Press to switch the Blu-ray Disc/DVD’s
subtitle language.
disc (Blu-ray Disc/DVD).
▪
▪
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
your TV.
Press to use Tools menu.
Use to display the playback information
when playing a Blu-ray Disc/DVDs.
Use to select menu items and change menu
value.
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI
output resolution will be automatically set to the highest supported by the TV.
Return to the previous menu.
Press to exit the menu.
▪
▪
A long HDMI cable may cause screen noise. If this occurs, set Deep Color to Off in the menu.
These buttons are used both for menus on the
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
Out to an audio sytem to hear audio.
player and also several Blu-ray Disc functions.
Press to use the bonusview function.
Allows you to repeat A-B disc
Press to see the full screen on a TV.
Allows you to repeat a title, chapter, track
or disc.
Installing batteries
NOTE
✎
▪ If the remote does not operate properly:
• Check the polarity (+/–) of the batteries.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
!
CAUTION
▪ Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
9
B. Connecting to an Audio System
C. Connecting to a Network
This player lets you use network based services such as BD-LIVE, and download software
upgrades when it is connected to a network. We recommend using a Broadband modem (with
integrated router) or IP router for the connection. For more information on router connections,
refer to the user manual of the router or contact the router manufacturer for technical assistance.
Cable Network
•
Please turn the volume down when you turn on the AV receiver. A sudden loud sound
may cause damage to the speakers and your ears.
•
•
Please set the audio format according to the capabilities of your AV receiver.
The position of HDMI input terminals may vary depending on your AV receiver. Please
refer to the user manual of your AV receiver.
1. Using a Direct LAN (UTP) CAT 5 cable, connect the LAN terminal of the player to the LAN
Case 1 : Connecting to an Audio System (HDMI supported AV
receiver) - Best Quality (Recommended)
terminal of your modem or router. See page 11
2. Set the network options. See page 16.
NOTE
✎
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the
▪
Internet access to Samsung’s software update server may not be allowed, depending on the router you use
or your ISP’s policy. For more information, contact your ISP (Internet Service Provider).
HDMI IN terminal of your AV receiver. See page 11.
2. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN
terminal of your TV.
▪
▪
DSL users, please use a router to make a network connection.
To use the AllShare function, you must connect your PC to your network as shown in the figure.
The connection can be wired.
3. Turn on the player, TV, and AV receiver.
4. Using the input select button of the AV receiver and TV, select the correct HDMI input or
each to hear sound and see video from the player. Refer to your AV receiver’s user manual
to set the AV receiver’s audio input.
Case 2 : Connecting to an Audio System (AV receiver with Dolby
Digital or DTS decoder) - Better Quality
1. Using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of
the player to the DIGITAL AUDIO IN (COAXIAL) terminal of your AV receiver. See page 11.
2. Using an HDMI cable, connect the HDMI terminal on the rear of the player to the HDMI
terminal of your TV.
3. Turn on the player, TV, and AV receiver.
4. Press the input select button of the AV receiver to select the correct external input and hear
sound from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio
input.
5. Press the input selector on your TV remote control to select the HDMI video source.
10
Connecting to an Audio System
A
C
Connecting to a TV
B
Case 1 : HDMI cable
(not included)
HDMI cable
(not included)
Case 1 : HDMI cable
(not included)
Network
Case 2 : Coaxial cable
(not included)
Router
Broadband modem (with
integrated router)
service
Or
Broadband modem
Broadband
service
Broadband
Networking with PC for AllShare function
NOTE : You can only connect this unit to a network via a wired connection.
✎
11
Selects Videos.
Selects YouTube.
Selects Photos.
Selects Music.
Selects Settings.
1
2
3
4
5
Menu Navigation
Setup
7. The “Initial settings completed.” message
appears, and then the Home screen
appears.
The Initial Settings Procedure
1
2
1. Turn on your TV after connecting the
- If you Blu-ray player does not connect to your
network or you want to connect manually, go to
Network Setup on page 16.
player.
When you connect the player to a TV for the
first time, the player turn on automatically
and the Initial Settings screen appears.
3
4
NOTE
✎
Displays the buttons you can use on the
6
▪
The Home menu will not appear if you do not
configure the initial settings except as noted
below.
remote to access functions.
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
▪
If you press the BLUE (D) button during network
setup, you can access the Home menu even if
the network setup is not completed yet.
When you return to the Home menu, the full
screen mode is cancelled automatically.
If you want to display the Initial Setting screen again
HOME Button : Press to move to the Home
English
Accessing the Settings Menu
1
Français
Deutsch
Español
Italiano
menu.
To access the Settings menu and sub-menus,
RETURN Button : Return to the previous
▪
▪
follow these steps:
2
3
4
Nederlands
menu.
1. Press the POWER button.
>
Move
"
Select
ENTER / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
The Home Menu appears.
to make changes, press the PLAY/PAUSE (
)
2. Press the ◄► buttons to select Settings,
and then press the ENTER button.
3. Press the ▲▼ buttons to select the
desired submenu, and then press the
ENTER button.
button on the front panel of the player for more than
5 seconds with no disc inserted. This resets the
player to its default settings.
2. Use the ▲▼ buttons on the remote to
select the desired language, and then
press the ENTER button.
▪
▪
If you use an HDMI cable to connect the player
to an Anynet+(HDMI-CEC)-compliant Samsung
TV and 1.) You have set the Anynet+(HDMI-
CEC) feature set to On in both the TV and
the player and 2.) You have set the TV to a
language supported by the player, the player will
select that language as the preferred language
automatically.
EXIT Button : Press to exit the current
3. Press the ENTER button to select Start.
menu.
4. Press the ▲▼ buttons to select the desired
item, and then press the ENTER button.
5. Press the EXIT button to exit the menu.
4. Use the ▲▼ buttons to select an Aspect
Ratio, and then press the ENTER button.
• Home Menu
5. Select Auto, and then press the ENTER
button. If you do not have a home
network, press the BLUE (D) button on
your remote. You will go directly to the
Home menu.
NOTE
2
✎
▪
The access steps may differ depending on the
menu you selected. The OSD (On Screen Display)
may change in this player after you upgrade the
software version.
If you leave the player in the stop mode for more
than 5 minutes without using it, a screen saver
will appear on your TV. If the player is left in the
screen saver mode for more than 25 minutes,
the power will automatically turn off.
YouTube
6. The Blu-ray player automatically verifies
your wired network. When verification
in complete, the screen displays “Your
network is operating properly.” Press the
ENTER button.
3
4
Videos
1
5
6
No Disc
a
Change Device
d
View Devices
Enter
"
12
• 1080p : Outputs 1080 lines of progressive
• 720p : Outputs 720 lines of progressive
video.
BD Wise (Samsung Players only)
Display
video.
• 576p/480p : Outputs 576/480 lines of
BD Wise is Samsung’s latest inter-connectivity • 1080i : Outputs 1080 lines of interlaced
You can configure various display options
feature.
video.
progressive video.
such as the TV Aspect Ratio, Resolution, etc.
When you connect a Samsung player and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player and
TV, the player outputs video at the video resolution
and frame rate of the Blu-ray Disc/DVDs.
• Off : The output resolution stays fixed at
the resolution you set previously in the
Resolution menu, regardless of the resolution
of the disc.
Resolution according to the output mode
TV Aspect Ratio
• Blu-ray Disc/E-contents/Digital Contents playback
Depending on the type of television you have,
you may want to adjust the screen size setting.
HDMI / connected
HDMI Mode
• 16:9 Original : Select when you connect
the player to a 16:9 TV screen. The player
will display all content in its original aspect
ratio.
Output
Setup
Blu-ray Disc
E-contents/Digital contents
1080p
Max. Resolution of TV input
• On : The player outputs video at the original
resolution and frame rate of the Blu-ray
Disc/DVDs.
Content formatted in 4:3 will be displayed
with black bars on the left and right.
• 16:9 Full : Select when you connect the
player to a 16:9 TV screen. All content will
fill the full screen. Content formatted in 4:3
will be stretched.
BD Wise
Auto
Resolution of Blu-ray Disc
Max. Resolution of TV input
NOTE
✎
1080p@60F (Movie
1080p@60F
1080p@24F
1080p@60F
▪
▪
▪
When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
Frame : Off)
Movie Frame : Auto
(24Fs)
• 4:3 Letter Box : Select when you connect
the player to a 4:3 TV screen. The player will
display all content in its original aspect ratio.
Content formatted in 16:9 will be displayed
with black bars on the top and bottom.
1080p@24F
If the player is connected to a device that does
not support BD Wise, you can not use the BD
Wise function.
1080i
720p
576p/480p
1080i
720p
576p/480p
1080i
720p
576p/480p
For proper operation of BD Wise, set the BD Wise
• 4:3 Pan-Scan : Select when you connect
the player to a 4:3 TV screen. 16:9 content
will have the extreme left and right portions
cut off.
menu of both the player and the TV to On.
Resolution
• DVD playback
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p or
576p/480p. The number indicates the number
of lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher the quality.
HDMI / connected
HDMI Mode
576i/480i
Max. Resolution of TV input
NOTE
✎
Output
Setup
▪
Depending on the disc type, some aspect ratios
may not be available.
BD Wise
Auto
▪
If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
If you select the 4:3 Pan-Scan or 4:3 Letter
Box, pressing the FULL SCREEN button on the
remote will not bring up a full screen picture.
If you select the 16:9 Original, your TV may
display 4:3 Pillarbox (black bars on sides of
picture). If this occurs, pressing the FULL
SCREEN button on the remote will not bring up
a full screen picture.
• Auto : Automatically sets the output
resolution to the connected TV’s maximum
resolution.
1080p
1080i
720p
1080p
1080i
720p
▪
▪
• BD Wise : Automatically sets the resolution
to the resolution of the Blu-ray Disc/DVDs
if you have connected the player via HDMI
to a TV with the BD Wise feature. (The BD
Wise menu item appears only if BD Wise is
set to On. See BD Wise above.)
576p/480p
576p/480p
13
•
Bitstream (Unprocessed) : Choose if you want
your receiver to decode all the audio.
NOTE
✎
HDMI Color Format
Audio
▪
If the TV you connected to the player does not
Bonusview audio will not be available.
support Movie Frame or the resolution you
selected, the message “If no pictures are shown
after selecting ‘Yes’, please wait for 15 seconds
to return to the previous resolution. Do you want
to change the resolution?” appears. If you select
Yes, the TV’s screen will go blank for 15 seconds,
and then the resolution will revert to the previous
resolution automatically.
Lets you set the color space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
Digital Output
•
•
Bitstream (Re-encoded DTS) : The original
audio will be re-encoded into DTS.
Set the Digital Output to match the capabilities of
the AV receiver you’ve connected to the player :
Bitstream (Re-encoded Dolby D) : The original
• Auto : Automatically sets the player to the
audio will be re-encoded into Dolby Digital.
optimum format supported by your device.
•
PCM : This is the default setting. It is compatible
For more details, please refer to the Digital Output
Selection table.
• YCbCr (4:4:4) : If your TV supports the
YCbCr color space via HDMI, select this to
output the normal YCbCr color gamut.
Diwgiitthaml oOsut TtVpsuatnSderelceecivteiro. n
▪
If the screen stays blank after you have changed
the resolution, remove all discs, and then press and
• RGB (Standard) : Select to output the
normal RGB color gamut.
hold the PLAY/PAUSE
(
)
button on the front of
Bitstream
Bitstream
Bitstream
the player for more than 5 seconds. All settings are
restored to the factory default. Follow the steps on
the previous page to access each mode and select
the Display Setup that your TV will support.
• RGB (Enhanced) : If you have connected
the player to a DVI display device such as a
monitor, select this to output the enhanced
RGB color gamut.
Setting
PCM
(Re-encoded (Re-encoded
(Unprocessed)
DTS)
Dolby D)
HDMI
HDMI
HDMI
HDMI
▪
▪
When the factory default settings are restored, all
stored user BD data is deleted.
supported
supported
supported
supported
Connection
Coaxial
Coaxial
AV receiver or AV receiver or
AV
HDMI Deep Color
AV receiver
The Blu-ray Disc must have the 24 frame feature
for the player to use the Movie Frame (24Fs) mode.
Coaxial
Coaxial
receiver
Lets you output video from the HDMI OUT jack with
Deep Color. Deep Color provides more accurate
color reproduction with greater color depth.
• Auto : The player outputs video with Deep
Color to a connected TV which supports
HDMI Deep Color.
Up to PCM
Re-encoded
PCM
PCM 2ch
PCM
PCM 2ch DTS re-encoded
7.1ch
Dolby Digital *
Movie Frame (24Fs)
Re-encoded
Setting the Movie Frame (24Fs) feature to Auto
allows you to adjust the player’s HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
You can select Movie Frame only when the
player is in the HDMI 1080i or 1080p output
resolution modes.
Dolby Digital PCM 2ch
PCM 2ch Dolby Digital Dolby Digital DTS re-encoded
Dolby Digital
Dolby Digital *
Dolby Digital
PCM 2ch
Plus
Re-encoded
• Off : The picture is output without Deep Color.
PCM 2ch
Dolby Digital DTS re-encoded
Plus
Dolby Digital *
Audio
Stream on
Blu-ray
Disc
Progressive Mode
Re-encoded
Dolby TrueHD PCM 2ch
PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded
Dolby Digital *
Lets you improve picture quality when viewing DVDs.
• Auto : Select to have the player
Re-encoded
• Auto : Movie Frame (24Fs) functions work.
DTS
PCM 2ch
PCM 2ch
DTS
DTS
DTS
DTS re-encoded
DTS re-encoded
DTS re-encoded
Dolby Digital *
automatically select the best picture quality
for the DVD you’re watching.
• Off : Movie Frame (24Fs) functions are off.
Re-encoded
DTS-HD HRA PCM 2ch
DTS-HD MA PCM 2ch
PCM 2ch DTS-HD HRA
PCM 2ch DTS-HD MA
• Video : Select for the best picture quality
from concert or TV show DVDs.
Dolby Digital *
Re-encoded
DTS
Dolby Digital *
PCM
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
Audio
Stream on Dolby Digital PCM 2ch
PCM 2ch Dolby Digital Dolby Digital
PCM 2ch DTS DTS
DVD
DTS
PCM 2ch
14
Dynamic Range Control
PCM Downsampling
Bitstream
Bitstream
Bitstream
Setup
PCM
(Re-encoded (Re-encoded
(Unprocessed)
DTS)
Dolby D)
You can listen at low volumes, but still hear
dialog clearly.
Lets you set 48kHz and 96kHz PCM down-
sampling on or off.
HDMI
AV
HDMI
HDMI
This is only active if your player detects a
HDMI
• Off : Select when the AV receiver
connected to the player is 96kHz
compatible.
supported
supported
supported
receiver
supported
Connection
Coaxial
Coaxial
Dolby Digital signal.
AV receiver or AV receiver or
AV receiver
Coaxial
Coaxial
• Auto : The Dynamic Range Control will be
set automatically based on the information
provided by the Dolby TrueHD Soundtrack.
• Off : You can enjoy the movie with the
standard Dynamic Range.
• On : Select when the AV receiver
connected to the player is not 96kHz
compatible. 96kHz signals will be down
Decodes the main
feature audio
Decodes the main
feature audio
and BONUSVIEW
audio stream
Outputs only the main
and BONUSVIEW
converted to 48kHz
.
Decodes the main feature feature audio stream so that audio stream
audio and BONUSVIEW your AV receiver can decode together into PCM
together into PCM
audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into Dolby
digital bitstream
or PCM.
Definition
• On : When Movie soundtracks are played
at low volume or through smaller speakers,
the system can apply appropriate
NOTE
✎
for Blu-ray
Disc
Any
audio stream together
into PCM audio and adds
Navigation Sound Effects.
the audio bitstream.
You will not hear
audio and adds
Navigation Sound
Effects, then re-
▪
Even when PCM Downsampling is set to Off,
BONUSVIEW audio or
some discs will only output downsampled audio
through the coaxial digital outputs.
Navigation Sound Effects. encodes the PCM
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
audio into DTS
bitstream.
HDMI
* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting is not applied. Output will be
• If your TV is not compatible with
compressed multi-channel formats (Dolby
Digital, DTS), the player may output PCM
2ch downmixed audio even though you
selected Bitstream (either Re-encoded or
Unprocessed) in the setup menu.
LPCM 2ch.
Downmixing Mode
Blu-ray Discs may include three audio
streams :
▪
If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
digital, DTS), the audio signal outputs as PCM.
Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
Select Downmix method for stereo output.
• Normal Stereo : Downmix the multichannel
audio into normal stereo. Choose this if you
hear the sound from TV or Stereo Amplifier.
• Surround Compatible : Downmix
the multichannel audio into surround
compatible stereo. This mode helps your
AV Receiver to decode stereo into surround
sound.
-
Main Feature Audio : The audio soundtrack
▪
▪
▪
of the main feature.
-
BONUSVIEW audio : An additional
soundtrack such as the director or actor’s
commentary.
• If your TV is not compatible with PCM
sampling rates over 48kHz, the player may
output 48kHz downsampled PCM audio
even though you set PCM Downsampling
to Off.
Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
This Digital Output setup does not affect the
HDMI audio output to your TV. It affects the
coaxial and HDMI audio output when your player
is connected to an AV receiver.
-
Navigation Sound Effects : When you
choose a menu navigation selection, a
Navigation Sound Effect may sound.
Navigation Sound Effects are different on
each Blu-ray Disc.
▪
If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
NOTE
✎
▪
Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
15
5. The Auto Function acquires and fills in the
values for IP Address, Subnet Mask,
etc., automatically.
12. Enter the numbers as above.
13. Press the RETURN button on your
remote.
ƒ Windows 7
Network
1. Click the Network icon on the bottom right
of the Windows desktop.
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic
-and most are- we recommend using the
Auto procedure for network setup. This is
easiest and will work in the majority of cases.
If it is static, you must use the manual set up
procedure.
14. Run a Network Test to ensure the player
2. In the pop-up menu, click Network and
NOTE
✎
NethwasocroknTneecstetd to your network.
Sharing Center.
▪
This process can take up to five minutes.
3. On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
6. After the Network Function has acquired
the network values, press the RETURN
button.
Use this menu item to connect to the wired
network or check whether your network
connection is working or not.
4. On the Support tab, click the Details
button. The Network settings are
displayed.
7. Select Network Test, and then press
ENTER to ensure the player has connected
to your network.
Network setup directions start below.
NOTE
✎
To enter the Network Settings into your
Network Status
8. When the Network Test is complete, press
the RETURN twice to return to the Main
Menu.
▪
This unit can only be connected to a Network via
a wired connection.
player, follow these steps:
Use to check whether a connection to
the network and the Internet have been
established.
1. In the Home menu, press the ◄►
buttons to select Settings, and then
press the ENTER button.
9. If the Network Function does not acquire
the network values, go to the directions for
Manual Setup.
Automatic Network Setup
2. Press the ▲▼ buttons to select Network,
and then press the ENTER button.
3. Press the ▲▼ buttons to select Wired
Network Settings, and then press the
ENTER button. The Wired Network
Settings screen appears.
1. In the Home menu, press the ◄► buttons
to select Settings, and then press the
ENTER button.
BD-LIVE Internet Connection
Manual Network Setup
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
2. Press the ▲▼ buttons to select Network,
and then press the ENTER button.
3. Press the ▲▼ buttons to select Wired
Network Settings, and then press the
ENTER button. The Wired Network
Setting screen appears
Before you start manual network setup, you
need the network setting values.
• Allow (All) : The Internet connection is
4. Select the Internet Protocol Setup field,
and then press the ENTER button.
5. Press the ▲▼ buttons to select Manual,
and then press the ENTER button.
6. Press the ▼ button to go to the first entry
field (IP Address).
allowed for all BD-LIVE contents.
To get the Network setting values through
most Windows computers, follow these
steps:
• Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
• Prohibit : No Internet connection is allowed
for any BD-LIVE content.
ƒ Windows XP
Settings
Wired Network Settings
Displa
7. Use the number buttons on your remote
1. Right click the Network icon on the bottom
Internet Protocol Setup
IP Address
:
:
:
:
Auto
\
Audio
to enter numbers.
0
0
0
0
0
0
0
0
0
right of the Windows desktop.
0
0
0
Netwo
Syste
NOTE
✎
Subnet Mask
8. When done with each field, use the ►
button to move to the next field. You can
also use the other arrow buttons to move
up, down, and back.
2. In the pop-up menu, click Status.
Gateway
Langu
▪
What is a valid certificate?
SecurDNS
:
Auto
3. On the dialog that appears, click the
GenerDNS Server
Suppo
:
0
0
0
0
When the player uses BD-LIVE to send the disc data
and a request to the server to certify the disc, the
server uses the transmitted data to check if the disc
is valid and sends the certificate back to the player.
The Internet connection may be restricted while
you are using BD-LIVE contents.
Support tab.
>
Move
"
Select
'
Return
4. On the Support tab, click the Details
button. The Network settings are
displayed.
9. Enter the IP Address, Subnet Mask,
and Gateway values in the same way.
10. Press the ▼ button to go to DNS.
11. Press the ▼ button to go to the first DNS
entry field.
4. In the Internet Protocol Setup field, select
Auto if it is not selected. (Press ENTER
select AUTO, and then press ENTER.)
▪
16
BD Data Management
DVD Parental Rating
System
Language
Enables you to manage the downloaded
contents you accessed through a Blu-ray disc
that supports the BD-LIVE service and stored
on a flash drive.
This function works in conjunction with DVDs
that have been assigned an age rating or
numeric rating that indicates the maturity
level of the content. These numbers help you
control the types of DVDs that your family can
watch.
You can select the language you prefer for the
Initial Settings
Home menu, disc menu, etc.
• On-Screen Menu : Select the language for
the on-screen displays.
By using the Initial Settings function, you can
set the language, Network Settings, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of
this user manual (page 12).
You can check the device’s information
• Disc Menu : Select the language for the
disc menu displays.
including the storage size, delete the BD
Select the rating level you want to set.
For example, if you select Level 6, discs rated
above 6 - Level 7 and 8 - will not play.
A larger number indicates more mature
content.
data, or change the Flash memory device.
• Audio : Select the language for disc audio.
BD Data Management Screen Information :
• Total Size : Total memory size of the device.
• Available Size : Available memory in the
device.
• Subtitle : Select the language for disc subtitles.
NOTE
✎
Anynet+(HDMI-CEC)
▪
The selected language will only appear if it is
supported on the disc.
Anynet+ is a convenient function that offers linked
operations with other Samsung players that have
the Anynet+ feature.
YouTube Lock
NOTE
✎
Restrict the use of the YouTube service unless
a password is entered.
▪
In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.
Security
To operate this function, connect this player to an
Anynet+ Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY
• Off : Turn Off YouTube lock.
When you access this function for the first time,
the password setup screen appears. Enter a
desired 4-digit password using the number
buttons. (The default password is 0000.)
• On : Turn On YouTube lock.
▪
Only those USB devices formatted in FAT file
format (DOS 8.3 volume label) are supported.
We recommend you use USB devices that
support USB 2.0 protocol with 4 MB/sec or
faster read/write speed.
Change PIN
(
) button on the TV’s remote control.
Change the 4-digit password used to access
security functions.
For more information, please see the TV user
BD Parental Rating
manual.
▪
▪
The Resume Play function may not work after
you format the storage device.
Prevent playback of Blu-ray Discs with specific
age ratings unless a password is entered.
If you forgot your password
• Off : Anynet+ functions will not work.
• On : Anynet+ functions will work.
The total memory available to BD Data
Management may differ, depending on the
conditions.
1. Remove any discs.
• Off : BD Parental Rating is not active and
2. Press and hold the PLAY/PAUSE
(
)
NOTE
✎
all Blu-ray discs will play in full.
button on the front panel for 5 seconds or
▪
▪
▪
This function is not available if the HDMI cable
does not support CEC.
• On : This will prohibit playback of Blu-ray
disc rated above Parental Rating.
more.
All settings will revert to the factory settings.
DivX® Video On Demand
If your Samsung TV has an Anynet+ logo, then
it supports the Anynet+ function.
NOTE
✎
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
▪
When the factory default settings are restored,
all the user stored BD data will be deleted.
Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
17
▪
▪
Never turn the player off or back on manually
during the update process.
Auto Upgrade Notification
Contact Samsung
General
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
Samsung Electronics shall take no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during a software upgrade.
If you want to cancel the upgrade while the
upgrade software is downloading, press the
ENTER button.
Provides contact information for assistance
with your player.
Time Zone
You can specify the time zone that is
applicable to your area.
Terms of Service Agreement
▪
To set Auto Upgrade Notification on, follow
these steps:
View the general disclaimer regarding third
party contents and services.
1. Select Auto Upgrade Notification, and
then press the ENTER button.
Support
By USB
2. Use the ▲▼ buttons to select On, and then
press the ENTER button.
Reset
To upgrade by USB, follow these steps:
Software Upgrade
2. Download the latest USB software
upgrade zip archive to your computer.
3. Unzip the zip archive to your computer.
You should have a single RUF file with the
same name as the zip file.
If there is a new software version available,
the player notifies you with a popup message.
All settings will revert to the default except for
the network settings.
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
1. To upgrade the firmware, select Yes on the
Pop-up. The player turns off automatically,
then restarts, and begins the download.
(Never turn on the player manually here.)
2. The update progress popup appears.
3. When the update is complete, the player
turns off again automatically.
By Online
4. Copy the RUF file to a USB flash drive.
5. Make sure there is no disc in the player,
and then insert the USB flash drive into the
USB port of the player.
To upgrade By Online, follow these steps:
1. Select By Online, and then press the
ENTER button. The Connecting to Server
message appears.
6. In the player’s menu, go to Settings >
Support > Software Upgrade.
4. Press the POWER button to turn on the
player.
2. A popup message will appear if an update
7. Select By USB.
is available.
NOTE
✎
3. If you select Yes, the player will turn off
automatically before restarting.
(Never turn the player on during an
upgrade.)
NOTE
✎
▪
Update is complete when the player turns off
after restarting. Press the POWER button to turn
on the updated player for your use.
▪
No disc should be inserted in the product when
you upgrade the software using the USB Host
jack.
Never turn the player off or on manually during
the update process.
4. The update progress popup will appear.
When the update is completed, the player
will turn back off automatically.
5. Press the POWER button to turn on the
player.
▪
▪
▪
When the software upgrade is done, check the
software details in the software Upgrade menu.
Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
▪
Samsung Electronics shall take no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.
NOTE
✎
▪
The Update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
18
Using the Title Menu
Using the Search and Skip Functions
Basic Functions
During play, you can search quickly through a
chapter or track, and use the skip function to
jump to the next selection.
Playing a Video
Z
title 1
title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
TIPTLOEPMUEPNU
1. During playback, press the TITLE
MENU button on the remote control.
2. Press the ▲▼◄► buttons to make
the desired selection, then press the
ENTER button.
Playback
Searching for a Desired Scene
hzZ��
1. Press the OPEN/CLOSE
(
)
button to
• Audio CD (CD-DA)
open the disc tray.
2. Place a disc gently into the tray with the
NOTE
✎
•
During playback, press the SEARCH (
)
track 1
track 2
track 3
track 4
track 5
file 3
disc’s label facing up.
▪
Depending on the disc, the menu items may
button.
3. Press the OPEN/CLOSE (
) button
differ or this menu may not be available.
Each time you press the SEARCH (
)
to close the disc tray.
button, the playback speed will change as follows:
4. Press the PLAY (
) button.
Playing the Title List
• MP3, WMA, DivX, MKV and MP4
BD-ROM,
)
1
)
2 ) 3
Playback related buttons
BD-RE/-R,
DVD-RW/-R,
DVD+RW/+R,
DVD-VIDEO
) 4 ) 5 ) 6 ) 7
folder (group) 1
folder (group) 2
z
file 1 file 2
file 1
file 2
(
1
(
2 ( 3
Starts playback.
Stops playback.
PLAY (
)
DISC MENU
1. During playback, press the DISC
MENU or TITLE MENU button.
( 4 ( 5 ( 6 ( 7
2. Press the ▲▼ buttons to select an
entry you want to play from the TitleTITLE MENU
)
(
1
)
(
2
)
(
3
3
DivX, MKV,
•
•
If you press the button once : The
stop position is memorized.
POPUP
MP4
1
2
STOP (
)
List, and then press the ENTER
If you press the button twice : The
Using the Disc Menu/Title Menu/
Popup Menu
button.
NOTE
• To return to normal speed playback, press
stop position is not memorized.
✎
the PLAY (
) button.
Pauses playback.
PAUSE (
)
▪
If your disc has a playlist, press the GREEN (B)
NOTE
✎
Using the Disc Menu
button to go to the playlist.
▪
The player does not play sound in search mode.
NOTE
✎
Using the Popup Menu
▪
For some discs, pressing the STOP (
)
button
hZ
Skipping Chapters
once may not memorize the stop position.
DISC MENU
▪
Video files with high bit rates of 20Mbps or
more strain the player’s capabilities and may
stop playing during playback.
1. During playback, press the DISC
h
MENU button on the remote
hzZ��
TIPTLOEPMUEPNU
1. During playback, press the POPUP
MENU button on the remote control.
2. Press the ▲▼◄► buttons or ENTER
button to select the desired menu.
control.
• During playback, press the SKIP (
)
2. Press the ▲▼◄► buttons to make a
selection, and then press the ENTER button.
button.
Disc Structure
If you press the SKIP (
If you press the SKIP (
) button, the
disc moves to the next chapter.
NOTE
✎
NOTE
✎
The content of discs are usually divided as
shown below.
) button, the
▪
Depending on the disc, the menu items may
differ or this menu may not be available.
▪
Depending on the disc, the menu items may
disc moves to the beginning of the chapter.
One more press makes the disc move to
the beginning of the previous chapter.
differ or this menu may not be available.
• Blu-ray Disc, DVD-VIDEO
19
3. Press the REPEAT A-B button at the point
where you want repeat play to stop (B).
4. To return to normal play, press the REPEAT
A-B buttons to select Off.
▪
▪
Some Blu-ray Discs may allow you to select
either the PCM or Dolby digital audio soundtrack
in English.
Moving to a Desired Scene
Directly
Slow Motion Play/Step Motion Play
Slow Motion Play
If you press the AUDIO button on the remote
control, the Audio bar appears.
hzZ�
NOTE
Press the RETURN button to remove the Audio bar.
✎
1. During playback, press the TOOLS button.
2. Press the ▲▼ buttons to select Title,
Chapter or Playing Time.
hzZ��
▪
If you set point (B) less than 5 seconds of
playing time after point (A), a prohibition
message appears.
Selecting the Subtitle Language
hZ�
• In pause mode, press the SEARCH (
)
button.
3. Press the ◄► or number button to select
the desired Title, Chapter or Playing Time,
then press the ENTER button.
▪
Depending on the disc, the menu items may
differ and this menu may not be available.
Each time you press the SEARCH (
)
button, the playback speed will change as
follows:
*
1/8
*
1/4
*
1/2
SUBTITLE
You can also operate this function
• To return to normal speed playback, press
Selecting the Audio Language
hzZ�
by pressing the SUBTITLE
Repeating the Title or Chapter
the PLAY (
) button.
button on the remote control.
NOTE
✎
hzZ�
1. During playback, press the TOOLS button.
2. Press the ▲▼ buttons to select Subtitle.
3. Press the ◄► buttons to select the
desired subtitle language.
▪
The player does not play sound in Slow mode.
AUDIO
Lets you repeat the disc title or chapter.
Depending on the disc, the Repeat function
may not be available.
You can also operate this function
by pressing the AUDIO button on
Step Motion Play
the remote control.
REPEAT
1. During playback, press the
NOTE
✎
hzZ��
• In pause mode, press the PAUSE (
REPEAT button.
1. During playback, press the TOOLS button.
2. Press the ▲▼ buttons to select Audio.
3. Press the ◄► buttons to select the
desired audio language.
▪
Depending on the Blu-ray Disc / DVD, you may
be able to select the desired subtitle in the Disc
Menu. Press the DISC MENU button.
2. Press the ▲▼ buttons to select
Chapter or Title, then press the
ENTER button.
)
button.
▪
This function depends on the selection of
subtitles that are encoded on the disc and may
not be available on all Blu-ray Discs/DVDs.
Each time you press the PAUSE (
button, a new frame appears.
)
3. To return to normal play, press the
REPEAT button again.
NOTE
✎
• To return to normal speed playback, press
4. Press the ▲▼ buttons to select Off, then
▪
The ◄► indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
▪
▪
A Blu-ray Disc can contain up to 255 subtitle
the PLAY (
) button.
press the ENTER button.
languages and a DVD up to 32.
Information about the main feature/BONUSVIEW
NOTE
✎
▪
Information about the main feature/BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
Repeating a Section
mode will also appear if the Blu-ray Disc has a
▪
The player does not play sound in step mode.
BONUSVIEW section.
▪
▪
▪
This function changes both the primary and
secondary subtitles at the same time.
The total number of primary and secondary
subtitles are displayed respectively.
If you press the SUBTITLE button on the remote
control, the subtitle bar appears.
Press the ◄► button to switch between main
feature and BONUSVIEW audio modes.
This function depends on the selection of audio
languages encoded on the disc and may not be
available.
hzZ�
Using the TOOLS button
REPEAT
1. During playback, press the REPEAT
▪
▪
A-B button.
A-B
During playback, you can operate
the disc menu by pressing the
TOOLS button.
2. Press the REPEAT A-B button at the
point where you want repeat play to
start (A).
A Blu-ray Disc can contain up to 32 audio
languages and a DVD up to 8.
Press the RETURN button to remove the subtitle
bar.
NOTE
✎
▪
Depending on the disc, the Tools menu may
differ.
20
Repeat Modes :
Audio CD (CD-DA)/MP3 Screen
Elements
Setting BONUSVIEW
Changing the Camera Angle
Tracks on a disc are
played in the order
Audio CD
h
Off
hZ
(CD-DA)/MP3 in which they were
1
2
3
The BONUSVIEW feature allows you to view
additional content (such as commentaries)
in a small screen window while the movie is
playing.
When a Blu-ray Disc/DVD contains multiple
angles of a particular scene, you can use the
ANGLE function.
recorded on the disc.
Current track is
repeated.
Playlist
1/6
Audio CD
(CD-DA)
TRACK 001
(
(
(
) Track
) One
) All
TRACK 001
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
05:57
04:27
04:07
1. During playback, press the TOOLS button.
2. Press the ▲▼ buttons to select Angle.
3. Press the ◄► buttons to select the
desired Angle.
This function is only available if the disc has
the Bonusview feature.
Current track is
MP3
7
6
03:41
repeated.
+
00:08 / 05:57
03:17
1. During playback, press the
Audio CD
All tracks are
03:35
TOOLS button.
(CD-DA)/MP3 repeated.
Pause
Tools
Return
"
'
CD
Selecting the Picture Settings
hzZ�
2. Press the ▲▼ buttons to
select BONUSVIEW Video or
BONUSVIEW Audio.
The random option
Audio CD
plays a disc’s tracks
in random order.
(
)Shuffle
5
4
(CD-DA)/MP3
3. Press the ◄► buttons to select the
desired Bonusview.
This function enables you to adjust video
Displays the music information.
Displays the playlist.
Display the current track/total tracks.
Displays buttons available.
Shows the current play time/total play time.
Displays the current playback status.
Displays the repeated playback status.
1
2
3
4
5
6
7
quality when the player is connected to a TV.
Playlist
NOTE
✎
1. During playback, press the TOOLS button.
▪
If you switch from BONUSVIEW Video,
BONUSVIEW Audio will change automatically in
accordance with BONUSVIEW Video.
1. Insert an Audio CD (CD-DA) or an MP3
Disc into the disc tray.
2. Press the ▲▼ buttons to select Picture
Setting, and then press the ENTER
button.
• For an Audio CD (CD-DA), the first track
plays automatically.
3. Press the ◄► buttons to select the
Listening to Music
• For an MP3 disc, press the ◄► buttons
to select Music, then press the ENTER
button.
desired Picture Setting
.
• Dynamic : Choose this setting to
Playing an Audio CD (CoD-DA)�/MP3
2. To move to the Music List, press the
increase Sharpness.
STOP (
) or RETURN button.
• Normal : Choose this setting for most
The Music List screen appears.
3. Press the ▲▼◄► buttons to move to a
desired track, then press the YELLOW (C)
button to check the desired track.
Repeat this procedure to select additional
tracks.
viewing applications.
Repeat an Audio CD (CD-DA)/
MP3
• Movie : This is the best setting for
1. Insert an Audio CD (CD-DA) or an MP3
watching movies.
Disc into the disc tray.
• User : Lets you adjust the sharpness
and noise reduction function
respectively.
• For an Audio CD (CD-DA), the first
track plays automatically.
1. During the Playlist playback, press
• For an MP3 disc, press the ◄►
buttons to select Music, then press
the ENTER button.
the TOOLS button.
4. If you want to remove a track from the
playlist, go to the track, and then press the
YELLOW (C) button again. The track is
removed.
2. Select Repeat Mode, and then
press the ◄► buttons to select
the desired repeat mode.
NOTE
✎
▪
When you use BD wise function, this menu will
not appear.
2. Press the ▲▼ buttons to select the track
you want to play, and then press the
ENTER button.
5. Press the ENTER button to play the
selected tracks.
3. Press the ENTER button
.
The selected tracks will play automatically.
21
• Background Music : Select to listen to
6. To go to the Music List, press the STOP (
)
Playing back a USB Storage Device
YouTube
music while viewing a slide show.
or RETURN button.
• Zoom : Select to enlarge the current
7. To go to the Playlist, press the ENTER
You can use the USB connection to play
multimedia files (MP3, JPEG, DivX, etc) located
on a USB storage device.
picture. (Enlarged up to 4 times)
button.
• Rotate : Select to rotate the picture. (This
will rotate the picture either clockwise or
counter clockwise.)
NOTE
✎
1. Move to the Home menu.
2. In Stop mode, connect the USB storage
device to the USB port on the front panel
of the player.
▪
You can create a playlist with up to 99 tracks on
Audio CDs (CD-DA).
• Information : Shows the picture information
123
d
Home
Enter
"
including the name and size, etc.
-1
5 . Press the ◄► buttons to select USB,
The message “Do you want to access the
device?” will be displayed.
NOTE
Playing back Pictures
✎
then press the ENTER button.
▪
To enable the background music function, the
-1
6 . Press the ▲▼ buttons to select the
3. Press the ◄► button to select Yes, then
photo file must be in the same storage media as
the music file. However, the sound quality can
be affected by the bit rate of the MP3 file, the
size of the photo, and the encoding method.
desired Videos, Music or Photos, then
G
press the ENTER button.
press the ENTER button.
4. Press the RED (A) button or BLUE (D)
button.
Playing JPEG files
7. For playing back Video, Music or Photo
files see pages 19~22.
If you pressed the RED (A) button, go to
1. Insert a JPEG disc into the disc tray.
2. Press the ◄► buttons to select Photos,
and then press the ENTER button.
3. Press the ▲▼◄► buttons to select the
folder you want to play, and then press the
ENTER button.
▪
Start Slide Show and Stop Slide Show alternate,
depending on whether you are running a slide
show or not.
Step 5.
NOTE
✎
If you pressed the BLUE (D) button, go to
▪
You must remove the USB storage device
safely (by performing the “Safely Remove USB”
function) in order to prevent possible damage
to the USB memory. Press the MENU button to
move to the Home menu, select the YELLOW (C)
button, and then press the ENTER button.
When the Audio-CD (CD-DA), MP3 or JPEG files
are in stop mode, pressing the FULL SCREEN
button on the remote will not bring up a full
screen picture.
-1
Step
4
.
Playing Selected Photos
YouTube
You can select spesific photos to play pressing
the YELLOW (C) button on your remote. To
select specific photos, follow these steps:
4. Press the ▲▼◄► buttons to select the
photo you want to play, and then press the
ENTER button.
▪
▪
1. Select the folder that contains the photos
you want to view, and then press the
ENTER button.
No Disc
123
NOTE
✎
DLNA
123
▪
You can’t enlarge the subtitle and PG graphic in
a
Change Device
c
Safely Remove USB
d
View Devices
Enter
"
2. Press the ▲▼◄►buttons to select a
photo you want to play, and then press
the YELLOW (C) button. A check mark
appears on the photo.
If you insert a disc when playing a USB storage
device, the device mode changes to “DVD or
CD” automatically.
the full screen mod
e.
5. Press the ▲▼ buttons to select USB,
Using the TOOLS button
then press the ENTER button.
3. Repeat Step 2 for each photo you want to
You can use various functions by
6. Press the ◄► buttons to select the
desired Videos, Music or Photos, then
press the ENTER button. Go to Step 7
play.
pressing the TOOLS button.
NOTE
✎
• Start Slide Show : Select to start
the slide show.
-1
▪
To deselect a photo, press the ▲▼◄►buttons
to highlight the photo, and then press the
YELLOW (C) button.
4 . If you pressed the BLUE (D) button, the
• Stop Slide Show : Select if you want to
-1
screen below appears. Go to 5 .
stop the slide show.
• Slide Show Speed : Select if you want to
4. Press the ENTER button when done. The
adjust the Slide Show speed.
slide show starts.
22
Appendix
Network Services
You can enjoy various network services such
as BD-LIVE by connecting the player to your
network.
Troubleshooting
Using the AllShare Function
AllShare lets you play music, video, and photo
Before requesting service, please try the following solutions.
files located in your PC or NAS on the player.
Read the following instructions before
using any network service.
PROBLEM
SOLUTION
To use AllShare with your player, you must
connect the player to your network (See
pages 10~11).
1. Connecting the player to the network
No operation can be
performed with the
remote control.
•
•
•
Check the batteries in the remote control. They may need replacing.
(pages 10 and 11).
Operate the remote control at a distance of no more than 6,1 m.
To use AllShare with your PC, you must install
2. Configuring the network settings
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to reset it.
Reinstall batteries and try to operate the remote control again.
AllShare software on your PC.
(page 16).
If you have NAS, you can use AllShare without
any additional software.
Disc does not play.
•
•
Ensure that the disc is installed with the label side facing up.
BD-LIVE™
Check the region number of the Blu-ray Disc/DVD.
To download AllShare software
Once the player is connected to the network,
you can enjoy various movie-related service
contents using a BD-LIVE compliant disc.
Disc Menu does not
appear.
•
Ensure that the disc has disc menus.
1. Go to Samsung.com
2. Click Support, enter your player’s product
number in the field that appears, and then
click Product.
1. Attach a USB memory stick to the USB
jack on the side of the player, and then
check its remaining memory. The memory
device must have at least 1GB of free
space to accommodate the BD-LIVE
services.
The prohibition message
•
•
This message appears when an invalid button is pressed.
appears on the screen.
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g.,
angles).
3. On the next screen, click Get downloads
under Downloads.
•
You’ve requested a title or chapter number or search time that is out of
4. Click Software on the next page.
5. Click the icon in the AllShare line under File
to start the download.
range.
Play mode differs from the
Setup Menu selection.
•
Some of the functions selected in the Setup Menu may not work properly
if the disc is not encoded with the corresponding function.
2. Insert a Blu-ray Disc that supports BD-
LIVE.
Playing content located in your PC
3. Select an item from various BD-LIVE
service contents provided by the disc
manufacturer.
on the Blu-ray Disc Player
The screen ratio cannot
•
•
The Screen Ratio is fixed on your Blu-ray Disc/DVD.
be changed.
This is not a problem with the player.
You can view shared files of your computer
to your Blu-ray Disc Player.
No audio.
•
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
NOTE
✎
You can get detailed instructions for using
▪
The way you use BD-LIVE and the provided contents AllShare from the Samsung.com web site.
may differ, depending on the disc manufacturer.
The screen is blocked
•
If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
•
•
Press the PLAY/PAUSE (
) button (on front panel) for more than 5
Blu-ray Disc Player
Play back PC’s files
seconds with no disc inside. All settings will revert to the factory settings.
When the factory default settings are restored, all stored user BD data is
AllShare Connection
deleted.
23
PROBLEM
SOLUTION
PROBLEM
BD-LIVE
SOLUTION
Forgot password
•
Press the PLAY/PAUSE (
) button (on front panel) for more than
5 seconds with no disc inside. All settings including the password will
revert to the factory settings.
I cannot connect to the BD-
•
Check whether the network connection is successful or not by using the Network
Status menu.
LIVE server.
Don’t use this unless absolutely necessary.
•
•
Check whether the USB memory device is connected to the player.
The memory device must have at least 1GB of free space to accommodate the BD-
LIVE service.
•
•
When the factory default settings are restored, all stored user BD data
is deleted.
If you experience other
problems.
Go to the contents and find the section of the user manual that
contains the explanations regarding the current problem, and follow the
procedure once again.
You can check the available size in BD Data Management.
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
If all above fails, contact the contents provider or update the player to the latest
firmware.
•
•
•
If the problem still cannot be solved, please contact your nearest
Samsung authorized service center.
When using the BD-LIVE
service, an error occurs.
•
The memory device must have at least 1GB of free space to accommodate the BD-
The picture is noisy or
distorted
•
•
Make sure that the disc is not dirty or scratched.
Clean the disc.
LIVE service.
You can check the available size in BD Data Management.
No HDMI output.
•
Check the connection between the TV and the HDMI jack of the player.
Check if your TV supports 576p/480p, 720p, 1080i, 1080p HDMI input
resolution.
NOTE
✎
•
▪
When the factory default settings are restored, all stored user BD data is deleted.
Abnormal HDMI output
screen.
•
•
If random noise appears on the screen, it means that TV does not
Repairs
support HDCP (High-bandwidth Digital Content Protection).
If you contact us to repair your player, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the product.
2. You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit
or begin any work on your player.
AllShare function
I can see folders shared
through AllShare, but I
cannot see the files.
AllShares shows only files corresponding to the Image, Music, and
Movie categories. Files that do not correspond to these categories may
not be displayed.
We recommend you read this manually thoroughly, search for a solution on line at www.
samsung.com, or contact Samsung Customer Care before seeking to repair your player.
Video is played
•
•
Check if the network is stable.
intermittently.
Check if the network cable is properly connected and if the network is
not overloaded.
AllShare connection
between Player and PC
is unstable.
•
•
The IP address under the same subnetwork should be unique. If they
are not, IP interference can cause this phenomenon.
Check if you have a firewall enabled.
If so, disable the firewall function.
24
Specifications
Weight
1.3 Kg
Dimensions
360 (W) X 193 (D) X 41 (H) mm
+5°C to +35°C
General
Operating Temperature Range
Operating Humidity Range
Type A
10 % to 75 %
USB 2.0
USB
DC Output
5V 500mA Max.
Video
1080p, 1080i, 720p, 576p/480p
PCM, Bitstream
HDMI
Audio
Audio Output
Network
Digital Audio Output
Ethernet
Coaxial
100BASE - TX Terminal
-
-
It is not supported when the network speed is below or equal to 10 Mbps.
Design and specifications are subject to change without prior notice.
- For the power supply and power consumption, refer to the label attached to the
product.
-
Weight and dimensions are approximate.
25
•
•
•
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect
your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-
protected Blu-ray Disc/DVDs.
Compliance and Compatibility Notice
NOT ALL discs are compatible
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display,
distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other materials may
subject you to civil and/or criminal liability.
•
Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type and
Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-
VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies of some
commercially-produced film and videos and their soundtracks. When a prohibitet use of an unauthorized
copy is detected, a message will be displayed and playback or copying will be interrupted. More information
cinavia.com. To request additional information about Cinavia by email, send a postcard with your mailing
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138, USA.
This product incorporates proprietary technology under licence from Verance Corporation and is protected
by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued and pending as well as copyright
and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance
Corporation. Copyright 2004-2010 Verance Corporation. All right reserved by Verance. Reverse engineering
•
•
Discs other than the above cannot and/or is not intended to be played by this player. And some of the above discs may
not play due to one or more reasons provided below.
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to all operating
commands or operate all features of every disc. These and other disc compatibility and player operation issues with new
and existing format discs are possible because:
-
Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs because some
features may be optional, additional features may have been added to the Blu-ray
Disc format after the production of this player, and certain available features may be subject to delayed availability;
-
-
-
-
not all new and existing disc format versions are supported by this player;
or disassembly is prohibited.
new and existing disc formats may be revised, changed, updated, improved and/or supplemented;
some discs are produced in a manner that allows specific or limited operation and feature during playback;
Network Service Disclaimer
some features may be optional, additional features may have been added after the production of this player or certain
available features may be subject to delayed availability;
All content and services accessible through this device belong to third parties and are protected by copyright,
patent, trademark and/or other intellectual property laws. Such content and services are provided solely for
your personal noncommercial use. You may not use any content or services in a manner that has not been
authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized
by the applicable content owner or service provider, you may not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or
-
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
-
-
-
-
some discs may not be played depending on their physical state or recording conditions;
problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the manufacture of discs;
this player operates differently than a standard DVD player or other AV equipment; and/or
for reasons noted throughout this user manual and for other reason(s) discovered and posted by SAMSUNG
customer care center.
services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT
GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT
OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR
ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN,
OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF
•
•
•
If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer care center.
You may also contact SAMSUNG customer care center for possible updates on this player.
For additional information on playback restrictions and disc compatibility, refer to the Precautions, Before Reading the
user manual, Disc Types and Characteristics, and Before Playing sections of this user manual.
For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED
IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no representation
or warranty that any content or service will remain available for any period of time. Content and services are
transmitted by third parties by means of networks and transmission facilities over which Samsung has no
control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility or
liability for any interruption or suspension of any content or service made available through this device.
Copy Protection
•
Because AACS (Advanced Access Content System) is approved as content protection system for
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions
are imposed on playback, analog signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your time of purchase
as those restrictions may be adopted and/or changed by AACS after the production of this product.
Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for Blu-ray Disc
format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+
protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please
contact SAMSUNG customer care center.
Samsung is neither responsible nor liable for customer service related to the content and services. Any
question or request for service relating to the content or services should be made directly to the respective
content and service providers.
26
License
• Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
• Manufactured under license under U.S. Patent Nos : 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol, & DTS and the symbol together are registered trademarks & DTS
2.0+ Digital Out is a trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
• DivX
®
-
ABOUT DIVX VIDEO : DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation.
®
This is an DivX Certified device that plays DivX video.
®
-
ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for
more information on how to complete your registration.
®
®
-
-
DivX Certified to play DivX video up to HD 1080p, including premium content.
®
®
DivX , DivX Certified and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under lisence.
-
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners
• Open Source License Notice
-
In the case of using open source software, Open Source Licenses are available on the
product menu.
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Area
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
Contact Centre
Web Site
Area
` Middle East
U.A.E
Contact Centre
Web Site
1300 362 603
800-SAMSUNG (726-7864)
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
OMAN
800-SAMSUNG (726-7864)
183-2255
KUWAIT
BAHRAIN
Egypt
8000-4726
HONG KONG
08000-726786
800-22273
1800 1100 11
JORDAN
IRAN
3030 8282
INDIA
021-8255
1800 3000 8282
1800 266 8282
Morocco
Saudi Arabia
` Africa
NIGERIA
080 100 2255
9200-21230
0800-112-8888
021-5699-7777
INDONESIA
MALAYSIA
1800-88-9999
0800-726-7864
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
0800-10077
Ghana
0302-200077
PHILIPPINES
Cote D’ Ivoire
8000 0077
Senegal
800-00-0077
SINGAPORE
THAILAND
1800-SAMSUNG(726-7864)
Cameroon
KENYA
7095- 0077
1800-29-3232
02-689-3232
0800 724 000
0800 300 300
0685 88 99 00
0860-SAMSUNG(726-7864 )
UGANDA
0800-329-999
0266-026-066
TAIWAN
VIETNAM
TANZANIA
SOUTH AFRICA
1 800 588 889
AK68-02164A-00
|