CX68N5_FC_EN
FLE (Malaysia) Sdn. Bhd.
COLOUR TELEVISION
MODEL
CX68N5
OPERATION MANUAL
POWER
E
ON TIME
R
SAV
Please read this operation manual
carefully before using the colour
television.
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_01-05_EN
FLE (Malaysia) Sdn. Bhd.
Dear SHARP Customer
Thank you for buying SHARP's Colour
Television. We hope you will have many
years of enjoyment from this television
set. To ensure proper operation, please
read this manual carefully, and keep it in
a safe place for future reference.
Accessories
The following accessories are included with this television.
Remote control
Size-AA batteries
Operation manual
E 2
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_01-05_EN
FLE (Malaysia) Sdn. Bhd.
Easy setup
To use your TV set, perform the easy setup procedure below.
The
mark indicates the page numbers with more detailed information.
Connect the antenna.
25
• See
to connect the antenna.
Connect any video equipment.
25
26
to connect video equipment.
• See
,
• See the operation manual of your video equipment when
connecting to the TV set.
Insert the batteries into the remote control.
• Use the two batteries included with the TV.
5
• See
.
Insert the AC plug to the power outlet.
• If you will not use the TV set for a considerable length of time,
as a safety precaution, unplug the cord from the outlet.
Tune the channels.
• Use the buttons on the TV.
13
14
• See
,
.
E 3
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_01-05_EN
FLE (Malaysia) Sdn. Bhd.
Safety precautions
Damage
Water
Turn off the power and
unplug the power cord
from the wall outlet
immediately if the TV
set begins to make any
unusual noises or gives
off smoke or an unusual
smell. Then call your
dealer for service.
To prevent fire or
electrical shock, do not
place the TV set near a
bath, swimming pool or
other area where it may
become wet.
Moisture
Servicing
To prevent electrical
shock, do not use the TV
set in an excessively
damp place.
To reduce the risk of
electric shock, do not
remove the back of the
cabinet. This TV set
contains dangerous
voltage.
Power-cord protection
Unstable surface and shocks
To prevent electrical
Do not place this TV set
on an unstable cart,
shock, do not subject the
AC power cord to damage
by bending or twisting it,
or by placing heavy items
on top of it and do not
place the AC power cord
under the TV set. If the AC
power cord becomes
damaged, unplug it from
the wall outlet immediately
and call your dealer for
service.
stand, shelf, or table. The
TV set may fall, causing
serious injury to a child
or adult, and serious
damage to the set.
Sharp recommends
securing the TV set to a
stable surface or wall to
prevent the set from
falling due to sudden
shocks or impact.
Liquid entry
Ventilation
Do not place a flower
vase or anything else
containing liquid on the
TV set, as liquid spilt on
the TV set can cause
electrical shock or
failure.
Do not place this TV set
in a confined area, such
as on a bookshelf or in a
built-in case. Leave
adequate space behind
the TV for proper
ventilation.
Object entry
TV Set position
Never insert or drop any
metallic or inflammable
objects into the
ventilation openings of
the TV set, as this can
cause fire, electrical
shock, or electrical
failure.
Do place the TV set onto
an even stand, table or
track which size is bigger
than the TV set.
If the TV set is put onto a
smaller size or uneven
stand, table or track may
cause the TV cabinet distort.
Do not put or insert anything
between TV set and the
stand, table or track.
E 4
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_01-05_EN
FLE (Malaysia) Sdn. Bhd.
Part names
The
mark indicates the page numbers with more detailed information.
Infrared transmitter window
Aim this window at the infrared
sensor window on your TV set.
Remote control
TV/VIDEO
10
7
Switches between TV broadcasts
and A/V input programmes.
Turns the TV on or to
Standby mode.
TV/VIDEO
10
7
1
4
7
2
5
8
0
3
6
9
Number buttons
7
7
Returns to previously viewed
channel.
/
Switches between one- or two-digit
mode channel selection.
Adjusts the volume.
Used for MENU setup.
CH
CH
CH
CH
7
/
9
Selects the channel.
Used for MENU setup.
Mutes the sound and restores
sound to previous level.
MENU
MENU
11
16
AV MODE NORMAL
AV MODE
9
Calls the MENU screen.
Changes Picture and Sound setting.
STANDARD, SOFT, DYNAMIC
POWER
SAVE
NORMAL
Resets all settings.
POWER SAVE
19
9
Displays the channel and timer
settings on the screen.
TV
Installing batteries in the remote control unit
With your thumbnail, pull
up at the slit to open the
battery cover.
Insert two batteries
(size AA).
Replace the battery cover.
• Be sure to match the battery j/k terminals with the j/k marks inside the compartment.
• Remove the batteries if weak or if the unit is not in use for long periods.
• Do not mix old and new batteries.
• Incorrect installation of the batteries may damage the remote control.
E 5
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_06-10_EN
FLE (Malaysia) Sdn. Bhd.
TV set
TV front
POWER
ON TIMER SAVE
POWER
ON TIMER
SAVE
7
Power switch
Turns on and off
the main power.
Power indicator
Power can be turned on
by the remote control
7
when the indicator is red.
On timer indicator
22
Power save indicator
19
Infrared sensor window
Receives the infrared wave
from the remote control.
5
Behind the door
VIDEO
(MONO) L-AUDIO-R
PRESET
/MENU
CH
AV-3 IN
PRESET/MENU
11
Audio input
27
terminals (AV-3)
Connects to a camcorder,
video game, etc.
PRESET/MENU button
Tunes the channels.
Used for MENU setup.
7
/
27
Video input terminal (AV-3)
Connects to a camcorder,
video game, etc.
Volume up/down button
Adjusts the volume.
Makes adjustments in PRESET.
CH
CH
7
/
Channel up/down button
Selects the channels.
8
Headphone jack
Use to listen to the
audio with headphone.
Tunes or sets the channels.
• When using headphone, see
.
8
E 6
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_06-10_EN
FLE (Malaysia) Sdn. Bhd.
Watching TV
Watching a TV programme
Simple operations for watching a TV programme
TV Set
POWER
SAVE
ON TIMER
1
2
Turn on power.
• When the power indicator is off, press
• When the power indicator is red, press
.
on the remote
control. The power indicator changes to green and a picture appears.
Power indicator
Select channel.
Behind the door
CH
CH
With
/
CH
• Press
and channels change as shown below.
1 / 2 / ... / 98 / 99 /AV1 (or SAV1) /AV2 (or COMPONENT)
/AV3 / 0 / 1 / 2 ...
PRESET
CH
/MENU
CH
• Press
and channels change as shown below.
1 / 0 / AV3 /AV2 (or COMPONENT) /AV1 (or SAV1) / 99 /
CH
CH
98 / ... / 2 / 1 / 0 ...
With the number buttons (on remote control)
5
• To select a one-digit channel, such as 5, press
.
If “5-” is indicated, press
to select one-digit input, and then
5
press
again.
TV/VIDEO
• To select a two-digit channel, such as 15, press
to select
.
1
5
the two-digit input. Press
, and then press
1
4
7
2
5
8
0
3
6
9
1
5
--
1-
15
PAL
CH
CH
CH
CH
MENU
3
Adjust volume using
.
/
AV MODE NORMAL
POWER
SAVE
• The number of oval blocks “ ”
indicates the volume level. The
volume bar disappears
approximately three seconds after
the volume has been adjusted.
VOLUME
10
TV
CH
CH
• When the power indicator is red, either
/
on the TV can be pressed to turn on the
power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the power indicator is red, the TV is in Standby mode and power is still supplied to the TV. If you
will not watch TV for a while, turn off the main power by pressing
on the TV set. Also, if you will
not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 (or SAV1), AV2 (or COMPONENT) and AV3 input channels cannot be selected using
CH
/
CH
TV/VIDEO
on the remote control. Use
• Channels that have been skipped cannot be selected. See
• The on-screen displays in this manual may differ from their actual appearance.
to select these channel.
15
.
E 7
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_06-10_EN
FLE (Malaysia) Sdn. Bhd.
Operating the TV buttons
Simple operation of the TV set
Behind the door
Using
Press
/
to increase volume.
to decrease volume.
Press
PRESET
/MENU
CH
VOLUME
15
CH
CH
CH
CH
Using
/
5
PAL
CH
CH
Press
to increase channel
number.
Press
to decrease channel
number.
Behind the door
Using headphone
Insert headphone plug into headphone jack to listen to audio with
headphone.
VIDEO
(MONO) L-AUDIO-R
• The audio from the speakers is turned off.
AV-3 IN
• Select an appropriate volume so as not to injure your hearing.
• To avoid injuring your hearing, do not put on the headphone before plugging them into the headphone
jack and before the power is turned on.
• The proper impedance for the headphone is 32 ohms.
• Remove the headphone plug from the jack when not using the headphone.
E 8
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_06-10_EN
FLE (Malaysia) Sdn. Bhd.
Useful features
Channel/Timer display
Displays the current channel number, the timer, and other
settings on the screen.
1
Press
.
TV/VIDEO
• The time remaining on the Off timer,
On timer, and Reminder appears on
the screen.
1
4
7
2
5
8
0
3
6
9
• When no Timer is set, the channel
number and colour system appear
on the screen. Press again to clear
these current settings display on the
screen.
OFF
ON
2:30
8:00
1:50
CH
CH
MENU
2
3
Press
again.
5
NORMAL
AV MODE
AV MODE NORMAL
PAL
• The channel number and colour
system appear on the screen.
POWER
SAVE
Press
once again.
TV
• The display disappears.
Mute
Silences the sound.
1
Press
.
• “ ” appears on the screen, and the
sound is silenced.
2
Press
again.
• The volume returns to its previous level.
AV Mode
AV MODE
Each time you press the
(STANDARD)
button, the mode switches between
STANDARD, SOFT and DYNAMIC.
(SOFT)
STANDARD: Normal mode
SOFT: Soft mode
(DYNAMIC)
DYNAMIC: Dynamic mode
NORMAL
• To return to the original setting (factory setting), press the
16 17
. For adjusting the Picture and Sound
modes, please see
and
.
• Mute will be cancelled if the
is pressed at anytime.
E 9
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_06-10_EN
FLE (Malaysia) Sdn. Bhd.
Channel recall
Switches back to the channel you were watching just before
the current channel.
Press
.
5
TV/VIDEO
PAL
• The channel previously viewed returns to
TV/VIDEO
the screen.
1
4
7
2
5
8
0
3
6
9
7
Example:
PAL
After switching from channel 5 to channel
5
7,
is pressed, the channel will
PAL
change to channel 5. Press
again to return to channel 7.
CH
CH
7
PAL
MENU
AV MODE NORMAL
POWER
SAVE
TV/Video selection
Switches between TV broadcasts and AV input programmes.
TV
TV/VIDEO
Each time you press the
,
SAV1 or AV1
the input switches between AV1 (or
SAV1), AV2 (or COMPONENT), AV3
and TV programme.
COMPONENT or AV2
AV3
25
PAL
E 10
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_11-15_EN
FLE (Malaysia) Sdn. Bhd.
Selecting menu items
This TV set allows you to adjust the picture and sound, and set the channels and other features
using the On-screen display with the remote control or from the TV set. Select the desired menu
item by following the steps below and then refer to the indicated page for details.
Remote control
Selecting a menu item
0
CH
CH
MENU
MENU
PRESET/MENU
1
2
Press
/
to
CH
CH
PICTURE
SOUND
call MENU screen.
MENU
FEATURE
TIMER
AV MODE NORMAL
CH-SETTING
POWER
SAVE
MENU
CH
CH
Press
/
or
MENU
/
to select
CH
CH
PICTURE
SOUND
desired menu item.
FEATURE
TIMER
• The selected item is highlighted in
yellow.
Behind the door
CH-SETTING
3
Press
enter.
/
to
SOUND
(STANDARD)
SURROUND
TREBLE
BASS
ON
PRESET
CH
/MENU
+10
• The corresponding menu screen will
appear.
-
20
20
BALANCE
PRESET/MENU
CH
17
16
PICTURE menu
SOUND menu
CH
PICTURE
(STANDARD)
SOUND
(STANDARD)
10
0
ON
CONTRAST
COLOUR
SURROUND
TREBLE
BASS
+10
BRIGHTNESS
TINT
+10
-
20
20
BALANCE
SHARPNESS
PICTURE NR
WHITE TEMP
CH SELECT
-
10
ON
20
CH SELECT
ADJUST MENU RETURN
ADJUST MENU RETURN
MENU
18
–
20
TIMER menu
21
–
23
FEATURE menu
PICTURE
SOUND
FEATURE
TIMER
FEATURE
TIMER
ON
ON
ON
--:--
--:--
CH-SETTING
BLUE BACK
SAVE
OFF
ON
VM
POSITION
VOLUME
CH SELECT
ENTER
--:--
MENU RETURN
CH SELECT
CH SELECT
ADJUST MENU RETURN
ADJUST MENU RETURN
POWER
ON TIMER
SAVE
CH-SETTING menu
15
CH-SETTING
Operating guide
CH27
POSITION
COLOUR
SKIP
AUTO
OFF
FINE
168.25MHZ
CH SELECT
ADJUST MENU RETURN
PRESET/MENU
• If you press
on TV set for more than two seconds, the LANGUAGE mode screen will appear instead of
PRESET/MENU
the MENU screen. To display the MENU screen, press
button again.
until the normal screen appears, then press the
• The procedures for setting and selecting the menu items on the following pages are described using the buttons
on the remote control. These procedures can also be performed using the corresponding buttons on theTV set.
E 11
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_11-15_EN
FLE (Malaysia) Sdn. Bhd.
Settings and adjustments
On-screen display language selection
The on-screen display language can be set to English,
Chinese, French, Russian, Malay or Arabic.
Behind the door
TV set
ENGLISH
FRANCAIS
BAHASA MELAYU
PRESET/MENU
1
2
Press
for more than
PRESET
/MENU
two seconds.
CH
CH
CH
CH
CH
Press
/
to
PRESET/MENU
select desired language.
PRESET/MENU
• Pressing
changes the
screen as shown below.
Language
AUTO
MANUAL
Normal screen
PRESET/MENU
until normal
3
Press
screen appears.
E 12
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_11-15_EN
FLE (Malaysia) Sdn. Bhd.
Settings and adjustments
Manual channel tuning
Enables manual channel tuning to a desired TV station. (e.g.
tuning the TV to a VCR, tuning in an additional TV station.)
NOTE: This TV is already tuned into 2, 7, 9, 10 and 28.
ENGLISH
PRESET/MENU
for more than
1
2
Press
TV/VIDEO
FRANCAIS
two seconds. The language
select mode appears.
BAHASA MELAYU
1
4
7
2
5
8
0
3
6
9
Number
buttons
CH
CH
MENU
MANUAL(B/G)
MENU
PRESET/MENU
Press
twice to display
VHF
1
z
48.25MH
CH
CH
MANUAL mode screen.
AV MODE NORMAL
PRESET/MENU
POWER
SAVE
• Pressing
changes the
screen as shown below.
Language
AUTO
MANUAL
TV
Normal screen
MANUAL(B/G)
CH
CH
3
4
Press
/
or
or number
VHF
107.50MH
5
z
/
CH
CH
buttons to select channel
position.
Behind the door
Press
/
on TV
set to locate channel you wish to
preset to current channel
position.
PRESET
CH
Channel position
/MENU
• Search is initiated and when a TV
signal is received during the search,
the search stops.
PRESET/MENU
CH
CH
5
6
Repeat steps 3 and 4 above, to preset channel positions for
other broadcasts.
PRESET/MENU
Press
again to display normal screen.
E 13
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_11-15_EN
FLE (Malaysia) Sdn. Bhd.
Auto channel tuning
Automatically tunes in and presets receivable TV stations,
using consecutive channels numbers (e.g. 2, 7, 9, 10 will be
stored as 1, 2, 3, 4).
Behind the door
ENGLISH
PRESET/MENU
for more than
1
2
Press
FRANCAIS
two seconds. The language
select mode appears.
BAHASA MELAYU
PRESET
/MENU
CH
PRESET/MENU
AUTO(B/G)
PRESET/MENU
Press
again to display
VHF
1
z
48.25MH
AUTO mode screen.
PRESET/MENU
• Pressing
changes the
screen as shown below.
Language
AUTO
MANUAL
Normal screen
3
Press
set.
/
on TV
1
PAL
• All the TV stations in your area that
can be received by the TV set are
automatically preset between
channels 1 to 99.
• The screen shows whatever is on
channel 1 when auto channel preset
is finished.
• AUTO PRESET stores all receivable channels including those which may be very weak and not clearly
visible. To preset only those channels designated for the local viewing region, use MANUAL PRESET.
13
See
.
• Unused channels are automatically skipped.
E 14
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_11-15_EN
FLE (Malaysia) Sdn. Bhd.
Settings and adjustments
Channel setting
Enables individual channel setting.
MENU
MENU
1
2
Press
to call MENU
TV/VIDEO
PICTURE
screen.
SOUND
FEATURE
TIMER
1
4
7
2
5
8
0
3
6
9
CH
CH
Press
/
to
CH-SETTING
select “CH-SETTING”.
CH
CH
CH-SETTING
3
4
5
Press
/
to
to
CH
CH
CH27
AUTO
POSITION
COLOUR
SKIP
display CH-SETTING menu.
MENU
OFF
CH
CH
FINE
168.25MHZ
Press
/
AV MODE NORMAL
select desired setting.
POWER
SAVE
MENU
CH SELECT
Each time you press
/
ADJUST MENU RETURN
, setting for individual
items changes as follows:
• POSITION
TV
The channel position changes to the higher or lower number.
• COLOUR
AUTO
PAL
• SKIP
ON
OFF
Channel numbers with a “ ” mark on the left are set to SKIP. To turn
off SKIP, press the number buttons to select the desired channel and
then set “SKIP” to “OFF”.
• FINE
The frequency changes to allow fine tuning.
CH-SETTING
MENU
6
Press
until normal
AV1
AUTO
POSITION
COLOUR
screen appears.
• When you select AV1, AV2 or AV3
for the channel position, the CH-
SETTING menu changes as shown
on the right and the colour mode
changes in the following order:
CH SELECT
ADJUST MENU RETURN
AUTO
PAL
N443
N358
• Switching COLOUR system:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the receiving signal
system and changes the reception system of the TV set. When the picture is not stable, switching to an
appropriate system may improve the picture quality.
• In a weak reception area, or under bad reception conditions, you can change the frequency for fine tuning.
• When using FINE, the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel tuning procedure. See
13
.
E 15
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_16-22_EN
FLE (Malaysia) Sdn. Bhd.
Picture adjustment
MENU
MENU
1
2
Press
to call MENU
TV/VIDEO
PICTURE
SOUND
screen.
FEATURE
TIMER
1
4
7
2
5
8
0
3
6
CH
CH
Press
/
to
CH-SETTING
select “PICTURE”.
CH
9
CH
PICTURE
(STANDARD)
3
4
Press
/
to
to
CH
CH
50
0
+10
CONTRAST
COLOUR
display PICTURE menu.
BRIGHTNESS
TINT
MENU
CH
CH
Press
/
MENU
SHARPNESS
PICTURE NR
WHITE TEMP
-
10
ON
20
AV MODE NORMAL
select adjustment items.
POWER
SAVE
NORMAL
(STANDARD)
5
Adjust using
/
.
• Wait for approximately three seconds
TV
to return to PICTURE menu.
CONTRAST
-
50
+
6
7
Repeat steps 4 and 5 above to adjust other items.
MENU
Press
until normal screen appears.
NORMAL
• When
is pressed while the PICTURE menu is displayed, the setting
for the selected item is reset to the standard (factory setting) position.
NORMAL
• When
is pressed while the MENU screen is displayed and
“PICTURE” is selected, all the settings for the PICTURE items are reset to
the standard (factory setting) position.
The following table lists the adjustment items shown in the PICTURE menu and how they change as you
press
/
.
Selected item
CONTRAST
Press
Press
To decrease
contrast
For less colour
intensity
For less
brightness
To increase
contrast
For more colour
intensity
For more
brightness
-
-
-
+
+
+
COLOUR
BRIGHTNESS
TINT -1
To move tint toward
purple
To move tint toward
green
SHARPNESS
For less
sharpness
For more
sharpness
-
+
PICTURE NR -2
WHITE TEMP
(See note below)
ON
OFF
To more reddish
background
To more bluish
background
*-1: TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)
*-2: Picture Noise Reduction
Noise might be generated on images when playing deteriorated video tapes or when receiving broadcasts with relatively
weak signals. In these cases, set PICTURE NR to “ON” to reduce the noise. However, when receiving good images
without noise, you can get better image quality by turning OFF this feature.
E 16
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_16-22_EN
FLE (Malaysia) Sdn. Bhd.
Settings and adjustments
Sound adjustment
MENU
MENU
1
Press
to call MENU
TV/VIDEO
PICTURE
SOUND
screen.
FEATURE
TIMER
1
4
7
2
5
8
0
3
6
9
CH
CH
2
Press
/
to
CH-SETTING
select “SOUND”.
CH
CH
SOUND
(STANDARD)
3
4
Press
/
to
to
CH
CH
SURROUND
TREBLE
BASS
ON
display SOUND menu.
+10
MENU
-
20
20
BALANCE
MENU
CH
CH
Press
/
AV MODE NORMAL
select adjustment items.
POWER
SAVE
NORMAL
(STANDARD)
5
Adjust using
• Wait for approximately three
seconds to return to SOUND menu.
/
.
TV
TREBLE
-
+10
+
6
7
Repeat steps 4 and 5 above to adjust other items.
MENU
Press
until normal screen appears.
NORMAL
• When
is pressed while the SOUND menu is displayed, the setting
for the selected item is reset to the standard (factory setting) position.
NORMAL
• When
is pressed while the MENU screen is displayed and
“SOUND” is selected, all the settings for the SOUND items are reset to the
standard (factory setting) position.
The following table lists the adjustment items shown in the SOUND menu and how they change as you
press
/
.
Selected item
SURROUND
Press
Press
The surround effect is
ON
The surround effect is
OFF
ON
OFF
TREBLE
BASS
To decrease treble
To decrease bass
To increase treble
To increase bass
-
-
+
+
BALANCE
To shift balance
toward left
To shift balance
toward right
E 17
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_16-22_EN
FLE (Malaysia) Sdn. Bhd.
Blue screen
Automatically turns the screen blue if a broadcast signal is
not received.
MENU
MENU
1
2
Press
to call MENU
TV/VIDEO
PICTURE
SOUND
screen.
FEATURE
TIMER
1
4
7
2
5
8
0
3
6
9
CH
CH
Press
/
to
CH-SETTING
select “FEATURE ”.
CH SELECT
ENTER
MENU RETURN
CH
CH
CH
CH
FEATURE
MENU
3
4
5
Press
/
to
to
to
ON
ON
ON
BLUE BACK
SAVE
display FEATURE menu.
AV MODE NORMAL
VM
POWER
SAVE
MENU
CH
CH
Press
/
select “BLUE BACK”.
CH SELECT
Press
/
ADJUST MENU RETURN
TV
select “ON” or “OFF”.
MENU
6
Press
until normal screen appears.
When BLUE BACK is set to “ON”
No signal
Blue screen
TV off
(Indicator)
after five seconds
after 15 minutes
Standby mode
Power indicator
lights up red
• Poor reception due to weak signals and too much noise may activate BLUE BACK, despite the presence
of a broadcast signal. To continue watching TV under these conditions, switch “BLUE BACK” to “OFF”.
• When Off timer is set, the OFF TIMER setting has priority over BLUE BACK.
E 18
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_16-22_EN
FLE (Malaysia) Sdn. Bhd.
Settings and adjustments
Save
This function reduces the picture brightness to create a
softer image while saving electricity.
Using Menu
TV/VIDEO
MENU
MENU
1
2
Press
to call MENU
1
4
7
2
5
8
0
3
6
9
PICTURE
screen.
SOUND
FEATURE
TIMER
CH
CH
Press
/
to
CH-SETTING
select “FEATURE”.
CH
CH
CH
CH
CH SELECT
ENTER
MENU RETURN
MENU
AV MODE NORMAL
FEATURE
3
4
5
Press
/
to
to
to
POWER
SAVE
MENU
ON
ON
ON
BLUE BACK
SAVE
display FEATURE menu.
VM
CH
CH
POWER SAVE
Press
/
select “SAVE”.
TV
CH SELECT
Press
/
ADJUST MENU RETURN
select “ON” or “OFF”.
• When SAVE is set “ON”, the
POWER SAVE indicator on the TV
set lights up in red.
• When SAVE is set “OFF”, the
POWER SAVE indicator on the TV
set is turn off.
MENU
6
Press
until normal
screen appears.
TV Set
Using Remote Control
POWER
SAVE
ON TIMER
POWER SAVE
1
2
Press
to display the
SAVE
SAVE mode screen.
ON
POWER SAVE
Each time you press
,
POWER SAVE
indicator (Red)
the mode switches between
“ON” and “OFF”.
• When SAVE is set “ON”, the
SAVE
OFF
POWER SAVE indicator on the TV
set lights up in red.
• When SAVE is set “OFF”, the
POWER SAVE indicator on the TV
set is turn off.
3
Press
to turn off the SAVE mode screen.
E 19
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_16-22_EN
FLE (Malaysia) Sdn. Bhd.
VM (Velocity Modulation)
This function emphasizes the picture outline.
MENU
MENU
1
2
Press
to call MENU
TV/VIDEO
PICTURE
SOUND
screen.
FEATURE
TIMER
1
4
7
2
5
8
0
3
6
9
CH
CH
Press
/
to
CH-SETTING
select “FEATURE”.
CH SELECT
ENTER
MENU RETURN
CH
CH
CH
CH
FEATURE
MENU
3
4
5
Press
/
to
to
to
ON
ON
ON
BLUE BACK
SAVE
display FEATURE menu.
AV MODE NORMAL
VM
POWER
SAVE
MENU
CH
CH
Press
/
select “VM”.
CH SELECT
Press
/
ADJUST MENU RETURN
TV
select “ON” or “OFF”.
MENU
6
Press
until normal
screen appears.
• If a picture is received with noise, ensure that the VM is set to “OFF”.
E 20
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_16-22_EN
FLE (Malaysia) Sdn. Bhd.
Settings and adjustments
Off timer
Automatically turns power off after a set length of time has
passed.
MENU
MENU
1
2
Press
to call MENU
TV/VIDEO
PICTURE
screen.
SOUND
FEATURE
TIMER
1
4
7
2
5
8
0
3
6
9
CH
CH
Press
/
to
CH-SETTING
select “TIMER”.
TIMER
CH
CH
3
4
Press
/
to
to
CH
CH
--:--
--:--
OFF
ON
display TIMER menu.
POSITION
VOLUME
MENU
CH
CH
Press
/
--:--
AV MODE NORMAL
select “OFF ”.
POWER
SAVE
MENU
CH SELECT
ADJUST MENU RETURN
NORMAL
TV
TIMER
5
6
Press
/
to
2:30
OFF
ON
set time for TV to turn off.
--:--
POSITION
• Maximum time that can be preset
is 12 hours and 50 minutes.
VOLUME
--:--
• As soon as the time is entered,
the timer starts to count down.
CH SELECT
ADJUST MENU RETURN
MENU
Press
until normal
screen appears.
OFF
0:05
0:04
• Five minutes before the preset
length of time expires (in the
example, after two hours and 25
minutes), the remaining time
appears on the screen.
OFF
OFF
0:03
• A flashing display of the remaining
time appears during the last few
seconds.
OFF
0:02
• When the preset length of time
has passed, the TV set enters the
Standby mode.
OFF
0:01
OFF
0:00
Flashing
NORMAL
• To cancel the timer setting, press
the timer to “- - : - -”.
when “ ” is displayed on the left of “OFF ” so as to set
• The timer can be set in ten-minute intervals.
• The Off timer is cancelled if the power is turned off or set to the Standby mode using
on the TV set, or if the power is otherwise interrupted.
or
E 21
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_16-22_EN
FLE (Malaysia) Sdn. Bhd.
On timer
Automatically turns power on after a set length of time has
passed.
MENU
MENU
1
2
Press
to call MENU
TV/VIDEO
PICTURE
screen.
SOUND
FEATURE
TIMER
1
4
7
2
5
8
0
3
6
CH
CH
Press
/
to
CH-SETTING
select “TIMER”.
9
CH
TIMER
CH
3
4
5
Press
/
to
to
to
CH
CH
--:--
--:--
OFF
ON
display TIMER menu.
POSITION
VOLUME
MENU
CH
CH
Press
/
--:--
AV MODE NORMAL
MENU
select “ON ”.
POWER
SAVE
NORMAL
Press
/
TIMER
set time for TV to turn on.
--:--
8:00
--
OFF
• Maximum time that can be preset
is 12 hours and 50 minutes.
ON
TV
POSITION
VOLUME
--
• As soon as the time is entered,
the timer starts to count down.
--:--
TIMER
CH
CH
6
7
Press
/
to
to
--:--
8:00
CH28
--
OFF
ON
select “POSITION”.
POSITION
VOLUME
Press
/
--:--
set the channel.
TIMER
CH
CH
8
9
Press
/
to
--:--
8:00
CH28
20
OFF
ON
select “VOLUME”.
POSITION
VOLUME
Press
/
to
--:--
TV Set
set volume.
CH SELECT
10 Press
to put TV set
into Standby mode.
• The On timer indicator lights up Red.
ADJUST MENU RETURN
POWER
SAVE
ON TIMER
• When the preset length of time (in the above example, eight hours)
has passed, the power turns on and a picture appears on the screen.
The On timer speaker volume gradually increases from zero to the
preset volume.
On timer indicator
(Red)
NORMAL
• To cancel the timer setting, press
timer to “- - : - -”.
when “ ” is displayed on the left of “ON ” so as to set the
• The timer can be set in ten-minute intervals.
• The On timer is cancelled if the power is turned off using
.
• If the TV set is turned on by the On timer, then the TV set will be automatically turned off in two hours if
no buttons are pressed on the TV set or remote control.
E 22
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_23-26_EN
FLE (Malaysia) Sdn. Bhd.
Settings and adjustments
Reminder on-screen timer
Lets you know when a preset length of time has passed by
displaying a countdown timer on the screen. This is useful
for timer cooking while you watch TV.
MENU
MENU
TV/VIDEO
1
2
Press
to call MENU
PICTURE
SOUND
screen.
FEATURE
TIMER
1
4
7
2
5
8
0
3
6
9
CH
CH
Press
/
to
CH-SETTING
select “TIMER”.
CH
CH
TIMER
3
4
Press
/
to
to
CH
CH
--:--
--:--
OFF
ON
display TIMER menu.
MENU
POSITION
VOLUME
CH
CH
Press
/
--:--
AV MODE NORMAL
select “ ”.
POWER
SAVE
MENU
CH SELECT
ADJUST MENU RETURN
NORMAL
TV
TIMER
5
6
Press
time.
/
to set
--:--
--:--
OFF
ON
POSITION
• Maximum time that can be preset is
12 hours and 50 minutes.
VOLUME
1:50
• The right example shows that the
Reminder will be activated after one
hour 50 minutes.
CH SELECT
ADJUST MENU RETURN
MENU
Press
screen appears.
until normal
• Five minutes before the preset
length of time expires (in the
example, after one hour and 45
minutes) and each minute
thereafter, the remaining time
appears on the screen for several
seconds.
0:05
0:04
0:03
0:02
0:01
0:00
• When the preset length of time has
passed, “ 0:00” flashes in red.
Flashing
• This function also works in the Standby mode. Power is automatically turned on five minutes before the
preset length of time expires. The TV set automatically returns to the Standby mode approximately 30
seconds after the preset time.
• The Reminder is cancelled if
on the TV set is pressed or if the power is otherwise interrupted.
• The timer can be set in ten-minute intervals.
NORMAL
• To cancel the timer setting, press
when “ ” is displayed on the left of “ ” so as to set the
timer to “- - : - -”.
E 23
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_23-26_EN
FLE (Malaysia) Sdn. Bhd.
Connections
Connecting to a DVD player
The DVD input terminals (COMPONENT-IN) on the rear of the TV can be used to input
high-quality images from a DVD player.
DVD input terminals
AV-2 IN
COMPONENT
Y
P
B
(CB)
TV
P
R
(CR)
To colour-difference
(component video)
out terminals
To audio out
(L/R) terminals
DVD player
Connecting the video terminals
OUT
A
V
-
1
I
N
A
V
-
2
I
N
COMPONENT
Y
S-VIDEO
(AV-1 IN)
L
PB
(CB
)
(MONO)
P
R
(CR
)
R
DVD input terminals
DVD player
Y
Y or Y/Y
COMPONENT-IN
PB (CB) PB (CB) or B-Y/Pb
PR (CR) PR (CR) or R-Y/Pr
VIDEO
Watching DVD Playback
COMPONENT
TV/VIDEO
1
Press
to select
TV/VIDEO
TV/VIDEO
“COMPONENT”, DVD input
1
4
7
2
5
8
0
3
6
9
screen.
CH
CH
MENU
2
Turn on the DVD player and
begin playback.
AV MODE NORMAL
POWER
SAVE
TV
• When connecting the TV to a DVD player via the Component-in terminals, the video and audio from the
DVD player cannot be output through the Audio/Video out terminals on the TV.
• Please refer to the operation manual of your DVD player for more information.
• Be sure to fully insert the plugs of the connecting cables into the terminals on the TV set and video
equipment. Failure to do so may result in noise.
• Before connecting the cables, turn off the power of the TV set and video equipment.
• Always remove the cables from the terminals by the plugs and not the cables themselves.
E 24
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_23-26_EN
FLE (Malaysia) Sdn. Bhd.
Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of
the types of connections that are used for coaxial and feeder cables.
If your outdoor antenna uses a 75-ohm coaxial cable with a standard
DIN45325 plug (IEC 169-2), plug it into the antenna jack at the rear of the
set.
If your outdoor antenna uses a 300-ohm twin-lead flat feeder, connect a
300-ohm to 75-ohm impedance converter and plug it into the antenna jack
at the rear of the set.
TV
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable) (not supplied)
OUT
A
V
-
1
I
N
A
V
-
2
I
N
COMPONENT
Y
S-VIDEO
(AV-1 IN)
L
PB
(CB
)
(MONO)
P
R
(CR
)
R
300-ohm twin-lead
flat feeder
(not supplied)
75-ohm impedance
converter
(not supplied)
Antenna in
Connecting to an antenna via a VCR
You can also connect the TV set to the tuner on a VCR using the connection shown below.
VCR
TV
OUT
A
V
-
1
I
N
A
V
-
2
I
N
COMPONENT
Y
S-VIDEO
(AV-1 IN)
L
PB
(CB
)
(MONO)
P
R
(CR)
R
To antenna in
terminal
To RF out
terminal
Antenna in
• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.
• Turn off the power on the TV set and the VCR being connected before making the above connections.
Be sure the cord plugs are fully inserted in the connection terminals.
• See the operation manual of your VCR for connection details.
E 25
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_23-26_EN
FLE (Malaysia) Sdn. Bhd.
Connections
Connecting to video equipment
Enjoy playback from a video disc player, VCR or other video equipment by connecting
them to this TV set using the Audio/Video in terminals.
Example use of front terminals
VCR
DVD Player
TV
Camcorder
Video Game
POWER
SAVE
O
N
T
I
M
E
R
P
U
S
H
BUTTON
Behind the door
AV-3 IN
VIDEO
(MONO) L-AUDIO-R
AV-3 IN
To Audio/Video
out terminals
Example use of rear terminals
TV
For Recording and Editing
VCR
OUT
A
V
-
1
I
N
A
V
-
2
I
N
COMPONENT
Y
S-VIDEO
(AV-1 IN)
L
PB
(CB
)
(MONO)
P
R
(CR)
R
To Audio/
Video out
terminals
For Playback
VCR
OUT
AV-1 IN AV-2 IN
To Audio/
Video in
terminals
S-VIDEO
(AV-1 IN)
L
(MONO)
R
To S-Video
out terminals
DVD Player
To Audio out
terminals
• The S-Video Terminal has the priority over the AV terminal.
• The S-Video Terminal and Audio (L-R) terminals must be connected to playback DVD.
• Turn off the power on the TV set and the VCR being connected before making the above connections.
Be sure the cord plugs are fully inserted in the connection terminals.
• For playback of monaural audio, connect the external source to the audio input left terminal on the front
or rear of the TV set (MONO) to hear the same sound from both speakers.
• The audiovisual cords required to connect the TV set with video equipment may differ from those shown
in the above diagram. See the operation manual of your video equipment for connection details.
• The above recording and editing connections are for intended solely for personal use and not for
the illegal copying of audiovisual material protected by copyright laws.
E 26
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_27-30_EN
FLE (Malaysia) Sdn. Bhd.
Troubleshooting
The following problems do not always indicate a hardware failure. Therefore, please use
the troubleshooting guide below before calling for repair service.
If, after following the guide none of the remedies work, unplug the TV set and call for
service.
Quick
Service
Check List
Possible Causes/Remedies
Try a new channel to check for possible
station trouble.
TV not plugged in.
Outlet power OFF.
POWER switch of TV not ON.
Antenna not connected to terminal at the
back of the TV set.
If outside antenna is used, check for
broken wires.
Check for local interference.
Turn OFF using the POWER switch,
then turn ON again after a minute.
Adjust COLOUR control.
Check batteries in the remote control.
Try fine tuning to correct.
Contrast setting in picture mode might be all the
way to the minus side. Press the NORMAL button
on the remote control to correct.
Increase the volume.
• This unit is equipped with a microprocessor. Its performance could be adversely affected by external
electrical noise or interference. If this should happen, unplug the unit and plug it in again after a few
minutes.
E 27
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_27-30_EN
FLE (Malaysia) Sdn. Bhd.
Specifications
MODEL
CX68N5
Receiving System
TV Broadcasts/
VCR Playback
PAL-B/G
VCR Playback
PAL 60 Hz
(Using Video-in terminals)
NTSC 3.58 MHz
NTSC 4.43 MHz
Laserdisc
PAL 5.5 MHz/60 Hz
Player Playback
(Using RF-in terminals)
VCR Playback
(Using S-Video terminal)
S-VIDEO NTSC 3.58 MHz
S-VIDEO NTSC 4.43 MHz
S-VIDEO PAL
Special VCR and VDP
Playback
Video-in 50/60 Hz
S-VIDEO in 50/60 Hz
Reception Channels
PAL-B/G
VHF
UHF
AU0-AU12 ch, E2-E12 ch
E21–E69 ch
CATV
S1–S20 ch, S21–S41 ch (Hyper)
44.25 MHz – 863.25 MHz
Receiving Frequency
Channel Tuning
Picture Tube
Terminals
100-channel Electronic Tuner with Full Auto Tuning System
68 cm Tinted
Audio/Video input × 3 (Front × 1, Rear × 2)
Audio/Video output × 1 (Rear)
Headphone jack (Front × 1)
S-Video input × 1 (Rear)
DVD input (COMPONENT-IN) × 1 (Rear)
Sound Output
Power Source
Power Consumption
Dimensions
7.5 W (RMS) × 2
Rated AC 220–240V, 50 Hz
145 W
800 (W) × 583 (H) × 497 (D) mm
38.5 kg (Approx.)
Weight
• Design and specifications are subject to change without notice.
• Receiving system: These receiving systems, encompassing all currently available technology, include
those with planned broadcast, videotape and laserdisc hardware and software.
• Reception channels: Some examples of the main receivable channels are shown above.
E 28
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_27-30_EN
FLE (Malaysia) Sdn. Bhd.
Notes
E 29
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_27-30_EN
FLE (Malaysia) Sdn. Bhd.
Notes
E 30
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
CX68N5_BC_EN
FLE (Malaysia) Sdn. Bhd.
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve (12)*
months from the date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service
Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified
herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for
repair.
This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury
caused by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage,
vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
IMPORTANT
DO NOT RETURN THIS PAGE TO SHARP
For your reference, please enter the particulars of your purchase below and retain, with your purchase
documentation.
Model No.
Serial No.
Date of Purchase
Retailer
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR
LOCAL
SHARP APPROVED SERVICE CENTRE
LOOK ON THE WEB AT
OR CALL SHARP
1 300 135 022
SHARP CORPORATION OF AUSTRALIA PTY. LIMITED
A.B.N. 40 003 039 405
1 Huntingwood Drive Blacktown NSW 2148
IMPORTANT NOTICE: This warranty applies only to products sold in Australia
SHARP CORPORATION
Printed in Malaysia
TINS-A574WJZZ
03P01-MSF
Dimension: 176 x 250 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
|