®
Visioneer
Strobe XP 220 Scanner
User's Guide
for Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
Visioneer®
Strobe XP 220 Scanner
User’s Guide
F O R W I N D O W S
Download from Www.Somanuals.com. All Manuals Search And Download.
C O P Y R I G H T I N F O R M A T I O N
Copyright © 2007 Visioneer, Inc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort® and OmniPage® brand names and logos are registered
trademarks of Nuance Communications, Inc. ArcSoft PhotoImpression® is a registered brand name of ArcSoft, Inc. Kofax® and Virtual ReScan® are
registered trademarks, and VRS™ is a trademark of Kofax Image Products, Inc. X1® Enterprise Client is a registered trademark of X1 Technologies, Inc.
Adobe®, Adobe® Acrobat®, Acrobat® Reader®, and the Adobe® Acrobat® PDF® logo are registered trademarks of Adobe Systems Incorporated in the
United States and/or other countries. The Adobe PDF logo will appear in this product’s software, and full access to Adobe software features is only available if
any Adobe product is installed on your computer.
This product is covered by one or more of the following patents: 6,480,304; 5,818,976; 5,499,108; 5,517,332.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark and SharePoint® is a registered trademark of Microsoft
Corporation. ZyINDEX is a registered trademark of ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998, ZyLAB International,
Inc. All Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The software described is furnished under a
licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy the software on
any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another language, for any
purpose other than the licensee's personal use and as specifically allowed in the licensing agreement, without the express written permission of Visioneer.
Part Number: 05-0730-200
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software
Clause 52.227-FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer
is solely responsible for complying with all such laws and regulations.
Visioneer's Limited Product Warranty
IF YOU FIND PHYSICAL DEFECTS IN THE MATERIALS OR THE WORKMANSHIP USED IN MAKING THE PRODUCT DESCRIBED IN
THIS DOCUMENT, VISIONEER WILL REPAIR, OR AT ITS OPTION, REPLACE THE PRODUCT AT NO CHARGE TO YOU, PROVIDED YOU
RETURN IT (POSTAGE PREPAID, WITH PROOF OF YOUR PURCHASE FROM THE ORIGINAL RESELLER) DURING THE 90-DAY PERIOD
AFTER THE DATE OF YOUR ORIGINAL PURCHASE OF THE PRODUCT. UPON RECEIPT DURING THE INITIAL 90-PERIOD BY
VISIONEER OF A VALID REGISTRATION OF THE PRODUCT, THIS LIMITED PRODUCT WARRANTY PERIOD IS EXTENDED TO THE
12-MONTH PERIOD AFTER THE DATE OF YOUR ORIGINAL PURCHASE. IF A VALID REGISTRATION IS NOT RECEIVED DURING THE
INITIAL 90-DAY PERIOD, THE 12-MONTH WARRANTY IS NO LONGER AVAILABLE AND YOUR PRODUCT WARRANTY WILL
TERMINATE AFTER THE 90-DAY INITIAL PERIOD EXPIRES.
THIS IS VISIONEER'S ONLY WARRANTY AND YOUR EXCLUSIVE REMEDY CONCERNING THE PRODUCT, ALL OTHER
REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE EXPRESSLY EXCLUDED. AS A RESULT,
EXCEPT AS SET OUT ABOVE, THE PRODUCT IS SOLD “AS IS” AND YOU ARE ASSUMING THE ENTIRE RISK AS TO THE PRODUCT'S
SUITABILITY TO YOUR NEEDS, ITS QUALITY AND ITS PERFORMANCE.
IN NO EVENT WILL VISIONEER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY DEFECT IN THE PRODUCT OR FROM ITS USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
All exclusions and limitations in this warranty are made only to the extent permitted by applicable law and shall be of no effect to the extent in conflict with the
express requirements of applicable law.
RoHS and WEEE Compliance
This product is compliant with RoHS Regulations of the European Parliament and Council Directive on the Restrictions of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment (2002/95/EC), and with the Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC).
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with
FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer
could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
i
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting Destination Application Properties . . . . . . . . . . . . . . . . 41
Selecting Format Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Scanning with Optical Character Recognition (OCR) . . . . . . . . 57
Selecting OCR Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
TABLE OF CONTENTS
To Use OCR Before Transferring to Storage . . . . . . . . . . . . . . 109
Getting Help with the PaperPort Software . . . . . . . . . . . . . . . 128
Setting Up Your Scanner to Work with PaperPort . . . . . . . . . . . . . 129
Scanning from the WIA Interface . . . . . . . . . . . . . . . . . . . . . . . . 136
Fine Tuning Your Scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Turn AutoLaunch Off/On . . . . . . . . . . . . . . . . . . . . . . . . 152
Visioneer Strobe XP 220 Scanner Specifications . . . . . . . . . . . . . . 159
Visioneer Strobe XP 220 Scanner Parts List . . . . . . . . . . . . . . . . . . 160
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
TABLE OF CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Congratulations for purchasing your Visioneer Strobe XP 220 scanner.
With your scanner, you can quickly scan color and black-and-white
documents and place their electronic images on your computer.
WHAT’S IN THE BOX
Please check the contents of the box to make sure that all parts are
included. If any items are missing or damaged, contact the dealer where
you purchased the scanner.
USB/Power Connector Cable
(called a USB “Y-Cable”)
Visioneer Strobe XP 220 Scanner
Power Supply
Plug Adapters
Cleaning Page
Calibration Page
Photo Sleeve for
scanning photos
Two CDs
Disc 1 and Disc 2
Quick Install Guide Technical Support Card
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
THE VISIONEER STROBE XP 220 SCANNER
Scanner button
Alignment arrow
Page feed
Alignment arrow
Paper return
Paper return icons
Connection Port
(for USB and Power)
Scanner Button—If a OneTouch scan is in progress, pressing the button cancels the scan
and the paper comes out of the scanner. If a OneTouch scan is not in progress, pressing the
button opens the OneTouch 4.0 window so you can adjust the scanner settings.
Alignment arrows—Indicates where to align the edges of the document when inserted into
the scanner.
Page feed—Automatically feeds the document through the scanner when the sensor inside
the scanner detects the presence of a document.
Paper return—Can be positioned to feed a document either straight through the scanner or
returned back towards you.
Paper return icons—Indicates how to position the paper return: up to feed the document
straight through the scanner, and down to return the document back towards you.
Connection port—Connects the scanner to the USB y-cable provided for connection to
the computer and the power supply.
Note: The scanner does not have an on/off switch. Just insert a document into the
page feed and the scanner will start scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT YOU NEED
3
WHAT YOU NEED
An IBM-compatible Pentium 4 PC, or AMD equivalent with:
■ A CD-ROM drive
■ An available Universal Serial Bus (USB) port; 1.1 or 2.0
■ Microsoft® Windows® operating system: 2000 (Service Pack 4), XP
(Service Pack 1 and 2), or Vista
■ Windows 2000 and XP: Minimum of 512 megabytes (MB) of
internal memory (RAM)
Windows Vista: Minimum of 1 gigabyte (GB) of internal memory
(RAM)
■ 350 MB minimum of free hard disk space
A VGA or SVGA Monitor
The recommended settings for your monitor are:
■ High Color (16-bit) or True Color (24-bit or 32-bit)
■ Resolution set to at least 800 x 600 pixels
To set your monitor’s colors and resolution:
■ Open the Windows Control Panel
■ Double-click on Display then select the Settings tab.
DOCUMENTATION
The following documentation is provided with the scanner:
■ Quick Install Poster—Abbreviated installation instructions.
■ Visioneer Strobe XP 220 Scanner User’s Guide—On the Installation
CD; contains detailed information about installation, scanning,
configuration, and maintenance.
■ PaperPort User’s Guide—On the Installation CD; contains detailed
feature and configuration information for the PaperPort software.
■ Online Help—For the scanner configuration, TWAIN and WIA
interfaces, and PaperPort software.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Installing
Installation is a quick, three-step process:
■ Install the PaperPort software and scanner driver
■ Connect the power supply and USB cable
■ Calibrate the scanner
BEFORE YOU BEGIN
■ If your computer has AntiVirus or AntiSpyware software running,
you may see messages during installation asking you to allow the
installation to proceed. Although the messages will differ based on
the software your computer is running, in each case you should
allow the installation to proceed. Alternatively, you can turn off the
AntiVirus or AntiSpyware software before installing your scanner,
but make sure to turn it back on again when installation is finished.
■ If you already have a scanner connected to your computer, it is
recommended that you remove that scanner’s driver program prior
to installing your Visioneer Strobe XP 220 scanner. While in some
cases you can configure your computer to have another
manufacturer’s scanner operational on your computer in
conjunction with the Visioneer scanner, we do not recommend this
configuration as you may lose some of the driver functionality on
one, or both of the units. You can remove these programs from the
Windows Add/Remove Programs list. Please refer to the user
manual provided with your other scanner for instructions about
removing the driver and software for that unit.
■ The information in this guide may cover software not provided
with the scanner you purchased. Please disregard any information
about the software not applicable to your scanner.
■ If your computer is running Windows Vista, you may see the Vista
User Access Control screen asking you to confirm system changes.
Click the Continue button to allow the installation to proceed.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: INSTALL THE SOFTWARE
5
STEP 1: INSTALL THE SOFTWARE
Note: You must install the software before connecting the scanner to
your computer. Otherwise, the correct driver software for your scanner
will not be installed and it may not work properly.
To install the software:
1. Start Microsoft Windows and make sure no other applications are
running.
2. Insert Disc 1 into your computer’s CD-ROM drive.
Note: If the CD does not start automatically, check the following:
■ Make sure you have inserted Disc 1.
■ Make sure the CD drive’s door is completely shut.
■ Make sure the CD was inserted in the drive in the proper
direction (label side up).
To launch the CD manually:
■ Open the Windows option for My Computer. You can do this by
double-clicking on the My Computer icon on your desktop.
■ Double-click the icon for your CD-ROM drive.
■ The Installation menu for the CD should now open.
If the menu does not open:
■ From the list of files on the CD, double-click the file named
START32.EXE.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
When the CD starts, the Visioneer Installation window opens
automatically.
3. On the Main Menu, click Install Products.
The next window lists the software that is available to install on
your computer.
4. Select Nuance® PaperPort®, Scanner Driver, and OmniPage
Pro.
5. Click Install Now. The PaperPort software will load first.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: INSTALL THE SOFTWARE
7
6. The Select Language window opens for the PaperPort software.
Click the drop-down menu arrow and select the language you want
to use. Click OK.
The first PaperPort Installation window opens.
7. On the PaperPort Welcome window, click Next.
Installing PaperPort will uninstall any existing version of PaperPort
and will install the newer version while retaining all of your
previous PaperPort files.
8. Read the PaperPort license agreement and select I accept the terms
in this agreement, then click on Next. If you choose not to accept
the license agreement, the installation will terminate and the
PaperPort software will not be installed.
9. On the Customer Information window, accept the current values or
enter new information, then click Next.
10. On the Setup Type window, keep the default Setup Type and click
Next.
11. Click Install to begin the installation.
Reminder: If your computer is running an AntiVirus or
AntiSpyware application, you may see messages asking you to allow
installation. Select the option to allow installation to proceed.
12. On the Product Registration window, do one of the following:
■ Select Register online, click OK, then follow the registration
instructions.
■ Select Print registration form, click OK, then follow the
instructions to complete and print the registration form.
■ Select Remind me in 7 days and click OK.
13. At the InstallShield Wizard Completed window, click Finish.
If a message window opens instructing you to restart your
computer, click Restart.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
14. The Welcome to the OneTouch 4.0 Setup Wizard opens.
15. Click Next.
16. On the Visioneer License Agreement window, read the license
agreement. If you accept the terms, select I Agree then click Next.
If you choose not to accept the license agreement, the installation
will terminate and the scanner driver will not be installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: INSTALL THE SOFTWARE
9
17. Click Next.
The next window lists the choices of the drivers that you can install
for your scanner.
18. Select the option you want.
Note: If your computer is running Windows XP or Vista, Microsoft’s
Windows Image Acquisition (WIA) interface for scanning is always
available, regardless of your selection on this window. WIA is only
available on computers running Windows XP or Vista.
■ OneTouch 4.0 Scan Environment + TWAIN Driver—This is
the recommended installation. It installs the OneTouch 4.0
software which provides the necessary driver software for your
scanner. It also installs the scanning interface for TWAIN.
Selecting this installation option means you can use either the
OneTouch software, or the TWAIN interface to scan. This User
Guide explains how to use both methods to scan.
■ TWAIN Driver—Only the TWAIN driver is installed. You will only
be able to scan using the TWAIN interface. You will not be able to
use the OneTouch software.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Note: If you decide to change the scanner’s installed drivers later on,
you must first uninstall the drivers the scanner is currently using. See
the section “How to Install Another Driver” on page 150.
19. Click Next.
During installation you will see this window asking you to select
one of the images for your Color Space setting.
The Color Space setting sets the gamma value for the scanner so
scanned items look good on your monitor. Gamma controls the
brightness of the midtones of colors. That setting can be changed
later on as you’re scanning.
20. Select the option that looks best to you and click Next.
The driver installation will now begin.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: INSTALL THE SOFTWARE
21. STOP when you see the “Complete the installation by connecting
your hardware” window. Do NOT click on OK yet. Leave the
window open and proceed to the next section, “Step 2: Connect the
Power Supply and USB Cable” on page 12.
Reminder: If your computer is running AntiVirus or AntiSpyware
software, you may see messages asking you to allow installation.
Select the option to allow installation to proceed.
Note: If you want to see more information about your scanner and a
quick explanation of how to use the OneTouch features, click on the
More button on the window. When you’re finished, return to the
window above to continue with the installation process.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
STEP 2: CONNECT THE POWER SUPPLY AND USB CABLE
You may now connect the scanner’s power supply and USB cable. The
USB cable plugs into any available USB port on the computer. Check
your computer’s manual for USB port locations.
Note: You can connect the scanner to your computer while the
computer is running. You do not have to shut down your computer.
Attach a Plug Adapter to the Power Supply
adapter for the electrical wall outlet at your location.
Note: Remember to take the plug adapters with you when traveling
to countries with different electrical outlets. To remove an adapter, see
the section, “How to Replace the Plug Adapter” on page 151.
The three plug adapters are for:
Europe
United Kingdom
United States
2. Position the adapter so it aligns with the edges of the power supply
and will slide onto the post in the middle of the two contacts.
Gently slide the adapter forward until it snaps into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2: CONNECT THE POWER SUPPLY AND USB CABLE
13
Attach the USB Y-Cable to the Power Supply and Connect the
Computer
The cable provided with the scanner is called a USB “Y-cable,” and you
will need to connect it to the scanner, computer, and power supply.
USB Y-Cable.
Scanner Connector.
Plugs into the port on
the back of the scanner.
Power Jack.
Plugs into the power supply.
USB Connector.
Plugs into the computer.
1. Using the on-screen window as your guide, plug the power supply
cable into the power jack on the USB Y-cable. Then plug the power
supply into an electrical outlet.
2. Plug the scanner connector on the Y-cable into the connection port
on the back of the scanner.
Please be sure the arrows on the scanner connector line up with the
arrows on the back of the scanner to avoid pins getting bent while
inserting the connection.
3. Plug the USB connector on the Y-cable into a USB port on your
computer. Connection to a USB 2.0 High Speed port provides
optimum performance, but you can also connect to a USB 1.1 port.
USB
Download from Www.Somanuals.com. All Manuals Search And Download.
14
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
The USB symbol, as seen in the above diagram, identifies the
location of the USB port on your computer. If the plug does not
attach easily, make sure that you are plugging it in correctly. Do not
force the plug into the connection.
You can also connect the scanner to a USB hub. The USB hub
must have its own power supply already plugged into an electrical
outlet.
If you are using Windows XP Service Pack 2, and have plugged the
USB cable into a USB 1.1 port, an information bubble may open
explaining that “A HI-SPEED USB device is plugged into a non-
HI-SPEED USB hub”. Plug the USB cable into a USB 2.0 port (if
available) or just disregard the message. If you leave it plugged into
the USB 1.1 port, your scanner may scan a bit slower.
4. Your computer recognizes that a scanner has been plugged into the
USB port and loads the appropriate software to run the scanner.
5. The window for calibrating the scanner will open. Proceed to
“Step 3: Calibrate the Scanner” on page 15.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: CALIBRATE THE SCANNER
15
STEP 3: CALIBRATE THE SCANNER
1. After the computer loads the appropriate software to run the
scanner, the Found New Hardware Wizard window opens.
2. You will need the calibration page that you received with your
scanner for the calibration process. The calibration page is in a
plastic storage bag. Remove the calibration page from its plastic
storage bag.
3. Before you start the calibration, please move the scanner’s Paper
Return into the Up position so the calibration page will feed
straight through the scanner.
The Calibration Page.
Move the Paper Return
to the Up position.
4. Now click Next on the Found new Hardware Wizard window.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
5. The Calibration window opens.
6. Insert the calibration page into the page feed in the direction of the
arrows on the page.
The scanner grabs the page and feeds it through the scanner.
The scanner will pass the page back and forth several times.
Do not remove the page until calibration is finished.
7. When calibration is complete, the calibration page will back out of
the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: CALIBRATE THE SCANNER
17
Note: If the page does not back out of the scanner, the calibration
may not have finished properly. Remove the page and complete the
installation of your scanner, then see the section, “Recalibrating and
Cleaning Your Scanner” on page 141 to run the calibration again.
8. Remove the page and replace it in its plastic bag.
Do not discard the calibration page. You may need it periodically to
calibrate the scanner to keep it operating at peak performance.
9. Click Next on the Calibration window.
10. Click Finish on the Completing the Found New Hardware Wizard
window.
Do not proceed until you receive a message that your computer has
found the new hardware, or updated the driver database. If your
computer is running Windows XP or Vista you will see a message
similar to this one.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
11. When you are certain that the software has completely loaded,
return to the “Complete the installation by connecting your
hardware” window and click OK.
12. Now click Close on the Installation Complete window.
Additional windows may briefly appear as the software installation
process continues. For more information about the specific software
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: CALIBRATE THE SCANNER
19
that may be installed, please see the Scanner Readme file on the
CD. See the section “View the User Guides” on page 22 to open
the Readme file.
13. If you also selected the full OmniPage Pro software for installation,
a window then tells you to insert the second CD to install it.
Note: The OmniPage Pro software provides additional OCR features
for your scanned documents.
To install OmniPage Pro:
1. Click Exit Disc 1 and remove Disc 1 from the CD-ROM drive.
2. Insert Disc 2 into the CD-ROM drive.
The OmniPage Pro Installation menu opens automatically. If it
does not open, see the note on page 5.
3. Select Install OmniPage Pro.
5. When installation is finished, remove Disc 2 and store it in a safe
place.
6. If you want to install other software from Disc 1, re-insert it into
the CD-ROM drive now and see the next section, “Additional
Applications for Your Scanner.”
Download from Www.Somanuals.com. All Manuals Search And Download.
20
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
ADDITIONAL APPLICATIONS FOR YOUR SCANNER
Your scanner includes free, additional applications on the installation
CD.
To install the additional applications:
1. Return to the Main Menu and click Install Products again.
2. Select the additional applications you want to install.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL APPLICATIONS FOR YOUR SCANNER
21
■ ArcSoft PhotoImpression is a set of software tools for
enhancing your scanned photos. You can use PhotoImpression to
change a photo’s brightness and contrast, sharpen the image,
change its color tones, remove red-eye from pictures of faces, and
crop and resize the image. PhotoImpression works with digital
photos directly from a camera, as well as photos scanned with
your Visioneer Strobe XP 220 scanner.
■ X1 Enterprise Client is software you use to search for desktop
files and emails stored on your computer. Using a single
interface, X1 Enterprise Client quickly and efficiently finds your
files and emails.
3. Click Install Now and follow the instructions on the screen.
4. When installation is complete, return to the Main Menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
VIEW THE USER GUIDES
The Installation CD also contains User Guides for your scanner and for
all the software you received with it.
To view the user guides:
1. On the Main Menu, click User Guides.
2. The Visioneer User Guides window opens. Use this window to view
and save the User Guides you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEW THE USER GUIDES
23
®
®
The User Guides are in Adobe Acrobat PDF format. The CD
®
®
also includes a free copy of Acrobat Reader in case your
computer does not have it already installed. The Scanner Readme
file is in HTML format and will open in any standard browser.
If you need to, click Acrobat Reader to install it now. Follow the
instructions on the installation windows.
If your computer already has Adobe Acrobat Reader installed, please do
not select it unless the version provided on the installation CD is a
newer version than the one currently installed on your computer.
3. Click the name of a User Guide you want to view and it will open
in Acrobat Reader. Use the Acrobat Reader Save command to save
that User Guide on your computer.
4. Return to the Visioneer User Guides window and repeat the process
to open, view, and save the other User Guides you want. The
Scanner Readme file has late-breaking news about your scanner.
5. When you’re finished, click Main Menu to return to the main
Visioneer Installation window and click Exit.
6. Remove the Installation CD from the computer and store it in a
safe place.
That’s it! Installation is finished and your Visioneer Strobe XP 220 scanner
is ready to scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
REGISTER YOUR SCANNER
Registering your scanner is important as it provides you with access to
our free telephone support service. Registration also gives you free access
to software updates for your scanner.
To register your scanner:
1. Right-click on the OneTouch icon in the Windows Notification
Area (at the bottom right corner of the screen).
2. Choose Check for Online Updates from the pop-up menu.
The OneTouch Icon.
3. Follow the instructions on the screen and register your scanner by
entering your scanner’s serial number and your email address.
Note: A valid email address is required.
The serial number is located on the underside of the scanner.
S/N: 57422C049735
Serial Number.
After registration is complete you will receive an email message with
your RegID. Your RegID is important as you will need it when
accessing free telephone support, or checking for online updates.
4. After receiving your RegID, write it down on a piece of paper and
keep it with your scanner so you will be able to find it easily.
Download from Www.Somanuals.com. All Manuals Search And Download.
REGISTER YOUR SCANNER
25
Scanning
You have several different scanning options with your Visioneer Strobe
XP 220 scanner. Each method scans equally well, so use the one
appropriate for the item you are scanning.
■ OneTouch—Your scanner uses Visioneer’s AutoLaunch technology
that senses when a document is inserted into the page feed and starts
automatically scanned using predefined settings from the OneTouch
software. To change the scanner’s settings you open the OneTouch
panel on the computer screen before scanning and make the changes.
with the new settings. See “Scan Using OneTouch” on page 29.
■ TWAIN Interface—Use this option to scan from the PaperPort
application you received with your scanner. Many other programs
“Scanning from the TWAIN Interface” on page 119.
■ WIA Interface—This option is the Microsoft Windows Image
Acquisition (WIA) interface. You can access the WIA interface from
the PaperPort software, or from other applications on your computer.
See “Scanning from the WIA Interface” on page 136. The WIA
interface is only available if your computer is running Windows XP
or Vista.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
SCANNING BASICS
SCAN A DOCUMENT
Note: Always remove any staples or paper clips from documents
before inserting them into the scanner. Staples and paper clips can jam
the feed mechanism and scratch the internal components. Also remove
any labels, stickers, or Post-It™ notes that may come off during the
scanning process and get stuck in the scanner. Misuse as described here
will void your scanner’s warranty.
To scan a document:
1. Align the page with the alignment arrows.
Alignment arrow
Alignment arrow
Misaligned pages will not feed into the scanner properly.
2. Insert the page face up and feed it straight into the page feed.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING BASICS
27
PAPER RETURN OPTIONS
The position of the Paper Return determines the path of the scanned
document. You can set the paper return to feed the document back
towards you, or straight through the scanner.
■ To have the scanned document returned back towards you, move the
Paper Return to the Down position.
■ To feed a document straight through the scanner, move the Paper
Return to the Up position as shown below.
The Paper Return icons on the back of the scanner indicate the
positioning of the Paper Return for each option.
Note: When scanning heavier paper that does not bend easily,
position the Paper Return in the Up position so the document will
feed straight through the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
SCAN A PHOTO
The photo sleeve you received with your scanner is for scanning
photographs.
To scan a photo using the photo sleeve:
1. Separate the clear plastic sleeve from the paper backing and slide the
photo into the sleeve so it fits snugly at the corners.
2. Now insert the photo and sleeve into the scanner’s page feed with
the clear plastic and image facing up.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCAN USING ONETOUCH
29
SCAN USING ONETOUCH
1. Align the document between the alignment arrows and insert it,
face up, into the page feed slot.
2. The AutoLaunch technology senses that a document is inserted
grab the top edge of the paper and begin to scan and feed the
document through the scanner.
“How to Turn AutoLaunch Off/On” on page 152.
3. The item is scanned using predefined settings from the OneTouch
software. To change OneTouch settings, see “Selecting New
OneTouch Scan Settings” on page 39.
4. A window shows the image as scanning is in progress. Then, when
scanning is finished, the image is sent to the Destination
Application selected in the OneTouch settings. In the following
example, the Destination Application is the PaperPort desktop.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
CHECK OR CHANGE SCAN SETTINGS BEFORE SCANNING
Press the button on the side of the scanner.
The OneTouch Panel opens with the description of the current
settings for the scanner.
The icon indicates the Destination
Application, in this case PaperPort.
for scanning.
The OneTouch Properties window also opens so you can choose
new settings before scanning. Use this window to select a new
Destination Application, file format, and so forth. See “Selecting
New OneTouch Scan Settings” on page 39 to modify the settings.
Note: You can also check the scan settings from the OneTouch Panel,
if it’s open. See the next section, “The OneTouch Panel” for more
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE ONETOUCH PANEL
31
Use the OneTouch Panel when you want to change the scan settings or
reset the scanner’s hardware properties. If AutoLaunch is off, you can
also scan from the OneTouch Panel. See the section, “Scan from
OneTouch when AutoLaunch is Off” on page 158.
1. To open the OneTouch Panel, press the button on the side of the
scanner, or click the OneTouch icon.
The OneTouch Icon.
2. The OneTouch Panel opens with the details of the current settings.
3. Click the green arrows at the top left of the Panel to switch between
the panel’s Detail View and Hardware View.
The Detail View.
The Hardware View.
■ The Detail View shows the icon of the Destination Application,
plus the current scan settings. Right-click on the icon to open the
OneTouch Properties window.
■ The Hardware View shows the scanner connected to your
computer. Right-click on the scanner icon to open the Hardware
Properties window. Clicking (not right-clicking) the scanner icon
also toggles back to the Detail view.
4. To close the Panel, click the close button at the top right.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
THE ONETOUCH PROPERTIES WINDOW
The OneTouch Properties window lists available scan settings and is
where you select new settings. It also contains special scanning features
such as scanning and burning to a CD, scanning and converting text
directly into an HTML web page, and scanning with Optical Character
Recognition (OCR) which turns a scanned image into text you can edit.
To open the OneTouch Properties window using either of the following
methods:
■ Press the button on the side of the scanner.
■ Click the OneTouch icon at the bottom right of the screen, then
right-click the PaperIn icon.
The OneTouch Properties window opens and shows the current options
selected for your scanner.
The description on the OneTouch Panel shows
which options are selected on the window.
In this example:
The Destination Application is PaperPort.
The Configuration being used for scanning is
US Letter Document (Fax Quality).
The Format for the scanned item will be PDF.
Note: Some of the options on the OneTouch Properties Window (and
other OneTouch windows and dialog boxes) may be “grayed out” and
are not available. Grayed out options are not appropriate for your
Visioneer Strobe XP 220 scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE ONETOUCH PROPERTIES WINDOW
33
Select Destination—The list of Destination Applications that can open
to display the scanned image. To configure the list of available
applications, click the Options tab at the top of the dialog box and
select the desired options. See “Selecting Options for the OneTouch
Properties Window” on page 35 for more information.
To make sure all your computer’s Destination Applications are linked to
OneTouch 4.0, click the Refresh button.
Select Configuration—The list of available scan configurations. A
configuration’s basic settings include: scanning mode, resolution (dpi),
page size, brightness (Br), and contrast (Cr). To see a selected scan
configuration’s settings, click its icon. Click the icon again to close the
detailed information.
Click the icon of a selected
configuration
to view its settings.
These icons next to the scan configurations indicate the scanning mode.
Color
Black and White
Grayscale
Configure Before Scan
Note: Use Configure Before Scan if you want to set the scanning
mode manually before scanning. See “Configure Before Scan” on
page 95.
You can also click the Edit button or double-click a configuration to see
more detailed information about it.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Select Format—A set of file formats for the scanned image. The
formats are based on the type of Destination Application you select.
This example shows the formats that apply to Microsoft Outlook.
The icon names indicate their file types. See “Selecting Format
Options” on page 51 for more about the formats.
Options tab—Switches to the view for choosing options related to the
selected Destination Application. Click the PaperIn tab to return to the
previous view without closing the window.
Refresh button—Updates the links between OneTouch 4.0 and
compatible Destination Applications on your computer.
Important: If you install new software that can be used as a
Destination Application, click the Refresh button to link the new
software will not be listed as a Destination Application.
Properties” on page 41
New/Copy/Edit/Delete buttons—Click New or Copy to add new
scan configurations to the list. Click Edit or Delete to change or remove
them. See the sections “Creating a New Scan Configuration” on page 74
and “Editing or Deleting Scan Configurations” on page 93.
OK/Cancel/Apply buttons—OK accepts any changes and closes the
window. Apply accepts any changes but leaves the window open so you
can continue making additional changes. Cancel closes the window
without accepting any changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE ONETOUCH PROPERTIES WINDOW
35
SELECTING OPTIONS FOR THE ONETOUCH PROPERTIES WINDOW
The OneTouch Options determine the types of Destination
Applications available on the window, as well as the location of the files
of your scanned items.
To select options:
1. Open the OneTouch Properties window and click the Options tab.
Options tab.
2. Select options as described below.
Show All Destinations—This option selects all the Destination
Application categories. The list of Destination Applications
available will include all the applications on your computer that fall
into these categories. The list also includes printers and other
devices connected to your computer so, for example, you can scan
an item and have it printed immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Select Destinations—Select this option to individually choose the
types of applications to include in the list of Destination
Applications. Check the boxes for the type of application to
include.
■ Document Management includes PaperPort and other
applications for processing and keeping track of your scanned
documents.
■ Image Editors include Microsoft Paint and other drawing and
graphics applications.
■ Text Editors include Microsoft Word and WordPad, Microsoft
Excel, and other word processing and spreadsheet applications.
scanned documents to text that you can edit.
■ PDF applications are for documents scanned to PDF format.
■ Storage and CD-R/W is for either storing scanned documents
in a folder, or sending them to a CD burner to create a CD
containing the scanned documents. See “Transferring Scanned
Documents to Storage” on page 107 and “Scan and Burn to a
CD” on page 100 for details.
your printer or fax software for faxing.
■ Sti event forwarding is for using another application’s interface
for scanning. The OneTouch Event Forwarding dialog box opens
so you can select which application to use to continue scanning.
See “Scanning with Event Forwarding” on page 103 for details.
3. After selecting a new category of Destination Applications, click the
PaperIn tab to see which ones are added to the list. Click the
Options tab again to return to the options window if you want to
change your selections and choose other options.
Show Progress Window—Select this option to display the progress
window of the document during scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE ONETOUCH PROPERTIES WINDOW
37
Create copies of scanned documents—Sometimes the image of a
scanned document is only saved as a temporary file until its
Destination Application is finished using it. In those cases you may
want an additional, permanent copy saved on your hard drive.
For example, if you scan a picture to an email application, the
scanned image is saved as a temporary file, then attached to the
email, and the email is sent. Later, the temporary file of the scanned
picture is deleted. The same situation may occur when you scan
directly to a printer or scan to a fax application. After a scanned
item is printed or faxed, its temporary file is deleted. However, by
can choose to save permanent copies of the scanned items on your
hard drive.
The copies will be saved in the folder specified in the Folder Copy
Options section (see the description below and the figure on page
91).
This option is not available if either the Document Management
or Storage and CD-R/W options are selected because, by default,
file copies for those types of Destination Applications are already
automatically saved in the folder for copies.
For that reason, this option is not available if the Destination
Application is PaperPort because it is a Document Management
application.
Likewise, the option is not available if the Destination Application
is set as Transfer to Storage because it uses Storage and CD-R/W
software.
Folder Copy Options—This section of the dialog box sets the
location for copies of your scanned documents and how you want
to group them.
Click the Browse button and find the folder for the copies. Select
the grouping option for the documents. Group by type arranges the
scanned documents by the type of file, such as .doc or .jpg. If you
also want to group them by date you can choose the week and
month options.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
The following example shows the folders when the selections are
Group items by type and Group items by month.
4. Click Apply and then click the PaperIn tab to see the new settings
on the OneTouch Properties window.
5. Click OK to save the options and close the window.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
39
SELECTING NEW ONETOUCH SCAN SETTINGS
The OneTouch settings consist of a Destination Application, a Scan
Configuration, and a Document Format. The OneTouch Properties
window is where you select these three elements.
Select a format
for the scanned
image.
Select a configuration
for scanning the item.
Selectasoftwareapplication
as the destination to send
scanned documents.
To select new settings for the scanner:
1. From the Select Destination list, select the application where you
want documents sent when scanning is finished.
See “Selecting Options for the OneTouch Properties Window” on
page 35 to display a full list of the Destination Applications that
you can use with the scanner.
Note: If you select a word processing program such as Microsoft
WordPad or Microsoft Word and a format that can be used for OCR
(such as TEXT or RTF), the text in scanned images is automatically
converted to word processing text. See “Scanning with Optical
Character Recognition (OCR)” on page 57 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
2. From the Select Configuration list, select a scan configuration.
To scan in color, select one of the configurations indicated by the
small color icon, such as the Color Document configuration.
To create your own scan configurations see “Creating a New Scan
Configuration” on page 74.
3. Select a Format option.
The available options apply to the Destination Application you
select. For example, if you select Microsoft Word as the Destination
Application, the available formats are for text, such as .txt and .rtf.
However, if you select Microsoft Paint as the Destination
Application, then the available formats are for graphics, such as
.bmp, and .jpg.
Note: If a format is listed as n/a, that means the text format is not
available for that Destination Application.
4. Click OK to accept the changes and close the window.
To accept the changes but keep the window open to work with
other features, click Apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
41
SETTING DESTINATION APPLICATION PROPERTIES
The different types of Destination Applications have various properties
that you can select.
1. On the OneTouch Properties window, click a Destination
Application.
2. Click the Properties button.
ClickaDestination
Application.
Click the Properties
button.
A OneTouch 4.0 Link Properties dialog box opens for the type of
Destination Application you selected, and the available options are
for that type of application.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
PAPERPORT PROPERTIES
These properties apply to PaperPort, and are for designating the folder
to receive your scanned items.
1. Select the PaperPort folder where you want the file of the scanned
image to be located.
2. Click OK.
3. Click OK or Apply on the OneTouch Properties window.
When PaperPort opens after you finish scanning, the thumbnails of
your scanned documents are on the Desktop in that folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
43
TEXT DOCUMENTS PROPERTIES
These properties apply to Microsoft Word, Microsoft Excel®, and the
other applications indicated by their icons in the list. The properties
apply to the Optical Character Recognition (OCR) settings for the
applications.
1. Click in the OCR settings boxes for the options you want.
The options will apply to all the applications in the group.
Always send a file, even when no text was found—The scanned
file is sent to the OCR reader even if the image does not appear to
contain text. This could occur if you scanned a photograph with
the file format set to a text format.
Show message if text recognition failed—A message will open on
the screen if the OCR reader does not detect text in the image.
2. To add another application to the list, click the Add Application
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
The Add Text Based Link dialog box opens.
3. Click Browse to find the application you want to add to the list.
When you select the application using the Browse button, steps 1
and 2 on the dialog box are automatically filled in, and the
application icon appears in step 3.
4. Select the icon in Step 3 of the dialog box. That is the icon that will
appear in the OneTouch Destination List.
5. In step 4 of the dialog box, select the file formats that the
application will accept.
Refer to the documentation you received with the application to see
which text formats the application accepts.
The options you select at step 4 determine the format icons in the
OneTouch Properties window for that group of applications.
6. Click the Add button.
7. Click OK or Apply on the Link Properties window.
8. Click Refresh on the OneTouch Properties window.
9. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
45
IMAGE DOCUMENTS PROPERTIES
These properties apply to Microsoft Paint and other image processing
applications.
1. Click in the Color document handling settings boxes for the
options you want.
The options will apply to all the applications in the group.
Convert Bitmaps using Screen Resolution—Use this option to
ensure that an image will fit on the computer’s screen. When a
computer screen is set to a lower resolution, bitmap images with a
higher resolution may be too big to fit on the screen. Converting
the bitmap image to match the screen resolution ensures that the
image fits on the screen.
Convert Bitmaps to JPEG—JPEG files can be compressed to
produce smaller file sizes and, therefore, shorter transmission times.
Use this option to provide that compression capability to image
files.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
2. To add another application to the list, click the Add Application
button.
See the steps on page 43 to add an application to the list.
3. Click OK.
4. Click Refresh on the OneTouch Properties window.
5. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
47
STORAGE PROPERTIES
These properties apply to the special Destination Application named
Transfer to Storage, indicated by the folder icon. This Destination
Application is designed for archiving documents with your scanner.
When you scan with Transfer to Storage as the Destination Application,
the scanner sends the scanned image directly to the default folder at
C:\Documents and Settings\<your user name>\My Documents\My
OneTouch Archive\PDF Documents without first opening it in an
application. The file will be named with the current date. The Storage
Properties dialog box is where you can change the storage location on
your computer’s hard drive, and can also change the names of the
folders used to store the files.
1. Click the Storage Layout options you want.
All documents are in the root—The scanned documents are saved
in the root of the folder specified in the Storage Location.
Documents are put into folders by month, week, or type—
Folders are created based on your selection (month, week, or type)
and the scanned documents are saved in those folders. New folders
are created for each month and week so you can keep track of when
you scanned the documents.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
2. Click the Browse button to specify the location to store the
scanned documents, or type a location directly into the box.
If you are scanning to a shared network drive, it must be a mapped
drive. For more information about mapped drives, see your
network administrator.
3. If you have a CD burner attached to your computer, the option
Show message when ready to burn 5" CD (700MB), should also
be selected so you will see a message when it’s time to click the Burn
to CD button.
4. Click OK on the Link Properties window.
If a CD burner is attached to your computer, and your computer is
running Windows XP or Vista, you can also use this dialog box to start
the Burn to CD process. See the section “Scan and Burn to a CD” on
page 100.
CD options are not shown on the dialog box.
You can also set up multiple configurations to store scanned items in
separate locations. See “Storage Options (Archive)” on page 91 and
“Scanning to Multiple Folders” on page 110.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
49
EMAIL PROPERTIES
These properties apply to email applications so you can specify the
folder for documents you want to attach to an email message. Microsoft
Outlook® will accept direct attachment of documents to a blank email
message as soon as scanning is finished, but other email applications
may not. If you’re using one of those applications, such as America
Online® (AOL), you need to know which folder contains the scanned
documents so you can manually attach them to your email messages.
1. Click the Browse button under Folder for storing attachments
and choose a folder for your email attachments.
2. If you are using AOL on your computer, and the folder name for
AOL is incorrect, click its Browse button and find the correct AOL
folder.
For scanned images to be auto-attached to a blank email address,
you must have the specific folder location AOL uses to find the
attachments. Please contact AOL for more information about the
folder location in which AOL stores attachments.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
3. If you need to change your email client, or any other internet
options, click the Internet Options button.
The Windows Internet Options Control Panel opens. Click the
Programs tab and choose a new email client from the Email list.
These are the standard Windows Internet options. Please see your
Windows documentation for more information about Internet
options. If you are using AOL, please see the AOL user manual for
making changes to the Internet options applicable to AOL. Click
OK to close the Internet Options Control Panel.
4. Select the options for color document handling.
Convert Bitmaps using Screen Resolution—Use this option to
ensure that an image will fit on the computer’s screen. When a
computer screen is set to a lower resolution, bitmap images with a
higher resolution may be too big to fit on the screen. Converting
the bitmap image to match the screen resolution ensures that the
image fits on the screen.
Convert Bitmaps to JPEG—JPEG files can be compressed to
produce smaller files sizes and, therefore, shorter transmission
times. Use this option to provide that compression capability to
image files.
5. Click OK.
6. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
51
SELECTING FORMAT OPTIONS
The Format options that you select determines the file format of the
scanned document. Appropriate format options are file types available
for the type of Destination Application selected.
The available options are for images and text.
Image Formats.
Text Formats.
The Text Formats are for text file types. The names of the formats
indicate their file types. See “Text Formats” on page 53 for details.
IMAGE FORMATS
Select an image file format for photos, artwork or other documents that
you want to save as images. BMP and TIFF are standard image file
formats generally used if you want to do additional image processing,
such as photo touch-up or color correction. Both of those file formats
tend to be larger than the JPEG format.
Because JPEG image files can be reduced in size, the JPEG format is
often used for images on web pages, or if file size might be a problem
when electronically sending the files. JPEG files are reduced in size by
lowering their image quality, and you can select the degree of quality for
your scanned images from the JPEG file format icon.
The PDF format is often used to create images of text pages. You may
want to select PDF as the format when scanning text pages that do not
require OCR processing or other processing. The PDF format is also
Download from Www.Somanuals.com. All Manuals Search And Download.
52
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
used to put multi-page documents on web sites as PDF-readable files.
As with the JPEG option, the PDF format can be reduced in size or
quality.
To select a JPEG or PDF file size:
1. Select JPG or PDF as the format.
2. Right-click on the JPG or PDF icon.
A menu opens.
3. Choose the file size/image quality option for your scanned images.
Minimize Size—Smallest file size, lowest image quality.
Normal—Medium file size, some loss of image quality.
Maximize Quality—Largest file size, no loss of image quality.
Your selection pertains only to the Destination Application
currently selected on the OneTouch Properties window. Other
Destination Applications that have JPG or PDF selected as the Page
Format are not affected, so you can set the JPEG or PDF file size
and image quality independently of the Destination Applications.
4. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
53
Selecting the text format option also selects OCR processing as an
automatic step for scanning. Therefore, when you scan a document
with the text format selected, the text portions of the document are
automatically converted to editable text. See “Scanning with Optical
Character Recognition (OCR)” on page 57.
Select a text format for documents with text or numbers, such as a
business letter, report, or spreadsheet. The text format icon may have
additional file formats available, depending on the Destination
Application you select.
The specific file format is the file name extension on the text format
icon.
The specific text format; this example is
for Rich Text Format (.rtf).
As you select Destination Applications that are text applications, the
text format icon changes to match the file type of the application. In
some cases, the Destination Application supports several file types, and
you can right-click on the icon to choose the particular file type for that
application.
To select a file type for the text format:
1. Select the Destination Application.
2. Right-click on the text format icon.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Example menu for the TEXT format
when the Destination Application is
Microsoft Word.
Example menu for the TEXT format
when the Destination Application is a
Storage location.
3. Choose the file type that you want for the text format.
Your selection of a file type pertains only to the Destination
Application currently selected on the OneTouch Properties
window. Other Destination Applications that have a text option
selected as the Page Format are not affected.
Simple Text—The .txt file format. Text with no formatting; used
by the standard Microsoft Notepad application.
Rich Text Format—The .rtf file format. Text that retains
formatting when converted. Available with Microsoft WordPad and
Word.
Word Document—The .doc file format used by Microsoft Word.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
55
Comma Delimited—The .csv file format; used for database or
spreadsheet data with fields separated by commas. When the
document is converted into editable text by the OCR process, the
fields are maintained so you can copy and paste them to a database
or spreadsheet application.
Excel Spreadsheet—The .xls file format used by Microsoft Excel.
HTML Document—The .htm file format used to create web
pages.
Searchable PDF—The .sPDF file format used by Adobe Acrobat.
This format converts scanned text into PDF with text search and
OCR capabilities.
Normal PDF—The .nPDF file format used by Adobe Acrobat.
This format also converts scanned text into PDF with text search
and OCR capabilities, plus you can edit the text in an nPDF image
if you have a PDF editing program.
Additional options are available on the menu for the sPDF and nPDF
text formats. The three image quality settings are:
Minimize Size—Smallest file size, lowest image quality.
Normal—Medium file size, some loss of image quality.
Maximize Quality—Largest file size, no loss of image quality.
The Use MRC option is a special processing procedure for documents
scanned with the PDF format:
Use MRC—MRC stands for Mixed Raster Content. MRC is an
advanced technique for optimizing the image quality of scanned
documents. Without MRC, the scanned image is produced using a
single process to capture and display the image on the computer
screen, even if the document contains both text and graphics. With
MRC, the image is produced using separate processes for text,
graphics, and other elements on the document page. The result is
clearer graphics and sharper text characters. Scans with Use MRC
selected may take slightly longer to complete the processing. Select
Download from Www.Somanuals.com. All Manuals Search And Download.
56
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Use MRC for documents with harder-to-read text or lower-quality
graphics to get the best possible scan output image. The Use MRC
4. To change the OCR settings, choose OCR Options.
The OCR Options provide a series of selections for the OCR
feature when you scan text. See “Selecting OCR Options” on
page 58 for details.
Note that the OCR Options settings apply to all Destination
Applications. If you change them for one Destination Application,
those changes apply to the others as well.
5. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
57
SCANNING WITH OPTICAL CHARACTER RECOGNITION (OCR)
Optical Character Recognition (OCR) converts text and numbers on a
scanned page into editable text and numbers. You can then work with
the text and numbers to edit, spellcheck, change font or type size, sort,
calculate, and so forth.
Note: Visioneer recommends that all OCR processing use the original
factory settings for OCR scanning that came with your scanner. When
scanning with other settings, use at least 300 dpi for the resolution. If
the original documents are of poor quality and have small type, 400
dpi can be used as the maximum resolution.
To scan with OCR:
(TEXT, RTF, DOC, XLS, HTML, nPDF, or sPDF).
2. If you want to change the OCR Options for processing and
recognizing text before scanning, right-click on the format icon and
choose OCR Options. See the next section, “Selecting OCR
Options” on page 58 for details,
3. Scan the document.
Your scanned pages appear in the Destination Application with
their text ready for editing and other text processing.
Note: OCR scanning is also for spreadsheets so you can work in
Microsoft Excel (or other spreadsheet applications) with the figures
and text from the original spreadsheets.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
SELECTING OCR OPTIONS
The software you installed for your scanner includes a set of advanced
OCR options integrated with OneTouch 4.0.
Note: The OCR options apply globally to all the OneTouch
Destination Applications that perform OCR. For example, if you
select the OCR options for Adobe Acrobat, they also apply to
WordPad.
Note: The PaperPort and OmniPage applications that you received
with your scanner also have OCR capabilities. See their user’s guides
for more information about their OCR features.
To select OCR options available from OneTouch 4.0:
1. Open the OneTouch Properties window.
2. Select a Destination Application that has one of the text format file
types as the page format, such as Microsoft Word or WordPad.
3. Right-click on the page format icon to see the menu.
4. Choose OCR Options from the menu.
The OCR Properties window opens with the OCR tab selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
59
THE OCR TAB
The options shown on the OCR tab window are for spellchecking
scanned text, replacing missing or unrecognized characters, and setting
the speed and quality levels of the OCR processing.
1. Choose the options you want from the OCR window.
Languages in Document—Click on the language(s) in list that
correspond to the languages in the documents to be scanned. You
can click on multiple languages. These are the languages that will be
recognized during the OCR process. For faster and more reliable
language recognition, select only the languages in the documents.
The languages are in alphabetical order. Type the first letter of a
language’s name to jump to its section in the list.
Use languages and dictionaries to improve accuracy—Select this
option to automatically check the validity of the recognized words.
An OCR engine looks at each letter or symbol on the page
individually, then “guesses” what the letter or symbol is based on
the shape. Therefore, the OCR engine may have more than one
guess for a particular letter or symbol, a “best guess”, a “second-best
Download from Www.Somanuals.com. All Manuals Search And Download.
60
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
guess”, and so on. This option tells the OCR engine to look
through the dictionary to validate its best guess for the letters in
that word; if its best guess is not in the dictionary, it checks for the
second-best guess, and so on.
For example, if the word “house” appears in the original document
but the OCR engine is 75% sure that the “o” is actually an “a”, the
finished document would have the word “hause”. Turning this
option on tells the OCR engine to look at the other letters in the
word, check to see which version of the word is in the dictionary,
and output the correct word “house” in the final document.
The OCR engine does not automatically correct misspelled words
that were present in the original document.
When dictionaries are selected, the terms in those dictionaries are
used to check the spelling. If this is option is not selected, User
Dictionaries and Professional Dictionaries cannot be selected.
User Dictionary—A user dictionary is your personal dictionary
with words that you want the OCR engine to reference for better
accuracy when converting the document into editable text. For
example, if you scan documents with highly technical terms or
acronyms not found in typical dictionaries, you can add them to
your personal dictionary. You can also add names that you expect to
be in the documents too. This way, as the OCR process recognizes
each letter or symbol, there is a higher chance that the technical
term or name will be correctly spelled in the final document. You
can create multiple user dictionaries. See the section “Creating Your
Own Dictionaries” on page 62.
Click the menu arrow and select a user dictionary from the list.
If you select [none] as the user dictionary, the text will be validated
using the terms in the dictionaries for the selected languages, as well
as any professional dictionaries if they are selected.
The label [current] is next to the currently-select user dictionary.
Professional Dictionaries—These are legal and medical
dictionaries containing highly specialized words and phrases. The
options are: Dutch Legal, Dutch Medical, English Financial,
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
61
English Legal, English Medical, French Legal, French Medical,
German Legal, and German Medical. Select the appropriate
dictionary for the OCR engine to use to validate the scanned text.
Reject Character—This is the character that the OCR process
inserts for an unrecognizable text character. For example, if the
OCR process cannot recognize the J in REJECT, and ~ is the reject
character, the word would appear as RE~ECT in your document.
The ~ is the default reject character.
Type the character you want to use in the Reject Character box. Try
to choose a character that will not appear in your documents.
Missing Character—This is the character that the OCR process
inserts for a missing text character. A missing text character is one
that the OCR process recognizes, but cannot represent because that
character is not available for the selected language. For example, if
the document contains the text symbol “Ç” but the OCR process
cannot represent that character, then every place “Ç” appears, the
OCR process substitutes the missing character symbol. The caret
(^) is the default symbol for the missing character.
Type the character you want to use in the Missing Character box.
Try to choose a character that will not appear in your documents.
Recognition Quality—Drag the slider to the left or right to set the
degree of accuracy for the OCR process. The higher the accuracy,
the longer the OCR process requires to complete. For clean, highly-
legible documents, you can set the recognition quality to a lower
level to produce results more quickly.
2. Click OK or Apply.
These options will now apply to the OCR processing when you
select any text format as the page format.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
CREATING YOUR OWN DICTIONARIES
You can create multiple dictionaries for your personal use. For example,
you might have different dictionaries for separate work projects,
especially if each project uses different acronyms and terminology.
To create a personal dictionary:
1. Open any word processing program, such as Microsoft Word,
WordPad, or Notepad.
2. Create a new document in the word processing program.
3. Type each word you want in your new dictionary, followed by a
carriage return. Make sure to spell the words correctly as they will
be used for spellchecking.
Here is an example of what the text file might look like:
Visioneer
OneTouch
OmniPage
wysiwyg
jpeg
bmp
sPDF
nPDF
Note: The file does not have to include every word you want in the
dictionary. You will be able to edit the list later. In fact, the file does
not have to contain any text at all, and you could add the words
using the editing options. However, if the list of words is long, it’s
usually faster to type them in the word processing program. Note
also that the words do not need to be alphabetized.
4. Save the document in the .txt format and give the file the name that
you want for the dictionary. For example, give it the name
USERDIC1.
5. Now open the OCR Options window.
6. On the OCR Options window, click the button next to the menu
arrow.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
63
7. The User Dictionary Files window opens and shows the available
dictionaries.
MyDictionary is an example of a user dictionary.
8. Click Add New.
The Add New User Dictionary window opens.
9. Click the drop-down arrow for Files of type and choose Text Files
(.txt).
Download from Www.Somanuals.com. All Manuals Search And Download.
64
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
10. Select the file you just created for your user dictionary and click
Open.
In the example above, the file is named USERDIC1.
11. The text file now appears on the list of user dictionaries that you
can use for spellchecking.
12. Select a dictionary and click Set As Current to set it as the current
dictionary for spellchecking. The label [current] is added to the
name.
If you don’t want to use any user dictionaries for spellchecking,
click [none] at the top of the list.
To remove a dictionary from the list, select it and click Remove.
This only removes the dictionary from the list. It does not affect the
original text file you created with the list of words.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
65
EDITING USER DICTIONARIES
Once a dictionary has been added to the list of user dictionaries, its list
of words can be edited.
To edit a user dictionary:
1. On the Add New window, select the dictionary to edit and click
Edit.
The Edit User Dictionary window opens. It lists the words
currently in the dictionary. The following example shows the words
OmniPage and OneTouch are in the user dictionary named
MyDictionary.
2. To add a new word to the list, type it in the box for User Word and
click Add. If the word includes any spaces before or after it, those
spaces are removed and the word is added to the list.
To delete a word from the list, select it and click Delete.
If a word in the list is misspelled, delete it, then re-type the word
correctly in the User Word box and click Add.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
3. To import a list of words from another text file, click Import.
The Import Contents of User Dictionary window opens.
4. Select the file that has the words you want to add to your user
dictionary.
Importing will add the entire list of words in a file to the user
dictionary.
5. Click Import. The file’s words will be added to your user dictionary
list.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
67
6. To export a user dictionary so it can be used by another program,
select the dictionary on the User Dictionary Files list and click
Export.
The Export User Dictionary window opens.
7. Select the dictionary file to export and click Save.
The file is exported as a formatted dictionary with the .ud filename
extension so it can be opened by other programs.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
THE FORMAT TAB
The options on the Format tab window are for setting the input and
output formats for the scanned documents.
1. Click the Format tab and choose the options you want for both the
input and output formats.
Input Format Options
■ Automatic—Choose this option to let the OCR process
determine the format of the pages. Typically you select this
option when the document has different or unknown types of
layouts, pages with multiple columns and a table, or pages
containing more than one table. The OCR process will then
determine if text is in columns, an item is a graphic or text, and
tables are present.
■ Single Column no Table—Choose this option if the document
contains only one column of text and no tables. Business letters
are normally in this form. You can also use this option for
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
69
documents with words or numbers in columns if you do not
want them placed in a table or decolumnized or treated as
separate columns.
■ Multiple Columns, no Table—Choose this option if some
document pages contain text in columns and you want it kept in
separate columns, similar to the original layout. If table-like data
is encountered, it is placed in columns, not in a gridded table.
■ Single Column with Table—Choose this option if your
document contains only one column of text and a table. The
table will be placed in a grid in the Destination Application you
have selected. You can later specify whether to export it in a grid
or as tab-separated text columns.
■ Spreadsheet—Choose this option if the entire document consists
of a table that you want to export to a spreadsheet program, or
have treated as a table. No flowing text or graphics will be
detected.
Output Format Options
■ Automatic—The document will be formatted as close to its
original as possible. The OneTouch software will adjust its
settings to the most appropriate for the document being scanned
in order to match your selected output format. The output
quality will be maximized and the processing time minimized.
■ No Formatting (NF)—The document will be plain text, one
column, left-aligned in a single font and font size. You can then
export the plain text to nearly all file types and target
applications.
■ Retain Fonts and Paragraphs (RFP)—This output format
retains the font and paragraph styling, including graphics and
tables without columnized text, but does not retain layout
formatting. If the document is being scanned as an Excel
spreadsheet, each detected table or spreadsheet becomes a
separate worksheet, while other content is placed on the last
worksheet.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
■ Flowing Page (FP)—This format preserves the original layout of
the pages, including columns. This is done wherever possible
with column and indent settings, but not with text boxes or
frames. Text will then flow from one column to the other, which
does not happen when text boxes are present.
■ True Page (TP)—This output format uses absolute positioning
on the page to keep the original layout of the pages, including
columns. This is done with text, picture and table boxes and
frames. True Page is the only choice for documents scanned with
the PDF format. It is not available for the TXT, RTF, CSV, or
XLS formats.
■ Spreadsheet—This output format produces results in a tabular
form with each page becoming a separate worksheet. The
worksheets can then be opened in a spreadsheet application. The
Spreadsheet output option is only available for documents
scanned with the XLS format.
2. Click OK or Apply.
These options will now apply to the OCR processing when you
select any text format as the page format.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
71
SCANNING WITH SPDF OR NPDF AND SEARCHING FOR TEXT
Searchable PDF (sPDF) and Normal PDF (nPDF) are special forms of
an Adobe PDF file. sPDF converts scanned text into the PDF format
with text search and OCR capabilities. nPDF has those same features,
plus you can edit the text in an nPDF image if you have a PDF editing
program.The two PDF formats can also produce images with different
image quality, so you may want to experiment with them to determine
which is better for your scanned documents.
To scan with sPDF or nPDF:
1. Open the OneTouch Properties window.
2. Select a Destination Application that uses a text format as the page
format. For example, select your email application as the
Destination Application.
3. Right-click on the text format icon.
4. Choose the Searchable PDF or Normal PDF option for the page
format.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Note: Not all Destination Applications have the sPDF and nPDF
options. Microsoft Word, for example, does not have them as scanning
options.
The settings now show your page format selection.
The page format
icon is now set to
sPDF.
5. Right-click on the text icon again and choose one of the image
quality settings, Minimize Size, Normal, or Maximize Quality.
6. Choose a Scan Configuration.
7. Click Apply or OK.
8. Now when you scan with that Destination Application selected, the
scanned document will be in the sPDF or nPDF format that was
selected for it.
Note: The Transfer to Storage selection for a Destination Application
also has the sPDF and nPDF options. That means you can scan and
store items directly to a server in these formats.
9. To search for the text, open Adobe Acrobat Reader or Adobe
Acrobat.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING NEW ONETOUCH SCAN SETTINGS
73
10. From the Adobe Acrobat File menu choose Open, and open the file
you just scanned.
11. From the Adobe Acrobat Edit menu choose Find.
The Find dialog box opens.
12. Enter the text you want to find, and click the Find button.
See the Adobe Acrobat user manual for more about finding text in a
PDF file, or about editing PDF text.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
CREATING A NEW SCAN CONFIGURATION
The scan configurations are where you select the scanning resolution,
brightness, mode (color, black&white, or grayscale), and a number of
other settings.
The Scan Configurations.
The Lock Icon.
Click New to create a
new Scan Configuration.
Note the lock icon on the preset configurations. Although you can
unlock and edit the preset configurations, we recommend that you leave
them locked, and only add new configurations. That way, you will
always have the original factory-set configurations available. New
configurations will be unlocked until you manually lock them.
To create a new configuration:
1. Open the OneTouch Properties window and make sure the
PaperIn tab is selected.
2. Scroll through the applications in the Select Destination list and
click the type of application for which you want to create a new
scan configuration.
When you create a new scan configuration, it will appear for the
same types of Destination Applications. For example, if you create a
new configuration for image editor applications, that new
configuration also appears for any other image editors, but not for
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
75
text editing applications. Thus, you can create specific sets of scan
configurations for specific functions and they appear only when
appropriate.
3. Click the New button.
If you want to start from the settings of another configuration,
select the configuration, then click the Copy button.
The Scan Configuration Properties dialog box opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
SCAN SETTINGS
1. On the Scan Configuration Properties dialog box, type a name.
Type a new name for
the configuration.
If the configuration is
locked, click the lock
to unlock it. The icon
becomes a key as
Select the scan mode
and drag the slider to set
the resolution.
shown here.
Drag the sliders to set
the Brightness and
Contrast.
Tip: If you’re going to set up the new configuration for special types
of scans, include that in the name, such as “Scan for Dark Print” as
a reminder that you designed it for items with dark print.
Note: If you select a printer or other device in the Select Destinations
list, the dialog box may have an additional Device Settings tab for
setting specific options for the particular device.
2. Select scan settings for the new scan configuration.
Mode—Select a scanning mode:
■ Black&White to scan in black and white. For example, letters
and memos are usually scanned in black and white. This scan
mode produces the smallest file size.
■ Grayscale to scan items such as documents containing drawings
or black and white photographs. The scanning produces an
image of up to 256 shades of gray.
■ Color to scan color photographs and other color items. Color
scans have the largest file size.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
77
Resolution—Drag the slider to the right or left to adjust the dots
per inch (dpi) of the resolution. The maximum resolution is 600
dpi; the minimum is 50 dpi. The higher the dpi setting, the sharper
and clearer the scanned image. However, higher dpi settings take
longer to scan and produce larger files for the scanned images.
Brightness and Contrast—Sometimes an item is scanned with the
brightness and contrast set too light or too dark. For example, a
note written with a light pencil may need to be scanned darker to
improve legibility.
Brightness refers to the lightness or darkness of the image. Contrast
is the range between the darkest and lightest portions of the image.
The greater the contrast, the more the difference between the
lighter and darker shades in the image.
Drag the sliders to the right or left to adjust the brightness and
contrast of the scanned image. The Contrast setting does not apply
to the Black&White mode.
3. If you want to lock the configuration, click the Key icon to change
it from a Key to a Lock.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
PAGE SETTINGS
1. Click the Page Settings tab to select page settings.
Click to toggle
between inches
and millimeters.
Size—Click Standard, click the menu arrow and choose a page size
from the list, or click Custom and enter the horizontal and vertical
page dimensions in the boxes. The maximum size is 8.5" by 14".
The units of measurement can be inches or millimeters. Click the
name of the units, inches or millimeters, to toggle between them.
Improvements and Settings—Only the options that apply to the
selected Destination Application are available.
■ AutoCrop to Original—Select this option to let the scanner
automatically determine the size of the item being scanned. For
example, if you scan a 5" x 7" inch photo, the scanner will
determine the size of the photo.
When using the AutoCrop to Original option, make sure to use the
alignment arrows on the scanner so the page is inserted straight.
Note: Also make sure to set the page size larger than the item that
you’re scanning so the Autocrop process will have sufficient room on
the page to crop the image properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
79
Note: The VRS Settings window also has an option to autocrop a
document. If you select that setting, then AutoCrop to Original is also
selected so you’ll know that option is active. To turn off autocropping,
uncheck the option on the VRS Settings window.
■ Reduce Moire Patterns—Moire patterns are wavy, rippled lines
that sometimes appear on the scanned images of photographs or
illustrations, particularly newspaper and magazine illustrations.
Selecting Reduce Moire Patterns will limit or eliminate moire
patterns in the scanned image. This option is only available for
the Grayscale or Color Mode at 300 dpi or less.
■ Straighten Image—Select this option to let the scanner
automatically determine if a page is skewed, and then straighten
its image. The scanner detects page edges and can sense when the
page is fed through at an angle. However, if the page is fed
through at too great an angle the image may not straighten
correctly. In that case, re-scan the page using the alignment
arrows to feed the paper in straight.
Note: The VRS settings also have an option to straighten an image. If
you select the VRS setting, then Straighten Image is also selected so
you’ll know that option is active. To turn off image straightening,
uncheck the option on the VRS settings.
■ Invert Image—Only available for Black&White Mode, this
option reverses the black and white of an image.
Original Image.
Inverted Image.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
■ Color Filter—Color filter is the ability of your scanner to
automatically remove a color from a scanned item. For example,
if you are scanning a letter with a red watermark, you can choose
to filter out the red so the scanned letter just shows the text and
not the red watermark. Color filter applies to Black&White or
Grayscale Mode.
The original with a red
watermark over black text.
The scanned item with the
red filtered out.
2. Click OK or Apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
81
VRS SETTINGS
1. Click the VRS Settings tab.
Click the drop-down
arrow to choose the
type of VRS settings.
A Note About VRS™: The scanner software you installed includes a
version of the Kofax® VirtualReScan® (VRS) application known as
Visioneer OneTouch with Kofax VRS Technology. This application has
a set of features for improving and enhancing the quality of scanned
documents, especially documents that would usually produce poorer
quality images. For example, the AutoBrightness option analyzes the
document to determine if it’s too light or dark to produce a clear, legible
image, or if the background and highlighted areas of the image are
indistinct. AutoBrightness then automatically adjusts the brightness.
Scan configurations with VRS options work with OneTouch scan
settings to produce the best quality images.
Note the button, Get VRS Pro. The software version you received with
the scanner is the standard VRS application and provides the Basic
Features. If you would like to purchase VRS Professional to be able to
use the advanced features of VRS, click the Get VRS Pro button.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
2. Click the drop-down arrow to choose the type of VRS settings you
want to use for the new scan configuration. The options are:
■ Do not use VRS processing—Scanning will not use the VRS
processing.
■ Default settings—Automatically selects the AutoCrop and
AutoDeskew options because your Visioneer Strobe XP 220
scanner can use these two VRS options with any scan mode
(Black&White, Grayscale, and Color).
The Basic Features are:
■ AutoCrop—Determines the size of the item being scanned and
produces an image of the same size. For example, if you scan a
postcard-sized document, the resulting image will be the size of
the postcard. This option overrides the page size setting.
■ AutoDeskew—Detects the edges of a document and determines
if they are straight or skewed. If the page is skewed, the image
will be adjusted so it is straightened. If the page is inserted at too
great an angle, however, the page will back out of the scanner. In
that case, feed the paper in straight and re-scan the image.
■ AutoBrightness—Sets the brightness to achieve the best balance
between the document’s background, foreground, and
highlighted areas. For grayscale images, lighter areas become
whiter and darker areas become blacker. AutoBrightness is not
available for Color scan configurations.
■ Edge Cleanup—Sometimes a scan image will have a thin black
outline around its edges. This VRS option replaces those black
outlines with white. Edge Cleanup only applies if AutoCrop and
AutoDeskew are selected so the software can determine where
the edges are located. Therefore, selecting Edge Cleanup will also
select AutoCrop and AutoDeskew. Edge Cleanup is only
available for Black&White scan configurations.
■ DeSpeckle—Speckles are small spots on an image that the
scanner interpreted as a valid part of the document. For example,
an irregularity in the paper, or a small wrinkle, or the holes where
a staple was removed may show up as speckles on the scanned
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
83
image. The DeSpeckle option identifies these spots and removes
them. DeSpeckle is only available for Black&White scan
configurations.
■ Get VRS Pro—Click this button to link to the VRS Web Site. You
can then upgrade your scanner’s VRS software to include the VRS
Professional Features shown at the bottom of the window.
The Professional Features are:
■ Advanced Clarity—Produces a clear, legible image even for
documents that have complex or textured backgrounds, such as
graph paper, blueprints, and security paper. The Advanced
Clarity option identifies the text and drawings in the foreground
and produces a scan image that keeps the background from
obscuring them. Advanced Clarity is only available for
Black&White scan configurations.
■ AutoOrientation—Recognizes text on the page and rotates the
image 90, 180, or 270 degrees so the text is right side up. The
AutoDeskew option must also be selected with the
AutoOrientation option.
■ Auto Color Detect—Determines if a document contains color
or not and produces the appropriate scanned image. Typically,
Auto Color Detect is used when you have a stack of pages to
scan, some color and others not. Instead of you having to change
the scan settings from Color to Black&White and back again,
the scanner can choose the correct settings automatically.
■ Background Smoothing—Sometimes a document with a
background color on the page will produce a scanned image that
has small imperfections in the color. This option recognizes a
document’s background color and makes sure it is a smooth,
solid color.
3. Click OK or Apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
VRS SCAN CONFIGURATIONS
When you select VRS options for a scan configuration, the OneTouch
Panel and the OneTouch Properties window both show the VRS icon as
a reminder.
The VRS icon on the top of the OneTouch
Panel and on the scan configuration remind you
that the scan will use the VRS settings.
The summary of the scan settings
also indicates VRS settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
85
ADVANCED SETTINGS
1. Click the Advanced Settings tab.
The options of the Advanced Settings tab are for the Color or
Grayscale scanning mode.
Saturation is the strength or purity of a color, hue is the color your
eyes see as reflected from the image, and gamma controls the
brightness of the midtones of the color.
2. Drag the sliders to the left and right to change the color settings. As
you do, the image changes to show the effects of the new settings.
3. Click OK to save the new configuration.
It will now appear in the list of Scan Configurations on the
OneTouch Properties window for the appropriate Destination
Applications.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
DEVICE SETTINGS
A Device Settings tab appears on the Scan Configurations dialog box
when your selected Destination Application sends the scanned image to
a printer, fax application, or other device. You use the options on the
Device Settings tab to select settings for the device.
1. Click on the Device Settings tab.
Fit to page, reduce image if necessary—If the scanned image is
too big to be printed or faxed on a single page, the image will
automatically be reduced to fit the page.
Actual size, crop image if necessary—If the scanned image is too
big to be printed or faxed on a single page, the image will
automatically be cropped around its edges to fit on the page.
Center image on page—The image will be printed in the center of
the page instead of at the top right corner.
Maintain aspect ratio—The aspect ratio is the length-to-width
relationship of the image’s dimensions. Select this option so the
image’s relative proportions remain constant.
AutoRotate image for best fit—If the image is a Landscape format
and the device is printing in the Portrait mode, or vice versa, rotate
the image to fit on the page.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
87
Collate copies—If you are printing more than one page, collate the
copies. Enter the number of copies in the Copies box.
Advanced—Click to see additional settings for the device. The
dialog that opens is specific to the device. For example, if the device
is your printer, the dialog box is your printer’s setup settings.
2. Click OK or Apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
SHAREPOINT SETTINGS
Your scanner’s software includes a link to Microsoft’s SharePoint
application so you can automatically store scanned documents on a
server set up to run SharePoint. When you select SharePoint as the
Destination Application, the Scan Configurations dialog box will
include the SharePoint tab.
SharePoint icon.
Typically, you use SharePoint to help organize and keep track of your
scanned documents, search for them, and to share scanned documents
with groups of people. Thus, when documents are scanned to
SharePoint everyone with the appropriate access to the SharePoint server
will be able to find the scanned documents and work with them. This is
an especially effective means of business-wide collaboration and sharing
work using your scanned documents.
1. Click on the SharePoint tab.
SharePoint URL, Folder, User Account, Password—These items
are the settings needed to identify and access the SharePoint server.
Please see your System Administrator for these settings.
Filename Format—Click the drop-down arrow to choose the file
name format of the scanned documents when they’re stored on the
SharePoint server.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
89
The file name formats are:
{USER}, {seq}.{ext}—File names begin with your user name
(that you use to sign on to the SharePoint server), followed by
the sequential number of the scanned document, and then the
extension for the type of file. Examples: JohnDoe0001.pdf,
JohnDoe0002.pdf, JohnDoe0003.pdf... and so on.
{USER}, {Y.M.D H.M.S}.{ext}—File names begin with your
user name, followed by the date and time (Year Month Day
Hour Minute Second) when the document was scanned, and
then the extension for the type of file. Examples: JohnDoe
08.22.07 09.35.16.pdf, JohnDoe 08.22.07 09.35.45.pdf,
JohnDoe 08.22.07 09.36.10.pdf... and so on.
{Y.M.D H.M.S}.{ext}—File names start with the date and time
(Year Month Day Hour Minute Second) when the document
was scanned, followed by the extension for the type of file.
Examples: 08.22.07 09.35.16.pdf, 08.22.07 09.35.45.pdf,
08.22.07 09.36.10.pdf... and so on.
{prefix}, {seq}.{ext}—File names begin with a prefix you
specify, followed by the sequential number of the scanned
document, and then the extension for the type of file.
Examples: Invoice0001.pdf, Invoice0002.pdf,
Invoice0003.pdf... and so on. In these examples the prefix is the
word “Invoice”.
Filename Prefix—Click in this box and type the prefix to use if
you’re using the {prefix}, {seq}.{ext} format. In the previous
examples, the word typed in this box would be “Invoice”. Using
a prefix is a good way to identify scanned documents that apply
to the same subject. For example, the prefix might be: the
docket number of a legal case, the code name of a research and
development project, or the name of a site where a set of
scanned pictures were taken.
Count—The number of files the SharePoint link has transferred to
the SharePoint server. Each time a new document is sent to the
server the count increases by one. The Count is also the sequence
number ({seq}) used in the file name formats described above. To
Download from Www.Somanuals.com. All Manuals Search And Download.
90
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
reset the count, click in the count box and type a 1. You can also
start the count at a different number. For example, to start the
count at 100, click in the box and type 100.
2. Click OK or Apply.
Note: The sequence numbers include zeros at their beginning—such
as 0001, 0002, 0003—to improve the appearance and alignment of
the filenames when they appear in columns. The initial zeros also help
you find a filename quickly when the names are sorted.
can set up separate scan configurations for each type of document to
send them to a server. Similarly, if you scan to multiple SharePoint
servers, you can set up separate scan configurations for each server. To
create new scan configurations, see the section “Creating a New Scan
Configuration” on page 74.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
91
STORAGE OPTIONS (ARCHIVE)
A Storage Options tab is on the Scan Configurations dialog box when
the selected Destination Application is set as Transfer to Storage. You
use the options on this tab to select where you want to save your
scanned items for storage when scanning with that particular Scan
Configuration.
override the storage options that apply to the Storage Properties. This
means that you can create separate Scan Configurations to store
scanned items at various locations in addition to the main location set
by the Storage Properties. See “Storage Properties” on page 47 and
“Transferring Scanned Documents to Storage” on page 107 for more
details.
1. Click on the Storage Options tab.
2. Click the Storage Layout options you want.
All documents are in the root—The scanned documents are saved
in the root of the folder specified in the Storage Location.
Documents are put into folders by month, week, or type—
Folders are created based on your selection (month, week, or type)
and the scanned documents are saved in those folders. New folders
Download from Www.Somanuals.com. All Manuals Search And Download.
92
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
are created for each month and week so you can keep track of when
you scanned the documents. Type refers to the file type selected as
the Format on the OneTouch Properties window.
By default, the location of the archived documents is at
C:\Documents and Settings\<your user name>\My
Documents\My OneTouch Archive then in a folder based on your
selection for the Storage Layout. For example, if the file type is
TIFF, and you select Documents are put into folders by type, the
default location of scanned archive documents is at C:\Documents
and Settings\<your user name>\My Documents\My OneTouch
Archive\TIFF Documents.
3. If you want to store your archive documents in some other location,
click the Browse button to specify the new location.
4. Click OK or Apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
93
EDITING OR DELETING SCAN CONFIGURATIONS
Note: Your scanner comes with a number of configurations pre-set at
the factory. To ensure that your scanner will always have a set of
correct scan configurations, do not delete the pre-set configurations.
We also recommend that you keep those configurations locked so they
are not inadvertantly deleted. That way, you will always have the
factory-settings available. If you do delete or edit them, and want to
get the factory pre-sets back again, you will need to uninstall then re-
install your scanner.
To edit or delete a scan configuration:
1. Open the OneTouch Properties window.
2. Select the scan configuration you want to edit or delete.
Select the configuration to
edit or delete. It must be
unlocked, as indicated by
not having a lock displayed
here.
3. To delete the configuration, click the Delete button.
Note: If the Delete button is not available, the selected configuration
is locked and cannot be deleted. You must first click the Edit button
and unlock the configuration, as explained in the next steps.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
4. To edit the configuration, click the Edit button.
The Scan Configuration Properties dialog box opens for that
configuration.
You can make changes to a configuration, but for the changes to be
saved, the configuration must first be unlocked.
Click the lock icon to unlock the configuration. Clicking it toggles
between locking and unlocking the configuration. The Key icon
indicates the configuration is unlocked.
Click the Key/Lock
icon to toggle between
locked and unlocked.
5. Edit the settings and click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
95
CONFIGURE BEFORE SCAN
You can set up the scanner so that, when you insert a page or click the
icon on the Button Panel, a different scanning interface opens before
the scanning starts. You can then use the interface to select new settings
or scanning options. To set up the scanner for this capability, you select
Configure Before Scan as its Scan Setting.
Choosing Configure Before Scan simply opens either the TWAIN or
then use the interface to change the Resolution, Scan Mode, and other
type and to the same Destination Application already selected in the
OneTouch Properties window for that button. Please see “Scanning
from the TWAIN Interface” on page 119 for detailed instructions about
scanning with the TWAIN interface or “Scanning from the WIA
Interface” on page 136 for detailed instructions about scanning with the
WIA interface.
The option Configure Before Scan can be used when you want to scan
multiple pages and have them appear in one file. The OneTouch file
formats TIFF and PDF support multiple page files.
To set Configure Before Scan:
1. Open the OneTouch Properties window.
2. Select the scan configuration Configure Before Scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and choose
the interface touse
for scanning.
3. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes
page 119.
WIA—The Windows Image Acquisition Interface (WIA) opens for
you to configure the scanning. The WIA option is only available if
your computer is running Microsoft Windows XP or Windows
Vista. See “Scanning from the WIA Interface” on page 136.
4. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
97
TO SCAN USING CONFIGURE BEFORE SCAN
The following example shows how to use Configure Before Scan to scan
from the TWAIN Interface. The steps to scan from the WIA Interface
are similar.
To scan using Configure Before Scan:
1. Align the document between the alignment arrows and insert it,
face up, into the page feed slot.
2. The scanner rollers will grab the top edge of the paper, but then the
scanning will stop while the TWAIN Interface opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
3. Select the settings you want such as Color Mode to scan in color,
resolution in dpi, and brightness. See the section, “Using the
TWAIN Interface to Scan” on page 123 for a description of all the
TWAIN scanning options.
4. Click the Scan button when you’re ready to scan. The rollers will
feed the page through the rest of way and scan it with the new
settings.
TO SCAN MULTIPLE PAGES
You can use Configure Before Scan to create multi-page documents
from individually scanned pages.
Note: Using the Configure Before Scan option to scan multiple pages
does not apply for page formats BMP and JPG. Please make sure the
Configure Before Scan page format on the OneTouch Properties
window is set to TIFF, PDF, or one of the Text formats.
To scan multiple pages:
1. Insert the page into the scanner.
2. When the TWAIN Interface opens, select the appropriate scan
settings for your document.
3. Click the Scan button on the TWAIN Interface.
4. After the Scanning Progress bar closes, insert the next page and
click the Scan button again.
5. Continue until you have scanned all the pages in your multi-page
document.
6. When you’re finished scanning, click the Done button on the
TWAIN Interface.
7. All the scanned pages will be sent to the Destination Application set
in the OneTouch Properties window. If the Destination Application
is PaperPort, the pages will be grouped as a single stack of pages.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A NEW SCAN CONFIGURATION
99
CANCELING A CONFIGURE BEFORE SCAN
1. Click Cancel in the scanning progress window.
2. The following window will open asking if you want to cancel the
entire job.
Yes—Scanning stops and all pages scanned in this batch, up to this
point, will be deleted. The TWAIN interface will close and you can
restart your scan from the beginning.
Choose Yes if the TWAIN scan settings are incorrect for your
current scanning batch.
For instance, the Scan Mode is Black & White but you want to scan
your documents in color. Choose Yes to delete any scanned pages,
then start over and select the correct Scan Mode before scanning.
No—Scanning stops, but all pages scanned in this batch, up to this
point, are not deleted and the TWAIN interface remains open. You
can insert a new page, adjust the TWAIN settings for it, then click
the Scan button in the TWAIN interface to continue scanning. At
the end of the scanning batch, all pages from the first portion of the
scan and second will be sent to the Destination Application.
Choose this option if, for instance, you have been scanning a Black
& White document but you want to insert a color page into it.
Instead of having to re-scan the entire stack, you can stop the
current scan, change the Scan Mode from Black & White to Color,
then restart the scanning without losing the pages already scanned.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
SCAN AND BURN TO A CD
If you have a CD burner attached to your computer, you can scan
directly from your scanner onto a CD. This feature is available only on
computers running Windows XP or Vista.
To scan and burn to a CD:
1. Put a blank CD into your computer’s CD Drive.
2. Open the OneTouch Properties window.
3. Select Burn to CD as the Destination Application.
have a CD burner attached to your computer, but you do not need
to have a CD in the burner to select the destination.
4. Choose a Format and a Scan Configuration.
Please see the note on page 102 to make sure you choose the proper
configuration.
5. Click OK or Apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCAN AND BURN TO A CD 101
6. Start scanning a page.
When scanning is finished, a bubble message on the screen tells you
that files are waiting to be burned to the CD.
7. Open the OneTouch Properties window and make sure that the
Burn to CD Destination Application is still selected and click the
Properties button.
The OneTouch 4.0 Link Properties window opens.
8. Make sure a CD is in the CD burner.
9. Click the Burn to CD button.
The CD burner begins and your scanned documents are written to
the CD.
Note: Until you click the Burn to CD button the scanned files are
stored in your computer at C:\Documents and Settings\<your user
name>\Local Settings\Application Data\Microsoft\CD Burning.
This is where Windows XP or Vista stores all files waiting to be
burned to a CD by the automatic CD writing wizard. If other files are
also waiting in this location, they will get written with the OneTouch
files on the CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Note: When scanning items to burn to a CD, you should always use
one of the factory-set default configurations, or a custom
configuration specifically set up for CD burning. The default
configurations are already set up to send the scanned images to the
proper storage location where the Windows XP and Vista CD writing
wizard can find the files to burn to the CD. Likewise, when you create
a custom configuration for CD burning, the OneTouch software will
automatically make sure the storage location is correct.
the new configuration. You won’t need to select a storage location
because it will be correctly preset for you by the OneTouch software.
Note however, that if you have created other custom configurations
with different storage locations (for example, see “Scanning to
Multiple Folders” on page 110), do not use them for the Burn to CD
Destination Application. Otherwise, the Windows XP and Vista CD
writing wizard will not be able to find the images to burn onto the
CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING WITH EVENT FORWARDING 103
SCANNING WITH EVENT FORWARDING
If you want to specify an application to use for scanning at the start of
the process, you can use event forwarding. The scanner will feed in the
first page, but will then stop until you select the application to use. After
you select the application, its interface will open and you can use it to
continue with the scanning.
To scan with event forwarding:
1. Open the OneTouch Properties window.
2. Select Still Image Client as the Destination Application.
If Still Image Client is not listed as a Destination Application, click
the Options tab, select Sti event forwarding, then click Apply and
click the PaperIn button again.
Note that you cannot choose a format for this option because the
actual Destination Application is not selected until after the scanner
feeds in the first page of your document.
3. Choose a Scan Configuration.
4. Click Apply or OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
104
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
5. Start scanning a page.
A dialog box opens for you to select the application to use for
scanning.
6. Select the application in the box and click OK.
Now the application you selected opens and you can continue the
scanning from that application’s TWAIN interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING AN HTML WEB PAGE FROM YOUR SCANNED DOCUMENTS 105
CREATING AN HTML WEB PAGE FROM YOUR SCANNED
DOCUMENTS
If you scan a document, whether a single page or multiple pages, you
can have the pages converted directly to HTML-formatted pages for
posting directly to your web site. Those pages are then viewable by
visitors to your web site without the need for any internet plug-ins or
other special processing. This is, essentially, from your scanner to a web-
ready format in one automatic step.
To scan and create an HTML web page:
1. Open the OneTouch Properties window.
2. Select Microsoft Explorer as the Destination Application.
If Microsoft Explorer is not listed as a Destination Application,
click the Options tab, select Text editing applications (i.e. Word),
then click Apply and click the PaperIn tab again.
3. Choose HTML as the Format.
Choose HTML
Download from Www.Somanuals.com. All Manuals Search And Download.
106
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
4. Choose a Scan Configuration that has the settings for the image on
the HTML page.
For example, if you want the image to be in color on the HTML
page, choose a color configuration.
5. Click Apply or OK.
6. Scan your document.
When scanning is finished, the document is first converted to
editable text using the OCR process, and then is converted into an
HTML format. Microsoft Internet Explorer then opens showing
your converted page.
Note: Depending on the complexity of the document, its conversion
to the HTML format may take a few moments.
7. Choose the Internet Explorer Save As command, give the page a
name, and save it in the location you use for web page files.
You may also want to write down the address shown in the Address
bar so you’ll know where to find your new HTML page later on.
8. You can now use Microsoft Internet Explorer or other application
to post the document to your web page as you would any other
HTML page.
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSFERRING SCANNED DOCUMENTS TO STORAGE 107
TRANSFERRING SCANNED DOCUMENTS TO STORAGE
With the Transfer to Storage scanning process, you can scan documents
and save them in a folder in one step. The process is ideal for archiving
documents without having to manually save or process them in any
other way. If you choose a text format for the file format, the documents
are also automatically converted by the OCR process into editable text
and numbers before being stored.
To scan and transfer to storage:
1. Open the OneTouch Properties window.
2. Select Transfer to Storage as the Destination Application.
click the Options tab, select the option Storage and CD-R/W,
then click Apply and click the PaperIn tab again.
3. Choose a text format as the Format if you want the OCR process to
convert scanned text to editable text. See the next section “To Use
OCR Before Transferring to Storage.”
Choose a text format to
have the OCR process
convert text to editable
text before the scanned
documentsarestoredin
their archive location.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
4. Choose a Scan Configuration for the documents you want to
archive.
5. Click Apply or OK.
6. Now scan the documents.
Your scanned pages are stored in the location that you specified on
the OneTouch 4.0 Link Properties window.
Your scanned documents
will be stored at this location.
Note: The Storage Location shown in the example above is the
default place where your scanned documents are stored if you haven’t
created any new scanning configurations or selected a new storage
location. If you create a new scan configuration that has its own
storage location and you use that configuration to scan, your scanned
documents will be stored at the new location instead of the default.
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSFERRING SCANNED DOCUMENTS TO STORAGE 109
TO USE OCR BEFORE TRANSFERRING TO STORAGE
If the documents you want to transfer to storage are text documents or
spreadsheets, you can have them converted by the OCR process prior to
being stored.
1. Open the OneTouch Properties window.
2. Select Transfer to Storage as the Destination Application.
3. Choose a text format as the file format.
4. Right-click on the text format icon and choose the file format for
the scanned documents.
5. Choose a Scan Configuration.
6. Click Apply or OK.
Now when scanning with Transfer to Storage as the Destination
Application, the documents are saved as OCR-converted text in the
selected file format.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
SCANNING TO MULTIPLE FOLDERS
When archiving documents with the Transfer to Storage option, you
can scan them to multiple folders. For example, one folder might be for
“Business Receipts,” a second folder might be for “Personal Receipts,”
and a third folder might be for “Annual Receipts.”
To scan to multiple folders, you create multiple scan configurations with
Transfer to Storage as the Destination Application. Scan one set of
documents using the scan configuration with the appropriate storage
location for that set. Then switch to another scan configuration and
scan the next set of documents to store them in their folder.
Setting up multiple folders for transfer to storage:
1. Using Microsoft Windows, create the folders that you want to use
for storing scanned items. Note that you can also create the folders
later while creating the new scan configurations.
2. Open the OneTouch Properties window.
3. Select Transfer to Storage as the Destination Application.
4. Click the New button.
Select Transfer to Storage.
Click the New button.
The Scan Configuration Properties dialog box opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING TO MULTIPLE FOLDERS 111
5. To help you remember which folder it is, give the new
configuration a name that indicates the folder name, such as
“Storage for Business Receipts.”
6. Click the Scan Settings, Page Settings, and Advanced Settings
tabs, and select the settings you want.
7. Click the Storage Options tab.
8. Click the Browse button.
9. Select the folder you created for storing the scanned documents.
If you haven’t created the folder yet, you can click the Make New
Folder button and type the name for the new folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
10. Click OK. The selected folder will now be set as the Storage
Location, such as “Business Receipts.”
11. Click OK. The new configuration is now listed as a Transfer to
Storage configuration.
12. Repeat the process to create additional new configurations, such as
one named “Storage for Personal Receipts.”
13. Make sure to designate separate folders as the Storage Locations for
each new configuration.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING TO MULTIPLE FOLDERS 113
You will now have multiple configurations set up for the Transfer to
Storage destination, and each configuration scans documents to a
separate folder.
Thenewconfigurations
apply to the Transfer to
Storage Destination
Application.
Scan to multiple storage folders:
1. Open the OneTouch Properties window.
2. Select one of the configurations you created for storage.
3. Click Apply or OK.
4. Scan the first set of documents.
The documents are scanned to the folder specified for the
configuration.
5. When scanning is finished, return to the OneTouch Properties
window and select the other configuration you created for storage.
6. Click Apply or OK.
7. Scan the next set of documents.
When scanning is finished, the two sets of documents are stored in the
two separate folders.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
When selecting the storage location for scanned documents, you can
select a local folder, or a folder on a server or mapped drive. You select a
mapped drive using the Browse button.
1. See “Scanning to Multiple Folders” on page 110 or “Transferring
Scanned Documents to Storage” on page 107 for the steps to select
the Transfer to Storage options.
On either the OneTouch 4.0 Link Properties window, or from the
Scan Configuration Properties window, click the Browse button.
The Browse For Folder window opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSFER DOCUMENTS TO A SERVER OR MAPPED DRIVE 115
2. Select a storage location on the mapped drive or server for the
scanned documents.
Servers and mapped drives are represented by an icon that indicates
its network connection.
Select a mapped drive or
server as indicated by the
icon.
3. Click OK.
Now when you scan using Transfer to Storage as the Destination
Application, the documents are stored on the server or mapped
drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
116
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
CHECKING THE HARDWARE
1. Right-click on the OneTouch icon and choose Show Hardware
from the pop-up menu.
You can also click the Hardware icon at the top of the OneTouch
Panel.
The Hardware icon.
If the Hardware View of the panel is open you can also right-click
on the Visioneer Strobe XP 220 icon.
The Hardware Properties dialog box opens and shows information
about your Visioneer Strobe XP 220 scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECKING THE HARDWARE 117
2. Click the Properties button.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
The Interface information refers to the USB port where your scanner is
connected. The scanner automatically detects the type of USB port and
displays the information here. The example above shows a scanner
connected a USB 2.0 High Speed port. Your scanner can also connect to
a USB 1.1 Full Speed port.
1. The option Enable the generation of events when paper is inserted
into the scanner turns on your scanner’s “AutoLaunch” feature. The
scanner senses when an item is inserted into the page feed, grabs the
item, and feeds it in automatically.
If this option is not selected, the scanner will still grab the item, but
will then wait to start scanning until you click the PaperIn button
on the OneTouch panel, or start the scan using one of the other
scanning interfaces.
If the “AutoLaunch” option is selected, the Paper pickup delay also
becomes available. The Paper pickup delay is the amount of time
you want the scanner to wait until it feeds the item into the scanner
to start scanning.
2. To set the Paper pickup delay, click the drop-down arrow and
choose from the list of options. The settings are in milliseconds, so
1250 ms is 1.25 seconds.
3. The option Enable the detection of excessive document skew.
Backout the document if this occurs, is for sensing if a document is
being fed into the scanner skewed to such an extent that the scan
image will be degraded.
If this option is selected and you insert a document skewed, the
scanner will start to scan, but then scanning will stop and the
document will back out of the page feed so you can re-insert it
straight.
4. Click OK to enable the new settings.
Device.
Note: The Calibrate and Clean buttons are for maintaining your
scanner in optimum operating condition. See “Maintenance” on
page 141 for the steps to calibrate or clean your scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE 119
Scanning from the
TWAIN Interface
SCANNING FROM THE TWAIN INTERFACE
In addition to scanning from the OneTouch software, you can scan
from TWAIN software. The PaperPort software that you received with
your scanner uses the TWAIN interface for scanning. This scanning
method is particularly helpful when you’re using PaperPort to file and
save scanned items, or if you want to preview an image and adjust
scanning settings prior to scanning.
A Note About Your Scanner and the TWAIN standard: TWAIN is a
widely recognized procedure that software applications use to receive
images from scanners, digital cameras, and other digital devices. The
PaperPort software you received with your scanner uses the TWAIN
standard, and this guide shows how to scan with it. But you can also
open the same TWAIN interface from many other graphics and
imaging applications and scan from them as well. Because the TWAIN
interface is the same regardless of the software you use to open it, you
can still use the instructions in this User’s Guide for scanning with your
Visioneer Strobe XP 220 scanner. To access the TWAIN interface from
other software, please refer to their user’s guides, then return to this
User’s Guide for the steps to scan.
from the OneTouch software. If the OneTouch configuration you’re
using to scan is set to Configure Before Scan, and the selected option
is TWAIN, the TWAIN interface opens right away without opening
PaperPort or any other TWAIN-compliant software first. See the
section “Configure Before Scan” on page 95 to select this option.
Download from Www.Somanuals.com. All Manuals Search And Download.
120
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
ACCESSING THE TWAIN INTERFACE FROM PAPERPORT
The instructions in this section are for using PaperPort to access the
TWAIN interface to scan.
To access the TWAIN interface from PaperPort:
1. On the Windows taskbar, click Start, point to Programs, point to
ScanSoft PaperPort, then click PaperPort.
The PaperPort desktop opens with its Folders Pane. The Folders
Pane shows folders for organizing your scanned images.
Scan or Get
Photo icon.
Folders Pane.
2. Click the Scan or Get Photo icon on the PaperPort command bar
to switch to the Desktop’s Scan Pane.
Note: The first time you open PaperPort, no scanner will be listed in
the Scan Pane. You must select the scanner to use. Later on, however,
you can skip that step unless you want to use another scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE TWAIN INTERFACE FROM PAPERPORT 121
The Folders Pane is replaced by the Scan Pane.
Scan pane.
Click Select to see the
available scanners.
If this Scan button is not active when you select a scanner, see the section on
page 129 to set up your scanner to work with PaperPort.
3. If no scanner is shown on the Scan Pane, the Available Scanners
window opens. If a scanner already listed in the Scan Pane, but you
want to choose another one, click Select to open the window.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
4. Select TWAIN: Visioneer Strobe XP 220.
The WIA: Visioneer Strobe XP 220 option is for using the WIA
interface.
5. Click OK.
A Confirm Selection message box opens.
6. Click OK on the message box.
Note: Please wait a few moments for your selection to become
active. This delay only occurs the first time you select a scanner
while PaperPort initializes it. Later on, the scanner initializes
immediately when you select it.
Note: If the Scan button at the bottom of panel is not available when
you make a selection, then your scanner needs to be set up to work
with PaperPort. See the section, “Setting Up Your Scanner to Work
with PaperPort” on page 129.
7. Make sure the option Display scanner dialog box is selected.
If this option is not selected, the TWAIN interface will not open
when you click the Scan button. Instead, the items are scanned
with the PaperPort scan profile selected on the Scan Pane.
8. Click the Scan button on the Scan Pane.
The TWAIN interface opens. You’re ready to start scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TWAIN INTERFACE TO SCAN 123
USING THE TWAIN INTERFACE TO SCAN
The following figure shows the TWAIN interface for scanning from
PaperPort and other applications that use the TWAIN standard. Note
that some of the options on the window may not be available, and will
be greyed out if they are not appropriate for your scanner.
The options for the Visioneer Strobe XP 220 TWAIN interface are:
■ Mode—Select a scanning mode:
Black&White to scan in black and white. The scanning pixels
are all the same size and are either black or white. Use this
setting for letters, memos, and other black and white material.
This scan mode produces the smallest file size.
Greyscale to scan items such as documents containing drawings
or black and white photographs. The scanning produces an
image of up to 256 shades of gray. You can also scan a color
document to turn its colors into gray shades. The file size is
about one third that of a color scan.
Color to scan magazine articles, photographs, and other color
images in full color. Color scans have the largest file size.
Download from Www.Somanuals.com. All Manuals Search And Download.
124
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
■ Resolution—Drag the slider to the right or left to adjust the
dots per inch (dpi) of the resolution. The maximum resolution is
600 dpi; the minimum is 50 dpi. This option determines the
amount of detail you can see in the scanned image. The higher
the dpi setting, the sharper and clearer the scanned image.
However, higher dpi settings take longer to scan and produce
larger files for the scanned images. Usually the higher resolution
settings are used for precision work, such as photographs or fine
artwork.
■ Brightness and Contrast—Sometimes an image is scanned with
the brightness and contrast set too light or too dark. For
example, a note written with a light pencil may need to be
scanned darker to improve legibility. Increasing or decreasing the
brightness makes the scanned image lighter or darker. Contrast
refers to the difference between the lighter and darker portions of
the image. Increasing the contrast emphasizes the difference
between the lighter and darker portions, decreasing the contrast
de-emphasizes that difference. Contrast is used in conjunction
with brightness.
■ Deskew—Select this option to let the scanner automatically
determine if a page is skewed when inserted into the page feed,
and then straighten its image. The scanner detects page edges
and can sense when the page is fed through at an angle. However,
if the page is fed through at too great an angle, the page will back
out of the scanner automatically. In that case, feed the paper in
straight and re-scan the image.
■ AutoCrop to Original—Select this option to let the scanner
automatically determine the size of the item being scanned. For
example, if you scan a 5" x 7" photo, the scanner will determine
the size of the photo, and the scan area is the size of that photo.
When using the AutoCrop to Original option, always use the
alignment arrows on the scanner to align the page so it is not
skewed.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TWAIN INTERFACE TO SCAN 125
Note: Also make sure to set the page size larger than the item that
you’re scanning so the Autocrop to Original process will have
sufficient room on the page to crop the image properly.
■ AutoCrop to Length—Select this option to let the scanner
automatically crop the scanned document from the top to the
bottom edge of the page, affecting only the length of the
document. The width of the scan area is not affected. The scan
width is determined by the chosen page size.
■ Filter—The Filter is the ability of your scanner to automatically
remove a color from a scanned item. For example, if you are
scanning a letter with a red watermark, you can choose to filter
out the red so the scanned letter just shows the text and not the
red watermark. The Filter option applies to Black&White or
Greyscale Mode.
The original with a red
watermark over black text.
The scanned item with the
red filtered out.
■ Reduce Moire Patterns—Moire patterns are wavy, rippled lines
that sometimes appear on the scanned images of photographs or
illustrations, particularly newspaper and magazine illustrations.
Selecting Reduce Moire Patterns will limit or eliminate moire
patterns in the scanned image. This option is only available for
the Greyscale or Color Mode at 200 dpi or less.
Download from Www.Somanuals.com. All Manuals Search And Download.
126
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
■ Define page size—Click this option to activate the Define
button. Then click the Define button to see the Define page
size dialog box for selecting a specific page size.
Click Standard, click the menu arrow and choose a page size
from the list, or click Custom and enter the horizontal and
vertical page dimensions in the boxes. The maximum size is
8.5" x 14". The units of measurement can be inches or
millimeters. Click the name of the units, inches or mm
(millimeters), to toggle between them.
Click OK.
The currently selected page size appears in the middle of the
TWAIN interface on the lefthand side.
The Define page size option cannot be used with AutoCrop to
Length or AutoCrop to Original options.
■ AutoScan on document insertion—Your scanner includes
AutoLaunch technology that senses when an item is inserted into
the page feed and starts scanning immediately. Select this option
to turn on the AutoLaunch feature. The item is scanned with the
current scan settings on the TWAIN interface. If this option is
not selected, the scanner waits for you to click the Scan button.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TWAIN INTERFACE TO SCAN 127
9. When you’re ready to scan, align the document between the
alignment arrows, and insert it into the page feed face up.
10. Click the Scan button (if the AutoScan feature is not turned on).
The scanner starts scanning and a progress box shows the image.
11. Click the Done button on the TWAIN interface when the
scanning is finished, and then click Done on the PaperPort-Scan
window.
To scan additional pages, click Scan More Pages.
To scan the other side of a page, click Scan Other Side. The
TWAIN interface opens again. Flip the page over and click Scan on
the TWAIN interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
128
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
When scanning is complete, thumbnail images appear on the
PaperPort Desktop
A thumbnail image of the scanned item
appears on the PaperPort desktop.
GETTING HELP WITH THE PAPERPORT SOFTWARE
The PaperPort software includes a complete set of help topics that
answer questions about each feature of the software. To open the Help
Topics window, press the F1 key or choose PaperPort Help from the
Help menu.
You can also refer also to the PaperPort Getting Started Guide and
PaperPort User’s Guide on the CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP YOUR SCANNER TO WORK WITH PAPERPORT 129
SETTING UP YOUR SCANNER TO WORK WITH
PAPERPORT
On the PaperPort Scan Pane, when you selected a scanner from the
Available Scanners window, the Scan button at the bottom of the
panel should become active after approximately 5 to 10 seconds. If it
doesn’t, you need to set up your scanner to work with PaperPort.
If this Scan button is not active, you need to
set up your scanner to access PaperPort.
Note: Setting up your scanner is a one-time-only process for each
option listed in the Available Scanners window. Therefore, you may
have to set up your scanner once each for TWAIN: Visioneer Strobe
XP 220 and WIA: Visioneer Strobe XP 220. The setup process is the
same for each option. You will not have to set up the scanner again
unless you uninstall the scanner and PaperPort software, then re-install
them.
Download from Www.Somanuals.com. All Manuals Search And Download.
130
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
To set up your scanner to work with PaperPort:
1. On the TWAIN Scan Pane, click the Select button.
The Available Scanners window opens.
2. Select one of the scanner options, such as TWAIN: Visioneer
Strobe XP 220.
3. Click the Advanced setup button.
A window opens to begin the setup process.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP YOUR SCANNER TO WORK WITH PAPERPORT 131
4. Click Yes then click Next.
The next window offers you the option to run hardware
diagnostics.
5. Click Yes (recommended) then click Next.
The next window is for checking the connection between your
scanner and the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
132
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
6. Click Next.
After the Setup Wizard checks the connections, the next window is
displayed. It has a series of setup options, but only the Basic scan
test is necessary because your scanner was already tested when you
installed the OneTouch 4.0 software.
If other tests are checked, click in their boxes to uncheck them.
7. Click Next.
Although the next window instructs you to insert a page into the
scanner, do NOT insert the page yet. Because your scanner has its
AutoLaunch feature, if you insert the page now, it will scan before
the Scanner Setup Wizard is ready.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP YOUR SCANNER TO WORK WITH PAPERPORT 133
8. Without inserting a page in the scanner, simply click Next on the
window to proceed.
The TWAIN interface opens.
Note: If you are setting up your scanner for the WIA scanning
option, the WIA interface opens instead.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
9. Choose one of your documents to use for the setup and select the
the scan mode for it. For instance, if you want to use a color photo
for the setup, select the Color scan mode.
Note that the Scan button is not active yet and a message at the
bottom of the window tells you that no document is in the scanner.
10. Now insert a page into the scanner, face up. The scanner will grab
the page but will not start the scan yet. The Scan button on the
TWAIN interface will become active.
11. Click the Scan button on the TWAIN interface.
Scanning begins and the Setup Wizard runs the scan test. Then a
window opens that says “Basic scan test passed.”
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP YOUR SCANNER TO WORK WITH PAPERPORT 135
If the scanned image does not appear in the window, click Missing
Image. A window will open for you to retry the scan. Click Next,
then insert the page and click the Scan button on the TWAIN
interface again.
12. Click Next on the “Basic scan test passed” window.
The final Setup window opens to let you know the setup process is
finished.
13. Click Finish.
Your scanner is now set up for the scanning option you selected (in
the example above, it’s the TWAIN option) and the Scan button on
the PaperPort window will now become active.
Download from Www.Somanuals.com. All Manuals Search And Download.
136
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Scanning from the WIA
Interface
SCANNING FROM THE WIA INTERFACE
Microsoft Windows XP and Vista include their own scanning
interface—known as Windows Image Acquisition (WIA)—for
acquiring images from scanners, digital cameras, and other digital
devices.
This section shows how to use Microsoft Paint to scan using the WIA
interface, but you can use PaperPort and other Windows applications as
well.
Note: Scanning with the Windows Image Acquisition (WIA) is only
available if your computer is running Windows XP or Vista.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE WIA INTERFACE 137
To scan using WIA from Microsoft Paint:
1. On the Windows taskbar, click Start, point to Programs, point to
Accessories, then click Paint.
2. From the File menu choose From Scanner or Camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
138
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
The WIA scan window opens. Use this window to select scanning
options and start the scan process.
3. Click the button most appropriate for the item you’re scanning.
To scan with the Custom Settings option see the next section, “Fine
Tuning Your Scans”.
4. Align the document between the alignment arrows and insert it,
face up, into the page feed.
5. Click the Scan button.
6. The scanned images will appear in Microsoft Paint (or other WIA
application you’re using).
Download from Www.Somanuals.com. All Manuals Search And Download.
FINE TUNING YOUR SCANS 139
FINE TUNING YOUR SCANS
You can select new settings before you scan an item to fine tune exactly
how you want to scan it.
To select the scanner settings before you scan:
1. On the scan window, click Adjust the quality of the scanned
picture.
The Advanced Properties dialog box opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
140
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
2. Select the options for scanning.
Brightness and Contrast—Drag the sliders to the right or left to
adjust the brightness and contrast of the scanned image. The
Contrast setting does not apply to the setting Black and White
picture or text.
Resolution (DPI)—Click the menu arrow and choose the dots per
inch (dpi) of the resolution. The maximum resolution is 600 dpi;
the minimum is 50 dpi. The higher the dpi setting, the sharper and
clearer the scanned image. However, higher dpi settings take longer
to scan and produce larger files for the scanned images.
Picture type—Click the menu arrow and choose the most
appropriate type for the item you’re scanning.
3. Click OK.
The Custom Settings button is now set to scan with the options
you selected.
If you want to reset the settings and start over, click Reset.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECALIBRATING AND CLEANING YOUR SCANNER 141
Maintenance
This chapter contains information on recalibrating, cleaning,
troubleshooting, uninstalling, and scanner specifications.
RECALIBRATING AND CLEANING YOUR SCANNER
You calibrated your scanner during installation, but after many hours of
use you may find that scanned images may not be as sharp and clear as
when you began using the scanner. In that case, recalibration may solve
the problem.
If your scanned images have streaks, smudges, or dirt spots, you may
need to use the Cleaning Paper that you received with the scanner.
To recalibrate your scanner:
1. Move the scanner’s Paper Return into the Up position so the
calibration paper will feed straight through the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
142
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
2. Use any one of the following methods to start the recalibration or
cleaning:
■ Right-click on the OneTouch icon in the Windows Notification
Area (at the bottom right corner of the screen) and choose Show
Hardware from the pop-up menu.
The OneTouch Icon.
■ Click the small scanner icon on a OneTouch Panel, or right-click
the scanner icon on the OneTouch Hardware Panel to open the
Hardware Properties window right away.
Right-click this icon...
...or click this icon to open the Hardware Properties
window without having to choose from the menu.
■ If the TWAIN interface is open, click the scanner icon at the top
right corner of the window.
Click this icon.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECALIBRATING AND CLEANING YOUR SCANNER 143
3. The Hardware Properties window opens.
4. Click the Properties button
5. The Device Configuration Properties window opens and shows
the Device Settings. Note that the “Last calibrated” date is red,
indicating that calibration is now due.
Download from Www.Somanuals.com. All Manuals Search And Download.
144
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Note: The Device Configuration Properties window is also available
from the Windows Control Panel under Scanners and Cameras.
For Windows XP: Right-click on the Visioneer Strobe XP220 icon,
select Properties, then select Device Settings.
For Windows 2000: Select the Visioneer Strobe XP 220 icon, click
on the Properties button, then select Device Settings.
6. To recalibrate, click the Calibrate button.
The Calibration window opens.
7. To clean the scanner, click the Clean button.
The Cleaning window opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECALIBRATING AND CLEANING YOUR SCANNER 145
8. Insert the calibration page or cleaning page into the page feed.
Insert the calibration page in the direction of the arrows on the
page. Insert the long side of the cleaning page.
The scanner grabs the page and feeds it through the scanner.
Inserting the cleaning page.
Inserting the calibration page.
The scanner will automatically pass the calibration page or cleaning
page back and forth several times.
Do not remove the page until calibration is finished.
9. When calibration or cleaning is complete, close the Device
Configuration Properties window, and remove the calibration
page or cleaning page and replace it in its plastic bag.
Note: Do not discard the cleaning page. You can use it several times.
If additional cleaning is necessary, add a few drops of Isopropyl
alcohol (rubbing alcohol) to the cleaning page and use it again.
Note: If the calibration page is not available you can use a piece of
blank white paper as a substitute. However, calibration will not be as
precise as with the regular calibration page.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
TROUBLESHOOTING
In addition to the troubleshooting information contained in this
section, please see the Readme file on the installation CD. The Readme
file contains additional information that may help you diagnose
problems with the scanner.
If you try all the troubleshooting procedures described in this section
and in the Readme file, and the scanner still has problems, you may
have a malfunctioning scanner. Please see the technical support card
that you received with your scanner for technical assistance telephone
numbers. Also visit our web site at www.visioneer.com for additional
technical information.
Problem: The scanner won’t scan. What’s wrong?
Check for one of these possible problems:
• Are the cables loose or not plugged in securely? Inspect the cable
connections. Make sure the cables are plugged in securely.
• Did you restart the computer after installing the software? If you
didn’t restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
• Did you plug the scanner into a USB hub? If you’re using a USB
hub to connect the scanner, the hub must have its own power supply.
If the hub does not have its own power supply, plug the scanner into
a different USB port on the computer.
• Did you select another TWAIN source for scanning? If you use
multiple devices with your computer, you may have selected another
source for images. Start the PaperPort software and click the Scan
icon and then make sure TWAIN: Visioneer Strobe XP 220 is
selected as the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 147
Problem: The scanner icon disappeared from the Windows
Notification Area.
Check for one of these possible problems:
• Are the cables loose or not plugged in securely? Inspect the cable
connections. Make sure all cables are plugged in securely.
• Is the Power Supply plugged in? Make sure the Power Supply is
securely plugged into a working electrical outlet.
If the cables and Power Supply are plugged in correctly, try restarting
your computer.
Problem: During installation I got the error message: PaperPort
Installation is not complete. What do I do?
The installation procedure was not successful. You need to reinstall the
PaperPort software.
Problem: I got the error message: PaperPort cannot allocate enough
memory to perform internal critical operations. What do I do?
Close any other active applications so that additional memory is
available. If you click Continue, PaperPort moves the file to the
PaperPort data directory and renames the file with the prefix “bad”.
This allows you to recover the file later.
To recover the file, you can import it into PaperPort by using the Import
command in the File menu.
Problem: The installation will not complete successfully. If
installation finishes, the scanner’s OneTouch 4.0 options do not
seem to work properly. What do I do?
A likely cause is that some driver programs are already installed on your
and OneTouch options, and you need to remove those other drivers and
re-install your Visioneer Strobe XP 220 scanner. Please see the
documentation that you received with the other scanner for the steps to
remove its driver programs. You can also use the basic steps in the
section “How to Install Another Driver” on page 150, but instead of
Download from Www.Somanuals.com. All Manuals Search And Download.
148
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
uninstalling OneTouch 4.0, uninstall the other scanner’s driver
programs. After uninstalling the other scanner’s driver programs,
uninstall OneTouch 4.0 using the steps on page 149, then reinstall it.
Problem: The scanned images are of poor quality even after I
recalibrated and cleaned the scanner. What do I do?
The calibration procedure was not successful. You may have a defective
scanner. Please see the Technical Support Card that you received with
your scanner for the telephone number or email address to contact
Visioneer Technical Support.
Problem: If the USB cable is disconnected during a scan, the
scanner does not reconnect when the USB cable is plugged back in.
Unplug the power cable from the scanner, and then plug it back in.
If the scanner does not reconnect:
2. Restart your computer.
3. After the restart is complete, plug the power cable back in.
Problem: How do I uninstall PaperPort?
See the section, “How to Uninstall Your Scanner” on page 149.
Uninstalling does not delete your scanned items, and they remain in the
PaperPort Data folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO UNINSTALL YOUR SCANNER 149
HOW TO UNINSTALL YOUR SCANNER
To uninstall the Visioneer Strobe XP 220 scanner, remove the
OneTouch 4.0 scanner software first, then remove the PaperPort
software.
STEP 1: UNINSTALL THE ONETOUCH 4.0 SCANNER SOFTWARE
1. On the Windows taskbar, click Start, point to Settings, then click
Control Panel.
2. Windows 2000 and Windows XP: Double-click the Add or Remove
Programs icon.
Windows Vista: Double-click the Programs and Features icon.
3. From the list of programs, select One Touch 4.0. Click the
Change/Remove button.
4. Click Yes when asked to confirm that you want to remove these
software programs.
The OneTouch 4.0 software is removed from your computer.
5. Unplug the scanner USB cable.
6. Close all open windows and reboot (restart) your computer.
STEP 2: UNINSTALL THE PAPERPORT SOFTWARE
1. On the Windows taskbar, click Start, point to Settings, then click
Control Panel.
2. Windows 2000 and Windows XP: Double-click the Add or Remove
Programs icon.
Windows Vista: Double-click the Programs and Features icon.
3. Select PaperPort and click Remove.
4. A message windows opens and asks if you are sure you want to
remove PaperPort from your computer. Click Yes.
5. Close all open windows and reboot (restart) your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
150
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
HOW TO INSTALL ANOTHER DRIVER
Before you can install another driver for your scanner, you must remove
the currently installed driver first. Then the new driver can be installed.
1. Open the Windows Control Panel.
2. Windows 2000 and Windows XP: Double-click the Add or Remove
Programs icon.
Windows Vista: Double-click the Programs and Features icon.
3. Select OneTouch 4.0 then click on the Remove button.
4. A message window opens and asks if you are sure you want to
remove OneTouch 4.0 from your computer. Click Yes.
The OneTouch 4.0 software is removed from your computer.
5. Select OneTouch 4.0 ScanSoft OmniPage OCR Module then
click on the Remove button.
6. A message window opens and asks if you are sure you want to
remove OneTouch 4.0 ScanSoft OmniPage OCR Module from
your computer. Click Yes.
The OneTouch 4.0 ScanSoft OmniPage OCR Module software is
removed from your computer.
7. Select Kofax VirtualReScan 4.10 then click on the Remove
button.
8. A message window opens opens and asks if you are sure you want to
remove Kofax VirtualReScan 4.10 from your computer. Click Yes.
The Kofax VirtualReScan 4.10 software is removed from your
computer.
9. Close the Control Panel windows.
10. Unplug the scanner USB cable.
11. Reboot (restart) your computer.
12. Follow the instructions in “Step 1: Install the Software” on page 5
of this User Guide and install one of the other driver options.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO REPLACE THE PLUG ADAPTER 151
HOW TO REPLACE THE PLUG ADAPTER
The three plug adapters you received with your scanner means you can
use the power supply with electrical outlets in different countries.
To remove and replace an adapter:
1. Unplug the power supply from the wall outlet.
2. Press down on the latch that holds the adapter in place.
3. While keeping the latch pressed down, slide the adapter down and
off the power supply.
4. To place a new adapter on the power supply, use the procedure
described on page 12 of this User’s Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
152
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
HOW TO TURN AUTOLAUNCH OFF/ON
In some instances, you may not want to use the scanner’s AutoLaunch
technology. You can turn off AutoLaunch so the scanner will not
automatically scan when you insert a document. Typically, you turn off
AutoLaunch when you want to use the scanner with some other
scanning application.
You turn AutoLaunch off and on from either the OneTouch icon or
from the Windows Control Panel.
To turn AutoLaunch Off/On from the OneTouch icon:
1. Right-click on the OneTouch icon in the Windows Notification
Area (at the bottom right corner of the screen).
The OneTouch Icon.
2. Choose Show Hardware from the pop-up menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO TURN AUTOLAUNCH OFF/ON 153
The Hardware Properties window opens.
3. Click the Properties button.
The Device Configuration Properties window for the Visioneer
Strobe XP 220 opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
154
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
4. Click to uncheck the option, Enable the generation of events
when paper is inserted into the scanner. This turns off the
AutoLaunch feature.
5. Click OK, then click OK at the Hardware Properties window.
6. To turn the AutoLaunch back on later, follow the same process, but
Note: If you are working with the TWAIN interface, you can also
click the small Strobe XP 220 icon in the upper right corner of the
window to open the Visioneer Strobe XP 220 Device Configuration
Properties window. See the example on page 142.
To turn AutoLaunch Off/On from the Windows Control Panel for
Windows XP or Vista:
1. On the Windows taskbar, click Start, point to Settings, then click
Control Panel.
2. Double-click the Scanners and Cameras icon.
The Scanners and Cameras window opens.
3. In the Scanners and Cameras window, right-click the Visioneer
Strobe XP 220 icon, and select Properties from the menu.
The Visioneer Strobe XP 220 Properties window opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO TURN AUTOLAUNCH OFF/ON 155
4. Select the Device Settings tab.
The options are the same as shown on the Device Configuration
Properties above.
5. Click to uncheck the option, Enable the generation of events
when paper is inserted into the scanner, to turn off the
AutoLaunch feature.
6. Click OK, then close the Scanners and Cameras Control Panel
window.
7. To turn the AutoLaunch and Excessive Skew features back on later,
follow the same process, but click Reset Device or re-select the
options you unchecked in Step 2 above, and click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
156
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
To turn AutoLaunch Off/On for Windows 2000, you will use the
TWAIN interface:
The following steps use PaperPort to access the TWAIN interface, but
you can also use other applications which access it. If you use another
application, please see its user’s guide for the steps to access the TWAIN
interface.
1. On the Windows taskbar, click Start, point to Programs, point to
PaperPort, then click PaperPort.
The PaperPort desktop opens.
2. Click the Scan icon on the PaperPort command bar.
The PaperPort TWAIN interface opens.
If the Scan button is not active, you may have to set up your
scanner first to use PaperPort. See “Setting Up Your Scanner to
Work with PaperPort” on page 129.
5. Click the scanner icon at the top right corner of the window.
Click this icon.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO TURN AUTOLAUNCH OFF/ON 157
6. If the Hardware Properties window opens, click the Properties
button.
The Device Configuration Properties window opens.
The options are the same as shown on the Windows Device
Configuration Properties window on page 155.
7. Click to uncheck the option, Enable the generation of events
when paper is inserted into the scanner, to turn off the
AutoLaunch feature.
Download from Www.Somanuals.com. All Manuals Search And Download.
158
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
8. Click OK, then close the Scanners and Cameras Properties
window.
9. To turn the AutoLaunch and Excessive Skew features back on later,
follow the same process, but click Reset Device or re-select the
options you unchecked, and click OK.
SCAN FROM ONETOUCH WHEN AUTOLAUNCH IS OFF
If AutoLaunch is turned off, you can still scan from the OneTouch
Panel.
1. Open the OneTouch Panel.
2. Insert the document. The scanner rollers will grab the top edge of
the paper but won’t feed it through yet.
3. Click (not right-click) the PaperIn icon.
If you haven’t inserted the document yet, a message above the panel
tells you to insert the document.
4. Scanning begins and the scanner rollers feed the document through
the scanner.
The scan image will appear in the Destination Application indicated by
the icon on the OneTouch Panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
VISIONEER STROBE XP 220 SCANNER SPECIFICATIONS 159
VISIONEER STROBE XP 220 SCANNER SPECIFICATIONS
Optical resolution
Bit Depth
600 dpi
48-bit color (internal, 16-bit a/d converter
recognition, over 68 billion colors)
16-bit gray (internal, 4096 shades of gray)
24-bit color, 8-bit grayscale, 1-bit black and
white
Output Bit Depth
Scan Method
Interface
Fast Sheet fed
USB 2.0 High Speed; compatible with USB 1.1
Scanner dimensions
Height
2.0 inches (5.08 cm)
Width
2.5 inches (6.40 cm)
Length
11.0 inches (28.45 cm)
Weight
1.3 pounds (0.59 kg)
Operating temperature
Relative humidity
Power supply
50°–104° F (5°–35° C without condensation)
20%–80% (@35° C without condensation)
DC Jack, 24Vdc/0.83A (~20W), 100-240Vac,
Energy Star and RoHS compliant
≤ 5.5 Watts (during operation)
≤ 2.7 Watts (on standby)
Power consumption
Power cord
AC, US, 3P, 10A/125V, 180 cm, 3C, 18AWG,
RoHS compliant
USB cable
185 cm, 28AWG, with core, RoHS compliant
Safety and agency certifications UL, FCC Class B, VCCI Class B, CE, WEEE
Download from Www.Somanuals.com. All Manuals Search And Download.
160
VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
VISIONEER STROBE XP 220 SCANNER PARTS LIST
Please use the following part names and part numbers when ordering
replacements for your scanner. Visit our web site at www.visioneer.com
to order replacement parts.
Part
Part Name
Part Number
Calibration Page
and
05-0621-000
Cleaning Page
Photo Sleeve
USB Y-Cable
05-0559-000
35-0112-000
Power Supply
37-0081-000
Strobe XP 220 US
Clip, RPA 10, D2
70-0528-000
(Reorder includes all
three plug adapters)
Strobe XP 220 UK
Clip, 15RPK-N, A2
Strobe XP 220 Europe
Clip, JF16, A3
Download from Www.Somanuals.com. All Manuals Search And Download.
I N D E X
DeSpeckle 82
OCR 39, 58, 72
text file format 53
dictionary languages 59
Disc 1 5
Document Format 39
documentation 3
dpi 140
A
Advanced Clarity 83
Advanced Properties 139
Apply button 34
archive documents 47
aspect ratio 86
Auto Color Detect 83
AutoBrightness 82
AutoCrop 82
Autocrop to Length 125
Autocrop to Original 78, 124
AutoDeskew 82
AutoLaunch 25, 29
turn off/on 158
Edge Cleanup 82
eMail 36
eMail Properties 49
Excel Spreadsheet 55
AutoOrientation 83
file format 54
Format 40
B
Black&White 76, 123
BMP 51
Brightness 77, 124, 140
Burn to CD 48, 100
button options 35
button settings 39
HTML 105
Format tab 68
gamma 85
GrayScale 76, 123
C
Color 76, 123
color filter 80, 125
Comma Delimited 55
components 2
htm file format 55
HTML Document 55
HTML page 106
HTML Web Page 105
hue 85
Configure Before Scan 95
cancel 99
Contrast 77, 124, 140
csv file format 55
I
Image Documents Properties 45
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
162
Image Editors 36
image file 51
improvements and settings 78
installation 4
Options tab 34
Page Settings 78
page settings 78
invert image 79
J
JPG 51
icons 2, 27
JPG file size 52
options 27
PaperPort 119
Scan Pane 121
parts 1
L
Languages in Document 59
Link Properties 41
M
PDF 36, 51
Microsoft Internet Explorer 106
Microsoft Outlook 49
Microsoft Paint 45
Moire Patterns 79, 125
monitor 3
PDF file size 52
photo scan 28
photo sleeve 28
Picture type 140
plug adapter
attach 12
replace 151
N
Normal PDF 55, 71
nPDF 55, 71
recalibration 141
Recognition Quality 61
Refresh button 34
Reject Character 61
Resolution 45, 77, 124, 140
Rich Text Format 54
rtf file format 54
O
OCR 53
columns 68
optical character recognition 57
storage 109
tables 69
OCR Dictionary 60
OCR input format 68
OCR Options 58
OCR tab 59
OneTouch Panel 30, 31
Detail View 31
Hardware View 31
OneTouch Properties window 30, 32, 41
options 35, 74
saturation 85
Scan Configuration 39
scan multiple pages 98
Scan Settings 76
scan with event forwarding 103
scanner
components 2
connecting 13
Download from Www.Somanuals.com. All Manuals Search And Download.
recalibration 141
specifications 159
Text Editors 36
uninstall 149
text file format 53
Text Formats 53
TIFF 51
TWAIN 96, 104
TWAIN standard 119
scanner button 2, 30
Searchable PDF 55, 71
Select Configuration 33, 40
Select Format 34
setup 4
SharePoint 88
Show Hardware 116
Simple Text 54
size 78, 126
skewed page 78, 124
sPDF 55, 71
user dictionary
edit 65
new 62
specifications 159
spreadsheet 57, 69, 70
Sti event forwarding 36
Storage and CD-R/W 36
Storage Properties 47
Straighten Image 79, 124
system requirements 3
watermark, remove 80, 125
WIA 96, 136
Windows Image Acquisition 136
Word Document 54
X
T
xls file format 55
technical support 146
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
164
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Teac TV Receiver 7250 User Manual
TeleAdapt CD Player KD G721 User Manual
Toastmaster Oven 362B User Manual
Trane Heat Pump GETB User Manual
TRENDnet Network Card TW100 W1CA User Manual
Tricity Bendix Washer BIW 123 W User Manual
Tyco Switch F792 User Manual
Uniden Two Way Radio TR622 2 User Manual
VTech Cordless Telephone DS3211 2 User Manual
VTech Telephone Accessories I6725 User Manual