User’s Manual
TM
Tree House Hideaway Playset
© 2014 VTech
Printed in China
US
91-002932-000
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing the VTech® Go! Go! Smart Animals™ Tree
House Hideaway Playset™ learning toy!
Explore the Go! Go! Smart Animals™ Tree House Playset™ by
VTech®. Learn about animals, colors and more with the SmartPoint™
panda. Ride the elevator to the top of the tree house, then take a ride
down the slide! For added fun, you can connect this playset to other
Go! Go! Smart Animals™ and Go! Go! Smart Wheels® playsets (each
sold separately).
TREE HOUSE
SHAPE SORTER
TURNING
TELESCOPE
PLATFORM
LAUNCHR
SWING
ELEVATO
BASKET
ARTPOINTTM
LOCATIONS
PANDA
THREE SHAPE SORTER
PIECES
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INCLUDED IN THIS PACKAGE
One tree house
shape sorter
One treetop
platform
One elevator basket
bracket with hand crank
One SmartPoint™
launcher
One welcome sign
One SmartPoint™
elevator basket
One 90 - degree
track, female
One 90 - degree
track, male
One SmartPoint™
straight track
One tree base
One entrance piece
One SmartPoint™
entrance track
3
Download from Www.Somanuals.com. All Manuals Search And Download.
One shape sorter One turning SmartPoint™ One tree trunk
container
telescope platform
with track
One SmartPoint™
swing
One swing bracket
Four screws
One VTech® Go! Go!
Smart Animals™ panda
Three shape
sorter pieces
Two spiral
ramp pieces
4
Download from Www.Somanuals.com. All Manuals Search And Download.
One sheet of labels
WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child’s safety.
ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches et étiquettes.
Ils ne font pas partie du jouet.
NOTE: Please keep user’s manual as it contains important
information.
Please adhere the labels to the playset securely
as indicted below:
1
2
4
1
3
4
2
3
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
BATTERY INSTALLATION - PANDA
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the panda. Use a coin or a
screwdriver to loosen the screw.
3. Install 2 new ‘AAA’ (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
•
•
•
Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as recommended.
Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
•
•
•
•
•
•
•
•
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in fire.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging (if
removable).
•
Rechargeable batteries are only to be charged under adult
supervision.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
With the VTech® Go! Go! Smart AnimalsTM Tree House Hideaway
PlaysetTM, safety comes first. To ensure your child’s safety, adult
assembly is required.
1. Attach the tree trunk with track to the
tree base as shown. You will hear a
“click” sound to indicate the track is
secure.
2. Attach the treetop platform to the tree
trunk with track. You will hear a “click”
sound to indicate the track is secure.
3. Attach the SmartPoint™ launcher to
the treetop platform as shown. You
will hear a “click” sound to indicate
the track is secure.
4. Attach the elevator basket bracket to
the SmartPoint™ elevator. You will
hear a “click” sound to indicate the
elevator basket is secure. Once the
bracket is connected to the elevator
basket, it cannot be detached.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Place the elevator basket with hand
crank on the treetop platform as
shown, and fasten it with the four
screws provided.
6. Attach the tree house shape sorter
to the treetop platform. You will hear
a “click” sound to indicate the treetop
platform is secure. Once the tree
house shape sorter is connected
to the treetop platform, it cannot be
detached.
7. Attach the swing bracket to the
SmartPoint™ swing. You will hear a
“click” sound to indicate the track is
secure. Once the bracket is connected
to the SmartPoint™ swing, it cannot
be detached.
8. Attach the swing bracket to the tree
house shape sorter as shown. You
will hear a “click” sound to indicate the
swing is secure.
9. Attach the SmartPoint™ turning
telescope platform to the tree house
shape sorter. You will hear a “click”
sound to indicate the telescope
platform is secure.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Connect the shape sorter container
to the tree base.
11. Connect the SmartPoint™ entrance
track to the container as shown.
12. Insert the entrance piece to the
SmartPoint™ entrance track.
13. Attach the upper most spiral track
piece to the tree trunk with track and
entrance piece as shown.
14. Connect the two spiral ramp pieces
as shown.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Insert the welcome sign into the
bottom most spiral ramp piece as
shown.
16. Once you’ve completed the above
steps, you are ready to play! You
can connect these pieces to the
other included track pieces or you
can connect this playset to other Go!
Go! Smart Animals™ and Go! Go!
Smart Wheels® playsets (each sold
separately).
PRODUCT FEATURES – PANDA
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF
SWITCH to the ON ( ) position. To
turn the unit OFF ( ), slide the ON/
OFF SWITCH to the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech® Go! Go! Smart Animals™
panda will automatically power-down after approximately 60 seconds
without input. The unit only can be turned on again by pressing the
light-up button or pushing the panda quickly.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVITIES – PANDA
1. Slide the ON/OFF SWITCH to the
ON position to turn the unit on. You
will hear a panda sound, a song and
a phrase. The light will flash with the
sounds.
2. Press the LIGHT-UP BUTTON to hear
fun sounds, sing-along songs and
phrases. The light will flash with the
sounds.
3. Push the panda to hear fun sounds and
melodies. While a melody is playing,
push the panda again to add in fun
sounds on top of the melody. The light
will flash with the sounds.
4. For added fun, the panda interacts with
VTech® Go! Go! Smart Animals™
playsets (each sold separately). Simply
roll the panda over one of the playset’s
SmartPoint™ locations to see the light
flash and to hear greetings, fun sounds,
short tunes and sing-along songs. You
can also play with your animal on Go!
Go! Smart Wheels® playsets (each sold
separately).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVITES – TREE HOUSE
1. Move the panda or any SmartPoint™
animal (each sold separately) over
the tree house’s six SmartPoint™
locations to trigger fun sounds, songs,
or phrases.
2. Lift the panda to the top of the tree
on the elevator basket by turning the
elevator crank.
3. To launch the panda down the
spiral track, place the panda on the
LAUNCHER at the top of the treetop
platform. Lift up the LAUNCHER to see
the panda slide down.
4. Rotate the SmartPoint™ telescope
platform to enjoy great views.
5. Insert the shape sorter pieces into
the tree house shape sorter’s correct
locations.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call VTech® at 1-800-
521-2010 in the U.S. or 1-877-352-8697 in Canada.
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech® take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department on
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|