Universal Remote Control Universal Remote RF30 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started-Overview

This is what MASTERCONTROL RF30 is all about!

The RF30 is designed to operate up to 15 different

Audio/Video Components and is pre-programmed to

operate virtually all brands of TV, VCR, DVD and CD

Players, Cable Set Top Boxes, Satellite Receivers, TiVo

and other DVRs, Audio Components, Tape Decks,

Multimedia PCs, XM Radio, Ipod, X-Box, Lighting Controls

and other custom installation products. It also offers an

impressive lineup of special features designed to provide

you with many time-saving conveniences and enhance

your overall entertainment experience. However, we

strongly recommend that you fully complete all of the

Basic Setup steps before proceeding to customize your

RF30 with any of the special advanced features.

LIGHT

BUTTON

PAGE

BUTTONS

changes the page of

buttons displayed

PAGE

NUMBERS

SCREEN

BUTTONS

MAIN

BUTTON

takes you to the main menu

FUNCTION

BUTTONS

Battery Installation

The very first step is to

tell by the + (positive) and –

(negative) symbols. Once

the batteries are correctly

installed, replace the cover.

Now you’re ready to start!

insert the four AAA batter-

ies that are included in the

package into the battery

compartment located in the

back of the remote. Just

press the tab and lift off the

cover. Please be sure to

insert the batteries correctly

as you see in the diagram.

Remember, there is a

Touch the

Screen to use

the Screen

Buttons

positive and negative end

to each battery and you can

Download from Www.Somanuals.com. All Manuals Search And Download.

Activating Component Commands –

Simple, Easy, Intuitive

Light Button

The fully backlit keypad makes the RF30 easy to use in the

dark or dim lighting conditions. Simply press the LIGHT

button to backlight all the keypad buttons and LCD touch

screen. To turn off the backlight, press the LIGHT button

again, or just wait ten seconds (the backlight automatically

shuts itself off). Lights out!

Once you’ve programmed

RF30 for your Components,

all you have to do to oper-

ate a specific Component is

first, press the MAIN button.

This will display Page 1 of

the MAIN menu on the LCD

touch screen. Page 1 of the

MAIN menu displays seven

Components, plus FAV

and select the next

Component you want to

operate.

If you don’t see the

Component you want to

control on Page 1 of the

MAIN menu, just use the

PAGE ( ) ( ) display buttons

at the bottom of the screen

to bring up Page 2 of the

MAIN menu which displays

an additional eight

Try it out!

(Favorite Channel). Then,

simply select the

Component you want to

operate by pressing the

desired Component display

button on the LCD Touch

Screen. As an example, if

you press the TV display

button, the display label at

the top of the screen will

change from MAIN to TV,

and all the buttons on RF30

Components.

Each Component is provided

with four pages of pre-

labeled command display

buttons (or space for addi-

tional command display but-

tons). Once again, simply

use the PAGE ( ) ( ) display

will work your TV. To oper-ate buttons to take you to the

another Component,

next command page, or

return you to the previous

command page.

simply press the MAIN

button again to return to

Page 1 of the MAIN menu

LIGHT

BUTTON

TV DISPLAY

BUTTON

FAV

BUTTON

PAGE

BUTTONS

MAIN

BUTTON

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Setup - Overview

There are two ways to program the RF30:

• The Pre-Programmed Code Method

• The Learning Method

The Pre-Programmed Code Method allows you to set up

all the buttons at once, so it’s the fastest and easiest of

the two methods. The Learning Method allows you to

transfer functions from other remotes (old or new), one

button at a time.

Pre-Programmed Code Method

STEP 1:

STEP 2:

STEP 3:

The pre-programmed 3-digit

codes are found in the back of

this Manual on page 44. The

codes are listed by Component

category (i.e., TV, VCR, DVD,

etc.), then by brand name. For

instance, if you want to locate

a code for a Sony TV, first

locate the TV category, and

then look for the Sony brand.

Now, turn on the Component

you want to program... let’s say

your TV to start. Look up your

TV’s manufacturer setup code

from your reference list.

Press and hold the MAIN and ENT

(Enter) buttons at the same time

for approximately 3 seconds, until

the word “SETUP” is displayed at

the top of the LCD touch screen.

This signals that you are now in

setup mode.

IMPORTANT:

You now have 30 seconds to perform

the next step while you are in SETUP

mode. If you don’t press a button

within 30 seconds, SETUP will disap-

pear from the screen, signaling that

you have exited setup mode and you

will need to start over.

Once you have located the

3-digit code (or in some cases,

several code numbers) for the

Component that you want to

operate with your RF30, write

them ALL down on a piece of

note paper. It’s important that

you write down all the codes

because only one code is going

to work for you.

MAIN

BUTTON

ENTER

BUTTON

Download from Www.Somanuals.com. All Manuals Search And Download.

The screen will then display the

seven Components (and FAV) on

Page 1 of the MAIN menu.

STEP 4:

Press the P-PRO button to select

the Pre-Programmed Method.

STEP 5:

STEP 6:

Press the Component button

you want to program. For

example: If you want to setup

the TV Component button,

press the TV Component but-

ton. The display at the bottom

of the LCD screen will flash

“FROM - TABLE”.

In this step you verify the type

of component you plan to

operate with this component

button. For example: If you plan

to operate the TV component

with the TV button, simply press

the TV button once again.

However, if for example you are

setting up AUX to operate a

second DVD Player, you would

first need to press AUX in Step

5, and then DVD in Step 6.

To display Page 2 of the MAIN

menu that lists an additional

eight Components, simply press

the ( or ) Page buttons at the

bottom of the screen.

DEVICES

P-PRO

BUTTON

FAV

BUTTON

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTE:

If the Component fails to turn off after you have entered

all the code numbers listed for your brand, you can scan

through all the other code numbers that are pre-loaded

into the RF30 for that Component (in this case TV) by

using the UP or DOWN buttons on the screen. (There is

a chance that your Component was actually manufactured

by another brand.) However, most of the code tables are

so large that it is usually faster to use the Learning Method

on Page 15.

find a new correct code. For

example, maybe your Sony TV

turned off with code number 147,

but the volume controls did not

work properly. If this is the case,

try the next code number listed

for that Component until you find

a perfect match.

STEP 7:

STEP 8:

Point the RF30 toward the

Component you want to

When the Component turns off,

press the ON button to turn the

Component back on. Now you

can test the Volume and

program, (in this example, TV),

and punch in the 3-digit code

that you wrote down for that

specific Component. Use the

Number buttons 0-9 on the

remote to punch in the code.

If the 3-digit code number that

you just punched in is correct,

the Component will turn off. If

the Component does not turn

off, continue entering code

numbers from your list until the

Component turns off. Some

brands have several possible

code numbers.

Channel buttons (for TV), or

PLAY and STOP (for VCR and

DVD) to make sure they all

work. If any of the buttons do

not work properly, you need to

UP & DOWN

BUTTONS

BUTTON

VOLUME

BUTTONS

CHANNEL

BUTTONS

PLAY

BUTTON

NUMBER

STOP

BUTTONS

BUTTON

Download from Www.Somanuals.com. All Manuals Search And Download.

NOW, PROGRAM THE REST OF YOUR

COMPONENTS BY REPEATING STEPS

1 THROUGH 9. IN MOST SYSTEMS,

YOU CAN FINISH BASIC SETUP IN

JUST A FEW MINUTES AND PUT ALL

YOUR OLD REMOTES AWAY.

STEP 9:

STEP 10:

Once you have found the right

code, save the code number by

pressing the SAVE button that

appears on the LCD screen.

The LCD screen will blink

“SAVED” two times, signaling

that the code number has been

successfully saved.

Exit SETUP mode by pressing

the MAIN button two times.

When the LCD screen displays

MAIN, you are back in normal

operating mode.

IF YOU ARE STILL MISSING COM-

MANDS TO CONTROL ANY OF YOUR

COMPONENTS, USE THE LEARNING

METHOD ON PAGE 15.

SAVE

MAIN

BUTTON

Download from Www.Somanuals.com. All Manuals Search And Download.

Learning Method

The RF30 can actually ‘learn’ commands from other remote

controls (old or new), one-button-at-a-time, so it will never

become obsolete. RF30 is the last remote you’ll ever need!

Just follow these simple steps:

STEP 1:

STEP 3:

STEP 4:

Line-up the RF30 with the other

remote control, head-to-head,

one or two inches apart.

Press the LEARN button on the

LCD screen. The top of the

screen will change to “LEARN”

and display the seven

Select the Component you want

to teach commands to by

pressing that Component button

on the LCD screen (in this

example, TV). The top of the

screen will change to “TV”.

STEP 2:

Components (and FAV) from

Page 1 of the MAIN menu.

On the RF30, press and hold the

MAIN and ENT (Enter) buttons

at the same time for approxi-

mately three seconds, until the

word “SETUP” is displayed at

the top of the LCD touch screen.

This signals you are now in

SETUP mode.

To display Page 2 of the MAIN

menu that lists an additional

eight Components, simply press

the ( or ) Page buttons at the

bottom of the screen.

NOTE: If you want to teach any com-

mand to a Component button, press the

Component button once the top of the

screen displays “MAIN”, by pressing the

PAGE button. The top of the screen will

change to "READY". Then go to STEP 6.

IMPORTANT:

You now have 30 seconds to perform

the next step while you are in SETUP

mode. If you don’t press a button

within 30 seconds, SETUP will disap-

pear from the screen, signaling that

you have exited setup mode and you

will need to start over.

LEARN

BUTTON

MAIN

BUTTON

ENTER

BUTTON

Download from Www.Somanuals.com. All Manuals Search And Download.

Try 1”, 2” and so on, up to

4 feet.

• Try tapping the button on your

old remote instead of pressing

and holding it during the

learning process.

STEP 5:

STEP 6:

STEP 7:

Press any button on the RF30

that you want to teach a

command to. The top of the

screen will change to "READY"

and the bottom of the screen will

display the button you pressed.

Press and hold the button on the

other remote control that you

want to ‘teach’ to the RF30 until

the LCD display on the RF30

changes to either “GOOD” or

“FAILD”. If the “GOOD” label

appears on top of the display

and “SAVED” flashes on the bot-

tom, you were successful. If

the “FAILD” label appears on

top of the display, try ‘teaching’

the same button to the RF30

once again by repeating STEPS

5 and 6.

Now, continue to teach the RF30

any other commands from your

old remotes by repeating STEPS

4 through 6 (to go back to STEP

4, simply press MAIN once).

Some additional Information

regarding the Learning Process:

STEP 8:

Once you have completed

teaching all the button

commands to the RF30, return to

normal operation by pressing the

MAIN button twice.

• Learned functions override any

existing pre-programmed

functions on the remote control.

• All buttons can be learned

except for the PAGE, MAIN and

LIGHT buttons.

NOTE: If you don’t see the display button

you would like to teach on the LCD

screen, use the ( or ) PAGE buttons at

the bottom of the screen.The only

buttons you can’t teach are the PAGE and

MAIN buttons.

Test all your new commands. If

any of them don’t work, try the

Learning Method again, follow-

ing these suggestions:

• Learned functions are

automatically erased when a

new function is learned on the

same button.

• Learned functions are retained

even after a different Setup

Code Number is programmed

into the remote.

• To return to an original pre-

programmed function, a learned

function must be erased.

• Move to another room. Plasma

TVs, sunlight, halogen or quartz

lighting can interfere with the

learning process.

• Even though the old remote

seems to be working fine, put in

fresh alkaline batteries.

• Gradually vary the distance

between the remote controls.

Download from Www.Somanuals.com. All Manuals Search And Download.

Transmitting (Busy Signal) Icon

Customizing Your RF30 with Special

Advanced Features

When a command is being transmitted, an icon will appear

in the upper right corner of the LCD screen. This indicates

that a signal is being sent. This is particularly useful when

setting up Macros and FAVs, since it flashes with every step

of a sequence of commands.

After you’ve finished all your basic setup, you can choose

to make operation easier by customizing the RF30 just the

way you want, using the Special Advanced Setup Features

described in this section.

Customizing the LCD Touch Screen

You can easily edit or change the name of any of the

display buttons (including Favorite Channels) on the LCD

screen by following these steps:

STEP 1:

STEP 3:

CHILD LOCK FEATURE

Press and hold the MAIN and

ENT (Enter) buttons at the same

time for approximately 3 seconds,

until the word “SETUP” is

displayed at the top of the LCD

touch screen. This signals that

you are now in setup mode.

Press the TEXT button. The

screen will display the list of

Components and “EDIT” will

appear at the top of the screen.

This ‘child-lock’ feature prevents the unauthorized use of

the remote control by children. It blocks all operations of

the remote control.

STEP 4:

Navigate to the Component and

page where there is a button

label you want to EDIT, selecting

between the FAV, MAIN,

COMPONENT; then using the

PAGE button.

To Activate:

IMPORTANT:You now have 30 seconds to

perform the next step while you are in

SETUP mode. If you don’t press a button

within 30 seconds, SETUP will disappear

from the screen, signaling that you have

exited setup mode and you will need to

start over.

Press the +10 and ENT (Enter) buttons simultaneously for

3 seconds. The bottom of the LCD will blink “LOCKED” three

times and then display “LOCKED”.

NOTE: If you wish to change the name of

a Component button, press the Page (

button twice.The top of the display will

change to MAIN, and you can navigate to

MAIN page 1 or page 2 before going on

to Step 5.

To Return to Normal Operation:

Press the +10 and ENT (Enter) buttons simultaneously again

for 3 seconds. The LCD will display the last use mode.

)

STEP 2:

Press the EDIT button. The LCD

display will change to the EDIT

menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

STEP 5:

STEP 6:

STEP 7:

Press the button you wish to

edit. The first character space

of your button label will start to

blink.

Change the character by using

any of the number keys. Each

press of the same number but-

ton selects the next character of

that number’s group, as shown

in the diagram below.

Once the character you want

appears, move to the next space

by pressing the Right cursor but-

ton.

STEP 8:

When you are finished editing

the button, press the button you

edited and “SAVED” will flash at

the bottom of the display.

UP CURSOR

Button deletes all text

LEFT CURSOR

Moves blinking

character left

DOWN CURSOR

deletes the currently

blinking character

To change any other button

labels on the same Component,

press the next button, then

repeat steps 6-8. If you wish to

edit a button on another

RIGHT CURSOR

Moves blinking

character right

Component, press the MAIN but-

ton once, then repeat Steps 4-8.

BLINKING

CHARACTER

STEP 9:

Once you’ve finished editing but-

tons, press the MAIN button four

times to return to normal opera-

tion.

Download from Www.Somanuals.com. All Manuals Search And Download.

Favorite Channel Setup

This is one of RF30’s most desirable features. Once it’s set up,

you can select up to 40 favorite channels with the press of a

button - without the need to remember or type in a channel

number. Let the channel surfing begin!

To access Favorite Channel listings, press the MAIN button

to bring up Page 1 of the MAIN menu. Then press the FAV

(Favorite Channel) button on the LCD touch screen. The

screen changes to a list of favorite TV channels. Each button

can be set to instantly select the channel on your TV. There

are five pages of eight favorite channel buttons for a total of

40. Simply touch the PAGE buttons to display the other pages

of favorite channels.

To setup a Favorite Channel button, follow these steps:

STEP 3:

STEP 5:

Use the Page buttons until you

locate the name (i.e., ABC, CBS,

NBC) of the favorite channel you

want to setup.

Press either the TV, SAT or

CABLE Component button (select

the Component you use to enter

channel numbers).

STEP 1:

STEP 2:

Press and hold the MAIN and

ENT (Enter) buttons at the same

time for approximately 3

Press the FAV display button.

The top of the display will show

“FAV”. The bottom of the display

will flash “SELECT”

seconds, until the word “SETUP”

is displayed at the top of the LCD

touch screen. This signals that

you are now in setup mode.

STEP 4:

STEP 6:

Press each of the number

buttons for the channel.

Press the favorite channel

button you want to setup. The

top of the screen will change to

show the channel name. The

bottom of the screen displays

“STEP0”, indicating that you

have not entered the channel

number yet.

Note: If a number is repeated when set-

ting the channel (for example, channel

“33” or “522’), it is usually best to set a

half second delay in between the identi-

cal numbers by pressing the (II) PAUSE

button. Each press of the PAUSE button

increases the delay by a half second.

IMPORTANT:You now have 30 seconds to

perform the next step while you are in

SETUP mode. If you don’t press a button

within 30 seconds, SETUP will disappear

from the screen, signaling that you have

exited setup mode and you will need to

start over.

FAV

BUTTON

PAUSE

BUTTON

DEVICE

BUTTONS

NOTE: Some brands of television require

an ENT (Enter) command after the chan-

nel numbers.

Download from Www.Somanuals.com. All Manuals Search And Download.

MacroPower Setup

MacroPower is a unique feature that enables you to turn

all of your Components ON or OFF, at the same time, simply

with the press of one button. We call that a “Macro”.

What would normally take multiple remotes and button

pushes, the RF30 can accomplish with the press of one

button. In addition to the Power ON or OFF buttons, any of

the Display buttons (on any Component or Page) can be set

to be Macro buttons as well. Feel the power!

To setup a Power ON macro button that will turn ON several

components at the same time (for example, TV, VCR and

CABLE), follow these easy steps:

STEP 7:

STEP 8:

STEP 1:

STEP 4:

Press the LIGHT button after you

enter the channel number. A

new screen appears displaying

SAVE, UNDO or EXIT.

To save the channel you

entered, press the SAVE button.

The UNDO button lets you erase

the last entry. The EXIT button

erases all entries for this button.

Press and hold the MAIN and

ENT (Enter) buttons at the same

time for approximately 3

Press the first component

button you want the Macro to

turn on (in this example, TV)

and “TV” will display at the top

of the screen and “STEP 1” at

the bottom.

seconds, until the word “SETUP”

is displayed at the top of the LCD

touch screen. This signals that

you are now in setup mode.

STEP 9:

STEP 5:

When you are finished setting

up Favorite Channel buttons,

press the MAIN button twice to

return to normal operation.

IMPORTANT:You now have 30 seconds to

perform the next step while you are in

SETUP mode. If you don’t press a button

within 30 seconds, SETUP will disappear

from the screen, signaling that you have

exited setup mode and you will need to

start over.

Then, press the ON button to

confirm the command and

“STEP 2” will display at the

bottom of the screen. (NOTE:

Whenever a button is pressed,

another Macro step is counted

and displayed at the bottom of

the screen.)

STEP 2:

Press the MACRO button on the

LCD screen. The top of the

screen will display “MACRO”.

The bottom of the display will

flash “SELECT”.

STEP 6:

SAVE

Now, press the MAIN button to

return to the Main Component

listing. (“STEP 3” will display at

the bottom of the screen.)

BUTTON

STEP 3:

Press the ON button. “ON” will

display at the top of the LCD

screen. “STEP0” will display at

the bottom of the screen

indicating that no macro steps

have been entered yet.

Download from Www.Somanuals.com. All Manuals Search And Download.

STEP 7:

STEP 11:

STEP 12:

STEP 14:

Press the MAIN button twice to

return to normal operation.

Press the second component

that you want the Macro to turn

on (in this example, VCR) and

“VCR” will display at the top of

the screen. (“STEP 4” will

display at the bottom of the

screen.)

Then, press the ON button to

confirm the command. (“STEP

8” will display at the bottom of

the screen.)

Press the LIGHT button to end

your macro. A new screen will

appear:

STEP 13:

NOTE: Don’t worry about the number of

steps. Each macro button can store up to

190 steps, so you are not likely to run out

of steps!

If you are satisfied with your

macro, press SAVE. The UNDO

button lets you erase the last

step. The EXIT button erases all

the macro steps.

STEP 8:

Then, press the ON button to

confirm the command. (“STEP

5” will display at the bottom of

the screen.)

You can also program delays in

between commands by pressing

the (II) PAUSE button. Each

press adds half a second to the

delay.

STEP 9:

Now, press the MAIN button to

return to the Main Component

listing. (“STEP 6” will display at

the bottom of the screen.)

SAVE

BUTTON

UNDO

BUTTON

STEP 10:

EXIT

BUTTON

Press the third component that

you want the Macro to turn on

(in this example, CABLE) and

“CABLE” will display at the top

of the screen. (“STEP 7” will

display at the bottom of the

screen.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Macro Options:

SimpleSound Setup & Other ‘Punch Throughs’

SimpleSound is a dynamic feature that gives you total

SETTING UP A POWER OFF MACRO:

Simply follow the same steps as outlined above, except

press the OFF button in place of the ON button.

volume control over all the Components in your system,

even those without their own built-in volume control, such

as TiVo, DVD and VCR... saving you the hassle and

inconvenience of constantly needing to switch between

SETTING A COMPONENT BUTTON AS MACRO:

Component modes on the remote. With SimpleSound ,

If you wish to set one of the Component buttons as a

you can set the RF30’s volume control buttons to always

control the sound in your system, even when you’re in

VCR or DVD mode, without switching back to AUDIO or TV.

macro, in STEP 3, press the Page (

button twice. The top

of the display will change to MAIN, and you can navigate

to MAIN page 1 or page 2. Press the Component button

you want to set as a Macro button. The top of the screen

will display the button label you selected. Select the

Component and Page that has a button you want in your

Macro using the MAIN, Component and Page buttons.

Simply press the button(s) with the command(s) you want

in your Macro. Then complete and save the Macro by

following STEPs 12 and 13 as outlined above.

Even more exciting, SimpleSound is what is called a

‘Punch Through’ feature and is not limited strictly to volume

control. Click and enjoy!

time for approximately 3 seconds,

until the word “SETUP” is

STEP 1:

In a basic home entertainment

system, the sound may come

from your TV. In a more

advanced system, the sound

may come from your audio

Component such as a Surround

Sound Receiver or Home

Theatre system. So, first, you

need to identify which

displayed at the top of the LCD

touch screen. This signals that

you are now in setup mode.

PROGRAMMING A “RESS & HOLD” MACRO:

IMPORTANT: You now have 30

seconds to perform the next step

while you are in SETUP mode.

If you don’s press a button within

30 seconds, SETUP will disap-

pear from the screen, signaling

that you have exited setup mode

and you will need to start over.

Another option for Component button macros is to only

send the macro if the button is pressed and held. This is

setup by entering a delay as the first step of the macro.

The amount of delay determines how long the user must

press the button before the macro is sent. The advantage

of this option is that a normal press of the COMPONENT

button will simply switch Components without sending

the macro command.

Component you want to use in

your system for sound.

STEP 2:

STEP 3:

Press and hold the MAIN and

ENT (Enter) buttons at the same

From the LCD screen Setup

menu, press the PUNCH button.

STEP 4:

Then press the VOL (Volume)

button. The screen will display

“VOL” at the top. This sets up

the group of three buttons

(Volume Up, Volume Down and

Mute) in one action!

PUNCH

VOLUME

BUTTON

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Backlight Options

You can customize the backlighting feature to suit your

specific preferences by following these simple steps:

Adjusting Length of Backlight Time

You can adjust the amount of time that the RF30 backlight

stays on by entering the SETUP mode and proceeding to

page two (using the PAGE ( button), then pressing the

LIGHT button on the display (not the Backlight button).

Then enter the amount of time you would like the light to

stay on using the number pad (0-99 seconds). After making

your selection, press the SAVE button.

Adjusting Contrast

The bottom of the display flashes

“PUNCH TO”. Press the button

for the Component that doesn’t

have volume control commands

yet (i.e.,DVD). This is the

Component you are going to

PUNCH TO for the volume and

mute commands.

STEP 7:

You can make the text darker by pressing both the MAIN

and cursor UP buttons at the same time. To make the text

appear lighter, press both the MAIN and cursor DOWN

buttons at the same time.

Press the MAIN button twice to

return to normal operating mode

and test your SimpleSound

settings.

NOTE:The Punch Through feature is not

limited to volume and can also be applied

to channel selection or other functions. If

you find yourself switching to a particular

Component frequently to use a group of

controls, consider using Punch Through for

another group, as listed here:

VOL - Volume Up,Volume Down and

Mute

Turning OFF Backlighting

If you don’t want backlighting at all (this extends battery

life), press the ON button that appears on the screen. The

ON will change to OFF. Press the SAVE button. Exit the

setup mode by pressing the MAIN button.

NOTE: If you want to PUNCH TO the MAIN

Component, press the POWER OFF button

at this time.

STEP 5:

CH - Channel Up, Channel Down,

Previous Ch and Channel (0-9)

buttons.

PLAY - Play, Stop, Pause, Rewind and

Fast Forward

VOD - Guide, Menu, Info, Exit, Up,

Down, Left, Right, Select

The bottom of the display will

then flash “PUNCH FROM”. Now

select the Component that has

the volume commands you want

to use (i.e.,TV for systems using

the TV speakers, AUDIO for

systems with surround sound

receivers). The bottom of the

display will flash “SAVED”.

MAIN

BUTTON

UP & DOWN

CURSOR

Simply perform the steps outlined

above, but in STEP 4, press one

of the control options (CH, PLAY or

VOD).

HIGH

CONTRAST

LOW

CONTRAST

STEP 6:

Repeat STEPS 4-5 until all your

Components operate the volume

perfectly.

Download from Www.Somanuals.com. All Manuals Search And Download.

STEP 4:

STEP 6:

Hiding and Adding Pages

“PAGE” appears at the top of the

screen. Now, you can navigate to

any page, using the MAIN,

COMPONENT, FAV, and PAGE

buttons.

You can continue to ADD or

HIDE pages on other devices

by repeating Steps 4 and 5.

Each of your RF30 Components actually contains five

pages. However, only four pages are visible in the factory

default setting. One page is hidden in each Component.

If you wish to use the hidden page, you can ADD it. If you

don’t want to use some of the existing pages, you can HIDE

them. You can add or hide pages on Components OR on

your favorite channel pages using this simple process:

STEP 7:

When you are finished adding

and hiding pages, press the

MAIN button four times to return

to normal operation.

STEP 5:

When you select a page, the top

of the screen indicates whether

you want to “ADD?” or “HIDE”

the page displayed. When you

want to change a page’s visibility

(i.e., either ADD or HIDE),

NOTE: Be sure to program your Macros before you hide pages with

potential macros in them. You can’t access hidden pages during

macro setup. However, after you finish Macro setup, you can hide

pages without affecting operation of your macros.

simply press the LIGHT button.

STEP 1:

STEP 2:

Press and hold the MAIN and

ENT (Enter) buttons at the same

time for approximately 3 sec-

onds, until the word ”SETUP” is

displayed at the top of the LCD

touch screen. This signals that

you are now in setup mode.

Press the EDIT button on the

LCD screen.

STEP 3:

Press the PAGE button once the

screen changes to EDIT mode.

PAGE

BUTTONS

IMPORTANT:You now have 30 seconds

to perform the next step while you are

in SETUP mode. If you don’t press a

button within 30 seconds, SETUP will

disappear from the screen, signaling

that you have exited setup mode and

you will need to start over.

COMPONENT

BUTTON

FAV

BUTTON

EDIT

PAGE

MAIN

BUTTON

This page is hidden.To ADD

it, press the LIGHT button

This page is visible.To HIDE

it, press the LIGHT button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recalling Pre-Programmed Setup Code

Numbers

In case you didn’t write down the Pre-Programmed Code

Numbers that you used to set up your RF30, you can easily

recall them using this simple process:.

Cloning Other RF30s

If you are fortunate enough to own more than one RF30,

you’ll be happy to know that you can easily copy and

transfer all the setup from one RF30 to another. Just follow

these easy steps:

STEP 1:

STEP 3:

STEP 1:

STEP 3:

Press the CLONE button on each

remote.

Press and hold the MAIN and

ENT (Enter) buttons at the same

time for approximately 3 seconds,

until the word “SETUP” is

displayed at the top of the LCD

touch screen. This signals that

you are now in setup mode.

Write down the code numbers

as they appear for future

reference. Page 43 of this

manual provides a convenient

space for you to record your

code numbers.

For both the programmed RF30

that you want to clone, and

unprogrammed RF30, press and

hold the MAIN and ENT (Enter)

buttons at the same time for

approximately 3 seconds, until

the word “SETUP” is displayed

at the top of their respective LCD

touch screens. This signals that

both remotes are now in setup

mode.

STEP 4:

Return to normal operation by

pressing the MAIN button twice.

IMPORTANT:You now have 30 seconds to

perform the next step while you are in

SETUP mode. If you don’t press a button

within 30 seconds, SETUP will disappear

from the screen, signaling that you have

exited setup mode and you will need to

start over.

IMPORTANT:You now have 30 seconds to

perform the next step while you are in

SETUP mode. If you don’t press a button

within 30 seconds, SETUP will disappear

from the screen, signaling that you have

exited setup mode and you will need to

start over.

STEP 2:

Press the RECAL button on the

LCD screen. Each of the four

screen pages will display the

Component name and its

corresponding code number.

STEP 2:

Press a PAGE button on each

remote to bring up Page 2 of

Setup and display the CLONE

button.

NOTE: Use the ( or ) page buttons to

display any of the four pages of

Components and their code numbers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Erasing Commands - Overview

You can erase an individual button with a learned

command, a macro or a favorite channel. You can erase an

ENTIRE Component’s learned command or macro buttons.

You can also erase ALL your learned commands on all

Components or all your macros or favorite channels

everywhere.

If you really want a fresh start, it is possible to reset

everything to the factory default settings.

Erasing Learned Buttons, Macros or Favorite Channels

STEP 4:

STEP 7:

STEP 1:

STEP 2:

Align the two RF30s head-tohead,

about an inch apart.

Press the START button on the

unprogrammed RF30, and then

press the START button on the

programmed RF30 that you want

to clone.

Press and hold the MAIN and

ENT (Enter) buttons at the same

time for approximately 3 seconds,

until the word “SETUP” is

displayed at the top of the LCD

touch screen. This signals that

you are now in setup mode.

Press the ERASE button on the

LCD screen.

STEP 5:

Press the RECV display button

on the unprogrammed RF30 that

you want to setup by cloning.

STEP 3:

Press either the LEARN, MACRO

or FAV button. The following

screen appears:

NOTE: Cloning typically takes about 40

seconds. After successful cloning is com-

pleted, the newly cloned RF30 will flash

“GOOD”.

STEP 6:

Press the SEND display button

on the programmed RF30 that

you want to clone.

ALL - Erases ALL of the specified

(Learned, Macro or FAV buttons

everywhere in the RF30)

IMPORTANT:You now have 30 seconds to

perform the next step while you are in

SETUP mode. If you don’t press a button

within 30 seconds, SETUP will disappear

from the screen, signaling that you have

exited setup mode and you will need to

start over.

STEP 8:

Return to normal operation by

pressing the MAIN button twice.

DEVICE - Erases all learned or

Macro buttons in a single

Component (NOTE: This option

is not available for FAVs.)

KEY - Erases one button only.

Download from Www.Somanuals.com. All Manuals Search And Download.

Re-setting RF30 to Original

Factory Default Settings

If you want to start with a clean slate, you can re-set the

RF30 its original factory default settings by performing the

following steps.

NOTE: This process will essentially erase EVERYTHING you

have programmed into the RF30.

STEP 4:

STEP 5:

To return to normal operating

mode, press the MAIN button

four times

STEP 1:

STEP 2:

If you press ALL, the RF30

displays a “SURE?” button.

After the SURE button is pressed,

all the buttons will be erased.

press and hold both the MAIN

and the STOP buttons for 10

seconds.

After 10 seconds, the RESET

screen appears. Press the ALL

button. The RF30 will display a

“SURE?” button. Press the

SURE button to erase all of your

settings and return to the factory

default setup.

If you press DEVICE, a list of

Components will appear. Press

the Component button that you

wish to erase. The bottom of the

screen will flash ERASE twice,

then ERASED.

MAIN

BUTTON

SURE

STOP

BUTTON

If you press KEY, you’ll have to

navigate to the Component and

Page you want using the MAIN,

COMPONENT and PAGE buttons.

Press a button to erase it. The

bottom of the display will flash

ERASE twice, then ERASED.

SURE

BUTTON

Download from Www.Somanuals.com. All Manuals Search And Download.

The RF30 sends radio signal to the PowerBlaster , which

The Optional PowerBlaster

is a radio receiver.

(for ‘barrier-free’ RF control)

[Sold separately]

Of all the fabulous RF30 features, this is probably the most

exciting. When used in combination with the optional

PowerBlaster , the RF30 becomes an amazing remote

control powerhouse that sends multi-directional RF (Radio

Frequency) signals that pass through walls, doors and

floors - both indoors and outdoors.

This changes everything! It enables you to control

Components that are completely out-of-sight, up to 100’

The PowerBlaster converts radio signals to standard

away. The PowerBlaster picks up RF30’s radio frequency

infrared commands and sends them out via a built-in front

blaster to Components in the same cabinet space.

signals from any direction, regardless of distance, so RF30

doesn’t need to be pointed directly at any Component.

Just imagine - no more pointing! Now you can close your

entertainment center doors, hide your Components, and

still control them with ease. Control outdoor speakers on

your patio. Control your Components anywhere!

One of the best things about this is - nothing has to be

done to the RF30 for this feature to work. Every time you

press a button on the RF30, it sends both a standard IR

(Infrared Command) AND an RF (Radio Frequency) signal.

If you install the PowerBlaster kit, it will automatically

receive RF30’s radio signals and translate them into the

infrared commands that control your Components.

NOTE: The RF30's radio signals will not control Components

directly. You must have a PowerBlaster to receive the

RF30's radio signals. Components that came with “no

pointing” radio remote controls cannot be operated by the

RF30 unless the Component can be switched to standard IR

(Infrared Control) via its internal menus. Some remote

control ceiling fans are radio only and cannot be operated

by the RF30.

Self-adhesive “flashers” (included in the PowerBlaster kit)

affix to the front panels of your Components. The flashers

relay infrared commands to Components out-of-sight of the

PowerBlaster’s front blaster. The flashers plug into

PowerBlaster’s rear flasher line output jacks. Each flasher

has a 10’ cable to easily reach Components on nearby

shelves.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pre-Programmed Code Notes

Pre-Programmed Code Tables

Record the three digit codes for your system here:

The RF30’s Pre-Programmed code library is divided into

categories (TV, VCR, AUX, etc.). Each category actually

includes many types of Components. For example, the VCR

category includes TV/VCR combo units.

AUDIO

DVD

Within each category, the code numbers are listed in rows by

brand (Sony, Panasonic, B & K, etc.). Some brands have more

than one three digit code for you to try. Just circle the correct

row and refer to it while you setup (step by step instructions

for using Pre-Programmed codes are found on page 7).

SAT

VCR

CABLE

AUX

TVs, Plasmas, Projectors and Monitors

Cable TVs and Web TVs

LIGHT

TAPE

PHONO

TV2

CABLE

DVD

VCR

DVD Players and TV/DVD Combos

VCRs and TV/VCR Combos

Amps, Preamps, A/V Receivers and XM Radios

Satellite Receivers

AUDIO

SAT

VCR2

DVR

CD Players and CD Changers

TiVo, Replay and other DVR’s

Laser Disc Players

LDP

DVR

LDP

XM RADIO

IPOD

X-BOX

LIGHT

TAPE

AUX

Lighting System and Dimmers

Tape Decks

Multimedia PCs, Xbox, iPod Controls

and Custom Installation Products

PHONO Phonographs

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

ADMIRAL

ADVENT

AKAI

A MARK

CODE NUMBERS

BRAND

KENWOOD

CODE NUMBERS

072 081 161 160

247

197 146 248

112 143

197 070

002 059

143

KLOSS

KMC

KTV

043 197 143 154

AMPRO

AMSTRAD

ANAM

167 073 157 183

052

043 054 056 080 112 131

197 004 112 058

006 310

113 116 102 004 106 112 119 127 143 243 284 363 365

072

164

072

LODGENET

LOEWE

LOGIK

LUXMAN

LXI

AOC

APEX DIGITAL

AUDIOVOX

BARCO

004

076 273

233

166 007 015 052 081 160 164

164 059 197 003 060 061 004 063 064 127 022 160 094 239

MAGNAVOX

BLAUPUNKT

BROKSONIC

CAIRN

088

238

201

226 273

197 164 184

164

242

007 072 004

088

197 004 024 028 042

MARANTZ

MATSUI

MAXENT

MEMOREX

METZ

CANDLE

197 002 003 004

058

043

CAPEHART

CETRONIC

CITIZEN

197 002 003 004 043 101 103 143

MGA

CLASSIC

CONCERTO

CONTEC

CORONADO

CRAIG

043

004

043 050 051

143

MINERVA

MITSUBISHI

MTC

NAD

NEC

088

109 124 024 004 028 040 042 146 191

197 004 062 101

015 025

043 054

132 130 134 197 040 016 024 056 019 236 237 262 272

CROWN

043 143

NIKEI

043

CURTIS MATHES

CXC

DAEWOO

DAYTRON

DELL

DREAMVISION

DWIN

DYNASTY

DYNATECH

EIKI

197 101 004 143

043

004 016 043 044 076 103 114 125 127 143

004 143

319 320 321

235 345

177 257

043

NUVISION

ONKING

ONWA

OPTONICA

OPTOMA

ORION

PANASONIC

PHILCO

PHILIPS

PIONEER

POLAROID

PORTLAND

PROSCAN

PROTON

QUASAR

RADIO SHACK

RCA

REALISTIC

ROCTEC

RUNCO

SAMPO

SAMSUNG

SANYO

351

043

019 081

265 270

096

034 056 080 092 164 208

197 003 059 060 064 164 004 024 056 063

164 005 093 038 197 003 004 059 127 184 206 239 259

135 025 197 018 023 116 190 234 335

138 268 328 353 354 356 388

004 143

144 160 161 165 167

004 131 058 143 171 173 193

034 056 092

019 004 143 043 127

160 165 065 156 144 161 197 004 024 056 152 023 074 333

007 019 043 047

062

187

ELECTROHOME

EMERSON

143 024 076 196

028 048 043 155 005 197 004 047 050 051 076 096 143 151

153 154

007 057

324

323

198 246 346

028 043

FISHER

EPSON

ESA

FUJITSU

FUNAI

FUTURETECH

GATEWAY

043

242 268

186

168 169 178 179 180 181 182 183 073 157 340

197 058 004 202

050 089 101 105 004 127 143 160 228 229 258

166 007 020 053 057 082 187

160 144 165 073 197 008 009 034 056 074 130 155 161 004

091 157 183

113 116 102 004 106 112 119 127 143

004

GOLDSTAR

HALL MARK

HANNSPREE

HITACHI

HYUNDAI

INFINITY

INFOCUS

INSIGNIA

JBL

SCEPTRE

SCOTT

SEARS

SELECO

SHARP

SIEMENS

SIM2

276

381

028 043 004 048 143

015 030 004 007 028 057 143 094 160 082 165 166

189 200 205 227

081 019 014 170 028 029 004 022 143 175 251

011 163 166 004 009 010 012 023 075 143 158 072

316 327 378

337 338

164

230 330 333

350

164

088

189 200 205 227

072

231 232

SIGNATURE

SOLE

JCPENNEY

JENSEN

JVC

004 024 197 008 009 030 065 101 143 156 160

013

SONY

070 139 147 126 185 194 085 213 277 279

028 004 003 043

112

SOUNDESIGN

SPECTRICON

SSS

038 034 070 083 145 199 210 240 241

043

KEC

004 043

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

SUPRE MACY

CODE NUMBERS

BRAND

CODE NUMBERS

004 103 003 039 042 046 053

002

328

ABC

SVA

ADELPHIA

ADVANCED NEWHOUSE

ALTRIO

AMERICAST

ARCHER

043 074

043

099

SYLVANIA

SYNTAX OLEVIA

TANDY

197 003 059 060 063 064 164 044 160 127

376

081

056 062

TATUNG

005 007 014

TECHNICS

TECHWOOD

TEKNIKA

TELEFUNKEN

TELERENT

TERA

034 080

004

ARMSTONG

AT&T BROADBAND

ATLANTIC BROADBAND

BELL SOUTH

BLUE RIDGE

BRESNAN

BRIGHT HOUSE

BUCKEYE COMM

CABLEVISION

CENTURION

CENTURY

074

043 074

099

043 074

074

043 110

074

043 074 108

092

007

043 074

002 003 004 024 028 043 072 101 143

037 046 086 087

072

172

TMK

004

TOSHIBA

TOTEVISION

UNIVERSAL

VIDEO CONCEPTS

VIDIKRON

VIDTECH

015 138 030 007 040 062 101 325

143

008 009

146

174 184 188 192 340

004

CHARTER

CITIZEN

007

VIEWSONIC

VIZIO

WARDS

WESTING HOUSE

WINBOOK

YAMAHA

YORK

242

386 387

COGECO

074

080 081

043 074 110

074

043 074

101

020 030 040

COMBANO

COMCAST

COMSAT

COX DIGITAL

DIGICABLE

EAGLE

004 008 009 019 028 060 061 063 064 072 074 143 164 034

076 280

339

197 004

004

YUPITERU

ZENITH

ZONDA

043

EASTERN

057 066

106

032

008 054

073 072 095 103 157 183 243 284

112

ECHOSTAR

ELECTRICORD

GEMINI

GENERAL ELECTRIC

GENERAL INSTRUMENT

GNC

072

074 103 104

099

GOLDEN CHANNEL

HAMLIN

030

049 050 055

HITACHI

103 055

INSIGHT

074

JERROLD

074 004 103 002 003 008 009 010 069

MAGNAVOX

MASSILLON

MEDIA ONE

MEDICOM

MEMOREX

MITSUBISHI

MOTOROLA

MOVIE TIME

MOXI

010 012 064 079 095 094

074

107

074

052

102

074 110 109 111

028 032

111

NCTC

074

NSC

015 028 038 071

OAK

031 037 053

PACE

043 074

PANASONIC

PARAGON

PHILIPS

044 047

052

006 012 013 020 085 095

PIONEER

043 103 034 051 063 076 105

PRUCER

PULSAR

RCA

RCN

059

052

047

074

098

RECOTON

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

CODE NUMBERS

BRAND

CODE NUMBERS

REGAL

049 050

057

043

AIWA

146

098

REGENCY

RODGERS

ALPINE

APEX DIGITAL

ARCAM

CAMBRIDGE AUDIO

CARY AUDIO DESIGN

CLASSE

087 111 115 112 116

SAMSUNG

SCIENTIFIC ATLANTA

SEREN

SERVICE ELECTRIC

SHAW

030

122

215

174

167

043 011 003 041 042 045 046

043

074

COBY

258

SIGECOM

043

DENON

007 080 173

SONY

096 108

FUNAI

143

SPRUCER

STARCOM

STARGATE

SUSQUEHANNA

TIME WARNER

TOCOM

047 078

GATEWAY

GO VIDEO

HARMAN KARDON

HITACHI

ILO

INTEGRA

JVC

KENWOOD

KISS

KLH

KRELL

LEXICON

175

026 027

137 218 220 221 222

084 140

101

268

142 180

012

151

179 279

135

104

148

091 057 074

002 004 008 009

008 030 097 104

043 074

039 040 056

052

004 053

005 007 014 032 035

043

012 015 018 086 087 088 089

043 099

052 060 093 100

TOSHIBA

UNITED CABLE

UNIVERSAL

VIDEOTRON

VIEWSTAR

WIDE OPEN WEST

ZENITH

LITEON

264 265

MAGNAVOX

MALATA

MARANTZ

MERIDIAN

MITSUBISHI

MYRYAD

NAD

066 096

267

083 095

153

017

102 134

088 155

NAKAMICHI

ONKYO

103

076 035 180

OPPO

266

PANASONIC

PHILIPS

021 042 138 139 144 150

066 083 095 105 166

PIONEER

POLAROID

PRIMARE

PROCEED

PROSCAN

RCA

023 092 099 107 108 131

233 234 237

193 194

086

026 027

PJTECH

269

ROTEL

204

SAMSUNG

SANSUI

056 070 119 165 170 137 159

154

SANYO

147

SENSORY SCIENCE

SHARP

222 223

094

SONY

033 118 145 126 191

SYLVANIA

SYMPHONIC

TAG MCLAREN

TATUNG

TEAC

143

156

102

270

THOMPSON

THULE

026 027

177

TOSHIBA

VENTURER

035 034 130 141 164 188

149

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

CODE NUMBERS

BRAND

CODE NUMBERS

VINC

161

AIWA

AKAI

034 161

YAMAHA

ZENITH

042 089 166 195 197

057 074 091

016 146 043 046 124 125 142

AMPRO

072

ANAM

031

DVD-TV/DVD Combos

AIWA

FUNAI

SAMSUNG

SYLVANIA

SYMPHONIC

TOSHIBA

AUDIO DYNAMICS

BROOKSONIC

CANON

CAPEHART

CRAIG

012 023 039 043

035 037 129

028 031

108

003 040 135

031 041

111 116 117 119 005 007 010 065 108 110 112

146

143

165

143

130

CURTIS MATHES

DAEWOO

DAYTRON

DBX

DYNATECH

ELECTROHOME

EMERSON

108

DVD-TV/DVD/VCR Combos

MAGNAVOX

PANASONIC

SYLVANIA

TOSHIBA

012 023 039 043

034 053

059

006 029 035 017 025 027 031 034 036 037 046 101 129 131

138 153 162 116

143

144

143

164

FISHER

003 010 008 009

DVD-DVD/VCR Combos

GO VIDEO

PANASONIC

PHILIPS

POLAROID

SAMSUNG

SANSUI

FUNAI

034

137 218

150

031 072 147 063 107 109 144

132 136 155 040 115

101 106 114 013 020 012 123

012 045

004 026 150 018 034 043 063 137 160 013

031

GO VIDEO

GOLDSTAR

HARMAN KARDON

HITACHI

INSTANTREPLAY

JCL

105 (VCR Functions for VCR 067)

234

137 159

154

SONY

145 191

TOSHIBA

ZENITH

141

JCPENNEY

JENSEN

JVC

012 013 015 040 066 101

043

048 043 130 150 055 060 012 031 050 152 166

091 (VCR Functions for VCR171)

DVD-DVD Recorders

GATEWAY

GO VIDEO

ILO

KENWOOD

LLOYD

014 048 034 047

101 106 114 013 020 012 123

034

175

220 221 222

268

LXI

034 003 009 017 106

KISS

279

MAGIN

040

LITEON

265

139

222

191

MAGNAVOX

MARANTZ

MARTA

MATSUI

MEI

067 031 034 068 041 156 164

067 069 012 031 156

101

027 030

PANASONIC

SENSORY SCIENCE

SONY

TOSHIBA

188

031

MEMOREX

MGA

101 003 010 014 031 034 053 072 102 134 139

045 046 059

MINOLTA

MITSUBISHI

MTC

013 020

059 061 151 013 020 045 046 051 142 049 168

034 040

MULTITECH

NEC

024 034

012 023 039 043 048

NORDMENDE

OPTONICA

ORION

043

053 054

025

PANASONIC

PENTAX

PHILCO

066 070 145 083 133 140 157 163 074 167

013 020 031 063

031 034 067

PHILIPS

031 067 034 101 054 071 156

PILOT

101

PIONEER

PORTLAND

PULSAR

QUARTZ

QUASAR

RADIO SHACK

021 013 048

108

072

002 014

066 145 075

123

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

CODE NUMBERS

107 109 144 147 158 041 145 013 020 140 034 040

BRAND

CODE NUMBERS

RCA

ADC

007

REALISTIC

RICO

003 008 010 014 031 034 040 053 054 101

ADCOM

082 092 225 161 269 355 356 366

170 018 104 202 203 213 211 188

058

AIWA

RUNCO

148

AKAI

138 189

SALORA

SAMSUNG

SANSUI

014

AMC

AMEND

AMX

125 126 127 128 258 281 282 038

054

196

102 104 113 115 112 120 032 040 066 107 109 122 125

022 043 048 135

SANYO

SCOTT

003 010 007 014 134 102

017 037 112 129 131

ANGSTROM

ANTHEM

142

335 336 337 338 339

SEARS

003 008 010 014 081 013 101 009 017 073 112

ARCAM

141 418 419

SHARP

149 054 031 159 165

024

034

056 057 058 077 052 003 078 076 031 149 154

034

013

031 034 059 067

034

010 034

039 043

ATLANTIC TECHNOLOGY

AUDIO ACCESS

AUDIO ALCHEMY

AUDIO DESIGN

AUDIO EASE

AUDIO FILE

AUDIO MATRIX

AUDIO SOURCE

AUDIO TECHNICA

B & K

342

147

135

194 221 011

021 196 207

071

167

273

SHINTOM

SIGNATURE

SONY

SOUNDESIGN

STS

SYLVANIA

SYMPHONIC

TANDY

TATUNG

TEAC

134

096 097

034 039 043

BOSE

070 170 224 347 409 459 460 532

TECHNICS

TEKNIKA

THOMAS

TMK

031 070

031 019 034 101

034

006

BOSTON ACOUSTICS

BRYSTON

CAMBRIDGE AUDIO

CARVER

447

023

522

006 028 061 071 201 214 226 180 185 022 029 077 284

TOSHIBA

TOTEVISION

UNITECH

VECTOR RESEARCH

VICTOR

112 131 079 008 059 047 082 013 042 081

040 101

040

012

CASIO

CHIRO

CINEMA SOUND

CITATION

CLARION

076

140

034 134

148 272

048

026

VIDEO CONCEPTS

VIDEOSONIC

WARDS

YAMAHA

ZENITH

012 034 046 141

040

003 013 017 024 031 034 040 053 054 131

012 034 039 043

072 080 056 048 101 034 058

CLASSE

COMPAQ

CURTIS MATHES

DELPHI

DENON

537

382

076

415 515

002 034 109 215 229 230 027 037 234 259 330 340 341 349

350 400 401 402 444 564

VCR-TV/VCR Combos

DAEWOO

EMERSON

FUNAI

GOLDSTAR

HITACHI

JCPENNEY

LLOYD

MAGNAVOX

MEMOREX

PANASONIC

PHILIPS

RADIO SHACK

RCA

EAD

EIGER

ELAN

ENLIGHTENED AUDIO

ESCIENT

FANFARE

FISHER

FLEXTRONICS

FOSGATE

FOSGATE AUDIONICS

GOLDSTAR

HAFLER

HARMAN KARDON

HITACHI

466

149

057 290

099 098

368 381 451 452 453 454

352

047 214 180 182 297

378

062 231

342

056 260

008

005 117

153

034

101 123

034

101

101 123

034

034 067

101

070 167

034 067

123

174

231 233 254 153 154 118 121 227 277 317 318 365

020

034

SEARS

101

IMERGE

371

SONY

057 154

067

034

INKEL

INTEGRA

JAMO

197

354 438

398

263

076 216

206

058

SYLVANIA

SYMPHONIC

THOMAS

ZENITH

JBL

JCPENNEY

JEFF ROWLAND

JENSEN

JVC

240 163 191 114 266 279 291

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

KENWOOD

CODE NUMBERS

026 066 145 146 181 190 197 192 182 199 151 222 180 005

BRAND

TOSHIBA

WARDS

YAMAHA

CODE NUMBERS

060 087 198 278

180

280 374 550

220 140

331

216 573

KINERGETICS

KLH

026 253 169 067 173 205 264 232 089 264 274 285 332 373

432 433

143 210

KOSS

ZENITH

KRELL

150 072 376 384

KYOCERA

LEXICON

LINN

LUXMAN

LXI

MAGNAVOX

MARANTZ

MCINTOSH

MCS

007

AUDIO-XM Radios & Tuners

BOSE

DELPHI

120 235 236 237 357 358 359 360 361 362 363 364

124 377

137 139 052 165 115 004 009

076 056

086 164 152 208

006 028 031 040 063 185 186 251 265 119 289 296 492

238 286

076

170 532

415 515

352

550

515

FANFARE

KENWOOD

POLKAUDIO

SONY

380

MERIDIAN

MITSUBISHI

MONDIAL

MYRYAD

NAD

100 012 013

242 243 204

157 158 042 043 081 112

276 293

186 113 283 478 479

NAKAMICHI

NEC

111 244 245 172 183 287

176

NIRO

343

NILES

403

ONKYO

017 046 064 107 108 187 079 080 090 179 209 270 275 438

OPTIMUS

OUTLAW

PANASONIC

PARASOUND

PHAST

026 041 138

342

032 195 219 177 292 383 516

129 130 132 261 294 295 333 334

196

PHILIPS

249 250 251 063 119

PIONEER

POLKAUDIO

PRIMARE

PROCEED

RCA

014 033 039 044 045 050 069 159 168 116 035 078 198 480

029 515

464

144 268

010 048 117 156 067 288

REALISTIC

REQUEST

REVOX

019 056 073 075 095

351

162

ROTEL

074 083 085

RUSSOUND

SAMSUNG

SANSUI

SANYO

379 391 392

016 571

040 048 110 119 065 228

047 059

SCOTT

019 091

SEARS

076

SHARP

026 094 131 175 181

SHERWOOD

SONY

024 038 055 102 103 105 106 051 030 447

018 093 223 247 248 160 166 015 101 184 218 271 353 369

372 380 417 421

SOUNDESIGN

SOUNDMATTERS

SOUNDSTREAM

SSI

036

375

084 088

068

SUMO

171

SUNFIRE

344 345 346 494

TAEKWANG

TEAC

TECHNICS

THETA DIGITAL

138

005 019 049 111 212 217

122 176 193 219 178 177 200 257 262

136

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

CODE NUMBERS

BRAND

ADCOM

CODE NUMBERS

SAT

062 042

CABLEVISION / VOOM

DIRECTV

148

173

AIWA

AKAI

059 065 088 089 105 122 170 187

085 195 202

ECHOSTAR / DISH

EXPRESSVU

GENERAL ELECTRIC

GENERAL INSTRUMENT

GOI

122 167 168

122

151 106 150

148

122

139 140

122

AMC

AMEND

ARCAM

AUDIO ACCESS

AUDIO EASE

AUDIO TECHNICA

BSR

231 232

118

238

119 147

165

046

037 057

HITACHI

HTS

HUGHES

JVC

MAGNAVOX

MEMOREX

MITSUBISHI

MOTOROLA

NEXT LEVEL

PANASONIC

PANSAT

161 162 068 154 165 166 108 117

122

170

136

068 154

148

CALIFORNIA AUDIO

CAPETRONIC

CARRERA

CARVER

CASIO

CLARINETTE

CREEK

CROWN

DENON

EMERSON

FISHER

103 008

063

057 080

185 041 044 050 086 107 130 134 135 138 139 203 204 167

111 182

182

159

035

002 123

042 069 102

050 185 134 008

142 160

172

136

PAYSAT

PHILIPS

152 153 156 068 154 136 108 117

FRABA

111

PROSCAN

RADIOSHACK

RCA

151 106 150

148

151 106 150

GENEXXA

GOLDSTAR

HAITAI

010 069 102

080

093

SAMSUNG

SKY

123 155 163 169 175

164

HARMAN KARDON

HITACHI

018 033 047 208

042 175

SONY

103

INKEL

130 143 144

STAR CHOICE

TOSHIBA

148

JCPENNEY

JENSEN

014 061 092 141

158

127 068 154 157 158

UNIDEN

ZENITH

136

159

JVC

KENWOOD

KOSS

004 022 136 163 213 214 242 243

185 007 023 055 071 072 142 137 254

061

DVR-PVR, TIVO

DISH

ECHOSTAR

HUGHES

HUMAX

JVC

PHILIPS

RCA

REPLAY NETWORKS

SONY

TIVO

KRELL

KYOCERA

LOTTE

LUXMAN

LXI

MAGNAVOX

MARANTZ

MCINTOSH

MCS

MEMOREX

MISSION

MITSUBISHI

MITSUMI

MODULAIRE

MONDIAL

MYRYAD

NAD

241

005

102

122

108 117

117 118

122

108 090 117

109

011 028 070 076 249 252

059

044 107

027 041 044 051 077 107 209 246

212 247

014 073 092

010

044 107

179

153

182

147

244 155

006 005 067 178

217 218 219 095

014 062

075

104 105

090 117 118

117

TOSHIBA

NAKAMICHI

NEC

NIKKO

046

NSM

044 107

ONKYO

030 038 039 168 169

010 050 057 058 081 082 083 085 093 195

103 201 172 008 068 248

233 240

041 044 107 246 253

010 020 025 056 174 175 176

OPTIMUS

PANASONIC

PARASOUND

PHILIPS

PIONEER

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

PROCEED

PROTON

QUASAR

RADIO SHACK

RCA

REALISTIC

ROTEL

CODE NUMBERS

BRAND

DENON

CODE NUMBERS

239

206 207

120

152 013

032 121

211

044 107 228

103 008

182

FUNAI

KENWOOD

MAGNAVOX

MARANTZ

MITSUBISHI

NAD

017 042 150

042 050 051 102 181 182 187

044 107 161 178 250

121

SAE

SANSUI

SANYO

044 107

044 069 107 128 171 190 125

050

OPTIMUS

PANASONIC

PHILIPS

049 013

113

032

SCOTT

SHARP

SHERWOOD

SIGNATURE

SONY

069 102

026 031 051 066

003 019 051 096 112 115 119 166

033

PIONEER

RADIO SHACK

RCA

REALISTIC

RUNCO

106 117 121

120

002

049

127

048 081 097 126 133 177 225 226 164

SOUNDESIGN

SUMO

SYLVANIA

SYMPHONIC

TAEKWANG

TANDY

251

155

044 107

052 181

195 085

010

SANYO

SHARP

SONY

TECHNICS

THETA DIGITAL

TOSHIBA

YAMAHA

075

152 013

053 110

113

032

152 106

043 129

TEAC

015 034 036 051 052 101 131 140 079

TECHNICS

TECHWOOD

THETA DIGITAL

TOSHIBA

VECTOR RESEARCH

VICTOR

060 103 200 172 184 008 068

076

234 235

006 067 091 160 148

080

004 022 114 124

185 033

WARDS

YAMAHA

YORX

024 046 054 186 183 245

182

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

CODE NUMBERS

BRAND

CODE NUMBERS

TAPE

AIWA

APPLE

152

164

401

155

220

191

409

221

015 071 100 114

CARVER

DENON

FISHER

GOLDSTAR

HARMAN KARDON

JVC

006 008 027 024 036

105 227 229

064

011

233

ARCHER

AURORA MULTIMEDIA

AUTON

BOSE

106 116 239 240

005 013 023 026 064 145 146 181 190

124

CELADON

CRESTRON

DELL

KENWOOD

LINN

213 214 215 216 217 218

261 262

LUXMAN

MAGNAVOX

MARANTZ

MCINTOSH

MITSUBISHI

NAD

035 137 139

027

014 027 056 065 087

238

242 243

DMX

156

204

097

080 253

206

151

DRAPER SCREEN

DREAMVISION

DWIN

EVERQUEST

EXTRON

029 048

NAKAMICHI

ONKYO

OPTIMUS

PANASONIC

PHILIPS

244 245 025

002 012 016 017 018 019 115

026 054 055

007 010 032 088 195

027 087

FAROUDJA

FUJI

GATEWAY

HAUPPAUGE

184

209

261 262

294 295

261 262

PIONEER

QUASAR

SANSUI

SHARP

SHERWOOD

SONY

003 039 047 050 066 098 222

007 088

HUNTERDOUGLAS

JERROLD

JVC

KENSINGTON

KENWOOD

KEYSPAN

MAKITA

219

153

185

406

185

297

186 201

027 113 119 224

026 057 131 175 181

038 004 028 030 033 034

020 022 052 084 089

009 059 212

TEAC

TECHNICS

TOSHIBA

VICTOR

007 010 076 088 109 122 193

112

106

MICROSOFT

MINDPATH

NILES

408 107

205

160 187

YAMAHA

021 026 031 067 040

NSM

161

PIANO DISC PLUS

POLKAUDIO

RUSSOUND

SCIENTIFIC ATLANTA

SIMA

085

162

081

163 156

082

207

078 079

PHONO

JVC

KENWOOD

PIONEER

YAMAHA

004

005

003

001 002

SOLO ELECTRONICS

SOMFY

LIGHT

SONY

164 165 166 261 262

LITE-TOUCH

LUTRON

X-10

208 212

158 159 077

183 093

STARCOM

TURBOSCAN

VELODYNE

XANTECH

153

167

203

168 169 170 171 172 188 189

AUX-Media PC Controls

DELL

GATEWAY

HAUPPAUGE

KEYSPAN

SONY

TOSHIBA

261 262

294 295

261 262

297

261 262

WINBOOK

AUX - XBox Controls

MICROSOFT/XBOX

408 107

AUX-iPod Controls

APPLE/iPod

401

Download from Www.Somanuals.com. All Manuals Search And Download.

BRAND

BOSE

KENSINGTON

CODE NUMBERS

NOTES

409

406

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently Asked Questions

Warranty

What is a “macro” button?

Universal Remote Control’s Mastercontrol RF30 is

covered against any manufacturers defects or

workmanship for a period of one year from the date of

purchase if purchased from an authorized Universal

Remote Control dealer. Units purchased from online

auction sites or other unauthorized resellers have no

warranty. This warranty does not cover the following

items:

A “macro” is a button on the RF30 that you setup to make

a lot of things happen when you press it. For example, to

watch a DVD in most home theaters requires several

remote controls and many button presses (power up the

TV, power up the surround sound, power up the DVD

player, set the TV to the correct video input, set the

surround sound to the correct audio input and finally;

press play on the DVD player remote control).

- Damage from misuse, neglect, or acts of nature

- Products that have been modified or incorporated

into other products

- Products purchased more than 12 months ago

- Units purchased from unauthorized dealers or

companies

Instead of pressing all of those buttons one at a time, the

RF30 enables you to setup one button that does all those

steps automatically with one press. For more information

on how and why you should setup macro buttons, watch

the Quick Setup DVD Program Guide or refer to pages

26-29 in this Manual.

If the batteries run out, will I lose my settings?

No. The RF30 stores all of your settings in non-volatile

FLASH memory. You could remove the batteries for

months, replace them at your convenience, and the RF30

would still remember your settings.

Specifications

Learning Capability - 1200 IR commands at standard

frequencies (15kHz to 100kHz)

Macro Capability - 658 Macros of up to 190 steps each

IR Range (Line of Sight via Infrared): 30-50 feet, depending

on the environment

Who can I call for more answers?

The Universal Remote Control Technical Support and

Customer Service staff are ready to answer any questions

you might have.

RF Range (radio frequency): 50 to 100 feet, depending

upon the environment

Call us at 1-914-835-4484

Monday - Friday, 9AM to 6PM (EST)

RF Frequency: 418MHz

Weight: 7.1 oz. (with batteries)

Size: 8.5”x 2.5”x 1”

Batteries: Four AAA Alkaline batteries included

LCD Size: 1.38” x 1.88”

Download from Www.Somanuals.com. All Manuals Search And Download.

500 Mamaroneck Avenue

Harrison, NY 10528

Phone: 1-914-835-4484

FAX: 1-914-835-4532

www.universalremote.com

OCE-0046C_rev01

Download from Www.Somanuals.com. All Manuals Search And Download.

TDK Network Card DEA Series DEA252450BT 7012D1 User Manual
Texas Instruments Car Amplifier TPA2011D1 User Manual
Thermo Products Furnace OME Series User Manual
Thule Automobile Accessories 934 User Manual
Toshiba DVD Player SD P2900 User Manual
Transition Networks TV Converter Box E TEL 1200 User Manual
Tributaries TV Cables HXC6IR User Manual
Tripp Lite TV Cables P106 06I User Manual
Universal Remote Control Universal Remote MX 880 User Manual
Wagner SprayTech Paint Sprayer 276040 User Manual