Tributaries TV Cables HXC6IR User Manual

over CAT6 with IR Control  
HXC6IR  
Extends HDMI 140 feet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To double your maximum distance, add the Tributaries HXC6R Repeater  
(optional). This passive device can be inserted at the end of the appropriate  
length of CAT6 cable run from the Tributaries HXC6IR transmitter unit. A similar  
length of CAT6 can be run to the Tributaries HXC6IR Receiver unit. The HXC6R  
supports all the features of the HXC6IR.  
It is possible to substitute CAT5E cable for the CAT6. However, the maximum  
resolution capability will be limited to 1080p/8 bit color, HDMI v1.2.  
All units are HDMI v1.3 certified supporting 12 bit Deep Color and new lossless  
compressed Digital Audio: Dolby TrueHD®, Dolby Digital Plus and DTS®-HD  
Master Audio with a bandwidth up to 2.25 GHz.  
2. Features  
Extends 12 bit color 1080p resolution up to 20 meters over dual CAT6.  
Extends 8 bit color 1080p resolution up to 45 meters over dual CAT6.  
Supports IR signal transmission from remote source to display over same dual CAT6.  
Supports the full range of IR frequencies from 20-60KHz.  
Supports new lossless compressed Digital Audio like Dolby TrueHD, Dolby Digital  
Plus and DTS-HD Master Audio.  
Equalization and timing of incoming TMDS data signal prior to re-transmission.  
Supports HDMI input and output cables up to 15 meters.  
CAT6 can be cascaded using Tributaries HXC6IR repeater for greater distance.  
Compliant with HDMI 1.3 HDCP 1.1 and DVI 1.1 standards.  
Supports CEC bypass.  
Supports xvYCC.  
3. Package Contents  
HXC6IR-TX Transmitter  
HXC6IR-RX Receiver  
IR receiver cable  
IR blaster cable  
Two 5V/1A universal power supplies  
Operation manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
4. Operation Controls and Functions  
4.1 Transmitter  
POWER 5V  
HDMI INPUT  
Transmitter  
VIDEO  
DOC  
CAT6 OUTPUT  
1
2
3
4
5
IR Transmitter: Connect IR blaster cable included in box to this input. Place the  
eye of the blaster in front of the source equipment. The IR blaster accepts a  
frequency range from 20 KHz to 60 KHz.  
1
HDMI Input: Connect the HDMI cable from your source's HDMI output  
Power 5V: Connect the 5 volt power supply included in box  
2
3
4
DDC CAT6 Output: Connect the DDC output of the Transmitter to the DDC  
input of the Receiver using CAT6 cable. CAT5E cable can be used if available  
with the same result.  
5
VIDEO CAT6 Output: Connect the Video Output of the Transmitter to the  
Video input of the Receiver using CAT6E / 23AWG / solid cable. Note: using a  
Cable with different specification may result in different distance capabilities.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
4.2 Receiver  
POWER 5V  
HDMI OUTPUT  
VIDEO  
DOC  
CAT6 INPUT  
1
2
3
4
5
Power 5V: Connect the 5 volt power supply included in box  
HDMI Output: Connect an HDMI cable from your Display  
1
2
3
IR Receiver: Connect the IR receiver cable (included) to this input. Place the  
eye in front of the display, then use the existing remote to control the source  
equipment. The IR receiver accepts a frequency range from 20 KHz to 60 KHz.  
4 VIDEO CAT6 Input: Connect the Video output of the Transmitter to the video  
input of the Receiver using CAT6E / 23AWG / solid cable.  
DDC CAT6 Input: Connect the DDC output of the Transmitter to the DDC input  
of the Receiver using CAT6 cable. CAT5 cable can be used if available with the  
same result.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5. Pin Assignments  
5.1 IR Pin Assignments  
5.2 RJ45 Pin Assignments  
Pin  
1
2
3
4
5
6
7
8
VIDEO  
DDC  
SCL  
N/A  
TMDS2+  
TMDS2-  
TMDS1+  
TMDS1-  
TMDS0+  
TMDS0-  
TMDSC+  
TMDSC-  
SDA  
POWER 5V  
GROUND  
IR  
HPD  
CEC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
6. Specifications  
Transmitter  
1 X HDMI  
1 X IR Blaster  
1 X CAT6 Output VIDEO  
1 X CAT6 Output DDC  
Receiver  
1X HDMI  
1 X IR Receiver  
1 X CAT6 Input VIDEO  
1 X CAT6 Input DDC  
HDMI Input/Output Cable 1080p 8-bit (15M), 12-bit (15M)  
CAT6 Cable  
Power Supply  
Dimensions  
1080p 8-bit (45M), 12-bit (20M)  
5V/1A, universal CE/FCC/UL Certified  
Transmitter: 3”(W) x 4.5”(D) x 1.2”(H)  
Receiver: 3”(W) x 2.8”(D) x 1.2”(H)  
Weight  
Transmitter: 7 oz.  
Receiver: 3 oz.  
Operating Temperature  
Storage Temperature  
32F - 104F  
-4F - 140F  
7. Connection and Installation  
Video  
HDMI  
Cable  
CAT 6  
DDC  
HDMI  
Cable  
DVD Player  
Transmitter  
Receiver  
HDMI LCD TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
©2010 Gordon J. Gow Technologies, Inc. All rights reserved.  
TRIBUTARIES® is a registered trademark of Gordon J. Gow Technologies, Inc. All other trademarks are  
the property of their respective owners. As we continually strive to improve our products, TRIBUTARIES®  
reserves the right to change product specifications without notice. The technical and other information  
contained herein is not intended to set forth all technical and other specifications of TRIBUTARIES®  
Gordon J. Gow Technologies, Inc.  
Orlando, FL 32809  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Taylor Blood Pressure Monitor 7009 User Manual
Toshiba Printer B 670 QQ User Manual
Toshiba TV DVD Combo 15DLV77 User Manual
Triarch Fan CF 3000 User Manual
Tricity Bendix Cooktop CSE560 User Manual
Troy Bilt Lawn Mower J609 User Manual
Turbosound Portable Speaker NuQ SERIES User Manual
Turtle Beach Headphones X31 User Manual
Wayne Dalton Pacemaker 3973C User Manual
Weed Eater Lawn Mower 186391 User Manual