Sony Flat Panel Television 4 256 733 F21 User Manual

4-256-733-F2(1)  
Operating Instructions  
GB  
LCD  
Digital Colour TV  
KDL-22PX300  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
GB  
GB  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start-up Guide  
Before Use  
1: Connecting an antenna  
(aerial)/Set Top Box/  
recorder (e.g. DVD recorder)  
To check the accessories  
Remote (1)  
Connecting a Set Top Box/recorder (e.g.  
DVD recorder) with SCART  
Size AAA batteries (R3 type) (2)  
Analog controller (DUALSHOCK®2) (1)  
To insert batteries into the remote  
Push and lift the  
cover to open.  
Set Top Box/recorder (e.g. DVD recorder)  
Connecting a Set Top Box/recorder (e.g.  
DVD recorder) with HDMI  
Set Top Box/recorder (e.g. DVD recorder)  
GB  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2: Preventing the TV from  
toppling over  
3: Organising the AC power  
cord (mains lead)  
4: Performing the initial set-  
up  
1
2
3
Install a wood screw (4 mm in diameter,  
not supplied) in the TV stand.  
Install a machine screw (M4 × 16, not  
supplied) into the screw hole of the TV.  
1 Connect the TV to your AC power outlet  
Tie the wood screw and the machine  
screw with a strong cord (not supplied).  
(mains socket).  
2 Press 1 on the TV.  
When you switch on the TV for the first  
time, the Language menu appears on the  
screen.  
3
Follow the instructions on the screen.  
GB  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Digital Auto Tuning: When you select  
“Cable”, we recommend that you select  
“Quick Scan” for quick tuning. Set  
“Frequency” and “Network ID” according  
to the information supplied from your  
cable provider. If no channel is found  
using “Quick Scan”, try “Full Scan”  
(though it may take some time).  
~
• “Full Scan” may not be available depending  
on your region/country.  
For a list of compatible cable providers,  
refer to the support web site:  
DVBC/  
Programme Sorting: If you want to  
change the order of analogue channels,  
follow the steps in “Programme Sorting”  
~
You can also tune channels manually (page 54).  
• “Language”, “Time Zone” and “Daylight Savings  
Time (Summer Time)” of the PlayStation 2  
setting menu cannot be set in the initial set-up.  
They can be set in the main menu for PlayStation  
settings (page 43).  
GB  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not install the TV set as shown  
below.  
liquids, such as vases, shall be placed on  
the TV.  
Safety  
Air circulation is blocked.  
Situation:  
Information  
Do not use when your hands are wet, with  
the cabinet removed, or with attachments  
not recommended by the manufacturer.  
Disconnect the TV set from mains socket  
and aerial during lightning storms.  
Installation/Set-up  
Install and use the TV set in accordance  
with the instructions below in order to  
avoid any risk of fire, electrical shock or  
damage and/or injuries.  
Wall  
Broken pieces:  
• Do not throw anything at the TV set. The  
screen glass may break by the impact and  
cause serious injury.  
• If the surface of the TV set cracks, do not  
touch it until you have unplugged the  
mains lead. Otherwise electric shock  
may result.  
Installation  
• The TV set should be installed near an  
easily accessible mains socket.  
• Place the TV set on a stable, level  
surface.  
Mains lead  
Handle the mains lead and socket as  
follows in order to avoid any risk of fire,  
electrical shock or damage and/or injuries:  
• Only qualified service personnel should  
carry out wall installations.  
When not in use  
• If you will not be using the TV set for  
several days, the TV set should be  
disconnected from the mains for  
environmental and safety reasons.  
• As the TV set is not disconnected from  
the mains when the TV set is just turned  
off, pull the plug from the mains to  
disconnect the TV set completely.  
• However, some TV sets may have  
features that require the TV set to be left  
in standby to work correctly.  
Transporting  
• Before  
transporting the  
TV set, disconnect  
all cables.  
• When transporting  
the TV set by  
hand, hold it as  
shown on the  
right. Do not put  
stress on the LCD  
panel and the  
frame around the  
screen.  
• When lifting or  
moving the TV  
set, hold it firmly  
from the bottom.  
• When transporting the TV set, do not  
subject it to jolts or excessive vibration.  
• When transporting the TV set for repairs  
or when moving, pack it using the  
original carton and packing material.  
Use only mains leads supplied by  
Sony, not other suppliers.  
Insert the plug fully into the mains  
socket.  
Operate the TV set on a 220-240 V AC  
supply only.  
When wiring cables, be sure to unplug  
the mains lead for your safety and take  
care not to catch your feet on the  
cables.  
Disconnect the mains lead from the  
mains socket before working on or  
moving the TV set.  
For children  
• Do not allow children to climb on the TV  
set.  
• Keep small accessories out of the reach  
of children, so that they are not  
mistakenly swallowed.  
Keep the mains lead away from heat  
sources.  
Unplug the mains plug and clean it  
regularly. If the plug is covered with  
dust and it picks up moisture, its  
insulation may deteriorate, which  
could result in a fire.  
If the following problems  
occur...  
Turn off the TV set and unplug the mains  
lead immediately if any of the following  
problems occur.  
Notes  
Ventilation  
• Never cover the ventilation holes or  
insert anything in the cabinet.  
• Leave space around the TV set as shown  
below.  
• Do not use the supplied mains lead on  
any other equipment.  
• Do not pinch, bend, or twist the mains  
lead excessively. The core conductors  
may be exposed or broken.  
• Do not modify the mains lead.  
• Do not put anything heavy on the mains  
lead.  
• Do not pull on the mains lead itself when  
disconnecting the mains lead.  
• Do not connect too many appliances to  
the same mains socket.  
Ask your dealer or Sony service centre to  
have it checked by qualified service  
personnel.  
Installed with stand  
30 cm  
When:  
10 cm  
10 cm  
6 cm  
Mains lead is damaged.  
Poor fitting of mains socket.  
TV set is damaged by being dropped,  
hit or having something thrown at it.  
Any liquid or solid object falls through  
openings in the cabinet.  
• Do not use a poor fitting mains socket.  
Leave at least this space around  
the set.  
Prohibited Usage  
Do not install/use the TV set in locations,  
environments or situations such as those  
listed below, or the TV set may  
malfunction and cause a fire, electrical  
shock, damage and/or injuries.  
• To ensure proper ventilation and prevent  
the collection of dirt or dust:  
Warning  
To prevent the spread of fire, keep candles  
or other open flames away from this  
product at all time.  
Do not lay the TV set flat, install  
upside down, backwards, or  
sideways.  
Do not place the TV set on a shelf,  
rug, bed or in a closet.  
Do not cover the TV set with a cloth,  
such as curtains, or items such as  
newspapers, etc.  
Location:  
Outdoors (in direct sunlight), at the  
seashore, on a ship or other vessel, inside a  
vehicle, in medical institutions, unstable  
locations, near water, rain, moisture or  
smoke.  
Environment:  
Places that are hot, humid, or excessively  
dusty; where insects may enter; where it  
might be exposed to mechanical vibration,  
near flammable objects (candles, etc). The  
TV set shall not be exposed to dripping or  
splashing and no objects filled with  
GB  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
• This equipment has been tested and  
found to comply with the limits set out in  
the EMC Directive using a connection  
signal cable shorter than 3 meters.  
ensuring these batteries are disposed of  
correctly, you will help prevent potentially  
negative consequences for the  
environment and human health which  
could otherwise be caused by  
Precautions  
Viewing the TV  
• View the TV in moderate light, as  
viewing the TV in poor light or during  
long period of time, strains your eyes.  
• When using headphones, adjust the  
volume so as to avoid excessive levels,  
as hearing damage may result.  
Batteries  
• Observe the correct polarity when  
inserting batteries.  
• Do not use different types of batteries  
together or mix old and new batteries.  
• Dispose of batteries in an  
environmentally friendly way. Certain  
regions may regulate the disposal of  
batteries. Please consult your local  
authority.  
• Handle the remote with care. Do not  
drop or step on it, or spill liquid of any  
kind onto it.  
• Do not place the remote in a location  
near a heat source, a place subject to  
direct sunlight, or a damp room.  
inappropriate waste handling of the  
battery. The recycling of the materials will  
help to conserve natural resources. In case  
of products that for safety, performance or  
data integrity reasons require a permanent  
connection with an incorporated battery,  
this battery should be replaced by qualified  
service staff only. To ensure that the  
battery will be treated properly, hand over  
the product at end-of-life to the applicable  
collection point for the recycling of  
electrical and electronic equipment. For all  
other batteries, please view the section on  
how to remove the battery from the product  
safely. Hand the battery over to the  
applicable collection point for the  
LCD Screen  
• Although the LCD screen is made with  
high-precision technology and 99.99%  
or more of the pixels are effective, black  
dots may appear or bright points of light  
(red, blue, or green) may appear  
constantly on the LCD screen. This is a  
structural property of the LCD screen  
and is not a malfunction.  
• Do not push or scratch the front filter, or  
place objects on top of this TV set. The  
image may be uneven or the LCD screen  
may be damaged.  
• If this TV set is used in a cold place, a  
smear may occur in the picture or the  
picture may become dark. This does not  
indicate a failure. These phenomena  
disappear as the temperature rises.  
• Ghosting may occur when still pictures  
are displayed continuously. It may  
disappear after a few moments.  
recycling of waste batteries. For more  
detailed information about recycling of  
this product or battery, please contact your  
local Civic Office, your household waste  
disposal service or the shop where you  
purchased the product.  
Disposal of the TV set  
Disposal of Old  
Electrical &  
Electronic  
Equipment  
(Applicable in  
the European  
• The screen and cabinet get warm when  
this TV set is in use. This is not a  
malfunction.  
• The LCD screen contains a small amount  
of liquid crystal. Some fluorescent tubes  
used in this TV set also contain mercury.  
Follow your local ordinances and  
regulations for disposal.  
Union and other European  
countries with separate  
collection systems)  
This symbol on the product or on its  
packaging indicates that this product shall  
not be treated as household waste. Instead  
it shall be handed over to the applicable  
collection point for the recycling of  
electrical and electronic equipment. By  
ensuring this product is disposed of  
correctly, you will help prevent potential  
negative consequences for the  
Handling and cleaning the  
screen surface/cabinet of  
the TV set  
Be sure to unplug the mains lead connected  
to the TV set from mains socket before  
cleaning.  
environment and human health, which  
could otherwise be caused by  
inappropriate waste handling of this  
product. The recycling of materials will  
help to conserve natural resources. For  
more detailed information about recycling  
of this product, please contact your local  
Civic Office, your household waste  
disposal service or the shop where you  
purchased the product.  
To avoid material degradation or screen  
coating degradation, observe the following  
precautions.  
• To remove dust from the screen surface/  
cabinet, wipe gently with a soft cloth. If  
dust is persistent, wipe with a soft cloth  
slightly moistened with a diluted mild  
detergent solution.  
• Do not spray water or detergent directly  
on the TV set. It may drip to the bottom  
of the screen or exterior parts, and may  
cause a malfunction.  
• Never use any type of abrasive pad,  
alkaline/acid cleaner, scouring powder,  
or volatile solvent, such as alcohol,  
benzene, thinner or insecticide. Using  
such materials or maintaining prolonged  
contact with rubber or vinyl materials  
may result in damage to the screen  
surface and cabinet material.  
• Periodic vacuuming of the ventilation  
openings is recommended to ensure to  
proper ventilation.  
• When adjusting the angle of the TV set,  
move it slowly so as to prevent the TV  
set from moving or slipping off from its  
table stand.  
Disposal of  
waste batteries  
(applicable in the  
European Union  
and other  
European  
countries with  
separate  
collection  
systems)  
This symbol on the battery or on the  
packaging indicates that the battery  
provided with this product shall not be  
treated as household waste. On certain  
batteries this symbol might be used in  
combination with a chemical symbol. The  
chemical symbols for mercury (Hg) or lead  
(Pb) are added if the battery contains more  
than 0.0005% mercury or 0.004% lead. By  
Optional Equipment  
• Keep optional components or any  
equipment emitting electromagnetic  
radiation away from the TV set.  
Otherwise picture distortion and/or noisy  
sound may occur.  
GB  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
• Do not leave a disc in the console when  
moving or changing the position of the  
console.  
• Do not touch a disc while it is spinning.  
• Do not close the disc cover in a way that  
could pinch your hand or fingers.  
• Adjust the settings of the DVD player  
according to the instructions provided  
before playing a DVD.  
• Keep the console and accessories,  
including cable ties and fasteners, out of  
the reach of small children.  
Warning about  
Precautions  
about  
PlayStation 2  
PlayStation 2  
Caution  
Use of controls or adjustments or  
performance of procedures other than  
those specified herein may result in  
hazardous radiation exposure. The use of  
optical instruments with this product will  
increase eye hazard.  
Safety  
This product has been designed with the  
highest concern for safety. However, any  
electrical device, if used improperly, has  
the potential for causing fire, electrical  
shock or personal injury. To help ensure  
accident-free operation, follow these  
guidelines:  
When using software  
that supports the  
vibration function of the  
analog controller  
CLASS 1 LASER PRODUCT  
LUOKAN 1 LASERLAITE  
KLASS 1 LASERAPPARAT  
• Observe all warnings, precautions and  
instructions.  
• Stop use and unplug the AC power cord  
from the electrical outlet immediately if  
the device functions in an abnormal  
manner or produces unusual sounds or  
smells.  
• Never connect cables other than those  
specified in this manual to the network  
connector.  
• Contact the appropriate PlayStation™  
customer service helpline which can be  
found within every PlayStationand  
PlayStation2 format software manual  
if the device does not operate properly.  
(DUALSHOCK®2)  
Do not use the vibration function if you  
have any ailment or injury to the bones,  
joints or muscles of your hands or arms. In  
most cases, the vibration function can be  
set to “Off” in the options menu of the  
software.  
This appliance is classified as a CLASS 1  
LASER product under IEC60825-1: 2001.  
Read carefully before  
operating your  
PlayStation2 console  
Network (except Local  
Area Networks)  
A few people may experience epileptic  
seizures when viewing flashing lights or  
patterns in our daily environment. These  
persons may experience seizures while  
watching TV or playing video games,  
including DVD-Videos or games played  
on the PlayStation2 console. Players who  
have not had any seizures may nonetheless  
have an undetected epileptic condition.  
Consult your physician before operating  
the PlayStation2 console if you have an  
epileptic condition or experience any of the  
following symptoms while watching TV  
programmes or playing video games:  
altered vision, muscle twitching, other  
involuntary movements, loss of awareness  
of your surroundings, mental confusion,  
and/or convulsions.  
• A broadband Internet connection is  
required to connect to a network.  
• When you connect your PlayStation2  
console to a network, the Internet service  
provider may charge additional usage  
fees. In some cases, usage charges may  
be more than anticipated. For details,  
refer to the information provided in your  
service contract or contact your Internet  
service provider.  
Use and handling  
• When operating the unit, play in a well-  
lit room and keep a safe distance from  
the TV screen.  
• Avoid prolonged use of the console. To  
help prevent eye strain, take a break of  
about 15 minutes during every hour of  
play.  
• Stop using the console immediately if  
you experience any of the following  
symptoms. If the condition persists,  
consult a doctor.  
• Parents are encouraged to monitor  
children in online gaming to ensure safe  
and responsible Internet usage.  
Connecting with an  
Ethernet cable  
Do not connect Ethernet cables or  
telephone cords of the following types to  
the network connector:  
Lightheadedness, nausea, or a  
sensation similar to motion sickness  
Tired, uncomfortable or aching  
hands or arms  
Tired, dry or aching eyes  
Software title  
compatibility  
Some PlayStationor PlayStation™  
format software titles may perform  
differently on this console than they do on  
previous PlayStation2 or PlayStation™  
consoles, or may not perform properly on  
this console. For more information, visit  
ps2.  
• Do not use the console near water.  
• Ethernet cables not appropriate for use  
with a 10Base-T/100Base-TX network  
• Standard residential telephone lines  
• Any ISDN (digital) compatible phone or  
data line  
• PBX phone lines  
• Other “unknown” types of telephone  
lines  
• Do not place the console and connected  
accessories on the floor or in a place  
where they may cause persons walking  
by to trip or stumble.  
• Do not place the console or accessories  
on surfaces that are unstable, tilted or  
subject to vibration.  
• Do not expose the console or accessories  
to high temperatures, high humidity or  
direct sunlight (use in an environment  
where temperatures range from 5°C to  
35°C/41°F to 95°F).  
• Do not place the console in locations of  
poor ventilation such as small, enclosed  
areas, directly against a wall or on a thick  
carpet or bedding.  
2
Disc handling  
• Do not touch the disc surface when  
handling a disc; hold it by the edges.  
• Do not stick paper or tape onto discs and  
do not write on discs.  
• Fingerprints, dust, dirt or scratches on  
the disc can distort the picture or reduce  
sound quality. Always handle carefully  
and make sure discs are clean before use.  
• Do not expose the console to dust, smoke  
or steam.  
• Do not allow liquid or small particles to  
get into the console.  
• Do not leave discs near a heat source, in  
direct sunlight or in high humidity.  
• Do not put any objects on the console.  
• Store discs in their cases when not in use.  
• Do not touch or insert foreign objects  
into the connectors of the console or  
accessories.  
• Do not allow dust or foreign matter to  
build up around the console vents.  
Remove the dust with a low-powered  
vacuum cleaner.  
• Clean discs using a soft cloth, lightly  
wiping from the centre outwards. Do not  
use solvents such as benzine,  
commercially available cleaners not  
intended for CDs or anti-static spray  
intended for vinyl LPs.  
GB  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
• Do not use irregularly shaped discs (for  
example, heart- or star-shaped discs) or  
damaged, reshaped or repaired discs.  
• Do not place any rubber or vinyl  
materials on the console exterior for an  
extended period of time.  
Never disassemble the  
console or supplied  
accessories  
Use the PlayStation2 console and  
accessories according to the instructions in  
the product documentation. No  
authorization for the analysis or  
modification of the console, or the analysis  
and use of its circuit configurations, is  
provided. There are no user serviceable  
components inside the PlayStation™  
2
console. Disassembling the console will  
void the warranty. Additionally, there is a  
risk of exposure to laser radiation as well  
as to electrical shock hazards.  
Note on safety when  
playing DVDs or CDs  
If you set the volume too high, it may harm  
your hearing or damage the speakers.  
Exercise care when setting the volume.  
Moisture condensation  
If the console or disc is brought directly  
from a cold location to a warm one,  
moisture may condense on the lens inside  
the console or on the disc. Should this  
occur, the console may not operate  
properly. In this case, remove the disc and  
turn off and unplug the console. Do not put  
the disc back in until the moisture  
evaporates (this may take several hours). If  
the console still does not operate properly,  
contact the appropriate PlayStation™  
customer service helpline which can be  
found within every PlayStationand  
PlayStation2 format software manual.  
Cleaning  
• For safety reasons, before cleaning the  
console or connected accessories, 1) turn  
off the console, 2) disconnect the mains  
power plug for the console from the  
electrical outlet, and 3) disconnect the  
Ethernet cable from the console.  
• When cleaning the console, use a soft,  
dry cloth. Do not use solvents or other  
chemicals or a chemically-treated dust  
cloth to clean the product.  
• Do not touch the lens located inside the  
disc cover. To help protect the lens from  
dust, keep the disc cover closed except  
when inserting or removing discs.  
• The cooling fan maintains low  
temperature inside the PlayStation™  
console. If there is dust around the  
2
ventilation holes, temperature may rise  
inside of the PlayStation2 console and  
result in malfunction. Clean the  
ventilation holes on the side and rear of  
the PlayStation2 console regularly  
(preferably once a month).  
Exterior protection  
To help prevent damage to the painted  
parts, follow the precautions below:  
• Do not spill liquids such as alcohol,  
solvents or other chemicals on the  
product.  
GB  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote and TV Controls/Indicators  
Remote and TV/PlayStation 2 controls  
3
1
Buttons on the TV will work the same as those on the remote.  
* In the TV menu, these buttons will work as F/f/G/g/  
z
.
• The number 5, N, PROG + and AUDIO buttons on the remote have  
a tactile dot. Use the tactile dots as a reference when operating the  
TV.  
Button/Switch  
Description  
1 TV "/1 (TV  
Press to turn on the TV or to enter standby  
mode.  
standby)  
~
• When you turn the TV off, the TV and the  
built-in PlayStation 2 enter standby mode.  
2 1 (Power)  
Press to turn on the TV or to enter standby  
mode.  
~
• To disconnect the TV, turn off the TV, then  
unplug the AC power cord (mains lead) from  
the AC power (mains).  
• When you turn the TV off, the TV and the  
built-in PlayStation 2 enter standby mode.  
3 PlayStation2 Press to turn on the built-in PlayStation 2.  
POWER ON The TV and the PlayStation 2 turn on and the  
TV input mode is automatically switched to  
PlayStation 2 (page 35).  
GB  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Button/Switch  
Description  
4 Function  
Switches the TV function or the built-in  
4
5
buttons  
PlayStation 2 function on the remote and  
switches the input source between TV and  
PlayStation 2 automatically.  
5 Optional  
equipment  
operating  
buttons  
m/N/M/./x/>/X :  
6
7
8
When the BRAVIA Sync-compatible equipment  
is connected to the TV, you can operate the  
equipment via the TV remote, while viewing  
pictures from the equipment. When using the  
PlayStation 2 function, you can operate the  
CD/DVD player.  
THEATRE:  
9
0
Set “Theatre Mode” to on for optimum sound  
and picture quality of film-based content.  
SYNC MENU:  
Press to display the BRAVIA Sync Menu and  
then select connected HDMI equipment from  
“HDMI Device Selection”.  
~
• If you turn the TV off, “Theatre Mode” is also  
turned off.  
• When you change the “Scene Select” setting,  
“Theatre Mode” turns off automatically.  
• “Control for HDMI” (BRAVIA Sync) is only  
available for the connected Sony equipment  
that has the BRAVIA Sync or is compatible  
with “Control for HDMI”.  
6 DIGITAL/  
Press to switch between digital and analogue  
mode. When viewing pictures from connected  
equipment, press to return to the last viewed TV  
mode.  
ANALOG  
7 i-MANUAL  
Press to display the on-screen instruction  
manual.  
8
GUIDE  
(EPG)  
Press to display the Digital Electronic  
Programme Guide (EPG) (page 19).  
~
• This button is unavailable for PlayStation 2.  
9
RETURN TV function: Press to return to the previous  
screen or exit from the menu.  
PlayStation 2 function: Press to return to  
the previous screen on DVD menu.  
0 HOME  
Press to display the TV Home Menu (page 46).  
GB  
(Continued)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Button/Switch  
Description  
qa Coloured  
TV function: When the coloured buttons are  
qh  
qj  
buttons/DVD available, an operation guide appears on the  
buttons  
screen.  
PlayStation 2 function:  
DVD TOP MENU:  
qk  
Press to display the top menu.  
DVD MENU:  
Press to display the menu.  
DVD ANGLE:  
Press to change the viewing angle.  
DVD TIME:  
Press to display the current title or chapter  
number, elapsed time.  
qa  
qs Number  
In TV mode: Press to select channels. For  
channel numbers 10 and above, press the next  
digit quickly.  
buttons  
qs  
qd  
PlayStation 2 function: Press to enter a  
chapter number.  
In Text mode: Press to enter a page number.  
qf  
qg  
qd / (Text)  
Press to display text information (page 17).  
~
• This button is unavailable for PlayStation 2.  
qf 2 +/–  
Press to adjust the volume.  
(Volume)  
qg % (Mute)  
Press to mute the sound. Press again to restore  
the sound.  
qh  
qj  
/
(Input In TV mode: Press to display a list of inputs.  
select/Text  
hold)  
In Text mode: Press to hold the current page.  
(Screen  
mode)  
Press to change the screen format (page 18).  
qk INTERNET  
Press to access Internet content on the “XMB”  
VIDEO  
GB  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button/Switch  
Description  
ql  
Press to display the “Favourites” menu  
(Favourites) (page 20).  
(Info/ Each time you press the button, the display  
Text reveal) changes as follows:  
In digital mode: Details of the current  
w;  
/
programme t Details of the next programme  
In analogue mode: Current channel number  
and screen mode  
In Text mode: Reveals hidden information  
(e.g. answers to a quiz) (page 17).  
ql  
w;  
wa  
ws  
PlayStation 2 function: Control panel  
wa F/f/G/g/  
TV function: Press G/g/F/f to move the on-  
screen cursor. Press  
highlighted item.  
to select/confirm the  
PlayStation 2 function: Press G/g/F/f to  
move the on-screen cursor. Press  
confirm a highlighted item.  
to enter/  
wd  
ws OPTIONS  
Press to display a list of convenient functions  
and menu shortcuts. The menu items vary  
based on the current input and/or content.  
wf  
wg  
~
• This button is unavailable for PlayStation 2.  
wd  
(Subtitle  
setting)  
TV function: Press to turn subtitles on or off  
(when the feature is available).  
PlayStation 2 function: Press to turn  
subtitles on or off (when the feature is  
available).  
wf PROG +/–/  
In TV mode: Press to select the next (+) or  
previous (–) channel.  
In Text mode: Press to select the next ( ) or  
previous ( ) page.  
/
wg AUDIO  
TV function: Press to change the dual sound  
mode (page 53).  
For digital mode, press to change the language  
to be used for the programme currently being  
viewed (page 55).  
PlayStation 2 function: Press to change  
the multiple sound mode.  
GB  
(Continued)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indicators  
Indicator  
Description  
1 Ambient sensor  
Senses the ambient light level and adjusts the brightness and colour temperature  
of the picture accordingly. Do not put anything near the sensor, doing so may  
affect its function.  
2 Remote control  
Receives signals from the remote.  
Do not put anything near the sensor, doing so may affect its function.  
sensor  
3
(Picture Off / Lights up in green when you select “Picture Off” in “Power Saving” of “Eco”  
Timer)  
Lights up in orange when you set the timer (page 48).  
Lights up and/or blinks in orange during a software upgrade.  
4 1 (Standby)  
Lights up in red when the TV is in standby mode, PC power saving mode or  
during a software upgrade.  
5 " (Power)  
Lights up in green when the TV is on.  
GB  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Watching TV  
3
Press the number buttons or PROG +/– to  
select a TV channel.  
Watching TV  
To select a digital programme using the  
Digital Electronic Programme Guide  
(EPG), see page 19.  
In digital mode, an information banner  
appears briefly. Each time you press  
,
the banner changes cyclically as follows:  
Current programme information t Next  
programme information t No banner  
The following icons may be indicated on  
the banner.  
:
Interactive service is available  
(Digital Text)  
: Radio service  
: Scrambled/Subscription service  
Multiple audio languages available  
: Subtitles available  
2
:
: Subtitles available for the hearing  
impaired  
c: Reminder  
: Recommended minimum age for  
current programme (ages from 4 to  
18) (For Spain only: ages from 4 to  
18 and X)  
3
3
: Parental lock  
To access Text  
Press /. Each time you press /, the display  
changes cyclically as follows:  
Text and TV picture t Text t No Text (exit  
the Text service)  
To select a page, press the number buttons or  
/
.
To hold a page, press  
.
To reveal hidden information, press  
.
z
1
2
Press 1 on the TV to turn on the TV.  
You can also jump directly to a page by selecting  
the page number displayed on the screen. Press  
and F/f/G/g to select the page number, then press  
.
• When four coloured items appear at the bottom of  
the Text page, you can access pages quickly and  
easily (Fast Text). Press the corresponding  
coloured button to access the page.  
When the TV is in standby mode (the 1  
(standby) indicator on the TV front panel  
is red), press TV "/1 on the remote to  
turn on the TV.  
Press DIGITAL/ANALOG to switch to  
digital or analogue mode.  
The available channels vary depending on  
the mode.  
• Interactive service may be available if provided by  
a broadcaster.  
GB  
(Continued)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
To change the Screen Format manually  
Press repeatedly to select the desired  
Screen Format.  
Smart*  
Enlarges the picture to  
fill a 16:9 screen,  
preserving the original  
picture as much as  
possible.  
4:3  
Displays the 4:3 picture  
in its original size. Side  
bars are shown to fill  
the 16:9 screen.  
Wide  
Stretches the 4:3  
picture horizontally, to  
fill the 16:9 screen.  
Zoom*  
Displays the  
cinemascopic (letter  
box format) picture in  
the correct proportion.  
14:9*  
Displays a 14:9 picture  
in its original size. Side  
bars are shown to fill  
the 16:9 screen.  
* Parts of the top and bottom of the picture may be cut off.  
~
• When you select “Smart”, some characters and/or  
letters at the top and the bottom of the picture may  
not be visible. In such a case, adjust “Vertical  
Size” in the “Screen” menu (page 51).  
z
• When “Auto Format” (page 51) is set to “On”, the  
TV automatically selects the best mode to suit the  
broadcast.  
• If 720p, 1080i or 1080p source pictures are  
displayed with black borders on the screen edges,  
select “Smart” or “Zoom” to adjust the pictures.  
GB  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Using the Digital Electronic Programme Guide (EPG)  
1
In digital mode, press  
GUIDE.  
2
Perform the desired operation as shown in  
the following table or displayed on the  
screen.  
Item  
Description  
1 Information Box  
Shows information about the highlighted programme.  
Displays the last viewed programme before you entered the guide.  
Select a programme to watch or to be set as a reminder.  
2 Video Window  
3 Programme  
Listing Grid  
4 Channel  
Displays a channel title and number for a broadcaster.  
Information  
5 Category  
Category name (e.g. “Guide Favourites 1”) contains all channels corresponding  
to the category.  
z
• The OPTIONS Menu allows you to select the following menu items.  
– “Programme Genre List”: Search programmes by genre.  
– “Guide Favourites Set-up”: Registers your preferred programmes for any categories.  
– “Timer list”: Set a programme to be displayed on the screen when it starts.  
GB  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Favourites  
The “Favourites” feature provides quick access to your frequently used items, such as preferred TV  
channels or external inputs (e.g. game console, DVD player). In addition, your favourite media files  
and Internet contents can be shown in the “Favourites” screen.  
~
• Internet content (e.g. Internet Video) may not be available in some regions/countries.  
Displaying Your Favourites  
1
Press  
.
YI-TV THREE  
HDMI  
1
AV2  
PC  
Piano 003 TV FLOWERS  
Recommendations  
0728photo  
Photos  
2
Select the desired icon listed at the bottom of the screen by using the remote, and press  
expand it into a full view.  
to  
z
• A slideshow automatically starts when a folder of photos is selected.  
Displaying Your Recently Viewed Items  
By selecting the “Recently Viewed” stack of items in the “Favourites” screen, you can display a  
history of content you have recently viewed. The “Recently Viewed” list is erased whenever the TV  
is powered off.  
YI-TV THREE  
PC  
0728photo  
Piano  
Recommendations  
HDMI  
1
AV2  
003 TV FLOWERS  
Recently Viewed YI-TV THREE 12:00 PM  
z
• “Recently Viewed” items are displayed in a stack list. Press F/f to move between the items.  
GB  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Recommendations  
The “Recommendations” feature automatically analyses your interests by referencing your viewing  
history to find programmes and items you may like, and presents them in the “Favourites” menu. To  
activate this feature, select “On” in “Recommendation” of “General Set-up” (see page 48).  
YI-TV THREE  
0728photo  
Piano 003 TV FLOWERS  
HDMI  
1
AV2  
PC  
Recommendations  
Recommendations  
z
• Recommended programmes that are currently being broadcast are displayed in a stack list of items. Press  
to expand the selected item into a full view.  
~
• The “Recommendations” feature may not be available depending on your region, country and broadcasting  
conditions.  
Adding/Removing Favourites  
You can add/remove your favourite items through the “XMB” or while you are displaying content  
on the screen.  
1
2
Press OPTIONS after selecting the desired item on the “XMB”.  
Select “Add to Favourites” or “Remove from Favourites”.  
GB  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Optional Equipment  
Connecting Optional Equipment  
You can connect a wide range of optional equipment to your TV.  
IN  
2
3
AV  
2
L
(MONO)  
R
Connecting audio-video equipment (quality order, high to low)  
Connect to  
Connect with  
HDMI cable  
Description  
4, 0  
HDMI (High-Definition Multimedia Interface) provides an  
uncompressed, all-digital audio/video interface between this  
TV and any HDMI-equipped audio/video equipment. In  
addition, when you connect the equipment that is compatible  
with “Control for HDMI”, communication with the  
connected equipment is supported.  
HDMI IN 1, 2, 3,  
or 4  
~
• Be sure to use only an authorised HDMI cable bearing the  
HDMI logo.  
• If connecting a digital audio system that is compatible with  
Audio Return Channel (ARC) technology, use the HDMI  
IN 1. If not, an additional connection with DIGITAL  
AUDIO OUT (OPTICAL) is necessary.  
GB  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connect to  
Connect with  
Description  
• If the equipment has a DVI jack (socket), connect it to the  
HDMI IN 4 through a DVI - HDMI adaptor interface (not  
supplied), and connect the equipment’s audio out jacks  
(sockets) to the PC/HDMI 4 AUDIO IN which is located in  
the PC IN.  
7
/
Component video  
cable, audio cable  
COMPONENT IN  
1
/
AV1  
SCART cable  
When you connect an analogue decoder, the TV tuner outputs  
scrambled signals to the decoder, and the decoder  
unscrambles the signals before outputting them.  
qa  
AV2, and  
AV2  
Composite video When connecting a mono equipment, connect to the  
cable L jack (socket).  
AV2  
Connecting audio/portable equipment  
Connect to  
Connect with  
Audio cable  
Description  
6
(VAR/FIX)  
You can listen to TV sound on the connected Hi-Fi audio  
equipment.  
5 DIGITAL  
AUDIO OUT  
(OPTICAL)  
Optical audio  
cable  
You can listen to TV sound on the connected Home theatre  
system with digital input.  
9
USB  
USB cable  
You can enjoy photo/music/video files stored in USB device  
Connecting other equipment  
Connect to  
Connect with  
Description  
3
PC IN  
PC cable with  
ferrites, audio  
cable  
It is recommended to use a PC cable with ferrites, such as the  
“Connector, Mini D-sub 15” (ref. 1-793-504-11, available in  
Sony Service Centre), or an equivalent.  
2
8
LAN  
LAN cable  
You can enjoy contents stored in DLNA-compatible devices  
via a network (page 27).  
CAM  
Provides access to pay TV services. For details, refer to the  
instruction manual supplied with your CAM.  
(Conditional  
Access Module)  
z
• Do not insert the smart card directly into the TV CAM  
(Conditional Access Module) slot. It must be fitted into the  
Conditional Access Module provided by your authorised  
dealer.  
~
• CAM is not supported in some countries/areas. Check with  
your authorised dealer.  
qs i Headphones  
You can listen to TV sound through headphones.  
GB  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing Pictures from  
Connected Equipment  
Playing back Photo/Music/  
Video via USB  
You can enjoy photo/music/video files stored  
in a Sony digital still camera or camcorder  
through a USB cable or USB storage device on  
your TV.  
1
Turn on the  
connected  
equipment.  
2
Press  
and select  
1
Press HOME and select the listed USB  
devices under the “Photo”, “Music” or  
“Video” category.  
the desired input  
source.  
2
Select files or folders to play from the list  
on the selected USB device.  
To view two pictures simultaneously  
PAP (Picture and Picture)  
“PAP” displays two pictures at the same time  
from connected equipment and TV  
programme/composite video except SCART  
connector.  
Photo Playback Auto Start  
Photo playback automatically starts when you  
connect a USB storage device after turning on  
the TV, and “Slideshow” or “Thumbnail View”  
is selected in the “USB Auto Start” settings  
~
• This function is not available with PC input.  
1
2
Press OPTIONS.  
~
• When connecting a Sony digital camera to the TV  
with a USB cable, USB connection settings on  
your camera need to be set to “Auto” or “Mass  
Storage” mode.  
Select the “PAP” from the OPTIONS  
Menu.  
3
Press G/g to switch audio output between  
the two pictures. The highlighted picture  
is audible.  
• Video files are located in the following folder  
structure (hierarchal position):  
/AVCHD/BDMV/STREAM/00000.MTS  
/PRIVATE/AVCHD/BDMV/STREAM/  
00000.MTS  
/MP_ROOT/100ANV01/MAHA0001.MP4  
• Avoid losing your files by backing up all your  
media files stored on USB equipment. Sony  
cannot accept responsibility for lost or damaged  
data stored on USB equipment.  
• BRAVIA TV supports DivX®.  
• Check the website below for updated information  
about compatible USB devices.  
• USB Photo Viewer supports FAT12, FAT16 and  
FAT32 file systems.  
• USB playback of the following photo file formats  
is available:  
To view two pictures simultaneously  
– PIP (Picture in Picture)  
“PIP” displays a picture from the connected  
PC in the full screen, and a TV programme or  
composite video except SCART connector in  
an inset window.  
1
2
Press OPTIONS.  
Select the “PIP” from the OPTIONS  
Menu.  
3
Use the OPTIONS Menu to switch audio  
output between the two pictures.  
– JPEG (JPEG format files with the extension  
“.jpg” and conforming to DCF or Exif)  
– RAW (ARW/ARW 2.0 format files with the  
extension “.arw”) (preview only)  
• USB playback is supported for the following  
music file format:  
– MP3 (files with the extension “.mp3” that have  
not been copyrighted)  
GB  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
• USB playback is supported for the following  
video file format:  
AVCHD (files with the extension “.mts” or  
“.m2ts”)  
– MP4 (AVC) (files with the extension “.mp4”)  
– MPEG1 (files with the extension “.mpg”)  
• Avoid losing your files by backing up all your  
media files stored on a USB device. Sony cannot  
accept responsibility for lost or damaged data  
stored on a USB device.  
To display a photomap  
By connecting a digital still camera with GPS  
function, you can display a photograph with a  
map of the location where the photograph was  
taken. To use this feature, the TV has to be  
connected to the Internet to download map  
information.  
1
2
3
Select a photograph by using the “XMB”.  
Press f/F to zoom in/out on the map.  
• This feature is not supported with the USB  
connector on the front of PlayStation 2.  
Press the far left coloured button  
repeatedly to change the display position  
of the map.  
To display a photograph  
— Picture Frame  
~
You can display a photograph on the screen for  
a selected period of time. After that period, the  
TV automatically switches itself into standby  
mode.  
• Only a large-scale map that cannot be zoomed in  
or out is displayed if the TV is not connected to  
the Internet or the online map service is  
terminated.  
• The position indicated on the map may differ  
depending on the image capture device.  
• The Internet online map service is provided by a  
third party. For this reason, service may be  
changed or terminated without prior notification.  
1
2
Select a photograph.  
Press OPTIONS while the selected  
photograph is displayed, then press F/f to  
select “File Options” and press  
Press F/f to select “Picture Frame Image”  
and press  
.
3
4
.
Press HOME, then press G/g to select  
“Photo”, then select “Picture Frame” and  
press  
.
The TV is switched to Picture Frame  
mode, and the selected photograph is  
displayed on the screen.  
To set the duration of displaying a  
photograph  
Press OPTIONS, then select “Duration”  
and press . Then, select the duration,  
and press  
.
The counter appears on the screen.  
~
• If the photograph is selected from a USB device, it  
must remain connected to the TV.  
• If “Sleep Timer” is activated, the TV  
automatically will switch into standby mode.  
GB  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
BD/DVD Player  
Using BRAVIA Sync with  
Control for HDMI  
With the “Control for HDMI” function,  
BRAVIA Sync helps to communicate with  
BRAVIA Sync-compatible equipment using  
HDMI CEC (Consumer Electronics Control).  
Use the following settings and tips to help  
unify control of your connected equipment.  
Automatically turns the BRAVIA Sync-  
compatible equipment on and switches the  
input to that equipment when you select it  
from the Home Menu or Sync Menu.  
Automatically turns the TV on and  
switches the input to the connected  
equipment when the equipment starts to  
play.  
Automatically turns the connected  
equipment off when you switch the TV to  
standby mode.  
1
2
3
Press HOME.  
Press G/g to select “Settings”.  
Press F/f to select “External Inputs” and  
AV Amplifier  
press  
.
Automatically turns the connected AV  
amplifier on and switches the sound output  
from the TV speaker to the audio system  
when you turn the TV on. This function is  
only available if you have previously used  
the AV amplifier to output TV sound.  
4
Press F/f to select “Control for HDMI” in  
“HDMI Set-up”, then select “On”.  
z
• “Control for HDMI” (BRAVIA Sync) is only  
available for the connected Sony equipment that  
has the BRAVIA Sync or is compatible with  
“Control for HDMI”.  
• The “Control for HDMI” settings must be set on  
both the TV and connected equipment. For  
settings on the connected equipment, refer to their  
instruction manuals.  
• When specific Sony equipment compatible with  
“Control for HDMI” (BRAVIA Sync) is  
connected, BRAVIA sync is automatically  
activated on the equipment.  
Automatically switches the sound output to  
the AV amplifier by turning the AV  
amplifier on when the TV is turned on.  
Automatically turns the connected AV  
amplifier off when you switch the TV to  
standby mode.  
Adjusts the volume (2 +/–) and mutes the  
sound (%) of the connected AV amplifier  
through the TV’s remote.  
Controlling BRAVIA Sync-Compatible  
Equipment  
When connecting a digital audio system  
that is compatible with Audio Return  
Channel (ARC) technology, connect to  
HDMI IN 1 with an HDMI cable. If  
connecting a system that is incompatible  
with “Control for HDMI” or Audio Return  
Channel, an additional audio connection  
via DIGITAL AUDIO OUT (OPTICAL) is  
necessary.  
BRAVIA Sync-compatible equipment is listed  
as a new input source under “External Inputs”  
in the Home Menu (page 46). To control the  
equipment by using the remote, press SYNC  
MENU and select the desired equipment from  
“HDMI Device Selection”.  
Sync Menu  
HDMI 1  
HDMI Device Selection  
Device Control  
Speakers  
Video Camera  
Automatically turns the TV on and  
switches the input to the connected video  
camera when the connected video camera  
is turned on.  
TV Control  
Return to TV  
Automatically turns the connected video  
camera off when you switch the TV to  
standby mode.  
GB  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Home Network Features  
With this TV, you can enjoy contents stored in  
DLNA-compatible devices on the home  
network.  
Connecting to the Network  
Devices that store and provide contents, such  
as photo/music/video files, are called “Server”.  
The TV receives the photo/music/video files  
from the server via the network, and you can  
enjoy them on the TV even in other rooms.  
To enjoy the home network, a DLNA-  
compatible device (VAIO, Cyber-shot, etc.) is  
necessary as a server.  
Make either the wired connection (see the  
following “Connecting to the Network”), or  
wireless connection (see “Wireless LAN  
Ready” on page 28).  
TV  
Network  
cable  
(not  
supplied)  
In addition, when you connect your TV to the  
Internet, you can enjoy displaying a  
photograph that shows its location on the map  
(page 25), or enjoy Internet video (page 29).  
Router  
~
To network devices  
You will need to contract with an Internet service  
provider to connect to the Internet.  
Network cable (not supplied)  
DSL modem/  
Cable modem  
Internet  
GB  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Network Set-up  
Wireless LAN Ready  
The start-up screen of “Network Set-up”  
allows you to select a setting procedure  
according to your network environment.  
“View Network Status”: Select to confirm  
your network status.  
Wireless LAN Ready lets you easily access the  
Internet and your home network with the USB  
Wireless LAN Adapter UWA-BR100 (as of  
January 2010). By inserting the USB Wireless  
LAN Adapter into your TV’s USB port, you  
can easily create a cable-free network.  
“Wired Set-up”: Use to connect to a wired  
network.  
“Wireless Set-up”: Use to connect to a  
wireless network.  
Secured Network with Wi-Fi  
Protected Setup (WPS)  
The WPS standard makes security of a  
wireless home network as straightforward as  
pressing the WPS button on the wireless LAN  
router. Before setting up a wireless LAN,  
check the position of the WPS button on the  
router and verify how to use it.  
~
• Before setting up the wireless LAN function of the  
TV, be sure to set up a wireless LAN router.  
• The USB Wireless LAN Adapter is supplied or  
available as an optional accessory, depending on  
your TV model. In some regions/countries, the  
USB Wireless LAN Adapter may not be available.  
• This feature is not supported with the USB  
1
Select “Wireless Set-up” from the  
“Network Set-up” start-up screen.  
2
Select “WPS (Push Button)” for Push  
Button method or “WPS (PIN)” for PIN  
method.  
connector on the front of PlayStation 2.  
3
Follow the instructions appeared on the  
set-up screen.  
Connecting to Your Wireless LAN  
~
Using the Wireless LAN Ready feature you  
can connect the TV to your wireless LAN. The  
set-up procedure differs depending on the type  
of wireless LAN and wireless LAN router.  
Before setting up a wireless LAN, check your  
wireless LAN environment using the  
following chart.  
• To connect to a wireless LAN with WPS, your  
wireless LAN router needs to support the WPS  
standard.  
Secured Network without Wi-Fi  
Protected Setup (WPS)  
For setting up a wireless LAN, SSID (wireless  
network name) and security key (WEP or  
WPA key) will be required. If you do not know  
them, consult the instruction manual of your  
router.  
1
Secure wireless LAN ?  
YES: Go to 2.  
NO: Configure the following “Network  
Set-up” and “Unsecured Network with  
Any Type of Wireless LAN Router”.  
1
2
3
Select “Wireless Set-up” from the  
“Network Set-up” start-up screen.  
2
Do you use a wireless LAN router  
compatible with Wi-Fi Protected Setup  
(WPS) ?  
Select “Scan”, then select a network from  
the list of scanned wireless networks.  
YES: Configure the following “Network  
Set-up” and “Secured Network with Wi-Fi  
Protected Setup (WPS)”.  
Follow the instructions that appear on the  
set-up screen.  
NO: Configure the following “Network  
Set-up” and “Secured Network without  
Wi-Fi Protected Setup (WPS)”.  
GB  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Unsecured Network with Any Type  
of Wireless LAN Router  
Enjoying BRAVIA Internet  
Video  
BRAVIA Internet Video serves as a gateway to  
Internet content, delivering a variety of on-  
demand entertainment straight to your TV. By  
making a broadband Internet connection, you  
can enjoy video content, including movies and  
cartoons.  
For setting up a wireless LAN, SSID (wireless  
network name) will be required. Security key  
(WEP or WPA key) will not be required  
because you need to select no security method  
in this procedure.  
1
2
3
Select “Wireless Set-up” from the  
“Network Set-up” start-up screen.  
~
Select “Scan”, then select a network from  
the list of scanned wireless networks.  
• Be sure to connect your TV to the broadband  
Internet and complete the initial set-up and  
“Network Set-up” (page 56).  
Follow the instructions appeared on the  
set-up screen.  
To Use Internet Video  
You can seek forward or seek backward in the  
video content. (This feature is available  
depending on Internet content services.)  
1
2
Press INTERNET VIDEO.  
Press F/f/G/g to select the desired video  
icon to be displayed and press  
To return to single picture mode  
Press RETURN.  
.
z
• The interface to Internet content depends on the  
Internet content providers.  
• Services block video content based on the  
“Parental Lock” setting of the TV. Some service  
providers do not support this function.  
• To update BRAVIA Internet Video content  
services, select “Settings” in the Home Menu, then  
select “Refresh Internet Content” in “Network”  
GB  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Enjoying Photo/Music/  
Video Files via the Network  
Checking the Network  
Connection  
Enjoy various content, such as photo/music/  
video files, stored in DLNA Certified media  
server on your home network. With the home  
network feature, you can enjoy the Internet  
and/or network content on the TV even in  
other rooms. To enjoy your home network,  
DLNA Certified equipment (e.g. VAIO) is  
necessary as a server.  
Enter the respective alphanumeric values for  
your router if necessary. The items that need to  
be set (e.g. IP Address, Subnet Mask, DHCP)  
may differ depending on the Internet service  
provider or router. For details, refer to the  
instruction manuals provided by your Internet  
service provider, or those supplied with the  
router.  
1
2
Press HOME.  
1
2
3
Press HOME.  
Press G/g to select the listed media  
servers under the “Photo”, “Music” or  
“Video” category.  
Press G/g to select “Settings”.  
Press F/f to select “Network”, then press  
.
3
Press F/f to select files or folders to play  
from the list on the selected media server.  
4
5
Select “Network Set-up”, then press  
.
Select “Auto” to set the IP Address and  
proxy server automatically, or “Custom”  
to set them manually.  
~
• Files from a network device need to be compatible  
with the following file formats.  
Follow the instructions appeared on the  
set-up screen.  
– Still images: JPEG format  
– Music: MP3 format or linear PCM format  
– Video: The following file formats stored on the  
server: AVCHD or MPEG2 format (not playable  
in some cases)  
The start-up screen allows you to select a  
setting procedure according to your  
network environment.  
To enjoy photographs, music and  
videos on the TV screen by operating  
devices  
“View Network Status”: Select to confirm  
your network status.  
“Wired Set-up”: Use to connect to a wired  
network.  
– Renderer  
“Wireless Set-up”: Use to connect to a  
wireless network.  
You can play back photo, music and video files  
stored in network devices (e.g. digital still  
cameras, mobile phones) on the TV screen by  
directly operating the target device. The  
network device should also be renderer-  
compatible.  
1
2
3
Press HOME.  
Press G/g to select “Settings”.  
Press F/f to select “Network”, and then  
set “Renderer Function”, “Renderer  
Access Control” and “Renderer Set-up” in  
“Renderer” if necessary (page 57).  
4
Play back media files by using the  
network devices.  
GB  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Adjusting the Server  
Display Settings  
You can select home network servers to be  
displayed on the Home Menu.  
Up to 10 servers can be displayed in the Home  
Menu automatically.  
1
2
3
Press HOME.  
Press G/g to select “Settings”.  
Press F/f to select “Network”, then press  
.
4
5
Select “Server Display Settings”, then  
press  
.
Select the server you want to display on  
the Home Menu, and adjust the settings.  
If you cannot connect to your home  
network  
The TV detects if the server is being correctly  
recognised when you cannot connect it to your  
home network. If the diagnostic results  
indicate a failure, check possible causes, and  
network connections and settings.  
1
2
3
Press HOME.  
Press G/g to select “Settings”.  
Press F/f to select “Network”, then press  
.
4
Select “Server Diagnostics”, then press  
.
The server diagnostic starts.  
When the server diagnostic is complete,  
the diagnostic result list appears.  
GB  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using PlayStation 2  
About Advanced Operations of the PlayStation 2  
The PlayStation2 User’s Guide is provided for further operation of the PlayStation2. The User’s  
Guide (in PDF format) is accessible from a PC through the Internet and contains information on  
performing advanced operations, technical specifications and other information.  
corresponding User’s Guide.  
Part Names  
Front  
OPEN  
Connect to  
Description  
1 MEMORY CARD slot 1/2  
2 Controller port 1/2  
Insert a memory card (page 36).  
Insert the Analog Controller (DUALSHOCK®2) into a controller  
port of the PlayStation 2 (page 35).  
3
USB connector  
You can connect various USB devices to the built-in PlayStation 2,  
but not all are compatible. Refer to the instructions supplied with the  
USB device for more information.  
~
You cannot play photo, music, video files using the PlayStation’s  
USB connector.  
4 Disc cover  
Press the OPEN button, and the cover slides open.  
5 OPEN button  
Press to open the disc cover.  
6 "/1 (on/standby)/RESET  
button  
Press to turn on the built-in PlayStation 2, to enter standby mode, or  
to reset.  
RESET: Press once.  
Standby: Press for more than one second.  
7 "/1 (on/standby) indicator  
Lights up in green when the built-in PlayStation 2 is on.  
Lights up in red when the built-in PlayStation 2 is in standby mode.  
GB  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Rear  
1
2
Connect to  
Description  
1
LAN  
You can enjoy online games by connecting the PlayStation 2 to a  
broadband network (page 37).  
~
• To enjoy “BRAVIA” home network features, connect to LAN of the  
TV using an Ethernet cable (page 42).  
2 DIGITAL AUDIO OUT  
(OPTICAL)  
You can listen to the built-in PlayStation 2 sound on a Home theatre  
system connected via digital input.  
GB  
(Continued)  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Analog controller (DUALSHOCK®2)  
Button/Switch  
Description  
1 L2 button  
2 L1 button  
3 SELECT button  
4 Directional buttons  
5 Left analog stick/ L3 button  
z
• The left analog stick and L3 button, function only in analogue mode  
(indicator: red).  
• The L3 button function when the analog stick is pressed.  
6 ANALOG mode button  
Switch between digital mode and analogue mode.  
7 Mode indicator  
Digital mode: Lights off.  
Analogue mode: Lights up in red.  
z
• Depending on the software, you may not be able to switch modes  
even if you press the ANALOG mode button.  
8 R2 button  
9 R1 button  
q; START button  
qa f/a/×/s buttons  
qs Right analog stick/ R3  
button  
z
• The right analog stick and R3 button, function only in analogue  
mode (indicator: red).  
• The R3 button function when the analog stick is pressed.  
z
• Depending on the software, the buttons for use in analogue mode may be limited. Refer to the instructions  
supplied with the software for details.  
• The vibration function can be set to on or off in the software options menu. Depending on the software, the  
vibration function may be set to on automatically.  
GB  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up the  
Playing Content  
You can play games, DVD-Videos and audio  
CDs on the PlayStation2.  
PlayStation 2  
You can enjoy playing games, watching  
movies and listening to music via the built-in  
PlayStation2.  
1
Connect the Analog Controller  
(DUALSHOCK®2) to a controller port in  
the front of the built-in PlayStation2.  
OPEN  
1
2
3
Press the OPEN button to release the disc  
cover lock.  
Slide the disc cover to the left, then place  
the disc with the label side facing up.  
Close the disc cover by sliding it to the  
right until it is locked.  
~
• Be sure to lock the disc cover to play a disc.  
Playing a Game  
You can play PlayStation2 and PlayStation™  
format software on the built-in PlayStation2.  
2
Press PlayStation 2 POWER ON on  
the remote to turn on the TV and the  
PlayStation2. (The TV input mode is  
automatically switched to  
To start a game  
Insert a disc to start playback.  
~
PlayStation2.)  
• To end a game, press PlayStation 2 "/1 (on/  
standby)/RESET button on the console front  
after saving game data, and then remove the disc  
~
• When you turn the TV off, the PlayStation 2 is  
also turned off. In addition, when functions below  
are activated, the PlayStation 2 will also be  
turned off in conjunction with the TV.  
– Idle TV Standby  
– Sleep Timer  
– PC Power Management  
– Reminder  
– On Timer  
– Picture Frame  
• Do not access the memory card when a warning  
message (such as, “the TV will soon turn off...”)  
appears.  
GB  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Using the Analog Controller  
(DUALSHOCK®2)  
Using Memory Cards  
You can save and load game data using a  
memory card (sold separately). You can also  
delete game data or copy game data from one  
memory card to another.  
The Analog Controller (DUALSHOCK®2) is  
equipped with pressure-sensitive buttons and  
sticks. This enables you to control game action  
with enhanced precision based on the force  
with which buttons are pressed or the angle at  
which the analog stick is tilted. It is also a  
force feedback controller with a vibration  
function.  
Memory card types  
There are two types of memory cards. Select  
the memory card type suitable for the software  
in use.  
Memory card for PlayStation 2; SCPH-10020 E  
~
– Compatible software: PlayStation 2 format  
• Depending on the game, you may need to set the  
controller to either digital or analogue mode. Press  
the ANALOG mode button of the controller to  
switch to the analogue mode. To return to digital  
mode, press the ANALOG mode button again.  
Some games make this adjustment automatically.  
software  
– Amount of memory: Approximately 8 MB  
Memory card; SCPH-1020 E (This product is no  
longer manufactured.)  
– Compatible software: PlayStation format  
software  
– Amount of memory: 15 memory blocks  
(approximately 120 KB)  
~
• MagicGate™ is a term of copyright-protection  
technology developed by Sony Corporation.  
To insert a memory card  
Insert the memory card into a memory card  
slot. Some games designate a specific memory  
card slot to use.  
MEMORY CARD  
MEMORY CARD  
To copy or delete saved data  
You can delete saved data or copy data to  
another memory card. Use directional buttons  
and the  
items.  
button of the controller to select  
GB  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
1
2
Turn on the built-in PlayStation2 with  
no disc inserted, and then insert a memory  
card.  
Playing Online Games  
You can play online games by connecting the  
built-in PlayStation2 to a network.  
Items you will need  
Select “Browser”, and then select the  
memory card you want to copy or delete  
data from.  
A network compatible PlayStation2 game  
Broadband Internet service  
3
4
Select the icon for the data item, and  
select “Copy” or “Delete”.  
A commercially available Ethernet cable  
A memory card (8MB) (for PlayStation2)  
(sold separately)  
Follow the instructions that appear on the  
set-up screen.  
Creating a Network  
Configuration  
When playing online games, insert a  
commercially available Ethernet cable into the  
network connector, and then create a network  
configuration. Refer to the instructions  
supplied with the online game for creating a  
network configuration.  
GB  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Watching a DVD  
You can play DVDs on the built-in  
PlayStation2.  
To start a DVD  
Insert a disc to start DVD playback.  
Operating the DVD Player  
Press the SELECT button on the Analog  
Controller then select an icon.  
GB  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Control panel items  
Icon  
Description  
Menu  
Displays the menu  
Top Menu  
Displays the top menu  
O
Return  
Returns to the previously selected screen  
Displays and changes audio options  
Displays and changes viewing angles  
Displays and changes subtitle options  
9
Audio Options  
Angle Options  
Subtitle Options  
Go To  
Skips to the selected title, chapter or the specified time, and starts  
playback  
Setup  
Displays and changes options for language, picture quality, Parental  
Control level, audio, etc.  
Time Display  
Help  
Displays the current title or chapter number, elapsed time, etc.  
Displays the direct button functions of the Analog Controller  
(DUALSHOCK®2)  
0-9  
Go to Chapter  
Previous/Next  
Used to enter the number of a chapter you want to play  
./>  
Returns/skips to the beginning of the current, previous or next  
chapter  
/
/
Search  
Slow  
Fast reverses/forwards playback  
Changes to playback/reverse playback in slow-motion  
Starts playback  
N
X
Play  
Pause  
Stop  
Pauses playback  
x
Stops playback  
A-B Repeat  
Specifies a scene for playback, and starts playback of the scene that  
has been set  
Shuffle Play  
Begins playback of titles or chapters in a random order  
Programme Play  
Repeat Play  
Begins playback of titles or chapters in a programmed sequence  
S
Selects repeated playback of all the titles on the disc, or one title or  
one chapter  
Original/Play List For DVD-RW discs (VR mode), selects Original or Play List content  
to play  
Clear  
Clears selected numbers or playback modes  
z
• Selecting x (Stop) again after playback is stopped clears resume play (playback from the last stopping  
point).  
• Some control panel options cannot be selected during resume play. To select these options, cancel resume  
play by selecting x (Stop) on the control panel and then selecting x (Stop) again after playback is stopped.  
GB  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Control Settings  
Compatible Software  
From the control panel, select “Setup”, and  
then select “Parental Control” in “Custom  
Setup”.  
Follow the instructions to register or enter the  
password. After the password is registered or  
entered, proceed through the various screens to  
select a region and parental control level.  
DVD  
– PlayStation2 format DVD-ROM  
– DVD-ROM (DVD-Video)  
– DVD+R/DVD+RW  
– DVD-R/DVD-RW (Video mode / VR  
mode)  
CD  
z
– PlayStation2 format CD-ROM  
– PlayStationformat CD-ROM  
– CD-DA (Audio CD)  
• If you select “Other” in the region options, see  
~
• For the parental control level, note that the lower  
the value, the stricter the restriction.  
• Some discs may not be playable due to scratches,  
dust or recording problems.  
• To clear the parental control setting, set the option  
to “Off”.  
• To change your password, select “Change  
Password” from the parental control options and  
follow the instructions to complete the operation.  
• The audio CD playback feature of this product is  
designed to conform to the Compact Disc (CD)  
standard. Recently, some record companies have  
started marketing music discs encoded with  
copyright protection technologies. Some of these  
music discs do not conform to the CD standard  
and may not be playable on this product.  
• A DualDisc is a two sided disc product that  
contains DVD recorded material on one side and  
digital audio material on the other side. However,  
since the audio material side does not conform to  
the Compact Disc (CD) standard, playback on this  
product is not guaranteed.  
Temporary override of parental control  
restrictions  
Start DVD playback. When prompted by the  
system, select “Yes”, and then enter the  
password.  
z
You cannot change the parental control setting  
without a password.  
• Do not play illegally copied discs. This may cause  
a malfunction or damage to the PlayStation 2.  
• When DVD playback is stopped, the parental  
control level will return to its default setting.  
• If you forget your password, insert a DVD without  
the parental control feature. In the control panel,  
select x (Stop) to stop playback, and then select  
x (Stop) again to clear resume play. Select  
“Setup”, and then select “Parental Control” in  
Region codes  
Some discs are assigned region codes for each  
geographic sales region. The built-in  
PlayStation2 can play discs with the  
following region codes.  
“Custom Setup”, and then press the  
button.  
Press the SELECT button on the Analog  
Controller, and then enter the number “7444”.  
DVD :  
,
(Except RU),  
(RU)  
PlayStation2 format DVD-ROM/CD-  
ROM :  
PlayStationformat CD-ROM :  
DVD-Videos  
The built-in PlayStation2 can only play discs  
recorded for the PAL broadcast standard.  
DVD-R, DVD-RW, DVD+R and DVD+RW  
discs  
Only discs that have been finalised can be  
played.  
GB  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Copy-protected video from a digital  
broadcast recorded on Content Protection  
for Recordable Media (CPRM) compatible  
DVD-RW discs or on CPRM compatible  
DVD-R discs cannot be played on the built-  
in PlayStation2.  
Internet Settings of the  
Built-in PlayStation 2  
You can enjoy online games by connecting the  
PlayStation2 to a broadband network. To  
play all online games, you will need the  
following:  
A network compatible PlayStation2 game  
Broadband Internet service  
A commercially available Ethernet cable  
A memory card (8MB) (for PlayStation2)  
(sold separately)  
z
You cannot play online games using a dial-up or  
ISDN connection.  
• USB connectivity from the External Network  
Device to the USB connector is not supported.  
• There are two types of Ethernet cables: straight-  
through cable and crossover cable. Ensure that you  
use the correct type of cable when connecting the  
PlayStation 2 to your Broadband Internet  
connection. Refer to the instructions supplied with  
the network device, or your Broadband Internet  
Service Provider for details.  
• Do not connect to the TV LAN using the Ethernet  
cable.  
GB  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the Built-in  
PlayStation 2  
Connecting with an  
Ethernet Cable  
You can connect the built-in PlayStation2 to  
a network using an Ethernet cable connected  
to the NETWORK connector on the rear. You  
can connect to a 100 Base-TX or 10 Base-T  
network. Refer to the instructions supplied  
with the network device for details.  
Built-in PlayStation  
2
Basic Network Setup  
Network line  
Network cable (not supplied)  
PC  
Broadband modem,  
router etc.  
Router  
Network equipment  
Ethernet cable  
(not supplied)  
To network devices  
Network line: This will vary depending on  
the type of broadband service in your home.  
Network equipment: The type of  
equipment used will also vary depending on  
the type of service.  
Network cable (not supplied)  
DSL Modem/Cable Modem  
z
• When connecting the built-in PlayStation 2 and a  
PC to the network, a network device such as a  
router or a hub may be required. Refer to the  
instructions supplied with the network device for  
details.  
Internet  
• For more information on network setup, see  
1
2
Connect the Ethernet cable to the  
NETWORK connector on the rear.  
Connect the Ethernet cable to the network  
device.  
~
• Do not plug the AC power cord (mains lead) for  
the built-in PlayStation 2 into the electrical outlet  
until you have made all other connections.  
• Do not connect Ethernet cables or telephone cords  
of the following types to the network connector;  
too much electrical current may pass through the  
connector, causing a malfunction, excessive heat  
or fire in the connector:  
– Standard residential telephone lines  
– Ethernet cables not appropriate for use with a  
10Base-T/100Base-TX network  
– Any ISDN (digital) compatible phone or data  
line  
– PBX phone lines  
– Other unknown types of telephone lines  
GB  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Creating Network Settings  
Displaying the Main Menu  
After you have connected an Ethernet cable to  
the built-in PlayStation2, you will need to  
create and save network settings. To do this  
you need a Network Access Disc supplied by  
registering your PlayStation2. You can  
register your PlayStation2. For more  
of the PlayStation2” (page 32).  
From the main menu, you can access  
information and change various settings. You  
can also move to the following screens from  
the main menu. The main menu is displayed  
when you turn on the console without a disc  
inserted.  
Browser screen (page 43)  
System Configuration menu (page 44)  
1
Press PlayStation 2 POWER ON on  
the TV’s remote.  
You will need the following items to create a  
network setting:  
– A Memory Card (8MB) (for  
PlayStation2) (sold separately)  
– Login and network setup information  
provided by your Broadband Internet  
Service Provider  
The main menu is displayed. Note that it  
may take some time for the main menu to  
be displayed.  
z
• Depending on the type of Internet service used,  
you may need to provide your Broadband Internet  
Service Provider with your MAC Address. You  
can find the MAC Address for your  
PlayStation 2 listed in the Version Information  
screen.  
z
• If you press PlayStation 2 POWER ON on the  
TV’s remote with a disc inserted, the main menu  
will not be displayed. To display the main menu,  
press the OPEN button on the console front and  
remove the disc. Then press PlayStation 2  
POWER ON on the TV’s remote.  
Using the Browser Screen  
You can do the following from the Browser  
screen:  
Copy or delete game data saved on a  
Memory Card  
Start a game  
Start playback of an audio CD  
Start playback of a DVD  
Display the main menu.  
Using the directional buttons, select  
1
2
“Browser” and then press  
button.  
The Browser screen is displayed.  
Insert a disc or Memory Card.  
3
The icon for the inserted item is displayed  
on the Browser screen.  
GB  
(Continued)  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3
4
Select an item, and then press  
button.  
The menu option becomes active and can  
be selected.  
Select the desired setting, and then press  
button.  
For details, see the instructions for each  
menu item (pages 44 to 45).  
z
• The default setting for each menu item is  
underlined in the explanations below.  
• Changes to each setting are saved and remain in  
effect even after you turn off or reset the console.  
4
Select an icon, and then press  
button.  
• When you select the Memory Card icon,  
icons for data saved on the Memory  
Card are displayed. To copy or delete  
saved game data, see “To copy or delete  
Clock Adjustment  
You can set the date and time. Use the  
directional buttons to set “Year”, “Month”,  
“Day”, “Hour”, “Minute” and “Second”. The  
setting goes into effect when you press the  
button.  
• If you select the icon for a  
PlayStation2 or PlayStationformat  
software disc, the game will start.  
• When you select the icon for an audio  
CD, the tracks contained on the CD are  
Optional settings  
If you press the  
button at the “Clock  
• If you select the icon for a DVD,  
playback of the DVD will begin.  
Adjustment” screen, you can set options such  
as “Date Format” or “Time Format”. Use the  
z
directional buttons and the  
each setting.  
button to make  
• The message “There is no data” is displayed on  
the Browser screen when no Memory Card or disc  
is inserted in the console.  
Time  
Format  
Sets the system clock to either  
12-hour or 24-hour clock display  
Using the System Configuration  
Menu  
Date Format Sets the display order of year,  
month and day  
From the System Configuration menu, you can  
change settings for numerous options  
including language or time display, and audio  
or video output method.  
Time Zone  
Sets the time zone  
Daylight  
Savings  
Time  
Sets Standard or Daylight  
Savings (Summer Time).  
Normally select “Standard”.  
1
2
Display the main menu.  
Screen Size  
Using the directional buttons, select  
“System Configuration” and then press  
button.  
You can set the display mode for the TV.  
4:3  
The System Configuration menu is  
displayed.  
Full*  
16:9  
* “Full” display mode is compatible with the System  
Configuration menu, Browser screen and audio CD  
screen.  
GB  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Digital Out (Optical)  
You can set whether to output the signal  
through the DIGITAL OUT (OPTICAL)  
connector.  
On  
Select this option when you want  
to output signal through the  
DIGITAL OUT (OPTICAL)  
connector.  
Off  
Select this option when you do  
not want to output signal through  
the DIGITAL OUT (OPTICAL)  
connector.  
Remote Control  
You can set this option when using the DVD  
Remote Control (for PlayStation2) (sold  
separately).  
Gameplay  
Function On  
Select this option when operating  
PlayStation 2 or PlayStation  
format software with the DVD  
Remote Control.  
Gameplay  
Function Off  
Select this option when not  
operating PlayStation 2 or  
PlayStation format software  
with the DVD Remote Control.  
z
• The following limitations apply when the DVD  
Remote Control is set to “Gameplay Function  
On”:  
– Depending on the software, some remote control  
buttons may not work properly.  
– The buttons of the DVD Remote Control will not  
work when two or more buttons are pressed at the  
same time.  
– Some software titles may stop operating properly  
when a controller is removed from controller port 1.  
If this happens, set to “Gameplay Function Off”.  
Language  
You can use this option to select the language  
displayed on the main menu, Browser screen,  
System Configuration menu, and Version  
Information screen.  
English  
French  
Spanish  
German  
Italian  
Displays messages in English  
Displays messages in French  
Displays messages in Spanish  
Displays messages in German  
Displays messages in Italian  
Displays messages in Dutch  
Dutch  
Portuguese Displays messages in Portuguese  
GB  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Menu Functions  
Navigating through TV Home Menu (XMB™)  
The TV Home Menu/XMB™ (XrossMediaBar) provides quick access to programme listings, input  
sources, the settings menu of your TV and more.  
1
Press HOME to display the XMB™.  
Media Category Bar  
Settings  
System Settings  
TV  
Category Object Bar  
2
Press G/g to select a category.  
Media category icon  
Settings  
Description  
Contains all of the necessary configurations to customise your TV  
settings. (page 47).  
Photo  
Music  
You can enjoy photo content via USB devices or the network,  
including Internet content services. (page 24, 30).  
You can enjoy music content via USB devices or the network,  
including Internet content services. (page 24, 30).  
Video  
You can enjoy video content via USB devices or the network,  
including Internet content services. (page 24, 30).  
Digital  
You can select digital channel, and the Digital Electronic Programme  
Guide (EPG) (page 19).  
Analogue  
You can select analogue channel.  
External Inputs  
Network  
You can select equipment connected to the TV.  
You can enjoy “Internet Video” (page 29).  
3
4
5
Press F/f to select an item, then press  
Follow the instructions on the screen.  
Press HOME to exit.  
.
~
• The options you can adjust vary depending on the situation.  
• Unavailable options are greyed out or not displayed.  
• “Photo”, “Music” and “Video” are not supported with the USB connector on the front of PlayStation 2.  
GB  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
TV Settings Menu  
Product Support  
i-Manual  
Displays the on-screen instruction manual.  
z
• Some functions can be started directly from the i-Manual. Press  
to start the  
function when “Use this function” is displayed at the bottom of the screen.  
System Update  
Updates the TV software automatically through your existing antenna (aerial)/  
cable/Internet (when available).  
To always keep the software updated to the newest version, it is recommended to  
have this option set to “On”.  
~
• The software updates when the TV is in standby mode.  
• If performing an update, your TV may take up to several minutes to turn on.  
System Information Displays the manufacturer, brand name, model number, serial number, software  
version, and signal condition. The signal condition is for the currently viewed  
channel.  
As the signal condition changes, the level indicator on the screen rises or falls.  
~
• The signal condition is unavailable for analogue channels and external inputs.  
System Settings  
Scene Select  
Optimises picture and sound quality by selecting the following options.  
~
• When you set “Theatre Mode” to “On”, “Scene Select” is automatically set to  
“Cinema”.  
Cinema  
Sports  
Photo  
Optimises picture scenes and sound just like those in a  
theatre.  
Presents realistic pictures and sound just like those in a  
stadium.  
Reproduces the texture and colour of a printed photo.  
~
• “Photo” is available only when the input signal is 1080i/p.  
Music  
Lets you experience dynamic and clear sound just like at a  
concert.  
Game  
Broadens your game-playing experience with superb picture  
and sound quality.  
Graphics  
Eases prolonged monitor viewing with clearer detailed  
pictures.  
General  
Auto  
Optimised to view general content.  
Automatically optimises picture and sound quality according  
to the input source.  
GB  
(Continued)  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Eco  
Changes the settings related to power consumption.  
Power Saving Reduces power consumption by adjusting the TV backlight.  
When you select “Picture Off”, only sound remains.  
Idle TV Standby Turns the TV off after it has been idle for the preset length of  
time.  
PC Power  
Management  
Turns the TV to standby mode when there is no signal from  
the PC input source for 30 seconds.  
Clock/Timers  
Clock Set  
Set the current time. When the TV has received the clock  
from the broadcast signal, the clock cannot be manually set.  
Time Zone  
Auto DST  
Select the time zone you are in.  
Switches between summer and winter time according to the  
calendar.  
On Timer  
Turns on the TV from standby mode at a time you set, and  
tuned to a channel or input of your preference.  
Sleep Timer  
Turns the TV to standby mode after a preset length of time.  
z
• When you turn off the TV and turn it on again, “Sleep  
Timer” is reset to “Off”.  
General Set-up  
USB Auto Start Select “Slideshow” or “Thumbnail View” to start photo  
playback automatically.  
~
• Be sure to turn on the TV before connecting a USB device  
to the TV.  
• This option is not supported with the USB connector on the  
front of PlayStation 2.  
Home Menu  
Cursor  
Movement  
Select the cursor speed for navigating through menu options  
from “Fast Scroll”, “Slow Scroll” or “No Auto Repeat”.  
Recommendation Searches for and shows programmes you may like under  
“Recommendations” in “Favourites”.  
Quick Start  
Turns the TV on faster than usual by pressing the power  
button on the remote. Up to three time periods can be set.  
When you set “Smart Mode” to “On”, the TV turns on at the  
time of day when you watch TV the most.  
~
• If “Quick Start” is set, power consumption may rise.  
Factory Settings Resets all settings to factory settings. After completing this  
process, the initial set-up screen is displayed.  
Language  
Sets the language displayed on the menu screens.  
Radio Display  
Displays the screen wallpaper for a radio broadcast. You can select a pattern or  
“Photo Slideshow” for a wallpaper.  
Parental Lock  
Sets an age restriction to viewing, or blocks specific channels. To view any rated  
programme you specify or any blocked channel, enter the correct PIN code.  
PIN Code  
Enter your PIN code to activate “Parental Lock”. You can  
also change the PIN code.  
z
• PIN code 9999 is always accepted.  
DivX(R) VOD  
Select “DivX(R) VOD Registration Code” to register your TV for playback of  
DivX contents. Select “DivX(R) VOD Deregistration Code” to delete the  
registration.  
z
• A new registration code will be displayed in “DivX(R) VOD Registration Code”  
after deleting registration via “DivX(R) VOD Deregistration Code”.  
GB  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
Auto Start-up  
You can run the initial Set-up that appeared when you first connected the TV, and  
select the language and country/area, or tune in all available channels again. Even  
if you have made the settings when you first connected the TV, you may need to  
change the settings after moving house, or to search for newly launched channels.  
Display  
Picture  
Target Inputs  
Picture Mode  
Select “Current” to make custom picture settings to the  
current input. Select “Common” to apply common picture  
settings to all input.  
Sets a picture mode. The options that can be selected differ  
depending on the scene select settings.  
Vivid  
Enhances picture contrast and sharpness.  
Standard  
For standard pictures. Recommended for  
basic home use.  
Custom  
Cinema  
Stores your preferred settings.  
For film-based content. Suitable in a  
theatre-like environment.  
Sports  
Optimises picture quality for viewing  
sports.  
Game-Standard For standard picture suitable for games.  
Game-Original Adjusts the game picture according to  
your preference.  
Graphics  
Optimises picture quality for viewing  
graphics.  
Photo-Vivid  
Enhances contrast, sharpness, and colour  
of photographs.  
Photo-Standard For standard viewing of photographs.  
Photo-Original Enhances the visual warmth of  
photographs.  
Photo-Custom Adjusts the detailed settings for viewing  
photographs and stores your preferred  
settings.  
Reset  
Resets all the “Picture” settings to the factory settings  
excluding “Target Inputs”, “Picture Mode” and “Advanced  
Settings”.  
Backlight  
Contrast  
Brightness  
Colour  
Adjusts the brightness of the backlight.  
Increases or decreases picture contrast.  
Brightens or darkens the picture.  
Increases or decreases colour intensity.  
Increases or decreases the green tones and red tones.  
Hue  
~
• “Hue” is available depending on colour system.  
Colour  
Temperature  
Adjusts the whiteness of the picture.  
Cool  
Gives white colours a blue tint.  
Gives white colours a neutral tint.  
Neutral  
Warm 1/Warm 2 Gives white colours a red tint. “Warm 2”  
gives a redder tint than “Warm 1”.  
GB  
(Continued)  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Sharpness  
Sharpens or softens the picture.  
Noise Reduction Reduces the noise level of pictures (snowy pictures).  
~
• “Noise Reduction” is available when “Intelligent Picture” is  
set to “Off”.  
MPEG Noise  
Reduction  
Reduces picture noise in MPEG-compressed videos.  
Film Mode  
Provides improved picture movement when playing DVD or  
VCR images taken on film, reducing picture blur and  
graininess.  
Auto  
Provides the original film-based content  
as is.  
Off  
~
• If the image contains irregular signals or too much noise,  
“Film Mode” is automatically turned off even if “Auto” is  
selected.  
Advanced  
Settings  
Allows you to set “Picture” settings in more detail. These  
settings are not available when “Picture Mode” is set to  
“Vivid” (or “Photo-Vivid”).  
Reset  
Resets all the advanced settings to the  
factory settings.  
Black Corrector Enhances black areas of the picture for  
stronger contrast.  
Adv. Contrast Adjusts “Backlight” and “Contrast” by  
Enhancer  
judging the brightness of the screen. This  
setting is effective for dark images and  
scenes.  
Gamma  
Adjusts the balance between bright and  
dark areas of the picture.  
Auto Light  
Limiter  
Reduces glare such as in scenes where the  
entire screen is white.  
Clear White  
Live Colour  
Emphasises white colours.  
Makes colours more vivid.  
White Balance Adjusts the temperature of each colour.  
Ambient Sensor  
Automatically optimises the picture settings according to the ambient light in the  
room. The sensor detects ambient light levels to adjust the brightness and colour  
temperature of the picture. With this feature you can have the best picture quality  
under your room’s lighting conditions.  
GB  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Screen  
(for input other than a  
PC)  
Target Inputs  
Select “Current” to make custom picture settings to the  
current input. Select “Common” to apply common picture  
settings to all input.  
Auto Format  
Automatically changes “Screen Format” to match the input  
signal. If you want to use the setting that you specified in  
“Screen Format”, select “Off”.  
4:3 Default  
Sets the default screen format for 4:3 broadcasts.  
Smart  
Displays conventional 4:3 broadcasts  
with an imitation wide screen effect.  
4:3  
Displays conventional 4:3 broadcasts in  
the correct proportion.  
Off  
Uses the setting that you specified in  
“Screen Format”.  
Auto Display  
Area  
Automatically adjusts the picture to the most appropriate  
display area.  
Display Area  
Adjusts the picture display area.  
+1  
Displays pictures in their original size.  
Normal  
Displays pictures in their recommended  
size.  
-1  
Enlarges the picture so that the edges are  
outside the visible display area.  
Screen Position Adjusts the vertical position and horizontal position of the  
picture.  
Vertical Size  
Adjusts the vertical size of the picture.  
(for PC input)  
Auto Adjustment Automatically adjusts the display position, and phase of the  
picture in PC mode.  
z
• “Auto Adjustment” may not work well with certain input  
signals. In such cases, manually adjust “Phase”, “Pitch”,  
“Horizontal Shift”, and “Vertical Shift”.  
Reset  
Phase  
Pitch  
Resets all PC screen settings to factory settings.  
Adjusts the phase when the screen flickers.  
Adjusts the pitch when the picture has unwanted vertical  
stripes.  
Horizontal Shift Adjusts the horizontal position of the picture.  
Vertical Shift Adjusts the vertical position of the picture.  
Screen Format Sets “Screen Format” for displaying pictures from your PC.  
Normal  
Full 1  
Displays the picture in its original size.  
Enlarges the picture to fill the display  
area, while maintaining its original  
proportion.  
Full 2  
Enlarges the picture to fill the display  
area.  
Video Input Settings Colour System Select the colour system according to the input signal from  
the input source.  
GB  
(Continued)  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Sound  
Sound  
Target Inputs  
Sound Mode  
Select “Current” to make custom picture settings to the  
current input. Select “Common” to apply common picture  
settings to all input.  
Sets a sound mode. “Sound Mode” includes options best  
suited for video and photographs, respectively. The options  
that can be selected differ depending on the scene select  
settings.  
Dynamic  
Enhances the treble and bass sound to  
make sound clear.  
Standard  
Provides natural sound.  
Clear Voice  
Makes voice clearer by lowering  
background sound.  
Reset  
Resets all the “Sound” settings to the factory settings  
excluding “Target Inputs”, and “Sound Mode”.  
Treble  
Adjusts higher-pitched sounds.  
Bass  
Adjusts lower-pitched sounds.  
Balance  
Surround  
Emphasises sound from the left or right speaker.  
Allows you to select the suitable surround effects depending  
on the genre of TV programme (movie, sport, music, etc.) or  
video game.  
The options that can be selected differ depending on the  
“Scene Select” settings.  
S-FORCE Front Virtually reproduces realistic sound.  
Surround  
Sports  
Delivers surround effects that make you  
feel like you are watching a live sports  
event.  
Music  
Delivers surround effects that make you  
feel like you are in a music hall.  
Cinema  
Delivers surround effects just like the  
high-grade audio systems found in movie  
theatres.  
Game  
Off  
For virtual game world experience.  
Turns off “Surround”.  
~
• Before selecting “Surround”, be sure to set options in  
“Scene Select” according to your target programme type to  
obtain surround effects.  
Sound Enhancer Reproduces clear sound by complementing high-frequency  
sounds.  
Auto Volume  
Keeps volume level constant across all programmes and  
adverts (e.g. adverts tend to be louder than programmes).  
Volume Offset  
Adjusts the volume level of the current input relative to other  
inputs, when “Target Inputs” is set to “Current”.  
GB  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Dual Sound  
Sets the sound from the speaker for a stereo or bilingual broadcast.  
Stereo/Mono  
A/B/Mono  
For stereo broadcasts.  
For bilingual broadcasts, select “A” for sound channel 1, “B”  
for sound channel 2, or “Mono” for mono channel, if  
available.  
~
• For other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A”, or  
“B”.  
Speakers  
TV Speakers  
Turns on and outputs the TV’s sound from the TV speakers.  
Audio System  
Turns off the TV speakers and outputs the TV’s sound from  
external audio equipment connected to the audio output jacks  
(sockets) on the TV.  
~
• To use multi-channel audio, select external audio system and connect optical out  
for equipment compatible with Dolby Digital.  
• “Audio System” must be selected to listen to 5.1 multi-channel audio.  
Headphone Settings Headphone  
Speaker Link  
Switches the TV’s internal speakers on/off when you connect  
headphones to the TV.  
Audio Out  
Fixed  
The audio output of the TV is fixed. Use your audio  
receiver’s volume control to adjust the volume (and other  
audio settings) through your audio system.  
Variable  
When using an external audio system, volume output from  
audio out can be controlled using the TV’s remote.  
Key Tone  
Select “On” to play sounds as you navigate with the remote.  
z
• When you select “Off”, the TV start-up sound is also turned off.  
Optical Out  
For audio signals from the DIGITAL AUDIO OUT (OPTICAL). Select “Auto” for  
equipment compatible with Dolby Digital, or “PCM” for equipment not  
compatible with Dolby Digital.  
Analogue Set-up  
Programme List  
Display  
Select “Off” to hide the list of analogue channels from the XMB (XrossMediaBar).  
1 Digit Direct  
Select “On” for changing analogue channels with one preset number button (0 – 9)  
on the remote.  
~
You cannot select channel numbers 10 and above by entering two digits on the  
remote.  
Auto Tuning  
Automatically tunes in all available analogue channels, and stores their settings in  
the TV. You can run “Auto Tuning” after moving to a new residence, changing  
service providers, or to search for newly launched channels.  
Programme Sorting Changes the order of analogue channels stored in the TV.  
GB  
(Continued)  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Programme Labels  
Assigns a channel name of your choice.  
1
2
Press F/f to select the channel you want to name, then press  
Press F/f to select the desired letter or number (“_” for a blank space), then  
press g.  
.
If you enter a wrong character  
Press G/g to select the wrong character. Then, press F/f to select the correct  
character.  
3
4
Repeat step 2 until you finish entering the name.  
Press to exit the labeling procedure.  
Intelligent Picture  
On with Indicator Automatically reduces the picture noise. The signal level bar  
is displayed when the channel is changed or the display is  
changed from an input screen to a TV programme.  
On  
Off  
Automatically reduces the picture noise.  
Turns off the “Intelligent Picture” feature.  
Manual Programme To preset a channel, press PROG +/– to select the channel number.  
Preset  
~
You cannot select a channel number that is set to “Skip” (page 54).  
Programme  
System  
Channel  
AFT  
Select a channel number to tune manually.  
Select a TV broadcast system.  
Select “S” for cable channels or “C” for terrestrial channels.  
Allows you to fine-tune the selected channel manually if you  
feel that a slight tuning adjustment may improve picture  
quality.  
When “On” is selected, fine tuning adjustments are made  
automatically.  
Audio Filter  
Improves the sound of individual channels when distortion  
occurs in mono broadcasts.  
~
You cannot receive stereo or dual sound when “Low” or  
“High” is selected.  
Skip  
Skips unused analogue channels when you press PROG +/–  
to select channels. To select channels you have programmed  
to skip, use the corresponding number buttons.  
Signal Level  
Displays the signal level for current programme.  
Digital Set-up  
Subtitle Set-up  
Subtitle Setting Displays visual aids for the hearing impaired with subtitles (if  
available) by setting to “For Hard Of Hearing”.  
Primary  
Select the most preferred subtitle language.  
Preferred  
Language  
Secondary  
Preferred  
Language  
Select the secondary preferred subtitle language.  
Audio Set-up  
Audio Type  
Switches to broadcast for the hearing impaired when you  
select “For Hard Of Hearing”.  
GB  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Primary  
Preferred  
Language  
Select the most preferred language. Some digital channels  
may broadcast several audio languages for a programme.  
Secondary  
Preferred  
Language  
Select the secondary preferred language.  
Audio  
Description  
Provides audio description (narration) of visual information,  
when such information is available.  
Mixing Level  
Adjusts the TV main audio and “Audio Description” output  
levels.  
Dynamic Range Compensates for differences in the audio level between  
different channels (only for Dolby Digital audio).  
~
• The effect may not function or may vary depending on the  
programme regardless of the “Dynamic Range” setting.  
MPEG Audio  
Level  
Adjusts the MPEG audio sound level.  
Digital Auto Tuning  
Auto Tuning Range  
Automatically tunes in all available digital channels and stores their settings in the  
TV. You can run “Digital Auto Tuning” after moving to a new residence, changing  
service providers, or to search for newly launched channels.  
Select the tuning range to search for available channels.  
Normal  
Full  
Searches within your region/country.  
Searches regardless of region/country.  
Digital Programme  
Sorting  
Removes unwanted channels, or changes the order of digital channels stored in the  
TV.  
Digital Manual Tuning Tunes digital channels manually when “Digital Auto Tuning” is set to “Antenna”.  
Digital Auto Service Detects and stores new digital services as they become available.  
Update  
Service Replacement Automatically changes the channel when a broadcaster changes transmission of the  
viewing programme to a different channel.  
CA Module Set-up  
Provides access to a pay TV service after you obtain a Conditional Access Module  
(CAM) and a view card. See the location of the  
22).  
(PCMCIA) jack (socket) (page  
External Inputs  
AV Preset  
Assigns an icon or name to external equipment. Select “Auto” to display icons or  
names only when the equipment is connected, or “Always” to display regardless of  
connection status.  
~
• For a SCART connection and PlayStation 2 mode, skip cannot be set.  
• For a PC connection, icon and label cannot be set.  
GB  
(Continued)  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
HDMI Set-up  
Communicates with equipment compatible with the “Control for HDMI” function.  
~
• “Control for HDMI” settings must be made on the connected equipment.  
Control for HDMI Links the operations of the TV and the connected equipment.  
For specific Sony equipment compatible with “Control for  
HDMI”, this setting is applied automatically to the connected  
equipment when “On” is set.  
Auto Devices Off Turns off the connected equipment when you turn off the TV.  
Auto TV On  
Turns on the TV when you turn on or perform playback, etc.,  
on the connected equipment.  
HDMI Device List Displays a list of connected equipment that is compatible  
with Control for HDMI.  
Device Control Select button functions of the TV’s remote to operate the  
Keys  
connected equipment.  
Normal  
For basic operations, such as navigation  
buttons (up, down, left or right, etc).  
Tuning Keys  
For basic operations and operation of  
channel-related buttons, such as PROG +/  
– or 0 - 9, etc.Useful when you control a  
tuner or set-top box, etc; via the remote.  
Menu Keys  
For basic operations and operation of the  
HOME/OPTIONS buttons. Useful when  
you select menus of a BD player, etc; via  
the remote.  
Tuning and  
Menu Keys  
For basic operations and operation of  
channel-related buttons and HOME/  
OPTIONS buttons.  
~
You cannot use “Control for HDMI” if the TV operations are linked to the  
operations of an audio system that is compatible with Control for HDMI.  
Network  
~
• For PlayStation 2, other settings are necessary.  
Network Set-up  
Select “Custom” after selecting “Wired Set-up”.  
IP Address  
Setting  
Select “Manual” to set the IP address manually, or “Auto” to  
set it automatically.  
IP Address/  
Configure each option when “Manual” is selected in “IP  
Address Setting”.  
Subnet Mask/  
Default Gateway/  
Primary DNS/  
Secondary DNS  
MAC Address  
Displays the MAC address, which is a fixed, globally unique  
identifier of the network device.  
Proxy Server  
Configure the proxy server name and port number if you use  
a proxy server.  
Network (SSID) Select SSID (network name) of the target router.  
Security Select an appropriate security key.  
GB  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Refresh Internet  
Content  
For reconnection to the Internet to receive available Internet content services.  
Server Display  
Settings  
Displays the connected server list. You can select the server to display in the Home  
Menu.  
Server Diagnostics  
Renderer  
Diagnoses whether the TV can connect to each server on the home network.  
Renderer  
Function  
Enables the TV to playback photo/music/video files located  
on other control devices, such as a digital still camera or  
mobile phone, using those control devices via the network.  
RendererAccess Select “On” to allow access from a specified control device.  
Control  
Renderer Set-up “Automatic Access Permission” permits access to the TV  
automatically when a control device accesses the TV for the  
first time. When “Smart Select” is set to “On”, the TV can  
respond to infrared signals sent from control devices. You can  
set the name of the TV shown on the control device in  
“Renderer Name”.  
GB  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Additional Information  
Specifications  
System  
LCD (Liquid Crystal Display) Panel  
Panel system  
TV system  
Analogue: Depending on your country/area selection: B/G/H, D/K, L, I  
Digital: DVB-T/DVB-C  
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58 (only video input), NTSC4.43 (only  
video input)  
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4  
Colour/video system  
Channel coverage  
Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41  
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69  
Digital: VHF/UHF  
5 W + 5 W  
Sound output  
Input/Output jacks  
Antenna (aerial) cable  
75 ohm external terminal for VHF/UHF  
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video  
output.  
/
AV1  
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i  
Audio input (phono jacks)  
COMPONENT IN  
COMPONENT IN  
HDMI IN1, 2, 3, 4  
Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i  
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital  
Analogue audio input (minijack) (HDMI IN 4 only)  
PC Input (page 60)  
Video input (phono jack)  
AV2  
AV2  
Audio input (phono jacks)  
Digital optical jack (Two channel linear PCM, Dolby Digital)  
DIGITAL AUDIO  
OUT (OPTICAL)  
Audio output (phono jacks)  
(VAR/FIX)  
PC IN  
PC Input (Mini D-sub 15-pin) (page 60)  
PC audio input (minijack)  
USB port  
Headphones jack  
i
CAM (Conditional Access Module) slot  
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection  
speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not  
guaranteed for this TV.)  
LAN  
* For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).  
GB  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Model name KDL-  
Power and others  
Power requirements  
22PX300  
220 V – 240 V AC, 50 Hz  
Approx. 54.8 cm/22 inches  
Screen size (measured  
diagonally)  
1,366 dots (horizontal) × 768 lines (vertical)  
39.0 W  
Display resolution  
Power  
in “Home”/  
consumption “Standard”  
mode  
90.0 W  
in “Shop”/  
“Vivid” mode  
0.9 W (13 W when “Quick Start” is set to “On”)  
57 kWh  
Standby power  
consumption*  
1
Average annual energy  
2
consumption*  
Type: Semiconductor, continuous  
DVD Wavelength: 645 - 660 nm  
Power: Max 6 mW  
Laser  
CD Wavelength: 770 - 800 nm  
Power: Max 7 mW  
Dimensions (Approx.) (w × h × d)  
57.5 × 42.9 × 25.3 cm  
with Table-Top Stand  
Mass (Approx.)  
with Table-Top Stand  
Supplied accessories  
Operating temperature  
1
9.8 kg  
5 °C to 35 °C  
* Specified standby power is reached after the TV finishes necessary internal processes.  
* 4 hours a days and 365 days a year  
2
~
• To save power consumption  
– when you reduce backlight setting (the brightness of the screen), the power consumption reduce.  
– the “Eco” settings (e.g. “Power Saving”, “Idle TV Standby”) help you to reduce the power consumption and thus save  
money by reducing electricity bills.  
Design and specifications are subject to change without notice.  
GB  
(Continued)  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC input signal reference chart for  
PC and HDMI IN 1, 2, 3, 4  
Resolution  
Horizontal  
frequency (kHz) frequency (Hz)  
Vertical  
Standard  
VGA  
Signals  
Horizontal  
(Pixel)  
640  
×
Vertical  
(Line)  
VGA  
×
×
×
×
×
×
480  
31.5  
37.9  
48.4  
47.4  
47.8  
47.7  
60  
60  
60  
60  
60  
60  
SVGA  
XGA  
800  
600  
768  
768  
768  
768  
VESA Guidelines  
VESA Guidelines  
VESA  
1024  
1280  
1280  
1360  
WXGA  
VESA  
VESA  
* 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This  
will affect the “Video Input Settings” and “Screen” settings. To view PC contents, set “Screen Format” to  
“Wide”.  
~
• This TV’s PC input does not support Sync on Green or Composite Sync.  
• This TV’s PC input does not support interlaced signals.  
GB  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Optional accessories  
When purchasing optional accessories, be sure to purchase those that are compatible with this  
model of the PlayStation2 console.  
About the DVD remote control (for PlayStation 2)  
When purchasing a new DVD remote control, choose model number SCPH-10420 E which does  
not include the IR receiver unit (for PlayStation2).  
Accessories not compatible with this model  
The following accessories for the PlayStationconsole and the PlayStation2 console are not  
compatible with this model of the PlayStation2 console.  
Product name  
Network Adaptor (Ethernet) (for PlayStation 2)  
Multitap  
Vertical stand (for PlayStation 2)  
Horizontal stand (for PlayStation 2)  
Products that use the  
Component AV Cable  
S400 i.LINK connector  
Component AV Cable (for PlayStation 2)  
Euro-AV Cable  
RFU Adaptor  
GB  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check whether the 1 (standby) indicator is flashing in red.  
When the 1 (standby) indicator is flashing  
The self-diagnosis function is activated.  
1
Count how many times the 1 (standby) indicator flashes between each three second break.  
For example, the indicator may flash three times, go off for three seconds, then flash again  
three times.  
2
Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your  
dealer or Sony service centre of how the indicator flashes (number of flashes).  
When the 1 (standby) indicator is not flashing  
1
2
Check the items in the tables below.  
If the problem persists, have your TV serviced by qualified service personnel.  
Condition  
Explanation/Solution  
Picture  
No information from  
• Press  
to display the list of inputs, then select the desired input.  
connected equipment.  
• Check the connection between the equipment and the TV.  
Ghosting or double images  
appear.  
• Check the antenna (aerial)/cable connection.  
• Check the antenna (aerial) location and direction.  
Only noise appears on the  
screen.  
• Check if the antenna (aerial) is broken or bent.  
• Check if the antenna (aerial) has reached the end of its serviceable life  
(three to five years for normal use, one to two years at the seaside  
location).  
There is picture or sound noise • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture  
when viewing a TV  
programme.  
reception (page 54).  
Tiny black points and/or  
bright points appear on the  
screen.  
• The screen is composed of pixels. Tiny black points and/or bright points  
(pixels) on the screen do not indicate a malfunction.  
The pictures are distorted.  
No picture colour.  
• Change the current setting of “Film Mode” to other settings (page 50).  
• Select “Reset” in “Picture” (page 49).  
No picture colour from  
equipment connected to the  
COMPONENT IN jacks  
(sockets).  
• Check the connection of the  
check if connectors are fully plugged in.  
COMPONENT IN jacks (sockets) and  
No picture from the connected • Turn the connected equipment on.  
equipment. • Check the cable connection.  
• Press  
to display the list of inputs, then select the desired input.  
• Correctly insert the memory card or other storage device, such as digital  
still camera.  
• Make sure that the memory card (in equipment such as a digital still  
camera) has been properly formatted.  
• Operation is not guaranteed for all USB devices. Also, operations differ  
depending on the features of the USB device or the video files being  
played.  
You cannot select connected • Check the cable connection.  
equipment in the Home Menu. • Set the servers to be displayed in the Home Menu (page 31).  
GB  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Condition  
Explanation/Solution  
The size of the video image  
from the built-in  
• Check the screen format settings on the TV.  
• Adjust the image size of the DVD to match the TV screen. Start a DVD,  
PlayStation 2 does not match stop playback, and then select “Setup”, and select “TV Type” in “Screen  
the TV screen.  
Setup” in the control panel of the PlayStation 2.  
• With some DVDs, image size cannot be changed.  
Sound  
There is no sound.  
• Press 2 +/– or % (Muting).  
• Check if the “Speakers” is set to “TV Speakers” (page 53).  
• When using HDMI input with Super Audio CD or DVD-Audio,  
DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.  
• When you select an analogue (RF) channel and pictures are displayed  
correctly, refer to “System” in “Manual Programme Preset” (page 54)  
and change the TV broadcast system.  
There is no sound. (For the  
• Press 2 +/– or % (Muting).  
built-in PlayStation 2.)  
• If the PlayStation 2 is connected to an audio device, check the settings  
on the connected device. For details, refer to the instruction manual  
supplied with the device.  
• When playing PlayStation 2 format software titles that do not support  
audio output from the DIGITAL OUT (OPTICAL) connector, no sound  
will be produced even if you connect using an optical digital cable for  
audio.  
There is no sound or the sound • If the PlayStation 2 is connected to a digital audio device, check if the  
quality from the digital audio  
“Digital Out (Optical)” in the System Configuration menu is set to “On”.  
device is poor. (For the built-in • When playing DTS audio, set “DTS” to “On” in the control panel of the  
PlayStation 2.)  
PlayStation 2 (select “Setup”, and then select “Audio Digital Out” in  
“Audio Setup”). If the connected device does not have a built-in DTS  
decoder, DTS audio cannot be played.  
The surround effect is not  
produced when playing a  
DVD with a Dolby Digital  
audio track. (For the built-in  
• Check that the PlayStation 2 is connected to an audio device with a  
built-in Dolby Digital decoder using an optical digital cable.  
• To play Dolby Digital audio, set “Dolby Digital” to “On” in the control  
panel of the PlayStation 2 (select “Setup”, and then select “Audio  
PlayStation 2.)  
Digital Out” in “Audio Setup”).  
The audio output from a DVD • Select “Off” in “Digital Out (Optical)” (page 45), and change the output  
is low.  
volume from the DVD to “+1” or “+2”. For details, see the User’s Guide  
on the Internet (page 32).  
Channels  
You cannot select the desired • Switch between digital and analogue mode, and select the desired  
channel.  
channel.  
Some channels are blank.  
• The channel is for scrambled/subscription service only. Subscribe to a  
pay TV service.  
• The channel is used only for data (no picture or sound).  
• Contact the broadcaster for transmission details.  
You cannot view digital  
channels.  
• Ask a local installer if digital transmissions are provided in your area.  
• Upgrade to a higher gain antenna (aerial).  
Network Connection  
Connection fails.  
Check Connections  
• By verifying that you are using a straight cable for the LAN cable.  
• By examining if the cable is connected firmly.  
• By examining the connection between the TV and router.  
Check Settings  
• By changing the IP Address for the DNS server (page 30).  
• By contacting your Internet service provider.  
• By specifying the IP Address of the router if you do not know the DNS  
of your Internet service provider.  
GB  
(Continued)  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Explanation/Solution  
No server is found, no list is • Once server settings are changed, turn the TV off and on by pressing 1  
retrieved, and playback fails.  
on the TV.  
• Run “Server Diagnostics” (page 31).  
When using a PC as the server  
• Check if the PC is turned on. Do not turn off the PC while accessing it.  
• If the PC has security software installed, allow connections from  
external devices. For details, refer to the manual supplied with your  
security software.  
• Stop the server application and restart it if the server is experiencing  
instability. If the server remains instable, restart the PC.  
• Reduce the number of applications running on the PC; the server may be  
overloaded.  
• Reduce the amount of content; the server may be overloaded.  
Changes on the server are not • Sometimes changes are not applied to the TV display even though  
made correctly.  
content has been added and/or deleted on the server. Go back up one  
level and try opening the folder or server again.  
No photo, music, or video files  
are displayed.  
Preliminary Check  
• Check that the connected device supports DLNA.  
• Operations are not guaranteed for all servers. Also, operations differ  
depending on the features of the server and the content in question.  
• Turn the connected device on.  
Check connections by examining that the LAN cable or AC  
power cord (mains lead) of the server has been connected  
properly.  
Check Settings  
• By examining that the connected device is registered under “Server  
Display Settings” (page 31).  
• By checking if that the server is correctly configured.  
• By examining that the selected device is connected to the network and  
can be accessed.  
• If “IP Address Settings” in “Network Set-up” (page 56) is set to “Auto”,  
it may take some time to recognise devices if there is no DHCP server.  
• When playing content from your PC, adjust its firewall settings.  
The TV cannot be found from • Check connections by examining that the LAN cable or AC power cord  
a renderer-compatible device. (mains lead) of the device has been connected properly.  
• Check connections or settings of the wireless LAN (page 28).  
Check Settings  
• By confirming that the “Renderer Function” is activated (page 57).  
• By confirming that the connected device is registered under “Renderer  
Access Control” (page 57).  
Wireless LAN connection  
fails or radio reception  
conditions are bad.  
• Check the installation location for the TV and wireless LAN router.  
Signal condition may be affected for the following reasons.  
Other wireless devices, microwaves, fluorescent lights, etc., are placed  
nearby.  
There are floors or walls between the wireless LAN router and TV.  
• When using a USB Wireless LAN Adapter, move it to avoid signal  
interference by using an extension cable with base unit (optional  
accessory).  
A connection to the network • Check that the network settings are correct (page 42). Refer to the  
of the built-in PlayStation 2  
cannot be established.  
information from your broadband Internet service provider and the  
instructions supplied with the software in use, and adjust the settings  
accordingly.  
• Check that the Ethernet cable is properly connected (page 42).  
• Check that you are using the correct type of Ethernet cable (cross or  
straight cable). For details, refer to the instruction manual supplied with  
the network device.  
• Check that the network device is properly connected. Also check that the  
settings of the network device in use are correct. For details, refer to the  
instruction manual supplied with the network device.  
GB  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Explanation/Solution  
Only a few icons appear under • This is normal when internet connection is not available.  
the “Network” in the Home  
Menu.  
Analog Controller (DUALSHOCK®2)  
The controller does not  
function correctly.  
• If a software title is compatible only with the Analog Controller  
(DUALSHOCK®2), it will not work properly with the Analog  
Controller (DUALSHOCK®). Use a controller that is appropriate for the  
software title. For details, refer to the instruction manual supplied with  
the software.  
• Some software specifies a specific controller port that must be used.  
Check that the controller is connected to the correct port. For details,  
refer to the instruction manual supplied with the software.  
• There may be a problem with the controller in use. Try using another  
controller that is compatible with the built-in PlayStation 2.  
The left and right analog  
• When these symptoms occur, rotate the left and right analog sticks of the  
sticks of the controller do not Analog Controller (DUALSHOCK®2) in a large circle to adjust the  
operate properly.  
sticks to an optimal range of operation. Be sure to rotate in a circle; do  
not twist the sticks.  
Operation (PlayStation2)  
Check the following items  
first;  
• Check that the PlayStation 2 is turned on. Press PlayStation 2  
POWER ON on the remote to turn on the PlayStation 2 (the "/1  
indicator on the front of the PlayStation 2 will turn green).  
• Check that the AC power cord (mains lead) of the TV is fully inserted  
into the electrical outlet (page 6).  
• Check that the cables are correctly and securely connected.  
A disc cannot be played.  
• Check that the disc is of a type that can be played on the PlayStation  
2
• Check that the disc is clean and in good condition. If the disc is dirty,  
wipe it gently with a soft cloth.  
• Some PlayStation format software may not perform properly. For  
more information, refer to the URL in the Operating Instructions (paper  
manual).  
• If the disc has a label, place the disc in the PlayStation 2 with the label  
side facing up (page 35).  
• If a DVD-R or DVD-RW disc is not finalised, it cannot be played.  
• Copy-protected video from a digital broadcast recorded on Content  
Protection for Recordable Media (CPRM) compatible DVD-RW discs or  
on CPRM compatible DVD-R discs cannot be played.  
• Check that the region code of the DVD is correct for the PlayStation 2  
in use (page 40). Also check that the broadcast standard is correct.  
• The parental control feature may be set on the disc. Follow the on-screen  
instructions and temporarily raise the parental control restriction level.  
The PlayStation 2 does not • Check that the memory card is compatible with the software in use  
recognise the memory card.  
(page 36). To save or load PlayStation 2 format software, use a memory  
Data cannot be saved or  
copied to the memory card.  
card (8MB) (for PlayStation 2) (SCPH-10020 E). To save or load  
PlayStation format software, use a memory card (SCPH-1020 E).  
You cannot copy saved data from PlayStation 2 format software to a  
memory card (SCPH-1020 E).  
• Check that the memory card is securely inserted into the memory card  
slot on the front of the PlayStation 2 (page 36).  
• There may be a problem with the memory card in use. If you have  
another memory card that is compatible with the PlayStation 2, try  
switching memory cards.  
GB  
(Continued)  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Explanation/Solution  
Data saved on a memory card • While saving, loading, copying or deleting data, do not attempt any of  
is corrupted.  
the following. Doing so may cause the data to become corrupted.  
Do not remove the memory card or the controller.  
Do not open the disc cover.  
Do not reset the PlayStation 2.  
Do not turn off the PlayStation 2.  
The PlayStation 2 does not • Static electricity and other similar occurrences may affect the  
function properly.  
PlayStation 2 operation. Turn off the PlayStation 2 and the TV, and  
unplug the TV from the electrical outlet. Then plug in and turn it on.  
The "/1 indicator flashes in • Do not use the PlayStation 2 until the flashing stops (page 32). Placing  
red and the PlayStation 2  
the TV in an extremely hot location or blocking vents of the  
does not work.  
PlayStation 2 raises the internal temperature of it, thereby interrupting  
proper operation.  
You forgot your password.  
You can clear the password using the following procedure:  
1: Insert a DVD without the parental control feature.  
2: In the control panel of the PlayStation 2, select x (Stop) to stop  
playback, and then select x (Stop) again to clear resume play.  
3: Select “Setup”, and then select “Parental Control” in “Custom Setup”,  
and then press the  
button on the controller.  
4: Press the SELECT button on the controller, and then enter the  
number “7444” on the screen that is displayed. The registered  
password is cleared, and the screen for registering a new password is  
displayed. Enter a new password.  
The DVD does not function. • The playback status or settings of some DVDs are preset intentionally by  
Some DVD settings cannot be the manufacturer. Because the PlayStation 2 plays DVDs according to  
changed.  
the settings on the disc, some functions may not be available even if you  
follow the procedures in this manual.  
• Some settings cannot be changed during playback or resume play. In the  
control panel of the PlayStation 2, select x (Stop) to stop playback,  
and then select x (Stop) again to clear resume play.  
General  
Poor picture on BRAVIA  
Internet Video.  
• The quality of the video displayed on your TV depends on the quality of  
the video provided by the video content provider as well as your  
connected bandwidth.  
Small picture on BRAVIA  
Internet Video.  
• Press F/f to zoom in and out.  
Certain Internet video  
• Video quality and picture size vary and are dependent upon broadband  
speed and delivery by content providers.  
programmes display a loss of  
detail, especially during fast-  
motion or dark scenes.  
Good picture quality but no  
sound on the Internet video  
content.  
• Quality depends on content provided by the video content provider as  
well as your connected bandwidth.  
• Due to the nature of Internet video, not all videos will contain sound.  
You do not see many videos in • Press OPTIONS and select categories to view more content.  
the Internet Video Guide.  
Distorted picture and/or  
sound.  
• Keep the TV away from electrical noise sources such as cars, hair-dryers  
or optional equipment.  
• When installing optional equipment, leave some space between the  
equipment and the TV.  
• Check the antenna (aerial)/cable connection.  
• Keep the antenna (aerial)/cable TV cable away from other connecting  
cables.  
The TV turns off  
automatically.  
• Check if the “Sleep Timer” is activated, or confirm the “Duration”  
setting of “On Timer” (page 48).  
• Check if the “Idle TV Standby” in “Eco” is activated (page 48).  
GB  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Explanation/Solution  
The TV turns on  
automatically.  
• Check if the “On Timer” is activated (page 48).  
Some input sources cannot be • Select “AV Preset” and confirm the “Always” setting for the input  
selected. sources (page 55).  
The remote does not function. • Replace the batteries.  
Your TV may be in SYNC mode.  
Press SYNC MENU, select “TV Control” and then select “Home  
(Menu)” or “Options” to control the TV.  
• Check the function buttons on the remote (page 13). If PS2 is selected  
in TV mode or TV is selected in PS2 mode, the remote will not function.  
HDMI equipment does not  
appear on “HDMI Device  
Selection”.  
• Check that your equipment is compatible with Control for HDMI the  
value of “Control for HDMI” is “On”.  
You cannot select “Off” in  
“Control for HDMI”.  
You cannot select “Off” for any audio system compatible with “Control  
for HDMI”. If you want to change the audio output to the TV speaker,  
select “TV Speakers” in the “Speakers” menu (page 53).  
The “Parental Lock” password • Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)  
of the TV setting menu has  
been forgotten.  
Not all channels are tuned for • Check the support website for cable provide information.  
cable.  
The TV surrounds become  
warm.  
• When the TV is used for an extended period, the TV surrounds become  
warm.  
You may feel hot when touching there by the hand.  
GB  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Numerics  
A-G  
R-Z  
Channels  
Connecting  
Reset  
Settings  
EPG (Digital Electronic Programme  
H-Q  
Headphones  
GB  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For useful information about Sony products  
4-256-733-F2(1)  
© 2010 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shark Iron GI465D User Manual
Sharp Air Conditioner AF S60FX User Manual
Shure Stereo Amplifier SR105 User Manual
Snapper Lawn Aerator 4545 User Manual
Snapper Lawn Aerator 4577 User Manual
Sony Car Stereo System CDX M620 User Manual
Sony Car Stereo System Cpa 9c User Manual
Sony Projector Accessories PSS 800 User Manual
Soundstream Technologies Car Amplifier RUB11000D User Manual
Spalding Fitness Equipment M8809C4 User Manual