4-079-943-22
DIRECTV™ Re ce ive r
w it h
UltimateTV® Service from Microsoft ®
Dig it a l Sa t e llit e Re ce ive r/Re co rd e r
In st a lla t io n Gu id e
Before you begin using your DIRECTV Receiver with
UltimateTV service:
• Make sure your Satellite Dish Antenna is properly installed.
• Follow the steps in “Connecting Your DIRECTV Receiver” on
pages 7-12.
• Activate DIRECTV® programming and UltimateTV by calling:
1-800-DIRECTV (347-3288)
SAT-W60
© 2000 by Sony Electronics Inc. Reproduction in whole or in part
without written permission is prohibited. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
obtained. Sony may elect to provide to User
updates and other support services for the
licensed Software. All updates provided to User
shall constitute licensed Software under this
License, and such updates shall be governed by
the terms hereof.
SONY SOFTWARE
LICENSE AGREEMENT
ATTENTION: USE OF THE SOFTWARE IS
SUBJECT TO THE SONY SOFTWARE LICENSE
TERMS SET FORTH BELOW. USING THE
SOFTWARE OR THE PRODUCT IN WHICH IT
IS INCORPORATED INDICATES USER’S
ACCEPTANCE OF THESE LICENSE TERMS. IF
THE USER DOES NOT ACCEPT THESE
LICENSE TERMS, THE USER MAY
Intellectual Property
The Software is owned and copyrighted by Sony,
its affiliates or its third party licensors. User’s
license confers no title or ownership in the
Software and is not a sale of any rights in the
Software. Sony's affiliates and/ or third party
suppliers may protect their rights directly in the
event of any User’s violation of this Agreement.
The trademarks, tradenames, Product
IMMEDIATELY RETURN THE ENTIRE
PRODUCT IN ITS ORIGINAL PACKING FOR A
FULL REFUND OF THE PURCHASE PRICE.
designation, logos and service marks ("Marks")
displayed with this Software are the property of
Sony, its affiliates or third party licensors, and
User shall acquire no rights of any kind in or to
any Mark under which the Software and/ or
Products are marketed. User is not permitted to
use these Marks without the prior written
consent of Sony, its affiliates or the applicable
third party licensor which may own the Mark.
"Sony" is a registered trademark of Sony
Corporation. User agrees not to remove, alter or
destroy any patent, trademark or copyright
markings or notices placed upon or contained
within the Software , User Manuals or
documentation. User further agrees to insert and
maintain with the Software and any
License and Restrictions
Sony Electronics Inc. (“Sony”) grants User a
license to Use one copy of the software which is
provided to you as part of this Sony product
(“Software”). "Use" means storing, loading,
installing, executing or displaying the Software.
User may not copy, modify the Software or
disable any licensing or control features of the
Software. No portion of the Software may be
reproduced in any form, or by any means,
without prior written permission from Sony.
User is not permitted to modify, distribute,
publish, transmit or create derivative works of
any Software included for any public or
commercial purposes. In consideration of this
authorization, User agrees that any copy of this
Software which User makes shall retain all
copyright and other proprietary notices in the
same form and manner as on the original. Except
as specified above, nothing contained herein shall
be construed as conferring by implication,
estoppel or otherwise any license or right under
any patent, trademark or copyright of Sony, its
affiliates or any third party licensor. User may not
in any way sell, lease, rent, license, sublicense or
otherwise distribute the Software. The Software
may only be accessed by the functionality of the
Sony product in which the Software is
documentation a copyright notice in User’s name.
Termination
User’s license will automatically terminate upon
any transfer of the Product. Upon transfer, User
must deliver the Software, including any copies
and related documentation, to the transferee. The
transferee must accept these License Terms as a
condition to the transfer. Otherwise, Sony does
not authorize the transfer and the User and
transferee will be in violation of this Agreement
should the transferee use the Product. This
license will automatically terminate upon User’s
failure to comply with any of these License
Terms. Upon termination, User must stop using
the Product and immediately destroy the
Software, together with all copies, adaptations
and merged portions in any form and/ or return it
to Sony.
incorporated by Sony (the “Product(s)”), and a
User shall not intentionally make the Software
directly accessible to others or to hardware other
than the Products, or otherwise expose an API.
Nothing in this Agreement grants User any
rights, license or interest with respect to source
code of the Software. User shall not modify,
translate, reverse engineer, decompile or
disassemble the Software or any part thereof or
otherwise attempt to derive source code or create
derivative works therefrom, and shall not
authorize any third party to do any of the
foregoing unless Sony's prior written consent is
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Export Requirements and U.S.
Government Restricted Rights
User may not export or re-export the Software or
any copy or adaptation in violation of any
applicable laws or regulations. The Software and
documentation have been developed entirely at
private expense and are provided as
"Commercial Computer Software - Restricted
Rights" in accordance with FAR 52.227-19 (1987)
or limited rights in technical data in accordance
with FAR 52.227-14 (1987). User has only those
rights provided for such Software and
POSSIBILITY OF SUCH DAMAGES. IN NO
EVENT WILL SONY OR ANY OF ITS
AFFILIATES OR THIRD PARTY LICENSOR’S
LIABILITY UNDER AGREEMENT, WHETHER
IN CONTRACT, TORT OR OTHERWISE,
EXCEED THE COST OF THE PRODUCT.
General
This Agreement shall be deemed to have been
made and executed in the State of California and
both parties agree that any dispute arising
hereunder related to this Agreement or the
Product will be governed by laws of the State of
California, exclusive of its conflicts of law
principles and that the courts in the County of
San Diego, California will have exclusive
jurisdiction over all such disputes. FURTHER
THE PARTIES HEREBY WAIVE TRIAL BY JURY
IN CONNECTION WITH ANY ACTION OR
SUIT ARISING UNDER THIS AGREEMENT OR
OTHERWISE ARISING FROM THE
RELATIONSHIP BETWEEN THE PARTIES
HERETO. This Agreement shall be binding upon
the parties’ authorized successor and assignees.
Neither party’s waiver of any breach or failure to
enforce any of the provisions of this Agreement at
any time shall in any way affect, limit or waive
such party’s right thereafter to enforce and
compel strict compliance with every other
provision. No modification of this Agreement
shall be effective unless in writing signed by both
parties.
documentation by the applicable FAR or DFARS
clause or this Sony Software License Agreement.
Limited Warranty
Sony warrants to User that the Software will not
fail to execute its programming instructions due
to defects in material and workmanship for a
period equal to the warranty period provided for
the Product when properly installed and used.
Warranty does not apply to defects resulting from
(a) improper or inadequate maintenance, (b)
software, interfacing, parts or supplies not
supplied by Sony, (c) unauthorized modification
of the Software or the Product, or (d) improper
site preparation or maintenance. If Sony receives
notice of a covered defect(s) during the warranty
period, Sony will replace Software that does not
execute its programming instructions due to such
defect(s). Sony does not warrant that the
operation of the Software and/ or Product will be
uninterrupted or error free. If Sony is unable,
within a reasonable time, to repair or replace any
Software to a condition as warranted, User shall
be entitled to a refund of the purchase price upon
prompt return of the Product.
EXCEPT AS SPECIFICALLY STATED ABOVE,
THE SOFTWARE IS PROVIDED “AS IS”
WITHOUT WARRANTY AND SONY, IT S
AFFILIATES AND ITS THIRD PARTY
LICENSORS DISCLAIM ANY IMPLIED
WARRANTY OF NONINFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. THE REMEDIES IN
THIS WARRANTY STATEMENT ARE USER’S
SOLE AND EXCLUSIVE REMEDIES. EXCEPT
AS INDICATED ABOVE, IN NO EVENT WILL
SONY, ITS AFFILIATES OR ANY OF ITS THIRD
PARTY LICENSORS BE LIABLE FOR LOSS OF
DATA OR FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, CONSEQUENTIAL
(INCLUDING LOST PROFIT), EXEMPLARY, OR
OTHER DAMAGE, WHETHER BASED IN
CONTRACT, TORT, OR OTHERWISE, EVEN IF
SUCH PARTY HAS BEEN ADVISED OF THE
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Connecting Your Satellite Receiver ................................... 7
Package Contents................................................................................7
Cables and Jacks..................................................................................8
Connection Overview ......................................................................9
Step 1: Connecting the Antenna .....................................................10
Step 2: Connecting Your Phone Line .............................................10
Step 3: Connecting Your TV Set......................................................11
Step 4: Connecting the AC Power ..................................................12
Step 5: Checking the Access Card ..................................................12
Step 6: Activating Your Service ......................................................12
Making Advanced Connections ....................................... 13
Advanced Connection: Connecting Your VCR ............................13
Advanced Connection: Connecting Your IR Blaster ...................14
Advanced Connection: Connecting an Audio System ................15
Advanced Connection: Connecting a Microphone......................15
Advanced Connection: Connecting a Printer ...............................16
Advanced Connection: Connecting a Camcorder........................16
Using Your Remote Control ............................................. 17
Batteries for the Remote Control ....................................................17
Selecting Items...................................................................................18
Setting up the Remote Control........................................................21
Manufacturer Codes.........................................................................22
Other Information ............................................................. 23
Front Panel Controls & Terminals..................................................23
Back Panel Terminals .......................................................................24
Specifications .....................................................................................25
Troubleshooting ...............................................................................26
Limited Warranty .............................................................................28
FCC Regulations and Information ...............................................30
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Satellite Receiver
Package Contents
Make sure you have received all of the following items in your Satellite
Receiver package.
SAT
MUT
ING
POWER
TV
TV/VIDEO
FUNCTION
TV
SAT
PIP
WINDOW
MENU
EXIT
1
2
3
6
4
5
RECENT
7
8
9
ENTER TV/WEB
.
0
HOME
BA
CK
MY SHOWS
Satellite Receiver
OPTIONS
INFO
GUIDE
CH
VOL
SCROLL
CODE SET
RM-Y804
Boxed separately
WEB
Esc
F1
F2
F3
F4
F5
F6
F7
Fav
Home
Search
Mail
Find
Info
GoTo
Save
Send
Delete
Edit
|
\
Tab
Back
Caps
Lock
Scroll
Up
Return
Scroll
Down
Shift
Shift
Cmd
Fn
Alt
Ctrl
Alt
Recent
Option
Keyboard
Keyboard Manual
Size AA
(For keyboard instructions, please
refer to the keyboard manual)
Batteries (2)
✍ If you are missing any of these items, contact your Sony dealer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Below is a description of the jacks and cables you can use to make
connections. Note that not all cables come with your Satellite Receiver.
VHF/UHF Ja cks a n d Co a xia l (RF) Ca b le
Use the VHF/ UHF IN jacks to receive signals from a TV antenna or
from a cable TV connection. You can also use the VHF(SAT)/ UHF
OUT jack to send audio and video signals to your TV.
SATELLITE IN Ja cks a n d RG-6 Co a xia l ca b le
Use the SATELLITE IN jacks to receive signals from your Satellite
Dish Antenna with RG-6 coaxial cable.
Au d io /Vid e o Ja cks a n d Au d io /Vid e o Ca b le s (RCA-t yp e )
Use the audio/ video jacks to send good quality analog video and
stereo audio signals.
S-VIDEO Ja ck a n d S-VIDEO Ca b le s
Use the S-VIDEO jack to send excellent quality analog video signal.
DIGITAL AUDIO OUT (OPTICAL) Ja ck a n d Op t ica l Ca b le
Use the DIGITAL AUDIO OUT (OPTICAL) jack to send excellent
quality audio signal.
TEL LINE Ja ck a n d RJ-11 Te le p h o n e Ca b le
Use the TEL LINE jack to connect to a telephone outlet. If you
subscribe to DIRECTV programming, some services require a
continuously connected telephone line. The telephone line
connection is used to periodically call out to DIRECTV and to use for
connection to the UltimateTV service. (connection is needed for
DIRECTV and UltimateTV service)
IR Bla st e r Ja ck a n d Co n t ro lle r
Use the IR jack to connect your Infrared Controller to your Satellite
Receiver. This allows you to control your VCR and/ or Cable Box
through your Satellite Receiver.
MIC (Micro p h o n e ) Ja ck
Use the MIC jack to connect to an external microphone. This allows
you to record and send voice messages on the Web in e-mail notes.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Satellite Receiver
Connection Overview
Follow the procedures or make the connections in each of the steps to
connect your Satellite Receiver.
St e p 1: Co n n e ct in g t h e An t e n n a
Pa g e 10
v
St e p 2: Co n n e ct in g t h e Te le p h o n e Lin e
Pa g e 10
v
St e p 3: Co n n e ct in g Yo u r TV
Pa g e 11
v
St e p 4: Co n n e ct in g t h e AC Po w e r
Pa g e 12
v
St e p 5: Ch e ckin g t h e Acce ss Ca rd
Pa g e 12
v
St e p 6: Act iva t in g Yo u r Se rvice
Pa g e 12
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Connecting the Antenna
Satellite Receiver
Connect the SATELLITE IN jack
to your Satellite Dish Antenna
1
2
1
using RG-6 coaxial cable.
Connect the 2nd signal if you
have Dual LNB. Advance Set
2
Up for dual output.
Step 2: Connecting Your Phone Line
Satellite Receiver
Connect the TELEPHONE
1
1
LINE jack to a telephone
line w all jack using the
supplied telephone cord.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Satellite Receiver
Step 3: Connecting Your TV Set
Satellite Receiver
1c
1a
TV
VHF / UHF
1b
IN
VIDEO 1 VIDEO 2
S VIDEO
VIDEO
L
MONO
(
)
AUDIO
R
If your TV has A/V input jacks
Connect the VIDEO OUT jacks on your Satellite Receiver to the
1a
A/ V input jacks on your TV using the supplied A/ V cable. (Be sure to match the
colors on the jacks with the colored plugs on the A/ V cable.) If your TV has only
one audio input, connect it to the L(MONO) jack on the Satellite Receiver.
If your TV has an S-Video input
Use an S-Video cable instead of the yellow video connection. S-Video cable is
supplied.
1b
1c
If your TV does not have A/V jacks
Connect the VHF/ UHF OUT jack to the VHF/ UHF input jack on your TV using
coaxial cable. Set the CH3/ CH4 switch to the channel that does not carry off-air
broadcasts in your area.
Note
With this connection, your input source
is channel 3 or channel 4 depending on
how you set the CH3/ CH4 switch on the
Satellite Receiver.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Connecting the AC Power
Satellite Receiver
After all other connections are
AC Pow er Cord
1
1
complete, connect the AC Power Cord
to the Satellite Receiver. Then connect
the AC Power Cord to a power outlet.
to pow er outlet
Step 5: Checking the Access Card
Satellite Receiver
1
Open the access door by applying gentle pressure to the latch and releasing.
Make sure the DIRECTV Access Card is firmly inserted into the front left hand
slot of the Satellite Receiver. After the DIRECTV Access Card is inserted
(correctly), DO NOT remove it unless instructed to do so by your service
provider.
1
Step 6: Activating Your Service
After checking to see that the DIRECTV Access Card and your Satellite Dish Antenna
is installed, you are ready to begin enjoying service.
Call DIRECTV at 1-800-DIRECTV (347-3288) to begin your service.
For DIRECTV and UltimateTV operational instructions, please refer to the User Guide.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Satellite Receiver
Advanced Connection: Connecting Your VCR
Satellite Receiver
1c
1a
If your TV and VCR have A/V jacks
1a
Connect the VIDEO OUT jacks of your Satellite
Receiver to the A/ V input jacks of your VCR
using the supplied A/ V cable. Then, connect
the A/ V output jacks of your VCR to the A/ V
input jacks of your TV using an A/ V cable. (Be
sure to match the colors on the jacks with the
colored plugs on the A/ V cable.) Some TVs
and VCRs do not have stereo audio, if yours
does not, just connect the white A/ V cable to
the Left output jack.
1b
VCR
LINE
IN
IN
OUT
S VIDEO VIDEO
AUDIO
LINE
OUT
If your TV and VCR have S-Video jacks
Use an S-Video cable instead of the yellow video connection. S-Video cable is
supplied.
1b
z Tip
To allow your Satellite Receiver to control the
recording functions of your VCR, see page 14.
If your TV and VCR do not have A/V jacks
Connect the VHF(SAT)/ UHF OUT jack on the Satellite Receiver to the VHF/ UHF input
jack on your VCR using coaxial cable.
1c
Then, connect the VHF/ UHF output jack on your VCR to the VHF/ UHF input jack on
your TV using a second coaxial cable.
Set the CH3/ CH4 switch to the channel that does not carry off-air broadcasts in your
area.
Note
With this connection, your input source
is channel 3 or channel 4 depending on
how you set the CH3/ CH4 switch on
your VCR.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Connection: Connecting Your IR
Blaster
Satellite Receiver
To allow the Satellite
1
1
Receiver to control your VCR
Connect the IR Blaster to the VCR
CONTROL jack on the Satellite
Receiver.
IR Sensor
VCR (front)
2
In front of the VCR
Place the IR Blaster under and
in front of the VCR.
2
1
"
"
to 1
/
2
The IR Blaster must extend just
in front of the infrared sensor
of the VCR.
z Tip
If the infrared sensor is not
marked on your VCR, shine a
flashlight into the front panel of
the VCR to locate the sensor.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Satellite Receiver
Advanced Connection: Connecting an Audio
System
If you have a digital or Dolby
Digital audio system
1
Audio Receiver
Connect the DIGITAL OUT (OPTICAL)
of the Satellite Receiver to the optical
digital input of your audio system.
LINE
OUT
AUDIO
LINE
IN
OPTICAL
IN
1
Satellite Receiver
z Tip
If you connect your Satellite Receiver to a Dolby
Digital receiver, set the Dolby Digital option of the
Audio display to Auto Select.
Advanced Connection: Connecting a Microphone
Satellite Receiver
GUIDE
HOME
PUSH
ELLITE RECEIVER SA -W60
T
If you have a Microphone
1
1
First, remove the cover from the
microphone jack, then connect the
microphone plug to the Satellite
Receiver’s Microphone IN jack.
z Tip
Check “Help” screen for a list of
compatible microphones.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Connection: Connecting a Printer
Connecting a printer to your Satellite Receiver enables you to print Web pages
and e-mail messages. The Satellite Receiver is not compatible with all printers.
Check the on-line instructions for a list of the latest compatible printers.
Satellite Receiver
To print screens
DB-25
Connect the printer port on
the Satellite Receiver to the
Male
port on the printer.
Note
Unplug the Satellite
Receiver and printer before
you begin connecting.
Printer
Advanced Connection: Connecting a Camcorder
Satellite Receiver
GUIDE
HOME
PUSH
SATERECSA -
T
1
If you have a Camcorder
First, remove the cover from the A/ V jacks, then, using
A/ V cables, connect the camcorder’s A/ V OUT jacks
to the Satellite Receiver’s A/ V IN jacks.
1
Note
If you have a mono camcorder, connect its left
audio output to the Satellite Receiver’s AUDIO L
(white) jack.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control and Basic
Functions
Although the Satellite Receiver’s remote control is preset to operate Sony
brand TVs, you can program the remote control to operate other
manufacturer’s TVs. This will enable you to operate your TV when
viewing regular broadcast TV using the remote control.
Batteries for the Remote Control
Insert two size AA batteries (supplied) into the remote control as shown.
Be sure to match the + and – marks on the batteries with the + and –
marks inside the battery compartment.
✍ If the remote control is not working properly, the batteries may be worn out. When
replacing batteries, replace both batteries. Do not mix different brands and types of
batteries. After you replace batteries, you may need to reprogram the remote control.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Items
In on-screen displays such as the TV Home Screen and program guide,
you must first move the highlight to the item you want, then select the
item.
R
SA
T
POWE
TV
G
MUTIN
R
SA
T
POWE
TV
G
MUTIN
TV/VIDEO
TV/VIDEO
ION
SAT
FUNCT
TV
ION
SAT
FUNCT
TV
WINDOW
PIP
WINDOW
PIP
MENU
MENU
3
2
1
3
2
1
EXIT
EXIT
6
4
5
6
4
5
T
RECEN
T
RECEN
9
7
8
9
7
8
EN
TER TV/WEB
EN
TER TV/W
.
0
.
0
OWS
H
OME
MY SH
BACK
OW
MY SH
BACK
OPTIONS
INFO
OPTIONS
INFO
GUIDE
GUIDE
CH
VOL
CH
VOL
L
SCROL
L
SCROL
CODE SET
4
RM-Y80
DE SET
4
RM-Y80
1 Press the V/ v/ B/ b buttons
to move the highlight to the
item you want.
2 Press the
button to
select the item.
z Tip
Be sure to always press the SAT
FUNCTION button before operating
the Satellite Receiver with the remote
control.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control and Basic Functions
Muting
Press to mute the sound. Press again,
or press VOL +, to restore the sound.
(For the TV only)
MUTING
POWER SAT
TV
TV/VIDEO
WINDOW
FUNCTION
PIP
TV
SAT
TV/VIDEO
Cycles through the video inputs of
your TV.
TV POWER
Turns your TV on and off.
MENU
EXIT
1
4
7
2
5
8
0
3
6
9
SAT POWER
Turns your Satellite Receiver on and
off.
RECENT
PIP
Turns the Picture-in-Picture features of
the Satellite Receiver on and off.
ENTER TV/WEB
.
MY SHOWS
BACK
HOME
WINDOW
Selects the active window while in PIP
mode, allowing you to change the
Main or PIP window.(For the
Satellite Receiver only)
INFO
OPTIONS
GUIDE
TV FUNCTION
SAT FUNCTION
Selects TV feature control.
VOL
CH
Selects Satellite Receiver feature
control.
SCROLL
Button
Button
Button
Button
Button
Button
Review button.
Play button.
CODE SET
RM-Y804
Forward scan button.
Record button.
Stop button.
Pause button.
Button
Button
Replay button.
Jump ahead button.
0 – 9 Buttons
Select channels or enter numbers in
text boxes.
.
Button
Adds period to separate major/ minor
channel numbers.
MENU
EXIT
Opens the TV Main Menu.
Closes all on-screen displays,
including program guides and menus.
ENTER
Activates the selected channel on your
TV.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONS
RECENT
Displays the OPTIONS panel.
Displays and allows you to access the
most recently viewed Web pages or
the last TV channel.
SCROLL V/v
Buttons
Moves the page up or down when the
page is too long to be displayed on the
screen.
HOME
Displays the Web Home or TV Home
screen.
BACK
Displays the last screen viewed, or
hides the on-screen keyboard.
TV/WEB
Arrow Buttons
Switches between TV and Internet
modes.
Move the yellow highlight box to a
different command or activity on the
screen; select different keys when the
on-screen keyboard is displayed.
MY SHOWS
Displays a list of programs that you
have recorded with your Satellite
Receiver.
INFO
Displays information on the program
you are viewing.
GUIDE
Displays information on available
programs, including channel, time
and date.
Button
Activates a highlighted link or
command; displays the on-screen
keyboard.
VOL +/–
CH +/–
Increases and decreases the volume.
Moves to the next or previous channel.
CODE SET
Used for programming the remote
control to operate your TV. See
page 21 for details.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control and Basic Functions
Setting up the Remote Control
MUTING
POWER SAT
TV
The remote control can be programmed to operate
most brands of televisions.
TV/VIDEO
WINDOW
FUNCTION
PIP
TV
SAT
1 Find the code(s) for the manufacturer of the TV
you want to operate with this remote control.
You can find these codes on page 22.
MENU
EXIT
1
4
7
2
5
8
0
3
6
9
2 Press the CODE SET button.
The function indicators begin flashing.
RECENT
CODE SET
ENTER TV/WEB
FUNCTION
SAT
TV
.
MY SHOWS
BACK
HOME
3 Press the 0–9 buttons to input the manufacturer
code, then press the ENTER button.
INFO
OPTIONS
GUIDE
The function indicator goes off, and the remote is
set up to operate that device.
VOL
CH
SCROLL
ENTER
1
0
1
CODE SET
RM-Y804
4 Test the remote control.
Press the POWER button for the device you want
to control, then press other operation controls
such as the CH +/ – buttons.
If the TV does not respond to the remote control,
repeat from step 2 and enter a different
manufacturer code in step 3.
z Tip
Remember to aim the remote control at
the TV you are trying to operate.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer
Portland
Code
Manufacturer Codes
103, 108
TV Codes
Quasar
110, 107
Manufacturer
Code
Radio Shack
RCA/ Proscan
102, 112, 124, 123
101
Sony
102, 103, 104,
105,106, 107, 108
Admiral (M.
Wards)
102, 114, 109
Samsung
Sanyo
Scott
126, 112, 113, 103
125
ABC
112
Bell & Howell
(M. Wards)
114, 109, 138
123, 112
Sharp
114, 113, 115
114, 109
Broksonic
Craig
103, 112
Signature 2000
(M. Wards)
122, 123, 120, 121
111
Croslex
Sylvania
Symphonic
Tenika
111, 112, 108
123, 139
Curtis Mathis
Daewoo
Daytron
Emerson
103, 119, 123
135, 136, 103
113
109
Toshiba
Videch
119, 114
122, 113, 120, 121,
123, 103, 115
131, 103, 112
113, 103, 115, 112
108, 110
Wards
Fisher
125
Zenith
General Electric
Goldstar
Hitachi
JC Penney
JVC
102, 118, 103, 107
103, 113, 112, 130
131, 113, 103, 132
103, 102, 130, 107
128, 129
KTV
133, 113, 103, 123,
134
LXI (Sears)
Magnavox
102, 103 111, 125,
119, 112
111, 112, 113, 107
Mitsubishi/ MGA 124, 103, 112
NEC
103, 112
Panasonic
Philco
Philips
Pilot
118, 116, 117, 107
111, 118, 109
111
103
Pioneer
137, 118, 119
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Front Panel Controls & Terminals
Satellite Receiver
GUIDE
HOME
PUSH
ATELE RECVER T-W6
2
1
3
4 5
6 8 7
qa
0
9
Feature
Description
Turns your Satellite Receiver on and off
1
2
Power Button
POWER
Indicates whether the Satellite Receiver is on or off.
Indicator
3
CONNECTED
Indicator
Flashes while the Satellite Receiver is connecting to the
WebTV service and while receiving new information.
Remains lit while in use.
4
5
MESSAGE
Indicator
Lights up to indicate you have an unopened e-mail
message.
MY SHOWS
Indicator
Indicates that a program is being recorded by My
Shows.
6
7
8
GUIDE Button
HOME Button
Opens the Program Guide.
Opens the TV Home screen.
Arrow and
Buttons
The arrow buttons move the highlight in the on-screen
displays. The
button selects the highlighted item.
9
0
AUDIO (R/L)/
VIDEO IN
Allows easy connection of audio/ video devices, such as
a camcorder or digital camera.
ACCESS CARD
Slot
The Access Card allows you to access DIRECTV
services.
qa MIC INPUT Jack
Allows easy connection of a microphone.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Back Panel Terminals
Satellite Receiver
7
6 5
4 0
1
3
qa 2
qs
qs
9
8
Connector
Description
1
2
TELEPHONE LINE Connects your Satellite Receiver to a telephone jack.
VCR CONTROL
PRINTER PORT
Allows you to connect your IR Blaster for easy control of
your cable box and/ or VCR through the Satellite Receiver.
3
4
Allows you to connect your Satellite Receiver to a printer.
AUDIO (R)/(L)
IN/OUT
Connects your Satellite Receiver to the right and left audio
inputs and outputs of your TV.
5
6
VIDEO IN/OUT
Connects your Satellite Receiver to your TV’s or VCR’s
video inputs and outputs.
S-VIDEO IN/OUT Allows you to connect your Satellite Receiver to your TV
and VCR for optimal picture quality (if your TV and VCR
support S-Video.
7
8
CH 3-CH 4 Switch The switch determines which TV channel allows you to
view programs from your Satellite Receiver when
connected through the VHF/ UHF connector.
VHF/UHF
IN: Allows you to connect your normal (antenna) TV or
cable TV service to your Satellite Receiver.
OUT: Allows you to send normal (antenna) TV or cable
signals to your TV or VCR from your Satellite Receiver.
9
0
AC IN
Connects your Satellite Receiver to a 120V AC outlet.
Allows you to connect an optional digital audio system.
DIGITAL AUDIO
OUTPUT
qa USB Port
Allows you to connect Universal Serial Bus components.
qs SATELLITE IN
Connect the cable from your satellite dish antenna here.
Connect a second cable if you wish to use both of the
Satellite Receiver’s tuners, this allows features such as PIP
and recording one show while viewing another.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Specifications
Terminals
Video In (2)
Video Out (2)
Audio (R/ L) In (2)
Audio (R/ L) Out (2)
S-Video In (1)/ Out (1)
Tel Line (1)
Microphone In (1)
Printer Port (DB25) (1)
VCR Control (1)
Digital Audio Out (1)
USB Port (2)
Satellite In (2)
CH3-CH4 Switch (1)
VHF/ UHF In/ Out (1)
AC In (1)
Dimensions
Weight
430 mm x 70 mm x 290 mm (w/ h/ d)
(17” x 2 3/ 4” x 11 1/2”)
4.3 kg (9.4 lbs)
AC 120V
Power
Requirements
Power
90 W max
Consumption
Supplied
Accessories
Remote Control RM-Y804 (1)
Size AA Batteries (2)
AC Power Cord (1)
A/ V (Audio/ Video) Cable (1)
Telephone Cable (1)
S-Video Cable (1)
T Splitter (1)
Coaxial Cable (1)
IR Blaster (1)
Wireless Keyboard KI-W250 (1)
Access Card (1)
Optional
Accessories
Local Antenna ANJ-AA1
Installation Kit ANJ-DS2
Amplifier EAC-DA1
Diplexer EAC-DD1
Voltage Switch EAC-DV2
Dish SAN-24MD1
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Possible Cause and remedies
TV POWER button
doesn’t turn on TV.
The remote control has not been properly programmed.
See “Setting up the Remote Control” on page 21.
The batteries in the remote control or wireless keyboard
could be weak. Check the batteries and replace them if
necessary.
No picture, no sound. Make sure the AC Power Cord is connected.
Check that the TV/ VIDEO switch is set correctly.
Make sure the Satellite Receiver is properly connected.
If you connected using a S-Video or A/ V cables, make
sure they are properly connected.
If your TV must be set to a certain channel to view other
devices to which it is connected, make sure this channel
is selected.
Check that the correct video input is selected by
pressing the TV/ VIDEO button.
If your TV is not connected using the S-Video or A/ V
cables, set the CH3-CH4 switch on the back of the
Satellite Receiver to the opposite channel to which it is
currently set.
No sound.
If you connected the Satellite Receiver using A/ V
cables, make sure the cables are properly connected.
Can’t change TV
Make sure you select the TV FUNCTION button.
channels while using
UltimateTV service.
The UltimateTV
service screens
disappear after
pressing the
Press the TV/ VIDEO button on the remote control until
the UltimateTV screen appears.
CHANNEL +/ –
buttons.
VCR Control doesn’t
seem to be working
correctly.
Check that the IR Blaster is positioned directly in front
of the infrared sensor area of your cable box and/ or
VCR.
Follow the on-line instructions in the “Settings” link,
accessible from the TV Home page of the UltimateTV
service.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Symptom
Possible Cause and remedies
The Satellite Receiver
gets extremely hot.
Check the placement of the Satellite Receiver. Place the
Satellite Receiver in a location with adequate
ventilation. Do not place the Satellite Receiver in a
cabinet or on a TV. If the heat is excessive, contact your
Sony dealer.
The Satellite Receiver
turns off and on by
itself.
This is often caused by static build up. Turn off the
Satellite Receiver and disconnect the AC Power Cord
from the power outlet. Then reconnect the AC Power
Cord to the power outlet and turn on the Satellite
Receiver. If this does not solve the problem, contact
your Sony dealer.
The Satellite Receiver
will not turn on.
Make sure the AC Power Cord is securely connected to
the Satellite Receiver and a power outlet.
The Satellite Receiver
will not connect to
the Internet after
receiving an upgrade
from the UltimateTV
service.
Turn off the Satellite Receiver and disconnect the AC
Power Cord from the power outlet. Then reconnect the
AC Power Cord to the power outlet and turn on the
Satellite Receiver. You may need to repeat this
procedure three or four times to solve the problem.
The Message
Indicator light is not
working.
You can set your Satellite Receiver to check for
messages automatically. However, if you check for
messages yourself before the Satellite Receiver is set to
do so automatically, the Message Indicator may not
light until the Satellite Receiver checks again. You may
want to consider setting the Satellite Receiver to check
for mail when you usually are not connected.
Remote control or
keyboard is no longer
working.
Replace the batteries.
Try pressing the SAT FUNCTION button.
No channels are
viewable.
Activate your service by contacting DIRECTV at
1-800-DIRECTV (347-3288)
Check the status of your service with UltimateTV at
1-877-ULTIMATE (858-4628)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
wasted programming charges due to
product malfunction. This warranty does
not cover damage due to improper
operation or maintenance, connection to
improper voltage supply, or attempted
repair by anyone other than a facility
authorized by SONY to service the Product.
This warranty does not cover Products sold
AS IS or WITH ALL FAULTS. This
warranty is valid only in the United States.
Proof of purchase in the form of a bill of sale
or receipted invoice which is evidence that
the Product is within the Warranty period
must be presented to obtain warranty
service.
Limited Warranty
Satellite Receiver
SONY ELECTRONICS INC. (“SONY”)
warrants this Product against defects in
material or workmanship as follows:
1. Labor: For a period of 90 days from the
original date of purchase, if the Product
is determined to be defective, SONY
will repair or replace the Product at no
charge. After this 90 day period, you
must pay for all labor charges.
2. Parts: For a period of one year from the
original date of purchase, SONY will
supply, at no charge, new or rebuilt
replacements in exchange for defective
parts. Any replacements will be
REPAIR OR REPLACEMENT AS
PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. SONY
SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT. IN NO EVENT
SHALL SONY BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL
DAMAGES WHATSOEVER ARISING
OUT OF THE USE OR INABILITY TO
USE THE PRODUCT. UNDER NO
CIRCUMSTANCES SHALL SONY’s
LIABILITY, IF ANY, EXCEED THE
PURCHASE PRICE PAID FOR THE
PRODUCT. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON
THIS PRODUCT IS LIMITED IN
warranted for the longer of the
remainder of the original warranty
period or 90 days from the parts
installation by a SONY authorized
DIRECTV System installer or facility.
To obtain warranty service:
– If the Product was installed by a SONY
authorized DIRECTV System installer,
contact that installer for instructions.
– If the Product was not installed by a
SONY authorized DIRECTV System
installer, you must take the Product or
deliver the Product in either its original
packaging or packaging affording an equal
degree of protection (with freight prepaid),
to a SONY authorized DIRECTV System
service facility. To locate the closest such
facility, please call the telephone number
listed below.
DURATION TO THE DURATION OF
THIS WARRANTY.
This warranty does not cover customer
instruction, installation, set up adjustments
or signal reception problems. This warranty
does not cover cosmetic damage or damage
due to acts of God, accident, misuse, abuse,
negligence, commercial use, or
modification of, or to any part of the
Product. This warranty does not cover
improper installation (if not installed by a
SONY authorized DIRECTV System
installer), loss of use of the product, or
This warranty is invalid if the factory
applied serial number has been altered or
removed from the Product. Some states do
not allow the exclusion or limitation of
incidental or consequential damages, or
allow limitations on how long an implied
warranty lasts, so the above limitations or
exclusions may not apply to you. In
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
addition, if you enter into a service contract
with the SONY Partnership within 90 days
of the date of sale, the limitation on how long
an implied warranty lasts does not apply to
you. This warranty gives you specific legal
rights, and you may have other rights which
vary from state to state.
About Sony Customer Support
Every DIRECTV System manufactured by
Sony comes with Sony’s Express Support at
no charge to you. In the event of a system
failure, our Express Support Program can
have a replacement Satellite Receiver on its
way to you via overnight Federal Express
(for calls Monday-Friday until 7:30 pm
Eastern Time; Saturday delivery depends
upon zip code). All it takes is a valid credit
card to cover a security deposit, and Sony
will pay freight in both directions. Our
Express Support continues with our 800
number, staffed by dedicated technical
representatives who can answer questions on
dealer locations, system operation,
For your convenience, SONY ELECTRONICS
INC. has established telephone numbers for
frequently asked questions:
For assistance with installation, contact the
dealer from whom you purchased your
Multi-Sat Oval Antenna System.
For product information or operation, for
service assistance or for resolution of a
service problem, call:
installation, hookup, accessories, and how to
get the most out of your home entertainment
system. Sony’s ExpressSupportSM program:
another expression of our commitment to
excellence in customer service.
SONY SATELLITE SYSTEM
INFORMATION CENTER
1-800-838-SONY (7669)
For an accessory or part not available from
your authorized dealer, call:
1-800-488-SONY (7669)
✍ Should you have any other problems with your Satellite Receiver, please call one of the
following numbers:
• For service problems call: 1-877-ULTIMATE (858-4628)
• To begin service call: 1-800-DIRECTV (347-3288)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Interference Information
FCC Regulations and
Information
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference with
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
interference to radio or television reception (which
you can determine by turning the equipment off
and on), you are encouraged to try to correct the
interference by one or more of the following
measures:
FCC Registration Information
Your Satellite Receiver has been registered by the
Federal Communication Commission (FCC) as not
being harmful to the telephone network when
connected directly to the telephone lines. In order
to fully comply with the Rules of the FCC, the
following instructions should be read carefully and
followed completely where applicable:
FCC has established Rules which permit this
device to be directly connected to the telephone
network. Standardized jacks are used for these
connections. This equipment should not be used on
party lines or coin phones.
Change the position of the Satellite Receiver with
respect to the radio or television equipment that is
receiving the interference.
If this device is malfunctioning, it may also be
causing harm to the telephone network; this device
should be disconnected until the source of the
problem can be determined and until the repair has
been made. If this is not done, the telephone
company may temporarily disconnect service.
Move the Satellite Receiver away from the
equipment that is receiving the interference.
Plug the Satellite Receiver into a different outlet so
that the Satellite Receiver and the equipment
receiving the interference are on different branch
circuits.
The telephone company may make changes in its
technical operations and procedures; if such
changes affect the compatibility or use of this
device, the telephone company is required to give
adequate notice of the changes. You will be advised
of your right to file a complaint with the FCC.
Shielded cables and I/ O cords must be used for
this equipment to comply with the relevant FCC
regulations. Changes or modifications not
expressly approved in writing by Sony Electronics,
Inc., void the user’s authority to operate this
equipment.
If the telephone company requests information on
what equipment is connected to their lines, inform
them of:
If these measures do not eliminate the interference,
you should consult your Satellite Receiver dealer or
an experienced radio/ television technician for
additional suggestions. In addition, you may find
the following booklet prepared by the FCC helpful:
“How to Identify and Resolve Radio-TV
Interference Problems.” This booklet is available
from the U.S. Government Printing Office,
Washington, D.C., 20402
a. The telephone number to which this unit is
connected.
b. The ringer equivalence number.
c. The USOC jack required.
d. The FCC Registration Number.
Items (b) and (d) are indicated on the label. The
Ringer Equivalence Number (REN) is used to
determine how many devices can be connected to
your telephone line. In most areas, the sum of the
REN’s of all devices on any one line should not
exceed five (5). If too many devices are attached,
they may not ring properly.
Stock No. 004-000-00345-4.
Service Requirements
In the event of equipment malfunction, all repairs
should be performed by our Company or an
authorized agent. It is the responsibility of users
requiring service to report the need for service to
our company or to one of our authorized agents.
For service, call 1-888-772-7669.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Sony with your questions and comments
Printed in the U.S.A.
Sony Electronics Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|