Sylvania Portable DVD Player DP170SL9 User Manual

Owner’s Manual

Please read before using this unit.

DVD/CD Player

INSTRUCCIONES EN

ESPAÑOL INCLUIDAS.

DP170SL9

Supplied Accessories

Contents

PRECAUTIONS

remote control

(NB096UD)

RCA audio/video cables

(WPZ0102TM018 /

WPZ0102LTE01)

POWER

OPEN/CLOSE

MODE

DISPLA

AUDIO

SUBTITLE

ANGLE

Laser Safety ...............................................................................................2

Important Safeguards.............................................................. 3

Location and Handling .........................................................................4

Avoid the Hazards of Electrical Shock and Fire ...........................4

Moisture Condensation Warning......................................................4

About Copyright......................................................................................4

Notice for Progressive Scan Outputs...............................................4

Symbols Used in this Manual .............................................................4

Maintenance.............................................................................................4

REPEAT

CLEAR

HDMI

A-B

PAUSE

SKIP

SLOW

PLAY

REV

FWD

STOP

TOP MENU

SETUP

MODE

ZOOM

ENTER

batteries

(AA x 2)

owner’s manual

RETURN

Owner’s Manual

(1VMN25273)

About the Discs......................................................................... 5

Playable Discs...........................................................................................5

Unplayable Discs.....................................................................................5

SETUP

Connecting to RF Modulator (Not Supplied)

Connections.............................................................................. 6

Connection to a TV.................................................................................6

Connection to a TV with an HDMI Compatible Port..................7

Connection to an Audio System .......................................................8

Function Overview ................................................................... 9

Rear Terminals..........................................................................................9

Front Panel Display ................................................................................9

HDMI Setup...............................................................................................9

Remote Control ......................................................................................10

Installing the Batteries for the Remote Control..........................10

If your TV has antenna in jack only, it is still possible to

connect this unit to your TV by using an RF modulator. In

this case, follow the instructions below.

1) Disconnect the power cords of the devices from the AC

outlet.

2) Make the connection as illustrated below.

3) Set your RF modulator’s channel 3/4 switch to either

3 or 4, whichever the TV channel is least used in your

area. If your RF modulator has a modulator/antenna

switch, set it according to the manual supplied with the

RF modulator.

DVD FUNCTIONS

Playback .................................................................................. 11

MP3, JPEG Playback ................................................................ 12

Kodak Picture CD..................................................................... 12

Dual Playback.......................................................................... 13

Transition Mode ...................................................................... 13

Adjustment of Picture Size ...................................................... 13

Folder Playback....................................................................... 13

On-Screen Display ................................................................... 14

Search Functions ..................................................................... 15

Using Track Search ................................................................................15

Using Title / Chapter Search ..............................................................15

Using Time Search.................................................................................15

Marker Setting.........................................................................................15

4) Plug in the power cords of the devices to the AC outlet.

5) Turn on your TV and choose the same channel as

you set the RF modulator’s channel 3/4 switch to. For

more details, follow the manual supplied with the RF

modulator.

rear of this unit

CR/PR

COMPONENT VIDEO OUT

COAXIAL

Repeat / Random / Programmed Playback ............................ 16

Repeat Playback .....................................................................................16

Repeat A-B Playback.............................................................................16

Random Playback ..................................................................................16

Programmed Playback.........................................................................17

Special Settings ....................................................................... 17

Subtitle Language..................................................................................17

Audio Language.....................................................................................18

Camera Angles........................................................................................18

Black Level Setting.................................................................................18

Stereo Sound Mode ..............................................................................18

Virtual Surround .....................................................................................18

DVD Setting ............................................................................. 19

LANGUAGE Setting................................................................................19

DISPLAY Setting......................................................................................20

AUDIO Setting.........................................................................................21

PARENTAL Setting .................................................................................22

OTHERS Setting.......................................................................................23

Reset to the Default Setting (Except for PARENTAL Setting) 23

AUDIO

OUT

VIDEO

OUT

DIGITAL

CB/PB

HDMI OUT

AUDIO OUT

RCA video cable

rear of TV

AUDIO

OUT

VIDEO

OUT

RCA audio cable

ANT. IN

rear of your RF

modulator

VHF / UHF

antenna

RF coaxial cable

ANT. IN CHANNEL

AUDIO IN VIDEO IN TO TV

RF coaxial

cable

cable TV

company

Set channel 3 or 4

Note:

• RF modulator is not supplied with this unit. You need to

purchase it at your local store.

• The quality of picture may become poor if this unit is

connected to an RF modulator.

INFORMATION

Troubleshooting Guide ........................................................... 24

Specifications .......................................................................... 25

Language Code List ................................................................. 25

LIMITED WARRANTY................................................................ 25

Español .................................................................................... 27

Quick Use Guide............................................................ Back Cover

If you need additional operating assistance after

reading this owner’s manual, please call

TOLL FREE : 1-800-968-3429

or visit our web site at

http://www.sylvania-ce.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safeguards

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

12. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should

be followed.

5. Cleaning - Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

13. Lightning - For added protection for this video product

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet. This will prevent damage to the video product due to

lightning and power-line surges.

14. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touching

such power lines or circuits as contact with them might be

fatal.

15. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

16. Object and Liquid Entry - Never push objects of any kind into

this video product through any openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on the

video product.

17. Servicing - Do not attempt to service this video product

yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

EXCEPTION: A product that is meant for uninterrupted service

and, that for some specific reason, such as the possibility of

the loss of an authorization code for a CATV converter, is not

intended to be unplugged by the user for cleaning or any

other purpose, may exclude the reference to unplugging the

appliance in the cleaning description otherwise required in

item 5.

6. Attachments - Do not use attachments not recommended by

the video product manufacturer as they may cause hazards.

7. Water and Moisture- Do not use this video product near

water, for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool,

and the like.

PORTABLE CART WARNING

(Symbol provided by RETAC)

8. Accessories - Do not place this video

product on an unstable cart, stand, tripod,

bracket, or table. The video product may

fall, causing serious injury to a child or

adult, and serious damage to the appliance.

18. Damage Requiring Service - Unplug this video product

from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

Use only with a cart, stand, tripod, bracket,

S3125A

or table recommended by the manufac-

turer, or sold with the video product. Any mounting of the

appliance should follow the manufacturer's instructions

and should use a mounting accessory recommended by the

manufacturer. An appliance and cart combination should be

moved with care. Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart combination to

overturn.

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by

following the operating instructions. Adjust only those

controls that are covered by the operating instructions

as an improper adjustment of other controls may result

in damage and will often require extensive work by a

qualified technician to restore the video product to its

normal operation.

9. Ventilation - Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the video

product and to protect it from overheating, and these

openings must not be blocked or covered.

The openings should never be blocked by placing the video

product on a bed, sofa, rug, or other similar surface. This video

product should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

10. Power Sources - This video product should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your

home, consult your appliance dealer or local power company.

For products intended to operate from battery power, or

other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the

plug. If the plug should still fail to fit, contact your electri-

cian to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

e. If the video product has been dropped or damaged in any

way.

f. When the video product exhibits a distinct change in

performance this indicates a need for service.

19. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same characteris-

tics as the original part. Unauthorized substitutions may result

in fire, electric shock or other hazards.

20. Safety Check - Upon completion of any service or repairs

to this video product, ask the service technician to perform

safety checks to determine that the video product is in proper

operating condition.

21. Heat - This video product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or

climbing on it. A falling unit can cause serious injury or even death.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Location and Handling

Maintenance

•

Do not stand this unit up vertically. Install this unit in a

Servicing

horizontal and stable position. Do not place anything directly on

top of this unit. Do not place this unit directly on top of the TV.

• Please refer to relevant topics on the “Troubleshooting Guide”

on page 24 before returning the product.

• If this unit becomes inoperative, do not try to correct the

problem by yourself. There are no user-serviceable parts inside.

Turn off, unplug the power plug, and please call our toll free

customer support line found on the cover of this manual to

locate an authorized service center.

• Depending on the TV, noise or disturbance of the picture and/or

sound may be generated if this unit is placed too close to your

TV. In this case, please ensure enough space between your TV

and this unit.

• Do not cover or place this unit in enclosed spaces to

prevent excessive temperature build up.

•

Do not place this unit in direct sunlight, or near heat sources.

Cleaning the Cabinet

• Use a soft cloth slightly moistened with a mild detergent

solution. Do not use a solution containing alcohol, spirits,

ammonia or abrasive.

• Depending on the environment, the temperature of this unit

may increase slightly. This is not a malfunction.

• Keep this unit away from strong magnetic objects.

• Do not place any object containing water or other liquids on

this unit. In the event that liquid should enter the cabinet,

unplug this unit immediately and contact the retailer or an

authorized service center immediately.

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning cloth. Wipe

the disc from the center to out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner, commercially

available cleaners, detergent, abrasive cleaning agents or anti-

static spray intended for analog records.

• Do not remove this unit cabinet. Touching parts inside the

cabinet could result in electric shock and/or damage to this unit.

For service and adjustment inside the cabinet, call a qualified

dealer or an authorized service center.

• Be sure to remove disc and unplug the AC power cord from the

output before carrying this unit.

Cleaning the Disc Lens

• If this unit continues to perform improperly even after

you have referred to the relevant sections and to the

“Troubleshooting Guide” in this manual, the laser optical pickup

unit may be dirty. Consult your dealer or an authorized service

center for inspection and cleaning of the laser optical pickup

unit.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from AC

outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug the power

cord immediately and take the unit to our authorized service

center for servicing.

Disc Handling

• When you handle a disc, hold it by its edge and try not to touch

the surface of the disc.

• Always store the disc in its protective case when not in use.

Moisture Condensation Warning

Moisture may form inside this unit under the following conditions:

• Immediately after a heater is turned on.

• In a steamy or humid room.

copied, transmitted, disseminated, transcribed, downloaded or

stored in any storage medium, in any form or for any purpose

without the express prior written consent of Funai. Furthermore,

any unauthorized commercial distribution of this manual or any

revision hereto is strictly prohibited.

• When this unit is suddenly moved from a cold to warm environ-

ment.

If moisture forms inside this unit, it may not operate properly or

damage the disc. In such case, do not use this unit at least for 2

hours until its inside gets dry.

Information in this document is subject to change without

notice. Funai reserves the right to change the content herein

without the obligation to notify any person or organization of

such changes.

About Copyright

Unauthorized copying, broadcasting, public performance and

lending of discs are prohibited.

This product incorporates copyright protection technology that

is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

with the

design is a registered trademark of Funai

Electric Co., Ltd and may not be used in any way without the ex-

press written consent of Funai. All other trademarks used herein

remain the exclusive property of their respective owners. Noth-

ing contained in this manual should be construed as granting, by

implication or otherwise, any license or right to use any of the

trademarks displayed herein. Misuse of any trademarks or any

other content in this manual is strictly prohibited. Funai shall

aggressively enforce its intellectual property rights to the fullest

extent of the law.

Notice for Progressive Scan Outputs

Consumers should note that not all high definition television sets

are fully compatible with this product and may cause artifacts to

be displayed in the picture. In case of picture problems with 525

progressive scan output, it is recommended that the user switch

the connection to the ‘standard definition’ output. If there are

questions regarding your TV set compatibility with this 525p DVD

player, please contact our customer service center.

Manufactured under license

from Dolby Laboratories. “Dolby”

and the double-D symbol are

trademarks of Dolby Laboratories.

Symbols Used in this Manual

Product that have earned ENERGY STAR® are

designed to protect the environment through

superior energy efficiency.

The following symbols appear in some headings in this manual.

Description refers to DVD-video.

: Description refers to audio CD.

: Description refers to CD-RW/-R with MP3 files.

: Description refers to CD-RW/-R with JPEG files.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

About the Discs

Playable Discs

Type of

Recorded

signals

Mark (logo)

Region code

Media size

Disc types

title 1

media

DVD-video

*1, 2, 3, 5, 9

e.g.)

5 inches

(12 cm)

3 inches

(8 cm)

title 2

chapter 1 chapter 2 chapter 3 chapter 4 chapter 1

digital video

(MPEG2)

chapter 2

DVD-RW

DVD-R

*1, 3, 4, 5, 6,

7,8, 9, 10

audio CD

e.g.)

audio CD

*3, 5, 9

digital audio

track 1

track 2

track 3

track 4

track 5

track 6

5 inches

(12 cm)

3 inches

(8 cm)

digital audio

CD-RW

CD-R

*3, 4, 5, 8, 9

MP3

JPEG

e.g.)

folder 1

folder 2

JPEG

ﬁle 1

ﬁle 2

ﬁle 3

ﬁle 4

ﬁle 5

ﬁle 6

Kodak

Picture CD

*3, 4, 5, 8, 9

JPEG

is a trademark of DVD Format/Logo Licensing Corporation.

is trademark of Eastman Kodak Company.

If you cannot play back a disc which bears one of the marks above, check the following.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.

*2: Certain DVD-video does not operate as described in this manual due to the intentions of the disc’s producers.

*3: Scratched or stained discs may not be played back.

*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special prop-

erties of discs.

*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if

they are played back, the sound or video quality will be compromised.

*6: You may play back the unfinalized DVD-RW/-R recorded in the video format on our brand’s DVD recorder. However, depending

on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,

etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.

*7: Only discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all (the

picture or sound may not be smooth, etc.).

*8: If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly.

*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.

*10: Discs recorded in the VR (video recording) format cannot be played back.

Unplayable Discs

NEVER play back the following discs as malfunction may result!

DVD-RAM, DVD-audio, CD-i, photo CD, DVD with region codes other than 1 or ALL, DTS-CD, DVD-ROM for personal computers, CD-ROM

for personal computers, HD DVD, Blu-ray Disc

On the following disc, the sound MAY NOT be heard.

super audio CD

Note:

• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer

cannot be delivered.

Any other discs without compatibility indications

–

Download from Www.Somanuals.com. All Manuals Search And Download.

SETUP

Connections

Connection to a TV

analog audio

standard picture

good picture

better picture

COMPONENT

VIDEO IN

COMPONENT

VIDEO IN

AUDIO IN

S-VIDEO IN

VIDEO IN

and

RCA audio cable

RCA video cable

S-video cable

component video cable

This unit

CR/PR

COMPONENT VIDEO OUT

COAXIAL

CR/PR

COMPONENT VIDEO OUT

COAXIAL

AUDIO

OUT

VIDEO

OUT

DIGITAL

CB/PB

HDMI OUT

AUDIO OUT

AUDIO

OUT

VIDEO

OUT

AUDIO

OUT

VIDEO

OUT

DIGITAL

AUDIO

OUT

VIDEO

OUT

S-VIDEO

OUT

B/P

B/PB

HDMI OUT

CB/PB

AUDIO OUT

COMPONENT

VIDEO OUT

AUDIO OUT

VIDEO OUT

S-VIDEO OUT

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

Note:

• Connect this unit directly to your TV. If RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy

protection system.

If your TV is compatible with 525(480) progressive scanning and you want to enjoy that high quality picture;

You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set

“PROGRESSIVE” to “ON” in “DISPLAY” menu, so that the P.SCAN on the front panel display lights up. Refer to pages 19-20 for more

details.

• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at

all.

If your TV is not compatible with progressive scanning;

Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding [PLAY B] on

the front of the unit for more than 5 seconds, so that the P.SCAN on the front panel display turns off.

After connecting to your TV:

You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.

Please refer to your TV’s owner’s manual for details.

Input modes for common TV brands:

Listed below are inputs for common brand name TV’s.

Admiral:

Curtis Mathis:

GE:

AUX

Panasonic:

RCA:

TV/VIDEO

LINE1, LINE2, 00, 90, 91, 92, 93

INPUT, TV/VCR, 00, 90, 91, 92, 93

Samsung:

Sanyo:

TV/VIDEO

Hitachi:

INPUT, AUX

VIDEO

JVC:

VIDEO, VIDEO1, VIDEO2, VIDEO3

Sharp:

Sony:

Toshiba:

Zenith:

Kenwood:

LXI-Series:

Magnavox:

AUX

VIDEO1, VIDEO2, VIDEO3

TV/GAME

AUX CHANNEL

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to a TV with an HDMI Compatible Port

A simple 1-cable connection with a device having an HDMI (High-Definition Multimedia Interface) connector allows digital transfer both

digital video signals and multi-channel audio signals.

best picture

HDMI IN

HDMI cable

This unit

HDMI OUT

When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you

do not need the analog audio connection described on page 6.

Cables not included.

Please purchase the necessary cables at your local store.

Actual output modes by media

DOLBY DIGITAL Setting

Audio Recording Format

Dolby Digital

BITSTREAM *1

Dolby Digital

2channel PCM

PCM

2channel PCM

DVD-video

LPCM

audio CD

MP3

*1 If the connected device is not compatible with HDMI BITSTREAM, signals are output on PCM.

To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device

(or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP

is copy protection technology that comprises data encryption and authentication of the connected AV device.

This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.

*HDMI: High Definition Multimedia Interface

Note:

• When using an HDCP-incompatible display device, the image will not be viewed properly.

• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this unit cannot

be controlled by another device via the HDMI connector.

• The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the device that is

connected.

• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device

such as this, audio signals are not output from the HDMI output connector.

• When the set’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable,

the signals are output in digital RGB.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to an Audio System

Analog Audio Connection

stereo system

Digital Audio Connection

Dolby Digital decoder,

MD deck or DAT deck

Audio

COAXIAL

analog audio

input jacks

digital audio

input jack

RCA audio cable

digital audio coaxial cable

This unit

CR/PR COMPONENT VIDEO OUT

COAXIAL

CR/PR

COMPONENT VIDEO OUT

AUDIO

OUT

VIDEO

OUT

DIGITAL

COAXIAL

CB/PB

HDMI OUT

AUDIO OUT

AUDIO

OUT

VIDEO

OUT

B/PB

AUDIO

OUT

VIDEO

OUT

DIGITAL

HDMI OUT

B/PB

AUDIO OUT

DIGITAL AUDIO OUT

Setting

SETUP > QUICK >

DOLBY DIGITAL

Connection

Connecting to a Dolby Digital decoder

for Dolby Digital audio output.

Supplied cables used in this connection are as

follows:

BITSTREAM

• RCA audio cable (L/R) x 1

Connecting to other device (an MD deck

or DAT deck etc.) without Dolby Digital

decoder.

Please purchase the rest of the necessary cables at

your local store.

PCM

* To complete these settings, refer to pages 19-21.

Note:

• The audio source on a disc in a Dolby Digital multi channel

surround format cannot be recorded as digital sound by an MD

or DAT deck.

• By hooking this unit up to a Dolby Digital decoder, you can

enjoy high-quality Dolby Digital multi channel surround sound

as heard in the movie theaters.

• Playing back a DVD using incorrect settings may generate

noise distortion and may also damage the speakers.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Function Overview

Rear Terminals

CR/PR

COMPONENT VIDEO OUT

COAXIAL

DIGITAL

AUDIO

OUT

VIDEO

OUT

S-VIDEO

OUT

HDMI OUT

CB/PB

AUDIO OUT

1: AUDIO OUT jacks

5: DIGITAL AUDIO OUT COAXIAL jack

Connect a digital audio coaxial cable from here to the digital

audio input jack of your digital audio receiver.

6: VIDEO OUT jack

Connect an RCA audio cable from here to the audio input jack of

your television or audio device.

2: COMPONENT VIDEO OUT jacks

Connect component video cables from here to the component

video input jacks of your television.

Connect an RCA video cable from here to the video input jack of

your television.

3: S-VIDEO OUT jack

Note:

Connect an S-video cable from here to the S-video input jack of

your television.

•

Please purchase the necessary cables at your local store.

(Refer to pages 6-8.)

4: HDMI OUT jack

Connect an HDMI cable from here to the HDMI compatible port

of a television or other display device.

Front Panel Display

POWER

SKIP

PLAY

SKIP

STOP

OPEN/CLOSE

Power on

PROGRESSIVE DVD/CD PLAYER

No disc inserted or

cannot read

Displays a type of the disc

which is inserted on the tray.

• DVD: DVD

Tray open

Lights up when the

A-B repeat function

is on.

• CD: audio CD, MP3, Kodak Picture CD

Tray closed

Loading the disc

Power oﬀ

Lights up when the

repeat function is on.

Lights up when the

progressive scan

system is activated.

GROUP

P.SCAN

DVD

HDMI output mode

(480p) is selected

Lights up when

the ALL repeat

function is on.

Displays how long the current title or track

has been played back. When a chapter or track is

switched, the number of a new title,

chapter or track is displayed.

HDMI output mode

(720p) is selected

Lights up when the

inserted disc comes

to a pause.

HDMI output mode

(1080i) is selected

Selected HDMI output mode is displayed.

Lights up when the inserted

disc is being played back.

HDMI output mode

(1080p) is selected

Lights up when playing back

in slow mode. (DVD)

HDMI output mode

(OFF) is selected

HDMI Setup

Press [HDMI] on the remote control to select the HDMI output

mode. The output mode changes as follows every time [HDMI] is

pressed.

Note:

• Video and audio signals may distorted temporarily when

switching to/from the HDMI output mode.

• Use a display with an HDMI-compatible port.

• You can check the HDMI connection status by pressing

[DISPLAY] during playback with the HDMI output mode (refer

to page 14).

480P

720P

1080I

1080P

hdOFF

• The HDMI output mode that is not supported by the TV will be

skipped.

480P (Default): Video output from the HDMI OUT jack at 480p.

720P: Video output from the HDMI OUT jack at 720p.

1080I: Video output from the HDMI OUT jack at 1080i.

1080P: Video output from the HDMI OUT jack at 1080p.

hdOFF: No video output from the HDMI OUT connector.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

Disc

Button

(Alphabetical order)

OPEN/CLOSE

POWER

DISPLAY

MODE

• To select chapter or title directly.

• To select track or file directly.

AUDIO

SUBTITLE

• To search forward/

backward through a disc.

• To begin slow forward/

reverse playback in the pause mode.

•

To search forward/backward through a disc.

(CD/MP3)

REV

FWD

ANGLE

REPEAT

CLEAR

PAUSE

SLOW

HDMI

SKIP

ENTER

• To move the cursor and determine its

position.

• To move the cursor and determine its

position.

PLAY

REV

FWD

STOP

TOP MENU

A-B

•

To repeat between your chosen point of A

and B.

•

To repeat between your chosen point A and

B. (CD)

SETUP

MODE

ZOOM

ENTER

ANGLE

AUDIO

• To select camera angles on a disc.

• To select audio language on a disc.

• To rotate a picture. (JPEG)

RETURN

• To select “STEREO”, “L-ch” or “R-ch”. (CD)

• To clear the markers. (CD)

• To clear the markers.

• To clear the numbers entered incorrectly.

• To cancel the point for A-B repeat.

CLEAR

• To remove status number in program input.

• To clear the numbers entered incorrectly.

• To cancel the point for A-B repeat. (CD)

DISPLAY

HDMI

• To display the current disc mode.

• To set the HDMI signal output.

• To call up the menu on a disc.

• To display the current disc mode.

• To set the HDMI signal output.

• To call up the file list. (MP3/JPEG)

Installing the Batteries for the

Remote Control

• To arrange the playing order or play

randomly. (CD)

MODE

Install two AA batteries (supplied) matching

the polarity indicated inside battery

compartment of the remote control.

• To set black level on/off.

• To set virtual surround on/off. (CD/MP3)

• To activate the slide show mode. (JPEG)

• To set virtual surround on/off.

OPEN/CLOSE

PAUSE

• To open or close the disc tray.

• To turn on the unit.

• To open or close the disc tray.

• To turn on the unit.

• To pause disc playback.

• To advance playback one frame at a time.

• To pause disc playback.

• To begin disc playback.

• To turn on the unit.

• To begin disc playback.

• To turn on the unit.

PLAY

Keep in mind the following when using

the remote control:

POWER

• To turn the unit on/off.

•

Make sure that there are no obstacles

between the remote control and the infra-

red sensor window on the unit.

• To play back a track or disc repeatedly. (CD)

• To play back a file, folder or disc repeatedly.

(MP3/JPEG)

REPEAT

RETURN

• To play back a chapter or title repeatedly.

• The maximum operable ranges from the

unit are as follows.

• To return to the previous operation in

menu.

• To return to the previous operation in

menu.

- Line of sight: approx. 23 feet (7m)

- Either side of center:

approx. 16 feet (5m) within 30°

- Above: approx. 16 feet (5m) within 15°

- Below: approx. 10 feet (3m) within 30°

MODE

• To search tracks.

• To search chapter, title or time.

• To set or search the markers.

• To search time. (CD)

• To set or search the markers. (CD)

SETUP

SKIP

• To call up the setup menu.

• To skip chapters or titles.

• To stop playback.

• To skip tracks.

• To stop playback.

------

POWER

SKIP

PLAY

SKIP

STOP

OPEN/CLOSE

STOP

PROGRESSIVE DVD/CD PLAYER

SUBTITLE

• To select subtitles on a disc.

• To return to the top file in the highest

hierarchy of the program and the file list.

(MP3/JPEG)

TOP MENU

ZOOM

• To call up the top menu on a disc.

• To magnify part of a picture. (2x/4x)

Note:

• To magnify part of a picture. (x2) (JPEG)

• Do not mix alkaline and manganese

batteries.

• Do not mix old and new batteries.

• Always remove batteries from remote

control if they are dead or if the

remote control is not to be used for

an extended period of time. This will

prevent battery acid from leaking into

the battery compartment.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD FUNCTIONS

Please note : most instructions in this manual refer to remote control use.

Playback

Before:

POWER

OPEN/CLOSE

Turn on the TV, amplifier and any other

components which are connected to this

unit. Make sure the TV and audio receiver

(not supplied) are set to the correct channel.

MODE

DISPLAY

POWER

SKIP

PLAY

SKIP

STOP

OPEN/CLOSE

AUDIO

SUBTITLE

ANGLE

REPEAT

PROGRESSIVE DVD/CD PLAYER

CLEAR

HDMI

SKIP

PAUSE

SLOW

(

on page 12

)

PLAY

REV

FWD

STOP

To open the disc

tray

Insert a disc with

label facing up.

Note:

• When you play back a CD-RW/-R with MP3/JPEG files, details on page 12.

“

”

•

may appear at the top-right on the TV screen when the operation is

OPEN/CLOSE

POWER

prohibited by the disc or this unit.

• Some DVD may be played from title 2 or 3 due to specific programs.

• During the playback of a 2-layered disc, pictures may stop for a moment. This happens

while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

• You can change the on-screen language for DVD function in “PLAYER MENU” menu. Refer

to page 19.

To start playback

To stop playback

STOP

PLAY

• When the unit is connected with an HDMI cable, a revocation list update screen may

appear when you try to play back the DVD-video containing a revocation list.

• If the unit is connected to the unauthorized display device with an HDMI cable, the audio/

video signal may not be output when playing back a commercial DVD-video.

Disc Menu

Paused and Step-by-Step Playback

Some discs contain menus which allow you to customize DVD

playback. Use [K / L / s / B] to select an item, then press

[ENTER] (or [PLAY B]).

Press [PAUSE F] during playback.

To continue playback, press [PLAY B].

Calling Up a Menu Screen during Playback

The disc goes forward by one frame each time [PAUSE F] is

pressed in the pause mode.

To continue playback, press [PLAY B].

• Press [MENU] to call up the disc menu.

• Press [TOP MENU] to call up the title menu.

Note:

• For DVD, set “STILL MODE” to “FIELD” in “DISPLAY” menu if

pictures in the pause mode are blurred. Refer to pages 19-20.

Note:

• Menu operations may vary depending on the disc. Refer to the

manual accompanying the disc for details.

To use [SKIP H]], [SKIP G] on this unit

Resume Playback

Press once to skip chapters, tracks or titles to a desired point.

Press [STOP C] during playback. Resume message will appear on

the TV screen.

Fast Forward / Reverse Search

Press [PLAY B], playback will

Resume ON

resume from the point at which

Press [FWD g] or [REV h] repeatedly during

playback to select the required forward or reverse

speed.

Press 'PLAY' to play from here.

playback was stopped.

To play the beginning,

press 'STOP' first and then 'PLAY'.

To use [SKIP H]], [SKIP G] on this unit

e.g.) DVD

Pressing and holding [SKIP H]] or [SKIP G] on this unit will also

change forward or reverse playback speed.

Note:

To continue playback, press [PLAY B].

• To cancel resume, press [STOP C] one more time in the stop

mode.

Note:

• For MP3 and JPEG, playback will resume from the beginning of

the track at which playback was stopped.

• The resume information will be kept when the unit is turned

off.

•

For DVD, fast forward or reverse search speed is different

depending on the disc. Approximate speed is 1(2x), 2(8x), 3(20x),

4(50x), 5(100x).

• For audio CD and MP3, approximate speed is 1(2

x), 2(8x),

3(30 ).

–

Download from Www.Somanuals.com. All Manuals Search And Download.

This unit recommends the files recorded under the following

circumstances:

Slow Forward / Reverse Search

Applicable MP3 file

Remarks

Press [FWD g] or [REV h] repeatedly in the

Sampling frequency:

44.1 kHz or 48 kHz

pause mode to select the required forward or reverse speed.

• For MP3 file recorded in VBR

(variable bit rate), the unit

may not display the actual

elapsed time.

To use [SKIP H]], [SKIP G] on this unit

Pressing and holding [SKIP H] or [SKIP G] on this unit in the

pause mode will also change forward or reverse playback speed.

To continue playback, press [PLAY B].

Constant bit rate:

32 kbps ~ 320 kbps

Applicable JPEG file

Remarks

Note:

• Slow forward or reverse speed is different depending on the

disc. Approximate speed is 1(1/16x), 2(1/8x), 3(1/2x).

• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in

the slow playback mode are blurred. Refer to pages 19-20.

Normal playback

Upper limit: 6,300 x 5,100

Pixel lower limit: 32 x 32 pixel

File size: Max. 7 MB

• A JPEG image that extends

beyond the screen is

reduced so that it will be dis-

played within the screen.

Zoom

Dual playback

Upper limit: 5,000 x 5,000

Pixel lower limit: 32 x 32 pixel

File size: Max. 5 MB

1) Press [ZOOM] during playback.

2) Press [ZOOM] repeatedly to select the required zoom factor:

2x, 4x or off.

Note:

•

Depending on some sections, it may take a while to be

recognized.

• Press [TOP MENU] to return to the first item.

• Folders and MP3 and JPEG files are displayed respectively as

and

• A maximum of 255 folders or 999 files may be recognized on

one disc.

3) Press [K / L / s / B] to slide the zoomed picture across the TV

screen.

4) To exit zoom mode, press [ZOOM] to select off.

• Up to 8 hierarchies can be recognized in one folder. File in the

9th or deeper hierarchies cannot be played back.

Kodak Picture CD

Note:

• Zoom function does not work while the disc menu is

displayed.

• 4x zoom is not available on some discs.

• Only 2x Zoom is available on JPEG.

This unit can also run JPEG files stored on Kodak Picture CD. The

picture CD is a service to convert photographs taken by a conven-

tional film camera into digital data and write the data on a CD.

The user can enjoy picture images on the television set by playing

back the picture CD. For details of Kodak Picture CD, contact a

shop that deals with developing service of Kodak Inc.

• In the zoom mode, it automatically changes

zoomed position guide.

x2 (x4) to the

• You cannot slide the zoomed picture on some JPEG files.

MP3, JPEG Playback

MP3 or JPEG is a method of compressing files. You can copy MP3

or JPEG files on CD-RW/-R from the computer and play back the

files on this unit.

When selecting the file :

Picture 1

Picture 2

Picture 3

To select a desired track

Picture 4

Picture 5

1/32

Picture 6

Current track number /

the number of total tracks

Insert a CD-RW/-R with MP3/JPEG files, the file list will automatically

appear on the TV screen. Press [MENU] when you want to call up

the file list again while CD-RW/-R with MP3 files is already inserted.

To play back

ENTER

PLAY

When selecting the folder:

FILE LIST

DISC NAME

FOLDER

MP3

ENTER

• If a Kodak Picture CD file is selected, an image will be

played back from the selected track and go to the next

one in turn.

JPEG

folder name

PLAY

folder name

file name

ENTER

PLAY

folder name

• Press [STOP C] to stop playback.

• If all menu items cannot be displayed in the TV screen,

“G” appears at the right bottom of the screen,

indicating that the user can view remaining items on the

next page. “H” appears, it indicates that the user can

view other items on the previous page. The track number

of the currently highlighted item and the total tracks are

shown at the center bottom of the screen.

• Press [B] when you want to go to the next hierarchy.

• Press [s] when you want to go back to the previous

hierarchy (except for the top hierarchy).

Press [STOP C] once to stop

playback temporarily.

• If “G” is shown at the right bottom, use [SKIP G] to

view the next page. If “H” is shown at the left bottom,

use [SKIP H] to view the previous page.

STOP

• It may take some time until all menu items are displayed

on the menu screen.

Refer to “Resume

Playback” on page

11.

Note:

•

A track is displayed for 5 seconds and then the next track is

displayed.

• Every press on [ANGLE] will turn the image clockwise by 90

degrees when an image is displayed.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Dual Playback

Adjustment of Picture Size

This unit allows you to play back MP3 and JPEG files

simultaneously. Available only when “DUAL PLAYBACK” is “ON”.

Refer to pages 19-23 on how to set “DUAL PLAYBACK” to “ON” or

“OFF”.

Depending on the TV connected to this unit, the overall picture

cannot be displayed and the edge of the picture can be cut off. In

this case, you can adjust the size of the JPEG playback image on

screen.

Press [MENU] during MP3/JPEG

During playback, press [MODE] repeatedly until “

”

FILE LIST

playback.

appears.

DISC NAME

FOLDER

MP3

JPEG

folder name

NORMAL

MODE

folder name

PLAY

file name

PLAY

ENTER

PLAY

folder name

To switch “NORMAL” or “SMALL”.

To select a desired MP3 or JPEG file from the FILE LIST.

ENTER

SMALL

ENTER

PLAY

NORMAL:

To display the image at 100% of the picture size.

SMALL:

Note:

To display the image at 95% of the picture size.

•

To cancel dual playback, press [MENU] again at step 1.

Press [RETURN ] to exit.

RETURN

• If you press [PLAY B] directly after you inserted a disc which

contains both MP3 and JPEG files and if the “DUAL PLAYBACK”

setting is “ON”, dual playback will start automatically.

• If you press [FWD g] or [REV h] during dual playback, a

JPEG file will be paused.

Note:

• Zooming or rotating a JPEG file during dual playback may cause

an intermittent sound.

• Depending on the data size of each file, dual playback may not

function properly. (Refer to “Applicable JPEG file” on page 12.)

•

The setting screen will not be displayed while in the stop mode

or from the file list.

• This feature may have no effect on some files (e.g. Files with

small picture size).

• The default setting is “NORMAL”.

Transition Mode

Folder Playback

You can switch to the transition mode for JPEG files during

playback.

This unit allows you to play back all the files and tracks contained

in one selected folder automatically.

If the folder contains both MP3 and JPEG files, the dual playback

will begin automatically within that folder.

Available only when “DUAL PLAYBACK” is “ON”. Refer to pages

19-23 on how to set “DUAL PLAYBACK” to “ON” or “OFF”.

During playback, press [MODE] repeatedly until “

”

appears.

CUT IN/OUT

MODE

PLAY

Press [STOP C] once to stop MP3

FILE LIST

To switch “CUT IN/OUT” or “FADE IN/OUT”.

DISC NAME

FOLDER

MP3

or JPEG playback.

JPEG

folder name

FADE IN/OUT

ENTER

folder name

STOP

file name

ENTER

PLAY

folder name

File list will appear.

CUT IN/OUT:

The entire image appears in one time.

FADE IN/OUT:

Press [MODE] once.

FOLDER LIST

DISC NAME

FOLDER

MODE

The image appears gradually and then disappears.

folder name

ALL

Press [RETURN ] to exit.

ENTER

PLAY

RETURN

Folder list will appear.

folder name

To select a desired folder from the folder list.

Note:

•

The transition mode cannot be switched when it is stopped, or

from the file list screen or the picture CD menu screen.

ENTER

PLAY

• The default setting is “CUT IN/OUT”.

Note:

•

To cancel folder playback, press [MODE] again at step 2.

• If you press [FWD g] or [REV h] during folder playback, a

JPEG file will be paused.

• Zooming or rotating a JPEG file during folder playback may

cause an intermittent sound.

• Depending on the data size of each file, folder playback may not

function properly. (Refer to “Applicable JPEG file” on page 12.)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display

You can check the information about the current disc by pressing [DISPLAY] on the remote control.

DISPLAY

appears only in a case multi-

angle is available on the DVD.

DISPLAY

current playback status

4/12 0:03:21 - 0:02:15

11/16 0:00:00 - 0:03:30

remaining time of the current track

elapsed time of the current track

remaining time of the current

chapter

TR(Track):

DISPLAY

current track number / total tracks

elapsed time of the current

chapter

ALL:

current track number / total tracks

CH(Chapter):

current chapter number / total

chapters

4/12 0:13:45 - 0:45:40

current repeat setting, if active

DISPLAY

Track repeat

A: All Tracks repeat

B: A-B repeat

1/3 0:00:00 - 1:23:45

remaining time of the entire disc

elapsed time of the entire disc

remaining time of the current title

elapsed time of the current title

DISPLAY

TT(Title):

current title number / total titles

current HDMI status

DISPLAY

• image output / resolution of image

• sound output format

• maximum number of audio

channels

VIDEO INFO.

AUDIO INFO.

MAX CHANNEL

YCbCr/1080i

BITSTREAM

2ch

layer numbers, appears only

when playing a 2-layered disc.

L0:

L1:

Layer 0 is in playback

Layer 1 is in playback

DISPLAY

current repeat setting, appears

only when the repeat setting is

active.

C: Chapter repeat

Title repeat

B: A-B repeat

Note:

• When you are playing back a disc in program or random mode,

bit rate: the amount of audio and

video data currently being read

PROGRAM (or RANDOM) will be displayed instead of

DISPLAY

current HDMI status

• image output / resolution of image

• sound output format

DISPLAY

VIDEO INFO.

AUDIO INFO.

MAX CHANNEL

YCbCr/1080i

BITSTREAM

2ch

current playback status

• maximum number of audio

channels

TRACK 01

the name of the file currently in

play back will be displayed.

DISPLAY

TR(Track):

current track number / total tracks

1/36 0:01:15

current repeat setting, if active

Track repeat

G: Group (folder) repeat

A: Disc repeat

elapsed playing time of the

current track

DISPLAY

PROGRAM

RANDOM

(Only when you are playing back a disc in program or random

mode.)

DISPLAY

current HDMI status

• image output / resolution of image

VIDEO INFO.

AUDIO INFO.

MAX CHANNEL

YCbCr/1080i

BITSTREAM

2ch

• sound output format

• maximum number of audio

channels

DISPLAY

Note:

•

When “DUAL PLAYBACK” is “ON”, MP3 and JPEG file name will

be displayed.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Search Functions

Search function does not work during programmed or random playback.

Using Track Search

Using Time Search

Press [SEARCH MODE].

Press [SEARCH MODE] repeatedly until the time search

display appears.

MODE

/29

TOTAL 1:29:00

PLAY

Select a desired disc time by using [the Number buttons]

Select track number by using [the Number buttons] within

within 30 seconds.

30 seconds.

TOTAL 1:29:00

/29

Note:

• When there is no need to enter a number, “0” appears automatically.

For example, “0: 0_: _ _” appears in the time search display if the total

time of the title or track is less than 10 minutes.

• For the disc with less than 10 tracks, press the track number directly.

• For discs with more than 10 but less than 99 tracks, to play back

single-digit track, press [0] first, then the track number (e.g., for track

3, press [0], [3]). To play back a double-digit track, press the track

number.

• For discs with more than 100 tracks, to play back a single or a

double-digit track, press [0] first, then the track number (e.g., for

track 3, press [0], [0], [3], and for track 26, press [0], [2], [6]). To play

back a triple-digit track, press the track number.

• Press [CLEAR] to erase the incorrect input at step 2.

• For audio CD, time search is not available for programmed and random

playback.

Marker Setting

Using [SKIP H, G]

Press [SKIP H, G] during playback.

This function allows you to assign a specific point on a disc to be

called back later.

Current Track

(TR)

SKIP

To set a marker

PLAY

TR 1 TR 2 TR 3 TR 4

Press [SEARCH MODE] repeatedly until the marker

SKIP

display appears.

MODE

Note:

PLAY

• For audio CD and MP3, track search is not available for

programmed and random playback.

e.g.) DVD

Select a marker.

Using Title / Chapter Search

ENTER

Press [ENTER].

Press [SEARCH MODE] once for the chapter search.

ENTER

Press [SEARCH MODE] twice for the title search.

MODE

/12

PLAY

To return to the marker later

Press [SEARCH MODE] repeatedly until the marker

Select title/chapter number by using [the Number

display appears.

MODE

buttons] within 30 seconds.

/12

Select the marker.

ENTER

Using [SKIP H, G]

Press [SKIP H, G] during playback.

Current Chapter

(CH)

Press [ENTER] at the desired

ENTER

marker.

CH 1 CH 2 CH 3 CH 4

SKIP

PLAY

To exit the marker screen

Current Title

(TT)

Press [RETURN ].

RETURN

TT 1 TT2 TT3 TT4

SKIP

(If the disc has no chapters)

Note:

• The marker display will disappear in about 30 seconds when there is no

output.

Note:

• To clear a marker, select the marker to be cleared at step 2 in the

section “To set a marker” or “To return to the marker later” and then

press [CLEAR].

• Depending on the disc being played back, this function can

also be performed by directly entering the desired chapter

number with [the Number buttons]. Refer to the manual

accompanying the disc.

• Opening the disc tray or turning off the power will erase all markers.

• Selecting “AC” at step 2 in the section “To set a marker” or “To return to

the marker later” will also erase all markers.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat / Random / Programmed Playback

Repeat Playback

Random Playback

Repeat function is available only during playback.

This function shuffles the playing order of tracks instead of

playback in sequence.

Press [REPEAT] during playback.

Press [MODE] twice.

REPEAT

PLAY

RANDOM

CD-DA

TOTAL 0:45:55

MODE

STOP

RANDOM PROGRAM

--no indication--

e.g.) DVD

PLAY

Each time you press [REPEAT], repeat function changes as exam-

ple below.

e.g.) CD

(repeat off)

OFF

Press [PLAY B] to start random playback.

(current chapter repeat)

(current title repeat)

CHAPTER

TITLE

PLAY

(repeat off)

Note:

OFF

• To repeat the current track in the random mode, press

[REPEAT] repeatedly until “ TRACK” appears during

playback.

(current track repeat)

(entire disc repeat)

TRACK

ALL

• To repeat the entire random selections, press [REPEAT]

repeatedly until “ ALL” appears during playback.

• During random playback, you cannot go back to the previous

track.

• Random playback of MP3 or JPEG is not available while

“DUAL PLAYBACK” is “ON”.

OFF

(repeat off)

TRACK

GROUP

ALL

(current file repeat)

(current folder repeat)

(entire disc repeat)

Note:

• Repeat setting (except “ALL”) will be cleared when moving to

another title, chapter, track/file or folder.

• This function is not available with some discs or during repeat

A-B playback.

Repeat A-B Playback

Repeat function is available only during playback.

Press [A-B] at your desired starting point (A).

A-

A-B

PLAY

Press [A-B] at your desired ending point (B).

A-B

•

Point B should be in the same title or track as point A.

Note:

• To exit the sequence, press [A-B] so that “OFF” appears.

• To cancel point A, press [CLEAR] at step 1.

• This function is not available in the other repeat modes.

• The A-B repeat section can only be set within the current title

(for DVD), or current track (for audio CD).

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Note:

Programmed Playback

• Press [CLEAR] at step 2 to erase the most recently entered

track.

• To erase all programmed tracks at once, select “ALL CLEAR’’

and press [ENTER] at step 2.

You may determine the order in which tracks will play back.

• While a program is being played back, [STOP C] works as

follows;

- Press [STOP C] and [PLAY B] next, so that the

programmed playback restarts. (CD playback restarts from

the current point. MP3 or JPEG playback restarts from the

beginning of the current file.)

Press [MODE] once.

CD-DA

TOTAL 0:00:00

MODE

STOP

ENTER

- Press [STOP C] twice and [PLAY B] next, so that playback

restarts from the first track in the original order. However,

your programmed playback can be restarted when you

follow the above steps. (Your programs are still stored until

either the disc tray is open or power is turned off.)

• To repeat the current track in the program, press [REPEAT]

e.g.) CD

Using [K / L] to select desired track.

Press [ENTER].

CD-DA

TOTAL 1:03:30

3:30

5:10

10 4:20

11 3:00

12 3:20

17 4:10

22 2:50

2/3

ENTER

repeatedly until

appears during playback.

“

TRACK’’

• To repeat the entire program, press [REPEAT] repeatedly until

ALL’’ appears during playback.

• Up to 99 tracks can be programmed.

“

• If eight or more tracks were in a program, use

[SKIP H, G] to see all the tracks.

• Programmed playback of MP3 or JPEG is not available while

“DUAL PLAYBACK” is “ON“.

• While an MP3 or JPEG folder is open:

–Press [B] when you want to go to the next hierarchy.

–Press [s] when you want to go back to the previous

hierarchy (except for the top hierarchy).

Press [PLAY B] to start programmed playback.

PLAY

Special Settings

To cancel subtitle

Subtitle Language

Press [SUBTITLE] during playback.

SUBTITLE

1.ENG/6

PLAY

This unit allows you to select a subtitle language (if available)

during DVD playback.

Press [SUBTITLE] during playback.

Press [s / B] to set subtitle to “OFF”.

SUBTITLE

1.ENG/6

PLAY

OFF

ENTER

e.g.) DVD

Each time you press [SUBTITLE], subtitle language

changes as example below.

Note:

OFF

ENG

FRE

(no subtitles)

• If your language is not shown after pressing [SUBTITLE] several

times, the disc may not have that language. However, some

discs have the subtitle language setting on the disc menu.

(Operation varies depending on the discs, so refer to the manual

along with the disc.)

(English subtitles)

(French subtitles)

• When “NOT AVAILABLE” appears on the TV screen, it means no

subtitle is recorded on the scene.

• If you choose a language that has a 3-letter language code,

the code will be displayed every time you change the subtitle

language setting. If you choose any other languages, ‘---’ will be

displayed instead. Refer to page 25.

• Some discs will only allow you to change the subtitle from the

disc menu. Refer to the manual accompanying the discs for

details.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Language

Black Level Setting

Adjust the black level to make the dark areas of the TV picture

brighter.

This unit allows you to select an audio language (if multiple

languages are available) during DVD playback.

Press [AUDIO] to change audio language.

Press [MODE] during playback.

AUDIO

MODE

1.ENG Dolby D 3/2.1ch 48k/3

PLAY

Press [ENTER] to

adjust the black level.

e.g.) DVD

ENTER

OFF

Each time you press [AUDIO], the audio language changes

as example below.

ON: makes the dark areas brighter.

ENG

SPA

FRE

(English audio)

(Spanish audio)

(French audio)

OFF: shows the original picture as recorded.

RETURN

Press [RETURN

] to exit.

Stereo Sound Mode

Note:

This unit allows you to select a sound mode during CD playback.

• If your language is not shown after pressing [AUDIO] several

times, the disc may not have that language. However,

some discs allow audio language setting on the disc menu.

(Operation varies depending on the disc, so refer to the

manual along with the disc.)

Press [AUDIO] during CD playback.

STEREO

AUDIO

PLAY

• When “OFF” appears on the TV screen, it means audio

language is not available.

• Some discs will only allow you to change the audio setting

from the disc menu. Refer to the manual accompanying the

discs for details.

Each time you press [AUDIO], sound mode changes as exam-

ple below.

STEREO

L-ch

(right and left channels are active)

(left channel is active)

Camera Angles

R-ch

(right channel is active)

Some DVD may contain scenes which have been shot

simultaneously from various angles. You can change

the camera angle if

If the “ANGLE ICON” is set to “OFF” in “OTHERS”

menu, will not appear. Refer to pages 19-23.

Virtual Surround

appears on the TV screen.

You can enjoy stereophonic virtual world on your existing 2

channel stereo system.

Press [ANGLE] during playback.

Press [MODE] twice (once for CD and MP3) during

1 / 8

playback.

ANGLE

PLAY

OFF

MODE

PLAY

Each time you press [ANGLE] or [s / B], camera angle

changes.

Press [ENTER] for the desired effect.

ENTER

1: natural effect

2: emphasized effect

OFF: no effects (original sound)

RETURN

Press [RETURN

] to exit.

Note:

•For audio CD, virtual surround will not be effective if the

sound mode is set to something other than “STEREO”. Refer to

“Stereo Sound Mode”.

•For DVD, when playing back 96kHz with virtual surround

function, the sound will be down sampled to 48kHz.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Setting

QUICK Menu

You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” from “QUICK” menu quickly.

1 Press [SETUP] in the stop mode.

2 Select the desired item.

SETUP

STOP

ENTER

page 19

page 20

page 21

Step 5

QUICK SETUP

SETUP menu

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

Confirm that “QUICK” is selected.

BITSTREAM

ENTER

QUICK SETUP

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

BITSTREAM

ENTER

• Refer to the sections “PLAYER MENU”, “TV ASPECT”,

“PROGRESSIVE” or “DOLBY DIGITAL” section on pages 20-21.

CUSTOM Menu

You can change the settings of the unit.

• QUICK on pages 20-21 indicates DVD setting menus also accessible from “QUICK” menu.

1 Press [SETUP] in the stop mode.

2 Select “CUSTOM”.

3 Select the desired item.

SETUP

STOP

ENTER

SETUP menu

ENTER

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

PLAYER MENU

QUICK SETUP

ORIGINAL

OFF

ENGLISH

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

BITSTREAM

ENTER

LANGUAGE menu

DISPLAY menu

AUDIO menu

PARENTAL menu

OTHERS menu

OTHERS

DISPLAY

LANGUAGE

AUDIO

ORIGINAL

OFF

ENGLISH

TV ASPECT

STILL MODE

PROGRESSIVE

FORMAT

4:3 LETTER BOX

AUTO

OFF

RGB

NORMAL

PASSWORD

Enter current password.

ANGLE ICON

AUTO POWER OFF ON

PANEL DISPLAY

DUAL PLAYBACK

SLIDE SHOW

DRC

SUBTITLE

DISC MENU

PLAYER MENU

DOWN SAMPLING ON

DOLBY DIGITAL

HDMI AUDIO

BRIGHT

OFF

5sec

BITSTREAM

ENTER

RGB RANGE

page 19

page 20

page 21

page 22

page 23

LANGUAGE Setting

Follow steps 1 to 3 in the “CUSTOM Menu” section above.

4 Select the desired item.

5 Select the desired language.

6 To exit the menu

ENTER

SETUP

ENTER

Note:

LANGUAGE menu

AUDIO: *1 *2

AUDIO

ORIGINAL

ENGLISH

FRENCH

• Language options are not

available with some discs.

(Default: ORIGINAL)

Sets the audio

language.

LANGUAGE

• If “OTHER” is selected on “AUDIO”,

“SUBTITLE” or “DISC MENU” screen,

press 4-digit number to enter the

code for the desired language.

Refer to the “Language Code List”

on page 25.

AUDIO

ORIGINAL

OFF

ENGLISH

SUBTITLE

DISC MENU

PLAYER MENU

SUBTITLE: *1 *2

(Default: OFF)

Sets the subtitle

language.

DISC MENU: *1

(Default: ENGLISH)

Sets the language for

DVD menu.

SUBTITLE

OFF

ENGLISH

FRENCH

ENTER

• Only the languages supported by

DISC MENU

ENGLISH

FRENCH

the disc can be selected.

Note:

• In “QUICK” menu, “PLAYER

MENU”, “TV ASPECT”,

SPANISH

• “LANGUAGE” setting for “AUDIO”

and “SUBTITLE” are not available

with some discs. Then use [AUDIO]

and [SUBTITLE]. Refer to pages

17-18.

“PROGRESSIVE” or “DOLBY

DIGITAL” are available.

“QUICK “ menu consists of

the setting menu frequently

used, and they are

PLAYER MENU: ^QUICK

(Default: ENGLISH)

Sets the language for

the on-screen display.

PLAYER MENU

ENGLISH

FRANÇAIS

ESPAÑOL

accompanied with QUICK .

You can make all settings in

“CUSTOM” menu.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY Setting

You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 19.

Select the desired item.

To exit the menu

QUICK

TV ASPECT:

(Default: 4:3 LETTER BOX)

See note on the right.

SETUP

ENTER

Select the

desired

TV ASPECT

STILL MODE

PROGRESSIVE

PROGRESSIVE MODE

FORMAT

4:3 LETTERBOX

AUTO

4:3 LETTER BOX

4:3 PAN & SCAN

16:9 WIDE

Note:

setting.

OFF

AUTO 1

RGB

TV ASPECT:

DISPLAY menu

16:9 SQUEEZE

•

Select “4:3 LETTER BOX”, so

that black bars may appear

on the top and bottom of the

screen.

ENTER

RGB RANGE

NORMAL

ENTER

DISPLAY

•

Select “4:3 PAN & SCAN” for a

full height picture with both

sides adjusted.

TV ASPECT

4:3 LETTER BOX

STILL MODE

PROGRESSIVE

AUTO

OFF

STILL MODE: (Default: AUTO)

See note on the right.

STILL MODE

PROGRESSIVE MODE AUTO1

ENTER

FORMAT

RGB

Select the

desired

Select “16:9 WIDE” if a

ENTER

RGB RANGE

NORMAL

wide-screen TV is connected to

this unit.

TV ASPECT

STILL MODE

PROGRESSIVE

PROGRESSIVE MODE

FORMAT

4:3 LETTERBOX

AUTO

FIELD

FRAME

setting.

OFF

AUTO 1

RGB

Select “16:9 SQUEEZE” when

the TV screen is too large

horizontally at “16:9 WIDE”

setting and when it is possible

to adjust the screen size using

the TV’s controls.

ENTER

RGB RANGE

NORMAL

ENTER

STILL MODE:

PROGRESSIVE MODE: (Default: AUTO1)

See note on the right.

•

Select “AUTO” usually.

• If you select “AUTO”, it

automatically selects the best

resolution setting (“FRAME”

or “FIELD”) based on the data

characteristics of the pictures.

(default)

Select the

ENTER

PROGRESSIVE MODE

desired

setting.

TV ASPECT

STILL MODE

PROGRESSIVE

PROGRESSIVE MODE

FORMAT

4:3 LETTERBOX

AUTO

AUTO1

AUTO2

VIDEO

OFF

AUTO 1

RGB

ENTER

• If you select “FIELD”, the

picture in the still mode will be

stabilized.

RGB RANGE

NORMAL

ENTER

•

If you select “FRAME”, the

picture in the still mode will be

highly defined.

FORMAT: (Default: RGB)

See note on the right.

•

An individual picture on TV

screen is called a “frame”,

which consists of two separate

images called as “field”.

Some pictures may be blurred

at the “AUTO” setting in the

still mode due to their data

characteristics.

4:3 LETTERBOX

AUTO

OFF

AUTO1

YCbCr

TV ASPECT

STILL MODE

PROGRESSIVE

PROGRESSIVE MODE

FORMAT

4:3 LETTERBOX

AUTO

OFF

AUTO 1

RGB

•

NORMAL

RGB RANGE

NORMAL

ENTER

PROGRESSIVE MODE:

•

You can select a mode below

for the progressive scan

output.

RGB RANGE: (Default: NORMAL)

See note on the right.

AUTO1: mode suitable for

images on the film

material.

4:3 LETTERBOX

AUTO

OFF

AUTO1

RGB

TV ASPECT

STILL MODE

PROGRESSIVE

PROGRESSIVE MODE

FORMAT

4:3 LETTERBOX

AUTO

AUTO2: mode for images on

the material of 30-

frame film.

OFF

AUTO 1

RGB

ENHANCED

RGB RANGE

NORMAL

VIDEO: mode for video

material.

ENTER

FORMAT:

•

Select an HDMI output mode

between “YCbCr” and “RGB”.

When the connected device

is not compatible with YCbCr,

HDMI signal is output as RGB

regardless of the setting.

•

QUICK

If “PROGRESSIVE” is “ON”,

this message appears:

PROGRESSIVE:

(Default: OFF)

See note on the right.

•

This setting is effective only

when you use the HDMI

Select “YES”.

Before proceeding…

1. Make sure your TV has progressive scan.

2. Connect with component video cable

R^cG^oBⁿⁿR^ecA^tiN^onG^.E:

4:3 LETTERBOX

AUTO

TV ASPECT

STILL MODE

4:3 LETTERBOX

AUTO

SETUP

NOTE: If there is no picture or picture is

distorted after selecting “YES”,

ENTER

wait about 15 seconds for auto recovery.

AUTO 1

RGB

PROGRESSIVE OFF

•

Select a HDMI picture mode

between “NORMAL” and

“ENHANCED”.

Activate Progressive?

YES

PROGRESSIVE MODE

FORMAT

AUTO 1

RGB

SELECT:

SET:ENTER

NORMAL

RGB RANGE

NORMAL

ENTER

Select “ENHANCED” if the

black- white contrast is not

clear.

If there is no picture or you

do not press any buttons

for 15 seconds, Progressive

Scan will switch to“OFF”.

This setting is effective only for

HDMI RGB output.

PROGRESSIVE:

ENTER

Select “YES”.

6 To complete the

•

You can set “PROGRESSIVE”

to “OFF” either in “DISPLAY”

menu or by pressing and

holding [PLAY B] on the front

of the unit for more than 5

seconds.

PROGRESSIVE setting

Confirm again to use progressive scan.

If Picture is good, Select “YES”.

ENTER

YES

SET:ENTER

SELECT:

•

When “PROGRESSIVE” is “ON”,

video signals from VIDEO OUT

and S-VIDEO OUT jacks will be

distorted or not be output at

all.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

AUDIO Setting

Choose the appropriate audio setting for your device. It only affects during the playback of DVD. Follow steps 1 to 3 in the “CUSTOM

Menu” section on page 19.

4 Select the desired item.

6 To exit the menu

DRC (Dynamic Range Control): (Default: ON)

Set to “ON” to compress the range between soft and loud

sounds.

SETUP

ENTER

DRC

OFF

DOWN SAMPLING ON

DOLBY DIGITAL

HDMI AUDIO

BITSTREAM

Note:

ENTER

DRC:

AUDIO menu

• This function is available

only on the discs which

are recorded in the Dolby

Digital format.

DOWN SAMPLING:

• When playing back a

96kHz disc with the

DOWN SAMPLING: (Default: ON)

Set to “ON” when outputting in 48kHz.

Set to “OFF” when outputting the original sound.

AUDIO

DRC

DOWN SAMPLING ON

DOLBY DIGITAL

HDMI AUDIO

BITSTREAM

DRC

DOWN SAMPLING ON

OFF

ENTER

DOLBY DIGITAL

HDMI AUDIO

BITSTREAM

when virtual surround is

set to “1” or “2”, the sound

will be down sampled at

48kHz even if the “DOWN

SAMPLING” is set to “OFF”.

• When the HDMI sound

can be output, the setting

change cannot be done.

• This function is available

only on digital output-

ting of a disc recorded in

96kHz.

ENTER

Note:

DOLBY DIGITAL: ^QUICK

(Default: BITSTREAM)

• In “QUICK” menu, “PLAYER

MENU”, “TV ASPECT”,

Set to “BITSTREAM” when the unit is connected to a Dolby Digital

decoder.

“PROGRESSIVE” or “DOLBY

DIGITAL” are available.

“QUICK” menu consists

of the setting menu

frequently used, and they

are accompanied with QUICK

. You can make all settings in

“CUSTOM” menu.

•

BITSTREAM: outputs Dolby Digital signals.

PCM: converts the Dolby Digital into PCM (2 channel).

DRC

PCM

DOWN SAMPLING ON

DOLBY DIGITAL

HDMI AUDIO

BITSTREAM

ENTER

HDMI AUDIO:

• When the HDMI sound

cannot be output, the

setting change cannot be

done.

HDMI AUDIO: (Default: ON)

This function is only available when you use an HDMI

connection.

•

ON: to output the HDMI sound.

OFF: not to output the HDMI sound.

DRC

DOWN SAMPLING ON

DOLBY DIGITAL

HDMI AUDIO

BITSTREAM

OFF

ENTER

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PARENTAL Setting

This function prevents unit from playing material inappropriate for children.

Parental Levels

Parental level allows you to set the rating levels of your DVD software. Playback will stop if the ratings exceed the levels you set. Follow

steps 1 to 3 in the “CUSTOM Menu” section on page 19.

4 Enter your desired 4-digit

5 Select “PARENTAL

6 Select the desired

7 To exit the menu

password (expect for 4737).

LEVEL”.

level.

SETUP

ENTER

PARENTAL LEVEL

ALL

PARENTAL LEVEL

PASSWORD CHANGE

ALL

8 [ADULT]

7 [NC-17]

6 [R]

PARENTAL menu

CONTROL LEVELS

PASSWORD

• ALL:

all parental locks are canceled.

• Level 8:

DVD software of any grades (adult/general/children) can be played

back.

ENTER

• Levels 7 to 2: only DVD software intended for general use and children can be played

back.

• Level 1:

only DVD software intended for children can be played back, with

If you have set a password

already, enter the current

4-digit password.

those intended for adult and general use prohibited.

TIPS FOR LEVELS

• 8 [ADULT]:

• 7 [NC-17]:

DVD software of any grades (adult/general/children) can be played

back.

no one under 17 admitted

• 6 [R]: restricted; under 17 requires accompanying parent or adult guardian

• 5 [PGR]:

• 4 [PG13]:

• 3 [PG]:

• 2 [G]:

parental guidance recommended

unsuitable for children under 13

parental guidance suggested

general audience

ENTER

• 1 [KID SAFE]: suitable for children

Note:

• Some DVD-video may not respond to “PARENTAL“ setting. Make sure this function

works with your DVD-video.

• The resume information will be cleared if you change the parental level when the

resume information is on.

To Change the Password for Parental Controls

You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 19.

4 Enter current 4-digit

5 Select “PASSWORD

6 Enter your new

4-digit password

(except for 4737).

7 To exit the menu

password.

CHANGE”.

SETUP

ENTER

Note:

PARENTAL LEVEL

PASSWORD CHANGE

ALL

• Record the password

in case you forget it.

• If you forget the

PARENTAL menu

password, press [4],

[7], [3], [7] at step 4,

then enter your new

password. Password

will be cleared and

parental levels will be

set to “ALL”.

PASSWORD

ENTER

–

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHERS Setting

You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 19.

4 Select the desired item.

6 To exit the menu

ANGLE ICON: (Default: ON)

SETUP

Set to “ON” to display

when multiple camera

ENTER

angles are available during DVD playback.

OFF

ANGLE ICON

AUTO POWER OFF ON

OTHERS menu

ENTER

OTHERS

AUTO POWER OFF: (Default: ON)

Set to “ON” to turn this unit off automatically after 30

minutes of no use.

ANGLE ICON

AUTO POWER OFF ON

PANEL DISPLAY

DUAL PLAYBACK

SLIDE SHOW

BRIGHT

OFF

5sec

ENTER

ANGLE ICON

AUTO POWER OFF ON

OFF

ENTER

PANEL DISPLAY: (Default: BRIGHT)

Set the front panel display brightness.

ANGLE ICON

PANEL DISPLAY

ENTER

AUTO POWER OFF ON

PANEL DISPLAY BRIGHT

DUAL PLAYBACK OFF

ENTER

BRIGHT

DIMMER

AUTO

SLIDE SHOW

5sec

ENTER

DUAL PLAYBACK: (Default: OFF)

Set to “ON” to play back MP3 files and JPEG files simultaneously.

BRIGHT

5sec

ANGLE ICON

AUTO POWER OFF

PANEL DISPLAY

DUAL PLAYBACK

SLIDE SHOW

BRIGHT

OFF

5sec

ENTER

SLIDE SHOW: (Default: 5sec)

Set the display time or set to display an image for

each MP3 sound file playback.

ANGLE ICON

SLIDE SHOW

AUTO POWER OFF ON

PANEL DISPLAY BRIGHT

DUAL PLAYBACK OFF

5sec

10sec

MUSIC

ENTER

SLIDE SHOW

5sec

ENTER

Reset to the Default Setting (Except for PARENTAL Setting)

1 Press [SETUP] in the

2 Select “INITIALIZE”.

3 Select “YES”.

4 To exit the menu

stop mode.

SETUP

STOP

SETUP

ENTER

SETUP menu

Press

Note:

twice.

INITIALIZE

Initialize?

•

When you do not wish

to initialize, select

“NO” at step 3.

QUICK SETUP

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

YES

ENTER

BITSTREAM

–

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this manual. Refer to the following:

Problem Corrective action

No power.

• Make sure the power plug is connected to an AC outlet.

• Make sure the power is turned on.

This unit does not

respond to the remote

control.

• Check if the power plug is connected to an AC outlet.

• Check the batteries in the remote control.

•

Aim the remote control directly at the infrared sensor window. If necessary, remove all the obstacles between the

sensor and the remote control.

• You have to be within 23 feet (7m) of this unit.

• Tune your radio to an empty AM station so that you hear a lot of static. Turn up the volume, then if you

hear some signal sound from the radio in response to your pressing buttons on the remote control, the

remote control is working.

• Press and hold any button on remote control toward a digital camera. The remote control is working if

you confirm infrared light through the digital camera.

Poor picture or noise.

No picture.

• Interference signal may be received. Change the position and direction of the unit.

• Connect the video cable firmly.

• Insert a correct video disc that can be played back on this unit.

• Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive scan and you

are using the component video connections between the unit and the TV. Disable progressive scan for all

other connections. Refer to page 6.

No sound/image from

HDMI connection.

• Check the HDMI connection. (Check the status of the HDMI related indications.)

• Check whether the connected monitor device or other device supports HDCP. (This unit will not output a

video signal unless the other device supports HDCP.)

• Check the setting of HDMI.

• Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of

other connected device.

• If the unit is connected to the unauthorized display device with an HDMI cable, the audio/video signal

may not be output when playing back a commercial DVD-video.

Distorted picture.

• Connect this unit directly to the TV.

• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.

• Although pictures may stop for a moment, this is not a malfunction. Refer to page 11.

• Check if “PROGRESSIVE” mode is set correctly according to your TV. Refer to pages 19-20.

Disc cannot be played

back.

• Insert the disc.

• Clean the disc.

• Place the disc correctly with the label side up.

• Cancel the parental lock or change the control levels.

• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.

No sound.

• Connect the audio cables firmly.

• Turn on the power of the audio component.

• Correct the audio output settings.

• Correct the input settings on the audio component.

No DTS audio is output.

Audio or subtitle

• This unit does not support DTS audio.

-This is not a malfunction.

• The selected language is not available for audio or subtitles on the DVD.

language does not match -This is not a malfunction.

the setting.

The camera angle cannot • The DVD does not contain sequences recorded from different camera angles.

be changed.

-This is not a malfunction.

Audio or subtitle

language

cannot be changed.

• The DVD does not contain audio source or subtitles in the selected language.

-This is not a malfunction.

“

” appears on the TV

• That operation is prohibited by this unit or the disc.

-This is not a malfunction.

screen, prohibiting an

operation.

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on correct operations.

• Playback from a desired track and random playback are not available during programmed playback.

• Some functions are prohibited on some discs.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Output signal format :

NTSC color

• Designs and specifications are subject to

change without notice.

• If there is a discrepancy between

languages, the default language will be

English.

Operating temperature :

41°F (5°C) to 104°F (40°C)

Dimensions :

Power source :

120 V AC +/- 10%, 60 Hz +/- 0.5%

Power consumption :

10W (standby : 0.8W)

W : 17.2”

(435mm)

(51mm)

: 2.1”

: 8.4”

(211mm)

Weight :

Approx 4.0lbs (1.8kg)

Language Code List

Language

Code

Language

Code

Language

Code

Language

Code

A-B

French [FRE]

Frisian

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

Macedonian

Malagasy

Malay

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

Siswat

6565

6557

6558

6561

5165

6567

6569

6568

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali;Bangla

Bhutani

Bihari

Bislama

Breton

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Slovak [SLO]

Slovenian

Somali

Galician

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Malayalam

Maltese

Maori

Spanish [SPA]

Sundanese

Swahili

Marathi

Moldavian

Mongolian

Nauru

Swedish [SWE]

Gujarati

Hausa

Hebrew

Hindi

Hungarian [HUN]

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Nepali

Norwegian [NOR]

O-R

I-K

Occitan

Oriya

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Oromo(Afan)

Panjabi

Pashto;Pushto

Persian

Bulgarian [BUL]

Burmese

Byelorussian

Irish [IRI]

Polish [POL]

Portuguese [POR]

Quechua

Italian [ITA]

Japanese [JPN]

Javanese

C-E

Cambodian

Catalan

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

U-Z

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Korean [KOR]

Kurdish

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Chinese [CHI]

Corsican

Croatian

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

Czech [CZE]

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

L-N

Yiddish

Yoruba

Zulu

Laothian

Latin

Latvian;Lettish

Lingala

Lithuanian

5861

5847

5868

5860

5866

F-H

Setswana

Shona

Sindhi

Faroese

Fiji

Finnish [FIN]

5261

5256

5255

Singhalese

If you choose a language that has a 3-letter language code, the code will be displayed every time you change the audio or subtitle language setting on pages 17-18. If you choose

any other languages, ‘---’ will be displayed instead. (3-letter language code is written in bracket.)

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect

in materials or workmanship as follows:

ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY,

AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI

AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS

AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS

WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE

CENTER.

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without

charge for one (1) year from the date of original retail purchase. Certain

parts are excluded from this warranty.

IMPORTANT:

LABOR:

FUNAI CORP. will provide the labor without charge for a period of

ninety (90) days from the date of original retail purchase.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE

OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING

THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE

REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt

or other proof of original retail purchase will be required together with the product

to obtain service under this warranty.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are

altered, replaced, defaced, missing or if service was attempted by an unauthorized

service center. This limited warranty does not apply to any product not purchased

and used in the United States.

This product is produced for home use and this warranty only covers failures due

to defects in material or workmanship which occurs during normal use. It does not

cover damage which occurs in shipment, or failures which are caused by repairs,

alterations or product not supplied by FUNAI CORP., or damage which results from

accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation,

improper maintenance, commercial use such as hotel, rental or office use of this

product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES

(EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS,

DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE

LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING

OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS

PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI,

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product

freight prepaid, in either its original packaging or packaging affording an equal

degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not

reimburse you for any service done by unauthorized service providers without

prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service

inquiries, please contact us at:

FUNAI CORPORATION

Customer Service

Tel :1-800-968-3429

http://www.sylvania-ce.com

19900 Van Ness Avenue, Torrance, CA 90501

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Memo

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Español

Conexiones

Reproducción

Si su televisor tiene entradas

de audio/video vea la sección

“Connection to a TV” en la página

6 en el manual de manejo. En

caso contrario, vea la sección

“Connecting to RF Modulator (Not

Supplied)” en la página del frente en

el manual de manejo.

Antes.

Para abrir la bandeja

del disco

Ponga un disco con la etiqueta

hacia arriba.

POWER

OPEN/CLOSE

MODE

DISPLAY

Encienda el televisor,

POWER

OPEN/CLOSE

AUDIO

SUBTITLE

ANGLE

REPEAT

A-B

amplificador y otros

equipos conectados a

esta unidad. Asegúrese

que el televisor y el sin-

tonizador de audio están

en el canal correcto.

CLEAR

HDMI

Para empezar la

reproduccción.

Para parar la reproducción.

PAUSE

SLOW

SKIP

PLAY

STOP

REV

FWD

PLAY

STOP

Disco

(Orden alfabético)

Botón

Instalación de las

pilas en el control

remoto

• Para seleccionar directamente el capítulo o título. • Para seleccionar directamente la canción.

• Para buscar en avance/retroceso por un disco.

REV

FWD

•

Para empezar la reproducción en avance lento/retro-

ceso durante el modo de pausa.

(CD/MP3)

ENTER

A-B

• Para mover el cursor y determinar la posición.

Para cambiar el

idioma en la pantalla

• Para repetir entre su punto A y B seleccionado.

(CD)

• Para repetir entre su punto A y B seleccionado.

ANGLE

AUDIO

•

Para seleccionar los ángulos de la cámara en un

disco.

• Para girar la imagen. (JPEG).

POWER

Confirme que ha

seleccionado “QUICK”.

• Para seleccionar idiomas de audio en un disco.

• Para seleccionar “ESTÉREO”, “L-ch” o “R-ch”. (CD)

• Para borrar los marcadores. (CD)

• Para borrar los marcadores.

• Para borrar los números mal entrados.

• Para borrar el punto para la repetición A-B.

CLEAR

• Para eliminar el Nº de estado en la entrada de programa.

• Para borrar los números mal entrados.

QUICK SETUP

• Para borrar el punto para la repetición A-B. (CD)

STOP

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

DISPLAY

HDMI

BITSTREAM

• Para mostrar el modo de disco actual.

• Para ponerle el rendimieto señalado al HDMI.

• Para llamar el menú en un disco.

• Para mostrar el modo de disco actual.

• Para ponerle el rendimieto señalado al HDMI.

• Para abrir la lista de archivos.

SETUP

ENTER

• Para disponer el orden de reproducción o la

reproducción aleatoria. (CD)

• Para activar/desactivar el ambiental virtual. (CD/MP3)

• Para activar el modo carrusel de diapositivas. (JPEG)

MODE

• Para activar/desactivar el nivel del negro.

• Para activar/desactivar el ambiental virtual.

2 Confirme que ha seleccionado

“PLAYER MENU”.

OPEN/CLOSE

PAUSE

• Para abrir o cerrar la bandeja del disco.

• Para encender la unidad.

• Para abrir o cerrar la bandeja del disco.

• Para encender la unidad.

QUICK SETUP

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

• Para hacer una pausa en la reproducción.

BITSTREAM

• Para hacer una pausa en la reproducción del disco.

•

Para avanzar la reproducción un cuadro cada vez.

• Para empezar la reproducción del disco.

• Para encender la unidad.

• Para empezar la reproducción del disco.

• Para encender la unidad.

PLAY

ENTER

POWER

• Para encender o apagar la unidad.

3 Seleccione el idioma deseado

para las indicaciones en la

pantalla.

•

Para reproducir repetidamente una canción o disco. (CD)

Para reproducir repetidamente una canción, grupo o

disco. (MP3/JPEG)

REPEAT

RETURN

•

Para reproducir repetidamente un capítulo o título.

PLAYER MENU

• Para volver a la operación anterior en el menú.

ENTER

ENGLISH

FRANÇAIS

ESPAÑOL

MODE

• Para buscar una canción.

• Para buscar un capítulo, título o tiempo.

• Para colocar o buscar los marcadores.

• Para buscar el tiempo. (CD)

• Para colocar o buscar los marcadores. (CD)

SETUP

SKIP

• Para llamar el menú de ajustes de DVD.

• Para saltar capítulos o titulo.

• Para llamar el menú de ajustes de DVD.

• Para saltar canciones.

• Para parar la reproducción.

------

ENTER

SETUP

STOP

4 Para salir del menú.

• Para parar la reproducción.

SUBTITLE

• Para seleccionar subtítulos en un disco.

• Para volver al archivo superior de la jerarquía

más alta en el programa y en la lista de archivo.

(MP3/JPEG)

TOP MENU

ZOOM

• Para llamar el menú inicial en un disco.

• Para ampliar la imagen de vídeo en DVD. (2x / 4x) • Para ampliar parte de la imagen (x2). (JPEG)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Use Guide

Connections

Playback

If your TV has audio/video input

jacks, see the section “Connection

to a TV” on page 6 of the owner’s

manual. If not, see the section

“Connecting to RF Modulator (Not

Supplied)” on the front page of the

owner’s manual.

Before:

Turn on the TV,

To open the disc

tray

Insert a disc with label

facing up.

POWER

OPEN/CLOSE

MODE

DISPLAY

POWER

AUDIO

SUBTITLE

ANGLE

REPEAT

OPEN/CLOSE

amplifier and any other

equipment which are

connected to this unit.

Make sure the TV and

audio receiver are set

to the correct channel.

CLEAR

HDMI

To start playback

To stop playback

PAUSE

SLOW

SKIP

STOP

PLAY

REV

FWD

STOP

Installing the

Batteries for the

Remote Control

Disc

(Alphabetical order)

Button

• To select chapter or title directly.

• To select track or file directly.

• To search forward/backward through a disc.

• To begin slow forward/reverse playback in the

pause mode.

•

To search forward/backward through a disc.

(CD/MP3)

REV

FWD

ENTER

A-B

To Change the

On-Screen Language

• To move the cursor and determine its position.

•

To repeat between your chosen point of A and B.

•

To repeat between your chosen point A and B. (CD)

POWER

Confirm that “QUICK” is

selected.

ANGLE

AUDIO

• To select camera angles on a disc.

• To select audio language on a disc.

• To rotate a picture. (JPEG)

• To select “STEREO”, “L-ch” or “R-ch”. (CD)

QUICK SETUP

STOP

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

• To clear the markers. (CD)

BITSTREAM

CLEAR

• To clear the markers.

• To remove status number in program input.

• To clear the numbers entered incorrectly.

• To cancel the point for A-B repeat. (CD)

• To clear the numbers.

• To cancel the point for A-B repeat.

SETUP

DISPLAY

HDMI

• To display the current disc mode.

• To set the HDMI signal output.

• To call up the menu on a disc.

• To display the current disc mode.

• To set the HDMI signal output.

• To call up the file list. (MP3/JPEG)

ENTER

2 Confirm that “PLAYER MENU” is

selected.

• To arrange the playing order or play randomly. (CD)

• To set virtual surround on/off. (CD/MP3)

• To activate the slide show mode. (JPEG)

MODE

• To set black level on/off.

• To set virtual surround on/off.

QUICK SETUP

OPEN/CLOSE

PAUSE

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

• To open or close the disc tray.

• To turn on the unit.

• To open or close the disc tray.

• To turn on the unit.

BITSTREAM

• To pause disc playback.

• To advance playback one frame at a time.

• To pause disc playback.

ENTER

• To begin disc playback.

• To turn on the unit.

• To begin disc playback.

• To turn on the unit.

PLAY

3 Select the desired language for

POWER

the on-screen display.

• To turn the unit on/off.

• To play back a track or disc repeatedly. (CD)

• To play back a file, folder or disc repeatedly.

(MP3/JPEG)

REPEAT

RETURN

PLAYER MENU

ENGLISH

FRANÇAIS

ESPAÑOL

ENTER

• To play back a chapter or title repeatedly.

• To return to the previous operation in menu.

MODE

• To search tracks.

• To search chapter, title or time.

• To set or search the markers.

ENTER

• To search time. (CD)

• To set or search the markers. (CD)

SETUP

SKIP

• To call up the setup menu.

• To skip chapters or titles.

• To call up the setup menu.

• To skip tracks.

• To stop playback.

------

SETUP

4 To exit the menu.

STOP

• To stop playback.

SUBTITLE

• To select subtitles on a disc.

• To call up the top menu on a disc.

• To magnify part of a picture. (2x/4x)

TOP MENU

ZOOM

• To return to the top file in the highest hierarchy of

the program and the file list. (MP3/JPEG)

• To magnify part of a picture. (x2) (JPEG)

Printed in China

E6E23UD

1VMN25273 ★★★★★

Download from Www.Somanuals.com. All Manuals Search And Download.

Shark Vacuum Cleaner EP602RF User Manual
Sharp Projector XG F210X User Manual
Shop Vac Vacuum Cleaner 87M300 User Manual
Sony CD Player CDP D11 User Manual
Sony Flat Panel Television 4 256 733 F21 User Manual
Sony Headphones MDR DS3000 User Manual
Sony Printer SVM 30MS User Manual
Southbend Oven TG60PC User Manual
Sunrise Medical Mobility Aid ST DT User Manual
Sylvania CRT Television SST4131 SST4191 User Manual