Product Brief: Powereta™ – Single Output High Current Double-P Quarter Brick
Powereta™ iQP Series Double-P Quarter Brick
48V Input, 5V/50A/250W DC Output
The Powereta™ iQP Series offers an industry standard
Double-P quarter brick high current power module with true
useable output power. The iQP series power modules are
ideally suited for high-density distributed power architectures
where the demands of voltage and substantial load mandate
the creation of a robust local intermediate 5V distribution bus.
Its 92% full load efficiency (93% at 70% load) and superior
thermal performance make the iQP Series of power modules
ideally suited for tight space and power-hungry applications in
demanding thermal environments. This rugged building block
is designed to serve as the core of your high reliability system.
A wide output voltage trim range, -20 to +10%, and remote
sensing are standard features enhancing versatility.
Features
TDK Innoveta Base
Product Code
iQP48050A050V
Input
Voltage
36-75V
Output
Voltage
5V
Output
Current
50A
Efficiency
70%Load
93%
Efficiency
100%Load
92%
•
•
•
•
•
•
•
Standard Double-P Quarter Brick Pinout
Size: 2.28” × 1.45” × 0.5”
Up to 50A of output current
Power density > 151W / in3
Typical Performance
Maximum efficiency – up to 94.5%
Typical full load efficiency: 92%
Output power – up to 250W in high
ambient temperature, low airflow
environments with minimal derating
Wide output voltage trim range
Industry standard output voltage trim
Basic insulation – 1500Vdc
Choice of remote on/off configuration
Remote sense
Constant switching frequency
Latched output over-voltage protection
Auto-recovery full protections:
Input Characteristics
Operating input range
Transient input voltage
Turn-on voltage
Turn-off voltage
Maximum input current
36-75V
100V
34.7V
32.3V
8A
100mS max
•
•
•
•
•
•
•
•
Input 0-75V, Io,max
Output Characteristics
Output voltage tolerance
+/- 3.3% max
Over line, load, and
temp to end of life
Io,max
Over rated input
Over rated load
On/Off to 90% Vo
%Vo,nom
20MHz bandwidth
Load step 25% of
Io,max
Efficiency
92%
3 mV
3 mV
Line regulation
Load regulation
Start-up time
Output voltage adjustment
Output ripple
Dynamic response
Transient voltage
Recovery time
40 ms
80%-110%
80 mVp-p
o Input under and over voltage
o Output over-current
o Output short circuit
o Thermal limit
80 mV
200 µS
250 kHz
slew rate =0.1A/us
Ripple frequency
Fixed
Protection
Output over-current
Short circuit
108% of Io,rated
Continuous
protection
121% of Vout,nom
126C
Auto-recovery hiccup
Auto-recovery hiccup
•
UL 60950 (US and Canada), VDE 0805,
CB scheme (IEC950) Safety markings
and CE Mark (EN60950)
Optional 0.110”, 0.145”, 0.180” pin length
Optional non-latching OVP protection
EMI: CISPR 22 A or B with external filter
Multiple patents pending
Output over-voltage
Thermal shutdown
Latching
Auto recovery with
hysteresis
•
•
•
•
•
Environmental
Operating temperature, Tc
-40C to 112C
See full datasheet
ISO9000 certified manufacturing facilities
℡ (877) 498-0099
©2005 TDK Innoveta Inc.
1/2
iQP 5V Product Brief 6/6/2005
Download from Www.Somanuals.com. All Manuals Search And Download.
|