3-283-288-11(1)
Wireless Speaker
System
Operating Instructions
SRS-BT100
©2008 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table Of Contents
Features ..................................... 4
Using the Bluetooth connection .......... 5
Unpacking ..................................6
Location and Function
of Parts ...................................7
Power Sources ..........................8
Using the Bluetooth
Connection .............................9
On pairing............................................ 9
On indicators ....................................... 9
Pairing with a source device.............. 10
Listening to the sound ....................... 11
Using by Connecting with a
Cord ......................................13
Hooking up the speaker ..................... 13
Listening to the sound ....................... 14
Precautions..............................15
Troubleshooting ......................17
Common ............................................ 17
When using the Bluetooth
connection ..................................... 17
Initializing This Unit ................18
What is Bluetooth
technology? .........................19
Specifications ..........................20
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
This unit is a wireless speaker system that uses Bluetooth™ wireless technology.
•
•
Enjoy music wirelessly from Bluetooth™ Stereo enabled music players, mobile phones
and PC's.*
Bluetooth Version 2.0 + EDR (Enhanced Data Rate) for higher quality audio with less
interference.
•
•
•
Powerful sound with 30W amplifiers and MegaBass.
Wireless volume control with AVRCP volume Up/Down compatible devices.
Includes one analog input for direct connection from music players and other audio
devices.
•
Magnetically-shielded design for use near your TV or monitor.
Enjoying listening to sound wirelessly by connecting Bluetooth
wireless technology
You can enjoy listening to sound wirelessly by connecting Bluetooth supported devices
(such as a mobile phone, digital music player, digital music player connected to a Bluetooth
transmitter, or personal computer)* to the unit. The unit receives stereo audio signals from
the source device.
Bluetooth stereo
audio source device
This unit
Enjoying listening to sound by connecting by wiring an audio device
to the INPUT jack
You can enjoy listening to the sound from a device connected to the INPUT jack.
Portable audio device, computer, etc.
*
Bluetooth devices to be connected with this unit are required to support A2DP
(Advanced Audio Distribution Profile).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Bluetooth connection
In the example below, we explain how to receive the sound played on a Bluetooth mobile
phone with the sound playback function and listen to the sound on this unit.
Pairing
Enables a Bluetooth mobile phone and this unit to recognize one another.
Pairing
Bluetooth
This unit
mobile phone
For more details, see pages 9 and 10.
v
Bluetooth connection
Operate the Bluetooth mobile phone to make the Bluetooth connection.
Connection
v
Listening to the sound
Enjoy listening to the sound played on the Bluetooth mobile phone through this
unit.
Stereo audio signal
(Streaming)
For more details, see page 11.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Unpacking
Check that you have the following items:
• Wireless Speaker System (1)
• AC power adaptor (1)
• AC power cord (1)
• Operating Instructions (1)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and Function of Parts
1 1 (power) button
Press to turn on the unit. Press and
hold to turn off the unit.
6 DC IN 12 V jack
Connects the supplied AC power
adaptor.
2 ID SET (pairing) button
For pairing with other Bluetooth
device.
7 INPUT (audio input) jack
Connects to headphone jack of a
computer, portable audio device, etc.
3 VOLUME +/– buttons
Adjust the volume.
A beep sounds when the volume is set
to minimum or maximum.
4 Power indicator (green)
5 Communication status
indicator (blue)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Sources
Connect the supplied AC power adaptor to the unit.
to wall outlet
(rear)
AC power adaptor
(supplied)
to DC IN 12 V jack
Note
When connecting or disconnecting the AC power adaptor, turn off the system beforehand. Otherwise, it
may cause malfunction.
Note on the AC power adaptor
Use only the supplied AC power adaptor. Do not use any other AC power adaptor to avoid damaging the
speaker.
Polarity of the plug
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE UNIT
Using the Bluetooth Connection
By using the Bluetooth connection, you can listen to the sound from a Bluetooth stereo
audio source device with this unit wirelessly.
Example
Bluetooth mobile phone or
other Bluetooth stereo audio
source device
This unit
Note
For details on how to operate the device to be connected, refer to the operating instructions supplied with
the device.
On pairing
What is pairing?
Bluetooth devices need to be “paired” with each other beforehand.
Once Bluetooth devices are paired, there is no need for pairing again, except in the
following cases:
•
•
Pairing information is deleted after repair, etc.
This unit is paired with 9 or more devices.
This unit can be paired with up to 8 Bluetooth stereo audio source devices. If a new
device is paired after 8 devices have been paired, the device whose latest connection time
is the oldest among the 8 paired devices is replaced by the new one.
This unit is initialized.
•
All pairing information is deleted (See page 18).
See page 10 on how to pair devices.
On indicators
Status
Power indicator (green)
Communication status
indicator (blue)
Power on
Lights up
Flashes
Off
Pairing mode
Flashes
Lights up
Connecting or
communicating
Lights up
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing with a source device
Check the following before operating the unit.
–
This unit is connected to a power source.
1
Press and hold the ID SET button for 7 seconds or more.
When the power indicator (green) and communication status indicator (blue) start
flashing together, release the button. This unit enters pairing mode.
Note
Pairing mode is cancelled and this unit is turned off after about 5 minutes. If the pairing mode is
cancelled while performing this procedure, start over from step 1.
2
Perform the pairing procedure on the Bluetooth stereo audio source
device to detect this unit.
The list of detected devices appears on the display of the Bluetooth stereo audio source
device.
This unit is displayed as “SRS-BT100.”
If “SRS-BT100” is not displayed, repeat from step 1.
Notes
• When pairing, be sure to place both the Bluetooth devices within 1 m of each other.
• Some devices cannot display the list of detected devices.
3
4
Select “SRS-BT100” shown in the display of the Bluetooth stereo audio
source device.
If Passcode* input is required on the display of the Bluetooth stereo
audio source device, input “0000.”
*
Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”
5
Start the Bluetooth connection from the Bluetooth device.
Some Bluetooth stereo audio source devices may connect with the unit automatically
when pairing is complete.
When the Bluetooth connection is made properly, both the power indicator (green) and
communication status indicator (blue) light up indicating that pairing is complete, and
pairing information is memorized on this unit.
Note
If you turn off this unit or the Bluetooth stereo audio source device before the Bluetooth connection
is complete, pairing information is not memorized and pairing will not be completed.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
When pairing with a Bluetooth stereo audio source device that cannot display a list of
detected devices or that has no display
You may pair the device by setting both this unit and the Bluetooth stereo audio source device to pairing
mode. For details, refer to the operating instructions supplied with the device.
If pairing is not complete
Start over from step 1.
Tip
To pair with other Bluetooth devices, repeat steps 1 to 5 for each device.
Note
Passcode of this unit is fixed to “0000.” This unit cannot be paired with a Bluetooth stereo audio source
device whose Passcode is not “0000.”
Listening to the sound
This unit supports SCMS-T content protection. You can enjoy music, etc., from a device
such as a mobile phone or portable TV that supports SCMS-T content protection.
Check the following before operating the unit.
–
–
–
The Bluetooth stereo audio source device’s Bluetooth function is on.
Pairing of this unit and the Bluetooth stereo audio source device is complete.
If you have been listening to the sound from a source device connected to the INPUT jack, stop
playing on the device or turn off the device.
1
2
Press the 1 button to turn on this unit.
Start the Bluetooth connection from the Bluetooth stereo audio source
device.
3
Start playing on the Bluetooth stereo audio source device.
Note
If the source device has a bass boost function or equalizer function, set them to off. If these
functions are on, sound may be distorted.
4
Adjust the volume.
Set the volume of the Bluetooth stereo audio source device to moderate level, and press
the VOLUME +/– buttons on this unit.
Note
A beep sounds when the volume is set to minimum or maximum.
Notes
• In the following cases, you need to make the Bluetooth connection again.
– The power of this unit does not turn on.
– The power of the Bluetooth stereo audio source device does not turn on, or the Bluetooth function is
off.
– The Bluetooth function of this unit or the Bluetooth stereo audio source device is in sleep mode.
– The Bluetooth connection is not made.
• When the sound of a Bluetooth stereo audio device is being reproduced using the Bluetooth connection (when
both the power indicator (green) and communication status indicator (blue) light up), the sound from a device
connected to the INPUT jack cannot be heard. Terminate Bluetooth connection to listen to the sound of a device
connected to the INPUT jack.
Continued 11
Download from Www.Somanuals.com. All Manuals Search And Download.
To finish listening
Terminate the Bluetooth connection by any of the operations below.
–
Operate the Bluetooth stereo audio source device to terminate the connection. For details, refer to the
operating instructions supplied with the device.
–
–
Turn off the Bluetooth stereo audio source device.
Turn off this unit.
Tip
You can adjust the volume of this unit with the Bluetooth stereo audio source device supporting AVRCP
(Audio/Visual Remote Control Profile) Volume UP/DOWN. For details, refer to the operating
instructions supplied with the device.
Note
The volume of this unit may not be controlled as intended depending on the device.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using by Connecting with a Cord
You can listen to the sound from a device connected to the INPUT jack.
Example
This unit
Portable audio device, computer, etc.
Note
For details on how to operate the device to be connected, refer to the operating instructions supplied with
the device.
Hooking up the speaker
RK-G136 connecting cord
(optional)
To headphones jack
(stereo minijack)
(rear)
to INPUT jack
Portable audio device, computer, etc.
Connect the speaker to the source device.
When the system is connected to the monaural jack of the source
device
The sound may not come through the right speaker. In such a case, use the optional* plug
adaptor PC-236MS.
To connect to a stereo phone-type headphones jack
Use the optional connecting cord RK-G136 and plug adaptor PC-234S, or optional
connecting cords RK-G136 and RK-G138.*
* The above optional accessories are not provided in some areas.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the sound
1 button
VOLUME +/– buttons
Check the following before operating the unit.
–
If you have been listening to the sound from a Bluetooth stereo audio source device, terminate the
Bluetooth connection.
1
Press the 1 button to turn on this unit.
The power indicator (green) lights up.
2
3
Start playing on the source device.
Adjust the volume.
Set the volume of the source device to moderate level, and press the VOLUME +/–
buttons on this unit.
Note
A beep sounds when the volume is set to minimum or maximum.
4
Press and hold the 1 button to turn off this unit after using.
The power indicator goes off.
Notes
• If connecting the speaker to a device with a built-in radio or tuner, radio broadcasting cannot be received or
sensitivity may be reduced significantly.
• If the source device has a bass boost function or equalizer function, set them to off. If these functions are on,
sound may be distorted.
• If the source device’s headphone output has a line switch, better sound will be heard if it is set to on. See the
operating instructions of the source device.
• When the sound of a Bluetooth stereo audio device is being reproduced using the Bluetooth connection (when
both the power indicator (green) and communication status indicator (blue) light up), the sound from a device
connected to the INPUT jack cannot be heard. Terminate Bluetooth connection to listen to the sound of a device
connected to the INPUT jack.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
Precautions
On Bluetooth communication
• Bluetooth wireless technology operates within
a range of about 10 meters. Maximum
communication range may vary depending on
obstacles (person, metal, wall, etc.) or
electromagnetic environment.
• Microwaves emitting from a Bluetooth device
may affect the operation of electronic medical
devices. Turn off this unit and other Bluetooth
devices in the following locations, as it may
cause an accident.
– where inflammable gas is present, in a
hospital, train, airplane, or a gas station
– near automatic doors or a fire alarm
• This unit supports security capabilities that
comply with the Bluetooth standard to provide
a secure connection when the Bluetooth
wireless technology is used, but security may
not be enough depending on the setting. Be
careful when communicating using Bluetooth
wireless technology.
• We do not take any responsibility for the
leakage of information during Bluetooth
communication.
• Connection with all Bluetooth devices cannot
be guaranteed.
This unit
Steel cabinet
Optimal performance
Limited performance
– A device featuring the Bluetooth function is
required to conform to the Bluetooth
standard specified by Bluetooth SIG, and be
authenticated.
– Even if the connected device conforms to the
above mentioned Bluetooth standard, some
devices may not be connected or work
correctly, depending on the features or
specifications of the device.
• The following conditions may affect the
sensitivity of Bluetooth communication.
– There is an obstacle such as a person, metal,
or wall between this unit and Bluetooth
device.
– A device using the 2.4 GHz frequency, such
as a wireless LAN device, cordless
telephone, or microwave oven, is in use near
this unit.
• Depending on the device to be connected, it
may require some time to start communication.
– This unit is installed on a shelf made of steel.
• Because Bluetooth devices and wireless LAN
(IEEE802.11b/g) use the same frequency,
microwave interference may occur and
resulting in communication speed
deterioration, noise, or invalid connection if
this unit is used near a wireless LAN device. In
such a case, perform the following.
– Use this unit at least 10 m away from the
wireless LAN device.
– If this unit is used within 10 m of a wireless
LAN device, turn off the wireless LAN
device.
– Install this unit and Bluetooth device as near
to each other as possible.
Notes when using with a mobile
phone
• You cannot use this unit to talk over the
telephone, even if the Bluetooth connection
between this unit and a mobile phone is made.
• For details on operation of your mobile phone
when receiving a telephone call while
transmitting the sound using the Bluetooth
connection, refer to the operating instructions
supplied with the mobile phone.
Continued 15
Download from Www.Somanuals.com. All Manuals Search And Download.
On safety
On cleaning
The nameplate indicating Sony trademark,
model number and electrical rating is
located on the bottom exterior of this unit.
• Before operating the system, be sure that
the operating voltage of the system is
identical with that of your local power
supply.
Do not use alcohol, benzine, or thinner to
clean the cabinet.
If the TV picture or monitor
display is magnetically
distorted
Although this system is magnetically
shielded, there may be cases that the
picture on some TV sets/personal
computer sets may become magnetically
distorted. In such a case, turn off the power
of the TV set/personal computer set once,
and after 15 to 30 minutes turn it on again.
For the personal computer set, take the
appropriate measures such as data storage
before turning it off.
Where purchased Operating voltage
All countries/regions 100 – 240 V AC, 50/60 Hz
• Use only the supplied AC power
adaptor.
• The unit is not disconnected from the
mains as long as it is connected to the
AC outlet, even if the unit itself has been
turned off.
When there seems to be no improvement,
locate the system further away from the
TV set/personal computer set.
Furthermore, be sure not to place objects
in which magnets are attached or used near
the TV set/personal computer set, such as
audio racks, TV stands, toys etc. These
may cause magnetic distortion to the
picture due to their interaction with the
system.
On placement
• Do not set the speaker in an inclined
position.
• Do not leave the system in a location
near heat sources, or in a place subject to
direct sunlight, excessive dust, moisture,
rain or mechanical shock.
On operation
• Do not open the cabinet. Refer servicing
to qualified personnel only.
Others
• If you have any questions or problems
concerning this unit that are not covered
in this manual, please consult your
nearest Sony dealer.
• Should any problem persist, consult your
nearest Sony dealer.
• Should any solid object or liquid fall into
the system, have the system checked by
qualified personnel before operating it
any further.
• Although this system is magnetically
shielded, do not leave recorded tapes,
watches, personal credit cards, or floppy
disks with magnetic coding in front of
the system for an extended period of
time.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you run into any problems using this unit, use the following checklist. Should any
problem persist, consult your nearest Sony dealer.
Common
No sound
When using the Bluetooth
connection
, Check that both this unit and the source
device are turned on.
No sound
, Ensure that this unit is not too far from the
Bluetooth stereo audio source device, or this
unit is not receiving interference from a
wireless LAN, other 2.4 GHz wireless
device, or microwave oven.
, Turn up the volume of the unit.
, Turn up the volume of the source device as
high as possible to the extent that sound is
not distorted. For details on volume
adjustment, refer to the operating instructions
supplied with the device.
, Check that the Bluetooth connection is made
properly between this unit and the Bluetooth
stereo audio source device.
, Make sure all the connections have been
correctly made.
, Pair this unit and the Bluetooth stereo audio
source device again.
Low sound level
, Turn up the volume of the source device as
high as possible to the extent that sound is
not distorted. For details on volume
adjustment, refer to the operating instructions
supplied with the device.
Sound skips or the
correspondence distance is
short.
, If a device that generates electromagnetic
radiation, such as a wireless LAN, other
Bluetooth device(s), or a microwave oven is
nearby, move away from such sources.
, Remove any obstacle between this unit and
other Bluetooth device or move away from
the obstacle.
, Turn up the volume of the unit.
Distorted sound
, Turn down the volume of the source device
to the point where the sound is no longer
distorted. For details on volume adjustment,
refer to the operating instructions supplied
with the device.
, Locate this unit and other Bluetooth
device(s) as near as possible.
, If the source device has a bass boosts
, Re-position this unit.
, Re-position other Bluetooth device.
function, set it to off.
, Turn down the volume of the unit.
Pairing cannot be done.
, Bring this unit and the Bluetooth device
closer together.
There is hum or noise in the
speaker output.
, Make sure all the connections have been
correctly made.
Sound is delayed.
, If you watch a TV or a DVD through
Bluetooth connection via this unit, sound
may lag behind the picture.
, Make sure none of the audio devices are
positioned too close to the TV set.
The brightness of the power
indicator is unstable.
, The brightness of the power indicator may
become unstable when the volume is turned
up. This is not malfunction.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Initializing This Unit
You can reset this unit to its default and delete all pairing information.
1 If this unit is turned on, press and hold the 1 button to turn off this
unit.
2 While holding the 1 button, press the ID SET button for 7 seconds or
more.
The power indicator (green) and the communication status indicator (blue) flash four
times, and this unit is reset to the default setting. All pairing information is deleted.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
What is Bluetooth technology?
Bluetooth wireless technology is a short-range wireless technology that enables wireless
data communication between digital devices, such as a computer or digital camera.
Bluetooth wireless technology operates within a range of about 10 meters. Connecting two
devices as necessary is common, but some devices can be connected to multiple devices at
the same time.*
You do not need to use a cable for connection since Bluetooth technology is a wireless
technology, nor is it necessary for the devices to face one another, such is the case with
infrared technology. For example, you can use such a device in a bag or pocket.
Bluetooth technology is an international standard supported by thousands of companies all
over the world, and employed by various companies worldwide.
* This unit cannot be connected to multiple devices at the same time.
Communication System and Compatible Bluetooth Profiles of this
unit
Profile is standardization of the function for each Bluetooth device specification. This unit
supports the following Bluetooth version and profiles:
Communication System: Bluetooth Specification version 2.0
Compatible Bluetooth Profiles:
– A2DP (Advanced Audio Distribution Profile)
– AVRCP (Audio/Visual Remote Control Profile) Volume UP/DOWN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Frequency band
2.4 GHz band (2.4000 GHz–2.4835 GHz)
Speaker section
Speaker system
Modulation method
FHSS
Compatible Bluetooth profiles*2
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Visual Remote Control Profile)
Volume UP/DOWN
90 mm, Full range, magnetically shielded
Enclosure type
Bass reflex
Impedance
4 Ω
Rated input power
15 W
3
Supported codecs
SBC*4, MP3
*
Maximum input power
Supported contents protection
30 W
SCMS-T
1
Amplifier section
Rated output
15 W + 15 W (10% T.H.D., 1 kHz, 4 Ω)
Bass Boost
*
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
software application, etc.
Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
MEGA BASS
2
*
Audio input
Stereo minijack × 1
3
4
Input impedance
4.7 kΩ (at 1 kHz)
*
Codec: Audio signal compression and
conversion format
Subband Codec
*
General
Power
Supplied accessories
AC power cord (1)
AC power adaptor (1)
Operating Instructions (1)
DC 12V (supplied AC power adaptor)
Dimensions (w/h/d)
Approx. 400 × 160 × 175 mm
(15 3/4 × 6 3/8 × 7 in.)
Mass
Optional accessories
Connecting cord RK-G136, RK-G138
Plug adaptor PC-234S, PC-236MS
Approx. 2.5 kg (5 lb. 8 oz.)
Communication System
Bluetooth Specification version 2.0 + EDR
The above optional accessories are not provided
in some areas.
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (30 ft)*1
Design and specifications are subject to change
without notice.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|