Item #457-864
Model #49808
UPC #043180498083
Use and Care Guide
DAYLIGHT ADJUSTING INDOOR DIGITAL TIMER
Before You Begin
Product Features
Safety Information
□
Pre-programmed sunrise and sunset times that adjust automatically throughout the year
based on your location.
Set one or more ON/OFF settings for each day of the week, daily cycles, or weekday -
weekend cycles
Stores up to 7 individual programs
A Random feature which turns the lights off and on between 30 minutes before and after the
programmed time, giving the appearance that somebody is currently home
RISK OF ELECTRIC SHOCK:
Plug directly into an electrical outlet
Do not use in wet locations
Use indoors only
Unplug the timer before cleaning
Keep children away
□
WARNING
□
□
RISK OF FIRE:
Do not use to control appliances that contain heating elements
[cooking appliances, heatrs, irons, etc.]
□
2 grounded outlets
Do not exceed electrical ratings
Do not use with extension cords
Product Specifications
RATINGS
15A General Purpose /
Resistive
1250 W(10A)
Tungsten
125 VAC, 60 Hz
1/2 HP Motor
Programming Instructional Video
To view an instructional video on how to program this product:
corner of this instruction sheet in the search field.
2. Click on your product from the list of search results and click on the video link in the Product
Overview section.
Initial Setup
PRODUCT DESCRIPTION
Timer display shown in standard Clock mode:
Part Description
C
RCL/RND: When programming press to clear the ON/OFF setting. When in Clock mode, push
to activate the random feature, which turns the lights off and on between 30 minutes before
and after the programmed time, giving the appearnce that somebody is currently home.
A
A
B
AUTO
PM
D
E
F
SET: Hold for 5 seconds to set the clock/date. Push to confirm a setting and move to the
next option.
B
C
TU
PROGRAM: Hold 5 seconds to program ON/OFF timer settings. Push when programming is
complete to activate the timer.
RESET
D
E
F
UP/DOWN: Scroll through the Settings options.
RESET: Press and hold with a toothpick to clear all settings on the timer.
ON/OFF: ON=Always ON, Auto=Timer is active, OFF=Always OFF
SETTING UP THE TIMER FOR THE FIRST TIME
SETTING THE DAWN/DUSK REGION
1
2
IMPORTANT: This step does not set your time zone. In this step you are identifying your location based
NOTE: Upon initial setup, you will be following Steps 1 through 2. The timer will automatically
return to clock mode (clock displayed on the timer display) if no buttons are pressed for 1
minute. If this happens, press and hold the SET button for 5 seconds and continue pressing
SET to scroll through the settings to return to where you last left off in the set up process.
on this map to ensure an accurate sunup and sunset time for your area.
a. View the map below and determine which area best fits your location (see Figure 4). Press
UP/DOWN to scroll through the available areas in the timer and press SET at the appropriate
area. The options are:
If the LCD screen is displaying numbers, you are ready to program and can proceed with
these steps. If the screen is blank, plug in the timer and leave for two hours to charge the
internal battery before programing.
□ NOR: North
□ CENT: Central
□ SOU: South
□ HI: Hawaii
a. Use a toothpick or sharp pencil to push the RESET
button. The screen will go blank briefly and then
display 12:00 AM.
□ ALAS: Alaska
b. Press and hold SET for 5 seconds until the hour
AUTO
b. The timer display shows SUNUP and the timer’s pre-set SUNUP time with the HOUR blinking.
This SUNUP time should be close to the time the sun rises in your area. If this time is
acceptable, press SET twice to proceed to step d. To revise the SUNUP time, proceed to
step c.
AM
begins to flash. Release the button. See Figure 1.
TH
Figure 1
c. To revise the SUNUP setting, press UP and DOWN as needed to adjust the hour. Pay attention
to the AM and PM at the top of the timer display. Press SET to confirm the hour and then
press UP and DOWN as needed to set the minutes. Press SET to confirm the minutes.
c. Press UP/DOWN to adjust the hour. Press SET to
confirm. The default is 12 AM. Take note of the AM/
PM on the upper left of the screen when setting the
hour.
d. When SUNSET flashes on the timer display, repeat step b.
d. Press UP/DOWN to adjust the minute. Press SET to
confirm.
e. Press UP/DOWN to adjust the year. Press SET to
confirm.
ALASKA
DAY
f. Press UP/DOWN to adjust the month. Press SET to
confirm. See Figure 2.
MONTH
YEAR
NORTH
NORTH
Figure 2
CENTRAL
g. Press UP/DOWN to adjust the day. Press SET to
CENTRAL
confirm.
h. Press UP/DOWN to select DST ON or DST OFF and
press SET to confirm. DST stands for Daylight
Savings Time. If DST is set to ON, this feature
automatically resets the times in the timer to match
the current time change. The default DST time
change is 2:00 am, the second Sunday of March,
and then the first Sunday in November. Press SET to
confirm. See Figure 3.
SOUTH
SOUTH
DST ON
MONTH
YEAR
Figure 3
HAWAII
i. When the timer display flashes NOR, proceed to
Step 2 – SETTING THE DAWN/DUSK REGION.
Figure 4
CONTINUE TO PAGE 2 TO COMPLETE SETUP AND PROGRAMMING
IP07232014
HOMEDEPOT.com
Please contact 1-866-308-3976 for further assistance.
|