Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright
This publication, including all photographs, illustrations and software, is protected under international
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may
be reproduced without written consent of the author.
© Copyright 2013
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no
representations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations
and pending applications in other countries throughout the world.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
is a trademark of SRS Labs, Inc. WOW technology is incorporated under license from
SRS Labs, Inc.
WOW® significantly improves the playback quality of audio, delivering a dynamic 3D
entertainment experience with deep rich bass.
All other product names used in this manual are the properties of their respective owners and are
acknowledged.
— i —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the projector. These
safety and usage instructions will ensure that you enjoy many years of safe use of the projector.
Keep this manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause
personal injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
General Safety Information
¾
Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in
the unit. For servicing, contact qualified service personnel.
¾
¾
Follow all warnings and cautions in this manual and on the unit case.
The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the lamp is on.
¾
¾
¾
Do not place the unit on an unstable surface, cart, or stand.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not place heavy objects such as books or bags on the unit.
— ii —
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Projector Installation Notice
¾ Place the projector in a horizontal position
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be
installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease
dramatically, and may lead to other unpredictable damages.
¾
Allow at least 50 cm clearance around the exhaust vent.
¾
¾
Ensure that the intake vents do not recycle hot air from the exhaust vent.
When operating the projector in an enclosed space, ensure that the surrounding air temperature
within the enclosure does not exceed operation temperature while the projector is running, and the
air intake and exhaust vents are unobstructed.
¾
All enclosures should pass a certified thermal evaluation to ensure that the projector does not
recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature is
with the acceptable operation temperature range.
–iii –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Verify Installation Location
¾
To supply power, the 3-blade (with earthing lead) socket should be used to ensure proper
grounding and equalized ground potential for all of the equipment in the Projector System.
¾
The power code provided with the Projector should be used. In case of any missing item, other
qualified 3-blade (with earthing lead) power cord can be used as substitution; however, do not use
2-blade power cord.
¾
¾
Verify if the voltage is stable, grounded properly and there is no electricity leakage.
Measure total power consumption which should not higher the safety capacity and avoid safety
issue and short circuit.
¾
¾
¾
¾
¾
¾
Turn on Altitude Mode when located in high altitude areas
The projector can only be installed upright or inverted.
When installation the bracket, make sure the weight limit is not exceed and firmly secured.
Avoid installing near air conditioner duct or subwoofer.
Avoid installing at high temperature, insufficient cooling and heavy dust locations.
Keep your product away from fluorescent lamps to avoid malfunction
caused by IR interference
¾
¾
The VGA IN connector should be connected to the VGA IN port. Note that it should be inserted
tightly, with the screws on both sides securely fastened to ensure proper connection of the signal
wire for achieving optimal display effect.
The AUDIO IN connector should be connected to the AUDIO IN port and CANNOT be connected
to AUDIO OUT or other ports like BNC, RCA; otherwise, it will lead to mute output and even
DAMAGE the port.
¾
¾
Install the projector above 200cm to avoid damage.
The power cord and signal cable should be connected before power on the projector. During the
projector starting and operating process, DO NOT insert or remove the signal cable or the power
cord to avoid damaging the projector.
Cooling notes
Air outlet
¾
¾
¾
Make sure the air outlet is 50cm clear of any obstruction to ensure proper cooling.
Air outlet location should not be in front of the lens of other projector to avoid causing illusions.
Keep the outlet at least 100cm away from the inlets of other projectors
¾
The projector generates a massive amount of heat during use. The internal fan dissipates the heat
of the projector when shutting down, and such process may continue for a certain period. After the
project enters STANDBY MODE status, press the AC power button to turn off the projector and
remove the power cord. DO NOT remove the power cord during the shutdown process, as it may
cause damage to the projector. In the meantime, the delayed heat radiating will also affect the
service life of the projector. The shutdown process may vary depending on the model used.
Whatever the case may be, be sure to disconnect the power cord till after the projector enters the
STANDBY status.
Air inlet
¾
¾
¾
Make sure there is no object blocking air input within 30 cm.
Keep the inlet away from other heat sources
Avoided heavy dust area
— iv —
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Power Safety
¾
¾
Only use the supplied power cord.
Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
¾
Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. See Replacing the Projection Lamp on page 35
for clear and safe instructions for this procedure. Before replacing the lamp:
¾
¾
Unplug the power cord.
Allow the lamp to cool for about one hour.
Caution:
In rare cases the lamp bulb may burn out during normal operation and cause glass dust or shards
to be discharged outward from the rear exhaust vent.
Do not inhale or do not touch glass dust or shards. Doing so could result in injury.
Always keep your face away from the exhaust vent so that you do not suffer from the gas and
broken shards of the lamp.
Cleaning the Projector
¾
¾
Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the Regulatory Compliance on
Important Recycle Instructions:
Hg
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that
can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal
Symbol Explanations
DISPOSAL: Do not use household or municipal waste collection services for
disposal of electrical and electronic equipment. EU countries require the use
of separate recycling collection services.
–v –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Main Features
•
•
•
•
•
•
•
Lightweight unit, easy to pack away and transport.
Compatible with all major video standards including NTSC, PAL, and SECAM.
A high brightness rating allows for presentations in daylight or in lit rooms.
Supports resolutions up to UXGA at 16.7 million colors to deliver crisp, clear images.
Flexible setup allows for front, rear projections.
Line-of-vision projections remain square, with advanced keystone correction for angled projections.
Input source automatically detected.
About this Manual
This manual is intended for end users and describes how to install and operate the DLP projector.
Wherever possible, relevant information—such as an illustration and its description—has been kept on
one page. This printer-friendly format is both for your convenience and to help save paper, thereby
protecting the environment. It is suggested that you only print sections that are relevant to your needs.
— vi —
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Table of Contents
GETTING STARTED........................................................................................................................................................... 1
PACKING CHECKLIST........................................................................................................................................................... 1
VIEWS OF PROJECTOR PARTS............................................................................................................................................... 2
Front-right View ............................................................................................................................................................ 2
Top view—On-screen Display (OSD) buttons and LEDs....................................................................................... 3
Rear view....................................................................................................................................................................... 4
Bottom view................................................................................................................................................................... 6
REMOTE CONTROL PARTS ................................................................................................................................................... 7
REMOTE CONTROL OPERATING RANGE............................................................................................................................... 9
PROJECTOR AND REMOTE CONTROL BUTTONS.................................................................................................................... 9
INSERTING THE REMOTE CONTROL BATTERIES ................................................................................................................. 10
SETUP AND OPERATION............................................................................................................................................... 11
STARTING AND SHUTTING DOWN THE PROJECTOR............................................................................................................. 11
SETTING AN ACCESS PASSWORD (SECURITY LOCK).......................................................................................................... 13
ADJUSTING THE PROJECTOR LEVEL................................................................................................................................... 15
ADJUSTING THE ZOOM, FOCUS AND KEYSTONE ................................................................................................................ 16
ADJUSTING THE VOLUME .................................................................................................................................................. 16
ON-SCREEN DISPLAY (OSD) MENU SETTINGS...................................................................................................... 17
OSD MENU CONTROLS ..................................................................................................................................................... 17
Navigating the OSD ................................................................................................................................................... 17
SETTING THE OSD LANGUAGE .......................................................................................................................................... 18
OSD MENU OVERVIEW ..................................................................................................................................................... 19
IMAGE MENU..................................................................................................................................................................... 20
Computer Menu.......................................................................................................................................................... 21
Advanced Feature...................................................................................................................................................... 22
Color Manager............................................................................................................................................................ 23
SETTINGS 1 MENU ............................................................................................................................................................. 24
Audio............................................................................................................................................................................ 25
Advanced 1 Feature................................................................................................................................................... 26
Advanced 2 Feature................................................................................................................................................... 28
SETTINGS 2 MENU ............................................................................................................................................................. 29
Status........................................................................................................................................................................... 30
Advanced 1 Feature................................................................................................................................................... 31
Advanced 2 Feature................................................................................................................................................... 33
MAINTENANCE AND SECURITY.................................................................................................................................. 35
REPLACING THE PROJECTION LAMP................................................................................................................................... 35
Resetting the Lamp.................................................................................................................................................... 37
CLEANING THE PROJECTOR................................................................................................................................................ 38
Cleaning the Lens ...................................................................................................................................................... 38
Cleaning the Case...................................................................................................................................................... 38
USING THE KENSINGTON LOCK & USING THE SECURITY BAR......................................................................................... 39
Using the Kensington® Lock ..................................................................................................................................... 39
Using the Security Bar............................................................................................................................................... 39
TROUBLESHOOTING...................................................................................................................................................... 40
COMMON PROBLEMS AND SOLUTIONS ............................................................................................................................... 40
TIPS FOR TROUBLESHOOTING ............................................................................................................................................ 40
LED ERROR MESSAGES..................................................................................................................................................... 41
IMAGE PROBLEMS.............................................................................................................................................................. 41
LAMP PROBLEMS ............................................................................................................................................................... 42
REMOTE CONTROL PROBLEMS .......................................................................................................................................... 42
AUDIO PROBLEMS ............................................................................................................................................................. 42
HAVING THE PROJECTOR SERVICED .................................................................................................................................. 43
–vii –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
SPECIFICATIONS............................................................................................................................................................. 45
SPECIFICATIONS................................................................................................................................................................. 45
PROJECTION DISTANCE VS. PROJECTION SIZE.................................................................................................................... 46
Projection Distance and Size Table......................................................................................................................... 46
TIMING MODE TABLE ........................................................................................................................................................ 47
PROJECTOR DIMENSIONS ................................................................................................................................................... 49
REGULATORY COMPLIANCE....................................................................................................................................... 50
FCC WARNING.................................................................................................................................................................. 50
CANADA ............................................................................................................................................................................ 50
SAFETY CERTIFICATIONS................................................................................................................................................... 50
APPENDIX I........................................................................................................................................................................ 51
RS-232C PROTOCOL.......................................................................................................................................................... 51
— viii —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
GETTING STARTED
Packing Checklist
Carefully unpack the projector and check that the following items are included:
DLP PROJECTOR WITH LENS CAP
REMOTE CONTROL
RGB CABLE
POWER CORD
(WITH TWO AA BATTERIES)
CARRYING CASE
CD-ROM
QUICK START GUIDE
WARRANTY CARD
(OPTIONAL)
(THIS USER’S MANUAL)
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommend that you keep the original packing material should you ever need to return the equipment
for warranty service.
Caution:
Avoid using the projector in dusty environments.
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Views of Projector Parts
Front-right View
ITEM
1.
LABEL
IR receiver
DESCRIPTION
Receive IR signal from remote control
Projection Lens
SEE PAGE
Lens
2.
Focus ring
Zoom ring
Focuses the projected image
Enlarges the projected image
3.
4.
See Top view—On-screen Display (OSD) buttons
and LEDs.
Function keys
5.
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp
cool. Do not obstruct any of the ventilation openings.
— 2 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Top view—On-screen Display (OSD) buttons and LEDs
1
2
6
3
7
8
4
5
9
12
10
11
ITEM
LABEL
DESCRIPTION
Opens and exits OSD menus
SEE PAGE
MENU
1.
Navigates in the OSD
Quick Menu – For Keystone
2.
SOURCE
AUTO
Enter the Source menu
3.
4.
5.
6.
Navigates and changes settings in the OSD
Enter or confirm highlighted OSD menu item
Optimizes image size, position, and resolution
Navigates and changes settings in the OSD
7.
8.
9.
Navigates in the OSD
Quick Menu – For Keystone
Turns the projector On or Off
Red
Lamp Fail
Error code
LAMP LED
10.
Flashing
Ready to power on (Standby)
Lamp Lit , System stable
Over Temperature
Green
POWER LED
TEMP LED
11.
12.
Flashing
Red
Error code
Over Temperature
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Rear view
3
10
1
2
4 5 6 7 8
9
16 15 13 11
14 12
ITEM
LABEL
DESCRIPTION
SEE PAGE
AC IN
Connect the POWER cable
1.
Connect the 3D IR glasses transmitter
3D SYNC
2.
(Note: For Vivitek brand 3D IR glasses only)
Connect the HDMI cable from a HDMI device
Connect the HDMI cable from a HDMI device
Connect the USB cable from a computer
Connect the RGB cable from a computer
Connect RS-232 serial port cable for remote control
Connect the Component cable from a component device
For USB charge support DC 5V
HDMI 1
HDMI 2
3.
4.
5.
6.
7.
8.
9.
(USB)
VGA IN
RS-232C
COMPONENT
USB POWER
Secure to permanent object with a Kensington® Lock
system
Kensington Lock
10.
VIDEO IN
Connect the COMPOSITE cable from a video device
Connect the AUDIO cable from a audio device
Connect the S-VIDEO cable from a video device
Connect an AUDIO cable from the audio device
Connect an AUDIO cable to audio amplifier
11.
12.
13.
14.
15.
AUDIO IN (L and R)
S-VIDEO
AUDIO IN
AUDIO OUT
When connected to the screen through a commercially available cable,
the screen deploys automatically on start up of the projector. The screen
retracts when the projector is powered off (see notes below).
DC 12V TRIGGER
16.
Note:
y To use this feature, you must plug in the connector before turn on/off the projector.
y Screen controllers are supplied and supported by screen manufacturers.
y Do not use this jack for anything other than intended use.
— 4 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Note:
If your video equipment has both S-VIDEO and RCA jacks (composite video) connect to the
S-VIDEO connector. S-VIDEO provides a better quality signal.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Bottom view
ITEM
1.
LABEL
Ceiling support holes
Tilt adjustor
DESCRIPTION
SEE PAGE
Contact your dealer for information on mounting the projector on a
ceiling
Rotate adjuster lever to adjust angle position.
2.
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 12 mm (0.47 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 5.15 kg) over a
period of 60 seconds.
— 6 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Remote Control Parts
30
29
1
2
3
28
27
4
5
6
7
26
25
8
9
10
11
12
13
14
15
24
23
22
21
20
16
17
18
19
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency
fluorescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path
between the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on
the remote control. This user’s manual describes the functions based on the remote control.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
ITEM
1.
LABEL
Power OFF
HDMI 2
DESCRIPTION
Turns the projector off
SEE PAGE
Displays the HDMI 2 source selection
Displays the PC source selection
Displays the VIDEO source selection
2.
PC
3.
VIDEO
4.
Up cursor /
Keystone+
Navigates and changes settings in the OSD
Quick Menu – For Keystone
5.
ENTER
Enters and confirms settings in the OSD
Navigates and changes settings in the OSD
6.
7.
Right cursor
Downp cursor /
Keystone-
Navigates and changes settings in the OSD
Quick Menu – For Keystone
8.
ASPECT RATIO
SOURCE
Displays the ASPECT RATIO selections
Detects the input device
9.
10.
11.
2D f 3D
Toggle 3D function
BRIGHT
SHARP
COLOR
TINT
Displays the brightness setting bar
Displays the sharpness setting bar
Displays the color setting bar
Displays the tint setting bar
12.
13.
14.
15.
16.
BLANK
Makes the screen blank
FREEZE
AUTO
Freezes/unfreezes the on-screen picture
17.
18.
Auto adjustment for frequency, phase, and position
Turns on or off the remote control backlight for about 10 seconds.
Pressing any other key while the backlight is on keeps the backlight on
for a further 10 seconds.
LIGHT
19.
VOL -
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Adjusts volume
VOL +
MUTE
Mutes the built-in speaker
CONTRAST
PICTURE MODE
MENU/ EXIT
Left cursor
COMP
Displays the contrast settings bar
Changes the Display Mode setting
Opens and exits the OSD
Navigates and changes settings in the OSD
Displays the Component source selection
Displays the HDMI 1 source selection
Turns the projector on
HDMI 1
Power ON
IR transmitter
Transmits signals to projector
— 8 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and
15 degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are
limited in use.
– 9 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Inserting the Remote Control Batteries
Remove the battery compartment
cover by sliding the cover in the
direction of the arrow.
1.
Insert the battery with the positive
side facing up.
2.
Replace the cover.
3.
Caution:
1. Only use AA batteries (Alkaline batteries are recommended).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the batteries when not using the projector for prolonged periods.
— 10 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
SETUP AND OPERATION
Starting and Shutting down the Projector
Connect the power cord to the
projector. Connect the other end to
a wall outlet.
1.
The
POWER LED on the
projector light.
Turn on the connected devices.
Ensure the POWER LED not a
2.
3.
flashing. Then press the
POWER
button to turn on the projector.
The projector splash screen displays
and connected devices are
detected.
security lock is enabled.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
devices.
4.
(Component is supported through
the RGB to COMPONENT
ADAPTER.)
•
VGA: Analog RGB
•
•
•
•
Component Video: Traditional component video
Composite Video: Traditional composite video
S-Video: Super video (Y/C separated)
HDMI 1 / HDMI 2: High-Definition Multimedia
Interface
– 11 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
When the “Power Off? /Press
5.
Power again” message appears,
press the POWER button. The
projector turns off.
Caution:
1. Be sure to remove the lens cap before starting projector.
2. Do not unplug the power cord until the POWER LED stops flashing–indicating the projector has
cooled down.
— 12 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Setting an Access Password (Security Lock)
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector.
When enabled, the password must be entered after you power on the projector. (See Navigating the
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact your reseller for information on clearing the password.
Press the MENU button to open the
OSD menu.
1.
Press the cursor ◄► button to move
to the Settings 1 menu, press the
2.
cursor ▲▼ button to select Advanced
1.
Press
(Enter) / ► to enter the
3.
4.
Advanced 1 sub menu. Press the
cursor ▲▼ button to select Security
Lock.
Press the cursor ◄► button to enter
and enable or disable security lock
function.
A password dialog box automatically
appears.
– 13 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
You can use the cursor buttons
▲▼◄►
5.
either on keypad or IR remote control
for password entry. You can use any
combination including the same arrow
five times, but not less than five.
Press the cursor buttons in any order
to set the password. Push the MENU
button to exit the dialog box.
The password confirm menu appears
6.
when user presses the power-on key
in case the Security Lock is enabled.
Enter the password in the order you
set it at step 5. In case you forget the
password, please contact the service
center.
The service center will validate the
owner and help reset the password.
— 14 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
•
•
•
The projector table or stand should be level and sturdy.
Position the projector so that it is perpendicular to the screen.
Ensure the cables are in a safe location. You could trip over them.
To adjust the angle of the picture, turn the tilt-adjuster right or left until the desired
angle has been achieved.
– 15 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Adjusting the Zoom, Focus and Keystone
Use the Image-zoom
control (on the projector
only) to resize the
1.
projected image and
screen size
.
Use the Image-focus
control (on the projector
only) to sharpen the
2.
3.
projected image
.
Use the KEYSTONE
buttons (on the
projector or the remote
control) to correct
image-trapezoid (wider
top or bottom) effect.
The keystone control
appears on the display.
4.
Adjusting the Volume
Press the Volume +/-
buttons on the remote
control.
1.
The volume control
appears on the display.
Press the MUTE button
to turn off the volume.
(This feature is available
only on the remote).
2.
— 16 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
ON-SCREEN DISPLAY (OSD) MENU SETTINGS
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons to navigate and make changes to the OSD.
1
2
1
2
3
4
1
3
5
4
1
5
1. To enter the OSD, press the
MENU button.
2. There are three menus.
Press the cursor ◄► button
to move through the menus.
3. Press the cursor ▲▼ button
to move up and down in a
menu.
4. Press ◄► to change values
for settings.
5. Press MENU to close the
OSD or leave a submenu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the
Horizontal/Vertical Position items in the Computer menu can only be modified when connected
to a PC. Items that are not available cannot be accessed and are grayed out.
– 17 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Setting the OSD Language
Set the OSD language to your preference before continuing.
1. Press the MENU button. Press the cursor ◄► button to navigate to Settings 1. Press the
cursor ▲▼ button to move to the Advanced 1 menu.
2. Press
(Enter) / ► to enter the Advanced 1 sub menu. Press the cursor ▲▼ button
until Language is highlighted.
3. Press the cursor button until the language you want is highlighted.
4. Press the MENU button four times to close the OSD.
— 18 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
Display Mode
Presentation, Bright, Game, Movie, TV, sRGB, Blackboard, User
Image
Brightness
Contrast
Computer
Horizontal Position
Vertical Position
Frequency
Tracking
Auto Image
Advanced
1.8, 2.0, 2.2, 2.4, B&W, Linear
Color Manager
Green
Blue
Hue
Saturation
Gain
Hue
Saturation
Gain
Hue
Saturation
Gain
Cyan
Hue
Saturation
Gain
Magenta
Yellow
Hue
Saturation
Gain
Hue
Saturation
Gain
White
Red
Green
Blue
Source
Projection
Aspect Ratio
Keystone
Source
Reference Input Source Select (IR/Keypad)
Settings 1
Normal, Real, Ceiling, Real+Ceiling
Fill, 4:3, 16:9, Letter Box, Native, 2.35:1
Digital Zoom
Audio
Volume
Mute
SRS
Advanced 1
Language
English, Frans, Deutsch, Español, Português, 簡体中文, 繁體中文, Italiano, Norsk,
Svenska, Nedlads, Русский, Polski, Suomi, Ελληνικά, 한국어, Magyar, Čeština,
اﻟﻌﺮﺑﻴﺔ , Türkçe, Việt, 日本語, ไทย,
ﻓﺎرﺳﯽ , תירבע Security Lock
Blank Screen
Off, On
Blank, Red, Green, Blue, White
Splash Logo
Closed Captioning
Keypad Lock
Std., Off, User
Off, On
Off, On
Off, DLP-Link, IR
Off, On
3D Setting
3D
3D Sync Invert
3D Format
Frame Sequential, Top/Bottom, Side-By-Side, Frame Packing
(3D FramePacking HDMI source only)
Advanced 2
Test Pattern
H Image Shift
V Image Shift
None, Grid, White, Red, Green, Blue, Black
Auto Source
No Signal Power Off
Auto Power On
Off, On
Settings 2
Off, On
Std. , Boost
Lamp Mode
Reset All
Status
Advanced 1
Menu Position
Center, Down, Up, Left, Right
0%, 25%, 50%, 75%, 100%
Translucent Menu
Low Power Mode
Fan Speed
Off, On
Normal, High
Lamp Hour Reset
Projector ID
00-98
Advanced 2
Sleep Timer
Disable, Enable
Disable, Enable
Disable, Enable
Source Filter
VGA1
Component Video
Composite Video
S-Video
Disable, Enable
Disable, Enable
Disable, Enable
HDMI 1
HDMI 2
– 19 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Image Menu
Attention !
All of display mode parameters when changed will be saved to user mode.
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image
Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to enter
and change values for settings.
ITEM
DESCRIPTION
Display Mode
Brightness
Contrast
Press the cursor ◄► button to enter and set the Display Mode.
Press the cursor ◄► button to enter and adjust the display brightness.
Press the cursor ◄► button to enter and adjust the display contrast.
Computer
Press
Press
position.
(Enter) / ► to automatically adjustment for phase, tracking, size and
Auto Image
Advanced
Press
22.
Press
Color Manager
— 20 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Computer Menu
Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼
to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and down in the
Computer menu.
ITEM
DESCRIPTION
Horizontal Position
Vertical Position
Frequency
Press the cursor ◄► button to enter and adjust the display position to left or right.
Press the cursor ◄► button to enter and adjust the display position to up or down.
Press the cursor ◄► button to enter and adjust the A/D sampling clock.
Press the cursor ◄► button to enter and adjust the A/D sampling dot.
Tracking
– 21 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Advanced Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲
to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the
Advanced menu.
ITEM
DESCRIPTION
Brilliant Color
Sharpness
Gamma
Press the cursor ◄► button to enter and adjust the Brilliant Color value.
Press the cursor ◄► button to enter and adjust the display sharpness.
Press the cursor ◄► button to enter and adjust the gamma correction of the display.
Color Temperature Press the cursor ◄► button to enter and adjust the color temperature.
Press the cursor ◄► button to enter and enable or disable the Automatic Gain Control
for video source.
Video AGC
Video Saturation
Video Tint
Press the cursor ◄► button to enter and adjust the video saturation.
Press the cursor ◄► button to enter and adjust the video tint/hue.
— 22 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Color Manager
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲
to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in
the Color Manager menu.
ITEM
DESCRIPTION
Select to enter the Red Color Manager.
Red
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the Green Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Green
Blue
Select to enter the Blue Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the Cyan Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Cyan
Select to enter the Magenta Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Magenta
Yellow
White
Select to enter the Yellow Color Manager.
Press the◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the White Color Manager.
Press the ◄► buttons to adjust the Red, Green, and Blue.
– 23 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Settings 1 Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press
◄► to enter and change values for settings.
ITEM
Source
DESCRIPTION
Press the cursor ◄► button to enter the Source menu. Reference input Source select
(IR / Keypad).
Projection
Aspect Ratio
Keystone
Digital Zoom
Audio
Press the cursor ◄► button to enter and choose from four projection methods:
Press the cursor ◄► button to enter and adjust the video aspect ratio.
Press the cursor ◄► button to enter and adjust the display keystone.
Press the cursor ◄► button to enter and adjust the Digital Zoom menu.
Press
Press
Advanced 1
Advanced 2
Press
— 24 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Audio
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press
▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the
Audio menu.
ITEM
Volume
DESCRIPTION
Press the cursor ◄► button to enter and adjust the audio volume.
Press the cursor ◄► button to enter and turn on or off the speaker.
Press the cursor ◄► button to enter and turn on or off the audio surround.
Mute
SRS
– 25 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Advanced 1 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 1 menu. Press ◄► to enter and change values for setting.
ITEM
Language
DESCRIPTION
Press the cursor ◄► button to enter and select a different localization Menu.
Press the cursor ◄► button to enter and enable or disable security lock function.
Press the cursor ◄► button to enter and select different color to blank the screen.
Press the cursor ◄► button t enter and o select splash logo on or off.
Security Lock
Blank Screen
Splash Logo
Closed Captioning
Press the cursor ◄► button to enter and enable or disable Closed Captioning
Press the cursor ◄► button to enter and enable or disable keys can be work on
keypad.
Keypad Lock
3D Setting
Note:
Press
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under the
3D Disc Menu.
— 26 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
3D Setting
ITEM
DESCRIPTION
3D
Press the cursor ◄► button to enter and select different 3D mode.
3D Sync Invert
3D Format
Press the cursor ◄► button to enter and enable or disable 3D Sync Invert.
Press the cursor ◄► button to enter and enable or disable different 3D Format.
Note:
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting.
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for
selection.
3. Use 3D glasses to view a 3D image.
4. You need 3D content from a 3D DVD or 3D media file.
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection feature).
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a
driver on your PC and connect a USB emitter.
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D).
8. Power on the glasses. Glasses normally have a power on -off switch.
Each type of glasses has their own configuration instructions. Please follow the configuration
instructions that come with your glasses to finish the setup process.
Note:
Since different types of glass (DLP link or IR shutter glass) have their own setting instructions,
Please follow the guide to finish the setup process.
– 27 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Advanced 2 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press
▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 2 menu. Press ◄► to enter and change values for setting.
ITEM
DESCRIPTION
Test Pattern
H Image Shift
V Image Shift
Press the cursor ◄► button to enter and select internal test pattern.
Press the cursor ◄► button to enter and select H Image Shift.
Press the cursor ◄► button to enter and select V Image Shift.
— 28 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Settings 2 Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.
ITEM
DESCRIPTION
Press the cursor ◄► button to enter and enable or disable automatic source
detection.
Auto Source
No Signal Power
Off (min.)
Press the cursor ◄► button to enter and enable or disable automatic shutdown of
lamp when no signal.
Press the cursor ◄► button to enter and enable or disable automatic power On when
AC power is supplied.
Auto Power On
Lamp Mode
Press the cursor ◄► button to enter and select the lamp mode for higher brightness
or lower brightness to save lamp life.
Reset All
Status
Press
(Enter) / ► to reset all settings to default values.
Press
Press
Advanced 1
Advanced 2
Press
– 29 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Status
Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status menu
and press Enter or ► to enter.
ITEM
DESCRIPTION
Active Source
Display the activated source.
Displays resolution/video information for RGB source and color standard for Video
source.
Video Information
Lamp Hours
Lamp hour used information is displayed. ( ECO. and Normal)
— 30 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Advanced 1 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 1 menu. Press ◄► to enter and change values for setting.
ITEM
DESCRIPTION
Menu Position
Press the cursor ◄► button to enter and select different OSD location.
Press the cursor ◄► button to enter and select OSD background translucent level.
Press the cursor ◄► button to enter and turn Low Power Mode on or off.
Translucent Menu
Low Power Mode
Press the cursor ◄► button to enter and toggle between Normal and High fan
speeds.
Note: We recommend selecting high speed in high temperatures, high humidity, or
high altitude (higher than 1500m/4921ft) areas.
Fan Speed
Lamp Hour Reset
Projector ID
Press the cursor ◄► button to enter and adjust a two digit projector ID from 00
through 98.
– 31 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Advanced 2 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press
▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 2 menu. Press ◄► to enter and change values for setting.
ITEM
DESCRIPTION
Press the cursor ◄► button to enter and set Sleep timer. The projector automatically
turns off after the preset period of time.
Sleep Timer
Press
Source Filter
– 33 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Source Filter
Press the ENTER button to enter the Source Filter sub menu.
ITEM
DESCRIPTION
VGA
Press the cursor ◄► button to enter and enable or disable the VGA1 source.
Press the cursor ◄► button to enter and enable or disable the Component Video
source.
Component Video
Composite Video
Press the cursor ◄► button to enter and enable or disable the Composite Video
source.
S-Video
HDMI 1
HDMI 2
Press the cursor ◄► button to enter and enable or disable the S-Video source.
Press the cursor ◄► button to enter and enable or disable the HDMI 1 source.
Press the cursor ◄► button to enter and enable or disable the HDMI 2 source.
— 34 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
MAINTENANCE AND SECURITY
Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
Important:
a. The projection lamp used in this product contains a small amount of mercury.
b. Do not dispose this product with general household waste.
c. Disposal of this product must be carried out in accordance with the regulations of your local
authority.
Warning:
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to
do so could result in a severe burn.
Caution:
In rare cases the lamp bulb may burn out during normal operation and cause glass dust or shards
to be discharged outward from the rear exhaust vent.
Do not inhale or do not touch glass dust or shards. Doing so could result in injury.
Always keep your face away from the exhaust vent so that you do not suffer from the gas and
broken shards of the lamp.
When removing the lamp from a ceiling-mounted projector, make sure that no one is under the
projector. Glass fragments could fall if the lamp has been burned out.
！
IF A LAMP EXPLODES
If a lamp explodes, the gas and broken shards may scatter inside the projector and they may come
out of the exhaust vent. The gas contains toxic mercury.
Open windows and doors for ventilation.
If you inhale the gas or the shards of the broken lamp enter your eyes or mouth, consult the doctor
immediately.
Loosen the single screw
on the lamp compartment
cover.
1.
– 35 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Remove the lamp
compartment cover.
2.
Remove the three screws
from the lamp module.
3.
Lift the module handle up.
4.
Pull firmly on the module
handle to remove the lamp
module.
5.
Reverse steps 1 to 5 to
install the new lamp
module.
6.
While installing, align the
lamp module with the
connector and ensure it is
level to avoid damage.
Note:
The lamp module must sit
securely in place and the
lamp connector must be
connected properly before
tightening the screws.
— 36 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
Press the MENU button to open
the OSD menu.
1.
Press the cursor ◄► button to
2.
move to the Settings 2 menu.
Press the cursor button to move
down to Advanced 1 and press
enter.
Press the cursor ▼▲ button to
move down to Lamp Hour Reset.
3.
Press the cursor ► or Enter
button.
4.
A message screen appears.
Press ▼▲◄► buttons to reset
the lamp hour.
5.
Press the MENU button to get
back to Settings 2.
6.
– 37 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
Warning:
1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so
could result in a severe burn.
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings
on the projector.
3. If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated
room for several hours before using.
4. If a lot of water gets into the projector interior when cleaning, have the projector serviced.
Cleaning the Lens
You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the
projector lens.
1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to
the lens.)
2. Lightly wipe the lens in a circular motion.
Caution:
1. Do not use abrasive cleaners or solvents.
2. To prevent discoloration or fading, avoid getting cleaner on the projector case.
Cleaning the Case
Refer to the following to clean the projector case.
1. Wipe off dust with a clean dampened cloth.
2. Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and
then wipe the case.
3. Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
— 38 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Using the Kensington® Lock & Using the Security Bar
Using the Kensington® Lock
If you are concerned about security, attach the projector to a permanent object with the Kensington
slot and a security cable.
Note:
Contact your vendor for details on purchasing a suitable Kensington security cable.
The security lock corresponds to Kensington’s MicroSaver Security System. If you have any
comment, contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. Tel: 800-535-
Using the Security Bar
In addition to the password protection function and the Kensington lock, the Security Bar helps
protect the projector from unauthorized removal. See the following picture.
– 39 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
TROUBLESHOOTING
Common problems and solutions
These guidelines provide tips to deal with problems you may encounter while using the projector. If
the problem remains unsolved, contact your dealer for assistance.
Often after time spent troubleshooting, the problem is traced to something as simple as a loose
connection. Check the following before proceeding to the problem-specific solutions.
•
•
•
•
•
•
Use some other electrical device to confirm that the electrical outlet is working.
Ensure the projector is turned on.
Ensure all connections are securely attached.
Ensure the attached device is turned on.
Ensure a connected PC is not in suspending mode.
Ensure a connected notebook computer is configured for an external display.
(This is usually done by pressing an Fn-key combination on the notebook.)
Tips for Troubleshooting
In each problem-specific section, try the steps in the order suggested. This may help you to solve the
problem more quickly.
Try to pin point the problem and thus avoid replacing non-defective parts.
For example, if you replace batteries and the problem remains, put the original batteries back and go
to the next step.
Keep a record of the steps you take when troubleshooting: The information may be useful when
calling for technical support or for passing on to service personnel.
— 40 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
LED Error Messages
POWER LED
GREEN
LAMP LED
RED
TEMP LED
RED
ERROR CODE MESSAGES
Flashing
OFF
System Initial
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
Ready to Power on (Standby)
System Power on
Flashing
ON
OFF
OFF
Lamp Lit , System stable
Cooling
Flashing
ON
OFF
OFF
Over Temperature
4 blinks
5 blinks
5 blinks
5 blinks
5 blinks
5 blinks
5 blinks
5 blinks
5 blinks
5 blinks
OFF
Thermal Break Sensor error
Lamp Fail
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
1 blinks
2 blinks
3 blinks
4 blinks
5 blinks
6 blinks
7 blinks
8 blinks
Lamp Temperature shut down
Lamp Short circuit in output detected
Lamp End of lamp life detected
Lamp did not ignite
Lamp extinguished during normal operation
Lamp extinguished during run-up phase
Lamp voltage got error
Lamp ballast got error
Ballast watt value is out of range
(Lamp Normal & Eco mode)
5 blinks
9 blinks
OFF
5 blinks
6 blinks
6 blinks
6 blinks
7 blinks
8 blinks
9 blinks
10 blinks
1 blinks
2 blinks
3 blinks
OFF
Lamp ballast Communication error
Fan-1 error
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Fan-2 error
Fan-3 error
Case Open
OFF
DAD1000 error
Color wheel error
OFF
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before restarting
the projector. If the Power or Lamp LEDs are still blinking or any other situation that isn't listed in the chart
above, please contact your service center.
Image Problems
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
Problem: The image is blurred
1. Adjust the Focus on the projector.
2. Press the Auto button on the remote control.
3. Ensure the projector-to-screen distance is within the specified range.
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
– 41 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
1. Position the projector so it is as perpendicular to the screen as possible.
2. Use the Keystone button on the remote control to correct the problem.
Problem: The image is reversed
Check the Projection setting on the Settings 1 menu of the OSD.
Problem: The image is streaked
1. Set the Frequency and Tracking settings on the Image->Computer menu of the OSD to
the default settings.
2. To ensure the problem is not caused by a connected PC’s video card, connect to another
computer.
Problem: The image is flat with no contrast
Adjust the Contrast setting on the Image menu of the OSD.
Problem: The color of the projected image does not match the source image.
Adjust the Color Temperature and Gamma settings on the Image->Advanced menu of the
OSD.
Lamp Problems
Problem: There is no light from the projector
1. Check that the power cable is securely connected.
2. Ensure the power source is good by testing with another electrical device.
3. Restart the projector in the correct order and check that the Power LED is on.
4. If you have replaced the lamp recently, try resetting the lamp connections.
5. Replace the lamp module.
6. Put the old lamp back in the projector and have the projector serviced.
Problem: The lamp goes off
1. Power surges can cause the lamp to turn off. Re-plug power cord. When the Power LED
is on, press the power button.
2. Replace the lamp module.
3. Put the old lamp back in the projector and have the projector serviced.
Remote Control Problems
Problem: The projector does not respond to the remote control
1. Direct the remote control towards remote sensor on the projector.
2. Ensure the path between remote and sensor is not obstructed.
3. Turn off any fluorescent lights in the room.
4. Check the battery polarity.
5. Replace the battery.
6. Turn off other Infrared-enabled devices in the vicinity.
7. Have the remote control serviced.
Audio Problems
Problem: There is no sound
1. Adjust the volume on the remote control.
2. Adjust the volume of the audio source.
— 42 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
3. Check the audio cable connection.
4. Test the source audio output with other speakers.
5. Have the projector serviced.
Problem: The sound is distorted
1. Check the audio cable connection.
2. Test the source audio output with other speakers.
3. Have the projector serviced.
Having the Projector Serviced
If you are unable to solve the problem, you should have the projector serviced. Pack the projector in
the original carton. Include a description of the problem and a checklist of the steps you took when
trying to fix the problem: The information may be useful to service personnel. For servicing, return the
projector to the place you purchased it.
– 43 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
HDMI Q & A
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI
cable?
Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High-
Speed cables.
˙Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or
up to 2.25Gbps, which is the equivalent of a 720p/1080i signal.
˙High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of 340Mhz
or up to 10.2Gbps, which is the highest bandwidth currently available over an HDMI cable
and can successfully handle 1080p signals including those at increased color depths and/or
increased refresh rates from the Source. High-Speed cables are also able to accommodate
higher resolution displays, such as WQXGA cinema monitors (resolution of 2560 x 1600).
Q. How do I run HDMI cables longer than 10 meters?
There are many HDMI Adopters working on HDMI solutions that extend a cable’s effective
distance from the typical 10 meter range to much longer lengths. These companies
manufacture a variety of solutions that include active cables (active electronics built into
cables that boost and extend the cable’s signal), repeaters, amplifiers as well as CAT5/6 and
fiber solutions.
Q. How can I tell if a cable is an HDMI certified cable?
All HDMI products are required to be certified by the manufacturer as part of the HDMI
Compliance Test Specification. However, there may be instances where cables bearing the
HDMI logo are available but have not been properly tested. HDMI Licensing, LLC actively
investigates these instances to ensure that the HDMI trademark is properly used in the
market. We recommend that consumers buy their cables from a reputable source and a
company that is trusted.
For more detail information check http://www.hdmi.org/learningcenter/faq.aspx#49
— 44 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
SPECIFICATIONS
Specifications
Model
H1180HD
H1185HD
Display type
TI DMD 0.65" 1080p
Resolution
1080p 1920x1080
1.2 ~ 10 m
Projection distance
Projection screen size
Projection lens
Zoom ratio
25.9" ~ 324.97"
Manual Focus/Manual Zoom
1.5x
Vertical keystone
+/- 40 Degree
Projection methods
Front, Rear, Desktop/Ceiling (Rear, Front)
VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA, WUXGA, Mac
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NTSC, PAL, SECAM
Data compatibility
SDTV/EDTV/ HDTV
Video compatibility
H-Sync
2D: 15, 30~91.4KHz / 3D: 101.6KHz
24~30Hz, 47~120Hz
V-Sync
Safety certification
Operation temperature
Dimensions
FCC-B, cUL, UL, CE, C-tick, CCC, KC, PSE, PCT, CS, NOM
5° ~ 35°C
285 mm (W) x 261 mm (D) x 130 mm (H)
AC Universal 100-240V
AC Input
Power consumption
Lamp
240W, <0.5W(Stand By)
290W, <0.5W(Stand By)
190W (Boost) / 160W (Std)
240W (Boost) / 190W (Std)
Audio speaker
10W mono speaker
VGA x 1
Component (YPbPr RCAx3) x 1
Composite x 1
Input Terminals
S-Video x 1
HDMI x 2
PC Audio jack(3.5mm) x 1
RCA Stereo Audio LR x 1
PC Audio jack(3.5mm) x 1
RS-232C
Output Terminals
Control Terminals
Security
3D sync
Screen trigger: DC Jack x 1 (DC12V 200mA output function)
USB (Type mini B) - service only
USB (type A) support DC 5V
Kensington lock / Security Bar
Note: For questions regarding product specifications, please contact your local distributor.
– 45 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Projection Distance vs. Projection Size
Projection Distance and Size Table
H1180HD / H1185HD
PROJECTION
DISTANCE
（MM）
PROJECTION
DISTANCE
（MM）
IMAGE DIAGONAL
IMAGE WIDTH
(INCH)
IMAGE HIGHT
(INCH)
OFFSET-A
( MM )
（INCH）
FROM
TO
60
70
52.29
61.01
62.75
69.73
73.21
78.44
83.67
87.16
104.59
117.66
130.74
174.32
29.42
34.32
35.30
39.22
41.18
44.12
47.07
49.03
58.83
66.19
73.54
98.05
1846.3
2154.0
2215.6
2461.7
2584.8
2769.5
2954.1
3077.2
3692.6
4154.2
4615.8
6154.4
2776.1
3238.8
3331.3
3701.5
3886.6
4164.2
4441.8
4626.8
5552.2
6246.2
6940.3
9253.7
112.1
130.8
134.5
149.4
156.9
168.1
179.3
186.8
224.1
252.2
280.2
373.6
72
80
84
90
96
100
120
135
150
200
— 46 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Timing Mode Table
H-SYNC V-SYNC COMPOSITE
RGB
HDMI
SIGNAL RESOLUTION
COMPONENT
( KHZ )
( HZ )
S_VIDEO
(ANALOG) (DIGITAL)
NTSC
－
15.734
15.625
37.9
31.5
37.9
31.5
37.9
37.5
43.3
35.2
37.9
46.9
48.1
53.7
76.3
35.8
37.3
41.5
48.4
56.5
60
60
50
○
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
－
－
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
PAL/SECAM
VESA
－
○
640 x 400
720 x 400
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 576
1024 x 600
1024 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 720
1280 x 768
1280 x 768
1280 x 800
1280 x 800
1280 x 800
1280 x 800
1280 x 1024
1280 x 1024
85.08
70.1
85.04
60
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
72.8
75
85
56.3
60.3
75
72.2
85.1
120
60
60
65
60
70.1
75
68.7
97.6
99
85
120
120
75
67.5
45
60
90
120
60
47.4
47.8
49.7
62.8
71.6
101.6
64
59.9
59.8
74.9
84.9
119.9
60
80
75
– 47 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
H-SYNC V-SYNC COMPOSITE
RGB
HDMI
SIGNAL RESOLUTION
COMPONENT
( KHZ )
( HZ )
S_VIDEO
(ANALOG) (DIGITAL)
1280 x 1024
1280 x 960
1280 x 960
1360 x 768
1400 x 1050
1440 x 900
1440 x 900
1440 x 900
1600 x1200
1680 x 1050
1680 x 1050
1920 x 1200
1920 x 1080
640 x 480
91.1
60
85
60
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
－
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
85.9
47.7
65.3
55.5
55.9
70.6
75
85
○
60
○
60
○
59.9
59.9
75
○
○
○
60
○
64.7
65.3
74
59.9
60
○
○
60
○
67.5
35
60
○
66.7
74.5
74.9
75.1
60
○
832 x 624
1024 x 768
1152 x 870
480i
49.7
60.2
68.7
15.734
15.625
31.3
31.5
37.5
45
○
Apple
Macintosh
○
○
－
－
－
－
－
－
－
－
－
－
－
－
－
SDTV
EDTV
576i
50
○
576p
50
○
480p
60
○
720p
50
○
720p
60
○
1080i
33.8
28.1
27
60
○
1080i
50
○
HDTV
1080p
1080p
1080p
1080p
1080p
24
○
28
25
○
33.7
56.3
67.5
30
○
50
○
60
○
O：Frequency supported
—：Frequency not supported
The native resolution of the panel is 1920x1080
Resolution others than native resolution may be display with uneven size of text or line
The color of mean Displayable only. (4:3 only)
The color of mean may have a little noise is acceptable
HDTV timing main check tool is DVD player, VG828 is secondary
— 48 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
REGULATORY COMPLIANCE
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by the parties responsible for compliance could
void the user’s authority to operate the equipment.
Canada
This class B digital apparatus complies with Canadian ICES-003.
Safety Certifications
FCC-B, cUL, UL, CE, C-tick, CCC, KC, PSE, PCT, CS, NOM.
— 50 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
APPENDIX I
RS-232C Protocol
RS232 Setting
Baud rate:
9600
Parity
check:
None
Data bit:
Stop bit:
8
1
Flow
Control
None
Minimum delay for next command: 1ms
Control Command Structure
Header code
Command code Data code End code
HEX
ASCII
Command
Command
Data
Data
0Dh
CR
‘V’
Operation Command
Note:
XX=00-98, projector's ID, XX=99 is for all projectors
Return Result P=Pass / F=Fail
n: 0:Disable/1: Enable/Value(0~9999)
Command Group 00
ASCII
VXXS0001
VXXS0002
VXXS0003
HEX
Function
Description
Return Result
56h Xh Xh 53h 30h 30h 30h 31h 0Dh
56h Xh Xh 53h 30h 30h 30h 32h 0Dh
56h Xh Xh 53h 30h 30h 30h 33h 0Dh
Power On
P/F
Power Off
Resync
P/F
P/F
VXXG0004
VXXS0005n
56h Xh Xh 47h 30h 30h 30h 34h 0Dh
Get Lamp Hours
Pn/F
P/F
56h Xh Xh 53h 30h 30h 30h 35h nh 0Dh Set Air filter timer
n=0~999999
n=0~999999
VXXG0005
VXXS0006
56h Xh Xh 47h 30h 30h 30h 35h 0Dh
56h Xh Xh 53h 30h 30h 30h 36h 0Dh
Get Air filter timer
System Reset
Pn/F
P/F
0: Reset
1:Standby
2:Operation
3:Cooling
VXXG0007
56h Xh Xh 47h 30h 30h 30h 37h 0Dh
Get System Status
Pn/F
VXXG0008
VXXG0009
56h Xh Xh 47h 30h 30h 30h 38h 0Dh
56h Xh Xh 47h 30h 30h 30h 39h 0Dh
Get F/W Version
Get Alter EMail
Pn/F
Pn/F
VXXS0009n
56h Xh Xh 53h 30h 30h 30h 39h nh 0Dh Set Alter Email
P/F
– 51 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Command Group 01
Function
ASCII
VXXG0101
VXXS0101n
VXXG0102
VXXS0102n
VXXG0103
VXXS0103n
VXXG0104
VXXS0104n
VXXG0105
VXXS0105n
HEX
Description
Return Value
56h Xh Xh 47h 30h 31h 30h 31h 0Dh
56h Xh Xh 53h 30h 31h 30h 31h nh 0Dh Set Brightness
56h Xh Xh 47h 30h 31h 30h 32h 0Dh Get Contrast
56h Xh Xh 53h 30h 31h 30h 32h nh 0Dh Set Contrast
56h Xh Xh 47h 30h 31h 30h 33h 0Dh Get Color
56h Xh Xh 53h 30h 31h 30h 33h nh 0Dh Set Color
56h Xh Xh 47h 30h 31h 30h 34h 0Dh Get Tint
56h Xh Xh 53h 30h 31h 30h 34h nh 0Dh Set Tint
Get Brightness
n=0~100
Pn/F
n=0~100
n=0~100
n=0~100
n=0~100
n=0~100
n=0~100
n=0~100
0~31
P/F
Pn/F
P/F
Pn/F
P/F
Pn/F
P/F
56h Xh Xh 47h 30h 31h 30h 35h 0Dh
Get Sharpness
Pn/F
P/F
56h Xh Xh 53h 30h 31h 30h 35h nh 0Dh Set Sharpness
0~31
0:Warm
VXXG0106
VXXS0106n
56h Xh Xh 47h 30h 31h 30h 36h 0Dh
Get Color Temperature 1:Normal
2:Cold
Pn/F
P/F
0:Warm
56h Xh Xh 53h 30h 31h 30h 36h nh 0Dh Set Color Temperature 1:Normal
2:Cold
0:1.8
1:2.0C
2:2.2
3:2.4
4:B&W
5:Linear
0:1.8
1:2.0C
2:2.2
VXXG0107
VXXS0107n
56h Xh Xh 47h 30h 31h 30h 37h 0Dh
Get Gamma
Pn/F
P/F
56h Xh Xh 53h 30h 31h 30h 37h nh 0Dh Set Gamma
3:2.4
4:B&W
5:Linear
Command Group 02
ASCII
VXXS0201
VXXS0202
VXXS0203
VXXS0204
VXXS0205
VXXS0206
VXXS0207
HEX
Function
Description
Return Value
56h Xh Xh 53h 30h 32h 30h 31h 0Dh
56h Xh Xh 53h 30h 32h 30h 32h 0Dh
56h Xh Xh 53h 30h 32h 30h 33h 0Dh
56h Xh Xh 53h 30h 32h 30h 34h 0Dh
56h Xh Xh 53h 30h 32h 30h 35h 0Dh
56h Xh Xh 53h 30h 32h 30h 36h 0Dh
56h Xh Xh 53h 30h 32h 30h 37h 0Dh
Select RGB
P/F
P/F
P/F
P/F
P/F
P/F
P/F
Select RGB2
Select DVI
Select Video
Select S-Video
Select HDMI
Select BNC
Select
Component
VXXS0208
VXXS0209
56h Xh Xh 53h 30h 32h 30h 38h 0Dh
56h Xh Xh 53h 30h 32h 30h 39h 0Dh
P/F
P/F
Select HDMI 2(MEDIA)
Return
1:RGB
2:RGB2
3:DVI
4:Video
5:S-Video
6:HDMI
VXXG0220
56h Xh Xh 47h 30h 32h 32h 30h 0Dh
Get Current Source
Pn/F
7:BNC
8:Component
9:HDMI 2(MEDIA)
— 52 —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Command Group 03
Function
ASCII
HEX
Description
Return Value
0: Fill
1: 4:3
2: 16:9
VXXG0301
56h Xh Xh 47h 30h 33h 30h 31h 0Dh
Get Scaling
Pn/F
3: Letter Box
4: Native
5: 2.35:1
0: Fill
1: 4:3
2: 16:9
VXXS0301n
56h Xh Xh 53h 30h 33h 30h 31h nh 0Dh Set Scaling
P/F
3: Letter Box
4: Native
5: 2.35:1
VXXG0302
VXXS0302n
VXXG0303
VXXS0303n
VXXG0304
VXXS0304n
VXXG0305
VXXS0305n
VXXG0306
VXXS0306n
VXXG0307
VXXS0307n
56h Xh Xh 47h 30h 33h 30h 32h 0Dh
Blank
Pn/F
P/F
56h Xh Xh 53h 30h 33h 30h 32h nh 0Dh Blank
56h Xh Xh 47h 30h 33h 30h 33h 0Dh
Auto Keystone On
Pn/F
P/F
56h Xh Xh 53h 30h 33h 30h 33h nh 0Dh Auto Keystone On
56h Xh Xh 47h 30h 33h 30h 34h 0Dh
56h Xh Xh 53h 30h 33h 30h 34h nh 0Dh Freeze On
56h Xh Xh 47h 30h 33h 30h 35h 0Dh Volume
56h Xh Xh 53h 30h 33h 30h 35h nh 0Dh Volume
56h Xh Xh 47h 30h 33h 30h 36h 0Dh Treble
56h Xh Xh 53h 30h 33h 30h 36h nh 0Dh Treble
56h Xh Xh 47h 30h 33h 30h 37h 0Dh Bass
56h Xh Xh 53h 30h 33h 30h 37h nh 0Dh Bass
Freeze On
Pn/F
P/F
n=0~30
n=0~30
n=0~16
n=0~16
n=0~16
n=0~16
Pn/F
P/F
Pn/F
P/F
Pn/F
P/F
0:Front
1:Rear
VXXG0308
VXXS0308n
56h Xh Xh 47h 30h 33h 30h 38h 0Dh
Projection Mode
Pn/F
P/F
2: Ceiling
3: Rear+Ceiling
0:Front
1:Rear
2: Ceiling
3: Rear+Ceiling
56h Xh Xh 53h 30h 33h 30h 38h nh 0Dh Projection Mode
Set vertical keystone
VXXG0309
VXXS0309n
VXXG0310
VXXS0310n
56h Xh Xh 47h 30h 33h 30h 39h 0Dh
value
n=-40~+40
n=-40~+40
n=-20~+20
n=-20~+20
Pn/F
P/F
Set vertical keystone
56h Xh Xh 53h 30h 33h 30h 39h nh 0Dh
value
Set horizontal keystone
56h Xh Xh 47h 30h 33h 31h 30h 0Dh
value
Pn/F
P/F
Set horizontal keystone
56h Xh Xh 53h 30h 33h 31h 30h nh 0Dh
value
VXXG0311
VXXS0311n
VXXG0312
VXXS0312n
56h Xh Xh 47h 30h 33h 31h 31h 0Dh
56h Xh Xh 53h 30h 33h 31h 31h nh 0Dh Adjust the zoom
56h Xh Xh 47h 30h 33h 31h 32h 0Dh Adjust the focus
56h Xh Xh 53h 30h 33h 31h 32h nh 0Dh Adjust the focus
Adjust the zoom
n=-10~+10
n=-10~+10
n=-20~+20
n=-20~+20
Pn/F
P/F
Pn/F
P/F
Adjust the vertical lens
shift
Adjust the vertical lens
shift
Adjust the horizontal
lens shift
VXXG0313
VXXS0313n
VXXG0314
VXXS0314n
56h Xh Xh 47h 30h 33h 31h 33h 0Dh
56h Xh Xh 53h 30h 33h 31h 33h nh 0Dh
56h Xh Xh 47h 30h 33h 31h 34h 0Dh
56h Xh Xh 53h 30h 33h 31h 34h nh 0Dh
n=-20~+20
n=-20~+20
n=-20~+20
n=-20~+20
Pn/F
P/F
Pn/F
P/F
Adjust the horizontal
lens shift
– 53 –
Download from Www.Somanuals.com. All Manuals Search And Download.
|