Stanton CD Player CM205 User Manual

CM.205  
DUAL TABLETOP CD PLAYER WITH MIXER  
USER MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
The CM.205 is the perfect CD mixer for the DJ looking for simplicity backed by professional quality. This versatile unit features dual top loading CD play-  
ers and built-in line inputs for your iPod® and other portable media devices so you can easily access a variety of music sources! The CM.205 makes it  
easy to please the crowd in virtually any venue, from clubs, bars and restaurants to dance studios and mobile gigs.  
FEATURES  
CD Section:  
MP3 playback  
20-sec. anti-shock buffer per side prevents CD "skips"  
Up to 8% pitch control with pitch bend  
Fader start  
Relay play  
Mixer Section  
2 line inputs to connect iPod®, other MP3 device or more CD players  
Gain and 3 band EQ (+9/-26) per channel  
User replaceable cross fader  
1/4" mic input with volume control  
Headphone output with cue pan  
SETUP  
Checking the Contents of Package  
Check that the carton contains the following items:  
(1) CM.205 CD Mixer  
(2) Two (2) rack ears  
(3) Eight (8) screws  
(4) AC Power Cord  
(5) Owner’s Manual (this book)  
(6) RCA to mini-jack cable for iPod®, computers or other MP3 players or CD players  
(7) Stanton product guide  
***iPod® is a registered trademark for Apple Computer, Inc.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLING THE RACK EARS  
• Installing the Rack Ears  
:: STEP 1 ::  
Place the unit upside down over a pad, pillow, or towel to avoid damaging the control surface.  
:: STEP 2 ::  
Align the left rack ear with the screw holes as shown. Use 4 screws to lock the ear in place.  
:: STEP 3 ::  
Repeat step 2 with the right rack ear. You can now turn the unit over.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK SETUP DIAGRAM  
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your  
microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers. Additionally, you can connect  
the REC output to any recording device such as a CD or DVD recorder. Plug your mixer into AC power. Now you are ready to switch everything on.  
IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning  
off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD PLAYER FUNCTIONS  
12  
11  
1
2
3
4
10  
5
6
7
8
9
7. CUE – Used to recall and preview cue points. A new cue point is set  
1. EJECT – Opens the CD door.  
every time playback is resumed.  
2. FADER START You can use the crossfader to start and stop the CD  
decks. The fader start switch activates the fader start feature. When in  
the ON position, sliding the crossfader to either end will start the CD  
on that side and pause the CD on the other side and return to the cue  
point. Fader Start always starts from the cue point.  
8. SEARCH – Scans forward or back through the current track. This unit  
features four scan speeds. Keep the  
or  
button held for a few sec-  
onds to scan faster. Tap the button for frame search.  
9. PLAY/PAUSE – Plays or pauses the CD. A new cue point is set every  
time playback is resumed.  
3. TIME – LCD display reads the time remaining or time elapsed, accord-  
ing to this button.  
10. PITCH BEND – Used to momentarily speed up or down the track. The  
4. HEADPHONE INPUT – Insert either 1/8” or 1/4” plug for your head-  
maximum pitch range is up to +/- 8% from pitch setting.  
phones here.  
11. PITCH FADER – Used to speed up or slow down current track. The  
5. SGL/CTN – Switches between Single or Continuous play mode.  
maximum pitch range is up to +/-8%.  
6. TRACK – Used to select the track to be played. The +10 button skips  
12. LCD DISPLAY – Shows time (minutes, seconds, frame), and pitch  
10 tracks at a time.  
information.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD DISPLAY FUNCTIONS  
16. FRAMES – The CD Player breaks down a second into 75 frames for  
accurate cueing. This shows the frames elapsed or remaining  
depending on mode setting.  
20  
21  
17. TOTAL REMAIN – Displays the total remaining time for the entire  
disc.  
18. REMAIN – Displays the remaining time for the current track.  
19. PITCH – Shows the percentage change in pitch.  
20. TIME BAR – This bar gives a visual approximation of a track’s or  
disc’s remaining time. This bar will begin to flash when a CD or a track  
is ending.  
13  
14  
16  
17  
15  
18  
19  
21. SINGLE – Shows when the unit is set to play just one track at a time.  
When this is not lit, the CD will play continuously through all tracks.  
This function is controlled by the SING/CONT button.  
13. TRACK – Shows the current track that the unit is playing.  
14. MINUTES – Shows the minutes elapsed or remaining depending on  
mode setting.  
15. SECONDS – Shows the seconds elapsed or remaining depending on  
mode setting.  
MIXER FUNCTIONS  
22. INPUT TOGGLE SWITCH – Switches the input source between the  
internal CD decks and the line inputs.  
23. CHANNEL GAIN –Adjusts the pre-fader volume for cleaner sound.  
27  
24. CHANNEL EQ – Adjusts the high, mid and low frequency levels of  
22  
each channel.  
25. INPUT FADER – Controls individual source levels (channels) in the  
23  
mix.  
26. REPLACEABLE CROSSFADER – Achieves clean transitions  
between the two input channels. "Hard left" selects Channel 1. "Hard  
right" selects Channel 2. With the crossfader centered, both channels  
are live. Use the crossfader for fast and seamless fades from one  
channel to the other.  
28  
29  
Note: The crossfader is user replaceable in case of failure. Simply  
unscrew the two large screws that hold it in place, lift it out and dis-  
connect its cable. Re-attach the new crossfader and screw the  
mounting plate back onto the unit - you’re back in business!  
24  
30  
27. RELAY –Set both sides of the CD player to single mode on the con-  
trol. When Disc 1 ends the CD player will automatically change to  
Disc 2 and when Disc 2 ends it will return to Disc 1.  
31  
28. MIC INPUT GAIN – Adjusts the microphone input level.  
29. MASTER LEVEL – Controls the overall output level.  
30. HEADPHONE LEVEL – Adjusts the cue volume.  
25  
32  
31. CHANNEL CUE SELECTOR – Used to route channel audio to your  
headphones.  
32. LEVEL INDICATORS – The dual LEDs indicators are used to indicate  
26  
the pre-fader level of channels 1 and 2.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
REAR PANEL FUNCTIONS  
33. POWER SWITCH – Turns unit off and on. Note*** Remember to turn  
ALL volume levels down when turning on/off the unit.  
34. AC INPUT – This is the connection for the supplied power cable.  
35. MASTER OUTPUT – Unbalanced RCA connectors controlled by the  
Master level.  
36. REC OUTPUT – Unbalanced RCA jacks used to send the output of  
the program to any connected recording device.  
37. LINE INPUTS – Unbalanced RCA jacks for connecting stereo audio  
from line level sources such as CD players, DVD, MP3 players can be  
connected using the included RCA cable.  
NOTE: Plug mono audio sources into both Left and Right inputs using  
a "Y" cable connector.  
38. MIC INPUT – Insert your Microphone with 1/4 ” plug here.  
ADDITIONAL FUNCTIONALITY  
BURNING CD-R’s CD-RW’s  
UPDATING THE FIRMWARE  
When burning CD-R’s or CD-RW’s for the CM.205, it is  
strongly recommended to set your burner at 8x write speed.  
You can change the write speed within your CD burning soft-  
ware. Check the following links for specific instructions:  
Firmware updates may, as necessary, become available from Stanton’s  
ed to create a bootable CD. We recommend using Magic ISO Maker  
• Once you have burned a bootable disc from the ISO file, insert the CD  
into the CM.205 The display will read UPDATE, then SUCCESS.  
• Repeat this process for both decks.  
• Turn the unit off and back on to complete the update process  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
MIXER SECTION  
FREQUENCY RESPONSE (Line to Master Output)  
THD+N (Line)  
20 Hz to 20 kHz +/- 2 dB  
<0.01% at 1 kHz  
>90 dB  
S/N RATIO: REF TO MAX OUTPUT LEVEL (Dynamic Range)  
Noise Floor (Line Input to Any Output) (Unbalanced Out)  
-85 dBV  
<
(Line to Line,Phono to Line,Line to Phono)  
CROSS TALK  
< -85 dB @ 1 kHz  
< -85 dB @ 1 kHz  
< -75 dB @ 1 kHz  
CHANNEL FADER KILL  
CROSS FADER KILL  
Channel EQ  
Hi  
+9 dB, -16dB @13HZ  
Mid +9 dB, -23dB @1HZ  
Low +9 dB, -23dB @70HZ  
CD SECTION  
FREQUENCY RESPONSE (CD to Master Output)  
THD+N WITH 20 KHZ LOW PASS FILTER  
S/N RATIO:( ref Full-Scale)  
20 Hz to 20 kHz +/- 2.0 dB  
0.05% at 1 kHz  
>85 dB  
MICROPHONE  
FREQUENCY RESPONSE (Mic to Master Output)  
THD+N With 20 kHz Low Pass Filter  
Mic EIN:  
20 Hz to 20 kHz +/- 2.0 dB  
0.05% at 1 kHz  
>110 dBV  
INPUT/OUTPUT  
LINE INPUTS  
2 x Stereo RCA -14 dBV/nominal input level 18 k Ohm unbalanced  
1x TRS -54 dBV/nominal input level 10k Ohm Balanced  
2x RCA unbalanced nominal load 10k Ohms  
2x RCA unbalanced -10dBV into 10k ohm load  
1x 1/4” Phone Jack Max Load 33 Ohms  
MIC INPUT  
MASTER OUTPUT  
RECORD OUTPUT  
HEADPHONE OUTPUT  
1x 1/8” Mini Phone Jack  
GENERAL  
SYSTEM  
Compact Disc Digital Audio  
Top Loading  
DISC LOADING  
DISPLAY  
12 Digit LCD Display  
Within +/- 8%  
PITCH CONTROL RANGE  
PITCH BEND  
PITCH ACCURACY  
+/- 8%  
+/-0.15%  
PHYSICAL SPECIFICATIONS  
DIMENSIONS  
440 (W) x 266(D) x110.5(H) mm  
4.4 Kgs.  
WEIGHT (UNIT)  
OPERATING TEMPERATURE  
STORAGE TEMPERATURE  
POWER SOURCE  
0 ºC to 40 ºC  
-20  
to 50  
ºC  
ºC  
US: 120V, 60Hz, AC 27W  
EU: 230V, 50Hz, AC 27W  
UK: 240V, 50Hz, AC 27W  
JPN:100V,  
AUS:240V,  
ARG:220V,  
50/60Hz,  
50Hz, AC 27W  
50Hz, AC 27W  
AC 27W  
REPLACEMENT PARTS  
Contact your local reseller to order replacement parts.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY & RETURN POLICY  
Warranty  
Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair  
or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective  
in material or workmanship for a period of one (1) year following the date of original purchase. Exceptions to this warranty are as noted below:  
The warranty for mechanical parts which are subject to wear and tear are limited to the earlier to occur of thirty (30) days following the date of original  
purchase or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000.  
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of mis-  
use, alteration, normal wear, or accident are not covered under this warranty.  
Returns  
Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country. All goods requiring warranty repair or replace-  
ment must be returned (freight prepaid if not hand-delivered) to the authorized Stanton dealer from whom the merchandise was purchased and in the  
same country where the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise must be returned to the author-  
ized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton  
dealer in the country where the purchaser is located or the country in which the merchandise was received. Any returns to a non-authorized dealer or to  
an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty.  
To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized  
Stanton dealer’s return policy.  
Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise.  
Stanton’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating  
to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will Stanton be liable for any  
special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negl gence  
of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of  
merchantability or fitness for a particular purpose.  
The above warranty provides you with specific legal rights. You may also have additional rights, which are subject to variation from state to state and  
country to country.  
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above, please include a written expla-  
nation with the merchandise when returned pursuant to the terms and conditions set forth herein.  
Stanton Magnetics, Inc, 3000 SW 42 St. Hollywood, Florida 33312.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Microphone e965 User Manual
Sierra Wireless Modem 2130374 v3 User Manual
Sony Car Satellite TV System KV 32FX65 B User Manual
Sony Digital Camera 4 420 016 221 User Manual
Sony Portable Speaker SA VE356T User Manual
Sony Portable Speaker SRS T80 User Manual
Sony Saw XS L10S User Manual
Sony Speaker System SS XB3E User Manual
Summer Infant Baby Monitor 02180A User Manual
Sunbeam Coffeemaker HDX23 33 User Manual