USER MANUAL
L43** Digital Series
W43** Digital Series
Download from Www.Somanuals.com. All Manuals Search And Download.
Licence information.................................................... 91
During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance:
If your TV is connected to the internet, firmware will be automatically made available.
If your TV is not connected to the internet, you can download the latest version of firmware from
*Some features are limited due to local legislation and may not be available in all countries.
Download from Www.Somanuals.co3m. All Manuals Search And Download.
INSTALLING YOUR TV
Safety Precautions
DO NOT REMOVE ANY FIXED COVERS AS THIS
WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.
This equipment has been designed and manufactured to
meet international safety standards but, like any electrical
equipment, care must be taken to obtain the best results
and for safety to be assured. Please read the points below
for your own safety. They are of a general nature, intended
to help with all electronic consumer products, and some
points may not apply to the goods you have just
purchased.
THE MAINS PLUG IS USED AS THE
DISCONNECTING DEVICE AND THEREFORE
SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and shorten
the life of the equipment.
Air Circulation
Leave more than 10 cm clearance around the television to
allow adequate ventilation. This will prevent overheating
and possible damage to the television. Dusty places
should also be avoided. For wall mounted positions at
least 2.5 cm gap was retained from the wall and the 10 cm
was kept clear around all edges of the TV.
DO NOT allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids, such as
vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources, such
as lighted candles or nightlights on, or close to equipment.
High temperatures can melt plastic and lead to fires.
Heat Damage
WARNING: To prevent the spread of
fire, keep candles or other open flames
away from this product at all times.
Damage may occur if the television is left in direct sunlight
or near a heater. Avoid places subject to extremely high
temperatures or humidity. Place in a location where the
temperature remains between 5 °C min. and 35 °C max.
DO NOT use makeshift stands and NEVER fix legs with
wood screws.
Mains Supply
The mains supply required for this equipment is 220-240 V
AC 50 Hz. Never connect to a DC supply or any other
power source. DO ensure that the television is not
standing on the mains lead.
DO NOT cut off the mains plug from this equipment, this
incorporates a special Radio Interference Filter, the
removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.
DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make sure
your family knows how to do this. Special arrangements
may need to be made for people with disabilities.
DO NOT continue to operate the equipment if you are in
any doubt about it working normally, or it is damaged in
any way – switch off, withdraw the mains plug and consult
your dealer.
Do
DO NOT push/pull CI CAM at a tilt to prevent breakdown
of COMMON INTERFACE.
DO read the operating instructions before you attempt to
use the equipment.
WARNING: Excessive sound pressure from earphones
or headphones can cause hearing loss.
DO ensure that all electrical connections (including the
mains plug, extension leads and inter-connections
between pieces of equipment) are properly made and in
accordance with the manufacturers’ instructions. Switch
off and withdraw the mains plug before making or
changing connections.
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen and cabinet
back, or push anything into holes, slots or any
other openings in the case. These actions will
damage screen or internal parts.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe
than sorry.
WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with the
installation instructions. See page 5.
DO be careful with glass panels or stands on equipment.
DO use a soft, dry cloth to clean the unit.
Download from Www.Somanuals.co4m. All Manuals Search And Download.
INSTALLING YOUR TV
Installation and important information
Where to install
Locate the television away from direct sunlight and
strong lights. Soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
direct sunlight falling on the screen.
Screw
(supplied)
9 mm
20 mm
4 mm
Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
injury and maintain stability of this apparatus,
secure the TV using the fixing in the stand.
Stand style is dependent on model
The LCD display panels are manufactured using an extremely high level of precision technology; however,
sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not
a sign of a malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure
will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or
openings in the case.
Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal.
Studies indicate that plastics may weaken and crack over time from the combination effects of
chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could
result in serious injury and/or permanent damage to TV and TV pedestal.
When using a Wall Bracket
Use a wall bracket appropriate for the size and weight of
the LCD TV.
Removing the Pedestal Stand:
1
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave
the stand protruding over the edge of the surface.
• Two people are required for installation.
• Install a wall-mount from another manufacturer.
1
2
3
Unplug and remove any cables and/or other
component connectors from the rear of the TV.
NOTE: Extreme care should always be used when
removing the pedestal stand to avoid damage to the
LCD panel.
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.
2
Remove the screws.
Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the
TV as described in the instructions provided with the
wall bracket.
Screws
4
Always use the screws supplied or recommended by
the wall mount manufacturer.
3
Once you have removed all screws holding the
pedestal stand in place, remove the pedestal stand
from the TV by sliding the pedestal stand away from
the TV.
When using MHL (Mobile High-definition Link)
• Interoperability with MHL devices of other
manufacturers is not guaranteed.
• If the MHL does not work properly, also contact the
manufacturer of the source device for advice on its use.
• Toshiba does not provide any guarantee, therefore,
against operational failure such as that described below
when an MHL source is connected to the TV.
- No picture or sound
- Some of the functions do not work by remote
operation from the TV
Download from Www.Somanuals.co5m. All Manuals Search And Download.
INSTALLING YOUR TV
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country”
section of the “Installation” menu. Depending on country/area, some of this television's functions may not
be available. Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer
displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they
could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at
the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty.
Regular use of other size modes (e.g.: Super Live) will prevent permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) Fire;
ii) Earthquake;
iii) Accidental damage;
iv) Intentional misuse of the product;
v) Use of the product in improper conditions;
vi) Loss and/or damage caused to the product whilst in the possession of a third party;
vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the
owner’s manual;
viii)Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously
with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but
not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.
When Using a USB Hard Drive (HDD)
• The recording function has been designed for
private use and entertainment in your home
environment. Please note that any
commercial use of the recording function
could lead to copyright infringement of
authors’ rights. Toshiba asks you to respect
the intellectual property rights of third
parties.
• Toshiba shall not be liable for damages of any
kind whatsoever (breakdown of the recording
device, modification or loss of the recorded
content, etc.) resulting from malfunction,
operating failure or incorrect operation due to
combining with another connected device.
• If you connect a USB HDD that has been used
with a PC or another TV, only programmes
which are recorded using this TV can be
playback.
• Before recording to a device connected to the
TV, make a test recording and check the
recording performance.
• Switch the TV to standby before you
disconnect the USB HDD.
• Programmes that are prohibited from copying
due to copyright protection cannot be
recorded.
Not doing so may result in loss of the recorded
data or malfunction of the USB HDD.
• Please note that recording on the USB HDD is
no longer playable after the TV’s main-board
is exchanged during service.
• Toshiba shall not be liable for compensation
or incidental damages of any kind
whatsoever resulting from content that was
not properly recorded on the recording
device or that was modified or lost.
Download from Www.Somanuals.co6m. All Manuals Search And Download.
INSTALLING YOUR TV
19
20
- Accesses the CLOUD HOME
- Accesses to premium content available
online
The remote control
Simple at-a-glance reference of your remote control.
21 To access the on-screen Menu
1
22 To display the digital on-screen Programme Guide
2
4
5
7
3
23
To page up, down, left or right
6
8
9
24 When using menus, the arrows move the cursor on the
screen up, down, left or right. Press OK to confirm your
selection
25 To return to previous Menu
10
26 To exit menus and applications
27 When in TV mode:
11
13
14
D Analogue time display
12
15
17
20
When in Text mode:
A
B
C
To reveal concealed text
To hold a wanted page
To enlarge text display size
16
18
D To erase Text pages temporarily when you
are viewing in teletext mode.
19
21
22
During Playback:
c
v
To PLAY
To STOP
23
25
24
26
W
To PAUSE
To SKIP-BACK
To REWIND
To FAST FORWARD
To SKIP FORWARD
Z
CC
cc
z
27
28
29
31
30
28 To access the analogue or digital Channel List
29 To call up text services
30 To record DTV programmes
31 Colour buttons: Text and interactive service control
buttons
Inserting batteries and effective range
1
2
3
4
5
6
7
For On/Standby mode
To select external input sources
To select TV Mode
Selectable Picture
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote control
are AAA, IEC R03 1.5 V.
Widescreen viewing
Picture still
Digital Subtitles or Analogue TEXT Subtitle pages if
available
Do not combine a used, old
battery with a new one or mix
8
9
s Stereo/bilingual transmissions
To access the sleep timer
battery types. Remove
exhausted batteries immediately to prevent acid from
leaking into the battery compartment. Dispose of them in
10 Number buttons
11 To switch the Audio Description On/Off
12 To return to previous channel
Warning: Batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
13 To display on-screen information
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need
replacing.
To access the index page in Text mode
14 To alter the TV volume
15 To change programme positions
To change TEXT pages
16 To mute the TV sound
17 To access Quick Menu
18
- Accesses the Search Portal
Download from Www.Somanuals.co7m. All Manuals Search And Download.
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no
switch, remove the mains plug from the wall socket.
DVB Common Interface
(for Conditional Access
Module (CAM))
ILLUSTRATION SHOWS 32L.
Headphones
HDMI (1~3)
USB (1~2)
Power cord
LAN port
HDMI 4 INPUT
DIGITAL AUDIO OUTPUT
(OPTICAL)
COMPONENT VIDEO/AUDIO INPUT
VIDEO/AUDIO INPUT (Y/L/R) (EXT 2)
SCART (EXT 1)
RGB/PC INPUT
LNB IN SATELLITE ANTENNA
(L436* series only)
Aerial
Satellite dish
Aerial Cable
Decoder*
* A Decoder can be digital Satellite, free to air or any
other compatible decoder / recorder.
Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . .
HDMI® (High-Definition Multimedia Interface) is for use
with electrical equipment with digital audio and video
output. It is designed for best performance with 1080i and
1080p high-definition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p
signals.
Connect the aerial to the socket on the rear of the TV.
If you use a decoder and/or a media recorder, it is
essential that the aerial cable is connected through the
decoder and/or through the media recorder to the TV.
Satellite cable: . . . . . . . . . . . . . . . . . . . . . . .
PC format signals will also be displayed.
Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . .
LAN port is used to connect the TV to your home network.
Connect the media recorder IN/OUT socket to the
television.
Connect the decoder TV socket to the television.
A wide variety of external equipment can be
connected to the back of the television; therefore, the
relevant owner’s manuals for all additional equipment
must be referred to for exact instructions.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
If the television automatically switches over to monitor
external equipment, return to normal television by
pressing the desired programme position button. To recall
external equipment, press o to select between TV,
EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC.
The RCA sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
When connecting the VIDEO/AUDIO devices, connect
those cables to Y/L/R sockets.
The Digital Audio Output socket enables the connection of
a suitable surround sound system.
When the external input mode is selected while viewing
DTV mode, the SCART socket does not output video/
audio signals.
NOTE: This output is always active.
Download from Www.Somanuals.co8m. All Manuals Search And Download.
CONNECTING YOUR TV
®
Connecting an HDMI device
HDMI’s ARC (Audio Return Channel)
feature
The HDMI input on your television receives
digital audio and uncompressed digital video
from an HDMI source device.
This feature enables the audio signal of the TV to be sent
to the AV amplifier via the HDMI cable. It will not be
necessary to connect a cable from the audio output of the
TV to the audio input of the AV amplifier to reproduce the
audio received from the tuner of the TV through the AV
amplifier.
This input is designed to accept HDCP (High-Bandwidth
Digital Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant consumer electronic
devices (such as a set-top box or DVD player with HDMI
the side of your television
NOTE: Supported Audio format: Linear PCM, Dolby
Digital (AC-3), sampling rate 32/44.1/48 kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI
terminal.
HDMI cable
For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo (
).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50 Hz,
you will need a Category 2 cable. Conventional HDMI/
DVI cable may not work properly with this model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
AV amplifier that supports ARC
the back and side of your television
HDMI cable
HDMI device
To view the HDMI device video, press o to select
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
Download from Www.Somanuals.co9m. All Manuals Search And Download.
CONNECTING YOUR TV
Connecting an HDMI CEC Control compatible device
You can control the basic functions of connected audio/video devices using the television’s remote
control if you connect an HDMI CEC compatible AV amplifier or playback device. For an explanation
the side of your television
AV amplifier
Playback device
Playback device
For the setup shown above, you will need three HDMI
cables.
Before controlling the device(s):
• After completing the above connections, set the HDMI
NOTE:
• The connected devices must also be set. For details,
see the operation manual for each device.
• If several devices are connected, the HDMI CEC Control
feature may not operate properly.
• The HDMI CEC Control feature uses CEC technology as
regulated by the HDMI standard.
• For proper operation, it is recommended that you use
HDMI cables with the HDMI Logo (
).
• This feature is limited to models incorporating Toshiba’s
HDMI CEC Control. However, Toshiba is not liable for
those operations. Refer to individual instruction manuals
for compatibility information.
• This function is available when one PC and one AV
amplifier are connected separately. However, it may not
operate properly if the PC is connected via the AV
amplifier.
Download from Www.Somanuals.c1om0. All Manuals Search And Download.
CONNECTING YOUR TV
Connecting a computer
To connect a PC to the RGB/PC
terminal
With either an HDMI or an RGB/PC connection,
you can watch your computer’s display on the
television.
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable.
the back of your television
To connect a PC to the HDMI
terminal
Computer
When connecting a PC to the HDMI terminal on the
television, use an HDMI cable (type A connector).
Mini D-sub
15 pin connector
the side of your television
RGB PC cable
(not supplied)
Computer
Conversion
adaptor if required
(not supplied)
HDMI cable
To use a PC, set the monitor output resolution on the PC
before connecting it to the television. For acceptable PC
If connecting a PC with DVI terminal, use an HDMI-to-DVI
adaptor cable.
To display the optimum picture, use the PC setting feature
the side of your television
NOTE:
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a
compatible mini D-sub15-pin terminal.
Computer
• Depending on the DVD’s title and the specifications of
the PC on which you are playing the DVD-Video, some
scenes may be skipped or you may not be able to pause
during multi-angle scenes.
• A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to scaling of
the picture by the set, it is not a malfunction.
HDMI-to-DVI
adaptor cable
• When PC input mode is selected, some of the
television’s features will be unavailable e.g. Colour
System in the Options menu.
• Some PC models may output unique signals that the
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC
signal, the PC signal may not be detected correctly.
• If connecting a certain PC model with a unique PC
signal, the PC signal may not be detected correctly.
Download from Www.Somanuals.c1om1. All Manuals Search And Download.
CONNECTING YOUR TV
Connecting a home network
To connect the TV to a home network
with an internet connection - Wireless
The LAN port allows your Toshiba TV to
connect to your home network. You can use this
revolutionary home entertainment networking
system to access photo, video and audio files
that are stored on a media server and play/
display them on your TV.
Access point (AP)
Wireless LAN router
NOTE:
• If you connect to a shared network outside your home, it
is advisable to use a router. Always use network media
products in private network environments. Connect this
TV to the same router as other network media products
(server).
Modem
• If you use a hub or switch to connect the TV to your
home network, you may not be able to use the automatic
setup and will have to manually set up the network
address. See page 42.
Computer
• If you use a router with built-in DHCP functionality, use
the automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover
LAN cable.
NOTE:
• If this device is going to be operated in the frequency
range of 5.15 GHz to 5.35 GHz, it is restricted to indoor
use.
• Please consult your PC manufacturer about details of
PC settings.
• Wireless appliances may interfere with Intel® Wireless
Display.
• If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to
2.4835 GHz in France, it is restricted to indoor use.
To connect the TV to a home network
- Wired
• A general authorization is required for using this device
outdoors or in public places in Italy.
• This device is NOT ALLOWED to be used in the
geographical area within a radius of 20 km from the
centre of Ny-Alesund in Norway.
the back of your television
• Make the wireless LAN appropriate security setting at
the time of wireless LAN use to prevent the illegal use,
spoofing and interception of communications.
• Don't connect wireless LAN to an outside network
directly.
Router with Hub
Modem (if available)
Apply the wireless LAN access point with router function
or broadband router. Make the router appropriate
security setting to prevent the illegal use.
Refer to the manual of router for a security setting.
[1]
[2]
Server PC
[2][3]
To connect the TV to the PC with
Intel® Wireless Display
Cable or Phone jack
[2]
®
PC with Intel
Wireless Display
Intel® WiDi
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
Warning: This TV complies with the EMC directive only
when you use a shielded Cat5 ethernet cable.
Download from Www.Somanuals.c1om2. All Manuals Search And Download.
CONNECTING YOUR TV
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the
television.
While all the necessary adjustments and controls for the television are made using the remote
control, the buttons on the television may be used for some functions.
ILLUSTRATION SHOWS 32L.
DVB COMMON INTERFACE
The Common Interface is for a
Conditional Access Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM
may be automatically executed. At this
time, your Recording/Reminder
programming will be cancelled.
USB ports
Media Player/USB HDD
connection port
Remote sensor
Power LED
Control panel
On = Green
Standby = Red
Switching on
Using the TV controls and
connections
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press 1on the remote
control; it may take a few moments. The GREEN LED will
be lit.
• To turn on or off the TV, press !.
• To alter the volume, press + or –.
+ and – buttons operate as volume up/down as default.
To put the television into Standby, press 1 on the remote
control. To view the television, press 1 again. The picture
may take a few seconds to appear.
• Press p / o repeatedly to switch the function of 2 +/
– button as below.
Volume→Channel→Input→Volume
The Media Player feature provides access to photo, movie
and music files stored on a USB storage device that is
connected via the USB 1 or USB 2 port or on a network
device.
For energy saving:
We recommend that you use the television with the
factory settings. The factory settings are for energy
saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television
is not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy
use.
Please always refer to the owner’s manual of the
equipment to be connected for full details.
NOTE:
• The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other
connected equipment.
Energy efficiency cuts energy consumption and can
save money.
• Interactive video games that involve shooting a “gun” at
an on-screen target may not work with this TV.
NOTE: Putting the television into Standby will reduce
energy consumption, but will still draw some power.
Download from Www.Somanuals.c1om3. All Manuals Search And Download.
CONNECTING YOUR TV
Press B / b
Press B / b and OK or c
Recording Setup
Media Player Setup
MHL Setup
Using the menu system
on the remote control to display the menu.
Press
The menu appears as a list of seven topics. As each icon
is selected by pressing B / b on the remote control, its
respective options will appear on the right.
Options
NOTE: The same menu is displayed in DTV (Digital TV)
and ATV (Analogue TV) modes; however, where some
items are not available in a mode, they will appear greyed
out.
HDMI CEC Control Setup
Hybrid TV Standard
Teletext
Panel Lock
Press B / b and OK or c
AV Connection
Picture Mode
Power Management
Blue Screen
Reset
Picture
Backlight
HDMI Information Display
Press B / b and OK or c
Menu Language
Country
Contrast
Press B / b
Brightness
Colour
Installation
Tint
Location
Sharpness
Channel Tuning
DTV Settings
Advanced Picture Settings
Expert Picture Settings
Display Settings
Press B / b and OK or c
Balance
Quick Setup
Reset TV
Press B / b
Press B / b
Press B / b and OK or c
Network Setup
Bass
Sound
Network Device Setup
Smart Apps Setup
Press B / b and OK or c
On Timer
Network
Treble
Advanced Sound Settings
Stable Sound
Dynamic Range Control
Dual
Press B / b
Sleep Timer
Timers
Press B / b
Press B / b and OK or c
Software Licences
Software Upgrade
System Information
Store Demo
Audio Level Offset
TV Speakers
Headphone Level
Audio Description
Digital Audio Output
Get Help
Download from Www.Somanuals.c1om4. All Manuals Search And Download.
SETTING UP YOUR TV
Startup Application
d
Press BbC c to highlight Next and press OK.
The Location screen will appear.
Before switching on the TV make sure that your
aerial is connected and any decoder / media
recorder, if applicable is connected and in
Standby.
Quick Setup
Country
Location
1/2
Location
Network
Smart TV
To set up the TV for use within a
showroom, please select [Store] from the
menu below.
Quick Setup
[Home] is recommended for normal use.
* Power requirement for Store mode will be
higher due to automatic store demos.
Channel Tuning
a
b
Press the 1 button, Toshiba logo will appear. After
that, The Menu Language screen will appear.
This screen will appear the first time that the
television is switched on and each time Reset TV
is executed.
Home
Store
Previous
Next
e
f
g
Press B / b to select Home or Store. For normal
home use, select Home.
Press BbC c to select the menu language and
press OK. The Country/Language screen will
appear.
Press BbC c to highlight Next and press OK.
The Network Type screen will appear.
Menu Language
Please press [OK] to proceed.
Press Bto highlight Network Type and then press
c and B / b to select Wireless. Press OK.
English
Italiano
Dansk
Français
Português
Norska
Deutsch
Nederlands
Suomi
Español
Svenska
Polski
Quick Setup
Country
Network Type
1/5
Location
Network
Smart TV
Türkçe
Magyar
Slovensky
Български
Укpaϊнcькa
Český
Network setup allows you to access content
on your home network and the Internet.
Enjoy online video, music, games, news
and more provided by Smart TV portal* and
keep your TV up to date with new software.
Pусский
Ελληνικα
Română
Hrvatski
Srpski
* Availability is dependant on country
selection
Channel Tuning
Slovenščina
Please select from Wired or Wireless
Network Type
Previous
Wired
Skip
Wired
c
Press B / bto highlight Country and press cand
B / b to select your country.
Wireless
Next
Quick Setup
Country
Country/Language
1/3
• When you select Wired (LAN cable connection),
skip to step 14.
Welcome
Thank you for choosing Toshiba TV
Location
Network
Smart TV
h
i
Press BbC c to highlight Next and press OK.
The Wireless Setup screen will appear.
Country
Germany
Press B to highlight Wireless Setup and then
press c and B / b to select the Wireless Setup
type. Press OK.
German
Greek
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
German
Turkish
German
English
Channel Tuning
Greenlandic
Hungarian
Icelandic
Irish
Quick Setup
Country
Wireless Setup
2/5
Previous
Next
Please select a wireless network setup
option. Assisted Setup is recommended.
Italian
Kurdish
Location
Network
Smart TV
Wireless Setup
Easy Setup
Easy Setup
NOTE:
Assisted Setup
Manual Setup
• The following display menus will differ slightly
according to the country you selected.
Channel Tuning
• If there is not a country that you want to select in
the list, select Others.
Previous
Next
Download from Www.Somanuals.c1om5. All Manuals Search And Download.
SETTING UP YOUR TV
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
There are 3 methods for Wireless Setup:
• Easy Setup (WPS) - If the AP supports WPS,
this method can be used. WPS is an industry
standard designed to make connection of
wireless LAN equipment and security setup
easy. WPS will automatically configure all
wireless settings.
• There is only one key ID to set for WEP
encryption.
Press B / b to highlight Done and press OK.
NOTE:
• If Network Name is not displayed, see Manual
Setup below to set Network Name before Done
is selected.
NOTE: WEP encryption may not be able to
configured by easy setup.
• Assisted Setup - follow step 11.
Input the Security Key only.
• If BACK is pressed before Done is selected,
settings are not saved.
• Manual Setup, skip to step 12.
Input the all settings.
When the message “Wireless configuration is
complete.” appears on screen, press OK.
The screen will skip to step 13.
NOTE: EXIT is available during settings.
j
In step 9, when you select Easy Setup;
l
In step 9, when you select Manual Setup;
Press BbC c to highlight Next and press OK.
The Easy Setup screen will appear.
Press c and B / b to select PBC (Push Button
Configuration) or PIN (Personal Identification
Number) and press OK.
Press BbC c to highlight Next and press OK.
The Manual Setup screen will appear. Press B /
b to select Network Name and press OK.
The Software Keyboard window will appear (page
44).
Press b to highlight Start Scan and press OK.
Input the Network Name by using the Software
Keyboard. To save your setting, press the GREEN
button.
PBC - Following the on-screen instructions, push
the appropriate button on your AP. When a window
reporting that the setup is complete appears, press
OK.
Press B / b to select Authentication and then
press c and B / b to select Open System,
Shared Key, WPA-PSK or WPA2-PSK. Press
OK.
PIN - When the PIN code window appears, enter
the displayed PIN into your AP, and then press OK
to continue the PIN Setup. When a message
displays to report that the setup is complete, press
OK.
Press B / b to select Encryption, and then press
c and B / b to select None, WEP, TKIP or AES.
Press OK.
NOTE:
To cancel searching for the AP:
• Certain encryption types are only compatible
with specific authentication types.
Press BACK while searching for the AP. A message will
appear, and then press C / c to select Yes and press OK.
- When Authentication is Open System, only
WEP or None is compatible.
k
In step 9, when you select Assisted Setup;
- When Authentication is Shared Key, only WEP
is compatible.
Press BbC c to highlight Next and press OK.
The Assisted Setup screen will appear.
Press B / b to select the desired AP and press
OK.
- When Authentication is WPA-PSK or WPA2-
PSK, only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be
made until the incompatibility is resolved.
NOTE: Check the MAC address on the label of the
AP or in the manual, and select your AP.
• There is only one key ID to set for WEP
encryption.
Press B / b to select Security Key and press OK.
The Software Keyboard window will appear (page
44).
Input the Security Key by using the Software
Keyboard. To save your setting, press the GREEN
button.
Press B / bto select Security Key and press OK.
Input the Security Key by using the Software
To save your setting, press the GREEN button.
This item is greyed out when Encryption is None.
NOTE:
• The Security Key must adhere to these
conditions:
Download from Www.Somanuals.c1om6. All Manuals Search And Download.
SETTING UP YOUR TV
When Encryption is WEP, Key ID setting is
available. Press B / b to select Key ID and press
c and B / b to select 1 (default), 2, 3 or 4.
o
Press OK, and TV Power On Control screen will
appear. Select Disabled or Enabled and highlight
Next.
Press B / b to highlight Done and press OK.
When the message “Wireless configuration is
complete.” appears on screen, press OK.
Quick Setup
Country
TV Power On Control
1/2
Location
Network
Smart TV
We recommend you Enable TV Power On
Control for quick access to Toshiba
services. Once enabled you will be able to
view Internet and Menu systems faster.
This mode will result in your TV using
higher power consumption than when
Disabled.
NOTE: Settings are not saved if BACK is pressed
before Done is selected.
m
The Advanced Network Setup screen will
appear.
TV Power On Control
Disabled
Channel Tuning
Disabled
Enabled
When the DHCP function of the router connected
with this TV is On, you can set Auto Setup to On
or Off. (This should usually be set to On.)
When the DHCP function of the router is Off, set
Auto Setup to Off, and set the IP Address DNS
address(es) manually.
Previous
Next
p
q
Press OK, and Companion Device screen will
appear. Select On or Off from Enable Control and
Media Renderer and highlight Next.
Quick Setup
Country
Advanced Network Setup
3/5
Press OK. If the Ant/Cable/Satellite screen
appears, press B / b to select Antenna, Cable or
Satellite, and then press OK to check ( ).
Auto Setup
IP Address
On
Location
Network
Smart TV
.
.
.
xxx xxx xx
x
Subnet Mask
xxx . xxx . xx . x
xxx . xxx . xx . x
On
Default Gateway
Auto Setup
Antenna
Cable
Primary DNS Address
Secondary DNS Address
.
.
.
.
xxx xxx xx
x
x
Satellite
Channel Tuning
.
.
xxx xxx xx
Previous
Next
If DVB-C is not supported in your area, Cable will
Previous
Next
not be displayed.
• When you select Antenna or Cable, follow step
18 to 21.
You can view the fixed MAC address for the TV, if
one is installed.
• When you select Satellite, skip to step 22.
Press B / b to highlight Next.
• When you select Antenna (or Cable) and
Satellite, the Satellite Settings startup screen
will appear automatically after completing the
Antenna (or Cable) scan and pressing OK.
n
Press OK, and Network Connection Test will start.
A message will appear to indicate if the connection
was successful or if could not be completed.
r
Press BbC c to highlight Next and press OK.
The Auto Tuning start up screen will appear with
the option to select between DTV and ATV, DTV
or ATV if available. Press c and B / b to select
the appropriate mode and press OK.
Network Connection Test
5/5
Network connection was completed successfully.
OK
NOTE: The result of Network Connection Test
does not always guarantee the connection.
To cancel the Network Connection Test:
Press BACK while testing.
When the network can be accessed, Software
Upgrade starts automatically. When Software
Upgrade is completed, proceed to the next step.
Download from Www.Somanuals.c1om7. All Manuals Search And Download.
SETTING UP YOUR TV
NOTE:
s
Press b to highlight Start Scan, and press OK.
• None is being used when the satellite dish will
control only one universal Low Noise Block
(LNB) with a single satellite (e.g. Astra 19.2°). As
a rule, most households use just one satellite.
The television will start to search for available DTV
and/or ATV channels. The progress bar will
indicate the scan status.
• ToneBurst sends a 22 kHz signal. ToneBurst is
only necessary for simple LNBs (not universal
LNBs). The 22 kHz signal is needed for
switching LNBs with multifeed signals as well as
for changing between low- and high-band.
You must allow the television to complete the
search.
Auto Tuning - Antenna
Progress
4 %
Found
0
DTV Tune
• DiSEqC 2way automatically switches between
two LNBs, which receive different satellites at the
same time (e.g. Astra 19.2° and Hotbird 13°).
ATV Tune Waiting...
Channel: 23
0
• DiSEqC 4way automatically switches between
up to four LNBs / satellites.
When the search is complete, the television will
automatically select channel one.
• Single cable is selection and control of plural
Satellite antennas through the combined single
antenna cable.
The Auto Tuning screen will display the total
number of services found.
The setting LNB Power enables you to switch on
or off the LNB's power supply by means of the TV.
When your satellite dish consists of only one LNB,
LNB Power should generally be activated (On).
When using more than two LNBs, it is
recommendable to use external power supply for
these.
T
u
Press C / c to view the DTV (digital channel) or
ATV (analogue channel) lists.
Press B / b to move through the list to select a
channel, and then press OK to view.
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the
signal may be weak, so the station order can be
changed using ATV Manual Tuning.
Satellite Settings
Switch Type
None
On
LNB Power
On
Off
REMEMBER: Press TV at any time to select
between ATV and DTV modes.
No.
1
Satellite
LNB
1
Dish
1
Astra 19.2E
2
NOTE: The time will be set automatically by
transmission but can be advanced or decreased
by using Local Time Setting in the DTV Settings
screen.
3
4
v
Select Next and press OK. The Satellite Settings
screen will appear. From this window, you can add
the satellites that you wish to tune and configure
detailed settings for each one individually.
Done
It is possible to select up to four satellites. Please
note that the number of available LNBs and the
adjustment of your satellite dish determines the
number of satellites found. For example, it is not
possible to receive more than one satellite if your
dish is directed to a single satellite. For further
information on satellite signal technology, please
contact your local dealer.
Select Switch Type and choose the correct switch
configuration for your satellite dish from the
settings None, ToneBurst, DiSEqC 2way,
DiSEqC 4way or Single cable.
Satellite Settings
Switch Type
None
On
None
LNB Power
ToneBurst
DiSEqC 2way
DiSEqC 4way
Single Cable
No.
1
Satellite
LNB
1
Dish
1
Astra 19.2E
2
3
4
Done
Download from Www.Somanuals.c1om8. All Manuals Search And Download.
SETTING UP YOUR TV
Satellite Settings
w
If your satellite dish is moveable, the following
Positioning screen will appear.
Switch Type
LNB Power
None
On
No.
1
Satellite
Astra 19.2E
LNB
1
Positioning
Dish
1
Transponder
Go to 0
1/120 (10729 MHz V (R))
2
3
Go to Stored Position
Step Size
4
1
Positioning
W
E
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Satellite : Astra 19.2E
Signal Level
Upper LOF : 10600
30%
Done
Store Position
Once you have selected a satellite, you can
change further settings under Dish and LNB.
Press OK and C / c to select Dish or LNB and
press OK.
Press B / b to highlight Positioning, and then
press C / c to find the dish position with the
strongest signal level.
Press B / b to highlight Store Position and press
OK to store the dish position. Repeat steps 22 and
23 for the next satellite as necessary.
Under Dish you choose the dish type that will be
used (fixed or moveable dish). The majority of
households have a fixed satellite dish.
If your satellite dish is not moveable, the
Positioning screen will not appear.
LNB allows you to determine the lower and higher
Local Oscillator Frequency (LOF). Usually, the
factory settings do not need to be changed. You
can find the parameters of the lower and higher
LOF on the specification sheet of your LNB.
Adjust the dish position manually for the maximum
Signal Level strength. The signal level strength is
displayed from 0 % to 100 %. A high signal level
can be achieved by adjusting the satellite dish the
best way possible.
Satellite Settings
Switch Type
None
On
LNB Power
No.
1
Satellite
LNB
1
Signal Level
Dish
1
30%
Astra 19.2E
2
Press B / b to highlight Done and press OK.
3
4
If you select Single Cable in step 22, the Single
Cable Settings screen will appear. You can set
the appropriate value for each item and highlight
Done.
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600
Done
Single Cable Settings
User Slot Number
User Slot Frequency
Password PIN
0
Press B / b to highlight Done and press OK.
1284
None
Verify Slot Frequency
Done
Download from Www.Somanuals.c1om9. All Manuals Search And Download.
SETTING UP YOUR TV
x
If the reception testing completes successfully, the
Auto Tuning startup screen will display.
f
When Ant/Cable/Satellite is set to Cable, the
following setting options will be provided in the
Auto Tuning screen.
Auto Tuning - Satellite
Press B / b to select an item and press c and B /
b to select your desired option.
Scan Type
Quick Scan
Free to Air
Search Option
Start Scan
Auto Tuning - Cable
Tuning Mode
DTV and ATV
You can select Search Option from Free to Air or
All.
Start Scan
DTV
When choosing the search option All, all channels
(including encrypted ones) of the satellite will be
searched for. If you wish to only search for
unencrypted (free) channels, please select Free to
Air. In this case, the channel scan will be
completed faster.
Operator Selection
Scan Type
Others
Quick Scan
Auto
Start Frequency
End Frequency
Modulation
Auto
Auto
Symbol Rate
Network ID
Auto
Auto
y
z
Press b to highlight Start Scan, and press OK.
With the exception of DTV Scan Type and DTV
Modulation items, all of the following items will have 2
operating modes. The first is Auto where the values for
each item are preset by the system. The second is an
Input mode where you will be able to enter a single value
in place of the pre-set value. If no channel is currently
tuned and the Input state is chosen, a system default
value will be shown. However, if a channel is currently
tuned when the item is accessed, the value of the current
channel will be displayed.
The television will start to search for available
DVB-S channels. The progress bar will indicate
the scan status.
When the search is complete, the Auto Tuning
results screen will display the total number of
services found.
Use B / b to move through the list to select a
channel, and then press OK to view.
Operator Selection:
You can choose the Cable operator depending on the
Country you set.
PLEASE NOTE
The Quick Setup menu can also be accessed at
any time from the Installation menu.
DTV Scan Type:
This item determines whether a Quick Scan or a Full
Scan will be executed.
The Quick Scan is a simplified version of the Full Scan
that is designed to complete in less time.
Ant/Cable/Satellite (if available)
From this menu, you can set the RF input configuration.
DTV Start Frequency:
a
b
c
d
e
Press
icon.
and B / b to highlight Installation
This sets the frequency from which the scan will begin.
DTV End Frequency:
Press c and B / b to select Channel Tuning and
press OK.
This sets the frequency at which the scan will end.
DTV Modulation:
Press B / b to select Ant/Cable/Satellite and
press OK.
You can choose from five QAM modulation settings.
DTV Symbol Rate:
Press B / b to select Antenna, Cable or
Satellite.
This is the baud rate (KS/s) of the scan.
DTV Network ID:
Press B / b to highlight Next and press OK.
This is the Network ID to be utilized for the scan. This item
is greyed out when DTV Scan Type is set to “Full Scan”.
NOTE: When you attempt to change the Ant/
Cable/Satellite setting, a warning message will
appear followed by PIN entry (if PIN has been set)
and a prompt for Auto Tuning.
Download from Www.Somanuals.c2om0. All Manuals Search And Download.
SETTING UP YOUR TV
To edit the satellite settings:
Satellite Settings
a
In the Satellite Settings menu, press B to
highlight Switch Type.
From the System Setup menu, you can add the satellites
that you wish to tune and configure detailed settings for
each one individually.
b
Press C / c to select None, ToneBurst, DiSEqC
2way, DiSEqC 4way or Single Cable as your
satellite switch type.
To add a satellite:
a
b
c
Press
icon.
and B / b to highlight Installation
c
Press b to highlight LNB Power and press C / c
to select On or Off.
Press cand B / b to select Channel Tuning and
press OK.
To add a transponder:
Press b to select Satellite Settings and press
OK.
a
In the Satellite Settings menu, press B / b to
highlight the line you want to edit and press OK.
Satellite Settings
1
Astra 19.2E
1
1
Switch Type
None
On
LNB Power
b
Press the GREEN button. The Transponder
Settings screen will appear.
No.
1
Satellite
LNB
1
Dish
1
Astra 19.2E
2
3
Transponder Settings
4
Frequency
Polarisation
Symbol Rate
S/S2
1
2
3
4
5
6
7
8
10743
10773
10788
10817
10832
10847
10861
10876
H
H
V
V
H
V
H
V
22000
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
S
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600
Done
d
e
Press b to highlight a new line to add an another
satellite and press OK.
c
Press B to highlight a new line.
Press buntil the required satellite is displayed and
press OK.
Transponder Settings
Frequency
Polarisation
Symbol Rate
S/S2
76
77
78
79
80
81
82
83
12640
12662
12669
12692
12699
12721
12728
H
H
V
H
V
H
V
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
To delete a satellite:
a
b
c
In the Satellite Settings menu, press B / b to
select the satellite you want to delete.
Press the RED button. A confirmation window will
appear.
d
e
Press OK.
Press C / c to select Yes and press OK.
83
0
H
0
S
NOTE: It is not possible to delete position No.1.
Edit each parameter as required and press OK
.
83
1231
H
0
S2
Download from Www.Somanuals.c2om1. All Manuals Search And Download.
SETTING UP YOUR TV
To delete a transponder:
c
Press B / b to select Lower LOF or Upper LOF
and use the number buttons (0-9) to input the
appropriate frequencies.
a
In the Transponder Settings menu, press B / b
to highlight the line you want to delete.
b
Press the RED button.
Auto Tuning
NOTE: As new services are broadcast, it will be necessary
to re-tune the television in order to view them.
To edit the Transponder Settings:
a
In the Transponder Settings menu, press B / b
to highlight the line you want to edit and press OK.
Auto Tuning will completely re-tune the television and
can be used to update the channel list. It is
recommended that Auto Tuning is run periodically to
ensure that all new services are added. All current
channels and settings, i.e. locked channels, will be lost.
b
Press C / c to select Frequency, Polarisation,
Symbol Rate or S/S2, and set the item using the
number buttons and B / b if necessary.
a
Press
icon.
and B / b to highlight Installation
c
d
e
Press OK to save your settings.
b
c
Press c and B / b to select Channel Tuning and
press OK.
Repeat steps 1 through 3 for other lines.
Press the BLUE button to finish editing and return
to Satellite Settings.
Press B / b to select Auto Tuning and press OK.
< Channel Tuning
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
Press the GREEN button to cancel any edits that
were made.
ATV Manual Tuning
DTV Manual Tuning
Press the YELLOW button to reset all transponder
settings to their initial default settings.
A message will appear, and then press C / c to
select Yes and press OK.
To select the Dish Type:
a
In the Satellite Settings menu, press B / b to
select the required satellite line and press OK.
d
Press c and B / b to select DTV, DTV and ATV,
or ATV, if available, then highlight Start Scan and
press OK to continue with the Auto Tuning.
b
Press C / c to highlight Dish and press the
GREEN button.
Auto Tuning - Antenna
Tuning Mode
DTV
DTV
Dish Settings
Dish : 1
DTV and ATV
ATV
Dish Type
Fixed
Start Scan
c
Press c and B / b to select Dish Type. You can
select Movable or Fixed as the Dish Type.
NOTE: If you have selected Others for the
Country field in the Installation menu, and
selected a tuning mode other than DTV, choose
the optimum ATV broadcasting system (B/G, I, D/
K or L).
To select the LNB Settings:
a
In the Satellite Settings menu, press B / b to
select the required satellite line and press OK.
The television will start to search for all available
DTV and/or ATV services.
You must allow the television to complete the
search.
b
Press C / c to highlight LNB and press the
GREEN button.
When the search is complete, the Auto Tuning
screen will display the services found.
LNB Settings
LNB : 1
Lower LOF
Upper LOF
9750
10600
e
Press B / b to move through the list to select a
channel and press OK to view.
Download from Www.Somanuals.c2om2. All Manuals Search And Download.
SETTING UP YOUR TV
ATV Manual Tuning
a
b
In the Channel Tuning menu, press b to select
ATV Manual Tuning and press OK.
< Channel Tuning
Tuning
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
The television can be tuned-in manually using ATV
Manual Tuning. For example, you might use the feature
if the television cannot be connected to a media recorder/
decoder with a SCART lead or when you want to tune-in a
station on another System.
ATV Manual Tuning
DTV Manual Tuning
Use C / cto move across the screen and select any of the
ATV Manual Tuning options. Then use B / bto adjust the
settings.
Press B / b to select the desired position. We
suggest Pos. 0 for a media recorder.
ATV Manual Tuning
ATV Manual Tuning
System
Pos.
Channel
Station
0
1
2
3
4
5
6
7
C2
S10
C7
1
I
A
C
2
0
V
C
R
S40
C22
C25
C28
C30
1 2 3 4 5 6 7 8
9
1
Position
The number to be pressed on the remote control to
tune the channel.
Different Channel numbers may be displayed.
2
3
System
Specific to certain areas.
Colour System
c
d
Press OK to select. If the channel chosen for the
media recorder is set to skip, Skip should be
removed before storing.
Factory set to Auto, should only be changed if
problems are experienced, i.e. NTSC input from
external source.
4
Skip
Press c to select System and press B / b to
change if required.
Set Skip to On (8) or Off (() for the selected
channel. See page 24.
5
6
Signal Class
The channel classification.
ATV Manual Tuning
System
Channel
1
I
A
C
2
0
The channel number on which a station is being
broadcast.
7
8
Search
e
f
Then press c to select Search.
Search up and down for a signal.
Manual Fine Tuning
Only used if interference/weak signal is experienced.
See page 84.
Press B / b to begin the search. The search
symbol will flash.
9
Station
ATV Manual Tuning
Search
Station identification. Use the Bb and C c buttons to
enter up to seven characters.
1
I
A
C
2
0
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.
Download from Www.Somanuals.c2om3. All Manuals Search And Download.
SETTING UP YOUR TV
g
h
Each signal will show on the television. If it is not
your media recorder, press B / b again to restart
the search.
Skip
To prevent certain channels from being viewed, positions
can be skipped.
When your media recorder signal is found, press c
to move along to Station. Use BbC c to put in
the required characters, e.g. VCR.
a
b
Select ATV Manual Tuning from the Channel
Tuning menu.
Press B / b to highlight the position to be skipped
ATV Manual Tuning
Station
and press OK.
1
I
A
C
2
0
V
C
R
ATV Manual Tuning
Pos.
Channel
Station
0
1
2
3
4
5
6
7
C2
i
j
k
Press OK to save.
S10
C7
S40
C22
C25
C28
C30
Repeat for each position you want to tune.
Press EXIT when you have finished.
PLEASE NOTE
c
d
Press c to select Skip.
This television has direct channel entry if the
channel numbers are known.
Press B / b to turn Skip on and press OK.
Select the ATV Manual Tuning screen in Step
3. Enter the Position number, the System, then
C for standard (terrestrial) channels or S for
cable channels and the Channel number. Press
OK to save.
8 on the screen indicates a skipped position.
ATV Manual Tuning
Skip: On
1
I
A
C
2
0
e
Press BACK and repeat from Step 2 or press
EXIT.
Each position has to be individually selected. To
turn Skip off, repeat the procedure for each
position.
Skipped positions cannot be selected by PU and
Pu or by the controls on the television but can still
be accessed by the number buttons on the remote
control.
Download from Www.Somanuals.c2om4. All Manuals Search And Download.
SETTING UP YOUR TV
DTV Manual Tuning
Sorting positions
Channels may be moved and saved to the position of your
choice.
NOTE: This feature varies depending on the Ant/Cable/
Satellite setting.
a
b
Select ATV Manual Tuning from the Channel
Tuning menu.
Manual Tuning
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel is
known.
With the list of channels showing, press B / b to
highlight the position to be moved and press c.
Channels
Line No.
Antenna TV
a
Select DTV Manual Tuning from the Channel
Tuning menu and press OK.
1/10
Pos.
1
Name
ABC ONE
ABC TWO
ABC THREE
CABC Channel
ABC NEWS 24
ABCi
DTV Manual Tuning - Antenna
2
WEAK
AVERAGE
STRONG
7
Signal Strength
30
40
51
822
823
Signal Quality
GOOD
Channel
67
842.0 MHz
8 MHz
AA
AC
Frequency
Bandwidth
Start Scan
c
d
Press B / b to move through the list to your
preferred position. As you do so, the other
channels will move to make room.
b
c
Enter the multiplex number using the number
buttons or use C / c to adjust the number up or
down.
Press C to save your move.
Repeat as necessary and press EXIT.
Highlight Start Scan and press OK. The television
will automatically search for that multiplex.
DTV Manual Tuning - Antenna
0 New Channels - Total 6
New
Pos.
Name
Type
1
2
ABC ONE
ABC TWO
ABC THREE
ABC NEWS 24
ABCi
7
40
51
When the multiplex is found, any channels that are
not currently in the channel list will be added and
the channel information at the top of the screen will
be updated.
d
Repeat as necessary. Press EXIT to finish.
Download from Www.Somanuals.c2om5. All Manuals Search And Download.
SETTING UP YOUR TV
DTV Settings
Manual Tuning for DVB-C
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Channels (Antenna/Cable)
Frequency: Input a specific frequency to be scanned
The channel order may be changed to suit your personal
preference.
Modulation: Choose from one of five QAM modulation
options
a
b
Select DTV Settings from the Installation menu
and press OK.
Symbol Rate: Input a specific baud rate (KS/s) to be used
for the manual scan
Highlight Start Scan and press OK.
Press b to select Channels and press OK.
< DTV Settings
Manual Tuning for DVB-S
Channels
When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
Subtitle and Audio
Parental PIN Setup
Parental Control
Local Time Setting
Standby Channel Update
Common Interface
DTV Manual Tuning - Satellite
WEAK
AVERAGE
STRONG
Signal Strength
Signal Quality
POOR
Satellite
ASTRA 28.2°E
1/83
c
For your convenience, you can jump to specific
places in the list by one of two methods.
Transponder
Frequency
10714 MHz
22000 KS/s
H
Symbol Rate
Polarisation
Search Option
Channels
Line No.
Antenna TV
Free to Air
1/10
Pos.
Name
Start Scan
1
ABC ONE
ABC TWO
ABC THREE
CABC Channel
ABC NEWS 24
ABCi
2
7
Press B / b to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search
Option) and press C / c to select the required option.
30
40
51
822
823
AA
Highlight Start Scan and press OK.
AC
Line Number Jump — Use the number
buttons (0-9) to input the line number you want to
select and press OK.
It is also possible to change the Position number of
a particular channel.
Renumber — Press the RED button to
renumber the highlighted channel. Edit the
channel number using the number buttons and
press OK. If the position number you input already
exists, a confirmation window will appear.
Pos.
Name
ABC ONE
Download from Www.Somanuals.c2om6. All Manuals Search And Download.
SETTING UP YOUR TV
Move — Press the GREEN button to activate the
Move feature. Press B / b to select the channel
you wish to move and press OK to check.
If you wish to move multiple channels at once,
select another channel and check in the same
way. Repeat as necessary.
c
For your convenience, you can edit and sort your
channel list.
Line Number Jump — Press the number
buttons (0-9) to input the line number you want to
select and press OK.
Once all desired channels have been checked,
press B / b to place the focus at the position to
which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.
Satellite Jump — Press Z / z to jump to the
next channel on a different Satellite.
Renumber — Same as Antenna/Cable
channels. See page 26.
Move — Same as Antenna/Cable channels. See
Channels
Line No.
Antenna TV
1/10
Position No. Sort — Press the YELLOW
button. A confirmation window will appear. Press
C / c to select Yes and press OK.
Pos.
1
Name
ABC ONE
ABC TWO
ABC THREE
CABC Channel
ABC NEWS 24
ABCi
2
7
30
40
51
822
823
Standby Channel Update
AA
If the Standby Channel Update is set to On, when the TV
is in Standby, Digital Tuning is automatically executed.
AC
a
b
Select DTV Settings from the Installation menu
and press OK.
Position No. Sort — Press the YELLOW
button. A confirmation window will appear. Press
C / c to select Yes and press OK.
Press b to select Standby Channel Update and
press c and B / b to select On.
Your existing channel order will be lost. Do you wish to
continue?
Yes
Location setting
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when
using the television for displaying in a shop, etc.
Channels (Satellite)
a
b
Select DTV Settings from the Installation menu
and press OK.
a
b
Select Location from the Installation menu.
Press C / c to select Home or Store.
Select Channels and press OK.
The satellite channel list will appear.
Analogue switch-off
Channels
Line No.
Satellite TV
This is a digital television which is integrated to allow the
use of both digital and analogue services. However,
during the lifetime of this set it is very likely that analogue
services will be switched off to allow for more new digital
services.
1/10
Pos.
1
Name
DDD
AB
Satellite
19.2°E
19.2°E
19.2°E
22.5°E
22.5°E
22.5°E
25.6°E
25.6°E
2
3
E
This ‘switch-off’ will happen in a number of phases, which
will be advertised in your area well in advance. It is
recommended that at each phase the television is re-
tuned to ensure that existing and new digital services can
be viewed without disruption.
801
802
803
822
823
BBC
BB
BA
AA
AC
Download from Www.Somanuals.c2om7. All Manuals Search And Download.
CONTROLS AND FEATURES
General controls
Selecting channels
To select a channel, use the numbered buttons on the
remote control.
Quick Menu
Channels can also be selected using PU and Pu.
Quick Menu helps you access some options quickly, such
as Picture Mode, Picture Size, More Information, Sleep
Timer etc.
To display on-screen information such as channel, input
mode or stereo/mono signal, press
cancel.
. Press again to
Press QUICK to open the Quick Menu and use B / b to
select the option.
The Time Display – analogue only
Quick Menu
The time display facility allows the current (text service)
time to be seen on the television screen.
Intel® WiDi
Picture Mode
Standard
Wide
Picture Size
Press D whilst watching a normal television
broadcast to see the time display from the broadcaster. It
will remain on screen for about 5 seconds.
More Information
Channel Options
Sleep Timer
HDMI CEC Device Control
Speakers
NOTE: This display may not be available in some cases.
TV Speakers
30
Headphone Level
Wireless Information
Recording Information
Stereo and Bilingual transmissions
For DTV programmes
NOTE: Quick Menu items are different depending on the
current mode.
For stereo or dual mono broadcasts, press s and use
C / c to select settings.
Quick menu item example
Mode Display
Stereo
Pressing c
Stereo S Left S Right
Mode
Quick menu item Description
When viewing a TV Intel® WiDi
See page 59.
See page 33.
See page 31.
See page 70.
See page 73.
See page 69.
See page 80.
Dual mono
Mono
Dual 1 S Dual 2 S Dual
programme or
pictures from the
external input
Picture Mode
–
–
Picture Size
Multichannel
More Information
Channel Options
Sleep Timer
Single Window
For multi-audio track broadcasts, press s repeatedly to
74).
HDMI CEC Device
Control
For ATV programmes
Speakers
See page 80.
See page 30.
See page 41.
See page 70.
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
channels are changed, disappearing after a few seconds.
If the broadcast is not in stereo, the word Mono will
appear.
Headphone Level
Wireless Information
Recording
Information
When using EPG
Genre Colour
See page 71.
Stereo… Press s to select Stereo or Mono.
EPG Update
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual
appears, press s to select Dual 1, Dual 2 or Mono.
USB Media Player
(Photo Single View,
Slide Show)
Picture
See page 33.
See page 29.
See page 63.
See page 63.
See page 63.
See page 63.
See page 69.
See page 80.
See page 30.
Sound
Interval Time
Repeat
Background Music
Play List
Sleep Timer
Speakers
Headphone Level
Download from Www.Somanuals.c2om8. All Manuals Search And Download.
CONTROLS AND FEATURES
Sound controls
Voice Enhancement
Voice Enhancement emphasises the frequency range of
the speaker’s voice, making it easier to catch what they
are saying.
Volume controls and sound mute
Volume
a
b
In the Advanced Sound Settings menu, press
B / b to select Voice Enhancement.
Press 2+ or 2– to adjust the volume.
Sound Mute
Press
once to turn the sound off and again to cancel.
Press c and B / b to select On or Off.
Dual
Dynamic Bass Boost
If a programme or film is being broadcast with a
soundtrack in more than one language, the Dual feature
allows selection between them.
Dynamic Bass Boost enhances the depth of the sound
on the TV speakers. The difference will only be noticeable
on sound with strong bass.
a
b
Press
and B / b to highlight Sound icon.
a
b
In the Advanced Sound Settings menu, press
B / b to select Dynamic Bass Boost.
Press cand B / bto select Dual and press cand
B / b to choose between Dual 1 or Dual 2.
Press c and B / b to select the desired bass
expansion level (Low, High or Off).
< Sound
Balance
0
0
0
Bass
Stable Sound®
Treble
Advanced Sound Settings
Stable Sound
Dynamic Range Control
Dual
Stable Sound reduces the volume level differences
between channels. It automatically remains on the same
volume level when you change channels.
On
Dual 1
Audio Level Offset
TV Speakers
On
a
b
In the Sound menu, press B / b to select Stable
Sound.
Headphone Level
Audio Description
Digital Audio Output
Press c and B / b to select On or Off.
Balance
Dynamic Range Control
a
In the Sound menu, press B / b to select
Balance and press C / cto emphasize left or right
speaker balance.
This feature allows control of audio compression for some
digital TV programmes (MPEG-1 and MPEG-2 audio
programmes are not supported).
a
b
In the Sound menu, press B / b to select
Dynamic Range Control.
Bass, Treble
a
b
In the Sound menu, press B / b to select Bass or
Press c and B / b to select On or Off.
Treble.
Press C / c to change the setting.
Download from Www.Somanuals.c2om9. All Manuals Search And Download.
CONTROLS AND FEATURES
Audio Level Offset
Headphone Settings
Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV
channel, or an external input. Using the Audio Level
Offset feature reduces these volume differences.
This setting is used to set the sound output when
headphones are connected.
Speaker
Link
Headphone
Speakers
No sound
a
b
c
d
Set the volume level usually used when watching
a DTV 5.1ch programme.
On
Off
Sound is output
(2 ± is available.)
Tune to a channel which is DTV 2ch, ATV or an
external input.
Sound is output
Sound is output
(Headphone level
menu is available.)
(2 ± is available.)
In the Sound menu, press B / b to select Audio
Level Offset and press OK.
a
b
In the Sound menu, press B / b to select
Headphone Level and press OK.
Press B / bto select an option, and then press C /
c to adjust the volume level.
Press B / b to select Speaker Link and press c
and B / b to select On or Off.
< Audio Level Offset
DTV 2ch
ATV
0
0
0
0
External Input
< Headphone Level
Speaker Link
On
30
On
Off
Headphone Level
NOTE:
• The available item changes depending on the current
input source. For example, while watching a DTV 2ch
programme, only DTV 2ch is available and the other two
items are greyed out in the menu. This allows you to
easily adjust according to each condition.
c
If you select Off, then highlight Headphone Level
and use C / c to adjust the headphone sound.
• When watching a DTV 5.1ch programme, this feature is
not available.
Audio Description
Audio Description is an additional narrative sound track for
visually impaired individuals to understand and enjoy the
story line more fully. The letters AD will be displayed in the
channel banner when programmes contain AD content.
TV Speakers On/Off
This feature allows you to turn the TV speakers off when
connecting the audio system.
a
b
In the Sound menu, press B / b to select Audio
Description and press OK.
a
In the Sound menu, press B / b to select TV
Speakers.
Press B / b to select Audio Description and
press c and B / b to select On.
b
Press c and B / b to select Off.
To turn on the built-in speakers:
The AD button on the remote control can also be
used to toggle the Audio Description feature
between On and Off.
Select On in step 2.
c
To adjust the level of the audio description sound
to the main sound, highlight Mixing Level and
press C / c.
< Audio Description
Audio Description
Mixing Level
On
80
80
Download from Www.Somanuals.c3om0. All Manuals Search And Download.
CONTROLS AND FEATURES
Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of
formats.
Use this setting when watching a
widescreen DVD, widescreen video tape or
a 16:9 broadcast (when available). Due to
WIDE
the range of widescreen formats (16:9, 14:9,
20:9 etc.) black bars may be visible on the
top and bottom of the screen.
Use this setting to view a true 4:3 broadcast.
4:3
SUPER LIVE
This setting will enlarge a 4:3 image
to fit the screen by stretching the
image horizontally and vertically,
holding better proportions at the
centre of the image. Some distortion
may occur.
CINEMA
When watching ‘all sides panel
format’ films/video tapes, this setting
will eliminate or reduce the black
bars at all sides of the screen by
zooming in and selecting the image
without distortion.
When subtitles are included on a
letterbox format broadcast, this
SUBTITLE
setting will raise the picture to ensure
that all the text is displayed.
SUBTITLE
Use this setting when watching a 14:9
14:9
broadcast.
Download from Www.Somanuals.c3om1. All Manuals Search And Download.
CONTROLS AND FEATURES
This setting will show the picture
without overscan, i.e. WYSIWYG.
NATIVE
This setting will show the picture
without overscan, i.e. WYSIWYG.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.
PC NORMAL
PC WIDE
This setting will show the picture
without overscan or side panels.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.
“Dot by Dot” is a non-scaling display.
Depending on the input signal format,
the picture is displayed with side
panels and/or bars at the top and
bottom (e.g. VGA input source).
Dot by Dot
Press the
button on the remote control to display the list of available widescreen formats.
Press the button repeatedly to highlight the required format.
The Quick Menu feature can also be used to select Picture Size.
AV format
PC format
Picture Size
Picture Size
Wide
PC Normal
PC Wide
4:3
Super Live
Cinema
Subtitle
14:9
Dot by Dot
Native
Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes
of public display or commercial gain may infringe on copyright laws.
Download from Www.Somanuals.c3om2. All Manuals Search And Download.
CONTROLS AND FEATURES
Picture controls
Picture preferences
You can customize current picture mode settings as
desired. For example, while selecting “Dynamic”, if you
change the following items, such as Backlight, Contrast,
Brightness, Colour, Tint, Sharpness and the Advanced
Picture Settings items, your new settings are saved for
“Dynamic” picture mode.
Most of the picture controls and functions are
available in both digital and analogue modes.
PLEASE NOTE: Features not available will be
greyed out.
a
In the Picture menu, press B / b to select either
Backlight, Contrast, Brightness, Colour, Tint or
Sharpness and press OK.
Picture Mode
This television offers the choice of personalising the
picture style.
AutoView, Dynamic, Standard, Hollywood Night,
Hollywood Day, Hollywood Pro, Store, Game and PC
are preset options and affect many features/settings
within the television.
b
Press C / c to adjust the settings and press OK.
Reset
NOTE:
This feature resets all picture settings to the factory
• Because the AutoView mode automatically adjusts
picture settings based on ambient light conditions and
input signal content, the Auto Brightness Sensor and
Expert Mode is greyed out when it is selected.
settings except Picture Mode.
a
In the Picture menu, press B / b to select Reset
and press OK.
• Store mode is only available when Location is set to
Store.
b
A confirmation message will appear. Press C / c
to select Yes and press OK.
• Game mode is available in external input mode (other
than aerial input). When you select Game mode,
suitable widescreen formats will be selected.
• PC mode is available in RGB/PC input mode or HDMI
input mode.
ColourMaster
When ColourMaster is set to On, it allows the ‘Base
Colour Adjustment’ feature to become available.
a
b
Press
and press OK.
and B / b to highlight Picture icon
a
In the Picture menu, press B / b to select
Advanced Picture Settings and press OK.
Press c and B / b to select Picture Mode and
press OK.
b
Press b to select ColourMaster and press c and
B / b to select On or Off.
< Picture
Picture Mode
Reset
Standard
< Advanced Picture Settings
Backlight
0
100
0
On
Off
ColourMaster
Off
Contrast
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor
Active Backlight Control
Black/White Level
Noise Reduction
Resolution+
Brightness
Colour
0
On
High
Tint
0
Sharpness
0
Middle
Advanced Picture Setting
Expert Picture Setting
Display Setting
On
Cinema Mode
High
Reset
c
Press B / b to select the picture mode you prefer
and press OK.
NOTE: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.
Download from Www.Somanuals.c3om3. All Manuals Search And Download.
CONTROLS AND FEATURES
Base Colour Adjustment
Auto Brightness Sensor
The Base Colour Adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an external
source.
When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit
ambient light conditions.
a
In the Advanced Picture Settings menu, press
B / b to select Auto Brightness Sensor and
press OK.
a
In the Advanced Picture Settings menu, press
B / b to select Base Colour Adjustment and
press OK.
b
Press B / b to select On or Off and press OK.
b
Press B / b to select an option and press c to
move to the adjustment window.
Active Backlight Control
Base Colour Adjustment
When the Active Backlight Control feature is activated,
it will control the backlighting levels depending on various
scenes such as picture motion, bright scene or dark
scene.
Hue
0
Saturation
Brightness
Red
0
0
0
0
0
0
0
0
0
0
0
0
Green
Blue
0
0
a
In the Advanced Picture Settings menu, press
B / b to select Active Backlight Control and
press OK.
Yellow
Magenta
Cyan
0
0
0
Reset
Edit
b
Press B / b to select High, Low or Off and press
OK.
High: To control the backlighting levels depending
on various scenes such as picture motion,
bright scene or dark scene
c
d
Press C / c to select Hue, Saturation or
Brightness and press B / b to adjust the settings
as required.
Low: To control the backlighting levels for dark
scene
Hue
0
Saturation Brightness
Red
0
0
Black/White Level
Press BACK to return to the previous menu.
Black/White Level increases the strength of dark areas of
the picture to improve the definition.
To return to the factory settings, select Reset and
press OK.
a
b
In the Advanced Picture Settings menu, press
B / b to select Black/White Level and press OK.
Colour Temperature
Press B / b to select High, Middle, Low or Off
and press OK.
Colour Temperature increases the “warmth” or
“coolness” of the picture by increasing the red or blue tint.
MPEG NR – Noise Reduction
a
In the Advanced Picture Settings menu, press
B / b to select Colour Temperature and press
OK.
When watching a DVD, the compression may cause some
words or picture elements to become distorted or
pixelated.
Using the MPEG NR feature reduces this effect by
smoothing out the edges.
b
c
d
Press B / b to select Colour Temperature and
press OK.
a
b
In the Advanced Picture Settings menu, press
B / b to select Noise Reduction and press OK.
Press B / b to select Cool, Natural or Warm to
suit your preference and press OK.
Press b to select MPEG NR and press OK.
Press B / b to select Red Level, Green Level or
Blue Level and press C / c to adjust the level.
< Noise Reduction
NOTE: To return the adjustments to the factory defaults,
select Reset and press OK.
MPEG NR
DNR
Low
Auto
Download from Www.Somanuals.c3om4. All Manuals Search And Download.
CONTROLS AND FEATURES
NOTE: If the picture mode is set to Game or PC, this
feature is not available.
Expert Picture Settings
This feature is available when the Picture Mode option is
Standard, Hollywood Day, Hollywood Night, and
Hollywood Pro.
c
Press B / b to select Off, Low, Middle or High to
suit your preference and press OK.
Test Pattern
DNR – Digital Noise Reduction
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without
removing the image.
DNR allows you to “soften” the screen representation of a
weak signal to reduce the noise effect.
When you move to a non-Picture menu, or close the
menus, regular video will be restored.
a
b
Select DNR from the Noise Reduction menu.
Press B / b to select Off, Low, Middle, High or
Auto and press OK. The differences may not
always be noticeable (for the best result use lower
settings as picture quality can be lost if the setting
is too high).
a
In the Picture menu, press B / b to select Expert
Picture Settings and press OK.
b
c
Press B / b to select Test Pattern and press OK.
Press B / b to select On and press OK.
NOTE: If the picture mode is set to Game or PC, this
feature is not available.
RGB Filter
Resolution +
This feature individually enables or disables the red,
green, and blue components of the picture to allow for
more accurate adjustment of each colour.
The Resolution+ feature allows you to adjust the clarity
levels for your desired picture settings.
a
b
In the Expert Picture Settings menu, press B / b
to select RGB Filter and press OK.
a
In the Advanced Picture Settings menu, press
B / b to select Resolution+ and press OK.
Press B / b to select Red, Green or Blue to
adjust and press OK.
b
Press B / b to select On.
NOTE:
• This feature may not work properly depending on the
content.
c
d
Press B / b to select On and press OK.
• Noise may appear in the picture depending on the
device connected to the TV (e.g. a device with a specific
enhancer function).
Press B / b to select Colour or Tint and press C /
c to adjust.
e
Press OK.
Cinema Mode
NOTE: It is not possible to turn off all three colours
simultaneously.
Cinema Mode provides smoother motion and a crisper
image.
Colour Decoding
a
b
In the Advanced Picture Settings menu, press
B / b to select Cinema Mode and press OK.
If you view DVDs with this TV, the Colour Decoding option
may be set to ensure the colourimetry reproduction.
NOTE: The modes excluding Auto (BT.709 and BT.601)
are to convert an irregular signal output from the DVD etc.
with incorrect colour to the optimum state. If BT.709 or
BT.601 is selected with a normal signal received, the
colour may not be correctly displayed. This feature should
normally be set to Auto.
Press B / b to select On.
NOTE: When Picture Mode is set to Game or PC, this
feature will be greyed out and automatically set to Off.
Resetting the advanced picture
settings
a
b
In the Expert Picture Settings menu, press B / b
to select Colour Decoding and press OK.
This feature allows you to reset the current Advanced
Picture Settings to the default values.
Press B / b to select Auto, BT.709 or BT.601 and
press OK.
a
b
In the Advanced Picture Settings menu, press
B / b to select Reset.
Press OK.
Download from Www.Somanuals.c3om5. All Manuals Search And Download.
CONTROLS AND FEATURES
White Balance-Window Display
Gamma Calibration
This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.
Toshiba has integrated picture calibration systems into its
LCD televisions. Now you can enjoy the benefits of
automatically calibrated gamma and white levels.
a
b
In the Expert Picture Settings menu, press B / b
to select White Balance and press OK.
In order to take advantage of these features the Toshiba
colour analyzer TPA-1 is required.
a
b
In the Expert Picture Settings menu, press B / b
to select Gamma Calibration and press OK.
Press B / b to select Window Display and press
c and B / b to select On and press OK.
Press B / b to select Apply Calibration and
press c and B / b to select Enabled and press
OK.
White Balance-Setting Type
You can choose from two types of White Balance
adjustment.
c
d
e
Press B / b to select Auto Gamma Calibration
and press OK.
a
In the Expert Picture Settings menu, press B / b
to select White Balance and press OK.
Connect the USB colour analyzer to the USB 1 or
USB 2 port.
b
c
Press B / b to select Setting Type and press OK.
Press C / c to select 2P or 10P and press OK.
Input the target value and place the USB colour
analyzer over the square on screen.
White Balance-2P White Balance
Auto Gamma Calibration
a
Press b to select 2P White Balance and press
OK.
Please input the target value and place the USB colour analyser over
the square.
b
Press B / b to select Red-Offset, Green-Offset,
Blue-Offset, Red-Gain, Green-Gain, or Blue-
Gain.
x
y
A white square will appear on the screen.
Target Colour Temperature
Target Gamma
0.313
0.329
(D65)
2.4
Reset
c
Press C / c to adjust and press OK.
Start
White Balance-10P White Balance
f
Highlight Start and press OK.
Auto Gamma Calibration will start.
a
b
c
Press b to select 10P White Balance.
Press B / b to select IRE, Red, Green, or Blue.
Press C / c to adjust and press OK.
Please wait until you see “Auto Gamma Calibration
has been completed.” on screen.
To return to factory setting
Highlight Reset and press OK.
NOTE: The adjustments made for Red / Green / Blue are
stored separately for each IRE setting. (There are ten IRE
settings from 10 to 100.)
a
Download from Www.Somanuals.c3om6. All Manuals Search And Download.
CONTROLS AND FEATURES
Automatic Format (Widescreen)
Picture Position
When this television receives a true Widescreen picture
and Auto Format is On, it will automatically be displayed
in Widescreen format irrespective of the television’s
previous setting.
The picture position may be adjusted to suit personal
preference and can be particularly useful for external
inputs.
NOTE: The Picture Position feature cannot be selected
in the DTV mode.
a
b
Press
and B / b to highlight Picture icon.
a
b
In the Display Settings menu, press B / b to
select Picture Position and press OK.
Press cand B / bto select Display Settings and
press OK.
Press B / b to select an option and press C / c to
adjust the settings and press OK.
c
d
Press B / b to select Auto Format and press OK.
The options differ depending on the currently
selected widescreen format and the input signal.
Press B / b to select On or Off and press OK.
< Picture Position
< Display Settings
Horizontal Position
Vertical Position
Reset
0
0
Auto Format
4:3 Stretch
On
Off
Picture Position
PC Settings
To return to the original factory settings, select
Reset in the Picture Position menu and press
OK.
4:3 Stretch
When 4:3 Stretch is activated, the size switching system
Picture still
changes 4:3 programmes into full screen picture.
This feature is used to hold a still image on the screen.
a
b
In the Display Settings menu, press B / b to
select 4:3 Stretch and press OK.
a
Press r to hold an image on the screen, and
press r again to cancel.
Press B / b to select On or Off and press OK.
HDMI Information Display
When the HDMI Information Display feature is On and
you are watching an HDMI input source, pressing
displays the HDMI signal information banner.
a
b
In the Options menu, press B / b to select HDMI
Information Display and press OK.
Press c and B / b to select On.
HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate, Aspect, Bit
Depth, Colour Space, RGB/YUV, Chroma Format,
and Content Type (if available).
Download from Www.Somanuals.c3om7. All Manuals Search And Download.
CONTROLS AND FEATURES
• It is recommended to use IEEE 802.11n on 5 GHz for
HD video streaming.
Wireless LAN Information
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
Bluetooth™ and Wireless LAN devices operate within the
same radio frequency range and may interfere with one
another. If you use Bluetooth™ and Wireless LAN devices
simultaneously, you may occasionally experience a less
than optimal network performance or even lose your
network connection.
• It is not recommended to use 2.4 GHz for audio and
video streaming.
• Content playback may be interrupted by various
surrounding interference.
If you should experience any such problem, immediately
turn off either your Bluetooth™ or Wireless LAN device.
Europe Statement
Actual performance can vary, including lower wireless
network capacity, data throughput rate, range and
coverage. Performance depends on many factors,
conditions and variables, including distance from the
access point, volume of network traffic, building materials
and construction, operating system used, mix of wireless
products used, interference and other adverse conditions.
This Built-in WLAN Module may be operated in below
country:
AT
BE
CH
CY
CZ
DE
DK
ES
FI
Austria
IS
Iceland
Belgium
Switzerland
Cyprus
LI
Liechtenstein
Lithuania
Luxembourg
Latvia
LT
LU
LV
MT
NL
NO
PL
PT
SE
SI
Wireless LAN and your Health
Czech Republic
Germany
Denmark
Spain
Wireless LAN products, like other radio devices, emit radio
frequency electromagnetic energy. The level of energy
emitted by Wireless LAN devices, however, is far less than
the electromagnetic energy emitted by wireless devices
such as mobile phones.
Malta
Netherlands
Norway
Finland
Poland
Because Wireless LAN products operate within the
guidelines found in radio frequency safety standards and
recommendations, TOSHIBA believes Wireless LAN is
safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific
community and result from deliberations of panels and
committees of scientists who continually review and
interpret the extensive research literature.
FR
GB
GR
EE
HU
IT
France
Portugal
Sweden
Slovenia
Slovakia
Bulgaria
Romania
Turkey
United Kingdom
Greece
Estonia
SK
BG
RO
TR
Hungary
Italy
In some situations or environments, the use of Wireless
LAN may be restricted by the proprietor of the building or
responsible representatives of the organisation. Such
restrictions may apply in environments where the risk of
interference to other devices or services is perceived or
identified as harmful.
IE
Ireland
• If this device is going to be operated in the frequency
range of 5.15 GHz to 5.35 GHz, it is restricted to indoor
use.
• If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to 2.4835
GHz in France, it is restricted to indoor use.
If you are uncertain of the policy that applies to the use of
wireless devices in a specific organisation or environment,
you are encouraged to ask for authorization to use the
Wireless LAN device prior to turning on the equipment.
• A general authorization is required for using this device
outdoors or in public places in Italy.
When using the TV under wireless LAN
environment:
• This device is NOT ALLOWED to be used in the
geographical area within a radius of 20 km from the
centre of Ny-Alesund in Norway.
NOTE:
• Make the wireless LAN appropriate security setting at
the time of wireless LAN use to prevent the illegal use,
spoofing and interception of communications.
• When Encryption is set to “None”, data transmitted over
a wireless LAN is not securely protected. Unauthorized
users may access your data and network without
appropriate security measures. Selecting an encryption
setting from your Toshiba TV and using a secure
network for wireless LAN transmissions may help avoid
unauthorized access to your important data and/or TV.
Toshiba disclaims any and all responsibility or liability
resulting from any wireless transmissions over the
Internet through your Toshiba TV.
• Don't connect wireless LAN to an outside network
directly.
Apply the wireless LAN access point with router function
or broadband router. Make the router appropriate
security setting to prevent the illegal use.
Refer to the manual of router for a security setting.
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE
802.11n on 5 GHz for audio and SD video streaming.
Download from Www.Somanuals.c3om8. All Manuals Search And Download.
CONTROLS AND FEATURES
Easy Setup using PBC (Push Button
Configuration)
Setting up the Network
You can select the Network Type.
a
b
c
In the Network menu, press B / b to select
Network Setup and press OK.
a
b
Press
and B / b to highlight Network icon.
Press c and B / b to select Network Setup and
press OK.
Press B / b to select Wireless Setup and press
OK.
< Network
Press B / b to select Easy Setup and press OK.
Network Setup
Network Device Setup
Smart Apps Setup
< Wireless Setup
Easy Setup
Assisted Setup
Manual Setup
c
d
Press B / bto select Connection Type and press
c and B / b to select Wired or Wireless.
d
e
f
Press C / c to select PBC.
< Network Setup
Connection Type
Wireless
Wired
Press b to highlight Start Scan and press OK.
Wireless Setup
Wireless
Advanced Network Setup
Network Connection Test
Following the on-screen instructions, push the
appropriate button on your AP.
g
When a window reporting that the setup is
complete appears, press OK.
NOTE: After you change between Wireless and Wired,
switch off and on AC power supply to reset your TV.
Communication may be impossible after the change of
Wireless / Wired.
Easy Setup using PIN (Personal Identification
Number)
a
b
In the Network menu, press B / b to select
Network Setup and press OK.
Wireless Setup
Press B / b to select Wireless Setup and press
OK.
NOTE: Continued connection of AP (Access Point) is not
guaranteed. The connection may be disconnected while
watching TV.
c
d
e
f
Press B / b to select Easy Setup and press OK.
Press C / c to select PIN.
There are 3 methods for Wireless Setup
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
• WPS is an industry standard designed to make
connection of wireless LAN equipment and security
setup easy. WPS will automatically configure all wireless
settings.
Press b to select Start Scan and press OK.
Press B / b to select the desired AP and press
OK.
NOTE: WEP encryption may not be able to configured by
easy setup.
NOTE: Check the Network Name and/or MAC
address on the label of the AP or in the manual,
and select your AP.
Assisted Setup (setup by using the AP’s
notification information)
g
When the PIN code window appears, enter the
displayed PIN into your AP, and then press Next to
continue the PIN Setup. When a message displays
to report that the setup is complete, press OK.
Network Name, Authentication, and Encryption are
decided based on information from the AP. You will
manually set the Security Key.
Manual Setup (manual input of all settings)
To cancel searching for the AP:
Press BACK while searching for the AP. A
message will appear, and then press C / cto select
Yes and press OK.
Download from Www.Somanuals.c3om9. All Manuals Search And Download.
CONTROLS AND FEATURES
Assisted Setup
Manual Setup
a
b
c
In the Network menu, press B / b to select
Network Setup and press OK.
a
b
c
d
e
In the Network menu, press B / b to select
Network Setup and press OK.
Press B / b to select Wireless Setup and press
OK.
Press B / b to select Wireless Setup and press
OK.
Press B / b to select Assisted Setup and press
OK.
Press B / b to select Manual Setup and press
OK.
< Wireless Setup
Press B / b to select Network Name and press
OK. The Software Keyboard window will appear.
Easy Setup
Assisted Setup
Manual Setup
Input the Network Name by using the Software
press the GREEN button.
d
Press B / b to select the desired AP and press
OK.
f
g
Press B / bto select Authentication and press c
and B / b to select Open System, Shared Key,
WPA-PSK or WPA2-PSK.
NOTE: Check the MAC address on the label of the
AP or in the manual, and select your AP.
e
f
Highlight Security Key and press OK. The
Software Keyboard window will appear.
Press B / b to select Encryption and press c
and B / b to select None, WEP, TKIP or AES.
Input the Security Key by using the Software
press the GREEN button.
NOTE:
• Certain encryption types are only compatible
with specific authentication types.
- When Authentication is Open System, only
WEP or None is compatible.
NOTE:
• The Security Key must adhere to these
conditions:
- When Authentication is Shared Key, only WEP
is compatible.
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
- When Authentication is WPA-PSK or WPA2-
PSK, only TKIP or AES is compatible.
• There is only one key ID to set for WEP
encryption.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be
made until the incompatibility is resolved.
g
Highlight Done and press OK.
NOTE: If Network Name is not displayed, see
step 3 and 4 in Manual Setup to set Network
Name before pressing Done.
• There is only one key ID to set for WEP
encryption.
NOTE: Settings are not saved if BACK is pressed before
Done is selected.
h
i
Press B / bto select Security Key and press OK.
Input the Security Key by using the Software
press the GREEN button.
NOTE: This item is greyed out when Encryption is
None.
j
Highlight Done and press OK.
NOTE: When Encryption is None, a message will
appear. Press C / c to select Yes and press OK.
NOTE: Settings are not saved if BACK is pressed before
Done is selected.
Download from Www.Somanuals.c4om0. All Manuals Search And Download.
CONTROLS AND FEATURES
Wireless Information
Item
Status
Description
The settings configured in Wireless Setup can be
confirmed.
Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the
TV is not connected with the AP.
a
b
Press QUICK to open the Quick Menu.
Signal
Connection signal strength with AP
(STRONG/MEDIUM/WEAK)
Press B / b to select Wireless Information and
press OK.
Speed
Mode
Link with AP
Quick Menu
Working mode (11a, 11b, 11g, 11n)
SSID set
Intel® WiDi
Network
Name
Picture Mode
Standard
Wide
Picture Size
More Information
Channel Options
Sleep Timer
Authentication Authentication set
Encryption
Encryption set
HDMI CEC Device Control
Speakers
Security Key
Security Key set
TV Speakers
30
Headphone Level
Wireless Information
Recording Information
AP MAC
Address
The AP’s MAC address is displayed
when the TV is connected with the AP.
TV MAC
Address
The MAC address of the TV(Wireless)
is displayed.
c
When the Network Type is Wireless, a Wireless
Information window will appear.
DHCP
Enabled is displayed when using
DHCP.
Disabled is displayed when not using
DHCP.
NOTE: Press the RED button to scan for all APs.
IP Address
The TV’s IP address
Subnet Mask Value of the Subnet Mask
Default
Address of the Default GATEWAY
Gateway
DNS
Address of the DNS
NOTE: Even if an AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed value might
be low. It is recommended that Encryption be changed to
Notes on wireless LAN environment
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE
802.11n on 5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for
HD video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and
video streaming.
• Content playback may be interrupted by various
surrounding interference.
Download from Www.Somanuals.c4om1. All Manuals Search And Download.
CONTROLS AND FEATURES
d
Highlight Auto Setup and press c and B / b to
select Off.
Advanced Network Setup
NOTE:
IP Address Setup
• When the DHCP function of the router connected with
this TV is On, you can set Auto Setup to On or Off.
(This should usually be set to On.)
Auto Setup
Off
On
Off
IP Address
xxx xxx xxx xxx
.
.
.
Subnet Mask
Default Gateway
xxx xxx xxx xxx
.
.
.
• When the DHCP function of the router is Off, set Auto
xxx xxx xxx xxx
.
.
.
Setup to Off, and set the IP Address manually.
IP Address Setup
Auto Setup
e
f
Press B / b to select IP Address.
Press C / c to highlight the field you want to
change, and then use the number buttons to input
the IP address. To save the setting, press OK.
a
In the Network menu, press B / b to select
Network Setup and press OK.
b
Press B / b to select Advanced Network Setup
and press OK.
NOTE: IP address field numbers must be between
0 and 255. After each field number has been set,
press OK to store the entire address. If the entire
IP Address is invalid, a warning message will
appear after OK is pressed.
< Network Setup
Connection Type
Wireless
Wireless Setup
Advanced Network Setup
Network Connection Test
g
h
Press B / b to select Subnet Mask, and edit in
the same way as IP Address.
IP Address Setup
Off
xxx xxx xxx xxx
Auto Setup
c
d
Press B / b to select IP Address Setup and
press OK.
IP Address
.
.
.
Subnet Mask
Default Gateway
xxx xxx xxx xxx
.
.
.
xxx xxx xxx xxx
.
.
.
< Advanced Network Setup
IP Address Setup
DNS Setup
Press B / b to select Default Gateway, and edit
in the same way as IP Address.
MAC Address
NOTE: If you manually set the IP address, you must not
use the same IP address for any other device. The IP
address you use should be a private address.
Highlight Auto Setup and press c and B / b to
select On.
IP Address Setup
Auto Setup
On
On
Off
IP Address
.
.
.
.
.
.
.
.
.
Subnet Mask
Default Gateway
NOTE: Other items will be greyed out when Auto Setup
is set to On.
Manual Setup
a
b
c
In the Network menu, press B / b to select
Network Setup and press OK.
Press B / b to select Advanced Network Setup
and press OK.
Press B / b to select IP Address Setup and
press OK.
Download from Www.Somanuals.c4om2. All Manuals Search And Download.
CONTROLS AND FEATURES
MAC Address
DNS Setup
You can view the fixed MAC address for the TV (Wired
and Wireless).
NOTE: When the DHCP function of the router connected
to this TV is Off, set Auto Setup to Off, and manually set
the DNS address(es). Your internet service provider
should have provided these to you.
a
b
c
In the Network menu, press B / b to select
Network Setup and press OK.
Auto setup
Press B / b to select Advanced Network Setup
and press OK.
a
In the Network menu, press B / b to select
Network Setup and press OK.
Press B / b to select MAC Address and press
OK.
b
Press B / b to select Advanced Network Setup
and press OK.
Network Connection Test
c
d
Press B / b to select DNS Setup and press OK.
This function checks the Internet connectivity.
Press B / b to highlight Auto Setup and press c
and B / b to select On.
a
b
In the Network menu, press B / b to select
Network Setup and press OK.
NOTE: Other items will be greyed out when Auto Setup
is set to On.
Press B / b to select Network Connection Test
and press OK.
Manual setup
A message will appear to indicate if the connection
was successful or if it could not be completed.
a
In the Network menu, press B / b to select
Network Setup and press OK.
NOTE: The result of Network Connection Test
does not always guarantee the connection.
b
Press B / b to select Advanced Network Setup
and press OK.
To cancel the Network Connection Test:
Press BACK while testing.
a
c
d
Press B / b to select DNS Setup and press OK.
Press B / b to select Auto Setup and press c
and B / b to select Off.
DNS Setup
Off
xxx xxx xxx xxx
On
Off
Auto Setup
Primary DNS Address
Secondary DNS Address
.
.
.
xxx xxx xxx xxx
.
.
.
e
f
Press B / b to select Primary DNS Address.
Press C / c to highlight the field you want to
change, and then use the number buttons to input
the Primary DNS Address. To save the setting,
press OK.
NOTE: DNS address field numbers must be
between 0 and 255. If you input an incompatible
number and press OK, the field number will reset
to the previous value.
g
Press B / b to select Secondary DNS Address,
and edit in the same way as Primary DNS Address.
Download from Www.Somanuals.c4om3. All Manuals Search And Download.
CONTROLS AND FEATURES
Network Device Setup
Using the software keyboard
You can enter text by using the Software Keyboard. The
Software Keyboard window will appear when you press
OK on a field that accepts character input.
Apps Control Profile
Toshiba Apps allow you to control the TV from a network
connected tablet or smartphone (availability is dependent
on country).
To enter text using the software keyboard:
a
Highlight the desired character on the on-screen
software keyboard.
In order to use this function, the Setting up the Network
required. The Device Name will display on the screen of
Apps (tablet or smartphone) application.
b
c
Press OK.
Repeat steps 1 and 2 until you have entered all
desired text.
New Device Detection
a
b
In the Network menu, press B / b to select
Network Device Setup and press OK.
d
Press the GREEN button to save your settings and
return to the previous screen.
Press B / b to select External Control Setup and
press OK.
NOTE: If BACK is pressed, changes are not saved
and the software keyboard window is closed. The
text will remain as it was before starting the
keyboard.
< Network Device Setup
External Control Setup
Media Renderer
Off
Device Name Setup
Intel® WiDi Setup
Open
Done
c
d
Press B / b to select Apps Control Profile and
press OK.
@./
ghi
abc
def
3
q
a
z
w
s
e
d
c
r
f
t
y
h
n
u
j
i
k
,
o
l
p
’
-
_
;
1
4
7
2
5
8
0
g
b
jkl
mno
Press B / b to select New Device Detection and
press c and B / b to select Enabled.
6
9
@
pqrs
tuv
wxyz
x
v
m
.
?&#
< Apps Control Profile
Device Registration Setup
Input operation on the remote control:
Button Description
New Device Detection
Disabled
Enabled
Disabled
OK
0-9
Inputs the selected character.
Selects a character for entry.
Moves the character highlight.
Pairing
To use Apps, it is necessary to connect a compatible
tablet or smartphone and this TV to your home network,
and carry out pairing (using a 4 or 8 digit password to
authenticate the device).
BbC c
RED
Deletes 1 character to the left
of the cursor.
Refer to the Apps manual for more details about pairing.
GREEN
YELLOW
BLUE
Functions as “Done”.
NOTE:
Functions as “Shift” key.
Displays the help window.
• Pairing with external devices cannot be carried out when
the TV is connected to an unencrypted wireless LAN
access point. Activate the encryption settings for the
wireless LAN access point before carrying out Pairing.
BACK
Closes the Software Keyboard
window without saving
changes.
• When the Enable Control is not set to ON in External
Control Setup, Apps functions including Pairing cannot
be used.
Download from Www.Somanuals.c4om4. All Manuals Search And Download.
CONTROLS AND FEATURES
Device Registration Setup
Media Renderer Setup
Once a User Name has completed authentication, it is
stored in the TV along with the password. The upper limit
for the number of Use Names that can be remembered is
20. You can delete User Names that are stored in the TV.
The TV can be configured as a media renderer.
When operating as a media renderer, the TV displays
content provided by a media server.
The selection of the media is done by media controller.
The TV can play photo, movie, or audio files when
operating as a media renderer.
a
b
c
d
In the Network menu, press B / b to select
Network Device Setup and press OK.
a
In the Network menu, press B / b to select
Network Device Setup and press OK.
Press B / bto select External Control Setup and
press OK.
b
Press B / b to select Media Renderer and press
c and B / b to select On.
Press B / b to select Apps Control Profile and
press OK.
If request come from media controller, prompt will appear
and the Media Renderer function will start.
Press B / b to select Device Registration Setup
and press OK.
To exit the Media Renderer:
The Device Registration Setup screen will
appear and the list of Companion Device ID
managed by the TV will be displayed.
Press EXIT.
Terminology
e
f
Press B / b to highlight the Companion Device
ID.
DMS: Digital Media Server
DMR: Digital Media Renderer
DMC: Digital Media Controller
Press B / b to select the Cancel, All, or Delete
buttons and press OK.
NOTE: When re-registering a device which has been
deleted from the list, registration must be carried out
again.
Device Name Setup
The TV’s device name can be changed.
a
b
In the Network menu, press B / b to select
Network Device Setup and press OK.
TV Power On Control (Active
Standby)
Press B / b to select Device Name Setup and
press OK.
The Device Name Setup screen will appear.
When the TV is connected to the home network via
Wireless LAN, with the TV Power On Control in Enabled,
your TV can be turned on by control from Apps.
c
d
Press B / b to select Device Name and press
OK. The Software Keyboard window will appear.
a
b
In the Options menu, press B / bto select Power
Management and press OK.
Input the Device Name by using the software
press the GREEN button.
Press B / b to select TV Power On Control and
press c and B / b to select Enabled (Active
Standby).
NOTE:
NOTE:
• The Device Name can be up to 15 characters
long.
• Depending on the device connected to the home
network, it may take a while for the TV to turn on.
• Only the 0-9, - and A-Z (uppercase only)
characters may be used for the device name.
• Depending on the device connected to the home
network, this feature may not work.
• If the unencrypted Wireless Setup is done, this feature
can not be used.
e
Press b to highlight Done and press OK to save
your setting.
• The power consumption during Active Standby is more
than it during Normal Standby.
• After the change from Power On state to Active Standby,
there may be a period of several ten seconds which
does not receive the operation from a remote control or
external apparatus.
Download from Www.Somanuals.c4om5. All Manuals Search And Download.
CONTROLS AND FEATURES
USB HDD Record Function
Setting up the USB HDD for
recording
This function can be used to record and play
digital broadcast programmes (function is
dependant on country selection). Read the
precautions below before recording or viewing
programmes using the USB HDD record
function.
To connect a USB HDD (not supplied):
USB1 or USB2
on the TV
NOTE:
• In order to use this function, a USB HDD needs to be
connected to the TV. Do not use USB Hub.
USB cable
(not supplied)
• After recording operation, time may take to a recording
start.
USB HDD
• Recorded programmes saved on the USB HDD can only
be viewed on this TV. They cannot be viewed when
connected to another TV (including the same model of
TV), a PC, or other device.
When you connect a USB HDD to the USB port on the TV,
a prompt will appear.
a
Press C / c to select No and press OK.
• You cannot watch one channel while recording another.
NOTE: Not guaranteed to work with all USB HDD.
• If the recording time to the USB HDD is too short, no
data may be saved.
• You cannot record video input signals on the USB HDD.
• Not all types of broadcast may be recordable.
To record DTV programmes
(One Touch Recording)
• After programming the TV to record digital broadcasting,
do not disconnect the power plug before recording
starts. Doing so may cause scheduled recordings to fail
even when the power switch is set to “ON”.
To record the programme currently being viewed.
a
Press the zREC button on the remote control.
The currently viewed programme will start to be
recorded.
• Should video or audio recording fail due to malfunction
of the TV or poor reception, no compensation shall be
paid.
• If there is a power failure or the power plug is
disconnected during programmed recording, recording
will stop and will not resume when the power returns or
the plug is reconnected.
To stop recording:
a
Press the v (stop) button.
A confirmation window “Do you want to stop
Recording?” will appear.
• Do not disconnect the power plug when the indicator
LED is lit.
• Any changes implemented by the broadcasting station
may affect programme scheduling.
b
Press C / c to select Yes and press OK.
Recording will stop.
• Scheduling of multiple consecutive programmes may
result in the beginning of each programme not being
recorded.
• Accurate start / finish time for recording is reliant on
broadcasters maintaining correct time stamp if this not
the case the recording will fail.
• Some broadcasters can control whether a program can
be recorded or how long you may be able to view it for
after recording. The on screen message “Retention limit
expired” means that the time limit for viewing the
program has lapsed.
• Programmed recording cannot take place if the power
plug is not connected.
• Disconnecting the power plug during recording may
result in failure to save the recorded programme.
• USB HDD recording feature is not available in all
countries.
• When the USB HDD is formatted, all the data stored on
the HDD will be erased.
Download from Www.Somanuals.c4om6. All Manuals Search And Download.
CONTROLS AND FEATURES
To search for and record a programme using
Genre Search:
How to set recordings via the
Programme Guide
a
Press the YELLOW button on the remote control
to access the Genre Search screen.
Programmed recording can be scheduled easily using the
Programme Guide or by specifying the date and time.
PLEASE NOTE
Genre Search
Movie
5:48 Tue, 22 Apr
When a timed programme is about to start, an information
screen will appear offering the option of watching or
cancelling the programme. Other channels will not be
available during the timed programme unless the
programme timer is cancelled.
34 AB1
Hard Rain
Wed,27 Apr 0:15-1:45
Wed,27 Apr 22:15-23:55
Thu,28 Apr 1:20-3:00
31 PARIS PREMIERE
11 NT1
W9
Red Corner
The Lawnmower Man
A Vow to Kill
Parenthood
9
Fri,29 Apr
1:30-3:00
34 AB1
Sat,30 Apr 0:45-2:40
Sat,30 Apr 1:15-3:00
Sat,30 Apr 15:00-17:30
Sat,30 Apr 23:20-1:15
Sun,1 May 0:40-2:00
Sun,1 May 0:40-2:20
It will only be possible to create or edit programme timers
for the currently tuned DTV input.
11 NT1
Body and Soul
The Nun’s Story
Red Corner
31 PARIS PREMIERE
9
W9
11 NT1
The Real Blonde
Critters
Using the Programme Guide to set future
recordings
31 PARIS PREMIERE
11 NT1
Indiana Jones and the Temple of Doom Sun,1 May 21:10-23:20
11 NT1
The jackal
Sun,1 May 23:20-1:15
Mon,2 May 1:10-3:00
a
b
c
Press GUIDE on the remote control to display the
Electronic Programme Guide (EPG).
34 AB1
Coup De Ville
Press BbC cto highlight the programme you want
to record and press OK.
b
c
Press C / c to select the genre. Programmes listed
will change for the new genre. Press B / b to
select the programme for which you want to
schedule recording.
The Edit Timer screen will appear.
Press B / b to select Timer Type.
Press OK. The Edit Timer screen will appear.
Press B / b to select Timer Type.
Edit Timer
10:50 Tue, 26 Apr
The Daily Politics
2
CABC Channel
Edit Timer
10:50 Tue, 26 Apr
11:30 - 12:30 Tue, 26 Apr
The Daily Politics
Timer Type
Recording
2
CABC Channel
11:30 - 12:30 Tue, 26 Apr
Set Timer
Delete Timer
Timer Type
Recording
Set Timer
Delete Timer
d
e
Press cand B / bto select Recording and press
OK.
d
e
Press cand B / b to select Recording and press
OK.
Press B / b to highlight Set Timer and press OK.
Press B / b to highlight Set Timer and press OK.
Download from Www.Somanuals.c4om7. All Manuals Search And Download.
CONTROLS AND FEATURES
To programme the timer:
To schedule a programme using the
information screen:
a
b
Press the BLUE button on the remote control.
a
Press
, the information screen will appear
giving details of the channel and programme
currently being viewed.
Select the unprogrammed column (blank column)
and press OK.
The Edit Timer screen will appear.
Press B / b to select Timer Type.
4
CHANNEL Z
English
6:00 Thu, 11 Oct
D+
Edit Timer
5:51 Tue, 22 Apr
Timer Type
Channel
Reminder
30 CABC Channel
Now
MLB Young’s two-run triple leads AL over NL 6:00- 8:00
Date
Tue, 22 Apr 2013
10:51
Start Time
End Time
Repeat
11:51
News
15 min left
8:00- 9:00
AD 18
HD 16:9
Next
Once
World News and Sports
Set Timer
Delete Timer
Also
MLB Young’s two-run triple leads AL over NL
Change
c
d
Press cand B / bto select Recording and press
OK.
b
Press B / b to select Next and press OK. The Edit
Timer menu will appear.
Press B / b to select Timer Type.
Press B / bto go through the list adding the details
of the programme by using the number buttons
and C / c to make selections.
Edit Timer
10:50 Tue, 26 Apr
The Daily Politics
• Channel
2
CABC Channel
11:30 - 12:30 Tue, 26 Apr
Select the channel you wish to record.
Timer Type
Recording
• Date
Select the date that you wish recording to start.
Set Timer
Delete Timer
• Start Time
Select the time to start recording.
c
d
Press cand B / b to select Recording and press
OK.
• End Time
Select the time to end recording.
Press B / b to highlight Set Timer and press OK.
• Repeat
Select “Once”, “Daily” or “Weekly”.
Once
Daily
The selected content is recorded once.
The same time slot on the same channel is
recorded every day on and after the selected
day.
Weekly The same time slot on the same channel on
the same day of the week is recorded on and
after the selected day.
e
Press B / b to highlight Set Timer and press OK.
Download from Www.Somanuals.c4om8. All Manuals Search And Download.
CONTROLS AND FEATURES
To check, edit or delete scheduling
information
To view a recorded programme
To view the recorded Library screen and select a title
from the recorded programme list.
You can check, edit or delete scheduling information.
a
Press
and highlight My Recordings icon and
a
Press GUIDE and then press the BLUE button.
Programme Timers screen will appear.
press OK. The Library screen will appear.
Library / All
All
14:15 Wed, 16 Feb
Recording List
• Depending on the transmitter information, the
programme broadcast time or other information
may not be correctly displayed in the recording
list.
Sort : New
WWWWWW
3 / 5
Wed, 16 Feb 10:00
Wed, 16 Feb 10:00
Thu, 17 Feb 10:00
Thu, 17 Feb 10:00
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Sat, 19 Feb 10:00
Sun, 20 Feb 10:00
Sun, 20 Feb 10:00
Sun, 20 Feb 10:00
Mon, 21 Feb 10:00
WWWWWWWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
• The programme does not appear in the
recording list immediately at the start of
recording, but appears a few minutes after
recording starts.
1235 ITV London
ASTRA 19.2°E
10 July 2011 14:30(01:30)
USB HDD3
Remaining Capacity:
86% (912.0GB)
• Up to 500 programmes can be displayed in the
recording list.
• If the channel settings are changed, the digital
channel number, or other information may not
appear correctly in the recording list.
• As the displayed programme time is calculated
from the actual recording information, it may not
match the recording time on the USB HDD.
b
c
Press B / b to select the title you want to view.
A preview of the content selected can be seen on
the preview screen.
To check a schedule:
To change the order in which the titles are listed,
press the BLUE button.
a
Press B / b on the Programme Timers screen to
check the schedule.
Press OK.
Viewing starts.
To edit a schedule:
● icon appears next to the title currently being
recorded.
When the title currently being recorded is selected
and OK is pressed, playback will start from the
beginning of the programme currently being
recorded.
a
Press B / b on the Programme Timers screen to
select the title whose schedule you want to edit
and press OK.
The Edit Timer screen will appear. Change the
settings as required, following the same procedure
as for setting the schedule.
Operations during viewing
b
Press B / b to highlight Set Timer and press OK.
The following operations can be performed using the
remote control buttons.
To delete a schedule:
c
v
W
To PLAY
To STOP
cc
z
To FAST
FORWARD
To SKIP-
FORWARD
To shift playback
position
a
Press B / b on the Library screen to select the
title whose schedule you want to delete.
To PAUSE/STEP C c
b
Press the RED button.
Press C / c in the displayed confirmation window
to select Yes and press OK. The selected
schedule will be deleted.
Z
To SKIP-BACK
To REWIND
CC
NOTE: You can also delete a schedule by selecting
Delete Timer from the Edit Timer menu for each
programming method.
Download from Www.Somanuals.c4om9. All Manuals Search And Download.
CONTROLS AND FEATURES
c
Input your desired title by using the software
to save your settings.
Operations from the Library screen
As well as viewing the list of recorded titles on the Library
screen, you can protect or delete titles and register titles to
Personal Mode.
To delete a recorded programme:
To display the Library screen:
a
b
Press the RED button. Check boxes will appear
next to the titles.
a
Press
and highlight My Recordings icon and
press OK. The Library screen will appear.
Press B / b to select the title you want to delete
and press OK. A check mark will be inserted in the
check box.
Library / All
All
14:15 Wed, 16 Feb
Sort : New
WWWWWW
3 / 5
Wed, 16 Feb 10:00
Wed, 16 Feb 10:00
Thu, 17 Feb 10:00
Thu, 17 Feb 10:00
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Sat, 19 Feb 10:00
Sun, 20 Feb 10:00
Sun, 20 Feb 10:00
Sun, 20 Feb 10:00
Mon, 21 Feb 10:00
Library / All
All
WWWWWWWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
1235 ITV London
ASTRA 19.2°E
Sort : New
WWWWWW
Wed, 16 Fe
10 July 2011 14:30(01:30)
USB HDD3
Remaining Capacity:
86% (912.0GB)
WWWWWWWWWWWW Wed, 16 Fe
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
WWWWWWW
Thu, 17 Fe
Thu, 17 Fe
Fri, 18 Fe
Fri, 18 Fe
Fri, 18 Fe
Sat, 19 Fe
To protect or unprotect a recorded programme:
Protecting a programme prevents it from being
accidentally deleted.
To insert a check mark against all the titles, press
the YELLOW button.
Select the title of the programme you want to protect and
To uncheck all the check boxes, press the BLUE
button.
press the GREEN button.
icon appears next to the title
and the programme is protected.
NOTE:
If Protect is set to On when the programme is recorded,
icon appears next to the title of the recorded
programme.
• A check mark will not be inserted against
protected titles.
• Note that once deleted, a title cannot be
restored.
When a title with
button is pressed,
is unprotected.
icon is selected and the GREEN
icon disappears and the programme
c
Press the RED button.
Select Yes in the confirmation window and press
OK.
To group the recorded programmes
All the titles with check marks will be deleted.
a
b
Press B / b on the Library screen to select the
title whose schedule you want to group.
USB HDD capacity
You can check the remaining capacity of the USB HDD
using Remaining Capacity.
Press the YELLOW button. A grouping mode
window will appear.
Thu, 17 Feb 10:00
Thu, 17 Feb 10:00
Week: Grouping the recorded programme by the
day (Sunday - Saturday)
Genre: Grouping the recorded programme by the
genre.
1235 ITV London
ASTRA 19.2°E
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Fri, 18 Feb 10:00
Sat, 19 Feb 10:00
Sun, 20 Feb 10:00
Sun, 20 Feb 10:00
Sun, 20 Feb 10:00
Mon, 21 Feb 10:00
10 July 2011 14:30(01:30)
USB HDD3
Remaining Capacity:
86% (912.0GB)
To change the title of recorded programme
a
b
Press QUICK when the Library screen is
displayed.
NOTE: The remaining capacity displayed is only a guide;
it is not guaranteed.
Press b to select Title Edit and press OK.
The Software Keyboard window will appear.
Download from Www.Somanuals.c5om0. All Manuals Search And Download.
CONTROLS AND FEATURES
To select the TimeShift Size:
Recording Setup
a
b
In the Recording Setup screen, press B / b to
select TimeSift Size.
You can set your preferences for recording.
To select USB HDD and Partition for
Recording:
Press c and B / b to select 512 MB, 1 GB, 2 GB
or 4 GB and press OK.
a
b
Press
and B / b to highlight Options icon.
To use TimeShift recording:
Press c and B / b to select Recording Setup
and press OK.
Time Shift recording allows you to pause live TV for a
fixed period of time.
For Example: If you move away from the TV for a short
period, such as when the phone rings while you are
watching TV, you can easily pause live TV and then
continue to view from the same point in the programme
when you return.
c
Press B / b to select Select Device and press
OK. USB HDD and Partition list will be appear.
If USB HDD is partitioned by PC, several partitions
will be displayed.
< Recording Setup
Select Device
a
Press W on the remote control while viewing the
DTV programme.
The screen will switch to a still image and
recording will start automatically.
The recording time is decided by TimeShift Size.
If the TimeShift file size reaches the limit set, then
the TV will continue to be paused, but the
recording buffer will be reset to the beginning.
One Touch Recording Time
TimeShift Size
120 Minutes
4GB
Start Padding Time
End Padding Time
Device Test
None
None
Format Device
d
Select USB HDD and Partition you want to
recording.
b
c
Press c (play).
Catch-up viewing will start from where the
programme was paused.
To set the recording time for One Touch
Recording:
Press v (stop) to stop the recording.
a
b
Press
and B / b to highlight Options icon.
To set the padding time for programmed
recording start time and end time:
Press c and B / b to select Recording Setup
and press OK.
a
b
In the Recording Setup screen, press B / b to
select Start Padding Time.
c
Press B / b to select One Touch Recording
Time and press c and B / b to select the
recording time.
Press C / c to select a time.
You can select from None, 3 minutes, 5 minutes,
10 minutes, 15 minutes, 30 minutes, and 45
minutes.
< Recording Setup
Select Device
Programme End Time
30 Minutes
One Touch Recording Time
TimeShift Size
120 Minutes
4GB
Recording will start at the selected number of
minutes prior to the recording start time.
60 Minutes
Start Padding Time
End Padding Time
Device Test
None
90 Minutes
None
120 Minutes
150 Minutes
180 Minutes
210 Minutes
240 Minutes
270 Minutes
300 Minutes
330 Minutes
c
d
Press B / b to select End Padding Time.
Format Device
Press C / c to select a time.
You can select from None, 3 minutes, 5 minutes,
10 minutes, 15 minutes, 30 minutes, and 45
minutes.
Recording will end at the recording end time plus
the selected number of minutes.
You can set the Programme End Time in 30-
minute increments in the range of 30 minutes to
330 minutes.
Download from Www.Somanuals.c5om1. All Manuals Search And Download.
CONTROLS AND FEATURES
To perform a USB HDD operation test:
Using the Cloud TV Service
a
In the Recording Setup screen, press B / b to
select Device Test and press OK.
Toshiba's universal portal for internet content
and services (services are dependant on
country).
USB HDD operation test will start.
Wait until the test ends.
NOTE: You need to configure a home network before
NOTE: The results of the device test are only a guide. The
device may not function as shown in the results.
a
b
Press
.
To format a USB HDD:
The menu screen of the Cloud TV service will
appear.
a
In the Recording Setup screen, press B / b to
select Format Device and press OK.
Press BbC c to select a Cloud TV service, and
press OK.
For the operations of the Cloud TV service, refer to
Cloud Guide.
b
Press C / c to select Yes in the confirmation
window that will appear and press OK. Formatting
will start.
Wait until formatting ends.
Using Web Browser
NOTE:
• If the USB HDD is separated several partitions by PC
and multiple Partition appear on the Device List screen,
press B / b to select the Partition you want to format.
The web browser on this TV lets you explore everything
the web has to offer. Along with access to popular places,
you'll be able to search for and browse your favourite sites.
• When the USB HDD (or Partition) is formatted, all the
data stored on the USB HDD (or Partition) will be
deleted.
NOTE:
• Certain services may not be currently available in your
area.
• Your registration or login may be required to use some
services.
Scheduling priority
• Third party internet services are not provided by
Toshiba, may change or be discontinued at any time and
may be subject to Internet service provider restrictions.
Toshiba makes no warranties, representations, or
assurances about the content, availability or
functionality of third-party content or services. Use of
third party Internet services may require the creation of
a separate account through a computer with Internet
access and/or payment of one-time and/or recurring
charges and membership.
If scheduled time slots are next to each other and there is
more than one minute between the end time of the first
schedule and the start time of the next schedule,
programmed recording will be performed correctly.
• When Start Padding Time and End Padding Time are
time plus the additional minutes.
If scheduling times overlap, priority will be given to the
programmed recording which starts first. When the
programmed recording that started first ends, recording
will switch to the next scheduled programme. At this time,
depending on how far the scheduling times overlap, the
beginning section of the next scheduled programme may
not be recorded.
Not all third party services may be available on or
compatible with this product. In order to experience the
full suggested capabilities of this product, fully-
compatible devices may be required.
- does not support platform-dependent technologies
such as Active X.
- only supports preinstalled plug-ins.
- may not support media formats other than the
following: JPEG/PNG/GIF.
- uses a single built-in font. Some text may not be
displayed as intended.
- does not support downloading of files or fonts.
- is a TV browser. It may work differently than PC
browsers.
- does not support parental control or locks in the
content, and it is the responsibility of the you to monitor
browser usage by minors.
• Some pages may not be displayed correctly or may
display differently on different devices.
• Certain services may not be available in your area.
Download from Www.Somanuals.c5om2. All Manuals Search And Download.
CONTROLS AND FEATURES
To use the web browser
To browse favourite websites
NOTE: You can change the mouse mode (Mouse
Emulation or Navigation) by pressing the GREEN button
on the remote control when the web contents screen is
open.
a
b
c
d
Press
on the remote control and select
Internet icon to open the web browser.
Use BbC c to select Favourites STAR and press
OK.
a
b
c
Press
on the remote control and select
Internet icon to open the web browser.
Select the item or folders to move to the desired
URL address and press OK.
Press BbC c to select the URL address bar and
press OK.
You can now browse websites on your TV using
BbC c on the remote control.
Enter the desired URL address by using the
PIP (Picture-in-picture) function
Press the GREEN button on the remote control.
When viewing the web browser page, currently airing
programmes or images from external inputs can be
displayed in a PIP window (sub-screen).
d
You can now browse websites on your TV using
BbC c buttons on the remote control.
a
Press the RED button while viewing the web
browser page.
To Add Favourites Websites
The currently airing program or images from
external inputs are displayed in a PIP window.
By adding frequently visited websites to Favourites, you
can browse them easily. You can view the addresses of
the websites you visited previously.
NOTE:
• The position of the PIP window, and whether it is
displayed or not can be set in the web browser settings.
a
b
c
d
e
Press
on the remote control and select
Internet icon to open the web browser.
• PU and Pu buttons cannot be used when the PIP
window is displayed.
Enter the desired URL address by using the
To stop displaying the PIP window:
Press the RED button when the PIP window is displayed.
Press BbC c to scroll Favourites STAR on the
Toolbar and press OK.
Press OK to save the desired website to your
Favourites.
Press BACK on the remote to return to browsing
your website.
You can press the GREEN button on the remote
for thumbnail view of all your Favourites.
NOTE: The desired website is highlighted and displayed
on the top row with the + icon. The + icon will change to a
page icon after the website has been saved to Favourites.
Download from Www.Somanuals.c5om3. All Manuals Search And Download.
CONTROLS AND FEATURES
Getting started
Using Skype
a
b
Press
on the remote control.
Skype-ready Toshiba TVs bring your family and friends
closer to your home. Skype on your Toshiba TV allows
you to share special moments no matter the distance.
Press BbC c to select Skype icon and press OK.
Before using Skype - Preparation
“Welcome to Skype” screen appears.
• Connect the FREETALK HD Camera: TALK-7291 to the
TV’s USB terminal. Do not use a USB hub.
For a Skype-ready Toshiba TV compatible camera,
please visit the following website: http://
shop.skype.com
Welcome to Skype
Press [OK]
Skype Name
Password Press [OK]
• Arrange the HD camera on top of the TV, ensuring it's in
the centre.
Sign in when Skype starts
Start Skype when TV starts
• Connect to the network.
NOTE:
Sign in
Create Account
• The HD camera is sold separately.
• Do not connect a camera other than the recommended
HD camera.
You can select a Skype name from the Skype
Name drop down menu.
• Using a wireless network may result in degraded call
quality.
c
Select Sign in or Create Account.
• Some of the features available on other versions of
Skype are not available on the television.
To create a new account:
• When using Skype, some functions of the TV will not be
available.
If you do not already have a Skype account, you can
create a new one from your TV.
• The sound settings are switched to Skype mode.
a
Select Create Account in the Welcome to Skype
screen and press OK.
• If you cannot hear the person you're speaking with,
check your TV volume.
• When Optical Digital output or Analogue output is used
and you are signed in, the ring tone may not sound.
Create new Skype account
Full Name 1~70 characters
• The volume level on Skype may differ from other
features on your TV.
Skype Name
Password
6 and 32 characters
6~20 characters
• When the Reset TV feature is used from the TV Menu,
Skype information is reset to factory default settings.
Repeat Password 6~20 characters
Email Press [OK]
• Screenshots used in this manual may differ from the TV
Menu, Skype will be reset to its factory default settings.
Yes, send me Skype news and special offers.
I have read and accept.
the Skype Terms of Use
the Skype Privacy Statement
No emergency calls with Skype
I agree - create account
Cancel
Skype cannot be used for emergency calls.
Create new Skype account
Full Name 1~70 characters
6 and 32 characters
Skype Name
!
“
W
S
£
E
D
C
$
R
F
V
%
T
^
Y
H
N
&
U
J
*
I
(
)
P
:
_
{
+
}
Q
A
Z
O
L
>
Alt
|
G
B
K
<
@
~
X
M
?
Enter
Download from Www.Somanuals.c5om4. All Manuals Search And Download.
CONTROLS AND FEATURES
Basic Operation
b
c
Enter your Full Name, Skype Name, Password,
Repeat password, and Email.
Press B / b to select a tab (Contacts/People, Recent,
Settings). Press c and B / b to select a contact from the
list.
Your contact list will contain the following information:
Contact name / Current online status / Profile picture /
Mood message
• If you want to receive Skype news and special
offers, check the selection box. Skype will inform
users about new products, features and special
offers by email.
Your profile picture, status, Skype Name, mood message and
available Skype Credit.
Select “I agree - create an account” and press
OK.
Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit
d
You'll now be signed into your new account.
Contacts/People
Name Name
TextTextTextTextTextTextTextTextText
NOTE:
Name Name
• Please ensure that you have entered your email address
correctly. It is required in case you lose or forget your
password.
TextTextTextTextTextTextTextTextText
Name Name
TextTextTextTextTextTextTextTextText
Name Name
TextTextTextTextTextTextTextTextText
• If you forget your password, visit skype.com to retrieve
it.
+8888888888888
Status
Add Contact
Exit
• If a message appears informing you that the entered
Skype name is already registered, please choose a
different name.
Tab
Status: Change your availability status
Add Contact: Add a Skype account or phone number
EXIT:Return to previous screen. When at contact list, the EXIT
button will close Skype application without sign out.
To Sign into Skype:
If you have a Skype account, sign into Skype in the
Welcome to Skype screen.
The current status for each of your contacts are explained below:
: Online
: Offline
: Do not disturb
: Away
: Phone number
: Offline with voice messaging or
call forwarding enabled
a
b
Enter your Skype Name and Password.
Select Sign in and press OK.
Contacts/People
• If “Sign in when Skype starts” is checked, your
account will sign in automatically when you
launch Skype from the menu.
Press B / b to select Contacts/People tab. Press c and
B / b to select a contact.
• If “Start Skype when TV starts” is checked,
your account will sign in automatically when you
turn on the TV.
When pressing OK at each contact, the following functions
will appear:
Both these options can be selected together.
No blocked contactor
Name
- TextTextTextTextTextTextTextTextTextTextTxtText
Skype Credit
Contacts/People
Name Name
Name Name
TextTextTextTextTextText
Name Name
TextTextTextTextTextText
Video call
Voice call
Name Name
TextTextTextTextTextText
View Profile
Send Voice Message
Block
Nme Name
TextTextTextTextTextText
Remove
+8888888888888
Status
Add Contact
Exit
Initiate Video Call
Initiate Voice Call
View Profile
-View contact profile (including Skype name, full
name, birth date, gender, location, mobile
number and email).
Send Voice
Message
-Send Voice Message to contact
Block
Remove
-Block / unblock contact
-Remove contact from list
Download from Www.Somanuals.c5om5. All Manuals Search And Download.
CONTROLS AND FEATURES
Video or Voice call
Incoming call
Press BbC c to select Video call or Voice call, your
screen will now display your call as shown below.
Incoming calls on Skype will be displayed on the bottom
right hand corner of your TV screen. You'll also hear a ring
tone which can be adjusted using the VOLUME buttons on
your remote control.
Video call
Own side
Other side
Incoming Call...
Name
Video
Voice
Decline
You are given three options when an incoming call arrives:
• Video : Answer by video call.
Voice call
• Voice : Answer by voice call.
06:34:45
xxxx
• Decline: Decline the incoming call.
NOTE: If other applications are active or recording, you'll
only get an “Incoming call notification“ until the application
or recording has stopped.
ABC
DEF
GHI
JKL
MNO
WXYZ
PQRS
TUV
+
Status
When you press the GREEN button, the change status
window will appear as below. You can change your status
by pressing B / b and OK. Press BACK to exit.
Below is all icon pictures in conversation window.
Start video
Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit
Stop video
s/People
Online
Name Name
Do not disturb
TextTextTextTextTextTextTextTextText
Resume the call
Away
Name Name
TextTextTextTextTextTextTextTextText
Invisible
Unmute the webcam mic
Mute the webcam mic
Normal size video
Name Name
Sign Out
TextTextTextTextTextTextTextTextText
Name Name
TextTextTextTextTextTextTextTextText
+8888888888888
Full screen video
Status
Add Contact
Exit
Open dial pad
End call (Hang up the call)
Group calls
Using your Toshiba TV, you can join Skype group voice
and video calls. However, you can only send and receive
audio whilst on these calls.
NOTE: You must be invited on to a group call, you cannot
initiate it from the TV.
Download from Www.Somanuals.c5om6. All Manuals Search And Download.
CONTROLS AND FEATURES
When you receive a contact request, a pop-up menu will
appear where you can choose to Accept, Block or
Decline the request.
Add Contact
You can add contacts to your list of contacts.
When you press the YELLOW button, the Add Contact
Type menu window will appear.
Press B / b to select and press OK.
Request Form
Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit
ms_audi
Contacts/People
john5678236
Add Contact Type
N
T
Skype Contact
T
Phone Number
T
Exit
Exit
T
+8888888888888
Press C / c button to select and press OK.
Status
Add Contact
Exit
ms_audi
Two sub-functions are supported.
Hello! Please add me to your Contacts.
Press B / b to select Skype Contact or Phone Number
and press OK.
• Skype Contact
Enter the Skype Name of the person you're looking for.
The search result will show up after get response from
Skype server.
Accept
Block
Decline
• Phone Number
Recent
You can also enter a phone number in the search
window.
You can see a list of past events in “Recent”.
Press B / b to select the Recent tab. Press c and B / b
to select an item and press OK.
Contact Search Results
Add a Skype contact
Search Result: (jackyding)
Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit
Full Name
Skype Name
Country
Aaaaaa_0101
Bbbbbb007
Cccccc0709
Ddddddd
Aaaaaa_0101
Bbbbbb007
Cccccc A01
Ddddddd Ddd
EE_Eeeee
USA
Recent
Name Name
UK
Name Name
HK
Tue Jul
3
04:07:47 2012
Duration 00:10:00
Duration 00:00:00
Duration 00:01:06
Taiwan
Japan
Taiwan
Taiwan
Name Name
Tue Jul 03:44:58 2012
Name Name
Mon Jul 10:01:11 2012
Name Name
Mon Jul 06:36:49 2012 Duration 00:03:04
Video call
Voice call
3
Eeeeee_Eeee
Ffffffffff_Fu
Gggggg_Ggg
Ffffffffff_Ff
View Profile
Send Voice Message
Listen to Voice Message
Add to Contacts
2
Gggggg_Ggg
Back
2
Delete This Item
Name Name
Tue Jun 28 03:30:17 2012
Duration 00:00:08
You can send a contact request to a person displayed in
the search results. Press B / b to select a person and
press OK.
Status
Add Contact
Exit
Press C / c to select Video call or Voice call.
Notification of authorization request
Each call has an icon with it. The meaning of each icon is
as follows:
Name
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit
Icons Description
Contact List
Name Name
TextTextTextTextTextTextTextTextText
Incoming call
Name Name
TextTextTextTextTextTextTextTextText
Name Name
TextTextTextTextTextTextTextTextText
Outgoing call
Name Name
TextTextTextTextTextTextTextTextText
Missed call
Notification
+8888888888888
You have received a contact request.
Unread Voice Message
Voice message
Status
OK
Download from Www.Somanuals.c5om7. All Manuals Search And Download.
CONTROLS AND FEATURES
Dialer
Settings
You can call mobiles and landlines from this screen.
Press B / b to select the Settings tab and press OK.
The Settings window will appear.
Press B / b to select the Dialer tab. Press c and B / b
to navigate this screen.
Name
Name Name
User Profile
- TextTextTextTextTextTextTextTextTextTextTextText
Skype Credit
(1/2)
Change Password
Dialer
Gender -Select One-
General Settings
Birth Date
(D)
(M)
(Y)
Please input the country code
-Select One-
Audio Settings
Privacy Settings
Blocked Contacts
Call Settings
Country/Region -Select One-
State/Province
City
Press [OK]
Press [OK]
Taiwan
+886
+992
+255
+66
Tajikistan
Tanzania
Thailand
Timor-Leste
Togo
Home Phone
Press [OK]
Press [OK]
Press [OK]
+670
+228
Office Phone
Mobile Phone
About Skype
Exit
Status
Add Contact
Exit
You can change the following settings:
Select the country or region first, and then enter the phone
number with area code. You'll need a little Skype Credit in
your account to call mobiles or landlines using Skype.
Emergency calls over Skype are not supported.
• User Profile
Add or change your personal information e.g. birth date,
country/region or phone number.
• Change Password
You can change your password by entering your
existing password and new password twice.
• General Settings
Select whether Skype should automatically start when
turning on the TV.
• Audio Settings
Adjust the speaker / ringtone volume manually.
The volume of your speakers will be different on Skype
compared to your normal TV volume level. The speaker
volume range is 0 - 100 % by 1 steps, and ringtone
volume is 0 - 100 % by 25 steps.
• Privacy Settings
Set who you allow calls from, whether it's Anyone or
People in my Contact list only.
• Blocked Contacts
If you do not want someone to reach you, simply block
them by entering their Skype Name or phone number
from this menu. Successfully blocked contacts are
displayed in this window.
• Call Settings
If you're not signed into Skype, you can forward
incoming calls to another phone number or Skype name,
or choose to accept voice messages. However you'll
need to have Skype Credit to turn this feature on.
• About Skype
Displays information about Skype.
Download from Www.Somanuals.c5om8. All Manuals Search And Download.
CONTROLS AND FEATURES
®
Using Hybrid TV Standard
(if available)
Using Intel Wireless Display
®
®
Intel Wireless Display (Intel WiDi) is
supported on this TV. You can use your TV as
second display for PC with Intel Wireless
Display.
Hybrid TV Standard enables the TV to receive
HbbTV services. TV services which support this
feature often show “press RED” on the screen.
®
a
b
Press QUICK to open the Quick Menu.
NOTE: You need to configure a home network before
using this feature (see page 12).
®
Press B / b to select Intel WiDi and press OK.
a
b
c
Press
and B / b to highlight Options icon.
A prompt will appear on the screen. Select Yes.
Press c and B / b to select Hybrid TV Standard.
®
c
Launch the Intel WiDi software on your PC and
select “scan for available adaptors”.
Press C / c to change from Disabled to Enabled
and press OK.
®
Intel WiDi device name and ID list will then be
displayed on the PC screen.
When “press RED” is indicated on the screen,
press the RED button to access HbbTV service
site, and then press BbC c to select the desired
contents.
Select the TV which you wish to connect to.
“Connecting” will be shown on the TV.
d
Connecting your PC to your TV the first time
NOTE:
• The HbbTV service indication or required key operations
may not be possible depending on the service contents.
In this case set the Hybrid TV Standard setting to
Disabled.
When selecting the Toshiba TV for the first time, a
4-digit or 8-digit code will appear on your TV
screen. This code needs to be inputted into your
computer to authenticate the connection.
• Toshiba makes no warranties, representations, or
assurances about the content.
If authentication has already taken place
®
”Connected to Intel Wireless Display. Please
Wait” will appear on screen.
®
e
After the Intel WiDi connection is complete, the
TV screen will mirror the content shown on the PC
screen.
NOTE:
®
• When connecting Intel WiDi, PC must have power
turned on.
®
• When the Intel WiDi software is active, and the
Connection Type is set to Wireless, other applications
may not be usable.
®
• Intel WiDi device name of the TV can be changed from
®
the Intel WiDi software.
®
To exit Intel WiDi:
®
®
Exit Intel WiDi by pushing the disconnect button on Intel
WiDi software or by pressing EXIT on the TV remote
control.
NOTE: If the PC has been inactive for some time, the
®
Intel WiDi connection will be disconnected automatically.
Download from Www.Somanuals.c5om9. All Manuals Search And Download.
CONTROLS AND FEATURES
Intel® WiDi Device Name
The TV's Intel® WiDi device name can be changed.
Using the Media Player
This TV allows you to enjoy movie, music and
photo files stored on a USB device connected to
the USB port.
a
In the Network menu, press B / b to select
Network Device Setup and press OK.
Moreover, you can also play photos, movies or
music files from your PC by connecting the TV
to your home network.
b
c
d
e
Press B / b to select Intel® WiDi Setup and press
OK.
Terminology:
Press B / b to select Intel® WiDi Device Name
and press OK.
DMP: Digital Media Player
DMS: Digital Media Server
DMR: Digital Media Renderer
DMC: Digital Media Controller
Select Intel® WiDi Device Name and press OK.
The Software Keyboard window will appear.
Input the Intel® WiDi device name by using the
GREEN button.
• DMP: The TV can control and play content from a DMS.
- A DMS is a device that can function as a server for
DMP or DMR.
• DMR: The TV can play content from a DMS. Playback is
controlled by a DMC.
f
Highlight Done and press OK to save your setting.
- A DMC is a device that can instruct the TV to play
content.
Device List
NOTE:
• Do not insert/remove USB device while in use.
Device List displays a list of MAC addresses for previously
connected device that have been connected before. The
maximum number that can be stored is 20.
• MENU is not available during playback.
• When you want to use your TV as a media renderer, set
If the list run out of space, the least-recently-used MAC
address will be deleted and the new MAC address added
automatically.
Media Player Specifications
Device
a
In the Intel® WiDi Setup screen, highlight the
Device List and press OK.
USB device
Device List will appear.
Interface version: USB2.0 HS
USB Mass Storage Class devices (MSC)
The registered MAC Address can be deleted one by one
by pressing RED key in the List.
When doing so the following text can be seen “Do you
want to unregister this device? Yes/No” (default cursor is
“No”).
NOTE:
•Connectivity is not guaranteed for all devices.
•Incorrect behaviour may occur with a USB hub
connection.
File system: FAT16 and FAT32
Maximum memory size: Unlimited
You must obtain any required permission from
copyright owners to download or use
copyrighted content. TOSHIBA cannot and
does not grant such permission.
Download from Www.Somanuals.c6om0. All Manuals Search And Download.
CONTROLS AND FEATURES
To select a file in the list of contents:
Basic operation
a
b
Press BbC c to select a file or folder.
Using Media Player with USB
Press OK to move to the next layer, or press
BACK to return to the previous layer.
When you select a file, press OK to play or view.
When Auto Start is enabled, you will be asked if
you want to start the Media Player whenever a
USB device is inserted. If Auto Start is disabled
(or if you want to connect to a media server on the
network), you must manually start the Media
Player from the menu.
To move to the tab selection:
Press the BLUE button.
a
To change the Auto Start setting:
a
b
Press
and B / b to highlight Options icon.
To close the Media Player:
Press EXIT.
Press c and B / b to select Media Player setup
and press OK.
a
Using the Media Player with a media server
c
d
Press B / b to select USB Auto Start and press
OK.
You need to configure a home network before
Press C / c to select On or Off.
a
b
c
Press
and select My Music, My Videos, My
Photos or My Contents icon and press OK.
Auto Start
Press BbC c to select Device Name icon and
press OK.
a
Insert a USB device into the USB port on the left
side of the TV. A prompt will appear.
Press B / b to select a device and press OK.
b
c
Press C / c to select Yes and press OK.
List of Contents
Press B / b to select Videos, Music or Photos
and press OK.
Videos
Music
Photos
Search
Devices: CTV-5
Sort: Title
Date
d
e
Press BbC c to select Devices and press OK.
Video
23:59, Wed, 31 Dec 1969
23:59, Wed, 31 Dec 1969
23:59, Wed, 31 Dec 1969
23:59, Wed, 31 Dec 1969
Music
Press B / b to select a device and press OK.
Photos
User Files
NOTE: If Auto Start is set to Off, you can start the Media
Player manually.
Manual Start
a
Insert a USB device into the USB port on the left
side of the TV.
Videos, Music and Photos files and folders are displayed
in the list of contents.
b
Press
and select My Music, My Videos, My
To select a file in the list of contents:
Photos or My Contents icon and press OK.
Press BbC c to select Devices and press OK.
Press B / b to select a device and press OK.
a
b
Press BbC c to select a file or folder.
c
d
Press OK to move to the next layer, or press
BACK to return to the previous layer.
Files are displayed in the List View according to the
category (Videos, Music or Photos) and device you last
selected.
When you select a file, press OK to play or view.
Download from Www.Somanuals.c6om1. All Manuals Search And Download.
CONTROLS AND FEATURES
To sort files (if available):
Viewing photo files (on a media
server or USB device)
You can sort files by file name (title) or date
accordingly.
There are two types of viewing modes.
a
b
Press BbC c to highlight Sort and press OK.
Photos List (USB and Network Player Photo)
Press B / b to select File Name (Title), New or
Old and press OK.
This view allows you to search for photos in a grid format.
The pictures are displayed using thumbnail data in each
image file.
To Search for content (if available):
Videos
Music
Photos
Search
Devices: /usb/sda1
/DCIM
Sort: File Name
a
b
Press BbC c to highlight Search and press OK.
The Software Keyboard window will appear (page
44). Input keyword by using the Software
Keyboard and the search will search for:
Boulder002HD.jpg
01:00, Fri, 28 Dec 1984
Network
Videos: Title name
Music: Title name/Artist name/ Album name
Photos: Title name
The initial highlighted position will be on the top left
thumbnail in the Photos List.
USB
Videos/Music/Photos: File name.
a
Press BbC c to move the highlight in one
window.
c
Select Devices and Category and press OK.
The list of search result will appear.
or
Photos List when there are more photos than will
fit onto one screen. When the or buttons are
pressed, the highlight shall be on the photo at the
top left of Previous/Next Photos List.
buttons can be used to page up/down the
To display the Device Information or Wireless
Information:
a
b
Press QUICK to open the QUICK Menu.
NOTE: The page down function on the last page
and page up function on the first page are not
available.
Press B / b to select any of the following item.
Using with USB device: Device Information
Using with media server: Wireless Information
b
c
When you select a folder, press OK to move to the
next layer. Press BACK to move back to the
previous layer.
To close the Media Player:
Press EXIT.
a
Press OK to view the selected photo in Single
View mode.
Download from Www.Somanuals.c6om2. All Manuals Search And Download.
CONTROLS AND FEATURES
Single View (USB and Network Player Photo)
To set Background Music (USB only):
In this mode, only files located in the selected directory will
be displayed. This view allows you to change the photo
content manually. When moving from Photos List to Single
View, the currently selected photo will be displayed.
a
b
Press QUICK to open the Quick Menu.
Press B / b to select Background Music and
press c and B / b to select On.
a
b
Press c to view the next photo. Press C to view
the previous photo.
The music file in the same folder as the displayed
photo will start playing.
Press
to display file status information (file
NOTE:
number, photo title, resolution etc.).
• All the music files in the same folder as the photo will be
played repeatedly.
NOTE: The information may not be correctly displayed
depending on the contents or the devices.
• To stop music file playback, select Off in Background
Music.
Slide Show (USB and Network Player Photo)
To zoom in/out photos (USB and Network
Player Photo):
This view allows you to watch a slide show of your photos.
In this mode, only files located in the selected directory will
be played.
During the Single View mode or Slide Show mode, the
zoom function can be used.
a
To start Slide Show, press OK in the Single View
mode.
RED button (Zoom in)
x1 S x2 S x4 S x8 zoom in
GREEN button (Zoom out)
b
c
Press C / c to view the previous/next photo.
x8 S x4 S x2 S x1 zoom out
BbC c buttons: Vertical or Horizontal scrolling
Press
to display file status information.
Press OK to return to Single View.
NOTE: Using the zoom function while in the Slide Show
mode will stop the slideshow and zoom in/out the photo.
To set Interval Time and Repeat settings:
To select a photo from Play List (USB and
Network Player Photo):
a
b
Press QUICK to open the Quick Menu.
While in the Single View mode or Slide Show mode, you
can select a different photo from the Play List.
Press B / b to select either Interval Time or
Repeat.
a
b
c
Press QUICK to open the Quick Menu from
Single View mode or Slide Show mode.
c
Press c and B / b to adjust the setting and press
OK.
Press B / b to select Play List and press OK.
The Photos List will appear.
To rotate the image:
While viewing the image in Single View or Slide Show
mode, the image can be rotated 90°.
Press B / b to select a file name.
B button: Clockwise rotation
To close the Photo Viewer:
b button: Counterclockwise rotation
a
Press EXIT. The television will return to the last
viewed channel or external input.
File Compatibility
See page 89.
Download from Www.Somanuals.c6om3. All Manuals Search And Download.
CONTROLS AND FEATURES
During playback:
Viewing movie files (on a media
server or USB device)
• Press W to pause.
PAUSE may not be available depending on the contents
or media server.
You can select movies from a Videos List of available
files.
• To resume normal playback, press
c
(play).
• To play in fast reverse or fast forward directions, press
CC / cc during playback. Each time you press the CC /
cc, the playback speed will change.
Videos List (USB and Network Player Movie)
Videos
Music
Photos
Devices: /usb/sdb
Sort: File Name
• Press Z to playback from the beginning of currently
selected file. Press z to locate subsequent files.
/12334567891123456789212345678931... Date
VTS_01_1.mpg
16:40, Wed, 09 Jan 2013
/usb/sdb
• Press
to display the file status information (content
number, movie title, progress time etc.).
NOTE:
00:00:33
00:01:59
• The information may not be correctly displayed
depending on the contents or the devices.
VTS_01_1.mpg
16:40, Wed, 09 Jan 2013
• During playback, you can adjust the Picture and
Sound menu functions from the Quick Menu.
• The playback speed (CC / cc) may not change
depending on the stream.
a
Press BbC c to select a file or folder.
or
buttons can be used to page up/down the Videos
List when there are more files than will fit onto one
screen.
To select subtitle and audio languages (USB
only):
• Press SUBTITLE repeatedly to select your preferred
subtitle language.
NOTE: The page down function on the last page
and page up function on the first page are not
available.
• Press s repeatedly to select your preferred audio
language.
NOTE: This feature is not available depending on the
contents.
b
c
When you select a folder, press OK to move to the
next layer. Press BACK to move back to the
previous layer.
To set the repeat mode:
With the desired file selected, press OK or
c
a
b
Press QUICK to open the Quick Menu.
(play) to start playback.
Press B / b to select Repeat and press c and
B / b to select Off, All or 1.
NOTE:
• On preview screen, if you highlight the file
without pressing OK, the content is played on a
preview screen. When OK is pressed, it is played
in full screen mode.
Mode
Description
Off
All
The file is played back only once.
• Depending on the file size, it may take some time
to start playback.
Files in the same folder are repeatedly
played back.
d
Press v to stop playback.
1
The same file is repeatedly played back.
NOTE:
• If playback finishes before v is pressed, the screen will
return to the Videos List.
c
Press BACK.
NOTE:
• Depending on the file size, it may take some time for
playback to begin.
• The setting is effective until the TV is turned off.
• This setting is ignored in the network media renderer.
Download from Www.Somanuals.c6om4. All Manuals Search And Download.
CONTROLS AND FEATURES
®
Resume Play (USB only)
To register your TV to a DivX account:
You can resume playback from where it was last stopped.
This TV allows you to play back files purchased or rented
from DivX® Video-On Demand (VOD) services. When you
purchase or rent DivX® VOD files on the internet, you will
be asked to enter a registration code.
Press vwhile playing the movie to memorize the stopped
position.
NOTE:
a
b
In the Media Player Setup menu, press B / b to
• The memorized stopped position will be deleted in any
of the following cases.
select DivX® VOD and press OK.
- Play different content
- Exit Media Player
Press B / b to select DivX® VOD Registration
and press OK.
- Press v in the Videos List
• This function may not be available depending on the
content.
< DivX® VOD
DivX® VOD Registration
DivX® VOD Deregistration
To select a movie from Play List (USB and
Network Player Movie):
c
d
The DivX® VOD window will appear and you will
see the registration code. For details on
While playing a movie, you can select a different movie
from the Play List.
registration, please visit the DivX® website at
a
b
Press QUICK to open the Quick Menu.
Press B / b to select Play List and press OK.
The Movie List will appear.
Copy the activation file to a memory device and
play it on the TV.
c
Press B / b to select a file name.
To deregistration your device:
To close the Movie Viewer:
Press EXIT.
a
b
c
In step 2 above, select DivX® VOD
Deregistration, and then press OK.
a
A confirmation message will appear. Select Yes
and press OK.
File Compatibility
The DivX® VOD window will appear and you will
see the deregistration code. For details on
registration, please visit the DivX® website at
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that plays DivX
video. Visit divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified® to play DivX® and DivX Plus® HD (H.264/
MKV) video up to HD 1080p, including premium content.
Download from Www.Somanuals.c6om5. All Manuals Search And Download.
CONTROLS AND FEATURES
To playback DivX Plus HD content:
Playing music files (on a media
server or USB device)
• To play in fast reverse or fast forward directions, press
CC / cc during playback. Each time you press the CC /
cc, the playback speed will change.
You can listen to music from a Music List of available
files.
• This TV generates original chapter point in 10 %
increments for 10 chapters in total, that are accessible
by using the number buttons on the remote control.
Music List (USB and Network Player Music)
Videos
Music
Photos
Search
During playback, press z to skip to the beginning of the
next chapter. When z is pressed twice in succession, it
will repeat two times of above. If z is pressed at the last
chapter, the confirmation message will appear. If you
select Yes, playback will skip to the beginning of the next
content.
Devices
:
/usb/sda1
Sort: File Name
Date
xxxxxxxxxxx
xxxxxxxxxxx
xxxxxxxxxxx
08:22, Web, 31 Oct 2012
13:00, Mon, 23 Jan 2012
14:24, Tue, 01 Mar 2011
Press Z to skip to the beginning of the current chapter.
When Z is pressed twice in succession, it will skip to the
beginning of the previous chapter. If Z is pressed twice
in succession at the first chapter, stop playing the current
content and the confirmation message will appear. If you
select Yes, playback will skip to the beginning of the
previous content.
a
Press BbC c to select a file or folder.
or
buttons can be used to page up/down the Music
List when there are more files than will fit onto one
screen.
Press B to skip to the beginning of the previous file.
Press b to skip to the beginning of the next file.
The Number button is used for direct jump. If the 3 button
and OK button is pressed, playback will jump to the
beginning of 3rd chapter.
NOTE: The page down function on the last page
and page up function on the first page are not
available.
NOTE:
• Depending on the content data will not be operated.
• The playback speed (CC / cc) may not change
depending on the stream.
b
c
When you select a folder, press OK to move to the
next layer. Press BACK to move back to the
previous layer.
Using Multi Title and Alternative Timelines
Multi Title
With the desired file selected, press OK or
c
DivX Plus HD files may contain up to 100 titles.
(play) to start playback.
You can change the title (It contains same video file) by
pressing the RED button.
NOTE: If you highlight the file without pressing OK,
the content is played on a Music List. When OK is
pressed, it is played in full screen mode.
When the RED button is pressed, it will display the title
change window at the bottom on the screen (same as
Subtitle or Audio change window).
d
Press v to stop playback.
The title is changed cyclically each time the RED button is
pressed. Playback will start from start time of selected title
every B / b.
NOTE:
• Depending on the file size, it may take some time for
playback to begin.
Pressing C / c also changes the multi title.
• During playback, you can adjust the Sound menu
functions from the Quick Menu.
NOTE: Depending on the content data will not be
operated.
During playback
• Press W to pause.
PAUSE may not be available depending on the contents
or media server.
c
• To resume normal playback, press
(play).
• To play in fast reverse or fast forward directions, press
CC / cc. Each time you press CC / cc, the playback
speed will change.
• Press Z to playback from the beginning of currently
selected file. Press z to locate subsequent files.
Download from Www.Somanuals.c6om6. All Manuals Search And Download.
CONTROLS AND FEATURES
To set the repeat mode:
Other features
a
b
c
Press QUICK to open the Quick Menu.
Panel Lock
Press B / b to select Repeat.
Panel Lock disables the buttons on the television. All
buttons on the remote control can still be used.
Press C / c to select Off, All or 1.
a
b
Press
and B / b to highlight Options icon.
Mode
Description
Off
All
1
Files in the same folder are played back
once.
Press c and B / b to select Panel Lock and
press OK.
Files in the same folder are repeatedly
played back.
c
Press B / b to select On.
The same file is repeatedly played back.
< Options
Recording Setup
Media Player Setup
MHL Setup
d
Press BACK.
HDMI CEC Control Setup
NOTE:
Hybrid TV Standard
Teletext
Disabled
Auto
• The setting is effective until the TV is turned off.
• When the TV is used as a media renderer, this feature
cannot be used.
Panel Lock
Off
On
Off
AV Connection
Power Management
Blue Screen
Off
On
To select a music file from Play List (USB and
Network Player Music):
HDMI Information Display
While playing a music file, you can select a
different music file from the Play List.
When Panel Lock is On, a reminder will appear when the
buttons on the television are pressed. If the standby
button is pressed, the television will switch off and
can only be brought out of standby by using the
remote control.
a
b
Press QUICK to open the Quick Menu.
Press B / b to select Play List and press OK.
The Music List will appear.
Blue Screen
c
Press B / b to select a file name.
When Blue Screen is selected, the screen will turn blue
and the sound will be muted on analogue channels and
external input modes when no signal is received.
To display the file status information:
NOTE: Some external input sounds may not be muted.
a
Press
during playback. The information will
be displayed on the bottom of the screen.
a
b
In the Options menu, press B / b to select Blue
Screen.
b
Press
again to remove the information.
Press c and B / b to select On or Off.
NOTE: The information may not be correctly displayed
depending on the contents or the devices.
To close the Music Player:
a
Press EXIT.
File Compatibility
Download from Www.Somanuals.c6om7. All Manuals Search And Download.
CONTROLS AND FEATURES
Netflix®
The timers
To confirm the Netflix ESN (Electronic Serial
Number)
Programme Timers – digital only
This feature will set the television to go to a specific
channel at a certain time. It can be used to view a
particular programme, or by setting the mode to daily or
weekly, can be used to view a series of programmes.
a
In the Network menu, press B / bto select Smart
Apps Setup and press OK.
b
Press B / b to select ESN and press OK. Netflix
ESN screen will appear.
a
b
Press GUIDE and then press the BLUE button on
the remote control
To deactivate your TV
Press b if necessary to select an open timer
position, then press OK. The Edit Timer menu will
now appear on screen.
a
In the Network menu, press B / bto select Smart
Apps Setup and press OK.
c
Press B / b to go through the list adding the
details of the programme by using the number
buttons and C / c to make selections.
b
c
Press B / bto select Deactivation and press OK.
Press C / c to select Yes and press OK.
Edit Timer
5:51 Tue, 22 Apr
The Daily Politics
2
CABC Channel
11:48 - 11:54 Tue, 22 Apr
Timer Type
Reminder
Recording
Reminder
Set Timer
Delete Timer
d
When all of the details have been entered,
highlight Set Timer and press OK to save the
timer.
On Timer
The feature allows you to set the television to turn on
automatically to a preset channel at a certain time of day
or after a certain length of time.
a
b
Press
and B / b to highlight Timers icon.
Press c and B / b to select On Timer and press
OK.
c
Press B / b to select Enable On Timer and press
C / c to select On.
On Timer
Enable On Timer
Enable DTV Clock
Power On Time
Repeat
On
Off
00:00
Once
Input
DTV
Channel
2 CABC Channel
30
Volume
Time until Power On
00:10
Done
d
Press b to select Enable DTV Clock, and then
press C / c to select On or Off.
Download from Www.Somanuals.c6om8. All Manuals Search And Download.
CONTROLS AND FEATURES
e
Press B / b to go through the list adding the
details of the On Timer by using the number
buttons and C / c to make selections.
Energy Saving Settings
Automatic Power Down
Power On Time (only for DTV Clock On mode):
Set the time you prefer with the number buttons.
Repeat (only for DTV Clock On mode): Select the
desired On Timer operation (Once, Every Day,
Mon-Fri, Mon-Sat, Sat-Sun).
Input: Select a video input source (ATV, DTV Ant,
EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4
or PC).
The TV will automatically turn itself off (Standby) after 4
hours, if you do not operate the TV either from the remote
control or the TV control panel.
a
b
Press
and B / b to highlight Options icon.
Press cand B / b to select Power Management
and press OK.
Channel: Set the channel that will be tuned when
the television turns on.
c
d
Press B / b to select Automatic Power Down.
NOTE: When an external input is selected in the
Input field, a channel cannot be selected.
Press c and B / b to select On or Off and press
OK.
Volume: Set the volume that will be applied when
the television turns on.
Time until Power On (only for DTV Clock Off
mode): Set the amount of time from now until the
TV turns on using the number buttons (maximum
of 12 hours).
NOTE:
• This feature is set to On when Location is set to Home.
• 1 minute before switching to Standby, a Warning
message will appear.
• When the following features are set, the feature that is
set for the nearest time will function.
f
Press B / b to highlight Done and press OK.
- Automatic Power Down
- Sleep Timer
To cancel the On Timer:
- Auto shutdown after 1 hour of inactivity (after power on
by On Timer)
a
b
c
In the On Timer menu, select Enable On Timer.
Press C / c to select Off.
- No signal auto power off (after 15 minute of no signal)
Press B / b to highlight Done and press OK.
No Signal Power Down
The TV will automatically turn itself off after 15 minutes
when no signal is detected. You can change the setting to
Off for the following purposes:
Sleep Timer
The television can be set to turn itself Off after a certain
length of time.
• Low signal strength of analogue channel (no signal
detection)
a
b
Press
and B / b to highlight Timers icon.
• Only Audio L/R is connected to external input to listen to
music through the TV speakers.
Press c and B / b to highlight Sleep Timer and
press OK.
a
In the Power Management menu, press B / b to
select No Signal Power Down.
c
Use the number buttons to set the desired time.
For example, to switch the television off in one and
a half hours enter 01:30, or press c / C to
increase/decrease in steps of 10 minutes.
(Maximum time setting is 12 hours)
b
Press c and B / b to select the item you want to
change and press C / c to select On or Off.
NOTE:
• Default setting is all On.
d
e
Press EXIT to finish.
• A warning message will appear 1 minute before turning
off.
To cancel the Sleep Timer, enter all zeros for the
above setting.
Download from Www.Somanuals.c6om9. All Manuals Search And Download.
CONTROLS AND FEATURES
To display More Information:
Digital on-screen information
a
b
Press QUICK to open the Quick Menu.
When viewing in digital mode, the on-screen
information and programme guide provide
access to programme details for all available
channels.
Press b to highlight More Information and press
OK.
On-screen Information icons
Information
Icon
Description
Service info
Service type
(TV, Radio, Text)
a
Press
, the information screen will appear
giving details of the channel and programme
currently being viewed.
Skip
Display Example
Audio info
Mono
4
CHANNEL Z
6:00 Thu, 11 Oct
Stereo
REC
D+
4
Dual mono
Multichannel
Dolby Digital
Dolby Digital+
English
D
+
D
When HE-AAC is
decoded
Now
MLB Young’s two-run triple leads AL over NL 6:00- 8:00
AD
Audio Description
AD 18
HD 16:9
News
15 min left
8:00- 9:00
Audio/Subtitle
info
For Hard of Hearing
Next
Also
World News and Sports
Recording info
●REC
HD, SD
16:9, 4:3
Recording + Service
info
MLB Young’s two-run triple leads AL over NL
Change
Event info
Video format (HD,
SD)
b
c
Press B / b to select the “Now”, “Next” or “Also”
Video Aspect
Teletext
information guide.
The selected information content will appear.
Subtitle (Single,
Multi)
To record the next scheduled programme, select
Next and press OK. The Edit Timer screen will
appear.
Audio track
(Mono, Multi)
0, 4 – 18
Parental rating
Encrypted
Edit Timer
10:50 Tue, 26 Apr
Timer info
Recording
Reminder
The Daily Politics
2
CABC Channel
11:30 - 12:30 Tue, 26 Apr
Timer Type
Recording
Set Timer
Delete Timer
d
The details of the programme will already have
been added to the timer. Highlight Set Timer and
press OK to save.
To indicate that a Recording Timer has been set, a
clock icon will be displayed in the Next fields of the
information screen. A check mark will appear if the
timer is a Reminder Timer.
Download from Www.Somanuals.c7om0. All Manuals Search And Download.
CONTROLS AND FEATURES
Using EPG (Electronic
Programme Guide)
Genre selection/searching
From the Guide screen, you can use the genre selection
and search features.
a
b
In the Guide screen, press QUICK.
Using Broadcast Guide
Press B / b to highlight Genre Colour in the
Quick Menu and press OK.
a
Select the on-screen Guide by pressing GUIDE,
and the Guide screen will appear highlighting
details of the channel and programme currently
being viewed. This may take a few moments to
appear.
Genre Colour
Movie
5:48 Tue, 22 Apr
Tue 22
TV
6:00
6:30
7:00
7:30
8:00
1
2
3
4
5
6
7
8
9
ABC HDTV
ABC1
World Business Today
Big Brotherʼs Little Brother
45
ITV Morning News
World Business...
Hope & Faith
Colour Setup
Seven Wonders of Anclent Rome
ITV Morning News
Battlefield Detectives
ABC2
ABC1
Balairiory
ITV Morning... Seven Wonders of Anclent Rome
c
With the focus on a particular genre, press the
desired coloured button to assign. Four colours will
be available to set. Press BACK to go back to the
Guide screen.
ABC3
Seven Wonders of Anclent Rome
BBC News 24
Hope & Faith
BBC News 24
Zoo Story
Hope & Faith
BBC ONE
BBC TWO
BBC THREE
BBC NEWS 24
BBC News 24
Animal Cops...
World News Today
vets in Hong Kong
Kickstart Natural Born Dealers
World News Today
Go, Diego, Go!
Hope & Faith
Big Brother Live
Go, Diego, Go! vets in Hong Kong
10 BBCi
vets in Hong Kong
45 vets in Hong Kong epsode 12
Worldʼs Toughest
11 CBBC Channel Worldʼs Toughest
Worldʼs Toughest
12 TF1 HD
Zoo Story
Firnbles
Zoo Story
Zoo Story
13 FRANCE 2 HD
Good Morning Sports Fan
Animal Cops Houston
More Info
Page Up/Down
Now
View
Genre
Timers
Watch TV
You can switch the time scale to 1.5 or 3 hours by
pressing the GREEN button.
b
c
Press C / c for information on other programmes
scheduled for the channel selected. To highlight
the first programme in the genre grid, press the
RED button.
For details of other programmes currently
available, press B / b to scroll up and down the
channel list. As channels are selected, details of
the programme currently being broadcast will
appear. Press C / c to view information for future
programmes.
d
e
For information on a highlighted programme, press
.
To set the timer for that programme, press the
BLUE button to bring up the Programme Timers
menu.
f
Press
to view another page.
Updating EPG:
a
b
In the Guide screen press QUICK.
Press B / b to select EPG Update.
Download from Www.Somanuals.c7om1. All Manuals Search And Download.
CONTROLS AND FEATURES
Digital settings – parental
control
Parental Setup
The Parental Control feature allows you to block
programmes according to their rating levels. If a PIN has
been set, you will need to enter it before adjusting the
level.
In order to prevent viewing of unsuitable films
and programmes, channels and menus can be
locked in digital mode. These can then only be
accessed with a security code PIN.
a
b
In the DTV Settings menu, press B / b to select
Parental Control and press OK.
Press B / bto select Parental Setup or Playback
Setup and press OK.
Parental PIN Setup
a
b
c
Press
icon.
and B / b to highlight Installation
Parental Setup: Select when you want to set
viewing restrictions on broadcast programmes.
Press c and B / b to select DTV Settings and
press OK.
Playback Setup: Select when you want to set
viewing restrictions on playback of programmes
recorded to the USB HDD.
Press B / b to select Parental PIN Setup and
press OK.
c
Press B / b to select an option.
< DTV Settings
< Parental Control
Channels
Parental Setup
Playback Setup
None
None
4
Subtitle and Audio
Parental PIN Setup
Parental Control
Local Time Setting
Enabled
5
6
7
Standby Channel Update
Dynamic Scan
Off
Off
8
9
Favourite Region
Common Interface
10
11
12
13
14
d
Using the number buttons enter a four digit
number. Once entered you will be prompted to
confirm by entering again.
To view blocked programmes, enter the PIN. To
reactivate the Parental Control, turn the TV off and
then on again.
Parental PIN Setup
New PIN:
Confirm PIN:
The PIN number is now set.
If the PIN code has been set, when Auto Tuning
and Reset TV are executed, entering the PIN will
be necessary. “0000” is not acceptable.
Download from Www.Somanuals.c7om2. All Manuals Search And Download.
CONTROLS AND FEATURES
Digital settings – Channel
Options
Favourite Channel List
a
b
Press LIST to display Channel List.
Each time you press C / c, All Channels, TV
Channels, Radio channels, Text channels or
Favourites is selected in order.
Selecting favourite channels
From the Quick Menu / Channel Options menu, it is
possible to create a list of the digital channels that are
watched most. Press LIST / C c to select the Favourite
Channel list.
Press C / c to select Favourites. The number of
favourites available depends on how many lists
have been created.
a
Select the channel you want to add to your
favourite list.
Channel List
Favourite
6
M6
b
c
Press QUICK to open the Quick Menu.
9
W9
11
31
34
51
NT1
Press b to select Channel Options and press
OK.
PARIS PREMIERE
AB1
ITV1
d
e
Press c to highlight the favourite (✩) box.
Press OK to select the ones required. A tick will
appear in the box as they are selected.
c
Press B / b to highlight a channel and press OK
to watch.
f
g
Repeat steps 1 through 5 for other channels.
Skip channels
When all favourites have been selected, press
EXIT.
This feature allows you to set channels that will be skipped
when Pu or PU are used to tune.
a
b
Select the channel you want to skip in your
channel list.
In the Quick Menu, press b to select Channel
Options and press OK.
c
d
e
f
Press c repeatedly to highlight the skip (8) box.
Press OK to select. A tick will appear in the box.
Repeat steps 1 through 4 for other channels.
Press EXIT.
NOTE: Skipped channels cannot be selected by
Pu or PU but still be accessed by direct number
entry (when tuned a 8 icon will be displayed in
the banner to indicate as a skipped channel).
Download from Www.Somanuals.c7om3. All Manuals Search And Download.
CONTROLS AND FEATURES
Digital settings – other settings
Locking channels
Locking Channels stops the viewing of digital channels,
and they can only be accessed by entering the PIN.
Subtitles
a
b
Select the channel you want to lock in your
channel list.
In DTV mode, this feature will show subtitles on the screen
in the selected language provided they are being
broadcast.
In the Quick Menu, press b to select Channel
Options and press OK.
a
b
In the DTV Settings menu, press B / b to select
Subtitle and Audio and press OK.
c
d
Press c repeatedly to highlight the lock ( ) box.
Press b to select Subtitle Display and press c
and B / b to select On or Off.
Press OK to select. A tick will appear in the box.
< Subtitle and Audio
If a PIN has already been set, PIN entry will be
required to set the locked channels.
Subtitle Display
Off
Normal
English
English
Normal
English
English
Subtitle Type
Primary Subtitle Language
Secondary Subtitle Language
Audio Type
e
f
g
Repeat steps 1 through 4 for other channels.
Primary Audio Language
Secondary Audio Language
Press EXIT.
From this point on, when any of the channels in the
Locked Channel list are selected, the PIN must
be entered before they can be accessed.
c
Press B / bto select Primary Subtitle Language
or Secondary Subtitle Language and press c
and B / b to select an option.
The SUBTITLE button can be used to select subtitle on or
off for the current channel only and to select the subtitle
language if more than one subtitle is available.
Audio languages
This feature allows a programme or film to be viewed with
a choice of soundtrack language, provided multiple
language tracks are being broadcast.
a
In the Subtitle and Audio menu, press B / b to
select Audio Type and press c and B / b to
select Normal, For Hard of Hearing or Audio
Description and press OK.
b
Press B / b to select Primary Audio Language
or Secondary Audio Language and press c and
B / b to select an option.
If more than one soundtrack is available, use the
s button to select between them.
Download from Www.Somanuals.c7om4. All Manuals Search And Download.
CONTROLS AND FEATURES
Software Upgrade and
Licences
Common Interface
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from a
service provider and allow additional subscription
broadcasts to be viewed. For information, see a service
provider.
Searching for New Software
If preferred, software upgrades can be searched for
manually using Search for New Software.
a
Insert the CAM and card into the Common
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM has been inserted.
a
In the Get Help menu, press B / b to select
Software Upgrade and press OK.
b
c
Press B / b to select Over-the-air-Upgrade and
press OK.
b
c
d
Press
icon.
and B / b to highlight Installation
Press c and B / b to select Search for New
Software and press OK. The television will
automatically start searching for a software
upgrade, the progress bar will move along the line.
Press c and B / b to select DTV Settings and
press OK.
Press B / b to select Common Interface and
press OK.
SEARCH FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
48 %...
CH 31
e
Details of the CAM should now be available.
If an upgrade is found, the television will
automatically start downloading. If not, a screen
will appear stating that an upgrade is unavailable.
NOTE:
• Software update of a CI Plus CAM may execute
automatically if it is instigated by the broadcaster. This
could cause the cancellation of any Reminders/
Recordings during this process.
NOTE: When Auto Upgrade is set to On, this feature is
not available.
• Some CI or CI+ CAM may not be supported.
• CI+ operation is not guaranteed except for Canal Ready
DTT services on suffix FC models.
Network Upgrade
TOSHIBA may offer upgrades for the TV’s software in the
future. The TV’s software is upgraded via the Network.
Before downloading software:
Configure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you will not
be able to watch the TV.
a
b
In the Get Help menu, press B / b to select
Software Upgrade and press OK.
Press B / b to select Network Upgrade and press
OK.
NOTE: If the network is not available, a warning
message will appear.
c
The TV software upgrade will start when download
succeeds.
Download from Www.Somanuals.c7om5. All Manuals Search And Download.
CONTROLS AND FEATURES
System Information and Reset
TV
Software Licences
The licences for the software used in this television are
available for viewing.
a
In the Get Help menu, press B / b to select
Software Licences and press OK.
System Information
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc.
A screen will appear displaying all the licensing
information required for the televisions software.
a
b
In the Get Help menu, press B / b to select
System Information.
Press OK to display the System Information.
System Information
TOSHIBA
2013
Jan 19 2013
Software Version : xxxxxxxx
MBOOT Version : xxxxxxxx
AVERAGE
CH 25
CH 33
CH 67
GOOD
GOOD
GOOD
WEAK
WEAK
WEAK
STRONG
STRONG
STRONG
AVERAGE
AVERAGE
c
d
For information about the signal quality of a
particular multiplex, press B / b to select that
multiplex.
Press OK for a screen showing detailed technical
information about the selected multiplex.
Reset TV
Selecting Reset TV will reset all TV settings, including
saved channels, to their original factory values.
a
In the Installation menu, press B / b to select
Reset TV.
b
Press OK to select. A screen will appear warning
that all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup
and perform an auto tune. (See “Quick Setup”
Download from Www.Somanuals.c7om6. All Manuals Search And Download.
CONTROLS AND FEATURES
PC Settings
Sampling Clock
Adjusting the Sampling Clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
Horizontal and Vertical Position
a
In the Display Settings menu, press B / b to
select PC Settings and press OK.
Connect the PC (as shown in the ‘Connecting a computer’
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.
b
c
Press B / b to select Sampling Clock.
a
b
Press
and B / b to highlight Setup icon.
Press C / c to adjust until the picture clears.
Press cand B / bto select Display Settings and
press OK.
Reset
Use Reset to return all items to the original factory
settings.
c
Press B / b to select PC Setting and press OK.
< Display Settings
a
b
In the Display Settings menu, press B / b to
select PC Settings and press OK.
Auto Format
4:3 Stretch
On
Off
Picture Position
PC Settings
Press B / b to select Reset and press OK.
NOTE: When a PC is connected using HDMI, none of
these functions will be available.
d
Press B / b to select an option and press C / c to
adjust the settings.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
< PC Settings
The default settings and adjustment ranges may vary
depending on the input signal format.
Horizontal Position
Vertical Position
Clock Phase
0
0
0
0
Sampling Clock
Reset
Clock Phase
The Clock Phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
a
In the Display Settings menu, press B / b to
select PC Settings and press OK.
b
c
Press B / b to select Clock Phase.
Press C / c to adjust until the picture clears and
press OK.
Download from Www.Somanuals.c7om7. All Manuals Search And Download.
CONTROLS AND FEATURES
Input selection and AV
connections
Labelling video input sources
These input labels are shown in the input selector. You
can label video inputs according to the devices you have
connected to the TV.
recommended connections.
a
b
Press
and B / b to highlight Options icon.
Most media recorders and decoders send a signal through
the SCART lead to switch the television to the correct
Input socket.
Press B / b to select AV Connection and press
OK.
Alternatively, press the external source selection button
o until the picture from connected equipment is shown.
< Options
Recording Setup
Media Player Setup
MHL Setup
Input selection
HDMI CEC Control Setup
Use the Input Selection window if the television does not
switch over automatically.
Hybrid TV Standard
Teletext
Disabled
Auto
Panel Lock
Off
AV Connection
Power Management
Blue Screen
a
By pressing o on the remote control or TV, a list
will appear on screen showing all inputs and
external equipment.
Off
On
HDMI Information Display
Press o on the remote control
Inputs
c
Press b to highlight Input Labelling and press
OK.
TV
1
2
< AV Connection
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
Input Labelling
Colour System
Press and hold p / o on the TV
Inputs
DTV Ant TV
1
2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
d
Press B / b to select the item you want to label,
and then press C / c to select --, Amplifier,
Cable, DVD, Game, PC, Recorder or Satellite.
ATV
Input Labelling
Input
Label
EXT 1
EXT 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
--
--
HDMI® displays equipment connected to Input
HDMI on the back or side of the television.
--
DVD
--
PC displays a computer connected to Input RGB/
PC on the back of the television.
--
--
e
Repeat step 4 for other video inputs.
Download from Www.Somanuals.c7om8. All Manuals Search And Download.
CONTROLS AND FEATURES
• Depending on the connected equipment
(amplifier, etc.), adjustment may not be possible.
Digital Audio Output
• When the optical digital output setting
(AutotPCM) is changed, it may be necessary
to adjust the timing again.
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format [S/
PDIF]), the following options can be selected or adjusted.
• Do not use other than for audio output from the
AV amplifier, etc. (Malfunction may occur)
a
In the Sound menu, press B / b to select Digital
Audio Output and press OK.
< Sound
Balance
0
0
0
Bass
Treble
Advanced Sound Settings
Stable Sound
Dynamic Range Control
Dual
On
Dual 1
Audio Level Offset
TV Speakers
On
Headphone Level
Audio Description
Digital Audio Output
b
Press B / b to select an option.
Audio Format
Press C / c to select PCM or Auto.
PCM: This mode outputs PCM format to the digital
audio output socket.
Auto: This mode outputs Dolby Digital (if
available) or PCM to the digital audio output
socket.
Dolby Digital S Dolby Digital
Dolby Digital Plus S Dolby Digital
MPEG S PCM
HE-AAC S Dolby Digital
Audio Delay
Press C / c to select Auto or Manual.
Auto: This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large
between the image and sound depending
on the connected equipment (amplifier
etc.). In that case, select Manual.
Manual:You can manually adjust the audio signal
timing to meet the video signal timing.
Delay Adjustment
Press C / c to adjust the audio signal timing
(0 – 250 ms) to meet the video signal timing.
NOTE:
• This feature is greyed out when Audio Delay is
in Auto.
• A time lag will occur when the video signal or
audio signal is changed. Adjust the timing
accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may
occur when the signal is changed.
Download from Www.Somanuals.c7om9. All Manuals Search And Download.
CONTROLS AND FEATURES
Using HDMI CEC Control
Amplifier Control
When Amplifier Control is set to on/off the connected
HDMI CEC Control amplifier.
This is a new feature that uses CEC technology
and allows you to control Toshiba HDMI CEC
Control compatible devices from the television
a
In the HDMI CEC Control Setup menu, press b
to select Amplifier Control.
When the Enable HDMI CEC Control item in the HDMI
CEC Control Setup menu is set to On, individual
functions also set to On will be activated.
b
Press c and B / b to select On or Off.
Initial Speaker Setting
Enable HDMI CEC Control
The Initial Speaker Setting allows to select TV speakers or
Amplifier speakers.
a
b
Press
and B / b to highlight Options icon.
a
b
In the HDMI CEC Control Setup menu, press b
to select Initial Speaker Setting.
Press c and B / b to select HDMI CEC Control
Setup and pres OK.
Press c and B / b to select TV Speakers or
Amplifier.
c
Press b to select Enable HDMI CEC Control and
press C / c to select On.
< HDMI CEC Control Setup
HDMI CEC Control input source
selection
On
Off
Enable HDMI CEC Control
TV Auto Power
On
On
On
Auto Standby
If an HDMI CEC Control device with HDMI switching
capability (e.g. AV amplifier) is connected to the HDMI
input, you can select another HDMI CEC Control device
that is connected to the master HDMI device on the input
source list.
Amplifier Control
Initial Speaker Setting
On
TV Speakers
a
b
c
Press o and a list will appear on screen showing
available input sources.
Press b to select the input source that the HDMI
CEC Control devices are connected.
NOTE: If you set Enable HDMI CEC Control to
Off, all other items will be greyed out.
Press cand a second selection screen will appear
showing all connected HDMI CEC Control
equipment.
TV Auto Power
The TV Auto Power setting allows the television to be
automatically switched on if an HDMI CEC Control device
is turned on.
Inputs
TV
a
b
In the HDMI CEC Control Setup menu, press b
to highlight TV Auto Power.
1
2
HDMI 1
HDMI 2
Press c and B / b to select On or Off.
HDMI 3
HDMI 4
PC
1
2
3
4
5
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
Auto Standby
When Auto Standby is enabled, the television, when
switched off, will automatically switch off (Standby) all
connected HDMI CEC Control equipment.
d
Press B / b to select the desired input source,
and then press OK.
a
In the HDMI CEC Control Setup menu, press b
to highlight Auto Standby.
NOTE:
• These functions depend on the device connected.
If you select the HDMI CEC Control input source from
the popup window, some HDMI CEC Control devices
may automatically turn on.
b
Press c and B / b to select On or Off.
Download from Www.Somanuals.c8om0. All Manuals Search And Download.
CONTROLS AND FEATURES
• If the HDMI cable from connected equipment is
changed, Enable in the HDMI CEC Control Setup menu
may need to be reset to On.
Using MHL TV function
You can use the following functions by connecting
between the TV HDMI 3 port and a USB port of mobile
phones etc. with an MHL cable.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the Enable HDMI
CEC Control item on the HDMI CEC Control Setup
menu from Off to On.
• Charge mobile phone from TV
• Two-way remote operation between TV and mobile
phone
HDMI CEC Control one touch play
• Video/Audio output from mobile phone
When connected equipment is switched on, HDMI CEC
Control will automatically detect the television through the
input selection. If the television is in Standby, it will be
switched on automatically.
NOTE: These functions may not be available depending
on the connected device.
Connecting an MHL-compatible
device
These functions can be enabled or disabled from the
NOTE:
Connect the device to the HDMI 3 port on the TV with an
MHL cable (not supplied).
• Even if the equipment is showing a menu, the television
may automatically show the input source.
• This feature depends on the connected equipment and
television state.
HDMI 3
HDMI CEC Control system standby
If the television is turned off (Standby), the television will
send a message to turn off (Standby) all of the HDMI CEC
Control devices connected to the television.
MHL cable
(not supplied)
• When you connect an MHL-compatible device to the
HDMI 3 port on the TV with the MHL cable, charging
starts automatically.
These functions can be enabled or disabled from the
NOTE: This feature depends on the connected equipment
and television state.
NOTE: Do not connect an MHL-compatible device to any
port other than the HDMI 3 port.
Operating an MHL-compatible
device
When an MHL-compatible device is connected to the
HDMI 3 port on the TV, input automatically switches to the
HDMI 3 port.
Operate the device using the remote controller for the TV.
To display photos, select the photos using BbC c and
press OK. To play a video, press c (play).
Depending on the connected MHL-compatible device, it
may be possible to perform operations from the device.
MHL Setup
Select whether or not input automatically switches to the
HDMI 3 port when an MHL-compatible device is
connected.
a
b
c
In the Options menu, press B / b to select MHL
Setup.
Press c and B / b to select TV Auto Input
Switch.
Press C / c to select On or Off and press OK.
Download from Www.Somanuals.c8om1. All Manuals Search And Download.
TEXT SERVICES
Text services
Navigating pages using Auto
If Fastext is available, four coloured titles will appear at
the base of the screen.
This television has a multi-page text memory,
which takes a few moments to load. It offers two
Modes of viewing text – Auto will display
Fastext, if available. List will save your four
favourite pages.
To access one of the four given subjects, press the
relevant coloured button on the remote control.
For further information on your particular text system(s),
see the broadcast text index page or consult your local
Toshiba dealer.
Selecting modes
The text character set will be automatically chosen by the
Navigating pages using LIST
language setting in the Options menu.
The four coloured choices at the bottom of the screen are
numbers – 100, 101, 102 and 103, which have been
programmed into the television’s memory. To view these
pages, press the relevant coloured buttons.
a
b
Press
and B / b to highlight Options icon.
Press c and B / b to select Teletext, and then
press C / c to select Auto or List.
To change these saved pages, press the relevant
coloured button and enter the 3-digit number. This number
will change in the top left of the screen and in the coloured
highlight.
< Options
Recording Setup
Media Player Setup
MHL Setup
Press OK to save. Whenever OK is pressed, all four
page numbers showing at the bottom will be saved
and the previous ones will be lost.
HDMI CEC Control Setup
Hybrid TV Standard
Teletext
Disabled
Auto
Auto
List
NOTE: The video signal from the external inputs (EXT-1
and EXT-2) is not saved.
Panel Lock
Off
AV Connection
Power Management
Blue Screen
If OK is not pressed, the selection will be forgotten when
the channel is changed.
Off
On
HDMI Information Display
Other pages may be viewed by entering the 3-digit page
number – but DO NOT press OK or these pages will be
saved.
Text information
The TEXT button
To view text services press TEXT. Press again to
superimpose the text over a normal broadcast picture and
again to return to normal viewing. Channels cannot be
changed until text is cancelled.
The first text page shown will be the initial page.
Any text page can be accessed by entering the 3-digit
page number using the numbered buttons, pressing the
coloured buttons or pressing PU to advance to the next
page and Pu to go back to the previous page.
Sub-pages
The pages on the screen will dynamically update as sub-
pages are received.
If you open a page containing sub-pages, the sub-pages
are automatically displayed in sequence. To quit
automatic sub-page change, press C / c.
Once selected, the sub-page you are viewing will be
highlighted and, as the television loads any additional sub-
pages, the colour of the numbers will change, indicating
that these pages have been loaded.
These sub-pages will remain available to view until
another page is chosen or, in normal TV mode, the
channel is changed.
Download from Www.Somanuals.c8om2. All Manuals Search And Download.
TEXT SERVICES
Control buttons
Below is a guide to the functions of the remote control text
buttons.
k To display the index/initial page:
Press k to access the index/initial page. The one
displayed is dependant on the broadcaster.
TEXT To display a page of text:
Press TEXT to display text. Press again to superimpose
text over a normal picture. Press again to return to normal
television viewing. Channels cannot be changed until this
has been done.
A To reveal concealed text:
To discover the solutions on quiz and joke pages press the
A button.
B To hold a wanted page:
At times it is convenient to hold a page of text. Press B
and B will appear in the top left of the screen. The page
will be held on screen until the button is pressed again.
C To enlarge the text display size:
Press C once to enlarge the top half of the page, press
again to enlarge the bottom half of the page. Press again
to revert to normal size.
D To temporarily erase the text screen:
Press D once to erase the text screen temporarily.
To recall the text screen, press the button again.
To display news flashes:
Select the news flash page for the chosen text service
(see the index page of text service). The news flashes will
be displayed as and when they are broadcast.
Remember to cancel text before
changing channels - press the TEXT
button twice.
Download from Www.Somanuals.c8om3. All Manuals Search And Download.
PROBLEM SOLVING
Questions and Answers
Below are the answers to some of the most common queries.
Question
Answer
Why is there no sound or picture?
Check the television is not in Standby mode. Check the mains plug and
all mains connections.
Why is there a picture but no sound?
Check all lead connections.
No sound or unacceptable format sound may be received.
Check the volume has not been turned down or that sound mute has
not been selected.
Check shared audio settings.
Why is the soundtrack in English
when a different audio language has
been selected?
The programme is currently being broadcast with an English
soundtrack only.
Why is there incorrect or no sound
when in DTV mode?
Press s to ensure the hard of hearing option has not been selected.
There is a picture, but why is there
little or no colour?
When using an external source, for instance, a poor quality video tape,
if there is little or no colour, improvements may sometimes be achieved.
The colour is factory set to Auto to automatically display the best colour
system.
To check that you have the best colour:
a
With the external source playing, select Colour System from
the Options menu.
< AV Connection
Input Labelling
Colour System
Auto
PAL
SECAM
NTSC 4.43
NTSC 3.58
b
With C / cchoose between Auto, PAL, SECAM, NTSC 4.43 or
NTSC 3.58.
What else can cause a poor picture?
Interference or a weak signal. Try a different television station. Manual
Fine Tuning may help.
a
b
Select the ATV Manual Tuning menu. Highlight the station and
press OK. Then press c to select Manual Fine Tuning.
Using B / b adjust to get the best picture and sound. Press OK
and then press EXIT.
ATV Manual Tuning
Manual Fine Tuning
1
I
A
C
2
0
Why doesn’t the video/DVD being
played show on screen?
Make sure the media recorder or DVD player is connected to the
pressing o.
Why are there vertical stripes on the
screen when in PC mode?
The Sampling Clock may need adjustment. Select PC Settings from
the Display Settings menu, highlight Sampling Clock and adjust until
the lines clear.
Download from Www.Somanuals.c8om4. All Manuals Search And Download.
PROBLEM SOLVING
Question
Answer
Why are there horizontal stripes and/
or blurred images on the screen when
in PC mode?
The Clock Phase may need adjustment. Select PC Settings from the
Display Settings menu, highlight Clock Phase and adjust until the
picture clears.
Why are the colours wrong when an
NTSC source is played?
Connect the source via a SCART lead and play.
Select Colour System from the Options menu.
a
b
Set the Colour to Auto and exit.
Go to the Picture menu and adjust the tint.
Why don’t the controls of the
television work?
Check that Panel Lock is not On.
Why doesn’t the remote control
work?
Check that batteries aren't exhausted or inserted incorrectly.
Why is the digital channel locked?
– Channel Options’ section).
Why are some of the digital
subscription channels unavailable?
Your subscription needs upgrading. Contact your service provider.
What is DVB-T?
What is DVB-C?
Digital Video Broadcast via an aerial/antenna.
Digital Video Broadcast via a cable connection.
Select from All Channel List (LIST button).
How are DTV radio channels
selected?
What can be done if the PIN number
has been forgotten?
Use the Master PIN code of 1276, then change to a number of your
choice. Select Parental PIN Setup from the DTV Settings menu to
enter PIN. Ensure that no-one else can use the Master PIN by removing
the Owner’s Manual.
Why when digital subtitles have been
selected are they not showing on
screen?
Subtitles are not currently being transmitted by the broadcaster.
Why are there problems with
analogue text?
Good performance of text depends on a good strong broadcast signal.
This normally requires a roof or loft aerial. If the text is unreadable or
garbled, check the aerial. Go to the main index page of the text service
and look for the User Guide. This will explain the basic operation of text
in some detail. If further information is needed on how to use text see
the text section.
Why is a page number visible at the
top of the screen but no text?
Text has been selected but Teletext information is currently unavailable
on the current source.
Why don’t the devices connected via
HDMI operate properly?
Make sure to use cables with the HDMI logo
Some early HDMI equipment may not work properly with the latest
HDMI TV products, due to new standard adoption.
Why don’t the devices connected via
MHL operate properly?
Turn off your TV and unplug the power cord, and then plug and turn on
again.
Turn the MHL Source Power Off and On again.
Try to reconnect a MHL cable.
Why don’t the HDMI CEC Control
devices work?
When the connected HDMI CEC Control device does not work correctly
after you have changed the settings of the device, turn off your
television and unplug the power cord, and then plug and turn on again.
Unplug the HDMI cable of the HDMI CEC Control device and lead
again.
Why is the HDMI CEC logo still
showing when the equipment has
been disconnected?
If the HDMI CEC Control device is disconnected, the logo will disappear
after approximately one minute.
Download from Www.Somanuals.c8om5. All Manuals Search And Download.
PROBLEM SOLVING
Question
Answer
Why don’t the networked devices
work?
The LAN cables are not connected properly or at all. Connect all cables
Why doesn’t the wireless network
work?
Check that the AP is powered on.
Why doesn’t the Media Player feature
operate?
Make sure that devices are connected correctly.
Incorrect behaviour may occur with a USB Hub connection.
Check your network setup if using a network media server.
Why doesn’t the USB HDD work?
Why isn't Skype launched?
Your country/area may not support the USB HDD function.
the TV.
Check the Network setting of TV.
Turn off the TV and unplug the power cord. After 1 minute, plug the
power cord in and turn on the TV.
Why can't the Skype account be
signed in?
If you have no Skype Name, create a Skype Name in Create an
account.
What do the LEDs on the front of the
television indicate?
Check the table below.
LED indication
Green
Condition
Power ON
Red
Power OFF
(Standby or Active Standby)
Remote
sensor
Power LED
On = Green
Standby = Red
Other problems
If your TV’s problem is not addressed in this Questions and Answers section or the recommended solution has not
worked, do one of the following:
1
2
3
Turn off your TV. After 30 seconds, turn it on.
Turn off the TV and unplug the power cord. After 1 minute, plug the power cord in and turn on the TV.
Perform the Reset TV function in the Installation menu.
Download from Www.Somanuals.c8om6. All Manuals Search And Download.
INFORMATION
Information
Before connecting any external equipment, turn off all main power switches. If there is no
switch, remove the mains plug from the wall socket.
Signal information for Mini D-sub 15 pin connector
Pin No.
Signal name
Pin No.
Signal name
Ground
Ground
Ground
+5V
Pin No.
11
Signal name
NC
1
2
3
4
5
R
G
6
7
12
DDC Data
H-sync
B
8
13
NC*
Ground
9
14
V-sync
10
Ground
15
DDC Clock
* NC = not connected
Acceptable PC signals through the PC terminal
The PC input on this TV only accepts signal formats which are compliant with VESA-DMT as shown
in the table below. Since some PCs input signals which are different from the resolution and
frequency described in the table below, the following phenomenon may occur; incorrect display,
false format detection, picture position failure, blur, or judder. In this case, set the monitor output
format on your PC to conform to a signal in the table below.
VESA Standard
Format
Resolution
V. Frequency
H. Frequency
Pixel Clock Frequency
(DMT)
VGA
640 × 480
59.940 Hz
72.809 Hz
75.000 Hz
56.250 Hz
60.317 Hz
72.188 Hz
75.000 Hz
60.004 Hz
70.069 Hz
75.029 Hz
59.995 Hz
59.870 Hz
74.893 Hz
59.810 Hz
60.015 Hz
59.887 Hz
60.020 Hz
75.025 Hz
60.000 Hz
31.469 kHz
37.861 kHz
37.500 kHz
35.156 kHz
37.879 kHz
48.077 kHz
46.875 kHz
48.363 kHz
56.476 kHz
60.023 kHz
47.396 kHz
47.776 kHz
60.289 kHz
49.702 kHz
47.712 kHz
55.935 kHz
63.981 kHz
79.976 kHz
67.500 kHz
25.175 MHz
31.500 MHz
31.500 MHz
36.000 MHz
40.000 MHz
50.000 MHz
49.500 MHz
65.000 MHz
75.000 MHz
78.750 MHz
68.250 MHz
79.500 MHz
102.250 MHz
83.500 MHz
85.500 MHz
106.500 MHz
108.000 MHz
135.000 MHz
148.500 MHz
SVGA
800 × 600
XGA
1024 × 768
1280 × 768
WXGA
1280 × 800
1360 × 768
1440 × 900
1280 × 1024
WXGA+
SXGA
1080p
1920 × 1080p
Download from Www.Somanuals.c8om7. All Manuals Search And Download.
INFORMATION
Acceptable video or PC signals through the HDMI terminals
The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which
are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices
input signals which are different from the resolution and frequency described in the table below, the
following phenomenon may occur; incorrect display, false format detection, picture position failure,
blur, or judder.
In this case, set the monitor output format on your PC, HDMI or DVI device to conform to a signal in
the table below.
Pixel Clock
Frequency
VESA
Standard
Format
Resolution
V. Frequency
H. Frequency
480i
576i
720 × 480i
720 × 576i
59.940/60.000 Hz
50.000 Hz
15.734/15.750 kHz
15.625 kHz
27.000/27.027 MHz
27.000 MHz
480p
576p
1080i
1080i
720p
720p
1080p
1080p
1080p
1080p
1080p
VGA
720 × 480p
59.940/60.000 Hz
50.000 Hz
31.469/31.500 kHz
31.250 kHz
27.000/27.027 MHz
27.000 MHz
720 × 576p
1920 × 1080i
1920 × 1080i
1280 × 720p
1280 × 720p
1920 × 1080p
1920 × 1080p
1920 × 1080p
1920 × 1080p
1920 × 1080p
640 × 480
59.940/60.000 Hz
50.000 Hz
33.716/33.750 kHz
28.125 kHz
74.176/74.250 MHz
74.250 MHz
59.940/60.000 Hz
50.000 Hz
44.955/45.000 kHz
37.500 kHz
74.176/74.250 MHz
74.250 MHz
59.940/60.000 Hz
50.000 Hz
67.433/67.500 kHz
56.250 kHz
148.352/148.500 MHz
148.500 MHz
74.250 MHz
24.000 Hz
27.000 kHz
29.970/30.000 Hz
25.000 Hz
33.720/33.750 kHz
28.130 kHz
74.176/74.250 MHz
74.250 MHz
59.940/60.000 Hz
72.809 Hz
31.469/31.500 kHz
37.861 kHz
25.175/25.200 MHz
31.500 MHz
75.000 Hz
37.500 kHz
31.500 MHz
SVGA
800 × 600
56.250 Hz
35.156 kHz
36.000 MHz
60.317 Hz
37.879 kHz
40.000 MHz
72.188 Hz
48.077 kHz
50.000 MHz
75.000 Hz
46.875 kHz
49.500 MHz
XGA
1024 × 768
1280 × 768
60.004 Hz
48.363 kHz
65.000 MHz
70.069 Hz
56.476 kHz
75.000 MHz
75.029 Hz
60.023 kHz
78.750 MHz
WXGA
59.995 Hz
47.396 kHz
68.250 MHz
59.870 Hz
47.776 kHz
79.500 MHz
74.893 Hz
60.289 kHz
102.250 MHz
85.500 MHz
1360 × 768
60.015 Hz
47.712 kHz
SXGA
1280 × 1024
60.020 Hz
63.981 kHz
108.000 MHz
135.000 MHz
75.025 Hz
79.976 kHz
Download from Www.Somanuals.c8om8. All Manuals Search And Download.
INFORMATION
Media Player Supported Format
Media
Player
Media
Format Extension
File
Video codec
JPEG
Audio codec
USB Network
yes USB
Note
Photo JPEG
.jpg
.jpeg
yes
yes
yes
Data compatibility:
JPEG Exif ver 2.2
Maximum viewable
resolution:
–
•JPEG
15360 × 8640 (Base-
line)
1024 × 768
MPO
.mpo
.bmp
MPO
BMP
no
(Progressive)
•BMP
9600 × 6400
Maximum number of
files: 1000 / folder
–
Network
BMP
no
Data compatibility:
JPEG Exif ver 2.2
Maximum viewable
resolution:
4096 × 4096
Maximum number of
files: 1000/folder
–
NOTE: Some files
may not be played.
Movie AVI
.avi
MPEG-2
MPEG-4 part2
H.264 (MPEG-4 AVC) Dolby Digital (AC-3)
L-PCM
DivX
Xvid
MPEG-1/2 Layer2
MPEG-1/2 Layer3
yes
no
USB
Maximum number of
files: 1000 / folder
Maximum viewable
resolution:
ADPCM
MPEG-2/4 LC-AAC
MPEG-4 HE-AAC
• Motion-JPEG:640 ×
480
• Other:1920 × 1080
MPEG-2
PS
.mpg
.mpeg
MPEG-1 Video
MPEG-2 Video
MPEG-1/2 Layer3
yes
yes
no
Maximum video size:
Unlimited
MPEG-1/2 Layer2
Dolby Digital (AC-3)
L-PCM
yes
Network
Maximum video
resolution:
1920 × 1080
Maximum number of
file:1000 / folder
Maximum video size:
Unlimited
MPEG-2
TS
.ts
.trp
.tp
MPEG-2 Video
MPEG-1/2 Layer2
yes
yes
yes
no
H.264(MPEG-4 AVC) MPEG-1/2 Layer3
VC-1(WMV9)
Dolby Digital (AC-3)
L-PCM
MPEG-4 LC-AAC
MPEG-4 HE-AAC
NOTE: Some files
may not be played.
MPEG-2
VOB
.vob
MPEG-1 Video
MPEG-2 Video
MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
L-PCM
yes
no
Download from Www.Somanuals.c8om9. All Manuals Search And Download.
INFORMATION
Media
Player
Media
Format Extension
File
Video codec
Audio codec
USB Network
Note
Movie MOV
.mov
H.264 (MPEG-4 AVC) MPEG-1/2 Layer3
yes
no
MPEG-4 part2
MPEG-2/4 LC-AAC
MPEG-4 HE-AAC
MP4
.mp4
.m4v
H.264 (MPEG-4 AVC) MPEG-1/2 Layer3
MPEG-4 part12,14 MPEG-4 HE-AAC
yes
no
H.264 (MPEG-4 AVC) MPEG-2/4 LC-AAC yes
yes
no
ASF
DivX
Xvid
.asf
.wmv
VC-1 (WMV9)
DivX 3,4,5,6
Xvid
WMA7/8/9 Std
WMA9 Pro
yes
.divx
.div
MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
PCM
yes
no
.xvid
ADPCM
MKV
.mkv
MPEG-1 Video
MPEG-2 Video
MPEG-4 part2
H.264 (MPEG-4 AVC) L-PCM
MPEG-2/4 LC-AAC
MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
yes
yes
no
MPEG-4 HE-AAC
Flash
Video
(FLV1)
.flv
.swf
Sorenson H.263
(FLV1)
H.264 (MPEG-4 AVC) L-PCM
ADPCM
MPEG-1/2 Layer3
MPEG-2/4 LC-AAC
no
3GPP
.3gp
MPEG-4 part2
H.264 (MPEG-4 AVC)
MPEG-2/4 LC-AAC yes
no
no
Motion
JPEG
.avi
.mp4
.mkv
JPEG
L-PCM
yes
ADPCM
Music MP3
MP4
.mp3
.m4a
.wma
–
–
–
MPEG-1/2 Layer-3
yes
yes
yes
no
USB
Maximum number of
files: 1000 / folder
Maximum music size:
Unlimited
MPEG-2/4 LC-AAC yes
WMA
WMA7/8/ Std
WMA9 Std
WMA9 Pro
yes
yes
yes
yes
yes
no
Network
Sampling rate: 32,
44.1 and 48 KHz
Bit rate: 32 to
WAV
.wav
–
–
LPCM
ADPCM
MPEG-1/2 Layer-3
WMA7/8/9/ Std
WMA9 Pro
no
320 kbps
Maximum number of
files: 1000 / folder
Maximum music size:
Unlimited
LPCM
no
yes
NOTE: Some files
may not be played.
Download from Www.Somanuals.c9om0. All Manuals Search And Download.
INFORMATION
Licence information
• Manufactured under license from Dolby
• THIS PRODUCT IS LICENSED UNDER THE AVC
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE OF A
CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE
WITH THE AVC STANDARD (AVC VIDEO) AND/OR (ii)
DECODE AVC VIDEO THAT WAS ENCODED BY A
CONSUMER ENGAGED IN A PERSONAL AND
NONCOMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED
FROM MPEG LA, L.L.C.
• HDMI, the HDMI logo, and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
• This product contains Adobe® Flash®
Player software under license from
Adobe Systems Incorporated.
Copyright© 1995-2009 Adobe Systems
Incorporated.
SEE HTTP://WWW.MPEGLA.COM
• THIS PRODUCT IS LICENSED UNDER THE MPEG-4
VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE OF A
CONSUMER FOR (i) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD ("MPEG-4 VIDEO") AND/OR (ii)
DECODING MPEG-4 VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM MPEG
LA,L.L.C.
All rights reserved. Adobe and Flash are
trademarks of Adobe Systems
Incorporated.
• DivX®, DivX Certified®, DivX Plus® HD
and associated logos are trademarks of
Rovi Corporation or its subsidiaries and
are used under license.
Covered by one or more of the following
U.S. patents:
7,295,673; 7,460,668; 7,515,710;
7,519,274
• DVB is a registered trademark of the
DVB Project.
• Hybrid TV Standard is implemented
according to ETSI TS 102 796 v1.1.1.
SEE HTTP://WWW.MPEGLA.COM
• Intel and the Intel logo are trademarks of
Intel Corporation in the U.S. and/or other
countries.
• MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
• You can check the software components and obtain a
copy of the source codes including GPL and LGPL
subject to such EULA requirements on the following
Home Page:
• MHL, Mobile High-Definition Link and the
MHL Logo are trademarks or registered
trademarks of the MHL, LLC.
ContentFrameSet?OpenFrameset
There will be a charge to cover the costs of providing the
source code.
• DLNA™, DLNA CERTIFIED™, DLNA CERTIFIED Logo
are trademarks, service marks, or certification marks of
the Digital Living Network Alliance.
Download from Www.Somanuals.c9om1. All Manuals Search And Download.
INFORMATION
EU Conformity Statement
This product is carrying the CE-Mark in accordance with the related European Directives.
Responsible for CE-Marking is TOSHIBA TELEVISION CENTRAL EUROPE Sp. z o.o., ul. Pokoju 1 Biskupice
Podgórne 55-040 Kobierzyce, Poland
This product is labeled with the CE Mark in accordance with the related European Directives, notably Low Voltage
Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS Directive 2011/65/EU.
Furthermore the product complies with the Ecodesign Directive 2005/32/EC (EuP) and 2009/125/EC (ErP) and its
related implementing measures.
If this product has an integrated Wireless LAN feature, the Radio Equipment and Telecommunications Terminal
Equipment Directive 1999/5/EC is also applicable.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any
proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Disposal…
The following information is only for EU-member states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of
separately from household waste. Integrated batteries and accumulators can be disposed of with the
product. They will be separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper
disposal of products and batteries and thus help to prevent potential negative consequences for the
environment and human health.
For more detailed information about the collection and recycling programmes available in your country,
please contact your local city office or the shop where you purchased the product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be
collected and disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/
or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead
(Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential negative consequences for the environment
and human health.
For more detailed information about the collection and recycling programmes available in your country,
please contact your local city office or the shop where you purchased the product.
Download from Www.Somanuals.c9om2. All Manuals Search And Download.
INFORMATION
Specifications and accessories
Receiving systems
Power consumption
(approx.)
32W
32L
39L
50L
81 W
86 W
DVB-T Broadcast systems/
channels
Broadcast systems/channels
138 W
177 W
UK
UHF 21-68
PAL-I
UHF UK21-UK69
France
VHF 05-10
(VHF 01-05)
UHF 21-69
PAL-B/G
UHF E21-E69
VHF E2-E12,
S1-S41
Standby power consumption 0.3 W
(approx.)
Energy Efficiency Class
32W
32L
39L
50L
A+
Germany
Austria
VHF 05-12
UHF 21-69
SECAM-L
UHF F21-F69
VHF F1-F10, B-Q
A+
A+
VHF 05-12
UHF 21-69
SECAM-D/K UHF R21-R69
VHF R1-R12
A+
On-mode power consumption* 32W
33.9 W
33.9 W
48.3 W
74.5 W
47.0 kWh/y
47.0 kWh/y
67.0 kWh/y
103.3 kWh/y
Switzerland VHF 05-12
UHF 21-69
(approx.)
32L
Italy
VHF 05-12 (D,E,F,G,H,H1,H2)
39L
50L
UHF 21-69
Spain
UHF 21-69
Average annual energy
consumption**
(approx.)
32W
32L
39L
50L
Netherlands VHF 05-12
UHF 21-69
Greece
VHF 05-12
UHF 21-69
* Tested in accordance with IEC 62087-BD in default settings.
** Operating 4 hours a day and 365 days a year.
DVB-C Broadcast systems
DVB-T2 Broadcast systems (L435*/L436* series only)
DVB-S/DVB-S2 Broadcast systems (L436* series only)
Dimensions
32W
32L
39L
50L
50.4 cm (H) 73.6 cm (W) 18.0 cm (D)
50.4 cm (H) 73.6 cm (W) 18.0 cm (D)
59.0 cm (H) 89.1 cm (W) 20.0 cm (D)
74.3 cm (H) 113.6 cm (W) 23.0 cm (D)
(approx.)
Video Input
PAL, SECAM, NTSC 3.58/4.43
External connections
EXT 1
EXT 2
Input/Output
Input
21-pin SCART
RGB, A/V input
AV out, TV out
(Height dimension includes foot stand)
Weight
(approx.)
32W
32L
39L
50L
6.5 kg
6.5 kg
8.0 kg
18.0 kg
RCA jacks
RCA jack
Y, P /C , P /C
B
B
R
R
Video
(Y is shared)
RCA jacks
®
Audio L + R
(shared)
Operating
condition
Temperature 5 °C - 35 °C (41 °F - 94 °F)
Humidity 20 - 80 % (non-condensing)
HDMI 1/2/3/4 Input
PC Input
HDMI compliant HDCP compliant
HDMI 3 is compatible with MHL
Wireless
connection
•
•
Standard: IEEE 802.11a/b/g/n
Frequency Range: 5.15-5.35 GHz,
5.47-5.725 GHz, 5.725-5.850 GHz,
2.400-2.4835 GHz
MiniD-sub15-pin
Analogue
Digital Audio Output
(S/PDIF)
Optical
•
•
Security: WEP64/128, TKIP, AES,
WPA/WPA2-PSK, WPS, None
LAN port
RJ-45
Supplied
accessories
Remote control CT-90429
USB 1/USB 2 port
Media Player
2 batteries (AAA, IEC R03 1.5 V)
Screw (for TV mounting) See page 5.
Interface version: USB 2.0
USB class: Mass Storage
File system: FAT16 and FAT32
•
•
Optional
accessories
USB HDD : HDTC610EK3B1,
HDTC610EL3B1, HDTC610EW3B1
Skype camera : TALK-7291
Headphone socket
3.5 mm stereo
•
Stereo
A2, Nicam
2 carrier system
Visible Screen Size
(approx.)
32
39
50
80 cm
98 cm
126 cm
Screen resolution
32W
32L
1366 × 768
1920 × 1080
1920 × 1080
1920 × 1080
(H × V pixels)
39L
50L
Display
16:9
Main:
Sound output
7 W + 7 W
(at 10 % distortion)
Specification is subject to change without notice.
Download from Www.Somanuals.c9om3. All Manuals Search And Download.
© TOSHIBA Television Central Europe Sp. z o.o.
All rights reserved.
Reproduction in whole or part without written permission is strictly prohibited.
TOSHIBA Television Central Europe Sp. z o.o.
ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland
T 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|