Contents
Overview
Delay Transmission ........................................................ 9
Sending a Delayed Fax from the Document Feeder ..... 9
Sending a Delayed Fax from Memory........................... 9
Canceling a Delayed Transmission.............................. 10
Confirmation Report .................................................... 10
Copying.....................................................................11
Making Copies ............................................................. 11
Using Manual Paper Feeder ......................................... 11
Printing .....................................................................12
Using Manual Feed ...................................................... 12
Scanning ...................................................................13
Scanning the Document Using JetSuite Pro ................ 13
Using JetSuite Pro ...................................................14
Control Panel .............................................................3
Faxing .........................................................................4
Setting Up the Fax.......................................................... 4
Date and Time ................................................................ 4
Fax I.D. ........................................................................... 4
Loading the Document ................................................... 5
Using Manual Feed ........................................................ 5
Changing Resolution ...................................................... 5
Changing Contrast .......................................................... 5
Send to Single Location / Keypad Dialing .................... 6
Regular Dialing .............................................................. 6
One-Touch ...................................................................... 6
Auto (Speed) Dial........................................................... 6
Group Dial ...................................................................... 7
Broadcasting ................................................................... 7
Redialing ........................................................................ 8
Switching Between Memory & Feeder Transmit Modes
8
Search Key Dialing ........................................................ 8
Quick Reference
E-1
|
Control Panel
1) Numeric Keypad
2) One Touch Keypad
Quick Reference
E-3
|
Fax I.D.
Faxing
Overview
Setting Up the Fax
1 Press Select Function.
2 Press 9/User Program.
3 Press 4 on the numeric keypad.
4 Press ᮤYES.
5 Enter the full telephone number of your fax machine
Date and Time
1 Press Select Function.
using the numeric keypad.
6 Press Start.
2 Press 9/User Program.
3 Press 3 on the numeric keypad.
4 Press ᮤYES.
7 Enter your Sender ID (up to 32 digits). Use ᮣNO and
ᮤYES to move the cursor forward or backward.
8 Press Start.
5 Enter the new date and time using the numeric keypad.
Press ᮣNO to advance to the next number. Use the 24-
hour format.
9 Enter the telephone number for call back messages using
the numeric keypad. Enter up to 20 characters.
10 Press Start.
6 When the time is set, press ᮤYES.
11 Press Select Function to finish.
7 Press Select Function to finish.
E-4
OKIOFFICE 84
|
3 OKIOFFICE grips the documents and pulls the bottom
Loading the Document
1 Adjust document guides to the width of the document.
page into the machine.
Using Manual Feed
Using the markings on the manual feeder slot as a
positioning guide, insert a single sheet of paper or envelope
face up in the slot until you feel the OKIOFFICE 84 grab
hold of it.
Changing Resolution
Change resolution by pressing ᮤYES. The resolution
(photo, extra fine, fine, or standard) is marked by an LED
display just above the ᮤYES key.
2 Stack documents neatly and insert face down. Readjust
the document guides for a snug fit.
Changing Contrast
Change contrast by pressing ᮣNO. The contrast (light,
normal, or dark) is marked by an LED display just to the
right of the ᮣNO key.
Quick Reference
E-5
|
9 Press Start to finish programming the One Touch key.
Send to Single Location / Keypad
Dialing
10 To continue programming One Touch keys, go back to
step 3. When you are finished, press Select Function.
Regular Dialing
1 Load your documents.
How to Use
1 Load your documents.
2 On the numeric keypad, dial as you would on a normal
telephone.
2 Press the One Touch key.
3 Press Start to begin the transmission.
3 Press Start to begin the transmission.
One-Touch
Auto (Speed) Dial
How to Program
1 Press Select Function.
How to Program
1 Press Select Function.
2 Press 8/+/Location Program.
3 Press a One Touch key to program.
4 Enter the main fax number.
5 Press Start.
2 Press 8/+/Location Program.
3 Press Auto Dial.
4 Using the numeric keypad, enter a 2-digit number (01-70)
for the Auto Dial number you wish to program.
6 Enter the location ID (up to 15 characters).
7 Press Start.
5 Enter the fax number.
6 Press Start.
8 Enter the alternate fax number, if desired. Refer to steps 4
7 Enter the Location ID (up to 15 characters).
and 5.
E-6
OKIOFFICE 84
|
8 Press Start.
7 Continue to add locations to the group as needed.
9 To continue programming Auto Dial numbers, go back to
8 When you are finished programming your group, press
step 4. When you are finished, press Select Function.
ᮣNO.
9 To program another group, go back to step 3. If you are
finished, press Select Function.
How to Use
1 Load your documents.
How to Use
1 Load your documents.
2 Press Auto Dial, then enter the two-digit Auto Dial
number on the numeric keypad.
2 Press the Auto Dial key. The Display showsAUTO DIAL
3 Press Start to begin the transmission.
NO.
3 Press the # key. The display shows GROUP SETTING.
4 Enter the group number on the numeric keypad.
5 Press Start to begin the transmission.
Group Dial
How to Program
1 Press Select Function.
Broadcasting
2 Press 8/+/Location Program.
3 On the numeric keypad, press the # key.
1 Load your documents.
4 Using the numeric keypad, enter the group number (1-5)
2 Select a location: press a One Touch key, Auto Dial plus a
two-digit Auto Dial number, press # plus a group number,
or enter a number on the numeric keypad.
you want to program.
5 Add a location to your group: press a One Touch key,
Auto Dial plus a two-digit Auto Dial number, or use the
Search key to find the desired location.
3 Repeat step 2 as often as necessary to continue selecting
locations.
6 Press ᮤYES to add the location to the group.
4 Press Start to begin transmission.
Quick Reference
E-7
|
Search Key Dialing
Redialing
Use the Search key to look through the alphabetical list of
Location IDs programmed into your OKIOFFICE 84.
You can redial a number manually at any time by pressing
Redial.
1 Press Search to begin the search.
Switching Between Memory & Feeder
Transmit Modes
2 Press Search again to look through the entire list of
locations in alphabetical order, or
3 Locate the letter you want on the numeric keypad and
press that key to look through Location IDs beginning
with that letter.
Switching is enabled when Instant Dialing is turned off.
1 Press Select Function.
2 Press 9/User Prog.
3 Press ᮤYES.
4 Enter 17 using the numeric keypad.
5 Press ᮣNO to switch between memory and feeder
transmit modes.
6 Press Select Function to register your selection.
E-8
OKIOFFICE 84
|
Delay Transmission
Sending a Delayed Fax from Memory
1 Load your documents.
2 Press Select Function.
Sending a Delayed Fax from the Document
Feeder
1 Load your documents.
3 Press 1/Delayed TX.
4 If the transmission is to occur on the same day, skip to
step 6. Otherwise, press ᮣNO.
2 Press Select Function.
5 Using the numeric keypad, enter the transmission date—
3 Press 1/Delayed TX.
up to three days in advance.
4 If the transmission is to occur on the same day, skip to
6 Press ᮤYES.
step 6. Otherwise, press ᮣNO.
7 Using the numeric keypad, enter the transmission time, in
5 Using the numeric keypad, enter the transmission date—
24-hour format.
up to three days in advance.
8 Press ᮤYES.
6 Press ᮤYES.
9 Press ᮣNO to select faxing from memory.
7 Using the numeric keypad, enter the transmission time, in
24-hour format.
10 Select a location: press a One Touch key, Auto Dial plus
a two-digit Auto Dial number, press # plus a group
number, or enter a number on the numeric keypad.
8 Press ᮤYES.
9 Select a location: press a One Touch key, Auto Dial plus
a two-digit Auto Dial number, or enter a number on the
numeric keypad.
11 Press ᮤYES to confirm your selection.
12 Repeat steps 10 and 11 as necessary to continue selecting
locations.
10 Press ᮤYES or Start. Your OKIOFFICE 84 begins
waiting for the date and time you have set before feeding
the document and sending the fax.
13 When you are finished selecting locations, press ᮣNO.
Quick Reference
E-9
|
14 If you have selected multiple locations, your OKIOFFICE
84 asks if you want to confirm your selections with a
printed report before proceeding. If you do, press ᮤYES.
Canceling a Delayed Transmission
1 Press Stop.
2 Press ᮤYES. The display shows the Location ID of the
delayed transmission currently loaded in your
OKIOFFICE 84.
After the report is printed and if you want to make
corrections, press ᮣNO and go back to step 10.
3 Press ᮤYES.
4 If the delayed transmission was a feeder transmission,
press Stop again to remove the document from the
document feeder.
To remove a location, select the location in the same way,
but press ᮣNO to delete it from your transmission.
15 When all of your selections are correct, press Start. Your
OKIOFFICE 84 scans the documents into memory and
waits until the set date and time before sending the fax.
When scanning is completed, your OKIOFFICE 84 is
available for other transmission operations.
Confirmation Report
1 After transmission, press Copy (with no documents
loaded) to see the confirmation report on the display.
2 Press Copy again to print the report.
E-10 OKIOFFICE 84
|
Using Manual Paper Feeder
Copying
Overview
Making Copies
1 Load the document in the document tray.
2 Press Copy.
3 If only one copy is required, wait and the machine will
begin copying momentarily.
1 Load your documents.
2 Insert a sheet of paper face up into the manual paper
feeder slot, until you feel the OKIOFFICE 84 grab hold
of the paper.
To make multiple copies, enter the number of copies
required using the numeric keypad.
3 Press Copy (see the instructions above).
4 Press Copy again to start copying.
Quick Reference
E-11
|
Printing
Overview
See your software user’s guide for more details.
1 Select File, Print.
1 Using the markings on the manual feeder slot as a
positioning guide, insert a single sheet of paper or
envelope face up in the slot until you feel the
OKIOFFICE 84 grab hold of it.
2 Select OKIOFFICE 84.
3 Click OK.
2 Issue the command to print through your application. The
paper pulls into the OKIOFFICE 84 for printing.
3 If you are printing multiple pages, insert additional pages
Using Manual Feed
when prompted by the software.
E-12 OKIOFFICE 84
|
Scanning
Overview
Scanning the Document Using
JetSuite Pro
1 Insert the pages to be scanned into the document feeder
print side down, with the top edge into the OKIOFFICE
84.
2 A dialog box appears, saying, “A Document has been
placed into the input tray. Would you like to scan it?”
3 Click Yes.
4 A dialog box lets you control resolution, regular or
inverted image, dimensions of scanned document, level of
contrast, and dithering (“16 shades” for pictures with
grays, “none” for black and white images or text).
5 Click Scan. When scanning is complete, the document
appears on the desktop.
Quick Reference
E-13
|
Using JetSuite Pro
Overview
See your JetSuite Software User’s Guide for more details.
1) Select folder.
2) Select file.
3) Select operation.
E-14 OKIOFFICE 84
|
|