System
Operating Manual
FUJITSU LIFEBOOK P728
FUJITSU LIFEBOOK P7288
Operating Manual
121
Copyright and Trademark Information
Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness
of this document; however, as ongoing development efforts are continually improving the
capabilities of our products, we cannot guarantee the accuracy of the contents of this
document. We disclaim liability for errors, omissions, or future changes.
Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited
or its subsidiaries in the United States and other countries.
Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or
its subsidiaries in the United States and other countries.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., USA.
The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI
Logo are either a registered trademarks or trademarks of HDMI Licensing, LLC
in the United States and/or other countries.
Adobe, Acrobat, and Adobe Reader are either a registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other countries.
USB Type-C is a trademark or registered trademark of the USB Implementers
Forum in the USA and other countries.
USB Type-C is a trademark or registered trademark of the USB Implementers
Forum in Canada and other countries.
All other trademarks specified here are the property of their respective owners.
Contents
Contents
Declarations of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Ports and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Additional safety notes for devices with radio components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Energy saving under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Traveling with your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Before you travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Transporting the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Storing the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Further information on cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
First-time setup of your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Unpacking and checking the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Choose a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Switching on the device for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installing Bonus Apps (Windows 10 Pro and Home configurations) . . . . . . . . . . . . . . . . . . . . . . 23
Installing Bonus Apps (Windows 10 S configurations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Working with the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Opening the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Switching the notebook on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Programming the ON/OFF switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Different ways to use your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
From notebook to Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Select display orientation (portrait or landscape format) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
From Tablet PC to notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Switching off the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Closing the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Handwriting recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
LCD screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the device as a Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using your fingers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using the device as a notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Touchpad and touchpad buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Hot keys and function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
F Lock settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Virtual number keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Country and keyboard settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Fujitsu
3
Contents
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Charging, caring for and maintaining the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Removing and installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Using the energy saving functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Speaker and microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Optional wireless LAN / Bluetooth wireless components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Configuring WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Further information on WLAN and Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Ethernet and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Your USB Type-C dock (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Ports on the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Setting up the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Connecting the AC adapter to the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Connecting the notebook to the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Switching on the notebook via the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Switching off notebook via dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Disconnecting the notebook from the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Brief overview of the security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Configuring the fingerprint sensor (configuration dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Configuring the palm vein sensor (configuration dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Using the Security Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Configuring password protection in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Protecting BIOS Setup Utility (supervisor password and user password) . . . . . . . . . . . . . . . . . 66
Password protection for booting the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Password protection for the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Smart Card reader (configuration-dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Inserting the Smart Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Trusted Platform Module - TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Enabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Disabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
HDMI port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Connecting an external monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
USB port with charging function (USB Type-C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
USB port with charging function (Anytime USB charge) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
How to remove USB devices correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Headphones/microphone/Line-In/Line-Out/ headset-combi port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Removing and installing components during servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Notes on installing and removing boards and components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Preparing to remove components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Remove the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Removing and installing memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Removing a memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Installing a memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
4
Fujitsu
Contents
Installing and removing an M.2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Removing the M.2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Installing the M.2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Finishing component removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Settings in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Starting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
BIOS Setup Utility operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . 88
Exit Discarding Changes - Reject changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . 88
Load Setup Defaults – load default values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Discard Changes - Discard Changes without exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . 88
Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . 88
Save changes and power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
In the event you need to recover your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
The notebook’s date or time is incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Battery indicator does not illuminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
When certain characters are entered on the keyboard, only numerals are written . . . . . . . . . . . . . 90
The notebook’s LCD screen remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
The LCD screen of the notebook is difficult to read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
The external monitor remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
The external monitor is blank or the image is unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
The cursor does not correctly follow the stylus movements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Stylus input not working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
The notebook does not start after switching it on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
The notebook stops working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
The printer does not print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
The wireless connection to a network does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
The battery discharges too quickly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Smart Card reader is not recognized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Smart Card PIN forgotten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Smart Card lost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
User and/or supervisor SmartCard lost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Acoustic warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Error messages on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
WLAN specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
USB Type-C dock (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
AC adapter for use with notebook and USB Type-C dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Manufacturer’s notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Recycling your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
DOC (Industry CANADA) Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
UL Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Fujitsu
5
Contents
FCC Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Regulatory Notes and Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Wireless LAN, Health and Authorization for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Regulatory Information/Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Federal Communications Commission statement: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
FCC Interference Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
FCC Radio Frequency Exposure statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Export restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Restrictions concernant l’exportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Canada, Industry Canada (IC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Avis pour le Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Before Using the Optional Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Wireless LAN Devices Covered by this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Characteristics of the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Wireless LAN Modes Using this Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Deactivating/Disconnecting the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Configuring the Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Configuring the WLAN Using Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Connection to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Troubleshooting the WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Using the Bluetooth Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Image Backup and Recovery Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Windows 10 Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Creating a recovery drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Recovery options in Windows 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Downloading driver updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
6
Fujitsu
Declarations of conformity
Declarations of conformity
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name: Fujitsu America, Inc.
Address:
1250 E. Arques Avenue
Sunnyvale, CA 94085
(408) 746-6000
Telephone:
Declares that product:
Base Model Configuration: LIFEBOOK P728 Notebook
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject to the
following two conditions: (1) This device may not cause harmful interference. (2) This
device must accept any interference received, including interference that may cause
undesired operation.
This device is compliant with SAR or general population / uncontrolled exposure
limits of FCC rules and KDB procedures tested in accordance with IEEE1528:2013
standards. This device has been tested and meets the FCC IC RF exposure guidelines
when tested with the device operation conditions.
Fujitsu
7
Declarations of conformity
1
1
= Declaration of conformity
8
Fujitsu
Fujitsu Contact Information
Fujitsu Contact Information
Service and Support
You can contact Fujitsu Service and Support in the following ways:
•
•
Toll free phone: 1-800-8Fujitsu (1-800-838-5487)
Before you place the call, have the following information ready so that the customer
support representative can provide you with the fastest possible solution:
•
•
•
•
•
•
•
Product name
Product configuration number
Product serial number
Purchase date
Conditions under which the problem occurred
Any error messages that have occurred
Type of device connected, if any
Fujitsu Shopping Online
Maintaining Latest Configuration
To ensure that you always have the most current driver updates related to your system, you should
occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is
available from the Fujitsu Support site. FSDM will allow you to view a list of the most current
drivers, utilities and applications to determine whether you have the latest versions. If you have
a Windows 10 operating system, you will need to go to the Support Site to download the FSDM
Limited Warranty
Your LIFEBOOK notebook is backed by a Fujitsu International Limited Warranty. Check the
Limited Warranty Terms and Conditions Booklet that came with your notebook.
Fujitsu
9
Fujitsu Contact Information
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
this warning will endanger your life, will damage the device or lead to loss
of data. The warranty will be invalidated if the device becomes defective
through failure to observe these warnings.
Indicates important information which is required to use the device properly.
►
indicates an activity that must be performed
indicates a result
ꢀ
This style
indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This style
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This style
indicates
•
•
terms and texts used in a software interface, e.g.: Click on Save.
names of programs or files, e.g. Windows or setup.exe.
"This style"
indicates
•
•
Cross-references to another section, e.g. "Safety information"
cross-references to an external source, e.g. a web address: For more
information, go to "http://solutions.us.fujitsu.com/"
•
names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key
F10
indicates a key on the keyboard, e.g:
This style
indicates terms and text that are emphasized or highlighted, e.g.: Do not
switch off the device
10
Fujitsu
Ports and controls
Ports and controls
This chapter presents the individual hardware components of your device. It gives an
overview of the indicators and connections of the device. Please familiarize yourself
with these items before you start to work with the device.
Notebook open
1
2
3
1
9
4
5
4
8
5
7
6
1
2
3
4
5
= Microphone
= Webcam
6
= Fingerprint sensor or palm sensor
(configuration dependent)
7
8
9
= Touchpad buttons
= Touchpad
= Webcam LED
= Speaker
= Ambient light sensor
= Status indicators
Fujitsu
11
Ports and controls
Left side
1
2
3
4
5
1
2
3
= DC input connector (DC IN)
= LAN port
= USB 3.1 port with charging function
(USB Type-C™
4
5
= USB 3.0 port with charging function
(Anytime USB charge)
= SmartCard reader
)
Right side
4
1 2
3
5
6
7
8
9
10
1
2
3
4
5
= Slot for stylus
6
7
8
9
= Memory card slot
= USB port 3.0
= HDMI port
= Fastening eyelet for optional stylus tether
= ON/OFF switch
= Power-on indicator
= External monitor port (VGA)
= Combined headphones/microphone port
10 = Security Lock device
12
Fujitsu
Ports and controls
Bottom
1
2
2
3
4
1
2
3
= Battery compartment
4
= Memory upgrade compartment and
M.2 module
= Battery lock slider switch
= Battery replacement status indicator
Fujitsu
13
Important notes
Safety instructions
SIn
a
fofermtyaintif
o
onrmation
,
Please observe the following safety information.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
your notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Please refer to the notes in the chapter "Removing and installing
When handling this device, you will come into contact with lead, a chemical which in
California is held to be a possible cause of birth defects and other damage to fertility.
Wash your hands after using the device.
Avoid placing your computer on uneven or unstable work surface.
Do not place objects or apply heavy pressure on your computer.
Do not apply too much force to the display corners.
Do not rotate display with excessive force.
Do not pick up or hold the computer by display only.
Do not shake or bump the display.
Avoid excessive vibration and shocks.
Avoid excess force when tapping or writing on the screen.
Do not block the air vents.
Do not leave the computer turned on when enclosed in briefcase or backpack.
In the event you drop your notebook or damage the the housing in any way,
immediately turn off power and disconnect the power plug. Failure to do so
could result in a short circuit, smoke, and/of fire. Contact Fujitsu Service and
Support to learn how to get the computer repaired.
This notebook complies with the relevant safety regulations for data processing equipment.
If you have any questions about setting up your notebook in the intended environment,
please contact your sales outlet or our Hotline/Service Desk.
Fujitsu
15
Important notes
Additional safety notes for devices with
radio components
RWBlauir
d
eitloeo
c
soosthmL,ApSNo
a
n
fe
e
t
nytnotes
s
If a radio component (Wireless LAN, Bluetooth) is incorporated in your notebook, you must
be sure to observe the following safety notes when using your notebook:
•
•
Switch off the radio components when you are in an aircraft or driving in a car.
Switch off the radio components when you are in a hospital, an operating room or near a medical
electronics system. The transmitted radio waves can impair the operation of medical devices.
•
Switch off the radio components, when you let the device get near flammable gases
or into hazardous environments (e.g. gas station, paintshops), as the transmitted
radio waves can cause an explosion or a fire.
For further information on how to switch the radio components on and off, refer
Energy saving
NEPnoewtergs saving
e
ry
Switch the notebook off when it is not in use. Switch off any connected external devices when
they are not in use. If you use the energy saving functions, the notebook uses less power. You
will then be able to work for longer before having to recharge the battery.
The energy efficiency is increased and environmental pollution is reduced.
You save money and help protect the environment.
Energy saving under Windows
►
Make use of the available energy saving functions as described in chapter
16
Fujitsu
Important notes
Traveling with your notebook
MTN
r
o
oa
t
bneissble oprkteration
p
o
o
Please observe the points listed below when traveling with your notebook.
Before you travel
►
►
Back up important data stored on your hard disk.
NTr
o
a
t
v
e
e
b
l
o
in
o
g
k
,
notebook
Switch off the radio component for data security reasons. With data traffic via a wireless
connection, it is also possible for unauthorized third parties to receive data.
Information on activating data encryption is provided in the documentation
for your radio component.
►
If you wish to use your notebook during a flight, check with the flight attendants if its use is safe.
When traveling in other countries
►
If you are traveling abroad, check that the AC adapter can be operated with the local AC
voltage. If this is not the case, obtain the appropriate AC adapter for your notebook.
Do not use any other converter!
►
►
►
Check whether the local AC voltage and the AC cable are compatible. If this is not
the case, buy an AC cable that suits the local conditions.
Enquire with the corresponding government office of the country you will be traveling to,
whether you may use your notebook with its integrated radio component there.
Take the necessary travel adapters with you when traveling abroad. Check the following
table to see which travel adapters you will need, or ask your travel organizer.
Power connection
Travel destination
United States, Canada, Mexico, parts of Latin
America, Japan, Korea, Philippines, Taiwan
Russia and the Commonwealth of Independent
States (CIS), much of Europe, parts of Latin
America, the Middle East, parts of Africa, Hong
Kong, India, much of south-east Asia
United Kingdom, Ireland, Malaya, Singapore,
parts of Africa
China, Australia, New Zealand
Fujitsu
17
Important notes
Transporting the notebook
Protect the notebook against severe shocks and extreme temperatures
(e.g. direct sunlight in a car).
•
•
•
Do not transport the notebook while it is switched on.
Carry your notebook with you while traveling. Do not check it in as baggage.
Never put your notebook through a metal detector. Have it hand-inspected by
security personnel. You can, however, put your notebook through a correctly set
X-ray machine. To avoid problems, place the notebook as close as possible
to the entrance of the machine and remove it as soon as possible or have it
hand-inspected by security personnel. Security officials may require you to switch
your notebook on. So make sure you have a charged battery on hand for this.
►
►
►
►
Switch the notebook off.
Unplug the AC plug of the AC adapter and all external devices from the power outlets.
Disconnect the AC adapter cable and the data cables for all external devices.
To protect against damaging jolts and bumps, use a notebook carrying
case to transport your notebook.
Storing the notebook
•
•
•
If storing your notebook for a month or longer, turn it off, fully charge the battery, then
remove and store all the Lithium Polymer batteries in a suitable location.
Store your notebook in a cool dry location. Temperatures should remain
between 13 ºF / -25 ºC and 140 ºF / 60 ºC.
Store your notebook and batteries separately. If you store your notebook with a
battery installed, the battery will discharge, and battery life will be reduced. In
addition, a faulty battery might damage your notebook.
•
•
•
Always power off the notebook before transporting and/or packaging it.
After shutting down the notebook, wait until the status LED panel indicates
the power-off condition (i.e., no lights are illuminated).
It is possible that the notebook may not automatically go to power-off or sleep mode
when you close the lid. This situation may occur due to pre-operating system boot
password security settings or some other application running on the notebook.
Attempting to transport the notebook while power is on may damage
the notebook due to shock or overheating.
18
Fujitsu
Important notes
Cleaning the notebook
•
Use of incorrect cleaners can result in optical impairment of the LCD and / or
damage to the notebook. Always refer to the cleaner manufacturer’s guidelines and
material safety data sheets for proper handling and use of the products.
•
Never use ammonia, acidic, or alkaline cleaners or organic chemicals
such as paint thinner, acetone or kerosene. It may damage surface
finishes and the coating of the LCD screen.
•
•
Never use compressed air for cleaning the notebook.
If your notebook has a Smart Card slot, be very careful to avoid any liquid
entering the slot as this can damage the notebook.
Further information on cleaning the notebook
The notebook does not float.
If the notebook is exposed to water or other liquids with its connections open, liquid
can penetrate the notebook and cause a malfunction. Do not continue to use the
notebook. Switch it off and contact our hotline / our service desk (see enclosed list of
Fujitsu
19
First-time setup of your device
First-time setup of your device
FGierstti-
n
ti
g
m
s
e
tasretetup
d
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before switching it on for the first time, connect the device to the AC voltage using
remain connected during the whole of the installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
When the device is delivered, the battery is located in the battery compartment. The battery
must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and checking the device
If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
►
►
Unpack all the individual parts.
PTra
a
c
n
k
s
a
p
g
oinrt
g
Check your device for any visible damage which may have occurred during transportation.
You may need to reuse the packaging in the future, for example if
you need to ship your device.
20
Fujitsu
First-time setup of your device
Choose a location
CSAeChto
a
u
o
d
p
s
a
e
ptelorcation
a
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
•
•
•
•
•
Never place the device or the AC adapter on a heat-sensitive surface.
The surface could be damaged as a result.
Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
The underside of the device heats up during normal operation. Prolonged contact
with the skin can become unpleasant or even result in burns.
Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
Keep other objects at least 100 mm / 3.94 inches away from the device
and its AC adapter to ensure adequate ventilation.
•
•
Never cover the ventilation openings of the device.
Do not expose the device to extreme environmental conditions.
Protect the device against dust, humidity and heat.
Connecting the AC adapter
MACaka
i
d
n
a
gpreteadytouse
r
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied AC cable conforms to the requirements of the country in which
you purchased your device. Make sure that the AC cable is approved for
use in the country in which you intend to use it.
►
►
►
Connect the AC cable (1) to the AC adapter.
Plug the AC cable (2) into a power outlet.
Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.
3
2
1
Fujitsu
21
First-time setup of your device
Switching on the device for the first time
Switchingonforthefirsttime
To make it easier to use your device for the first time, the operating system
is pre-installed on the hard disk.
1
►
Slide the ON/OFF switch (1) to the right to switch on the notebook.
The ON/OFF switch returns automatically to its original position.
During the installation process, follow the on-screen instructions.
ꢀ
►
You can find information and help on the Windows operating system functions
22
Fujitsu
First-time setup of your device
Installing Bonus Apps (Windows 10 Pro and
Home configurations)
BonusApps
Certain applications need to be activated before using your device.
►
►
►
►
►
In order to activate these applications, click on the Start menu.
Click on Settings.
Select Extras.
Click and open each of these applications.
Repeat these steps for each user account.
Note that in some cases (depending upon which application was selected for
installation) after installation completes, the system will prompt you to reboot.
There are also cases in which if multiple applications are selected to install
but one of them needs a reboot, the system will reboot and continue
installing the rest of the selected applications.
Installing Bonus Apps (Windows 10 S configurations)
The following applications need to be activated before using your device.
•
Battery Change Utility
•
Battery Utility
•
FUJ02E3 Device Utility
•
LIFEBOOK Application Panel
Mic Mute Utility
•
•
Pen Low Battery Notification
Pointing Device Utility for P728
In order to activate these applications, click on the Start menu.
Click on Settings.
•
►
►
►
►
Select Extras.
Restart the system to see those application in the Start menu.
Fujitsu
23
Working with the notebook
Working with the notebook
ONopterbatiokn,notebook
e
o
This chapter describes the basics for operating your notebook. Please refer to
"Connecting external devices", Page 70 for instructions on how to connect external
devices such as a mouse and a printer to the notebook.
Status indicators
Statusindicators
The status indicators provide information about the status of the power supply,
the hard disks and the keyboard functions.
F
24
Fujitsu
Working with the notebook
Display
Description
Power-on indicator/Standby
SPto
a
w
n
e
drb-yoin
n
idnidcactaotror
i
•
•
•
The indicator is illuminated: The notebook is switched on.
The indicator flashes: The notebook is in sleep mode (Save-to-RAM).
The indicator is not lit up: The notebook is switched off or the notebook is
in Save-to-Disk mode.
Battery charging indicator/AC connection
The charging state of the battery is shown by the rechargeable battery indicator.
With AC adapter connected:
•
•
•
The indicator lights up white: The rechargeable battery is charged or no
rechargeable battery is inserted.
The indicator light is orange: The AC adapter is connected and the battery
is being charged.
The indicator is flashing orange: The AC adapter is connected but the battery
cannot be charged as the battery is too hot or too cold for charging. The
charging process is continued as soon as the rechargeable battery has reached
a permissible temperature again.
•
•
The indicator is flashing red: A fault has occurred.
The indicator is not lit up: The battery is not being charged (the battery is
already more than 90% charged or the AC adapter is not connected).
Batterysinytdaitcuasotinol rdicator
m
b
Battery indicator
•
•
•
•
The indicator lights up white: The rechargeable battery is charged to between
51% and 100 % of its maximum capacity.
The indicator light is orange: The rechargeable battery is charged to between
13 % and 50 % of its maximum capacity.
The indicator lights up red: The rechargeable battery is charged to between
0 % and 12 % of its maximum capacity.
The indicator is flashing orange: The battery charging level is being checked
(for four seconds after battery installation).
•
•
The indicator is flashing red: A fault has occurred.
The indicator is not lit up: There is no battery installed.
Drive indicator
DIn
r
divicator
e
The indicator is illuminated: The hard disk drive is being accessed.
Wireless indicator
•
The indicator is illuminated: The wireless components are switched on.
•
Indicator is off: The wireless components are switched off.
F Lock indicator
IF
n
L
d
o
ic
ator
c
k
F
F
Fn
The indicator is illuminated: The key combination
Fn
+
has been pressed.
be executed by pressing the keys directly without also having to press the
key.
Fujitsu
25
Working with the notebook
Display
Description
Num Lock indicator
IN
n
u
d
m
icaLtocrk
o
Num
The indicator is illuminated: The
key has been pressed. The virtual number
keys have been switched on. You can output the characters indicated on the upper
right of the keys.
Caps Lock indicator
IC
n
a
d
p
icsLtorck
a
The indicator is illuminated: The Caps Lock key has been pressed. All the
characters you type will appear in upper case. In the case of overlay keys, the
character printed on the upper left of the key will appear when that key is pressed.
Scroll Lock indicator
IS
n
c
d
r
i
oclalLtoock
r
Fn
Rol
has been pressed.
The indicator is illuminated: The key combination
+
The effect that this key has varies between applications.
Battery replacement indicator
If the battery is unlocked for battery replacement, the battery replacement indicator
will show whether the device is ready for battery replacement (see "Removing a
battery", Page 50). You can replace the device’s battery without having to switch
the device off first. The device has a built-in bridge battery for this purpose. If
the battery is unlocked while the device is in operating mode, Sleep Mode will
automatically be activated.
•
The indicator light is green: The device is ready for battery replacement.
Replace the battery.
•
The indicator is flashing orange: The device is ready for battery replacement
but the battery charging level of the bridge battery is low.
Replace the battery quickly.
Caution: If the battery replacement takes too long, the device may switch itself
off. Any data not saved may be lost.
•
The indicator light is orange: The device is not yet ready for battery replacement
as Sleep Mode has not yet been activated.
Wait until the indicator lights up green.
There is a possibility of not shifting to sleep mode even if the battery lock is
released when the system is at high load.
Caution: If the battery is replaced now, the device may switch itself off. Any
data not saved may be lost.
•
•
The indicator lights up red: The device is not ready for battery replacement.
Lock the battery again. Connect the device to the AC adapter to charge the
bridge battery.
After a short charging time, the battery replacement can be attempted again.
Caution: If the battery is replaced now, the device may switch itself off. Any
data not saved may be lost.
The indicator is flashing red: Error in the bridge battery.
Shut down the device.
Connect the device to the AC adapter.
If the status indicator flashes red again, contact the Service Desk.
26
Fujitsu
Working with the notebook
Switching the notebook on
NPowte
e
b
r
o-onk:insdwiictcahtoin on
r
g
1
►
Slide the ON/OFF switch (1) to the right to switch on the notebook.
The ON/OFF switch (1) returns automatically to its original position.
ꢀ
The power-on indicator next to the ON/OFF switch (1) is lit as long as the system is switched on.
Programming the ON/OFF switch
You can program the ON/OFF switch:
Operating system
Menu
Windows 10 Start - Control Panel - (Browse Control
Panel - ) Power Options - Choose what the power
buttons do
Windows® 10 Pro, Home and S
If you have assigned a password, you must enter this when requested to
do so, in order to start the operating system. Detailed information can be
28
Fujitsu
Working with the notebook
Different ways to use your notebook
The different working modes allow you to use your device in a number of different usage scenarios.
Laptop Mode
Stand Mode
Tent Mode
Tablet Mode
OS Mode
Desktop
OFF
Tablet
ON
Windows 10
Pro
Auto rotation
Keyboard /
Touchpad
ON
OFF
OS Mode
Auto rotation
Keyboard
Desktop
OFF
Desktop
OFF
Tablet
ON
Windows 10 S
OFF
ON
ON
ON
OFF
Touchpad
From notebook to Tablet PC
►
Raise the LCD screen into a vertical position.
Fujitsu
29
Working with the notebook
You can fold back the LCD screen infinitely variable in an angle
between 0 and 360 degrees,
►
Fold the screen down completely until the back of the screen is positioned
against the bottom of the device.
The screen is now in the tablet position. The keyboard, the touchpad and the
touchpad buttons are switched off in this position.
Select display orientation (portrait or landscape format)
LPD
a
ois
n
rptdrlsaciytafo
o
p
r
ri
e
mefnoatrtatioant
m
You can choose to use either portrait or landscape for the display, or whether the screen
orientation should automatically adjust to the orientation of the tablet PC.
You can change these settings under Control Panel - Hardware and Sound
- Windows Mobility Center / Rotate screen.
In the settings there are profiles saved for operation with different screen orientations.
These profiles have preset standard configurations that can be modified as desired.
These settings do not just affect the screen settings on the Tablet PC, but
also on external monitors that are connected.
30
Fujitsu
Working with the notebook
Closing the notebook
►
Fold the LCD screen onto the lower section of the notebook.
Handwriting recognition
For detailed information on handwriting recognition, see the documentation for your operating system.
At present, handwriting recognition on Windows supports the following languages:
English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch,
Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,
Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.
On Windows you can set the required language under Control Panel – Time,
Language and Region – Language.
Fujitsu
33
Working with the notebook
LCD screen
LNCoDtescreen
Background lighting
LCD screens are operated with background lighting. The luminosity of the background
lighting can decrease during the period of use of the notebook. However, you can
set the brightness of your monitor individually.
Synchronizing the display on the LCD screen and an external monitor
"Switching between display outputs".
Using the device as a Tablet PC
You can execute commands as follows:
•
•
using the stylus (supplied with your device).
using your finger
Using your fingers
You can execute certain commands by using your finger tip on the touchscreen of your device.
Alternatively, everything which you can select or activate using your finger
tip can also be selected or activated using the stylus.
Calibrating the Dual Digitizer for finger-based operation of the device
to calibrate your device to use Dual Digitizer Technology.
Please note: There are separate calibration programs available for calibrating
the stylus and for calibrating finger-based operation. Do not use the calibration
tool for the stylus to calibrate finger-based operation.
34
Fujitsu
Working with the notebook
Using the stylus
Pen
1 = stylus tip
5
2 = stylus button (= eraser)
4
3 = stylus button (= right mouse button)
4 = charging contacts
5 = eyelet for optional stylus tether
3
2
1
Software will need to be downloaded which includes an overview on the
You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to
navigate through the programs. Programs that support handwriting recognition also allow you to
write directly on the screen with the stylus. You can also use the stylus as a drawing tool.
A stylus tether is available as an optional extra and you can use this to tie the
eyelet on the stylus to the eyelet on the Tablet PC.
Use only the stylus that was provided with your Tablet PC. Do not use any other pointed
object as a substitute, that was not specially designed for your Tablet PC. Replace
the stylus tip if it is worn. The warranty does not cover a scratched screen.
While writing, take care that you do not scratch the surface of the
display (e.g. with a wristwatch or bracelet).
To prevent the stylus from jamming in its slot, always make sure that
you insert the stylus correctly into its slot (the charging contacts on the
stylus point towards the rear of the Tablet PC).
Fujitsu
35
Working with the notebook
The stylus of the Tablet PC is an electronic instrument that can be damaged
if used improperly. Handle the stylus with care.
Our recommendations for proper handling of the stylus are as follows:
•
•
•
•
Do not gesture with the stylus.
Do not use the stylus as a pointer.
Do not use the stylus on surfaces other than the screen of the Tablet PC.
Do not try to turn the grip of the stylus. The grip is used to put the
stylus into its slot or to take it out of its slot.
•
Never store the stylus with its weight on the tip (e.g. with the tip pointing down in a
pen container). If the stylus is stored with the tip pointing down, this may have an
adverse effect on the stylus mechanism (particularly under high temperatures). In
this case the stylus tip may react as though it is constantly being pressed down. To
avoid damage, the stylus should be stored in the slot when not in use.
The stylus can be influenced by electromagnetic fields (cursor quivers or
jumps). There may be a few areas on the screen where the cursor quivers
slightly in spite of pressing the stylus down firmly.
The screen responds to entries made with the tip of the finger or the stylus when the
tip of the finger or the stylus directly touches the screen.
You can use the stylus to perform almost all functions for which you would otherwise use a mouse.
Action
Mouse
Stylus
Selecting menu
items
Click with the left mouse button.
Tap on the menu entry with the tip of
the stylus.
Starting programs Double-click with the left mouse
button.
Tap on the program symbol twice in
rapid succession using the stylus tip.
Moving an object Drag with the left mouse button
Place the stylus tip directly on the
object or window. Keep the stylus tip
held against the screen. Drag the
desired object or window.
or window
pressed.
Opening a context Click with the right mouse button.
menu
Tap on the desired element with the
stylus and keep the stylus pressed
against the screen.
Moving the cursor Move the mouse
Place the tip of the stylus directly on
the screen.
Energy saving functions of the stylus
To save energy, the stylus automatically switches off after 10 minutes of inactivity
and switches to power saving mode.
The stylus automatically returns to normal operating mode when the stylus tip is touched again.
36
Fujitsu
Working with the notebook
Charging the stylus battery
The stylus contains a built-in battery, which is automatically charged when the stylus is fully inserted
in its slot. The stylus is also charged when the notebook is in power saving mode or is switched off.
A charging time of approximately 15 seconds is sufficient to able to stylus to be used for 90 minutes.
►
Insert the stylus fully into the slot.
After a charging period of approximately 5
minutes, the stylus battery is fully charged.
ꢀ
Adjusting the stylus
Operating system
Menu
Windows® 10 Pro,
Home and S
Under System Control - Hardware and Sound - Pen and Touch you can make
various settings for the stylus.
Calibrating the stylus
Before first use with the stylus, you must calibrate your Tablet PC via the operating
system, so that it recognizes the stylus as accurately as possible.
You should also always repeat the calibration if the co-ordination between the
stylus and the cursor movement deteriorates.
Operating system
Menu
Windows® 10 Pro,
Home and S
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the
Control Panel. You need to calibrate both portrait and landscape formats.
Fujitsu
37
Working with the notebook
Securing a stylus tether
You can secure the stylus with a stylus tether to prevent accidentally dropping it or losing it.
►
►
Secure the end of the stylus tether with the smaller loop to your stylus.
Secure the end of the stylus tether with the larger loop to your notebook.
38
Fujitsu
Working with the notebook
Using the device as a notebook
Touchpad and touchpad buttons
Keep the touchpad clean. Protect it from dirt, liquids and grease.
Touchpad
Do not use the touchpad if your fingers are dirty.
Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.
1 = Touchpad
1
2 = Touchpad buttons
2
The touchpad enables you to move the mouse pointer on the monitor.
The touchpad buttons allow you to select and execute commands. They correspond
to the buttons on a conventional mouse.
You can also deactivate the touchpad via a key, so that you cannot move the pointer
Moving the pointer
►
Move your finger on the touchpad.
Touchpad
The pointer will move.
ꢀ
Selecting an item
►
►
ꢀ
Move the pointer to the item you wish to select.
Touchpad
Tap the touchpad once or press the left button once.
The item is selected.
Executing commands
►
►
ꢀ
Move the pointer to the field you wish to select.
Touchpad
Tap the touchpad twice or press the left button twice.
The command is executed.
Fujitsu
39
Working with the notebook
Dragging items
►
►
Select the desired item.
Touchpad
Press and hold the left button and drag the item to the desired position
with the finger on the touchpad.
The item will be moved.
ꢀ
Switching the Touchpad on and off
Keyboard
KNkeeu
y
ymseberaicrrkdkeeyyppaadd
b
o
The keyboard of your notebook is subject to continuous wear through normal
use. The key markings are especially prone to wear. The key markings are
liable to wear away over the life of the notebook.
The keyboard has been designed to provide all the functions of an enhanced keyboard.
Some enhanced keyboard functions are mapped with key combinations.
The following description of the keys applies to the Windows operating system. Additional functions
supported by the keys are described in the relevant manuals supplied with your application programs.
The following illustration shows how to access the different characters on keys with overlaid
functions. The example applies when the Caps Lock key has not been activated.
The illustration may differ from your device.
Depending on the region you live in, your notebook is delivered with a monolingual
keyboard layout (USA) or a bilingual keyboard layout (Canada).
40
Fujitsu
Working with the notebook
Key
Description
Backspace key
Backspace
The
key deletes the character to the left of the cursor.
Backspacekey
Tab key
Tab
The
key moves the cursor to the next tab stop.
Tabkey
Enter key (return)
Enter
The
key terminates a command line. The command you have entered
is executed when you press this key.
RELinen
t
e
eu
f
r
e
kn
e
ey
d
Caps Lock key
Caps Lock
Caps Lock Fix Maj
key activates the Caps Lock mode, and
The
/
the corresponding icon is displayed in the Windows information area. In
Caps Lock mode, all of the characters you type appear in upper case. In
the case of overlay keys, the character printed on the upper left of the key
will appear when that key is pressed. To cancel the Caps Lock function,
Bilingual keyboard:
simply press the Caps Lock key again.
CapsLockkey
Shift key
Shift
The
key causes uppercase characters to appear. In the case of
Shift
overlay keys, the character printed on the upper left of the key will appear
when that key is pressed.
Shiftkey
Fn key
Fn
The
key enables the special functions indicated on overlay keys.
Fnkey
Windows key
Windows
The
key switches between the start screen and the last used
application.
Windowskey
Alt key
Alt
The
key activates special functions when it is pressed in combination
with other keys.
Context Menu key
Context Menu
The
key opens the menu for the active application.
Bilingual keyboard:
Ctrl key
Ctrl
The
key activates special functions when it is pressed in combination
with other keys.
Fujitsu
41
Working with the notebook
Key
Description
Cursor keys
The cursor keys move the cursor in the direction of the arrow, i.e. up, down,
left, or right.
Cursorkcoenystrol
Home key
The
Home
Home/Debut
key jumps to the beginning of the line, document
/
page, cell or screen of where the cursor is positioned.
Bilingual keyboard:
Bilingual keyboard:
Bilingual keyboard:
End key
The
End
End/Fin
key jumps to the end of the line, document page, cell or
/
screen of where the cursor is positioned.
Insert key
When pressing the
modes:
Insert
Insert/Insér
key, you change between two input
/
1. Typeover mode: When typing, you overwrite the character at the current
cursor position.
2. Insert mode: While typing, another character at the current cursor
position is inserted. All characters right of the cursor will be shifted
by one position.
Delete key
When pressing the
Delete
Delete/Suppr
key, the character before the / on
/
the right of the cursor will be deleted.
Bilingual keyboard:
42
Fujitsu
Working with the notebook
Hot keys and function keys
The top row of your notebook’s keyboard has both hot key and function key icons:
1
2
3
4
1
2
= Top row of a monolingual keyboard layout
= Top row of a bilingual keyboard layout
3
4
= Hot key
= Function key
Hot keys
Hot keys are the icons on the top of the keys.
The hot keys activate features on your device (e. g. loudpeakers on/off, microphone enable/disable,
volume increase/decrease, brightness increase/decrease). Hot keys are convenience features.
Hot keys are always the primary key functionality at Windows startup (see
Hot key
Description
Enable/Disable the microphone*
This hot key enables and disables the microphone.
Microphone
Switch the speakers on and off
This hot key switches your notebook’s speakers off or on.
Speaker
Decrease the volume
This hot key reduces the volume of the internal speakers.
Volume
Increase volume
This hot key increases the volume of the internal speakers.
Volume
Switch the wireless components on/off*
This hot key switches the wireless components off or on.
Wirelesscomponents
Switch the touchpad and touchpad buttons on/off*
This hot keyswitches the touchpad and the touchpad buttons on or off.
Touchpadbuttons
Fujitsu
43
Working with the notebook
Hot key
Description
Decrease the brightness of the screen
This hot key decreases the brightness of the screen.
LB
C
rigD
h
s
t
cn
r
e
e
s
e
softhescreen
n
Increase the brightness of the screen
This hot key increases the brightness of the screen.
Brightnessofthescreen
Activate energy saving functions*
This hot key activates the Function Manager.
Energysavingfunctions
Switch between display outputs*
Use this hot key to select which screen(s) is/are used for display if an
external monitor is connected.
Screen output is possible:
•
•
only on the notebook’s LCD screen
on the LCD screen of the notebook and the external monitor at the
same time
•
only on the external monitor
This setting is useful if you would like a high resolution and a high
refresh rate on an external monitor.
FSnw+itFch10betweendisplayoutputs
Create a screnshot
With this hot key, a screenshot of the current screen image is created and
stored in the clipboard.
Bilingual keyboard:
Bilingual keyboard:
Enable/Disable virtual number keys
This hot key enables and disables the virtual number keys. Those characters
are issued, which are located at the top right corner of the respective keys.
* These functions do not work while the computer is at a high load.
Function keys
The function keys are the icons on the bottom of the keys.
F1
F12
The function keys are numbered from
up to
.
The function keys serve as short-cut key functions and activate operating
system and/or software functions.
Regardless of the F Lock setting, the function keys are always the primary key functionality:
•
•
until Windows is loaded (after rebooting the system).
Then the primary keys functionality are maintained from the last F Lock setting
Fn
F2
Fn
F2
F12
F12
when accessing BIOS during POST: If
+
or
+
or
are pressed during boot,
key alone.
the BIOS menu is not started. You must press the
44
Fujitsu
Working with the notebook
F Lock settings
F Lock
By pressing the
key, you may lock either the hot keys or function keys as the
primary or secondary key functionality for the top row of keys.
F Lock is set to off by default.
Fn
Esc
►
Press
+
to switch F Lock on or off.
Caps Lock
If F Lock is set on, it stays on like the key.
When switching the F Lock settings, the primary or secondary key functionality changes as follows:
ꢀ
Status
F Lock is off (F Lock indicator is Hot keys become the primary
not illuminated)
keys:
Press the hot key alone.
F Lock is on (F Lock indicator Hot keys become the secondary Function keys become the
Hot key
Function key
Function keys become the
secondary keys:
Fn
+ function key.
►
►
Press
is illuminated)
keys:
primary keys:
Press the function key
alone.
Fn
►
Press
+ hot key.
►
Key combinations
Keycombinations
The following description of key combinations applies to Windows operating systems. Some of the
following key combinations may not function in other operating systems or with certain device drivers.
Other key combinations are described in the relevant manuals supplied
with your application programs.
Key combinations are entered as follows:
►
►
Press the first key in the key combination and keep it pressed.
While holding the first key down, press the other key or keys in the combination.
Combination
Description
Switch F Lock setting on/off
This key combination switches the F Lock setting
Switch between open applications
This key combination switches between several open
applications.
Alt+Tab
Bilingual keyboard:
Fujitsu
45
Working with the notebook
Combination
Description
Open Windows Security/Task Manager window
This key combination opens the Windows
Security/Task Manager window.
Ctrl+Alt+Del
Bilingual keyboard:
Back tab
This key combination moves the cursor back to the
Shift
previous tab stop.
SBahcifkt+taTbab
Enable/Disable Scroll Lock
This key combination activates special functions,
which differ from application to application.
Fn+ScrollLock
Bilingual keyboard:
Toggle backlit keyboard settings
This key combination toggles the backlit
keyboard settings between low, high and off
(configuration-dependent).
SBahcifkt+taTbab
Key combinations using the Windows keys are detailed in the manual
for your operating system.
In addition, the following non-labeled key combinations are supported:
Fn
Fn
S
B
•
•
+
+
= Pause
= Break
Fn
R
•
+
= SysRq
46
Fujitsu
Working with the notebook
Virtual number keys
VN
i
u
rtmuaeLlro
n
ic
u
k
mebyeparkeys
d
Virtual number keys are provided so that the keys of a number keypad can be used for certain
applications. The virtual number keys are recognizable on the keyboard by the numbers and
symbols printed in the upper right corner of each key. If you have switched on the virtual number
keys, you can output the characters shown on the upper right of the keys.
The key assignment shown below may be different from the
keyboard layout of your device.
&
*
/
7
9
8
4
5
6
*
:
;
1
-
3
2
<
>
?
/
+
0
Num Lk
Num Lk
(bilingual
) key is active
1
= Character valid when the
Num Lk/Num
(bilingual
2
= Character valid when the
keyboard:
Num Lk/Num
keyboard:
) key is not active
Further information about the status indicators can be found in chapter "Status indicators", Page 24.
Country and keyboard settings
►
Make the country and keyboard settings as described in the documentation for your operating
system.
Fujitsu
47
Working with the notebook
Webcam
Webcam
Depending on the software used, you can use your webcam to take pictures,
record video clips or take part in web chats.
•
•
The picture quality depends on the lighting conditions and the software being used.
You can only operate the webcam with a particular application (e.g. an Internet telephony
program or a video conferencing program which supports a webcam).
•
•
When using the webcam, the notebook base must not wobble.
The webcam automatically adjusts itself to the current light level. For this reason
the LCD display may flicker while the light level is adjusted.
Further information on use of the webcam and additional settings for your webcam
can be found in the help function of the program using the webcam.
48
Fujitsu
Working with the notebook
Rechargeable battery
SRBaetrctvehicra
y
e
rgliefe
a
,
b
b
laet
b
te ttery
a
r
y
During mobile use, the notebook runs on its built-in battery. You can increase the
service life of the battery by caring for the battery properly. The average battery
service life is around 800 charge/discharge cycles.
You can extend the battery service life by taking advantage of the available energy saving functions.
Charging, caring for and maintaining the battery
Battery
The notebook battery can only be charged if the ambient temperature is between
5°C / 41°F and a maximum of 35°C / 95°F.
You can charge the battery by connecting the notebook to the AC adapter
Be aware that the battery will not charge when the battery charge level is between
90% and 100%. If the battery charge level is less than 90% and the AC adapter
is connected, the battery charges up to 100%.
If the battery is running low, an alert is triggered. If you do not connect the AC adapter within
five minutes after the alert tone, your notebook will automatically switch off.
Monitoring the battery state of charge
Bba
a
t
t
t
t
e
errychargemeter
y
Windows also has a "Battery charge meter" in the taskbar for monitoring the
battery capacity. When you place the mouse pointer on the battery symbol, the
system displays the state of charge of the battery.
Battery storage
BSCaehtlaft-erdgriyescahpaarg
c
e
it bbaattteteryry
,
y
,
The battery should be stored in a dry environment at a temperature between 0°C / 32°F and
30°C / 86°F. The lower the storage temperature, the lower the rate of self-discharge.
If you will be storing a battery for a longer period (more than two months),
the battery charge level should be approx. 30%. To prevent exhaustive
discharge which would permanently damage the battery, check the level
of charge of the battery at regular intervals.
To be able to make use of the optimum capacity of the battery, you should allow
the battery to fully discharge and then recharge it.
If you do not intend to use a battery for long periods of time, remove it
from the notebook. Never store batteries in the unit!
Fujitsu
49
Working with the notebook
Removing and installing the battery
Only use batteries approved by Fujitsu for your notebook.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for long periods in the discharged state. This
can make it impossible to recharge.
Removing a battery
Remove the power plug from the power outlet!
►
If the notebook is connected to a USB Type-CTM dock, release the USB cable
(USB Type-CTM) to disconnect the connection.
You can replace the device’s battery without having to switch the device off
first. The device has a built-in bridge battery for this purpose. If the battery is
unlocked while the device is in operating mode, Sleep Mode will automatically
be activated. Before removing the battery, please check the battery replacement
►
►
►
Close the LCD screen.
Remove all the cables from the device.
Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
1
3
2
►
Slide the Battery Lock slider switch in the direction of the arrow (1) and hold it in place.
50
Fujitsu
Working with the notebook
►
Slide the Battery Lock slider switch in direction of the arrow (2).
As soon as the battery is unlocked, the battery replacement status indicator (3) lights up and
ꢀ
The status indicator only lights up if the device is switched on during battery replacement.
If the device is not ready for battery replacement and the battery is replaced
nonetheless, the device will switch itself off. Any data not saved may be lost.
4
►
Remove the battery from the battery compartment (4).
Fujitsu
51
Working with the notebook
Installing a battery
1
2
3
2
►
►
Insert the battery in the battery compartment (1).
Slide the battery lock slider switch in the direction of the arrow (2).
The battery is secured. The battery replacement status indicator (3) goes out.
Turn the notebook the right way up again and place it on a flat surface.
Reconnect the cables that were previously disconnected.
ꢀ
►
►
52
Fujitsu
Working with the notebook
Using the energy saving functions
EBnaettergry
The notebook uses less power when the available energy-saving functions are used. You will
then be able to work longer when using the battery before having to recharge it.
ECO
The
key activates the Function Manager which maximizes your LIFEBOOK’s
environmentally friendly attributes.
The energy efficiency is increased and environmental pollution is reduced.
By choosing the best power options, you can make significant savings and
at the same time help protect the environment.
When you fold down and close the LCD screen, depending on the setting in Windows,
the notebook automatically enters a power saving mode.
The recommended settings for the Windows energy saving functions are predefined as "Fujitsu
Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there.
►
Set the energy saving functions in your Control Panel.
If you need further information about an option, you can get help with most
F1
settings by pressing
to open the Microsoft Help.
When the notebook is in energy saving mode, the following must be remembered:
During energy saving mode, open data is held in main memory or
in a swap file on the hard disk.
Never switch the notebook off while it is in an energy saving mode. If the built-in battery
is nearly flat, close all open files and do not go into energy saving mode.
If you do not intend to use your notebook for a long period of time:
►
►
Exit energy saving mode if necessary by moving the mouse, making an entry at the keyboard
or by switching on the notebook.
Close all opened programs and completely shut down the notebook.
Fujitsu
53
Working with the notebook
Memory cards
Slot
Your notebook is equipped with an integrated memory card reader.
Follow the manufacturer’s instructions when handling the memory cards.
Memorycard
Supported formats
Your notebook supports the following formats:
•
•
•
Secure Digital (SDTM Card)
SDHC
SDXC
Inserting the memory card
►
Gently push the memory card into the slot
until you feel it click into place. The label
area must be facing upward. Do not apply
excessive force, as otherwise the delicate
contact surfaces could be damaged.
Memorycard
Depending on the particular type
used, the memory card may protrude
slightly from the slot.
ꢀ
54
Fujitsu
Working with the notebook
Removing the memory card
Memorycard
To avoid any loss of data, always follow the correct procedure for removing the
card (see the documentation for your operating system).
►
On devices with card locking: Press
on the memory card (1).
Memorycard
The memory card is released and
can now be removed.
ꢀ
►
Pull the memory card out of the slot (2).
1
2
Speaker and microphone
MSVopicleur
a
omkp
e
h
rc
o
o
n
ntrol
e
You can find information about the exact position of speakers and microphones
and also enabling/disabling the speakers using keys.
If you attach an external microphone, the built-in microphone is disabled.
When you connect headphones or external speakers, the built-in speakers are disabled.
You can find information on connecting headphones and a microphone in
Fujitsu
55
Working with the notebook
Optional wireless LAN / Bluetooth wireless
components
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Depending on the system configuration ordered, your system will be
equipped with wireless LAN and Bluetooth.
Switching the wireless components on and off
F5
to switch the wireless components on and off.
►
Press the key
WBluiretloeossthLAN
The wireless component indicator will illuminate when one or more wireless
components are switched on.
ꢀ
The Bluetooth module and the wireless LAN transmission unit (antenna) will all
be switched off when you switch off the wireless components.
Pay attention to the additional safety notes for devices with wireless components
provided in the "Safety/Regulations" manual.
Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.
Configuring WLAN access
•
Requirement: A WLAN is available and you have the necessary access data to hand.
Information on configuring WLAN access can be found in the
documentation for your operating system.
Further information on WLAN and Bluetooth
For further information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manual.
56
Fujitsu
Working with the notebook
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
►
Connect the network cable to the LAN
port of the notebook (1).
►
Connect the network cable to your
network connection (2).
1
2
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
Fujitsu
57
Working with the notebook
Your USB Type-C dock (optional)
Your dock is a device that helps you to quickly connect your notebook to your
peripheral devices, such as a monitor, printer, etc.
The features offered by the dock include standard ports for monitor, audio and
other USB devices, such as mouse and keyboard.
You need only connect the notebook to the dock in order to work with your peripheral devices.
Ports on the dock
dP
o
o
crtk
s
8
7
2
6
5
4
1
3
2
8
9
10
1
2
3
4
5
6
7
= Combined headphones/microphone port
= USB 3.0 port (USB Type-A)
= VGA monitor port
= HDMI
8
= ON/OFF switch with power-on indicator
= DC input connector (DC IN)
9
10 = USB 3.1 Gen 1 port for data connection
and power supply for the notebook
(USB Type-C)
= Display Port
= LAN port
= USB 3.1 Gen 1 port for data connection
only (USB Type-C)
58
Fujitsu
Working with the notebook
Setting up the dock
Select a suitable location for the dock before setting it up. In doing
so, please follow these instructions:
•
•
Never place the dock on a soft surface (e.g. carpeting, upholstered furniture, bed). This
can block the air vents of the notebook and cause overheating and damage.
Place the dock on a stable, flat and anti-slip surface. Please note that the
rubber feet may mark certain types of surfaces.
•
•
Never place the dock and the mains adapter on a heat-sensitive surface.
Do not expose the dock to extreme environmental conditions.
Protect the dock from dust, humidity and heat.
Connecting the AC adapter to the dock
►
►
►
Connect the AC cable to the AC adapter (1).
Plug the AC cable into the power outlet (2).
Connect the AC adapter cable to the DC
jack (DC IN) of the dock (3).
3
2
1
When the notebook is connected to a dock, the operating system creates a
hardware profile for the "Docked" mode. In this profile, for example, the monitor
which was last used for output is saved as a setting. This profile will be loaded
as soon as the notebook is connected to a dock of the same type.
Fujitsu
59
Working with the notebook
Connecting the notebook to the dock
►
Disconnect the AC adapter cable from the DC jack (DC IN) of the notebook.
1
2
►
►
Connect one end of the USB cable (USB Type-C) to the USB 3.0 port with
charging function (USB Type-C) on the notebook (1).
Connect the other end of the USB cable (USB Type-C) to the USB 3.0 port for data
connection and power supply (USB Type-C) on the dock (2).
60
Fujitsu
Working with the notebook
Switching on the notebook via the dock
►
Press the ON/OFF switch on the dock to switch on the notebook.
Switching off notebook via dock
►
Close all applications and then shut down your operating system (please
refer to the manual for the operating system).
If the notebook cannot be shut down properly, press the ON/OFF switch on
the dock for approx. four seconds. The notebook will switch off. However,
any unsaved data may be lost in the process.
Disconnecting the notebook from the dock
►
Disconnect the supplied USB cable (USB Type-C) from the USB 3.0 port
(USB Type-C) on the notebook.
Fujitsu
61
Security functions
Security functions
Securityfunctions
Your notebook has a variety of security functions that you can use to protect your
system and your personal data from unauthorized access.
This chapter explains how to use these functions, and what the benefits are.
Please remember that in some cases, for example, forgetting your password,
you may be locked out of the system and unable to access your data.
Therefore, please note the following information:
•
Make regular backups to external optical disks such as external hard
drives, CDs, DVDs or Blu-ray Discs.
•
Some security functions need you to choose passwords. Make a note
of the passwords and keep them in a safe place.
If you forget your passwords you will need to contact our Service Desk.
Deletion or resetting of passwords are not covered by your warranty
and a charge will be made for assistance.
62
Fujitsu
Security functions
Brief overview of the security functions
Detailed information about the security equipment of your system can be found
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD
Security function
Type of protection
Preparation
Security Lock
Mechanical
Fit and lock the Kensington
Lock Cable (accessory).
Fingerprint sensor
Biometric
Install the supplied software.
(configuration dependent)
Palm vein sensor (configuration Biometric
dependent)
Install the supplied software.
BIOS password protection
Password protection for
the BIOS Setup, operating
system and hard disk with
Specify at least one supervisor
password in the BIOS Setup
and activate the password
supervisor and user password. protection for the operating
The passwords consist of a system and hard disk as
maximum of eight alphanumeric desired.
characters.
Boot from Removable Media
Owner Information
Prevents unauthorized booting In the BIOS Setup, go to the
of an operating system from
Security menu and edit the Boot
external media (e.g. USB stick, from Removable Media option.
USB CD-ROM drive, etc.).
Display service desk or owner In the BIOS Setup, go to the
information during the boot
Security menu and edit the
process.
Owner Information option.
Smart Card reader
PIN and SmartCard protection To use the SmartCard reader
(configuration dependent)
for the operating system
functions, install suitable
software.
Trusted Platform Module
(configuration dependent)
Identification and authentication Define a supervisor password
of the notebook
in the BIOS Setup and enable
the TPM (Security Chip).
Fujitsu
63
Security functions
Configuring the fingerprint sensor
(configuration dependent)
Fingerprintsensor
The fingerprint sensor can record the image of a fingerprint. With additional fingerprint
software, this image can be processed and used instead of a password.
1
►
Install the fingerprint software to be able to use the fingerprint sensor (1).
64
Fujitsu
Security functions
Configuring the palm vein sensor (configuration
dependent)
Palmveinsensor
The palm vein sensor can record the image of the veins on the palm of your hand. This image
is evaluated with additional software and can be used in place of a password.
►
Install the software to use the palm
vein sensor (1).
1
You can obtain further information on the palm vein sensor in the
"appendix: Miscellaneous Information".
The palm vein sensor is not supported on Windows® 10 S configurations.
Using the Security Lock
Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You
can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook
from theft. The Kensington Lock Cable is available as an accessory.
Fujitsu recommends the use of a combination lock.
►
Fit the Kensington Lock Cable to the
mechanism on your notebook.
KUMAens
e
nitcni-s
h
gtihantehngfe
i
tc
o
ps
a
n
erl
o
Lcs
t
uoe
e
rc
c
iku
t
y
i
Cr
o
ilotnayble
c
k
Fujitsu
65
Security functions
Configuring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Setup
Utility, please proceed as follows to increase data security:
Make a note of the passwords and keep them in a safe place. If you forget your
supervisor password you will not be able to access your notebook. Passwords are
not covered by your warranty and a charge will be made for assistance.
Passwordprotection
Your password can be up to 32 characters long and can contain letters, numbers and
special characters. A distinction is made between upper and lower case.
When using special characters, please note that these are dependent on
the country-specific variant of the keyboard used.
Protecting BIOS Setup Utility (supervisor password
and user password)
If you have opened these operating instructions on the screen, we recommend
that you print them out. You cannot call up the instructions on the screen
while you are setting up the password.
BIOSSetupUtility
The supervisor password and the user password both prevent unauthorized use of the BIOS
Setup Utility. The supervisor password allows you to access all of the functions of the BIOS Setup
Utility, while the user password will only give you access to some of the functions. You can
only set up a user password if a supervisor password has already been assigned.
Calling and using the BIOS Setup Utility is described in the chapter
Assigning the supervisor and user passwords
►
►
Start the BIOS Setup Utility and go to the Security menu.
Select the Set Supervisor Password field and press the Enter key.
With Enter new Password: you are asked to enter a password.
Enter the password and press the Enter key.
ꢀ
►
Confirm new Password requires you to confirm the password.
Enter the password again and press the Enter key.
ꢀ
►
Changes have been saved is displayed as a confirmation that the new password has been saved.
ꢀ
►
To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
In the Exit menu, select the option Save Changes & Exit.
Select Yes and press the Enter key.
ꢀ
►
►
PSUausspeserpwrvaoisrsdo
wr
pardssword
o
The notebook is then rebooted and the new password comes into effect. It will now be necessary
to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please
note that the user password only provides access to a few of the BIOS settings.
ꢀ
66
Fujitsu
Security functions
Changing the supervisor password or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
PSUausspeserpwrva
o
i
s
srsdo
w
rpordssword
a
►
►
Start the BIOS Setup Utility and go to the Security menu.
When changing the password, proceed exactly as when assigning a password.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PSUausspeserpwrva
o
i
s
srsdo
w
rpordssword
a
►
►
ꢀ
Start the BIOS Setup Utility and go to the Security menu.
Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
Enter New Password will appear and you will be requested to enter a new password.
►
►
►
ꢀ
Press the Enter key twice at this request.
In the Exit menu, select the option Save Changes & Exit.
Select Yes and press the Enter key.
The notebook will now reboot with the password removed.
With the supervisor password, you simultaneously deactivate the user password.
Password protection for booting the operating system
With the supervisor password you have set in the BIOS Setup Utility (see
also prevent booting of the operating system.
Operatingsystem
Activating system protection
►
►
►
►
ꢀ
Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
Select the Password on Boot option and press the Enter key.
Select the option you require (Disabled, First Boot or Every Boot) and press the enter key
Select the Save Changes & Exit option under Exit.
The notebook will reboot. You will be prompted to enter your password (the supervisor password).
Deactivating system protection
►
►
►
Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
Select the Password on Boot option and press the Enter key.
Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
Select the Save Changes & Exit option under Exit.
ꢀ
►
The notebook will reboot. The system is no longer password-protected.
ꢀ
Fujitsu
67
Security functions
Password protection for the hard disk
If a supervisor password was set, an additional password for the hard disk
can be set in the Hard Disk Security menu.
The hard disk is protected by this password. Data on this hard disk can then only be
read in another system if the correct password is entered.
Smart Card reader (configuration-dependent)
Securityfunctions
Smart Cards are not supplied as standard equipment. You can use all Smart Cards that comply with
the ISO standard 7816-1, -2 or -3. These Smart Cards are available from various manufacturers.
With the appropriate software you can use your Smart Card as an alternative to password
protection, but also as a digital signature, for encrypting your e-mails or for home banking.
We recommend that you always use two Smart Cards. Always keep one of the Smart Cards
in a safe place if you are carrying the other Smart Card with you.
Inserting the Smart Card
Do not use force when inserting and removing the Smart Card.
Make sure that foreign objects do not fall into the Smart Card reader.
►
Slide the Smart Card into the Smart
Card reader with the chip facing
upwards and to the front.
68
Fujitsu
Security functions
Trusted Platform Module - TPM
TrPuMstedPlatformModule
To use the TPM, you must enable the TPM in the BIOS-Setup before the software is
installed. The requirement for this is that you have assigned at least the supervisor
Enabling TPM
•
Call BIOS Setup and select the Security menu.
►
►
►
ꢀ
Mark the TPM Security Chip Setting field and press the Enter key.
Select the entry Enabled to enable the TPM
Once you have enabled the TPM the Clear Security Chip menu item appears.
You can clear the holder in the TPM using Clear Security Chip. With Enabled,
all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by applications are deleted.
Take note that you can then no longer access the data you have
encrypted on the holder-based keys!
►
►
ꢀ
From the Exit menu, select the option Exit Saving Changes.
Press the Enter key and select Yes.
The notebook restarts and the TPM is switched on after the reboot.
Disabling TPM
•
Call BIOS Setup and select the Security menu.
►
►
►
►
►
ꢀ
Mark the TPM Security Chip Setting field and press the Enter key.
Select the entry Disabled to disable the TPM.
In the Exit menu, select the option Exit Saving Changes.
Press the Enter key and select Yes.
The notebook will now reboot with TPM deactivated.
Fujitsu
69
Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 14 chapter before connecting or disconnecting
any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
HDMI port
HDMIport
The HDMI port on your notebook or the optional dock can be used to connect an external
amplifier, LCD TV or a plasma TV with an HDMI connection.
►
Connect the data cable to the
external device.
►
Connect the data cable to the HDMI port on
the notebook or on the optional dock.
70
Fujitsu
Connecting external devices
Connecting an external monitor
An analogue monitor is connected to the analogue external monitor port (VGA), a digital monitor
to the Display Port on the optional dock. Display output is limited to a maximum of two monitors
VMGonAisto
o
r
c
p
k
ort
e
Analog external monitor port (VGA) (on
notebook or on optional dock)
Digital Display Port (on the optional dock)
►
►
►
Switch off the notebook and the external monitor.
Plug the data cable of the external monitor into the monitor port.
First switch on the external monitor and then the notebook.
You can also switch back and forth between the external monitor and the LCD
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
Fujitsu
71
Connecting external devices
Connecting USB devices
USBports
On the USB ports you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbps.
USB 2.0 has a data transfer rate of up to 480 Mbps.
USB 3.0 has a data transfer rate of up to 5 Gbps.
USB 3.1 Gen 1 has a data transfer rate of up to 5 Gbps.
USB 3.1 Gen 2 has a data transfer rate of up to 10 Gbps.
Additional information can be found in the documentation for the USB devices.
►
►
Connect the data cable to the
external device.
Connect the data cable to a USB
port of the notebook.
Device drivers
USB devices will be automatically recognized and installed by your operating system.
72
Fujitsu
Connecting external devices
USB port with charging function (USB Type-C)
USBportwithchargingfunction(USBType-C)
At this USB port, you can charge a connected USB device or operate devices without an
You can also charge a connected USB device or operate devices without an additional power supply.
This is also possible with the notebook switched off, if the USB Type-C Power Delivery
on System-Off function is activated in the Advanced - Miscellaneous Configurations menu
of the BIOS Setup Utility. Calling up and using the BIOS Setup Utility is described
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
Additional information can be found in the documentation for the USB devices.
►
►
Connect the data cable to the
external device.
+
Connect the data cable to a USB port
(USB Type-C) on the notebook.
Fujitsu
73
Connecting external devices
USB port with charging function (Anytime USB charge)
You can use this USB port to charge or supply power to a USB device (e.g. to charge
a PDA or a mobile phone or to connect a USB lamp).
This is possible even when the notebook is switched off, if the Anytime USB Charge function is
enabled in the Advanced/Miscellaneous Configurations menu of the BIOS Setup Utility. If the setting
AC is selected, the device will only be charged when the AC adapter is connected.
USBchargingfunction
It is recommended that the notebook be operated with the AC adapter connected
whenever the USB port with charging function is in use, as this function will drain
the battery more quickly if an external USB device is being charged.
The AC adapter must already be connected when the notebook is switched
off, as otherwise the USB charging function will be disabled and the
connected USB devices will not be charged.
Some USB devices (e.g. mobile telephony) require a driver in order to utilize the USB
charging function. In this case the USB charging function will not work when the
notebook is switched off, as no drivers are active when the notebook is switched off.
►
►
Connect the data cable to the
external device.
Connect the data cable to a USB port
(Anytime USB charge) of the notebook.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
►
►
►
ꢀ
With the left mouse button, click on the symbol in the taskbar for safe removal of hardware.
Select the device you wish to shut down and remove.
Press the "Enter" key.
Wait for the dialog box which tells you that it is now safe to remove the device.
74
Fujitsu
Connecting external devices
Headphones/microphone/Line-In/Line-Out/
headset-combi port
ACuodnin
o
e
c
c
otnin
n
g
e
ah
c
uetidaoidnops
d
h
e
o
v
nicess
e
Using the headphones/microphone/Line-In/Line-Out/headset-combi port, you can connect a
headset, headphones, a microphone or external speakers to your notebook.
Windows 10 S configurations: You can connect a headphone. However,
microphone, Line-In and Line-Out are not supported.
►
►
ꢀ
Connect the audio cable to the
external device.
Connect the audio cable to the headphone
port of the notebook.
The internal speakers are disabled.
If you purchase a cable from a retailer, please note the following information:
The headphones/microphone/Line-In/Line-Out/headset-combi port on
your notebook is a "3.5 mm jack socket".
If you want to connect headphones or speakers you will need a "3.5 mm jack plug".
Fujitsu
75
Removing and installing components during servicing
Removing and installing components
during servicing
Only qualified technicians should repair your notebook. Unauthorized
opening or incorrect repair may greatly endanger the user (electric shock,
fire risk) and will invalidate your warranty.
Incaseofservice
Components
You may remove and install the components described in this chapter yourself
after consulting the Hotline/Service Desk.
If you remove and install components without consulting the Hotline/Service
Desk, then the warranty of your notebook will be voided.
Notes on installing and removing boards
and components
•
•
•
•
Switch off your notebook and remove the AC plug from the power outlet.
Always remove the battery.
Take care when you use the locking mechanisms for the battery and any other component.
Never use sharp objects such as screwdrivers, scissors or knives as a lever to remove covers.
IBE
n
oSs
a
tDr
r
u
d
ctions
s
Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.
When handling boards fitted with ESDs, you must always observe the following
points:
•
You must always discharge static build up (e.g. by touching a grounded
object) before working with boards.
•
•
The equipment and tools you use must be free of static charge.
Remove the AC plug from the power outlet before inserting or removing
boards.
•
•
Always hold boards by their edges.
Never touch connector pins or conductors on the board.
76
Fujitsu
Removing and installing components during servicing
Preparing to remove components
If you are going to remove or change system components, prepare for the removal as follows:
Remove the AC plug from the power outlet!
►
Switch the device off.
The device must not be in energy saving mode.
►
►
►
Close the LCD screen.
Remove all the cables from the device.
Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
►
Fujitsu
77
Removing and installing components during servicing
Removing and installing memory expansion
MSyaesimtn
e
mo
m
rey
e
mrxepo
m
ardyonu
v
sleaion
l
If you are asked by the Hotline/Service Desk to remove or install a memory
expansion module yourself, proceed as follows:
During installation/removal of memory modules, the battery must remain
removed from the notebook and the notebook must not be connected to the
Only use memory modules that have been approved for use in your
Never use force when installing or removing a memory module.
Make sure that no foreign objects fall into the memory upgrade compartment.
You must open the memory upgrade compartment to remove or install a memory
module. On some devices, it is possible that opening the compartment exposes various
components. Only authorized specialists are permitted to remove or change these
components. Therefore, be sure to observe the following:
Individual components can become very hot during operation. Therefore, we
recommend that you wait one hour after switching the notebook off before removing
or installing memory modules. Otherwise, there is a risk of suffering burns!
As some components are exposed that are sensitive to static electricity, please take
Fujitsu
79
Removing and installing components during servicing
Removing a memory module
►
Remove the cover "Remove the cover", Page 78
►
Fold over the protective film in the direction of the arrow.
►
Carefully push the two mounting
clips outwards (1).
Memoryem
x
o
p
d
anlseion
u
The memory module will fold upwards (2).
ꢀ
►
3
Pull the memory module out of its slot
in the direction of the arrow (3).
2
1
1
80
Fujitsu
Removing and installing components during servicing
Installing a memory module
►
►
Insert the memory module with the contacts
and the recess (a) forward in the slot (1).
Memoryem
x
o
p
d
anlseion
u
Carefully push the memory module
downwards until you feel it click
into place (2).
2
1
a
►
►
Fold over the protective film in the direction of the arrow.
Fasten the cover again, see "Attaching the cover", Page 84
Fujitsu
81
Removing and installing components during servicing
►
►
Pull the M.2 module out of the slot on the mainboard in the direction of
the arrow (2) and remove it from the casing.
Fasten the cover again, see "Attaching the cover", Page 84
Installing the M.2 module
►
Remove the cover, see "Remove the cover", Page 78
2
2
1
►
►
Position the M.2 module in the slot on the mainboard at a slight angle,
in the direction of the arrow (1).
Secure the M.2 module in its location with the screw (2).
Fujitsu
83
Removing and installing components during servicing
Finishing component removal
After you have removed or changed the system components as required, please
prepare your device for operation again as follows:
►
►
►
Turn the notebook the right way up again and place it on a flat surface.
Reconnect the cables that were previously disconnected.
Fujitsu
85
Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BSCeIyoOstn
u
tSfi
e
p
g
Sm
u
e
srtiaeun
t
tpgit
o
i
Ushn
n
yagt
,
isrlsBidtt,eIyBwO
m
Ia
S
OrSe
S
e
Stueptu tilitiylity
U
p
U
The BIOS Setup Utility allows you to set the system functions and the hardware
configuration for the notebook.
When a notebook is delivered, the factory default settings are effective. You can change
these settings in the menus of the BIOS Setup Utility. Any changes you make take
effect as soon as you save and exit the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
Info
Displays information relating to the BIOS, processor and notebook
Advanced system settings
System
Advanced
Configuration of various hardware components, such as mouse, keyboard,
processor
Security
Boot
Password settings and security functions
Configuration of the start-up sequence
Exits the BIOS Setup Utility
Exit
Starting the BIOS Setup Utility
►
Reboot the device (switch off/on or reboot the operating system).
BIOSSetupUtility
Depending on the setting for Fast Boot in the BIOS-Setup-Utility, the following
notification may appear on the screen during start-up:
ꢀ
<F2> BIOS Setup <F12> Boot Menu
F2
►
►
Press the function key
.
If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator
or contact our customer service center.
The BIOS Setup Utility starts.
86
Fujitsu
Settings in BIOS Setup Utility
BIOS Setup Utility operation
BIOSSetupUtility
F1
Press the
key to display help about operation of the BIOS Setup Utility. The description
of the individual settings is shown in the right-hand window of the BIOS Setup Utility.
F9
With the
key you can load the default settings of the BIOS Setup Utility.
←
→
►
Use the cursor keys
or
to select the menu you wish to access to make changes.
The menu is displayed on the screen.
Select the option you want to change with the cursor keys
Press the "Enter" key.
ꢀ
↑
↓
►
►
►
►
or
.
ESC
Press the
key to exit the selected menu.
For future reference, make a note of the changes you have made (for example, in this manual).
Fujitsu
87
Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility
►
To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The notebook is rebooted and the new settings come into effect.
ꢀ
Exit Discarding Changes - Reject changes and
exit BIOS Setup Utility
►
To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
ꢀ
Load Setup Defaults – load default values
►
To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes - Discard Changes without
exiting BIOS Setup Utility
►
To discard the changes you have made, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective.
You can now make additional settings in the BIOS Setup Utility.
ꢀ
►
If you want to exit the BIOS Setup Utility with these settings, select Exit Saving Changes and Yes.
Save Changes - save changes without exiting
the BIOS Setup Utility
►
To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional settings in the BIOS Setup Utility.
If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
ꢀ
►
Save changes and power off
►
To save the changes and switch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
ꢀ
88
Fujitsu
Troubleshooting and tips
Troubleshooting and tips
TFPirar
p
o
u
s
u
b
ltblele
m
ssh
o
o
l
ovtiin
ng
g
If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:
►
Make a note of the steps and the circumstances that led to the fault. Also
make a note of any error messages displayed.
►
►
Switch the notebook off.
Please contact the Hotline/Service Desk.
You can contact Fujitsu Service and Support in the following ways:
•
•
Toll free phone: 1-800-8Fujitsu (1-800-838-5487)
Before you place the call, have the following information ready so that the customer
support representative can provide you with the fastest possible solution:
•
•
•
The model name and serial number of the notebook. The serial number is
located on a sticker on the underside of the notebook.
Notes with the messages that appeared on the screen and
information on acoustic signals.
Any changes you have made to the hardware or software since
receiving the notebook.
•
•
•
Any changes you have made to the BIOS Setup settings after receiving the notebook.
Your system configuration and all peripheral devices connected to your system.
Your sales contract.
Our notebooks have been designed primarily with mobile applications in mind.
This means that considerable effort has been made to optimize components and
equipment in terms of weight, space and energy requirements. Depending on the
particular configuration you have purchased, it is possible that functionality may be
slightly reduced compared to a desktop PC if you are running processor-intensive
gaming software, e.g. games with intensive 3D graphics. Updating your hardware with
drivers which have not been approved by Fujitsu may result in performance losses,
data losses or malfunction of the equipment. A list of approved drivers and current
BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
►
►
Note the ID number of your device. The ID number is found on the type rating
plate on the back or underside of the casing.
For further clarification of the problem, contact the Fujitsu Service Desk. When you do
this, please have ready the ID number and serial number of your system.
In the event you need to recover your system
In the event you need to restore your original Factory Image, please refer to
the appendix of this Operating Manual.
Fujitsu
89
Troubleshooting and tips
The notebook’s date or time is incorrect
ITWDniamcrotenrnr
g
e
o
d
c
t
t
act otoiemr/rteimctte
t
Cause
Troubleshooting
Time and date are incorrect.
►
With the BIOS-Setup-Utility, you can set the
date and time in the Main menu.
Date and time are still set incorrectly after
switching on the notebook.
►
Please contact your sales outlet or our
hotline/service desk.
Battery indicator does not illuminate
Cause
Troubleshooting
The battery is not installed correctly.
►
►
Switch the notebook off.
Check whether the battery is installed
correctly in its compartment.
►
►
Switch the notebook on.
Charge the battery.
The battery is discharged.
or
►
►
Install a charged battery.
or
Connect the notebook to a AC outlet
using the AC adapter.
When certain characters are entered on the
keyboard, only numerals are written
Cause
Troubleshooting
Num
button.
The virtual number keys of your device are
activated, see "Virtual number keys", Page 47
►
Press the
The notebook’s LCD screen remains blank
LBClaDnksLcrCDensceen
Cause
Troubleshooting
Screen is switched off.
►
►
Press a key or touch the Clickpad.
External monitor or television set connected.
Press the key for changing over the screen
90
Fujitsu
Troubleshooting and tips
The LCD screen of the notebook is difficult to read
LCDscreen
Cause
Troubleshooting
Reflected glare
►
►
Turn the notebook or alter the tilt of the LCD
screen.
Increase the brightness of the screen.
The external monitor remains blank
Monitor
Cause
Troubleshooting
Monitor is switched off.
►
►
Switch the external monitor on.
Press any key to continue.
Power saving has been activated (monitor is
blank).
Brightness is set to dark.
►
►
Adjust the brightness of the monitor.
Screen output is set to the notebook’s LCD
screen
Press the key for changing over the screen
The external monitor’s AC cable or data cable is
not connected properly.
►
►
Switch off the external monitor and the
notebook.
Check whether the AC cable is plugged
properly into the external monitor and into
the power outlet.
►
►
Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a connector).
Switch on the external monitor and the
notebook.
The external monitor is blank or the image is unstable
Monitor
Cause
Troubleshooting
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
►
Terminate the application program under
Alt F4
. If the
error persists after terminating the program,
use the key for switching the screen output
to the LCD screen of the notebook.
Windows by pressing
+
Change the following setting:
►
►
Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
Fujitsu
91
Troubleshooting and tips
The cursor does not correctly follow the
stylus movements
Cause
Troubleshooting
Stylus incorrectly calibrated.
►
Calibrate the stylus as shown under
Hardware and Sound / Tablet PC Settings
in the Control Panel, see "Adjusting the
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
►
If your device is one which can only be
operated using the stylus, install the driver
for the standard model.
or
►
If your device is one which can be
operated using the stylus and by finger,
install the driver for the "Dual Digitizer"
model.
The stylus is in power saving mode.
►
►
Press gently on the tip of the stylus to
reactivate the stylus.
The stylus battery is completely discharged.
Carefully insert the stylus in its slot on the
notebook to charge the stylus battery.
The notebook does not start after switching it on
Nobok
Cause
Troubleshooting
The battery is not installed correctly.
►
Check whether the battery is installed
correctly in its compartment.
►
►
Switch the notebook on.
Charge the battery.
The battery is dead.
or
►
►
Insert a charged battery.
or
►
►
Connect the AC adapter to the notebook.
The AC adapter is not connected properly.
Check whether the AC adapter is properly
connected to the notebook.
Switch the notebook on.
92
Fujitsu
Troubleshooting and tips
The notebook stops working
NEnodteinbgook
Cause
Troubleshooting
The notebook is in energy saving mode.
►
►
End energy saving mode.
An application program has caused the
malfunction.
Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
►
Charge the battery.
or
►
►
Insert a charged battery.
or
Connect the AC adapter to the notebook.
The printer does not print
Prinedosntrint
Cause
Troubleshooting
The printer is not switched on.
►
►
►
Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly.
Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
Check whether the correct printer driver is
loaded (refer to the printer documentation).
The wireless connection to a network does not work
Thewirlessconnectiontoanetworkdoesnotwork
Cause
Troubleshooting
The wireless component is switched off.
►
Switch the wireless component on (see
The wireless component is switched on. Despite
this, the wireless connection to a network does
not work.
►
►
Check whether the wireless connection is
enabled by the software.
Further information on using the wireless
component can be found in the help files.
Fujitsu
93
Troubleshooting and tips
The battery discharges too quickly
Battery
Cause
Troubleshooting
The battery is either too hot or too cold. In this
case the battery indicator flashes.
►
►
Move the notebook so that its temperature
returns to within the normal range.
If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace the battery if necessary.
You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
►
►
Use the AC adapter whenever possible.
The maximum brightness may have been set
for the screen.
Set the screen slightly darker with the key
for Decreasing the screen brightness in order to
reduce the amount of power being drawn.
Smart Card reader is not recognized
Cause
Troubleshooting
Smart Card inserted incorrectly.
►
Make sure you have inserted your Smart
Card into the Smart Card reader with
the chip facing upwards / downwards
(device-dependent).
►
Check whether the Smart Card you are
using is supported. Your Smart Card must
comply with the ISO standard 7816-1, -2,
-3 and -4.
Smart Card PIN forgotten
Cause
Troubleshooting
PIN forgotten
►
If you are working in a network, contact your
system administrator, who can unlock your
notebook with a Supervisor PIN.
Smart Card lost
Cause
Troubleshooting
Smart Card lost.
►
If you are working in a network, contact your
system administrator, who can boot your
notebook with a Supervisor Smart Card.
94
Fujitsu
Troubleshooting and tips
User and/or supervisor SmartCard lost
Cause
Troubleshooting
User and/or supervisor SmartCard lost
►
If you have lost your user SmartCard, you
can continue to work with the supervisor
SmartCard.
►
If you have lost the supervisor SmartCard,
you can also continue working, but you no
longer have all rights and cannot initialize
another supervisor SmartCard.
Acoustic warning
croourstic warnings
Cause
Troubleshooting
► Charge the battery.
A beep sounds every few seconds.
The battery is almost dead.
Error messages on the screen
Errorsmessagesonthescreen
This section describes the error messages generated by the BIOS Setup. Error messages displayed
by the operating system or programs are described in the documentation for these programs.
If the error message appears repeatedly despite troubleshooting measures,
contact the place of purchase or our customer service center.
Error message/cause
Troubleshooting
CMOS Battery Bad
►
Contact your sales outlet or our customer
service center.
If the error message occurs repeatedly, the
back-up battery in the notebook is dead.
System CMOS checksum bad - Default configuration
used
►
►
►
Switch the notebook off.
Switch the notebook on.
F2
The system configuration information is
incorrect.
Press the function key
to access the
BIOS Setup.
►
►
►
►
In the BIOS Setup, select the Exit menu.
Select the entry Load Setup Defaults.
Select OK and press the Enter key.
Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz
Check whether the additional memory
module has been inserted correctly.
When testing the extended memory. an error
has resulted at the address xxxx.
Failure Fixed Disk n
►
Start the BIOS Setup (Primary Master
submenu) and select the correct settings.
The settings of the hard disk drive are incorrect.
Fujitsu
95
Troubleshooting and tips
Error message/cause
Troubleshooting
Keyboard controller error
►
Switch off the notebook with the ON/OFF
switch.
►
Wait 3 - 5 seconds and switch on the
notebook again.
Keyboard error
If you use an external keyboard:
►
Check the connection and reboot the
notebook.
nn Stuck key
►
►
Make sure that no key is pressed.
Operating system not found
Check in the BIOS Setup whether your hard
disk has been set correctly.
►
►
►
Make sure that the operating system is
installed on the corresponding drive.
F1
Press <F1> to resume, <F2> to SETUP
Press the
function key to start the
operating system.
This error message appears if an error occurs
during the self-test before starting the operating
system.
F2
Press the function key
to access the
BIOS Setup.
F1
function key when prompted
Previous boot incomplete - Default configuration
used Default values have been set for certain
settings because of an error which occurred in
the previous system boot. Check the settings in
the BIOS Setup.
►
Press the
to do so.
Real time clock error
►
►
►
►
►
Contact your sales outlet or our customer
service center.
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
Contact your sales outlet or our customer
service center.
System battery is dead - Replace and run SETUP
System cache error - Cache disabled
System timer error
Contact your sales outlet or our customer
service center.
Contact your sales outlet or our customer
service center.
Contact your sales outlet or our customer
service center.
96
Fujitsu
Technical data
Technical data
Notebook
General
Processor
7th Generation Intel® Core™ with ULT processors
Intel® Core™ i7-7600U processor (4 MB cache,
up to 3.9 GHz)
Intel® Core™ i7-7500U processor (4 MB cache,
up to 3.5 GHz)
Intel® Core™ i5-7300U processor (3 MB cache,
up to 3.5 GHz)
Intel® Core™ i5-7200U processor (3 MB cache,
up to 3.1 GHz)
Intel® Core™ i3-7100U processor (3 MB cache,
up to 2.4 GHz)
Intel® Celeron® 3965U processor (2MB cache,
up to 2.20 GHz)
Optional Intel® Core™ vPro™ processor
Maximum 16 GB DDR4
Main memory (SO DIMM)
1 slot for 4, 8 or 16 GB modules
Electrical data
Safety regulations complied with
Protection class
CE, cULus
III
Maximum power consumption (with the
65 W (without USB Type-C dock) / 90 W (with
notebook switched on and the battery charging): USB Type-C dock)
LCD screen
Size
31.75 cm / 12.5" TFT FHD or HD (configuration
dependent)
Resolution
HD: 1366 x 768 pixels
FHD: 1920 x 1080 pixels
16M colors
II
Pixel class
Brightness control
Technology
11 levels
Wide-View High-Bright Display with LED
background lighting
Digitizer and glass panel
•
•
Dual Digitizer / Touch and Pen support
Hardened glass
Webcam
HD (720p) with status indicator and two
microphones
Display adapter
Fujitsu
97
Technical data
Chip
Intel® HD Graphics 620
HDMI: 4096 x 2160 pixels
Maximum resolution of external monitor:
Dimensions
Width x Depth x Height
from
11.77 inch x 8.23 inch x 0.74 inch
299 x 209 x 18,8 mm
from
Weight depending on configuration
2.84 lbs
1.29 kg
Input devices
Keyboard
high-quality, splashproof and antimicrobial
keyboard with 84 keys, optional backlit
Touchpad
Touchpad cursor control pad with right and left
command button, supports: Capacitive Touch,
external USB keyboard, Wacom AES stylus and
mouse
Stylus
2 stylus buttons
Slots
Storage card slot
SmartCard slot
Ports
1 x SD Card
1 x
HDMI port
1 x
VGA port
1 x
LAN port
Socket, RJ45
USB (Universal Serial Bus)
1 x Type-C USB 3.1 Gen 1 port, 2 x Type-A USB
3.0 ports (1 x Anytime USB Charge)
Security Lock
1 x
Ambient conditions
Environment class DIN IEC 721
Mechanism class DIN IEC 721
Operating temperature
7K1
7M2
41°F .... 95 °F
5 °C .... 35 °C
5°F .... 140 °F
Transit temperature (2K2)
–15 °C .... 60 °C
Windows 10 S configurations: You can connect a headphone. However,
microphone, Line-In and Line-Out are not supported.
The data sheet for the device provides further technical data. You can find the data
98
Fujitsu
Technical data
WLAN specifications
Type of network
Intel® Dual Band Wireless-AC 8265
11a/b/g/n/11ac), Wi-Fi based*
Transfer rate
(Automatic switching) IEEE802.11 a and g: 54
Mbps max. data rate; IEEE802.11n: 300 Mbps
max. data rate, IEEE802.11ac: 867 Mbps max.
data rate
Active frequency
•
•
•
•
•
802.11n: 2.4 GHz or 5 GHz
802.11b/g: 2400~2473 MHz
802.11a: 4900~5850 MHz
802.11a: 2.4 GHz / 5 GHz
Typical operating distances**
802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.
(91 m) @ 6 Mbps
•
•
•
•
802.11ac: 40 ft. (12 m) @ 54 Mbps; 300
ft.(91 m) @ 6 Mbps
802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.
(91 m) @ 1 Mbps
802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.
(91 m) @ 1 Mbps
802.11n: Estimated double the operating
distance of 802.11g and 802.11a in their
respective frequencies
Number of channels
•
•
802.11a: 8 independent channels
802.11b/g: 11 channels, 3 non-overlapping
channels
•
802.11n: Channel bonding takes two of
the non-overlapping 20MHz channels and
combines it into one 40MHz channel. It is
actually 12 non-overlapping channels with
channel bonding and 24 without. Also it is 1
non-overlapping channel in 2.4GHz when
channel bonding is used.
•
802.11ac: 5 independent channels
Security
Encryption types: compatible with WEP, TKIP,
AES***, WPA 1.0 and WPA 2.0
Encryption key, lengths supported: 64 bits and
128 bits
Fujitsu
99
Technical data
Maximum recommended number of computers 10 units or less ****
to be connected over wireless LAN (during ad
hoc connection)
* “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the
interconnectivity of wireless LANs (Wi-Fi Alliance) was passed.
** The operating distances given above increase or decrease depending on factors such as the
number of walls, reflecting material or interference by external RF sources.
*** Network key encryption (WEP) occurs with the number of bits given above, after deduction of
the fixed length of 24 bits the user may however also set 40 or 104 bits.
**** Depending on the particular practical application, the number of computers which can be
networked is reduced if necessary.
USB Type-C dock (optional)
Electrical data
Safety regulations complied with
Ports
UL
Monitor port (analog)
HDMI port
15-pin
1 x
Display Port
1 x
Maximum resolution of an external monitor
VGA: 1920 x 1200 pixels
Display Port: 2560 x 1600 pixels
HDMI: 4096 x 2160 pixels
RJ45
LAN port
USB (Universal Serial Bus)
3 x USB 3.0 Type-A, 2 x USB 3.1 Gen 1 Type-C
3.5 mm stereo mini jack
Microphone port / Line In / Headphones port /
Line Out
Ambient conditions
Environment class DIN IEC 721
Mechanism class DIN IEC 721
Operating temperature
7K1
7M2
41 °F .... 95 °F
5 ℃ .... 35 ℃
Transit temperature
5 °F .... 140 °F
–15 °C .... 60 °C
Windows 10 S configurations: You can connect a headphone. However,
microphone, Line-In and Line-Out are not supported.
100
Fujitsu
Technical data
Rechargeable battery
For information on the batteries used in your device, please see
Rated voltage
10.8 V
Rated capacity
Rated power
45 Wh
4170 mAh
The operating time depends on the device configuration, the active
applications and the energy saving settings.
AC adapter for use with notebook and
USB Type-C dock
Only connect the 90 W AC adapter to the USB Type-C dock.
The following technical data applies to the AC adapter included in the delivery scope of
the notebook and the USB Type-C dock which is can be ordered as an option.
Primary
Rated voltage
Rated frequency
Secondary
100 V to 240 V (automatic)
50 Hz to 60 Hz (automatic)
Rated power
65 W / 90 W
19 V
Rated voltage
Max. rated current
3.42 A / 4.74 A
An additional AC adapter or AC cable can be ordered at any time.
Fujitsu
101
Manufacturer’s notes
Manufacturer’s notes
Disposal and recycling
Notes
You can find information on this subject on your notebook or on our website
Recycling your battery
Over time, the batteries that run your mobile computer will begin to hold a charge for a
shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you
may want to replace the battery with a brand new one*. If you replace it, it is important
that you dispose of the old battery properly because batteries contain materials that
could cause environmental damage if disposed of improperly.
Fujitsu is very concerned with environmental protection, and has enlisted the services of the
Rechargeable Battery Recycling Corporation (RBRC)**, a nonprofit public service organization
dedicated to protecting our environment by recycling old batteries at no cost to you.
RBRC has drop-off points at many convenient locations throughout the United States and Canada.
To find the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837.
If there are no convenient RBRC locations near you, you can also go to the EIA Consumer
Remember – protecting the environment is a cooperative effort, and you should
make every effort to protect it for current and future generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site
** RBRC is an independent third party to which Fujitsu provides funding for
battery recycling; RBRC is in no way affiliated with Fujitsu.
DOC (Industry CANADA) Notices
DOC(INDUSTRYCANADA)NOTICES
Radios and Television
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment
Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement
sur le matérial brouilleur du Canada.
102
Fujitsu
Manufacturer’s notes
UL Notice
IMPORTANT SAFETY INSTRUCTIONS
This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating
of 19 VDC, with a minimum current of 3.42A (65W). The correct output rating is indicated on the
AC adapter label. Refer to the illustration below for the correct AC adapter output polarity:
When using your notebook equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
•
Do not use this product near water for example, near a bathtub, washbowl, kitchen
sink or laundry tub, in a wet basement or near a swimming pool.
•
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a
fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
For Authorized Repair Technicians Only
CAUTION:
For continued protection against risk of fire, replace only with the
same type and rating fuse.
WARNING:
Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instruction.
Fujitsu
103
Manufacturer’s notes
ENERGY STAR Compliance
Your Fujitsu system is an ENERGY STAR qualified mobile PC. By
choosing a computer with the latest energy-saving technology, you’re
helping to preserve our environment for future generations. ENERGY
STAR is a joint program of the U.S. Environmental Protection Agency,
U.S. Department of Energy, Natural Resources Canada, and other
governments around the world helping us save money while protecting
the environment through energy efficient products and practices. With
energy costs and global warming top-of-mind for consumers, Fujitsu is
committed to offering solutions that help consumers conserve energy
and improve the quality of our environment.
Sleep mode:
You will notice that your computer is initially set so that the display turns off after 10 minutes of
user inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. When
going into Sleep mode, the computer also reduces the speed of any active Ethernet network
links. To “wake” the computer from Sleep mode, press the Suspend/Resume Button.
Energy saving benefits:
Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard
equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference
for the environment. Did you know that the average house can be responsible for twice the
greenhouse gas emissions as the average car? That’s because every time you flip on a light
switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse
gas emissions from power plants. So the more energy we can save through energy efficiency,
the more we help to reduce greenhouse gases and the risks of global warming.
To learn more about the important ENERGY STAR program, visit:"www.energystar.gov".
To read about how Fujitsu is supporting Sustainable Management along with
several other environmental activities, visit the Fujitsu Corporate Citizenship page at:
104
Fujitsu
FCC and IC Regulatory Information
FCC and IC Regulatory Information
Please note the following regulatory information related to the wireless LAN
device.
Regulatory Notes and Statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of
these emissions, however, are far much less than the electromagnetic energy emissions from wireless
devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they
operate within the guidelines found in radio frequency safety standards and recommendations. The
use of Wireless LAN devices may be restricted in some situations or environments, such as:
•
•
•
On board an airplane, or
In an explosive environment, or
In situations where the interference risk to other devices or services is
perceived or identified as harmful.
In cases in which the policy regarding use of Wireless LAN devices in specific environments is
not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain
authorization to use these devices prior to operating the equipment.
Regulatory Information/Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions
included in the user documentation provided with the product. Any changes or modifications made
to this device that are not expressly approved by the manufacturer may void the user’s authority to
operate the equipment. The manufacturer is not responsible for any radio or television interference
caused by unauthorized modification of this device, or the substitution or attachment of connecting
cables and equipment other than those specified by the manufacturer. It is the responsibility of the
user to correct any interference caused by such unauthorized modification, substitution or attachment.
The manufacturer and its authorized resellers or distributors will assume no liability for any damage
or violation of government regulations arising from failure to comply with these guidelines.
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is
restricted to indoor environments, and the antenna of this device must be integral.
105
Fujitsu
FCC and IC Regulatory Information
Federal Communications Commission and Industry
Canada statement:
This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and, (2) This device must accept any interference, including interference
that may cause undesired operation of this device.
Déclaration d’Industrie Canada
Cet appareil est conforme à la Section 15 des Règles de la FC C et à la ( aux) norme(s)
RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement
est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférence
nuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles
pouvan t causer un mauvais fonctionnement de l’appareil.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with
the instructions, it may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
4. Consult the dealer or an experienced radio/TV technician for help.
106
Fujitsu
FCC and IC Regulatory Information
FCC Radio Frequency Exposure statement
The available scientific evidence does not show that any health problems are associated with
using low power wireless devices. There is no proof, however, that these low power wireless
devices are absolutely safe. Low power wireless devices emit low levels of radio frequency
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce
health effects (by heating tissue), exposure to low-level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low-level RF exposure have
not found any biological effects. Some studies have suggested that some biological effects
might occur, but such findings have not been confirmed by additional research.
The wireless LAN radio device has been tested and found to comply with FCC radiation
exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to OET65.
The exposure standard for wireless devices employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.
This device is compliant with SAR for general population /uncontrolled exposure limits in
ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with
the measurement methods and procedures specified in OET Bulletin 65 Supplement C,
and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure
guidelines when tested with the device operating conditions.
Déclaration de la FCC/d’Industrie Canada sur
l’exposition aux radiofréquences
La norme régissant l’exposition des appareils sans fil aux radiofréquences emploie une unité
de mesure dénommée Taux d’absorption spécifique, ou TAS. La FCC et Industrie Canada ont
défini la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites
d’exposition générales de la population/non contrôlées définies par les règles C95.1-1992 de
l’ANSI/IEEE et RSS 102 d’Industrie Canada ; il a été testé en conformité avec les méthodes
et procédures de mesure spécifiées dans le supplément C du bulletin 65 de l’OET (Office
d’ingénierie et de technologie) et la règle RSS 102 d’Industrie Canada. Cet appareil a été testé
selon les directives de la FCC et d’IC concernant l’exposition aux radiofréquences et s’est révélé
conforme à ces dernières lorsqu’il a été testé en contact direct avec le corps.
Export restrictions
This product or software contains encryption code which may not be exported or transferred
from the US or Canada without an approved US Department of Commerce export license.
This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesirable operation. Modifications not expressly authorized by Fujitsu
America, Inc. may invalidate the user’s right to operate this equipment.
107
Fujitsu
FCC and IC Regulatory Information
Restrictions concernant l’exportation
Ce produit ou logiciel contient du code de chiffrement qui ne peut être exporté ou transféré du
Canada ou des États-Unis sans un permis d’exportation du département du commerce des
États-Unis. Ce matériel est conforme à la Partie 15 des règlements de la FCC, ainsi qu’à la
norme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes
: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter
toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement
de l’appareil. Toute modification n’ayant pas été expressément approuvée par la société Fujitsu
America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.
Canadian Notice
The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential
for harmful interference to co-channel mobile satellite systems.
The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725
MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.
In addition, users are cautioned to take note that high power radars are allocated as primary
users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these
radars could cause interference and/or damage to LE-LAN devices.
Avis pour le Canada
Le matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utilisé
uniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé aux
systèmes mobiles par satellite fonctionnant sur un même canal.
Un gain d’antenne de 6 dBi est autorisé (pour le matériel utilisant les bandes 5 250
- 5 350 MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformément à la limite
p.i.r.e. maximale permise afférent aux périphériques RSS-247.
En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissance
sont considérés comme des utilisateurs principaux (ce qui signifie qu’ils sont prioritaires) des
bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences
et/ou des dommages aux appareils de réseau exempts de licence.
108
Fujitsu
Appendix
Appendix
Before Using the Optional Wireless LAN
This manual describes the procedures required to properly set up and configure the optional
integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the
manual). Before using the WLAN device, read this manual carefully to ensure its correct
operation. Keep this manual in a safe place for future reference.
Wireless LAN Devices Covered by this Document
This document is applicable to systems containing the following device:
•
Intel® Dual Band Wireless-AC 8265 – 11a/b/g/n/11ac
Characteristics of the WLAN Device
•
•
The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer.
The WLAN devices operate in license-free RF bands, eliminating the need to procure
an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific,
and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz
Unlicensed National Information Infrastructure (UNII) bands.
•
The WLAN device is Wi-Fi certified and operates (as applicable) at the maximum data rate
of 867 Mbps in IEEE802.11ac mode, 450 Mbps in IEEE802.11n mode (300 Mbps in this
configuration); 54 Mbps in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.
•
•
The WLAN devices support the following encryption methods - WEP,
TKIP, CKIP, and AES encryption.
The Wireless LAN devices are compliant with the following standards: WPA,
WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0.
Wireless LAN Modes Using this Device
Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity
between multiple computers is established without a central wireless network device, typically
known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer
fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc
networks are an easy and inexpensive method for establishing network connectivity between
multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption
key settings are identically configured on all computers in the Ad Hoc network.
109
Fujitsu
Appendix
Access Point (Infrastructure) Mode
Infrastructure mode refers to a wireless network architecture in which devices communicate with
wireless or wired network devices by communicating through an Access Point. In infrastructure
mode, wireless devices can communicate with each other or with a wired network. Corporate
wireless networks operate in infrastructure mode because they require access to the WLAN in
order to access services, devices, and computers (e.g., file servers, printers, databases).
Fujitsu
110
Appendix
**
*
*
= An optional hub for a wired LAN may
be required depending upon the type
of access point used.
** = ADSL modem, cable modem, or similar
How to Handle This Device
The WLAN device is an optional device that may come pre-installed in your mobile computer. Under
normal circumstances, it should not be necessary for you to remove or re-install it. The Operating
System that your mobile computer comes with has been pre-configured to support the WLAN device.
•
•
•
Integrated Intel Centrino wireless LAN devices support, optional Intel® Dual Band
Wireless-AC 8265 (802.11 ac/a/b/g/n) with Bluetooth Wireless v 4.1
The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz
lower, middle, and upper UNII bands.
Microwave ovens may interfere with the operation of WLAN devices since they operate in the
same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves
does not occur with IEEE802.11a radio which operates in the 5 GHz RF band.
•
Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN
devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput,
intermittent disconnects, and many frame errors. It is HIGHLY recommended that these
interfering devices be powered off to ensure proper operation of the WLAN device.
Fujitsu
111
Appendix
Deactivating/Disconnecting the WLAN Device
Disconnecting the WLAN device may be desired in certain circumstances (to extend battery
life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The
WLAN device can be disconnected in Windows using the WLAN icon in the system tray
(Note that disconnecting via the icon in the system tray does not turn off the radio; it
continues to transmit and receive even though it’s not connected.)
F5
►
Press the key
to deactivate the Wireless Device
WBluiretloeossthLAN
The wireless component indicator will go off when the wireless components are switched off.
ꢀ
Configuring the Wireless LAN
The optional WLAN device can be configured to establish wireless network connectivity
using the software that is built into Windows. Support for most industry standard
security solutions is contained in this software.
Pre-defined parameters will be required for this procedure. Please consult with
your network administrator for these parameters:
Configuring the WLAN Using Windows
The WLAN device can be configured to establish wireless network connectivity using
the software that is built into Windows Vista. Support for most industry standard
security solutions is contained in this software.
Pre-defined parameters are required for this procedure. Consult your network
administrator for these parameters:
Windows
X
1. From the Modern Start screen, press
+
, then select Control Panel from the menu.
2. If the Control Panel is not in Classic View, select Classic View from the left panel.
Double-click the Network and Sharing Center icon.
3. Select Setup a new connection or network.
4. Depending upon what type of connection you would like to make, make a selection. For
an infrastructure network, select Manually connect to a wireless network.
5. Enter the required information. It may be necessary to consult with your network
administrator for some of the information.
6. In the event you require assistance, go to the Network and Sharing Center window (Control
Panel > Network and Sharing Center), and type in relevant keywords in the Search box.
Connection to the network
After you have configured your computer, you can connect to an active network
by performing the following steps:
1. Click on the WLAN icon in the system tray.
2. Select Connect to a network.
3. Select a network from the list that appears, and click the Connect button.
Fujitsu
112
Appendix
Troubleshooting the WLAN
Causes and countermeasures for troubles you may encounter while using your
wireless LAN are described in the following table.
Problem
Possible Cause
Possible Solution
Unavailable network connection Incorrect network name (SSID) Ad hoc connection: verify that
or network key
the network names (SSID’s)
and network keys (WEP) of
all computers to be connected
have been configured correctly.
SSID’s and WEP key values
must be identical on each
machine.
Access Point (Infrastructure)
connection: set the network
name (SSID) and network key
to the same values as those of
the access point.
Set the Network Authentication
value identically to that of the
Access Point. Please consult
your network administrator for
this value, if necessary.
Weak received signal strength Ad hoc connection: Retry
and/or link quality
connection after shortening
the distance to the destination
computer or removing any
obstacles for better sight.
Access Point (Infrastructure)
connection: Retry connection
after shortening the distance to
the access point or removing
any obstacles for better sight.
113
Fujitsu
Appendix
Problem
Possible Cause
Possible Solution
Unavailable network connection The WLAN device was
Check if the wireless switch
is turned On. Go to Start >
Control Panel, and doubleclick
on Windows Mobility Center. If
the wireless network is off, click
the Turn wireless on button.
(continued)
deactivated or is disabled
The computer to be connected Check if the computer to be
is turned off
connected is turned ON.
Incorrectly configured network Recheck the configuration of
settings
your network settings.
RF interference from Access
Points or other wireless
networks
The use of identical or
overlapping RF channels can
cause interference with the
operation of the WLAN device.
Change the channel of your
Access Point to a channel
that does not overlap with the
interfering device.
Wireless network authentication Re-check your Network
has failed
Authentication, Encryption,
and Security settings.
Incorrectly configured
security settings such as
an incorrectly typed WEP
key, a mis-configured LEAP
username, or an incorrectly
chosen authentication method
will cause the LAN device to
associate but not authenticate
to the wireless network.
Incorrect IP address
configuration
This only applies to networks
using static IP addresses.
Please contact your network
administrator for the correct
settings.
114
Fujitsu
Appendix
Using the Bluetooth Device
Bluetooth is integrated into the Wireless LAN module. The Bluetooth capabilities are Bluetooth
Basic, EDR and Bluetooth Low Energy (BT v4.0) operational modes.
What is Bluetooth
Bluetooth technology is designed as a short-range wireless link between mobile devices, such
as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create
Personal Area Networks (PANs) between devices in short-range of each other.
Proceed as follows to individually enable or disable wireless LAN or Bluetooth devices:
F5
1. Switch on the WLAN/Bluetooth via the key
.
2. In the screen Modern Start, select the option Charms > Settings
> Change PC Settings > Wireless.
3. Under Wireless > Wireless Devices, click on the switch Bluetooth to switch on Bluetooth.
Where to Find Information About Bluetooth
For additional information about Bluetooth Technology, visit the Bluetooth
Web site at: "www.bluetooth.com".
FCC Radiation Exposure Statement
This system complies with the FCC limit values for radio frequency radiation in an uncontrolled
environment. The Bluetooth antenna is located at the top edge of the LCD screen and is exempt
from the criteria for minimum distance because of its low power consumption.
The transmitter used in this system must not be operated together with other antennas or transmitters.
Canadian Notice
To prevent radio interference to licensed services, this system is designed for use in indoor spaces
/ in buildings and not directly at window openings, to allow a maximum shielding.
Warranty
Users are not authorized to modify this product. Any modifications invalidate the warranty.
This equipment may not be modified, altered, or changed in any way without signed
written permission from Fujitsu. Unauthorized modification will void the equipment
authorization from the FCC and Industry Canada and the warranty.
Fujitsu
115
Appendix
Image Backup and Recovery Procedures
Windows 10 Procedures
It is very important that you create your Recovery Drive before beginning to use your system.
It is also important that you create a backup of the content of the C:\Drivers folder on
your system to writable media or an external drive. System-specific software drivers
are also available for download through the Fujitsu support site.
In Windows 10 S configurations, go to C:\Windows\System32\DriverStore.
Note: Most of the information below comes from the Microsoft® page
Please refer to it for more details.
Creating a recovery drive
A recovery drive can help you troubleshoot and fix problems with your PC, even if it
won’t start. To create one, all you need is a USB flash drive. Windows will inform you
of the size the USB flash drive needed to hold the required data.
1. From the taskbar, search for Create a recovery drive and then select it. You may be
asked to enter an administrator password or confirm your selection.
2. When the tool opens, make sure Backup system files to the recovery drive
is selected and then select Next.
3. Connect a USB drive to your PC, select it, and then select Next - Create. A large number of
files need to be copied to the recovery drive, so this could take some time.
4. When it’s done, select Finish.
Note:
If you chose not to back up the system files when you created your recovery drive on
Windows 10, you won’t be able to use it to reinstall Windows.
Recovery options in Windows 10
If your PC isn’t running as quickly or reliably as it used to, try one of these recovery
options. The following table can help you decide which one to use.
Problem
Try this
Your PC isn’t working well and you recently
installed an app, driver, or update.
Restore from a system restore point
Your PC isn’t working well and it’s been a while Reset your PC
since you installed anything new.
Fujitsu
116
Appendix
Problem
Try this
Your PC won’t start and you’ve created a
recovery drive.
Use a recovery drive to reinstall Windows
Your PC won’t start and you haven’t created a
recovery drive.
Use installation media to reinstall Windows.
Note: Installed media not available in Windows
10 S configurations.
Restore from a system restore point
This option takes your PC back to an earlier point in time, called a system restore point. Restore
points are generated when you install a new app, driver, or Windows update, and when you
create a restore point manually. Restoring won’t affect your personal files, but it will remove
apps, drivers, and updates installed after the restore point was made.
Windows® 10 Pro, Home configurations:
1. Right-click (or press and hold) the Start button, and then select Control Panel.
2. Search Control Panel for Recovery.
3. Select Recovery - Open System Restore - Next.
4. Choose the restore point related to the problematic app, driver, or update,
and then select Next - Finish.
Windows 10 S configurations:
1. Navigate to Settings.
2. Select Update & security.
3. In the left pane click Recovery.
4. Under Reset this PC click Get started.
5. Depending on whether you want to keep your data files intact, select either
Keep my files or Remove everything.
Note: If you don’t see any restore points, it could be because the system protection isn’t turned
on. To check, go to the Control Panel, search for Recovery, and then select Recovery - Configure
System Restore - Configure and make sure that Turn On System Protection is selected.
Reset your PC
Resetting lets you choose whether to keep your files or remove them, and then reinstalls Windows.
To get started, go to Settings - Update & security - Reset this PC - Get started and choose an option.
117
Fujitsu
Appendix
Option
What it does
Keep my files
The following apps are removed after you reset your PC:
•
•
•
•
•
•
•
•
•
Anytime USB Charge Utility
Battery Change Utility
Battery Utility
FUJ02E3 Device Utility
Function Manager - CPU performance
LIFEBOOK Application Panel
Mic Mute Utility
Pen Low Battery Notification
Pointing Device Utility for P728
These apps can be installed from the Windows Store. The web links
can be found at C:\Fujitsu Extras\Support\Softwares
Remove everything
This reinstalls Windows 10 and any apps that came with your PC.
It removes:
•
•
•
Personal files
Changes you made to settings
Apps and drivers you installed
If you’re planning to donate, recycle, or sell your PC, use this option
and choose to fully clean the drive. This might take an hour or
two, but it makes it harder for other people to recover files you’ve
removed.
You may need to reinstall some of the applications that came with your PC. Go to the
Windows Store by clicking the web shortcuts stored in C:\Fujitsu Extras\Support\Softwares,
App
Link
Battery Change Utility
Battery Utility
FUJ02E3 Device Utility
Function Manager
Function Manager (CPU
performance)
LIFEBOOK Application
Panel
Mic Mute Utility
Pointing Device Utility for
P728
Fujitsu
118
Appendix
Use a recovery drive to reinstall Windows (not available for Windows 10 S)
Note: This process utilizes the USB Recovery Drive that you created in the
previous section "Create a Recovery Drive".
1. Connect the recovery drive and turn on your PC.
2. On the Choose an option screen, select Troubleshoot - Reset this PC, and then
choose the reset option that’s best for you.
If that doesn’t fix the problem, try Troubleshoot - Recover from a drive. This will remove your personal
files, apps and drivers you installed, and changes you made to settings. If you repartitioned the
drive Windows is installed on, note that this will restore the drive’s default partitions.
Use installation media to reinstall Windows (not available for Windows 10 S)
If you have installation media, like a Recovery DVD that you purchased from
Fujitsu, you can use it to reinstall Windows. You will need to install additional
drivers and applications after reinstalling Windows.
To reinstall Windows, follow the steps below:
F12
1. Power on your system. When the Fujitsu logo appears on the screen, press the
2. Insert the bootable disc in your DVD drive.
key.
Enter
3. Highlight the CD/DVD option from the Boot Menu and press
4. Follow the on-screen instructions to restore the image.
.
•
•
Select the language.
At the Windows Setup dialog window, enter your OS, language and other
preferences and click Next to continue.
•
•
•
•
Click Install now to proceed with reinstalling Windows.
At License terms, check on I accept the license terms and click Next.
At Which type of installation do you want, click on Custom: Install Windows only (advanced).
Delete all partitions on the drive and click Next. Installation of Windows will start. This will
take some time so please wait until the installation is finished and the system restarts.
5. When the system restarts, perform all set-up steps to arrive at the Desktop.
6. Connect to the Internet.
7. Use the Backup of the contents of the C:\Drivers folder to install needed drivers and
applications to your system. If it is not available, download the software from the
Fujitsu Support Site, as described below in the "Auto Installation support for the
software downloaded from support website" section below.
Installation of essential access software (not available for Windows 10 S)
1. Insert the bootable disc in your DVD drive.
2. Open the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Drivers
folder in the bootable disc, the computer does not need the essential access software.
The recovery image already has the essential access software installed.
3. You can now connect to the internet and download FSDM (Fujitsu Software Download
Manager) from the support site and download all the software applicable to the
model and OS using FSDM if they are not downloaded yet.
Fujitsu
119
Appendix
Auto Installation support for the software downloaded from support website
(not available for Windows 10 S)
For Windows 10 S configurations, Auto Installation is not supported. Also, for
Windows 10 S, software may not be uploaded to the support site. Users with
factory image is expected to get software from the Windows Store.
1. Download FSDM (Fujitsu Software Download Manager) from the support site and download all
the drivers applicable to the model and OS using FSDM if they are not downloaded yet.
2. When the software packages are downloaded from the web, it is important to
download the Auto Installer Software package and the model/language-specific
Readme file if you prefer to auto install the software.
3. It is important to have the extracted Auto Installer software package folder and
Readme file in the same location as the other software folders. Otherwise
auto-installation of the software will not be supported.
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.
5. Click Yes on the User Account Control dialog box. This will take some time to
process the software packages. A message will be displayed during this time
stating Please wait while the content is being processed.
6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.
7. The Fujitsu Software Auto Installer user interface will be launched providing the ability
to auto install the software downloaded from the support site.
8. It is recommended that you install all the software in the listed order. You can
Select All, to install the software in the order listed.
9. Click the Install button to start the installation.
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.
11. You must restart the system for the settings to take effect. Do you wish to reboot
now? message appears. Select Yes.
12. The system will now reboot.
Downloading driver updates
This section: In Windows 10 S configurations, driver updates might currently not
be uploaded to support site. User with factory image is expected to get driver
updates via Windows Update and applications from Windows Store.
To ensure that you always have the most current driver updates related to your system,
you should occasionally access the Fujitsu Software Download Manager (FSDM) utility.
The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view
and download the most current drivers, utilities and applications to determine whether
you have the latest versions. To download the FSDM utility, go to the support site:
Fujitsu
120
Index
G
H
I
N
K
L
Num Lock
O
M
P
122
Fujitsu
Index
T
R
S
U
V
W
Fujitsu
123
Index
124
Fujitsu
|