OWNER’S MANUAL
Stand
Please read this manual carefully before operating your set and retain it for
future reference.
AP-C1AV48
AP-C1AV55
AP-C1AV65
*MFL71787522*
(2201-REV01)
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
How to Assemble the Stand
1
• When assembling the stand, put the product on a table or a
flat floor with its screen facing downward. Here, first put a
soft and fluffy cloth on the place, and then put the product
on top of it to prevent the screen from being damaged.
• When assembling the stand, check if the screws are
completely fastened. (If they are not completely fastened,
the product may lean forward after being installed.) Avoid
fastening the screws with excessive force because otherwise
the joint part of the screws may be worn out, and the screws
might come off.
• When assembling the product, do not use foreign substances
(oil, lubricant, etc.) on the screws.
- It may cause damage to the product.
• Before installing a wall mount support, disassemble the
Stand by conducting the method to assemble the stand in a
reverse order.
2
3
3
x 4
4
5
6
7
8
M4 x L20
9
: The cover is provided as TV accessories. (Depending on Model.)
4
Mounting on a Table
Securing the TV to a Wall
1
Lift and tilt the TV into its upright position on a table.
•
Leave a 10 cm (minimum) space from the wall for proper
ventilation.
10 cm
1
Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
•
If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2
Connect the power cord to a wall outlet.
2
3
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
• Do not apply foreign substances (oils, lubricants, etc.) to the
screw parts when assembling the product. (Doing so may
damage the product.)
Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
• Do not use any unapproved items to ensure the safety and
product life span.
• Any damage or injuries caused by using unapproved items
are not covered by the manufacturer’s warranty.
• Make sure that the screws are inserted correctly and fastened
securely. (If they are not fastened securely enough, the TV
may tilt forward after being installed.) Do not use too much
force and over tighten the screws; otherwise screw may be
damaged and not tighten correctly.
• Use a platform or cabinet that is strong and large enough to support
the TV securely.
• Brackets, bolts and ropes are not provided. You can obtain additional
accessories from your local dealer.
Specifications
• Only use the authorized stand and wall mounting bracket
made specifically for LG products.
- Pursuant to Consumer Protection Law, LG Electronics will
not be held responsible for any product malfunction,
material damage or injury caused by using products not
authorized by LG Electronics.
Model Name
AP-C1AV48
AP-C1AV55
AP-C1AV65
Width x Height x Depth (mm) Weight (kg)
838 x 135 x 251
998 x 135 x 251
998 x 135 x 251
3.1
4.1
8.7
5
6
7
The model and serial number of the product are located
on the back and on one side of the product. Record
them below in case you ever need service.
Model
Serial No.
|