LYT2154-002B
EN
HD MEMORY CAMERA
U/E/AA
GC-FM1
Detailed User Guide
ENGLISH
Safety Precautions for the Camcorder
To reduce the risk of fire, electrical shock, and injury to
person, carefully follow these instructions.
If this symbol is shown, it is only valid in
the European Union.
• Do not expose this product to liquid, rain, moisture, or
• eDxotrneomteditseamsspeemrabtluerethsi.s unit.
• Do not insert foreign objects into the this unit - this
Dear Customer,
[European Union]
may cause damage to internal components or cause
This apparatus is in conformance with the valid
• iInt jisurryectoomyomue. nded to charge the battery connecting to
• PDCownoitthcthhaergUeSBthcisabplreo.duct if damaged, or has been
• Dimomneortssetdorine tlihqiusiudns.it in extreme cold or high
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan,
Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
• tIfetmhepeLrCaDtubrereaarkesa,sd. o not touch the glass or liquid.
• Do not attempt to remove or replace the battery.
•
61145 Friedberg
Germany
• DDoo nnoottaptutenmctputretoodriisnacsisneemrabtlee tohrerebpaatitretrhye. camcorder.
• Do not dispose of this unit improperly. Check with local
SOME DO’S AND DON’TS ON THE SAFE USE OF
EQUIPMENT
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken if you are to
obtain the best results and safety is to be assured.
DO read the operating instructions before you attempt to use
the equipment.
DO ensure that all electrical connections (including the mains
plug, extension leads and interconnections between pieces
of equipment) are properly made and in accordance with
the manufacturer’s instructions. Switch off and withdraw the
mains plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any
doubt about it working normally, or if it is damaged in any
way — switch off, withdraw the mains plug and consult your
dealer.
• cDoisdpeossfeoropf broaptteerrdieisspaoccsaolrdreinggultaotilooncsa.l and national
• rNeegvuelratailolonws. children to play with this unit small parts
• Ombasyebrveeaccahuotikoinngwhhaeznaruds.ing this unit strap to prevent
• sWtrhaennguulsaintigonth. e camcorder with a tripod, attach the
camcorder to the tripod securely.
Product Care
• Operating and storage temperatures 5 °C to +40 °C
• Do not drop this unit or subject it to excessive shock or
• vDiobrnaotitouns.e liquid or aerosol cleaners, as they may
• dKEaEmPaTgHeISthIeNSuTnRitUoCrTtIhOeNfiSnFisOhRoFfUthTeUpRrEoRdEuFcEtR. ENCE.
CAUTION:
• Dispose of used batteries according to the instructions.
• Risk of explosion if battery is replaced by an incorrect
type.
DON’T remove any fixed cover as this may expose dangerous
voltages.
DON’T leave equipment switched on when it is unattended
unless it is specifically stated that it is designed for
unattended operation or has a standby mode. Switch off
using the switch on the equipment and make sure that your
family knows how to do this. Special arrangements may need
to be made for infirm or handicapped people.
ATTENTION:
On placing the unit: Some TVs or other appliances
generate strong magnetic fields. Do not place such
appliances on top of the unit as it may cause picture
disturbance.
DON’T use equipment such as personal stereos or radios so
that you are distracted from the requirements of road safety.
It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can
permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example
with curtains or soft furnishings. Overheating will cause
damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with
wood screws — to ensure complete safety always fit the
manufacturer’s approved stand or legs with the fixings
provided according to the instructions.
Remember that this camcorder is intended for
private consumer use only.
Any commercial use without proper permission is prohibited.
(Even if you record an event such as a show, performance
or exhibition for personal enjoyment, it is strongly
recommended that you obtain permission beforehand.)
Trademarks
• HDMI is a trademark of HDMI
• LWicinednosiwngs®, LisLCei.ther registered trademark or
trademark of Microsoft Corporation in the United
• SMtaacteinstaonsdh/iosraortehgeirstceoruednttrriaeds.emark of Apple Inc.
DON’T allow electrical equipment to be exposed to rain or
moisture.
• iPod, iTunes are trademarks of Apple Inc., registered
ABOVE ALL
• iYnotuhTeubUe.Sa. nanddthoethYeorucTouubnetlroiegso. are trademarks
• NEVER let anyone especially children push anything
into holes, slots or any other opening in the case — this
• aOntdhe/orrprreogdiustcetreanddtrcaodmempaanrkysnoafmYoeusTinucbleudLeLCd.in
this instruction manual are trademarks and/or
registered trademarks of their respective holders.
• cNoEuVlEdRregsuueltssinoar tfaaktaelcehleacntcreicsawl sihthocekle;ctrical equipment
of any kind — it is better to be safe than sorry!
3
Table of Contents
Names of Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Attaching the Hand Strap. . . . . . . . . . . . . . . . . . . . . . . . . 6
Indications on LCD monitor. . . . . . . . . . . . . . . . . . . . . . . 6
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Turning the Power On and Off . . . . . . . . . . . . . . . . . . . 10
Inserting an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Necessary Settings before Use . . . . . . . . . . . . . . . . . . . 11
Setting Date and Time
Setting the Video Output
Viewing the firmware version of the unit
Formatting an SD Card
! Recording/Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Video Recording
Video Playback
# Recording/Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Still Image Recording
Still Image Playback
Deleting Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Viewing Files on TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Saving Files on a Computer . . . . . . . . . . . . . . . . . . . . . . 18
System Requirements (Windows) . . . . . . . . . . . . . . . . 19
Installing the Supplied Software . . . . . . . . . . . . . . . . . 20
Exporting to iTunes® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Uploading to YouTubeTM . . . . . . . . . . . . . . . . . . . . . . . . . 22
Warning Indications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Customer Support Information . . . . . . . . . . . . . . . . . . 26
4
Names of Components
LCD Monitor
Focus Switching Lever
Normal Recording [M]
Macro Recording [
]
Charge Lamp
Status (Warning) Lamp
Power Button [<]
Power Lamp
Recording Select Button
Video [!]
Still Image [#]
Select Button [%]
Recording/Playback
Index Button [7]
Delete Button [$]
Reset Hole
Hand Strap
Attachment Area
Recording Start/Stop Button
Shutter Button
Set Button
¡ , ¢ , £ , ¤ Buttons
Zoom Buttons
Volume Buttons
AV Connector
Lens
HDMI Connector
USB Connector
Microphone
Speaker
SD Slot Cover
Tripod Mounting
Socket
5
Accessories
USB Cable
(WUU102SCP001)
AV Cable
(WPU122SCP001)
Hand Strap
Attaching the Hand Strap
To guard against dropping the camcorder, we recommend attaching the
hand strap.
NOTE
• When carrying the camcorder, please be careful
not to drop it. Dropping it may cause injury or a
malfunction of your camcorder.
• When a child uses the camcorder, there must be
parental guidance.
Indications on LCD monitor
8 Index
! Videos / # Still Images
Mode Indicator Folder Number_File Number
Current Page/
Total Number of Pages
8 To delete/redisplay
characters and symbols
on the LCD monitor
Press the 7 button for more
than 2 seconds.
6
Indications on LCD monitor (Continued)
8 During Recording
! Video
Mode Indicator
REC
Remaining Time
00h59m
01:11
Video Quality
Counter
1080p
1080p/720p/VGA/
QVGA
Macro Recording
W
T
Battery Indicator
Display changes depending on
the remaining battery level
Zoom Bar
W: Wide side, T: Tele side
# Still image
Mode Indicator
Remaining Number of Shots
3095
Image Size
8M/5M/2M/VGA
M
8
Macro Recording
W
T
Zoom Bar
W: Wide side, T: Tele side
7
Indications on LCD monitor (Continued)
8 During Playback
! Video
Folder Number_File Number
Recording Time
Playback Time
(minutes : seconds)
_
01:48
00:20
103 0050
Video Quality
1080p/720p/VGA/
QVGA
1080p
Playback Mode
F : Playback
N : Reverse search
O : Forward search
Q : Pause
Volume Indicator
# Still image
Folder Number_File Number
_
103 0050
Image Size
8M/5M/2M/VGA
M
8
8
Charging
Charge the battery connecting to the computer with the USB cable.
Charge Lamp
< Button
Power Lamp
USB Connector
To Computer
USB Cable
Press the button to turn off the camcorder.
The power lamp goes out.
<
1
2
Connect the camcorder to a computer.
Camcorder’s LCD monitor will turn off when the USB cable is connected.
This occurs during battery charging or when connected to a PC.
turns on: Charging
Charge lamp
goes out: Charging finished
Charging time
approx. 180 minutes
When the charging is finished, disconnect the camcorder from the computer.
NOTE
• Charging is not possible while the camcorder is turned on.
• Make sure that the computer is turned on during charging.
• The camcorder is not charged when it is shipped. Charge the camcorder before using it for
the first time.
• If there is a trouble in charging, the charge lamp/warning lamp blinks in green. Connect the
camcorder to the computer again.
8 Battery Indicator
Fully charged
Medium
Very low
Recharge the battery at an early opportunity.
Empty
The camcorder will turn off. Recharge the battery immediately.
Blinking
9
Turning the Power On and Off
Press the button for more than 1 second.
The power lamp turns on.
<
1
2
To turn off the power, press the button again.
<
The power lamp goes off.
NOTE
• To conserve power, the camcorder turns off automatically if there is no operation for
3 minutes.
• If the only operation is turning on the power, the camcorder enters the video recording
ready status.
• When you first turn on the power after purchasing the camcorder, the [Time setup] screen
appears. Set the date and time before using the camcorder. (Z p. 11)
Inserting an SD Card
Operation-confirmed SD cards
Operations are confirmed on the following SD cards. Panasonic, TOSHIBA, SanDisk, ATP.
Video recording: Class 4 or higher compatible SDHC card (4 GB to 32 GB)
Still image recording: SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB)
* If other media are used, they may fail to record data correctly, or they may lose data that had
already been recorded.
Preparation: Turn off the camcorder.
Unlock the SD card slot and open the cover.
1
Insert an SD card.
2
Return the cover of the SD card slot and
lock it.
3
NOTE
• When the SD card is removed or inserted, the power turns off.
Turn off the power before inserting the card.
• When an SD card is inserted, the SD card is prioritized as the destination for data saving.
10
Necessary Settings before Use
Setting Date and Time
Preparation:
Turn on the power and select the recording mode.
While pressing the button, press the button.
$
7
1
2
Select [Time setup], and then press the
set button.
Set the date and time by selecting items
3
4
with
,
and setting values with , .
£ ¤
¡ ¢
After completing the setting, press the
set button.
8 To quit the screen
Select [Exit], and then press the set button.
NOTE
• [Hour] is displayed in 24 hour format only.
11
Necessary Settings before Use (Continued)
Setting the Video Output
Preparation:
Turn on the power and select the recording mode.
While pressing the button, press the button.
$
7
1
2
Press the
,
buttons to select [Video
¡ ¢
out], and then press the set button.
Press the
,
buttons to select [NTSC]
¡ ¢
3
or [PAL], and then press the set button.
8 To quit the screen
Select [Exit], and then press the set button.
NOTE
• Set the camcorder’s video output to the system that is appropriate for your TV.
NTSC: Japan, USA, South Korea, etc.
PAL: Europe, China, etc.
Viewing the firmware version of the unit
You can confirm the firmware version of the unit.
1) While pressing the $ button, press the
7 button.
2) Press the ¡ , ¢ buttons to select
[Firmware version], and then press the
set button.
8 To quit the screen
Select [Exit], and then press the set button.
12
Formatting an SD Card
Preparation:
• Insert an SD card.
• Turn on the power and select the recording mode.
While pressing the button, press the button.
$
7
1
2
Press the
,
buttons to select
¡ ¢
[Format], and then press the set button.
Press the , buttons to select [Yes],
and then press the set button.
£ ¤
3
8 To quit the screen
Select [Exit], and then press the set button.
NOTE
• Formatting erases all data (videos and still images) on the SD card.
13
! Recording/Playback
Video Recording
During recording, the screen display
changes to red
Press the button to turn on the
power.
<
1
The camcorder enters the video recording
ready status.
Press the set button.
The recording starts.
2
8 To stop recording
Press the set button again.
8 To change the quality
Press the £ button twice. Each time you press the £ button twice, you can change
the quality.
1080p(default) & 720p & VGA & QVGA
8 To zoom
Press the ¡ , ¢ buttons.
NOTE
• Zoom is performed digitally, therefore image quality degrades when zooming.
Video Playback
Press the button to select the playback mode.
%
1
2
Press the
video.
,
,
, buttons to select a
¡ꢀ¢ £ ¤
Press the set button to start playback.
Press it again to stop the playback.
3
8 To return to the index
8 To perform forward search or
reverse search
Press the 7 button.
Press and hold the £ , ¤ buttons
during playback. When the button is
released, normal playback resumes.
8 To change the volume
Press the ¡ , ¢ buttons during
playback.
14
# Recording/Playback
Still Image Recording
Press the button to turn on the power.
<
1
2
3
Press the
/
button to select
.
#
! #
Press the set button.
The recorded still image is saved.
8 To change the image size
Press the £ button twice. Each time you press the £ button twice, you can change
the image size.
8M (default) & 5M & 2M & VGA
8 To zoom
Press the ¡ꢀ, ¢ buttons.
NOTE
• Zoom is performed digitally, therefore image quality degrades when zooming.
Still Image Playback
Press the button to select the playback mode.
%
1
2
3
Press the
/
button to select
.
#
! #
Press the
still image.
,
,
, buttons to select a
¡ꢀ¢ £ ¤
Press the set button.
4
8 To return to the index
Press the 7 button.
15
Deleting Files
Preparation:
Select the playback mode.
Press the button.
7
1
Press the
,
,
, buttons to select a file.
¡ꢀ¢ £ ¤
2
3
4
Press the button.
$
Press the , buttons and press the set
£ ¤
button to select [Yes].
NOTE
• You can also delete by pressing the $ button while a video is playing back or a still image is
• Ydoisuplcaaynendo. t delete all the files at once.
16
Viewing Files on TV
Preparation:
• Turn on the TV.
• Turn on the camcorder and select the playback mode.
8 To connect using the AV connector
AV Connector
TV
< button
AV cable
8 To connect using the HDMI mini connector (optional)
HDMI Connector
TV
< button
HDMI Cable (optional)
(Mini to full-sized HDMI cable)
Connect the camcorder to a TV.
After being connected, the camcorder switches automatically to
monitor display.
1
Switch to the TV’s external input connector.
2
3
4
Press the button.
7
Start the playback.
Video ( p. 14)
Z
Still image ( p. 15)
Z
NOTE
• When an AV cable and an HDMI cable are connected, output to the HDMI cable is prioritized.
• Also refer to instruction manual of the TV.
• Set the camcorder’s video output to the playback system that is appropriate for your TV.
(Z p. 12)
• We recommend using the Category 2 HDMI cable (High Speed cable).
17
Saving Files on a Computer
Preparation:
• Turn on the computer.
• Turn on the camcorder.
You can save recorded videos and still images on a computer.
To Computer
USB
Connector
USB Cable
Connect the camcorder to a computer.
Camcorder’s LCD monitor will turn off when the USB cable is connected.
This occurs during battery charging or when connected to a PC.
1
8 Windows: Double-click [FMCAM_SD]/[FMCAM_INT] in [My
Computer].
2
3
8 Macintosh: Double-click [NO_NAME] on the desktop.
Copy the video or still image files from the“DCIM” folder.
[DCIM]
[100JVCSO]
[101JVCSO]
[102JVCSO]
PIC_XXXX.MOV
PIC_XXXX.MOV
PIC_XXXX.JPG
PIC_XXXX.JPG
[FMCAM_SD]
SD Card
Videos
Still Images
[FMCAM_INT]
Internal Memory
8 To disconnect the camcorder from a computer (Windows)
1) Click the
icon in the task tray on the computer screen.
2) The [Safely Remove Hardware] window appears.
3) Select [USB Mass Storage Device] and then click [Stop].
8 To disconnect the camcorder from a computer (Macintosh)
Move [NO_NAME] from the desktop to [Trash], and then disconnect the USB
cable.
18
System Requirements (Windows)
The system configuration described below is required in order to use this
software.
8 OS
Microsoft Windows XP Service Pack 3
- Home Edition/-Professional (pre-installed)
Microsoft Windows Vista Service Pack 2 (32 bit)
- Home Basic/-Home Premium (pre-installed)
8 CPU
Intel Core Duo 1.66 GHz or higher
(Intel Core 2 Duo 2.13 GHz or higher recommended)
8 Memory
8 Hard disk
8 Display
Windows XP: 1 GB or more
Windows Vista: 2 GB or more
250 MB or more disk space is required for software
installation.
1024 x 768 pixels, 16 bit (High-color) or more.
(1280 x 1024 pixels, 32 bit or more,
Intel G965 (onboard VGA) or higher recommended)
8 Others
Standard USB 2.0 port
19
Installing the Supplied Software
Preparation:
• Turn on the camcorder.
• Connect the camcorder to a computer.
* The screenshots in the steps below are for Windows XP.
[FMCAM_FRM] window appears.
1
Select [MediaBrowser LE Install and
User Guide] and click [OK].
2
Select [MediaBrowser LE].
3
In the [Choose Setup Language], select
a language and click [Next].
4
Follow the on-screen instructions.
Click [Finish].
An icon appears on the desktop.
5
NOTE
• For details about operations in MediaBrowser LE, see its Help.
20
Exporting to iTunes®
You can easily transfer videos recorded to iTunes® and play back them on
iPod®, using the supplied MediaBrowser LE software.
For details about iTunes® and iPod®, see the website.
Preparation:
• Install the supplied MediaBrowser LE software to the computer. (Z p. 20)
• After the software is installed, disconnect the camcorder from the
computer.
• If the software is already installed, turn on the camcorder.
Connect the camcorder to a computer.
MediaBrowser LE starts.
1
Edit the file using MediaBrowser LE if necessary.
2
3
Transfer files using the [Export] function of MediaBrowser LE.
NOTE
• For details about operations in MediaBrowser LE, see its Help.
21
Uploading to YouTubeTM
You can easily upload videos to YouTubeTM, the video sharing website, using
the supplied MediaBrowser LE software.
For details about YouTube™, see the website.
Preparation:
• Install the supplied MediaBrowser LE software to the computer. (Z p. 20)
• Turn on the camcorder.
Connect the camcorder to a computer.
MediaBrowser LE starts.
1
Click the [Device] icon of MediaBrowser LE.
2
: Internal memory
: SD card
Click the date containing video files,
then drag and drop the selected files to
3
[Show all] in the [Library].
The files are imported into MediaBrowser LE.
Disconnect the camcorder from the
computer.
4
Upload files to YouTubeTM using the
[YouTube] (uploading) function of
MediaBrowser LE.
5
NOTE
• When you operate video files using MediaBrowser LE, copy them to the computer from the
camcorder. If you operate the video files in the camcorder directly, they may be damaged
due to battery exhaustion.
• For details about operations in MediaBrowser LE, see its Help.
22
Warning Indications
Before requesting service, consult the following chart. If the solutions indicated in the chart do
not solve the problem, consult your nearest JVC dealer or JVC service center for instructions.
Refer also to the FAQ section on JVC’s website
The following phenomena are not malfunctions.
•LCD monitor momentarily become red or black when sunlight is recorded.
•Black spots, or red, green, or blue spots appear on the LCD monitor.
(The LCD monitor contains 99.99% effective pixels, but 0.01% or fewer pixels may be
ineffective.)
The camera is a microcomputer-controlled device. Electrostatic discharge, external noise and
interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a
case, reset the camera.
8 To Reset the Camcorder
If the camcorder malfunctions, push into the reset hole with a pointed object such as a
wire to initialize the camcorder. (Z p. 5)
Indication
Action
Z
Memory card is full
•
10, 16,
18
• DReepleltaecfielethseorSmDocvaerdthweimthtoa anecwomopnuet.er or other storage.
Internal memory is full
Memory card is protected
• Unlock the write-protect switch of the SD card.
–
Memory card is low speed
• Replace the SD card with specifications one that is
10
10, 13
–
compatible with high-speed transfer.
Memory card cannot be
used
• Format the SD card.
• Replace the SD card with a new one.
No Files
• Remove the SD card and check whether the data on the SD
card was recorded using this camcorder.
Invalid
This file is protected
• Deletion cannot be performed on the camcorder. Cancel the
–
9
protection on a computer and then delete the file.
Insufficient battery. Please
charge it.
• Recharge the battery.
• MTuarkneosuffreththeactaymoucuosreddetrhaencdortrhecetnptruocrnedounreaagnadintr.y again.
• If the actions above do not resolve the issue, replace the SD
card with a new one.
Format failed.
•
10
13
Recovery failed.
Delete failed.
• Move files to a computer, and then format the SD card.
10, 13,
18
• Replace the SD card with a new one.
• Make sure that you used the correct procedure and try
13, 16
• aIfgtahien.actions above do not resolve the issue, replace the SD
card with a new one.
The file number reaches a
maximum. Please delete
all files in the memory card
or the internal memory for
recording.
• Delete all files.
10, 16
• Replace the SD card with a new one.
23
Specifications
8 General
8 Video
Power consumption
Recording/Playback format
Video: MPEG-4 AVC/H.264
Audio: AAC
1.9 W
Dimensions (W × H × D)
53.0 mm × 97.0 mm × 17.0 mm
(2-1/8" × 3-7/8" × 11/16")
Weight
Signal format
Digital high definition format
1080/30p
Video quality
1080p (16 : 9) 1440 × 1080p
720p (16 : 9) 1280 × 720p
95 g (0.21 lbs)
100 g (0.23 lbs) (Including SD card)
Operating environment
Operating temperature:
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature:
–20 °C to 60 °C (–4 °F to 140 °F)
Operating humidity:
35 % to 85 %
VGA (4 : 3)
QVGA (4 : 3) 320 × 240p
640 × 480p
8 Still image
Recording format
JPEG
Image size (4 : 3)
8 Camera/LCD monitor
Pickup
8M
5M
2M
VGA
3264 × 2448
2592 × 1944
1600 × 1200
640 × 480
1/3.2" (8,170,000 pixels) progressive CMOS
Lens
F 2.8, f = 3.9 mm
8 Media
35 mm equivalent
Video: 1080p
720p
55 mm
42 mm
30 mm
Internal
Recordable capacity: approx. 34.5 MB
VGA
Commercially available SD cards
QVGA 30 mm
Still image: 30 mm
LCD monitor
2.0-inch LCD
Zoom
Digital ×4
8 Connectors
AV connector
ø 3.5 mm
Video output: 1.0 V (p-p), 75 W
Audio output: 300 mV (rms), 1 kW
USB connector
Mini USB type B
(USB 2.0 High Speed compliant)
HDMI connector
HDMI Mini Connector (V1.3)
Output: 1080i
24
8 Approximate recordable time (for video)
Recording
medium
SDHC Card
Internal
memory
Quality
4 GB
8 GB
16 GB
32 GB
1080p
24 s
24 s
41 m
41 m
1 h 24 m
1 h 24 m
4 h 14 m
21 h 17 m
2 h 47 m
2 h 47 m
8 h 23 m
42 h 8 m
5 h 42 m
5 h 42 m
17 h 07 m
85 h 57 m
720p
VGA
1 m 05 s
5 m 42 s
2 h 05 m
10 h 27 m
QVGA
h: hour/ m: minute/ s: second
• If you record 29 minutes continuously, it will stop recording automatically.
• When the battery life is too low even if it is in full charge, the battery comes to the end of its
life.
8 Approximate number of images (for still image)
Recording
medium
SD Card
2 GB
SDHC Card
Internal
memory
4 GB
8 GB
16 GB
32 GB
Quality
3264 × 2448
10
20
870
1710
2710
7010
9999
3480
5510
9999
9999
6900
9999
9999
9999
9999
9999
9999
9999
2592 × 1944
1600 × 1200
640 × 480
1370
3560
9999
60
360
• The recordable time and the number of still images are approximate and may differ
depending on the recording environment, the SD card, or the remaining battery power.
Design and specifications subject to change without notice.
25
Customer Support Information
Use of this software is authorized according to the terms of the software license.
JVC
When contacting the nearest JVC office or agency in your country (refer to the JVC Worldwide
software, please have the following information ready.
•Product Name, Model, Problem, Error Message
•PC (Manufacturer, Model (Desktop/Laptop), CPU, OS, Memory (MB/GB), Available Hard Disk
Space (GB))
Please note that it may take some time to respond to your questions, depending on their
subject matter.
JVC cannot answer questions regarding basic operation of your PC, or questions regarding
specifications or performance of the OS, other applications or drivers.
Pixela
Region
Language
Phone #
USA and Canada
English
+1-800-458-4029 (toll-free)
Europe (UK, Germany,
France, and Spain)
English/German/French/
Spanish
+800-1532-4865 (toll-free)
+44-1489-564-764
Other Countries in
Europe
English/German/French/
Spanish/Italian/Dutch
Asia (Philippines)
China
English
Chinese
+63-2-438-0090
10800-163-0014 (toll-free)
Please check our website for latest information and downloading.
26
© 2009 Victor Company of Japan, Limited
US/EU/AA 0809FOH-AL-OT1
|