OWNER'S MANUAL
OWNER’S MANUAL
DISHWASHER
WASHING MACHINE
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the dishwasher is installed
Please read this manual carefully before operating
correctly and safely. Leave these instructions near the dishwasher
your set and retain it for future reference.
after installation for future reference.
WM0642H*
D1450**
MFL68741439
P/NO : MFL31245123
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION
BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, injury to persons, or death.
Your Safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER,
WARNING or CAUTION.
These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product,if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance
of injury, and tell you what can happen if the instructions are not followed.
3
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before use
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using the dishwasher,
follow basic precautions, including the following:
• Please read this manual carefully
before using the dishwasher for the
first time.
• This appliance is intended to be used in
household and similar applications such
as;
• This manual contains very important notes
regarding the installation, use and
maintenance of your dishwasher.
- Staff kitchen areas in shops, offices and
other working environments;
- Farm houses;
• The manufacturer can not be responsible
for problems caused by ignoring these
safety and caution instructions.
- By clients in hotels, motels and other
residential type environments;
- Bed and breakfast type environments.
• This dishwasher is designed for normal
household use.
• If this product is used for commercial
purpose, it is not warranted.
• Do not use the dishwasher for
industrial and commercial use, or other
purpose.
(Example: Public places such as
restaurant, lodging house, training center,
dormitory)
• The appliance is not intended for use
by young children or infirm persons
without supervision.
If the product is installed outside the
normal service area, any cost of
transportation involved in the repair of the
product, or the replacement of a defective
part, shall be borne by the owner.
• Check packaging and dishwasher
immediately for signs of transport
damage. If the appliance is damaged,
do not put it into use but contact your
supplier without delay.
During installation
• Electrical connection must be in
accordance with the rating label.
• If power supply cord is damaged, it must
only be replaced by the manufacturer or
its service agent or a similar qualified
person in order to avoid a hazard.
• Electrical safety is only guaranteed when
the earth system of your house is in
accordance with the related local
regulations. (Do not use an extension
cable or cord.)
• This appliance must be positioned so that
the plug is accessible.
• The appliance is to be connected to the
water mains using new hose-sets and that
old hose-sets should not be reused.
• If the hot water exceeds 65ºC, adjust the
water heater setting. If the hot water
temperature can not be maintained below
65ºC, the dishwasher must be connected
to cold water.
During use
• Only suitable household utensils
should be placed in the dishwasher.
(Please avoid utensils; that are non-
heat-resistant, metal decorated, etc.)
4
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before use
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using the dishwasher,
follow basic precautions, including the following:
• Do not use any kinds of solvent in your
dishwasher. They may cause an
explosion or fire.
• This appliance is fitted with a safety
function that automatically stops the
operation of the dishwasher when it is
exposed to heavy disturbance on its
mains.
• Do not spray water on the appliance.
It may cause the failure of electric parts
or electric shock.
• Dishwasher detergents are strongly
alkaline.They can be extremely dangerous
if swallowed.
Avoid contact with skin and eyes and
keep children away from the
• Do not push down or sit on the inner
door when the door is opened. It may
cause the deformation or failure of your
dishwasher.
dishwasher when the door is open.
Check that the detergent receptacle is
empty after completion of the wash cycle.
• Do not use the detergent for hand
washing.
The detergent for dishwasher should
be used for normal operation.
Child Safety
• Controls may be locked using Child Lock
mode to prevent all the settings from being
changed by a child.
• Do not allow children to operate the
dishwasher.
• Young children should be supervised
to ensure that they do not play with the
appliance.
• Keep children away from detergents
and rinse-aids.
All batteries (whether installed or attached) should not be exposed to excess heat like
sunlight or similar source.
Save these instructions
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current.
This appliance is equipped with a cord having an equipment-grounding conductor and
grounding plug. The plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinance.
• Do not use an adapter this will defeat the grounding plug.
• If you don’t have the proper outlet, consult an electrician.
5
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Improper connection of the equipment-grounding conductor can result in electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance
is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the
outlet, have a proper outlet installed by a qualified electrician.
CAUTION
CAUTION concerning the Power cord
• Most appliances recommend they be placed upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's manual to be certain.
• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in an electric shock or fire.
• Periodically examine the cord of your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized servicer.
• Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the appliance.
If the appliance is supplied from a cord extension set or an electrical portable outlet device,
the cord extension set on electrical portable outlet device must be positioned so that it is
not subject to splashing or ingress of moisture.
CAUTION
The instructions shall state the substance of the following :
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
6
INSTALLATION INSTRUCTIONS
WARNING
A qualified electrician/plumber or competent person should carry out any electrical/
plumbing work required to install this appliance.
•
Prepare cupboard opening
Preparation for electrical wiring
1. This dishwasher is designed to fit the size
shown as below.
CAUTION
For personal safety, remove house
fuse or open circuit breaker before
installation.
Do not use an extension cord or
adapter plug with this appliance.
Electrical and earthing connections must
comply with the national electrical code/
provincial and municipal code and/or
other local codes.
•
•
2. Select a location as close to sink as possible
for ease of connection to the water and drain
pipes.
3. To ensure good drainage, the dishwasher
should not be installed more than 3 meters
away from the sink.
4. If dishwasher is installed in a corner, a
minimum of 5cm of space is required
between the washer and an adjacent cabinet
or wall.
1. This appliance must be supplied with
correct rating voltage and hertz as shown on
instruction manual, and connected to an
individual, properly earthed branch circuit,
protected by a minimum 15 amp circuit
breaker or time delay fuse.
Wiring must be 2 wires with Earth.
2. The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher side.(See page 9 Fig.A)
3. The power plug must be correctly earthed, if
in doubt, have it checked by a qualified
Electrician. No other appliance should be
connected to the same plug outlet by a
double adapter or similar plug.
Unit:mm
Dangerous voltage
To indicate hazards arising
from dangerous voltages.
CAUTION
Any bare wood surrounding the
dishwasher should be sealed with a
waterproof paint or sealant to prevent
swelling.
•
Note- in case of an application
warning sign, the rules
according to ISO 3864 should
be adhered to.
7
INSTALLATION INSTRUCTIONS
Preparing the dishwasher for
installation
Installing the dishwasher in
cupboard
1. Lay the dishwasher on its back.
1. Before sliding the dishwasher into the
cupboard opening, all necessary height
and balancing adjustments should be
made using a spanner.
2. Adjust the legs to the required height
as shown in below figure.
2. Slide the dishwasher into the cabinet,
opening carefully. Make sure that the
drain hose inside the cabinet is not kinked
or stretched.
Adjust
leg
CAUTION
If the height of the cupboard is below
850mm, you should remove the top table
by unscrewing the 2 screws.
(Two from rear)
•
8
INSTALLATION INSTRUCTIONS
Installation of drain hose
1. If the end of drain hose does not fit to the
drain line, use a rubber connector(not
supplied) that is resistant to heat and
detergent.
When the drain hose is connected to a
separate standpipe, it is essential that an
airtight connection be made.
Refer to Fig.B
2. This should be available from a plumbing
shop or DIY merchants.
3. There are two typical connections as shown
in Figure A, B.
The S trap spigot must be drilled out cleanly
and free of obstruction to its maximum
internal diameter, if used for drainage.
To prevent siphoning, one of the following
methods must be used:
Fig. B : Drainage connection - stand pipe.
When the drain hose is connected to a sink
S trap or waste disposal unit, the hose must
be looped up to the underside of the bench
top and secured.
Drain hose Extension
Extend drain hose as shown below.
Fig. A
CAUTION
When you connect or extend drain hose,
make sure that drain hose is not
kinked.
•
(Bends should have a 40 mm radius.)
9
INSTALLATION INSTRUCTIONS
Installation of water inlet hose
How to level the dishwasher
After installing the dishwasher, you may notice a
slight sticking of the door to the dishwasher,
when you open or close the door. If this does
happen you need to adjust the level of the
dishwasher.
Connect the water supply hose to the water tap.
(Fig. A)
Some models consist of an inlet valve and hose.
(Fig. B)
After connecting the inlet hose to the tap, turn on
the tap to flush out foreign substances (dirt, sand
or sawdust) in the water lines. Let water drain
into a bucket, and check the water temperature.
Connect the supply hose to the water inlet valve.
Case 1. In case the door is slanted to the right
Water tap
Fig. C
Water supply
hose
• If the door slants to the right, see fig. C and
follow these instructions:
Fig. A
Fig. B
1) Unscrew(counter-clockwise) the left leg of
the back side and correct the level.
2) Check the opening of door and repeat if
necessary until the door opens and closes
properly.
• This dishwasher may be fed with either hot or
cold water. If the water can not be maintained
below 65ºC, the dishwasher must be connected
to cold water.
• When connecting, you may use sealant tape or
sealing compound to avoid water leaks.
• Make sure that the line is not kinked or sharply
bent.
• When the product is correctly leveled, there
should be no slant, stickiness or friction sound.
• It is recommended that the new inlet hose be
used and not the existing or old hose.
Case 2. In case the door is slanted to the left
Final check and assembling
1. Securely hand tighten supply hose to the
water supply.
Plug the power supply cord into an earthed
electrical point and switch on.
Fig. D
2. After installing and prior to using the
dishwasher with crockery, we recommend that
you use the dishwasher on Quick mode to
rinse through. At this stage it is useful to
ensure that there are no operating problems or
water leaks.
When the dishwasher is used for the first time,
there may be a loud noise, if this happens,
turn off the power and restart the dishwasher.
• If the door slants to the left, see fig. D and
follow these instructions:
1) Check the opening of door if there still
remains sticky or friction sound.
2) Check the opening of door and repeat if
necessary until the door opens and closes
properly.
• When the product is correctly leveled, there
should be no slant, stickiness or friction sound.
10
PARTS NAME
1. Control Panel
2. Door Handle
3. Front Cover
4. Lower Cover
5. Display Window
6. Power Button
7. Drain Hose
11. Upper Rack
12. Cutlery Basket
13. Detergent And Rinse Aid Dispenser
14. Vapor Vent Cover
15. Upper Spray Arm
16. Lower Spray Arm
17. Filter ASM
8. Inlet Hose
18. Lower Rack
9. Power Cord
10. Adjustable Leg
19. Salt Container Cap
Accessory
Funnel
※ The appearance and specifications may vary without notice.
11
FUNCTION OF CONTROL BUTTON
①
②
Salt & Rinse Refill Indicator
• Salt : Refill with special salt when the lamp turns on.
• Rinse : Refill with rinse aid when the lamp turns on.
Half Load
• In case of small load, use upper or lower rack only to save energy.
• ꢀWith each press, can select Upper or Lower rack only.
• ꢀIn case you don’t select this button, the machine always works vario washing, which operate upper and lower spray
arm alternately.
③
④
Extra Hot & Child Lock Indicator
• Lamp will turn on when the Extra Hot setting is on.
• Lamp will turn on when the Child Lock setting is on.
Time Left
• Before starting, the display window shows the running time of the selected program.
• ꢀAfter starting, the display window shows the remaining time.
• If the dishwasher has a trouble, the trouble type is displayed. (OE, IE, AE, FE, HE, tE, LE, nE)
• ꢀIf these error letters are displayed, please refer to the trouble shooting guide page 28 and follow the guide.
⑤
Delay Start
• If you want to delay the start of selected program, press this button.
• ꢀPressing this button will increase time by 1 hour.
• ꢀThe delay start time can be adjusted from 1 hour to 19 hours.
12
②
③
④
⑤
⑧
①
⑦
⑨
⑩
⑥
SMARTDIAGNOSIS™ function is available only for
the products with a SMARTDIAGNOSIS™ mark.
(Refer to Page 30.)
⑥
⑦
Program
• ꢀPress the cycle that corresponds to your desired wash cycle.
Extra Hot
• If you select the Extra Hot function, the operating temperature will be up to 80ºC.
(Dual Spray, Auto, Eco, Care)
⑧
⑨
Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the Delay Start and Care buttons simultaneously for a few
seconds.
• On/OFF(FF) is displayed.
Child Lock
• Used to lock or unlock the control buttons to prevent all the setting from being changed by a child.
• To activate or release the Child Lock function, press the Care and Quick buttons simultaneously for a few
seconds while the dishwasher is in operation.
• ꢀAll controls will be disabled except the Child Lock and Power buttons.
• Turning off the dishwasher will not reset the Child Lock function. You must release the Child Lock before you
can operate the dishwasher.
⑩
Power
• For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
• In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
13
BEFORE USING FOR THE FIRST TIME
Hardness setting
※ You have to check your water hardness and set the softening system level before
operating your dishwasher.
Step 1. Check and find water hardness level
■
Method 1
1) Check the water hardness in your area.
(Your water utility company can help you with this.)
2) Set the softening system level of your dishwasher
according to the water hardness level.
Refer to Step 2.
■
Method 2
1) Check your water hardness by using test strip. (
2) Test Procedure
)
① Immerse all reaction zones of the test strip for approx.1sec (not in running water!).
② Shake off excess liquid from the strip and wait for 1min.
③ Check the water hardness color from the strip. (refer to the wrapper)
< Water hardness level >
Hardness range
Softening
system
level
The value
of
hardness
Water
quality
mmol/l
mg/l
Ca
°d
°e
°f
(Ca+Mg)
1 °e = 14.25 mg/l CaCO
<4
<5
<7
<0.7
<29
H0
°
0
1
f = 10 mg/l CaCO
soft
4 - 7
5 - 9
7 - 13
0.7 - 1.3 29 - 50
H1, H2
H3, H4
H5, H6
H7
75
°
°
1 d = 10 mg/l CaO (=1,78 f) (=1,25 °e)
7 - 14 9 - 17.5 13 - 25 1.3 - 2.5 50 - 100
14 - 21 17.5 - 26 25 - 38 2.5 - 3.8 100 - 150
125
250
375
very hard
>21
>26
>38
>3.8
>150
3) Set the softening system level of your dishwasher according to the water hardness level.
Refer to Step 2.
Step 2. Setting up the softening system level of your dishwasher
Adjust the water softener to the setting corresponding to the water hardness level in your area.
The water softener has 8 adjustment levels.
The dishwasher is programmed at the factory for a water hardness level of
This can be checked and altered by using the buttons on the control panel.
.
1. First, ensure the dishwasher is switched off.
2. Press Half Load and Power button simultaneously and keep them pressed.
3. To change the setting:
Simply press the Half Load button, then the figure will change one by one.
The display will change between
and
.
4. Once the hardness setting is correctly adjusted, press the Delay Start button.
The hardness setting is then saved.
14
BEFORE USING FOR THE FIRST TIME
Step 3. Salt Filling
This model has a water softener to soften hard water.
Please read these notes carefully for correct operation.
In order to provide satisfactory rinsing results, the dishwasher requires soft water, i.e., containing
little or no lime, otherwise water stains will be left behind on the dishes and interior containers.
If the tap water exceeds a certain level of hardness, it must be softened, I.e.,decalcified.
This is achieved by adding a special salt to the water softener inside the dishwasher.
The required amount of salt is set up according to how hard your tap water is.
■ꢀFꢀ illing with Salt
Fill the regenerating salt container before starting the washing programme.
Once you have filled with salt you must run the Quick course immediately to remove salt and salt
water around the tub in order to prevent corrosion.
• Remove lower rack and unscrew the cap of salt container.
• Before using your dishwasher for the first time, it is necessary
to Pour 1.5kg of salt and 1 litre of water in to the container.
Otherwise salt refill lamp always turn on during operation.
Use a funnel for ease and clean filling, ensuring that coarse salt
or regenerating salt intended for dishwashers is used.
• After filling, wipe off any spilled salt to seal the cap properly.
• Screw the cap tightly to prevent any suds from penetrating into
the container.
Step 4. Adding Rinse Aid
■ꢀFꢀ or filling
To fill the Rinse Aid chamber, push the rinse aid button. Fill the container to the maximum level
with a good quality Rinse Aid, then close the cap.
The Rinse Aid is automatically dispensed during the final rinse cycle.
The dosage is factory set to suit most installations. If, after washing, you notice cloudy spots,
streaks or water marks on your glassware, it may be necessary to increase the setting. To do this,
remove the cap and rotate the indicator arrow to a higher setting then replace the cap . If the glass
is smeared or foam is present on the bottom of the glass or the bottom of the machine, select a
lower setting.
15
INFORMATION FOR ENERGY TEST(EN50242)
■ꢀꢀAppliance loaded in accordance with
2. Upper Rack
standard specifications.
• Capacity : 14 place settings
• Standard course : Eco
• Rinse Aid setting : 5
• Reference cleaner : 35g of detergent onto the
inside surface of the door.
• Height-adjustable Rack-U must be inserted
into the uppermost position.
• It is the most efficient programme in terms
of its combined energy and water
consumption for that type of tableware.
Time in
minutes
Water in
Liter
Energy in
KWh
Programme
Eco
225
10
0.92
Milk
Tea
Oat
Meat
c
f
a
b
e
Egg
Spinach
d
g
Margarine
1. Cutlery Basket
3. Lower Rack
Milk
Tea
Oat
Meat
Egg
Spinach
Margarine
16
HOW TO USE AND OPERATE
Daily use load
2. Upper Rack
1. Cutlery Basket
3. Lower Rack
CAUTION
Do not use the pot and pan with plastic handle.
Poor washing for smudges of waterproof or long lasting lipsticks on the glass.
•
•
17
HOW TO USE AND OPERATE
For better washing performance, always load
the dishwasher according to the instructions.
1. Cutlery Basket
Place forks and spoons in the cutlery basket
with their handles downwards.
■ Before loading items into the dishwasher.
• Clean off large particles of food, in
particular insoluble items such as bones,
pips etc.
• Items with burnt on food should be soaked
prior to loading in the dishwasher.
■ While you load items into the dishwasher.
• Load all items with the opening down.
(Make sure that water does not collect in a
deep base.)
• Deep based items should be placed at an
angle to help water run off and dry
properly.
For Large utensils, such as whisks, the cover
can be opened by being unhinged.
Take care not to obstruct the rotation of the
spray arm.
• Make sure that all items do not touch each
other.
■ Take care not to obstruct the rotation of
spray arms.
■ Plastic items do not dry as well as steel or
porcelain items.
NOTE
Non Dishwasher Safe Items
The cutlery shouldn’t
be longer than 18cm.
The combination of high water
The basket can be split along its length,
increasing the lower rack’s loading versatility.
temperatures and dishwasher detergent
may damage particular items, therefore
we do not recommend using the
dishwasher to wash the following:
①
Copper or anodised aluminium
Hand painted silver or gold leaf crockery
Wood or bone handled utensils
Iron or non rust proof utensils
Plastic items which are not dishwasher
safe
②
②
Expensive one such as silvers and
dishes with golden rings
Fragile item such as crystal glasses
①
Slide two baskets in opposite directions, then
pull them apart.
WARNING
To prevent injuries, place knives and
other utensils with sharp points on the
cutlery rack.
•
•
If you want to load them in the cutlery
basket, place them with the pointed edges
facing downwards.
18
HOW TO USE AND OPERATE
2. Lower Rack
The lower rack is suitable for dinner plates,
soup bowls, dishes, pots, pans, lids and even
the grill tray.
3. Upper Rack
The upper rack is suitable for delicate items
such as, small plates, long cutlery, cups,
glasses and dishwasher safe plastic items.
Plates should be positioned upwards with the
plate bottom facing the front of the rack.
Cups, glasses and bowls must be positioned
upside down.
Plates should be positioned upright and facing
the centre of the rack and pots, pans and large
dishes must be turned upside down.
Take care not to obstruct the rotation of the
spray arms.
Take care not to obstruct the rotation of the
spray arm under the upper rack.
How to fold down
The knife rack provides support for long stem
glasses.
Fold up state
Ex) Loading large pot
The cup racks can
be folded up out of
the way for tall
crockery items.
Fold down state
19
HOW TO USE AND OPERATE
Adjusting the height of the upper rack
Your upper rack can be raised or lowered to
cater for different size of crockery. Before
adjusting, ensure rack is empty of all crockery
and side the rack out.
There is a 45mm gain in height when the upper
rack is moved to the lower position.
Reinsert the rack in the chosen position.
Fitting the rack back into the standard position
reduces the space between the upper and lower
rack.
45mm
After adjusting the rack levels, check that the
spray arms are free to rotate.
After adjusting the rack levels, check
that the spray arm is free to rotate.
WARNING
Before adjusting, ensure the rack is
empty of all crockery. Otherwise
crockery may get damaged or you may get
injured.
•
With the lower position of the upper rack,
check if the bottom part of upper rack
including spray arm is not disturbing items
on the lower rack.
When the upper rack is in the lower
position, push in the upper rack first, and
the lower rack later.
•
(Pull out the lower rack first, and the upper
rack later.)
20
HOW TO USE AND OPERATE
4. Adding Detergent
• Detergent must be put into the detergent
chamber before starting every programme.
Push button to open
• Please follow the manufacturer’s instructions
within the manual, when determining the
correct amount of detergent to use.
• If your dishes are moderately dirty, you may
use slightly less detergent than recommended.
• Chambers hold up to 50g including pre-wash
chamber.
• The amount of detergent required depends on
the programme. Please refer to the guide table.
AMOUNT OF DETERGENT
PROGRAMME
Pre-wash
(Onto the door)
Main-wash
(Dispenser)
Dual Spray
Auto
5g
30g
25g
35g
20g
10g
Place proper detergent into this compartment
10g
Eco
-
-
-
Care
Quick
• The detergent is dispensed automatically
during the operation.
• The chamber lid remains open after
operation.
When using tablets, place them onto the
inside surface of the door. The use of
some combined detergent/rinse aid
tablets can cause the dispenser to
remain shut during the wash.
NOTE
Detergent Information
Use only the detergent intended for
household dishwashers. (Ordinary
hand-washing detergent should not be
used, because the foam will interfere
with proper operation.)
•
When using some dishwasher tablets,
the dispenser may not open due to their
excessive size.
If this happens, place the tablet onto
the floor of the tub.
•
•
21
HOW TO USE AND OPERATE
5. Refilling
WARNING
The detergent used is a special
Dishwasher detergent and like all
household chemicals it should be treated
as harmful and kept out of reach of
children.
•
■
For refilling Rinse Aid
Depending on the dosage setting and the
number of washes, the chamber may need to be
topped up, approximately once a month. The
rinse aid level can be checked by two methods.
After completion of the wash
programme, the detergent
•
• By the indicator window on the dispenser
compartment should be checked and
any remaining detergent removed.
when the dishwasher door is fully open.
●
○
Black indicates sufficient Rinse Aid
Clear indicates Rinse Aid required
CAUTION
Using combined detergent products
(ex.3 in 1)
Rinse-Aid Indicator
Adjust Lever (Rinse)
Some products integrated with rinse aid
work best with specific programmes only.
You will obtain optimum rinsing and drying
results by using conventional rinse aids.
•
• By the light on the control panel, being lit,
when the dishwasher is working on.
The use of Dishwasher Tablet products
may also cause the soap dispenser to
remain shut, therefore failing to dispense
the soap tablet.
These combined detergent products can
alternatively be placed in the filter prior to
starting the wash cycle.
•
When the lamp is lit, it means the rinse
aid is almost empty. Refill the Rinse Aid
chamber as soon as possible.
Please contact the detergent manufacturer
if the drying performance is very poor or
you find white foam, when you use the
combined detergent products.
The rinse aid dial should be set to
minimum when using wash tablets with
built in rinse aid.
Excessive rinse aid can cause foaming at
the end of the wash.
We do not warrant the complaints that are
directly related to the use of these
products. Do not use liquid rinse aid if
using tablets containing a rinse aid agent.
NOTE
Rinse Aid Information
Rinse Aid is necessary to remove spots
and streaks of the water from dishes as
well as improved drying. Using the correct
amount will improve wash performance.
However, using too much can produce
excess foam leading to possible water
leaks.
•
22
HOW TO USE AND OPERATE
6. Drying
■ꢀꢀTo assist drying, we recommend that the
door be partially opened after the cycle.
The display will indicate Cd(cool dry) for a
further 60 minutes after the end of the cycle
time. It can be interrupted or terminated by
simply opening the door.
■ For refilling Salt
When the salt container is empty, the salt refill
lamp will automatically turn on during
operation. The salt should be refilled after the
cycle has finished. We recommend the salt refill
should always be carried out, as mentioned on
previous page, prior to starting the next
operation. This will immediately thin and drain
away any excess salt solution.
■ꢀꢀThe use of rinse aid is recommended for
optimum drying results.
■ꢀꢀSelect the Extra Hot option to get better
drying results.
When the lamp is lit, this means that the
salt aid is almost empty. Refill the Salt
Aid chamber as soon as possible.
NOTE
• After filling with salt, it may take a little
while before the indicator light turns off.
• When the control is set to , it is not
necessary to fill up with salt as no salt is
consumed while the dishwasher is
operating. If the control is set between
and , then salt must be added to the
salt container.
WARNING
• Do not pour detergent into the salt
container. This will destroy the water
softener.
23
OPERATING SEQUENCE
After starting, the display window shows
the remaining time.
1. Press the Power button
The time in the display window will start to
decrease minute by minute.
2. Check there is rinse aid and
salt
If the door is opened during the programme
a safety device ensures that the machine
stops.
Once the door is re-closed the programme
will start from where it was interrupted.
The corresponding indicator lights will
illuminate if refilling is required.
3. Open the door and check the
filters
8. At the end of the washing
programme
Ensure they are clean and properly
positioned. (See User Maintenance
Instructions)
End is displayed on the digital display and a
buzzer sounds.
And the dishwasher automatically switches
off for safety and energy saving later.
4. Load the dishes
Remove any excess food.
Pull the lower rack out and arrange the dishes
and cutlery.
Pull the upper rack out and arrange the cups,
glasses, etc.
If you select UV function, the dishwasher
automatically switches off after sterilising
action.
WARNING
CAUTION
Empty the lower rack first and then the
upper one; this will avoid water dripping
from the upper rack onto the dishes below.
Do not load the items in upper rack when
the lower rack is pulled out and loaded.
Failure to follow this warning, could result in
injury due to the falling dishwasher.
•
5. Ensure the spray arms can
freely rotate
WARNING
In general it is not advisable to open the
door while the machine is working.
If the door is opened, a safety device
ensures that the machine stops.
Care must be taken if the door is opened
during the hot phase or immediately after a
programme has finished, as steam may
escape.
•
•
•
6. Measure out detergent
Add the required amount of detergent into the
dispenser and close the lid.
7. Setting and starting the
programme
Press the programme button to select the
desired programme.
After 10 seconds, the machine will start.
If necessary, select the option function
corresponding to the desired programme.
The indicator lights of the programme and all
the phases of the programme will come on.
Before starting, the display window shows
the running time of the selected programme.
CAUTION
The door should not be left in the open
position since this could present a tripping
hazard.
•
24
PROGRAMME
▶ꢀRunning time may vary according to the water temperature, water pressure and voltage.
▶ꢀRunning time doesn’t include Cool Dry - 60min.
WASH
RINSE
COOL
DRY
Programme
DRY
Heating
Rinse
Pre Wash
45℃
Main Wash
Rinse 1
Rinse 2
60℃
70℃
Dual Spray
Auto
The programme sequence is optimised and adapted in accordance with how dirty the dishes are
.
45℃
50℃
60℃
51℃
70℃
65℃
Eco
Care
Quick
Dual Spray
Eco
This cycle washes the upper and lower racks at
different spray intensities. The lower rack is
washed with a strong spray for hard to clean
items, while the upper rack is washed with a
medium spray for more delicate items. This
provides optimum cleaning performance for
mixed loads, including fine china and stemware.
This programme offers efficient energy and
water consumption for a good washing
performance on a normally soiled tableware.
Care
Auto
The cycle is adequate for effectively cleaning
delicate items like fine china or stemware.
During the Auto programme, the degree of
soiling in the dishes is determined by the amount
of clouding to the water.
According to the degree of soiling, the
programme automatically adjusts the washing
time and temperature.
Quick
As a result, the energy and water consumption is
kept as low as possible. The F on display means
that the sensor is sensing the status of the
dishwasher.
Can use for lightly soiled recently used dishes
and cutlery.
■ Auto Restart
If the dishwasher is turned off by a power failure, it will restart from the position it stopped at adjusting
accordingly when you press the Power button again.
25
USER MAINTENANCE INSTRUCTIONS
To prevent trouble and poor operating, it is important to check filters and spray arms
at regular intervals.
Keeping the dishwasher
Upper Spray Arm
• If you are not using the dishwasher for a long
time, run a Care cycle without detergent. When
the cycle is finished, clean the dishwasher
according to the USER MAINTENANCE
INSTRUCTIONS to remove the food debris at
the bottom of the dishwasher and close the door.
• Pull the upper rack forwards.
• Check that the water jet holes are not blocked.
• If cleaning is required, remove the arm by
unscrewing the nut.
• Clean the spray arm and replace it in the
reverse order.
Filters
• Remove the lower rack first.
• Turn the mesh filter counterclockwise.
• Take out the mesh filter, upper STS filter and
outer filter.
• We recommend to clean them and run the Care
cycle without detergent at least once a week.
• Replace them in the reverse order.
Water Inlet
Mesh filter
• A filter is incorporated in the connection of
the valve on the water inlet hose.
If insufficient water flows into the dishwasher,
check that the filter is not blocked.
• Cleaning the filter
- Disconnect the dishwasher
from the mains supply.
Outer filter
Upper STS
filter
Switch off at the mains
socket and remove the plug.
- Turn off the tap.
- Unscrew the inlet hose.
- Remove the filter from
connection.
- Clean the filter in the supply
hose under running water.
NOTE
After each cycle, clean the filter for a better
washing result.
Before starting, check that the filter is
assembled well. If the filter is not assembled
correctly, you might have a poor cleaning
result.
•
•
- Refit the filter, making sure
it is sitting correctly.
- Reconnect the inlet hose to the tap.
- Turn on the tap.
• If there is a leak, the inlet hose might not be
on securely, or it may have been screwed on at
an angle. Unscrew and reconnect the water
inlet valve correctly.
Lower Spray Arm
• Check that the water jet holes are not blocked.
• If cleaning is required, remove the arm by
pulling up.
• Clean the spray arm and replace it pulling down.
• Reconnect power supply.
26
TROUBLE SHOOTING GUIDE
•If a problem occurs check below to see whether this can be solved.
•In the unlikely event that the problem cannot be rectified, please contact a service engineer.
Before calling for service
Problem
Possible Causes
Solution
• Check the plug.
• Plug is not properly inserted into
the socket.
• Check the electricity.
• Call for service.
No lights come on when
the power is turned on.
• Fuses blown or circuit breaker
tripped.
• The electricity from the house was
cut off.
The machine does not
start.
• Door is not fully closed.
• The start button is not pressed.
• Close the door.
• Press the start button.
The spray arms do not
rotate smoothly.
• The mounting of the spray arms is
blocked by food particles.
• Clean the holes of the
spray arm.
• The amount of detergent or rinse-
aid set incorrectly.
• The salt container is empty.
• The salt container cap is not
securely screwed on.
• Check the detergent
or rinse-aid.
• Check the salt
container or cap.
White deposits are left
on the dishwasher after
washing.
Streaks are left on
glassware.
• Too little Rinse-Aid dispensed.
• Too little Rinse-Aid dispensed.
• Fill the rinse-aid.
• Adjust the level of
rinse-aid container.
Dry results are not
satisfactory.
• Incorrect amount of detergent.
• Utensils incorrectly arranged or
overloaded.
• Filters are clogged.
• Water jet holes of spray arms
blocked.
Washing results are not
satisfactory.
• Spray arm's rotation obstructed by
utensils.
• Unsuitable programme selected.
27
TROUBLE SHOOTING GUIDE
Before calling for service
Problem
Possible Causes
Solution
• The drain hose is kinked.
• The filter is clogged.
• Straighten hose(s).
• Clean the filter.
The display shows OE
code. (Water is not
pumped away.)
• Motor trouble.
(Washing motor or Drain motor)
• If you can not solve the
problem, call for
service.
• Check the water tap.
• If you can not solve the
problem, call for
service.
• Water is not supplied.
The display shows IE
code.
• Water tap is not opened.
• Water sensor has trouble.
• Water is leaking from the hose
connections.
The display shows AE
code.
(Automatically Drain
pump operated.)
• Damage to the unit has been
caused by a water leak.
• Excessive water is supplied, which
is more than the normal water level.
The display shows FE
code. (Automatically
Drain pump operated.)
• Close the water tap
and unplug the power
plug.
• There is a problem with the inlet
valve.
• Call for service.
The display shows HE
code.
• The water heater circuit is damaged.
The display shows tE
• Thermistor trouble or very high inlet
code.
water temperature.
The display shows LE
code.
• Motor trouble.
The display shows nE
code.
• Vario motor trouble.
28
TROUBLE SHOOTING GUIDE
•These are not error codes indicating a malfunction.
Before calling for service
Description
This indicates there was a power failure. This function protects
the dishwasher in the event that the power goes out or the power
to the unit is disrupted. When power is returned, and a button is
pushed, this will display for 3 seconds and then go away.
The display shows
PF code
Cd means Cool-dry. This is an additional drying cycle to assist
drying performance. This cycle runs for a further 60 minutes after
the course has finished. It can be interrupted at any time by
opening the door.
The display shows
Cd code
CL means Child-Lock. This function is used to lock or unlock
the control buttons to prevent all the settings from being changed
by a child. It can only be activated during the wash cycle.
The display shows
CL code
When the unit is displaying F, the sensor is measuring the
water clarity. After 5 minutes of sensing (except draining and
filling), the unit's display will then show the processing time.
The display shows
F code
This is not an error code, but indicates the setting of the delay
start. To cancel the function, turn the power off. To change the
course and option, open the door and select another course and
option. Countdown will then continue after door is closed again.
The display shows
numbers between 1 ~ 19
This is not an error. When you open the door right after heating
wash, rinse or dry, buzzing sound would keep on ringing for
safety if the inside is heated.
Buzzing sound.
(High Temperature Alarm)
If the dishwasher is not used daily, we recommend to run a
Quick cycle once or twice a day until you have a full load.
In case odor still persists, run a vinegar rinse through a Auto
cycle by putting 2cup(500ml) of white vinegar in an upright
measuring cup in the lower rack, without detergent.
We recommend to maintain according to the USER
MAINTENANCE INSTRUCTIONS.
Odor
29
TROUBLE SHOOTING GUIDE
NOTE
SMARTDIAGNOSIS function is available only for the products with a SMARTDIAGNOSIS mark.
In case of a mobile phone with static option, the smart diagnosis function might not operate.
TM
Using SMARTDIAGNOSIS
Only use this feature when instructed to do so by the call centre.
The transmission sounds similar to a fax machine, and so has no meaning except to the call
centre.
SMARTDIAGNOSIS™ can not be activated if the dishwasher does not power up.
If this happens, then troubleshooting must be done without SMARTDIAGNOSIS™ .
If you experience problems with your dishwasher, call the Customer information centre.
Follow the call centre agent's instructions, and do the following steps when requested:
1. Press the Power button to turn on the dishwasher.
Do not press any other buttons.
2. When instructed to do so by the call centre, place the
mouthpiece of your phone very close to the Power button.
(Max. 10mm)
3. Press and hold the Auto and Eco buttons for three
seconds, while holding the phone mouthpiece to the
icon or Power button.
4. Keep the phone in place until the tone transmission has finished.
This takes about 6 seconds, and the display will count down the time.
• For best results, do not move the phone while the tones are being transmitted.
• If the call centre agent is not able to get an accurate recording of the data, you may be asked
to try again.
5. Once the countdown is over and the tones have stopped, the machine will display END and
turn off automatically after a few seconds.
Resume your conversation with the call centre agent, who will then be able to assist you using
the information transmitted for analysis at the call to Customer information centre.
■ Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional
method of troubleshooting through service calls. The effectiveness of this feature depends
upon various factors, including, but not limited to, the reception of the cellular phone being
used for transmission, any external noise that may be present during the transmission, and
the acoustics of the room where the machine is located. Accordingly, LG does not guarantee
that Smart Diagnosis would accurately troubleshoot any given issue.
30
SPECIFICATION
Capacity
14 Place settings
Weight
See rating label
Power Supply
See rating label
1900 W
0.49 W
(The off mode. The left-on
Power
Consumption
mode)
Water Feed Pressure 50 ~ 800 kPa
31
|