Hanging installation
The F12/F15 can be installed hanging. Remove the four countersunk screws on the top or bottom of the speaker system,
screw in the four accessory eye bolts and hang with wire.
When hanging the speaker system, carry out the work under the guidance of an expert with a safe method appropri-
ate to the actual installation and environment.
Eye bolt (3/8")
Countersunk screw
Warning: • Always use the accessory eye bolts.
• Always hang with four eye bolts on one surface.
• Do not use the handle to hang the speaker system.
■Standards and use conditions for flying
1Always hang from four points. (Figure 1)
2Use the fittings for the F12/F15 with a total load no greater than 172 kg including the speakers, eye bolts, wires, etc.
3Use with a hanging angle of no greater than 45°. (Figure 2)
4When hanging in a vertical array, use no more than 4 levels of F12s or 3 levels of F15s.
5Verify the strength of wire rope, ceiling fittings, and connection fittings.
* 1–5above are reference values.
45° maximum
(Figure 1: Always hang from four points.)
(Figure 2: Retraction angle 45° maximum)
■Maintenance inspection
Parts can deteriorate due to wear, corrosion, etc. during use. For the sake of safe usage, inspect periodically.
4
Download from Www.Somanuals.com. All Manuals Search And Download.